Alessandro Ranellucci
|
5639132dae
|
Bugfix: the region_volumes vector was not always extended after creating new regions, causing bad memory access in apply_config(). #2446
|
2014-12-24 18:35:59 +01:00 |
|
Alessandro Ranellucci
|
33f7b08c80
|
Fix t/support.t after changing contact distance on top surfaces
|
2014-12-24 12:11:30 +01:00 |
|
Alessandro Ranellucci
|
19548fe301
|
Don't perform wiping if we have just changed layer and no extrusions were performed before the first retraction. Includes regression test. #2214
|
2014-12-24 12:02:42 +01:00 |
|
Alessandro Ranellucci
|
9dd228df01
|
Enable the GLU tesselator on MSW if we have a recent OpenGL module
|
2014-12-24 11:49:27 +01:00 |
|
Alessandro Ranellucci
|
4848cb7606
|
Ported PrintObject::bridge_over_infill() to XS
|
2014-12-24 10:20:55 +01:00 |
|
Alessandro Ranellucci
|
ea40c4d1b0
|
Fixed rendering of multiple interlaced layers in toolpaths preview
|
2014-12-24 01:34:35 +01:00 |
|
Alessandro Ranellucci
|
5d3cd792eb
|
Make infill_only_where_needed idempotent. #2198
|
2014-12-24 01:29:36 +01:00 |
|
Alessandro Ranellucci
|
350d634433
|
Enable extruder_offset configuration for first extruder. #2224
|
2014-12-24 00:34:17 +01:00 |
|
Alessandro Ranellucci
|
9cb6dc768f
|
Limit the Perl version warning to 5.16, as 5.18 seems to work fine
|
2014-12-24 00:19:20 +01:00 |
|
Alessandro Ranellucci
|
91bc4d8157
|
Bugfix: a typo caused wrong loop splitting, thus wrong ordering of perimeters having bridging parts. Includes regression test. #2258
|
2014-12-24 00:11:29 +01:00 |
|
Alessandro Ranellucci
|
c63d5da5c2
|
Move dump_perl() to Slic3r::Polyline
|
2014-12-24 00:11:13 +01:00 |
|
Alessandro Ranellucci
|
d47e12f05c
|
Bugfix: a wrong optimization caused some top-level perimeters not to be sorted using the nearest-neighbor search. #2322
|
2014-12-24 00:10:31 +01:00 |
|
Alessandro Ranellucci
|
af446dc7d4
|
Apply contact distance to first support layer above object's top surfaces too. #1939
|
2014-12-23 22:18:43 +01:00 |
|
Alessandro Ranellucci
|
25bc8e6f29
|
Smarter automatic disabling of GUI fields + reordering of Print Settings pages + minor adjustments to tooltips
|
2014-12-23 20:47:11 +01:00 |
|
Alessandro Ranellucci
|
092b1724ba
|
Fixed t/vibrationlimit.t
|
2014-12-23 11:23:12 +01:00 |
|
Alessandro Ranellucci
|
473802ce8c
|
Use support material interface extruder for layers above object's top surfaces too. #1939
|
2014-12-23 01:04:25 +01:00 |
|
Alessandro Ranellucci
|
a1a88baa68
|
Revert printf to debugf
|
2014-12-23 01:04:20 +01:00 |
|
Alessandro Ranellucci
|
6a939eb250
|
Fight deadlocks
|
2014-12-22 19:47:39 +01:00 |
|
Alessandro Ranellucci
|
bb907fb405
|
Don't trigger the on_move callback upon simple object selection with no dragging action
|
2014-12-22 19:34:19 +01:00 |
|
Alessandro Ranellucci
|
faed500520
|
Refresh slider when reloading print in toolpath preview canvas
|
2014-12-22 18:56:16 +01:00 |
|
Alessandro Ranellucci
|
0ded18207b
|
Adapt t/fill.t to the new infill internal API
|
2014-12-22 17:29:23 +01:00 |
|
Alessandro Ranellucci
|
e49cf2c55f
|
Refactored Line infill implementation
|
2014-12-22 17:25:52 +01:00 |
|
Alessandro Ranellucci
|
64061267c8
|
Align infill across layers regardless of first-layer-specific extrusion width. Includes a good internal API refactoring and a fix to 3D honeycomb flow
|
2014-12-22 16:47:35 +01:00 |
