3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,850 Commits 1 Branch 1 Tag 249 MiB
feb269c97c
Commit Graph

423 Commits

Author SHA1 Message Date
Alessandro Ranellucci
7ac0095018 Fix regression causing default extrusion width to be ignored. #1958 2014-04-25 19:39:27 +02:00
Alessandro Ranellucci
fe1691c151 New --cut feature 2014-04-25 10:20:30 +02:00
Alessandro Ranellucci
f6e99f1467 Bugfix: [filament_preset] was not replaced in filename when using Quick Slice. #1870 2014-04-19 12:10:15 +02:00
Alessandro Ranellucci
62e19469bc Fixed regression in --infill-only-where-needed. Includes a minimal test suite for such feature. #1871 
Conflicts:

	t/fill.t
 2014-04-18 21:48:32 +02:00
Alessandro Ranellucci
93a7d87fc6 Bugfix: pillars support material crashed when no overhangs were detected 2014-04-07 16:59:22 +02:00
Alessandro Ranellucci
20df1023a6 Fixed broken command line scaling. Regression test was in previous commit. #1889 2014-04-05 11:22:05 +02:00
Alessandro Ranellucci
d6d6a51e0d Fix for incomplete extrusion on solid surfaces 2014-04-05 10:54:24 +02:00
Alessandro Ranellucci
45559f87f3 Save the vector used for aligning object volumes to origin and apply it to additional parts added from the object part panel in order to make them coincide 2014-04-02 20:23:26 +02:00
Alessandro Ranellucci
432a87e73d New option for forcing the generation of interface shells. #1847 2014-03-25 01:11:28 +01:00
Alessandro Ranellucci
ea3266c6e9 Fix modifiers 2014-03-23 16:56:41 +01:00
Alessandro Ranellucci
fec41d6dfd Update plater and print upon changing object parts and their settings 2014-03-23 16:45:55 +01:00
Alessandro Ranellucci
6a157c22c2 Fixed minor fatal error 2014-03-22 17:44:42 +01:00
Alessandro Ranellucci
7421a7bf63 Turn fill_density into percentage 2014-03-22 16:23:33 +01:00
Alessandro Ranellucci
e837183327 Fixed regression when using --infill-only-where-needed. Includes regression test. #1721 2014-02-16 12:48:07 +01:00
Alessandro Ranellucci
ffc891d885 Bugfix: when processing with fill_density = 0, top/bottom solid shells were missing regions thinner than 3 * extrusion width. Includes regression test. #1602 
Conflicts:

	lib/Slic3r/Print/Object.pm
	t/fill.t
 2014-02-07 02:07:21 +01:00
Alessandro Ranellucci
89d3dbaa5a Bugfix: incorrect number of raft layers was generated when too few were requested. #1678 
Conflicts:

	lib/Slic3r/Print/Object.pm
 2014-01-11 23:26:48 +01:00
Alessandro Ranellucci
ea173cf815 Bugfix: ambiguous semantics of the layers_count() method caused M73 to go beyond 100%. #1670 
Conflicts:

	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
 2014-01-11 17:40:09 +01:00
Alessandro Ranellucci
c8a48b4527 Implement modifier volumes and port _merge_loops() to XS 2014-01-07 15:40:38 +01:00
Alessandro Ranellucci
b17d06f9d1 Finished porting BoundingBox to XS 2014-01-07 12:48:09 +01:00
Alessandro Ranellucci
3e93a14912 New support material pattern: pillars! 2014-01-05 16:51:16 +01:00
Alessandro Ranellucci
07b9b12475 Make tests pass 2014-01-05 00:36:33 +01:00
Alessandro Ranellucci
a2cbb261cb More work for refactoring Flow/Extruder 2014-01-03 20:02:00 +01:00
Alessandro Ranellucci
