Alessandro Ranellucci
|
c133a33ed2
|
Ported point_line_distance() and removed same_point()
|
2013-11-06 23:08:03 +01:00 |
|
Alessandro Ranellucci
|
09be25a156
|
Removed useless functions
|
2013-11-06 21:09:28 +01:00 |
|
Alessandro Ranellucci
|
d8e098ab0e
|
Ported same_line() to XS
|
2013-11-06 19:38:10 +01:00 |
|
Alessandro Ranellucci
|
b5aaeb9b12
|
More work on the clipping method for medial axis. Includes Polyline->is_valid()
|
2013-11-06 19:30:45 +01:00 |
|
Alessandro Ranellucci
|
849d69d178
|
Fix regression in chained_path() introduced in fb763b0187. Includes regression test. #1184
|
2013-11-02 18:00:55 +01:00 |
|
Alessandro Ranellucci
|
4755e61d71
|
Bugfix: [input_filename] and [input_filename_base] were only available in the filename pattern and not in the custom G-code settings. #1507
|
2013-11-02 15:49:20 +01:00 |
|
Alessandro Ranellucci
|
0b63afb370
|
Fix complete_objects after XS port. Includes regression test. #1511
|
2013-11-02 14:44:30 +01:00 |
|
Alessandro Ranellucci
|
f491b7ba71
|
Fix t/support.t
|
2013-11-02 11:32:23 +01:00 |
|
Alessandro Ranellucci
|
3f7adfc07d
|
Fix raft_layers according to the new support material logic
|
2013-11-02 11:16:44 +01:00 |
|
Alessandro Ranellucci
|
d7656f5fdc
|
Use minimum extrusion width for support material too
|
2013-10-28 14:04:50 +01:00 |
|
Alessandro Ranellucci
|
ff25cc97fa
|
Explicitely clip support material with object slices (test case from #1397)
|
2013-10-27 23:20:06 +01:00 |
|
Alessandro Ranellucci
|
29b83517cb
|
Ported point_along_segment(), Polyline::length(), Polyline::clip_end() to XS
|
2013-10-27 22:57:25 +01:00 |
|
Alessandro Ranellucci
|
26a18a2a52
|
Temporarily revert to Voronoi-based medial axis
|
2013-10-27 22:02:57 +01:00 |
|
Alessandro Ranellucci
|
4f64e557d9
|
Typo
|
2013-10-27 21:38:32 +01:00 |
|
Alessandro Ranellucci
|
31f77748e7
|
Explain in the tooltip how is the threshold angle measured
|
2013-10-27 21:37:26 +01:00 |
|
Alessandro Ranellucci
|
a99d34a91a
|
Bad memory access in regular_points()
|
2013-10-27 20:55:55 +01:00 |
|
Alessandro Ranellucci
|
58d92ac36a
|
Support interface_layers == 0
|
2013-10-27 18:54:52 +01:00 |
|
Alessandro Ranellucci
|
bcc061176c
|
New option to use G10/G11 for firmware-controlled retraction. #1494
|
2013-10-27 16:59:18 +01:00 |
|
Alessandro Ranellucci
|
0e3c9ebe52
|
Extend interface into base support when the latter is contained in a hole (for better interface anchoring) and fix contact loops when object is enclosed in a hole
|
2013-10-27 16:37:04 +01:00 |
|
Alessandro Ranellucci
|
4cba5111a3
|
Fix generation of contact loops
|
2013-10-27 15:22:44 +01:00 |
|
Alessandro Ranellucci
|
06e7a1ae68
|
Optimizations to regular_points(), clip_end(), clip_start()
|
2013-10-27 13:51:59 +01:00 |
|
Alessandro Ranellucci
|
28e9682d0e
|
Several changes to support material, including a fix to prevent vertical overlapping and horizontal fusion of support and object
|
2013-10-27 10:19:26 +01:00 |
|
Alessandro Ranellucci
|
c08d4cc798
|
Fixed support unit tests and reduced dependency on $object
|
2013-10-26 17:56:59 +02:00 |
