Alessandro Ranellucci
575127151b
New algorithm for overhang detection
2013-05-14 20:19:42 +02:00
Alessandro Ranellucci
632652d924
Unfinished work for displaying bridge paths in section cuts
2013-05-14 19:48:47 +02:00
Alessandro Ranellucci
04d2231901
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
2013-03-30 11:22:12 +01:00
Alessandro Ranellucci
1abd8c9a9e
Remove the 'simplify' handle in ExtrusionPath after the recent refactoring. #1054
2013-03-18 18:03:14 +01:00
Alessandro Ranellucci
537fca47c5
Use solid infill speed for internal bridges; apply slowdown if any; don't use bridge fan settings. #240
2013-03-17 00:42:53 +01:00
Alessandro Ranellucci
33b40eda18
Always fix self-intersecting polygons that Douglas-Peucker might return
2013-03-16 18:42:56 +01:00
Alessandro Ranellucci
dac168eff0
Do each island completely if avoid_crossing_perimeters is enabled. #278
2013-03-10 16:09:03 +01:00
Alessandro Ranellucci
2acda9973e
Don't apply acceleration settings to travel moves
2013-03-09 20:28:03 +01:00
Alessandro Ranellucci
70092a9cf5
Apply only_retract_when_crossing_perimeters to all infills
2013-03-04 23:37:58 +01:00
Alessandro Ranellucci
283809f5c2
No need for a role to identify small perimeters
2012-12-05 10:47:41 +01:00
Alessandro Ranellucci
8ae96a8868
Only apply vibration limit to gaps fill while it's not very mature to work with long segments
2012-11-21 19:27:38 +01:00
Alessandro Ranellucci
c99ff0cfe2
Apply Douglas-Peucker to all paths before generating G-code
2012-11-18 17:38:08 +01:00
Alessandro Ranellucci
cec7bf815c
Get rid of the ExtrusionLoop objects in concentric filler
2012-10-30 15:29:13 +01:00
Alessandro Ranellucci
ccb49a8439
Do a slightly thinner interface layer at the top of support material structures by taking into account the diameter of bridge extrudates (nophead's idea)
2012-10-28 16:59:20 +01:00
Alessandro Ranellucci
f35cdef2aa
Renamed ExtrusionPath->depth_layers to height
2012-10-28 14:22:51 +01:00
Alessandro Ranellucci
68c3a0dd61
Make arcs.t happy. #721
2012-10-22 14:08:27 +02:00
Alessandro Ranellucci
2a51cad0c3
Revert "Patch for --gcode-arcs (kindly submitted by Paul Howes)"
...
This reverts commit f4260ae93d
2012-09-12 15:58:01 +02:00
Alessandro Ranellucci
f4260ae93d
Patch for --gcode-arcs (kindly submitted by Paul Howes)
2012-09-12 15:53:24 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Alessandro Ranellucci
bce2663ed8
Restore thin walls and thin fills after last commit
2012-07-20 15:02:25 +02:00
Alessandro Ranellucci
1697cb24a6
Memory optimization and code cleanup. Don't keep deserialized paths
2012-07-20 14:39:56 +02:00
Alessandro Ranellucci
cbb111ee64
Fix for incomplete commit causing thin gaps to throw an error
2012-06-30 17:23:55 +02:00
Alessandro Ranellucci
96a3234eaa
Different speed for external perimeters. #488
2012-06-27 19:42:16 +02:00
Alessandro Ranellucci
0938c73d08
Revert "Don't reset E when the makerbot flavor is selected"
...
This reverts commit 2e5e5983be
2012-06-24 21:05:21 +02:00
Alessandro Ranellucci
2e5e5983be
Don't reset E when the makerbot flavor is selected
2012-06-24 20:58:12 +02:00
Alessandro Ranellucci
62bd33a766
Fixed regression causing fatal errors. #429
2012-06-09 15:53:14 +02:00
Alessandro Ranellucci
fbfbfac2b6
New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151
2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
4aa85f4571
Fixed arcs.t to work with new serialization mechanism
2012-05-19 23:39:36 +02:00
Alessandro Ranellucci
fa4f2c8b97
New option to randomize starting points across layers
2012-05-19 22:36:29 +02:00
Alessandro Ranellucci
b246480535
Massive reduction of memory usage (down to one third).
2012-05-19 17:57:38 +02:00
Alessandro Ranellucci
882a022e3a
Even more constants, less memory, more speed
2012-05-19 16:04:33 +02:00
Alessandro Ranellucci
aa9563f00b
More constants, less strings => ess memory usage
2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
2a6ad2f3f7
Bugfix: removed warnings. #365
2012-05-13 22:56:40 +02:00
Alessandro Ranellucci
96d5e513b8
Rename $Slic3r::resolution to $Slic3r::scaling_factor
2012-04-16 14:05:38 +02:00
Alessandro Ranellucci
d51ba94e8a
Remove XXX from dependencies
2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
eba7c10018
Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm
2012-02-25 14:46:21 +01:00
Alessandro Ranellucci
7b67fae686
Support material
2012-02-19 12:03:36 +01:00
Alessandro Ranellucci
8ed91a8ec4
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
2011-12-30 19:59:51 +01:00
Alessandro Ranellucci
1c7564e4a4
Thin walls. #24
2011-12-30 17:17:37 +01:00
Alessandro Ranellucci
342823fdf3
Bugfix: fatal error in arc detection code. #133
2011-12-25 13:01:48 +01:00
Alessandro Ranellucci
1e6ecd9eab
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
2011-12-17 19:52:34 +01:00
Alessandro Ranellucci
56691c1dea
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
2011-12-13 17:34:31 +01:00
Alessandro Ranellucci
b8a5d5a208
Bugfix: fatal error on many models. Releasing 0.5.5a. #92 #93
2011-12-05 12:15:52 +01:00
Alessandro Ranellucci
0aff5fab24
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
2011-12-04 16:24:46 +01:00
Alessandro Ranellucci
248ed8589a
Bugfix: error when concentric infill. #73
2011-11-28 22:52:35 +01:00
Alessandro Ranellucci
3ad9ed74ae
New --solid-infill-feed-rate option. #68
2011-11-28 19:11:26 +01:00
Alessandro Ranellucci
975387d953
New --bridge-feed-rate option. #68
2011-11-28 18:37:53 +01:00
Alessandro Ranellucci
c5d5e4d244
Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28
2011-11-12 10:18:20 +01:00
Alessandro Ranellucci
d620b46beb
Bugfix: arcs now work (some glitches in detecting their center, though). #30
2011-11-07 14:12:07 +01:00
Alessandro Ranellucci
6d6533831e
New experimental --gcode-arcs options to generate G2/G3 commands. #23
2011-10-28 14:13:44 +02:00