|
Alessandro Ranellucci
|
93507bfd49
|
Bugfix: only_retract_when_crossing_perimeters was not correctly applied on bottom layer when no bottom solid layers were printed
|
2014-12-22 11:46:16 +01:00 |
|
Alessandro Ranellucci
|
540c2b8705
|
Minor additions for debugging
|
2014-12-22 11:37:28 +01:00 |
|
Alessandro Ranellucci
|
45cc204f74
|
Center hilbertcurve, archimedeanchords, octagramspiral around object's center and align them across layers
|
2014-12-22 11:16:01 +01:00 |
|
Alessandro Ranellucci
|
1b582ea66a
|
Remove the "(slow)" mark on infill patterns that used to be slow in the past
|
2014-12-22 10:48:05 +01:00 |
|
Alessandro Ranellucci
|
bdce1ded7e
|
Disable cross-hatching for hilbertcurve, archimedeanchords, octagramspiral
|
2014-12-22 10:47:09 +01:00 |
|
Alessandro Ranellucci
|
5cd3ef7b8a
|
Bugfix: PlanePath infills sometimes did not cover the whole area. #863 #1162
|
2014-12-22 00:18:45 +01:00 |
|
Alessandro Ranellucci
|
74f25ef52f
|
Consolidated all PlanePath classes in a single file
|
2014-12-21 23:43:53 +01:00 |
|
Alessandro Ranellucci
|
1485659726
|
Minor rewording. #2411
|
2014-12-21 23:40:05 +01:00 |
|
Alessandro Ranellucci
|
583b009d1b
|
Honor print bed center in Quick Slice. #2440
|
2014-12-21 23:29:31 +01:00 |
|
Alessandro Ranellucci
|
4fc955a0fd
|
Fixed concave_points() and convex_points() after recent change of ccw_angle()
|
2014-12-21 23:10:38 +01:00 |
|
Alessandro Ranellucci
|
7253dc699a
|
Some more work on wireframe
|
2014-12-21 22:52:18 +01:00 |
|
Alessandro Ranellucci
|
c21a254480
|
Incomplete work for wireframe
|
2014-12-21 22:52:18 +01:00 |
|
Alessandro Ranellucci
|
5b51832b62
|
Wireframe.pl wireframe
|
2014-12-21 22:52:18 +01:00 |
|
Alessandro Ranellucci
|
9ac60dca1a
|
Fixed vibration limit.
|
2014-12-21 12:39:19 +01:00 |
|
Alessandro Ranellucci
|
795c85d30e
|
Apply a true double-ended nearest-neightbor search to thin fills in order to minimize travel moves between them. #2213
|
2014-12-20 22:40:43 +01:00 |
|
Alessandro Ranellucci
|
79ac29b435
|
Increase inset overlap tolerance
|
2014-12-20 22:40:34 +01:00 |
|
Alessandro Ranellucci
|
632e3d3067
|
Added an explicit warning when user has old threads.pm version. #2348
|
2014-12-17 14:53:36 +01:00 |
|
Alessandro Ranellucci
|
38ecce0ce9
|
Disable the GLU tesselator on MSW
|
2014-12-17 14:41:58 +01:00 |
|
Alessandro Ranellucci
|
34a49086e5
|
Added code for potential antialiasing
|
2014-12-17 14:28:25 +01:00 |
|
Alessandro Ranellucci
|
a0dda36df0
|
Minor fix to BridgeDetector
|
2014-12-17 01:21:12 +01:00 |
|
Alessandro Ranellucci
|
21ea100d0e
|
Fixed tests
|
2014-12-17 01:15:47 +01:00 |
|
Alessandro Ranellucci
|
9264db7ecd
|
Removed useless thing added in e79aa2e81c
|
2014-12-17 00:52:01 +01:00 |
|
Alessandro Ranellucci
|
c00061678b
|
Use perimeter extruder for brim. #618
|
2014-12-17 00:45:05 +01:00 |
|
Alessandro Ranellucci
|
e79aa2e81c
|
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
|
2014-12-17 00:34:00 +01:00 |
|
Alessandro Ranellucci
|
d9cffeca4a
|
Bugfix: adjust skirt flow according to each layer's height. #2307
|
2014-12-16 18:55:16 +01:00 |
|
Alessandro Ranellucci
|
99deffef62
|
Bugfix: use the external motion planner when extruding skirt and brim. #2412
|
2014-12-16 18:13:38 +01:00 |
|
Alessandro Ranellucci
|
a200498eef
|
Minor fix to view-toolpaths.pl
|
2014-12-16 18:13:31 +01:00 |
|