|
Alessandro Ranellucci
|
bdf825d078
|
Refactoring: split support material code into several methods
|
2013-10-26 17:20:54 +02:00 |
|
Alessandro Ranellucci
|
1741adaddf
|
Removed debugging line
|
2013-10-26 09:53:32 +02:00 |
|
Alessandro Ranellucci
|
b653839e9a
|
One more fix for Cancel button. #1461
|
2013-10-16 15:13:39 +02:00 |
|
Alessandro Ranellucci
|
127e38d4a4
|
Fix Cancel button. #1461
|
2013-10-14 22:07:41 +02:00 |
|
Alessandro Ranellucci
|
4c2c31b554
|
Fix speed math for wipe, which was causing too fast retraction. Includes regression test. #1468
|
2013-10-13 17:05:22 +02:00 |
|
Alessandro Ranellucci
|
bc0b9e1b72
|
Don't combine retract and travel anymore when using G0. #1289
|
2013-10-13 16:20:01 +02:00 |
|
Alessandro Ranellucci
|
e6b59aef4e
|
Fix planepath fill patterns for very small regions. #1463
|
2013-10-13 16:07:14 +02:00 |
|
Alessandro Ranellucci
|
9918c1e97d
|
Minor improvements in debug output
|
2013-10-13 12:12:03 +02:00 |
|
Alessandro Ranellucci
|
f603db5e84
|
Fix --export-svg
|
2013-10-13 11:45:22 +02:00 |
|
Alessandro Ranellucci
|
ac5e713323
|
Fix segfault when calling chained_path() on an ExtrusionPathCollection using no_sort. Includes regression test
|
2013-09-28 15:30:10 +02:00 |
|
Mark Hindess
|
f523c095b1
|
Trivial fix for support-related undefined sub errors.
|
2013-09-24 09:54:23 +01:00 |
|
Alessandro Ranellucci
|
0b526afb4e
|
Change labels in wizard to avoid confusion
|
2013-09-21 20:25:34 +02:00 |
|
Alessandro Ranellucci
|
0ef6311ac3
|
Do not set first layer bed temperature if user set bed temperature to zero in wizard
|
2013-09-21 20:14:17 +02:00 |
|
Alessandro Ranellucci
|
197cd8e68b
|
Typo
|
2013-09-19 16:09:47 +02:00 |
|
Alessandro Ranellucci
|
ed529b62f3
|
Fix threading issue with GUI. #1443 #1444
|
2013-09-19 16:00:47 +02:00 |
|
Alessandro Ranellucci
|
afdb490cf1
|
Fix STL export. #1448
|
2013-09-19 12:25:00 +02:00 |
|
Alessandro Ranellucci
|
032698fb07
|
Test that toolchanges happen outside skirt when standby-temperature is enabled
|
2013-09-19 10:44:29 +02:00 |
|
Alessandro Ranellucci
|
40fd7418cd
|
Added test for standby_temperature
|
2013-09-19 01:29:34 +02:00 |
|
Alessandro Ranellucci
|
0dd3ab0662
|
Don't block while cooling extruder
|
2013-09-18 20:05:15 +02:00 |
|
Alessandro Ranellucci
|
0062c3b7fc
|
Almost finished the implementation of --standby-temperature
|
2013-09-18 20:03:59 +02:00 |
|
Alessandro Ranellucci
|
9caf536aca
|
Finished a basic implementation of --standby-temperature
|
2013-09-18 18:49:19 +02:00 |
|
Alessandro Ranellucci
|
991bc8ae3d
|
Partial work for implementing a standby temperature option
|
2013-09-18 17:45:02 +02:00 |
|
Alessandro Ranellucci
|
4fe0675380
|
Removed ZTable code
|
2013-09-17 23:55:38 +02:00 |
|
Alessandro Ranellucci
|
a7989e382c
|
Bugfix: enabling raft layers generated support for the whole model. Includes regression test. #1375
|
2013-09-17 23:51:30 +02:00 |
|
Alessandro Ranellucci
|
e0da81e8bf
|
Introduce a ->count method for all collections to save time
|
2013-09-17 23:38:23 +02:00 |
|
Alessandro Ranellucci
|
