enricoturri1966
c7771a576b
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_custom_gcode_detection
2021-04-21 12:32:17 +02:00
rtyr
8b41285e31
0.0.16 Updated CR6-SE start g-code. Added and updated filament profiles.
2021-04-20 20:38:27 +02:00
rtyr
b71fa0d634
Bumped up version to 0.0.16
2021-04-20 20:35:49 +02:00
rtyr
e25adaf221
Merge pull request #6394 from pmjdebruijn/creality
...
Creality Various
2021-04-20 20:33:39 +02:00
Pascal de Bruijn
2cb268c947
Revert "creality.ini: Extrudr NX2 slightly lower temps"
...
This reverts commit 41c56f2eb8
2021-04-20 18:13:21 +02:00
Pascal de Bruijn
d50c2872bd
creality.ini: disable explicit ABL for CR6-SE ( #6383 )
...
this is also better in line with Creality's intended behavior
2021-04-20 18:12:08 +02:00
rtyr
321a2b7639
Disabled thick bridges, updated support settings. Bundle refactoring.
2021-04-19 15:48:07 +02:00
Pascal de Bruijn
d33cffdd1e
creality.ini: remove parentheses for galaxy pla filament
...
since we've not using those for other filament subtypes
2021-04-16 19:32:32 +02:00
Pascal de Bruijn
2ffcf97be1
creality.ini: more accurate spool weights for Devil Design
...
I just noticed Devil Design uses identical spools to Extrudr NX-2
2021-04-16 19:30:33 +02:00
rtyr
ac813e8e76
Merge pull request #6357 from pmjdebruijn/creality
...
Creality Filament Updates
2021-04-15 22:20:07 +02:00
rtyr
57a73c5769
Updated MK2 and MK3 bed textures.
2021-04-15 10:42:55 +02:00
rtyr
4e5e4d4b49
Renamed Artillery thumbnails
...
Old ones were not displayed on Linux.
2021-04-14 18:53:05 +02:00
rtyr
b7b873d637
Delete x1_thumbnail.png
2021-04-14 18:52:12 +02:00
rtyr
3e2b299248
Delete genius_thumbnail.png
2021-04-14 18:52:02 +02:00
rtyr
dfe47aa4e4
Delete x1_thumbnail.png
2021-04-14 18:48:48 +02:00
rtyr
d2969e1558
Delete genius_thumbnail.png
2021-04-14 18:48:38 +02:00
rtyr
c492d0d109
Add files via upload
2021-04-14 18:48:06 +02:00
Pascal de Bruijn
10e914d9a9
creality.ini: add 3DJAKE ecoPLA Matt
...
the filament is very flowy, which means it prints well at lower temperatures.
and given the limited part cooling fan on most creality printers, it prints
less well at higher temperatures.
2021-04-14 18:00:09 +02:00
Pascal de Bruijn
d8f56ef5fd
creality.ini: add Devil Design approx spool weights
...
by manufacturer specifications:
https://devildesign.com/download/PLA_-_product_card.pdf
2021-04-14 17:59:55 +02:00
Pascal de Bruijn
41c56f2eb8
creality.ini: Extrudr NX2 slightly lower temps
...
After more practical testing, a slightly lower temp is beneficial on
small pointy areas, preventing them from being slightly deformed.
2021-04-13 19:09:54 +02:00
rtyr
1bf5654231
Updated min_slic3r_version
...
2.3.1-beta
2021-04-12 12:11:46 +02:00
rtyr
f711c825e1
Updated Creality resources and profiles
2021-04-12 12:07:54 +02:00
rtyr
4072ea9f60
Updated profiles and resources.
2021-04-12 12:05:41 +02:00
rtyr
5af4167b74
updated min_slic3r_version
2021-04-12 11:45:26 +02:00
rtyr
0ecf5dc1a0
Creality 0.0.15
2021-04-12 11:44:14 +02:00
rtyr
6121f1de3b
version bumped up to 0.0.15
2021-04-12 11:42:32 +02:00
rtyr
c68403ae78
updated min_slic3r_version
2021-04-12 11:40:55 +02:00
rtyr
2fad684c43
Update Anycubic.idx
2021-04-12 11:28:10 +02:00
rtyr
41acfd36c7
Bumped up version to 0.0.9
2021-04-12 11:27:29 +02:00
Vojtech Bubnik
978c3a6c89
Merge tag 'version_2.3.0' into stable
...
version_2.3.0
2021-04-12 11:06:09 +02:00
rtyr
19b52cf092
updated config_update_url
2021-04-08 14:13:40 +02:00
MarkMan0
2a1006bd71
Update for Inat printers
...
