Alessandro Ranellucci
b35c41c1a3
Bugfix: retraction was still not working correctly at tool change
2012-08-22 20:31:03 +02:00
Alessandro Ranellucci
4bddb66513
Always emit T0 at the beginning of a multi-extruder print
2012-08-22 19:20:34 +02:00
Alessandro Ranellucci
075213c731
Refactoring: make 'retracted' an attribute of the Extruder object
2012-08-22 18:57:03 +02:00
Alessandro Ranellucci
3c2464abf9
Bugfix: crazy temperatures were written when using sequential printing. #625
2012-08-22 17:58:38 +02:00
Alessandro Ranellucci
26e033a30c
Bugfix: brim was positioned incorrectly if no skirt was enabled. #627
2012-08-19 20:30:17 +02:00
Henrik Brix Andersen
0f327ef912
Add missing use File::Spec
2012-08-07 23:37:16 +02:00
Alessandro Ranellucci
c7858912d8
Bugfix: some paths were not considered when generating brim
2012-08-07 22:04:58 +02:00
Alessandro Ranellucci
63e77fcfd8
Refactor extruder settings
2012-08-07 20:50:54 +02:00
Alessandro Ranellucci
b7d8444ac8
Take support material into account when generating brim. #490 #501 #567
2012-08-06 20:54:49 +02:00
Alessandro Ranellucci
9bfa4118a1
Bugfix: brim and skirt collision was not precisely detected when they had similar offsets. #548
2012-08-06 20:27:10 +02:00
Henrik Brix Andersen
0e620f3ad2
Make --output accept directories. #535
2012-08-01 17:12:16 +02:00
Henrik Brix Andersen
83fccf0875
Fix auto-arrange of objects
2012-07-30 19:30:41 +02:00
Alessandro Ranellucci
4c33eabc6e
Slicing from plater was still using the default options
2012-07-29 17:02:46 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Alessandro Ranellucci
1d04e15b63
Refactor/clean up. Merge remove_small_surfaces() into prepare_fill_surfaces(), rename infill_every_layers() to combine_infill(), remove $layer->fill_boundaries, initialize layer properties explicitely for clarity.
2012-07-22 21:00:02 +02:00
Alessandro Ranellucci
3edf42e98e
Little workflow simplification
2012-07-21 15:53:38 +02:00
Alessandro Ranellucci
bce2663ed8
Restore thin walls and thin fills after last commit
2012-07-20 15:02:25 +02:00
Alessandro Ranellucci
1697cb24a6
Memory optimization and code cleanup. Don't keep deserialized paths
2012-07-20 14:39:56 +02:00
Alessandro Ranellucci
3c00573805
Reset E and compensate retraction after changing extruder
2012-07-06 19:57:58 +02:00
Mark Hindess
07f2dab5f6
Fix perimeters_* options to be singular to be consistent.
2012-06-30 23:18:15 +01:00
Alessandro Ranellucci
cbb111ee64
Fix for incomplete commit causing thin gaps to throw an error
2012-06-30 17:23:55 +02:00
Alessandro Ranellucci
5eb1982081
Bugfix: brim was extruded multiple times when sequential printing was enabled
2012-06-30 16:14:45 +02:00
Alessandro Ranellucci
a7668e0933
Revert "Reduce memory usage during gcode output by discarding processed layers."
...
This reverts commit 4d1551c305
2012-06-30 16:12:06 +02:00
Mark Hindess
4d1551c305
Reduce memory usage during gcode output by discarding processed layers.
...
As each layer is processed, it increases in size by a factor of two
or three so by the end the layer list gets quite big. So this removes
the list entry after it's been processed.
2012-06-29 12:33:30 +01:00
Alessandro Ranellucci
fb96cdec76
Command line options to assign perimeters and infill to different extruders
2012-06-28 16:48:56 +02:00
Alessandro Ranellucci
f9f2361acb
Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture
2012-06-28 16:22:11 +02:00
Alessandro Ranellucci
dbcfebeb66
Rename support_material_tool to support_material_extruder
2012-06-28 15:14:27 +02:00
Alessandro Ranellucci
898266fd34
Initial refactoring for supporting multiple extruders. Little speed optimization included
2012-06-28 14:44:54 +02:00
Alessandro Ranellucci
e72bd56b9d
Rename brim_thickness to brim_width
2012-06-23 22:27:59 +02:00
Alessandro Ranellucci
48addf8c3f
New feature: brim. #424
2012-06-23 21:31:29 +02:00
Alessandro Ranellucci
44c636aea1
Do not oversimplify outer perimeters and keep the full resolution of the input file. #340 #462
2012-06-23 20:08:08 +02:00
Alessandro Ranellucci
20229fccdb
Bugfix: fatal error when a layer contained nothing
2012-06-23 18:31:24 +02:00
Alessandro Ranellucci
464400a37b
Bugfix: when skirt distance was set to zero, the first loop coincided with the outer perimeter of the object
2012-06-23 17:44:05 +02:00
Alessandro Ranellucci
05e4571310
Do perimeters from outside to inside. #466
2012-06-23 17:41:44 +02:00
Alessandro Ranellucci
b926e0b27d
Support material lines need to be white
2012-06-11 20:42:39 +02:00
Alessandro Ranellucci
55ed4af06e
DLP support material in SVG output (untested)
2012-06-11 14:47:48 +02:00
Alessandro Ranellucci
1f35a3f6aa
Fixed regression preventing SVG export to work properly. #428
2012-06-11 13:50:38 +02:00
Alessandro Ranellucci
c0c84d13b8
Always set bed temperature after first layer if first layer temperature is set. #427
2012-06-11 13:43:23 +02:00
Alessandro Ranellucci
3e94add8a8
Pass config options as environment variables to post-processing scripts
2012-06-09 17:52:03 +02:00
Alessandro Ranellucci
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
aedb6cc35f
Accept both relative and absolute extrusion width values. #151
2012-06-06 15:23:34 +02:00
Alessandro Ranellucci
ea83c562c1
Fixed regression caused by sequential printing code preventing skirt to extend past first layer. #396
2012-05-31 09:37:39 +02:00
Alessandro Ranellucci
8aa20cd784
Fixed the "Export SVG..." menu item. #399
2012-05-30 12:06:01 +02:00
Alessandro Ranellucci
bc4b4a981b
Take extruder clearance radius into account when autopositioning
2012-05-29 09:38:53 +02:00
Alessandro Ranellucci
34e3dfdb08
Large memory savings (down to about 50%) for high-res input files
2012-05-28 19:58:27 +02:00
Alessandro Ranellucci
5a78111efa
Options to set extruder clearance for sequential printing and graphical preview of collisions
2012-05-23 11:47:52 +02:00
Alessandro Ranellucci
e7d609db12
Fix previous commit about slicing from smallest to tallest
2012-05-21 20:23:17 +02:00
Alessandro Ranellucci
e4b37db13f
Print objects from the smallest to the tallest to avoid extruder collisions (this applies when using the complete_objects setting)
2012-05-21 20:19:30 +02:00
Alessandro Ranellucci
181f750618
Invert SVG colors for DLP printing. #380
2012-05-21 18:29:19 +02:00