e8323fc339
|
Move support material code to its own class
|
2013-09-17 23:27:57 +02:00 |
|
Alessandro Ranellucci
|
6adce9f66b
|
Update support material code to use shared memory
|
2013-09-17 23:14:49 +02:00 |
|
Alessandro Ranellucci
|
bbbdae3952
|
Better name for "Detect overhangs"
|
2013-09-17 21:49:13 +02:00 |
|
Alessandro Ranellucci
|
ea0e136b45
|
Prevent superfluous extra perimeters added when a region has an acute angle
|
2013-09-17 20:18:54 +02:00 |
|
Alessandro Ranellucci
|
06fc1d1044
|
Fix minor bug causing some gaps to be infilled twice
|
2013-09-17 19:39:22 +02:00 |
|
Alessandro Ranellucci
|
f79ba8cec0
|
Update dump-stl.pl
|
2013-09-17 19:25:10 +02:00 |
|
Alessandro Ranellucci
|
39449f9245
|
Revert a recent change made to shells generation, causing too much solid infill. Includes regression test. #1431
|
2013-09-17 19:24:16 +02:00 |
|
Alessandro Ranellucci
|
2c1274e2d9
|
Updated/fixed SectionCut
|
2013-09-17 14:16:29 +02:00 |
|
Alessandro Ranellucci
|
7bd2ce21ca
|
Fix wrong bridge flow used for overhangs and bridge perimeters. Includes regression test. #1407
|
2013-09-17 10:37:01 +02:00 |
|
Alessandro Ranellucci
|
d13e7b264a
|
New experimental medial axis code (suboptimal but looks good)
|
2013-09-17 10:37:01 +02:00 |
|
Alessandro Ranellucci
|
78167f56ee
|
Some cleanup for the Voronoi code
|
2013-09-17 10:37:01 +02:00 |
|
Alessandro Ranellucci
|
a88ce0cb5e
|
Fix regression in start perimeters at non-overhangs. #1442
|
2013-09-17 10:37:01 +02:00 |
|
Alessandro Ranellucci
|
9a51964e98
|
Clean medial axis code and gap fill
|
2013-09-17 10:37:01 +02:00 |
|
Alessandro Ranellucci
|
c7db2cb10f
|
Prune tiny shells to avoid random extra internal solid infill. #1431
|
2013-09-16 12:36:04 +02:00 |
|
Alessandro Ranellucci
|
aef5c05c57
|
Update brim generation code. Includes regression test. #1440
|
2013-09-16 10:33:30 +02:00 |
|
Alessandro Ranellucci
|
5a9c163a2e
|
Meaningful error when user wants to use 3D preview but didn't install the required modules.
|
2013-09-16 10:18:42 +02:00 |
|
Alessandro Ranellucci
|
7d09f17810
|
Reflect max_fan_speed in cooling textual description. #1439
|
2013-09-16 10:09:39 +02:00 |
|
Alessandro Ranellucci
|
1aa5dbafd3
|
Update AMF export code
|
2013-09-16 09:58:53 +02:00 |
|
Alessandro Ranellucci
|
e2cb40766b
|
Fix two more Boost calls after xsdata merge. #1429
|
2013-09-12 11:16:11 +02:00 |
|
Alessandro Ranellucci
|
5f54d0eb90
|
Fix concentric infill and add regression test. #1432
|
2013-09-12 11:14:54 +02:00 |
|
Alessandro Ranellucci
|
747fd25f6d
|
Fix threads, tests and require the most recent Moo version
|
2013-09-12 11:09:03 +02:00 |
|
Alessandro Ranellucci
|
bc48e17dff
|
Use precomputed normals in 3D preview
|
2013-09-11 20:15:42 +02:00 |
|
Alessandro Ranellucci
|
d4512a12df
|
Make plater work with new XS code
|
2013-09-11 20:00:51 +02:00 |
|
Alessandro Ranellucci
|
4c96a52012
|
Read OBJ and AMF
|
2013-09-11 14:46:38 +02:00 |
|
Alessandro Ranellucci
|
a821eb7f3c
|
More work to avoid working with vertices outside XS
|
2013-09-11 11:55:08 +02:00 |
|
Alessandro Ranellucci
|