+ Improved start gcode
+ changed filename format
2021-04-08 13:45:37 +02:00
rtyr
acf8b66431
TriLAB update 0.0.7
...
https://github.com/prusa3d/PrusaSlicer-settings/pull/127
2021-04-07 13:04:29 +02:00
Pascal de Bruijn
d09871441a
creality.ini: add Tough PLAs
2021-04-05 17:24:16 +02:00
Pascal de Bruijn
744311f3c3
creality.ini: improve bridging
2021-04-04 15:24:57 +02:00
rtyr
525f05c975
updated min_slic3r_version to 2.4.0-alpha0
2021-03-29 09:38:59 +02:00
rtyr
507ba46ecc
updated min_slic3r_version to 2.4.0-alpha0
2021-03-29 09:38:01 +02:00
Pascal de Bruijn
7eaadf0e47
Revert "creality.ini: move Ender-3 specific extruder_clearance"
...
Due to #589 .
This reverts commit 34202f71e5
2021-03-01 23:56:08 +01:00
Pascal de Bruijn
45cbac0b7c
creality.ini: unhide new printers (except CR-X)
2021-03-01 19:00:04 +01:00
Pascal de Bruijn
065a129d47
creality.ini: remove single_extruder_multi_material_priming from printer section
2021-03-01 18:43:40 +01:00
Pascal de Bruijn
7fbb3a2b42
creality.ini: Add CR-5 Pro H
...
this is a high temp variant of the regular CR-5 Pro, with the
suspected all metal hotend, presumably the non-H variant has
a teflon lined hotend
related: 2d762ec320
2021-03-01 18:40:33 +01:00
Pascal de Bruijn
586ed35e3a
creality.ini: fix CR-5 Pro bed_shape
2021-03-01 18:34:18 +01:00
Pascal de Bruijn
f5863cd5d8
creality.ini: CR-200B also has a descending z axis
2021-03-01 18:24:44 +01:00
Pascal de Bruijn
5e78b0f24f
creality.ini: remove ignored renamed_from from *descendingz*
...
fixes: Nonpublic intermediate preset *descendingz* contains a "renamed_from" field, which is ignored
2021-03-01 18:21:27 +01:00
rtyr
b6cd41d670
Merge pull request #6116 from pmjdebruijn/creality_6
...
Creality Various
2021-03-01 10:55:41 +01:00
rtyr
13b3e813cf
CR5PRO and CR200B thumbnails
2021-03-01 10:50:41 +01:00
Pascal de Bruijn
34202f71e5
creality.ini: move Ender-3 specific extruder_clearance
...
replace general extruder_clearance with higher values so there's
a lot of clearance leeway until we get exact figures for each
printer model.
related: f9b4bbb016
2021-02-28 17:10:25 +01:00
Pascal de Bruijn
90f58fe90a
creality.ini: CR-200B bed_shape and max_print_height
2021-02-28 17:06:24 +01:00
Pascal de Bruijn
e5b7b20be1
creality.ini: CR-5 Pro more accurate bed
2021-02-28 16:57:35 +01:00
Pascal de Bruijn
19ba6f1492
creality.ini: add CR-200B
2021-02-28 16:53:33 +01:00
Pascal de Bruijn
2d762ec320
creality.ini: add CR-5 Pro
...
retract_length = 3
to prevent clogging since this printer is suspected to have
an all metal hot end, as Creality claims print temperatures
up to 300C
2021-02-28 16:38:05 +01:00
Pascal de Bruijn
249670f82c
creality.ini: fix CR-10 Mini bed_shape
2021-02-28 16:36:58 +01:00
Pascal de Bruijn
bc9c968f05
creality.ini disable single_extruder_multi_material_priming
2021-02-27 18:16:47 +01:00
Pascal de Bruijn
c142af74c5
creality.ini: add printer_notes to Ender3V2
2021-02-27 17:53:20 +01:00
Pascal de Bruijn
19c50c7e69
creality.ini: consolidate more properties to *common*
2021-02-27 17:51:57 +01:00
Pascal de Bruijn
6391d4243f
creality.ini: tweak fill_density and skirt_distance
2021-02-27 17:40:44 +01:00
rtyr
0593a41350
Updated vendor name.
