Pascal de Bruijn
c27ab57c18
creality.ini: use 120C nozzle temp for bed leveling for CR-6 SE
...
it seems the CR-6 SE uses 120C for it's strain gauge based bed leveling,
so we'll make this our general default, so we can limit the number of
start_gcode variants we'll need to maintain.
this also introduces a 10 second dwell before any homing happens, to
allow the nozzle to warm up, so that any filament stuck on the nozzle
becomes somewhat pliable.
2021-01-25 20:32:22 +01:00
Pascal de Bruijn
5f9cf7cfae
creality.ini: Move print head further up for low prints
...
With low prints, moving the print head up 70mm can still be too low
to be able to remove a print conveniently, so make sure the print head
is at least 60% up at the end of a print.
2021-01-25 17:22:13 +01:00
Pascal de Bruijn
78354ee991
creality.ini: reduce prime line in start_gcode
...
reduce the prime line sufficiently so the Ender-2 no longer requires
a seperate start_gcode
the extrusion pressure is scaled proportionately, and reduced slightly,
as previously some nozzle ooze could happen between the prime line and
the skirt loops due to excessive pressure buildup
2021-01-24 13:09:22 +01:00
Pascal de Bruijn
6bcdf0999c
creality.ini: universal end_gcode improvement
...
Replace hardcoded print presentation coordinate with print_bed_max[1],
where we move the print bed ~3/4 of the bed size across the y axis
at the end of the print.
2021-01-24 12:40:52 +01:00
Pascal de Bruijn
4ede5c3959
creality.ini: Ender3 V2 naming consistency
2021-01-23 19:31:23 +01:00
Pascal de Bruijn
6955e8ec08
creality.ini: raise Das Filament PLA bed temp
...
At 50C prints with sharper corners can be prone te warping if the
first layer height isn't quite optimal, and given that most Creality
printers don't have ABL, it often isn't.
So to optimize chances of getting good non-warped prints, we keep
all PLA bed temps at 60C for Creality printers.
2021-01-23 19:12:01 +01:00
Pascal de Bruijn
231cd758c1
creality.ini: improve nonabl start_gcode
2021-01-23 19:09:29 +01:00
rtyr
23ddb33237
1.2.2 Added Prusament PVB. Added 0.8mm nozzle profiles.
2021-01-08 10:57:41 +01:00
rtyr
250ef23fd5
Updated 0.0.12 description
2021-01-08 09:44:09 +01:00
rtyr
ecb85b2166
Added Ender 3-V2.
...
Based on https://github.com/prusa3d/PrusaSlicer/pull/5702 .
2021-01-08 09:42:01 +01:00
rtyr
e8ab281cd0
TriLAB 0.0.6 - Added material TPU 93A
2021-01-06 20:35:37 +01:00
rtyr
615356b69c
Ender3V2 thumbnail
2021-01-06 13:36:44 +01:00
rtyr
ef5df08358
Initial FLSun bundle
...
https://github.com/prusa3d/PrusaSlicer/pull/5582
2021-01-03 20:59:36 +01:00
rtyr
7edb79ed11
1.2.1 Updated firmware version for MK2.5 family printers
2020-12-28 15:03:05 +01:00
rtyr
cd990cf5e0
Updated machine limits for Ender 5 and Ender 5 Pro
2020-12-28 14:36:57 +01:00
rtyr
ea327c2d8c
Creality 0.0.10
...
Parameter consistency improvements. Enabled conservative elephant foot compensation.
2020-12-21 15:21:26 +01:00
rtyr
f7d5032d0e
Bumped up version to 0.0.10
2020-12-21 15:20:29 +01:00
Pascal de Bruijn
71cb5d1469
Creality.ini: default to Generic PLA, and move defaults to common printer section
2020-12-18 18:55:29 +01:00
Pascal de Bruijn
33c36e6777
creality.ini: enable conservative elefant_foot_compensation
...
given the diversity of printers and bed types and a typical lack of
auto bed levelling, it will be impossible to get a good fit
for everyone by default.
A very conservative 0.1 for elefant_foot_compensation is unlikely
to cause overcompensation.
And I'd prefer to undercompensate as opposed to overcompensate
as a default.