11e18f681d
|
Incomplete work to store TriangleMesh objects in Model objects instead of extracting vertices and facets
|
2013-09-11 09:49:28 +02:00 |
|
Alessandro Ranellucci
|
78ee6e5d6d
|
Calls to ->repair where needed
|
2013-09-10 19:25:53 +02:00 |
|
Alessandro Ranellucci
|
566d38a472
|
Replace TriangleMesh with the XS port
|
2013-09-10 00:40:46 +02:00 |
|
Alessandro Ranellucci
|
5e34a9cf21
|
Make Repair() idempotent and lowercase
|
2013-09-09 23:18:33 +02:00 |
|
Alessandro Ranellucci
|
1b9d2e2ef8
|
Use the XS slicing code
|
2013-09-09 18:21:10 +02:00 |
|
Alessandro Ranellucci
|
873762491b
|
Fix a bad access after recent change about ->p returning objects by reference
|
2013-09-09 17:10:54 +02:00 |
|
Alessandro Ranellucci
|
5adb187dd2
|
More porting work
|
2013-09-07 21:08:53 +02:00 |
|
Alessandro Ranellucci
|
8607c559c7
|
Minor tidying
|
2013-09-07 00:42:56 +02:00 |
|
Alessandro Ranellucci
|
09684c67c2
|
Optimization: Remove useless calls to union()
|
2013-09-07 00:28:53 +02:00 |
|
Alessandro Ranellucci
|
10ab3bbb86
|
Fix Only infill where needed putting insufficient material. #1412
|
2013-09-07 00:02:58 +02:00 |
|
Alessandro Ranellucci
|
907ba55aab
|
Some minor fixes needed after the xsdata merge. #1421
|
2013-09-06 22:52:56 +02:00 |
|
Alessandro Ranellucci
|
f104659020
|
Optimization
|
2013-09-06 19:21:38 +02:00 |
|
Alessandro Ranellucci
|
4dd12b57a1
|
Fixed wipe (includes regression test). #1421
|
2013-09-06 19:14:06 +02:00 |
|
Alessandro Ranellucci
|
e02ae0d18a
|
Return Surface objects by reference from SurfaceCollection objects and fix a bug in XS code causing some shell options to be ignored
|
2013-09-06 18:36:38 +02:00 |
|
Alessandro Ranellucci
|
cb677c45de
|
Don't grow horizontal shells having acute angles. #1387
|
2013-09-06 17:43:40 +02:00 |
|
Alessandro Ranellucci
|
9484c377d9
|
Removed debugging line
|
2013-09-06 16:46:28 +02:00 |
|
Alessandro Ranellucci
|
a2cc54c9d0
|
Merge pull request #1424 from 4ZM/master
Changes to make slic3r build on Arch
|
2013-09-06 07:43:46 -07:00 |
|
Alessandro Ranellucci
|
2d3dae621a
|
Minor typos preventing correct positioning after recent XS merge
|
2013-09-05 14:23:31 +02:00 |
|
Anders Sundman
|
73878e0218
|
The 'use' prevented the build.
There is probably a reason for this line though.
|
2013-09-04 22:45:19 +02:00 |
|
Alessandro Ranellucci
|
67aefdccc7
|
Fixed --avoid-crossing-perimeters and --support-material after the xsdata merge
|
2013-09-04 00:10:53 +02:00 |
|
Alessandro Ranellucci
|
a49dc603cc
|
Many changes and fixes to remove leaks and return objects by reference
|
2013-09-03 19:26:58 +02:00 |
|
Alessandro Ranellucci
|
275422fac7
|
Don't return first_point() and last_point() by reference
|
2013-09-02 22:33:03 +02:00 |
|
Alessandro Ranellucci
|
0ffb0f6a58
|
Fix tests
|
2013-09-02 22:10:52 +02:00 |
|
Alessandro Ranellucci
|
c0789506e4
|
Return objects by reference instead of always cloning
|
2013-09-02 20:22:20 +02:00 |
|
Alessandro Ranellucci
|
1cfdf7e955
|
Ported Slic3r::Polyline::Collection
|
2013-08-30 00:06:10 +02:00 |
|
Alessandro Ranellucci
|
