Commit Graph

13017 Commits

Author SHA1 Message Date
Alessandro Ranellucci
caf41f07dd Output required filament length and volume to command line and to the gcode file itself 2011-12-20 15:29:15 +01:00
Alessandro Ranellucci
627e1b32e2 Add Slic3r version to gcode comment 2011-12-20 14:20:39 +01:00
Alessandro Ranellucci
5e850557d4 Added note to self about using the skeletonization algorithm to fill small gaps 2011-12-19 13:00:42 +01:00
Alessandro Ranellucci
e2a5c2119f Bugfix: some holes were skipped 2011-12-19 12:09:14 +01:00
Alessandro Ranellucci
4af295bce3 Bugfix: very wrong infill for low density regions. #127 2011-12-19 09:55:03 +01:00
Alessandro Ranellucci
65a018f156 Move the parsing warning to the end, so that it won't block slicing 2011-12-18 13:43:31 +01:00
Alessandro Ranellucci
f20209ce01 Add spacing between adjacent surfaces to avoid mini blobs 2011-12-18 13:38:45 +01:00
Alessandro Ranellucci
e5619ee543 Bugfix: not all paths were closed correctly due to float rounding 2011-12-18 11:53:15 +01:00
Alessandro Ranellucci
47bbe18de2 Additional check to return a friendly error when binary STL is not valid 2011-12-18 10:50:55 +01:00
Alessandro Ranellucci
eca6d0b6d0 Adjust flow for solid surfaces when using concentric infill too. #120 2011-12-17 20:29:06 +01:00
Alessandro Ranellucci
6a3eeef83b Removed warnings for concentric infill. #121 2011-12-17 19:59:31 +01:00
Alessandro Ranellucci
f73febff7a Always start concentric infill from the center. #120 2011-12-17 19:56:56 +01:00
Alessandro Ranellucci
d63eabcfa5 Clip less from loops to avoid gaps 2011-12-17 19:54:35 +01:00
Alessandro Ranellucci
1e6ecd9eab Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap. 2011-12-17 19:52:34 +01:00
Alessandro Ranellucci
cd0fd80a69 Restore better perimeter/infill overlap for solid surfaces 2011-12-16 18:37:43 +01:00
Alessandro Ranellucci
8e04d763f4 Don't increase flow for overlapping purposes when bridging 2011-12-16 10:53:22 +01:00
Alessandro Ranellucci
f5eb4f03e1 Skirt can be disabled by either setting skirts to 0 or skirt-height to 0 2011-12-16 09:55:13 +01:00
Alessandro Ranellucci
172253cfd7 Always use rectilinear infill for internal-solid surfaces 2011-12-15 22:05:15 +01:00
Alessandro Ranellucci
8e06a4f6f2 Bugfix: fatal error when using concentric infill 2011-12-15 21:46:29 +01:00
Alessandro Ranellucci
e6bce05d9b Releasing 0.5.6 2011-12-15 20:39:14 +01:00
Alessandro Ranellucci
b422537cc4 Bugfix: do not die when no layers are detected at all 2011-12-15 20:36:46 +01:00
Alessandro Ranellucci
18cfc15ead Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm) 2011-12-15 20:21:34 +01:00
Alessandro Ranellucci
2e013e72e8 Bugfix: models located very far from XYZ origin were incorrectly placed on the print area 2011-12-15 19:40:32 +01:00
Alessandro Ranellucci
40d06a6e11 Erorr in last commit about automatic extrusion width. #112 2011-12-15 12:50:02 +01:00
Alessandro Ranellucci
156a1deb0a Limit automatic extrusion width to be <= 1.2 * nozzle_diameter (Triffid's way). #112 2011-12-15 09:33:42 +01:00
Alessandro Ranellucci
d346bc02cc Comments are now disabled by default, new --gcode-comments option to enable them 2011-12-14 19:49:21 +01:00
Alessandro Ranellucci
3d213069a6 Bugfix: 100% overlap between perimeter and infill. #118 2011-12-14 19:40:18 +01:00
Alessandro Ranellucci
b9d01a32e5 Merge branch 'new-math' 2011-12-14 16:12:05 +01:00
Alessandro Ranellucci
2475de0554 Fix Pronterface instructions 2011-12-14 16:10:36 +01:00
Alessandro Ranellucci
048f7ca468 Adjusted flow width for solid infills was ignored 2011-12-14 11:35:19 +01:00
Alessandro Ranellucci
4bee1a12b8 Take overlap into account for external dimensions 2011-12-14 11:21:43 +01:00
Alessandro Ranellucci
efbcbc5bbf Changed default retraction speed to 30mm/s. #115 2011-12-14 10:33:22 +01:00
Alessandro Ranellucci
ca5dfc05e7 Accept STL files with spaces at the end of vertex lines. #119 2011-12-14 10:29:08 +01:00
Alessandro Ranellucci
cf33ec0a5c Notes about integration with Pronterface 2011-12-13 21:51:07 +01:00
Alessandro Ranellucci
569e737ae1 Only connect infill edges when not doing solid surfaces 2011-12-13 17:36:03 +01:00
Alessandro Ranellucci
56691c1dea Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112 2011-12-13 17:34:31 +01:00
Alessandro Ranellucci
869cb48c1a Merge branch 'master' of github.com:alexrj/Slic3r 2011-12-12 17:35:18 +01:00
Alessandro Ranellucci
3c2b2cfef2 Bugfix: duplicate options did not work correctly for copies > 2. #113 2011-12-12 17:32:45 +01:00
Alessandro Ranellucci
344a038fea Merge pull request #114 from rtgoodwin/add_scale_output
Added scale to settings output in gcode
2011-12-11 14:22:39 -08:00
Richard Goodwin
557afcc4b1 Added scale to settings output 2011-12-11 15:32:47 -06:00
Alessandro Ranellucci
9a610395ce Move post-processing to utils/ directory 2011-12-11 10:20:53 +01:00
Alessandro Ranellucci
e99de80cd8 Merge pull request #111 from triffid/z-every-line-postprocessing-script
Z every line postprocessing script
2011-12-11 01:20:22 -08:00
Michael Moon
ca25494177 add some comments 2011-12-11 08:27:16 +11:00
Michael Moon
359d4073df add z-every-line script, first attempt 2011-12-11 08:22:14 +11:00
Alessandro Ranellucci
0ebd8eb8a9 Don't die when config has unknown options. #108 2011-12-10 10:39:07 +01:00
Alessandro Ranellucci
c957c27367 Remember last opened directory. #106 2011-12-09 14:07:50 +01:00
Alessandro Ranellucci
b92ba67272 Workaround for a WxWidgets bug that clips the overlap_ratio label on Mac 2011-12-08 22:06:53 +01:00
Alessandro Ranellucci
0a74e068a3 Merge branch 'infill-overlap' 2011-12-08 10:53:24 +01:00
Alessandro Ranellucci
d9a70ea80d Customizable overlap ratio (it defaults to 0.15 now) 2011-12-08 10:53:07 +01:00
Alessandro Ranellucci
7473d5f140 Set default infill angle to 45°. #103 2011-12-08 10:33:05 +01:00