2021-02-25 23:00:32 +01:00
Pascal de Bruijn
9b7621dc7e
creality.ini: double digit layer height (cosmetic)
2021-02-23 20:06:55 +01:00
Pascal de Bruijn
f9b4bbb016
creality.ini: more accurate extruder_clearance for Ender-3
...
radius = 47mm = 45mm carriage (including bltouch upgrade)
+ 2mm safety margin
height = 34mm = 30mm nozzle
+ 2mm bltouch probe pin
+ 2mm safety margin
2021-02-23 19:53:30 +01:00
Pascal de Bruijn
b06030f2bc
creality.ini: allow slightly steeper unsupported angles
2021-02-23 19:23:35 +01:00
rtyr
49f7d11940
INAT bundle
...
https://github.com/prusa3d/PrusaSlicer/pull/6112
2021-02-23 10:26:21 +01:00
rtyr
1dce483bc9
Thumbnails for CR8 and Ender4
2021-02-22 12:52:26 +01:00
rtyr
5506465f27
Creality index update
2021-02-22 09:24:52 +01:00
rtyr
39ba24abd7
Updated version
2021-02-22 09:23:58 +01:00
rtyr
4eb66ae124
Merge pull request #6079 from pmjdebruijn/creality_5
...
Creality Various
2021-02-22 09:23:14 +01:00
Pascal de Bruijn
5f1129acea
creality.ini: descendingz gcode comment improvement
2021-02-19 18:54:47 +01:00
Pascal de Bruijn
5842842770
creality.ini: descendingz is more descriptive
2021-02-19 18:05:47 +01:00
rtyr
6561ffec86
1.2.4 sync
2021-02-19 13:11:47 +01:00
Pascal de Bruijn
5c287cd998
creality.ini: relocate max_print_height close to bed_shape
2021-02-18 19:37:55 +01:00
Pascal de Bruijn
66a30b8102
creality.ini: add CR-8
2021-02-18 19:28:09 +01:00
Pascal de Bruijn
0cfa04fe2f
creality.ini: add Ender-4
2021-02-18 19:20:54 +01:00
Pascal de Bruijn
138501338c
creality.ini: add safe zone for Ender-3 V2
2021-02-18 19:06:03 +01:00
rtyr
fbd8d57adc
Modified possibly problematic start/end g-code Mega
2021-02-18 17:19:41 +01:00
rtyr
6da9f5aff9
Ender-6 thumbnail
2021-02-18 16:50:28 +01:00
rtyr
669e8d573c
Merge pull request #6069 from pmjdebruijn/creality_start_gcode_2
...
creality.ini: improve start_gcode comments
2021-02-17 22:52:11 +01:00
Pascal de Bruijn
991bab61bb
creality.ini: support CR-6 SE pause print
2021-02-17 19:49:15 +01:00
Pascal de Bruijn
e3ea71a0d6
creality.ini: improve start_gcode comments
2021-02-17 18:39:59 +01:00
Pascal de Bruijn
e7ffcec29e
creality.ini: add Ender-6
2021-02-15 13:53:55 +01:00
rtyr
66976bb954
Merge pull request #6021 from pmjdebruijn/creality_max
...
creality.ini: add Ender-3 Max
2021-02-12 14:04:34 +01:00
rtyr
5a5d9d0e53
Thumbnails for new Creality models.
...
https://github.com/prusa3d/PrusaSlicer/pull/5968
https://github.com/prusa3d/PrusaSlicer/pull/6021
2021-02-12 14:03:38 +01:00
rtyr
b0e5ab8d47
Updated CR6 thumbnail.
2021-02-12 12:31:05 +01:00
rtyr
f8b660e08e
Initial Artillery bundle
...
