# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-04-16 11:29+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:42 src/slic3r/GUI/AboutDialog.cpp:295 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:130 src/slic3r/GUI/AboutDialog.cpp:259 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:132 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:202 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:234 src/slic3r/GUI/MainFrame.cpp:70 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:261 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:262 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:263 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:264 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/AppConfig.cpp:110 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:101 msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:104 msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:107 msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:110 msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:113 msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:120 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:468 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:122 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:126 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:168 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:210 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:470 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:493 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:66 src/slic3r/GUI/GUI_ObjectList.cpp:2073 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:73 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:79 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:162 #: src/slic3r/GUI/Tab.cpp:2319 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:80 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:88 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:89 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:93 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:96 src/slic3r/GUI/ConfigWizard.cpp:233 #: src/slic3r/GUI/ConfigWizard.cpp:985 src/slic3r/GUI/ConfigWizard.cpp:999 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:142 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:333 #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 #: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75 #: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:91 #: src/libslic3r/PrintConfig.cpp:122 src/libslic3r/PrintConfig.cpp:188 #: src/libslic3r/PrintConfig.cpp:246 src/libslic3r/PrintConfig.cpp:321 #: src/libslic3r/PrintConfig.cpp:329 src/libslic3r/PrintConfig.cpp:379 #: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:516 #: src/libslic3r/PrintConfig.cpp:534 src/libslic3r/PrintConfig.cpp:712 #: src/libslic3r/PrintConfig.cpp:1231 src/libslic3r/PrintConfig.cpp:1292 #: src/libslic3r/PrintConfig.cpp:1310 src/libslic3r/PrintConfig.cpp:1328 #: src/libslic3r/PrintConfig.cpp:1384 src/libslic3r/PrintConfig.cpp:1394 #: src/libslic3r/PrintConfig.cpp:1516 src/libslic3r/PrintConfig.cpp:1524 #: src/libslic3r/PrintConfig.cpp:1565 src/libslic3r/PrintConfig.cpp:1573 #: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1591 #: src/libslic3r/PrintConfig.cpp:1599 src/libslic3r/PrintConfig.cpp:1682 #: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1992 #: src/libslic3r/PrintConfig.cpp:2026 src/libslic3r/PrintConfig.cpp:2154 #: src/libslic3r/PrintConfig.cpp:2233 src/libslic3r/PrintConfig.cpp:2240 #: src/libslic3r/PrintConfig.cpp:2247 src/libslic3r/PrintConfig.cpp:2277 #: src/libslic3r/PrintConfig.cpp:2287 src/libslic3r/PrintConfig.cpp:2297 #: src/libslic3r/PrintConfig.cpp:2457 src/libslic3r/PrintConfig.cpp:2491 #: src/libslic3r/PrintConfig.cpp:2630 src/libslic3r/PrintConfig.cpp:2639 #: src/libslic3r/PrintConfig.cpp:2648 src/libslic3r/PrintConfig.cpp:2658 #: src/libslic3r/PrintConfig.cpp:2712 src/libslic3r/PrintConfig.cpp:2722 #: src/libslic3r/PrintConfig.cpp:2734 src/libslic3r/PrintConfig.cpp:2754 #: src/libslic3r/PrintConfig.cpp:2764 src/libslic3r/PrintConfig.cpp:2774 #: src/libslic3r/PrintConfig.cpp:2792 src/libslic3r/PrintConfig.cpp:2807 #: src/libslic3r/PrintConfig.cpp:2821 src/libslic3r/PrintConfig.cpp:2832 #: src/libslic3r/PrintConfig.cpp:2845 src/libslic3r/PrintConfig.cpp:2890 #: src/libslic3r/PrintConfig.cpp:2900 src/libslic3r/PrintConfig.cpp:2909 #: src/libslic3r/PrintConfig.cpp:2919 src/libslic3r/PrintConfig.cpp:2935 #: src/libslic3r/PrintConfig.cpp:2959 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:97 src/libslic3r/PrintConfig.cpp:709 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:98 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:102 src/slic3r/GUI/GUI_Preview.cpp:308 #: src/libslic3r/ExtrusionEntity.cpp:322 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:106 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:159 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:176 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:186 src/slic3r/GUI/BedShapeDialog.cpp:265 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:194 src/slic3r/GUI/BedShapeDialog.cpp:273 #: src/slic3r/GUI/Tab.cpp:3155 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:227 src/slic3r/GUI/BedShapeDialog.cpp:306 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:255 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:491 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:498 src/slic3r/GUI/BedShapeDialog.cpp:547 #: src/slic3r/GUI/BedShapeDialog.cpp:570 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:509 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:517 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:521 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:536 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:559 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:59 src/slic3r/GUI/ConfigWizard.cpp:944 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:218 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:225 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:16 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:53 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:48 msgid "" "Zero layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:49 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 src/slic3r/GUI/Tab.cpp:1116 #: src/libslic3r/PrintConfig.cpp:71 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:60 msgid "" "Zero first layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:889 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:81 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:89 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:90 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:115 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:119 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:120 #: src/slic3r/GUI/ConfigManipulation.cpp:140 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:136 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:139 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:159 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:162 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:163 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:208 msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:210 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:211 #: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:96 #: src/slic3r/GUI/GUI_ObjectList.cpp:618 src/slic3r/GUI/Plater.cpp:534 #: src/slic3r/GUI/Tab.cpp:1158 src/slic3r/GUI/Tab.cpp:1159 #: src/libslic3r/PrintConfig.cpp:203 src/libslic3r/PrintConfig.cpp:416 #: src/libslic3r/PrintConfig.cpp:436 src/libslic3r/PrintConfig.cpp:776 #: src/libslic3r/PrintConfig.cpp:790 src/libslic3r/PrintConfig.cpp:827 #: src/libslic3r/PrintConfig.cpp:981 src/libslic3r/PrintConfig.cpp:991 #: src/libslic3r/PrintConfig.cpp:1009 src/libslic3r/PrintConfig.cpp:1028 #: src/libslic3r/PrintConfig.cpp:1047 src/libslic3r/PrintConfig.cpp:1735 #: src/libslic3r/PrintConfig.cpp:1752 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:318 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:320 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:331 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:333 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Preset.cpp:1563 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 src/slic3r/GUI/Preset.cpp:1567 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 src/slic3r/GUI/Tab.cpp:1034 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:104 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:233 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:237 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:304 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:304 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:305 src/slic3r/GUI/ConfigWizard.cpp:588 #: src/slic3r/GUI/Tab.cpp:3214 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:306 src/slic3r/GUI/ConfigWizard.cpp:589 #: src/slic3r/GUI/Plater.cpp:506 src/slic3r/GUI/Plater.cpp:646 #: src/libslic3r/ExtrusionEntity.cpp:309 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:442 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:444 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:446 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:448 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:453 msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:496 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:580 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:581 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:618 src/slic3r/GUI/ConfigWizard.cpp:646 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:747 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:747 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:749 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:751 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:776 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:776 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:784 src/slic3r/GUI/Preferences.cpp:64 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:788 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:794 src/slic3r/GUI/Preferences.cpp:80 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:798 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:801 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:806 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:813 src/slic3r/GUI/GUI_ObjectList.cpp:1678 #: src/slic3r/GUI/GUI_ObjectList.cpp:4040 src/slic3r/GUI/Plater.cpp:3225 #: src/slic3r/GUI/Plater.cpp:3938 src/slic3r/GUI/Plater.cpp:3967 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:816 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:820 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:828 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:830 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:835 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:836 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:837 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:871 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:875 #, possible-c-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:906 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:906 src/slic3r/GUI/Tab.cpp:1980 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:910 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:944 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:947 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:967 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:967 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:981 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:984 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:994 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:995 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:998 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1032 msgid "Extruder and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1032 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1048 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1049 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1052 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1053 src/slic3r/GUI/ConfigWizard.cpp:1067 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1062 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1063 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1066 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1515 src/slic3r/GUI/ConfigWizard.cpp:2097 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1515 src/slic3r/GUI/ConfigWizard.cpp:2099 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1569 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1574 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1810 src/slic3r/GUI/DoubleSlider.cpp:1907 #: src/slic3r/GUI/DoubleSlider.cpp:1928 src/slic3r/GUI/GUI.cpp:246 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1830 msgid "The following FFF printer models have no filament selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1834 msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1848 msgid "The following SLA printer models have no materials selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1852 msgid "Do you want to select default SLA materials for these printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2060 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2063 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2064 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2065 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2066 src/slic3r/GUI/FirmwareDialog.cpp:151 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2079 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2082 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2097 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2097 src/slic3r/GUI/GUI_ObjectList.cpp:3637 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2099 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2099 msgid "Layer height:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2196 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2197 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2199 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2200 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:81 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:952 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:954 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:957 #, possible-c-format msgid "Jump to height %s or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:959 src/slic3r/GUI/DoubleSlider.cpp:1531 #: src/slic3r/GUI/DoubleSlider.cpp:1653 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:962 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:972 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:986 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:988 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:990 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:991 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:993 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:994 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1000 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1009 msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1010 msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1012 msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1014 msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1021 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1023 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1026 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1029 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1032 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1037 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1039 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1040 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1136 src/slic3r/GUI/DoubleSlider.cpp:1172 #: src/slic3r/GUI/GLCanvas3D.cpp:996 src/slic3r/GUI/GUI_ObjectList.cpp:1718 #: src/slic3r/GUI/Tab.cpp:2315 src/libslic3r/GCode/PreviewData.cpp:446 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1137 src/slic3r/GUI/GUI_ObjectList.cpp:1719 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1146 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1146 src/slic3r/GUI/GUI_ObjectList.cpp:1685 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1147 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1149 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1173 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1181 msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1182 msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1479 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1489 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1492 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1510 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1511 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1512 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1518 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1519 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1520 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1521 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1534 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1620 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1621 msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1636 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1637 msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1652 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1901 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1902 src/slic3r/GUI/DoubleSlider.cpp:1918 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1904 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1905 src/slic3r/GUI/DoubleSlider.cpp:1926 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1919 msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" "or CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1922 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1924 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1925 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52 #: src/libslic3r/PrintConfig.cpp:362 