8ed738d3f7 More incomplete work for Flow/Extruder refactoring 2014-01-03 18:27:46 +01:00
Alessandro Ranellucci
52ce6e4a7b Some initial work for refactoring Print->extruders 2014-01-03 10:44:36 +01:00
Alessandro Ranellucci
b9793b3f12 Moved first_layer_extrusion_width to PrintConfig 2014-01-03 00:34:30 +01:00
Alessandro Ranellucci
bfa2ee2770 Remove scale, rotate, duplicate, duplicate_grid from config (but leave them in CLI) 2014-01-02 18:01:21 +01:00
Alessandro Ranellucci
385e0e0974 Refactoring: new Slic3r::Print::Simple class for non-interactive slicing (used in CLI and Quick Slice) 2014-01-02 17:54:18 +01:00
Alessandro Ranellucci
5bf0942f45 Satisfy test suite and CLI 2014-01-02 17:24:23 +01:00
Alessandro Ranellucci
e2f1040a76 More work 2014-01-02 10:44:54 +01:00
Alessandro Ranellucci
0883d0f4eb More work here and there 2014-01-01 17:29:15 +01:00
Alessandro Ranellucci
83326845dd More incomplete work 2013-12-31 14:33:03 +01:00
Alessandro Ranellucci
beb1baa096 Incomplete work for refactoring regions and flows 2013-12-30 18:28:41 +01:00
Alessandro Ranellucci
1157a7f859 Remove package variable $Slic3r::Config 2013-12-24 11:29:31 +01:00
Alessandro Ranellucci
20f1f3d2b4 Fix regression preventing raft from being generated for the entire object footprint. #1614 #1567 2013-12-23 20:31:50 +01:00
Alessandro Ranellucci
1b9079ffbe Merge branch 'xs-model' 2013-12-20 01:41:13 +01:00
Alessandro Ranellucci
a6a6a6888b Ported Slic3r::Print::State to XS 2013-12-20 01:36:42 +01:00
Alessandro Ranellucci
d2295cdf70 New Slic3r::Print::State class 2013-12-19 18:54:24 +01:00
Alessandro Ranellucci
685e8e4dfa More work for step-based slicing 2013-12-19 15:23:10 +01:00
Alessandro Ranellucci
38ea5f79d7 Merge branch 'xs-model' 2013-12-18 19:20:23 +01:00
Alessandro Ranellucci
15235699e4 Completed adapting plater behavior to new Print object API 2013-12-18 18:54:11 +01:00
Alessandro Ranellucci
916a0a0e58 Fix compilation and test suite 2013-12-18 16:34:31 +01:00
Alessandro Ranellucci
a12b1765d6 Fixed wrong commit f495136. Thanks pdbogen for the report. #1623 2013-12-18 10:21:17 +01:00
Alessandro Ranellucci
0591eecab7 Lazy mesh generation so that we only keep it in model object 2013-12-18 00:13:41 +01:00
Alessandro Ranellucci
f4951367ea Fixed fatal error about missing method thin_walls(). #1607 #1615 2013-12-17 16:17:15 +01:00
Alessandro Ranellucci
250608aa52 Move centering outside the Print object 2013-12-15 16:17:12 +01:00
Alessandro Ranellucci
2eff7c238e Some initial work for stateful Print object 2013-12-13 14:02:01 +01:00
Alessandro Ranellucci
5470fbbebc Make quick_slice() work with new model handling 2013-12-13 12:18:30 +01:00
Alessandro Ranellucci
0e8a0ef1ca Refactoring. Use Model class for representing the plate in GUI 2013-12-12 20:19:33 +01:00
Alessandro Ranellucci
57fd6ad563 Removed dependency on ->object from Region.pm 2013-11-26 18:46:48 +01:00
Alessandro Ranellucci
0045f84ed2 Removed chained_path_points() 2013-11-23 21:42:01 +01:00
Alessandro Ranellucci
e75dbf37fa Never scale TriangleMesh objects 2013-11-23 19:25:33 +01:00
Alessandro Ranellucci
a331f4d27a Finished porting group() to XS 2013-11-23 18:15:59 +01:00
Alessandro Ranellucci
7475762a27 Remove residual uses of Boost for line clipping 2013-11-21 18:47:25 +01:00