Artillery Sidewinder X1
Artillery Genius
https://github.com/prusa3d/PrusaSlicer-settings/pull/122
2021-02-12 11:45:36 +01:00
rtyr
6e994b2882
Artillery resources
2021-02-12 11:43:19 +01:00
Pascal de Bruijn
104c560575
creality.ini: Move Ender-3 V2 into proper order
2021-02-11 17:31:51 +01:00
Pascal de Bruijn
5dbd503d3d
creality.ini: add Ender-3 Max
2021-02-11 17:24:01 +01:00
rtyr
0b4720338f
Merge pull request #5968 from pmjdebruijn/creality_max
...
Creality CR-6 Max / CR-10 Max / etc
2021-02-09 09:19:40 +01:00
rtyr
310531d2db
Updated Kossel bed textures.
2021-02-08 23:43:21 +01:00
rtyr
1d0484a25d
Anycubic 0.0.7 Updated start g-code
2021-02-08 23:41:13 +01:00
Pascal de Bruijn
d135bd86de
creality.ini: Add Extrudr GreenTEC Pro filament
2021-02-08 17:07:41 +01:00
Pascal de Bruijn
7f925e700b
creality.ini: add experimental support for CR-X (Pro)
2021-02-07 16:45:14 +01:00
Pascal de Bruijn
723e0b6e9d
creality.ini: Add safety zone for CR-10 S Pro
2021-02-07 15:43:48 +01:00
Pascal de Bruijn
8feef8bcf0
creality.ini: add vendor associated color for Das Filament
2021-02-07 15:03:09 +01:00
Pascal de Bruijn
8ff82cc1d2
creality.ini: increase CR-6/CR-10 Max retract_length slightly
2021-02-07 13:48:28 +01:00
Pascal de Bruijn
622664ef8e
creality.ini: Add CR-10 Max
2021-02-05 17:28:44 +01:00
Pascal de Bruijn
6373c7f1cb
creality.ini: Add CR-6 Max and add safety border to CR-10 S4
2021-02-04 18:41:17 +01:00
Pascal de Bruijn
a4a465b9a6
creality.ini: Creality CR-6 SE improvements
2021-02-03 17:34:06 +01:00
rtyr
e52efe48b0
Creality CR-6 SE thumbnail
2021-02-02 11:40:58 +01:00
rtyr
c8e5277f0c
Updated print temperature for Das Filament PLA
...
https://github.com/prusa3d/PrusaSlicer/issues/5693
2021-02-01 21:22:30 +01:00
rtyr
a2a0a86138
Creality 0.0.13
2021-01-29 10:44:35 +01:00
rtyr
31e7a60494
Creality - bumped up version to 0.0.13
2021-01-29 10:43:34 +01:00
rtyr
3009b314c8
Merge pull request #5908 from pmjdebruijn/creality_4
...
creality.ini various improvements
2021-01-28 23:48:36 +01:00
rtyr
0168fc612a
Updated bed_texture for Anycubic Kossel
2021-01-28 23:38:45 +01:00
rtyr
7b3a06fd05
Updated Anycubic Kossel bed models.
2021-01-28 23:35:38 +01:00
rtyr
c9ebc18a10
Added Anycubic Kossel texture
...
from https://github.com/prusa3d/PrusaSlicer/pull/5747
2021-01-28 23:34:43 +01:00
Pascal de Bruijn
1f9fe92720
creality.ini: hide CR-6 SE until next release
2021-01-28 18:14:19 +01:00
Pascal de Bruijn
ba87613454
creality.ini: update start_gcode/end_gcode comments
2021-01-28 18:13:45 +01:00
Pascal de Bruijn
ba6a40bcce
creality.ini: add CR-6 SE
2021-01-27 17:42:32 +01:00
Pascal de Bruijn
f2a624007b
creality.ini: enable more filaments by default
2021-01-27 17:34:38 +01:00
Pascal de Bruijn
5fa4880eac
creality.ini: add comments
2021-01-27 17:15:43 +01:00
Pascal de Bruijn
ed04eb1f20
creality.ini: remove superfluous printer_variant from ENDER3V2
2021-01-27 17:04:13 +01:00
Pascal de Bruijn
93da13b0a3
creality.ini: set slowabl to 120C to match fastabl
2021-01-25 21:06:50 +01:00
Pascal de Bruijn
c27ab57c18
creality.ini: use 120C nozzle temp for bed leveling for CR-6 SE
...
it seems the CR-6 SE uses 120C for it's strain gauge based bed leveling,
so we'll make this our general default, so we can limit the number of
start_gcode variants we'll need to maintain.
this also introduces a 10 second dwell before any homing happens, to
allow the nozzle to warm up, so that any filament stuck on the nozzle
becomes somewhat pliable.
