Alessandro Ranellucci
|
a4194554c9
|
Write single wall width (extrusion width) to the G-code file
|
2012-01-21 17:02:55 +01:00 |
|
Alessandro Ranellucci
|
a0ebee2ca3
|
Warn if no layers were detected
|
2012-01-21 11:34:03 +01:00 |
|
Alessandro Ranellucci
|
92cdaf2f2d
|
Retract at end of print
|
2012-01-20 14:48:51 +01:00 |
|
Alessandro Ranellucci
|
bba91fc0a5
|
Some better debug messages and a note about self-intersecting polygons. #160
|
2012-01-18 18:59:34 +01:00 |
|
Alessandro Ranellucci
|
0184b0f205
|
Fixed many little things that were not updated along with recent large refactoring. #157 #144
|
2012-01-11 20:13:26 +01:00 |
|
Alessandro Ranellucci
|
8ed91a8ec4
|
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
|
2011-12-30 19:59:51 +01:00 |
|
Alessandro Ranellucci
|
4b2bd7f779
|
Bugfix: wrong month number in output
|
2011-12-30 18:57:58 +01:00 |
|
Alessandro Ranellucci
|
f08ebe97b2
|
Bugfix: fatal error for some models and thin walls not considered for skirt
|
2011-12-30 18:51:48 +01:00 |
|
Alessandro Ranellucci
|
1c7564e4a4
|
Thin walls. #24
|
2011-12-30 17:17:37 +01:00 |
|
Alessandro Ranellucci
|
55045e0437
|
Limit skirt height to the print height. #128
|
2011-12-22 11:57:26 +01:00 |
|
Alessandro Ranellucci
|
caf41f07dd
|
Output required filament length and volume to command line and to the gcode file itself
|
2011-12-20 15:29:15 +01:00 |
|
Alessandro Ranellucci
|
627e1b32e2
|
Add Slic3r version to gcode comment
|
2011-12-20 14:20:39 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|
Alessandro Ranellucci
|
f5eb4f03e1
|
Skirt can be disabled by either setting skirts to 0 or skirt-height to 0
|
2011-12-16 09:55:13 +01:00 |
|
Alessandro Ranellucci
|
b422537cc4
|
Bugfix: do not die when no layers are detected at all
|
2011-12-15 20:36:46 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
869cb48c1a
|
Merge branch 'master' of github.com:alexrj/Slic3r
|
2011-12-12 17:35:18 +01:00 |
|
Alessandro Ranellucci
|
3c2b2cfef2
|
Bugfix: duplicate options did not work correctly for copies > 2. #113
|
2011-12-12 17:32:45 +01:00 |
|
Richard Goodwin
|
557afcc4b1
|
Added scale to settings output
|
2011-12-11 15:32:47 -06:00 |
|
Alessandro Ranellucci
|
0a74e068a3
|
Merge branch 'infill-overlap'
|
2011-12-08 10:53:24 +01:00 |
|
Alessandro Ranellucci
|
d9a70ea80d
|
Customizable overlap ratio (it defaults to 0.15 now)
|
2011-12-08 10:53:07 +01:00 |
|
Alessandro Ranellucci
|
1f64a01ed4
|
Remove empty layers from bottom. They could be caused by little contact with the print bed, resulting in the need of thin walls. While thin walls will be supported one day, it's still not optimal to have so little contact on bottom layer(s), so we remove such layers. #96
|
2011-12-08 10:25:19 +01:00 |
|
Alessandro Ranellucci
|
525855dc7d
|
Bugfix: fatal error when combining infills. #96
|
2011-12-07 20:15:08 +01:00 |
|
Alessandro Ranellucci
|
2ba513bdb2
|
Bugfix: after recent changes, objects had slight dimension errors. #56
|
2011-12-05 18:48:48 +01:00 |
|
Alessandro Ranellucci
|
3d0cde2fce
|
Fixed regression. The repair algorithm was not working after recent changes. Releasing 0.5.5b. #16 #28
|
2011-12-05 13:01:02 +01:00 |
|
Alessandro Ranellucci
|
eb64cc4965
|
More fixes for bridges. #58
|
2011-12-04 18:37:37 +01:00 |
|
Alessandro Ranellucci
|
0aff5fab24
|
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
|
2011-12-04 16:24:46 +01:00 |
|
Alessandro Ranellucci
