# Print profiles for the AnkerMake printers.
# https://github.com/prusa3d/PrusaSlicer/pull/9075 by @just-trey

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Anker
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.0
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anker/

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:M5]
name = AnkerMake M5
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5-bed.stl
bed_texture = M5-texture.svg
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER 

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 2500
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 150
brim_separation = 0.1
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
complete_objects = 0
default_acceleration = 2500
dont_support_bridges = 1
elefant_foot_compensation = 0.1
ensure_vertical_shell_thickness = 1
external_perimeter_speed = 150
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 30
extruder_clearance_radius = 45
fill_angle = 45
fill_density = 15%
fill_pattern = cubic
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 200%
first_layer_speed = 50%
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 150
gcode_comments = 0
infill_acceleration = 2500
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 23%
infill_speed = 250
interface_shells = 0
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{digits(layer_height,1,2)}mm_{filament_type[0]}_{printer_model}.gcode
overhangs = 1
perimeter_acceleration = 2500
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_generator = arachne
perimeter_speed = 250
perimeters = 3
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 3
skirt_height = 1
skirts = 3
small_perimeter_speed = 150
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_speed = 175
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 125
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thick_bridges = 1
thin_walls = 0
top_solid_infill_speed = 150
travel_speed = 300
travel_speed_z = 10
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0

[print:*0.08mm*]
inherits = *common*
layer_height = 0.08
first_layer_height = 0.12
bottom_solid_layers = 9
top_solid_layers = 11
bridge_flow_ratio = 0.70

[print:*0.10mm*]
inherits = *common*
layer_height = 0.10
first_layer_height = 0.14
bottom_solid_layers = 7
top_solid_layers = 9
bridge_flow_ratio = 0.70

[print:*0.12mm*]
inherits = *common*
layer_height = 0.12
first_layer_height = 0.16
bottom_solid_layers = 6
top_solid_layers = 7
bridge_flow_ratio = 0.70

[print:*0.16mm*]
inherits = *common*
layer_height = 0.16
first_layer_height = 0.20
bottom_solid_layers = 5
top_solid_layers = 7
bridge_flow_ratio = 0.85

[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
first_layer_height = 0.24
bottom_solid_layers = 4
top_solid_layers = 5

[print:*0.24mm*]
inherits = *common*
layer_height = 0.24
first_layer_height = 0.28
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.28mm*]
inherits = *common*
layer_height = 0.28
first_layer_height = 0.28
bottom_solid_layers = 3
top_solid_layers = 4

[print:0.08 mm SUPERDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.08mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4

[print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.10mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4

[print:0.12 mm DETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.12mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4

[print:0.16 mm OPTIMAL (0.4 mm nozzle) @ANKER]
inherits = *0.16mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4

[print:0.20 mm NORMAL (0.4 mm nozzle) @ANKER]
inherits = *0.20mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4

[print:0.24 mm DRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.24mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4

[print:0.28 mm SUPERDRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.28mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4

[filament:*common*]
cooling = 0
compatible_printers = 
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 30
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANKERMAKE.*/

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 210
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 2
temperature = 205

[filament:*PLA+*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 220
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 2
temperature = 210

[filament:*PET*]
inherits = *common*
bed_temperature = 70
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 50
bridge_fan_speed = 100
temperature = 240

[filament:*ABS*]
inherits = *common*
bed_temperature = 90
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245

[filament:Generic PLA @ANKER]
inherits = *PLA*
filament_vendor = Generic

[filament:Generic PLA+ @ANKER]
inherits = *PLA+*
filament_vendor = Generic

[filament:Generic PETG @ANKER]
inherits = *PET*
filament_vendor = Generic

[filament:Generic ABS @ANKER]
inherits = *ABS*
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic


# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}
between_objects_gcode = 
pause_print_gcode = 
deretract_speed = 60
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 2500
machine_max_acceleration_retracting = 2500
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 2500
machine_max_acceleration_y = 2500
machine_max_acceleration_z = 2500
machine_max_feedrate_e = 100
machine_max_feedrate_x = 300
machine_max_feedrate_y = 300
machine_max_feedrate_z = 20
machine_max_jerk_e = 3
machine_max_jerk_x = 30
machine_max_jerk_y = 30
machine_max_jerk_z = 0.3
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
max_print_height = 250
printer_notes = 
printer_settings_id = 
retract_before_travel = 2
retract_before_wipe = 70%
retract_layer_change = 1
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
single_extruder_multi_material = 0
thumbnails = 64x64,256x256
thumbnails_format = JPG
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
default_filament_profile = "Generic PLA+ @ANKER"
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for nozzle temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)
end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84

[printer:*M5*]
inherits = *common*
bed_shape = 0x0,235-0,235x235,0x235
max_print_height = 250
printer_model = M5
retract_length = 1.25
retract_speed = 60
deretract_speed = 60
retract_before_travel = 1
retract_before_wipe = 0%
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANKERMAKE\nPRINTER_MODEL_M5

[printer:AnkerMake M5 (0.4 mm nozzle)]
inherits = *M5*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0.2
default_print_profile = "0.16 mm OPTIMAL (0.4 mm nozzle) @ANKER"