# Print profiles for the Ultimaker printers. # https://github.com/prusa3d/PrusaSlicer-settings/issues/143 # author: https://github.com/foreachthing [vendor] # Vendor name will be shown by the Config Wizard. name = Ultimaker # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. config_version = 1.0.2 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Ultimaker/ # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install. # Printer model name will be shown by the installation wizard. [printer_model:ULTIMAKER2] name = Ultimaker 2 variants = 0.4 technology = FFF bed_model = ultimaker2_bed.stl bed_texture = ultimaker2.svg default_materials = Generic PLA @ULTIMAKER2; Generic PETG @ULTIMAKER2; Generic ABS @ULTIMAKER2 # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. # Common print preset [print:*common*] avoid_crossing_perimeters = 1 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = rectilinear bottom_solid_layers = 4 bottom_solid_min_thickness = 0 bridge_acceleration = 0 bridge_angle = 0 bridge_flow_ratio = 1 bridge_speed = 60 brim_separation = 0 brim_type = outer_only brim_width = 0 clip_multipart_objects = 0 compatible_printers = compatible_printers_condition = complete_objects = 0 default_acceleration = 0 dont_support_bridges = 0 draft_shield = disabled elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 0 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 75% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 50 extruder_clearance_radius = 60 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = grid first_layer_acceleration = 0 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.45 first_layer_height = 0.2 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 20 gcode_comments = 1 gcode_label_objects = 0 infill_acceleration = 0 infill_anchor = 600% infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.5 infill_first = 1 infill_only_where_needed = 0 infill_overlap = 35% infill_speed = 60 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 80 max_volumetric_speed = 0 min_skirt_length = 2 mmu_segmented_region_max_width = 0 notes = Ultimaker 2, 0.4 mm Nozzle only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 50 perimeters = 2 post_process = print_settings_id = raft_contact_distance = 0.1 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 3 skirt_height = 1 skirts = 1 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 75% solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 solid_infill_speed = 40 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 45 support_material_auto = 1 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 1 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.4 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_pattern = auto support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear-grid support_material_spacing = 4 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 0 support_material_with_sheath = 0 support_material_xy_spacing = 0.8 thick_bridges = 1 thin_walls = 0 threads = 8 top_fill_pattern = rectilinear top_infill_extrusion_width = 0.45 top_solid_infill_speed = 40 top_solid_layers = 4 top_solid_min_thickness = 0 travel_speed = 120 travel_speed_z = 0 wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:*0.12mm*] inherits = *common* perimeter_speed = 40 external_perimeter_speed = 25 infill_speed = 50 solid_infill_speed = 40 layer_height = 0.12 perimeters = 3 top_infill_extrusion_width = 0.4 bottom_solid_layers = 6 top_solid_layers = 7 [print:*0.20mm*] inherits = *common* perimeter_speed = 40 external_perimeter_speed = 25 infill_speed = 50 solid_infill_speed = 40 layer_height = 0.20 top_infill_extrusion_width = 0.4 bottom_solid_layers = 4 top_solid_layers = 5 [print:*0.25mm*] inherits = *common* perimeter_speed = 40 external_perimeter_speed = 25 infill_speed = 50 solid_infill_speed = 40 layer_height = 0.25 top_infill_extrusion_width = 0.45 bottom_solid_layers = 3 top_solid_layers = 4 [print:0.12mm DETAIL @ULTIMAKER2] inherits = *0.12mm* travel_speed = 150 infill_speed = 50 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_extrusion_width = 0.38 compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4 [print:0.20mm NORMAL @ULTIMAKER2] inherits = *0.20mm* travel_speed = 150 infill_speed = 50 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_extrusion_width = 0.38 compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4 [print:0.25mm DRAFT @ULTIMAKER2] inherits = *0.25mm* travel_speed = 150 infill_speed = 50 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_extrusion_width = 0.38 compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4 # Common filament preset [filament:*common*] cooling = 0 compatible_printers = extrusion_multiplier = 1 filament_cost = 0 filament_density = 0 filament_diameter = 2.85 filament_notes = "" filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ULTIMAKER.