Alessandro Ranellucci
|
caf41f07dd
|
Output required filament length and volume to command line and to the gcode file itself
|
2011-12-20 15:29:15 +01:00 |
|
Alessandro Ranellucci
|
627e1b32e2
|
Add Slic3r version to gcode comment
|
2011-12-20 14:20:39 +01:00 |
|
Alessandro Ranellucci
|
5e850557d4
|
Added note to self about using the skeletonization algorithm to fill small gaps
|
2011-12-19 13:00:42 +01:00 |
|
Alessandro Ranellucci
|
e2a5c2119f
|
Bugfix: some holes were skipped
|
2011-12-19 12:09:14 +01:00 |
|
Alessandro Ranellucci
|
4af295bce3
|
Bugfix: very wrong infill for low density regions. #127
|
2011-12-19 09:55:03 +01:00 |
|
Alessandro Ranellucci
|
65a018f156
|
Move the parsing warning to the end, so that it won't block slicing
|
2011-12-18 13:43:31 +01:00 |
|
Alessandro Ranellucci
|
f20209ce01
|
Add spacing between adjacent surfaces to avoid mini blobs
|
2011-12-18 13:38:45 +01:00 |
|
Alessandro Ranellucci
|
e5619ee543
|
Bugfix: not all paths were closed correctly due to float rounding
|
2011-12-18 11:53:15 +01:00 |
|
Alessandro Ranellucci
|
47bbe18de2
|
Additional check to return a friendly error when binary STL is not valid
|
2011-12-18 10:50:55 +01:00 |
|
Alessandro Ranellucci
|
eca6d0b6d0
|
Adjust flow for solid surfaces when using concentric infill too. #120
|
2011-12-17 20:29:06 +01:00 |
|
Alessandro Ranellucci
|
6a3eeef83b
|
Removed warnings for concentric infill. #121
|
2011-12-17 19:59:31 +01:00 |
|
Alessandro Ranellucci
|
f73febff7a
|
Always start concentric infill from the center. #120
|
2011-12-17 19:56:56 +01:00 |
|
Alessandro Ranellucci
|
d63eabcfa5
|
Clip less from loops to avoid gaps
|
2011-12-17 19:54:35 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|
Alessandro Ranellucci
|
cd0fd80a69
|
Restore better perimeter/infill overlap for solid surfaces
|
2011-12-16 18:37:43 +01:00 |
|
Alessandro Ranellucci
|
8e04d763f4
|
Don't increase flow for overlapping purposes when bridging
|
2011-12-16 10:53:22 +01:00 |
|
Alessandro Ranellucci
|
f5eb4f03e1
|
Skirt can be disabled by either setting skirts to 0 or skirt-height to 0
|
2011-12-16 09:55:13 +01:00 |
|
Alessandro Ranellucci
|
172253cfd7
|
Always use rectilinear infill for internal-solid surfaces
|
2011-12-15 22:05:15 +01:00 |
|
Alessandro Ranellucci
|
8e06a4f6f2
|
Bugfix: fatal error when using concentric infill
|
2011-12-15 21:46:29 +01:00 |
|
Alessandro Ranellucci
|
b422537cc4
|
Bugfix: do not die when no layers are detected at all
|
2011-12-15 20:36:46 +01:00 |
|
Alessandro Ranellucci
|
18cfc15ead
|
Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm)
|
2011-12-15 20:21:34 +01:00 |
|
Alessandro Ranellucci
|
2e013e72e8
|
Bugfix: models located very far from XYZ origin were incorrectly placed on the print area
|
2011-12-15 19:40:32 +01:00 |
|
Alessandro Ranellucci
|
40d06a6e11
|
Erorr in last commit about automatic extrusion width. #112
|
2011-12-15 12:50:02 +01:00 |
|
Alessandro Ranellucci
|
156a1deb0a
|
Limit automatic extrusion width to be <= 1.2 * nozzle_diameter (Triffid's way). #112
|
2011-12-15 09:33:42 +01:00 |
|
Alessandro Ranellucci
|
d346bc02cc
|
Comments are now disabled by default, new --gcode-comments option to enable them
|
2011-12-14 19:49:21 +01:00 |
|
Alessandro Ranellucci
|
3d213069a6
|
Bugfix: 100% overlap between perimeter and infill. #118
|
2011-12-14 19:40:18 +01:00 |
|
Alessandro Ranellucci
|
b9d01a32e5
|
Merge branch 'new-math'