Alessandro Ranellucci
c5f7318fc9 Removed debugging statement 2013-11-20 15:38:51 +01:00
Alessandro Ranellucci
50c0081d25 Update Clipper to 6.0.0 2013-11-20 11:35:58 +01:00
Alessandro Ranellucci
ab3e5b5a2c No support when --support-material-interface-layers was set to 1. #1515 2013-11-14 18:13:57 +01:00
Alessandro Ranellucci
885ab5844e Ported regular_points() to XS and renamed it to equally_spaced_points() 2013-11-11 20:59:58 +01:00
Alessandro Ranellucci
6bb425e88d Minor fix about raft and support after previous commit 2013-11-11 20:50:22 +01:00
Alessandro Ranellucci
9f41f0279e Some work to reduce recursive dependencies between classes 2013-11-11 20:37:06 +01:00
Alessandro Ranellucci
f491b7ba71 Fix t/support.t 2013-11-02 11:32:23 +01:00
Alessandro Ranellucci
3f7adfc07d Fix raft_layers according to the new support material logic 2013-11-02 11:16:44 +01:00
Alessandro Ranellucci
ff25cc97fa Explicitely clip support material with object slices (test case from #1397) 2013-10-27 23:20:06 +01:00
Alessandro Ranellucci
a99d34a91a Bad memory access in regular_points() 2013-10-27 20:55:55 +01:00
Alessandro Ranellucci
58d92ac36a Support interface_layers == 0 2013-10-27 18:54:52 +01:00
Alessandro Ranellucci
0e3c9ebe52 Extend interface into base support when the latter is contained in a hole (for better interface anchoring) and fix contact loops when object is enclosed in a hole 2013-10-27 16:37:04 +01:00
Alessandro Ranellucci
4cba5111a3 Fix generation of contact loops 2013-10-27 15:22:44 +01:00
Alessandro Ranellucci
28e9682d0e Several changes to support material, including a fix to prevent vertical overlapping and horizontal fusion of support and object 2013-10-27 10:19:26 +01:00
Alessandro Ranellucci
c08d4cc798 Fixed support unit tests and reduced dependency on $object 2013-10-26 17:56:59 +02:00
Alessandro Ranellucci
bdf825d078 Refactoring: split support material code into several methods 2013-10-26 17:20:54 +02:00
Mark Hindess
f523c095b1 Trivial fix for support-related undefined sub errors. 2013-09-24 09:54:23 +01:00
Alessandro Ranellucci
197cd8e68b Typo 2013-09-19 16:09:47 +02:00
Alessandro Ranellucci
ed529b62f3 Fix threading issue with GUI. #1443 #1444 2013-09-19 16:00:47 +02:00
Alessandro Ranellucci
4fe0675380 Removed ZTable code 2013-09-17 23:55:38 +02:00
Alessandro Ranellucci
a7989e382c Bugfix: enabling raft layers generated support for the whole model. Includes regression test. #1375 2013-09-17 23:51:30 +02:00
Alessandro Ranellucci
e8323fc339 Move support material code to its own class 2013-09-17 23:27:57 +02:00
Alessandro Ranellucci
6adce9f66b Update support material code to use shared memory 2013-09-17 23:14:49 +02:00
Alessandro Ranellucci
ea0e136b45 Prevent superfluous extra perimeters added when a region has an acute angle 2013-09-17 20:18:54 +02:00
Alessandro Ranellucci
39449f9245 Revert a recent change made to shells generation, causing too much solid infill. Includes regression test. #1431 2013-09-17 19:24:16 +02:00
Alessandro Ranellucci
c7db2cb10f Prune tiny shells to avoid random extra internal solid infill. #1431 2013-09-16 12:36:04 +02:00
Alessandro Ranellucci
