Alessandro Ranellucci
|
04c0caad0b
|
Fix honeycomb infill overlap with perimeters
|
2013-03-17 00:57:58 +01:00 |
|
Alessandro Ranellucci
|
090e3b1fe3
|
Rename shortest_path to chained_path, which reflects its algorithm more correctly
|
2013-02-05 17:27:45 +01:00 |
|
Alessandro Ranellucci
|
2963e54d21
|
Use the faster polygon_multi_linestring_intersection()
|
2013-01-28 00:32:19 +01:00 |
|
Alessandro Ranellucci
|
86f5cb8654
|
Previous commit about bridge spacing was incomplete
|
2012-11-16 18:10:09 +01:00 |
|
Alessandro Ranellucci
|
61047f0df5
|
Define perimeter/infill overlap over spacing instead of width and increase it slightly to compensate
|
2012-10-30 14:21:59 +01:00 |
|
Alessandro Ranellucci
|
be7e211bb6
|
Make flow_spacing required for ExtrusionPath objects
|
2012-10-30 14:07:01 +01:00 |
|
Alessandro Ranellucci
|
f2389682b6
|
Factor out some hard-coded settings
|
2012-10-29 00:23:33 +01:00 |
|
Alessandro Ranellucci
|
6beaf5e597
|
New faster algorithm for filling gaps, while we work on a new medial axis implementation
|
2012-10-24 16:17:09 +02:00 |
|
Alessandro Ranellucci
|
0990a9418c
|
Bugfix: honeycomb infill was overlapping too much with perimeters. #732
|
2012-10-22 13:38:37 +02:00 |
|
Alessandro Ranellucci
|
bbe0a45b58
|
Optimization: cache scaled flow width and spacing
|
2012-09-23 03:03:08 +02:00 |
|
Alessandro Ranellucci
|
e0d5f4e528
|
Replace 'scale epsilon' with 'scaled_epsilon'
|
2012-09-12 15:22:43 +02:00 |
|
Alessandro Ranellucci
|
bb5f00cf0c
|
Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666
|
2012-09-12 12:13:43 +02:00 |
|
Alessandro Ranellucci
|
5281b101f9
|
Some infill paths were still disconnected, causing unnecessary retractions
|
2012-08-24 18:59:23 +02:00 |
|
Alessandro Ranellucci
|
bf1aba3d08
|
New --support-material-pattern and --support-material-angle options
|
2012-06-23 22:43:23 +02:00 |
|
Alessandro Ranellucci
|
53d24bc580
|
Bugfix: some infill paths were not connected. #477
|
2012-06-23 20:27:28 +02:00 |
|
Alessandro Ranellucci
|
be8970b497
|
Fixed regression causing infill lines not being always connected near perimeters
|
2012-06-19 18:49:46 +02:00 |
|
Alessandro Ranellucci
|
82dd3c7a3e
|
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
|
2012-06-06 18:05:03 +02:00 |
|
Alessandro Ranellucci
|
8a031fe501
|
New --first-layer-extrusion-width option. #385
|
2012-06-06 17:29:12 +02:00 |
|
Alessandro Ranellucci
|
b360b2bcea
|
Fixed regression causing side gaps in solid infill
|
2012-05-19 21:57:47 +02:00 |
|
Alessandro Ranellucci
|
aa9563f00b
|
More constants, less strings => ess memory usage
|
2012-05-19 15:40:11 +02:00 |
|
Alessandro Ranellucci
|
4b7e9fc284
|
Fixed regression causing poor adhesion of rectilinear infill to perimeters
|
2012-05-04 20:51:09 +02:00 |
|
Alessandro Ranellucci
|
d51ba94e8a
|
Remove XXX from dependencies
|
2012-04-16 14:03:36 +02:00 |
|
Alessandro Ranellucci
|
fc76104aa7
|
Merge branch 'boost-geometry'
|
2012-04-10 15:52:44 +02:00 |
|
Alessandro Ranellucci
|
a8adff53ca
|
New implementation of support material
|
2012-04-09 22:06:30 +02:00 |
|
Alessandro Ranellucci
|
5bfe19a8b9
|
Huge speed Boost (pun intended). Also fixes a problem where infill was escaping perimeters sometimes (#305).
