# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-19 13:45+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:43 src/slic3r/GUI/AboutDialog.cpp:48 #: src/slic3r/GUI/AboutDialog.cpp:317 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:281 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:141 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:212 src/slic3r/GUI/AboutDialog.cpp:215 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:256 src/slic3r/GUI/GUI_App.cpp:239 #: src/slic3r/GUI/MainFrame.cpp:164 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:283 src/slic3r/GUI/GUI_App.cpp:244 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:284 src/slic3r/GUI/GUI_App.cpp:244 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:285 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:286 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:62 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:144 msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:147 msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:150 msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:153 msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:156 msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:520 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:165 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:170 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:219 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:214 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:522 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:545 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:93 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:166 #: src/slic3r/GUI/Tab.cpp:2493 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:94 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:745 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:110 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:121 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:236 #: src/slic3r/GUI/ConfigWizard.cpp:1336 src/slic3r/GUI/ConfigWizard.cpp:1350 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87 #: src/slic3r/GUI/GCodeViewer.cpp:2183 src/slic3r/GUI/GCodeViewer.cpp:2189 #: src/slic3r/GUI/GCodeViewer.cpp:2197 src/slic3r/GUI/GUI_ObjectLayers.cpp:145 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487 #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 #: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75 #: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:93 #: src/libslic3r/PrintConfig.cpp:124 src/libslic3r/PrintConfig.cpp:222 #: src/libslic3r/PrintConfig.cpp:280 src/libslic3r/PrintConfig.cpp:355 #: src/libslic3r/PrintConfig.cpp:363 src/libslic3r/PrintConfig.cpp:413 #: src/libslic3r/PrintConfig.cpp:541 src/libslic3r/PrintConfig.cpp:552 #: src/libslic3r/PrintConfig.cpp:570 src/libslic3r/PrintConfig.cpp:748 #: src/libslic3r/PrintConfig.cpp:1158 src/libslic3r/PrintConfig.cpp:1339 #: src/libslic3r/PrintConfig.cpp:1400 src/libslic3r/PrintConfig.cpp:1418 #: src/libslic3r/PrintConfig.cpp:1436 src/libslic3r/PrintConfig.cpp:1492 #: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1624 #: src/libslic3r/PrintConfig.cpp:1632 src/libslic3r/PrintConfig.cpp:1673 #: src/libslic3r/PrintConfig.cpp:1681 src/libslic3r/PrintConfig.cpp:1691 #: src/libslic3r/PrintConfig.cpp:1699 src/libslic3r/PrintConfig.cpp:1707 #: src/libslic3r/PrintConfig.cpp:1790 src/libslic3r/PrintConfig.cpp:2056 #: src/libslic3r/PrintConfig.cpp:2127 src/libslic3r/PrintConfig.cpp:2161 #: src/libslic3r/PrintConfig.cpp:2290 src/libslic3r/PrintConfig.cpp:2369 #: src/libslic3r/PrintConfig.cpp:2376 src/libslic3r/PrintConfig.cpp:2383 #: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2423 #: src/libslic3r/PrintConfig.cpp:2433 src/libslic3r/PrintConfig.cpp:2593 #: src/libslic3r/PrintConfig.cpp:2627 src/libslic3r/PrintConfig.cpp:2766 #: src/libslic3r/PrintConfig.cpp:2775 src/libslic3r/PrintConfig.cpp:2784 #: src/libslic3r/PrintConfig.cpp:2794 src/libslic3r/PrintConfig.cpp:2859 #: src/libslic3r/PrintConfig.cpp:2869 src/libslic3r/PrintConfig.cpp:2881 #: src/libslic3r/PrintConfig.cpp:2901 src/libslic3r/PrintConfig.cpp:2911 #: src/libslic3r/PrintConfig.cpp:2921 src/libslic3r/PrintConfig.cpp:2939 #: src/libslic3r/PrintConfig.cpp:2954 src/libslic3r/PrintConfig.cpp:2968 #: src/libslic3r/PrintConfig.cpp:2979 src/libslic3r/PrintConfig.cpp:2992 #: src/libslic3r/PrintConfig.cpp:3037 src/libslic3r/PrintConfig.cpp:3047 #: src/libslic3r/PrintConfig.cpp:3056 src/libslic3r/PrintConfig.cpp:3066 #: src/libslic3r/PrintConfig.cpp:3082 src/libslic3r/PrintConfig.cpp:3106 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:131 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:141 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:142 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:314 #: src/libslic3r/ExtrusionEntity.cpp:327 src/libslic3r/ExtrusionEntity.cpp:362 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:145 msgid "Invalid" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222 #: src/slic3r/GUI/GUI_ObjectList.cpp:2215 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:243 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1969 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:315 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413 #: src/slic3r/GUI/Tab.cpp:3423 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:395 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:563 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619 #: src/slic3r/GUI/BedShapeDialog.cpp:642 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:581 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:589 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:593 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:608 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:631 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1295 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:218 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:225 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:16 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:53 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:47 msgid "" "Zero layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:48 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1371 #: src/libslic3r/PrintConfig.cpp:71 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:59 msgid "" "Zero first layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:931 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:80 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:88 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:89 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:114 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:118 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:119 #: src/slic3r/GUI/ConfigManipulation.cpp:139 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:135 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:138 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:158 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:161 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:162 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:207 msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:209 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:210 #: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:93 #: src/slic3r/GUI/GUI_ObjectList.cpp:652 src/slic3r/GUI/Plater.cpp:393 #: src/slic3r/GUI/Tab.cpp:1413 src/slic3r/GUI/Tab.cpp:1414 #: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:450 #: src/libslic3r/PrintConfig.cpp:472 src/libslic3r/PrintConfig.cpp:812 #: src/libslic3r/PrintConfig.cpp:826 src/libslic3r/PrintConfig.cpp:863 #: src/libslic3r/PrintConfig.cpp:1025 src/libslic3r/PrintConfig.cpp:1035 #: src/libslic3r/PrintConfig.cpp:1053 src/libslic3r/PrintConfig.cpp:1072 #: src/libslic3r/PrintConfig.cpp:1091 src/libslic3r/PrintConfig.cpp:1843 #: src/libslic3r/PrintConfig.cpp:1860 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:322 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:324 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:335 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:337 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 src/libslic3r/PrintConfig.cpp:132 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27 #: src/slic3r/GUI/GUI_Preview.cpp:299 src/libslic3r/ExtrusionEntity.cpp:310 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/libslic3r/Preset.cpp:1300 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 src/libslic3r/Preset.cpp:1304 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 src/slic3r/GUI/Tab.cpp:1289 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:104 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:236 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:240 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:307 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:307 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:308 src/slic3r/GUI/ConfigWizard.cpp:598 #: src/slic3r/GUI/Tab.cpp:3507 src/slic3r/GUI/UnsavedChangesDialog.cpp:921 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:309 src/slic3r/GUI/ConfigWizard.cpp:599 #: src/slic3r/GUI/Plater.cpp:365 src/slic3r/GUI/Plater.cpp:505 #: src/libslic3r/ExtrusionEntity.cpp:312 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:445 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:447 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:449 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:451 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:456 msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:499 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:587 msgid "Printer:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:589 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:590 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:662 src/slic3r/GUI/ConfigWizard.cpp:812 #: src/slic3r/GUI/ConfigWizard.cpp:873 src/slic3r/GUI/ConfigWizard.cpp:1007 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:691 msgid "" "Filaments marked with * are not compatible with some installed " "printers." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:694 msgid "All installed printers are compatible with the selected filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:714 msgid "" "Only the following installed printers are compatible with the selected " "filament:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1091 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1091 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1093 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1095 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1120 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1120 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1128 src/slic3r/GUI/Preferences.cpp:81 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1132 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1138 src/slic3r/GUI/Preferences.cpp:97 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1142 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1145 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1150 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1157 src/slic3r/GUI/GUI_ObjectList.cpp:1793 #: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3028 #: src/slic3r/GUI/Plater.cpp:3852 src/slic3r/GUI/Plater.cpp:3881 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1160 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1164 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1172 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1174 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1179 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1180 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1181 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1187 msgid "The size of the object can be specified in inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1188 msgid "Use inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1222 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1226 #, possible-c-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1257 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1257 src/slic3r/GUI/Tab.cpp:2132 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1261 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1295 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1298 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1318 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1318 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1332 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1335 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1345 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1346 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1349 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1383 msgid "Extruder and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1383 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1399 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1400 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1403 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1404 src/slic3r/GUI/ConfigWizard.cpp:1418 #: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:912 #: src/libslic3r/PrintConfig.cpp:956 src/libslic3r/PrintConfig.cpp:2209 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1413 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1414 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1417 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1872 src/slic3r/GUI/ConfigWizard.cpp:2524 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1872 src/slic3r/GUI/ConfigWizard.cpp:2526 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1926 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1931 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2237 src/slic3r/GUI/DoubleSlider.cpp:2124 #: src/slic3r/GUI/DoubleSlider.cpp:2144 src/slic3r/GUI/GUI.cpp:244 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2257 msgid "The following FFF printer models have no filament selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2261 msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2275 msgid "The following SLA printer models have no materials selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2279 msgid "Do you want to select default SLA materials for these printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2487 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2490 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2491 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2492 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2493 src/slic3r/GUI/FirmwareDialog.cpp:151 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:644 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2506 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2509 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2524 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2524 src/slic3r/GUI/ConfigWizard.cpp:2526 #: src/slic3r/GUI/GUI_ObjectList.cpp:4016 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2526 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2624 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2625 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2627 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2628 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:110 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1064 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1066 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1071 src/slic3r/GUI/DoubleSlider.cpp:1852 msgid "Jump to move" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1075 #, possible-c-format msgid "Jump to height %s or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1077 src/slic3r/GUI/DoubleSlider.cpp:1721 #: src/slic3r/GUI/DoubleSlider.cpp:1852 src/slic3r/GUI/DoubleSlider.cpp:1856 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1083 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1093 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1107 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1109 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1111 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1112 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1114 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1115 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1121 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1130 msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1131 msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1133 msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1135 msgid "Custom template (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1137 msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1144 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1146 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1149 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1152 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1155 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1160 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1162 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1163 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1263 src/slic3r/GUI/DoubleSlider.cpp:1297 #: src/slic3r/GUI/GLCanvas3D.cpp:983 src/slic3r/GUI/GUI_ObjectList.cpp:1832 #: src/slic3r/GUI/Tab.cpp:2489 src/libslic3r/GCode/PreviewData.cpp:450 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1264 src/slic3r/GUI/GUI_ObjectList.cpp:1833 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1273 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1273 src/slic3r/GUI/GUI_ObjectList.cpp:1800 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1274 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1276 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1298 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1306 msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1307 msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1665 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1675 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1679 msgid "Add custom template" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1682 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1700 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1701 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1702 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1708 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1709 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1710 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1711 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1728 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1814 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1815 msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1830 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1831 msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1851 msgid "Enter the move you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1851 src/slic3r/GUI/DoubleSlider.cpp:1855 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2118 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2119 src/slic3r/GUI/DoubleSlider.cpp:2134 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2121 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2122 src/slic3r/GUI/DoubleSlider.cpp:2142 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2135 msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" "or CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2138 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2140 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2141 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:496 #: src/slic3r/GUI/GUI_ObjectList.cpp:508 src/slic3r/GUI/GUI_ObjectList.cpp:1015 #: src/slic3r/GUI/GUI_ObjectList.cpp:4454 #: src/slic3r/GUI/GUI_ObjectList.cpp:4464 #: src/slic3r/GUI/GUI_ObjectList.cpp:4499 #: src/slic3r/GUI/ObjectDataViewModel.cpp:202 #: src/slic3r/GUI/ObjectDataViewModel.cpp:259 #: src/slic3r/GUI/ObjectDataViewModel.cpp:284 #: src/slic3r/GUI/ObjectDataViewModel.cpp:492 msgid "default" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52 #: src/libslic3r/PrintConfig.cpp:396 src/libslic3r/PrintConfig.cpp:1038 #: src/libslic3r/PrintConfig.cpp:1613 src/libslic3r/PrintConfig.cpp:1798 #: src/libslic3r/PrintConfig.cpp:1865 src/libslic3r/PrintConfig.cpp:2072 #: src/libslic3r/PrintConfig.cpp:2118 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:184 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:187 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:198 src/slic3r/GUI/OptionsGroup.cpp:715 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:874 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:223 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:243 src/slic3r/GUI/Field.cpp:274 #: src/slic3r/GUI/Field.cpp:1358 src/slic3r/GUI/GUI_ObjectLayers.cpp:413 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/Field.cpp:252 src/slic3r/GUI/Field.cpp:1370 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:288 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:291 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:150 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:199 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:282 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:332 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:436 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:548 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:645 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:647 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:777 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:802 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:805 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:271 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:327 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:807 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:809 