# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2019-08-06 09:54+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: src/slic3r/GUI/AboutDialog.cpp:39 src/slic3r/GUI/AboutDialog.cpp:289 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:125 src/slic3r/GUI/AboutDialog.cpp:254 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:127 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:197 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:229 src/slic3r/GUI/MainFrame.cpp:60 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:256 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:257 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:258 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:259 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:92 msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:93 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:406 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:95 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:99 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:117 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:113 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:408 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:417 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:65 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:72 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:76 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:391 src/slic3r/GUI/Plater.cpp:145 #: src/slic3r/GUI/Tab.cpp:2469 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:77 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:83 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:84 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:88 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:91 src/slic3r/GUI/ConfigWizard.cpp:118 #: src/slic3r/GUI/ConfigWizard.cpp:571 src/slic3r/GUI/ConfigWizard.cpp:585 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:388 #: src/slic3r/GUI/WipeTowerDialog.cpp:84 src/slic3r/GUI/wxExtensions.cpp:486 #: src/libslic3r/PrintConfig.cpp:70 src/libslic3r/PrintConfig.cpp:77 #: src/libslic3r/PrintConfig.cpp:86 src/libslic3r/PrintConfig.cpp:220 #: src/libslic3r/PrintConfig.cpp:295 src/libslic3r/PrintConfig.cpp:303 #: src/libslic3r/PrintConfig.cpp:353 src/libslic3r/PrintConfig.cpp:363 #: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:499 #: src/libslic3r/PrintConfig.cpp:517 src/libslic3r/PrintConfig.cpp:695 #: src/libslic3r/PrintConfig.cpp:1215 src/libslic3r/PrintConfig.cpp:1276 #: src/libslic3r/PrintConfig.cpp:1294 src/libslic3r/PrintConfig.cpp:1312 #: src/libslic3r/PrintConfig.cpp:1364 src/libslic3r/PrintConfig.cpp:1374 #: src/libslic3r/PrintConfig.cpp:1495 src/libslic3r/PrintConfig.cpp:1503 #: src/libslic3r/PrintConfig.cpp:1544 src/libslic3r/PrintConfig.cpp:1552 #: src/libslic3r/PrintConfig.cpp:1562 src/libslic3r/PrintConfig.cpp:1570 #: src/libslic3r/PrintConfig.cpp:1578 src/libslic3r/PrintConfig.cpp:1661 #: src/libslic3r/PrintConfig.cpp:1878 src/libslic3r/PrintConfig.cpp:1948 #: src/libslic3r/PrintConfig.cpp:1982 src/libslic3r/PrintConfig.cpp:2176 #: src/libslic3r/PrintConfig.cpp:2183 src/libslic3r/PrintConfig.cpp:2190 #: src/libslic3r/PrintConfig.cpp:2220 src/libslic3r/PrintConfig.cpp:2230 #: src/libslic3r/PrintConfig.cpp:2240 src/libslic3r/PrintConfig.cpp:2403 #: src/libslic3r/PrintConfig.cpp:2478 src/libslic3r/PrintConfig.cpp:2487 #: src/libslic3r/PrintConfig.cpp:2496 src/libslic3r/PrintConfig.cpp:2506 #: src/libslic3r/PrintConfig.cpp:2550 src/libslic3r/PrintConfig.cpp:2560 #: src/libslic3r/PrintConfig.cpp:2572 src/libslic3r/PrintConfig.cpp:2592 #: src/libslic3r/PrintConfig.cpp:2602 src/libslic3r/PrintConfig.cpp:2613 #: src/libslic3r/PrintConfig.cpp:2631 src/libslic3r/PrintConfig.cpp:2646 #: src/libslic3r/PrintConfig.cpp:2660 src/libslic3r/PrintConfig.cpp:2673 #: src/libslic3r/PrintConfig.cpp:2683 src/libslic3r/PrintConfig.cpp:2704 #: src/libslic3r/PrintConfig.cpp:2715 src/libslic3r/PrintConfig.cpp:2725 #: src/libslic3r/PrintConfig.cpp:2735 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:92 src/libslic3r/PrintConfig.cpp:692 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:93 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:97 src/slic3r/GUI/GUI_Preview.cpp:246 #: src/libslic3r/GCode/PreviewData.cpp:175 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:101 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:154 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:171 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:181 src/slic3r/GUI/BedShapeDialog.cpp:249 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:189 src/slic3r/GUI/BedShapeDialog.cpp:257 #: src/slic3r/GUI/Tab.cpp:3204 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:239 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:464 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:471 src/slic3r/GUI/BedShapeDialog.cpp:520 #: src/slic3r/GUI/BedShapeDialog.cpp:543 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:482 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:490 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:494 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:509 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:532 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:59 src/slic3r/GUI/ConfigWizard.cpp:530 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:218 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:225 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:16 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:53 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:39 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45 msgid "slic3r version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1307 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:47 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:48 src/slic3r/GUI/Preset.cpp:1311 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 src/slic3r/GUI/Tab.cpp:939 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 msgid "min slic3r version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 msgid "max slic3r version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:70 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:73 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:99 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:118 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:122 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:188 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:189 src/slic3r/GUI/Tab.cpp:3254 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:190 src/slic3r/GUI/Plater.cpp:470 #: src/libslic3r/GCode/PreviewData.cpp:162 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:296 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:298 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:300 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:304 src/slic3r/GUI/GUI_App.cpp:747 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:306 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:311 msgid "" "Remove user profiles - install from scratch (a snapshot will be taken " "beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:342 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:379 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:379 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:381 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:383 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:407 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:407 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:415 src/slic3r/GUI/Preferences.cpp:69 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:419 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:425 src/slic3r/GUI/Preferences.cpp:77 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:429 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:432 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:437 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:444 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:446 #, possible-c-format msgid "Pick another vendor supported by %s:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:492 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:492 src/slic3r/GUI/Tab.cpp:2100 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:496 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:530 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:533 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:553 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:553 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:567 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:570 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:580 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:581 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:584 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:618 msgid "Extruder and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:618 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:634 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:635 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:638 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:639 src/slic3r/GUI/ConfigWizard.cpp:653 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:648 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:649 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:652 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1115 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1118 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1119 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1120 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1121 src/slic3r/GUI/FirmwareDialog.cpp:151 #: src/slic3r/GUI/ProgressStatusBar.cpp:27 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1135 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1138 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1207 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1208 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1210 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1211 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/Field.cpp:125 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:128 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:139 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:158 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:174 src/slic3r/GUI/Field.cpp:197 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/Field.cpp:179 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:206 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:209 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:150 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:199 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:282 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:332 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:436 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:548 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:645 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:647 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:777 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:802 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:805 src/slic3r/GUI/Tab.cpp:1824 #: src/slic3r/GUI/Tab.cpp:1880 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:807 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:809 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:810 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:841 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:852 #: src/slic3r/GUI/PrintHostDialogs.cpp:161 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:903 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:904 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:907 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:526 msgid "Layers heights" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:623 msgid "An object outside the print area was detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:624 msgid "A toolpath outside the print area was detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:625 msgid "SLA supports outside the print area were detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:626 msgid "Some objects are not visible when editing supports" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:628 msgid "" "An object outside the print area was detected\n" "Resolve the current problem to continue slicing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1711 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2872 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3389 src/slic3r/GUI/GLCanvas3D.cpp:3609 #: src/slic3r/GUI/MainFrame.cpp:559 msgid "Undo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3389 src/slic3r/GUI/GLCanvas3D.cpp:3639 #: src/slic3r/GUI/MainFrame.cpp:562 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3395 #, possible-c-format msgid "%s Stack" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3413 #, possible-c-format msgid "%s %d Action" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3460 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3468 src/slic3r/GUI/GUI_ObjectList.cpp:1434 #: src/slic3r/GUI/Plater.cpp:3467 src/slic3r/GUI/Plater.cpp:3486 #: src/slic3r/GUI/Tab.cpp:3204 msgid "Delete" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3477 src/slic3r/GUI/Plater.cpp:4075 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3486 src/slic3r/GUI/KBShortcutsDialog.cpp:134 #: src/slic3r/GUI/Plater.cpp:2636 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3486 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3498 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3507 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3519 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3530 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3543 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3553 src/slic3r/GUI/GUI_ObjectList.cpp:1280 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3566 msgid "Layers editing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5623 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5642 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:40 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:144 src/libslic3r/PrintConfig.cpp:3176 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:149 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:150 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:151 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:154 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:45 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:48 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177 msgid "Position (mm)" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177 msgid "Displacement (mm)" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:449 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:466 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:485 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:503 #: src/libslic3r/PrintConfig.cpp:3225 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:482 msgid "Rotation (deg)" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:47 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:390 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:504 #: src/libslic3r/PrintConfig.cpp:3240 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:292 msgid "Scale (%)" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1427 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1430 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1431 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51 #: src/libslic3r/PrintConfig.cpp:2620 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1433 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:531 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:720 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:925 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:991 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1099 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1138 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1139 msgid "Save changes?