src/libslic3r/PrintConfig.cpp:994 #: src/libslic3r/PrintConfig.cpp:1505 src/libslic3r/PrintConfig.cpp:1690 #: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1937 #: src/libslic3r/PrintConfig.cpp:1983 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:136 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:139 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:150 src/slic3r/GUI/OptionsGroup.cpp:598 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:175 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:195 src/slic3r/GUI/Field.cpp:226 #: src/slic3r/GUI/Field.cpp:1298 src/slic3r/GUI/GUI_ObjectLayers.cpp:383 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/Field.cpp:1310 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:240 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:243 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:150 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:199 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:282 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:332 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:436 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:548 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:645 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:647 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:777 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:802 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:805 src/slic3r/GUI/Tab.cpp:1716 #: src/slic3r/GUI/Tab.cpp:1778 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:807 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:809 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:810 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:841 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:852 #: src/slic3r/GUI/Mouse3DController.cpp:371 #: src/slic3r/GUI/PrintHostDialogs.cpp:161 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:902 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:903 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:906 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:238 src/slic3r/GUI/GLCanvas3D.cpp:4962 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:241 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:244 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:247 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:250 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:253 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:256 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:259 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:262 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:265 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:268 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:271 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:277 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:281 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:292 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:298 src/libslic3r/PrintConfig.cpp:511 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:308 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:317 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:607 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:693 msgid "An object outside the print area was detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:694 msgid "A toolpath outside the print area was detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:695 msgid "SLA supports outside the print area were detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:696 msgid "Some objects are not visible" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:698 msgid "" "An object outside the print area was detected\n" "Resolve the current problem to continue slicing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:923 src/slic3r/GUI/GLCanvas3D.cpp:952 msgid "Default print color" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:953 src/slic3r/GUI/GLCanvas3D.cpp:962 #: src/slic3r/GUI/GLCanvas3D.cpp:1001 msgid "Pause print or custom G-code" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:974 #, possible-c-format msgid "up to %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:978 #, possible-c-format msgid "above %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:982 #, possible-c-format msgid "%.2f - %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1014 #, possible-c-format msgid "Color change for Extruder %d at %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1332 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1439 msgid "canvas_tooltip" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1466 msgid "Slope visualization" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1468 msgid "Facets' normal angle range (degrees)" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1495 src/slic3r/GUI/GUI_ObjectList.cpp:1718 #: src/libslic3r/PrintConfig.cpp:335 msgid "Default" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1880 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1888 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1896 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2332 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3224 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:519 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:746 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3308 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:748 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3880 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4425 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4425 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4446 #, possible-c-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4446 #, possible-c-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4856 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4864 src/slic3r/GUI/GUI_ObjectList.cpp:1732 #: src/slic3r/GUI/Plater.cpp:3935 src/slic3r/GUI/Plater.cpp:3957 #: src/slic3r/GUI/Tab.cpp:3155 msgid "Delete" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4873 src/slic3r/GUI/KBShortcutsDialog.cpp:131 #: src/slic3r/GUI/Plater.cpp:4705 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4882 src/slic3r/GUI/KBShortcutsDialog.cpp:160 #: src/slic3r/GUI/Plater.cpp:2815 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4882 src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4894 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4903 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4915 src/slic3r/GUI/Plater.cpp:3794 #: src/slic3r/GUI/Plater.cpp:3806 src/slic3r/GUI/Plater.cpp:3944 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4926 src/slic3r/GUI/Plater.cpp:3946 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4939 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4949 src/slic3r/GUI/GUI_ObjectList.cpp:1501 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5013 src/slic3r/GUI/KBShortcutsDialog.cpp:132 #: src/slic3r/GUI/MainFrame.cpp:717 msgid "Undo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5013 src/slic3r/GUI/GLCanvas3D.cpp:5052 msgid "Click right mouse button to open/close History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5036 msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5052 src/slic3r/GUI/KBShortcutsDialog.cpp:133 #: src/slic3r/GUI/MainFrame.cpp:720 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5074 msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:7064 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:7083 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3DManager.cpp:365 #, possible-c-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3DManager.cpp:368 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/GLCanvas3DManager.cpp:371 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw_renderer parameter." msgstr "" #: src/slic3r/GUI/GLCanvas3DManager.cpp:373 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:47 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:145 src/libslic3r/PrintConfig.cpp:3424 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:169 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:176 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:41 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42 #: src/libslic3r/PrintConfig.cpp:2951 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:307 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:428 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:628 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:699 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:791 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:846 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:449 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:480 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:499 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:517 #: src/libslic3r/PrintConfig.cpp:3473 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:79 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:500 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:518 #: src/libslic3r/PrintConfig.cpp:3488 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53 #: src/libslic3r/PrintConfig.cpp:2781 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:373 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:513 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:693 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:761 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:868 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:893 msgid "SLA gizmo turned on" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:909 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:910 msgid "Save changes?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:922 msgid "SLA gizmo turned off" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:953 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1046 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1125 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1126 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127 src/slic3r/GUI/GUI.cpp:258 #: src/slic3r/GUI/Tab.cpp:3085 src/slic3r/GUI/WipeTowerDialog.cpp:45 #: src/slic3r/GUI/WipeTowerDialog.cpp:366 msgid "Warning" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1132 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1179 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1190 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1208 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1208 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1209 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1209 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:747 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:662 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:234 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:237 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:554 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:557 src/slic3r/GUI/GUI_App.cpp:565 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:570 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:575 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:654 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:672 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:733 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:733 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:911 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:914 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:914 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:915 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:915 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:916 msgid "Check for updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:916 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:918 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:924 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:927 src/slic3r/GUI/wxExtensions.cpp:756 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:927 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:929 src/slic3r/GUI/wxExtensions.cpp:758 msgctxt "Mode" msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:929 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:930 src/slic3r/GUI/wxExtensions.cpp:759 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:930 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:935 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:935 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:937 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:939 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:939 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:954 msgid "Taking configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:954 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1001 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1003 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1004 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1028 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1052 msgid "The presets on the following tabs were modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1052 src/slic3r/GUI/Tab.cpp:2945 msgid "Discard changes and continue anyway?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1055 msgid "Unsaved Presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1204 src/slic3r/GUI/Tab.cpp:2957 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1205 msgid "Please check and fix your object list." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1206 src/slic3r/GUI/Plater.cpp:2377 #: src/slic3r/GUI/Tab.cpp:2959 msgid "Attention!" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1223 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:158 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:162 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:95 #: src/slic3r/GUI/GUI_ObjectList.cpp:617 src/libslic3r/PrintConfig.cpp:72 #: src/libslic3r/PrintConfig.cpp:175 src/libslic3r/PrintConfig.cpp:184 #: src/libslic3r/PrintConfig.cpp:408 src/libslic3r/PrintConfig.cpp:470 #: src/libslic3r/PrintConfig.cpp:478 src/libslic3r/PrintConfig.cpp:890 #: src/libslic3r/PrintConfig.cpp:1075 src/libslic3r/PrintConfig.cpp:1374 #: src/libslic3r/PrintConfig.cpp:1441 src/libslic3r/PrintConfig.cpp:1622 #: src/libslic3r/PrintConfig.cpp:2081 src/libslic3r/PrintConfig.cpp:2140 #: src/libslic3r/PrintConfig.cpp:2149 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:97 #: src/slic3r/GUI/GUI_ObjectList.cpp:619 src/slic3r/GUI/GUI_Preview.cpp:305 #: src/slic3r/GUI/Tab.cpp:1188 src/slic3r/GUI/Tab.cpp:1189 #: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/PrintConfig.cpp:370 #: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1873 #: src/libslic3r/PrintConfig.cpp:1879 src/libslic3r/PrintConfig.cpp:1887 #: src/libslic3r/PrintConfig.cpp:1899 src/libslic3r/PrintConfig.cpp:1909 #: src/libslic3r/PrintConfig.cpp:1917 src/libslic3r/PrintConfig.cpp:1932 #: src/libslic3r/PrintConfig.cpp:1953 src/libslic3r/PrintConfig.cpp:1965 #: src/libslic3r/PrintConfig.cpp:1981 src/libslic3r/PrintConfig.cpp:1990 #: src/libslic3r/PrintConfig.cpp:1999 src/libslic3r/PrintConfig.cpp:2010 #: src/libslic3r/PrintConfig.cpp:2024 src/libslic3r/PrintConfig.cpp:2032 #: src/libslic3r/PrintConfig.cpp:2033 src/libslic3r/PrintConfig.cpp:2042 #: src/libslic3r/PrintConfig.cpp:2050 src/libslic3r/PrintConfig.cpp:2064 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:101 #: src/slic3r/GUI/GUI_ObjectList.cpp:623 src/libslic3r/PrintConfig.cpp:2259 #: src/libslic3r/PrintConfig.cpp:2267 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:45 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:51 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:52 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:53 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:54 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:620 #: src/slic3r/GUI/GUI_Preview.cpp:283 src/slic3r/GUI/Tab.cpp:1213 #: src/libslic3r/PrintConfig.cpp:235 src/libslic3r/PrintConfig.cpp:458 #: src/libslic3r/PrintConfig.cpp:919 src/libslic3r/PrintConfig.cpp:1048 #: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1668 #: src/libslic3r/PrintConfig.cpp:1723 src/libslic3r/PrintConfig.cpp:1775 #: src/libslic3r/PrintConfig.cpp:2125 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:99 src/slic3r/GUI/GUI_ObjectList.cpp:621 #: src/slic3r/GUI/Tab.cpp:1248 src/slic3r/GUI/Tab.cpp:1871 #: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:1002 #: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1744 #: src/libslic3r/PrintConfig.cpp:1945 src/libslic3r/PrintConfig.cpp:1972 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:100 src/slic3r/GUI/GUI_ObjectList.cpp:622 #: src/libslic3r/PrintConfig.cpp:447 src/libslic3r/PrintConfig.cpp:555 #: src/libslic3r/PrintConfig.cpp:877 src/libslic3r/PrintConfig.cpp:1010 #: src/libslic3r/PrintConfig.cpp:1418 src/libslic3r/PrintConfig.cpp:1764 #: src/libslic3r/PrintConfig.cpp:1954 src/libslic3r/PrintConfig.cpp:2113 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:626 #: src/slic3r/GUI/Tab.cpp:1154 src/slic3r/GUI/Tab.cpp:1169 #: src/slic3r/GUI/Tab.cpp:1269 src/slic3r/GUI/Tab.cpp:1272 #: src/slic3r/GUI/Tab.cpp:1536 src/slic3r/GUI/Tab.cpp:2000 #: src/slic3r/GUI/Tab.cpp:3730 src/libslic3r/PrintConfig.cpp:88 #: src/libslic3r/PrintConfig.cpp:119 src/libslic3r/PrintConfig.cpp:223 #: src/libslic3r/PrintConfig.cpp:1037 src/libslic3r/PrintConfig.cpp:2283 #: src/libslic3r/PrintConfig.cpp:2455 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/GUI_ObjectList.cpp:628 #: src/slic3r/GUI/Plater.cpp:502 src/slic3r/GUI/Tab.cpp:3671 #: src/slic3r/GUI/Tab.cpp:3672 src/libslic3r/PrintConfig.cpp:2621 #: src/libslic3r/PrintConfig.cpp:2628 src/libslic3r/PrintConfig.cpp:2637 #: src/libslic3r/PrintConfig.cpp:2646 src/libslic3r/PrintConfig.cpp:2656 #: src/libslic3r/PrintConfig.cpp:2692 src/libslic3r/PrintConfig.cpp:2699 #: src/libslic3r/PrintConfig.cpp:2710 src/libslic3r/PrintConfig.cpp:2720 #: src/libslic3r/PrintConfig.cpp:2729 src/libslic3r/PrintConfig.cpp:2742 #: src/libslic3r/PrintConfig.cpp:2752 src/libslic3r/PrintConfig.cpp:2761 #: src/libslic3r/PrintConfig.cpp:2771 src/libslic3r/PrintConfig.cpp:2782 #: src/libslic3r/PrintConfig.cpp:2790 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:107 src/slic3r/GUI/GUI_ObjectList.cpp:629 #: src/slic3r/GUI/Plater.cpp:642 src/slic3r/GUI/Tab.cpp:3705 #: src/slic3r/GUI/Tab.cpp:3706 src/libslic3r/PrintConfig.cpp:2798 #: src/libslic3r/PrintConfig.cpp:2805 src/libslic3r/PrintConfig.cpp:2819 #: src/libslic3r/PrintConfig.cpp:2830 src/libslic3r/PrintConfig.cpp:2840 #: src/libslic3r/PrintConfig.cpp:2862 src/libslic3r/PrintConfig.cpp:2873 #: src/libslic3r/PrintConfig.cpp:2880 src/libslic3r/PrintConfig.cpp:2887 #: src/libslic3r/PrintConfig.cpp:2898 src/libslic3r/PrintConfig.cpp:2907 #: src/libslic3r/PrintConfig.cpp:2916 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:108 src/slic3r/GUI/Tab.cpp:3723 #: src/slic3r/GUI/Tab.cpp:3724 src/libslic3r/SLA/Hollowing.cpp:46 #: src/libslic3r/SLA/Hollowing.cpp:58 src/libslic3r/SLA/Hollowing.cpp:67 #: src/libslic3r/SLA/Hollowing.cpp:76 src/libslic3r/PrintConfig.cpp:2926 #: src/libslic3r/PrintConfig.cpp:2933 src/libslic3r/PrintConfig.cpp:2943 #: src/libslic3r/PrintConfig.cpp:2952 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:282 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:290 src/slic3r/GUI/Tab.cpp:1500 #: src/slic3r/GUI/wxExtensions.cpp:598 src/libslic3r/PrintConfig.cpp:487 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:294 src/slic3r/GUI/GUI_ObjectList.cpp:407 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:352 #, possible-c-format msgid "Auto-repaired (%d errors):" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:359 msgid "degenerate facets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:360 msgid "edges fixed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:361 msgid "facets removed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:362 msgid "facets added" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:363 msgid "facets reversed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:364 msgid "backwards edges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:372 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:409 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:411 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:415 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:417 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:462 src/slic3r/GUI/GUI_ObjectList.cpp:474 #: src/slic3r/GUI/GUI_ObjectList.cpp:931 src/slic3r/GUI/GUI_ObjectList.cpp:4051 #: src/slic3r/GUI/GUI_ObjectList.cpp:4061 #: src/slic3r/GUI/GUI_ObjectList.cpp:4096 #: src/slic3r/GUI/ObjectDataViewModel.cpp:202 #: src/slic3r/GUI/ObjectDataViewModel.cpp:259 #: src/slic3r/GUI/ObjectDataViewModel.cpp:284 #: src/slic3r/GUI/ObjectDataViewModel.cpp:492 #: src/slic3r/GUI/ObjectDataViewModel.cpp:1755 msgid "default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:540 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:555 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:555 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1105 #: src/slic3r/GUI/GUI_ObjectList.cpp:3865 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1120 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1120 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1196 #: src/slic3r/GUI/GUI_ObjectList.cpp:1544 #: src/slic3r/GUI/GUI_ObjectList.cpp:1550 #: src/slic3r/GUI/GUI_ObjectList.cpp:1863 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1279 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1328 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1329 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1330 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1400 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1401 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1402 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1441 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1446 #: src/slic3r/GUI/GUI_ObjectList.cpp:1478 #: src/slic3r/GUI/GUI_ObjectList.cpp:1482 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1446 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1446 msgid "Sphere" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1446 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1514 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1523 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1603 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1613 #: src/slic3r/GUI/GUI_ObjectList.cpp:1625 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1625 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1635 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1650 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1661 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1671 src/slic3r/GUI/Plater.cpp:3970 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1678 #: src/slic3r/GUI/GUI_ObjectList.cpp:4040 src/slic3r/GUI/Plater.cpp:3938 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1685 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1738 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1738 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1807 #: src/slic3r/GUI/GUI_ObjectList.cpp:2065 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1893 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1932 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2007 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2036 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2154 #: src/slic3r/GUI/GUI_ObjectList.cpp:2256 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2166 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2190 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2206 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2237 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2241 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2260 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2284 src/slic3r/GUI/Plater.cpp:2978 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2288 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2342 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2468 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2480 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2493 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2497 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2502 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2508 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2514 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2521 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2521 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2707 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2844 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2920 #: src/slic3r/GUI/GUI_ObjectList.cpp:2948 #: src/slic3r/GUI/GUI_ObjectList.cpp:2968 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3014 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3018 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" "The gap between the current layer range and the next layer range\n" "is thinner than the minimum layer height allowed." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3023 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3082 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3375 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3383 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3501 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3502 #: src/slic3r/GUI/GUI_ObjectList.cpp:3635 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3502 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3504 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3505 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3506 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3509 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3514 #: src/slic3r/GUI/GUI_ObjectList.cpp:3589 src/slic3r/GUI/Plater.cpp:143 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3630 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3635 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3635 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3635 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3637 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3642 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3887 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3887 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3903 #: src/slic3r/GUI/GUI_ObjectList.cpp:4010 src/slic3r/GUI/Tab.cpp:3529 #: src/slic3r/GUI/Tab.cpp:3533 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3904 #: src/slic3r/GUI/GUI_ObjectList.cpp:4011 src/slic3r/GUI/Tab.cpp:3530 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4055 msgid "Select extruder number:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4056 msgid "This extruder will be set for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4081 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4178 src/slic3r/GUI/Selection.cpp:1481 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4178 src/slic3r/GUI/Selection.cpp:1481 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:105 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:106 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:82 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155 src/libslic3r/GCode.cpp:638 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:215 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:457 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:458 #: src/slic3r/GUI/Mouse3DController.cpp:295 #: src/slic3r/GUI/Mouse3DController.cpp:318 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:263 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:297 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:337 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:397 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:459 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:516 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:750 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:781 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:846 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:875 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:878 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:59 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:95 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:101 #, possible-c-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:152 #, possible-c-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:277 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:280 src/slic3r/GUI/GUI_Preview.cpp:641 #: src/libslic3r/GCode/PreviewData.cpp:346 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:281 src/libslic3r/PrintConfig.cpp:500 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:282 src/libslic3r/PrintConfig.cpp:2245 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:284 src/slic3r/GUI/Tab.cpp:1523 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:285 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:286 src/slic3r/GUI/GUI_Preview.cpp:401 #: src/slic3r/GUI/GUI_Preview.cpp:585 src/slic3r/GUI/GUI_Preview.cpp:640 #: src/slic3r/GUI/GUI_Preview.cpp:901 src/libslic3r/GCode/PreviewData.cpp:358 msgid "Tool" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:287 src/slic3r/GUI/GUI_Preview.cpp:638 #: src/libslic3r/GCode/PreviewData.cpp:360 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:290 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:293 src/slic3r/GUI/GUI_Preview.cpp:294 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:296 src/libslic3r/ExtrusionEntity.cpp:310 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:297 src/libslic3r/ExtrusionEntity.cpp:311 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:298 src/libslic3r/ExtrusionEntity.cpp:312 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:299 src/libslic3r/ExtrusionEntity.cpp:313 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:300 src/libslic3r/ExtrusionEntity.cpp:314 #: src/libslic3r/PrintConfig.cpp:1763 src/libslic3r/PrintConfig.cpp:1774 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:301 src/libslic3r/ExtrusionEntity.cpp:315 #: src/libslic3r/PrintConfig.cpp:2112 src/libslic3r/PrintConfig.cpp:2124 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:302 src/libslic3r/ExtrusionEntity.cpp:316 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:303 src/libslic3r/ExtrusionEntity.cpp:317 #: src/libslic3r/PrintConfig.cpp:918 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:304 src/slic3r/GUI/Tab.cpp:1178 #: src/libslic3r/ExtrusionEntity.cpp:318 msgid "Skirt" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:306 src/libslic3r/ExtrusionEntity.cpp:320 #: src/libslic3r/PrintConfig.cpp:1998 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:307 src/slic3r/GUI/Tab.cpp:1259 #: src/libslic3r/ExtrusionEntity.cpp:321 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:312 src/libslic3r/PrintConfig.cpp:2159 msgid "Travel" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:313 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:314 msgid "Unretractions" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:315 msgid "Shells" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:316 msgid "Legend" msgstr "" #: src/slic3r/GUI/Job.hpp:123 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:41 src/slic3r/GUI/MainFrame.cpp:855 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:112 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:114 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:116 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:119 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:120 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 src/slic3r/GUI/Plater.cpp:898 #: src/slic3r/GUI/Plater.cpp:5531 src/libslic3r/PrintConfig.cpp:3375 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Plater.cpp:5532 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:124 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:125 src/slic3r/GUI/Plater.cpp:887 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Eject SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:128 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:130 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:134 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 #: src/slic3r/GUI/PrintHostDialogs.cpp:136 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 msgid "Turn On/Off facets' slope rendering" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 src/slic3r/GUI/Preferences.cpp:10 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:157 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:165 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:168 #: src/slic3r/GUI/KBShortcutsDialog.cpp:210 #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:168 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:173 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:173 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:174 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:174 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:175 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:176 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:177 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:178 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:179 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:180 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:181 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:182 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:183 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:184 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:185 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:186 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:187 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:189 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 src/slic3r/GUI/MainFrame.cpp:311 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:200 #, possible-c-format msgid "" "Press to snap by 5% in Gizmo scale\n" "or to snap by 1mm in Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:201 msgid "" "Scale selection to fit print volume\n" "in Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:202 msgid "Press to activate one direction scaling in Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:203 msgid "" "Press to scale (in Gizmo scale) or rotate (in Gizmo rotate)\n" "selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:206 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 #: src/slic3r/GUI/KBShortcutsDialog.cpp:211 msgid "Upper Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:210 #: src/slic3r/GUI/KBShortcutsDialog.cpp:212 msgid "Lower Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:213 msgid "Show/Hide Legend" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:216 src/slic3r/GUI/Plater.cpp:4129 #: src/slic3r/GUI/Tab.cpp:2385 msgid "Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 msgid "Move current slider thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 msgid "Move current slider thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 msgid "Set upper thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Set lower thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 msgid "Layers Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:250 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:72 msgid "" " - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/" "releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:281 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:533 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:533 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:536 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:536 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:541 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:550 msgid "" "The selected project is no longer available.\n" "Do you want to remove it from the recent projects list?" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:550 src/slic3r/GUI/MainFrame.cpp:932 #: src/slic3r/GUI/PrintHostDialogs.cpp:231 msgid "Error" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:575 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:575 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:579 src/slic3r/GUI/MainFrame.cpp:581 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:579 src/slic3r/GUI/MainFrame.cpp:581 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:589 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:589 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:593 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:593 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:596 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:596 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:600 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:600 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:603 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:606 src/slic3r/GUI/MainFrame.cpp:896 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:606 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:610 src/slic3r/GUI/MainFrame.cpp:897 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:610 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:614 msgid "Export G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:614 msgid "Export current plate as G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:618 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:618 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:621 msgid "Export plate as STL &including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:621 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:624 msgid "Export plate as &AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:624 msgid "Export current plate as AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:628 msgid "Export &toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:628 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:632 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:632 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:635 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:635 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:638 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:640 msgid "Ejec&t SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:640 msgid "Eject SD card / Flash drive after the G-code was exported to it." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:648 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:648 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:654 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:654 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:660 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:660 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:668 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:668 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:672 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:672 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:676 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:676 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:701 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:702 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:704 msgid "D&eselect all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:705 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:708 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:709 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:711 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:712 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:716 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:719 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:724 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:725 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:727 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:728 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:732 msgid "Re&load from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:733 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:742 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:742 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:750 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:750 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:753 src/slic3r/GUI/MainFrame.cpp:899 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:753 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:757 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:757 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:762 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:762 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:765 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:765 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:784 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:784 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:794 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:794 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:798 src/libslic3r/PrintConfig.cpp:2139 #: src/libslic3r/PrintConfig.cpp:2148 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:798 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:801 src/libslic3r/PrintConfig.cpp:174 #: src/libslic3r/PrintConfig.cpp:183 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:801 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:803 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:803 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:805 src/libslic3r/PrintConfig.cpp:1632 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:805 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:807 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:807 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:809 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:809 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:814 src/slic3r/GUI/MainFrame.cpp:822 msgid "Show &labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:814 src/slic3r/GUI/MainFrame.cpp:822 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:817 msgid "Show &slope" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:817 msgid "Objects coloring using faces' slope" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:820 msgid "&Options" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:831 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:831 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:833 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:833 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:839 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:840 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:846 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:846 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:848 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:848 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:850 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:850 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:852 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:852 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:855 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:868 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:869 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:870 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:871 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:874 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:896 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:897 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:899 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:920 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:931 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:937 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:937 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:938 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:973 #, possible-c-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:973 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:973 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:985 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:994 src/slic3r/GUI/Plater.cpp:3121 #: src/slic3r/GUI/Plater.cpp:5122 src/slic3r/GUI/Tab.cpp:1289 #: src/slic3r/GUI/Tab.cpp:3731 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:996 #, possible-c-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1019 msgid " was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1021 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1036 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1046 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1058 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1058 src/libslic3r/PrintConfig.cpp:3469 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1072 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1091 src/slic3r/GUI/MainFrame.cpp:1153 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1127 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1174 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:263 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:278 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:285 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:289 #: src/slic3r/GUI/Mouse3DController.cpp:312 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:301 #: src/slic3r/GUI/Mouse3DController.cpp:312 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:308 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:325 msgid "Options:" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:73 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:74 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:58 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:62 #: src/slic3r/GUI/ObjectDataViewModel.cpp:218 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3585 #: src/slic3r/GUI/Tab.cpp:3667 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 msgid "Range" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:274 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:274 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/Plater.cpp:163 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:164 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:165 msgid "Materials" msgstr "" #: src/slic3r/GUI/Plater.cpp:168 msgid "Manifold" msgstr "" #: src/slic3r/GUI/Plater.cpp:218 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1236 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:238 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:239 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:240 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:241 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1223 #: src/slic3r/GUI/Plater.cpp:1265 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/Plater.cpp:243 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:350 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/Plater.cpp:505 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:507 src/libslic3r/PrintConfig.cpp:1908 #: src/libslic3r/PrintConfig.cpp:2691 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:508 src/slic3r/GUI/Plater.cpp:631 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:509 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:541 src/slic3r/GUI/Tab.cpp:1185 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:543 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:551 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:645 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:647 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:648 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:822 msgid "Print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:823 src/slic3r/GUI/Tab.cpp:1491 #: src/slic3r/GUI/Tab.cpp:1492 msgid "Filament" msgstr "" #: src/slic3r/GUI/Plater.cpp:824 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:825 src/slic3r/GUI/Preset.cpp:1566 msgid "SLA material" msgstr "" #: src/slic3r/GUI/Plater.cpp:826 msgid "Printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:885 src/slic3r/GUI/Plater.cpp:5532 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:886 msgid "Remove device" msgstr "" #: src/slic3r/GUI/Plater.cpp:899 src/slic3r/GUI/Plater.cpp:3121 #: src/slic3r/GUI/Plater.cpp:5125 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:1049 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1159 #, possible-c-format msgid "%d (%d shells)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1164 #, possible-c-format msgid "Auto-repaired (%d errors)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1167 #, possible-c-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" #: src/slic3r/GUI/Plater.cpp:1177 msgid "Yes" msgstr "" #: src/slic3r/GUI/Plater.cpp:1198 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1201 msgid "object(s)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1201 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1238 src/slic3r/GUI/Plater.cpp:1252 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1238 src/slic3r/GUI/Plater.cpp:1252 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1250 src/libslic3r/PrintConfig.cpp:760 #: src/libslic3r/PrintConfig.cpp:2517 src/libslic3r/PrintConfig.cpp:2518 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1267 src/libslic3r/PrintConfig.cpp:582 msgid "Color" msgstr "" #: src/slic3r/GUI/Plater.cpp:1268 msgid "Pause" msgstr "" #: src/slic3r/GUI/Plater.cpp:1293 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1298 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1402 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:1406 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:2207 #, possible-c-format msgid "" "Unmounting successful. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:2210 #, possible-c-format msgid "Ejecting of device %s(%s) has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2223 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2337 msgid "Loading" msgstr "" #: src/slic3r/GUI/Plater.cpp:2347 #, possible-c-format msgid "Processing input file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:2375 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Plater.cpp:2376 src/slic3r/GUI/Tab.cpp:2958 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/Plater.cpp:2421 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should I consider\n" "this file as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2424 src/slic3r/GUI/Plater.cpp:2477 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2431 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2432 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2454 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2474 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2490 msgid "Loaded" msgstr "" #: src/slic3r/GUI/Plater.cpp:2592 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2593 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2655 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2662 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2668 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2674 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2773 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2784 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2823 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:2869 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Plater.cpp:2896 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Plater.cpp:2902 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Plater.cpp:2903 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Plater.cpp:2919 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:2952 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Plater.cpp:2953 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Plater.cpp:2970 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "" #: src/slic3r/GUI/Plater.cpp:2981 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3106 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:3115 msgid "Ready to slice" msgstr "" #: src/slic3r/GUI/Plater.cpp:3153 src/slic3r/GUI/PrintHostDialogs.cpp:232 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/Plater.cpp:3170 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3286 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3321 msgid "It is not allowed to change the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3321 msgid "Do you want to retry" msgstr "" #: src/slic3r/GUI/Plater.cpp:3339 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3428 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3433 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3452 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3473 msgid "Fix Throught NetFabb" msgstr "" #: src/slic3r/GUI/Plater.cpp:3672 msgid "Export failed" msgstr "" #: src/slic3r/GUI/Plater.cpp:3682 src/slic3r/GUI/PrintHostDialogs.cpp:233 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/Plater.cpp:3935 src/slic3r/GUI/Plater.cpp:3957 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3944 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3946 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3948 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:3948 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3967 msgid "Reload the selected object from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3970 msgid "Export the selected object as STL file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3999 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3999 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4001 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4001 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4003 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4003 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4006 msgid "Mirror" msgstr "" #: src/slic3r/GUI/Plater.cpp:4006 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4018 msgid "To objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4018 src/slic3r/GUI/Plater.cpp:4038 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4020 msgid "To parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:4020 src/slic3r/GUI/Plater.cpp:4052 msgid "Split the selected object into individual sub-parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:4023 src/slic3r/GUI/Plater.cpp:4038 #: src/slic3r/GUI/Plater.cpp:4052 src/libslic3r/PrintConfig.cpp:3493 msgid "Split" msgstr "" #: src/slic3r/GUI/Plater.cpp:4023 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4044 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:4044 msgid "Optimize the rotation of the object for better print results." msgstr "" #: src/slic3r/GUI/Plater.cpp:4121 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4428 