3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
14,833 Commits 1 Branch 1 Tag 249 MiB
ce32d68368
Commit Graph

2761 Commits

Author SHA1 Message Date
enricoturri1966
ce32d68368 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-12-17 11:41:54 +01:00
enricoturri1966
b8fc1d3173 GCodeViewer - Fixed visualization of time estimates for silent mode 2020-12-17 11:41:41 +01:00
Vojtech Bubnik
ba9a9b4e7a Fixed buffer overflow in the OBJ parser. 
Improved error reporting on OBJ parser.
 2020-12-17 09:53:21 +01:00
Vojtech Bubnik
7df9f3e422 Improvements of OBJ parser robustness. 2020-12-17 09:17:07 +01:00
Vojtech Bubnik
4d459f37de Merge branch 'lm_230beta3_fixes' 2020-12-16 13:51:09 +01:00
Lukáš Hejl
80251e0cf9 Fixed of unintentional disabling of wipe even in cases when avoid crossing perimeters weren't applied due to exceeding the maximum detour length. 2020-12-16 13:17:09 +01:00
Vojtech Bubnik
2f71af1ee4 Saving "converted from inches" to 3MF and AMF even if the file source 
information is empty.
 2020-12-16 12:05:29 +01:00
YuSanka
f37b9c4d51 Set limits to the "extrusion_multiplier" value and show warning message, if out of range value was inputted 2020-12-15 21:21:09 +01:00
enricoturri1966
9704eb6ece Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-12-15 15:57:32 +01:00
enricoturri1966
dcd69b4ef8 #5415 - Fixed preview when volumetric extrusion is turned on 2020-12-15 15:57:22 +01:00
Lukáš Hejl
d59f345fbb Fix of #5443 - Assigned input file path for ModelVolume also for AMF archives 2020-12-15 14:18:11 +01:00
Lukáš Hejl
e62f014049 Corrected side text for avoid crossing perimeters max detour 2020-12-15 14:03:52 +01:00
Lukáš Hejl
161fb86c43 Fixed percentages in avoid crossing perimeters max detour 2020-12-15 13:49:35 +01:00
YuSanka
43581059ff Fix of #5450 - Wrong printer preset after loading 3mf project file when having multiple presets for one physical printer 2020-12-15 12:11:20 +01:00
Lukáš Hejl
0ca337ac7a Apply avoid crossing perimeters also for supports. 2020-12-15 06:46:44 +01:00
Lukas Matena
5553762d9c Do not remove custom supports/seams when converting units to imperial 2020-12-14 20:27:19 +01:00
Lukas Matena
a5d363a9f4 Do not emit M1 gcode for firmwares other than Marlin (after MM priming) 
The M1 gcode is apparently only supported on Marlin, others do not support it or use it for something else
This should fix #5441
 2020-12-14 20:27:19 +01:00
Vojtěch Bubník
cbb306c86a
Merge pull request #5466 from wavexx/include_atomic 
Include <atomic> for std::atomic where needed
 2020-12-14 18:29:13 +01:00
Vojtech Bubnik
7b9f2093bb Configuration layer: Support for vectors of FloatsOrPercents and 
FloatsOrPercentsNullable, to support further filament overrides
of Print preset values, namely Avoid Crossing Perimeters.
 2020-12-14 15:58:47 +01:00
enricoturri1966
cdb05d103a Tweaked clamping of max toolpaths width 2020-12-14 15:11:38 +01:00
enricoturri1966
9605e235b8 #5378 - Do not apply machine limits for non-Marlin firmwares 2020-12-14 14:02:50 +01:00
Vojtech Bubnik
12303d93d5 Fixed previous merge 2020-12-14 12:49:16 +01:00
Vojtech Bubnik
e90120994e Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2020-12-14 12:47:59 +01:00
Vojtech Bubnik
b5f95dd4b4 Avoid crossing perimeters max detour could newly be specified 
in percentage of the direct path.
 2020-12-14 12:45:49 +01:00
Vojtech Bubnik
530148575b Avoid crossing perimeters max detour could newly be specified 
in percentage of the direct path.
 2020-12-14 12:36:55 +01:00
Yuri D'Elia
44f71f0ed1 Include <atomic> for std::atomic where needed 
Fixes build on linux using clang 11
 2020-12-13 19:41:47 +01:00
Vojtech Bubnik
9fdf8c8b8d Fixed retrieving of the "saved in inches" flag from 3MF. 
Fixed "import STL from Inches" - it should always scale up even if the
object is bigger than 3x3x3mm.
 2020-12-12 18:54:34 +01:00
Vojtech Bubnik
5605088aad Follow-up on aaaa85c1f8 
Fix of #5007 - "Reload from disk" causes objects converted to inches to revert to mm
1) Storing and reloading the "source_in_inches" source flag from AMF and 3MF
2) When converting objects with mixed "inches" volumes, do the right thing
   and do not convert those that do not need conversion.
 2020-12-12 12:06:15 +01:00
Lukas Matena
d267a9a105 Fixed a typo in a tooltip 2020-12-12 09:15:01 +01:00
