Alessandro Ranellucci
|
88a2e5c791
|
Typo seal -> seam :-)
|
2014-05-24 22:10:28 +02:00 |
|
Alessandro Ranellucci
|
a3bd1b5302
|
New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925
|
2014-05-22 19:34:49 +02:00 |
|
Alessandro Ranellucci
|
7041ebdd22
|
Workaround for upstream module bug causing command line option parsing for multi-boolean options like retract-layer-change and wipe
|
2014-04-19 19:14:41 +02:00 |
|
Alessandro Ranellucci
|
fc4ac5ded4
|
Re-enable the threads config option. #1882
|
2014-04-05 10:58:03 +02:00 |
|
Alessandro Ranellucci
|
0ff33f47f1
|
Fix the extruder override logic. All role-based extruder options now default to 0, meaning no override is defined and the default (inherited) extruder is used. The default extruder option does not use the shortcut logic anymore (it was thus moved to be a CLI-specific logic)
|
2014-03-26 00:08:15 +01:00 |
|
Alessandro Ranellucci
|
fed8783e30
|
New commands for exporting/importing full config bundles. Useful for printer vendors. #1365
|
2014-03-25 14:04:01 +01:00 |
|
Alessandro Ranellucci
|
67f3e9962b
|
Prevent user from saving a preset with the "- default -" name. #1717
|
2014-03-23 21:40:45 +01:00 |
|
Alessandro Ranellucci
|
b5b735c988
|
ComboBox for fill density values
|
2014-03-22 17:01:48 +01:00 |
|
Alessandro Ranellucci
|
7421a7bf63
|
Turn fill_density into percentage
|
2014-03-22 16:23:33 +01:00 |
|
Alessandro Ranellucci
|
34f1511e0c
|
Better fix for non-global options not being replaced in filename placeholders. Includes refactoring and a new PlaceholderParser class. Also includes regression tests. #1831
|
2014-03-17 00:39:07 +01:00 |
|
Alessandro Ranellucci
|
4c650a6d80
|
Fix regression about percent extrusion width not being validated. Includes regression test
|
2014-02-13 18:42:49 +01:00 |
|
Alessandro Ranellucci
|
634ccb33ab
|
Fix regression in Config->setenv affecting post-processing scripts. Includes regression test
|
2014-02-09 23:14:32 +01:00 |
|
Alessandro Ranellucci
|
51af10da4f
|
Some fixes to config API
|
2014-01-12 12:35:13 +01:00 |
|
Alessandro Ranellucci
|
e68cbede6e
|
Add scale rotate duplicate_grid to @Ignore and fix @Ignore which was ignored
|
2014-01-11 23:46:20 +01:00 |
|
Alessandro Ranellucci
|
c0a74780cb
|
The ratio_over parameter was missing in the definition of first_layer_extrusion_width
|
2014-01-11 14:48:13 +01:00 |
|
Alessandro Ranellucci
|
9515acf527
|
Put a hard limit on manually configured extrusion widths (10 * the largest nozzle diameter configured) to prevent confusion when a bad value is entered. #1691
Conflicts:
lib/Slic3r/Config.pm
|
2014-01-11 14:32:42 +01:00 |
|
Alessandro Ranellucci
|
81663215c5
|
Adapt plater to the new split config
|
2014-01-02 22:06:58 +01:00 |
|
Alessandro Ranellucci
|
bfa2ee2770
|
Remove scale, rotate, duplicate, duplicate_grid from config (but leave them in CLI)
|
2014-01-02 18:01:21 +01:00 |
|
Alessandro Ranellucci
|
5bf0942f45
|
Satisfy test suite and CLI
|
2014-01-02 17:24:23 +01:00 |
|
Alessandro Ranellucci
|
e2f1040a76
|
More work
|
2014-01-02 10:44:54 +01:00 |
|
Alessandro Ranellucci
|
beb1baa096
|
Incomplete work for refactoring regions and flows
|
2013-12-30 18:28:41 +01:00 |
|
Alessandro Ranellucci
|
f9d38f6655
|
Allow value -1 for skirt_height with the meaning of: as tall as the object. This might fix an overflow on 32-bit systems when ooze_prevention is enabled
|
2013-12-24 15:16:10 +01:00 |
|
Alessandro Ranellucci
