Alessandro Ranellucci
5bd16ffed6
Allow decimal values for skirt/duplicate distances and speeds. #283
2012-03-26 15:20:59 +02:00
Alessandro Ranellucci
4d71ca3071
Enable G0 automatically for Mach3. #266
2012-03-26 12:22:12 +02:00
Alessandro Ranellucci
1a06e35687
New option to specify G-code to be used at layer change. #279
2012-03-26 12:14:15 +02:00
Alessandro Ranellucci
bf964b5273
Allow perimeters = 0. #282
2012-03-26 11:32:59 +02:00
Erkki Seppälä
0ca7577392
Added a Reslicing-function to the File menu.
2012-03-12 19:52:23 +02:00
Alessandro Ranellucci
30df2342d4
UTF-8 characters not displayed correctly on Windows
2012-03-11 19:59:09 +01:00
Alessandro Ranellucci
0f5e2e3076
Throw an error if a user wants to print a 0mm layer
2012-03-11 16:58:15 +01:00
Alessandro Ranellucci
69942d2076
Bugfix: certain values of first layer height ratio caused slicing errors
2012-03-11 16:31:39 +01:00
Alessandro Ranellucci
64892c2203
Bugfix: fatal error on some models. #255
2012-03-10 23:49:24 +01:00
Alessandro Ranellucci
0e1d89376e
Minor refactoring
2012-03-04 13:39:14 +01:00
Alessandro Ranellucci
6f9cefe001
Reduce computational complexity of make_loops() => speed boost
2012-03-04 13:32:20 +01:00
Alessandro Ranellucci
3cf5f86ce0
Avoid G92 for Mach3. #220
2012-03-04 11:49:04 +01:00
Alessandro Ranellucci
4a72c77150
Maximize fill/perimeter contact for line infill pattern
2012-03-04 11:45:45 +01:00
Alessandro Ranellucci
be9886eac3
Bugfix: fill escapes perimeters. #139
2012-03-04 11:26:11 +01:00
Alessandro Ranellucci
d0807aa807
Allow to use config options in start/end G-code
2012-03-03 23:29:08 +01:00
Alessandro Ranellucci
f2032686da
Ensure fan is turned off at start if disable_fan_first_layers > 0
2012-03-03 23:18:02 +01:00
Alessandro Ranellucci
7892a84408
Refactoring and integrations to the bed temperature handling
2012-03-03 23:14:40 +01:00
Michael Moon
35e7877437
bed temperature handling. TODO: gui elements
2012-03-03 23:08:50 +01:00
Alessandro Ranellucci
8566b4f910
Separate the Slice button a bit
2012-03-03 22:53:12 +01:00
Alessandro Ranellucci
5c79024215
Revert "Made the UI look quite a bit nicer (OS X 10.7 tested)."
...
This reverts commit 266f7799dd
2012-03-03 22:50:08 +01:00
Alessandro Ranellucci
2c16509e8a
Slowdown wasn't triggered when fan_below_layer_time was set to zero. #237
2012-03-03 22:28:44 +01:00
Alessandro Ranellucci
06c22c9db3
New --fan-always-on option. #241 #110
2012-03-03 22:21:30 +01:00
Alessandro Ranellucci
c7006fed26
Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245
2012-03-03 22:16:38 +01:00
Alessandro Ranellucci
2ff3ab1faf
Remove G0 from GUI until a firmware implements it
2012-03-03 21:37:10 +01:00
Alessandro Ranellucci
b5cba48e55
Put the relative E checkbox back in the GUI and disable M82/M83 for MakerBot
2012-03-03 21:27:33 +01:00
Alessandro Ranellucci
e8c64924db
Some GUI fixes after the recent contributions
2012-03-03 21:25:26 +01:00
Alessandro Ranellucci
6b31563b70
Merge pull request #236 from sfcgeorge/improved-ui
...
Made the UI look quite a bit nicer (OS X 10.7 tested).
2012-03-03 12:04:35 -08:00
Simon George
266f7799dd
Made the UI look quite a bit nicer (OS X 10.7 tested).
...