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1183 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1282 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1333 msgid "" "Autogeneration will erase all manually edited points.\n" "\n" "Are you sure you want to do it?\n" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1335 src/slic3r/GUI/GUI.cpp:289 #: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328 msgid "Warning" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1338 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1390 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1401 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1419 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1422 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1423 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1419 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1420 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1420 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1421 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1424 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1425 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1421 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1422 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1423 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1424 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1425 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1426 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1428 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1428 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1429 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1432 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/GUI.cpp:141 src/slic3r/GUI/Tab.cpp:3063 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI.cpp:142 msgid "Please check and fix your object list." msgstr "" #: src/slic3r/GUI/GUI.cpp:143 src/slic3r/GUI/Plater.cpp:2213 #: src/slic3r/GUI/Tab.cpp:3065 msgid "Attention!" msgstr "" #: src/slic3r/GUI/GUI.cpp:283 msgid "Notice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:435 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:443 src/slic3r/GUI/GUI_App.cpp:452 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:456 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:464 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:544 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:556 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:598 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:599 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:750 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:750 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:751 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:751 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:754 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:760 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:763 src/slic3r/GUI/wxExtensions.cpp:2882 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:763 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:764 src/slic3r/GUI/GUI_ObjectList.cpp:93 #: src/slic3r/GUI/GUI_ObjectList.cpp:567 src/slic3r/GUI/Tab.cpp:1037 #: src/slic3r/GUI/Tab.cpp:1052 src/slic3r/GUI/Tab.cpp:1150 #: src/slic3r/GUI/Tab.cpp:1153 src/slic3r/GUI/Tab.cpp:1649 #: src/slic3r/GUI/Tab.cpp:2120 src/slic3r/GUI/Tab.cpp:3699 #: src/slic3r/GUI/wxExtensions.cpp:2883 src/libslic3r/PrintConfig.cpp:83 #: src/libslic3r/PrintConfig.cpp:197 src/libslic3r/PrintConfig.cpp:360 #: src/libslic3r/PrintConfig.cpp:1013 src/libslic3r/PrintConfig.cpp:2226 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:764 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:765 src/slic3r/GUI/wxExtensions.cpp:2884 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:765 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:770 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:770 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:772 msgid "Change Application &Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:774 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:774 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:786 msgid "Taking configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:786 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:829 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:831 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:832 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:855 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:877 msgid "The presets on the following tabs were modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:877 src/slic3r/GUI/Tab.cpp:3051 msgid "Discard changes and continue anyway?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:880 msgid "Unsaved Presets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:84 #: src/slic3r/GUI/GUI_ObjectList.cpp:558 src/libslic3r/PrintConfig.cpp:67 #: src/libslic3r/PrintConfig.cpp:160 src/libslic3r/PrintConfig.cpp:392 #: src/libslic3r/PrintConfig.cpp:453 src/libslic3r/PrintConfig.cpp:461 #: src/libslic3r/PrintConfig.cpp:867 src/libslic3r/PrintConfig.cpp:1051 #: src/libslic3r/PrintConfig.cpp:1354 src/libslic3r/PrintConfig.cpp:1420 #: src/libslic3r/PrintConfig.cpp:1601 src/libslic3r/PrintConfig.cpp:2037 #: src/libslic3r/PrintConfig.cpp:2095 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:31 src/slic3r/GUI/GUI_ObjectList.cpp:85 #: src/slic3r/GUI/GUI_ObjectList.cpp:559 src/slic3r/GUI/Plater.cpp:498 #: src/slic3r/GUI/Tab.cpp:1041 src/slic3r/GUI/Tab.cpp:1042 #: src/slic3r/GUI/Tab.cpp:1394 src/libslic3r/PrintConfig.cpp:177 #: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:420 #: src/libslic3r/PrintConfig.cpp:754 src/libslic3r/PrintConfig.cpp:768 #: src/libslic3r/PrintConfig.cpp:805 src/libslic3r/PrintConfig.cpp:958 #: src/libslic3r/PrintConfig.cpp:968 src/libslic3r/PrintConfig.cpp:986 #: src/libslic3r/PrintConfig.cpp:1004 src/libslic3r/PrintConfig.cpp:1023 #: src/libslic3r/PrintConfig.cpp:1708 src/libslic3r/PrintConfig.cpp:1725 msgid "Infill" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:32 src/slic3r/GUI/GUI_ObjectList.cpp:86 #: src/slic3r/GUI/GUI_ObjectList.cpp:560 src/slic3r/GUI/GUI_Preview.cpp:243 #: src/slic3r/GUI/Tab.cpp:1070 src/slic3r/GUI/Tab.cpp:1071 #: src/libslic3r/PrintConfig.cpp:344 src/libslic3r/PrintConfig.cpp:1481 #: src/libslic3r/PrintConfig.cpp:1830 src/libslic3r/PrintConfig.cpp:1836 #: src/libslic3r/PrintConfig.cpp:1844 src/libslic3r/PrintConfig.cpp:1856 #: src/libslic3r/PrintConfig.cpp:1866 src/libslic3r/PrintConfig.cpp:1874 #: src/libslic3r/PrintConfig.cpp:1889 src/libslic3r/PrintConfig.cpp:1910 #: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1937 #: src/libslic3r/PrintConfig.cpp:1946 src/libslic3r/PrintConfig.cpp:1955 #: src/libslic3r/PrintConfig.cpp:1966 src/libslic3r/PrintConfig.cpp:1980 #: src/libslic3r/PrintConfig.cpp:1988 src/libslic3r/PrintConfig.cpp:1989 #: src/libslic3r/PrintConfig.cpp:1998 src/libslic3r/PrintConfig.cpp:2006 #: src/libslic3r/PrintConfig.cpp:2020 src/libslic3r/GCode/PreviewData.cpp:172 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:90 #: src/slic3r/GUI/GUI_ObjectList.cpp:564 src/libslic3r/PrintConfig.cpp:2202 #: src/libslic3r/PrintConfig.cpp:2210 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:41 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:47 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:48 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:49 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:50 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:87 src/slic3r/GUI/GUI_ObjectList.cpp:561 #: src/slic3r/GUI/GUI_Preview.cpp:222 src/slic3r/GUI/Tab.cpp:1095 #: src/libslic3r/PrintConfig.cpp:209 src/libslic3r/PrintConfig.cpp:441 #: src/libslic3r/PrintConfig.cpp:896 src/libslic3r/PrintConfig.cpp:1024 #: src/libslic3r/PrintConfig.cpp:1410 src/libslic3r/PrintConfig.cpp:1647 #: src/libslic3r/PrintConfig.cpp:1696 src/libslic3r/PrintConfig.cpp:1747 #: src/libslic3r/PrintConfig.cpp:2080 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:88 src/slic3r/GUI/GUI_ObjectList.cpp:562 #: src/slic3r/GUI/Tab.cpp:1130 src/slic3r/GUI/Tab.cpp:1997 #: src/libslic3r/PrintConfig.cpp:471 src/libslic3r/PrintConfig.cpp:979 #: src/libslic3r/PrintConfig.cpp:1389 src/libslic3r/PrintConfig.cpp:1717 #: src/libslic3r/PrintConfig.cpp:1902 src/libslic3r/PrintConfig.cpp:1928 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:89 src/slic3r/GUI/GUI_ObjectList.cpp:563 #: src/libslic3r/PrintConfig.cpp:431 src/libslic3r/PrintConfig.cpp:538 #: src/libslic3r/PrintConfig.cpp:855 src/libslic3r/PrintConfig.cpp:987 #: src/libslic3r/PrintConfig.cpp:1398 src/libslic3r/PrintConfig.cpp:1737 #: src/libslic3r/PrintConfig.cpp:1911 src/libslic3r/PrintConfig.cpp:2069 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:95 src/slic3r/GUI/GUI_ObjectList.cpp:569 #: src/slic3r/GUI/Plater.cpp:466 src/slic3r/GUI/Tab.cpp:3655 #: src/slic3r/GUI/Tab.cpp:3656 src/libslic3r/PrintConfig.cpp:2469 #: src/libslic3r/PrintConfig.cpp:2476 src/libslic3r/PrintConfig.cpp:2485 #: src/libslic3r/PrintConfig.cpp:2494 src/libslic3r/PrintConfig.cpp:2504 #: src/libslic3r/PrintConfig.cpp:2530 src/libslic3r/PrintConfig.cpp:2537 #: src/libslic3r/PrintConfig.cpp:2548 src/libslic3r/PrintConfig.cpp:2558 #: src/libslic3r/PrintConfig.cpp:2567 src/libslic3r/PrintConfig.cpp:2580 #: src/libslic3r/PrintConfig.cpp:2590 src/libslic3r/PrintConfig.cpp:2599 #: src/libslic3r/PrintConfig.cpp:2609 src/libslic3r/PrintConfig.cpp:2621 #: src/libslic3r/PrintConfig.cpp:2629 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:570 #: src/slic3r/GUI/Tab.cpp:3684 src/slic3r/GUI/Tab.cpp:3685 #: src/libslic3r/PrintConfig.cpp:2637 src/libslic3r/PrintConfig.cpp:2644 #: src/libslic3r/PrintConfig.cpp:2658 src/libslic3r/PrintConfig.cpp:2668 #: src/libslic3r/PrintConfig.cpp:2681 src/libslic3r/PrintConfig.cpp:2690 #: src/libslic3r/PrintConfig.cpp:2701 src/libslic3r/PrintConfig.cpp:2712 #: src/libslic3r/PrintConfig.cpp:2722 src/libslic3r/PrintConfig.cpp:2732 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:217 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:271 #, possible-c-format msgid "Auto-repaired (%d errors):\n" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:278 msgid "degenerate facets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:279 msgid "edges fixed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:280 msgid "facets removed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:281 msgid "facets added" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:282 msgid "facets reversed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:283 msgid "backwards edges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:291 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:325 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:375 src/slic3r/GUI/GUI_ObjectList.cpp:396 #: src/slic3r/GUI/GUI_ObjectList.cpp:408 src/slic3r/GUI/GUI_ObjectList.cpp:3508 #: src/slic3r/GUI/GUI_ObjectList.cpp:3518 #: src/slic3r/GUI/GUI_ObjectList.cpp:3550 src/slic3r/GUI/wxExtensions.cpp:576 #: src/slic3r/GUI/wxExtensions.cpp:633 src/slic3r/GUI/wxExtensions.cpp:658 #: src/slic3r/GUI/wxExtensions.cpp:794 msgid "default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:380 src/slic3r/GUI/Tab.cpp:1613 #: src/libslic3r/PrintConfig.cpp:470 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:493 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:493 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:934 src/slic3r/GUI/GUI_ObjectList.cpp:3346 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:952 msgid "Remove Volume(s)" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1007 #: src/slic3r/GUI/GUI_ObjectList.cpp:1316 #: src/slic3r/GUI/GUI_ObjectList.cpp:1322 #: src/slic3r/GUI/GUI_ObjectList.cpp:1556 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1077 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1126 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1127 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1128 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1189 msgid "Add Settings Bundle for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1190 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1191 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1230 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1235 #: src/slic3r/GUI/GUI_ObjectList.cpp:1260 #: src/slic3r/GUI/GUI_ObjectList.cpp:1263 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1235 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1235 msgid "Sphere" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1235 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1287 msgid "Edit Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1295 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1362 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1369 #: src/slic3r/GUI/GUI_ObjectList.cpp:1510 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1375 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1386 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1396 src/slic3r/GUI/Plater.cpp:3496 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1403 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1422 src/libslic3r/PrintConfig.cpp:309 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1428 msgid "Select new extruder for the object/part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1440 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1440 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1510 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1585 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1617 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1662 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1669 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1770 #: src/slic3r/GUI/GUI_ObjectList.cpp:1872 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1782 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1806 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1822 msgid "Delete Layers Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1853 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1857 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1876 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1900 src/slic3r/GUI/Plater.cpp:2793 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1904 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1950 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2075 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2087 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2100 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2104 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2109 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2115 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2121 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2128 msgid "Layers Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2128 msgid "Layer Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2303 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2415 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2484 #: src/slic3r/GUI/GUI_ObjectList.cpp:2513 #: src/slic3r/GUI/GUI_ObjectList.cpp:2531 msgid "Add New Layers Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2590 msgid "Edit Layers Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2867 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2875 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2993 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2994 #: src/slic3r/GUI/GUI_ObjectList.cpp:3127 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2994 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2996 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2997 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2998 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3001 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3006 #: src/slic3r/GUI/GUI_ObjectList.cpp:3081 src/slic3r/GUI/Plater.cpp:126 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3122 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3127 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3127 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3127 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3129 msgid "Type:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3129 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3134 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3368 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3368 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3384 #: src/slic3r/GUI/GUI_ObjectList.cpp:3480 src/slic3r/GUI/Tab.cpp:3536 #: src/slic3r/GUI/Tab.cpp:3540 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3385 #: src/slic3r/GUI/GUI_ObjectList.cpp:3481 src/slic3r/GUI/Tab.cpp:3537 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3498 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3499 msgid "Select extruder number for selected objects and/or parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3512 msgid "Select extruder number:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3513 msgid "This extruder will be set for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:105 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:106 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:82 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:125 msgid "Object Manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:176 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:212 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:245 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:285 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:290 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:303 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:328 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:340 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:355 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:388 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:443 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:389 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:444 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:445 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:502 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:554 msgid "" "You cann't use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:715 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:746 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:811 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:895 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:898 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:58 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:94 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:100 #, possible-c-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:144 #, possible-c-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:216 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:219 src/slic3r/GUI/GUI_Preview.cpp:554 #: src/libslic3r/GCode/PreviewData.cpp:394 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:220 src/libslic3r/PrintConfig.cpp:483 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:221 src/libslic3r/PrintConfig.cpp:2188 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:223 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/GUI_Preview.cpp:328 #: src/slic3r/GUI/GUI_Preview.cpp:506 src/slic3r/GUI/GUI_Preview.cpp:553 #: src/slic3r/GUI/GUI_Preview.cpp:749 src/libslic3r/GCode/PreviewData.cpp:404 msgid "Tool" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:225 src/slic3r/GUI/GUI_Preview.cpp:551 #: src/libslic3r/GCode/PreviewData.cpp:406 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:228 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:231 src/slic3r/GUI/GUI_Preview.cpp:232 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/GCode/PreviewData.cpp:163 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:235 src/libslic3r/GCode/PreviewData.cpp:164 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:236 src/libslic3r/GCode/PreviewData.cpp:165 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/GCode/PreviewData.cpp:166 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/PrintConfig.cpp:1736 #: src/libslic3r/PrintConfig.cpp:1746 src/libslic3r/GCode/PreviewData.cpp:167 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/PrintConfig.cpp:2068 #: src/libslic3r/PrintConfig.cpp:2079 src/libslic3r/GCode/PreviewData.cpp:168 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/GCode/PreviewData.cpp:169 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/PrintConfig.cpp:895 #: src/libslic3r/GCode/PreviewData.cpp:170 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:242 src/slic3r/GUI/Tab.cpp:1061 #: src/libslic3r/GCode/PreviewData.cpp:171 msgid "Skirt" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/PrintConfig.cpp:1954 #: src/libslic3r/GCode/PreviewData.cpp:173 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:245 src/slic3r/GUI/Tab.cpp:1141 #: src/libslic3r/GCode/PreviewData.cpp:174 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:250 src/libslic3r/PrintConfig.cpp:2102 msgid "Travel" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:251 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:252 msgid "Unretractions" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:253 msgid "Shells" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:13 src/slic3r/GUI/MainFrame.cpp:672 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:104 msgid "Open project STL/OBJ/AMF/3MF with config, delete bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:105 msgid "Import STL/OBJ/AMF/3MF without config, keep bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:106 msgid "Load Config from .ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:107 src/slic3r/GUI/Plater.cpp:822 #: src/slic3r/GUI/Plater.cpp:4687 src/libslic3r/PrintConfig.cpp:3127 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:108 msgid "Save project (3MF)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "Load Config from .ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:110 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:116 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:117 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:119 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:120 src/slic3r/GUI/Preferences.cpp:10 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:121 #: src/slic3r/GUI/PrintHostDialogs.cpp:136 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:124 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:125 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Press to select multiple object or move multiple object with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:128 msgid "Main Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Select All objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Delete All" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 #, possible-c-format msgid "" "Press to activate selection rectangle\n" "or to snap by 5% in Gizmo scale\n" "or to snap by 1mm in Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 msgid "" "Press to scale selection to fit print volume\n" "in Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "" "Press to activate deselection rectangle\n" "or to scale or rotate selected objects\n" "around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 msgid "Press to activate one direction scaling in Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:150 msgid "Change camera type" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Zoom to all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Zoom to selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Unselect gizmo / Clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Toggle picking pass texture rendering on/off" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "Plater Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:176 #: src/slic3r/GUI/KBShortcutsDialog.cpp:187 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:176 #: src/slic3r/GUI/KBShortcutsDialog.cpp:178 msgid "Upper Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:177 #: src/slic3r/GUI/KBShortcutsDialog.cpp:188 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:177 #: src/slic3r/GUI/KBShortcutsDialog.cpp:179 msgid "Lower Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:181 msgid "Preview Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:187 msgid "Move current slider thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:188 msgid "Move current slider thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:189 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:189 msgid "Set upper thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:190 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:190 msgid "Set lower thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:191 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:192 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:194 msgid "Layers Slider Shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:62 msgid "" " - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/" "releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:157 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:187 msgid "Plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:393 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:393 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:396 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:396 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:401 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:410 msgid "The selected project is no more available" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:410 src/slic3r/GUI/MainFrame.cpp:747 #: src/slic3r/GUI/PrintHostDialogs.cpp:231 msgid "Error" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:434 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:434 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:438 src/slic3r/GUI/MainFrame.cpp:440 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:438 src/slic3r/GUI/MainFrame.cpp:440 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:448 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:448 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:452 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:452 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:454 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:454 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:457 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:457 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:459 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:462 src/slic3r/GUI/MainFrame.cpp:708 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:462 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:466 src/slic3r/GUI/MainFrame.cpp:709 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:466 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:471 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:471 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:474 msgid "Export plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:474 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:477 msgid "Export plate as &AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:477 msgid "Export current plate as AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:481 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:481 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:483 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:483 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:485 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:491 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:491 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:497 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:497 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:503 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:503 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:511 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:511 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:515 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:515 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:518 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:518 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:543 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:544 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:546 msgid "D&eselect all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:547 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:550 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:551 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:553 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:554 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:558 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:561 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:566 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:567 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:569 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:570 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:579 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:579 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:586 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:586 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:588 src/slic3r/GUI/MainFrame.cpp:711 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:588 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:591 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:591 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:595 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:595 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:598 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:598 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:617 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:617 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:626 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:626 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:630 src/libslic3r/PrintConfig.cpp:2094 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:630 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #: src/slic3r/GUI/MainFrame.cpp:633 src/libslic3r/PrintConfig.cpp:159 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:633 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:635 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:635 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:637 src/libslic3r/PrintConfig.cpp:1611 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:637 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:639 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:639 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:641 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:641 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:648 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:648 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:650 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:650 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:656 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:657 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:663 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:663 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:665 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:665 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:667 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:667 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:669 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:669 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:672 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:680 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:681 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:682 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:683 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:686 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:708 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:709 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:711 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:732 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:746 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:752 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:752 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:753 