Alessandro Ranellucci
7b09a56cf7
New spacing math. Speed optimizations
2012-07-03 18:05:31 +02:00
Henrik Brix Andersen
3fa58cf85b
Add a friendly index
2012-07-03 17:21:32 +02:00
Henrik Brix Andersen
92ec70c860
Use wxDefaultPosition and wxDefaultSize to improve readability
2012-07-03 01:20:30 +02:00
Henrik Brix Andersen
e8a20eed6a
Use wxDefaultSize instead of [-1, -1]
2012-07-03 00:42:06 +02:00
Mark Hindess
35ecd65e77
Implement nearest point index and split at index to avoid search for point.
2012-07-02 20:26:56 +01:00
Mark Hindess
35fda7de23
Revert "split_at_first_point needn't call deserialize as split_at calls it."
...
This reverts commit a6d8d6473c
2012-07-02 16:57:29 +01:00
Alessandro Ranellucci
c1c8997b4e
Bugfix: wrong spacing was calculated
2012-07-02 17:09:09 +02:00
Mark Hindess
60ca76ff05
Oops. Somehow I missed this when doing interactive add.
2012-07-01 22:35:52 +00:00
Mark Hindess
ca78bbd88a
Use Slic3r::Geometry polyline_lines rather than duplicate implementation.
...
If it is good enough for polygons, it should be good enough for polylines.
2012-07-01 23:15:17 +01:00
Mark Hindess
b11778a85f
polygon_lines returns array of Slic3r::Line objects so bless is redundant.
2012-07-01 23:14:04 +01:00
Mark Hindess
a6d8d6473c
split_at_first_point needn't call deserialize as split_at calls it.
2012-07-01 22:52:13 +01:00
Henrik Brix Andersen
cd7661aa2a
Use proper ellipsis for all GUI '...' strings
2012-07-01 23:29:56 +02:00
Henrik Brix Andersen
a4219ba352
Sort imported events alphabetically
2012-07-01 19:35:48 +02:00
Henrik Brix Andersen
7746040af5
Clean up Wx imports
2012-07-01 19:24:06 +02:00
Alessandro Ranellucci
641c2a241b
Write Slic3r version in config files
2012-07-01 18:53:01 +02:00
Alessandro Ranellucci
c4b9a6cf61
Bugfix: flow wasn't adjusted for perimeters when a custom perimeters extrusion width was applied
2012-07-01 18:13:48 +02:00
Henrik Brix Andersen
a72b914eb0
Add lib/Slic3r/GUI/ConfigWizard.pm to MANIFEST
2012-07-01 00:24:55 +02:00
Mark Hindess
07f2dab5f6
Fix perimeters_* options to be singular to be consistent.
2012-06-30 23:18:15 +01:00
Henrik Brix Andersen
bfe7108cea
Provide instructions for loading an existing configuration instead of using the wizard
2012-07-01 00:17:48 +02:00
Henrik Brix Andersen
8f0aab3520
Restore old configuration if configuration wizrd is cancelled
2012-07-01 00:10:48 +02:00
Henrik Brix Andersen
bb193c659c
Start configuration wizard from sane default settings
2012-06-30 23:56:11 +02:00
Henrik Brix Andersen
e656c30d4f
Clean up imports
2012-06-30 23:30:52 +02:00
Henrik Brix Andersen
757da9d39d
Clean up imports
2012-06-30 23:28:07 +02:00
Henrik Brix Andersen
d90e82faa3
Check for unsaved changes before running configuration wizard
2012-06-30 23:00:05 +02:00
Henrik Brix Andersen
df658eb636
Rename SkeinPanel::on_close() to make it more generice
2012-06-30 22:57:30 +02:00
Henrik Brix Andersen
a0f8078ee1
Warn on dirty default presets as well
2012-06-30 22:34:13 +02:00
Alessandro Ranellucci
cbb111ee64
Fix for incomplete commit causing thin gaps to throw an error
2012-06-30 17:23:55 +02:00
Alessandro Ranellucci
b9008a99f9
Fill the gaps while doing normal infill to avoid extra travel
2012-06-30 16:33:01 +02:00
Alessandro Ranellucci
5eb1982081
Bugfix: brim was extruded multiple times when sequential printing was enabled
2012-06-30 16:14:45 +02:00
Alessandro Ranellucci
a7668e0933
Revert "Reduce memory usage during gcode output by discarding processed layers."
...
This reverts commit 4d1551c305
2012-06-30 16:12:06 +02:00
Alessandro Ranellucci
d5c9b74377
Allow scaling factor to be at least 2540 to allow the conversion of inch models
2012-06-29 20:46:51 +02:00
Mark Hindess
b4a21bea40
Fix for #499 .
2012-06-29 17:02:37 +01:00
Mark Hindess
4d1551c305
Reduce memory usage during gcode output by discarding processed layers.
...
As each layer is processed, it increases in size by a factor of two
or three so by the end the layer list gets quite big. So this removes
the list entry after it's been processed.
2012-06-29 12:33:30 +01:00
Henrik Brix Andersen
d884856b2e
Add information about the Silk icon set.
2012-06-28 23:47:31 +02:00
Henrik Brix Andersen
4f179a5197
Explicitly set top level window (to ensure the wizard is not assumed to be the top level window)
2012-06-28 23:20:10 +02:00
Mark Hindess
2e1649e6b5
Comment out code that builds @vertices_facets data structure.
...
Saves memory and speeds up reading large models.
2012-06-28 19:58:21 +01:00
Alessandro Ranellucci
fb96cdec76
Command line options to assign perimeters and infill to different extruders
2012-06-28 16:48:56 +02:00
Alessandro Ranellucci
80501d5b3c
New option to customize support material extrusion width
2012-06-28 16:33:07 +02:00
Alessandro Ranellucci
f9f2361acb
Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture
2012-06-28 16:22:11 +02:00
Alessandro Ranellucci
dbcfebeb66
Rename support_material_tool to support_material_extruder
2012-06-28 15:14:27 +02:00
Alessandro Ranellucci
3e8bc73fcb
Fix typo in previous commit
2012-06-28 14:49:20 +02:00
Alessandro Ranellucci
898266fd34
Initial refactoring for supporting multiple extruders. Little speed optimization included
2012-06-28 14:44:54 +02:00
Henrik Brix Andersen
ed9f6e1f1e
Rephrase a few of the wizard instructions
2012-06-27 23:20:29 +02:00
Henrik Brix Andersen
84cfe7afc7
Automatically show configuration wizard on first run
2012-06-27 22:13:57 +02:00
Henrik Brix Andersen
7211561ab3
Change wizard welcome text a bit
2012-06-27 21:51:12 +02:00
Henrik Brix Andersen
145b9076cc
Let the wizard automatically set first_layer_height = nozzle_diameter
2012-06-27 21:03:57 +02:00
Alessandro Ranellucci
92460ba902
Bugfix: the plater didn't remember last input file directory. #485
2012-06-27 20:27:46 +02:00
Henrik Brix Andersen
dbc42f6841
Make it more clear that the wizard uses your current configuration as basis
2012-06-27 19:56:47 +02:00
Alessandro Ranellucci
eea6d84314
Bugfix: infill extrusion width was ignored
2012-06-27 19:55:54 +02:00
Alessandro Ranellucci
47a07a86ee
Bugfix: GUI was unable to update flow settings
2012-06-27 19:49:53 +02:00
