Alessandro Ranellucci
217a6f2525
Bugfix: any retraction_lift value different from "0" caused no retraction before layer changes. #453
2012-06-17 19:36:02 +02:00
Alessandro Ranellucci
061e819825
Merge pull request #455 from henrikbrixandersen/readme
...
Synchronize usage with actual --help output
2012-06-17 10:09:56 -07:00
Alessandro Ranellucci
7d6545dd07
Further simplification of point_in_polygon()
2012-06-17 19:09:11 +02:00
Alessandro Ranellucci
4f5870fdb6
Merge pull request #454 from beanz/trivial-speed-up-point-in-polygon
...
Simplify creation of $n, @x and @y in point_in_polygon test.
2012-06-17 10:06:11 -07:00
Alessandro Ranellucci
cde9f509d5
Merge pull request #456 from henrikbrixandersen/version
...
Add --version argument
2012-06-17 08:34:31 -07:00
Henrik Brix Andersen
8a6b3f7449
Synchronize usage with actual --help output
2012-06-16 17:31:28 +02:00
Henrik Brix Andersen
c50cabe095
Add --version argument
2012-06-16 17:16:50 +02:00
Mark Hindess
2ef565fc4d
Simplify creation of $n, @x and @y in point_in_polygon test.
...
Gives 30% speed up on simcop2387's coaster on my laptop and it cuts the
maximum resident set size too. I know this is going to be replaced but
thought this might be useful in the meantime.
2012-06-16 08:28:37 +01:00
Alessandro Ranellucci
4d2a813450
Bump version number
2012-06-14 20:26:58 +02:00
Alessandro Ranellucci
a2c0e4a674
Releasing 0.8.3
2012-06-14 19:13:04 +02:00
Alessandro Ranellucci
ca8a91b2b0
Only apply arc compensation to circular holes. #418
2012-06-14 15:06:22 +02:00
Alessandro Ranellucci
b00d960f4d
Merge pull request #450 from henrikbrixandersen/growl
...
Move Growl::GNTP handling to Slic3r::GUI
2012-06-14 05:35:25 -07:00
Henrik Brix Andersen
129f0fa904
Move Growl::GNTP handling to Slic3r::GUI to allow notifications from both Slic3r::GUI::SkeinPanel and Slic3r::GUI::Plater.
2012-06-14 13:49:50 +02:00
Alessandro Ranellucci
23edd7587f
Merge pull request #449 from olasd/master
...
Fix Slic3r::Polygon's boost_linestring method to properly close the polygon
2012-06-14 04:48:03 -07:00
Nicolas Dandrimont
4296ea6da1
Slic3r::Polygon's boost_linestring method needs to close the contour.
...
This prevented Slic3r from detecting some bridge supporting edges
(basically, if that edge was the last one in the contour). This
addresses some of the bridge detection issues (#414 , #358 ).
2012-06-14 13:33:59 +02:00
Alessandro Ranellucci
74f92aa686
Merge pull request #443 from henrikbrixandersen/about
...
Various fixes/additions to the About dialog handling
2012-06-13 01:05:51 -07:00
Henrik Brix Andersen
3aa901f149
Show version and description in About dialog
2012-06-12 23:51:59 +02:00
Henrik Brix Andersen
65d6a83672
wxID_EXIT is already imported, no need to specify package name
2012-06-12 23:47:59 +02:00
Henrik Brix Andersen
230d4377c9
Fix display of special menu items (wxID_ABOUT, wxID_EXIT) on OS X
2012-06-12 23:46:50 +02:00
Alessandro Ranellucci
3c66ea3134
Merge pull request #439 from henrikbrixandersen/master
...
Add temp Build.PL files to .gitignore
2012-06-12 07:30:48 -07:00
Alessandro Ranellucci
b926e0b27d
Support material lines need to be white
2012-06-11 20:42:39 +02:00
Alessandro Ranellucci
55ed4af06e
DLP support material in SVG output (untested)
2012-06-11 14:47:48 +02:00
Henrik Brix Andersen
bff76db3fc
Ignore generated artifacts
2012-06-11 14:12:23 +02:00
Alessandro Ranellucci
1f35a3f6aa
Fixed regression preventing SVG export to work properly. #428
2012-06-11 13:50:38 +02:00
Alessandro Ranellucci
71c1c66985
Label and CLI option were wrong for top_solid_infill_speed. #425
2012-06-11 13:45:03 +02:00
Alessandro Ranellucci
c0c84d13b8
Always set bed temperature after first layer if first layer temperature is set. #427
2012-06-11 13:43:23 +02:00
Alessandro Ranellucci
3e94add8a8
Pass config options as environment variables to post-processing scripts
2012-06-09 17:52:03 +02:00
Alessandro Ranellucci
62bd33a766
Fixed regression causing fatal errors. #429
2012-06-09 15:53:14 +02:00
Alessandro Ranellucci
0c4b112718
Fixed regression preventing arcs to be generated at all (center detection is still buggy)
2012-06-07 19:53:27 +02:00
Alessandro Ranellucci
c0c53c4397
Fill gaps. #281
2012-06-07 15:31:51 +02:00
Alessandro Ranellucci
00c6b1bdf8
Bugfix: some thin walls still gave a fatal error. #416
2012-06-07 12:21:33 +02:00
Alessandro Ranellucci
0226039dfb
Fixed regression when cooling is enabled
2012-06-07 11:38:54 +02:00
Alessandro Ranellucci
caa32ab282
Fixed regression causing flow errors when using legacy config files. #421
2012-06-07 11:24:45 +02:00
Alessandro Ranellucci
709c444976
Fixed fatal error when using --first-layer-extrusion-width
2012-06-07 11:17:35 +02:00
Alessandro Ranellucci
5c9916dc75
Some basic ability to close holes in non-manifold models
2012-06-06 22:28:23 +02:00
Alessandro Ranellucci
85ef7ce665
Bugfix: many thin walls were not detected correctly. #313
2012-06-06 21:27:39 +02:00
Alessandro Ranellucci
fbfbfac2b6
New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151
2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
2ccb443c2f
Bugfix: not retracting between infill of different islands using low infill densities. #242
2012-06-06 19:38:35 +02:00
Alessandro Ranellucci
58a696e666
Lift Z when changing layer too
2012-06-06 19:20:43 +02:00
Alessandro Ranellucci
8883df6692
Warn user when object couldn't be split
2012-06-06 19:00:34 +02:00
Alessandro Ranellucci
13e10abbbe
Fixed regression causing some models not to be sliced correctly. #410
2012-06-06 18:57:46 +02:00
Alessandro Ranellucci
c7af74884f
Legacy config files were not correctly supported
2012-06-06 18:47:11 +02:00
Alessandro Ranellucci
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
d412820733
Update: preview area was not updating to the largest side of the build area
2012-06-06 16:18:41 +02:00
Alessandro Ranellucci
16b774603c
Accept either absolute or relative values for --first-layer-height. #151
2012-06-06 16:11:38 +02:00
Alessandro Ranellucci
896c7e952e
Renamed bottom_layer_speed to first_layer_speed for consistency
2012-06-06 15:52:21 +02:00
Alessandro Ranellucci
4a188f8566
Support for legacy config files containing bottom_layer_speed_ratio. #151
2012-06-06 15:48:14 +02:00
Alessandro Ranellucci
91ffb74429
Accept either absolute or relative values for --bottom-layer-speed. #151
2012-06-06 15:43:54 +02:00
Alessandro Ranellucci
aedb6cc35f
Accept both relative and absolute extrusion width values. #151
2012-06-06 15:23:34 +02:00
