Alessandro Ranellucci
d0bee4bf41
Fixed regression in Split. #766
2012-10-27 21:39:57 +02:00
Alessandro Ranellucci
bc9ff848dd
Removed unused 'propgrid' import group from Wx. #764
2012-10-27 21:21:18 +02:00
Alessandro Ranellucci
f9e20db156
Update t/dynamic.t
2012-10-27 21:20:32 +02:00
Alessandro Ranellucci
b0f24a2666
Bugfix: unnecessary tool changes were generated when using the same tool for subsequent parts
2012-10-25 18:49:59 +02:00
Alessandro Ranellucci
667d88603e
Reorder some options using the more compact layout
2012-10-25 12:37:02 +02:00
Alessandro Ranellucci
cee3864fc9
Independently set number of top/bottom solid layers. #676
2012-10-25 12:21:04 +02:00
Alessandro Ranellucci
bbd7765f40
Refactored the options group building to allow for more flexible layouts
2012-10-25 11:24:56 +02:00
Alessandro Ranellucci
31c2e50fc6
Bugfix: bed temperature wasn't being set after the first layer when first layer bed temperature was set to zero. #760
2012-10-24 22:57:19 +02:00
Alessandro Ranellucci
50f6909475
Don't apply slowdown factor to bridges. #640
2012-10-24 22:55:03 +02:00
Alessandro Ranellucci
392af5542b
Show object information when double-clicking it in the plater
2012-10-24 22:44:08 +02:00
Alessandro Ranellucci
304676b6aa
Use XML::SAX::ExpatXS if available
2012-10-24 20:36:32 +02:00
Alessandro Ranellucci
3c8ac435ad
Remember last used filament presets when using multiple extruders too
2012-10-24 20:24:11 +02:00
Alessandro Ranellucci
355031fe2f
Remove unnecessary retractions
2012-10-24 19:38:18 +02:00
Alessandro Ranellucci
44016b38c5
Distribute skirt loops across all extruders
2012-10-24 19:13:40 +02:00
Alessandro Ranellucci
f0d2b0e5ea
Avoid overlapping regions (thanks Mike Sheldrake!). #726
2012-10-24 16:46:40 +02:00
Alessandro Ranellucci
1c50c8a401
Merge branch 'dynamic-flow'
2012-10-24 16:19:13 +02:00
Alessandro Ranellucci
6beaf5e597
New faster algorithm for filling gaps, while we work on a new medial axis implementation
2012-10-24 16:17:09 +02:00
Alessandro Ranellucci
1445820673
External perimeter first on bottom layer when brim is enabled. #761
2012-10-24 12:04:44 +02:00
Alessandro Ranellucci
19e77a28a1
Merge branch 'master' into dynamic-flow
2012-10-24 10:55:57 +02:00
Alessandro Ranellucci
28b56ae840
Force unfocusing of all input fields when saving a preset, otherwise the currently focused one might be ignored. #750 #624
2012-10-22 16:03:08 +02:00
Alessandro Ranellucci
c793a2657f
Replace Math::ConvexHull with Math::ConvexHull::MonotoneChain. #722
2012-10-22 15:29:54 +02:00
Alessandro Ranellucci
68c3a0dd61
Make arcs.t happy. #721
2012-10-22 14:08:27 +02:00
Alessandro Ranellucci
33b1970b95
Incomplete commit broke the plater on threaded perls
2012-10-22 14:02:58 +02:00
Alessandro Ranellucci
0990a9418c
Bugfix: honeycomb infill was overlapping too much with perimeters. #732
2012-10-22 13:38:37 +02:00
Alessandro Ranellucci
3c7785aaf3
Useless extra perimeters were generated sometimes. #444 #732
2012-10-22 13:21:11 +02:00
Alessandro Ranellucci
76f75db055
Always specify tool number in M104/M109 when printing with multiple extruders
2012-10-21 21:44:06 +02:00
Alessandro Ranellucci
4f1b56f004
Fix regression causing the plater to merge all materials into a single one, thus not producing multi-extrusion prints
2012-10-21 20:56:19 +02:00
Alessandro Ranellucci
f5f9574173
Merge pull request #722 from mesheldrake/remove-dups-before-hull
...
use remove_coinciding_points before convex_hull
2012-10-15 02:49:30 -07:00
Alessandro Ranellucci
149d9e737b
Merge pull request #721 from mesheldrake/parallel-degrees-limit
...
parallel_degrees_limit decreased, 3 to 0.1, #704
2012-10-15 02:48:16 -07:00
Alessandro Ranellucci
50161497f3
Merge pull request #720 from mesheldrake/increase-offset-scale
...
