#!/usr/bin/env perl use strict; use warnings; BEGIN { use FindBin; use lib "$FindBin::Bin/lib"; } use Getopt::Long qw(:config no_auto_abbrev); use List::Util qw(first); use POSIX qw(setlocale LC_NUMERIC); use Slic3r; use Time::HiRes qw(gettimeofday tv_interval); $|++; our %opt = (); my %cli_options = (); { my %options = ( 'help' => sub { usage() }, 'version' => sub { print "$Slic3r::VERSION\n"; exit 0 }, 'debug' => \$Slic3r::debug, 'gui' => \$opt{gui}, 'o|output=s' => \$opt{output}, 'save=s' => \$opt{save}, 'load=s@' => \$opt{load}, 'autosave=s' => \$opt{autosave}, 'ignore-nonexistent-config' => \$opt{ignore_nonexistent_config}, 'no-plater' => \$opt{no_plater}, 'gui-mode=s' => \$opt{gui_mode}, 'datadir=s' => \$opt{datadir}, 'export-svg' => \$opt{export_svg}, 'merge|m' => \$opt{merge}, 'repair' => \$opt{repair}, 'cut=f' => \$opt{cut}, 'info' => \$opt{info}, 'scale=f' => \$opt{scale}, 'rotate=i' => \$opt{rotate}, 'duplicate=i' => \$opt{duplicate}, 'duplicate-grid=s' => \$opt{duplicate_grid}, ); foreach my $opt_key (keys %{$Slic3r::Config::Options}) { my $cli = $Slic3r::Config::Options->{$opt_key}->{cli} or next; # allow both the dash-separated option name and the full opt_key $options{ "$opt_key|$cli" } = \$cli_options{$opt_key}; } GetOptions(%options) or usage(1); } # process command line options my $cli_config = Slic3r::Config->new_from_cli(%cli_options); # load configuration files my @external_configs = (); if ($opt{load}) { foreach my $configfile (@{$opt{load}}) { if (-e $configfile) { push @external_configs, Slic3r::Config->load($configfile); } elsif (-e "$FindBin::Bin/$configfile") { printf STDERR "Loading $FindBin::Bin/$configfile\n"; push @external_configs, Slic3r::Config->load("$FindBin::Bin/$configfile"); } else { $opt{ignore_nonexistent_config} or die "Cannot find specified configuration file ($configfile).\n"; } } } # merge configuration my $config = Slic3r::Config->new_from_defaults; foreach my $c (@external_configs, $cli_config) { $c->normalize; # expand shortcuts before applying, otherwise destination values would be already filled with defaults $config->apply($c); } # save configuration if ($opt{save}) { $config->validate; $config->save($opt{save}); } # launch GUI my $gui; if (!@ARGV && !$opt{save} && eval "require Slic3r::GUI; 1") { { no warnings 'once'; $Slic3r::GUI::datadir = $opt{datadir}; $Slic3r::GUI::no_plater = $opt{no_plater}; $Slic3r::GUI::mode = $opt{gui_mode}; $Slic3r::GUI::autosave = $opt{autosave}; } $gui = Slic3r::GUI->new; setlocale(LC_NUMERIC, 'C'); $gui->{skeinpanel}->load_config_file($_) for @{$opt{load}}; $gui->{skeinpanel}->load_config($cli_config); $gui->MainLoop; exit; } die $@ if $@ && $opt{gui}; if (@ARGV) { # slicing from command line $config->validate; if ($opt{repair}) { foreach my $file (@ARGV) { die "Repair is currently supported only on STL files\n" if $file !~ /\.stl$/i; my $output_file = $file; $output_file =~ s/\.(stl)$/_fixed.obj/i; my $tmesh = Slic3r::TriangleMesh->new; $tmesh->ReadSTLFile($file); $tmesh->repair; $tmesh->WriteOBJFile($output_file); } exit; } if ($opt{cut}) { foreach my $file (@ARGV) { my $model = Slic3r::Model->read_from_file($file); $model->add_default_instances; my $mesh = $model->mesh; $mesh->translate(0, 0, -$mesh->bounding_box->z_min); my $upper = Slic3r::TriangleMesh->new; my $lower = Slic3r::TriangleMesh->new; $mesh->cut($opt{cut}, $upper, $lower); $upper->repair; $lower->repair; $upper->write_ascii("${file}_upper.stl") if $upper->facets_count > 0; $lower->write_ascii("${file}_lower.stl") if $lower->facets_count > 0; } exit; } while (my $input_file = shift @ARGV) { my $model; if ($opt{merge}) { my @models = map Slic3r::Model->read_from_file($_), $input_file, (splice @ARGV, 0); $model = Slic3r::Model->merge(@models); } else { $model = Slic3r::Model->read_from_file($input_file); } if ($opt{info}) { $model->print_info; next; } if (defined $opt{duplicate_grid}) { $opt{duplicate_grid} = [ split /[,x]/, $opt{duplicate_grid}, 2 ]; } my $sprint = Slic3r::Print::Simple->new( scale => $opt{scale} // 1, rotate => $opt{rotate} // 0, duplicate => $opt{duplicate} // 1, duplicate_grid => $opt{duplicate_grid} // [1,1], status_cb => sub { my ($percent, $message) = @_; printf "=> %s\n", $message; }, output_file => $opt{output}, ); $sprint->apply_config($config); $sprint->set_model($model); if ($opt{export_svg}) { $sprint->export_svg; } else { my $t0 = [gettimeofday]; $sprint->export_gcode; # output some statistics { my $duration = tv_interval($t0); printf "Done. Process took %d minutes and %.3f seconds\n", int($duration/60), ($duration - int($duration/60)*60); # % truncates to integer } printf "Filament required: %.1fmm (%.1fcm3)\n", $sprint->total_used_filament, $sprint->total_extruded_volume/1000; } } } else { usage(1) unless $opt{save}; } sub usage { my ($exit_code) = @_; my $config = Slic3r::Config->new_from_defaults->as_hash; my $j = ''; if ($Slic3r::have_threads) { $j = <<"EOF"; -j, --threads Number of threads to use (1+, default: $config->{threads}) EOF } print <<"EOF"; Slic3r $Slic3r::VERSION is a STL-to-GCODE translator for RepRap 3D printers written by Alessandro Ranellucci - http://slic3r.org/ Usage: slic3r.pl [ OPTIONS ] [ file.stl ] [ file2.stl ] ... --help Output this usage screen and exit --version Output the version of Slic3r and exit --save Save configuration to the specified file --load Load configuration from the specified file. It can be used more than once to load options from multiple files. -o, --output File to output gcode to (by default, the file will be saved into the same directory as the input file using the --output-filename-format to generate the filename.) If a directory is specified for this option, the output will be saved under that directory, and the filename will be generated by --output-filename-format. Non-slicing actions (no G-code will be generated): --repair Repair given STL files and save them as _fixed.obj --cut Cut given input files at given Z (relative) and export them as _upper.stl and _lower.stl --info Output information about the supplied file(s) and exit $j GUI options: --no-plater Disable the plater tab --gui-mode Overrides the configured mode (simple/expert) --autosave Automatically export current configuration to the specified file Output options: --output-filename-format Output file name format; all config options enclosed in brackets will be replaced by their values, as well as [input_filename_base] and [input_filename] (default: $config->{output_filename_format}) --post-process Generated G-code will be processed with the supplied script; call this more than once to process through multiple scripts. --export-svg Export a SVG file containing slices instead of G-code. -m, --merge If multiple files are supplied, they will be composed into a single print rather than processed individually. Printer options: --nozzle-diameter Diameter of nozzle in mm (default: $config->{nozzle_diameter}->[0]) --print-center Coordinates in mm of the point to center the print around (default: $config->{print_center}->[0],$config->{print_center}->[1]) --z-offset Additional height in mm to add to vertical coordinates (+/-, default: $config->{z_offset}) --gcode-flavor The type of G-code to generate (reprap/teacup/makerware/sailfish/mach3/no-extrusion, default: $config->{gcode_flavor}) --use-relative-e-distances Enable this to get relative E values (default: no) --use-firmware-retraction Enable firmware-controlled retraction using G10/G11 (default: no) --gcode-arcs Use G2/G3 commands for native arcs (experimental, not supported by all firmwares) --g0 Use G0 commands for retraction (experimental, not supported by all firmwares) --gcode-comments Make G-code verbose by adding comments (default: no) --vibration-limit Limit the frequency of moves on X and Y axes (Hz, set zero to disable; default: $config->{vibration_limit}) Filament options: --filament-diameter Diameter in mm of your raw filament (default: $config->{filament_diameter}->[0]) --extrusion-multiplier Change this to alter the amount of plastic extruded. There should be very little need to change this value, which