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:788 #, possible-c-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:788 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:788 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:803 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:815 src/slic3r/GUI/Plater.cpp:2933 #: src/slic3r/GUI/Plater.cpp:4418 src/slic3r/GUI/Tab.cpp:1170 #: src/slic3r/GUI/Tab.cpp:3700 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:817 #, possible-c-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:840 msgid " was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:842 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:857 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:870 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:885 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:885 src/libslic3r/PrintConfig.cpp:3221 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:899 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:919 src/slic3r/GUI/MainFrame.cpp:983 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:956 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1007 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:73 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:74 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/Plater.cpp:146 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:147 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:148 msgid "Materials" msgstr "" #: src/slic3r/GUI/Plater.cpp:151 msgid "Manifold" msgstr "" #: src/slic3r/GUI/Plater.cpp:201 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:220 src/slic3r/GUI/Plater.cpp:1135 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:221 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:222 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:223 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:224 src/slic3r/GUI/Plater.cpp:1150 #: src/libslic3r/PrintConfig.cpp:742 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:225 src/slic3r/GUI/Plater.cpp:1122 #: src/slic3r/GUI/Plater.cpp:1164 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/Plater.cpp:226 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:317 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/Plater.cpp:469 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:471 src/libslic3r/PrintConfig.cpp:1865 #: src/libslic3r/PrintConfig.cpp:2529 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:472 src/slic3r/GUI/Plater.cpp:587 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:473 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:505 src/slic3r/GUI/Tab.cpp:1067 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:507 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:515 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:766 msgid "Print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:767 src/slic3r/GUI/Tab.cpp:1604 #: src/slic3r/GUI/Tab.cpp:1605 msgid "Filament" msgstr "" #: src/slic3r/GUI/Plater.cpp:768 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:769 src/slic3r/GUI/Preset.cpp:1310 msgid "SLA material" msgstr "" #: src/slic3r/GUI/Plater.cpp:770 msgid "Printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:820 src/slic3r/GUI/Plater.cpp:4688 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:823 src/slic3r/GUI/Plater.cpp:2933 #: src/slic3r/GUI/Plater.cpp:4421 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:963 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1068 #, possible-c-format msgid "%d (%d shells)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1073 #, possible-c-format msgid "Auto-repaired (%d errors)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1076 #, possible-c-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" #: src/slic3r/GUI/Plater.cpp:1086 msgid "Yes" msgstr "" #: src/slic3r/GUI/Plater.cpp:1109 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1112 msgid "object(s)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1112 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1137 src/slic3r/GUI/Plater.cpp:1152 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1137 src/slic3r/GUI/Plater.cpp:1152 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1167 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1171 src/slic3r/GUI/Plater.cpp:1180 msgid "Color " msgstr "" #: src/slic3r/GUI/Plater.cpp:1176 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1271 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:1275 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:1503 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/Plater.cpp:2056 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2173 msgid "Loading" msgstr "" #: src/slic3r/GUI/Plater.cpp:2183 #, possible-c-format msgid "Processing input file %s\n" msgstr "" #: src/slic3r/GUI/Plater.cpp:2211 msgid "" "You can't to load SLA project if there is at least one multi-part object on " "the bed" msgstr "" #: src/slic3r/GUI/Plater.cpp:2212 src/slic3r/GUI/Tab.cpp:3064 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/Plater.cpp:2255 msgid "" "This file contains several objects positioned at multiple heights. Instead " "of considering them as multiple objects, should I consider\n" "this file as a single object having multiple parts?\n" msgstr "" #: src/slic3r/GUI/Plater.cpp:2258 src/slic3r/GUI/Plater.cpp:2310 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2265 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?\n" msgstr "" #: src/slic3r/GUI/Plater.cpp:2266 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2287 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2307 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?\n" msgstr "" #: src/slic3r/GUI/Plater.cpp:2323 msgid "Loaded" msgstr "" #: src/slic3r/GUI/Plater.cpp:2418 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2419 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2476 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2483 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2489 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2592 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2603 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2630 src/slic3r/GUI/Plater.cpp:3517 msgid "Mirror" msgstr "" #: src/slic3r/GUI/Plater.cpp:2643 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:2689 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Plater.cpp:2712 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Plater.cpp:2718 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Plater.cpp:2719 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Plater.cpp:2735 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:2768 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Plater.cpp:2769 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Plater.cpp:2785 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "" #: src/slic3r/GUI/Plater.cpp:2796 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:2918 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2927 msgid "Ready to slice" msgstr "" #: src/slic3r/GUI/Plater.cpp:2965 src/slic3r/GUI/PrintHostDialogs.cpp:232 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/Plater.cpp:2982 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3036 src/slic3r/GUI/Plater.cpp:3493 msgid "Reload from Disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3072 msgid "Fix Throught NetFabb" msgstr "" #: src/slic3r/GUI/Plater.cpp:3254 msgid "Export failed" msgstr "" #: src/slic3r/GUI/Plater.cpp:3259 src/slic3r/GUI/PrintHostDialogs.cpp:233 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/Plater.cpp:3347 src/slic3r/GUI/Plater.cpp:3359 #: src/slic3r/GUI/Plater.cpp:3473 msgid "Increase copies" msgstr "" #: src/slic3r/GUI/Plater.cpp:3467 src/slic3r/GUI/Plater.cpp:3486 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3473 msgid "Place one more copy of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3475 msgid "Decrease copies" msgstr "" #: src/slic3r/GUI/Plater.cpp:3475 msgid "Remove one copy of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3477 msgid "Set number of copies" msgstr "" #: src/slic3r/GUI/Plater.cpp:3477 msgid "Change the number of copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3493 msgid "Reload the selected file from Disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3496 msgid "Export the selected object as STL file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3510 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3510 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3512 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3512 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3514 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3514 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3517 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3529 msgid "To objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3529 src/slic3r/GUI/Plater.cpp:3549 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3531 msgid "To parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:3531 src/slic3r/GUI/Plater.cpp:3563 msgid "Split the selected object into individual sub-parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:3534 src/slic3r/GUI/Plater.cpp:3549 #: src/slic3r/GUI/Plater.cpp:3563 src/libslic3r/PrintConfig.cpp:3245 msgid "Split" msgstr "" #: src/slic3r/GUI/Plater.cpp:3534 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3555 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:3555 msgid "Optimize the rotation of the object for better print results." msgstr "" #: src/slic3r/GUI/Plater.cpp:3595 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:3603 src/slic3r/GUI/Tab.cpp:2534 msgid "Preview" msgstr "" #: src/slic3r/GUI/Plater.cpp:3831 msgid "" "%1% printer was active at the time the target Undo / Redo snapshot was " "taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" #: src/slic3r/GUI/Plater.cpp:3992 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:4016 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4020 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4075 msgid "All objects will be removed, continue ?" msgstr "" #: src/slic3r/GUI/Plater.cpp:4083 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4091 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4127 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4163 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:4193 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:4225 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4225 msgid "Save SL1 file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4337 #, possible-c-format msgid "STL file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:4353 #, possible-c-format msgid "AMF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:4356 #, possible-c-format msgid "Error exporting AMF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:4382 #, possible-c-format msgid "3MF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:4387 #, possible-c-format msgid "Error exporting 3MF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:4687 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:4688 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:4772 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:22 src/slic3r/GUI/Tab.cpp:1955 #: src/slic3r/GUI/Tab.cpp:2193 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:44 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:46 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:52 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:54 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:60 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:62 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:71 msgid "" "If enabled, PrusaSlicer will check for the new versions of itself online. " "When a new version becomes available a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/Preferences.cpp:79 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:84 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:86 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:92 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:94 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:101 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:103 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:110 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:112 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:117 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:119 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:144 #, possible-c-format msgid "You need to restart %s to make the changes effective." msgstr "" #: src/slic3r/GUI/Preferences.cpp:192 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:207 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preset.cpp:212 msgid "modified" msgstr "" #: src/slic3r/GUI/Preset.cpp:963 src/slic3r/GUI/Preset.cpp:1003 #: src/slic3r/GUI/Preset.cpp:1068 src/slic3r/GUI/Preset.cpp:1100 #: src/slic3r/GUI/PresetBundle.cpp:1480 src/slic3r/GUI/PresetBundle.cpp:1545 msgid "System presets" msgstr "" #: src/slic3r/GUI/Preset.cpp:1007 src/slic3r/GUI/Preset.cpp:1104 #: src/slic3r/GUI/PresetBundle.cpp:1550 msgid "User presets" msgstr "" #: src/slic3r/GUI/Preset.cpp:1036 src/slic3r/GUI/Tab.cpp:241 msgid "Add a new printer" msgstr "" #: src/slic3r/GUI/Preset.cpp:1308 msgid "filament" msgstr "" #: src/slic3r/GUI/Preset.cpp:1309 msgid "SLA print" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:28 msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:35 msgid "" "\n" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:39 msgid "" "\n" "During the other layers, fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:41 msgid "Fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:47 msgid "will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:50 msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:52 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:54 msgid "will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:155 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:164 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:173 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:183 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:191 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:202 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:212 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:222 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:223 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:224 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:228 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:246 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:262 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:268 #, possible-c-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:35 msgid "Start printing after upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:42 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:149 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:150 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:151 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:152 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:153 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:154 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:157 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:159 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:198 #: src/slic3r/GUI/PrintHostDialogs.cpp:229 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:230 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:234 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:272 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:23 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 msgid "Time" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:82 #: src/libslic3r/PrintConfig.cpp:627 src/libslic3r/PrintConfig.cpp:671 #: src/libslic3r/PrintConfig.cpp:686 src/libslic3r/PrintConfig.cpp:2349 #: src/libslic3r/PrintConfig.cpp:2358 src/libslic3r/PrintConfig.cpp:2418 #: src/libslic3r/PrintConfig.cpp:2425 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:584 #: src/libslic3r/PrintConfig.cpp:1234 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:78 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:154 