3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Commit Graph

  • 6600478243 Releasing 0.6.0 Alessandro Ranellucci 2012-01-21 19:10:27 +0100
  • debdd164e2 Bugfix: fatal error and warnings removed when cleaning some dirty layers Alessandro Ranellucci 2012-01-21 18:44:24 +0100
  • 00c6287488 Bugfix: fill escapes perimeters. #139 Alessandro Ranellucci 2012-01-21 17:11:14 +0100
  • a4194554c9 Write single wall width (extrusion width) to the G-code file Alessandro Ranellucci 2012-01-21 17:02:55 +0100
  • 331ede52b8 Do all shells for a hole before moving onto the next one. #88 Alessandro Ranellucci 2012-01-21 16:35:33 +0100
  • 63972a3a35 Some more overlap Alessandro Ranellucci 2012-01-21 16:35:23 +0100
  • 7636b67871 Fix comments in Perimeter.pm Alessandro Ranellucci 2012-01-21 12:00:12 +0100
  • f1b1454b36 Loops were not closing well Alessandro Ranellucci 2012-01-21 11:51:31 +0100
  • 0e23f20df1 Poor overlap between perimeters and infill Alessandro Ranellucci 2012-01-21 11:48:03 +0100
  • a0ebee2ca3 Warn if no layers were detected Alessandro Ranellucci 2012-01-21 11:34:03 +0100
  • c5b6787a19 Print the number of bogus holes to debug output Alessandro Ranellucci 2012-01-21 11:24:26 +0100
  • 92cdaf2f2d Retract at end of print Alessandro Ranellucci 2012-01-20 14:48:51 +0100
  • ce4aca0b29 Revoking Artistic License Alessandro Ranellucci 2012-01-18 20:04:18 +0100
  • d1ad02cc71 Removed one more fatal error caused by recent refactoring Alessandro Ranellucci 2012-01-18 19:28:49 +0100
  • bba91fc0a5 Some better debug messages and a note about self-intersecting polygons. #160 Alessandro Ranellucci 2012-01-18 18:59:34 +0100
  • 478775ef1c Add checkbox to GUI to enable G-code comments Alessandro Ranellucci 2012-01-18 10:46:39 +0100
  • f419cf37d1 Use solid print speed for internal solid layers too. #167 Alessandro Ranellucci 2012-01-18 10:07:42 +0100
  • 59cd027a68 Temporarily disable small gap filling as it requires a fix not to slow down everything Alessandro Ranellucci 2012-01-13 18:24:08 +0100
  • 90d10b24a8 Fill gaps using medial axis detection Alessandro Ranellucci 2012-01-12 22:05:35 +0100
  • a3a9cf5749 Yet other things not changed when refactored. #163 Alessandro Ranellucci 2012-01-12 10:48:18 +0100
  • b605381132 Bugfix: more errors in infills after refactoring. #162 Alessandro Ranellucci 2012-01-11 23:19:56 +0100
  • 8735ac3c57 Bridges now have higher priority than other solid surfaces. #140 Alessandro Ranellucci 2012-01-11 23:15:32 +0100
  • 5fefcc0dc4 More fixes after refactoring Alessandro Ranellucci 2012-01-11 23:14:59 +0100
  • 468f09d3c1 Bugfix: small surfaces where still infilled even with fill_density = 0 Alessandro Ranellucci 2012-01-11 22:38:06 +0100
  • ac8a33a40a Merge pull request #143 from triffid/check-bin-dir-for-config Alessandro Ranellucci 2012-01-11 13:17:02 -0800
  • 0184b0f205 Fixed many little things that were not updated along with recent large refactoring. #157 #144 Alessandro Ranellucci 2012-01-11 20:13:26 +0100
  • 7bf354151c also check slic3r bin directory for config Michael Moon 2011-12-31 17:39:28 +1100
  • 8ed91a8ec4 Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes. Alessandro Ranellucci 2011-12-30 19:59:51 +0100
  • 2def6a9787 Bugfix: medial axis code threw fatal errors sometimes Alessandro Ranellucci 2011-12-30 18:58:27 +0100
  • 4b2bd7f779 Bugfix: wrong month number in output Alessandro Ranellucci 2011-12-30 18:57:58 +0100
  • f08ebe97b2 Bugfix: fatal error for some models and thin walls not considered for skirt Alessandro Ranellucci 2011-12-30 18:51:48 +0100
  • 1c7564e4a4 Thin walls. #24 Alessandro Ranellucci 2011-12-30 17:17:37 +0100
  • 62ee79f0c9 Remember last config file path when loaded from CLI too Alessandro Ranellucci 2011-12-26 19:45:01 +0100
  • d6dcb35237 Remember the filename and path of the last config file loaded, to use as default for saving Alessandro Ranellucci 2011-12-26 19:06:57 +0100