|
2012-04-09 11:04:32 +02:00 |
|
Alessandro Ranellucci
|
64892c2203
|
Bugfix: fatal error on some models. #255
|
2012-03-10 23:49:24 +01:00 |
|
Alessandro Ranellucci
|
4a72c77150
|
Maximize fill/perimeter contact for line infill pattern
|
2012-03-04 11:45:45 +01:00 |
|
Alessandro Ranellucci
|
be9886eac3
|
Bugfix: fill escapes perimeters. #139
|
2012-03-04 11:26:11 +01:00 |
|
Alessandro Ranellucci
|
be0e1a6e0b
|
Bugfix: fill escapes perimeters. However, we keep it disabled. #139
|
2012-02-25 22:41:53 +01:00 |
|
Alessandro Ranellucci
|
c98f6734c7
|
Code optimization
|
2012-02-25 22:18:07 +01:00 |
|
Alessandro Ranellucci
|
00c6287488
|
Bugfix: fill escapes perimeters. #139
|
2012-01-21 17:11:14 +01:00 |
|
Alessandro Ranellucci
|
63972a3a35
|
Some more overlap
|
2012-01-21 16:35:23 +01:00 |
|
Alessandro Ranellucci
|
0e23f20df1
|
Poor overlap between perimeters and infill
|
2012-01-21 11:48:03 +01:00 |
|
Alessandro Ranellucci
|
a3a9cf5749
|
Yet other things not changed when refactored. #163
|
2012-01-12 10:48:18 +01:00 |
|
Alessandro Ranellucci
|
8ed91a8ec4
|
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
|
2011-12-30 19:59:51 +01:00 |
|
Alessandro Ranellucci
|
ab0300bb70
|
Bugfix for recent solid infill adjustment math, to take float math into account
|
2011-12-22 18:55:18 +01:00 |
|
Alessandro Ranellucci
|
4af295bce3
|
Bugfix: very wrong infill for low density regions. #127
|
2011-12-19 09:55:03 +01:00 |
|
Alessandro Ranellucci
|
e5619ee543
|
Bugfix: not all paths were closed correctly due to float rounding
|
2011-12-18 11:53:15 +01:00 |
|
Alessandro Ranellucci
|
eca6d0b6d0
|
Adjust flow for solid surfaces when using concentric infill too. #120
|
2011-12-17 20:29:06 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|
Alessandro Ranellucci
|
cd0fd80a69
|
Restore better perimeter/infill overlap for solid surfaces
|
2011-12-16 18:37:43 +01:00 |
|
Alessandro Ranellucci
|
18cfc15ead
|
Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm)
|
2011-12-15 20:21:34 +01:00 |
|
Alessandro Ranellucci
|
569e737ae1
|
Only connect infill edges when not doing solid surfaces
|
2011-12-13 17:36:03 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
d9a70ea80d
|
Customizable overlap ratio (it defaults to 0.15 now)
|
2011-12-08 10:53:07 +01:00 |
|
Alessandro Ranellucci
|
0aff5fab24
|
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
|
2011-12-04 16:24:46 +01:00 |
|
Alessandro Ranellucci
|
86f3e4fcd2
|
Implemented a new "line" fill pattern. #20
|
2011-11-14 10:31:07 +01:00 |
|
Alessandro Ranellucci
|
a2b4f9f671
|
Use nozzle diameter as flow width when bridging
|
2011-11-13 18:21:25 +01:00 |
|
Alessandro Ranellucci
|
038caddcda
|
New fill types (hilbertcurve, archimedeanchords, octagramspiral) and ability to use different patterns for solid layers. #20
|
2011-11-13 18:14:02 +01:00 |
|
Alessandro Ranellucci
|
743f2abcf2
|
Detection of optimal infill direction for bridges. Includes many fixes and improvements.
|
2011-10-07 19:07:57 +02:00 |
|