2021-01-25 20:32:22 +01:00
Pascal de Bruijn
5f9cf7cfae
creality.ini: Move print head further up for low prints
...
With low prints, moving the print head up 70mm can still be too low
to be able to remove a print conveniently, so make sure the print head
is at least 60% up at the end of a print.
2021-01-25 17:22:13 +01:00
Pascal de Bruijn
78354ee991
creality.ini: reduce prime line in start_gcode
...
reduce the prime line sufficiently so the Ender-2 no longer requires
a seperate start_gcode
the extrusion pressure is scaled proportionately, and reduced slightly,
as previously some nozzle ooze could happen between the prime line and
the skirt loops due to excessive pressure buildup
2021-01-24 13:09:22 +01:00
Pascal de Bruijn
6bcdf0999c
creality.ini: universal end_gcode improvement
...
Replace hardcoded print presentation coordinate with print_bed_max[1],
where we move the print bed ~3/4 of the bed size across the y axis
at the end of the print.
2021-01-24 12:40:52 +01:00
Pascal de Bruijn
4ede5c3959
creality.ini: Ender3 V2 naming consistency
2021-01-23 19:31:23 +01:00
Pascal de Bruijn
6955e8ec08
creality.ini: raise Das Filament PLA bed temp
...
At 50C prints with sharper corners can be prone te warping if the
first layer height isn't quite optimal, and given that most Creality
printers don't have ABL, it often isn't.
So to optimize chances of getting good non-warped prints, we keep
all PLA bed temps at 60C for Creality printers.
2021-01-23 19:12:01 +01:00
Pascal de Bruijn
231cd758c1
creality.ini: improve nonabl start_gcode
2021-01-23 19:09:29 +01:00
rtyr
23ddb33237
1.2.2 Added Prusament PVB. Added 0.8mm nozzle profiles.
2021-01-08 10:57:41 +01:00
rtyr
250ef23fd5
Updated 0.0.12 description
2021-01-08 09:44:09 +01:00
rtyr
ecb85b2166
Added Ender 3-V2.
...
Based on https://github.com/prusa3d/PrusaSlicer/pull/5702 .
2021-01-08 09:42:01 +01:00
rtyr
e8ab281cd0
TriLAB 0.0.6 - Added material TPU 93A
2021-01-06 20:35:37 +01:00
rtyr
615356b69c
Ender3V2 thumbnail
2021-01-06 13:36:44 +01:00
rtyr
ef5df08358
Initial FLSun bundle
...
https://github.com/prusa3d/PrusaSlicer/pull/5582
2021-01-03 20:59:36 +01:00
rtyr
7edb79ed11
1.2.1 Updated firmware version for MK2.5 family printers
2020-12-28 15:03:05 +01:00
rtyr
cd990cf5e0
Updated machine limits for Ender 5 and Ender 5 Pro
2020-12-28 14:36:57 +01:00
rtyr
ea327c2d8c
Creality 0.0.10
...
Parameter consistency improvements. Enabled conservative elephant foot compensation.
2020-12-21 15:21:26 +01:00
rtyr
f7d5032d0e
Bumped up version to 0.0.10
2020-12-21 15:20:29 +01:00
Pascal de Bruijn
71cb5d1469
Creality.ini: default to Generic PLA, and move defaults to common printer section
2020-12-18 18:55:29 +01:00
Pascal de Bruijn
33c36e6777
creality.ini: enable conservative elefant_foot_compensation
...
given the diversity of printers and bed types and a typical lack of
auto bed levelling, it will be impossible to get a good fit
for everyone by default.
A very conservative 0.1 for elefant_foot_compensation is unlikely
to cause overcompensation.
And I'd prefer to undercompensate as opposed to overcompensate
as a default.