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:810 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:841 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:852 #: src/slic3r/GUI/Mouse3DController.cpp:353 #: src/slic3r/GUI/PrintHostDialogs.cpp:159 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:902 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:903 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:906 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:223 msgid "Tool position" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:933 msgid "Generating toolpaths" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1318 msgid "Generating vertex buffer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1392 msgid "Generating index buffers" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2071 msgid "Click to hide" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2071 msgid "Click to show" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2183 msgid "up to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2189 msgid "above" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2197 msgid "from" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2197 msgid "to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2225 src/slic3r/GUI/GCodeViewer.cpp:2233 #: src/slic3r/GUI/GUI_Preview.cpp:275 src/slic3r/GUI/GUI_Preview.cpp:787 #: src/libslic3r/GCode/PreviewData.cpp:350 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2225 src/slic3r/GUI/GCodeViewer.cpp:2233 #: src/slic3r/GUI/RammingChart.cpp:76 msgid "Time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2233 msgid "Percentage" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2236 src/libslic3r/GCode/PreviewData.cpp:352 msgid "Height (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2237 src/libslic3r/GCode/PreviewData.cpp:354 msgid "Width (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2238 src/libslic3r/GCode/PreviewData.cpp:356 msgid "Speed (mm/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2239 src/libslic3r/GCode/PreviewData.cpp:358 msgid "Fan Speed (%)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2240 src/libslic3r/GCode/PreviewData.cpp:360 msgid "Volumetric flow rate (mm³/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2241 src/slic3r/GUI/GUI_Preview.cpp:281 #: src/slic3r/GUI/GUI_Preview.cpp:453 src/slic3r/GUI/GUI_Preview.cpp:693 #: src/slic3r/GUI/GUI_Preview.cpp:786 src/slic3r/GUI/GUI_Preview.cpp:1270 #: src/libslic3r/GCode/PreviewData.cpp:362 msgid "Tool" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2242 src/slic3r/GUI/GUI_Preview.cpp:282 #: src/slic3r/GUI/GUI_Preview.cpp:784 src/libslic3r/GCode/PreviewData.cpp:364 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2277 src/slic3r/GUI/GCodeViewer.cpp:2313 #: src/slic3r/GUI/GCodeViewer.cpp:2318 src/slic3r/GUI/GUI_ObjectList.cpp:296 #: src/slic3r/GUI/Tab.cpp:1780 src/slic3r/GUI/wxExtensions.cpp:515 #: src/libslic3r/PrintConfig.cpp:523 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2289 msgid "Default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2313 msgid "default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2410 src/slic3r/GUI/GCodeViewer.cpp:2438 msgid "Color change" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2436 src/slic3r/GUI/GCodeViewer.cpp:2451 msgid "Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2437 src/slic3r/GUI/GCodeViewer.cpp:2460 #: src/slic3r/GUI/Plater.cpp:1199 msgid "Pause" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2442 src/slic3r/GUI/GCodeViewer.cpp:2445 msgid "Event" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2442 src/slic3r/GUI/GCodeViewer.cpp:2445 msgid "Remaining time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2445 msgid "Duration" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2489 src/slic3r/GUI/GUI_Preview.cpp:335 #: src/slic3r/GUI/GUI_Preview.cpp:1471 src/libslic3r/PrintConfig.cpp:2295 msgid "Travel" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2492 msgid "Movement" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2493 msgid "Extrusion" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2494 src/slic3r/GUI/Tab.cpp:1670 #: src/slic3r/GUI/Tab.cpp:2539 msgid "Retraction" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2525 src/slic3r/GUI/GUI_Preview.cpp:320 #: src/slic3r/GUI/GUI_Preview.cpp:333 msgid "Options" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2528 src/slic3r/GUI/GUI_Preview.cpp:336 #: src/slic3r/GUI/GUI_Preview.cpp:1472 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2529 src/slic3r/GUI/GUI_Preview.cpp:337 #: src/slic3r/GUI/GUI_Preview.cpp:1473 msgid "Deretractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2530 src/slic3r/GUI/GUI_Preview.cpp:1474 msgid "Tool changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2531 src/slic3r/GUI/GUI_Preview.cpp:1475 msgid "Color changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2532 src/slic3r/GUI/GUI_Preview.cpp:1476 msgid "Pause prints" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2533 src/slic3r/GUI/GUI_Preview.cpp:1477 msgid "Custom GCodes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2552 src/slic3r/GUI/GCodeViewer.cpp:2557 #: src/slic3r/GUI/Plater.cpp:246 src/slic3r/GUI/Plater.cpp:1125 #: src/slic3r/GUI/Plater.cpp:1175 src/slic3r/GUI/Plater.cpp:1196 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2552 msgid "Normal mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2557 msgid "Stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2586 msgid "Show stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2591 msgid "Show normal mode" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:231 src/slic3r/GUI/GLCanvas3D.cpp:4978 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:233 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:235 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:237 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:239 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:241 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:243 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:245 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:247 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:249 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:251 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:254 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:260 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:263 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:274 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:280 src/libslic3r/PrintConfig.cpp:547 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:290 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:299 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:565 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:633 msgid "An object outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:634 msgid "A toolpath outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:635 msgid "SLA supports outside the print area were detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:636 msgid "Some objects are not visible." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:638 msgid "" "An object outside the print area was detected.\n" "Resolve the current problem to continue slicing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:910 src/slic3r/GUI/GLCanvas3D.cpp:939 msgid "Default print color" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:940 src/slic3r/GUI/GLCanvas3D.cpp:949 #: src/slic3r/GUI/GLCanvas3D.cpp:988 msgid "Pause print or custom G-code" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:961 #, possible-c-format msgid "up to %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:965 #, possible-c-format msgid "above %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:969 #, possible-c-format msgid "%.2f - %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1001 #, possible-c-format msgid "Color change for Extruder %d at %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1312 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1418 msgid "canvas_tooltip" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1778 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1786 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1794 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2226 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3165 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3249 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3810 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4302 src/slic3r/GUI/GLCanvas3D.cpp:4939 msgid "Switch to Settings" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4303 src/slic3r/GUI/GLCanvas3D.cpp:4939 msgid "Print Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4304 src/slic3r/GUI/GLCanvas3D.cpp:4940 msgid "Filament Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4304 src/slic3r/GUI/GLCanvas3D.cpp:4940 msgid "Material Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4305 src/slic3r/GUI/GLCanvas3D.cpp:4941 msgid "Printer Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4361 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4361 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4382 #, possible-c-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4382 #, possible-c-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4402 src/slic3r/GUI/GLCanvas3D.cpp:4957 #: src/slic3r/GUI/KBShortcutsDialog.cpp:130 src/slic3r/GUI/Search.cpp:426 msgid "Search" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4416 src/slic3r/GUI/GLCanvas3D.cpp:4424 #: src/slic3r/GUI/Search.cpp:433 msgid "Type here to search" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4833 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4841 src/slic3r/GUI/GUI_ObjectList.cpp:1846 #: src/slic3r/GUI/Plater.cpp:3849 src/slic3r/GUI/Plater.cpp:3871 #: src/slic3r/GUI/Tab.cpp:3423 msgid "Delete" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4850 src/slic3r/GUI/KBShortcutsDialog.cpp:124 #: src/slic3r/GUI/Plater.cpp:4774 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4859 src/slic3r/GUI/KBShortcutsDialog.cpp:151 #: src/slic3r/GUI/Plater.cpp:1549 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4859 src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4871 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4880 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4892 src/slic3r/GUI/Plater.cpp:3708 #: src/slic3r/GUI/Plater.cpp:3720 src/slic3r/GUI/Plater.cpp:3858 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4903 src/slic3r/GUI/Plater.cpp:3860 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4916 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4926 src/slic3r/GUI/GUI_ObjectList.cpp:1618 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5028 src/slic3r/GUI/KBShortcutsDialog.cpp:125 #: src/slic3r/GUI/MainFrame.cpp:1187 msgid "Undo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5028 src/slic3r/GUI/GLCanvas3D.cpp:5067 msgid "Click right mouse button to open/close History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5051 msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5067 src/slic3r/GUI/KBShortcutsDialog.cpp:126 #: src/slic3r/GUI/MainFrame.cpp:1190 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5089 msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:7193 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:7212 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:3601 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:172 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:177 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33 msgid "FDM Support Editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:25 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:26 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27 msgid "Cursor size" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28 msgid "Cursor type" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:29 msgid "Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47 msgid "Enforce supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31 msgid "Right mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:373 msgid "Block supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33 msgid "Shift + Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:368 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:378 msgid "Remove selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35 msgid "Remove all selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36 msgid "Circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37 #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 msgid "Sphere" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:136 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:118 msgid "Reset selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:160 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141 msgid "Alt + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:178 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:159 msgid "Paints all facets inside, regardless of their orientation." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:192 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:173 msgid "Ignores facets facing away from the camera." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:203 msgid "Ctrl + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233 msgid "Autoset custom supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235 msgid "Threshold:" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235 msgid "deg" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:239 msgid "Enforce" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242 msgid "Block" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:292 msgid "Block supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:293 msgid "Add supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:41 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44 #: src/libslic3r/PrintConfig.cpp:3098 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:308 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:424 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:624 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:693 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:785 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:835 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:210 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506 #: src/slic3r/GUI/Mouse3DController.cpp:288 #: src/slic3r/GUI/Mouse3DController.cpp:309 msgid "Rotation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:220 src/slic3r/GUI/Plater.cpp:3961 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:221 #: src/libslic3r/PrintConfig.cpp:3089 msgid "Accuracy" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:233 msgid "Least supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:234 msgid "Suface quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:513 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:527 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:546 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562 #: src/libslic3r/PrintConfig.cpp:3650 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563 #: src/libslic3r/PrintConfig.cpp:3665 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:30 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:381 msgid "Enforce seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:383 msgid "Block seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46 msgid "Seam Editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54 #: src/libslic3r/PrintConfig.cpp:2928 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897 msgid "SLA gizmo turned on" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912 msgid "Save changes?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924 msgid "SLA gizmo turned off" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1128 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129 src/slic3r/GUI/GUI.cpp:256 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:478 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:502 #: src/slic3r/GUI/WipeTowerDialog.cpp:45 src/slic3r/GUI/WipeTowerDialog.cpp:366 msgid "Warning" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:639 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:39 msgid "Supports gizmo turned on" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:40 msgid "Seam gizmo turned on" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:47 msgid "Seam gizmo turned off" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:48 msgid "Supports gizmo turned off" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:371 msgid "Add supports" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:243 msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:245 msgid "" "Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas " "Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:246 msgid "Artwork model by Nora Al-Badri and Jan Nikolai Nelles" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:528 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:531 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:655 src/slic3r/GUI/GUI_App.cpp:670 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:661 msgid "" "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:718 #, possible-c-format msgid "" "%s\n" "Do you want to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:720 src/slic3r/GUI/UnsavedChangesDialog.cpp:653 msgid "Remember my choice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:759 msgid "Loading configuration..." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:825 msgid "Creating settings tabs..." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1078 msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1082 msgid "" "But from this version of PrusaSlicer we don't show/use this information in " "Printer Settings.\n" "Now, this information will be exposed in physical printers settings." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1084 msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1087 src/slic3r/GUI/Tab.cpp:3435 msgid "Information" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1102 src/slic3r/GUI/GUI_App.cpp:1115 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1120 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1125 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1208 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1220 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1233 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1245 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1295 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1295 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1425 msgid "modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1474 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1480 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1480 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1481 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1481 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1482 msgid "Check for updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1482 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1487 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1493 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1504 src/slic3r/GUI/wxExtensions.cpp:673 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1504 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1506 src/slic3r/GUI/wxExtensions.cpp:675 msgctxt "Mode" msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1506 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1507 src/slic3r/GUI/wxExtensions.cpp:676 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1507 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1512 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1512 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1517 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1522 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1522 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1540 msgid "Taking configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1540 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1605 src/slic3r/GUI/GUI_App.cpp:1614 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1608 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1610 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1645 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1676 msgid "The preset(s) modifications are successfully saved" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1876 src/slic3r/GUI/Tab.cpp:3187 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1877 msgid "Please check and fix your object list." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1878 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210 #: src/slic3r/GUI/Plater.cpp:2256 src/slic3r/GUI/Tab.cpp:3189 msgid "Attention!" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1895 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:161 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:165 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:92 #: src/slic3r/GUI/GUI_ObjectList.cpp:651 src/libslic3r/PrintConfig.cpp:72 #: src/libslic3r/PrintConfig.cpp:209 src/libslic3r/PrintConfig.cpp:218 #: src/libslic3r/PrintConfig.cpp:442 src/libslic3r/PrintConfig.cpp:506 #: src/libslic3r/PrintConfig.cpp:514 src/libslic3r/PrintConfig.cpp:932 #: src/libslic3r/PrintConfig.cpp:1119 src/libslic3r/PrintConfig.cpp:1482 #: src/libslic3r/PrintConfig.cpp:1549 src/libslic3r/PrintConfig.cpp:1730 #: src/libslic3r/PrintConfig.cpp:2217 src/libslic3r/PrintConfig.cpp:2276 #: src/libslic3r/PrintConfig.cpp:2285 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95 #: src/slic3r/GUI/GUI_ObjectList.cpp:654 src/slic3r/GUI/GUI_Preview.cpp:311 #: src/slic3r/GUI/Tab.cpp:1449 src/slic3r/GUI/Tab.cpp:1450 #: src/libslic3r/ExtrusionEntity.cpp:324 src/libslic3r/ExtrusionEntity.cpp:356 #: src/libslic3r/PrintConfig.cpp:404 src/libslic3r/PrintConfig.cpp:1610 #: src/libslic3r/PrintConfig.cpp:2008 src/libslic3r/PrintConfig.cpp:2014 #: src/libslic3r/PrintConfig.cpp:2022 src/libslic3r/PrintConfig.cpp:2034 #: src/libslic3r/PrintConfig.cpp:2044 src/libslic3r/PrintConfig.cpp:2052 #: src/libslic3r/PrintConfig.cpp:2067 src/libslic3r/PrintConfig.cpp:2088 #: src/libslic3r/PrintConfig.cpp:2100 src/libslic3r/PrintConfig.cpp:2116 #: src/libslic3r/PrintConfig.cpp:2125 src/libslic3r/PrintConfig.cpp:2134 #: src/libslic3r/PrintConfig.cpp:2145 src/libslic3r/PrintConfig.cpp:2159 #: src/libslic3r/PrintConfig.cpp:2167 src/libslic3r/PrintConfig.cpp:2168 #: src/libslic3r/PrintConfig.cpp:2177 src/libslic3r/PrintConfig.cpp:2185 #: src/libslic3r/PrintConfig.cpp:2199 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99 #: src/slic3r/GUI/GUI_ObjectList.cpp:658 src/libslic3r/PrintConfig.cpp:2395 #: src/libslic3r/PrintConfig.cpp:2403 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:45 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:51 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:52 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:53 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:54 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:94 src/slic3r/GUI/GUI_ObjectList.cpp:653 #: src/slic3r/GUI/GUI_Preview.cpp:307 src/slic3r/GUI/Tab.cpp:1420 #: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/ExtrusionEntity.cpp:348 #: src/libslic3r/PrintConfig.cpp:1126 src/libslic3r/PrintConfig.cpp:1132 #: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:1156 msgid "Ironing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:655 #: src/slic3r/GUI/GUI_Preview.cpp:278 src/slic3r/GUI/Tab.cpp:1474 #: src/libslic3r/PrintConfig.cpp:269 src/libslic3r/PrintConfig.cpp:494 #: src/libslic3r/PrintConfig.cpp:963 src/libslic3r/PrintConfig.cpp:1092 #: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1539 #: src/libslic3r/PrintConfig.cpp:1776 src/libslic3r/PrintConfig.cpp:1831 #: src/libslic3r/PrintConfig.cpp:1883 src/libslic3r/PrintConfig.cpp:2261 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:656 #: src/slic3r/GUI/Tab.cpp:1510 src/slic3r/GUI/Tab.cpp:2072 #: src/libslic3r/PrintConfig.cpp:524 src/libslic3r/PrintConfig.cpp:1046 #: src/libslic3r/PrintConfig.cpp:1517 src/libslic3r/PrintConfig.cpp:1852 #: src/libslic3r/PrintConfig.cpp:2080 src/libslic3r/PrintConfig.cpp:2107 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:657 #: src/libslic3r/PrintConfig.cpp:483 src/libslic3r/PrintConfig.cpp:591 #: src/libslic3r/PrintConfig.cpp:919 src/libslic3r/PrintConfig.cpp:1054 #: src/libslic3r/PrintConfig.cpp:1526 src/libslic3r/PrintConfig.cpp:1872 #: src/libslic3r/PrintConfig.cpp:2089 src/libslic3r/PrintConfig.cpp:2249 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:102 src/slic3r/GUI/GUI_ObjectList.cpp:661 #: src/slic3r/GUI/Tab.cpp:1409 src/slic3r/GUI/Tab.cpp:1430 #: src/slic3r/GUI/Tab.cpp:1531 src/slic3r/GUI/Tab.cpp:1534 #: src/slic3r/GUI/Tab.cpp:1816 src/slic3r/GUI/Tab.cpp:2152 #: src/slic3r/GUI/Tab.cpp:4080 src/libslic3r/PrintConfig.cpp:90 #: src/libslic3r/PrintConfig.cpp:121 src/libslic3r/PrintConfig.cpp:257 #: src/libslic3r/PrintConfig.cpp:1081 src/libslic3r/PrintConfig.cpp:2419 #: src/libslic3r/PrintConfig.cpp:2591 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:663 #: src/slic3r/GUI/Plater.cpp:361 src/slic3r/GUI/Tab.cpp:4014 #: src/slic3r/GUI/Tab.cpp:4015 src/libslic3r/PrintConfig.cpp:2757 #: src/libslic3r/PrintConfig.cpp:2764 src/libslic3r/PrintConfig.cpp:2773 #: src/libslic3r/PrintConfig.cpp:2782 src/libslic3r/PrintConfig.cpp:2792 #: src/libslic3r/PrintConfig.cpp:2802 src/libslic3r/PrintConfig.cpp:2839 #: src/libslic3r/PrintConfig.cpp:2846 src/libslic3r/PrintConfig.cpp:2857 #: src/libslic3r/PrintConfig.cpp:2867 src/libslic3r/PrintConfig.cpp:2876 #: src/libslic3r/PrintConfig.cpp:2889 src/libslic3r/PrintConfig.cpp:2899 #: src/libslic3r/PrintConfig.cpp:2908 src/libslic3r/PrintConfig.cpp:2918 #: src/libslic3r/PrintConfig.cpp:2929 src/libslic3r/PrintConfig.cpp:2937 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:664 #: src/slic3r/GUI/Plater.cpp:501 src/slic3r/GUI/Tab.cpp:4055 #: src/slic3r/GUI/Tab.cpp:4056 src/slic3r/GUI/Tab.cpp:4127 #: src/libslic3r/PrintConfig.cpp:2945 src/libslic3r/PrintConfig.cpp:2952 #: src/libslic3r/PrintConfig.cpp:2966 src/libslic3r/PrintConfig.cpp:2977 #: src/libslic3r/PrintConfig.cpp:2987 src/libslic3r/PrintConfig.cpp:3009 #: src/libslic3r/PrintConfig.cpp:3020 src/libslic3r/PrintConfig.cpp:3027 #: src/libslic3r/PrintConfig.cpp:3034 src/libslic3r/PrintConfig.cpp:3045 #: src/libslic3r/PrintConfig.cpp:3054 src/libslic3r/PrintConfig.cpp:3063 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:4073 #: src/slic3r/GUI/Tab.cpp:4074 src/libslic3r/SLA/Hollowing.cpp:45 #: src/libslic3r/SLA/Hollowing.cpp:57 src/libslic3r/SLA/Hollowing.cpp:66 #: src/libslic3r/SLA/Hollowing.cpp:75 src/libslic3r/PrintConfig.cpp:3073 #: src/libslic3r/PrintConfig.cpp:3080 src/libslic3r/PrintConfig.cpp:3090 #: src/libslic3r/PrintConfig.cpp:3099 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:284 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:300 src/slic3r/GUI/GUI_ObjectList.cpp:441 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:386 #, possible-c-format msgid "Auto-repaired (%d errors):" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:393 msgid "degenerate facets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:394 msgid "edges fixed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:395 msgid "facets removed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:396 msgid "facets added" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:397 msgid "facets reversed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:398 msgid "backwards edges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:406 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:443 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:445 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:449 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:451 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:574 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:589 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:589 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1215 #: src/slic3r/GUI/GUI_ObjectList.cpp:4244 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1230 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1230 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1306 #: src/slic3r/GUI/GUI_ObjectList.cpp:1661 #: src/slic3r/GUI/GUI_ObjectList.cpp:1667 #: src/slic3r/GUI/GUI_ObjectList.cpp:2008 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1396 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1445 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1446 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1447 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1517 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1518 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1519 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1558 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 #: src/slic3r/GUI/GUI_ObjectList.cpp:1595 #: src/slic3r/GUI/GUI_ObjectList.cpp:1599 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1631 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1640 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1718 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1728 #: src/slic3r/GUI/GUI_ObjectList.cpp:1740 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1740 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1750 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1765 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1776 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1786 src/slic3r/GUI/Plater.cpp:3884 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1793 #: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3852 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1800 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1832 src/libslic3r/PrintConfig.cpp:369 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1852 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1852 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1858 src/slic3r/GUI/Plater.cpp:4886 msgid "Convert from imperial units" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1861 src/slic3r/GUI/Plater.cpp:4886 msgid "Revert conversion from imperial units" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1868 #: src/slic3r/GUI/GUI_ObjectList.cpp:1876 #: src/slic3r/GUI/GUI_ObjectList.cpp:2569 src/libslic3r/PrintConfig.cpp:3641 msgid "Merge" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1868 msgid "Merge objects to the one multipart object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1876 msgid "Merge objects to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1953 #: src/slic3r/GUI/GUI_ObjectList.cpp:2210 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2038 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2077 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2152 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2181 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2307 #: src/slic3r/GUI/GUI_ObjectList.cpp:2408 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2319 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2341 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2357 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2389 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2393 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2412 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2436 src/slic3r/GUI/Plater.cpp:2771 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2440 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2576 msgid "Merged" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2660 msgid "Merge all parts to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2692 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2846 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2858 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2871 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2875 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2880 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2886 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2892 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2899 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2899 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3083 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3221 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3297 #: src/slic3r/GUI/GUI_ObjectList.cpp:3325 #: src/slic3r/GUI/GUI_ObjectList.cpp:3345 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3391 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3395 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" "The gap between the current layer range and the next layer range\n" "is thinner than the minimum layer height allowed." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3400 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3459 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3754 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3762 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3880 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3881 #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3881 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3883 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3884 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3885 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3888 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3893 #: src/slic3r/GUI/GUI_ObjectList.cpp:3968 src/slic3r/GUI/Plater.cpp:147 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4009 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4016 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4021 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4266 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4266 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4282 #: src/slic3r/GUI/GUI_ObjectList.cpp:4409 #: src/slic3r/GUI/SavePresetDialog.cpp:116 #: src/slic3r/GUI/SavePresetDialog.cpp:124 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4283 #: src/slic3r/GUI/GUI_ObjectList.cpp:4410 #: src/slic3r/GUI/SavePresetDialog.cpp:117 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4458 msgid "Select extruder number:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4459 msgid "This extruder will be set for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4484 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1513 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1513 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:68 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:111 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:69 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:112 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:88 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:623 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:223 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:505 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:271 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487 msgid "in" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:394 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:407 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:561 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:625 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:797 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:828 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:893 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:925 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:928 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:62 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:98 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:104 #, possible-c-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:157 #, possible-c-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:265 src/slic3r/GUI/GUI_Preview.cpp:271 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:276 src/libslic3r/PrintConfig.cpp:536 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:277 src/libslic3r/PrintConfig.cpp:2381 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:279 src/slic3r/GUI/Tab.cpp:1803 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:280 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:286 src/slic3r/GUI/GUI_Preview.cpp:288 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:293 src/slic3r/GUI/GUI_Preview.cpp:295 #: src/slic3r/GUI/GUI_Preview.cpp:316 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:301 src/libslic3r/ExtrusionEntity.cpp:314 #: src/libslic3r/ExtrusionEntity.cpp:336 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:302 src/libslic3r/ExtrusionEntity.cpp:315 #: src/libslic3r/ExtrusionEntity.cpp:338 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:303 src/libslic3r/ExtrusionEntity.cpp:316 #: src/libslic3r/ExtrusionEntity.cpp:340 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:304 src/libslic3r/ExtrusionEntity.cpp:317 #: src/libslic3r/ExtrusionEntity.cpp:342 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:305 src/libslic3r/ExtrusionEntity.cpp:318 #: src/libslic3r/ExtrusionEntity.cpp:344 src/libslic3r/PrintConfig.cpp:1871 #: src/libslic3r/PrintConfig.cpp:1882 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:306 src/libslic3r/ExtrusionEntity.cpp:319 #: src/libslic3r/ExtrusionEntity.cpp:346 src/libslic3r/PrintConfig.cpp:2248 #: src/libslic3r/PrintConfig.cpp:2260 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:308 src/libslic3r/ExtrusionEntity.cpp:321 #: src/libslic3r/ExtrusionEntity.cpp:350 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:309 src/libslic3r/ExtrusionEntity.cpp:322 #: src/libslic3r/ExtrusionEntity.cpp:352 src/libslic3r/PrintConfig.cpp:962 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:310 src/slic3r/GUI/Tab.cpp:1439 #: src/libslic3r/ExtrusionEntity.cpp:323 src/libslic3r/ExtrusionEntity.cpp:354 msgid "Skirt" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:312 src/libslic3r/ExtrusionEntity.cpp:325 #: src/libslic3r/ExtrusionEntity.cpp:358 src/libslic3r/PrintConfig.cpp:2133 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:313 src/slic3r/GUI/Tab.cpp:1521 #: src/libslic3r/ExtrusionEntity.cpp:326 src/libslic3r/ExtrusionEntity.cpp:360 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:338 src/slic3r/GUI/GUI_Preview.cpp:1478 msgid "Shells" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:339 msgid "Legend" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1479 msgid "Tool marker" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1480 msgid "Legend/Estimated printing time" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:800 src/slic3r/GUI/Search.cpp:464 msgid "Use for search" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:801 src/slic3r/GUI/Search.cpp:458 msgid "Category" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:803 src/slic3r/GUI/Search.cpp:460 msgid "Search in English" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:149 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:176 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:183 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Jobs/Job.cpp:74 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:35 msgid "Choose SLA archive:" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:39 msgid "Import file: " msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:46 msgid "Import model and profile" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47 msgid "Import profile only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48 msgid "Import model only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:56 msgid "Quality: " msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:59 msgid "Accurate" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60 msgid "Balanced" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61 msgid "Quick" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135 msgid "Importing SLA archive" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:159 msgid "Importing canceled." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:160 msgid "Importing done." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2254 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2255 #: src/slic3r/GUI/Tab.cpp:3188 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:37 #: src/slic3r/GUI/KBShortcutsDialog.cpp:39 src/slic3r/GUI/MainFrame.cpp:941 #: src/slic3r/GUI/MainFrame.cpp:1332 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:105 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:106 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:107 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:108 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:111 msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:112 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Plater.cpp:766 #: src/slic3r/GUI/Plater.cpp:5706 src/libslic3r/PrintConfig.cpp:3546 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:116 src/slic3r/GUI/Plater.cpp:5707 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:117 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 src/slic3r/GUI/Plater.cpp:755 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:119 msgid "Eject SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:121 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:127 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:128 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:133 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:134 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 #: src/slic3r/GUI/PrintHostDialogs.cpp:136 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 src/slic3r/GUI/Preferences.cpp:12 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:157 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 #: src/slic3r/GUI/KBShortcutsDialog.cpp:205 #: src/slic3r/GUI/KBShortcutsDialog.cpp:215 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 #: src/slic3r/GUI/KBShortcutsDialog.cpp:206 #: src/slic3r/GUI/KBShortcutsDialog.cpp:216 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 #: src/slic3r/GUI/KBShortcutsDialog.cpp:229 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:165 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:165 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:168 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:173 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:174 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:175 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:176 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:177 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:178 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:179 msgid "Switch between Editor/Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:180 msgid "Collapse/Expand the sidebar" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:182 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:190 src/slic3r/GUI/MainFrame.cpp:340 #: src/slic3r/GUI/MainFrame.cpp:352 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:193 #, possible-c-format msgid "" "Press to snap by 5% in Gizmo scale\n" "or to snap by 1mm in Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:194 msgid "" "Scale selection to fit print volume\n" "in Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:195 msgid "Press to activate one direction scaling in Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 msgid "" "Press to scale (in Gizmo scale) or rotate (in Gizmo rotate)\n" "selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:199 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:205 #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 msgid "Upper Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:206 #: src/slic3r/GUI/KBShortcutsDialog.cpp:208 msgid "Lower Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 msgid "Show/Hide Legend/Estimated printing time" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:212 src/slic3r/GUI/Plater.cpp:4052 #: src/slic3r/GUI/Tab.cpp:2559 msgid "Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:215 msgid "Move current slider thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:216 msgid "Move current slider thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 msgid "Set upper thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 msgid "Set lower thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 #: src/slic3r/GUI/KBShortcutsDialog.cpp:231 #: src/slic3r/GUI/KBShortcutsDialog.cpp:232 msgid "" "Press to speed up 5 times while moving thumb\n" "with arrow keys or mouse wheel" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:225 msgid "Layers Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:229 msgid "Move current slider thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 msgid "Move current slider thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:235 msgid "Sequential Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:259 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:1262 msgid "Open new instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:77 #: src/slic3r/GUI/MainFrame.cpp:1262 msgid "Open a new PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:79 msgid "G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:1141 msgid "Open G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:1398 msgid "Open PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:79 msgid "Open new G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:166 msgid "" " - Remember to check for updates at https://github.com/prusa3d/PrusaSlicer/" "releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:535 src/slic3r/GUI/MainFrame.cpp:537 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:909 src/slic3r/GUI/MainFrame.cpp:1308 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:909 src/slic3r/GUI/MainFrame.cpp:1308 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:911 src/slic3r/GUI/MainFrame.cpp:1310 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:911 src/slic3r/GUI/MainFrame.cpp:1310 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:917 src/slic3r/GUI/MainFrame.cpp:1316 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:918 src/slic3r/GUI/MainFrame.cpp:1317 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:924 src/slic3r/GUI/MainFrame.cpp:1323 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:924 src/slic3r/GUI/MainFrame.cpp:1323 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:926 src/slic3r/GUI/MainFrame.cpp:1325 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:926 src/slic3r/GUI/MainFrame.cpp:1325 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:928 src/slic3r/GUI/MainFrame.cpp:1327 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:928 src/slic3r/GUI/MainFrame.cpp:1327 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:933 src/slic3r/GUI/MainFrame.cpp:937 #: src/slic3r/GUI/MainFrame.cpp:1329 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:933 src/slic3r/GUI/MainFrame.cpp:937 #: src/slic3r/GUI/MainFrame.cpp:1329 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:941 src/slic3r/GUI/MainFrame.cpp:1332 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:955 src/slic3r/GUI/MainFrame.cpp:1275 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:955 src/slic3r/GUI/MainFrame.cpp:1275 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:959 src/slic3r/GUI/MainFrame.cpp:1279 #: src/libslic3r/PrintConfig.cpp:2275 src/libslic3r/PrintConfig.cpp:2284 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:959 src/slic3r/GUI/MainFrame.cpp:1279 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:962 src/slic3r/GUI/MainFrame.cpp:1282 #: src/libslic3r/PrintConfig.cpp:208 src/libslic3r/PrintConfig.cpp:217 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:962 src/slic3r/GUI/MainFrame.cpp:1282 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:964 src/slic3r/GUI/MainFrame.cpp:1284 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:964 src/slic3r/GUI/MainFrame.cpp:1284 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:966 src/slic3r/GUI/MainFrame.cpp:1286 #: src/libslic3r/PrintConfig.cpp:1740 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:966 src/slic3r/GUI/MainFrame.cpp:1286 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:968 src/slic3r/GUI/MainFrame.cpp:1288 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:968 src/slic3r/GUI/MainFrame.cpp:1288 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:970 src/slic3r/GUI/MainFrame.cpp:1290 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:970 src/slic3r/GUI/MainFrame.cpp:1290 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:986 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:986 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:989 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:989 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:994 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1003 msgid "" "The selected project is no longer available.\n" "Do you want to remove it from the recent projects list?" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1003 src/slic3r/GUI/MainFrame.cpp:1486 #: src/slic3r/GUI/PrintHostDialogs.cpp:231 msgid "Error" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1028 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1028 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1032 src/slic3r/GUI/MainFrame.cpp:1034 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1032 src/slic3r/GUI/MainFrame.cpp:1034 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1042 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1042 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1046 msgid "Import STL (imperial units)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1046 msgid "Load an model saved with imperial units" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1050 msgid "Import SL1 archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1050 msgid "Load an SL1 output archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1055 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1055 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1058 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1058 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1062 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1062 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1065 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1068 src/slic3r/GUI/MainFrame.cpp:1448 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1068 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1072 src/slic3r/GUI/MainFrame.cpp:1449 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1072 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1076 msgid "Export G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1076 msgid "Export current plate as G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1080 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1080 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1083 msgid "Export plate as STL &including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1083 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1086 msgid "Export plate as &AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1086 msgid "Export current plate as AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1090 src/slic3r/GUI/MainFrame.cpp:1395 msgid "Export &toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1090 src/slic3r/GUI/MainFrame.cpp:1395 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1094 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1094 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1097 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1097 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1100 msgid "Export Config Bundle With Physical Printers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1100 msgid "Export all presets including physical printers to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1103 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1105 msgid "Ejec&t SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1105 msgid "Eject SD card / Flash drive after the G-code was exported to it." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1113 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1113 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1119 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1119 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1125 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1125 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1133 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1133 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1137 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1137 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1141 msgid "&G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1144 src/slic3r/GUI/MainFrame.cpp:1402 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1144 src/slic3r/GUI/MainFrame.cpp:1402 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1171 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1172 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1174 msgid "D&eselect all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1175 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1178 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1179 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1181 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1182 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1186 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1189 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1194 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1195 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1197 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1198 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1202 msgid "Re&load from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1203 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1207 msgid "Searc&h" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1208 msgid "Find option" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1216 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1216 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1221 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1221 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1224 src/slic3r/GUI/MainFrame.cpp:1451 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1224 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1228 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1228 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1234 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1234 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1237 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1237 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1258 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1258 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1294 msgid "Show &labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1294 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1297 msgid "&Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1297 src/slic3r/GUI/Plater.cpp:2144 msgid "Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1347 src/slic3r/GUI/MainFrame.cpp:1357 #: src/slic3r/GUI/MainFrame.cpp:1417 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1348 src/slic3r/GUI/MainFrame.cpp:1358 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1349 src/slic3r/GUI/MainFrame.cpp:1359 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1350 src/slic3r/GUI/MainFrame.cpp:1360 #: src/slic3r/GUI/MainFrame.cpp:1418 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1353 src/slic3r/GUI/MainFrame.cpp:1363 #: src/slic3r/GUI/MainFrame.cpp:1423 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1391 msgid "&Open G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1391 msgid "Open a G-code file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1398 msgid "Open &PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1448 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1449 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1451 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1474 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1485 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1491 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1491 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1492 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1527 #, possible-c-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1527 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1527 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1539 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1548 src/slic3r/GUI/Plater.cpp:2921 #: src/slic3r/GUI/Plater.cpp:5234 src/slic3r/GUI/Tab.cpp:1551 #: src/slic3r/GUI/Tab.cpp:4081 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:1550 #, possible-c-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1573 msgid " was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1575 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1590 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1600 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1612 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1612 src/libslic3r/PrintConfig.cpp:3646 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1626 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1645 src/slic3r/GUI/MainFrame.cpp:1707 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1681 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1728 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:263 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:274 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:279 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:282 #: src/slic3r/GUI/Mouse3DController.cpp:303 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:294 #: src/slic3r/GUI/Mouse3DController.cpp:303 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:300 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:315 msgid "Options:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:318 msgid "Swap Y/Z axes" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:73 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:74 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:317 msgid "Exporting finished." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:317 msgid "Eject drive." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:318 msgid "3D Mouse disconnected." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:321 msgid "Configuration update is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:321 msgid "See more." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:322 msgid "New version is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:322 msgid "See Releases page." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:305 #: src/slic3r/GUI/NotificationManager.cpp:315 msgid "More" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:631 #: src/slic3r/GUI/NotificationManager.cpp:748 msgid "Export G-Code." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:667 #: src/slic3r/GUI/NotificationManager.cpp:683 #: src/slic3r/GUI/NotificationManager.cpp:694 msgid "ERROR:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:672 #: src/slic3r/GUI/NotificationManager.cpp:687 #: src/slic3r/GUI/NotificationManager.cpp:702 msgid "WARNING:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:751 msgid "Slicing finished." msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:58 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:62 #: src/slic3r/GUI/ObjectDataViewModel.cpp:218 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3928 #: src/slic3r/GUI/Tab.cpp:4010 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 msgid "Range" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:259 #, possible-c-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:262 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:265 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw_renderer parameter." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:267 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:275 #, possible-c-format msgid "" "Unable to load the following shaders:\n" "%s" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:276 msgid "Error loading shaders" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:293 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:293 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:55 msgid "Delete this preset from this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:85 msgid "This printer will be shown in the presets list as" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:159 msgid "Physical Printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165 msgid "Type here the name of your printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176 msgid "Descriptive name for the printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180 msgid "Add preset for this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:209 src/slic3r/GUI/Tab.cpp:2024 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:284 msgid "Test" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:289 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:295 msgid "Success!" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:319 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:329 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:330 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:358 #: src/libslic3r/PrintConfig.cpp:113 msgid "HTTPS CA File" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:359 #, possible-c-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:360 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:464 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:468 msgid "You should to change a name of your printer device. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:476 msgid "Printer with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:477 msgid "Replace?" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:500 msgid "" "Next printer preset(s) is(are) duplicated:%1%Should I add it(they) just once " "for the printer \"%2%\" and close the Editing Dialog?" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:546 msgid "It's not possible to delete last related preset for the printer." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:547 msgid "Infornation" msgstr "" #: src/slic3r/GUI/Plater.cpp:167 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:168 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:169 msgid "Materials" msgstr "" #: src/slic3r/GUI/Plater.cpp:172 msgid "Manifold" msgstr "" #: src/slic3r/GUI/Plater.cpp:222 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:241 src/slic3r/GUI/Plater.cpp:1141 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1153 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:243 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:244 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:245 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:247 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:364 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:366 src/libslic3r/PrintConfig.cpp:2043 #: src/libslic3r/PrintConfig.cpp:2838 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:367 src/slic3r/GUI/Plater.cpp:490 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:368 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:400 src/slic3r/GUI/Tab.cpp:1446 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:402 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:410 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:504 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:506 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:507 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:690 msgid "Print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:691 src/slic3r/GUI/Tab.cpp:1770 #: src/slic3r/GUI/Tab.cpp:1771 msgid "Filament" msgstr "" #: src/slic3r/GUI/Plater.cpp:692 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:693 src/libslic3r/Preset.cpp:1303 msgid "SLA material" msgstr "" #: src/slic3r/GUI/Plater.cpp:694 msgid "Printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:753 src/slic3r/GUI/Plater.cpp:5707 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:754 msgid "Remove device" msgstr "" #: src/slic3r/GUI/Plater.cpp:767 src/slic3r/GUI/Plater.cpp:2921 #: src/slic3r/GUI/Plater.cpp:5237 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:916 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1061 #, possible-c-format msgid "%d (%d shells)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1066 #, possible-c-format msgid "Auto-repaired (%d errors)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1069 #, possible-c-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" #: src/slic3r/GUI/Plater.cpp:1079 msgid "Yes" msgstr "" #: src/slic3r/GUI/Plater.cpp:1100 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1103 msgid "object(s)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1103 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1141 msgid "Used Filament (in)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1143 src/slic3r/GUI/Plater.cpp:1160 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1143 src/slic3r/GUI/Plater.cpp:1160 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1153 msgid "Used Filament (in³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1158 src/libslic3r/PrintConfig.cpp:796 #: src/libslic3r/PrintConfig.cpp:2653 src/libslic3r/PrintConfig.cpp:2654 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1177 src/slic3r/GUI/Plater.cpp:1224 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1187 src/slic3r/GUI/Plater.cpp:1235 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1198 src/libslic3r/PrintConfig.cpp:618 msgid "Color" msgstr "" #: src/slic3r/GUI/Plater.cpp:1405 msgid "You can open only one .gcode file at a time." msgstr "" #: src/slic3r/GUI/Plater.cpp:1406 msgid "Drag and drop G-code file" msgstr "" #: src/slic3r/GUI/Plater.cpp:1436 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:1440 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:1555 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:1561 msgid "Import SLA archive" msgstr "" #: src/slic3r/GUI/Plater.cpp:2031 #, possible-c-format msgid "" "Unmounting successful. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:2034 #, possible-c-format msgid "Ejecting of device %s(%s) has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2056 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2143 msgid "Expand sidebar" msgstr "" #: src/slic3r/GUI/Plater.cpp:2216 msgid "Loading" msgstr "" #: src/slic3r/GUI/Plater.cpp:2226 msgid "Loading file" msgstr "" #: src/slic3r/GUI/Plater.cpp:2309 #, possible-c-format msgid "" "Some object(s) in file %s looks like saved in inches.\n" "Should I consider them as a saved in inches and convert them?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2311 msgid "Saved in inches object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2319 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should I consider\n" "this file as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2322 src/slic3r/GUI/Plater.cpp:2375 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2329 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2330 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2352 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2372 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2388 msgid "Loaded" msgstr "" #: src/slic3r/GUI/Plater.cpp:2490 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2491 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2553 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2560 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2566 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2572 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2673 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2684 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2763 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "" #: src/slic3r/GUI/Plater.cpp:2774 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:2906 src/slic3r/GUI/Plater.cpp:3583 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2915 msgid "Ready to slice" msgstr "" #: src/slic3r/GUI/Plater.cpp:2953 src/slic3r/GUI/PrintHostDialogs.cpp:232 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/Plater.cpp:2972 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3089 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3124 msgid "It is not allowed to change the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3124 msgid "Do you want to retry" msgstr "" #: src/slic3r/GUI/Plater.cpp:3142 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3233 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3238 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3257 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3278 msgid "Fix Throught NetFabb" msgstr "" #: src/slic3r/GUI/Plater.cpp:3543 msgid "There are active warnings concerning sliced models:\n" msgstr "" #: src/slic3r/GUI/Plater.cpp:3554 msgid "generated warnings" msgstr "" #: src/slic3r/GUI/Plater.cpp:3589 src/slic3r/GUI/PrintHostDialogs.cpp:233 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/Plater.cpp:3849 src/slic3r/GUI/Plater.cpp:3871 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3858 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3860 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3862 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:3862 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3881 msgid "Reload the selected object from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3884 msgid "Export the selected object as STL file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3915 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3915 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3917 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3917 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3919 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3919 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3922 msgid "Mirror" msgstr "" #: src/slic3r/GUI/Plater.cpp:3922 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3934 msgid "To objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3934 src/slic3r/GUI/Plater.cpp:3954 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3936 msgid "To parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:3936 src/slic3r/GUI/Plater.cpp:3972 msgid "Split the selected object into individual sub-parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:3939 src/slic3r/GUI/Plater.cpp:3954 #: src/slic3r/GUI/Plater.cpp:3972 src/libslic3r/PrintConfig.cpp:3670 msgid "Split" msgstr "" #: src/slic3r/GUI/Plater.cpp:3939 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3962 msgid "Optimize the rotation of the object for better print results." msgstr "" #: src/slic3r/GUI/Plater.cpp:4044 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4423 msgid "" "%1% printer was active at the time the target Undo / Redo snapshot was " "taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" #: src/slic3r/GUI/Plater.cpp:4627 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:4655 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4659 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4774 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:4782 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4790 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4824 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4855 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4856 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4860 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:4921 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:4975 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4975 msgid "Save SL1 file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5118 #, possible-c-format msgid "STL file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5135 #, possible-c-format msgid "AMF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5138 #, possible-c-format msgid "Error exporting AMF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5167 #, possible-c-format msgid "3MF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5172 #, possible-c-format msgid "Error exporting 3MF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5706 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:5803 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:24 src/slic3r/GUI/Tab.cpp:2058 #: src/slic3r/GUI/Tab.cpp:2240 src/slic3r/GUI/Tab.cpp:2348 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:52 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:54 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:64 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:66 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:72 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:74 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:83 msgid "" "If enabled, PrusaSlicer will check for the new versions of itself online. " "When a new version becomes available a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/Preferences.cpp:89 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:91 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:99 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:104 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:106 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:112 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:114 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:120 src/libslic3r/PrintConfig.cpp:3697 msgid "Single Instance" msgstr "" #: src/slic3r/GUI/Preferences.cpp:123 msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" #: src/slic3r/GUI/Preferences.cpp:125 msgid "" "If this is enabled, when staring PrusaSlicer and another instance of same " "PrusaSlicer is running, that instance will be reactivated instead." msgstr "" #: src/slic3r/GUI/Preferences.cpp:135 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:137 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:154 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:659 msgid "Ask for unsaved changes when closing application" msgstr "" #: src/slic3r/GUI/Preferences.cpp:156 msgid "Always ask for unsaved changes when closing application" msgstr "" #: src/slic3r/GUI/Preferences.cpp:161 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:660 msgid "Ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:163 msgid "Always ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:169 src/slic3r/GUI/Preferences.cpp:171 msgid "Show splash screen" msgstr "" #: src/slic3r/GUI/Preferences.cpp:178 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:184 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:186 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:191 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:193 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:200 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:213 msgid "Show sidebar collapse/expand button" msgstr "" #: src/slic3r/GUI/Preferences.cpp:215 msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " "right corner of the 3D Scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:220 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:222 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:230 msgid "Sequential slider applied only to top layer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:232 msgid "" "If enabled, changes made using the sequential slider, in preview, apply only " "to gcode top layer, if disabled, changes made using the sequential slider, " "in preview, apply to the whole gcode." msgstr "" #: src/slic3r/GUI/Preferences.cpp:255 msgid "Render" msgstr "" #: src/slic3r/GUI/Preferences.cpp:261 msgid "Use environment map" msgstr "" #: src/slic3r/GUI/Preferences.cpp:263 msgid "If enabled, renders object using the environment map." msgstr "" #: src/slic3r/GUI/Preferences.cpp:299 #, possible-c-format msgid "You need to restart %s to make the changes effective." msgstr "" #: src/slic3r/GUI/Preferences.cpp:376 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:391 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preferences.cpp:422 msgid "Old regular layout with the tab bar" msgstr "" #: src/slic3r/GUI/Preferences.cpp:423 msgid "New layout without the tab bar on the plater" msgstr "" #: src/slic3r/GUI/Preferences.cpp:424 msgid "Settings will be shown in the non-modal dialog" msgstr "" #: src/slic3r/GUI/Preferences.cpp:433 msgid "Settings layout mode" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:188 #: src/slic3r/GUI/PresetComboBoxes.cpp:226 #: src/slic3r/GUI/PresetComboBoxes.cpp:724 #: src/slic3r/GUI/PresetComboBoxes.cpp:774 #: src/slic3r/GUI/PresetComboBoxes.cpp:886 #: src/slic3r/GUI/PresetComboBoxes.cpp:930 msgid "System presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:230 #: src/slic3r/GUI/PresetComboBoxes.cpp:778 #: src/slic3r/GUI/PresetComboBoxes.cpp:934 msgid "User presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:241 msgid "Incompatible presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:566 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:622 #: src/slic3r/GUI/PresetComboBoxes.cpp:669 msgid "Add/Remove presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:627 #: src/slic3r/GUI/PresetComboBoxes.cpp:674 msgid "Add physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:641 msgid "Edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:645 msgid "Edit physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:652 msgid "Delete physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:658 msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:659 msgid "Delete Physical Printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:789 #: src/slic3r/GUI/PresetComboBoxes.cpp:948 msgid "Physical printers" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:813 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:815 #: src/slic3r/GUI/PresetComboBoxes.cpp:972 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:28 msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:35 msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:39 msgid "During the other layers, fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:41 msgid "Fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:47 msgid "will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:50 msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:52 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:54 msgid "will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:155 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:164 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:173 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:183 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:191 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:202 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:212 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:222 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:223 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:224 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:228 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:246 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:262 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:269 #, possible-c-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:273 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:302 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:315 msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:318 msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:321 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:334 msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:337 msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:340 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:35 msgid "Start printing after upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:42 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:147 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:148 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:149 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:150 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:151 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:152 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:155 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:157 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:198 #: src/slic3r/GUI/PrintHostDialogs.cpp:229 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:230 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:234 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:272 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:23 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83 #: src/libslic3r/PrintConfig.cpp:680 src/libslic3r/PrintConfig.cpp:724 #: src/libslic3r/PrintConfig.cpp:739 src/libslic3r/PrintConfig.cpp:2551 #: src/libslic3r/PrintConfig.cpp:2560 src/libslic3r/PrintConfig.cpp:2670 #: src/libslic3r/PrintConfig.cpp:2678 src/libslic3r/PrintConfig.cpp:2686 #: src/libslic3r/PrintConfig.cpp:2693 src/libslic3r/PrintConfig.cpp:2701 #: src/libslic3r/PrintConfig.cpp:2709 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:637 #: src/libslic3r/PrintConfig.cpp:1358 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:72 #, possible-c-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:125 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:131 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:137 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:142 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:148 msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:150 msgid "And selected preset is imcopatible with selected printer." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:151 msgid "Note: This preset will be replaced after saving" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:156 msgid "The empty name is not available." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:190 #: src/slic3r/GUI/SavePresetDialog.cpp:196 msgid "Save preset" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:219 msgctxt "PresetName" msgid "Copy" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:277 msgid "" "You have selected physical printer \"%1%\" \n" "with related printer preset \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:310 msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:313 msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:314 msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:315 msgid "Just switch to \"%1%\" preset" msgstr "" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2378 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2372 msgid "Normal" msgstr "" #: src/slic3r/GUI/Selection.cpp:191 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:232 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:264 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:283 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:301 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:320 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:421 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:447 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:988 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/Selection.cpp:1515 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:1515 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:90 src/slic3r/GUI/SysInfoDialog.cpp:92 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:177 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:101 src/libslic3r/PrintConfig.cpp:299 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:102 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:107 src/libslic3r/PrintConfig.cpp:314 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:108 msgid "Select the print profiles this profile is compatible with." msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:203 #, possible-c-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:204 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:210 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:214 msgid "Click to start a search or use %1% shortcut" msgstr "" #: src/slic3r/GUI/Tab.cpp:1224 msgid "Detach from system preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1237 msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1238 msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1241 msgid "Modifications to the current profile will be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:1244 msgid "" "This action is not revertable.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1246 msgid "Detach preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1272 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1274 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1276 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1278 msgid "Current preset is inherited from" msgstr "" #: src/slic3r/GUI/Tab.cpp:1282 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:1283 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:1284 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1288 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:1294 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:1302 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1305 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1319 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1323 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1331 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1332 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1370 src/slic3r/GUI/Tab.cpp:4008 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1375 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1386 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1387 src/libslic3r/PrintConfig.cpp:1895 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1391 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1402 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1426 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1438 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/Tab.cpp:1456 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1460 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1475 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1488 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1491 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1494 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1501 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1509 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1517 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1535 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1545 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1548 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1557 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1560 src/slic3r/GUI/Tab.cpp:4084 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1561 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1563 msgid "Extruder clearance (mm)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1568 src/slic3r/GUI/Tab.cpp:4085 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1575 src/libslic3r/PrintConfig.cpp:1561 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1581 src/slic3r/GUI/Tab.cpp:1582 #: src/slic3r/GUI/Tab.cpp:1887 src/slic3r/GUI/Tab.cpp:1888 #: src/slic3r/GUI/Tab.cpp:2221 src/slic3r/GUI/Tab.cpp:2222 #: src/slic3r/GUI/Tab.cpp:2297 src/slic3r/GUI/Tab.cpp:2298 #: src/slic3r/GUI/Tab.cpp:3951 src/slic3r/GUI/Tab.cpp:3952 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1588 src/slic3r/GUI/Tab.cpp:1895 #: src/slic3r/GUI/Tab.cpp:2228 src/slic3r/GUI/Tab.cpp:2304 #: src/slic3r/GUI/Tab.cpp:3959 src/slic3r/GUI/Tab.cpp:4090 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1589 src/slic3r/GUI/Tab.cpp:1896 #: src/slic3r/GUI/Tab.cpp:2229 src/slic3r/GUI/Tab.cpp:2305 #: src/slic3r/GUI/Tab.cpp:3960 src/slic3r/GUI/Tab.cpp:4091 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1669 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1779 msgid "Temperature" msgstr "" #: src/slic3r/GUI/Tab.cpp:1785 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1790 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1791 src/libslic3r/PrintConfig.cpp:1463 #: src/libslic3r/PrintConfig.cpp:2343 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1802 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1811 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1817 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1824 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1834 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1837 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1850 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1872 src/slic3r/GUI/Tab.cpp:2160 #: src/libslic3r/PrintConfig.cpp:1978 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1873 src/slic3r/GUI/Tab.cpp:2161 #: src/libslic3r/PrintConfig.cpp:1928 src/libslic3r/PrintConfig.cpp:1943 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1880 src/slic3r/GUI/Tab.cpp:2168 #: src/libslic3r/PrintConfig.cpp:419 src/libslic3r/PrintConfig.cpp:429 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1930 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:2026 msgid "" "Note: All parameters from this group are moved to the Physical Printer " "settings (see changelog).