3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
12,747 Commits 1 Branch 1 Tag 249 MiB
bf2a10803e
Commit Graph

2024 Commits

Author SHA1 Message Date
bubnikv
348bf39012 Fix of the previous commit: Fixed sequential print unit tests. 2020-02-07 14:43:13 +01:00
bubnikv
b8c898bf40 Fixed a bug in validation of the FDM Print to check for extruder 
collisions against already printed objects: Rotation of an object
was not being taken into account.
Fixes #2450 PrusaSlicer 2.0 Sequential printing vs rotate object
Fixes #3585 Always Sequential Printing Error (Regardless of setting, placement or object size)

Fixed some collisions in sequential print just after arrangement by
making the validation using a slightly lower extruder radius value
than the arrangement.

Refactored PrintObject coordinate system so that the PrintObject's
coordinate system is always centered in respect to its ModelObject's
geometries. This refactoring may improve path planning a bit and
it may lower the requirements on bits representing Clipper coordinates
by 1 bit.
 2020-02-07 14:10:27 +01:00
Enrico Turri
a1c0a29af2 ENABLE_BACKWARD_COMPATIBLE_RELOAD_FROM_DISK - Fixed inconsistencies for splitted and cutted objects 2020-02-07 09:49:48 +01:00
YuSanka
455f36119a Localization: Updated PrusaSlicer.pot and list.txt 
+ added missed icons
 2020-02-06 20:37:12 +01:00
Lukas Matena
665bc9e960 Hollowing: allow to place drain holes on the inner surface of a hollowed cavity 
Drain holes are not allowed to be placed on its own inner surface. This was recently (0e3ebb3)
done by forcing invalidation of the slaposDrillHoles, which also invalidates and therefore
hides the drilled mesh. However, that also hides the hollowed mesh and it is not possible
to place holes inside the cavity.

This change does not dump the drilled mesh, but checks that no raycast hit ends up in a hole.
 2020-02-06 17:58:26 +01:00
bubnikv
fb235cb675 Color change - handling Color Change data stored for different 
printer configuration:

ss -> sm : Just apply the color changes of the original ss project at the active extruder.
ss -> mm : There are no tool changes stored. Ignore color changes, they are invalid because they are extruder non-specific.

sm -> ss : Apply tool changes as color changes (tool changes remember the target color), apply original color changes.
sm -> mm : Ignore both color changes and tool changes.

mm -> ss/sm : Ignore both color changes and tool changes.
 2020-02-06 14:03:27 +01:00
Enrico Turri
f37a31596c Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_labels 2020-02-06 09:15:15 +01:00
tamasmeszaros
d58f451d5d Merge branch 'tm_cgal_improvements_SPE-1088' 2020-02-05 17:56:52 +01:00
tamasmeszaros
bd76c345f2 Handle CGAL exceptions and add tests for mesh boolean operations 
Add conversion to exact predicates exact construction kernel format for consecutive booleans (experiments)
 2020-02-05 17:40:05 +01:00
bubnikv
495a71ed00 Implemented top_solid_min_thickness / bottom_solid_min_thickness. 
The two new config keys define a minimum vertical shell thickness.
The top shell thickness is calculated as a maximum of sum over
top_solid_layers * layer heights and top_solid_min_thickness,
the bottom shell thickness is calculated as a maximum of sum over
bottom_solid_layers * layer heights and bottom_solid_min_thickness.

The results of the formula above are shown at the Print parameter page
below the two new values to hint the user about the interaction
of the old versus new config values.

top_solid_min_thickness has no meaning if top_solid_layers is zero,
bottom_solid_min_thickness has no meaning if bottom_solid_layers is zero.
 2020-02-05 16:53:48 +01:00
Enrico Turri
5c4b481e35 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_labels 2020-02-05 15:27:20 +01:00
tamasmeszaros
a66dcf58f7 Fix for failing build without PCH 2020-02-05 09:57:22 +01:00
bubnikv
bca3e86455 Fixed invalidation of FDM back end if a custom per layer 
extruder change is added or removed.
 2020-02-04 17:46:31 +01:00
bubnikv
059bdb4711 Implemented handling of complex ConfigOptionFloatOrPercent chains 
by the PlaceholderParser.

Namely, all the options with the "ratio_over" reference are now handled
correctly by the PlaceholderParser with the exception
of the "first_layer_extrusion_width", which overrides speed of extrusions
by their respective extrusion type.

