Alessandro Ranellucci
896641cb7e
Fixed regression causing some bridges not to be detected correctly. #629
2012-08-25 20:04:29 +02:00
Alessandro Ranellucci
65b11fa850
Minor refactoring for better readability of perimeter generation logic
2012-08-24 21:58:51 +02:00
Alessandro Ranellucci
92518d28fc
New option to configure the threshold for enforcing solid infill. #224
2012-08-24 19:38:36 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Alessandro Ranellucci
67b415a2b3
Remove almost duplicated logic for small infill regions detection
2012-07-22 21:06:19 +02:00
Alessandro Ranellucci
1d04e15b63
Refactor/clean up. Merge remove_small_surfaces() into prepare_fill_surfaces(), rename infill_every_layers() to combine_infill(), remove $layer->fill_boundaries, initialize layer properties explicitely for clarity.
2012-07-22 21:00:02 +02:00
Alessandro Ranellucci
3edf42e98e
Little workflow simplification
2012-07-21 15:53:38 +02:00
Alessandro Ranellucci
f899deb6b6
Prevent internal infill at all when fill density is set to zero. #545
2012-07-21 14:41:21 +02:00
Alessandro Ranellucci
bce2663ed8
Restore thin walls and thin fills after last commit
2012-07-20 15:02:25 +02:00
Alessandro Ranellucci
1697cb24a6
Memory optimization and code cleanup. Don't keep deserialized paths
2012-07-20 14:39:56 +02:00
Alessandro Ranellucci
3714fbe0f9
Fixed regression causing random extrudates outside the object perimeter
2012-07-04 10:35:42 +02:00
Alessandro Ranellucci
566a0456ca
Fixed regression causing objects to be 0.1mm larger. #495 #507
2012-07-03 20:34:19 +02:00
Alessandro Ranellucci
c4b9a6cf61
Bugfix: flow wasn't adjusted for perimeters when a custom perimeters extrusion width was applied
2012-07-01 18:13:48 +02:00
Alessandro Ranellucci
96a3234eaa
Different speed for external perimeters. #488
2012-06-27 19:42:16 +02:00
Alessandro Ranellucci
ac08cf7469
Disable arc compensation code
2012-06-23 20:19:58 +02:00
Alessandro Ranellucci
44c636aea1
Do not oversimplify outer perimeters and keep the full resolution of the input file. #340 #462
2012-06-23 20:08:08 +02:00
Alessandro Ranellucci
ca8a91b2b0
Only apply arc compensation to circular holes. #418
2012-06-14 15:06:22 +02:00
Alessandro Ranellucci
c0c53c4397
Fill gaps. #281
2012-06-07 15:31:51 +02:00
Alessandro Ranellucci
85ef7ce665
Bugfix: many thin walls were not detected correctly. #313
2012-06-06 21:27:39 +02:00
Alessandro Ranellucci
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
16b774603c
Accept either absolute or relative values for --first-layer-height. #151
2012-06-06 16:11:38 +02:00
Alessandro Ranellucci
2c28d2f874
Bugfix: with 0 solid layers, no infill was generated at all on fist and last layer. #325
2012-05-22 12:24:48 +02:00
Alessandro Ranellucci
494f4f94bf
After recent memory optimizations, no solid layers were made when using fill density == 0
2012-05-20 17:28:53 +02:00
Alessandro Ranellucci
12c6e39837
Bugfix: hole compensation was making holes too large. #348
2012-05-19 23:12:21 +02:00
Alessandro Ranellucci
fa4f2c8b97
New option to randomize starting points across layers
2012-05-19 22:36:29 +02:00
Alessandro Ranellucci
b246480535
Massive reduction of memory usage (down to one third).
2012-05-19 17:57:38 +02:00
Alessandro Ranellucci
882a022e3a
Even more constants, less memory, more speed
2012-05-19 16:04:33 +02:00
Alessandro Ranellucci
aa9563f00b
More constants, less strings => ess memory usage
2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
4bffa9cb6b
Use perimeter length, not area, to detect small perimeters. #355
2012-05-14 00:30:52 +02:00
Alessandro Ranellucci
edbdc5ec55
New automatic detection of additional required perimeters for better quality with domes and sloping walls. #198
2012-05-05 16:36:10 +02:00
Alessandro Ranellucci
dde71418d4
Bugfix: skip arc compensation when holes are not round
2012-05-02 16:28:47 +02:00
Alessandro Ranellucci
d164d13517
Bugfix: arc compensation code was filling some small holes
2012-05-01 19:19:31 +02:00
Alessandro Ranellucci
710275f7c0
Reverse perimeter order for holes. #214
2012-05-01 15:33:24 +02:00
Alessandro Ranellucci
da43cd70b2
Prevent tiny extrusion points. #323
2012-05-01 15:25:35 +02:00
Alessandro Ranellucci
21893efa68
Removed a debugging statement left in, preventing hole compensation
2012-05-01 15:09:32 +02:00
Alessandro Ranellucci
ee33d570d7
Use Douglas-Peucker simplification always and remove the inefficient parallel lines merging algorithm. #277
2012-05-01 11:41:08 +02:00
Alessandro Ranellucci
a165ad4ecb
Large memory saving and speed boost
2012-05-01 10:53:52 +02:00
Alessandro Ranellucci
ed4a5739f6
Multiple objects autoplating (--merge, from command line only)
2012-04-29 12:51:20 +02:00
Alessandro Ranellucci
96d5e513b8
Rename $Slic3r::resolution to $Slic3r::scaling_factor
2012-04-16 14:05:38 +02:00
Alessandro Ranellucci
d51ba94e8a
Remove XXX from dependencies
2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
1845abab70
Bugfix: warnings when trying to process bridges with no anchors
2012-04-12 10:30:54 +02:00
Alessandro Ranellucci
70e69be60a
Bugfix: support material was generated under most bridges
2012-02-25 21:39:01 +01:00
Alessandro Ranellucci
375829204f
Removed the bogus hole code which is not necessary anymore. Also fixes #160
2012-02-19 16:02:58 +01:00
Alessandro Ranellucci
7b67fae686
Support material
2012-02-19 12:03:36 +01:00
Alessandro Ranellucci
eb33c03926
Bugfix: flow wasn't adjusted for first layer according to its height setting. #182
2012-01-30 14:03:12 +01:00
Alessandro Ranellucci
c5b6787a19
Print the number of bogus holes to debug output
2012-01-21 11:24:26 +01:00
Alessandro Ranellucci
d1ad02cc71
Removed one more fatal error caused by recent refactoring
2012-01-18 19:28:49 +01:00
Alessandro Ranellucci
bba91fc0a5
Some better debug messages and a note about self-intersecting polygons. #160
2012-01-18 18:59:34 +01:00
Alessandro Ranellucci
90d10b24a8
Fill gaps using medial axis detection
2012-01-12 22:05:35 +01:00