|
2011-12-14 16:12:05 +01:00 |
|
Alessandro Ranellucci
|
048f7ca468
|
Adjusted flow width for solid infills was ignored
|
2011-12-14 11:35:19 +01:00 |
|
Alessandro Ranellucci
|
4bee1a12b8
|
Take overlap into account for external dimensions
|
2011-12-14 11:21:43 +01:00 |
|
Alessandro Ranellucci
|
ca5dfc05e7
|
Accept STL files with spaces at the end of vertex lines. #119
|
2011-12-14 10:29:08 +01:00 |
|
Alessandro Ranellucci
|
569e737ae1
|
Only connect infill edges when not doing solid surfaces
|
2011-12-13 17:36:03 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
869cb48c1a
|
Merge branch 'master' of github.com:alexrj/Slic3r
|
2011-12-12 17:35:18 +01:00 |
|
Alessandro Ranellucci
|
3c2b2cfef2
|
Bugfix: duplicate options did not work correctly for copies > 2. #113
|
2011-12-12 17:32:45 +01:00 |
|
Richard Goodwin
|
557afcc4b1
|
Added scale to settings output
|
2011-12-11 15:32:47 -06:00 |
|
Alessandro Ranellucci
|
0ebd8eb8a9
|
Don't die when config has unknown options. #108
|
2011-12-10 10:39:07 +01:00 |
|
Alessandro Ranellucci
|
c957c27367
|
Remember last opened directory. #106
|
2011-12-09 14:07:50 +01:00 |
|
Alessandro Ranellucci
|
b92ba67272
|
Workaround for a WxWidgets bug that clips the overlap_ratio label on Mac
|
2011-12-08 22:06:53 +01:00 |
|
Alessandro Ranellucci
|
0a74e068a3
|
Merge branch 'infill-overlap'
|
2011-12-08 10:53:24 +01:00 |
|
Alessandro Ranellucci
|
d9a70ea80d
|
Customizable overlap ratio (it defaults to 0.15 now)
|
2011-12-08 10:53:07 +01:00 |
|
Alessandro Ranellucci
|
d813aea59a
|
Don't slow down retractions on bottom layer. #101
|
2011-12-08 10:28:23 +01:00 |
|
Alessandro Ranellucci
|
1f64a01ed4
|
Remove empty layers from bottom. They could be caused by little contact with the print bed, resulting in the need of thin walls. While thin walls will be supported one day, it's still not optimal to have so little contact on bottom layer(s), so we remove such layers. #96
|
2011-12-08 10:25:19 +01:00 |
|
Alessandro Ranellucci
|
99c1facec6
|
Bugfix: division by zero when nothing in a single layer could be parsed. #100
|
2011-12-07 20:18:12 +01:00 |
|
Alessandro Ranellucci
|
525855dc7d
|
Bugfix: fatal error when combining infills. #96
|
2011-12-07 20:15:08 +01:00 |
|
Richard Goodwin
|
3ced3ee91f
|
Fixed bolding and font issues on Windows
|
2011-12-06 15:36:42 -06:00 |
|
Alessandro Ranellucci
|
313f77ee59
|
Bugfix: removed error when filling small regions
|
2011-12-05 19:54:19 +01:00 |
|
Alessandro Ranellucci
|
2ba513bdb2
|
Bugfix: after recent changes, objects had slight dimension errors. #56
|
2011-12-05 18:48:48 +01:00 |
|
Alessandro Ranellucci
|
3d0cde2fce
|
Fixed regression. The repair algorithm was not working after recent changes. Releasing 0.5.5b. #16 #28
|
2011-12-05 13:01:02 +01:00 |
|
Alessandro Ranellucci
|
b8a5d5a208
|
Bugfix: fatal error on many models. Releasing 0.5.5a. #92 #93
|
2011-12-05 12:15:52 +01:00 |
|
Alessandro Ranellucci
|
53bc9c7421
|
Customizable speed for small perimeters. #60
|
2011-12-04 20:50:03 +01:00 |
|
Alessandro Ranellucci
|
ea254588f7
|
More tolerance for config files
|
2011-12-04 20:41:17 +01:00 |
|
Alessandro Ranellucci
|
28a89c70c9
|
New bridge flow rate multiplier option. #85
|
2011-12-04 20:29:21 +01:00 |
|
Alessandro Ranellucci
|
3ac9dd513b
|
Add first layer height ratio option to the GUI
|
2011-12-04 19:17:42 +01:00 |
|
Alessandro Ranellucci
|
