Alessandro Ranellucci
|
a3bd1b5302
|
New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925
|
2014-05-22 19:34:49 +02:00 |
|
Alessandro Ranellucci
|
8ca352eb62
|
Separate speed option for support material interface. #2009
|
2014-05-21 15:21:20 +02:00 |
|
Alessandro Ranellucci
|
85b0a4376a
|
Use last extruder's settings when adding new ones. #1997
|
2014-05-20 23:37:17 +02:00 |
|
Alessandro Ranellucci
|
0b0ec7be37
|
Fixed regression causing bad loading of multi-extruder values in GUI. #1984
|
2014-04-28 22:31:29 +02:00 |
|
Alessandro Ranellucci
|
ce9cf4d964
|
Don't put supports under bridges and potential bridges
|
2014-04-26 17:19:50 +02:00 |
|
Alessandro Ranellucci
|
c3bb8a69db
|
Bugfix: crash when extending an array option by 2+ positions. #1908
|
2014-04-19 16:38:28 +02:00 |
|
Alessandro Ranellucci
|
33ade1328f
|
Fix regression causing profile names to be listed in random order. #1864
|
2014-04-06 22:45:40 +02:00 |
|
Alessandro Ranellucci
|
c7a96a3113
|
Merge pull request #1881 from sapir/master
Disable some calls to on_presets_changed to speed up switching profiles
|
2014-04-06 12:52:05 +02:00 |
|
Alessandro Ranellucci
|
a6dd68a2a6
|
Bugfix: crash when setting number of extruders. #1876
|
2014-04-05 09:54:43 +02:00 |
|
Y. Sapir
|
576d02a20d
|
Make set_dirty ignore changes that don't do anything.
|
2014-03-30 00:23:35 +03:00 |
|
Y. Sapir
|
09d7d9b034
|
Remove call to on_presets_changed from Tab Page's on_change.
(set_dirty is called which handles it anyway.)
|
2014-03-30 00:21:57 +03:00 |
|
Alessandro Ranellucci
|
071097d3f1
|
Fix extruder assignment and tests
|
2014-03-27 00:01:33 +01:00 |
|
Alessandro Ranellucci
|
0ff33f47f1
|
Fix the extruder override logic. All role-based extruder options now default to 0, meaning no override is defined and the default (inherited) extruder is used. The default extruder option does not use the shortcut logic anymore (it was thus moved to be a CLI-specific logic)
|
2014-03-26 00:08:15 +01:00 |
|
Alessandro Ranellucci
|
2e6213fea6
|
Prevent crash when changing number of extruders
|
2014-03-25 19:21:44 +01:00 |
|
Alessandro Ranellucci
|
fed8783e30
|
New commands for exporting/importing full config bundles. Useful for printer vendors. #1365
|
2014-03-25 14:04:01 +01:00 |
|
Alessandro Ranellucci
|
432a87e73d
|
New option for forcing the generation of interface shells. #1847
|
2014-03-25 01:11:28 +01:00 |
|
Alessandro Ranellucci
|
67f3e9962b
|
Prevent user from saving a preset with the "- default -" name. #1717
|
2014-03-23 21:40:45 +01:00 |
|
Alessandro Ranellucci
|
9fb62e671f
|
Adapt GUI to new XS Config
|
2013-12-22 01:27:09 +01:00 |
|
Alessandro Ranellucci
|
beb7939e22
|
Rename standby_temperature to ooze_prevention. #1523
|
2013-11-15 16:01:15 +01:00 |
|
Alessandro Ranellucci
|
33e160c1ed
|
Automatically save presets after running the wizard
|
2013-11-11 21:45:58 +01:00 |
|
Alessandro Ranellucci
|
bcc061176c
|
New option to use G10/G11 for firmware-controlled retraction. #1494
|
2013-10-27 16:59:18 +01:00 |
|
Alessandro Ranellucci
|
991bc8ae3d
|
Partial work for implementing a standby temperature option
|
2013-09-18 17:45:02 +02:00 |
|
Alessandro Ranellucci
|
7d09f17810
|
Reflect max_fan_speed in cooling textual description. #1439
|
2013-09-16 10:09:39 +02:00 |