Increase scale factor for Clipper::offset
2012-10-15 02:47:16 -07:00
Alessandro Ranellucci
6b4f038d17
Update copies number when decreasing parts. #747
2012-10-15 10:59:54 +02:00
Alessandro Ranellucci
769134bb6f
Fixed regression causing skirt ignoring the first layer extrusion width override. #728
2012-10-15 10:57:15 +02:00
Alessandro Ranellucci
8ac367bfa7
If brim overlaps with skirt, make brim around skirt too instead of just ignoring skirt on first layer
2012-10-14 22:10:49 +02:00
Alessandro Ranellucci
b92642459f
Merge branch 'master' into dynamic-flow
...
Conflicts:
lib/Slic3r/Flow.pm
lib/Slic3r/Layer.pm
2012-10-04 15:23:19 +02:00
Alessandro Ranellucci
d1e0bcf113
Bugfix: tool numbers written in G-code were wrong
2012-10-01 18:22:35 +02:00
Alessandro Ranellucci
1a6eaeaa91
Bugfix: split wasn't working properly under threaded perls
2012-10-01 18:12:14 +02:00
Alessandro Ranellucci
2c400ee2b8
Removed useless warning
2012-10-01 16:49:02 +02:00
Alessandro Ranellucci
faaf6d90b8
Bump version number
2012-09-28 17:44:38 +02:00
Alessandro Ranellucci
6bb4c28b01
Release 0.9.3
2012-09-28 17:06:19 +02:00
Alessandro Ranellucci
86e3508402
Add menu item pointing to documentation
2012-09-28 16:58:03 +02:00
Alessandro Ranellucci
22b312395a
Fix SVG/DLP support material. #673
2012-09-28 16:32:53 +02:00
Alessandro Ranellucci
c68862582c
Fix fatal error on empty layers caused by recent large refactorings
2012-09-28 15:48:32 +02:00
Alessandro Ranellucci
ab7697ec1c
New option to force a solid layer every given number of layers. #617
2012-09-28 15:46:29 +02:00
Alessandro Ranellucci
f50b0040ef
Bugfix: the grow() method wasn't working properly, causing bad brim/support material interface. #639
2012-09-28 15:27:33 +02:00
Alessandro Ranellucci
9ee9b54c73
Output an error if user tries to use 100% density with a non-solid fill pattern. #691
2012-09-28 14:13:06 +02:00
Alessandro Ranellucci
a49b045ce4
Do not call srand for each layer, to get better randomization of starting points. #694
2012-09-28 14:01:59 +02:00
Mike Sheldrake
4b91496edd
use remove_coinciding_points before convex_hull
...
convex_hull returns polygons with sharp concaves sometimes when
duplicate points are present
2012-09-27 06:47:38 -07:00
Mike Sheldrake
5ee68aa916
$parallel_degrees_limit decreased, 3 to 0.1, #704
...
Geometry::lines_parallel() test used for collapsing adjacent colinear
lines was too loose in testing for colinearity, because of this constant
setting. Gradualy curving and high-res outer perimiters would
over-simplify into straight lines.
2012-09-27 06:14:54 -07:00
Mike Sheldrake
2bcac88683
Increase scale factor for Clipper::offset
...
A default scale of 1 was being calculated most of the time. That's too
low to avoid artifacts from offsetting concave curves. Setting scale to
a default of 100000 eliminates artifacts in the test cases in issues
#700 , #702 and #703 . There is a risk of large point proliferation with
this scale in combination with the JT_ROUND option, but in the four
places where that option is used, scale is already explicitly set to a
safer low value.
2012-09-27 05:50:54 -07:00
Alessandro Ranellucci
fd74577eae
Fix typo in previous commit
2012-09-24 21:00:26 +02:00