Also the various extrusion widths (extrusion_width, first_layer_extrusion_width,
external_perimeter_extrusion_width etc.) produce the same numbers
as if ran through the back-end, with the assumption of not overriding
layer height by the variable layer height editing tool or layer height
modifiers.
 2020-02-04 15:27:38 +01:00
Lukas Matena
808cf2e38a Hollowing: merge meshes of holes with igl (intersecting holes) 2020-02-04 15:03:10 +01:00
Enrico Turri
dc393e2f0a Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_labels 2020-02-04 12:28:06 +01:00
Lukas Matena
d0f21dda4a Make sure that when drill holes are manipulated with, all data are invalidated properly 
It is needed to regenerate hollow_mesh_with_holes completely, it may contain holes that were deleted by the user in the meantime
 2020-02-03 17:31:18 +01:00
tamasmeszaros
ad3e3be3bc optimize string_printf 2020-02-03 17:11:24 +01:00
tamasmeszaros
0c4797e92e use vsnprintf instead of snprintf in string_printf function 
Also, revert to old location: Utils.hpp and utils.cpp
 2020-02-03 16:00:53 +01:00
Lukas Matena
227cc4dc33 Fixed conflicts after merge 
slaposHollowing was divided into slaposHollowing and slaposDrillHoles on master
This commit takes this into account on the code that was merged from lm_drilling_backend_rebased
 2020-02-03 15:42:54 +01:00
Lukas Matena
a1d4dab999 Merge branch 'master' into lm_drilling_backend_rebased 2020-02-03 15:20:16 +01:00
Enrico Turri
6fa49f5931 Added sequential print order id to 3D scene labels 2020-02-03 11:44:26 +01:00
Enrico Turri
0937c576ac Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_labels 2020-02-03 11:43:37 +01:00
tamasmeszaros
992a0c3d7a remove duplicate string_printf 
#3594, #3592
 2020-02-03 11:19:11 +01:00
tamasmeszaros
8aec5f6726 string_printf Wformat-security hack # 
#3594, #3592
 2020-02-03 11:09:54 +01:00
Enrico Turri
251a7d1329 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_labels 2020-02-03 08:23:55 +01:00
tamasmeszaros
36e92b0141 Put hole drilling into separate step 2020-01-31 08:58:21 +01:00
Lukas Matena
4bc4e347fb Fixed a crash during cut (typo introduced in 645f13a) 2020-01-31 08:54:41 +01:00
bubnikv
9ef65b23d8 Implemented loading of hollowed SLA mesh into the scene 
in place of the normal mesh.

WIP: The code is inefficient (it does not store the timestamp
of the hollowed mesh, therefore it refreshes the hollowed mesh on each
scene update) and if the hollowing gets invalidated, the original mesh
is currently not being reloaded and the hollowed mesh is still visible.
 2020-01-30 17:58:49 +01:00
bubnikv
1278aabf3e Fixed some compiler warnings. 2020-01-30 13:00:51 +01:00
bubnikv
c5fa400208 Fixed regression of 71fa411100 
where the PrintObject bounding box was not invalidated correctly
when the transformation matrices of instances changed.

Also refactored PrintObject::size() for const correctness.
 2020-01-30 12:22:30 +01:00
Lukas Matena
b0aa937215 Trying to improve drilling stability by handling CGAL exceptions 2020-01-29 15:57:49 +01:00
Enrico Turri
16fa68df0c Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_labels 2020-01-29 14:46:09 +01:00
tamasmeszaros
7156ed9987 Remove redundant code 2020-01-29 14:13:21 +01:00
Lukas Matena
b41c6d7d64 Refuse to drill a broken mesh 
Hole parameters defaults and limits changed a bit
 2020-01-29 14:07:12 +01:00
Enrico Turri
504413cc91 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_labels 2020-01-29 12:31:50 +01:00
Lukas Matena
5ae2f8a467 Function sla_trafo made accessible from outside SLAPrint.cpp unit 2020-01-29 10:07:10 +01:00
tamasmeszaros
6988752d05 Re-apply fix for Win32 2020-01-28 15:24:23 +01:00
tamasmeszaros
9d0d0cde21 Fix broken build on non-linux platforms 2020-01-28 15:08:07 +01:00
tamasmeszaros
04a58e41c4 Fix cgal when used from distro package 
fix CMake -frounding-math propagation from CGAL.
 2020-01-28 14:49:39 +01:00
Enrico Turri
d5b258c267 1st installment of object/instance labels in 3D scene 2020-01-28 13:15:21 +01:00
Enrico Turri
69549af9ac Invalidate object bounding box after arrange 2020-01-28 11:11:45 +01:00
bubnikv
dced3ce783 Fix of 2.2.0-A3: Sequential Printing: Wrong location after slicing #3570 
This is a regression from 71fa411
 2020-01-24 17:11:14 +01:00
tamasmeszaros
848fe4750f Add prusaslicer.ini to sl1 output zip 2020-01-24 15:23:59 +01:00
tamasmeszaros
743a03a8c2 append full config to sla zipped ini 
SPE-1081
 2020-01-24 14:31:31 +01:00
tamasmeszaros
7591637c89 Bugfixes and refactoring for SLA backend 
remove duplicate code