b79ae44e3d
|
Recent changes made Slic3r less tolerant with dirty STL files. Now we are able again to slice Prusa parts. #16
|
2011-12-04 19:10:43 +01:00 |
|
Alessandro Ranellucci
|
eb64cc4965
|
More fixes for bridges. #58
|
2011-12-04 18:37:37 +01:00 |
|
Alessandro Ranellucci
|
d056535bd8
|
Further corrections to the bridge angle detection algorithm. #58
|
2011-12-04 17:19:03 +01:00 |
|
Alessandro Ranellucci
|
0aff5fab24
|
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
|
2011-12-04 16:24:46 +01:00 |
|
Alessandro Ranellucci
|
4fe340cc56
|
Many fixes to the bridge direction detection algorithm and other things. #58
|
2011-12-03 18:31:31 +01:00 |
|
Alessandro Ranellucci
|
792960aae1
|
Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58
|
2011-12-02 23:35:39 +01:00 |
|
Alessandro Ranellucci
|
5375f5fef4
|
Mark important settings in bold
|
2011-12-02 17:02:36 +01:00 |
|
Alessandro Ranellucci
|
52c9897eda
|
New --extrusion-axis option; removed --no-extrusion
|
2011-12-01 22:34:21 +01:00 |
|
Alessandro Ranellucci
|
830965fc0b
|
Note used settings in exported gcode. #52
|
2011-12-01 22:20:48 +01:00 |
|
Alessandro Ranellucci
|
aab85a4e27
|
Bugfix: unable to read back config file if start or end gcode was empty. #84
|
2011-12-01 22:06:07 +01:00 |
|
Alessandro Ranellucci
|
e99c9f9e5f
|
Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77
|
2011-12-01 22:04:23 +01:00 |
|
Alessandro Ranellucci
|
2a02d26ca5
|
Fixed regression: fill density = 0 was preventing extra solid layers. #75
|
2011-12-01 21:15:02 +01:00 |
|
Alessandro Ranellucci
|
f7a9c9be63
|
Bugfix: sometimes holes were detected as contours
|
2011-12-01 20:57:38 +01:00 |
|
Alessandro Ranellucci
|
133f3a0495
|
Bugfix: Clipper error occurred under certain circumstances
|
2011-12-01 19:40:45 +01:00 |
|
Alessandro Ranellucci
|
b03afc7f1c
|
Bugfix: some bridges were not detected correctly. #57
|
2011-11-30 20:32:28 +01:00 |
|
Alessandro Ranellucci
|
52270d6b95
|
Bugfix: extrusion width ratio gave wrong flow rate under certain circumstances. #80
|
2011-11-30 18:18:17 +01:00 |
|
Alessandro Ranellucci
|
71c359bb29
|
Cleaning recent changes
|
2011-11-30 17:48:00 +01:00 |
|
Alessandro Ranellucci
|
42383dec84
|
Warn about models with overlapping or intersecting facets but try to repair wrong layers. #16
|
2011-11-30 16:28:09 +01:00 |
|
Alessandro Ranellucci
|
d51a37a0ae
|
Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16
|
2011-11-30 16:07:31 +01:00 |
|
Michael Moon
|
729905d342
|
allow solid fill layers to be zero
|
2011-11-30 12:51:34 +11:00 |
|
Alessandro Ranellucci
|
2970e31540
|
Bugfix: some bridges being very close could lead to overlapping infill
|
2011-11-29 11:36:52 +01:00 |
|
Alessandro Ranellucci
|
d168ecbb4e
|
Bugfix: fill density = 0 was preventing generation of extra solid layers. #75
|
2011-11-29 10:15:50 +01:00 |
|
Alessandro Ranellucci
|
248ed8589a
|
Bugfix: error when concentric infill. #73
|
2011-11-28 22:52:35 +01:00 |
|
Alessandro Ranellucci
|
92e86a2259
|
Bugfix: plate was lifted even when retracting for Z change
|
2011-11-28 19:59:39 +01:00 |
|
Alessandro Ranellucci
|
3ad9ed74ae
|
New --solid-infill-feed-rate option. #68
|
2011-11-28 19:11:26 +01:00 |
|
Alessandro Ranellucci
|
975387d953
|
New --bridge-feed-rate option. #68
|
2011-11-28 18:37:53 +01:00 |
|
Alessandro Ranellucci
|
4cdd0f6fd0
|
Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero.