a821eb7f3c More work to avoid working with vertices outside XS 2013-09-11 11:55:08 +02:00
Alessandro Ranellucci
566d38a472 Replace TriangleMesh with the XS port 2013-09-10 00:40:46 +02:00
Alessandro Ranellucci
5e34a9cf21 Make Repair() idempotent and lowercase 2013-09-09 23:18:33 +02:00
Alessandro Ranellucci
1b9d2e2ef8 Use the XS slicing code 2013-09-09 18:21:10 +02:00
Alessandro Ranellucci
873762491b Fix a bad access after recent change about ->p returning objects by reference 2013-09-09 17:10:54 +02:00
Alessandro Ranellucci
8607c559c7 Minor tidying 2013-09-07 00:42:56 +02:00
Alessandro Ranellucci
09684c67c2 Optimization: Remove useless calls to union() 2013-09-07 00:28:53 +02:00
Alessandro Ranellucci
10ab3bbb86 Fix Only infill where needed putting insufficient material. #1412 2013-09-07 00:02:58 +02:00
Alessandro Ranellucci
907ba55aab Some minor fixes needed after the xsdata merge. #1421 2013-09-06 22:52:56 +02:00
Alessandro Ranellucci
f104659020 Optimization 2013-09-06 19:21:38 +02:00
Alessandro Ranellucci
e02ae0d18a Return Surface objects by reference from SurfaceCollection objects and fix a bug in XS code causing some shell options to be ignored 2013-09-06 18:36:38 +02:00
Alessandro Ranellucci
cb677c45de Don't grow horizontal shells having acute angles. #1387 2013-09-06 17:43:40 +02:00
Alessandro Ranellucci
67aefdccc7 Fixed --avoid-crossing-perimeters and --support-material after the xsdata merge 2013-09-04 00:10:53 +02:00
Alessandro Ranellucci
a49dc603cc Many changes and fixes to remove leaks and return objects by reference 2013-09-03 19:26:58 +02:00
Alessandro Ranellucci
fb763b0187 Removed dependency on Math::Clipper 2013-08-27 01:26:44 +02:00
Alessandro Ranellucci
fe42427a54 Ported Polygon->is_valid() and ExPolygon->is_valid() 2013-08-26 23:27:51 +02:00
Alessandro Ranellucci
da0b85c0d9 Ported ExPolygon->contour and ExPolygon->holes 2013-08-26 23:09:18 +02:00
Alessandro Ranellucci
494ed5c5ad Minor optimization (group offset_ex calls) 2013-08-26 22:54:06 +02:00
Alessandro Ranellucci
fc9cec9d81 Merge branch 'master' into xsdata 
Conflicts:
	lib/Slic3r/Layer/Region.pm
	lib/Slic3r/Print/Object.pm
 2013-08-25 19:59:42 +02:00
Alessandro Ranellucci
026e0c06e4 Ability to customize how materials are mapped to extruders. #1020 2013-08-25 19:52:32 +02:00
Alessandro Ranellucci
3d6fb1b05c New feature: ability to override specific settings for individual objects in the plater. #344 2013-08-25 14:37:50 +02:00
Alessandro Ranellucci
fa07c512b4 Merge branch 'master' into xsdata 
Conflicts:
	lib/Slic3r/Layer/Region.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
 2013-08-16 09:09:56 +02:00
Alessandro Ranellucci
2b36778dc1 Fix a situation where extra perimeters prevented top shell to be fully propagated. #1387 2013-08-13 09:45:33 +02:00
Alessandro Ranellucci
f1922ce7b3 Fix regression causing lack of contact infill 2013-08-12 19:19:22 +02:00
Alessandro Ranellucci
e5fe04ea7a Make sure teeth are not too tight 2013-08-12 19:10:40 +02:00
Alessandro Ranellucci
9513fa7600 Enforce some horizontal margin between object and interface/support (contact not affected) 2013-08-12 18:55:11 +02:00
Alessandro Ranellucci