Mark conversion constructors of EigenMesh3D `explicit`


Working on mesh simplification for hollowed interior


Fix bug SPE-1074: crash with empty supports and disabled pad.


fix regression after refactor


Remove unfinished code


Fix missing includes and dumb comments
 2020-01-24 14:26:19 +01:00
tamasmeszaros
9f6ad70f0b Merge branch 'lm_tm_hollowing' 2020-01-24 13:51:49 +01:00
tamasmeszaros
c6a2b69419 32 bit MSVC workaround for CGAL 2020-01-24 13:41:37 +01:00
Lukas Matena
1c0aedbbe5 Hollowing gizmo can now trigger the backend calculation 2020-01-24 10:53:40 +01:00
Lukas Matena
d58ee47e4d Fixed incorrect hole normal transformation when the object is anisotropically scaled 2020-01-24 10:53:40 +01:00
Lukas Matena
022cc0871a Allowed to do drilling without hollowing 2020-01-24 10:53:40 +01:00
tamasmeszaros
6b0af43665 Use mesh boolean in the backend to drill holes. 2020-01-24 10:53:40 +01:00
tamasmeszaros
b45e95877e Merge branch 'master' into lm_tm_hollowing 2020-01-23 17:43:18 +01:00
tamasmeszaros
cb39f6b212 Use CheckAtomic differently 2020-01-23 17:20:02 +01:00
YuSanka
5ff8ae955b Implemented editing for extruder of existing ToolChangeCode tick 
+ Code refactoring: DoubleSlider is extracted from wxExtensions
 2020-01-23 16:11:21 +01:00
YuSanka
1ed313ab79 Synchronized mode of color_print data to/from 3mf/amf 
+ Code refactoring " CustomGCode extracted to separate namespace and file
 2020-01-23 16:11:21 +01:00
tamasmeszaros
75260eea12 Fix latomic linking on Mac 
SPE-1079
 2020-01-23 13:18:44 +01:00
tamasmeszaros
f8a5796ca5 add mesh simplification. 
SPE-1072 
Working but flipped normals with the interior.
Testing on treefrog passed
Oversampling for hollowed mesh should not be less than 3x
Flip back normals after simplify and remove redundant test code.
 2020-01-23 10:58:18 +01:00
bubnikv
71fa411100 Refactored PrintObject::m_copies to PrintInstances, 
so that the ordering code at G-code export may work directly with
pointers to PrintInstances instead of with pair of <PrintObject, copy idx>.
Also the PrintInstance knows its source ModelInstance, which allows
sorting of PrintInstances for sequential printing in the order
they appear in Plater's object list.
 2020-01-23 09:53:06 +01:00
bubnikv
cea7cbfaa0 The print order for sequential print now corresponds to the order 
at the object list.
Partial fix of https://github.com/prusa3d/PrusaSlicer/issues/3455
 2020-01-22 10:50:20 +01:00
bubnikv
094cef26d4 Fix of the new PlaceholderParser int() conversion. 
Fixes https://github.com/prusa3d/PrusaSlicer/pull/3271
Also some old errors (typos, UBs) were fixed.
 2020-01-21 17:12:06 +01:00
lukasmatena
6100a71406
Merge pull request #3548 from KyleMaas/fix-ooze-prevention-issue-2901 
Fix bug #2901 - Ooze Prevention on dual extruders (regression)
 2020-01-21 14:41:41 +01:00
Enrico Turri
2b93900ac0 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-01-21 14:07:22 +01:00
Enrico Turri
dd09077bba Reload from disk command enhanced to work with 3mf/amf files saved with PrusaSlicer 2.1.0 and earlier 2020-01-21 14:07:13 +01:00
David Kocik
93f9fc1049 Throwing exceptions with text after copy file check failure and renaming from .tmp failure 2020-01-21 13:39:27 +01:00
Lukas Matena
63b0eec5a9 Merge branch 'master' into lm_tm_hollowing 2020-01-21 13:00:07 +01:00
bubnikv
05ea01bdcc Ported PlaceholderParser unit tests to C++. 2020-01-21 12:10:09 +01:00
Vojtěch Bubník
071d3b2762
Merge pull request #3271 from smurfix/upstream 
Add int() and % (modulo) functions
 2020-01-21 04:15:56 -05:00
bubnikv
7efca35c27 Don't store "print_host", "printhost_apikey", "printhost_cafile" 