* Added link to website for updates
* Moved 'Slice…' button to the right as this more logically follows the
user's flow through the application
* Moved version information to the middle right under the App name (on
OS X anyway) as it is clearer what the version is referring to
* Added spacing between the buttons
* Removed colon after 'version' as this is the UI convention in about
boxes
* Changed 'Load' to 'Open' as this is the more commonly used term
* Truncated 'Configuration' to 'Config' to save space, and I believe it
is still clear what it means
* Added open and save config to File menu as this is more conventional
location
* Simplified some wording
* Rephrased the tabs to be more succinct, I believe they still make
sense
* Fixed a spelling
* Replaced '…' with proper ellipses character
2012-02-28 23:04:19 +00:00
Alessandro Ranellucci
f0e434f8c1
Fix typo in previous commit and in config options. #234
2012-02-28 22:04:48 +01:00
Alessandro Ranellucci
0520d1645b
Bugfix: retraction wasn't triggered when moving between copies. #232
2012-02-28 21:55:32 +01:00
Henrik Brix Andersen
ca49965210
Fail silently if Growl was stopped after Slic3r was started
2012-02-26 19:44:15 +01:00
Alessandro Ranellucci
9332319e10
Fail silently if Growl::GNTP fails
2012-02-26 19:29:25 +01:00
Alessandro Ranellucci
f451bb2bd0
Use XML::SAX::PurePerl instead of XML::SAX::ExpatXS for now
2012-02-26 18:17:23 +01:00
Alessandro Ranellucci
b9f30d8378
Bugfix: AMF files with no materials were not successfully parsed
2012-02-26 16:22:45 +01:00
Alessandro Ranellucci
79bc2240fb
Use first layer temperature for M109 too
2012-02-26 15:09:28 +01:00
Alessandro Ranellucci
dccd7d19a9
First layer temperature. #134
2012-02-26 14:54:38 +01:00
Alessandro Ranellucci
f1f0545209
Bugfix: --extrusion-axis didn't accept an argument
2012-02-26 11:33:58 +01:00
Alessandro Ranellucci
554534fcad
Optimization
2012-02-26 11:18:42 +01:00
Alessandro Ranellucci
be0e1a6e0b
Bugfix: fill escapes perimeters. However, we keep it disabled. #139
2012-02-25 22:41:53 +01:00
Alessandro Ranellucci
c98f6734c7
Code optimization
2012-02-25 22:18:07 +01:00
Alessandro Ranellucci
170d29a789
New --cooling option and checkbox to enable/disable fan and cooling control
2012-02-25 21:56:36 +01:00
Alessandro Ranellucci
70e69be60a
Bugfix: support material was generated under most bridges
2012-02-25 21:39:01 +01:00
Alessandro Ranellucci
1d0a852679
Cooling and fan control. #110
2012-02-25 21:01:00 +01:00
Alessandro Ranellucci
f4fde54bf3
Add extrusion multiplier to gcode comments. #222
2012-02-25 19:24:46 +01:00
Alessandro Ranellucci
9f5e48bd2c
Wrong optimization
2012-02-25 17:40:30 +01:00
Alessandro Ranellucci
959230b099
Refactoring: moved Slic3r::STL and Slic3r::AMF to Slic3r::Format::*
2012-02-25 17:35:25 +01:00
Alessandro Ranellucci
2a86932cfe
Slight code optimizations
2012-02-25 17:16:55 +01:00
Alessandro Ranellucci
848bf91244
Multithreaded support material generation
2012-02-25 16:51:08 +01:00
Alessandro Ranellucci
044053a3f7
Bugfix: medial axis was not using new Douglas-Peucker implementation
2012-02-25 16:27:33 +01:00
Alessandro Ranellucci
cc695c6c22
Support material: refactoring
2012-02-25 16:23:41 +01:00
Alessandro Ranellucci
a24ffee2aa
New polygon_is_convex() function
2012-02-25 16:14:59 +01:00
Alessandro Ranellucci
2d130061ed
Increase small holes threshold to holes having a 6.5mm radius
2012-02-25 16:14:28 +01:00
Alessandro Ranellucci
eba7c10018
Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm
2012-02-25 14:46:21 +01:00
Alessandro Ranellucci
94e673e050
Backwards compatibility for people using relative E distances on RepRap firmwares
2012-02-24 23:12:16 +01:00
Alessandro Ranellucci
79aead7c9d
Experimental hole compensation
2012-02-24 20:13:17 +01:00
Henrik Brix Andersen
f55a2b91a3
Set Wx application name.
2012-02-23 21:51:45 +01:00
Alessandro Ranellucci
c3fc6ee66b
Fix regression introduced with f2e1fe5241
2012-02-21 20:16:03 +01:00
Owen Stenseth
c539a8d9e0
Support skeining multiple files from the command line. Update the status output to include input and export filenames.