is only useful to compensate for filament packing (default: $config->{extrusion_multiplier}->[0]) --temperature Extrusion temperature in degree Celsius, set 0 to disable (default: $config->{temperature}->[0]) --first-layer-temperature Extrusion temperature for the first layer, in degree Celsius, set 0 to disable (default: same as --temperature) --bed-temperature Heated bed temperature in degree Celsius, set 0 to disable (default: $config->{bed_temperature}) --first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius, set 0 to disable (default: same as --bed-temperature) Speed options: --travel-speed Speed of non-print moves in mm/s (default: $config->{travel_speed}) --perimeter-speed Speed of print moves for perimeters in mm/s (default: $config->{perimeter_speed}) --small-perimeter-speed Speed of print moves for small perimeters in mm/s or % over perimeter speed (default: $config->{small_perimeter_speed}) --external-perimeter-speed Speed of print moves for the external perimeter in mm/s or % over perimeter speed (default: $config->{external_perimeter_speed}) --infill-speed Speed of print moves in mm/s (default: $config->{infill_speed}) --solid-infill-speed Speed of print moves for solid surfaces in mm/s or % over infill speed (default: $config->{solid_infill_speed}) --top-solid-infill-speed Speed of print moves for top surfaces in mm/s or % over solid infill speed (default: $config->{top_solid_infill_speed}) --support-material-speed Speed of support material print moves in mm/s (default: $config->{support_material_speed}) --bridge-speed Speed of bridge print moves in mm/s (default: $config->{bridge_speed}) --gap-fill-speed Speed of gap fill print moves in mm/s (default: $config->{gap_fill_speed}) --first-layer-speed Speed of print moves for bottom layer, expressed either as an absolute value or as a percentage over normal speeds (default: $config->{first_layer_speed}) Acceleration options: --perimeter-acceleration Overrides firmware's default acceleration for perimeters. (mm/s^2, set zero to disable; default: $config->{perimeter_acceleration}) --infill-acceleration Overrides firmware's default acceleration for infill. (mm/s^2, set zero to disable; default: $config->{infill_acceleration}) --bridge-acceleration Overrides firmware's default acceleration for bridges. (mm/s^2, set zero to disable; default: $config->{bridge_acceleration}) --first-layer-acceleration Overrides firmware's default acceleration for first layer. (mm/s^2, set zero to disable; default: $config->{first_layer_acceleration}) --default-acceleration Acceleration will be reset to this value after the specific settings above have been applied. (mm/s^2, set zero to disable; default: $config->{travel_speed}) Accuracy options: --layer-height Layer height in mm (default: $config->{layer_height}) --first-layer-height Layer height for first layer (mm or %, default: $config->{first_layer_height}) --infill-every-layers Infill every N layers (default: $config->{infill_every_layers}) --solid-infill-every-layers Force a solid layer every N layers (default: $config->{solid_infill_every_layers}) Print options: --perimeters Number of perimeters/horizontal skins (range: 0+, default: $config->{perimeters}) --top-solid-layers Number of solid layers to do for top surfaces (range: 0+, default: $config->{top_solid_layers}) --bottom-solid-layers Number of solid layers to do for bottom surfaces (range: 0+, default: $config->{bottom_solid_layers}) --solid-layers Shortcut for setting the two options above at once --fill-density Infill density (range: 0%-100%, default: $config->{fill_density}%) --fill-angle Infill angle in degrees (range: 0-90, default: $config->{fill_angle}) --fill-pattern Pattern to use to fill non-solid layers (default: $config->{fill_pattern}) --solid-fill-pattern Pattern to use to fill solid layers (default: $config->{solid_fill_pattern}) --start-gcode Load initial G-code from the supplied file. This will overwrite the default command (home all axes [G28]). --end-gcode Load final G-code from the supplied