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:52 src/libslic3r/PrintConfig.cpp:239 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:53 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:58 src/libslic3r/PrintConfig.cpp:254 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:59 msgid "Select the print profiles this profile is compatible with." msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:133 #, possible-c-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:134 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:139 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:921 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:923 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:925 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:928 #, possible-c-format msgid "" "Current preset is inherited from:\n" "\t%s" msgstr "" #: src/slic3r/GUI/Tab.cpp:932 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:933 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:934 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:938 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:944 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:952 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:955 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:969 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:973 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1008 src/slic3r/GUI/Tab.cpp:3649 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1009 src/slic3r/GUI/Tab.cpp:1257 #: src/libslic3r/PrintConfig.cpp:66 msgid "Layer height" msgstr "" #: src/slic3r/GUI/Tab.cpp:1013 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1024 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1025 src/libslic3r/PrintConfig.cpp:1759 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1030 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1048 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1060 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/Tab.cpp:1077 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1081 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1096 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1108 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1111 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1114 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1121 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1129 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1137 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1154 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1164 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1167 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1176 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1179 src/slic3r/GUI/Tab.cpp:3703 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1180 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1182 msgid "Extruder clearance (mm)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1191 src/slic3r/GUI/Tab.cpp:3704 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1198 src/libslic3r/PrintConfig.cpp:1432 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1204 src/slic3r/GUI/Tab.cpp:1205 #: src/slic3r/GUI/Tab.cpp:1716 src/slic3r/GUI/Tab.cpp:1717 #: src/slic3r/GUI/Tab.cpp:2165 src/slic3r/GUI/Tab.cpp:2166 #: src/slic3r/GUI/Tab.cpp:2273 src/slic3r/GUI/Tab.cpp:2274 #: src/slic3r/GUI/Tab.cpp:3586 src/slic3r/GUI/Tab.cpp:3587 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1211 src/slic3r/GUI/Tab.cpp:1724 #: src/slic3r/GUI/Tab.cpp:2172 src/slic3r/GUI/Tab.cpp:2280 #: src/slic3r/GUI/Tab.cpp:3594 src/slic3r/GUI/Tab.cpp:3709 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1212 src/slic3r/GUI/Tab.cpp:1725 #: src/slic3r/GUI/Tab.cpp:2173 src/slic3r/GUI/Tab.cpp:2281 #: src/slic3r/GUI/Tab.cpp:3595 src/slic3r/GUI/Tab.cpp:3710 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1256 msgid "" "Zero layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/Tab.cpp:1268 msgid "" "Zero first layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/Tab.cpp:1269 src/libslic3r/PrintConfig.cpp:866 msgid "First layer height" msgstr "" #: src/slic3r/GUI/Tab.cpp:1283 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- no ensure_vertical_shell_thickness\n" "\n" "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1290 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/Tab.cpp:1311 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0).\n" "\n" "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1315 src/slic3r/GUI/Tab.cpp:1332 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/Tab.cpp:1329 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers.\n" "\n" "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1347 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters\n" "\n" "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1350 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/Tab.cpp:1392 msgid "" "The %1% infill pattern is not supposed to work at 100%% density.\n" "\n" "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1502 src/slic3r/GUI/Tab.cpp:1557 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1503 src/slic3r/GUI/Tab.cpp:1562 #: src/slic3r/GUI/Tab.cpp:2514 msgid "Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:1612 src/libslic3r/PrintConfig.cpp:2030 msgid "Temperature" msgstr "" #: src/slic3r/GUI/Tab.cpp:1618 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1623 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1624 src/libslic3r/PrintConfig.cpp:1335 #: src/libslic3r/PrintConfig.cpp:2150 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1635 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1636 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1644 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1650 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1654 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1664 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1667 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1681 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1703 src/slic3r/GUI/Tab.cpp:2128 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1704 src/slic3r/GUI/Tab.cpp:2129 #: src/libslic3r/PrintConfig.cpp:1785 src/libslic3r/PrintConfig.cpp:1800 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1710 src/slic3r/GUI/Tab.cpp:2135 #: src/libslic3r/PrintConfig.cpp:369 src/libslic3r/PrintConfig.cpp:379 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1843 src/slic3r/GUI/Tab.cpp:2068 msgid "Test" msgstr "" #: src/slic3r/GUI/Tab.cpp:1853 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/Tab.cpp:1859 src/slic3r/GUI/Tab.cpp:2081 msgid "Success!" msgstr "" #: src/slic3r/GUI/Tab.cpp:1874 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/Tab.cpp:1887 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/Tab.cpp:1888 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1916 #, possible-c-format msgid "" "HTTPS CA File:\n" " \tOn this system, %s uses HTTPS certificates from the system Certificate " "Store or Keychain.\n" " \tTo use a custom CA file, please import your CA file into Certificate " "Store / Keychain." msgstr "" #: src/slic3r/GUI/Tab.cpp:1956 src/slic3r/GUI/Tab.cpp:2194 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:1961 src/slic3r/GUI/Tab.cpp:2199 #: src/slic3r/GUI/Tab.cpp:3256 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:1993 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:1998 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:2023 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2026 src/slic3r/GUI/Tab.cpp:2484 #: src/libslic3r/PrintConfig.cpp:1310 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:2053 msgid "USB/Serial connection" msgstr "" #: src/slic3r/GUI/Tab.cpp:2054 src/libslic3r/PrintConfig.cpp:1640 msgid "Serial port" msgstr "" #: src/slic3r/GUI/Tab.cpp:2059 msgid "Rescan serial ports" msgstr "" #: src/slic3r/GUI/Tab.cpp:2081 msgid "Connection to printer works correctly." msgstr "" #: src/slic3r/GUI/Tab.cpp:2084 msgid "Connection failed." msgstr "" #: src/slic3r/GUI/Tab.cpp:2097 src/slic3r/GUI/Tab.cpp:2268 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/Tab.cpp:2141 src/libslic3r/PrintConfig.cpp:138 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2147 src/libslic3r/PrintConfig.cpp:1056 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2153 src/libslic3r/PrintConfig.cpp:2056 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2159 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2231 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2246 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2247 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2253 src/slic3r/GUI/Tab.cpp:3568 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2333 src/slic3r/GUI/Tab.cpp:2418 #: src/libslic3r/PrintConfig.cpp:1106 src/libslic3r/PrintConfig.cpp:1124 #: src/libslic3r/PrintConfig.cpp:1142 src/libslic3r/PrintConfig.cpp:1159 #: src/libslic3r/PrintConfig.cpp:1170 src/libslic3r/PrintConfig.cpp:1181 #: src/libslic3r/PrintConfig.cpp:1192 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2347 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2348 msgid "Normal" msgstr "" #: src/slic3r/GUI/Tab.cpp:2353 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2354 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Tab.cpp:2362 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2367 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2374 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2379 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2443 src/slic3r/GUI/Tab.cpp:2451 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2452 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2465 src/libslic3r/GCode/PreviewData.cpp:477 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/Tab.cpp:2483 msgid "Do you want to change the diameter for all extruders?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2506 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2511 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2517 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2530 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2693 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2695 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:3024 #, possible-c-format msgid "Default preset (%s)" msgstr "" #: src/slic3r/GUI/Tab.cpp:3025 #, possible-c-format msgid "Preset (%s)" msgstr "" #: src/slic3r/GUI/Tab.cpp:3042 msgid "has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3045 msgid "is not compatible with printer" msgstr "" #: src/slic3r/GUI/Tab.cpp:3046 msgid "is not compatible with print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:3048 msgid "and it has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3052 msgid "Unsaved Changes" msgstr "" #: src/slic3r/GUI/Tab.cpp:3143 msgid "%1% - Copy" msgstr "" #: src/slic3r/GUI/Tab.cpp:3166 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:3171 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/Tab.cpp:3175 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/Tab.cpp:3201 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3201 msgid "delete" msgstr "" #. TRN remove/delete #: src/slic3r/GUI/Tab.cpp:3203 msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3206 msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3332 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3334 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3336 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3338 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3343 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3345 msgid "" "for the left button: \tindicates a non-system (or non-default) preset,\n" "for the right button: \tindicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3348 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3350 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3360 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3362 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3365 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3368 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3370 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3376 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3377 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3383 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3384 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #. TRN Preset #: src/slic3r/GUI/Tab.cpp:3497 #, possible-c-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3541 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3545 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/Tab.cpp:3558 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:3560 src/slic3r/GUI/Tab.cpp:3651 #: src/slic3r/GUI/wxExtensions.cpp:454 msgid "Layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:3564 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:3659 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:3664 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:3675 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:3680 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:3747 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/Tab.cpp:3751 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/Tab.cpp:3767 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/Tab.cpp:3771 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/Tab.hpp:324 src/slic3r/GUI/Tab.hpp:422 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:348 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:383 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:407 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:434 msgid "Save preset" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:47 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:55 msgid "Changelog && Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:62 src/slic3r/GUI/UpdateDialogs.cpp:125 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:67 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:73 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:91 src/slic3r/GUI/UpdateDialogs.cpp:205 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:91 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:94 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:115 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:149 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:150 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:155 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s.\n" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:164 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:169 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:185 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:188 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:209 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:225 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:14 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:40 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:82 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:84 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:88 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:90 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:141 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:225 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:226 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:234 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:235 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:240 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:247 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:248 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:262 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:327 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:339 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:339 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:443 msgid "Instances" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:447 src/slic3r/GUI/wxExtensions.cpp:592 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:486 msgid "Range" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:2570 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:2571 msgid "Add/Del color change" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:2572 msgid "Discard all color changes" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:2832 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:2833 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/Duet.cpp:51 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:56 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:148 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:151 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:69 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:84 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:90 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:90 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:195 msgid "Connection to Prusa SL1 works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:200 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:614 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:619 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:621 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:219 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:235 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:242 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:248 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:251 #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:263 #: src/slic3r/Utils/FixModelByWin10.cpp:270 #: src/slic3r/Utils/FixModelByWin10.cpp:302 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:340 msgid "Model fixing" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:341 msgid "Exporting model..." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:368 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:383 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:385 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:387 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:391 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:406 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 msgid "Model repaired successfully" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model Repair by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model repair failed: \n" msgstr "" #: src/libslic3r/Zipper.cpp:32 msgid "undefined error" msgstr "" #: src/libslic3r/Zipper.cpp:34 msgid "too many files" msgstr "" #: src/libslic3r/Zipper.cpp:36 msgid "file too large" msgstr "" #: src/libslic3r/Zipper.cpp:38 msgid "unsupported method" msgstr "" #: src/libslic3r/Zipper.cpp:40 msgid "unsupported encryption" msgstr "" #: src/libslic3r/Zipper.cpp:42 msgid "unsupported feature" msgstr "" #: src/libslic3r/Zipper.cpp:44 msgid "failed finding central directory" msgstr "" #: src/libslic3r/Zipper.cpp:46 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/Zipper.cpp:48 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/Zipper.cpp:50 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/Zipper.cpp:52 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/Zipper.cpp:54 msgid "compression failed" msgstr "" #: src/libslic3r/Zipper.cpp:56 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/Zipper.cpp:58 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/Zipper.cpp:60 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/Zipper.cpp:62 msgid "allocation failed" msgstr "" #: src/libslic3r/Zipper.cpp:64 msgid "file open failed" msgstr "" #: src/libslic3r/Zipper.cpp:66 msgid "file create failed" msgstr "" #: src/libslic3r/Zipper.cpp:68 msgid "file write failed" msgstr "" #: src/libslic3r/Zipper.cpp:70 msgid "file read failed" msgstr "" #: src/libslic3r/Zipper.cpp:72 msgid "file close failed" msgstr "" #: src/libslic3r/Zipper.cpp:74 msgid "file seek failed" msgstr "" #: src/libslic3r/Zipper.cpp:76 msgid "file stat failed" msgstr "" #: src/libslic3r/Zipper.cpp:78 msgid "invalid parameter" msgstr "" #: src/libslic3r/Zipper.cpp:80 msgid "invalid filename" msgstr "" #: src/libslic3r/Zipper.cpp:82 msgid "buffer too small" msgstr "" #: src/libslic3r/Zipper.cpp:84 msgid "internal error" msgstr "" #: src/libslic3r/Zipper.cpp:86 msgid "file not found" msgstr "" #: src/libslic3r/Zipper.cpp:88 msgid "archive is too large" msgstr "" #: src/libslic3r/Zipper.cpp:90 msgid "validation failed" msgstr "" #: src/libslic3r/Zipper.cpp:92 msgid "write calledback failed" msgstr "" #: src/libslic3r/Zipper.cpp:102 msgid "Error with zip archive" msgstr "" #: src/libslic3r/Print.cpp:1093 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:1120 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:1135 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:1145 msgid "The Spiral Vase option can only be used when printing a single object." msgstr "" #: src/libslic3r/Print.cpp:1147 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:1155 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:1159 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " "and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:1161 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:1165 msgid "All extruders must have the same diameter for the Wipe Tower." msgstr "" #: src/libslic3r/Print.cpp:1186 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:1188 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:1190 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:1192 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:1220 msgid "" "The Wipe tower is only supported if all objects have the same layer height " "profile" msgstr "" #: src/libslic3r/Print.cpp:1230 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:1247 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:1256 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:1264 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:1268 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:1290 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1294 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1438 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:1446 msgid "Generating skirt" msgstr "" #: src/libslic3r/Print.cpp:1454 msgid "Generating brim" msgstr "" #: src/libslic3r/Print.cpp:1482 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:1486 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLAPrint.cpp:58 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrint.cpp:59 src/libslic3r/SLAPrint.cpp:871 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrint.cpp:60 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrint.cpp:61 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrint.cpp:62 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrint.cpp:79 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrint.cpp:80 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrint.cpp:650 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:664 msgid "Elevation is too low for object." msgstr "" #: src/libslic3r/SLAPrint.cpp:670 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:759 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrint.cpp:954 src/libslic3r/SLAPrint.cpp:964 #: src/libslic3r/SLAPrint.cpp:1005 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrint.cpp:1537 msgid "Slicing done" msgstr "" #: src/libslic3r/PrintBase.cpp:71 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:51 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:56 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:61 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:68 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:75 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:76 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:82 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:84 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:92 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:93 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance." msgstr "" #: src/libslic3r/PrintConfig.cpp:99 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:100 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:106 msgid "HTTPS CA File" msgstr "" #: src/libslic3r/PrintConfig.cpp:107 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:121 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:122 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:129 src/libslic3r/PrintConfig.cpp:2027 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:130 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:132 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:139 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:149 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:150 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:161 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:162 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:167 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:168 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:170 src/libslic3r/PrintConfig.cpp:313 #: src/libslic3r/PrintConfig.cpp:840 src/libslic3r/PrintConfig.cpp:961 #: src/libslic3r/PrintConfig.cpp:1130 src/libslic3r/PrintConfig.cpp:1183 #: src/libslic3r/PrintConfig.cpp:1194 src/libslic3r/PrintConfig.cpp:1383 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:176 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:178 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:181 src/libslic3r/PrintConfig.cpp:758 #: src/libslic3r/PrintConfig.cpp:1619 src/libslic3r/PrintConfig.cpp:1629 #: src/libslic3r/PrintConfig.cpp:1858 src/libslic3r/PrintConfig.cpp:2012 #: src/libslic3r/PrintConfig.cpp:2197 src/libslic3r/PrintConfig.cpp:2582 #: src/libslic3r/PrintConfig.cpp:2693 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:187 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:188 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:189 src/libslic3r/PrintConfig.cpp:770 #: src/libslic3r/PrintConfig.cpp:1203 src/libslic3r/PrintConfig.cpp:1266 #: src/libslic3r/PrintConfig.cpp:1511 src/libslic3r/PrintConfig.cpp:2366 #: src/libslic3r/PrintConfig.cpp:2623 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:196 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:198 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:208 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:210 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:211 src/libslic3r/PrintConfig.cpp:592 #: src/libslic3r/PrintConfig.cpp:600 src/libslic3r/PrintConfig.cpp:609 #: src/libslic3r/PrintConfig.cpp:617 src/libslic3r/PrintConfig.cpp:644 #: src/libslic3r/PrintConfig.cpp:663 src/libslic3r/PrintConfig.cpp:899 #: src/libslic3r/PrintConfig.cpp:1026 src/libslic3r/PrintConfig.cpp:1112 #: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:1161 #: src/libslic3r/PrintConfig.cpp:1172 src/libslic3r/PrintConfig.cpp:1225 #: src/libslic3r/PrintConfig.cpp:1284 src/libslic3r/PrintConfig.cpp:1412 #: src/libslic3r/PrintConfig.cpp:1586 src/libslic3r/PrintConfig.cpp:1595 #: src/libslic3r/PrintConfig.cpp:1991 src/libslic3r/PrintConfig.cpp:2104 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:218 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:219 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:226 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:227 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:234 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:235 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:245 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:246 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:260 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:261 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:278 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:279 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:287 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:288 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:293 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:294 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:301 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:302 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:310 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:319 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:320 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:326 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:327 src/libslic3r/PrintConfig.cpp:2447 #: src/libslic3r/PrintConfig.cpp:2458 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:333 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:334 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:336 src/libslic3r/PrintConfig.cpp:971 #: src/libslic3r/PrintConfig.cpp:1484 src/libslic3r/PrintConfig.cpp:1669 #: src/libslic3r/PrintConfig.cpp:1730 src/libslic3r/PrintConfig.cpp:1894 #: src/libslic3r/PrintConfig.cpp:1939 msgid "layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:343 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:345 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:351 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:352 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:359 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:361 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:370 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all Slic3r settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:380 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "Slic3r settings. If you have multiple extruders, the gcode is processed in " "extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:391 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:393 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:399 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:401 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:409 src/libslic3r/PrintConfig.cpp:821 #: src/libslic3r/PrintConfig.cpp:1972 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:410 src/libslic3r/PrintConfig.cpp:827 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:411 src/libslic3r/PrintConfig.cpp:831 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:412 src/libslic3r/PrintConfig.cpp:832 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:413 src/libslic3r/PrintConfig.cpp:833 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:419 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:421 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:430 src/libslic3r/PrintConfig.cpp:440 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:432 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:435 src/libslic3r/PrintConfig.cpp:543 #: src/libslic3r/PrintConfig.cpp:860 src/libslic3r/PrintConfig.cpp:872 #: src/libslic3r/PrintConfig.cpp:992 src/libslic3r/PrintConfig.cpp:1017 #: src/libslic3r/PrintConfig.cpp:1403 src/libslic3r/PrintConfig.cpp:1741 #: src/libslic3r/PrintConfig.cpp:1847 src/libslic3r/PrintConfig.cpp:1915 #: src/libslic3r/PrintConfig.cpp:2074 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:442 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:881 #: src/libslic3r/PrintConfig.cpp:1700 src/libslic3r/PrintConfig.cpp:1751 #: src/libslic3r/PrintConfig.cpp:1958 src/libslic3r/PrintConfig.cpp:2086 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:452 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:454 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:460 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:462 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:472 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:484 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:494 msgid "Radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:495 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:505 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:506 src/libslic3r/PrintConfig.cpp:566 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:512 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:513 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:522 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:523 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:528 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:529 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:537 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:539 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:548 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:549 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:554 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:555 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:557 