2012-02-21 09:26:54 -07:00
Alessandro Ranellucci
aa7a5d6069
Removed warning
2012-02-21 14:31:51 +01:00
Alessandro Ranellucci
f2e1fe5241
Do hole perimeters in ccw direction too
2012-02-21 14:29:58 +01:00
Alessandro Ranellucci
b6bffacb9d
Parse and write multi-material AMF files. Convert multiple STL files into a single multi-material AMF
2012-02-20 16:43:45 +01:00
Alessandro Ranellucci
aa98a9deb2
Mark the Slice... button as the default one (just cosmetics)
2012-02-20 12:52:40 +01:00
Alessandro Ranellucci
555c23069d
New --post-process option. Includes some cleaning of the STDOUT messages
2012-02-20 12:50:05 +01:00
Alessandro Ranellucci
ae35df716f
Little refactoring, new TriangleMesh->align_to_origin method
2012-02-20 11:47:21 +01:00
Alessandro Ranellucci
615bcb27dd
New --gcode-flavor option. extrusion_axis, use_relative_e_distances options hidden and implied. #158
2012-02-20 11:44:30 +01:00
Alessandro Ranellucci
23156f0abe
Fix slicing error. #180
2012-02-19 17:18:50 +01:00
Alessandro Ranellucci
27a6b3a851
Bugfix: fatal error when medial axis produced poor results. #178
2012-02-19 17:11:18 +01:00
Alessandro Ranellucci
94a2585b97
Dual extruder for support material
2012-02-19 17:02:49 +01:00
Alessandro Ranellucci
375829204f
Removed the bogus hole code which is not necessary anymore. Also fixes #160
2012-02-19 16:02:58 +01:00
Alessandro Ranellucci
776d985b26
New AMF-to-STL and STL-to-AMF converters
2012-02-19 15:45:27 +01:00
Alessandro Ranellucci
79ebb13bdb
Parse AMF
2012-02-19 15:14:54 +01:00
Alessandro Ranellucci
dba6197935
Failed to remove acceleration from GUI
2012-02-19 12:27:44 +01:00
Alessandro Ranellucci
eb2c24ecfb
Removed acceleration from the GUI (too experimental for now)
2012-02-19 12:15:58 +01:00
Alessandro Ranellucci
cf6f303256
Add checkbox for support material in the GUI
2012-02-19 12:08:08 +01:00
Alessandro Ranellucci
7b67fae686
Support material
2012-02-19 12:03:36 +01:00
Alessandro Ranellucci
e0e2023a5a
Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179
2012-02-19 10:48:58 +01:00
Alessandro Ranellucci
90c6ed3b20
Merge pull request #209 from henrikbrixandersen/master
...
Use SI units consistently.
2012-02-19 00:34:17 -08:00
Alessandro Ranellucci
4f72de3873
Check that bridge_flow_ratio > 0
2012-02-19 09:32:16 +01:00
Henrik Brix Andersen
c02c2d943c
Merge remote-tracking branch 'upstream/master'
2012-02-18 22:42:08 +01:00
Henrik Brix Andersen
c20fd8a596
Use SI units consistently.
2012-02-18 22:36:13 +01:00
Alessandro Ranellucci
a9e7204fc6
New slicing algorithm based on a topological approach rather than numeric. It should be much more robust
2012-02-18 20:36:14 +01:00
Alessandro Ranellucci
16850b63ed
Removed some useless and manifoldness warnings
2012-02-17 16:31:39 +01:00
Alessandro Ranellucci
94c1b043e3
Small fix/improvement for the vertex indexing
2012-02-17 14:58:13 +01:00
Alessandro Ranellucci
f814ccf062
Refactoring: use indexed vertices
2012-02-17 13:56:17 +01:00
Henrik Brix Andersen
80bd434e5e
Remove last remains of close-after-slicing option.
2012-02-16 22:52:57 +01:00
Alessandro Ranellucci
660eedfa5b
Added a couple unit tests
2012-02-15 12:04:10 +01:00
Alessandro Ranellucci
68f001a7de
Mark acceleration settings as experimental and add a M501 command at the end of the print if acceleration control is enabled
2012-02-14 21:57:53 +01:00
Alessandro Ranellucci
0deee20ade
Bugfix: bad syntax in last commit. #202
2012-02-13 18:02:54 +01:00
Alessandro Ranellucci
dbb40095b7
Bugfix: fatal error when offsetting a surface results in more than one expolygon. #201
2012-02-12 23:44:24 +01:00
Alessandro Ranellucci
ca704c4846
Merge pull request #200 from jreinhardt/master
...
