with the following refactorings:
1) Removed the "printhost_slug" config from the Printer config
and from all the Printer config related spots.
2) "printhost_slug" renamed to "printhost_port". Slug sounds nasty.
3) Improved error reporting of RepetierHost class.
4) Refactored for the new "Physical Printers"
Following refactorings were done independently of the Repetier pull request:
1) Removed PrintHost static print config.
2) Clean-up after conversion of print host configuration
from Printer config to Physical Printer config.
3) Fixed some issues, where the Printer config was still queried for
host configuration. Vojtech believes that this should not happen
after the host configuration is converted to physical printers.
Vojtech still feels that more refactoring is needed in regard to porting
the host configuration from Printer profile to the new Physical Printer
profile.
https://github.com/prusa3d/PrusaSlicer/issues/1212
WIP: The hints do not rescale when switching the "usage" combo box.
The new g-code time estimator needs to be updated to not read
the machine limits if not enabled.
+ Create controls only on the shown and active tab
+ Line class : deleted unused sizer
+ In GUI_Utils added TaskTimer class for the print a time of some task duration
+ BedShapeDialog:: activated options_groups
+ commented some unused code
- changed width of the "Save dialog"
- SavePresetDialog: added info for Print/Filament user presets incompatible with selected printer_technology
- fixed missed "modified" suffix when options are moved to the another preset
- "move selected options" button is added for dependent presets
* Now we show a list of printers name with selected preset
+ Added a edit_button for the editing of the physical printer fro the Settings Tab
+ Show whole list of the loaded presets with "Print host upload"
- Added possibility to correct delete presets considering with the physical printers
- Smart switching to the printer preset if physical printer was selected
* Create full printer name as a PrinterName + RelatedPresetName
* Added printer model to the PhysicalPrinter.config => Enable to select just between presets with same printer model
* When physical printer is selected and create new preset ask if should we use this preset for selected ph_printer or just to switch for it
- PresetCombpBoxes are extracted to the separate file.
- All preset icons are moved to the PresetComboBox from Preset and PresetBundle
- First "steps" to add physical printers to the printers list on the sidebar.
Fixed OSX specific bugs:
- toolbar flashing for some mainframe sizes (Retina specific)
- size of mainframe when settings layout in slNew mode
Added missed icons to the "white" folder
Search string are synchronized between Plater and Tabs.
List with options and filtered list are in Sidebar.
All options list on tabs and Plater use this data from Sidebar
Note: SearchComboBox.cpp(hpp) was renamed to Search.cpp(hpp)
1. "Revert" buttons on the bar don't work for a "Compatible printers" and a "Compatible prints profiles".
And cause a crash if they are pressed in Print(SLA) Settings.
2. A label of a "Compatible printers" option is always black in Filament(Materials) Settings Tab
and the "show incompatible profiles" option.
It was not able to select the incompatible Print profile, which is
possible now.
(see Cannot select incompatible printer profile #3715)
When the Printer profile derived from the Prusa3D system profile was
active or a system Prusa3D profile was active, and when the Print profile
with the removed "inherits" field was active (or any other profile
derived from the "-- default --" profile was active), then the filament
selector offered just the profiles with the removed "inherits" field
(or any other profile derived from the "-- default--") profile.
This behavior has been now changed, so that in this scenario the Filament selector
will offer the Prusa3D vendor profiles compatible with the active Print
and Printer profile as well as the user profiles.
Slicer was also changed to keep an incompatible preset selected
at its respective tab if its respective "Red flag" is enabled.
For example, if an incompatible Print preset is selected and a Printer
profile is switched to another one which is not compatible with the active
Print preset that was red already, the active Print preset is
not switched if the Print "Red flag" is active. However, if the Print profile
was compatible before the Printer profile is switched and now the Print
profile becomes incompatible, another compatible Print profile is selected.
A likely bug in wxWidgets was worked around when switching a Print preset
on Plater, if the last item in the Print preset was active and incompatible,
and another Print preset was selected by the user. On Windows, an CBN_EDITCHANGE
is sent just after combo box selection change event and the CBN_EDITCHANGE
holds an index of the combo box item, which will be removed by the 1st event,
therefore leading to an assert in wxWidgets on CBN_EDITCHANGE. The workaround
is to disable processing of CBN_EDITCHANGE on Windows for the Plater
preset selection combo boxes.
+ msw_rescale() is overridden for PrinterTab to rescale of all the option Pages and not just a respect to current print technology
+ A Setting of the option.width in PrintConfig is no need anymore
The two new config keys define a minimum vertical shell thickness.
The top shell thickness is calculated as a maximum of sum over
top_solid_layers * layer heights and top_solid_min_thickness,
the bottom shell thickness is calculated as a maximum of sum over
bottom_solid_layers * layer heights and bottom_solid_min_thickness.
The results of the formula above are shown at the Print parameter page
below the two new values to hint the user about the interaction
of the old versus new config values.
top_solid_min_thickness has no meaning if top_solid_layers is zero,
bottom_solid_min_thickness has no meaning if bottom_solid_layers is zero.