2020-12-17 13:05:40 +01:00
Pascal de Bruijn
1cf97b9c93
Creality.ini: improve parameter consistency
2020-12-17 13:04:39 +01:00
rtyr
3f11877c8f
Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
2020-12-16 16:18:31 +01:00
rtyr
e9ee88c397
Fixed end g-code for Ender 5
2020-12-13 09:25:59 +01:00
rtyr
fe4f1b15c6
Anycubic 0.0.6
2020-12-08 22:16:13 +01:00
rtyr
beabe2fe7e
Anycubic Kossel. Updated end g-code, before layer change g-code and output filename format.
2020-12-08 22:12:15 +01:00
Nicolas North [norðurljósahviða]
fa8a72b2a3
Reduced max print height for Anycubic Predator to 445mm
2020-12-08 11:12:42 +01:00
rtyr
b0485e3949
TriLAB 0.0.5 Removed obsolete host keys.
2020-12-05 11:29:16 +01:00
rtyr
72a64c200b
Anycubic 0.0.5 Updated end g-code.
2020-12-05 11:23:07 +01:00
rtyr
02a63e8de2
LulzBot 0.0.2 Removed obsolete host keys
2020-12-05 11:19:53 +01:00
rtyr
4cffd490cc
BIBO 0.0.3 Removed obsolete host keys
2020-12-05 11:14:27 +01:00
rtyr
92f7bdcf92
0.0.8 min_slic3r_version changed to 2.3.0-beta2
2020-12-05 10:21:13 +01:00
rtyr
7cb7c5fd55
Changed layer_z to max_layer_z in end g-code.
2020-12-05 10:18:49 +01:00
rtyr
6716416add
Removed redundant line
2020-12-05 09:58:51 +01:00
rtyr
b95f9897b8
Updated end g-code. Added full_fan_speed_layer values.
2020-12-05 09:55:07 +01:00
rtyr
ee088e219e
Creality 0.0.8
2020-12-05 09:53:05 +01:00
rtyr
c4d97d3d9b
bumped up to 0.0.8
2020-12-05 09:51:38 +01:00
Pascal de Bruijn
e3a0a8878a
creality.ini: add Extrudr PLA NX2 spool weight
2020-11-29 19:05:02 +01:00
Pascal de Bruijn
0f03b74261
creality.ini: add 3DJAKE ecoPLA spool weight
2020-11-29 12:47:48 +01:00
Pascal de Bruijn
f86dab9f36
creality.ini: slight end_gcode improvements
...
gcode order made more similar to prusa mini
2020-11-29 12:42:08 +01:00
rtyr
6d27b0f5d0
1.2.0-beta0
2020-11-28 10:35:59 +01:00
rtyr
4b2f9562ab
TriLAB - Added PLA, PETG profiles for 0.8 nozzle, update print materials
...
https://github.com/prusa3d/PrusaSlicer-settings/pull/110
2020-11-24 09:53:50 +01:00
rtyr
ee20331ead
1.2.0-alpha0 added filament spool weight
2020-11-21 15:42:38 +01:00
rtyr
9023f092ad
Creality 0.0.7 - updated start g-code
2020-11-21 10:24:54 +01:00
rtyr
a2e763d4ca
Bumped up creality bundle version to 0.0.7
2020-11-21 10:22:57 +01:00
Pascal de Bruijn
32345b9e75
creality.ini: make start_gcode robust for absolute_e
2020-11-18 18:40:20 +01:00
Nicolas North [norðurljósahviða]
342f0738c2
revert version bump to 0.0.4 and remove accel settings for Predator
2020-11-15 00:51:17 +01:00
Nicolas North [norðurljósahviða]
28c2277902
Equalize all accelerations to avoid filling gcode with M204 commands
2020-11-14 17:16:46 +01:00
Nicolas North [norðurljósahviða]
2558a98636
fix spurious custom setting in Anycubic Predator profile
2020-11-14 12:27:20 +01:00
rtyr
cd2b502c38
Updated Anycubic thumbnails.
2020-11-13 13:08:09 +01:00
rtyr
2df97edcf5
Updated LulzBot thumbnails.
2020-11-12 19:20:23 +01:00
rtyr
62a29237fc
Added filament profiles, adjusted temperatures, updated start g-code for some models.