|
4fe340cc56
|
Many fixes to the bridge direction detection algorithm and other things. #58
|
2011-12-03 18:31:31 +01:00 |
|
Alessandro Ranellucci
|
792960aae1
|
Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58
|
2011-12-02 23:35:39 +01:00 |
|
Alessandro Ranellucci
|
52c9897eda
|
New --extrusion-axis option; removed --no-extrusion
|
2011-12-01 22:34:21 +01:00 |
|
Alessandro Ranellucci
|
830965fc0b
|
Note used settings in exported gcode. #52
|
2011-12-01 22:20:48 +01:00 |
|
Alessandro Ranellucci
|
2a02d26ca5
|
Fixed regression: fill density = 0 was preventing extra solid layers. #75
|
2011-12-01 21:15:02 +01:00 |
|
Alessandro Ranellucci
|
b03afc7f1c
|
Bugfix: some bridges were not detected correctly. #57
|
2011-11-30 20:32:28 +01:00 |
|
Alessandro Ranellucci
|
42383dec84
|
Warn about models with overlapping or intersecting facets but try to repair wrong layers. #16
|
2011-11-30 16:28:09 +01:00 |
|
Alessandro Ranellucci
|
d51a37a0ae
|
Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16
|
2011-11-30 16:07:31 +01:00 |
|
Alessandro Ranellucci
|
d168ecbb4e
|
Bugfix: fill density = 0 was preventing generation of extra solid layers. #75
|
2011-11-29 10:15:50 +01:00 |
|
Alessandro Ranellucci
|
975387d953
|
New --bridge-feed-rate option. #68
|
2011-11-28 18:37:53 +01:00 |
|
Alessandro Ranellucci
|
4cdd0f6fd0
|
Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero.
|
2011-11-27 10:12:44 +01:00 |
|
Alessandro Ranellucci
|
afd8e0a1bd
|
Bugfix: setting temperature to zero didn't remove it from output
|
2011-11-26 15:11:11 +01:00 |
|
Alessandro Ranellucci
|
f3b689d4e0
|
Bugfix: infill every 'n' layers was broken after recent changes
|
2011-11-25 18:16:31 +01:00 |
|
Alessandro Ranellucci
|
47d347e1b2
|
Revert "Disable retraction when moving over infill space. #29"
This reverts commit d6ed9c6f34.
|
2011-11-24 12:53:09 +01:00 |
|
Alessandro Ranellucci
|
8598b66b0a
|
Large refactoring. Cleaner logic, smaller memory footprint.
|
2011-11-23 12:29:27 +01:00 |
|
Alessandro Ranellucci
|
13ef24b5eb
|
Fixes, improvements and refactoring for bridges and solid surfaces.
|
2011-11-23 09:49:39 +01:00 |
|
Alessandro Ranellucci
|
d13a0e2503
|
Bugfix: no top surfaces when they were too close to bridges
|
2011-11-22 21:45:05 +01:00 |
|
Alessandro Ranellucci
|
84d9f5fd9d
|
Bugfix: some regions near bridges were left blank. #58
|
2011-11-21 21:05:00 +01:00 |
|
Alessandro Ranellucci
|
00beb7e118
|
Merge branch 'new-bridges'
|
2011-11-21 12:49:41 +01:00 |
|
Alessandro Ranellucci
|
d6ed9c6f34
|
Disable retraction when moving over infill space. #29
|
2011-11-21 12:37:12 +01:00 |
|
Alessandro Ranellucci
|
ed9b4e829c
|
Add a M109 for temperature control
|
2011-11-19 17:37:04 +01:00 |
|
Alessandro Ranellucci
|
4a9fc942cb
|
Add a M109 for temperature control
|
2011-11-19 17:32:37 +01:00 |
|
Alessandro Ranellucci
|
a1c766cc52
|
New bridging logic, more robust. #58
|
2011-11-19 16:44:24 +01:00 |
|
Alessandro Ranellucci
|
8aca717209
|
Print solid infill without cutting an internal surface under small regions such as pillars. #39
|
2011-11-16 16:35:20 +01:00 |
|
Alessandro Ranellucci
|
47c0da8110
|
Bugfix: some solid layers were skipped. #47
|
2011-11-16 14:53:30 +01:00 |
|
Alessandro Ranellucci
|
55f00fdb35
|
Little refactoring, removing useless methods
|
2011-11-16 10:16:01 +01:00 |
|
Alessandro Ranellucci
|
2abd8fe240
|
Bugfix: bottom layer speed settings were ignored.