fb82de9aaf
|
Removed more unused code
|
2013-08-29 11:52:25 +02:00 |
|
Alessandro Ranellucci
|
649ef6ce79
|
Removed unused code
|
2013-08-29 11:48:58 +02:00 |
|
Alessandro Ranellucci
|
bd7b0e2aed
|
Ported ExtrusionPath::Collection->chained_path
|
2013-08-29 11:47:59 +02:00 |
|
Alessandro Ranellucci
|
ea1d138c95
|
Ported ExtrusionLoop->make_counter_clockwise()
|
2013-08-29 01:40:42 +02:00 |
|
Alessandro Ranellucci
|
5d6fd7f4d9
|
Optimizations for better usage of XS code
|
2013-08-29 01:36:42 +02:00 |
|
Alessandro Ranellucci
|
9254ff9704
|
Typo in merge
|
2013-08-28 20:43:23 +02:00 |
|
Alessandro Ranellucci
|
e19c6a1494
|
Ported Point->distance_to() and Line->length()
|
2013-08-28 20:41:41 +02:00 |
|
Alessandro Ranellucci
|
c9f68ed28a
|
Refactor E code and keep track of per-extruder consumend filament
|
2013-08-28 20:40:13 +02:00 |
|
Alessandro Ranellucci
|
70d824c9a7
|
One minor optimization in GCode.pm
|
2013-08-28 20:40:13 +02:00 |
|
Alessandro Ranellucci
|
5f17fa342b
|
Move arc fitting code to its own post-processing filter and remove the built-in ExtrusionPath::Arc class
|
2013-08-28 20:40:13 +02:00 |
|
Alessandro Ranellucci
|
055273fbc8
|
Huge speed boost by reducing the number of method calls in GCode.pm
|
2013-08-28 20:38:22 +02:00 |
|
Alessandro Ranellucci
|
73c05a6092
|
Moved vibration limit to its own G-code filter
|
2013-08-28 20:37:56 +02:00 |
|
Alessandro Ranellucci
|
fb763b0187
|
Removed dependency on Math::Clipper
|
2013-08-27 01:26:44 +02:00 |
|
Alessandro Ranellucci
|
b11b595c97
|
Ported nearest_point() and nearest_point_index()
|
2013-08-27 00:52:20 +02:00 |
|
Alessandro Ranellucci
|
f1e9216c70
|
Save some time in GCode.pm method calls
|
2013-08-27 00:02:24 +02:00 |
|
Alessandro Ranellucci
|
9fb14f2119
|
Ported (and used) ExtrusionPath->first_point
|
2013-08-26 23:42:00 +02:00 |
|
Alessandro Ranellucci
|
fe42427a54
|
Ported Polygon->is_valid() and ExPolygon->is_valid()
|
2013-08-26 23:27:51 +02:00 |
|
Alessandro Ranellucci
|
da0b85c0d9
|
Ported ExPolygon->contour and ExPolygon->holes
|
2013-08-26 23:09:18 +02:00 |
|
Alessandro Ranellucci
|
85011dfef3
|
Ported Surface->p
|
2013-08-26 23:03:00 +02:00 |
|
Alessandro Ranellucci
|
494ed5c5ad
|
Minor optimization (group offset_ex calls)
|
2013-08-26 22:54:06 +02:00 |
|
Alessandro Ranellucci
|
706851f836
|
Ported ExPolygon->area()
|
2013-08-26 22:50:26 +02:00 |
|
Alessandro Ranellucci
|
792fcba7be
|
Ported Polygon->area
|
2013-08-26 22:44:40 +02:00 |
|
Alessandro Ranellucci
|
1f734807b9
|
Ported Polygon->split_at()
|
2013-08-26 22:39:35 +02:00 |
|
Alessandro Ranellucci
|
9cf831b9c5
|
Ported union_pt() to XS
|
2013-08-26 18:37:19 +02:00 |
|
Alessandro Ranellucci
|
443d4e52cb
|
Fixed everything in the XS port
|
2013-08-26 17:58:37 +02:00 |
|
Alessandro Ranellucci
|
49040db9a3
|
Fixes to pass all tests
|
2013-08-26 16:25:42 +02:00 |
|
Alessandro Ranellucci
|
d786dd6c1c
|
Merge branch 'master' into xsdata
|
2013-08-25 22:34:03 +02:00 |
|
Alessandro Ranellucci
|
4bf08cbdec
|
Minor fix (still no thumbnail)
|
2013-08-25 22:33:50 +02:00 |
|
Alessandro Ranellucci