2020-11-12 18:55:42 +01:00
rtyr
0c78573f5c
Version changed to 0.0.6
2020-11-12 18:52:48 +01:00
rtyr
868ffa21d5
Updated BIBO2 thumbnail. Removed "BETA" label.
2020-11-12 18:47:30 +01:00
Pascal de Bruijn
b9da42eb67
creality.ini: raise remaining PLA bed temperatures to 60
...
While doing a bunch of bed adhesion tests, both on Creality's
FakeTak as well as on smooth PEI, while 50 degrees seems to work
with most lower temp PLAs at least, but less so with the higher
temp PLAs, it universally requires the first layer height to be
dialed in much better to not get any warping.
With the bed temperature set to 60 degrees, there is much more
leeway in the first layer height while still getting unwarped
prints.
Particularly given that most Creality printers don't have ABL as
standard, I think it might sense from a robustness perspective
to have all PLAs default to at least 60 degrees, as to increase
chances prints will come out just fine.
https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
2020-11-12 18:26:45 +01:00
rtyr
aa32f48c9c
Updated creality thumbnails. Removed "BETA" label.
2020-11-10 17:53:49 +01:00
rtyr
cf339c5f8d
Updated thumbnails. Removed "BETA" sign.
2020-11-10 17:26:42 +01:00
rtyr
21a7a606d2
Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
...
https://github.com/prusa3d/PrusaSlicer-settings/pull/108
2020-11-10 16:02:34 +01:00
rtyr
1799d263b3
Merge pull request #5118 from trilab3d/master-trilab
...
Added thumbnails for new TriLAB printers
2020-11-10 15:59:49 +01:00
Matej Supik
0259c96287
Added thumbnails for new trilab printers - https://github.com/prusa3d/PrusaSlicer-settings/pull/108
2020-11-10 12:02:50 +01:00
Pascal de Bruijn
077cc1e5ff
creality.ini: Add Devil Design PLA Galaxy (Glitter)
...
This glitter PLA requires a significantly higher hot end temp to
get a similar amount of flow as the same brands counterpart
regular PLA filament
It even needs a slightly higher bed temp to prevent warping on
sharp corners
2020-11-09 19:27:02 +01:00
Pascal de Bruijn
9f2d8299b1
creality.ini: disable pause_print_gcode ( #4980 )
2020-11-09 18:52:01 +01:00
rtyr
b0252ba607
Merge pull request #5114 from pmjdebruijn/creality_head_bed_first
...
creality.ini: introduce slow abl variant start_gcode
2020-11-09 15:38:43 +01:00
Pascal de Bruijn
90f1cb3414
creality.ini: introduce slow abl variant start_gcode
...
printers with a large bed are probably more prone to heat induced
bed warping, there we'll split up our abl start_gcode in fast
and slow variants, where printers with a smaller bed like
the Ender-3 will still use the fast variant, printers with
a large bed like the CR-10 will use the slow variant which
heats up the bed before starting the abl procedure.
2020-11-09 13:48:01 +01:00
rtyr
006630299b
Fixed predator output filaname format, infill overlap
2020-11-09 11:44:00 +01:00
rtyr
f33f55646c
Bumped up version to 0.0.4
2020-11-09 11:43:02 +01:00
rtyr
71593a487f
Merge pull request #5104 from Tillverka3d/master
...
Fix predator output filaname format, infill overlap, and retraction length
2020-11-09 11:39:39 +01:00
Pascal de Bruijn
72bcd29bc7
creality.ini: add filament_colour per vendor
...
this essentially associates filament_colour with a vendor
the colour codes were taking from each of the vendors websites
2020-11-08 19:36:36 +01:00
Pascal de Bruijn
3b63b0eca0
creality.ini: lower Creality PLA temp
...
Based on test-dog.gcode on the SD card included with the Enter 3 Pro
M190 S50.000000
M109 S200.000000
I also did a temperature tower test with the sample filament spool included
with my Ender 3 Pro, which I still hadn't opened.
And at all temps 190-215C I've seen fairly poor bridging, with 190C being the
least worst. I still have to test, but it'll likely perform well at 185C.
