Alessandro Ranellucci
|
8a031fe501
|
New --first-layer-extrusion-width option. #385
|
2012-06-06 17:29:12 +02:00 |
|
Alessandro Ranellucci
|
896c7e952e
|
Renamed bottom_layer_speed to first_layer_speed for consistency
|
2012-06-06 15:52:21 +02:00 |
|
Alessandro Ranellucci
|
91ffb74429
|
Accept either absolute or relative values for --bottom-layer-speed. #151
|
2012-06-06 15:43:54 +02:00 |
|
Alessandro Ranellucci
|
4db416773c
|
Fixed typos in bed temperature M-codes. #386
|
2012-05-29 09:40:42 +02:00 |
|
Alessandro Ranellucci
|
ce6b4aeaee
|
New option to print each object completely before moving onto next one (watch out for extruder collisions, Slic3r isn't doing any check since it doesn't know its shape)
|
2012-05-20 20:08:59 +02:00 |
|
Alessandro Ranellucci
|
fa4f2c8b97
|
New option to randomize starting points across layers
|
2012-05-19 22:36:29 +02:00 |
|
Alessandro Ranellucci
|
22f8d57b36
|
Memory optimizations broke thin walls
|
2012-05-19 19:40:51 +02:00 |
|
Alessandro Ranellucci
|
b246480535
|
Massive reduction of memory usage (down to one third).
|
2012-05-19 17:57:38 +02:00 |
|
Alessandro Ranellucci
|
aa9563f00b
|
More constants, less strings => ess memory usage
|
2012-05-19 15:40:11 +02:00 |
|
Alessandro Ranellucci
|
2d67d6b0b6
|
Restore 100% flow for support material
|
2012-05-17 22:57:59 +02:00 |
|
Alessandro Ranellucci
|
2a6ad2f3f7
|
Bugfix: removed warnings. #365
|
2012-05-13 22:56:40 +02:00 |
|
Alessandro Ranellucci
|
d58a741d99
|
Put layer number in G-code comments. #327
|
2012-05-01 15:06:19 +02:00 |
|
Alessandro Ranellucci
|
d8b8470d54
|
Retract before changing tool. #319
|
2012-05-01 14:44:52 +02:00 |
|
Alessandro Ranellucci
|
3ed5171d20
|
Take bottom layer speed ratio into account when estimating layer time. #334
|
2012-05-01 11:48:22 +02:00 |
|
Alessandro Ranellucci
|
e7558ce16c
|
Bugfix: wrong flow amount for solid layers. #317
|
2012-04-17 09:29:41 +02:00 |
|
Alessandro Ranellucci
|
285caffa9c
|
Omit G92 if No Extrusion
|
2012-04-16 20:06:53 +02:00 |
|
Alessandro Ranellucci
|
8d851c24a9
|
Increase the flow rate for support material
|
2012-04-16 14:18:07 +02:00 |
|
Alessandro Ranellucci
|
96d5e513b8
|
Rename $Slic3r::resolution to $Slic3r::scaling_factor
|
2012-04-16 14:05:38 +02:00 |
|
Alessandro Ranellucci
|
d51ba94e8a
|
Remove XXX from dependencies
|
2012-04-16 14:03:36 +02:00 |
|
Alessandro Ranellucci
|
e3a9adae4d
|
Bugfix: use P instead of S for Mach3 for M106 too. #286
|
2012-03-27 10:26:10 +02:00 |
|
Alessandro Ranellucci
|
4d71ca3071
|
Enable G0 automatically for Mach3. #266
|
2012-03-26 12:22:12 +02:00 |
|
Alessandro Ranellucci
|
1a06e35687
|
New option to specify G-code to be used at layer change. #279
|
2012-03-26 12:14:15 +02:00 |
|
Alessandro Ranellucci
|
3cf5f86ce0
|
Avoid G92 for Mach3. #220
|
2012-03-04 11:49:04 +01:00 |
|
Alessandro Ranellucci
|
c7006fed26
|
Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245
|
2012-03-03 22:16:38 +01:00 |