ca7d4163d7 Remove jitter and overlaps in interface infill 2013-08-12 18:45:03 +02:00
Alessandro Ranellucci
7062d028d2 Bugfix: top layers were not detected correctly, causing overlap of support material and object in some situations where there were contact regions having the same Z as some top regions 2013-08-12 18:12:53 +02:00
Alessandro Ranellucci
8d413eda44 Refactoring: generate interface and support in different cycles 2013-08-11 19:25:51 +02:00
Alessandro Ranellucci
5f07d39509 Reapply perimeter only to support 2013-08-10 21:30:50 +02:00
Alessandro Ranellucci
5380b6cb33 Incomplete work to improve support material by avoiding thin columns and making sure everything is supported correctly 2013-08-10 19:39:35 +02:00
Alessandro Ranellucci
abb5d1256f Added some debugging code 2013-08-09 21:27:57 +02:00
Alessandro Ranellucci
5d80c26b29 Adjust collision detection for brim and include support islands inside the only_retract_when_crossing_perimeters logic 2013-08-09 15:04:14 +02:00
Alessandro Ranellucci
f6569cf359 Minor error causing support material to fail when first_layer_height was expressed in % (caught by regression test). #1371 2013-08-08 14:41:23 +02:00
Alessandro Ranellucci
b38cc2c244 Merge branch 'master' into xsdata 
Conflicts:
	lib/Slic3r.pm
	lib/Slic3r/ExPolygon.pm
	lib/Slic3r/Fill.pm
	lib/Slic3r/Fill/Rectilinear.pm
	lib/Slic3r/GCode.pm
	lib/Slic3r/GUI/Plater.pm
	lib/Slic3r/Geometry/Clipper.pm
	lib/Slic3r/Layer/Region.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
	lib/Slic3r/TriangleMesh.pm
	t/shells.t
	xs/MANIFEST
 2013-08-08 02:10:34 +02:00
Alessandro Ranellucci
d8e2cde962 Avoid problems caused in support material by layer heights being specified in configuration without the leading 0 (like .25). #1366 2013-07-31 23:44:17 +02:00
Alessandro Ranellucci
1b4878f305 Fix hang in new support material caused by numerical approximation leaving small polygons, as usual 2013-07-30 15:44:08 +02:00
Alessandro Ranellucci
913f401280 Merge new-support2 2013-07-29 20:50:26 +02:00
Alessandro Ranellucci
51de3ce14f Switch print_z to unscaled coordinates 2013-07-29 00:27:53 +02:00
Alessandro Ranellucci
691c45d57f Smarter handling of hollow prints. Optimization included 2013-07-28 10:56:41 +02:00
Alessandro Ranellucci
25af3eb35f Proper fix for preventing shells to propagate too much 2013-07-27 19:41:36 +02:00
Alessandro Ranellucci
6bd4803612 Failing test case about spurious infill in hollow objects, caused by shells being correctly generated even for hollow objects - however sometimes we don't want that 2013-07-26 20:17:33 +02:00
Alessandro Ranellucci
b1147861dd Implement lower_bound() and upper_bound() methods for ZTable 2013-07-20 21:19:59 +02:00
Alessandro Ranellucci
1b285f3f46 Thread-safe integration of ExtrusionPath::Collection 2013-07-18 22:29:12 +02:00
Alessandro Ranellucci
c7b6818ccf Ported offset() and offset2() 2013-07-17 00:48:29 +02:00
Alessandro Ranellucci
bf8c799685 Ported diff_ex, intersection_ex, union_ex, xor_ex 2013-07-17 00:29:09 +02:00
Alessandro Ranellucci
898007fc36 Port offset_ex() and offset2_ex() to XS 2013-07-16 20:09:53 +02:00
Alessandro Ranellucci
9b582a11ff Adopt XS containers everywhere (incomplete work) 2013-07-16 09:49:34 +02:00
