# Print profiles for the Trimaker printers. [vendor] # Vendor name will be shown by the Config Wizard. name = Trimaker # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. config_version = 1.0.0 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Trimaker/ # changelog_url = # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install. # Printer model name will be shown by the installation wizard. [printer_model:Trimaker Nebula Cloud] name = Trimaker Nebula Cloud family = Nebula variants = 0.4 technology = FFF bed_model = NebulaCloud_bed.stl bed_texture = NebulaCloud.svg thumbnail = NPC_thumbnail.png default_materials = Generic PLA @Trimaker Nebula Cloud [printer_model:Trimaker Cosmos II] name = Trimaker Cosmos II family = Cosmos variants = 0.4 technology = FFF bed_model = CosmosII_bed.stl bed_texture = NebulaCosmosII.svg thumbnail = Cosmos_II_thumbnail.png default_materials = Generic PLA @Trimaker Nebula Cloud [printer_model:Trimaker Nebula ] name = Trimaker Nebula family = Nebula variants = 0.4 technology = FFF bed_model = NebulaCloud_bed.stl bed_texture = NebulaCloud.svg thumbnail = Nebula_thumbnail.png default_materials = Generic PLA @Trimaker Nebula Cloud # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. # Common print preset [print:*common*] avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bridge_angle = 0 bridge_flow_ratio = 0.95 bridge_speed = 25 brim_width = 0 clip_multipart_objects = 1 compatible_printers = complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeters_first = 0 external_perimeter_extrusion_width = 0.45 extra_perimeters = 0 extruder_clearance_height = 25 extruder_clearance_radius = 45 fill_angle = 45 fill_density = 15% fill_pattern = gyroid first_layer_extrusion_width = 0.42 first_layer_speed = 20 first_layer_acceleration = 1000 first_layer_acceleration_over_raft = 0 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 30 gcode_comments = 0 gcode_label_objects = 1 infill_anchor = 2.5 infill_anchor_max = 12 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% interface_shells = 0 max_print_speed = 150 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = overhangs = 1 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode perimeters = 3 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_generator = arachne post_process = print_settings_id = raft_layers = 0 resolution = 0 top_fill_pattern = monotonic bottom_fill_pattern = monotonic seam_position = aligned single_extruder_multi_material_priming = 1 skirts = 1 skirt_distance = 2 skirt_height = 2 small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 spiral_vase = 0 standby_temperature_delta = -5 auto_generated_supports = 0 support_material = 1 support_material_auto = 1 support_material_style = snug support_material_extruder = 0 support_material_extrusion_width = 0 support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_enforce_layers = 0 support_material_contact_distance = 0.22 support_material_interface_contact_loops = 0 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.3 support_material_interface_speed = 80% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 50 support_material_with_sheath = 1 support_material_xy_spacing = 0.5 support_material_bottom_contact_distance = 0 raft_first_layer_expansion = 0 support_material_bottom_interface_layers = -1 raft_contact_distance = 0.2 thin_walls = 0 top_infill_extrusion_width = 0.45 travel_speed = 100 wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 140 xy_size_compensation = 0 infill_acceleration = 1000 external_perimeter_speed = 30 perimeter_speed = 45 solid_infill_speed = 40 top_solid_infill_speed = 30 infill_speed = 50 #///////////////////////////////////////////////////////# #---------------# LAYER HEIGHT SETTINGS #---------------# #///////////////////////////////////////////////////////# [print:*0.10mm*] inherits = *common* layer_height = 0.1 first_layer_height = 0.15 bottom_solid_layers = 4 top_solid_layers = 9 perimeters = 5 bridge_flow_ratio = 0.6 infill_acceleration = 1500 max_print_speed = 200 bridge_speed = 30 support_material_contact_distance = 0.10 support_material_interface_layers = 2 support_material_threshold = 55 [print:*0.20mm*] inherits = *common* layer_height = 0.2 first_layer_height = 0.3 bottom_solid_layers = 4 top_solid_layers = 4 bridge_flow_ratio = 0.8 support_material_contact_distance = 0.20 [print:*0.30mm*] inherits = *common* layer_height = 0.3 first_layer_height = 0.35 bottom_solid_layers = 3 top_solid_layers = 4 bridge_flow_ratio = 0.9 support_material_contact_distance = 0.25 infill_extrusion_width = 0.61 #////////////////////////////////////////////////# #---------------# PRINT