Caused by changed behaviour of offset/expand functions when called on CW polygons (holes) after 7ff76d0768. When it is called expand on CW polygons (holes), they shrunk instead of expanded.
Cache directory is newly deleted before it is imported from the newer
config location.
Linux specific: When asking for certificate directory, perform import
of configs first.
Using a float instead of a double caused accumulation of error in the calculated distance, which in rare cases triggered an assert in get_shortest_direction().
Fuzzy skin will be disabled for regions with
with fuzzy_skin_point_dist < 0.01 or fuzzy_skin_thickness.value < 0.001
as the first one creates excessive long extrusions while the second
one does not modify the perimeters.
Support for oneTBB from oneAPI, where Intel reworked and deprecated
some interfaces.
Implements some of TBB universal fix (2020/2021 fixes) #7332
This one adds TBB_HAS_GLOBAL_CONTROL for the up to date oneTBB.
With solid_infill_every_layers = 1 the new solid layer should be solid
infill not solid bridging infill. Once the layer is correctly classified
as solid with solid_infill_every_layers = 1, everything works as expected.
For this particular model, ClipperLib numerical instability causes
one of the internal surfaces to turn into bridging surfaces
on reslicing. The issue was fixed by reverting to untyped slices if possible.
When propagating overhangs to be supported, the regions are newly
properly merged and regularized.
Fix of Stuck at "preparing infill" with "only infill where needed" enabled 1.41.2 #1696
"Only infill where needed" makes slicer crash for some models #6385
[BUG] Slicing stuck for 14h now, 0.8 NZL Ender 5+ Gyroid infill only where need
first_layer_height cannot be changed to ConfigOptionFloat, that would break loading of old 3MFs.
The relative values from 3MFs should already be converted to absolute in `Preset::normalize`, what is missing is the UI check.
+ Code refactoring for OptionsGroup::create_single_option_line():
Don't clear label value in an Option. This value is used in Field::get_value_by_opt_type() to show error "%s doesn't support percentage".
=> At functions OG_CustomCtrl::CtrlLine::render() and OG_CustomCtrl::CtrlLine::get_pos() added check if current line has more than one option.
=> Draw option's label only when line has several options.
fixes#7341
CGAL upstream CMake config will lock in the major version if installed as a distro package and will not provide any version info if compiled and installed from upstream. As of this commit, PrusaSlicer can be built with CGAL 4.13.2, and 5.0 but there is no universal way to specify the minimum version that would work with static dependencies and linux packages.
sorry #4912
1) Areas inside modifier meshes were ironed multiple times.
2) Ironing areas were not properly merged.
Layer::lslices were not always properly merged with modifier meshes
applied, which lead to the ironed surface being split and not fully
ironed, as there were artificial gaps created between regions as if
they were covered by perimeters (we don't iron over perimeters).
Fixes Fan starts at first layer, even though disabled for first layer. #7232
This is a regression due to cooling refactoring, which cooled
support layers independently from object layers. The bug here was that
all the raft layers were cooled together with the first object layer.
Previously, the Cursor (Sphere or Circle) was repeatedly applied between two mouse positions, creating brushstrokes with ripples on the edges between those mouse positions.
Now, a single capsule (3D or 2D) is applied between those mouse positions, which creates brushstrokes without these ripples.
This was a regression of 2.4.0-alpha1 wrt. 2.3.3, where handling of
multiple volumes was refactored.
As a result, handling multi-part objects with clip_multipart_objects
disabled was broken.
With clip_multipart_objects disabled, the multi-part objects no more
clip one another and it is sole responsibility of the user to handle
overlaps.
Fixes "add part" error - PrusaSlicer 2.4.0 b2 #7366
This is a regression wrt. to PrusaSlicer 2.3.3 due to refactoring
of the slicing process for better multi material support
and to support negative volumes.
see pull request #7323 for discussion what went wrong.
The original issue
Fix of Print::apply() creating hierarchy of regions for complex scenarios:
Unnecessary regions were created for a modifier over a volume or a modifier,
where the modifier did not modify any of its parent's properties.
This lead to an explosion of regions for this particular 3MF.
Fixes Non Responsive & Memory Leak when opening or changing this 3MF project #7220
After a0ee41770d
quite often regions were not re-regenerated. This shoul now be fixed
together with the original slowness & memory leak issue.