msgid "" "%1% printer was active at the time the target Undo / Redo snapshot was " "taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" #: src/slic3r/GUI/Plater.cpp:4604 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:4632 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4636 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4705 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:4713 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4721 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4756 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4787 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4788 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4792 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:4822 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:4873 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4873 msgid "Save SL1 file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5008 #, possible-c-format msgid "STL file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5025 #, possible-c-format msgid "AMF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5028 #, possible-c-format msgid "Error exporting AMF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5057 #, possible-c-format msgid "3MF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5062 #, possible-c-format msgid "Error exporting 3MF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5531 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:5617 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:22 src/slic3r/GUI/Tab.cpp:1857 #: src/slic3r/GUI/Tab.cpp:2069 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:39 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:41 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:47 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:49 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:55 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:57 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:66 msgid "" "If enabled, PrusaSlicer will check for the new versions of itself online. " "When a new version becomes available a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/Preferences.cpp:72 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:74 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:82 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:87 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:89 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:95 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:97 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:104 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:106 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:113 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:119 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:121 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:126 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:128 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:133 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:143 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:145 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:172 #, possible-c-format msgid "You need to restart %s to make the changes effective." msgstr "" #: src/slic3r/GUI/Preferences.cpp:222 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:237 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preset.cpp:250 msgid "modified" msgstr "" #: src/slic3r/GUI/Preset.cpp:1151 src/slic3r/GUI/Preset.cpp:1206 #: src/slic3r/GUI/Preset.cpp:1284 src/slic3r/GUI/Preset.cpp:1326 #: src/slic3r/GUI/PresetBundle.cpp:1599 src/slic3r/GUI/PresetBundle.cpp:1697 msgid "System presets" msgstr "" #: src/slic3r/GUI/Preset.cpp:1210 src/slic3r/GUI/Preset.cpp:1330 #: src/slic3r/GUI/PresetBundle.cpp:1702 msgid "User presets" msgstr "" #: src/slic3r/GUI/Preset.cpp:1243 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/Preset.cpp:1245 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/Preset.cpp:1564 msgid "filament" msgstr "" #: src/slic3r/GUI/Preset.cpp:1565 msgid "SLA print" msgstr "" #: src/slic3r/GUI/PresetBundle.cpp:1729 msgid "Add/Remove filaments" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:29 msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:36 msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:40 msgid "During the other layers, fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:42 msgid "Fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:48 msgid "will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:51 msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:53 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:55 msgid "will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:156 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:165 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:174 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:184 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:192 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:203 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:213 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:220 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:223 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:224 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:225 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:229 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:247 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:263 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:270 #, possible-c-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:274 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:304 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:317 msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:320 msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:323 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:336 msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:339 msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:342 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:35 msgid "Start printing after upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:42 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:149 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:150 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:151 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:152 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:153 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:154 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:157 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:159 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:198 #: src/slic3r/GUI/PrintHostDialogs.cpp:229 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:230 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:234 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:272 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:23 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 msgid "Time" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83 #: src/libslic3r/PrintConfig.cpp:644 src/libslic3r/PrintConfig.cpp:688 #: src/libslic3r/PrintConfig.cpp:703 src/libslic3r/PrintConfig.cpp:2415 #: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2534 #: src/libslic3r/PrintConfig.cpp:2542 src/libslic3r/PrintConfig.cpp:2550 #: src/libslic3r/PrintConfig.cpp:2557 src/libslic3r/PrintConfig.cpp:2565 #: src/libslic3r/PrintConfig.cpp:2573 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:601 #: src/libslic3r/PrintConfig.cpp:1250 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/Selection.cpp:147 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:188 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:220 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:239 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:257 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:276 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:377 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:403 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:946 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/Selection.cpp:1483 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:1483 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:78 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:158 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:51 src/libslic3r/PrintConfig.cpp:265 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:52 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:57 src/libslic3r/PrintConfig.cpp:280 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:58 msgid "Select the print profiles this profile is compatible with." msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:134 #, possible-c-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:135 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:140 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:248 msgid "Add a new printer" msgstr "" #: src/slic3r/GUI/Tab.cpp:970 msgid "Detach from system preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:982 msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:983 msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:986 msgid "Modifications to the current profile will be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:989 msgid "" "This action is not revertable.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:991 msgid "Detach preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1017 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1019 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1021 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1023 msgid "Current preset is inherited from" msgstr "" #: src/slic3r/GUI/Tab.cpp:1027 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:1028 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:1029 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1033 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:1039 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:1047 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1050 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1064 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1068 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1076 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1077 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1115 src/slic3r/GUI/Tab.cpp:3665 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1120 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1131 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1132 src/libslic3r/PrintConfig.cpp:1787 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1136 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1147 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1165 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1177 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/Tab.cpp:1195 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1199 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1214 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1226 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1229 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1232 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1239 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1247 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1255 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1273 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1283 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1286 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1295 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1298 src/slic3r/GUI/Tab.cpp:3734 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1299 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1301 msgid "Extruder clearance (mm)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1306 src/slic3r/GUI/Tab.cpp:3735 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1313 src/libslic3r/PrintConfig.cpp:1453 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1319 src/slic3r/GUI/Tab.cpp:1320 #: src/slic3r/GUI/Tab.cpp:1606 src/slic3r/GUI/Tab.cpp:1607 #: src/slic3r/GUI/Tab.cpp:2045 src/slic3r/GUI/Tab.cpp:2046 #: src/slic3r/GUI/Tab.cpp:2127 src/slic3r/GUI/Tab.cpp:2128 #: src/slic3r/GUI/Tab.cpp:3608 src/slic3r/GUI/Tab.cpp:3609 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1326 src/slic3r/GUI/Tab.cpp:1614 #: src/slic3r/GUI/Tab.cpp:2052 src/slic3r/GUI/Tab.cpp:2134 #: src/slic3r/GUI/Tab.cpp:3616 src/slic3r/GUI/Tab.cpp:3740 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1327 src/slic3r/GUI/Tab.cpp:1615 #: src/slic3r/GUI/Tab.cpp:2053 src/slic3r/GUI/Tab.cpp:2135 #: src/slic3r/GUI/Tab.cpp:3617 src/slic3r/GUI/Tab.cpp:3741 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1389 src/slic3r/GUI/Tab.cpp:1444 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1390 src/slic3r/GUI/Tab.cpp:1449 #: src/slic3r/GUI/Tab.cpp:2365 msgid "Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:1499 src/libslic3r/PrintConfig.cpp:2074 msgid "Temperature" msgstr "" #: src/slic3r/GUI/Tab.cpp:1505 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1510 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1511 src/libslic3r/PrintConfig.cpp:1355 #: src/libslic3r/PrintConfig.cpp:2207 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1522 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1531 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1537 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1544 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1554 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1557 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1571 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1593 src/slic3r/GUI/Tab.cpp:2008 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1594 src/slic3r/GUI/Tab.cpp:2009 #: src/libslic3r/PrintConfig.cpp:1820 src/libslic3r/PrintConfig.cpp:1835 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1600 src/slic3r/GUI/Tab.cpp:2015 #: src/libslic3r/PrintConfig.cpp:385 src/libslic3r/PrintConfig.cpp:395 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1649 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:1735 src/slic3r/GUI/Tab.cpp:1948 msgid "Test" msgstr "" #: src/slic3r/GUI/Tab.cpp:1744 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/Tab.cpp:1750 src/slic3r/GUI/Tab.cpp:1961 msgid "Success!" msgstr "" #: src/slic3r/GUI/Tab.cpp:1770 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/Tab.cpp:1785 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/Tab.cpp:1786 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1813 src/libslic3r/PrintConfig.cpp:111 msgid "HTTPS CA File" msgstr "" #: src/slic3r/GUI/Tab.cpp:1814 #, possible-c-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" #: src/slic3r/GUI/Tab.cpp:1815 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" #: src/slic3r/GUI/Tab.cpp:1858 src/slic3r/GUI/Tab.cpp:2070 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:1867 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:1872 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:1900 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1903 src/slic3r/GUI/Tab.cpp:2335 #: src/libslic3r/PrintConfig.cpp:1326 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:1933 msgid "USB/Serial connection" msgstr "" #: src/slic3r/GUI/Tab.cpp:1934 src/libslic3r/PrintConfig.cpp:1661 msgid "Serial port" msgstr "" #: src/slic3r/GUI/Tab.cpp:1939 msgid "Rescan serial ports" msgstr "" #: src/slic3r/GUI/Tab.cpp:1961 msgid "Connection to printer works correctly." msgstr "" #: src/slic3r/GUI/Tab.cpp:1964 msgid "Connection failed." msgstr "" #: src/slic3r/GUI/Tab.cpp:1977 src/slic3r/GUI/Tab.cpp:2122 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/Tab.cpp:2021 src/libslic3r/PrintConfig.cpp:153 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2027 src/libslic3r/PrintConfig.cpp:1080 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2033 src/libslic3r/PrintConfig.cpp:2100 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2039 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2077 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2092 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2093 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2099 src/slic3r/GUI/Tab.cpp:3592 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2116 src/slic3r/GUI/Tab.cpp:3588 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2183 src/slic3r/GUI/Tab.cpp:2268 #: src/libslic3r/PrintConfig.cpp:1129 src/libslic3r/PrintConfig.cpp:1146 #: src/libslic3r/PrintConfig.cpp:1163 src/libslic3r/PrintConfig.cpp:1179 #: src/libslic3r/PrintConfig.cpp:1189 src/libslic3r/PrintConfig.cpp:1199 #: src/libslic3r/PrintConfig.cpp:1209 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2197 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2198 msgid "Normal" msgstr "" #: src/slic3r/GUI/Tab.cpp:2203 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2204 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Tab.cpp:2212 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2217 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2224 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2229 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2293 src/slic3r/GUI/Tab.cpp:2301 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2302 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2333 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2357 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2362 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2368 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2381 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2389 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:2570 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2572 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:2918 #, possible-c-format msgid "Default preset (%s)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2919 #, possible-c-format msgid "Preset (%s)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2936 msgid "has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/Tab.cpp:2939 msgid "is not compatible with printer" msgstr "" #: src/slic3r/GUI/Tab.cpp:2940 msgid "is not compatible with print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:2942 msgid "and it has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/Tab.cpp:2946 msgid "Unsaved Changes" msgstr "" #: src/slic3r/GUI/Tab.cpp:3040 msgid "Detached" msgstr "" #: src/slic3r/GUI/Tab.cpp:3040 msgctxt "PresetName" msgid "Copy" msgstr "" #: src/slic3r/GUI/Tab.cpp:3069 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:3074 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/Tab.cpp:3078 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/Tab.cpp:3083 msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/Tab.cpp:3084 msgid "Replace?