|
2011-11-27 10:12:44 +01:00 |
|
Alessandro Ranellucci
|
22551b64de
|
Bugfix: a recent change broke all options having a zero value
|
2011-11-26 22:43:12 +01:00 |
|
Alessandro Ranellucci
|
7a5af293a8
|
Mark slow infill patterns as slow. #20
|
2011-11-26 22:41:23 +01:00 |
|
Alessandro Ranellucci
|
8ce2c23e52
|
Bugfix: hard errors when extrusion width was left empty.
|
2011-11-26 20:51:04 +01:00 |
|
Alessandro Ranellucci
|
8e7d00bb34
|
Avoid unnecessary retractions during infill. #29
|
2011-11-26 17:01:00 +01:00 |
|
Alessandro Ranellucci
|
72d7e1a5de
|
Don't update progress bar with wxWidgets 2.9.0 and 2.9.1
|
2011-11-26 16:52:10 +01:00 |
|
Alessandro Ranellucci
|
bed502af3c
|
Make the progress bar determinate and output status description. #31
|
2011-11-26 16:19:30 +01:00 |
|
Alessandro Ranellucci
|
951778439a
|
Bugfix: recent changes broke the "infill every layers" option which didn't alternate infill direction correctly. #70
|
2011-11-26 15:21:15 +01:00 |
|
Alessandro Ranellucci
|
afd8e0a1bd
|
Bugfix: setting temperature to zero didn't remove it from output
|
2011-11-26 15:11:11 +01:00 |
|
Alessandro Ranellucci
|
0ab1fd4c19
|
concentric - new superfast infill pattern
|
2011-11-26 10:38:45 +01:00 |
|
Alessandro Ranellucci
|
f3b689d4e0
|
Bugfix: infill every 'n' layers was broken after recent changes
|
2011-11-25 18:16:31 +01:00 |
|
Alessandro Ranellucci
|
25c85aada5
|
Renamed "filament packing density" to "extrusion multiplier". Same values. #4
|
2011-11-25 11:15:20 +01:00 |
|
Alessandro Ranellucci
|
3c0ea0b57f
|
New --extrusion-width-ratio option. #8
|
2011-11-25 11:10:35 +01:00 |
|
Alessandro Ranellucci
|
47d347e1b2
|
Revert "Disable retraction when moving over infill space. #29"
This reverts commit d6ed9c6f34.
|
2011-11-24 12:53:09 +01:00 |
|
Alessandro Ranellucci
|
8598b66b0a
|
Large refactoring. Cleaner logic, smaller memory footprint.
|
2011-11-23 12:29:27 +01:00 |
|
Alessandro Ranellucci
|
13ef24b5eb
|
Fixes, improvements and refactoring for bridges and solid surfaces.
|
2011-11-23 09:49:39 +01:00 |
|
Alessandro Ranellucci
|
d13a0e2503
|
Bugfix: no top surfaces when they were too close to bridges
|
2011-11-22 21:45:05 +01:00 |
|
Alessandro Ranellucci
|
048410ac52
|
Bugfix: some infill lines extruded outside objects when using 45° infill angle. #65
|
2011-11-22 20:35:05 +01:00 |
|
Alessandro Ranellucci
|
84d9f5fd9d
|
Bugfix: some regions near bridges were left blank. #58
|
2011-11-21 21:05:00 +01:00 |
|
Alessandro Ranellucci
|
36e1ea0caa
|
Make sure bridges don't overlap. #58
|
2011-11-21 16:35:10 +01:00 |
|
Alessandro Ranellucci
|
74786185e4
|
Don't die on non-manifold models, after having tried the slower detection algorithm too. #16
|
2011-11-21 16:09:13 +01:00 |
|