|
Alessandro Ranellucci
|
99816e07a6
|
New --first-layer-acceleration option
|
2013-08-09 14:30:43 +02:00 |
|
Alessandro Ranellucci
|
913f401280
|
Merge new-support2
|
2013-07-29 20:50:26 +02:00 |
|
Alessandro Ranellucci
|
f455ecb7da
|
Rename adjust_overhang_flow to overhangs
|
2013-07-06 11:35:40 +02:00 |
|
Alessandro Ranellucci
|
606d856af8
|
Lower case option group titles
|
2013-07-06 02:46:09 +02:00 |
|
Alessandro Ranellucci
|
b857d79604
|
Move spiral_vase to vertical shells section
|
2013-07-05 22:23:45 +02:00 |
|
Alessandro Ranellucci
|
f8ae8d3e8d
|
New option to disable overhang flow
|
2013-07-05 22:12:58 +02:00 |
|
Alessandro Ranellucci
|
282c751b0f
|
New option for disabling thin wall detection
|
2013-07-05 22:10:43 +02:00 |
|
Alessandro Ranellucci
|
0a7e0ffecf
|
New options: start_perimeters_at_concave_points start_perimeters_at_non_overhang
|
2013-07-05 22:06:58 +02:00 |
|
Alessandro Ranellucci
|
362232ada4
|
New Quality section in GUI
|
2013-07-05 21:57:56 +02:00 |
|
Alessandro Ranellucci
|
f0440bede4
|
Move infill_every_layers infill_only_where_needed into their own "Reducing Printing Time" section
|
2013-07-05 21:55:01 +02:00 |
|
Alessandro Ranellucci
|
ccdb29ddc9
|
New --spiral-vase option to continously raise Z when printing single-walled vases. #997
|
2013-05-13 20:15:45 +02:00 |
|
Alessandro Ranellucci
|
7c89476602
|
Move fan_always_on in the Enable options group. #1166
|
2013-05-13 18:33:44 +02:00 |
|
Alessandro Ranellucci
|
bac5093de4
|
Alwyas apply disable_fan_first_layers, even if cooling is disabled, since fan_always_on is applied in that case as well. Update descriptive text and have it appear in case of disabled auto cooling. #1166
|
2013-05-10 15:09:27 +02:00 |
|
Alessandro Ranellucci
|
0d6ff22e19
|
Merge branch 'wipe'
|
2013-03-31 11:36:04 +02:00 |
|
Alessandro Ranellucci
|
7b7c9f6330
|
Launch even if config is corrupted. #1067
|
2013-03-30 00:30:21 +01:00 |
|
Alessandro Ranellucci
|
ec5f0635f7
|
Add wipe in GUI
|
2013-03-18 21:20:32 +01:00 |
|
Alessandro Ranellucci
|
35bd5a3423
|
New --solid-infill-extrusion-width option
|
2013-03-17 00:02:31 +01:00 |
|
Alessandro Ranellucci
|
cf5adca928
|
New --resolution option to simplify input models
|
2013-03-16 19:58:34 +01:00 |
|
Alessandro Ranellucci
|
db2e76a0df
|
New option to change perimeter order. #534
|
2013-03-16 18:56:49 +01:00 |
|
Alessandro Ranellucci
|
2942485a94
|
New option to make infill before perimeters. #1039
|
2013-03-10 18:15:44 +01:00 |
|
Alessandro Ranellucci
|
e9c7460c11
|
New --bridge-acceleration option
|
2013-03-09 20:31:09 +01:00 |
|
Alessandro Ranellucci
|
460e169c67
|
New option to disable retraction on layer change
|
2013-03-09 20:05:43 +01:00 |
|
Alessandro Ranellucci
|
9247b3e9f4
|
New --no-plater and --gui-mode options. #604
|
2013-03-09 16:43:09 +01:00 |
|
Alessandro Ranellucci
|
af50272b3b
|
Refactor simple mode definitions to dedicated SimpleTab classes
|
2013-03-09 16:27:18 +01:00 |
|
Alessandro Ranellucci
|
5477d66902
|
Advertise the expert mode in simple mode
|
2013-03-09 14:55:07 +01:00 |
|
Alessandro Ranellucci
|
46f35e39f6
|
Some more tweaks
|
2013-03-08 23:34:57 +01:00 |
|
Alessandro Ranellucci
|
0748e088a0
|
Reorder options in simple mode
|
2013-03-08 23:07:14 +01:00 |
|