*/ [filament:*PLA*] inherits = *common* bed_temperature = 60 fan_below_layer_time = 100 filament_colour = #FFF0E0 filament_max_volumetric_speed = 0 filament_type = PLA filament_density = 1.24 first_layer_bed_temperature = 55 first_layer_temperature = 205 fan_always_on = 1 cooling = 1 min_fan_speed = 100 max_fan_speed = 100 bridge_fan_speed = 100 disable_fan_first_layers = 3 temperature = 210 [filament:*PET*] inherits = *common* fan_below_layer_time = 15 filament_colour = #FFF0E0 filament_max_volumetric_speed = 0 filament_type = PETG filament_density = 1.27 first_layer_bed_temperature = 85 bed_temperature = 85 first_layer_temperature = 240 temperature = 235 fan_always_on = 1 cooling = 1 min_fan_speed = 20 max_fan_speed = 40 bridge_fan_speed = 40 slowdown_below_layer_time = 15 min_print_speed = 10 disable_fan_first_layers = 3 [filament:*ABS*] inherits = *common* fan_below_layer_time = 15 filament_colour = #FFF0E0 filament_max_volumetric_speed = 0 filament_type = ABS filament_density = 1.10 first_layer_bed_temperature = 80 bed_temperature = 80 first_layer_temperature = 240 temperature = 235 fan_always_on = 1 cooling = 1 min_fan_speed = 5 max_fan_speed = 5 bridge_fan_speed = 10 slowdown_below_layer_time = 15 min_print_speed = 10 disable_fan_first_layers = 3 [filament:Generic PLA @ULTIMAKER2] inherits = *PLA* filament_vendor = Generic filament_cost = [filament:Generic Black PLA @ULTIMAKER2] inherits = *PLA* filament_vendor = Generic filament_colour = #0E3F3F filament_cost = [filament:Generic PETG @ULTIMAKER2] inherits = *PET* filament_vendor = Generic filament_cost = [filament:Generic ABS @ULTIMAKER2] inherits = *ABS* filament_vendor = Generic filament_cost = # Common printer preset [printer:*common*] printer_technology = FFF before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;layer:[layer_num];\nM117 Layer [layer_num];\n between_objects_gcode = deretract_speed = 0 extruder_colour = #FFF0E0 extruder_offset = 0x0 gcode_flavor = reprap silent_mode = 0 remaining_times = 0 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 1500 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 3000 machine_max_acceleration_y = 3000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 2.5 machine_max_jerk_x = 20 machine_max_jerk_y = 20 machine_max_jerk_z = 0.4 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 layer_gcode = max_print_height = 212 octoprint_apikey = octoprint_host = printer_notes = printer_settings_id = retract_before_travel = 5 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 6 retract_length_toolchange = 10 retract_lift = 0 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 50 serial_port = single_extruder_multi_material = 0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 use_volumetric_e = 0 variable_layer_height = 1 wipe = 0 z_offset = 0 [printer:Ultimaker 2] inherits = *common* printer_model = ULTIMAKER2 bed_shape = 0x0,224x0,224x225,0x225 printer_variant = 0.4 max_layer_height = 0.3 min_layer_height = 0.08 printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ULTIMAKER\nPRINTER_MODEL_ULTIMAKER2 nozzle_diameter = 0.4 default_print_profile = 0.20mm NORMAL @ULTIMAKER2 default_filament_profile = Generic PLA @ULTIMAKER2 start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\n\nM140 S[first_layer_bed_temperature] ; start bed heating\n\nG28 X0 Y0 Z0 ; move X/Y/Z to endstops\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature] ; continue bed heating\nM109 S[first_layer_temperature] ; wait for nozzle temperature\n\n; Purge and prime\nM83 ; set extruder to relative mode\nG92 E0 ; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000 \nG0 F1200 Z{first_layer_height/2} ; Cut the connection to priming blob\nG0 X100 F10000 ; disconnect with the prime blob\nG0 X50 ; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000 ; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600 ; drag filament to decompress bowden tube\nG1 X100 F3200 ; wipe backwards a bit\nG1 X150 F3200 ; back to where there is no plastic: avoid dragging\nG92 E0 ; reset extruder reference\nM82 ; set extruder to absolute mode\n\n; # # # # # # END Header end_gcode = ; # # # # # # START Footer\nG91 ; relative coordinates\n;G1 E-1 F1200 ; retract the filament\nG1 Z+15 X-10 Y-10 E-7 F6000 ; move Z a bit\n; G1 X-10 Y-10 F6000 ; move XY a bit\nG1 E-5.5 F300 ; retract the filament\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nM104 S0 ; extruder heater off\nM140 S0 ; heated bed heater off (if you have it)\nM84 ; disable motors\n; # # # # # # END Footer\n