Vojtech Bubnik
621610da75 Follow up on 569200eb99 
Improved formatting of the vector of dimensions, improved wordings
of error messages and tooltips.
 2020-12-12 08:34:43 +01:00
Vojtech Bubnik
7de0f46db4 Merge of Fix support doesn't ignore overhangs bridge anymore #5164 2020-12-11 15:14:16 +01:00
enricoturri1966
5a7e4ff47c Faster toolpaths refresh when changing options selection in preview 2020-12-11 14:59:58 +01:00
YuSanka
aaaa85c1f8 Fix of #5007 - "Reload from disk" causes objects converted to inches to revert to mm 2020-12-11 13:57:58 +01:00
Vojtech Bubnik
a2959ec944 Fix of re-slicing with multiple regions. 
This is a fix of a bug, which was in Slic3r forever, where raw slices
were not cached, but recalculated from classified regions, where
merging the regions did not produce the original contour reliably.
Fixes [2.3.0-beta2] Odd bad slicing related to infill (?) percentage #5407
 2020-12-11 12:21:07 +01:00
Vojtech Bubnik
bd79036d13 Replaced all "long long" types with int64_t 
Replaced all "unsigned long long" types with uint64_t.
These "new" types better communicate their meaning and they are
guaranteed to behave the same on all platforms & compilers.
 2020-12-10 08:40:15 +01:00
Vojtech Bubnik
06df87da35 Fix of 298b730589 
(linear tapering of extrusion rate for the 1st spiral vase layer)
Linear tapering could only be implemented for relative extruder distances.
For absolute extruder distances, all the G1 Exxx in all spiral vase layers
would have to be adjusted, which is much more complex and risky to do now
before release.
 2020-12-09 16:52:41 +01:00
Vojtech Bubnik
fb7098e542 Sequential Mode: Improved error message to explain that the spiral mode 
may be enabled for multiple objects in sequential mode.
Fixes Allow for multiple objects while Spiral Vase mode is on #2500
 2020-12-09 15:40:21 +01:00
Vojtech Bubnik
13b968186e fix of unit tests 2020-12-09 15:12:17 +01:00
Vojtech Bubnik
298b730589 Implemented linear tapering of extrusion rate for the 1st spiral vase layer 
above the solid infill. Should fix
first layer of vase (after bottom layers) is bulging (0.6nozzle, 0.4 layerhight) #3712
Adjust flow of the "second" layer in spiral vase mode #2795
 2020-12-09 14:54:26 +01:00
Vojtech Bubnik
364300055e Fix of spiral vase mode with holes in the bottom: Holes in the bottom layers 
(non-spiral vase layers) were being closed.
Fixes Bad slicing in vase mode (unexpected bridge and solid infill layers) #3326
Fixes Model with holes in the base does not slice properly in "Vase Mode" #5359
 2020-12-09 14:54:26 +01:00
YuSanka
9892394eb0 Fix for "Import config bundle with physical printers" (#5393) 2020-12-09 12:46:26 +01:00
Vojtech Bubnik
4af3819c85 Fixing the unit tests of PlaceholderParser. 2020-12-09 11:02:31 +01:00
Vojtech Bubnik
562c0bd563 Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2020-12-09 09:27:03 +01:00
Vojtech Bubnik
7353d8c6e9 Rework of Add random function for gcode macros. #5219 after merge: 
The thread local storage variables for the random number generator
were replaced by an external context variable.
Thread local storage is a scarce resource.
 2020-12-09 09:19:46 +01:00
Vojtech Bubnik
1e190affcf Merge branch 'pa_macro_random_support' of https://github.com/ardenpm/PrusaSlicer into ardenpm-pa_macro_random_support 2020-12-09 07:33:41 +01:00
Lukáš Hejl
bb2eecb42c Fix of #4060 - Add check for the case that all ranges of a volume do not contain any Z. 2020-12-09 07:28:18 +01:00
Lukáš Hejl
0ad135ff93 Fix of #4732 - In spiral vase mode, use the number of layers instead of the value of bottom solid layers if a printed object has a smaller number of layers than the value of bottom solid layers. 2020-12-09 07:21:14 +01:00
Lukáš Hejl
4c35250531 Fix of #5004 - Disable retract on layer change also for filament overrides. 2020-12-09 07:16:01 +01:00
Vojtech Bubnik
2d6b694261 Fix of Place on face: 
1) Decreased "gimbal lock" epsilon 10x
2) Got rid of unnecessary back and forth conversions which led to numerical inacurracies

This should fix issues #5172, #5011 and #5398
 2020-12-09 06:20:41 +01:00
Vojtech Bubnik
6e3fae3865 Fix of #5319 - presets inherited from renamed presets using the old 
preset name in the "inherits" field were losing the "inherits" flag.
 2020-12-08 17:45:59 +01:00