into the G-code.
 2020-01-21 09:55:44 +01:00
Jebtrix
5342ad8990 Fix [scale] from being assigned to [year] placeholder 
[year] in output filename format results in blank file name (Issue #2349)
 2020-01-20 11:27:00 -05:00
foxox
07d6fd8f7e Platter->Plater 2020-01-20 11:16:49 -05:00
bubnikv
5fe5378367 Fixed AstroBox upload type selection. 2020-01-20 16:57:50 +01:00
Enrico Turri
c87e951da5 #3536 - Fixed PrusaSlicer not closing the file when trying to open an invalid 3mf (actually any zip) file 2020-01-20 13:29:59 +01:00
tamasmeszaros
87f2578ee7 Try to fix libatomic linkage on raspbian 
SPE-1073
 2020-01-20 12:50:48 +01:00
tamasmeszaros
ce34ae4716 Try to fix libatomic linkage on raspbian 2020-01-20 10:38:40 +01:00
Enrico Turri
cbe5132832 #3540 - Fixed toolpaths preview for empty ranges 2020-01-20 10:38:01 +01:00
KyleMaas
53980d074e Fix bug #2901 2020-01-19 11:13:42 -05:00
Lukas Matena
d8f2c8cdab Fixed a bug in the hole-aware raycaster 2020-01-17 16:02:23 +01:00
Enrico Turri
b368f8ff24 Fixed conflicts after merge with master 2020-01-17 14:58:19 +01:00
YuSanka
2259f7b3e8 Code refactoring to mode comparison 2020-01-17 12:24:58 +01:00
Enrico Turri
cc19e9c48f ENABLE_KEEP_LOADED_VOLUME_TRANSFORM_AS_STAND_ALONE set as default 2020-01-17 12:12:38 +01:00
Enrico Turri
94a3d38afd ENABLE_3DCONNEXION_DEVICES_CLOSE_SETTING_DIALOG set as default 2020-01-17 11:45:52 +01:00
Enrico Turri
4eee702984 ENABLE_ADAPTIVE_LAYER_HEIGHT_PROFILE set as default 2020-01-17 11:26:26 +01:00
Enrico Turri
ccb126a5f4 ENABLE_RELOAD_FROM_DISK_MISSING_SELECTION set as default 2020-01-17 11:07:10 +01:00
Enrico Turri
b6ab6378d7 ENABLE_VIEW_TOOLBAR_BACKGROUND_FIX set as default 2020-01-17 10:50:25 +01:00
Enrico Turri
dad09c737c ENABLE_GIZMO_ICONS_NON_ACTIVABLE_STATE set as default 2020-01-17 10:34:32 +01:00
Enrico Turri
34aac7e292 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_6dof_camera 2020-01-17 08:13:58 +01:00
Enrico Turri
67655743b9 Follow-up of merge of pull request #3293 -> Fixed missing include (for MAC build) 2020-01-16 16:18:35 +01:00
YuSanka
52c590f57a Merge remote-tracking branch 'origin/ys_cp_improvements' 2020-01-16 16:06:19 +01:00
Enrico Turri
46819224ee Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-01-16 16:03:14 +01:00
Enrico Turri
75c2b44d23 Follow-up of merge of pull request #3293 -> Fixed link error and toolpaths role colors 2020-01-16 16:02:40 +01:00
YuSanka
89fcd7f95a Added "mode" variable for custom_gcode_per_print_z 2020-01-16 16:01:19 +01:00
YuSanka
20fd874ff2 Merge remote-tracking branch 'origin/master' into ys_cp_improvements 2020-01-16 15:01:57 +01:00
bubnikv
3acfae92e1 Fix of recent wipe tower / tool ordering refactoring. 2020-01-16 14:59:16 +01:00
tamasmeszaros
fada7224f1 MeshBooleans with CGAL only 2020-01-16 14:31:31 +01:00
YuSanka
099118d6f2 Merge remote-tracking branch 'origin/master' into ys_cp_improvements 2020-01-16 14:02:19 +01:00
Enrico Turri
6be4b3865b Merge remote-tracking branch 'foxox/feature/ScaleSpeedLegendToVisible2' 2020-01-16 13:55:59 +01:00
bubnikv
1b354d8d3c WIP: Enhancement of the FDM back end to support Color Change situations, 
when a project was switched from multi-extruder printer to single
extruder printer.
 2020-01-16 13:39:03 +01:00
Enrico Turri
9f7feedc8b Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_6dof_camera 2020-01-16 09:18:21 +01:00
tamasmeszaros
e6bdec4aa5 Remove wrapper around std::mt19937 2020-01-15 17:44:15 +01:00
bubnikv
8e5ba5ccc5 Added synonyms to some PrintSteps: 
psWipeTower now equals to new psToolOrdering indicating that
the ToolOrdering has been calculated (only if non-sequential mode is active).

