Alessandro Ranellucci
|
b1d6420ff4
|
Avoid test failures due to floating point values comparison
|
2011-12-22 12:19:24 +01:00 |
|
Alessandro Ranellucci
|
1cc28844a5
|
Merge pull request #131 from sparr/master
this fixes a bug with arc lengths as discussed on IRC, including two unit tests
|
2011-12-22 03:16:16 -08:00 |
|
Clarence Risher
|
a81e8c4afc
|
correct length calculation for clockwise arcs
|
2011-12-22 06:10:54 -05:00 |
|
Alessandro Ranellucci
|
55045e0437
|
Limit skirt height to the print height. #128
|
2011-12-22 11:57:26 +01:00 |
|
Alessandro Ranellucci
|
28b851508e
|
Extended arcs unit test to check whether it works with both cw and ccw arcs
|
2011-12-22 11:38:04 +01:00 |
|
Alessandro Ranellucci
|
98a8c64ed7
|
Extended (and fixed) unit testing to track down (and fix) an issue caused by floating point math that reversed some holes into contours when they should actually be ignored
|
2011-12-22 11:24:46 +01:00 |
|
Alessandro Ranellucci
|
fbea5dae8f
|
Bugfix: consider holes when searching for supporting surfaces
|
2011-12-20 22:37:59 +01:00 |
|
Alessandro Ranellucci
|
fcb7f63c87
|
Added --ignore-nonexistent-config to allow integration with Pronterface even if config file doesn't exist
|
2011-12-20 17:44:19 +01:00 |
|
Alessandro Ranellucci
|
caf41f07dd
|
Output required filament length and volume to command line and to the gcode file itself
|
2011-12-20 15:29:15 +01:00 |
|
Alessandro Ranellucci
|
627e1b32e2
|
Add Slic3r version to gcode comment
|
2011-12-20 14:20:39 +01:00 |
|
Alessandro Ranellucci
|
5e850557d4
|
Added note to self about using the skeletonization algorithm to fill small gaps
|
2011-12-19 13:00:42 +01:00 |
|
Alessandro Ranellucci
|
e2a5c2119f
|
Bugfix: some holes were skipped
|
2011-12-19 12:09:14 +01:00 |
|
Alessandro Ranellucci
|
4af295bce3
|
Bugfix: very wrong infill for low density regions. #127
|
2011-12-19 09:55:03 +01:00 |
|
Alessandro Ranellucci
|
65a018f156
|
Move the parsing warning to the end, so that it won't block slicing
|
2011-12-18 13:43:31 +01:00 |
|
Alessandro Ranellucci
|
f20209ce01
|
Add spacing between adjacent surfaces to avoid mini blobs
|
2011-12-18 13:38:45 +01:00 |
|
Alessandro Ranellucci
|
e5619ee543
|
Bugfix: not all paths were closed correctly due to float rounding
|
2011-12-18 11:53:15 +01:00 |
|
Alessandro Ranellucci
|
47bbe18de2
|
Additional check to return a friendly error when binary STL is not valid
|
2011-12-18 10:50:55 +01:00 |
|
Alessandro Ranellucci
|
eca6d0b6d0
|
Adjust flow for solid surfaces when using concentric infill too. #120
|
2011-12-17 20:29:06 +01:00 |
|
Alessandro Ranellucci
|
6a3eeef83b
|
Removed warnings for concentric infill. #121
|
2011-12-17 19:59:31 +01:00 |
|
Alessandro Ranellucci
|
f73febff7a
|
Always start concentric infill from the center. #120
|
2011-12-17 19:56:56 +01:00 |
|
Alessandro Ranellucci
|
d63eabcfa5
|
Clip less from loops to avoid gaps
|
2011-12-17 19:54:35 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|
Alessandro Ranellucci
|
cd0fd80a69
|
Restore better perimeter/infill overlap for solid surfaces
|
2011-12-16 18:37:43 +01:00 |
|
Alessandro Ranellucci
|
8e04d763f4
|
Don't increase flow for overlapping purposes when bridging
|
2011-12-16 10:53:22 +01:00 |