|
94a7d6b941
|
Validate config before launching the object settings dialog
|
2013-08-25 22:24:43 +02:00 |
|
Alessandro Ranellucci
|
fc9cec9d81
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print/Object.pm
|
2013-08-25 19:59:42 +02:00 |
|
Alessandro Ranellucci
|
026e0c06e4
|
Ability to customize how materials are mapped to extruders. #1020
|
2013-08-25 19:52:32 +02:00 |
|
Alessandro Ranellucci
|
cb0ee9729f
|
A couple fixes for Windows
|
2013-08-25 18:08:56 +02:00 |
|
Alessandro Ranellucci
|
ae9f13ed54
|
Minor fix to font size
|
2013-08-25 18:04:45 +02:00 |
|
Alessandro Ranellucci
|
ae21a45886
|
Distinct dialogs for 3D preview and object settings
|
2013-08-25 18:03:26 +02:00 |
|
Alessandro Ranellucci
|
b55d4a4e4b
|
Merge branch 'master' into plater2
|
2013-08-25 17:52:21 +02:00 |
|
Alessandro Ranellucci
|
e96d7b1d6a
|
Show facets, materials and manifoldness in info panel
|
2013-08-25 17:26:55 +02:00 |
|
Alessandro Ranellucci
|
fde6e371a9
|
Use multiple colors for multimaterial models in 3D preview
|
2013-08-25 16:35:21 +02:00 |
|
Alessandro Ranellucci
|
5b734f4a13
|
Merge branch 'master' into plater2
Conflicts:
lib/Slic3r/GUI/Plater.pm
|
2013-08-25 16:10:53 +02:00 |
|
Alessandro Ranellucci
|
2fb725405f
|
GUI fixes for Windows
|
2013-08-25 15:45:22 +02:00 |
|
Alessandro Ranellucci
|
3d6fb1b05c
|
New feature: ability to override specific settings for individual objects in the plater. #344
|
2013-08-25 14:37:50 +02:00 |
|
Alessandro Ranellucci
|
87b54ba2a0
|
Plater rearrange experiment
|
2013-08-25 12:22:05 +02:00 |
|
Alessandro Ranellucci
|
2dd6325bf8
|
Expose an Open button in the plater
|
2013-08-25 03:21:20 +02:00 |
|
Alessandro Ranellucci
|
945250c8c2
|
Show axes and ground
|
2013-08-25 02:58:50 +02:00 |
|
Alessandro Ranellucci
|
6f1fd51c2e
|
Keep objects vertical in 3D preview
|
2013-08-25 02:07:51 +02:00 |
|
Alessandro Ranellucci
|
097912755b
|
Fix handling of dirty models with overlapping facets, where some holes became filled because of wrong slice nesting
|
2013-08-19 16:53:54 +02:00 |
|
Alessandro Ranellucci
|
da1b6117df
|
Minor fix in debug code
|
2013-08-19 12:16:19 +02:00 |
|
Alessandro Ranellucci
|
94ca28644e
|
Ported union() to XS
|
2013-08-17 12:24:04 +02:00 |
|
Alessandro Ranellucci
|
fa07c512b4
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
|
2013-08-16 09:09:56 +02:00 |
|
Alessandro Ranellucci
|
314f377d7b
|
Debugging code
|
2013-08-13 20:17:17 +02:00 |
|
Alessandro Ranellucci
|
ef8ce1b5ba
|
Improvements to SVG debug tools: honor input order and support all colours
|
2013-08-13 10:34:49 +02:00 |
|
Alessandro Ranellucci
|
2b36778dc1
|
Fix a situation where extra perimeters prevented top shell to be fully propagated. #1387
|
2013-08-13 09:45:33 +02:00 |
|
Alessandro Ranellucci
|
36596bf569
|
Bugfix: alignment code for rectilinear infill caused lack of infill (regression in 948b43f). #1387
|
2013-08-12 20:27:25 +02:00 |
|
Alessandro Ranellucci
|
f1922ce7b3
|
Fix regression causing lack of contact infill
|
2013-08-12 19:19:22 +02:00 |
|
Alessandro Ranellucci
|
e5fe04ea7a