Alessandro Ranellucci
159a009f96 Fix tests here and there 2013-07-15 15:26:56 +02:00
Alessandro Ranellucci
f612d4c64e Ported ExtrusionPath to XS. Failing test for Surface 2013-07-15 12:14:22 +02:00
Alessandro Ranellucci
7534c1e6d9 Use Slic3r::Surface::Collection for Layer::Region->slices 2013-07-14 15:03:45 +02:00
Alessandro Ranellucci
5885be881c New Slic3r::Surface::Collection class 2013-07-14 14:56:43 +02:00
Alessandro Ranellucci
f7967414e0 Store layer slices and region slices as XS data to save memory and make them shared across threads 2013-07-07 12:54:20 +02:00
Alessandro Ranellucci
985af5ee56 Merge branch 'newslice' 2013-07-06 12:16:54 +02:00
Alessandro Ranellucci
86c4f5c5b0 Merge branch 'master' into newslice 2013-06-23 22:23:25 +02:00
Alessandro Ranellucci
de45b823e1 Merge branch 'master' into xs 2013-06-23 21:12:19 +02:00
Alessandro Ranellucci
2d687cd0a0 Only combine internal infill and leave internal-solid as it is. #1248 2013-06-23 18:21:47 +02:00
Alessandro Ranellucci
f3a9d41c70 Cache a Z table for layer range search 2013-06-23 17:07:12 +02:00
Alessandro Ranellucci
37105e8237 Ported get_layer_range() to C 2013-06-23 15:33:07 +02:00
Alessandro Ranellucci
9a904dc88d Lighter implementation of the slicing algorithm to save memory and time 2013-06-23 12:26:40 +02:00
Alessandro Ranellucci
1565560b55 One more little optimization 2013-06-22 20:37:15 +02:00
Alessandro Ranellucci
ac4a0bcdd8 Refactoring: use Slic3r::Geometry::BoundingBox objects everywhere 2013-06-16 12:21:25 +02:00
Alessandro Ranellucci
20158aac0d Merge branch 'issue1161' 2013-06-15 18:08:01 +02:00
Alessandro Ranellucci
878d17605c Ignore solid_infill_every_layers when fill_density is 0. Includes regression test. #1240 2013-06-14 16:48:24 +02:00
Alessandro Ranellucci
d5a9320587 Bugfix: narrow top surfaces didn't generate solid layers. #1161 2013-06-08 17:48:34 +02:00
Alessandro Ranellucci
3ffe98f0c3 Use actual Z to order objects in sequential printing rather than layer count, as layer heights might be different 2013-06-03 21:40:13 +02:00
Alessandro Ranellucci
7134df4638 Only skip objects with no layers without stopping the whole job 2013-06-03 11:39:23 +02:00
Alessandro Ranellucci
8a01cb9e96 Generate a better error when input file is too thin and no layers could be generated. #1127 2013-06-02 19:44:59 +02:00
Alessandro Ranellucci
c62b49d1af Optimization of extra perimeters detection 2013-05-31 14:30:07 +02:00
Alessandro Ranellucci
917915d68e Bugfix: superfluous extra perimeters were generated. #1170 2013-05-31 14:23:42 +02:00
Alessandro Ranellucci
bbb190dc68 Generate infill using each object's bounding_box instead of full print. #1177 2013-05-19 11:35:41 +02:00
Alessandro Ranellucci
08a0bbd7f0 Optimization: split meshes automatically when avoid_crossing_perimeters is enabled, so that we reduce the complexity of the MotionPlanner graphs. This commit includes a very large refactoring of the Model class which is now responsible for duplication and arrangement 2013-05-18 16:48:26 +02:00
Alessandro Ranellucci
c2301c5796 Don't extend solid layers when fill density is 0 2013-04-29 15:55:50 +02:00
Mark Hindess
407de02fe4 Use binary search for get_layer_range. 
