package Slic3r::GUI::SkeinPanel;
use strict;
use warnings;
use utf8;

use File::Basename qw(basename dirname);
use List::Util qw(min);
use Slic3r::Geometry qw(X Y);
use Wx qw(:dialog :filedialog :font :icon :id :misc :notebook :panel :sizer);
use Wx::Event qw(EVT_BUTTON);
use base 'Wx::Panel';

our $last_input_file;
our $last_output_file;
our $last_config;

use constant FILE_WILDCARDS => {
    known   => 'Known files (*.stl, *.obj, *.amf, *.xml)|*.stl;*.STL;*.obj;*.OBJ;*.amf;*.AMF;*.xml;*.XML',
    stl     => 'STL files (*.stl)|*.stl;*.STL',
    obj     => 'OBJ files (*.obj)|*.obj;*.OBJ',
    amf     => 'AMF files (*.amf)|*.amf;*.AMF;*.xml;*.XML',
    ini     => 'INI files *.ini|*.ini;*.INI',
    gcode   => 'G-code files (*.gcode, *.gco, *.g, *.ngc)|*.gcode;*.GCODE;*.gco;*.GCO;*.g;*.G;*.ngc;*.NGC',
    svg     => 'SVG files *.svg|*.svg;*.SVG',
};
use constant MODEL_WILDCARD => join '|', @{&FILE_WILDCARDS}{qw(known stl obj amf)};

sub new {
    my $class = shift;
    my ($parent, %params) = @_;
    my $self = $class->SUPER::new($parent, -1, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
    $self->{mode} = $params{mode};
    $self->{mode} = 'expert' if $self->{mode} !~ /^(?:simple|expert)$/;
    
    $self->{tabpanel} = Wx::Notebook->new($self, -1, wxDefaultPosition, wxDefaultSize, wxNB_TOP | wxTAB_TRAVERSAL);
    $self->{tabpanel}->AddPage($self->{plater} = Slic3r::GUI::Plater->new($self->{tabpanel}), "Plater")
        unless $params{no_plater};
    $self->{options_tabs} = {};
    
    my $simple_config;
    if ($self->{mode} eq 'simple') {
        $simple_config = Slic3r::Config->load("$Slic3r::GUI::datadir/simple.ini")
            if -e "$Slic3r::GUI::datadir/simple.ini";
    }
    
    my $class_prefix = $self->{mode} eq 'simple' ? "Slic3r::GUI::SimpleTab::" : "Slic3r::GUI::Tab::";
    my $init = 0;
    for my $tab_name (qw(print filament printer)) {
        my $tab;
        $tab = $self->{options_tabs}{$tab_name} = ($class_prefix . ucfirst $tab_name)->new(
            $self->{tabpanel},
            on_value_change     => sub {
                $self->{plater}->on_config_change(@_) if $self->{plater}; # propagate config change events to the plater
                if ($init) {  # don't save while loading for the first time
                    if ($self->{mode} eq 'simple') {
                        # save config
                        $self->config->save("$Slic3r::GUI::datadir/simple.ini");
                        
                        # save a copy into each preset section
                        # so that user gets the config when switching to expert mode
                        $tab->config->save(sprintf "$Slic3r::GUI::datadir/%s/%s.ini", $tab->name, 'Simple Mode');
                        $Slic3r::GUI::Settings->{presets}{$tab->name} = 'Simple Mode.ini';
                        Slic3r::GUI->save_settings;
                    }
                    $self->config->save($Slic3r::GUI::autosave) if $Slic3r::GUI::autosave;
                }
            },
            on_presets_changed  => sub {
                $self->{plater}->update_presets($tab_name, @_) if $self->{plater};
            },
        );
        $self->{tabpanel}->AddPage($tab, $tab->title);
        $tab->load_config($simple_config) if $simple_config;
    }
    $init = 1;
    
    my $sizer = Wx::BoxSizer->new(wxVERTICAL);
    $sizer->Add($self->{tabpanel}, 1, wxEXPAND);
    
    $sizer->SetSizeHints($self);
    $self->SetSizer($sizer);
    $self->Layout;
    
    return $self;
}

sub quick_slice {
    my $self = shift;
    my %params = @_;
    
    my $process_dialog;
    eval {
        # validate configuration
        my $config = $self->config;
        $config->validate;