2020-12-17 13:05:40 +01:00
Pascal de Bruijn
1cf97b9c93
Creality.ini: improve parameter consistency
2020-12-17 13:04:39 +01:00
rtyr
3f11877c8f
Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
2020-12-16 16:18:31 +01:00
rtyr
e9ee88c397
Fixed end g-code for Ender 5
2020-12-13 09:25:59 +01:00
rtyr
fe4f1b15c6
Anycubic 0.0.6
2020-12-08 22:16:13 +01:00
rtyr
beabe2fe7e
Anycubic Kossel. Updated end g-code, before layer change g-code and output filename format.
2020-12-08 22:12:15 +01:00
Nicolas North [norðurljósahviða]
fa8a72b2a3
Reduced max print height for Anycubic Predator to 445mm
2020-12-08 11:12:42 +01:00
rtyr
b0485e3949
TriLAB 0.0.5 Removed obsolete host keys.
2020-12-05 11:29:16 +01:00
rtyr
72a64c200b
Anycubic 0.0.5 Updated end g-code.
2020-12-05 11:23:07 +01:00
rtyr
02a63e8de2
LulzBot 0.0.2 Removed obsolete host keys
2020-12-05 11:19:53 +01:00
rtyr
4cffd490cc
BIBO 0.0.3 Removed obsolete host keys
2020-12-05 11:14:27 +01:00
rtyr
92f7bdcf92
0.0.8 min_slic3r_version changed to 2.3.0-beta2
2020-12-05 10:21:13 +01:00
rtyr
7cb7c5fd55
Changed layer_z to max_layer_z in end g-code.
2020-12-05 10:18:49 +01:00
rtyr
6716416add
Removed redundant line
2020-12-05 09:58:51 +01:00
rtyr
b95f9897b8
Updated end g-code. Added full_fan_speed_layer values.
2020-12-05 09:55:07 +01:00
rtyr
ee088e219e
Creality 0.0.8
2020-12-05 09:53:05 +01:00
rtyr
c4d97d3d9b
bumped up to 0.0.8
2020-12-05 09:51:38 +01:00
Pascal de Bruijn
e3a0a8878a
creality.ini: add Extrudr PLA NX2 spool weight
2020-11-29 19:05:02 +01:00
Pascal de Bruijn
0f03b74261
creality.ini: add 3DJAKE ecoPLA spool weight
2020-11-29 12:47:48 +01:00
Pascal de Bruijn
f86dab9f36
creality.ini: slight end_gcode improvements
...
gcode order made more similar to prusa mini
2020-11-29 12:42:08 +01:00
rtyr
6d27b0f5d0
1.2.0-beta0
2020-11-28 10:35:59 +01:00
rtyr
4b2f9562ab
TriLAB - Added PLA, PETG profiles for 0.8 nozzle, update print materials
...
https://github.com/prusa3d/PrusaSlicer-settings/pull/110
2020-11-24 09:53:50 +01:00
rtyr
ee20331ead
1.2.0-alpha0 added filament spool weight
2020-11-21 15:42:38 +01:00
rtyr
9023f092ad
Creality 0.0.7 - updated start g-code
2020-11-21 10:24:54 +01:00
rtyr
a2e763d4ca
Bumped up creality bundle version to 0.0.7
2020-11-21 10:22:57 +01:00
Pascal de Bruijn
32345b9e75
creality.ini: make start_gcode robust for absolute_e
2020-11-18 18:40:20 +01:00
Nicolas North [norðurljósahviða]
342f0738c2
revert version bump to 0.0.4 and remove accel settings for Predator
2020-11-15 00:51:17 +01:00
Nicolas North [norðurljósahviða]
28c2277902
Equalize all accelerations to avoid filling gcode with M204 commands
2020-11-14 17:16:46 +01:00
Nicolas North [norðurljósahviða]
2558a98636
fix spurious custom setting in Anycubic Predator profile
2020-11-14 12:27:20 +01:00
rtyr
cd2b502c38
Updated Anycubic thumbnails.
2020-11-13 13:08:09 +01:00
rtyr
2df97edcf5
Updated LulzBot thumbnails.
2020-11-12 19:20:23 +01:00
rtyr
62a29237fc
Added filament profiles, adjusted temperatures, updated start g-code for some models.
2020-11-12 18:55:42 +01:00