Gives a 13% speed up on Teethy_Tiki.stl (thing:49334) with default settings
on my laptop.
When $self->layers->[0]->slice_z == $min_z the returned $min_layer value is
0 rather than the (incorrect?) -1 returned by the old code.
 2013-04-18 19:29:05 +01:00
Alessandro Ranellucci
e088d9b3f7 Cache Slic3r::Fill object 2013-04-18 18:40:59 +02:00
Alessandro Ranellucci
430c825918 Align rectilinear and line infill across layers (new implementation). #712 2013-04-18 17:34:21 +02:00
Alessandro Ranellucci
04d2231901 Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049 2013-03-30 11:22:12 +01:00
Alessandro Ranellucci
1b79b1cb20 Refactoring: use the clone() method for inflating Surface objects 2013-03-29 19:18:06 +01:00
Alessandro Ranellucci
6bc5de0b5d Allow custom ranges with layer_height = 0 2013-03-24 15:26:55 +01:00
Alessandro Ranellucci
0b81911cff Bugfix: artifacts near walls. #1049 2013-03-18 17:55:16 +01:00
Alessandro Ranellucci
8ce31c2a2b Don't exclude any infill under internal bridges; revert infill pattern to rectilinear for internal bridges. #240 2013-03-18 13:32:19 +01:00
Alessandro Ranellucci
1064c9bb2a Merge branch 'master' into grow-narrow 
Conflicts:
	lib/Slic3r/Fill.pm
	lib/Slic3r/Print/Object.pm
 2013-03-17 02:30:20 +01:00
Alessandro Ranellucci
83065b0789 Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value 2013-03-17 01:10:40 +01:00
Alessandro Ranellucci
04c0caad0b Fix honeycomb infill overlap with perimeters 2013-03-17 00:57:58 +01:00
Alessandro Ranellucci
35bd5a3423 New --solid-infill-extrusion-width option 2013-03-17 00:02:31 +01:00
Alessandro Ranellucci
c13d9e9fb3 Don't collapse overhangs too early 2013-03-16 21:51:38 +01:00
Alessandro Ranellucci
0f5064dd32 Untested fix for incomplete honeycomb support material. #1032 2013-03-16 21:10:12 +01:00
Alessandro Ranellucci
25554a345f Reorder object copies using a nearest neighbor search 2013-03-16 20:56:14 +01:00
Alessandro Ranellucci
10b6bc9d15 Removed keep_meshes 2013-03-16 19:39:00 +01:00
Alessandro Ranellucci
f4b8185698 Fixed typo preventing support material to work with new simplify() syntax 2013-03-16 19:11:49 +01:00
Alessandro Ranellucci
33b40eda18 Always fix self-intersecting polygons that Douglas-Peucker might return 2013-03-16 18:42:56 +01:00
Alessandro Ranellucci
0f8ca6191a Merge branch 'master' into grow-narrow 2013-03-16 16:22:03 +01:00
Alessandro Ranellucci
dc0f706789 Bugfix: simplification of support areas could lead to complex polygons with bad orientation, thus causing wrong pattern clipping. #1032 2013-03-14 14:27:08 +01:00
Alessandro Ranellucci
d9b82c79da Grow narrow infill regions into void - to be tested more 2013-03-13 01:03:54 +01:00
Alessandro Ranellucci
6058384978 Fixed regression causing crash when support material threshold angle was defined. #1048 2013-03-12 19:39:43 +01:00
Alessandro Ranellucci
999af84c54 Don't make internal bridges when fill_density == 1. #1045 2013-03-11 18:41:12 +01:00
Alessandro Ranellucci
0eecf33198 Bugfix: narrow solid shells were collapsed when spacing was added before generating infill, so we grow them 2013-03-11 18:37:01 +01:00
Alessandro Ranellucci
b7945ac790 Finished new extra perimeters implementation 2013-03-11 14:23:16 +01:00
Alessandro Ranellucci