  • f9446b9c6e Cleanup the --output-filename-format implementation. #53 #137 Alessandro Ranellucci 2011-12-26 17:20:26 +0100
  • 1071b556cb second draft implementation of output_filename_format Clarence Risher 2011-12-26 04:20:45 -0500
  • 342823fdf3 Bugfix: fatal error in arc detection code. #133 Alessandro Ranellucci 2011-12-25 13:01:48 +0100
  • a86bc260e7 Bugfix: some islands having ho holes and contained in holes themselves were ignored Alessandro Ranellucci 2011-12-24 11:01:28 +0100
  • 47df3f8f2d Releasing 0.5.7 Alessandro Ranellucci 2011-12-22 18:56:11 +0100
  • ab0300bb70 Bugfix for recent solid infill adjustment math, to take float math into account Alessandro Ranellucci 2011-12-22 18:55:18 +0100
  • 75cbe879b7 New "Slice and save as..." command to specify output filename. #53 Alessandro Ranellucci 2011-12-22 17:38:37 +0100
  • b1d6420ff4 Avoid test failures due to floating point values comparison Alessandro Ranellucci 2011-12-22 12:19:24 +0100
  • 1cc28844a5 Merge pull request #131 from sparr/master Alessandro Ranellucci 2011-12-22 03:16:16 -0800
  • a81e8c4afc correct length calculation for clockwise arcs Clarence Risher 2011-12-22 06:09:01 -0500
  • 55045e0437 Limit skirt height to the print height. #128 Alessandro Ranellucci 2011-12-22 11:57:26 +0100
  • 28b851508e Extended arcs unit test to check whether it works with both cw and ccw arcs Alessandro Ranellucci 2011-12-22 11:38:04 +0100
  • 98a8c64ed7 Extended (and fixed) unit testing to track down (and fix) an issue caused by floating point math that reversed some holes into contours when they should actually be ignored Alessandro Ranellucci 2011-12-22 11:24:46 +0100
  • fbea5dae8f Bugfix: consider holes when searching for supporting surfaces Alessandro Ranellucci 2011-12-20 22:37:59 +0100
  • fcb7f63c87 Added --ignore-nonexistent-config to allow integration with Pronterface even if config file doesn't exist Alessandro Ranellucci 2011-12-20 17:44:19 +0100
  • caf41f07dd Output required filament length and volume to command line and to the gcode file itself Alessandro Ranellucci 2011-12-20 15:29:15 +0100
  • 627e1b32e2 Add Slic3r version to gcode comment Alessandro Ranellucci 2011-12-20 14:20:39 +0100
  • 5e850557d4 Added note to self about using the skeletonization algorithm to fill small gaps Alessandro Ranellucci 2011-12-19 13:00:42 +0100
  • e2a5c2119f Bugfix: some holes were skipped Alessandro Ranellucci 2011-12-19 12:09:14 +0100
  • 4af295bce3 Bugfix: very wrong infill for low density regions. #127 Alessandro Ranellucci 2011-12-19 09:55:03 +0100
  • 65a018f156 Move the parsing warning to the end, so that it won't block slicing Alessandro Ranellucci 2011-12-18 13:43:31 +0100
  • f20209ce01 Add spacing between adjacent surfaces to avoid mini blobs Alessandro Ranellucci 2011-12-18 13:38:45 +0100
  • e5619ee543 Bugfix: not all paths were closed correctly due to float rounding Alessandro Ranellucci 2011-12-18 11:53:15 +0100
  • 47bbe18de2 Additional check to return a friendly error when binary STL is not valid Alessandro Ranellucci 2011-12-18 10:50:55 +0100
  • eca6d0b6d0 Adjust flow for solid surfaces when using concentric infill too. #120 Alessandro Ranellucci 2011-12-17 20:29:06 +0100
  • 6a3eeef83b Removed warnings for concentric infill. #121 Alessandro Ranellucci 2011-12-17 19:59:31 +0100
  • f73febff7a Always start concentric infill from the center. #120 Alessandro Ranellucci 2011-12-17 19:56:56 +0100
  • d63eabcfa5 Clip less from loops to avoid gaps Alessandro Ranellucci 2011-12-17 19:54:35 +0100
  • 1e6ecd9eab Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap. Alessandro Ranellucci 2011-12-17 19:52:34 +0100
  • cd0fd80a69 Restore better perimeter/infill overlap for solid surfaces Alessandro Ranellucci 2011-12-16 18:37:43 +0100
  • 8e04d763f4 Don't increase flow for overlapping purposes when bridging Alessandro Ranellucci 2011-12-16 10:53:22 +0100
