Alessandro Ranellucci
fc0fa0c738
Remove Rectilinear2 infill
2012-04-16 14:06:52 +02:00
Alessandro Ranellucci
96d5e513b8
Rename $Slic3r::resolution to $Slic3r::scaling_factor
2012-04-16 14:05:38 +02:00
Alessandro Ranellucci
d51ba94e8a
Remove XXX from dependencies
2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
356e750cf4
Bugfix: support material was oversimplifying the first outer perimeter. #314
2012-04-16 13:48:55 +02:00
Alessandro Ranellucci
0d910dec84
Don't require --duplicate-distance to be positive anymore
2012-04-16 11:58:01 +02:00
Alessandro Ranellucci
cb182b8bc2
Honeycomb infill. #300
2012-04-16 11:55:14 +02:00
Alessandro Ranellucci
0faebad4da
Make new support material algorithm effective
2012-04-14 19:47:33 +02:00
Alessandro Ranellucci
9c991d15d1
Don't ask for confirmation (and reset values) when duplicate is set to 'no'. #311
2012-04-14 15:37:28 +02:00
Alessandro Ranellucci
c0ec8b5865
Bugfix: fatal error under certain circumstances introduced with the recent Boost implementation
2012-04-14 15:25:42 +02:00
Alessandro Ranellucci
1845abab70
Bugfix: warnings when trying to process bridges with no anchors
2012-04-12 10:30:54 +02:00
Alessandro Ranellucci
74c02e7aed
added skirt to print size calculation for --duplicate
...
Conflicts:
lib/Slic3r/Print.pm
2012-04-11 20:44:09 +02:00
Alessandro Ranellucci
0460830372
Merge pull request #310 from triffid/fix-total-x-length
...
move duplicate stuff around a bit
2012-04-11 10:34:41 -07:00
Michael Moon
757f8a2404
move duplicate stuff around a bit
2012-04-12 03:30:15 +10:00
Alessandro Ranellucci
1c6469fc25
Allow to use x as a separator for --print-center, --bed-size, --duplicate-grid
2012-04-11 18:18:01 +02:00
Alessandro Ranellucci
134595fc99
Validation for --duplicate-grid and --bed-size
2012-04-11 17:52:06 +02:00
Alessandro Ranellucci
0b29ad123e
Honor duplication options for SVG export
2012-04-11 17:46:36 +02:00
Alessandro Ranellucci
e5abb0b9df
Enable/disable duplication controls
2012-04-11 17:40:10 +02:00
Alessandro Ranellucci
e58ed195fd
New --bed-size option
2012-04-11 16:30:58 +02:00
Alessandro Ranellucci
d96d0a9fbf
New slic3r: namespace for SVG output
2012-04-11 16:10:51 +02:00
Alessandro Ranellucci
4ae551a424
Ditch --duplicate-x and --duplicate-y, add --duplicate-grid
2012-04-11 15:58:09 +02:00
Alessandro Ranellucci
63ff01764c
Document --threads, -j and throw an error when it's used on a non-threaded perl
2012-04-10 16:26:56 +02:00
Alessandro Ranellucci
fc76104aa7
Merge branch 'boost-geometry'
2012-04-10 15:52:44 +02:00
Alessandro Ranellucci
a8adff53ca
New implementation of support material
2012-04-09 22:06:30 +02:00
Alessandro Ranellucci
82a16ed8ee
Merge branch 'triffid-duplicate'
2012-04-09 15:14:40 +02:00
Michael Moon
f2edfd1a76
initial implementation of algorithm for #249
...
fix typo that put things in the wrong position
use int() builtin instead of POSIX::floor()
fix typo
use alternate method of creating local routines
remove aliases for new duplicate option
use coderefs for linear interpolate function, make binary insertion sort inline
add \n at end of die message regarding too many objects for print area
fix case where no duplication is done
fix whitespace according to slic3r coding style
assume 200x200 bed area if center is 0,0
Some cleanup to the autoarrange duplication logic
2012-04-09 15:14:07 +02:00
Alessandro Ranellucci
64e669d893
Refactored parallelization code. #154
2012-04-09 13:53:13 +02:00
Alessandro Ranellucci
68b48fa807
Multithreaded mesh processing. #154
2012-04-09 12:29:47 +02:00
Alessandro Ranellucci
5bfe19a8b9
Huge speed Boost (pun intended). Also fixes a problem where infill was escaping perimeters sometimes ( #305 ).
2012-04-09 11:04:32 +02:00
Alessandro Ranellucci
a800b97fdd
Bugfix: no-extrusion was ignored
2012-04-08 21:27:38 +02:00
Alessandro Ranellucci
19dc69dd74
New icon
2012-04-07 20:45:59 +02:00
Alessandro Ranellucci
43ebaa9d94
Don't slow down travel moves. #293
2012-04-03 14:22:18 +02:00
Alessandro Ranellucci
965a4e1bfd
Make sure all concentric fill loops are extruded ccw. #298
2012-04-03 14:11:12 +02:00
Alessandro Ranellucci
13e573a8e4
Only output M109 if there's none in user-supplied start G-code
2012-04-03 12:50:06 +02:00
Alessandro Ranellucci
0afb5ad9dd
Bugfix: some holes were filled. #291
2012-04-02 11:40:12 +02:00
Alessandro Ranellucci
f380b1007d
Add the coordinates of the first non-manifold edge to the warning message. #292
2012-03-31 19:15:30 +02:00
Alessandro Ranellucci
d791315b4a
Bugfix: fatal error when generating skirt for layers having only two-point thin walls. #295
2012-03-31 18:32:53 +02:00
Alessandro Ranellucci
1355833cbf
Use M109 for Makerbot bed control. #294
2012-03-31 18:24:12 +02:00
Alessandro Ranellucci
e3a9adae4d
Bugfix: use P instead of S for Mach3 for M106 too. #286
2012-03-27 10:26:10 +02:00
Henrik Brix Andersen
d538382669
Use correct spelling for G-code.
2012-03-26 22:33:43 +02:00
Alessandro Ranellucci
2aa786c95f
Bugfix: extrude_skirt() was assuming that a copy existed at 0,0 (not harmful but incorrect)
2012-03-26 19:47:21 +02:00
Alessandro Ranellucci
32c46f0ea3
SVG export
2012-03-26 17:57:54 +02:00
Alessandro Ranellucci
5bd16ffed6
Allow decimal values for skirt/duplicate distances and speeds. #283
2012-03-26 15:20:59 +02:00
Alessandro Ranellucci
4d71ca3071
Enable G0 automatically for Mach3. #266
2012-03-26 12:22:12 +02:00
Alessandro Ranellucci
1a06e35687
New option to specify G-code to be used at layer change. #279
2012-03-26 12:14:15 +02:00
Alessandro Ranellucci
bf964b5273
Allow perimeters = 0. #282
2012-03-26 11:32:59 +02:00
Erkki Seppälä
0ca7577392
Added a Reslicing-function to the File menu.
2012-03-12 19:52:23 +02:00
Alessandro Ranellucci
30df2342d4
UTF-8 characters not displayed correctly on Windows
2012-03-11 19:59:09 +01:00
Alessandro Ranellucci
0f5e2e3076
Throw an error if a user wants to print a 0mm layer
2012-03-11 16:58:15 +01:00
Alessandro Ranellucci
69942d2076
Bugfix: certain values of first layer height ratio caused slicing errors
2012-03-11 16:31:39 +01:00
Alessandro Ranellucci
64892c2203
Bugfix: fatal error on some models. #255
2012-03-10 23:49:24 +01:00