Small GUI fix
2012-02-12 14:35:03 -08:00
Alessandro Ranellucci
419b94e587
Allow Unicode characters in config.ini. #199
2012-02-12 23:33:39 +01:00
Johannes Reinhardt
2b979fb14c
added missing units in GUI
2012-02-12 22:42:03 +01:00
Alessandro Ranellucci
74c71b4ef2
Acceleration control. #185
2012-02-10 14:53:44 +01:00
Alessandro Ranellucci
ad8c9d4ea1
Bugfix: model with rounded walls had small useless infill regions. #177
2012-02-10 14:42:54 +01:00
Alessandro Ranellucci
7893480fd7
Add checkbox for G0 in the GUI. #51
2012-02-06 21:17:01 +01:00
Alessandro Ranellucci
ddb0330fc1
Validate configuration before saving from GUI
2012-02-06 16:52:11 +01:00
Henrik Brix Andersen
121895d3fc
Add support for notes field in configuration profiles. #130
2012-02-05 20:55:17 +01:00
Henrik Brix Andersen
4dd33c6b05
Ask for confirmation when slicing more than one copy. #165
2012-02-05 16:43:44 +01:00
Henrik Brix Andersen
cc040df42a
Do not display the progress dialog as an application-wide modal dialog; modal to the parent window is enough. #189
2012-02-05 14:23:15 +01:00
Henrik Brix Andersen
cec660c263
Fallback on last used config path if no last skein path is set and vice versa.
2012-02-03 20:22:45 +01:00
Henrik Brix Andersen
b4dc299be0
Use separate variables for last used config directory and last used skein directory. #187
2012-02-03 19:57:49 +01:00
Henrik Brix Andersen
35be7f013b
Add Growl support. #62
2012-02-03 00:30:35 +01:00
Alessandro Ranellucci
3e65af7457
Revert "New First layer flow ratio option. #182 "
...
This reverts commit 99ef0865bb
2012-01-30 14:51:05 +01:00
Alessandro Ranellucci
99ef0865bb
New First layer flow ratio option. #182
2012-01-30 14:25:14 +01:00
Alessandro Ranellucci
eb33c03926
Bugfix: flow wasn't adjusted for first layer according to its height setting. #182
2012-01-30 14:03:12 +01:00
Alessandro Ranellucci
4a9672bd88
Use about 40% less memory
2012-01-28 21:52:31 +01:00
Alessandro Ranellucci
c7b650b001
Require Math::Clipper 1.03 for thread-safety
2012-01-28 16:47:03 +01:00
Alessandro Ranellucci
8b777e9d70
Multithreaded infill. #154
2012-01-28 16:27:52 +01:00
Alessandro Ranellucci
669341cd11
New utility script to split STL plates into individual STL files
2012-01-28 15:05:42 +01:00
Alessandro Ranellucci
2151457d9e
Bugfix: small perimeter speed was applied to all holes too, regardless of their size. #175
2012-01-27 14:43:12 +01:00
Alessandro Ranellucci
4ade11b26e
Some minor fixes related to polyline refactoring
2012-01-27 14:29:06 +01:00
Alessandro Ranellucci
5bc3f2cfa5
Allow portability of config files between Unix and Windows
2012-01-22 20:10:23 +01:00
Alessandro Ranellucci
debdd164e2
Bugfix: fatal error and warnings removed when cleaning some dirty layers
2012-01-21 18:44:24 +01:00
Alessandro Ranellucci
00c6287488
Bugfix: fill escapes perimeters. #139
2012-01-21 17:11:14 +01:00
Alessandro Ranellucci
a4194554c9
Write single wall width (extrusion width) to the G-code file
2012-01-21 17:02:55 +01:00
Alessandro Ranellucci
331ede52b8
Do all shells for a hole before moving onto the next one. #88
2012-01-21 16:35:33 +01:00
Alessandro Ranellucci
63972a3a35
Some more overlap
2012-01-21 16:35:23 +01:00
Alessandro Ranellucci
7636b67871
Fix comments in Perimeter.pm
2012-01-21 12:00:12 +01:00
Alessandro Ranellucci
f1b1454b36
Loops were not closing well
2012-01-21 11:51:31 +01:00
Alessandro Ranellucci
0e23f20df1
Poor overlap between perimeters and infill