|
c5ead0f2a6
|
Fixes to Config and plater; also refactored the arrange() code
|
2013-12-24 00:30:51 +01:00 |
|
Alessandro Ranellucci
|
9fb62e671f
|
Adapt GUI to new XS Config
|
2013-12-22 01:27:09 +01:00 |
|
Alessandro Ranellucci
|
4515d90052
|
Finished porting Config and option definition to XS
|
2013-12-22 00:39:03 +01:00 |
|
Alessandro Ranellucci
|
9836e963a5
|
Incomplete work for adapting the application to the new XS-based Config
|
2013-12-21 21:06:45 +01:00 |
|
Alessandro Ranellucci
|
d4d8045905
|
Put standby_temperature into options cemetery. #1523
|
2013-11-16 12:45:43 +01:00 |
|
Alessandro Ranellucci
|
beb7939e22
|
Rename standby_temperature to ooze_prevention. #1523
|
2013-11-15 16:01:15 +01:00 |
|
Alessandro Ranellucci
|
4f64e557d9
|
Typo
|
2013-10-27 21:38:32 +01:00 |
|
Alessandro Ranellucci
|
31f77748e7
|
Explain in the tooltip how is the threshold angle measured
|
2013-10-27 21:37:26 +01:00 |
|
Alessandro Ranellucci
|
bcc061176c
|
New option to use G10/G11 for firmware-controlled retraction. #1494
|
2013-10-27 16:59:18 +01:00 |
|
Alessandro Ranellucci
|
0b526afb4e
|
Change labels in wizard to avoid confusion
|
2013-09-21 20:25:34 +02:00 |
|
Alessandro Ranellucci
|
991bc8ae3d
|
Partial work for implementing a standby temperature option
|
2013-09-18 17:45:02 +02:00 |
|
Alessandro Ranellucci
|
bbbdae3952
|
Better name for "Detect overhangs"
|
2013-09-17 21:49:13 +02:00 |
|
Alessandro Ranellucci
|
3d6fb1b05c
|
New feature: ability to override specific settings for individual objects in the plater. #344
|
2013-08-25 14:37:50 +02:00 |
|
Alessandro Ranellucci
|
67f5b7ab14
|
Require --default-acceleration when other acceleration settings are used
|
2013-08-09 14:33:20 +02:00 |
|
Alessandro Ranellucci
|
99816e07a6
|
New --first-layer-acceleration option
|
2013-08-09 14:30:43 +02:00 |
|
Alessandro Ranellucci
|
d83b14655a
|
Better tooltip for raft layers
|
2013-07-31 20:02:24 +02:00 |
|
Alessandro Ranellucci
|
913f401280
|
Merge new-support2
|
2013-07-29 20:50:26 +02:00 |
|
Alessandro Ranellucci
|
10a8f479f9
|
Bugfix: lift was not working correctly with multiple extruders and multiple skirt layers. Also, we now ignore all lift settings except the one of the first extruder. Includes regression tests. #1332 #1338
|
2013-07-29 19:43:57 +02:00 |
|
Alessandro Ranellucci
|
debe540018
|
Better name for wipe
|
2013-07-26 16:23:43 +02:00 |
|
Alessandro Ranellucci
|
f455ecb7da
|
Rename adjust_overhang_flow to overhangs
|
2013-07-06 11:35:40 +02:00 |
|
Alessandro Ranellucci
|
f8ae8d3e8d
|
New option to disable overhang flow
|
2013-07-05 22:12:58 +02:00 |
|
Alessandro Ranellucci
|
282c751b0f
|
New option for disabling thin wall detection
|
2013-07-05 22:10:43 +02:00 |
|
Alessandro Ranellucci
|
0a7e0ffecf
|
New options: start_perimeters_at_concave_points start_perimeters_at_non_overhang
|
2013-07-05 22:06:58 +02:00 |
|
Alessandro Ranellucci
|
362232ada4
|
New Quality section in GUI
|
2013-07-05 21:57:56 +02:00 |
|
Alessandro Ranellucci
|
71057b54a9
|
Allow negative values in validation...
|
2013-07-03 10:51:44 +02:00 |
|
Alessandro Ranellucci
|
1b6a9c0c3b
|
Added validation on all settings. #611
|
2013-06-30 15:39:03 +02:00 |
|
Alessandro Ranellucci
|
8ea4ed3b5e
|
Allow to supply custom G-code via command line if file is not found
|
2013-06-23 19:25:02 +02:00 |
|
Alessandro Ranellucci
|
90d8da0e0d
|
Limit fan speed to 100% :-)
|
2013-06-21 16:08:16 +02:00 |
|