file. This will overwrite the default commands (turn off temperature [M104 S0], home X axis [G28 X], disable motors [M84]). --layer-gcode Load layer-change G-code from the supplied file (default: nothing). --toolchange-gcode Load tool-change G-code from the supplied file (default: nothing). --randomize-start Randomize starting point across layers (default: yes) --external-perimeters-first Reverse perimeter order. (default: no) --spiral-vase Experimental option to raise Z gradually when printing single-walled vases (default: no) --only-retract-when-crossing-perimeters Disable retraction when travelling between infill paths inside the same island. (default: no) --solid-infill-below-area Force solid infill when a region has a smaller area than this threshold (mm^2, default: $config->{solid_infill_below_area}) --infill-only-where-needed Only infill under ceilings (default: no) --infill-first Make infill before perimeters (default: no) Quality options (slower slicing): --extra-perimeters Add more perimeters when needed (default: yes) --avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed (default: no) --start-perimeters-at-concave-points Try to start perimeters at concave points if any (default: no) --start-perimeters-at-non-overhang Try to start perimeters at non-overhang points if any (default: no) --thin-walls Detect single-width walls (default: yes) --overhangs Experimental option to use bridge flow, speed and fan for overhangs (default: yes) Support material options: --support-material Generate support material for overhangs --support-material-threshold Overhang threshold angle (range: 0-90, set 0 for automatic detection, default: $config->{support_material_threshold}) --support-material-pattern Pattern to use for support material (default: $config->{support_material_pattern}) --support-material-spacing Spacing between pattern lines (mm, default: $config->{support_material_spacing}) --support-material-angle Support material angle in degrees (range: 0-90, default: $config->{support_material_angle}) --support-material-interface-layers Number of perpendicular layers between support material and object (0+, default: $config->{support_material_interface_layers}) --support-material-interface-spacing Spacing between interface pattern lines (mm, set 0 to get a solid layer, default: $config->{support_material_interface_spacing}) --raft-layers Number of layers to raise the printed objects by (range: 0+, default: $config->{raft_layers}) --support-material-enforce-layers Enforce support material on the specified number of layers from bottom, regardless of --support-material and threshold (0+, default: $config->{support_material_enforce_layers}) --dont-support-bridges Experimental option for preventing support material from being generated under bridged areas (default: yes) Retraction options: --retract-length Length of retraction in mm when pausing extrusion (default: $config->{retract_length}[0]) --retract-speed Speed for retraction in mm/s (default: $config->{retract_speed}[0]) --retract-restart-extra Additional amount of filament in mm to push after compensating retraction (default: $config->{retract_restart_extra}[0]) --retract-before-travel Only retract before travel moves of this length in mm (default: $config->{retract_before_travel}[0]) --retract-lift Lift Z by the given distance in mm when retracting (default: $config->{retract_lift}[0]) --retract-layer-change Enforce a retraction before each Z move (default: yes) --wipe Wipe the nozzle while doing a retraction (default: no) Retraction options for multi-extruder setups: --retract-length-toolchange Length of retraction in mm when disabling tool (default: $config->{retract_length}[0]) --retract-restart-extra-toolchnage Additional amount of filament in mm to push after switching tool (default: $config->{retract_restart_extra}[0]) Cooling options: --cooling Enable fan and cooling control --min-fan-speed Minimum fan speed (default: $config->{min_fan_speed}%) --max-fan-speed Maximum fan speed (default: $config->{max_fan_speed}%) --bridge-fan-speed