|
Make sure teeth are not too tight
|
2013-08-12 19:10:40 +02:00 |
|
Alessandro Ranellucci
|
9513fa7600
|
Enforce some horizontal margin between object and interface/support (contact not affected)
|
2013-08-12 18:55:11 +02:00 |
|
Alessandro Ranellucci
|
ca7d4163d7
|
Remove jitter and overlaps in interface infill
|
2013-08-12 18:45:03 +02:00 |
|
Alessandro Ranellucci
|
7062d028d2
|
Bugfix: top layers were not detected correctly, causing overlap of support material and object in some situations where there were contact regions having the same Z as some top regions
|
2013-08-12 18:12:53 +02:00 |
|
Alessandro Ranellucci
|
8d413eda44
|
Refactoring: generate interface and support in different cycles
|
2013-08-11 19:25:51 +02:00 |
|
Alessandro Ranellucci
|
5f07d39509
|
Reapply perimeter only to support
|
2013-08-10 21:30:50 +02:00 |
|
Alessandro Ranellucci
|
5380b6cb33
|
Incomplete work to improve support material by avoiding thin columns and making sure everything is supported correctly
|
2013-08-10 19:39:35 +02:00 |
|
Alessandro Ranellucci
|
abb5d1256f
|
Added some debugging code
|
2013-08-09 21:27:57 +02:00 |
|
Alessandro Ranellucci
|
4862d832b5
|
Simplify layer change code now that we have distinct support layers
|
2013-08-09 19:46:20 +02:00 |
|
Alessandro Ranellucci
|
548b301432
|
Offset projection of facets before the final union
|
2013-08-09 16:34:55 +02:00 |
|
Alessandro Ranellucci
|
b956faa153
|
Adapt avoid_crossing_perimeters code to the recent changes
|
2013-08-09 16:30:40 +02:00 |
|
Alessandro Ranellucci
|
3751e3813c
|
Fix regression causing too much collapsing of infill regions
|
2013-08-09 16:18:21 +02:00 |
|
Alessandro Ranellucci
|
5d80c26b29
|
Adjust collision detection for brim and include support islands inside the only_retract_when_crossing_perimeters logic
|
2013-08-09 15:04:14 +02:00 |
|
Alessandro Ranellucci
|
67f5b7ab14
|
Require --default-acceleration when other acceleration settings are used
|
2013-08-09 14:33:20 +02:00 |
|
Alessandro Ranellucci
|
99816e07a6
|
New --first-layer-acceleration option
|
2013-08-09 14:30:43 +02:00 |
|
Alessandro Ranellucci
|
cde662cb51
|
Fix collision detection for brim
|
2013-08-09 14:22:41 +02:00 |
|
Alessandro Ranellucci
|
3427b29a93
|
Fix wrong slices when many overlapping facets were present in the model
|
2013-08-08 16:27:41 +02:00 |
|
Alessandro Ranellucci
|
f6569cf359
|
Minor error causing support material to fail when first_layer_height was expressed in % (caught by regression test). #1371
|
2013-08-08 14:41:23 +02:00 |
|
Alessandro Ranellucci
|
b38cc2c244
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r.pm
lib/Slic3r/ExPolygon.pm
lib/Slic3r/Fill.pm
lib/Slic3r/Fill/Rectilinear.pm
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Geometry/Clipper.pm
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
lib/Slic3r/TriangleMesh.pm
t/shells.t
xs/MANIFEST
|
2013-08-08 02:10:34 +02:00 |
|
Alessandro Ranellucci
|
4438aec12c
|
Revert "Remove thumbnail simplification because it caused loss of very thin parts. #1327"
This reverts commit 1210b89893.