psBrim now equals to new psExtrusionPaths
psExtrusionPaths shall be the last step before psWipeTower, indicating
that all the printing extrusions are calculated for the G-code preview
slider to edit the custom per print_z color changes, tool changes etc.
 2020-01-15 16:20:16 +01:00
YuSanka
15f873dd74 DoubleSlider: Implemented code for check of used extruders for MustiAsSingle mode 2020-01-15 15:35:56 +01:00
Enrico Turri
62e60bcb43 Six degrees of freedom camera - 1st installment 2020-01-15 12:49:34 +01:00
bubnikv
2c958c021d Fixed regression in placement of Color Change event at the correct layer. 2020-01-14 17:35:42 +01:00
bubnikv
10d1b459bb Fix of 
Skirt loops not being honored, only producing single loop #2193
First layer skirt only has half the loops when using multiple extruders #469

The skirt generator used to prime all printing extruders at the 1st layer
if enough skirt lines were configured, while at the other layers the skirt
used to be printed with the 1st extruder printing the layer.

There was a bug introduced quite a long time ago, where not enough skirt
lines were extruded if some extruders were not needed to print the 1st layer.

Newly the skirt generator works the same way on all layers:
All the extruders planned to print a layer are primed over the skirt
if enough skirt lines are configured.
 2020-01-14 16:38:34 +01:00
bubnikv
390376daae Fix of recent refactoring of color print. 2020-01-14 16:11:03 +01:00
Lukas Matena
fd6c9582d5 Refactoring fix: making sure that mark_wiping_extrusions doesn't report it wiped something it didn't 2020-01-14 15:43:43 +01:00
bubnikv
ab6a2b71e8 Another bugfixes of GCode export after refactoring. 2020-01-14 15:12:45 +01:00
bubnikv
b54ce0d468 Fixing GCode Skirt generator after refactoring. 2020-01-14 14:24:38 +01:00
bubnikv
c96fc5eb51 gcc & clang do not like taking reference of const temporaries. 2020-01-14 12:10:01 +01:00
bubnikv
98e49772ed Custom G-code references are now being assigned to ToolOrdering::LayerTools() 
and the superfluous M600 (color change) events are filtered out there.

Fixed a handful of compiler warnings.
 2020-01-14 11:54:09 +01:00
tamasmeszaros
e6244f7bdb Eliminate use of uninitialized variable. 2020-01-14 10:48:22 +01:00
tamasmeszaros
ce49f0a294 Test sla support point generation determinism with seed parameter 2020-01-14 10:48:22 +01:00
tamasmeszaros
6205524d75 Make support point generator deterministic. 2020-01-14 10:48:22 +01:00
tamasmeszaros
90fbbf401f Refactor model facing support generation. 
Fix for touching junction when adding aux pillars.