        # confirm slicing of more than one copies
        my $copies = $config->duplicate_grid->[X] * $config->duplicate_grid->[Y];
        $copies = $config->duplicate if $config->duplicate > 1;
        if ($copies > 1) {
            my $confirmation = Wx::MessageDialog->new($self, "Are you sure you want to slice $copies copies?",
                                                      'Multiple Copies', wxICON_QUESTION | wxOK | wxCANCEL);
            return unless $confirmation->ShowModal == wxID_OK;
        }
        
        # select input file
        my $dir = $Slic3r::GUI::Settings->{recent}{skein_directory} || $Slic3r::GUI::Settings->{recent}{config_directory} || '';

        my $input_file;
        if (!$params{reslice}) {
            my $dialog = Wx::FileDialog->new($self, 'Choose a file to slice (STL/OBJ/AMF):', $dir, "", MODEL_WILDCARD, wxFD_OPEN | wxFD_FILE_MUST_EXIST);
            if ($dialog->ShowModal != wxID_OK) {
                $dialog->Destroy;
                return;
            }
            $input_file = $dialog->GetPaths;
            $dialog->Destroy;
            $last_input_file = $input_file unless $params{export_svg};
        } else {
            if (!defined $last_input_file) {
                Wx::MessageDialog->new($self, "No previously sliced file.",
                                       'Error', wxICON_ERROR | wxOK)->ShowModal();
                return;
            }
            if (! -e $last_input_file) {
                Wx::MessageDialog->new($self, "Previously sliced file ($last_input_file) not found.",
                                       'File Not Found', wxICON_ERROR | wxOK)->ShowModal();
                return;
            }
            $input_file = $last_input_file;
        }
        my $input_file_basename = basename($input_file);
        $Slic3r::GUI::Settings->{recent}{skein_directory} = dirname($input_file);
        Slic3r::GUI->save_settings;
        
        my $print = $self->init_print;
        $print->add_model(Slic3r::Model->read_from_file($input_file));
        $print->validate;

        # select output file
        my $output_file = $main::opt{output};
        if ($params{reslice}) {
            $output_file = $last_output_file if defined $last_output_file;
        } elsif ($params{save_as}) {
            $output_file = $print->expanded_output_filepath($output_file);
            $output_file =~ s/\.gcode$/.svg/i if $params{export_svg};
            my $dlg = Wx::FileDialog->new($self, 'Save ' . ($params{export_svg} ? 'SVG' : 'G-code') . ' file as:',
                Slic3r::GUI->output_path(dirname($output_file)),
                basename($output_file), $params{export_svg} ? FILE_WILDCARDS->{svg} : FILE_WILDCARDS->{gcode}, wxFD_SAVE);
            if ($dlg->ShowModal != wxID_OK) {
                $dlg->Destroy;
                return;
            }
            $output_file = $dlg->GetPath;
            $last_output_file = $output_file unless $params{export_svg};
            $Slic3r::GUI::Settings->{_}{last_output_path} = dirname($output_file);
            Slic3r::GUI->save_settings;
            $dlg->Destroy;
        }
        
        # show processbar dialog
        $process_dialog = Wx::ProgressDialog->new('Slicing…', "Processing $input_file_basename…", 
            100, $self, 0);
        $process_dialog->Pulse;
        
        {
            my @warnings = ();
            local $SIG{__WARN__} = sub { push @warnings, $_[0] };
            my %export_params = (
                output_file => $output_file,
                status_cb   => sub {
                    my ($percent, $message) = @_;
                    if (&Wx::wxVERSION_STRING =~ / 2\.(8\.|9\.[2-9])/) {
                        $process_dialog->Update($percent, "$message…");
                    }
                },
            );
            if ($params{export_svg}) {
                $print->export_svg(%export_params);
            } else {
                $print->export_gcode(%export_params);
            }
            Slic3r::GUI::warning_catcher($self)->($_) for @warnings;
        }
        $process_dialog->Destroy;
        undef $process_dialog;
        
        my $message = "$input_file_basename was successfully sliced";
        if ($print->processing_time) {
            $message .= ' in';
            my $minutes = int($print->processing_time/60);
            $message .= sprintf " %d minutes and", $minutes if $minutes;
            $message .= sprintf " %.1f seconds", $print->processing_time - $minutes*60;
        }
        $message .= ".";
        &Wx::wxTheApp->notify($message);
        Wx::MessageDialog->new($self, $message, 'Slicing Done!', 
            wxOK | wxICON_INFORMATION)->ShowModal;
    };
    Slic3r::GUI::catch_error($self, sub { $process_dialog->Destroy if $process_dialog });
}

sub repair_stl {
    my $self = shift;
    