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3152 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3152 msgid "delete" msgstr "" #. TRN remove/delete #: src/slic3r/GUI/Tab.cpp:3154 msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3157 msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3216 src/slic3r/GUI/Tab.cpp:3286 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:3325 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3327 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3329 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3331 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3336 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3338 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3341 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3343 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3353 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3355 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3358 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3361 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3363 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3369 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3370 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3376 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3377 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #. TRN Preset #: src/slic3r/GUI/Tab.cpp:3490 #, possible-c-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3534 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3538 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/Tab.cpp:3551 src/slic3r/GUI/Tab.cpp:3553 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:3675 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:3680 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:3696 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:3701 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.hpp:336 src/slic3r/GUI/Tab.hpp:441 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:363 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:399 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:426 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:453 msgid "Save preset" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:43 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:53 msgid "Changelog && Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125 #: src/slic3r/GUI/UpdateDialogs.cpp:183 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:71 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:92 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:151 #, possible-c-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:211 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:216 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:225 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:230 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:249 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:270 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:287 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:309 #, possible-c-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:15 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:41 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:83 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:85 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:89 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:91 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:142 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:254 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:255 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:263 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:264 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:276 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:285 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:286 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:365 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:706 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:707 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:69 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:84 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:90 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:92 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:49 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:55 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:139 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:133 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:136 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:219 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:235 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:242 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:248 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:251 #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:263 #: src/slic3r/Utils/FixModelByWin10.cpp:270 #: src/slic3r/Utils/FixModelByWin10.cpp:302 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:340 msgid "Model fixing" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:341 msgid "Exporting model..." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:368 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:383 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:385 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:387 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:391 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:406 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 msgid "Model repaired successfully" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model Repair by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model repair failed:" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:74 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:76 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:84 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:90 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:92 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:179 msgid "Connection to Prusa SL1 works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:185 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:706 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:710 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:713 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/libslic3r/SLA/Pad.cpp:691 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/Zipper.cpp:32 msgid "undefined error" msgstr "" #: src/libslic3r/Zipper.cpp:34 msgid "too many files" msgstr "" #: src/libslic3r/Zipper.cpp:36 msgid "file too large" msgstr "" #: src/libslic3r/Zipper.cpp:38 msgid "unsupported method" msgstr "" #: src/libslic3r/Zipper.cpp:40 msgid "unsupported encryption" msgstr "" #: src/libslic3r/Zipper.cpp:42 msgid "unsupported feature" msgstr "" #: src/libslic3r/Zipper.cpp:44 msgid "failed finding central directory" msgstr "" #: src/libslic3r/Zipper.cpp:46 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/Zipper.cpp:48 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/Zipper.cpp:50 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/Zipper.cpp:52 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/Zipper.cpp:54 msgid "compression failed" msgstr "" #: src/libslic3r/Zipper.cpp:56 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/Zipper.cpp:58 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/Zipper.cpp:60 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/Zipper.cpp:62 msgid "allocation failed" msgstr "" #: src/libslic3r/Zipper.cpp:64 msgid "file open failed" msgstr "" #: src/libslic3r/Zipper.cpp:66 msgid "file create failed" msgstr "" #: src/libslic3r/Zipper.cpp:68 msgid "file write failed" msgstr "" #: src/libslic3r/Zipper.cpp:70 msgid "file read failed" msgstr "" #: src/libslic3r/Zipper.cpp:72 msgid "file close failed" msgstr "" #: src/libslic3r/Zipper.cpp:74 msgid "file seek failed" msgstr "" #: src/libslic3r/Zipper.cpp:76 msgid "file stat failed" msgstr "" #: src/libslic3r/Zipper.cpp:78 msgid "invalid parameter" msgstr "" #: src/libslic3r/Zipper.cpp:80 msgid "invalid filename" msgstr "" #: src/libslic3r/Zipper.cpp:82 msgid "buffer too small" msgstr "" #: src/libslic3r/Zipper.cpp:84 msgid "internal error" msgstr "" #: src/libslic3r/Zipper.cpp:86 msgid "file not found" msgstr "" #: src/libslic3r/Zipper.cpp:88 msgid "archive is too large" msgstr "" #: src/libslic3r/Zipper.cpp:90 msgid "validation failed" msgstr "" #: src/libslic3r/Zipper.cpp:92 msgid "write calledback failed" msgstr "" #: src/libslic3r/Zipper.cpp:102 msgid "Error with zip archive" msgstr "" #: src/libslic3r/GCode.cpp:637 msgid "Empty layers detected, the output would not be printable." msgstr "" #: src/libslic3r/GCode.cpp:638 msgid "Print z" msgstr "" #: src/libslic3r/GCode.cpp:639 msgid "" "This is usually caused by negligibly small extrusions or by a faulty model. " "Try to repair the model or change its orientation on the bed." msgstr "" #: src/libslic3r/ExtrusionEntity.cpp:323 msgid "Mixed" msgstr "" #: src/libslic3r/Flow.cpp:61 msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1626 msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:934 msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Print.cpp:1218 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:1221 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:1225 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:1227 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:1236 msgid "The Spiral Vase option can only be used when printing a single object." msgstr "" #: src/libslic3r/Print.cpp:1243 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:1256 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:1261 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " "and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:1263 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:1265 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" #: src/libslic3r/Print.cpp:1267 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:1269 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:1290 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:1292 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:1294 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:1296 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:1338 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:1364 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:1373 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1376 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1387 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:1395 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:1399 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:1421 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1426 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1583 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:1605 msgid "Generating skirt" msgstr "" #: src/libslic3r/Print.cpp:1613 msgid "Generating brim" msgstr "" #: src/libslic3r/Print.cpp:1633 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:1637 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLAPrint.cpp:615 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:627 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:633 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:648 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:655 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:762 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:43 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:44 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:45 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:46 src/libslic3r/SLAPrintSteps.cpp:356 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:47 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:48 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:64 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:65 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:190 msgid "Too much overlapping holes." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:199 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:245 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:413 src/libslic3r/SLAPrintSteps.cpp:422 #: src/libslic3r/SLAPrintSteps.cpp:461 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:453 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:621 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:71 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:51 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:56 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:61 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:66 msgid "Picture sizes to be stored into a .gcode and .sl1 files" msgstr "" #: src/libslic3r/PrintConfig.cpp:73 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:80 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:81 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:87 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:89 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:97 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:98 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance." msgstr "" #: src/libslic3r/PrintConfig.cpp:104 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:105 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:112 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:118 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:120 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:136 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:137 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:144 src/libslic3r/PrintConfig.cpp:2071 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:145 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:147 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:154 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:164 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:165 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:176 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:177 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:185 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:187 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:193 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:194 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:196 src/libslic3r/PrintConfig.cpp:339 #: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:984 #: src/libslic3r/PrintConfig.cpp:1152 src/libslic3r/PrintConfig.cpp:1201 #: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1403 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:202 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:204 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:207 src/libslic3r/PrintConfig.cpp:780 #: src/libslic3r/PrintConfig.cpp:1640 src/libslic3r/PrintConfig.cpp:1650 #: src/libslic3r/PrintConfig.cpp:1901 src/libslic3r/PrintConfig.cpp:2056 #: src/libslic3r/PrintConfig.cpp:2254 src/libslic3r/PrintConfig.cpp:2744 #: src/libslic3r/PrintConfig.cpp:2865 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:213 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:214 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:215 src/libslic3r/PrintConfig.cpp:792 #: src/libslic3r/PrintConfig.cpp:1219 src/libslic3r/PrintConfig.cpp:1282 #: src/libslic3r/PrintConfig.cpp:1532 src/libslic3r/PrintConfig.cpp:2432 #: src/libslic3r/PrintConfig.cpp:2784 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:222 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:224 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:234 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:236 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:609 #: src/libslic3r/PrintConfig.cpp:617 src/libslic3r/PrintConfig.cpp:626 #: src/libslic3r/PrintConfig.cpp:634 src/libslic3r/PrintConfig.cpp:661 #: src/libslic3r/PrintConfig.cpp:680 src/libslic3r/PrintConfig.cpp:922 #: src/libslic3r/PrintConfig.cpp:1050 src/libslic3r/PrintConfig.cpp:1135 #: src/libslic3r/PrintConfig.cpp:1169 src/libslic3r/PrintConfig.cpp:1181 #: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1241 #: src/libslic3r/PrintConfig.cpp:1300 src/libslic3r/PrintConfig.cpp:1433 #: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1616 #: src/libslic3r/PrintConfig.cpp:2035 src/libslic3r/PrintConfig.cpp:2161 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:244 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:245 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:252 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:253 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:260 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:261 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:271 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:272 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:286 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:287 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:304 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:305 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:313 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:314 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:319 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:320 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:327 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:328 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:336 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:345 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:346 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:352 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:353 src/libslic3r/PrintConfig.cpp:2599 #: src/libslic3r/PrintConfig.cpp:2610 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:359 