2012-01-21 11:48:03 +01:00
Alessandro Ranellucci
a0ebee2ca3
Warn if no layers were detected
2012-01-21 11:34:03 +01:00
Alessandro Ranellucci
c5b6787a19
Print the number of bogus holes to debug output
2012-01-21 11:24:26 +01:00
Alessandro Ranellucci
92cdaf2f2d
Retract at end of print
2012-01-20 14:48:51 +01:00
Alessandro Ranellucci
d1ad02cc71
Removed one more fatal error caused by recent refactoring
2012-01-18 19:28:49 +01:00
Alessandro Ranellucci
bba91fc0a5
Some better debug messages and a note about self-intersecting polygons. #160
2012-01-18 18:59:34 +01:00
Alessandro Ranellucci
478775ef1c
Add checkbox to GUI to enable G-code comments
2012-01-18 10:46:39 +01:00
Alessandro Ranellucci
f419cf37d1
Use solid print speed for internal solid layers too. #167
2012-01-18 10:07:42 +01:00
Alessandro Ranellucci
59cd027a68
Temporarily disable small gap filling as it requires a fix not to slow down everything
2012-01-13 18:24:08 +01:00
Alessandro Ranellucci
90d10b24a8
Fill gaps using medial axis detection
2012-01-12 22:05:35 +01:00
Alessandro Ranellucci
a3a9cf5749
Yet other things not changed when refactored. #163
2012-01-12 10:48:18 +01:00
Alessandro Ranellucci
b605381132
Bugfix: more errors in infills after refactoring. #162
2012-01-11 23:19:56 +01:00
Alessandro Ranellucci
8735ac3c57
Bridges now have higher priority than other solid surfaces. #140
2012-01-11 23:16:09 +01:00
Alessandro Ranellucci
5fefcc0dc4
More fixes after refactoring
2012-01-11 23:14:59 +01:00
Alessandro Ranellucci
468f09d3c1
Bugfix: small surfaces where still infilled even with fill_density = 0
2012-01-11 22:38:06 +01:00
Alessandro Ranellucci
0184b0f205
Fixed many little things that were not updated along with recent large refactoring. #157 #144
2012-01-11 20:13:26 +01:00
Alessandro Ranellucci
8ed91a8ec4
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
2011-12-30 19:59:51 +01:00
Alessandro Ranellucci
2def6a9787
Bugfix: medial axis code threw fatal errors sometimes
2011-12-30 18:58:27 +01:00
Alessandro Ranellucci
4b2bd7f779
Bugfix: wrong month number in output
2011-12-30 18:57:58 +01:00
Alessandro Ranellucci
f08ebe97b2
Bugfix: fatal error for some models and thin walls not considered for skirt
2011-12-30 18:51:48 +01:00
Alessandro Ranellucci
1c7564e4a4
Thin walls. #24
2011-12-30 17:17:37 +01:00
Alessandro Ranellucci
62ee79f0c9
Remember last config file path when loaded from CLI too
2011-12-26 19:45:01 +01:00
Alessandro Ranellucci
d6dcb35237
Remember the filename and path of the last config file loaded, to use as default for saving
2011-12-26 19:06:57 +01:00
Alessandro Ranellucci
f9446b9c6e
Cleanup the --output-filename-format implementation. #53 #137
2011-12-26 17:25:13 +01:00
Clarence Risher
1071b556cb
second draft implementation of output_filename_format
2011-12-26 04:20:45 -05:00
Alessandro Ranellucci
342823fdf3
Bugfix: fatal error in arc detection code. #133
2011-12-25 13:01:48 +01:00
Alessandro Ranellucci
a86bc260e7
Bugfix: some islands having ho holes and contained in holes themselves were ignored
2011-12-24 11:01:28 +01:00
Alessandro Ranellucci
ab0300bb70
Bugfix for recent solid infill adjustment math, to take float math into account
2011-12-22 18:55:18 +01:00
Alessandro Ranellucci
75cbe879b7
New "Slice and save as..." command to specify output filename. #53
2011-12-22 17:38:37 +01:00
Alessandro Ranellucci
1cc28844a5
Merge pull request #131 from sparr/master
...