Conflicts:
lib/Slic3r/GUI/Plater.pm
|
2013-08-05 20:48:09 +02:00 |
|
Alessandro Ranellucci
|
0ce7ebc4b8
|
Integerize plater thumbnails
|
2013-08-05 20:21:08 +02:00 |
|
Alessandro Ranellucci
|
d8e2cde962
|
Avoid problems caused in support material by layer heights being specified in configuration without the leading 0 (like .25). #1366
|
2013-07-31 23:44:17 +02:00 |
|
Alessandro Ranellucci
|
528595c7f7
|
Automatically ignore per-role extruders if they're not configured in Printer Settings (only in GUI expert mode) - CLI mode continues to autogenerate extruder settings. #1236
|
2013-07-31 20:43:19 +02:00 |
|
Alessandro Ranellucci
|
d83b14655a
|
Better tooltip for raft layers
|
2013-07-31 20:02:24 +02:00 |
|
Alessandro Ranellucci
|
6ddeb2fa07
|
Initialize support material interface extruder explicitely. #1364
|
2013-07-31 19:52:25 +02:00 |
|
Alessandro Ranellucci
|
415a2d165a
|
Cleaner code for first layer temperatures
|
2013-07-31 18:55:23 +02:00 |
|
Alessandro Ranellucci
|
60e5e2166a
|
Include support contact layers in skirt/brim generation
|
2013-07-31 16:29:44 +02:00 |
|
Alessandro Ranellucci
|
3b47e1a492
|
New --info option to show file info (size, volume, repair stats). Removed utils/file_info.pl
|
2013-07-31 15:10:11 +02:00 |
|
Alessandro Ranellucci
|
1b4878f305
|
Fix hang in new support material caused by numerical approximation leaving small polygons, as usual
|
2013-07-30 15:44:08 +02:00 |
|
Alessandro Ranellucci
|
4e13d61aed
|
Fix retraction/Z/lift problems after recent changes
|
2013-07-30 12:15:40 +02:00 |
|
Alessandro Ranellucci
|
913f401280
|
Merge new-support2
|
2013-07-29 20:50:26 +02:00 |
|
Alessandro Ranellucci
|
a2cc230bb5
|
Add note about a bug caused by the disabled optimization about splitting meshes before avoid_crossing_perimeters. #1315
|
2013-07-29 19:50:47 +02:00 |
|
Alessandro Ranellucci
|
10a8f479f9
|
Bugfix: lift was not working correctly with multiple extruders and multiple skirt layers. Also, we now ignore all lift settings except the one of the first extruder. Includes regression tests. #1332 #1338
|
2013-07-29 19:43:57 +02:00 |
|
Alessandro Ranellucci
|
b5907dc734
|
Bugfix: z_offset was not applied in spiral_vase. Includes regression test #1343
|
2013-07-29 17:28:30 +02:00 |
|
Alessandro Ranellucci
|
1210b89893
|
Remove thumbnail simplification because it caused loss of very thin parts. #1327
|
2013-07-29 16:43:48 +02:00 |
|
Alessandro Ranellucci
|
dc766f9f73
|
Bugfix: the tangent edge removal algorithm was refactored the wrong way and wasn't used anymore
|
2013-07-29 14:56:37 +02:00 |
|
Alessandro Ranellucci
|
8fe38d9b71
|
Bugfix: fatal error when failed loops were included in slices. #1358
|
2013-07-29 14:17:36 +02:00 |
|
Alessandro Ranellucci
|
9adac636b8
|
Avoid G92 E0 with sailfish. #1034
|
2013-07-29 14:17:30 +02:00 |
|
Alessandro Ranellucci
|
80676f358a
|
Keep edge lines in rectilinear infill even when the sides are not perfectly straight
|
2013-07-29 13:36:22 +02:00 |
|
Alessandro Ranellucci
|
2a2d15e422
|
Fix error after recent change about bridges
|
2013-07-29 12:15:30 +02:00 |
|
Alessandro Ranellucci
|
1f36406a62
|
Bugfix: thin bridge anchors were ignored. #304
|
2013-07-29 11:54:32 +02:00 |
|
Alessandro Ranellucci
|
948b43fe0d
|
Don't try to align rectilinear infill if solid, otherwise there will be a gap at one side
|
2013-07-29 11:05:04 +02:00 |
|
Alessandro Ranellucci
|
51de3ce14f
|
Switch print_z to unscaled coordinates
|
2013-07-29 00:27:53 +02:00 |
|
Alessandro Ranellucci
|
3bcb2f04ed
|
Add spiral vase test for hollow models
|
2013-07-28 15:02:03 +02:00 |
|
Alessandro Ranellucci
|
91cade7e8f
|
Make sure there are no gaps in spiral vase. Includes regression test. #1251
|
2013-07-28 13:39:15 +02:00 |
|
Alessandro Ranellucci
|
691c45d57f
|
Smarter handling of hollow prints. Optimization included
|
2013-07-28 10:56:41 +02:00 |
|
Alessandro Ranellucci
|
25af3eb35f
|
Proper fix for preventing shells to propagate too much
|
2013-07-27 19:41:36 +02:00 |
|
Alessandro Ranellucci
|
6bd4803612
|
Failing test case about spurious infill in hollow objects, caused by shells being correctly generated even for hollow objects - however sometimes we don't want that
|
2013-07-26 20:17:33 +02:00 |
|
Alessandro Ranellucci
|
0a8872ca6c
|
Extend utils/dump-stl.pl to also write STL files
|
2013-07-26 19:25:15 +02:00 |
|