Lukas Matena
28c8e176b5
Yet another experimental parameter to adjust the initial loading speed of a newly loaded filament
2018-08-21 14:36:24 +02:00
Lukas Matena
74e807f89b
New experimental parameter to adjust initial loading speed of the filament from the nozzle
2018-08-14 16:23:23 +02:00
Lukas Matena
d5f042b4b8
Wipe tower postprocessing, wipe tower block on 3D plate improved.
...
- it renders red with one egde as indeterminate, the front edge is where the wipe tower will start
- changing width changes depth of the block (as requested)
- the block shows the brim of the wipe tower
- after slicing, the block is rendered in usual dark green and takes the exact shape of the tower (also with brim)
- moving or rotationg the block after slicing does not invalidate the wipe tower (and hence the exact block dimensions are preserved)
- changing anything that invalidates the wipe tower reverts the block back to the "indeterminate" shape
- the block is not shown after slicing, if the wipe tower is not actually generated (printing single color object with the wipe tower enabled)
This required changes in the wipe tower generator, which now generates the tower
at origin with no rotation. Resulting gcode is postprocessed and transformed during
gcode export. This means the wipe tower needs not be invalidated when it is moved or rotated.
2018-08-02 11:04:04 +02:00
Lukas Matena
6669357c81
Merge branch 'master' into wipe_tower_improvements
2018-06-21 10:41:01 +02:00
Lukas Matena
2d24bf5f73
Wipe into infill - copies of one object are properly processed
2018-05-31 16:21:10 +02:00
Lukas Matena
8bdbe41505
Wiping into infill should respect infill_first setting, marking moved to separate function
2018-05-30 11:56:30 +02:00
Lukas Matena
db22b2f504
Bugfix: first color of the wipe tower preview was incorrect with some models
2018-05-30 11:02:00 +02:00
Lukas Matena
132a67edb2
Wipe tower changes to reduce wiping volumes where appropriate
2018-05-24 17:24:37 +02:00
Lukas Matena
b6db3767a2
Bugfix: extruder temperature only changes when the temperature differs from the one last set (wipe tower)
2018-05-11 17:35:42 +02:00
Lukas Matena
8c77b9645c
Loading, unloading and cooling reworked, new filament parameters regarding cooling were added
2018-04-24 13:02:08 +02:00
Lukas Matena
d7dc04eb57
Removed parameter filament_cooling_time (fixed value of 14s for now)
2018-04-17 08:18:12 +02:00
Lukas Matena
a154fd34ee
Added parameter extra_loading_move, prevented high feedrate moves during loading
2018-04-16 14:26:57 +02:00
Lukas Matena
cb9937cde4
Corrected wipe tower comments in GCode
2018-04-06 12:02:52 +02:00
Lukas Matena
281732ca38
Variable layer height enabled, nozzle diameters properly passed to the wipe tower generator
2018-03-29 15:32:09 +02:00
Lukas Matena
1b4dc685f4
Connected filament_ramming_parameters to respective dialog, other minor changes
2018-03-28 15:37:10 +02:00
Lukas Matena
985b414c64
Removed parameter 'wipe_tower_per_color_wipe' from UI and configuration layer
2018-03-22 13:37:01 +01:00
Lukas Matena
9519fae490
Partial refactoring of wipe tower code (got rid of global constants, etc)
2018-03-21 15:57:17 +01:00
Lukas Matena
0fc2da5a32
Wipe tower generator should now work for more than 4 extruders (actual number extracted from wiping_volumes_matrix)
2018-03-20 15:45:11 +01:00
Lukas Matena
a782424d5f
Wipe tower generator connected to purging volumes from the configuration layer
2018-03-20 15:07:18 +01:00
Lukas Matena
76b280c64c
Removed parameter 'wipe_tower_adhesion', it will always be true
2018-03-19 15:53:49 +01:00
Lukas Matena
b556cec42d
Got rid of wipe_tower_advanced option
2018-03-16 13:58:58 +01:00