this fixes a bug with arc lengths as discussed on IRC, including two unit tests
2011-12-22 03:16:16 -08:00
Clarence Risher
a81e8c4afc
correct length calculation for clockwise arcs
2011-12-22 06:10:54 -05:00
Alessandro Ranellucci
55045e0437
Limit skirt height to the print height. #128
2011-12-22 11:57:26 +01:00
Alessandro Ranellucci
98a8c64ed7
Extended (and fixed) unit testing to track down (and fix) an issue caused by floating point math that reversed some holes into contours when they should actually be ignored
2011-12-22 11:24:46 +01:00
Alessandro Ranellucci
fbea5dae8f
Bugfix: consider holes when searching for supporting surfaces
2011-12-20 22:37:59 +01:00
Alessandro Ranellucci
caf41f07dd
Output required filament length and volume to command line and to the gcode file itself
2011-12-20 15:29:15 +01:00
Alessandro Ranellucci
627e1b32e2
Add Slic3r version to gcode comment
2011-12-20 14:20:39 +01:00
Alessandro Ranellucci
5e850557d4
Added note to self about using the skeletonization algorithm to fill small gaps
2011-12-19 13:00:42 +01:00
Alessandro Ranellucci
e2a5c2119f
Bugfix: some holes were skipped
2011-12-19 12:09:14 +01:00
Alessandro Ranellucci
4af295bce3
Bugfix: very wrong infill for low density regions. #127
2011-12-19 09:55:03 +01:00
Alessandro Ranellucci
65a018f156
Move the parsing warning to the end, so that it won't block slicing
2011-12-18 13:43:31 +01:00
Alessandro Ranellucci
f20209ce01
Add spacing between adjacent surfaces to avoid mini blobs
2011-12-18 13:38:45 +01:00
Alessandro Ranellucci
e5619ee543
Bugfix: not all paths were closed correctly due to float rounding
2011-12-18 11:53:15 +01:00
Alessandro Ranellucci
47bbe18de2
Additional check to return a friendly error when binary STL is not valid
2011-12-18 10:50:55 +01:00
Alessandro Ranellucci
eca6d0b6d0
Adjust flow for solid surfaces when using concentric infill too. #120
2011-12-17 20:29:06 +01:00
Alessandro Ranellucci
6a3eeef83b
Removed warnings for concentric infill. #121
2011-12-17 19:59:31 +01:00
Alessandro Ranellucci
f73febff7a
Always start concentric infill from the center. #120
2011-12-17 19:56:56 +01:00
Alessandro Ranellucci
d63eabcfa5
Clip less from loops to avoid gaps
2011-12-17 19:54:35 +01:00
Alessandro Ranellucci
1e6ecd9eab
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
2011-12-17 19:52:34 +01:00
Alessandro Ranellucci
cd0fd80a69
Restore better perimeter/infill overlap for solid surfaces
2011-12-16 18:37:43 +01:00
Alessandro Ranellucci
8e04d763f4
Don't increase flow for overlapping purposes when bridging
2011-12-16 10:53:22 +01:00
Alessandro Ranellucci
f5eb4f03e1
Skirt can be disabled by either setting skirts to 0 or skirt-height to 0
2011-12-16 09:55:13 +01:00
Alessandro Ranellucci
172253cfd7
Always use rectilinear infill for internal-solid surfaces
2011-12-15 22:05:15 +01:00
Alessandro Ranellucci
8e06a4f6f2
Bugfix: fatal error when using concentric infill
2011-12-15 21:46:29 +01:00
Alessandro Ranellucci
b422537cc4
Bugfix: do not die when no layers are detected at all
2011-12-15 20:36:46 +01:00
Alessandro Ranellucci
18cfc15ead
Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm)
2011-12-15 20:21:34 +01:00
Alessandro Ranellucci
2e013e72e8
Bugfix: models located very far from XYZ origin were incorrectly placed on the print area
2011-12-15 19:40:32 +01:00
Alessandro Ranellucci
40d06a6e11
Erorr in last commit about automatic extrusion width. #112
2011-12-15 12:50:02 +01:00
Alessandro Ranellucci
156a1deb0a
Limit automatic extrusion width to be <= 1.2 * nozzle_diameter (Triffid's way). #112
2011-12-15 09:33:42 +01:00
Alessandro Ranellucci
d346bc02cc
Comments are now disabled by default, new --gcode-comments option to enable them
2011-12-14 19:49:21 +01:00
Alessandro Ranellucci
3d213069a6
Bugfix: 100% overlap between perimeter and infill. #118
2011-12-14 19:40:18 +01:00
Alessandro Ranellucci
b9d01a32e5
Merge branch 'new-math'
2011-12-14 16:12:05 +01:00
Alessandro Ranellucci
048f7ca468
Adjusted flow width for solid infills was ignored
2011-12-14 11:35:19 +01:00
Alessandro Ranellucci
4bee1a12b8
Take overlap into account for external dimensions
2011-12-14 11:21:43 +01:00