src/libslic3r/PrintConfig.cpp:1687 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:565 msgid "Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:571 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:572 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:580 src/libslic3r/PrintConfig.cpp:1231 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:581 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:590 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:591 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:598 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:599 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:606 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:607 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:615 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:616 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:623 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:624 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:633 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:634 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:642 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:643 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:650 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:651 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:655 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:661 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:662 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:669 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:670 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:677 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:678 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:684 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:685 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:693 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:700 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:701 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:704 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:709 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:710 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:736 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:737 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:743 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:744 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:753 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:755 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:767 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:769 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:804 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:806 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:822 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:823 msgid "Triangles" msgstr "" #: src/libslic3r/PrintConfig.cpp:824 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:825 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:826 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:828 src/libslic3r/PrintConfig.cpp:1974 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:829 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:830 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:837 src/libslic3r/PrintConfig.cpp:846 #: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:887 msgid "First layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:838 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:847 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:856 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:868 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates. This can be expressed as an absolute value or as a percentage (for " "example: 150%) over the default layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:877 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:878 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:888 msgid "" "Extruder temperature for first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output file." msgstr "" #: src/libslic3r/PrintConfig.cpp:897 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:905 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:906 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:913 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:914 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents Slic3r from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:937 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:942 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:943 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:950 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:951 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:959 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:967 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:969 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:972 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:978 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:980 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:988 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:997 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:998 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1003 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1005 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1012 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1014 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1025 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1033 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1034 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1047 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1048 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1057 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1068 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1069 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1077 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1078 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1102 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1103 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1104 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1105 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1108 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1109 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1110 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1111 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1120 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1121 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1122 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1123 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1126 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1127 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1128 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1129 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1138 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1139 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1140 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1141 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1144 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1145 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1146 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1147 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1158 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1160 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1169 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1171 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1180 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1182 msgid "Maximum acceleration when extruding (M204 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1191 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1193 msgid "Maximum acceleration when retracting (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1201 src/libslic3r/PrintConfig.cpp:1210 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1202 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1211 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1221 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1222 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1232 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1241 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1242 src/libslic3r/PrintConfig.cpp:1253 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1246 src/libslic3r/PrintConfig.cpp:1257 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1252 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1264 src/libslic3r/PrintConfig.cpp:1273 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1265 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1274 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1282 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1283 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1290 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1291 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1300 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1301 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1311 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1316 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1317 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1328 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1329 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1336 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1343 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1344 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1353 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1355 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1361 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1362 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1370 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1371 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1379 src/libslic3r/PrintConfig.cpp:1397 #: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1419 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1380 msgid "" "This is the acceleration your printer will use for perimeters. A high value " "like 9000 usually gives good results if your hardware is up to the job. Set " "zero to disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1388 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1390 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1399 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1411 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1421 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1425 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1433 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1445 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1446 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1451 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1452 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:1460 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1461 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:1466 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:1467 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1480 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1482 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:1490 msgid "Resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:1491 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:1501 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1502 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:1508 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:1509 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1516 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1517 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:1522 src/libslic3r/PrintConfig.cpp:1530 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1523 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1524 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1526 src/libslic3r/PrintConfig.cpp:1535 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1531 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1532 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1540 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1541 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:1548 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1549 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:1550 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1557 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1558 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1559 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1567 src/libslic3r/PrintConfig.cpp:1575 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:1568 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1576 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1584 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1585 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1591 src/libslic3r/PrintConfig.cpp:1592 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1593 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:1600 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1602 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:1608 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:1609 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:1610 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:1618 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1620 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:1621 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1628 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1630 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1631 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1641 msgid "USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1648 msgid "Serial port speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1649 msgid "Speed (baud) of USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1658 msgid "Distance from object" msgstr "" #: src/libslic3r/PrintConfig.cpp:1659 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" #: src/libslic3r/PrintConfig.cpp:1666 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:1667 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "" #: src/libslic3r/PrintConfig.cpp:1674 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1675 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1676 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:1684 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1685 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:1695 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1697 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1707 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:1709 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:1710 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1716 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1718 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1724 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1726 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1738 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1748 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1760 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:1766 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:1767 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than an object." msgstr "" #: src/libslic3r/PrintConfig.cpp:1775 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:1776 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:1786 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If Slic3r detects M104 or M190 in your custom codes, " "such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all Slic3r settings, so you can put a " "\"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:1801 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands " "will not be prepended automatically so you're free to customize the order of " "heating commands and other custom actions. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:1817 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1818 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:1823 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:1824 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1829 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1831 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:1835 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:1837 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:1843 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:1845 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1855 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:1857 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:1867 src/libslic3r/PrintConfig.cpp:2531 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1873 msgid "Contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1875 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1882 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1883 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1888 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:1890 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:1895 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1901 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1903 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1912 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1920 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1922 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:1927 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1929 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:1936 msgid "Interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1938 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1945 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1947 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:1956 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1965 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:1967 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1973 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1979 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1981 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:1990 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1997 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1999 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2005 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2007 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2019 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2021 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2028 msgid "" "Extruder temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:2036 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2038 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2044 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2045 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2057 msgid "" "This custom code is inserted at every extruder change. If you don't leave " "this empty, you are expected to take care of the toolchange yourself - " "PrusaSlicer will not output any other G-code to change the filament. You can " "use placeholder variables for all Slic3r settings as well as " "[previous_extruder] and [next_extruder], so e.g. the standard toolchange " "command can be scripted as T[next_extruder]." msgstr "" #: src/libslic3r/PrintConfig.cpp:2070 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2081 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2096 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2097 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2103 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2111 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2112 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2118 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2119 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2125 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2126 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2136 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2137 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2143 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2144 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2151 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2157 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2158 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2164 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2165 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2174 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2175 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2181 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2182 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2189 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2195 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2196 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2203 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2204 msgid "" "Purging after toolchange will done inside this object's infills. This lowers " "the amount of waste but may result in longer print time due to additional " "travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2211 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2212 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:2218 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2219 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:2225 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2227 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:2235 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:2236 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2294 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2295 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2300 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2301 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2306 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:2308 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2314 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2319 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2320 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:2321 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2326 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2327 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:2328 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2333 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2334 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:2340 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:2341 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:2346 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:2347 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2348 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2355 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:2356 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2357 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2364 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2365 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2372 src/libslic3r/PrintConfig.cpp:2373 #: src/libslic3r/PrintConfig.cpp:2374 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2380 src/libslic3r/PrintConfig.cpp:2381 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2382 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:2388 src/libslic3r/PrintConfig.cpp:2389 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2390 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:2401 src/libslic3r/PrintConfig.cpp:2402 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2408 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2409 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2416 src/libslic3r/PrintConfig.cpp:2417 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2423 src/libslic3r/PrintConfig.cpp:2424 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2430 src/libslic3r/PrintConfig.cpp:2431 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2437 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2438 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2446 src/libslic3r/PrintConfig.cpp:2457 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:2468 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2470 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:2475 msgid "Support head front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2477 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:2484 msgid "Support head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2486 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:2493 msgid "Support head width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2495 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:2503 msgid "Support pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2505 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:2513 msgid "Support pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2514 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:2522 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:2523 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:2524 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:2536 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2538 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:2547 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2549 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:2557 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2559 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:2566 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2569 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2579 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2581 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:2589 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2591 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:2598 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2600 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:2608 msgid "Object elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2610 msgid "" "How much the supports should lift up the supported object. If this value is " "zero, the bottom of the model geometry will be considered as part of the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2622 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:2628 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:2630 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2636 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:2638 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:2643 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2645 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2653 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2654 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:2667 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2669 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2680 msgid "Pad edge radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2689 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:2691 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2700 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:2702 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:2711 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:2713 msgid "" "Distance between two connector sticks between the object pad and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2721 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2723 msgid "" "The width of the connectors sticks which connect the object pad and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2731 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2734 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:3094 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:3095 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:3106 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:3107 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:3112 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3113 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3117 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3118 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3122 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:3123 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:3128 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:3133 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:3134 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:3139 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:3140 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:3145 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3146 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3150 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3151 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3155 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:3156 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:3160 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3161 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:3171 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:3172 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:3177 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:3198 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3199 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:3203 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:3204 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:3207 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:3208 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:3212 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:3213 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:3216 msgid "Merge" msgstr "" #: src/libslic3r/PrintConfig.cpp:3217 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:3222 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3226 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3230 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3231 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3235 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3236 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3241 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3246 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:3249 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:3250 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:3259 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:3260 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:3263 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3264 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:3267 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:3268 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3278 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:3279 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3282 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:3283 msgid "" "Messages with severity lower or eqal to the loglevel will be printed out. 0:" "trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal" msgstr "" #: src/libslic3r/PrintConfig.cpp:3288 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3289 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/PrintObject.cpp:110 msgid "Processing triangulated mesh" msgstr "" #: src/libslic3r/PrintObject.cpp:141 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:251 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:391 msgid "Generating support material" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:176 msgid "Mixed" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:396 msgid "Height (mm)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:398 msgid "Width (mm)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:400 msgid "Speed (mm/s)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:402 msgid "Volumetric flow rate (mm3/s)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:493 msgid "Default print color" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:500 #, possible-c-format msgid "up to %.2f mm" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:504 #, possible-c-format msgid "above %.2f mm" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:509 #, possible-c-format msgid "%.2f - %.2f mm" msgstr ""