74e21d7a04 New implementation of extra perimeters - to test 2013-03-10 19:08:36 +01:00
Alessandro Ranellucci
f670acb4b1 Slice a single object with multiple layer heights. :-) 2013-03-10 14:58:49 +01:00
Alessandro Ranellucci
17cbca5e06 Factor out layer height in support material generation 2013-03-10 12:22:40 +01:00
Alessandro Ranellucci
2ab5fa9c72 Factor out layer height from combine_infill() 2013-03-10 12:08:18 +01:00
Alessandro Ranellucci
2275de9f0d Factored out the layer height logic 2013-03-10 11:37:16 +01:00
Alessandro Ranellucci
36d24ccb0b Infill refactoring and cleanup complete 2013-03-07 15:47:32 +01:00
Alessandro Ranellucci
a9df56670f Bugfix: internal-bridge regions were not touching perimeters 2013-03-05 19:33:06 +01:00
Alessandro Ranellucci
a9090688f9 Refactor bridge flow to Slic3r::Flow::Bridge class 2013-02-27 10:43:50 +01:00
Alessandro Ranellucci
d00c2882c4 Remove debug line slipped into last commit 2013-02-27 10:30:05 +01:00
Alessandro Ranellucci
37be4f7319 Some cleanup for detect_surfaces_type() 2013-02-26 20:52:13 +01:00
Alessandro Ranellucci
f4e8cdbf36 Better logic for extra perimeters 2013-02-26 20:00:05 +01:00
Alessandro Ranellucci
bd76e7677c Adjust extra perimeters 2013-02-24 17:04:19 +01:00
Alessandro Ranellucci
c3dde74776 Fix brim and extra perimeters after recent changes to ->slices 2013-02-24 16:40:14 +01:00
Alessandro Ranellucci
de0c2febd9 Remove useless lines 2013-02-23 23:50:46 +01:00
Alessandro Ranellucci
08a72c0824 Use bridge math for the first solid infill layer above sparse infill. #240 2013-02-23 21:39:13 +01:00
Alessandro Ranellucci
5eade0f9e1 Don't validate the number of layers for infill combination, just limit it automatically. #993 2013-02-22 16:24:24 +01:00
Alessandro Ranellucci
91bcfc8a74 Remove $Slic3r::flow and $Slic3r::first_layer_flow 2013-02-22 16:08:11 +01:00
Alessandro Ranellucci
b9c84490b8 Get rid of most calls to $Slic3r::flow 2013-02-19 12:37:26 +01:00
Alessandro Ranellucci
6dc62d3cf2 Disable extra perimeters if fill density is zero as they wouldn't be supported by anything and would just float inside the object. infill_only_where_needed should be the method of choice for hollow objects 2013-02-19 12:37:26 +01:00
Mike Sheldrake
c2f04f2861 avoid overlap of single layer and multilayer fill 
A single-layer rectilinear or honeycomb fill under a low slope
wall/ceiling or extra perimeter will stick out from under the
overhang, because those fills get extended beyond their fill_surface
boundaries to purposely overlap perimeters. This causes interference
with multil-layer fills. This commit clips the single layer fill
boundaries a bit more where they interface with multi-layer fill
boundaries, to avoid overlap.
 2013-02-18 07:26:19 -08:00
Mike Sheldrake
9a86edc70c account for extrusion width when clearing layers for combined infill 
Otherwise you get extraneous fill up against sloped walls in regions
of layers that should not have fill, like in #834.
 2013-02-16 07:53:47 -08:00
Alessandro Ranellucci
c9b506fa02 New simpler and more robust implementation of infill every 'n' layers 2013-02-10 12:40:43 +01:00
Alessandro Ranellucci
cac79c0575 New option to only infill where strictly needed for supporting ceilings 2013-02-09 23:36:32 +01:00