Alessandro Ranellucci
|
3cf5f86ce0
|
Avoid G92 for Mach3. #220
|
2012-03-04 11:49:04 +01:00 |
|
Alessandro Ranellucci
|
c7006fed26
|
Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245
|
2012-03-03 22:16:38 +01:00 |
|
Alessandro Ranellucci
|
170d29a789
|
New --cooling option and checkbox to enable/disable fan and cooling control
|
2012-02-25 21:56:36 +01:00 |
|
Alessandro Ranellucci
|
1d0a852679
|
Cooling and fan control. #110
|
2012-02-25 21:01:00 +01:00 |
|
Alessandro Ranellucci
|
c3fc6ee66b
|
Fix regression introduced with f2e1fe5241
|
2012-02-21 20:16:03 +01:00 |
|
Alessandro Ranellucci
|
94a2585b97
|
Dual extruder for support material
|
2012-02-19 17:02:49 +01:00 |
|
Alessandro Ranellucci
|
7b67fae686
|
Support material
|
2012-02-19 12:03:36 +01:00 |
|
Alessandro Ranellucci
|
e0e2023a5a
|
Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179
|
2012-02-19 10:48:58 +01:00 |
|
Alessandro Ranellucci
|
74c71b4ef2
|
Acceleration control. #185
|
2012-02-10 14:53:44 +01:00 |
|
Alessandro Ranellucci
|
3e65af7457
|
Revert "New First layer flow ratio option. #182"
This reverts commit 99ef0865bb.
|
2012-01-30 14:51:05 +01:00 |
|
Alessandro Ranellucci
|
99ef0865bb
|
New First layer flow ratio option. #182
|
2012-01-30 14:25:14 +01:00 |
|
Alessandro Ranellucci
|
eb33c03926
|
Bugfix: flow wasn't adjusted for first layer according to its height setting. #182
|
2012-01-30 14:03:12 +01:00 |
|
Alessandro Ranellucci
|
f1b1454b36
|
Loops were not closing well
|
2012-01-21 11:51:31 +01:00 |
|
Alessandro Ranellucci
|
1c7564e4a4
|
Thin walls. #24
|
2011-12-30 17:17:37 +01:00 |
|
Alessandro Ranellucci
|
caf41f07dd
|
Output required filament length and volume to command line and to the gcode file itself
|
2011-12-20 15:29:15 +01:00 |
|
Alessandro Ranellucci
|
d63eabcfa5
|
Clip less from loops to avoid gaps
|
2011-12-17 19:54:35 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|
Alessandro Ranellucci
|
8e04d763f4
|
Don't increase flow for overlapping purposes when bridging
|
2011-12-16 10:53:22 +01:00 |
|
Alessandro Ranellucci
|
d346bc02cc
|
Comments are now disabled by default, new --gcode-comments option to enable them
|
2011-12-14 19:49:21 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
0a74e068a3
|
Merge branch 'infill-overlap'
|
2011-12-08 10:53:24 +01:00 |
|
Alessandro Ranellucci
|
d9a70ea80d
|
Customizable overlap ratio (it defaults to 0.15 now)
|
2011-12-08 10:53:07 +01:00 |
|
Alessandro Ranellucci
|
d813aea59a
|
Don't slow down retractions on bottom layer. #101
|
2011-12-08 10:28:23 +01:00 |
|
Alessandro Ranellucci
|
53bc9c7421
|
Customizable speed for small perimeters. #60
|
2011-12-04 20:50:03 +01:00 |
|
Alessandro Ranellucci
|
0aff5fab24
|
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
|
2011-12-04 16:24:46 +01:00 |
|
Alessandro Ranellucci
|
52c9897eda
|
New --extrusion-axis option; removed --no-extrusion
|
2011-12-01 22:34:21 +01:00 |
|
Alessandro Ranellucci
|
e99c9f9e5f
|
Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77
|
2011-12-01 22:04:23 +01:00 |
|
Alessandro Ranellucci
|
92e86a2259
|
Bugfix: plate was lifted even when retracting for Z change
|
2011-11-28 19:59:39 +01:00 |
|
Alessandro Ranellucci
|
3ad9ed74ae
|
New --solid-infill-feed-rate option. #68
|
2011-11-28 19:11:26 +01:00 |
|
Alessandro Ranellucci
|
4cdd0f6fd0
|
Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero.