Alessandro Ranellucci
ca5dfc05e7
Accept STL files with spaces at the end of vertex lines. #119
2011-12-14 10:29:08 +01:00
Alessandro Ranellucci
569e737ae1
Only connect infill edges when not doing solid surfaces
2011-12-13 17:36:03 +01:00
Alessandro Ranellucci
56691c1dea
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
2011-12-13 17:34:31 +01:00
Alessandro Ranellucci
869cb48c1a
Merge branch 'master' of github.com:alexrj/Slic3r
2011-12-12 17:35:18 +01:00
Alessandro Ranellucci
3c2b2cfef2
Bugfix: duplicate options did not work correctly for copies > 2. #113
2011-12-12 17:32:45 +01:00
Richard Goodwin
557afcc4b1
Added scale to settings output
2011-12-11 15:32:47 -06:00
Alessandro Ranellucci
0ebd8eb8a9
Don't die when config has unknown options. #108
2011-12-10 10:39:07 +01:00
Alessandro Ranellucci
c957c27367
Remember last opened directory. #106
2011-12-09 14:07:50 +01:00
Alessandro Ranellucci
b92ba67272
Workaround for a WxWidgets bug that clips the overlap_ratio label on Mac
2011-12-08 22:06:53 +01:00
Alessandro Ranellucci
0a74e068a3
Merge branch 'infill-overlap'
2011-12-08 10:53:24 +01:00
Alessandro Ranellucci
d9a70ea80d
Customizable overlap ratio (it defaults to 0.15 now)
2011-12-08 10:53:07 +01:00
Alessandro Ranellucci
d813aea59a
Don't slow down retractions on bottom layer. #101
2011-12-08 10:28:23 +01:00
Alessandro Ranellucci
1f64a01ed4
Remove empty layers from bottom. They could be caused by little contact with the print bed, resulting in the need of thin walls. While thin walls will be supported one day, it's still not optimal to have so little contact on bottom layer(s), so we remove such layers. #96
2011-12-08 10:25:19 +01:00
Alessandro Ranellucci
99c1facec6
Bugfix: division by zero when nothing in a single layer could be parsed. #100
2011-12-07 20:18:12 +01:00
Alessandro Ranellucci
525855dc7d
Bugfix: fatal error when combining infills. #96
2011-12-07 20:15:08 +01:00
Richard Goodwin
3ced3ee91f
Fixed bolding and font issues on Windows
2011-12-06 15:36:42 -06:00
Alessandro Ranellucci
313f77ee59
Bugfix: removed error when filling small regions
2011-12-05 19:54:19 +01:00
Alessandro Ranellucci
2ba513bdb2
Bugfix: after recent changes, objects had slight dimension errors. #56
2011-12-05 18:48:48 +01:00
Alessandro Ranellucci
3d0cde2fce
Fixed regression. The repair algorithm was not working after recent changes. Releasing 0.5.5b. #16 #28
2011-12-05 13:01:02 +01:00
Alessandro Ranellucci
b8a5d5a208
Bugfix: fatal error on many models. Releasing 0.5.5a. #92 #93
2011-12-05 12:15:52 +01:00
Alessandro Ranellucci
53bc9c7421
Customizable speed for small perimeters. #60
2011-12-04 20:50:03 +01:00
Alessandro Ranellucci
ea254588f7
More tolerance for config files
2011-12-04 20:41:17 +01:00
Alessandro Ranellucci
28a89c70c9
New bridge flow rate multiplier option. #85
2011-12-04 20:29:21 +01:00
Alessandro Ranellucci
3ac9dd513b
Add first layer height ratio option to the GUI
2011-12-04 19:17:42 +01:00
Alessandro Ranellucci
b79ae44e3d
Recent changes made Slic3r less tolerant with dirty STL files. Now we are able again to slice Prusa parts. #16
2011-12-04 19:10:43 +01:00
Alessandro Ranellucci
eb64cc4965
More fixes for bridges. #58
2011-12-04 18:37:37 +01:00
Alessandro Ranellucci
d056535bd8
Further corrections to the bridge angle detection algorithm. #58
2011-12-04 17:19:03 +01:00
Alessandro Ranellucci
0aff5fab24
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
2011-12-04 16:24:46 +01:00
Alessandro Ranellucci
4fe340cc56
Many fixes to the bridge direction detection algorithm and other things. #58
2011-12-03 18:31:31 +01:00
Alessandro Ranellucci
792960aae1
Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58
2011-12-02 23:35:39 +01:00
Alessandro Ranellucci
5375f5fef4
Mark important settings in bold
2011-12-02 17:02:36 +01:00
Alessandro Ranellucci
52c9897eda
New --extrusion-axis option; removed --no-extrusion
2011-12-01 22:34:21 +01:00
Alessandro Ranellucci
830965fc0b
Note used settings in exported gcode. #52
2011-12-01 22:20:48 +01:00
Alessandro Ranellucci
aab85a4e27
Bugfix: unable to read back config file if start or end gcode was empty. #84
2011-12-01 22:06:07 +01:00