The semitranslucent white PLA included with my Ender 3 Pro, probably has a
matting agent in it, which explains why it's very flowy, and very similar
in performance to another Matte PLA filament I have, which also exhibits
poor bridging at even moderate temperatures.
For the time being, let's stick with Creality's own sample settings.
2020-11-08 19:17:24 +01:00
Pascal de Bruijn
1025e01a9d
creality.ini: slightly raise temp for Generic PLA
2020-11-08 19:14:17 +01:00
Pascal de Bruijn
39c5a5cc12
creality.ini: Add AzureFilm PLA filament
...
Based on temperature tower
2020-11-08 19:13:12 +01:00
Nicolas North [norðurljósahviða]
f843e1034d
Revert retract_lenght for Predator until further testing
2020-11-08 17:07:42 +01:00
Nicolas North [norðurljósahviða]
3a0b0913e3
Fix retraction lenght for predator
2020-11-07 23:50:59 +01:00
Nicolas North [norðurljósahviða]
c518ec8abd
Fix predator output filaname format and infill overlap
2020-11-07 22:20:01 +01:00
rtyr
e01b3f4759
Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles.
2020-11-06 10:55:50 +01:00
rtyr
98b7ce405c
Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles.
...
https://github.com/prusa3d/PrusaSlicer/pull/5092
2020-11-06 10:54:34 +01:00
rtyr
3da92257d2
Anycubic 0.0.3
2020-11-05 10:42:08 +01:00
rtyr
94c54d0538
Bumped up version to 0.0.3
2020-11-05 10:40:35 +01:00
Nicolas North [norðurljósahviða]
69fd5c1074
fix infill_overlap, start_gcode, end_gcode for anycubic predator
2020-11-05 03:24:51 +01:00
rtyr
729304c129
Creality - Prusament PLA temp adjust
2020-11-03 22:15:39 +01:00
Pascal de Bruijn
893475d7ed
creality.ini: fix first_layer_bed_temperature for Generic PLA
2020-11-03 19:39:45 +01:00
Pascal de Bruijn
f119bc9872
creality.ini: optimize Generic PLA
...
with some exceptions most regular PLAs seem to print well
around 200C, which is most likely due to the limited
effectiveness of the part cooling fan design on most
Creality printers
2020-11-03 19:32:00 +01:00
Pascal de Bruijn
eb0534b7b5
creality.ini: add 123-3D Jupiter PLA filament
...
print temperature based on a temperature tower test
190C seems to produce some inconsistencies
200C seems like the best tradeoff
210C has noticably worse bridging/overhangs
Offical pricing from the vendor is 19.50EUR per 1KG roll
2020-11-03 19:28:01 +01:00
Pascal de Bruijn
590ea85de5
creality.ini: add 3DJAKE ecoPLA filament
...
print temperature based on a temperature tower test
going lower than 200C doesn't seem to give many benefits
going higher than 200C seems to produce slightly worse
overhangs, which becomes particularly noticeable at 210C
Offical pricing from the vendor is 21.99EUR per 1KG roll
2020-11-03 17:45:44 +01:00
Pascal de Bruijn
f4203e6509
creality.ini: add Velleman PLA filament
...
print temperature based on a temperature tower test
going lower than 200C doesn't seem to give many benefits
going higher than 200C seems to produce slightly worse
overhangs, which becomes particularly noticeable at 215C
There is no reference pricing from the Belgian vendor,
however 20,99 per 0.75KG roll seems common
2020-11-03 17:38:01 +01:00
rtyr
51bd0b733e
Added 0.15mm print profile.
2020-11-03 08:35:46 +01:00
rtyr
47b854e0c0
New filament profiles.
...
https://github.com/prusa3d/PrusaSlicer/pull/5061
2020-11-03 08:27:31 +01:00
rtyr
36527cbaf2
Added Ender 5 thumbnail
2020-11-02 21:13:21 +01:00
Pascal de Bruijn
e6f6c59dae
creality.ini: fix Ender-5 end_gcode comments
2020-11-02 17:17:28 +01:00
Pascal de Bruijn
9ca5de8bdf
creality.ini: end_gcode improvement
2020-11-02 17:12:30 +01:00
Pascal de Bruijn
7b10e467cd
creality.ini: add Ender-5
2020-11-02 17:11:26 +01:00