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:360 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:369 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:371 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:377 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:378 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:386 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:396 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:407 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:409 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:415 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:417 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:843 #: src/libslic3r/PrintConfig.cpp:2016 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:849 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:427 src/libslic3r/PrintConfig.cpp:853 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:428 src/libslic3r/PrintConfig.cpp:854 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:429 src/libslic3r/PrintConfig.cpp:855 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:435 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:437 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:446 src/libslic3r/PrintConfig.cpp:457 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:448 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:560 #: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:895 #: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1041 #: src/libslic3r/PrintConfig.cpp:1423 src/libslic3r/PrintConfig.cpp:1768 #: src/libslic3r/PrintConfig.cpp:1890 src/libslic3r/PrintConfig.cpp:1958 #: src/libslic3r/PrintConfig.cpp:2118 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:459 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:462 src/libslic3r/PrintConfig.cpp:904 #: src/libslic3r/PrintConfig.cpp:1727 src/libslic3r/PrintConfig.cpp:1779 #: src/libslic3r/PrintConfig.cpp:2002 src/libslic3r/PrintConfig.cpp:2131 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:469 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:471 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:477 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:479 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:489 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:501 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:512 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:522 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:583 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:529 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:530 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:539 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:540 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:545 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:546 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:554 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:556 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:566 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:567 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:572 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:573 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:1715 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:588 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:589 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:597 src/libslic3r/PrintConfig.cpp:1247 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:598 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:607 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:608 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:615 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:616 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:623 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:624 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:632 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:633 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:640 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:641 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:650 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:651 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:659 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:660 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:667 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:668 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:672 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:678 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:679 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:686 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:687 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:694 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:695 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:701 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:702 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:710 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:717 src/libslic3r/PrintConfig.cpp:2510 #: src/libslic3r/PrintConfig.cpp:2511 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:718 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:721 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:726 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:727 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:754 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:755 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:761 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:762 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:2594 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:775 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:777 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:789 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:791 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:826 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:828 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:844 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:845 msgid "Triangles" msgstr "" #: src/libslic3r/PrintConfig.cpp:846 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:847 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:848 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:2018 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:851 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:852 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:859 src/libslic3r/PrintConfig.cpp:868 #: src/libslic3r/PrintConfig.cpp:876 src/libslic3r/PrintConfig.cpp:910 msgid "First layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:860 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:869 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:878 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:891 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates. This can be expressed as an absolute value or as a percentage (for " "example: 150%) over the default layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:900 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:901 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:911 msgid "" "Extruder temperature for first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output file." msgstr "" #: src/libslic3r/PrintConfig.cpp:920 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:928 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:929 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:936 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:937 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:960 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:965 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:966 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:973 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:974 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:982 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:990 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:992 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:995 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1001 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1003 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1011 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1021 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1022 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1027 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1029 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1036 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1038 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1049 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1057 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1058 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1071 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1072 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1081 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1092 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1093 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1101 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1102 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1125 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1126 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1127 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1128 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1131 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1132 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1133 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1134 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1142 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1143 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1144 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1145 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1148 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1149 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1150 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1151 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1159 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1160 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1161 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1162 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1165 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1166 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1167 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1168 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1178 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1180 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1188 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1190 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1198 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1200 msgid "Maximum acceleration when extruding (M204 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1208 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1210 msgid "Maximum acceleration when retracting (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1217 src/libslic3r/PrintConfig.cpp:1226 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1218 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1227 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1237 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1238 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1248 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1257 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1258 src/libslic3r/PrintConfig.cpp:1269 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1262 src/libslic3r/PrintConfig.cpp:1273 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1268 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1280 src/libslic3r/PrintConfig.cpp:1289 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1281 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1290 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1298 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1299 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1306 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1307 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1316 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1317 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1327 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1332 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1333 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1348 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1349 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1356 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1363 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1364 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1373 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1375 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1381 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1382 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1390 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1391 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1417 #: src/libslic3r/PrintConfig.cpp:1430 src/libslic3r/PrintConfig.cpp:1440 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1400 msgid "" "This is the acceleration your printer will use for perimeters. A high value " "like 9000 usually gives good results if your hardware is up to the job. Set " "zero to disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1408 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1410 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1419 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1432 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1442 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1446 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1454 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1466 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1467 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1472 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1473 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:1481 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1482 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:1487 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:1488 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1501 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1503 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:1511 msgid "Resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:1512 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:1522 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1523 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:1529 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:1530 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1537 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1538 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1544 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1545 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1547 src/libslic3r/PrintConfig.cpp:1556 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1552 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1553 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1561 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1562 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:1569 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1570 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:1571 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1578 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1579 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1580 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1588 src/libslic3r/PrintConfig.cpp:1596 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:1589 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1597 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:1604 src/libslic3r/PrintConfig.cpp:1605 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1606 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1612 src/libslic3r/PrintConfig.cpp:1613 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1614 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:1621 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1623 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:1629 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:1630 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:1631 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:1639 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1641 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:1642 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1649 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1651 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1652 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1662 msgid "USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1669 msgid "Serial port speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1670 msgid "Speed (baud) of USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1679 msgid "Distance from object" msgstr "" #: src/libslic3r/PrintConfig.cpp:1680 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" #: src/libslic3r/PrintConfig.cpp:1687 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:1688 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "" #: src/libslic3r/PrintConfig.cpp:1695 msgid "Draft shield" msgstr "" #: src/libslic3r/PrintConfig.cpp:1696 msgid "" "If enabled, the skirt will be as tall as a highest printed object. This is " "useful to protect an ABS or ASA print from warping and detaching from print " "bed due to wind draft." msgstr "" #: src/libslic3r/PrintConfig.cpp:1702 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1703 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1704 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:1712 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1713 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:1722 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1724 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1734 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:1736 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:1737 