Alessandro Ranellucci
e99c9f9e5f
Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77
2011-12-01 22:04:23 +01:00
Alessandro Ranellucci
2a02d26ca5
Fixed regression: fill density = 0 was preventing extra solid layers. #75
2011-12-01 21:15:02 +01:00
Alessandro Ranellucci
f7a9c9be63
Bugfix: sometimes holes were detected as contours
2011-12-01 20:57:38 +01:00
Alessandro Ranellucci
133f3a0495
Bugfix: Clipper error occurred under certain circumstances
2011-12-01 19:40:45 +01:00
Alessandro Ranellucci
b03afc7f1c
Bugfix: some bridges were not detected correctly. #57
2011-11-30 20:32:28 +01:00
Alessandro Ranellucci
52270d6b95
Bugfix: extrusion width ratio gave wrong flow rate under certain circumstances. #80
2011-11-30 18:18:17 +01:00
Alessandro Ranellucci
71c359bb29
Cleaning recent changes
2011-11-30 17:48:00 +01:00
Alessandro Ranellucci
42383dec84
Warn about models with overlapping or intersecting facets but try to repair wrong layers. #16
2011-11-30 16:28:09 +01:00
Alessandro Ranellucci
d51a37a0ae
Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16
2011-11-30 16:07:31 +01:00
Michael Moon
729905d342
allow solid fill layers to be zero
2011-11-30 12:51:34 +11:00
Alessandro Ranellucci
2970e31540
Bugfix: some bridges being very close could lead to overlapping infill
2011-11-29 11:36:52 +01:00
Alessandro Ranellucci
d168ecbb4e
Bugfix: fill density = 0 was preventing generation of extra solid layers. #75
2011-11-29 10:15:50 +01:00
Alessandro Ranellucci
248ed8589a
Bugfix: error when concentric infill. #73
2011-11-28 22:52:35 +01:00
Alessandro Ranellucci
92e86a2259
Bugfix: plate was lifted even when retracting for Z change
2011-11-28 19:59:39 +01:00
Alessandro Ranellucci
3ad9ed74ae
New --solid-infill-feed-rate option. #68
2011-11-28 19:11:26 +01:00
Alessandro Ranellucci
975387d953
New --bridge-feed-rate option. #68
2011-11-28 18:37:53 +01:00
Alessandro Ranellucci
4cdd0f6fd0
Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero.
2011-11-27 10:12:44 +01:00
Alessandro Ranellucci
22551b64de
Bugfix: a recent change broke all options having a zero value
2011-11-26 22:43:12 +01:00
Alessandro Ranellucci
7a5af293a8
Mark slow infill patterns as slow. #20
2011-11-26 22:41:23 +01:00
Alessandro Ranellucci
8ce2c23e52
Bugfix: hard errors when extrusion width was left empty.
2011-11-26 20:51:04 +01:00
Alessandro Ranellucci
8e7d00bb34
Avoid unnecessary retractions during infill. #29
2011-11-26 17:01:00 +01:00
Alessandro Ranellucci
72d7e1a5de
Don't update progress bar with wxWidgets 2.9.0 and 2.9.1
2011-11-26 16:52:10 +01:00
Alessandro Ranellucci
bed502af3c
Make the progress bar determinate and output status description. #31
2011-11-26 16:19:30 +01:00
Alessandro Ranellucci
951778439a
Bugfix: recent changes broke the "infill every layers" option which didn't alternate infill direction correctly. #70
2011-11-26 15:21:15 +01:00
Alessandro Ranellucci
afd8e0a1bd
Bugfix: setting temperature to zero didn't remove it from output
2011-11-26 15:11:11 +01:00
Alessandro Ranellucci
0ab1fd4c19
concentric - new superfast infill pattern
2011-11-26 10:38:45 +01:00
Alessandro Ranellucci
f3b689d4e0
Bugfix: infill every 'n' layers was broken after recent changes
2011-11-25 18:16:31 +01:00
Alessandro Ranellucci
25c85aada5
Renamed "filament packing density" to "extrusion multiplier". Same values. #4
2011-11-25 11:15:20 +01:00
Alessandro Ranellucci
3c0ea0b57f
New --extrusion-width-ratio option. #8
2011-11-25 11:10:35 +01:00
Alessandro Ranellucci
47d347e1b2
Revert "Disable retraction when moving over infill space. #29 "
...
This reverts commit d6ed9c6f34
2011-11-24 12:53:09 +01:00
Alessandro Ranellucci
8598b66b0a
Large refactoring. Cleaner logic, smaller memory footprint.
2011-11-23 12:29:27 +01:00
Alessandro Ranellucci
13ef24b5eb
Fixes, improvements and refactoring for bridges and solid surfaces.
2011-11-23 09:49:39 +01:00
Alessandro Ranellucci
d13a0e2503
Bugfix: no top surfaces when they were too close to bridges
2011-11-22 21:45:05 +01:00
Alessandro Ranellucci
048410ac52
Bugfix: some infill lines extruded outside objects when using 45° infill angle. #65
2011-11-22 20:35:05 +01:00
