bubnikv
f8eb215937
Updated unit tests for triangle mesh slicing, as now
...
the slicing considers the vertical structures to be open intervals
at the bottom end, closed at the top end, so slicing at the bottom
of a mesh produces empty slice.
2018-10-03 13:54:04 +02:00
bubnikv
19977edae2
Removed the "Broken croak" support, which was useful on broken
...
64bit Strawberry perl only. We don't use Strawberry perl anymore,
so this has been removed for clarity.
Added a PerlCallback wrapper to call a Perl subroutine from a C++ code.
2018-05-03 21:45:43 +02:00
bubnikv
61ae78432c
Removed the unsupported "pillars" support pattern.
2018-03-14 20:08:34 +01:00
bubnikv
3bc79e80d5
Fixed configuration & validate C++ ports.
2017-10-27 16:11:06 +02:00
bubnikv
93dce7a2d3
Ported config load / stored to C++, thanks @alexrj
...
Implemented import of config values from the G-code.
2017-06-14 17:51:14 +02:00
bubnikv
ed2ee2f6f3
Merged support_fills with support_interface_fills.
...
When extruding supports, the support is interleaved with interface
if possible (when extruded with the same extruder).
Otherwise the base is extruded first.
2017-04-07 17:37:30 +02:00
bubnikv
6582182e0c
Adapted to the new ClipperUtils.hpp interface by @alexrj
2016-12-13 19:22:23 +01:00
bubnikv
2e53c06159
Finished the SLIC3R_HAS_BROKEN_CROAK magic.
2016-11-08 10:59:43 +01:00
bubnikv
aac968162b
Unit test to verify whether Slic3r would hang when croaking from
...
a C++ exception handler. This is an unfortunate error in some
Strawberry Perl distributions.
2016-11-06 17:42:36 +01:00
bubnikv
95ede7c4b8
Rewrote Fill2.pm to C++, deleted Perl infills for good.
...
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
2016-11-02 10:47:00 +01:00
bubnikv
3d3654707b
Added "Notes" page to the filament configuration.
...
Added "filament_max_volumetric_speed", a cap on the maximum volumetric
extrusion role, filament specific. This is very useful when mixing
rigid filament with a soft filament.
Extended the import / export of multi-string values into configuration
values, including the test cases. Multi-line strings will be enclosed
into quotes, quotes escaped using a C-style escape sequences. Single
word strings could still be stored without quotes.
2016-11-01 13:41:24 +01:00
Alessandro Ranellucci
660b56acb5
Fixed type error
2016-03-26 12:21:54 +01:00
Alessandro Ranellucci
1a286fc906
Fixes and improvements to MotionPlanner, much smarter now
2015-12-21 14:46:35 +01:00
Alessandro Ranellucci
934bd43e35
More refactoring on Config XS bindings
2015-12-16 12:58:06 +01:00
Alessandro Ranellucci
3fac8cd77e
Large refactoring of the Config classes
2015-12-07 19:39:49 +01:00
Alessandro Ranellucci
1bebe6097b
Make test happy
2015-12-02 19:39:16 +01:00
Alessandro Ranellucci
61f0a9e4da
Replace the flip word with mirror. #3060
2015-11-04 23:11:30 +01:00
Alessandro Ranellucci
b4019bb438
Ported more Slic3r::GCode methods to XS
2015-07-01 23:00:52 +02:00
Alessandro Ranellucci
ab858f320d
Updated test
2015-07-01 21:02:36 +02:00
Alessandro Ranellucci
70ec433e67
Faster (but less precise) implementation of simplify_by_visibility(), since it was the bottleneck of avoid_crossing_perimeters. #2777
2015-05-18 19:28:59 +02:00
Alessandro Ranellucci
97211f35e7
More robust medial axis pruning. #2800
2015-05-13 20:50:30 +02:00
Alessandro Ranellucci
d6d7880507
Ported Slic3r::Geometry::arrange() to C++/XS
2015-04-29 19:19:07 +02:00
Alessandro Ranellucci
6cab5668e3
Restore correct ordering of concentric infill loops, preventing them from being reordered during G-code generation
2015-03-09 18:28:07 +01:00
Alessandro Ranellucci
2eca094170
Added failing test case for Clipper regression causing extra points in polyline intersection, thus crash with circular bed shape
2015-02-22 17:03:23 +01:00
Alessandro Ranellucci
edbc11477c
Update to Clipper 6.2.9. Fixes #2639
2015-02-22 15:13:52 +01:00
Alessandro Ranellucci
1180a6d83f
Merge pull request #2508 from strahlex/machinekit-gcode
...
