Alessandro Ranellucci
|
5bfe19a8b9
|
Huge speed Boost (pun intended). Also fixes a problem where infill was escaping perimeters sometimes (#305).
|
2012-04-09 11:04:32 +02:00 |
|
Alessandro Ranellucci
|
965a4e1bfd
|
Make sure all concentric fill loops are extruded ccw. #298
|
2012-04-03 14:11:12 +02:00 |
|
Alessandro Ranellucci
|
64892c2203
|
Bugfix: fatal error on some models. #255
|
2012-03-10 23:49:24 +01:00 |
|
Alessandro Ranellucci
|
4a72c77150
|
Maximize fill/perimeter contact for line infill pattern
|
2012-03-04 11:45:45 +01:00 |
|
Alessandro Ranellucci
|
be9886eac3
|
Bugfix: fill escapes perimeters. #139
|
2012-03-04 11:26:11 +01:00 |
|
Alessandro Ranellucci
|
be0e1a6e0b
|
Bugfix: fill escapes perimeters. However, we keep it disabled. #139
|
2012-02-25 22:41:53 +01:00 |
|
Alessandro Ranellucci
|
c98f6734c7
|
Code optimization
|
2012-02-25 22:18:07 +01:00 |
|
Alessandro Ranellucci
|
7b67fae686
|
Support material
|
2012-02-19 12:03:36 +01:00 |
|
Alessandro Ranellucci
|
4ade11b26e
|
Some minor fixes related to polyline refactoring
|
2012-01-27 14:29:06 +01:00 |
|
Alessandro Ranellucci
|
00c6287488
|
Bugfix: fill escapes perimeters. #139
|
2012-01-21 17:11:14 +01:00 |
|
Alessandro Ranellucci
|
63972a3a35
|
Some more overlap
|
2012-01-21 16:35:23 +01:00 |
|
Alessandro Ranellucci
|
f1b1454b36
|
Loops were not closing well
|
2012-01-21 11:51:31 +01:00 |
|
Alessandro Ranellucci
|
0e23f20df1
|
Poor overlap between perimeters and infill
|
2012-01-21 11:48:03 +01:00 |
|
Alessandro Ranellucci
|
a3a9cf5749
|
Yet other things not changed when refactored. #163
|
2012-01-12 10:48:18 +01:00 |
|
Alessandro Ranellucci
|
b605381132
|
Bugfix: more errors in infills after refactoring. #162
|
2012-01-11 23:19:56 +01:00 |
|
Alessandro Ranellucci
|
8ed91a8ec4
|
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
|
2011-12-30 19:59:51 +01:00 |
|
Alessandro Ranellucci
|
ab0300bb70
|
Bugfix for recent solid infill adjustment math, to take float math into account
|
2011-12-22 18:55:18 +01:00 |
|
Alessandro Ranellucci
|
4af295bce3
|
Bugfix: very wrong infill for low density regions. #127
|
2011-12-19 09:55:03 +01:00 |
|
Alessandro Ranellucci
|
e5619ee543
|
Bugfix: not all paths were closed correctly due to float rounding
|
2011-12-18 11:53:15 +01:00 |
|
Alessandro Ranellucci
|
eca6d0b6d0
|
Adjust flow for solid surfaces when using concentric infill too. #120
|
2011-12-17 20:29:06 +01:00 |
|
Alessandro Ranellucci
|
6a3eeef83b
|
Removed warnings for concentric infill. #121
|
2011-12-17 19:59:31 +01:00 |
|
Alessandro Ranellucci
|
f73febff7a
|
Always start concentric infill from the center. #120
|
2011-12-17 19:56:56 +01:00 |
|
Alessandro Ranellucci
|
d63eabcfa5
|
Clip less from loops to avoid gaps
|
2011-12-17 19:54:35 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|
Alessandro Ranellucci
|
cd0fd80a69
|
Restore better perimeter/infill overlap for solid surfaces
|
2011-12-16 18:37:43 +01:00 |
|
Alessandro Ranellucci
|
8e06a4f6f2
|
Bugfix: fatal error when using concentric infill
|
2011-12-15 21:46:29 +01:00 |
|
Alessandro Ranellucci
|
18cfc15ead
|
Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm)
|
2011-12-15 20:21:34 +01:00 |
|
Alessandro Ranellucci
|
569e737ae1
|
Only connect infill edges when not doing solid surfaces
|
2011-12-13 17:36:03 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
d9a70ea80d
|
Customizable overlap ratio (it defaults to 0.15 now)
|
2011-12-08 10:53:07 +01:00 |
|
Alessandro Ranellucci
|
313f77ee59
|
Bugfix: removed error when filling small regions
|
2011-12-05 19:54:19 +01:00 |
|
Alessandro Ranellucci
|
0aff5fab24
|
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
|
2011-12-04 16:24:46 +01:00 |
|
Alessandro Ranellucci
|
248ed8589a
|
Bugfix: error when concentric infill. #73
|
2011-11-28 22:52:35 +01:00 |
|
Alessandro Ranellucci
|
975387d953
|
New --bridge-feed-rate option. #68
|
2011-11-28 18:37:53 +01:00 |
|
Alessandro Ranellucci
|
0ab1fd4c19
|
concentric - new superfast infill pattern
|
2011-11-26 10:38:45 +01:00 |
|
Alessandro Ranellucci
|
13ef24b5eb
|
Fixes, improvements and refactoring for bridges and solid surfaces.