Fan speed to use when bridging (default: $config->{bridge_fan_speed}%) --fan-below-layer-time Enable fan if layer print time is below this approximate number of seconds (default: $config->{fan_below_layer_time}) --slowdown-below-layer-time Slow down if layer print time is below this approximate number of seconds (default: $config->{slowdown_below_layer_time}) --min-print-speed Minimum print speed (mm/s, default: $config->{min_print_speed}) --disable-fan-first-layers Disable fan for the first N layers (default: $config->{disable_fan_first_layers}) --fan-always-on Keep fan always on at min fan speed, even for layers that don't need cooling Skirt options: --skirts Number of skirts to draw (0+, default: $config->{skirts}) --skirt-distance Distance in mm between innermost skirt and object (default: $config->{skirt_distance}) --skirt-height Height of skirts to draw (expressed in layers, 0+, default: $config->{skirt_height}) --min-skirt-length Generate no less than the number of loops required to consume this length of filament on the first layer, for each extruder (mm, 0+, default: $config->{min_skirt_length}) --brim-width Width of the brim that will get added to each object to help adhesion (mm, default: $config->{brim_width}) Transform options: --scale Factor for scaling input object (default: 1) --rotate Rotation angle in degrees (0-360, default: 0) --duplicate Number of items with auto-arrange (1+, default: 1) --bed-size Bed size, only used for auto-arrange (mm, default: $config->{bed_size}->[0],$config->{bed_size}->[1]) --duplicate-grid Number of items with grid arrangement (default: 1,1) --duplicate-distance Distance in mm between copies (default: $config->{duplicate_distance}) Sequential printing options: --complete-objects When printing multiple objects and/or copies, complete each one before starting the next one; watch out for extruder collisions (default: no) --extruder-clearance-radius Radius in mm above which extruder won't collide with anything (default: $config->{extruder_clearance_radius}) --extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance from extruder tip and carriage bottom (default: $config->{extruder_clearance_height}) Miscellaneous options: --notes Notes to be added as comments to the output file --resolution Minimum detail resolution (mm, set zero for full resolution, default: $config->{resolution}) Flow options (advanced): --extrusion-width Set extrusion width manually; it accepts either an absolute value in mm (like 0.65) or a percentage over layer height (like 200%) --first-layer-extrusion-width Set a different extrusion width for first layer --perimeter-extrusion-width Set a different extrusion width for perimeters --infill-extrusion-width Set a different extrusion width for infill --solid-infill-extrusion-width Set a different extrusion width for solid infill --top-infill-extrusion-width Set a different extrusion width for top infill --support-material-extrusion-width Set a different extrusion width for support material --bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: $config->{bridge_flow_ratio}) Multiple extruder options: --extruder-offset Offset of each extruder, if firmware doesn't handle the displacement (can be specified multiple times, default: 0x0) --perimeter-extruder Extruder to use for perimeters (1+, default: $config->{perimeter_extruder}) --infill-extruder Extruder to use for infill (1+, default: $config->{infill_extruder}) --support-material-extruder Extruder to use for support material (1+, default: $config->{support_material_extruder}) --support-material-interface-extruder Extruder to use for support material interface (1+, default: $config->{support_material_interface_extruder}) --ooze-prevention Drop temperature and park extruders outside a full skirt for automatic wiping (default: no) --standby-temperature-delta Temperature difference to be applied when an extruder is not active and --ooze-prevention is enabled (default: $config->{standby_temperature_delta}) EOF exit ($exit_code || 0); } __END__