SETTINGS #---------------# #////////////////////////////////////////////////# #-----------# 0,4 NOZZLE #-----------# [print:0.1 Layer - 0,4 Nozzle] inherits = *0.10mm* # alias = 0.10mm DETAIL 0,4 compatible_printers_condition = nozzle_diameter[0]==0.4 [print:0.2 Layer - 0,4 Nozzle] inherits = *0.20mm* # alias = 0.20mm NORMAL 0,4 compatible_printers_condition = nozzle_diameter[0]==0.4 [print:0.3 Layer - 0,4 Nozzle] inherits = *0.30mm* # alias = 0.30mm DRAFT 0,4 compatible_printers_condition = nozzle_diameter[0]==0.4 #///////////////////////////////////////////////////# #---------------# FILAMENT SETTINGS #---------------# #///////////////////////////////////////////////////# [filament:*common*] cooling = 0 compatible_printers = extrusion_multiplier = 1 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 filament_notes = "" filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 20 [filament:*PLA*] inherits = *common* bed_temperature = 60 fan_below_layer_time = 100 filament_max_volumetric_speed = 15 filament_type = PLA filament_density = 1.24 filament_cost = 20 first_layer_bed_temperature = 60 first_layer_temperature = 200 fan_always_on = 1 cooling = 1 max_fan_speed = 100 min_fan_speed = 100 bridge_fan_speed = 100 disable_fan_first_layers = 1 temperature = 200 [filament:Generic PLA @Trimaker Nebula Cloud] inherits = *PLA* filament_vendor = Generic #//////////////////////////////////////////////# #---------------# Nozzle sizes #---------------# #//////////////////////////////////////////////# [printer:*0.40nozzle*] nozzle_diameter = 0.40 max_layer_height = 0.35 min_layer_height = 0.1 retract_lift_above = 0.2 printer_variant = 0.4 #//////////////////////////////////////////////////# #---------------# PRINTER PROFILES #---------------# #//////////////////////////////////////////////////# [printer:*common*] printer_technology = FFF before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n between_objects_gcode = deretract_speed = 0 extruder_colour = #FFFF00 extruder_offset = 0x0 gcode_flavor = marlin2 silent_mode = 0 remaining_times = 0 machine_max_acceleration_e = 5000,5000 machine_max_acceleration_extruding = 1250,12500 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_x = 1000,960 machine_max_acceleration_y = 1000,960 machine_max_acceleration_z = 200,200 machine_max_feedrate_e = 120,120 machine_max_feedrate_x = 200,100 machine_max_feedrate_y = 200,100 machine_max_feedrate_z = 12,12 machine_max_jerk_e = 4.5,4.5 machine_max_jerk_x = 8,8 machine_max_jerk_y = 8,8 machine_max_jerk_z = 0.4,0.4 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] max_layer_height = 0.5 min_layer_height = 0.07 octoprint_apikey = octoprint_host = printer_notes = printer_settings_id = retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 1 retract_length_toolchange = 1 retract_lift = 0 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 35 serial_port = serial_speed = 250000 single_extruder_multi_material = 0 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG29 ; bed leveling\nM500\nG1 Z0.15 F2400\nG1 F2000 X0.5 Y0.5 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0 end_gcode =;Trimaker Nebula End Code\n M107; Apagamos fan\n G90\n G92 E0\n G1 X0 Y200\n G91\n G1 Z5\n G92 E0\n M140 S0; Enfriamos\n M104 S0; Enfriamos\n M84\n G90\n M117 Impresion finalizada\n M300 S440 P700\n toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 z_offset = 0 cooling_tube_length = 5 cooling_tube_retraction = 91.5 [printer:*Trimaker Nebula Cloud*] inherits = *common* bed_shape = 0x0,230x0,230x230,0x230 max_print_height = 260 printer_model = Trimaker Nebula Cloud [printer:*Trimaker Nebula*] inherits = *common* bed_shape = 0x0,230x0,230x230,0x230 max_print_height = 260 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG1 Z0.15 F2400\nG1 F200 X0.5 Y0.5 Z0.300\n G1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0 printer_model = Trimaker Nebula [printer:*Trimaker Cosmos II*] inherits = *common* bed_shape = 0x0,200x0,200x200,0x200 max_print_height = 200 printer_model = Trimaker Cosmos II #//////////////////////////////////////////////////# #----------------# PRINTER MODELS #----------------# #//////////////////////////////////////////////////# [printer:Trimaker Nebula Cloud 0.4 nozzle] inherits = *Trimaker Nebula Cloud*; *0.40nozzle* default_print_profile = 0.2 Layer - 0,4 Nozzle [printer:Trimaker Nebula 0.4 nozzle] inherits = *Trimaker Nebula*; *0.40nozzle* default_print_profile = 0.2 Layer - 0,4 Nozzle [printer:Trimaker Cosmos II 0.4 nozzle] inherits = *Trimaker Cosmos II*; *0.40nozzle* default_print_profile = 0.2 Layer - 0,4 Nozzle