|
2011-11-15 12:02:31 +01:00 |
|
Alessandro Ranellucci
|
e65349469b
|
Disable M104 if temperature is 0
|
2011-11-15 12:00:09 +01:00 |
|
Alessandro Ranellucci
|
9e42158582
|
Remove G92 E0 if --no-extrusion was supplied
|
2011-11-14 18:14:12 +01:00 |
|
Alessandro Ranellucci
|
8f32ee8f5a
|
Bugfix: recent changes broke the "Infill every N layers" feature
|
2011-11-13 21:46:32 +01:00 |
|
Alessandro Ranellucci
|
097b8d9acb
|
New --skirt-height option. #11
|
2011-11-13 18:41:12 +01:00 |
|
Alessandro Ranellucci
|
76dfda3b09
|
Comment for M104 was erroneously saying that it would wait for temperature. #49
|
2011-11-13 18:22:33 +01:00 |
|
Alessandro Ranellucci
|
a13e4c6fb5
|
Detect membranes (solid parts generating both a bottom and a top surface on the same layers) and don't infill twice. #28
|
2011-11-12 11:05:32 +01:00 |
|
Alessandro Ranellucci
|
c5d5e4d244
|
Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28
|
2011-11-12 10:18:20 +01:00 |
|
Alessandro Ranellucci
|
fec816b065
|
Collect undetected lines (caused by dirty or non-manifold models), warn the user, post debug info. Includes some further ExPolygon refactoring.
|
2011-11-11 10:21:48 +01:00 |
|
Alessandro Ranellucci
|
0b42139e54
|
Print first layer at Z = 1 * layer_height instead of zero like it was until now. #17
|
2011-11-07 16:04:27 +01:00 |
|
Alessandro Ranellucci
|
7f341cfcd3
|
New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill
|
2011-10-18 15:57:53 +02:00 |
|
Alessandro Ranellucci
|
54cc6216a1
|
Bugfix: extrusion distance wasn't reset at print start, causing a possible huge retraction.
|
2011-10-17 21:38:41 +02:00 |
|
Alessandro Ranellucci
|
5090ae561c
|
Refactored Perimeter code with new Slic3r::Polygon and Slic3r::ExPolygon objects
Large refactoring. Speed gains. Removed convex hull for bridges.
|
2011-10-15 21:14:13 +02:00 |
|
Alessandro Ranellucci
|
2d784fac9b
|
New --start-gcode and --end-gcode options. #12
|
2011-10-14 16:24:55 +02:00 |
|
Alessandro Ranellucci
|
56619871b2
|
Bugfix: some bridges had wrong perimeters inside
|
2011-10-13 22:22:45 +02:00 |
|
Alessandro Ranellucci
|
e410410dc7
|
Refactoring. Point objects are now plain arrayrefs. Slicing is 30% faster.
|
2011-10-12 14:54:49 +02:00 |
|
Alessandro Ranellucci
|
bca3abb755
|
More fixes.
|
2011-10-10 17:27:00 +02:00 |
|
Alessandro Ranellucci
|
34681af6ae
|
Improvements for bottom and top surfaces perimeters
|
2011-10-10 16:31:37 +02:00 |
|
Alessandro Ranellucci
|
84abd41cf4
|
Fixes for bridges
|
2011-10-09 22:18:06 +02:00 |
|
Alessandro Ranellucci
|
459577f9a2
|
Completely rewritten the slicing algorithm
It should work with any model now. There are still problems with some
bridges.