    my $input_file;
    {
        my $dir = $Slic3r::GUI::Settings->{recent}{skein_directory} || $Slic3r::GUI::Settings->{recent}{config_directory} || '';
        my $dialog = Wx::FileDialog->new($self, 'Select the STL file to repair:', $dir, "", FILE_WILDCARDS->{stl}, wxFD_OPEN | wxFD_FILE_MUST_EXIST);
        if ($dialog->ShowModal != wxID_OK) {
            $dialog->Destroy;
            return;
        }
        $input_file = $dialog->GetPaths;
        $dialog->Destroy;
    }
    
    my $output_file = $input_file;
    {
        $output_file =~ s/\.stl$/_fixed.obj/i;
        my $dlg = Wx::FileDialog->new($self, "Save OBJ file (less prone to coordinate errors than STL) as:", dirname($output_file),
            basename($output_file), &Slic3r::GUI::SkeinPanel::FILE_WILDCARDS->{obj}, wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
        if ($dlg->ShowModal != wxID_OK) {
            $dlg->Destroy;
            return undef;
        }
        $output_file = $dlg->GetPath;
        $dlg->Destroy;
    }
    
    my $tmesh = Slic3r::TriangleMesh->new;
    $tmesh->ReadSTLFile($input_file);
    $tmesh->repair;
    $tmesh->WriteOBJFile($output_file);
    Slic3r::GUI::show_info($self, "Your file was repaired.", "Repair");
}

sub extra_variables {
    my $self = shift;
    
    my %extra_variables = ();
    if ($self->{mode} eq 'expert') {
        $extra_variables{"${_}_preset"} = $self->{options_tabs}{$_}->current_preset->{name}
            for qw(print filament printer);
    }
    return { %extra_variables };
}

sub init_print {
    my $self = shift;
    
    return Slic3r::Print->new(
        config          => $self->config,
        extra_variables => $self->extra_variables,
    );
}

sub export_config {
    my $self = shift;
    
    my $config = $self->config;
    eval {
        # validate configuration
        $config->validate;
    };
    Slic3r::GUI::catch_error($self) and return;
    
    my $dir = $last_config ? dirname($last_config) : $Slic3r::GUI::Settings->{recent}{config_directory} || $Slic3r::GUI::Settings->{recent}{skein_directory} || '';
    my $filename = $last_config ? basename($last_config) : "config.ini";
    my $dlg = Wx::FileDialog->new($self, 'Save configuration as:', $dir, $filename, 
        FILE_WILDCARDS->{ini}, wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
    if ($dlg->ShowModal == wxID_OK) {
        my $file = $dlg->GetPath;
        $Slic3r::GUI::Settings->{recent}{config_directory} = dirname($file);
        Slic3r::GUI->save_settings;
        $last_config = $file;
        $config->save($file);
    }
    $dlg->Destroy;
}

sub load_config_file {
    my $self = shift;
    my ($file) = @_;
    
    if (!$file) {
        return unless $self->check_unsaved_changes;
        my $dir = $last_config ? dirname($last_config) : $Slic3r::GUI::Settings->{recent}{config_directory} || $Slic3r::GUI::Settings->{recent}{skein_directory} || '';
        my $dlg = Wx::FileDialog->new($self, 'Select configuration to load:', $dir, "config.ini", 
                FILE_WILDCARDS->{ini}, wxFD_OPEN | wxFD_FILE_MUST_EXIST);
        return unless $dlg->ShowModal == wxID_OK;
        ($file) = $dlg->GetPaths;
        $dlg->Destroy;
    }
    $Slic3r::GUI::Settings->{recent}{config_directory} = dirname($file);
    Slic3r::GUI->save_settings;
    $last_config = $file;
    for my $tab (values %{$self->{options_tabs}}) {
        $tab->load_config_file($file);
    }
}

sub load_config {
    my $self = shift;
    my ($config) = @_;
    
    foreach my $tab (values %{$self->{options_tabs}}) {
        $tab->set_value($_, $config->$_) for keys %$config;
    }
}

sub config_wizard {
    my $self = shift;

    return unless $self->check_unsaved_changes;
    if (my $config = Slic3r::GUI::ConfigWizard->new($self)->run) {
        if ($self->{mode} eq 'expert') {
            for my $tab (values %{$self->{options_tabs}}) {
                $tab->select_default_preset;
            }
        }
        $self->load_config($config);
        if ($self->{mode} eq 'expert') {
            for my $tab (values %{$self->{options_tabs}}) {
                $tab->save_preset('My Settings');
            }
        }
    }
}

sub combine_stls {
    my $self = shift;
    
