This reverts commit 3d3e36ba8d.
The change is too risky just before the PrusaSlicer 2.2.0 final release
and the feature may need a bit of polishing before release.
The wxString saga continues. wxWidgets 3.0 don't have the wxString::FromUTF8(const std::string&) overload, we must use the GUI::from_u8 helper
Also wxWidgets 3.0 don't allow to disable wxString->const char* conversion, so calling show_info(wxWindow*, wxString, const char*) was ambiguous
Several includes moved around
The bug was introduced in 15eedef. lower_bound_by_predicate implementation returns first item that does not satisfy the predicate, not last item that does.
Compensated slices have negative orientation...
Move efc to common params
Fix elefant foot compensation reversed contours
Remove redundant assertions and don't apply absolute correction if zero
if the number of top / bottom solid layers was set to zero while
the top / bottom minimum shell thickess was set nonzero.
With this commit, if the top / bottom solid layers is set to zero,
there are no top / bottom solid layers generated independent from
the minimum top / bottom shell thickness.
Opening saved project removes Print Host settings #3655
Octoprint Settings when Opening a .3MF file #3244
When loading a configuration file (from AMF, 3MF, .ini or .gcode),
and if the host settings ("print_host", "printhost_apikey", "printhost_cafile")
in the configuration file is empty, then the config is considered to be anonymized,
and these anonymized keys are loaded from the referenced "derived from" profile,
if it exists in user's PrusaSlicer configuration directory.
We are aware that this is a patch work and a better long term solution
is to separate physical printer settings from logical printer settings,
but this is a good enough solution for PrusaSlicer 2.2.0 release.
Exceptions thrown by Flow calculation were made explicit classes derived
from std::invalid_argument.
The PresetHints::recommended_thin_wall_thickness() newly catches these
exceptions and it shows the reason of why the hint is invalid.
+ msw_rescale() is overridden for PrinterTab to rescale of all the option Pages and not just a respect to current print technology
+ A Setting of the option.width in PrintConfig is no need anymore
Interior mesh can be empty and TriangleMeshSlicer would fail in that case.
Also, recalculating shared vertices after repair should probably be done, TMS relies on it.
Reverted the time estimate number stored into the G-code from
days/hours/minutes to days/hours/minutes/seconds, because who knows
who is already parsing the file.
(SlicedInfo: Removed secondes from estimated times):
GCodeTimeEstimator::_get_time_dhm() shall round to minutes, old
code rounded down to minutes, new code rounds to 1/2.
which is a regression of an optimization 3e0690b37b
With the optimization disabled, the G-code generator will not be slower
than PrusaSlicer 2.1.1. I am leaving the code there to mark for
further optimization opportunities.
is enabled / disabled.
Spiral Vase forces different kind of slicing than the normal model:
In Spiral Vase mode, holes are closed and only the largest area contour is kept at each layer.
Therefore toggling the Spiral Vase on / off requires complete reslicing.
This commit moves the update to the correct location.
Fixes Connecting / expanding Bottom Layers to Vase Perimeter #253
Fixes Slicing error in vase mode #452
Fixes Slicing Issue (Vase Mode, 0.6mm dmr nozzle) #1887
Fixes Top fill pattern isn't used in spiral vase mode #2533
Fixes Cisar's vase doesn't slice correctly, creates artefacts #3595
When the model is sliced, all the contours are newly oriented
counter-clockwise (even holes), merged and then only the largest area
contour is retained. In perimeter generator, if the largest contour
splits into multiple perimeters, newly only the largest area perimeter
is retained in spiral vase mode. These two changes solve #3595 and similar.
The infill is newly calculated only for the bottom solid layers
if the spiral vase mode is active (removes various unwanted infill
along the vase walls), and the last bottom solid layer is switched
to a top solid pattern (solves #2533).
The thin walls are newly enforced to be disabled in spiral vase mode,
and the "ensure vertical shell wall" is enforced in spiral vase mode
to extend the bottom of the vase to the vase hull (fixes#253).
collisions against already printed objects: Rotation of an object
was not being taken into account.
Fixes#2450 PrusaSlicer 2.0 Sequential printing vs rotate object
Fixes#3585 Always Sequential Printing Error (Regardless of setting, placement or object size)
Fixed some collisions in sequential print just after arrangement by
making the validation using a slightly lower extruder radius value
than the arrangement.
Refactored PrintObject coordinate system so that the PrintObject's
coordinate system is always centered in respect to its ModelObject's
geometries. This refactoring may improve path planning a bit and
it may lower the requirements on bits representing Clipper coordinates
by 1 bit.