|
2011-11-23 09:49:39 +01:00 |
|
Alessandro Ranellucci
|
048410ac52
|
Bugfix: some infill lines extruded outside objects when using 45° infill angle. #65
|
2011-11-22 20:35:05 +01:00 |
|
Alessandro Ranellucci
|
a1c766cc52
|
New bridging logic, more robust. #58
|
2011-11-19 16:44:24 +01:00 |
|
Alessandro Ranellucci
|
12b06b0ab0
|
Speed boost for new infill patterns. #20
|
2011-11-14 10:54:04 +01:00 |
|
Alessandro Ranellucci
|
86f3e4fcd2
|
Implemented a new "line" fill pattern. #20
|
2011-11-14 10:31:07 +01:00 |
|
Alessandro Ranellucci
|
a2b4f9f671
|
Use nozzle diameter as flow width when bridging
|
2011-11-13 18:21:25 +01:00 |
|
Alessandro Ranellucci
|
038caddcda
|
New fill types (hilbertcurve, archimedeanchords, octagramspiral) and ability to use different patterns for solid layers. #20
|
2011-11-13 18:14:02 +01:00 |
|
Alessandro Ranellucci
|
7f341cfcd3
|
New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill
|
2011-10-18 15:57:53 +02:00 |
|
Alessandro Ranellucci
|
743f2abcf2
|
Detection of optimal infill direction for bridges. Includes many fixes and improvements.
|
2011-10-07 19:07:57 +02:00 |
|
Alessandro Ranellucci
|
5daaf454b1
|
Faster algorithm for rectilinear fill
|
2011-10-06 17:13:42 +02:00 |
|
Alessandro Ranellucci
|
33d7b8c7cf
|
Code refactored to allow for multiple infill types
|
2011-10-06 15:13:09 +02:00 |
|
Alessandro Ranellucci
|
bfd1d0e1dd
|
Got rid of Math::Geometry::Planar
|
2011-10-06 12:39:58 +02:00 |
|
Alessandro Ranellucci
|
5812804d6b
|
Refactored the can_connect() logic (includes a refactoring of the SVG library)
|
2011-10-06 11:55:26 +02:00 |
|
Alessandro Ranellucci
|
ea88cad8e3
|
Don't extrude acute angles
|
2011-10-01 14:26:54 +02:00 |
|
Alessandro Ranellucci
|
25ea8a0204
|
Bugfixes for complex and dirty geometries
|
2011-09-30 15:46:48 +02:00 |
|
Alessandro Ranellucci
|
b0433097d4
|
New option to customize infill angle
|
2011-09-26 15:51:22 +02:00 |
|
Alessandro Ranellucci
|
415d1a5170
|
Optimization of travel paths for fills
|
2011-09-26 10:52:58 +02:00 |
|
Alessandro Ranellucci
|
5fec13353c
|
Use latest Math::Clipper updated to Clipper 4.4.4 to get sharp corners
|
2011-09-25 20:09:30 +02:00 |
|
Alessandro Ranellucci
|
18c7aef1a7
|
Lots of changes and refactoring after testing with hollow objects
|
2011-09-18 19:28:12 +02:00 |
|
Alessandro Ranellucci
|
26b05ab155
|
Replaced Moose with Moo => big performance boost and easier packaging
|
2011-09-06 11:50:43 +02:00 |
|
Alessandro Ranellucci
|
d8b848a67f
|
Implemented retraction and fixed extrusion math
|
2011-09-05 18:52:09 +02:00 |
|
Alessandro Ranellucci
|
5595839b31
|
Command line interface
|
2011-09-05 13:33:09 +02:00 |
|
Alessandro Ranellucci
|
9e111d0a6d
|
Rectilinear fill
|
2011-09-05 12:21:27 +02:00 |
|