|
Alessandro Ranellucci
|
f5eb4f03e1
|
Skirt can be disabled by either setting skirts to 0 or skirt-height to 0
|
2011-12-16 09:55:13 +01:00 |
|
Alessandro Ranellucci
|
172253cfd7
|
Always use rectilinear infill for internal-solid surfaces
|
2011-12-15 22:05:15 +01:00 |
|
Alessandro Ranellucci
|
8e06a4f6f2
|
Bugfix: fatal error when using concentric infill
|
2011-12-15 21:46:29 +01:00 |
|
Alessandro Ranellucci
|
e6bce05d9b
|
Releasing 0.5.6
|
2011-12-15 20:39:14 +01:00 |
|
Alessandro Ranellucci
|
b422537cc4
|
Bugfix: do not die when no layers are detected at all
|
2011-12-15 20:36:46 +01:00 |
|
Alessandro Ranellucci
|
18cfc15ead
|
Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm)
|
2011-12-15 20:21:34 +01:00 |
|
Alessandro Ranellucci
|
2e013e72e8
|
Bugfix: models located very far from XYZ origin were incorrectly placed on the print area
|
2011-12-15 19:40:32 +01:00 |
|
Alessandro Ranellucci
|
40d06a6e11
|
Erorr in last commit about automatic extrusion width. #112
|
2011-12-15 12:50:02 +01:00 |
|
Alessandro Ranellucci
|
156a1deb0a
|
Limit automatic extrusion width to be <= 1.2 * nozzle_diameter (Triffid's way). #112
|
2011-12-15 09:33:42 +01:00 |
|
Alessandro Ranellucci
|
d346bc02cc
|
Comments are now disabled by default, new --gcode-comments option to enable them
|
2011-12-14 19:49:21 +01:00 |
|
Alessandro Ranellucci
|
3d213069a6
|
Bugfix: 100% overlap between perimeter and infill. #118
|
2011-12-14 19:40:18 +01:00 |
|
Alessandro Ranellucci
|
b9d01a32e5
|
Merge branch 'new-math'
|
2011-12-14 16:12:05 +01:00 |
|
Alessandro Ranellucci
|
2475de0554
|
Fix Pronterface instructions
|
2011-12-14 16:10:36 +01:00 |
|
Alessandro Ranellucci
|
048f7ca468
|
Adjusted flow width for solid infills was ignored
|
2011-12-14 11:35:19 +01:00 |
|
Alessandro Ranellucci
|
4bee1a12b8
|
Take overlap into account for external dimensions
|
2011-12-14 11:21:43 +01:00 |
|
Alessandro Ranellucci
|
efbcbc5bbf
|
Changed default retraction speed to 30mm/s. #115
|
2011-12-14 10:33:22 +01:00 |
|
Alessandro Ranellucci
|
ca5dfc05e7
|
Accept STL files with spaces at the end of vertex lines. #119
|
2011-12-14 10:29:08 +01:00 |
|
Alessandro Ranellucci
|
cf33ec0a5c
|
Notes about integration with Pronterface
|
2011-12-13 21:51:07 +01:00 |
|
Alessandro Ranellucci
|
569e737ae1
|
Only connect infill edges when not doing solid surfaces
|
2011-12-13 17:36:03 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
869cb48c1a
|
Merge branch 'master' of github.com:alexrj/Slic3r
|
2011-12-12 17:35:18 +01:00 |
|
Alessandro Ranellucci
|
3c2b2cfef2
|
Bugfix: duplicate options did not work correctly for copies > 2. #113
|
2011-12-12 17:32:45 +01:00 |
|
Alessandro Ranellucci
|
344a038fea
|
Merge pull request #114 from rtgoodwin/add_scale_output
Added scale to settings output in gcode
|
2011-12-11 14:22:39 -08:00 |
|
Richard Goodwin
|
557afcc4b1
|
Added scale to settings output
|
2011-12-11 15:32:47 -06:00 |
|
Alessandro Ranellucci
|
9a610395ce
|
Move post-processing to utils/ directory
|
2011-12-11 10:20:53 +01:00 |
|
Alessandro Ranellucci
|
e99de80cd8
|
Merge pull request #111 from triffid/z-every-line-postprocessing-script
Z every line postprocessing script
|
2011-12-11 01:20:22 -08:00 |
|