Fix issue with overly long support bridges.
 2020-01-14 10:48:22 +01:00
tamasmeszaros
45220e26c0 Fix zero elevation support maneuvers and comment to clarify the alg. 2020-01-14 10:48:22 +01:00
Lukas Matena
d0d73e6109 Hollowing config values contain min/max values, these are respected when setting through the gizmo 
Rendering and hole transformation fixes (still WIP, though)
 2020-01-14 10:33:10 +01:00
bubnikv
8bfc986fa7 Refactoring of GCode::process_layer(). 
Refactoring of GCode export of color changes, extruder switches etc,
so that the "color change" like extruder switches are applied first
at the Wipe Tower / G-code export, so that adding / removing
an extruder switch at the G-code preview slider does not invalidate
slicing.
 2020-01-14 10:31:18 +01:00
bubnikv
79d7a0130f Fixing some missing throw statements. 
Adding noexcept to move constructors / operators.
 2020-01-13 17:41:40 +01:00
Enrico Turri
91acbd01ed Fixed GCodeAnalyzer and GCodeTimeEstimator to avoid artifacts while rendering toolpaths due to numerical issues on extruder coordinate 2020-01-13 15:27:37 +01:00
bubnikv
9038dc21e8 Fixing regression issue after G-code export refactoring. 2020-01-10 15:51:35 +01:00
bubnikv
702a489b03 Fixing compilation isue on non-MS compilers. 2020-01-10 11:53:39 +01:00
bubnikv
15eedef74b Refactoring of ToolOrdering (wipe into infill / object) 
Refactoring of GCode::_do_export()
Helper lower_bound and search functions similar to std, but without
needing the value object explicitely.
 2020-01-10 11:27:04 +01:00
bubnikv
cc2b9b8849 ToolOrdering: Removed unused parameter. 2020-01-10 11:27:04 +01:00
Lukas Matena
f22961edae Fixed a raycaster problem with handling duplicate hits from igl 
The duplicate hits confused winding number calculations in the raycaster, which in turn returned incorrect hit.
 2020-01-09 14:09:26 +01:00
bubnikv
5bb9ba64c2 Fix of previous commit 2020-01-09 10:14:50 +01:00
bubnikv
de70adca9c Optimization of G-code export: Don't make copies of ExtrusionEntities 
when sorting them into Extruders / Islands / Regions.
 2020-01-09 10:00:48 +01:00
tamasmeszaros
578fcbc37c Performance improvements in raycaster 2020-01-08 17:12:06 +01:00
tamasmeszaros
bb62f36df3 Add tests for EigenMesh3D raycaster with hole support. 
Tests fail! Supports are intersecting the object when holes are added.
 2020-01-08 17:11:22 +01:00
YuSanka
0aaa7dd076 Small fix for 3e0690b37b 2020-01-08 15:44:39 +01:00
bubnikv
3e0690b37b Further optimizations of G-Code generator when Wipe into object / infill: 
Don't do unnecessary tests if it is known that there is
no Wipe into object or infill active.
 2020-01-08 15:16:31 +01:00
bubnikv
e0811e4aa5 Optimization of G-code export: 
1) Don't allocate ExtruderOverrides if not necessary
2) Use boost::container::small_vector<int32, 3) for ExtruderOverrides
   (usually less than 4 instances are printed))
 2020-01-08 14:58:24 +01:00
Enrico Turri
abd432e7a8 Configurable paths export (fullpath or not) to 3mf and amf 2020-01-08 11:11:38 +01:00
tamasmeszaros
a3a99d7a07 Do not translate the normal of drainhole points. 2020-01-08 10:49:54 +01:00
tamasmeszaros
f874b61881 Transform the position AND the normals of drainhole points 2020-01-08 10:10:24 +01:00
bubnikv
81187e7e0e Some refactoring and const correctness fixes. 2020-01-07 14:35:43 +01:00
Enrico Turri
5b2e2fe7b3 Fixed artifacts on toolbar and gizmobar icons showing up when changing screen or toolbar scale factors 2020-01-07 12:40:03 +01:00
Lukas Matena
0551411c48 Merge branch 'master' into lm_tm_hollowing 2020-01-06 12:41:29 +01:00
Enrico Turri
cc7b0297a0 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-01-06 12:11:07 +01:00
Enrico Turri
c790e2ff7c Added unit test for checking geometry after save+load to 3mf cycle 2020-01-06 12:10:57 +01:00
Lukas Matena
68d0f5b4ef Corrected description of --loglevel parameter on command line output 2020-01-06 12:07:23 +01:00
Spencer Owen
e7b835dc52 Add Astrobox to Print Host options 2020-01-06 03:37:35 -05:00
bubnikv
5294c85dfc Some minor polishing of Color print back end. 2020-01-06 09:32:13 +01:00
bubnikv
9406b50447 Const correctness improvements: 
removed some unnecessary const_casts that remove const.
 2020-01-03 16:33:04 +01:00
Enrico Turri
80ef0e0334 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-01-03 14:43:02 +01:00
Enrico Turri
83cbe1dd33 3DConnexion devices' Y axis used for zoom in/zoom out 2020-01-03 14:42:52 +01:00
bubnikv
3d17543d40 Fix of "Don't use bridging perimeters on top of elephant-foot compensation #3011" 
If the Elephant foot compensation is applied to the 1st object's layer,
the uncompensated 1st object's slice is newly used for calculation
of bridges, overhans, skirt, brim, raft and supports.