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1743 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1745 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1751 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1753 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1765 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1776 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1788 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:1794 src/libslic3r/PrintConfig.cpp:1795 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:1801 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:1802 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than an object." msgstr "" #: src/libslic3r/PrintConfig.cpp:1810 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:1811 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:1821 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:1836 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:1852 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1853 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:1858 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:1859 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1864 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1865 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1872 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1874 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:1878 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:1880 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:1886 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:1888 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1898 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:1900 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:1910 src/libslic3r/PrintConfig.cpp:2693 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1916 msgid "Contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1918 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1925 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1926 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1931 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:1933 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:1938 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1944 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1946 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1955 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1964 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1966 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:1971 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1973 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:1980 msgid "Interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1982 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1989 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1991 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2000 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2009 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2011 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2017 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2023 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2025 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2034 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2041 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2043 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2049 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2051 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2063 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2065 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2072 msgid "" "Extruder temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:2080 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2082 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2088 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2089 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2101 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {previous_extruder} and " "{next_extruder} can be used. When a tool-changing command which changes to " "the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2114 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2126 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2141 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2142 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2150 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2153 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2160 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2168 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2169 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2175 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2176 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2182 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2183 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2193 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2194 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2200 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2201 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2208 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2214 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2215 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2221 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2222 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2231 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2232 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2238 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2239 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2246 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2252 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2253 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2260 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2261 msgid "" "Purging after toolchange will done inside this object's infills. This lowers " "the amount of waste but may result in longer print time due to additional " "travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2268 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2269 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:2275 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2276 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:2282 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2284 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:2292 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:2293 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2360 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2361 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2366 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2367 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2372 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:2374 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2380 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2385 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2386 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:2387 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2392 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2393 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:2394 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2399 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2400 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:2406 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:2407 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:2412 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:2413 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2414 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2421 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:2422 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2423 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2430 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2431 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2438 src/libslic3r/PrintConfig.cpp:2439 #: src/libslic3r/PrintConfig.cpp:2440 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2446 src/libslic3r/PrintConfig.cpp:2447 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2448 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:2454 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2456 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2463 src/libslic3r/PrintConfig.cpp:2464 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2465 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:2477 src/libslic3r/PrintConfig.cpp:2478 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:2489 src/libslic3r/PrintConfig.cpp:2490 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2496 src/libslic3r/PrintConfig.cpp:2497 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:2498 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2503 src/libslic3r/PrintConfig.cpp:2504 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:2505 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:2512 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2519 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2524 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2525 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2532 src/libslic3r/PrintConfig.cpp:2533 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2540 src/libslic3r/PrintConfig.cpp:2541 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2548 src/libslic3r/PrintConfig.cpp:2549 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2555 src/libslic3r/PrintConfig.cpp:2556 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2563 src/libslic3r/PrintConfig.cpp:2564 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2571 src/libslic3r/PrintConfig.cpp:2572 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2578 src/libslic3r/PrintConfig.cpp:2579 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2585 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2586 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2598 src/libslic3r/PrintConfig.cpp:2609 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:2620 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2622 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:2627 msgid "Support head front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2629 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:2636 msgid "Support head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2638 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:2645 msgid "Support head width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2647 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:2655 msgid "Support pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2657 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:2665 msgid "Max bridges on a pillar" msgstr "" #: src/libslic3r/PrintConfig.cpp:2667 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" #: src/libslic3r/PrintConfig.cpp:2675 msgid "Support pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2676 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:2684 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:2685 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:2686 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:2698 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2700 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:2709 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2711 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:2719 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2721 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:2728 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2731 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2741 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2743 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:2751 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2753 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:2760 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2762 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:2770 msgid "Object elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2772 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:2783 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:2789 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:2791 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2797 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:2799 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:2804 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2806 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2814 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2815 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:2828 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:2829 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:2839 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2841 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2861 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:2863 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2872 msgid "Pad around object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2874 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2879 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:2881 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:2886 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:2888 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:2897 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:2899 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2906 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2908 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2915 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2918 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:2925 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2927 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:2932 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2934 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:2942 msgid "Accuracy" msgstr "" #: src/libslic3r/PrintConfig.cpp:2944 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:2954 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:3342 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:3343 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:3354 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:3355 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:3360 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3361 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3365 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3366 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3370 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:3371 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:3376 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:3381 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:3382 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:3387 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:3388 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:3393 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3394 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3398 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3399 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3403 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:3404 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:3408 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3409 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:3419 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:3420 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:3425 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:3446 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3447 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:3451 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:3452 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:3455 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:3456 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:3460 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:3461 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:3464 msgid "Merge" msgstr "" #: src/libslic3r/PrintConfig.cpp:3465 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:3470 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3474 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3478 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3479 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3483 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3484 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3489 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3494 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:3497 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:3498 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:3507 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:3508 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:3511 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3512 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:3515 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:3516 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3526 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:3527 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3530 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:3531 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:3537 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3538 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/PrintObject.cpp:108 msgid "Processing triangulated mesh" msgstr "" #: src/libslic3r/PrintObject.cpp:152 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:255 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:395 msgid "Generating support material" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:348 msgid "Height (mm)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:350 msgid "Width (mm)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:352 msgid "Speed (mm/s)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:354 msgid "Fan Speed (%)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:356 msgid "Volumetric flow rate (mm³/s)" msgstr ""