Alessandro Ranellucci
9bd1b0f6ba
Revert "Refactoring: initialize all layers at once and avoid duplication of slicing height math". #637
...
This reverts commit 08270022dd
2012-08-26 17:47:00 +02:00
Alessandro Ranellucci
08270022dd
Refactoring: initialize all layers at once and avoid duplication of slicing height math
2012-08-25 20:40:44 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Alessandro Ranellucci
1fdbd2c0e1
Suggest repair in non-manifold warning
2012-07-21 12:07:02 +02:00
Alessandro Ranellucci
5c9916dc75
Some basic ability to close holes in non-manifold models
2012-06-06 22:28:23 +02:00
Alessandro Ranellucci
13e10abbbe
Fixed regression causing some models not to be sliced correctly. #410
2012-06-06 18:57:46 +02:00
Alessandro Ranellucci
16b774603c
Accept either absolute or relative values for --first-layer-height. #151
2012-06-06 16:11:38 +02:00
Mark Hindess
2689f49ef8
Remove grep that is effectively repeated.
2012-05-31 18:15:40 +01:00
Alessandro Ranellucci
99b265a89a
Fixed regression causing bad slicing
2012-05-29 17:12:00 +02:00
Alessandro Ranellucci
d8d2f73aff
Fixed regression causing fatal errors with many objects. #394
2012-05-29 14:54:20 +02:00
Alessandro Ranellucci
e383d5e02d
Move struct format to constant
2012-05-28 20:29:51 +02:00
Alessandro Ranellucci
34e3dfdb08
Large memory savings (down to about 50%) for high-res input files
2012-05-28 19:58:27 +02:00
Alessandro Ranellucci
fbe70ac15b
Remove debugging statement
2012-05-20 11:08:44 +02:00
Alessandro Ranellucci
3c8dbcef4a
Do not store normals and save a lot of memory
2012-05-20 11:05:16 +02:00
Mark Hindess
5a16756aac
Avoid undef errors while keeping the debug so root cause can be found.
2012-05-10 22:23:24 +01:00
Mark Hindess
9d85a19b9d
Rework fix to use undef correctly.
2012-05-10 19:07:20 +01:00
Mark Hindess
5ebf6a71cd
Add FE_NONE with value 0 and increment FE_TOP and FE_BOTTOM to simplify
...
and correct logic.
2012-05-09 19:57:00 +01:00
Alessandro Ranellucci
8e0e6107a3
Fixed regression causing manifoldness warnings (and sporadic bad slicing), introduced with recent memory optimizations
2012-05-02 15:12:24 +02:00
Alessandro Ranellucci
f063d100f4
Fixed regression caused about recent memory optimizations
2012-05-01 15:12:34 +02:00
Alessandro Ranellucci
ee33d570d7
Use Douglas-Peucker simplification always and remove the inefficient parallel lines merging algorithm. #277
2012-05-01 11:41:08 +02:00
Alessandro Ranellucci
a165ad4ecb
Large memory saving and speed boost
2012-05-01 10:53:52 +02:00
Alessandro Ranellucci
61e257388a
Button to split loaded objects
2012-05-01 00:30:46 +02:00
Alessandro Ranellucci
2a067ae41f
Export STL
2012-04-30 17:10:54 +02:00
Alessandro Ranellucci
d03925a18d
New GUI with plating facilities
2012-04-30 14:56:01 +02:00
Alessandro Ranellucci
ed4a5739f6
Multiple objects autoplating (--merge, from command line only)
2012-04-29 12:51:20 +02:00
Alessandro Ranellucci
d51ba94e8a
Remove XXX from dependencies
2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
68b48fa807
Multithreaded mesh processing. #154
2012-04-09 12:29:47 +02:00
Alessandro Ranellucci
0afb5ad9dd
Bugfix: some holes were filled. #291
2012-04-02 11:40:12 +02:00
Alessandro Ranellucci
f380b1007d
Add the coordinates of the first non-manifold edge to the warning message. #292
2012-03-31 19:15:30 +02:00
Alessandro Ranellucci
69942d2076
Bugfix: certain values of first layer height ratio caused slicing errors
2012-03-11 16:31:39 +01:00
Alessandro Ranellucci
0e1d89376e
Minor refactoring
2012-03-04 13:39:14 +01:00
Alessandro Ranellucci
6f9cefe001
Reduce computational complexity of make_loops() => speed boost
2012-03-04 13:32:20 +01:00
Alessandro Ranellucci
ae35df716f
Little refactoring, new TriangleMesh->align_to_origin method
2012-02-20 11:47:21 +01:00
Alessandro Ranellucci
23156f0abe
Fix slicing error. #180
2012-02-19 17:18:50 +01:00
Alessandro Ranellucci
e0e2023a5a
Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179
2012-02-19 10:48:58 +01:00
Alessandro Ranellucci
a9e7204fc6
New slicing algorithm based on a topological approach rather than numeric. It should be much more robust
2012-02-18 20:36:14 +01:00
Alessandro Ranellucci
16850b63ed
Removed some useless and manifoldness warnings
2012-02-17 16:31:39 +01:00
Alessandro Ranellucci
f814ccf062
Refactoring: use indexed vertices
2012-02-17 13:56:17 +01:00
Alessandro Ranellucci
669341cd11
New utility script to split STL plates into individual STL files
2012-01-28 15:05:42 +01:00
Alessandro Ranellucci
debdd164e2
Bugfix: fatal error and warnings removed when cleaning some dirty layers
2012-01-21 18:44:24 +01:00
Alessandro Ranellucci
c5b6787a19
Print the number of bogus holes to debug output
2012-01-21 11:24:26 +01:00
Alessandro Ranellucci
98a8c64ed7
Extended (and fixed) unit testing to track down (and fix) an issue caused by floating point math that reversed some holes into contours when they should actually be ignored
2011-12-22 11:24:46 +01:00
Alessandro Ranellucci
2e013e72e8
Bugfix: models located very far from XYZ origin were incorrectly placed on the print area
2011-12-15 19:40:32 +01:00
Alessandro Ranellucci
3c2b2cfef2
Bugfix: duplicate options did not work correctly for copies > 2. #113
2011-12-12 17:32:45 +01:00
Alessandro Ranellucci
99c1facec6
Bugfix: division by zero when nothing in a single layer could be parsed. #100
2011-12-07 20:18:12 +01:00
Alessandro Ranellucci
b79ae44e3d
Recent changes made Slic3r less tolerant with dirty STL files. Now we are able again to slice Prusa parts. #16
2011-12-04 19:10:43 +01:00
Alessandro Ranellucci
b03afc7f1c
Bugfix: some bridges were not detected correctly. #57
2011-11-30 20:32:28 +01:00
Alessandro Ranellucci
71c359bb29
Cleaning recent changes
2011-11-30 17:48:00 +01:00
Alessandro Ranellucci
42383dec84
Warn about models with overlapping or intersecting facets but try to repair wrong layers. #16
2011-11-30 16:28:09 +01:00
Alessandro Ranellucci
d51a37a0ae
Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16
2011-11-30 16:07:31 +01:00