Lukas Matena
67009d80fd
Ramming parameters reduced to one and connected to the wipe tower generator again
2018-03-15 14:04:12 +01:00
Lukas Matena
9f18b639a8
Added filament_ramming_parameters and filament_ramming_buttons into configuration layer
2018-03-14 15:48:37 +01:00
Lukas Matena
27ab8ff4e1
Configuration layer changes (cooling_time, bridging, adhesion moved from dedicated dialog to filament/print settings)
2018-03-12 15:41:25 +01:00
Lukas Matena
6e39f61198
Priming extrusions, nozzle-wipes when leaving tower, removed few unnecessary moves
2018-03-09 12:40:39 +01:00
Lukas Matena
8340a71f88
Lots of unnecessary code removed, minor refactoring changes
2018-03-08 16:44:52 +01:00
Lukas Matena
f5cf181372
Sparse infill repositioned always to the same side
2018-03-07 15:34:12 +01:00
Lukas Matena
76aa134f66
Ramming lines that would end unsupported are made longer to reach to the edge
2018-03-07 11:44:47 +01:00
Lukas Matena
af281e13db
Last wipe on layer accounts of border and sparse infill (ugly, yet working)
2018-03-06 19:14:12 +01:00
Lukas Matena
5aca3045b9
(Un)loading speed and delay introduced into wipe tower generator
2018-03-05 10:45:35 +01:00
Lukas Matena
e1421da5e8
Integrating cooling tube parameters into wipe tower generator
2018-03-02 13:26:16 +01:00
Lukas Matena
d2006c8d8e
Cooling tubes parameters added into GUI and configuration layer (not yet into wipe tower generator)
2018-03-01 16:15:00 +01:00
Lukas Matena
b1b16359d9
Changes in includes in order to fix Win builds
2018-03-01 08:43:43 +01:00
Lukas Matena
9ea803b000
Attempts to fix OSX and Win builds
2018-02-28 19:53:32 +01:00
Lukas Matena
a62ad3323f
First naive implementation of wipe tower settings dialog
2018-02-28 16:04:56 +01:00
Lukas Matena
5f5a59328b
Minor refactoring, actualized comments, etc.
2018-02-22 11:03:29 +01:00
Lukas Matena
5a02bde170
Fix of merge conflict and uninitialized variables in writer class
2018-02-22 09:28:31 +01:00
Lukas Matena
5ca0a2f37d
Parametrized toolchanges, experiments with sparse wipe tower, etc
2018-02-21 13:07:32 +01:00
Lukas Matena
37bbeeb9d0
Parametrization of ramming and loading sequence - first steps
2018-01-04 12:03:06 +01:00
Lukas Matena
180967484e
Correction of wipe tower brim generation
2017-12-22 11:26:43 +01:00
Lukas Matena
4583d62edd
Merge branch 'master' into wipe_tower_improvements
2017-12-21 13:47:33 +01:00
Lukas Matena
b7a326a550
First attempts of variable wipe implementation, sparse infill modified to sawtooth
2017-12-21 13:28:26 +01:00
Lukas Matena
87c67636df
Extrusion flow calculation based on nozzle diameter etc
2017-12-07 11:59:14 +01:00
Lukas Matena
c34fd10e23
Wipe tower rotation around center point
2017-12-05 11:25:38 +01:00
bubnikv
16bd3fc624
Fixed an extruder ordering bug on the 1st layer wipe tower.
...
This is a regression after introducing the extruder priming areas
at the edge of the print bed.
2017-12-03 09:43:00 +01:00
Lukas Matena
2921302fe9
GUI integration of rotation angle setting
2017-11-30 12:08:22 +01:00
bubnikv
b08d6f1969
The last priming area is shortened and the excess wipe is moved
...
into the wipe tower if there is enough space inside the wipe tower.
2017-09-12 15:55:38 +02:00
bubnikv
b610866d77
Implemented priming of all the filaments of the Prusa Multi Material.
2017-09-01 17:30:18 +02:00
bubnikv
48f826c2c5
Disabled a limit of the nozzle diameter 0.4mm for the Prusa Wipe Tower.
...
Allowed scaling of the extrusion amount over the Prusa Wipe Tower
for layer heights over 0.2mm.
2017-08-28 14:57:00 +02:00
bubnikv
a15e6127cf
Relaxed the requirements on the layer height for the Wipe Tower to
...
the span of 0.15mm to 0.35mm.
2017-06-08 12:10:34 +02:00