\n" "\n" "A new Physical Printer profile is created by clicking on the \"cog\" icon " "right of the Printer profiles combo box, by selecting the \"add or remove " "printers\" item in the Printer combo box. The Physical Printer profile " "editor opens also when clicking on the \"cog\" icon in the Printer settings " "tab. The Physical Printer profiles are being stored into PrusaSlicer/" "physical_printer directory." msgstr "" #: src/slic3r/GUI/Tab.cpp:2059 src/slic3r/GUI/Tab.cpp:2241 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2068 src/slic3r/GUI/UnsavedChangesDialog.cpp:1066 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:2073 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:2101 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2104 src/slic3r/GUI/Tab.cpp:2509 #: src/libslic3r/PrintConfig.cpp:1434 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:2175 src/libslic3r/PrintConfig.cpp:187 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2182 src/libslic3r/PrintConfig.cpp:1173 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2189 src/libslic3r/PrintConfig.cpp:2236 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2196 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2203 msgid "Color Change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2209 src/libslic3r/PrintConfig.cpp:1969 msgid "Pause Print G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2215 msgid "Template Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2248 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2263 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2264 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2270 src/slic3r/GUI/Tab.cpp:3935 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2287 src/slic3r/GUI/Tab.cpp:3931 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2346 src/slic3r/GUI/Tab.cpp:2442 #: src/libslic3r/PrintConfig.cpp:1202 src/libslic3r/PrintConfig.cpp:1237 #: src/libslic3r/PrintConfig.cpp:1254 src/libslic3r/PrintConfig.cpp:1271 #: src/libslic3r/PrintConfig.cpp:1287 src/libslic3r/PrintConfig.cpp:1297 #: src/libslic3r/PrintConfig.cpp:1307 src/libslic3r/PrintConfig.cpp:1317 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2371 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2377 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2386 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2391 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2398 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2403 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2467 src/slic3r/GUI/Tab.cpp:2475 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2476 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2507 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2531 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2536 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2542 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2555 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2564 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:2731 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2733 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:3323 msgid "Detached" msgstr "" #: src/slic3r/GUI/Tab.cpp:3386 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3386 msgid "delete" msgstr "" #: src/slic3r/GUI/Tab.cpp:3392 msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3404 msgid "Next physical printer(s) has/have selected preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3408 msgid "" "Note, that selected preset will be deleted from this/those printer(s) too." msgstr "" #: src/slic3r/GUI/Tab.cpp:3412 msgid "Next physical printer(s) has/have one and only selected preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3416 msgid "" "Note, that this/those printer(s) will be deleted after deleting of the " "selected preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3420 msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3425 msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3435 msgid "It's a last for this physical printer. We can't delete it" msgstr "" #: src/slic3r/GUI/Tab.cpp:3509 src/slic3r/GUI/Tab.cpp:3588 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:3660 msgid "" "Machine limits will be emitted to G-code and used to estimate print time." msgstr "" #: src/slic3r/GUI/Tab.cpp:3663 msgid "" "Machine limits will NOT be emitted to G-code, however they will be used to " "estimate print time, which may therefore not be accurate as the printer may " "apply a different set of machine limits." msgstr "" #: src/slic3r/GUI/Tab.cpp:3667 msgid "" "Machine limits are not set, therefore the print time estimate may not be " "accurate." msgstr "" #: src/slic3r/GUI/Tab.cpp:3689 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3691 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3693 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3695 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3700 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3702 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3705 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3707 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3717 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3719 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3722 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3725 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3727 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3733 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3734 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3740 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3741 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3894 src/slic3r/GUI/Tab.cpp:3896 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:4018 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:4023 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:4046 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:4051 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4125 msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" msgstr "" #: src/slic3r/GUI/Tab.cpp:4127 src/libslic3r/PrintConfig.cpp:2917 msgid "Object elevation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4127 src/libslic3r/PrintConfig.cpp:3019 msgid "Pad around object" msgstr "" #: src/slic3r/GUI/Tab.hpp:378 src/slic3r/GUI/Tab.hpp:502 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:409 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:453 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:486 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:137 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:146 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:845 msgid "Undef" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:525 msgid "Closing PrusaSlicer: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:542 msgid "Switching Presets: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:608 msgid "Old Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:609 msgid "New Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:640 msgid "Transfer" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:641 msgid "Discard" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:642 msgid "Save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:662 msgid "PrusaSlicer will remember your action." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:664 msgid "" "You will not be asked about the unsaved changes the next time you close " "PrusaSlicer." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:665 msgid "" "You will not be asked about the unsaved changes the next time you switch a " "preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:666 msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to be asked about unsaved changes again." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:668 msgid "PrusaSlicer: Don't ask me again" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:735 msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:737 msgid "All modified options will be reverted." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:740 msgid "Save the selected options." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:740 msgid "Transfer the selected options to the newly selected presets." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:744 msgid "Save the selected options to preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:745 msgid "Transfer the selected options to the newly selected preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1004 msgid "The following presets were modified:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1009 msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1013 msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1014 msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1061 msgid "Extruders count" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1177 msgid "Old value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1178 msgid "New value" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:43 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:53 msgid "Changelog && Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125 #: src/slic3r/GUI/UpdateDialogs.cpp:183 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:71 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:92 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:151 #, possible-c-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:211 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:216 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:225 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:230 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:249 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:270 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:287 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:309 #, possible-c-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:15 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:41 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:83 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:85 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:89 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:91 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:142 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:254 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:255 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:263 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:264 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:276 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:285 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:286 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:365 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:623 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:624 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:84 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:90 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:92 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:49 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:55 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:139 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:133 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:136 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:219 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:235 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:242 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:248 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:251 #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:263 #: src/slic3r/Utils/FixModelByWin10.cpp:270 #: src/slic3r/Utils/FixModelByWin10.cpp:302 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:340 msgid "Model fixing" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:341 msgid "Exporting model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:368 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:383 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:385 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:387 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:391 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:406 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 msgid "Model repaired successfully" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model Repair by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model repair failed:" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:74 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:76 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:83 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:89 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:91 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:185 msgid "Connection to Prusa SL1 works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:191 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:726 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:730 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:733 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/Http.cpp:73 msgid "" "Could not detect system SSL certificate store. PrusaSlicer will be unable to " "establish secure network connections." msgstr "" #: src/slic3r/Utils/Http.cpp:78 msgid "PrusaSlicer detected system SSL certificate store in: %1%" msgstr "" #: src/slic3r/Utils/Http.cpp:82 msgid "" "To specify the system certificate store manually, please set the %1% " "environment variable to the correct CA bundle and restart the application." msgstr "" #: src/slic3r/Utils/Http.cpp:91 msgid "" "CURL init has failed. PrusaSlicer will be unable to establish network " "connections. See logs for additional details." msgstr "" #: src/slic3r/Utils/Process.cpp:151 msgid "Open G-code file:" msgstr "" #: src/libslic3r/GCode.cpp:604 msgid "There is an object with no extrusions on the first layer." msgstr "" #: src/libslic3r/GCode.cpp:622 msgid "Empty layers detected, the output would not be printable." msgstr "" #: src/libslic3r/GCode.cpp:623 msgid "Print z" msgstr "" #: src/libslic3r/GCode.cpp:624 msgid "" "This is usually caused by negligibly small extrusions or by a faulty model. " "Try to repair the model or change its orientation on the bed." msgstr "" #: src/libslic3r/ExtrusionEntity.cpp:328 src/libslic3r/ExtrusionEntity.cpp:364 msgid "Mixed" msgstr "" #: src/libslic3r/Flow.cpp:61 msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1667 msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:955 msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/miniz_extension.cpp:91 msgid "undefined error" msgstr "" #: src/libslic3r/miniz_extension.cpp:93 msgid "too many files" msgstr "" #: src/libslic3r/miniz_extension.cpp:95 msgid "file too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:97 msgid "unsupported method" msgstr "" #: src/libslic3r/miniz_extension.cpp:99 msgid "unsupported encryption" msgstr "" #: src/libslic3r/miniz_extension.cpp:101 msgid "unsupported feature" msgstr "" #: src/libslic3r/miniz_extension.cpp:103 msgid "failed finding central directory" msgstr "" #: src/libslic3r/miniz_extension.cpp:105 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:107 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:109 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:111 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:113 msgid "compression failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:115 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/miniz_extension.cpp:117 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:119 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/miniz_extension.cpp:121 msgid "allocation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:123 msgid "file open failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:125 msgid "file create failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:127 msgid "file write failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:129 msgid "file read failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:131 msgid "file close failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:133 msgid "file seek failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:135 msgid "file stat failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:137 msgid "invalid parameter" msgstr "" #: src/libslic3r/miniz_extension.cpp:139 msgid "invalid filename" msgstr "" #: src/libslic3r/miniz_extension.cpp:141 msgid "buffer too small" msgstr "" #: src/libslic3r/miniz_extension.cpp:143 msgid "internal error" msgstr "" #: src/libslic3r/miniz_extension.cpp:145 msgid "file not found" msgstr "" #: src/libslic3r/miniz_extension.cpp:147 msgid "archive is too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:149 msgid "validation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:151 msgid "write calledback failed" msgstr "" #: src/libslic3r/Preset.cpp:1301 msgid "filament" msgstr "" #: src/libslic3r/Preset.cpp:1302 msgid "SLA print" msgstr "" #: src/libslic3r/Print.cpp:1245 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:1248 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:1252 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:1254 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:1263 msgid "The Spiral Vase option can only be used when printing a single object." msgstr "" #: src/libslic3r/Print.cpp:1270 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:1283 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:1288 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " "and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:1290 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:1292 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" #: src/libslic3r/Print.cpp:1294 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:1296 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:1317 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:1319 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:1321 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:1323 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:1365 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:1391 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:1400 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1403 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1414 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:1422 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:1426 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:1448 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1453 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1610 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:1636 msgid "Generating skirt" msgstr "" #: src/libslic3r/Print.cpp:1645 msgid "Generating brim" msgstr "" #: src/libslic3r/Print.cpp:1676 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:1680 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLA/Pad.cpp:532 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/SLAPrint.cpp:627 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:639 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:645 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:660 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:667 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:780 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:44 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:45 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:46 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:359 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:48 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:50 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:65 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:66 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:192 msgid "Too many overlapping holes." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:201 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:247 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:411 src/libslic3r/SLAPrintSteps.cpp:420 #: src/libslic3r/SLAPrintSteps.cpp:459 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:451 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:619 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:72 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:51 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:56 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:61 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:66 msgid "Picture sizes to be stored into a .gcode and .sl1 files" msgstr "" #: src/libslic3r/PrintConfig.cpp:73 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:80 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:81 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:89 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:91 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:99 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:100 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance." msgstr "" #: src/libslic3r/PrintConfig.cpp:106 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:107 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:114 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:120 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:122 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:138 msgid "Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:144 msgid "Printer preset name" msgstr "" #: src/libslic3r/PrintConfig.cpp:145 msgid "Related printer preset name" msgstr "" #: src/libslic3r/PrintConfig.cpp:150 msgid "Authorization Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:169 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:170 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:177 src/libslic3r/PrintConfig.cpp:2206 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:178 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:181 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:188 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:198 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:199 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:210 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:211 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:219 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:221 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:227 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:228 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:230 src/libslic3r/PrintConfig.cpp:373 #: src/libslic3r/PrintConfig.cpp:902 src/libslic3r/PrintConfig.cpp:1028 #: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1309 #: src/libslic3r/PrintConfig.cpp:1319 src/libslic3r/PrintConfig.cpp:1511 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:236 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:238 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:241 src/libslic3r/PrintConfig.cpp:816 #: src/libslic3r/PrintConfig.cpp:1748 src/libslic3r/PrintConfig.cpp:1758 #: src/libslic3r/PrintConfig.cpp:2036 src/libslic3r/PrintConfig.cpp:2191 #: src/libslic3r/PrintConfig.cpp:2390 src/libslic3r/PrintConfig.cpp:2891 #: src/libslic3r/PrintConfig.cpp:3012 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:247 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:248 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:249 src/libslic3r/PrintConfig.cpp:828 #: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:1327 #: src/libslic3r/PrintConfig.cpp:1390 src/libslic3r/PrintConfig.cpp:1640 #: src/libslic3r/PrintConfig.cpp:2568 src/libslic3r/PrintConfig.cpp:2805 #: src/libslic3r/PrintConfig.cpp:2931 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:256 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:258 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:268 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:270 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:271 src/libslic3r/PrintConfig.cpp:645 #: src/libslic3r/PrintConfig.cpp:653 src/libslic3r/PrintConfig.cpp:662 #: src/libslic3r/PrintConfig.cpp:670 src/libslic3r/PrintConfig.cpp:697 #: src/libslic3r/PrintConfig.cpp:716 src/libslic3r/PrintConfig.cpp:966 #: src/libslic3r/PrintConfig.cpp:1094 src/libslic3r/PrintConfig.cpp:1167 #: src/libslic3r/PrintConfig.cpp:1243 src/libslic3r/PrintConfig.cpp:1277 #: src/libslic3r/PrintConfig.cpp:1289 src/libslic3r/PrintConfig.cpp:1299 #: src/libslic3r/PrintConfig.cpp:1349 src/libslic3r/PrintConfig.cpp:1408 #: src/libslic3r/PrintConfig.cpp:1541 src/libslic3r/PrintConfig.cpp:1715 #: src/libslic3r/PrintConfig.cpp:1724 src/libslic3r/PrintConfig.cpp:2170 #: src/libslic3r/PrintConfig.cpp:2297 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:278 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:279 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:286 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:287 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:294 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:295 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:305 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:306 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:320 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:321 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:338 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:339 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:347 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:348 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:353 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:354 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:361 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:362 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:370 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:379 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:380 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:386 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:387 src/libslic3r/PrintConfig.cpp:2735 #: src/libslic3r/PrintConfig.cpp:2746 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:393 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:394 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:403 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:405 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:411 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:412 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:420 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:430 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:441 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:443 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:449 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:451 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:460 src/libslic3r/PrintConfig.cpp:881 #: src/libslic3r/PrintConfig.cpp:2151 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:461 msgid "Monotonic" msgstr "" #: src/libslic3r/PrintConfig.cpp:462 src/libslic3r/PrintConfig.cpp:887 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:463 src/libslic3r/PrintConfig.cpp:891 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:464 src/libslic3r/PrintConfig.cpp:892 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:465 src/libslic3r/PrintConfig.cpp:893 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:471 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:473 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:482 src/libslic3r/PrintConfig.cpp:493 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:484 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:487 src/libslic3r/PrintConfig.cpp:596 #: src/libslic3r/PrintConfig.cpp:924 src/libslic3r/PrintConfig.cpp:937 #: src/libslic3r/PrintConfig.cpp:1059 src/libslic3r/PrintConfig.cpp:1085 #: src/libslic3r/PrintConfig.cpp:1531 src/libslic3r/PrintConfig.cpp:1876 #: src/libslic3r/PrintConfig.cpp:2025 src/libslic3r/PrintConfig.cpp:2093 #: src/libslic3r/PrintConfig.cpp:2254 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:495 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:498 src/libslic3r/PrintConfig.cpp:946 #: src/libslic3r/PrintConfig.cpp:1835 src/libslic3r/PrintConfig.cpp:1887 #: src/libslic3r/PrintConfig.cpp:2137 src/libslic3r/PrintConfig.cpp:2267 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:505 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:507 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:513 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:515 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:525 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:537 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:548 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:558 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:559 src/libslic3r/PrintConfig.cpp:619 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:565 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:566 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:575 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:576 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:581 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:582 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:590 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:592 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:602 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:603 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:608 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:609 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:611 src/libslic3r/PrintConfig.cpp:1823 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:624 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:625 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:633 src/libslic3r/PrintConfig.cpp:1355 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:634 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:643 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:644 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:651 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:652 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:659 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:660 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:668 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:669 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:676 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:677 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:686 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:687 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:695 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:696 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:703 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:704 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:708 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:714 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:715 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:722 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:723 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:730 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:731 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:737 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:738 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:746 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:753 src/libslic3r/PrintConfig.cpp:2646 #: src/libslic3r/PrintConfig.cpp:2647 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:754 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:757 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:762 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:763 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:790 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:791 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:797 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:798 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:807 src/libslic3r/PrintConfig.cpp:2730 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:811 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:813 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:825 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:827 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:862 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:864 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:882 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:883 msgid "Triangles" msgstr "" #: src/libslic3r/PrintConfig.cpp:884 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:885 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:886 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:888 src/libslic3r/PrintConfig.cpp:2153 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:889 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:890 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:894 msgid "Adaptive Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:895 msgid "Support Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:899 src/libslic3r/PrintConfig.cpp:908 #: src/libslic3r/PrintConfig.cpp:918 src/libslic3r/PrintConfig.cpp:952 msgid "First layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:900 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:909 msgid "First layer bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:910 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:920 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:933 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates. This can be expressed as an absolute value or as a percentage (for " "example: 150%) over the default layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:942 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:943 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:953 msgid "First layer extruder temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:954 msgid "" "Extruder temperature for first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output file." msgstr "" #: src/libslic3r/PrintConfig.cpp:964 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:972 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:973 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:980 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:981 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:1004 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:1009 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:1010 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1017 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1018 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:1026 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1034 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1036 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:1039 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1045 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1047 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1055 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1065 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1066 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1071 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1073 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1080 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1082 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1093 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1101 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1102 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1115 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1116 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1124 msgid "Enable ironing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1125 msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1131 src/libslic3r/PrintConfig.cpp:1133 msgid "Ironing Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1145 msgid "Flow rate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1147 msgid "Percent of a flow rate relative to object's normal layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1155 msgid "Spacing between ironing passes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1157 msgid "Distance between ironing lines" msgstr "" #: src/libslic3r/PrintConfig.cpp:1164 src/libslic3r/PrintConfig.cpp:1166 msgid "Ironing speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1174 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1185 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1186 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1194 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1195 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1200 msgid "How to apply" msgstr "" #: src/libslic3r/PrintConfig.cpp:1201 msgid "Purpose of Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1203 msgid "How to apply the Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1233 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1234 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1235 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1236 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1239 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1240 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1241 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1242 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1250 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1251 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1252 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1253 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1256 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1257 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1258 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1259 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1267 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1268 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1269 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1270 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1273 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1274 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1275 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1276 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1286 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1288 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1296 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1298 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1306 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1308 msgid "Maximum acceleration when extruding (M204 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1316 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1318 msgid "Maximum acceleration when retracting (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1325 src/libslic3r/PrintConfig.cpp:1334 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1326 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1335 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1345 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1346 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1356 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1365 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1366 src/libslic3r/PrintConfig.cpp:1377 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1370 src/libslic3r/PrintConfig.cpp:1381 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1376 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1388 src/libslic3r/PrintConfig.cpp:1397 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1389 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1398 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1406 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1407 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1414 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1415 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1424 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1425 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1435 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1440 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1441 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1456 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1457 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1464 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1471 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1472 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1481 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1483 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1489 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1490 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1498 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1499 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1507 src/libslic3r/PrintConfig.cpp:1525 #: src/libslic3r/PrintConfig.cpp:1538 src/libslic3r/PrintConfig.cpp:1548 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1508 msgid "" "This is the acceleration your printer will use for perimeters. A high value " "like 9000 usually gives good results if your hardware is up to the job. Set " "zero to disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1516 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1518 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1527 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1540 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1550 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1554 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1562 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1574 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1575 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1580 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1581 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:1589 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1590 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:1595 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:1596 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1609 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1611 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:1619 msgid "Resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:1620 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:1630 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1631 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:1637 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:1638 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1645 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1646 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:1651 src/libslic3r/PrintConfig.cpp:1659 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1652 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1653 