    # get input files
    my @input_files = ();
    my $dir = $Slic3r::GUI::Settings->{recent}{skein_directory} || '';
    {
        my $dlg_message = 'Choose one or more files to combine (STL/OBJ)';
        while (1) {
            my $dialog = Wx::FileDialog->new($self, "$dlg_message:", $dir, "", MODEL_WILDCARD, 
                wxFD_OPEN | wxFD_MULTIPLE | wxFD_FILE_MUST_EXIST);
            if ($dialog->ShowModal != wxID_OK) {
                $dialog->Destroy;
                last;
            }
            push @input_files, $dialog->GetPaths;
            $dialog->Destroy;
            $dlg_message .= " or hit Cancel if you have finished";
            $dir = dirname($input_files[0]);
        }
        return if !@input_files;
    }
    
    # get output file
    my $output_file = $input_files[0];
    {
        $output_file =~ s/\.(?:stl|obj)$/.amf.xml/i;
        my $dlg = Wx::FileDialog->new($self, 'Save multi-material AMF file as:', dirname($output_file),
            basename($output_file), FILE_WILDCARDS->{amf}, wxFD_SAVE);
        if ($dlg->ShowModal != wxID_OK) {
            $dlg->Destroy;
            return;
        }
        $output_file = $dlg->GetPath;
    }
    
    my @models = map Slic3r::Model->read_from_file($_), @input_files;
    my $new_model = Slic3r::Model->new;
    my $new_object = $new_model->add_object;
    for my $m (0 .. $#models) {
        my $model = $models[$m];
        $new_model->set_material($m, { Name => basename($input_files[$m]) });
        $new_object->add_volume(
            material_id => $m,
            mesh        => $model->objects->[0]->volumes->[0]->mesh,
        );
    }
    
    Slic3r::Format::AMF->write_file($output_file, $new_model);
}

=head2 config

This method collects all config values from the tabs and merges them into a single config object.

=cut

sub config {
    my $self = shift;
    
    # retrieve filament presets and build a single config object for them
    my $filament_config;
    if (!$self->{plater} || $self->{plater}->filament_presets == 1 || $self->{mode} eq 'simple') {
        $filament_config = $self->{options_tabs}{filament}->config;
    } else {
        # TODO: handle dirty presets.
        # perhaps plater shouldn't expose dirty presets at all in multi-extruder environments.
        foreach my $preset_idx ($self->{plater}->filament_presets) {
            my $preset = $self->{options_tabs}{filament}->get_preset($preset_idx);
            my $config = $self->{options_tabs}{filament}->get_preset_config($preset);
            if (!$filament_config) {
                $filament_config = $config;
                next;
            }
            foreach my $opt_key (keys %$config) {
                next unless ref $filament_config->get($opt_key) eq 'ARRAY';
                push @{ $filament_config->get($opt_key) }, $config->get($opt_key)->[0];
            }
        }
    }
    
    my $config = Slic3r::Config->merge(
        Slic3r::Config->new_from_defaults,
        $self->{options_tabs}{print}->config,
        $self->{options_tabs}{printer}->config,
        $filament_config,
    );
    
    if ($self->{mode} eq 'simple') {
        # set some sensible defaults
        $config->set('first_layer_height', $config->nozzle_diameter->[0]);
        $config->set('avoid_crossing_perimeters', 1);
        $config->set('infill_every_layers', 10);
    } else {
        my $extruders_count = $self->{options_tabs}{printer}{extruders_count};
        $config->set("${_}_extruder", min($config->get("${_}_extruder"), $extruders_count))
            for qw(perimeter infill support_material support_material_interface);
    }
    
    return $config;
}

sub set_value {
    my $self = shift;
    my ($opt_key, $value) = @_;
    
    my $changed = 0;
    foreach my $tab (values %{$self->{options_tabs}}) {
        $changed = 1 if $tab->set_value($opt_key, $value);
    }
    return $changed;
}

sub check_unsaved_changes {
    my $self = shift;
    
    my @dirty = map $_->title, grep $_->is_dirty, values %{$self->{options_tabs}};
    if (@dirty) {
        my $titles = join ', ', @dirty;
        my $confirm = Wx::MessageDialog->new($self, "You have unsaved changes ($titles). Discard changes and continue anyway?",
                                             'Unsaved Presets', wxICON_QUESTION | wxYES_NO | wxNO_DEFAULT);
        return ($confirm->ShowModal == wxID_YES);
    }
    
    return 1;
}

sub select_tab {
    my ($self, $tab) = @_;
    $self->{tabpanel}->ChangeSelection($tab);
}

1;