|
Alessandro Ranellucci
|
170d29a789
|
New --cooling option and checkbox to enable/disable fan and cooling control
|
2012-02-25 21:56:36 +01:00 |
|
Alessandro Ranellucci
|
1d0a852679
|
Cooling and fan control. #110
|
2012-02-25 21:01:00 +01:00 |
|
Alessandro Ranellucci
|
c3fc6ee66b
|
Fix regression introduced with f2e1fe5241
|
2012-02-21 20:16:03 +01:00 |
|
Alessandro Ranellucci
|
94a2585b97
|
Dual extruder for support material
|
2012-02-19 17:02:49 +01:00 |
|
Alessandro Ranellucci
|
7b67fae686
|
Support material
|
2012-02-19 12:03:36 +01:00 |
|
Alessandro Ranellucci
|
e0e2023a5a
|
Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179
|
2012-02-19 10:48:58 +01:00 |
|
Alessandro Ranellucci
|
74c71b4ef2
|
Acceleration control. #185
|
2012-02-10 14:53:44 +01:00 |
|
Alessandro Ranellucci
|
3e65af7457
|
Revert "New First layer flow ratio option. #182"
This reverts commit 99ef0865bb.
|
2012-01-30 14:51:05 +01:00 |
|
Alessandro Ranellucci
|
99ef0865bb
|
New First layer flow ratio option. #182
|
2012-01-30 14:25:14 +01:00 |
|
Alessandro Ranellucci
|
eb33c03926
|
Bugfix: flow wasn't adjusted for first layer according to its height setting. #182
|
2012-01-30 14:03:12 +01:00 |
|
Alessandro Ranellucci
|
f1b1454b36
|
Loops were not closing well
|
2012-01-21 11:51:31 +01:00 |
|
Alessandro Ranellucci
|
1c7564e4a4
|
Thin walls. #24
|
2011-12-30 17:17:37 +01:00 |
|
Alessandro Ranellucci
|
caf41f07dd
|
Output required filament length and volume to command line and to the gcode file itself
|
2011-12-20 15:29:15 +01:00 |
|
Alessandro Ranellucci
|
d63eabcfa5
|
Clip less from loops to avoid gaps
|
2011-12-17 19:54:35 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|
Alessandro Ranellucci
|
8e04d763f4
|
Don't increase flow for overlapping purposes when bridging
|
2011-12-16 10:53:22 +01:00 |
|
Alessandro Ranellucci
|
d346bc02cc
|
Comments are now disabled by default, new --gcode-comments option to enable them
|
2011-12-14 19:49:21 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
0a74e068a3
|
Merge branch 'infill-overlap'
|
2011-12-08 10:53:24 +01:00 |
|
Alessandro Ranellucci
|
d9a70ea80d
|
Customizable overlap ratio (it defaults to 0.15 now)
|
2011-12-08 10:53:07 +01:00 |
|
Alessandro Ranellucci
|
d813aea59a
|
Don't slow down retractions on bottom layer. #101
|
2011-12-08 10:28:23 +01:00 |
|
Alessandro Ranellucci
|
53bc9c7421
|
Customizable speed for small perimeters. #60
|
2011-12-04 20:50:03 +01:00 |
|
Alessandro Ranellucci
|
0aff5fab24
|
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
|
2011-12-04 16:24:46 +01:00 |
|
Alessandro Ranellucci
|
52c9897eda
|
New --extrusion-axis option; removed --no-extrusion
|
2011-12-01 22:34:21 +01:00 |
|
Alessandro Ranellucci
|
e99c9f9e5f
|
Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77
|
2011-12-01 22:04:23 +01:00 |
|
Alessandro Ranellucci
|
92e86a2259
|
Bugfix: plate was lifted even when retracting for Z change
|
2011-11-28 19:59:39 +01:00 |
|