Layer::slices were renamed to Layer::lslices to simplify reading
of the code, to differentiate from LayerRegion::slices.
 2020-01-03 14:07:31 +01:00
Enrico Turri
3d5e32a876 #3435 - Added object's instances count into Slic3r_PE_model.config inside exported .3mf files 2020-01-02 11:37:50 +01:00
bubnikv
0808c8fa3c Refactoring and documentation of check_copy() and copy_file() 2019-12-22 11:11:48 +01:00
Lukas Matena
13f1bb2e43 An attempt to fix missing renaming from .gcode.tmp to .gcode 
Added a missing include
 2019-12-21 12:31:32 +01:00
bubnikv
cefe0ba13c Merge remote-tracking branch 'remotes/origin/dk_copy_file' 2019-12-20 15:08:31 +01:00
Enrico Turri
e9bb3c2450 3mf and amf import: keep loaded volumes transformation as a member of ModelVolume without applying it to the mesh 2019-12-20 12:11:58 +01:00
Lukas Matena
b3f15b1c98 Merge branch 'master' into lm_tm_hollowing 2019-12-20 10:33:53 +01:00
Lukas Matena
cfd0fa9ae5 Merge branch 'lm_common_gizmos_data' into lm_tm_hollowing 2019-12-20 10:24:37 +01:00
Lukas Matena
d1f86e0a80 SLA supports gizmo now uses hollowed mesh when available 
Bugfix: SLA support tree is is now given the hollowed mesh, not the original
Added ImGui separators and change background alpha in hollowing gizmo dialog (to match the other gizmos)
 2019-12-20 10:17:59 +01:00
David Kocik
31b134bfcc copy file into .tmp and then rename if correct 2019-12-19 15:36:00 +01:00
bubnikv
26b7dbd6f5 Improved accuracy of ModelVolume matrix store / restore 
into the 3MF / AMF.
Improved accuracy of ModelVolume's mesh transform back from Object's
coordinate space to its own coordinate space after reloading
from 3MF / AMF.
 2019-12-19 12:27:49 +01:00
bubnikv
2bf472988b We can now use std::exchange() as we switched to C++17 2019-12-19 12:27:49 +01:00
tamasmeszaros
42ffc4e3c5 Fix polytree traversal. 
Put back old traverse_pt and union_pt_chained
 2019-12-19 11:27:19 +01:00
tamasmeszaros
2feb8421e9 Divide pad blueprint before its filtered. 
Filtering may remove the outer pad and the division expects an outer part to be present.
 2019-12-19 10:59:21 +01:00
David Kocik
2ee2180869 Merge branch 'dk_remote_devices' into dk_copy_file 2019-12-19 10:11:16 +01:00
Enrico Turri
f8adf99c8d Rolled back version numbers for 3mf and amf files 2019-12-19 09:41:30 +01:00
Enrico Turri
fecd89fa38 Do not allow to apply reload from disk command to objects whose mesh has been modified after non uniform scale operations 2019-12-19 09:21:57 +01:00
Enrico Turri
750ea439bb Do not allow to apply reload from disk command to objects splitted using split to objects or split to volumes commands 2019-12-19 08:05:57 +01:00
bubnikv
fd3651d994 Fixed C++17 incompatibility. 2019-12-18 18:14:06 +01:00
David Kocik
ef250ad539 copy check only if path is on removable device 2019-12-18 14:09:16 +01:00
David Kocik
a68ede6f2d check_copy function 2019-12-18 13:13:40 +01:00
YuSanka
f7e06ded67 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-12-17 14:16:58 +01:00
YuSanka
8824468882 Added function to update of custom_gcode_per_print_z in Model from configuration 
considering "colorprint_heights" option.

