Alessandro Ranellucci
bb5f00cf0c
Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666
2012-09-12 12:13:43 +02:00
Alessandro Ranellucci
c763f5fc81
Bugfix: fatal error with thin loops after recent refactoring. #562
2012-07-28 11:06:27 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Alessandro Ranellucci
1697cb24a6
Memory optimization and code cleanup. Don't keep deserialized paths
2012-07-20 14:39:56 +02:00
Alessandro Ranellucci
96574e601f
Infill flow wasn't adjusted for non-solid surfaces
2012-07-05 10:34:02 +02:00
Alessandro Ranellucci
c4b9a6cf61
Bugfix: flow wasn't adjusted for perimeters when a custom perimeters extrusion width was applied
2012-07-01 18:13:48 +02:00
Alessandro Ranellucci
b9008a99f9
Fill the gaps while doing normal infill to avoid extra travel
2012-06-30 16:33:01 +02:00
Alessandro Ranellucci
898266fd34
Initial refactoring for supporting multiple extruders. Little speed optimization included
2012-06-28 14:44:54 +02:00
Alessandro Ranellucci
eea6d84314
Bugfix: infill extrusion width was ignored
2012-06-27 19:55:54 +02:00
Alessandro Ranellucci
0c4b112718
Fixed regression preventing arcs to be generated at all (center detection is still buggy)
2012-06-07 19:53:27 +02:00
Alessandro Ranellucci
fbfbfac2b6
New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151
2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
494f4f94bf
After recent memory optimizations, no solid layers were made when using fill density == 0
2012-05-20 17:28:53 +02:00
Alessandro Ranellucci
882a022e3a
Even more constants, less memory, more speed
2012-05-19 16:04:33 +02:00
Alessandro Ranellucci
aa9563f00b
More constants, less strings => ess memory usage
2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
91d1b21c40
Use honeycomb pattern for support material
2012-04-30 23:50:38 +02:00
Alessandro Ranellucci
d03925a18d
New GUI with plating facilities
2012-04-30 14:56:01 +02:00
Alessandro Ranellucci
fc0fa0c738
Remove Rectilinear2 infill
2012-04-16 14:06:52 +02:00
Alessandro Ranellucci
d51ba94e8a
Remove XXX from dependencies
2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
cb182b8bc2
Honeycomb infill. #300
2012-04-16 11:55:14 +02:00
Alessandro Ranellucci
555c23069d
New --post-process option. Includes some cleaning of the STDOUT messages
2012-02-20 12:50:05 +01:00
Alessandro Ranellucci
7b67fae686
Support material
2012-02-19 12:03:36 +01:00
Alessandro Ranellucci
8b777e9d70
Multithreaded infill. #154
2012-01-28 16:27:52 +01:00
Alessandro Ranellucci
f419cf37d1
Use solid print speed for internal solid layers too. #167
2012-01-18 10:07:42 +01:00
Alessandro Ranellucci
90d10b24a8
Fill gaps using medial axis detection
2012-01-12 22:05:35 +01:00
Alessandro Ranellucci
8735ac3c57
Bridges now have higher priority than other solid surfaces. #140
2012-01-11 23:16:09 +01:00
Alessandro Ranellucci
8ed91a8ec4
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
2011-12-30 19:59:51 +01:00
Alessandro Ranellucci
f20209ce01
Add spacing between adjacent surfaces to avoid mini blobs
2011-12-18 13:38:45 +01:00
Alessandro Ranellucci
1e6ecd9eab
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
2011-12-17 19:52:34 +01:00
Alessandro Ranellucci
172253cfd7
Always use rectilinear infill for internal-solid surfaces
2011-12-15 22:05:15 +01:00
Alessandro Ranellucci
048f7ca468
Adjusted flow width for solid infills was ignored
2011-12-14 11:35:19 +01:00
Alessandro Ranellucci
56691c1dea
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
2011-12-13 17:34:31 +01:00
Alessandro Ranellucci
d9a70ea80d
Customizable overlap ratio (it defaults to 0.15 now)
2011-12-08 10:53:07 +01:00
Alessandro Ranellucci
313f77ee59
Bugfix: removed error when filling small regions
2011-12-05 19:54:19 +01:00
Alessandro Ranellucci
28a89c70c9
New bridge flow rate multiplier option. #85
2011-12-04 20:29:21 +01:00
Alessandro Ranellucci
0aff5fab24
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
2011-12-04 16:24:46 +01:00
Alessandro Ranellucci
792960aae1
Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58
2011-12-02 23:35:39 +01:00
Alessandro Ranellucci
b03afc7f1c
Bugfix: some bridges were not detected correctly. #57
2011-11-30 20:32:28 +01:00
Michael Moon
729905d342
allow solid fill layers to be zero
2011-11-30 12:51:34 +11:00
Alessandro Ranellucci
2970e31540
Bugfix: some bridges being very close could lead to overlapping infill
2011-11-29 11:36:52 +01:00
Alessandro Ranellucci
3ad9ed74ae
New --solid-infill-feed-rate option. #68
2011-11-28 19:11:26 +01:00
Alessandro Ranellucci
975387d953
New --bridge-feed-rate option. #68
2011-11-28 18:37:53 +01:00
Alessandro Ranellucci
951778439a
Bugfix: recent changes broke the "infill every layers" option which didn't alternate infill direction correctly. #70
2011-11-26 15:21:15 +01:00
Alessandro Ranellucci
0ab1fd4c19
concentric - new superfast infill pattern
2011-11-26 10:38:45 +01:00
Alessandro Ranellucci
8598b66b0a
Large refactoring. Cleaner logic, smaller memory footprint.
2011-11-23 12:29:27 +01:00
Alessandro Ranellucci
13ef24b5eb
Fixes, improvements and refactoring for bridges and solid surfaces.
2011-11-23 09:49:39 +01:00
Alessandro Ranellucci
a1c766cc52
New bridging logic, more robust. #58
2011-11-19 16:44:24 +01:00
Alessandro Ranellucci
1ef4d006a0
Treating "reverse bridges" as bridges should not change the way they're infilled or the chosen flow width
2011-11-18 09:54:28 +01:00
Alessandro Ranellucci
612b2e6ded
Slic3r::Fill::PlanePath was not explicitely included, puzzling the packager
2011-11-14 15:23:17 +01:00