(Fixed missing sinking property in objects list for multipart objects
with a part completely below the printbed):
It was not possible to slice an object with some part completely below
the print bed. The BuildVolume collision check newly supports
a "completely below print bed" return status,
Model evaluates this "completely below print bed status" allowing
objects with some volumes completely below the print bed to print.
circular, convex, concave) and performs efficient collision detection agains these build
volumes. As of now, collision detection is performed against a convex
hull of a concave build volume for efficency.
GCodeProcessor::Result renamed out of GCodeProcessor to GCodeProcessorResult,
so it could be forward declared.
Plater newly exports BuildVolume, not Bed3D. Bed3D is a rendering class,
while BuildVolume is a purely geometric class.
Reduced usage of global wxGetApp, the Bed3D is passed as a parameter
to View3D/Preview/GLCanvas.
Convex hull code was extracted from Geometry.cpp/hpp to Geometry/ConvexHulll.cpp,hpp.
New test inside_convex_polygon().
New efficent point inside polygon test: Decompose convex hull
to bottom / top parts and use the decomposition to detect point inside
a convex polygon in O(log n). decompose_convex_polygon_top_bottom(),
inside_convex_polygon().
New Circle constructing functions: circle_ransac() and circle_taubin_newton().
New polygon_is_convex() test with unit tests.
Activates only if PrusaSlicer.ini does NOT contains any FFF printers.
Added only_default_printers() function to activate wizard if none printers are installed.
- Unified preferences settings. version_check option is replaced with notify_release that has 3 states.
- fixed logic when show notification based on version string.
- notification shows released version
- dialog notifying new version is never showing if external updater is running.
Escape quotes inside path to external updater
+ Added nsvgParseFromFileWithReplace() to replace some colors before parsing from SVG file
+ Thumbnails are saved with selected resin color in SL1 or SL1S files
+ "white" folder is deleted from "icons" now. THere is no needed anymore.
Previously, colored polygons were stored so that each polygon had a color assigned to it, which made it difficult to perform operations like union or so on all polygons of the same color. Now polygons are stored grouped by their assigned color/extruder.
* Refreshed title bar for all Dialogs and MainFrame
* Refreshed header of the DataViewCtrl and ListView
* Refresh tooltips
* Redraw SpinCtrls
* Use system menu with is colored in respect to the color mode
* Preferences: Added parameter "Use system menu for application" and moved to the "Dark mode" tab with "Enable Dark mode parameter"
did not change compared to the preceding value creating empty "G1" lines.
The empty "G1" lines are now removed.
Improves Features fail with extra G1 moves when above a certain layer height and Detect Thin Walls is enabled #5176
Improves Thin wall detection causes miniature loops to be added, and emits empty G1 commands #3058
Find if there is more recent config in other folders (alpha / beta / release).
If yes, ask user, make snapshot, copy files.
if there is no current config, ask user and copy recent one.
Unnecessary regions were created for a modifier over a volume or a modifier,
where the modifier did not modify any of its parent's properties.
This lead to an explosion of regions for this particular 3MF.
Fixes Non Responsive & Memory Leak when opening or changing this 3MF project #7220
"with sheath" now again uses the lighweight zig-zag algorithm
for the sparse support columns, while PrusaSlicer 2.4.0-alpha1
to PrusaSlicer 2.4.0-beta1 used the new "stable" zig-zag
algorithm for both the non-sheathed and sheathed sparse support columns
creating unnecessarily thick support column perimeters.
{num_objects} - number of printable objects on the plater.
{num_instances} - number of printable instances on the plater, adding up
all printable instances of all objects.
Implements #2735#3339#4607
round() rounds to an integer.
This is a popular request, for example #3472
digits(value, num_digits, num_decimals) rounds to num_digits and
num_decimals, left filled with spaces.
digits(value, num_digits) the same as digits(value, num_digits, 0)
Neither decimal separator nor any decimals after decimal separator
are emitted.
zdigits(...) is the same as digits(...) only left filled with zeros.
If the result does not fit num_digits, the result is never trimmed.
support blockers / enforcers.
All slicing functions shall produce consistent results with the same mesh, same transformation matrix and slicing parameters.
Namely, slice_mesh_slabs() shall produce consistent results with slice_mesh() and slice_mesh_ex() in the sense, that projections made by
slice_mesh_slabs() shall fall onto slicing planes produced by slice_mesh().
Before this commit, slice_mesh_slabs() projected bottom facing faces upwards to its coplanar slicing plane,
which is different from how slice_mesh() or slice_mesh_ex() work, leading to ignored support enforcer / blocker strokes.