added support Machinekit flavour GCode
2015-02-15 17:00:08 +01:00
Alessandro Ranellucci
8851dc7f23
Added failing test case for upstream Clipper issue 126 (our #2639 )
2015-02-15 16:47:55 +01:00
Alessandro Ranellucci
32b8eb489c
Updated Clipper to 6.2.8. This fixes several minor issues, including infill paths not being trimmed correctly. #2448
2015-02-15 16:10:04 +01:00
Alexander Rössler
d35226b889
added support Machinekit flavour GCode
2015-02-06 18:48:46 +01:00
Alessandro Ranellucci
b1f1893481
Bugfix: tangent horizontal mesh surfaces were not included in slices under rare circumstances, generating almost invalid polygons that confused Clipper and caused skipped layers. Includes regression test
2015-01-28 13:00:38 +01:00
Alessandro Ranellucci
357f10732a
Added test case for a Clipper bug
2015-01-18 01:07:23 +01:00
Alessandro Ranellucci
e749f6040f
New +Line::intersection_infinite() method
2015-01-16 16:25:39 +01:00
Alessandro Ranellucci
8f4cbefd0d
Lots of improvements to MotionPlanner/avoid_crossing_perimeters. Smoother paths and several edge cases now handled better
2015-01-06 20:52:36 +01:00
Alessandro Ranellucci
6776d6bc00
Bugfix: a bug in Polyline::split_at() caused random loss of perimeter segments. #2495
2015-01-05 15:51:57 +01:00
Alessandro Ranellucci
d8be67c28b
Bugfix: Douglas-Peucker used perpendicular distance instead of shortest distance, thus clipping more than it should. #2474
2015-01-03 15:03:53 +01:00
Alessandro Ranellucci
91bc4d8157
Bugfix: a typo caused wrong loop splitting, thus wrong ordering of perimeters having bridging parts. Includes regression test. #2258
2014-12-24 00:11:29 +01:00
Alessandro Ranellucci
9264db7ecd
Removed useless thing added in e79aa2e81c
2014-12-17 00:52:01 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
360dee862b
Keep model objects aligned to Z = 0 in plater
2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
b69caff93c
Ported LayerRegion::make_slices() to XS
2014-11-09 16:24:07 +01:00
Alessandro Ranellucci
a4eef93950
Fixed minor regression
2014-11-04 21:07:18 +01:00
Alessandro Ranellucci
01133fd0be
Fix tests after recent output change for ConfigOptionPoint values
2014-10-28 23:37:20 +01:00
Alessandro Ranellucci
73b3c06361
Ported more things to XS
2014-09-21 10:51:36 +02:00
Alessandro Ranellucci
534b8c3f12
Fixed minor harmless error in a couple tests
2014-08-08 11:07:51 +02:00
Alessandro Ranellucci
d9f6b0933b
Use istringstream for deserializing config options in order to use the correct locale. #2187
2014-08-04 11:34:53 +02:00
Alessandro Ranellucci
3ff613d166
Merge branch 'acp-voronoi'
...
Conflicts:
xs/xsp/my.map
2014-07-26 22:38:35 +02:00
Alessandro Ranellucci
d9dc2fda00
Fixed regression causing variable layer heights to be ignored. #2136
...
Conflicts:
xs/xsp/my.map
2014-07-01 19:49:15 +02:00
Alessandro Ranellucci
928335f186
Removed print_center option (but left --print-center from CLI)
2014-06-16 23:58:45 +02:00
Alessandro Ranellucci
4fe2128fc4
Initial work for custom bed shape
2014-06-16 01:49:49 +02:00
Alessandro Ranellucci
3f6360ee8f
Finish porting Print classes to XS
2014-06-10 16:01:57 +02:00