|
2011-11-27 10:12:44 +01:00 |
|
Alessandro Ranellucci
|
8e7d00bb34
|
Avoid unnecessary retractions during infill. #29
|
2011-11-26 17:01:00 +01:00 |
|
Alessandro Ranellucci
|
25c85aada5
|
Renamed "filament packing density" to "extrusion multiplier". Same values. #4
|
2011-11-25 11:15:20 +01:00 |
|
Alessandro Ranellucci
|
3c0ea0b57f
|
New --extrusion-width-ratio option. #8
|
2011-11-25 11:10:35 +01:00 |
|
Alessandro Ranellucci
|
47d347e1b2
|
Revert "Disable retraction when moving over infill space. #29"
This reverts commit d6ed9c6f34.
|
2011-11-24 12:53:09 +01:00 |
|
Alessandro Ranellucci
|
d6ed9c6f34
|
Disable retraction when moving over infill space. #29
|
2011-11-21 12:37:12 +01:00 |
|
Alessandro Ranellucci
|
2abd8fe240
|
Bugfix: bottom layer speed settings were ignored.
|
2011-11-15 12:02:31 +01:00 |
|
Alessandro Ranellucci
|
c2a2d9ae6d
|
Combine Z changes and retractions using G0. #51
|
2011-11-14 12:45:20 +01:00 |
|
Alessandro Ranellucci
|
db35faeabb
|
New experimental --g0 option for fast retractions. #51
|
2011-11-14 12:15:32 +01:00 |
|
Alessandro Ranellucci
|
b123194522
|
New --no-extrusion option to disable E values
|
2011-11-13 18:26:31 +01:00 |
|
Alessandro Ranellucci
|
c5d5e4d244
|
Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28
|
2011-11-12 10:18:20 +01:00 |
|
Alessandro Ranellucci
|
b4e268efad
|
New --retract-lift option to lift Z while doing travel moves. #25
|
2011-11-07 15:58:47 +01:00 |
|
Alessandro Ranellucci
|
d620b46beb
|
Bugfix: arcs now work (some glitches in detecting their center, though). #30
|
2011-11-07 14:12:07 +01:00 |
|
Alessandro Ranellucci
|
8172bcb772
|
Bugfix: G2/G3 I and J coordinates were wrong. #30
|
2011-11-06 20:24:42 +01:00 |
|
Alessandro Ranellucci
|
6d6533831e
|
New experimental --gcode-arcs options to generate G2/G3 commands. #23
|
2011-10-28 14:13:44 +02:00 |
|
Alessandro Ranellucci
|
7f341cfcd3
|
New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill
|
2011-10-18 15:57:53 +02:00 |
|
Alessandro Ranellucci
|
f7335b6d1e
|
Bugfix: latest retraction changes broke retraction
|
2011-10-14 12:14:20 +02:00 |
|
Alessandro Ranellucci
|
e410410dc7
|
Refactoring. Point objects are now plain arrayrefs. Slicing is 30% faster.
|
2011-10-12 14:54:49 +02:00 |
|
Alessandro Ranellucci
|
82d8d0896f
|
Reset extrusion distance during retracts
|
2011-10-11 17:53:50 +02:00 |
|
Alessandro Ranellucci
|
ef485e511e
|
Remove useless F params to shrink gcode size (#14) and Reset E before exceeding 65535 (#13)
|
2011-10-11 16:04:50 +02:00 |
|
Alessandro Ranellucci
|
a7d5e643ae
|
Bugfix: couldn't set fill density to zero
|
2011-10-10 14:37:40 +02:00 |
|