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1655 src/libslic3r/PrintConfig.cpp:1664 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1660 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1661 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1669 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1670 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:1677 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1678 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:1679 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1686 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1687 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1688 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1696 src/libslic3r/PrintConfig.cpp:1704 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:1697 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1705 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:1712 src/libslic3r/PrintConfig.cpp:1713 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1714 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1720 src/libslic3r/PrintConfig.cpp:1721 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1722 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:1729 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1731 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:1737 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:1738 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:1739 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:1747 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1749 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:1750 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1757 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1759 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1760 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1769 msgid "Serial port" msgstr "" #: src/libslic3r/PrintConfig.cpp:1770 msgid "USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1777 msgid "Serial port speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1778 msgid "Speed (baud) of USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1787 msgid "Distance from object" msgstr "" #: src/libslic3r/PrintConfig.cpp:1788 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" #: src/libslic3r/PrintConfig.cpp:1795 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:1796 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "" #: src/libslic3r/PrintConfig.cpp:1803 msgid "Draft shield" msgstr "" #: src/libslic3r/PrintConfig.cpp:1804 msgid "" "If enabled, the skirt will be as tall as a highest printed object. This is " "useful to protect an ABS or ASA print from warping and detaching from print " "bed due to wind draft." msgstr "" #: src/libslic3r/PrintConfig.cpp:1810 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1811 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1812 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:1820 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1821 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:1830 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1832 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1842 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:1844 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:1845 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1851 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1853 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1859 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1861 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1873 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1884 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1896 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:1902 src/libslic3r/PrintConfig.cpp:1903 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:1909 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:1910 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than an object." msgstr "" #: src/libslic3r/PrintConfig.cpp:1918 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:1919 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:1929 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:1944 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:1960 msgid "Color change G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1961 msgid "This G-code will be used as a code for the color change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1970 msgid "This G-code will be used as a code for the pause print" msgstr "" #: src/libslic3r/PrintConfig.cpp:1979 msgid "This G-code will be used as a custom code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1987 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1988 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:1993 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:1994 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1999 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2000 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2007 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2009 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2013 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2015 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:2021 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2023 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:2033 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2035 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:2045 src/libslic3r/PrintConfig.cpp:2840 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2051 msgid "Contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2053 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2060 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2061 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2066 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:2068 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:2073 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2079 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2081 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2090 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2099 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2101 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2106 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2108 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:2115 msgid "Interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2117 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2124 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2126 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2135 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2144 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2146 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2152 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2158 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2160 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2169 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2176 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2178 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2184 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2186 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2198 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2200 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2207 msgid "" "Extruder temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:2210 msgid "Extruder temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2216 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2218 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2224 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2225 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2237 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {previous_extruder} and " "{next_extruder} can be used. When a tool-changing command which changes to " "the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2250 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2262 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2277 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2278 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2286 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2289 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2296 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2304 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2305 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2311 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2312 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2318 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2319 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2329 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2330 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2336 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2337 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2344 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2350 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2351 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2357 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2358 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2367 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2368 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2374 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2375 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2382 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2388 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2389 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2396 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2397 msgid "" "Purging after toolchange will done inside this object's infills. This lowers " "the amount of waste but may result in longer print time due to additional " "travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2404 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2405 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:2411 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2412 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:2418 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2420 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:2428 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:2429 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2496 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2497 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2502 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2503 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2508 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:2510 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2516 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2521 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2522 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:2523 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2528 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2529 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:2530 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2535 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2536 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:2542 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:2543 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:2548 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:2549 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2550 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2557 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:2558 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2559 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2566 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2567 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2574 src/libslic3r/PrintConfig.cpp:2575 #: src/libslic3r/PrintConfig.cpp:2576 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2582 src/libslic3r/PrintConfig.cpp:2583 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2584 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:2590 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2592 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2599 src/libslic3r/PrintConfig.cpp:2600 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2601 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:2613 src/libslic3r/PrintConfig.cpp:2614 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:2625 src/libslic3r/PrintConfig.cpp:2626 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2632 src/libslic3r/PrintConfig.cpp:2633 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:2634 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2639 src/libslic3r/PrintConfig.cpp:2640 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:2641 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:2648 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2655 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2660 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2661 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2668 src/libslic3r/PrintConfig.cpp:2669 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2676 src/libslic3r/PrintConfig.cpp:2677 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2684 src/libslic3r/PrintConfig.cpp:2685 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2691 src/libslic3r/PrintConfig.cpp:2692 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2699 src/libslic3r/PrintConfig.cpp:2700 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2707 src/libslic3r/PrintConfig.cpp:2708 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2714 src/libslic3r/PrintConfig.cpp:2715 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2721 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2722 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2734 src/libslic3r/PrintConfig.cpp:2745 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:2756 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2758 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:2763 msgid "Pinhead front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2765 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:2772 msgid "Head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2774 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:2781 msgid "Pinhead width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2783 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:2791 msgid "Pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2793 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:2801 msgid "Small pillar diameter percent" msgstr "" #: src/libslic3r/PrintConfig.cpp:2803 msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" #: src/libslic3r/PrintConfig.cpp:2812 msgid "Max bridges on a pillar" msgstr "" #: src/libslic3r/PrintConfig.cpp:2814 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" #: src/libslic3r/PrintConfig.cpp:2822 msgid "Pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2823 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:2831 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:2832 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:2833 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:2845 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2847 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:2856 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2858 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:2866 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2868 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:2875 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2878 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2888 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2890 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:2898 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2900 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:2907 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2909 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:2919 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:2930 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:2936 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:2938 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2944 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:2946 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:2951 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2953 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2961 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2962 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:2975 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:2976 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:2986 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2988 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3008 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:3010 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3021 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3026 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3028 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3033 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:3035 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:3044 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:3046 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3053 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3055 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3062 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3065 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:3072 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:3074 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:3079 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3081 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:3091 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:3101 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:3513 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:3514 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:3525 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:3526 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:3531 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3532 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3536 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3537 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3541 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:3542 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:3547 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:3552 msgid "G-code viewer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3553 msgid "Visualize an already sliced and saved G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:3558 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:3559 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:3564 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:3565 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:3570 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3571 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3575 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3576 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3580 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:3581 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:3585 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3586 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:3596 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:3597 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:3602 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:3623 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3624 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:3628 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:3629 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:3632 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:3633 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:3637 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:3638 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:3642 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:3647 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3651 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3655 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3656 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3660 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3661 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3666 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3671 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:3674 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:3675 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:3684 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:3685 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:3688 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3689 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:3692 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:3693 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3698 msgid "" "If enabled, the command line arguments are sent to an existing instance of " "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides " "the \"single_instance\" configuration value from application preferences." msgstr "" #: src/libslic3r/PrintConfig.cpp:3709 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:3710 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3713 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:3714 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:3720 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3721 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/Zipper.cpp:27 msgid "Error with zip archive" msgstr "" #: src/libslic3r/PrintObject.cpp:114 msgid "Processing triangulated mesh" msgstr "" #: src/libslic3r/PrintObject.cpp:158 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:261 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:422 msgid "Generating support material" msgstr ""