|
2011-10-09 19:47:21 +02:00 |
|
Alessandro Ranellucci
|
743f2abcf2
|
Detection of optimal infill direction for bridges. Includes many fixes and improvements.
|
2011-10-07 19:07:57 +02:00 |
|
Alessandro Ranellucci
|
119eb0693f
|
New high_res_perimeters option (like the "Skin" plugin for Skeinforge)
|
2011-10-06 17:11:59 +02:00 |
|
Alessandro Ranellucci
|
33d7b8c7cf
|
Code refactored to allow for multiple infill types
|
2011-10-06 15:13:09 +02:00 |
|
Alessandro Ranellucci
|
2da5ee7448
|
Bugfixes and improvements in surface detection
|
2011-10-04 22:27:45 +02:00 |
|
Alessandro Ranellucci
|
21d287504c
|
New --perimeter-feed-rate and --retract-before-travel options. Includes some refactoring and fixes.
|
2011-10-02 09:57:37 +02:00 |
|
Alessandro Ranellucci
|
55f2247cd9
|
New extrusion math
|
2011-10-01 18:10:33 +02:00 |
|
Alessandro Ranellucci
|
b61b543243
|
Minor cleanups
|
2011-09-26 19:53:01 +02:00 |
|
Alessandro Ranellucci
|
8d13d4b21e
|
New option to shift Z coordinates
|
2011-09-26 15:59:03 +02:00 |
|
Alessandro Ranellucci
|
b0433097d4
|
New option to customize infill angle
|
2011-09-26 15:51:22 +02:00 |
|
Alessandro Ranellucci
|
c2a62891da
|
Remove features that are too small to be printed
|
2011-09-26 11:59:06 +02:00 |
|
Alessandro Ranellucci
|
081f65852d
|
Refactor extrusion logic in a dedicated class
|
2011-09-26 11:42:08 +02:00 |
|
Alessandro Ranellucci
|
415d1a5170
|
Optimization of travel paths for fills
|
2011-09-26 10:52:58 +02:00 |
|
Alessandro Ranellucci
|
0cd10441a1
|
Optimization of travel paths for perimeters
|
2011-09-25 23:15:45 +02:00 |
|
Alessandro Ranellucci
|
03341f3485
|
Multiple solid layers near external surfaces
|
2011-09-25 22:11:56 +02:00 |
|
Alessandro Ranellucci
|
18c7aef1a7
|
Lots of changes and refactoring after testing with hollow objects
|
2011-09-18 19:28:12 +02:00 |
|
Alessandro Ranellucci
|
26b05ab155
|
Replaced Moose with Moo => big performance boost and easier packaging
|
2011-09-06 11:50:43 +02:00 |
|
Alessandro Ranellucci
|
3421e8fef8
|
Improvements to avoid blobs
|
2011-09-05 20:29:07 +02:00 |
|
Alessandro Ranellucci
|
ff5044c031
|
Implemented skirt
|
2011-09-05 20:00:59 +02:00 |
|
Alessandro Ranellucci
|
d8b848a67f
|
Implemented retraction and fixed extrusion math
|
2011-09-05 18:52:09 +02:00 |
|
Alessandro Ranellucci
|
5595839b31
|
Command line interface
|
2011-09-05 13:33:09 +02:00 |
|
Alessandro Ranellucci
|
778e4f6ffa
|
Allow for different speed on bottom layer
|
2011-09-05 12:22:54 +02:00 |
|
Alessandro Ranellucci
|
9e111d0a6d
|
Rectilinear fill
|
2011-09-05 12:21:27 +02:00 |
|
Alessandro Ranellucci
|
a5ba0af7ef
|
Generate GCODE
|
2011-09-03 20:47:38 +02:00 |
|
Alessandro Ranellucci
|
febd655e22
|
Extrusion of perimeters
|
2011-09-02 21:10:20 +02:00 |
|
Alessandro Ranellucci
|
55a523e1fa
|
Initial import
|
2011-09-01 21:06:28 +02:00 |
|