  • f5eb4f03e1 Skirt can be disabled by either setting skirts to 0 or skirt-height to 0 Alessandro Ranellucci 2011-12-16 09:55:13 +0100
  • 172253cfd7 Always use rectilinear infill for internal-solid surfaces Alessandro Ranellucci 2011-12-15 22:05:15 +0100
  • 8e06a4f6f2 Bugfix: fatal error when using concentric infill Alessandro Ranellucci 2011-12-15 21:46:29 +0100
  • e6bce05d9b Releasing 0.5.6 Alessandro Ranellucci 2011-12-15 20:39:14 +0100
  • b422537cc4 Bugfix: do not die when no layers are detected at all Alessandro Ranellucci 2011-12-15 20:36:46 +0100
  • 18cfc15ead Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm) Alessandro Ranellucci 2011-12-15 20:21:34 +0100
  • 2e013e72e8 Bugfix: models located very far from XYZ origin were incorrectly placed on the print area Alessandro Ranellucci 2011-12-15 19:40:32 +0100
  • 40d06a6e11 Erorr in last commit about automatic extrusion width. #112 Alessandro Ranellucci 2011-12-15 12:50:02 +0100
  • 156a1deb0a Limit automatic extrusion width to be <= 1.2 * nozzle_diameter (Triffid's way). #112 Alessandro Ranellucci 2011-12-15 09:33:42 +0100
  • d346bc02cc Comments are now disabled by default, new --gcode-comments option to enable them Alessandro Ranellucci 2011-12-14 19:49:21 +0100
  • 3d213069a6 Bugfix: 100% overlap between perimeter and infill. #118 Alessandro Ranellucci 2011-12-14 19:40:18 +0100
  • b9d01a32e5 Merge branch 'new-math' Alessandro Ranellucci 2011-12-14 16:12:05 +0100
  • 2475de0554 Fix Pronterface instructions Alessandro Ranellucci 2011-12-14 16:10:36 +0100
  • 048f7ca468 Adjusted flow width for solid infills was ignored Alessandro Ranellucci 2011-12-14 11:35:19 +0100
  • 4bee1a12b8 Take overlap into account for external dimensions Alessandro Ranellucci 2011-12-14 11:21:43 +0100
  • efbcbc5bbf Changed default retraction speed to 30mm/s. #115 Alessandro Ranellucci 2011-12-14 10:33:22 +0100
  • ca5dfc05e7 Accept STL files with spaces at the end of vertex lines. #119 Alessandro Ranellucci 2011-12-14 10:29:08 +0100
  • cf33ec0a5c Notes about integration with Pronterface Alessandro Ranellucci 2011-12-13 21:51:07 +0100
  • 569e737ae1 Only connect infill edges when not doing solid surfaces Alessandro Ranellucci 2011-12-13 17:36:03 +0100
  • 56691c1dea Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112 Alessandro Ranellucci 2011-12-13 17:34:31 +0100
  • 869cb48c1a Merge branch 'master' of github.com:alexrj/Slic3r Alessandro Ranellucci 2011-12-12 17:35:18 +0100
  • 3c2b2cfef2 Bugfix: duplicate options did not work correctly for copies > 2. #113 Alessandro Ranellucci 2011-12-12 17:32:45 +0100
  • 344a038fea Merge pull request #114 from rtgoodwin/add_scale_output Alessandro Ranellucci 2011-12-11 14:22:39 -0800
  • 557afcc4b1 Added scale to settings output Richard Goodwin 2011-12-11 15:32:47 -0600
  • 9a610395ce Move post-processing to utils/ directory Alessandro Ranellucci 2011-12-11 10:20:53 +0100
  • e99de80cd8 Merge pull request #111 from triffid/z-every-line-postprocessing-script Alessandro Ranellucci 2011-12-11 01:20:22 -0800
  • ca25494177 add some comments Michael Moon 2011-12-11 08:27:16 +1100
  • 359d4073df add z-every-line script, first attempt Michael Moon 2011-12-11 08:22:14 +1100
  • 0ebd8eb8a9 Don't die when config has unknown options. #108 Alessandro Ranellucci 2011-12-10 10:39:07 +0100
  • c957c27367 Remember last opened directory. #106 Alessandro Ranellucci 2011-12-09 14:07:50 +0100
  • b92ba67272 Workaround for a WxWidgets bug that clips the overlap_ratio label on Mac Alessandro Ranellucci 2011-12-08 22:06:53 +0100
  • 0a74e068a3 Merge branch 'infill-overlap' Alessandro Ranellucci 2011-12-08 10:53:24 +0100
  • d9a70ea80d Customizable overlap ratio (it defaults to 0.15 now) Alessandro Ranellucci 2011-12-07 19:33:59 +0100
  • 7473d5f140 Set default infill angle to 45°. #103 Alessandro Ranellucci 2011-12-08 10:33:05 +0100
  • d813aea59a Don't slow down retractions on bottom layer. #101 Alessandro Ranellucci 2011-12-08 10:28:23 +0100