Changed thumb_up/down icons to better preview (feedback from #3256)

Commented some uncertain code
 2019-12-17 14:16:38 +01:00
bubnikv
aff5adaaa0 Fixed a typo in extrusion ordering, pointed by @supermerill 2019-12-17 10:55:50 +01:00
tamasmeszaros
11b98b2241 Deal with cmake warnings caused by find CGAL 2019-12-17 10:12:37 +01:00
YuSanka
afcc6bbb08 Code refactoring for Color change implementation 2019-12-17 08:37:50 +01:00
Enrico Turri
43213b9548 Added [X] and [Close] buttons to close 3Dconnexion setting imgui dialog by clicking on them 2019-12-16 13:35:45 +01:00
tamasmeszaros
66759e10e3 Add opencsg demo sandbox 2019-12-16 11:13:20 +01:00
tamasmeszaros
464ec8da6a Add MeshBoolean.cpp with CGAL as object library. 2019-12-16 11:08:36 +01:00
bubnikv
b061904ad8 Fixes by @supermerill from pull request "ShortestPath fix" #3306 2019-12-13 15:40:42 +01:00
Lukas Matena
f60ff1c7ce Fixup of previous commit: actually adding new source files 2019-12-13 15:08:44 +01:00
bubnikv
65772958b7 Improved adaptive layer height metrics: Using the area of a triangle 
delimited by the extrusion stepping and the sloping surface.
This leads to a yet different metric from Cura or upstream Slic3r.
 2019-12-13 13:43:16 +01:00
Lukas Matena
2cb30f3641 First prototype of CGAL hole-drilling 2019-12-13 13:42:10 +01:00
Lukas Matena
537260494d Merge branch 'master' into lm_tm_hollowing 2019-12-12 11:37:33 +01:00
Lukas Matena
c284a65caa Warning fix: removed needless tautological check 2019-12-12 10:45:30 +01:00
Enrico Turri
57d069bd0a Some rework on layout of imgui dialogs 2019-12-11 15:30:25 +01:00
Lukas Matena
e747577271 Added a validation check to reject wipe tower in sequential prints 
This scenario was never supported (#3283)
 2019-12-11 08:12:19 +01:00
bubnikv
d0aad74c27 Fixed update logic to support newer index downloaded from the internet 
than the index stored in the resources.
 2019-12-10 17:49:09 +01:00
Enrico Turri
b63b5125b6 Enable selection for missing files in reload from disk command 2019-12-10 14:42:28 +01:00
Enrico Turri
bdfed9d9ef Attempt to fix view toolbar background not showing up on Mac when using dark mode 2019-12-10 10:56:21 +01:00
Enrico Turri
a7b12f97db Gray icons for gizmos in disabled state 2019-12-09 15:21:18 +01:00
Enrico Turri
61ab9e37d6 #3287 - Fixed GCodeAnalyzer and GCodeTimeEstimator when using Machinekit and Mach3/Linuxcnc gcode flavours 2019-12-09 11:40:26 +01:00
foxox
dea83da5b7 Speed legend scales depending on travel visibility. 2019-12-08 00:03:41 -05:00
tamasmeszaros
5d77c34567 Forgot to remove string_printf from 3mf.cpp 2019-12-06 16:28:14 +01:00
tamasmeszaros
5be66a52c0 add drain hole 3mf export and import 2019-12-06 15:47:58 +01:00
YuSanka
805a6c936c Localization improvements: Text correction 2019-12-06 13:58:23 +01:00
tamasmeszaros
60758abbb4 Merge branch 'tm_slice_func' 2019-12-05 13:38:33 +01:00
tamasmeszaros
514bb23c6c Add free functions to slice a TriangleMesh 2019-12-05 13:38:04 +01:00
Lukas Matena
4ba7cb7ede Fix of the wipe tower starting point 
see issues #2968, #3234 and #3248
 2019-12-04 13:47:02 +01:00
Lukas Matena
3ef34848c7 Fix of skirt: wipe tower was not correctly processed when rotated 2019-12-04 13:45:42 +01:00
bubnikv
4bce9e0eb9 Merge branch 'vb_libudev_explicit_linking' 2019-12-04 11:38:24 +01:00
Matthias Urlichs
329ad97a84 Add int() and % (modulo) 2019-12-04 09:32:22 +01:00
Enrico Turri
8a8c71429c Fixes into ENABLE_THUMBNAIL_GENERATOR_DEBUG 2019-12-03 12:44:20 +01:00
bubnikv
afa72da9d1 Fix of infill connecting along perimeter lines, 
new 3-opt iterative improvement of infill path (currently disabled,
it is extremely slow)
 2019-12-02 15:01:52 +01:00