# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-12-10 15:40+0100\n"
"PO-Revision-Date: 2020-02-28 09:34+0900\n"
"Last-Translator: lee hak-min <hangmini12@naver.com>\n"
"Language-Team: ulsanether\n"
"Language: ko_KR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.2.3\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Crowdin-Project: slic3rkorean\n"
"X-Crowdin-Language: ko\n"
"X-Crowdin-File: ko_KR.po\n"

#: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:303
msgid "Portions copyright"
msgstr "다른 저작권"

#: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:267
msgid "Copyright"
msgstr "저작권"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:141
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""
"다음의 모든 프로그램 (라이브러리)의 라이센스 계약은 응용 프로그램 라이센스 계"
"약의 일부입니다"

#: src/slic3r/GUI/AboutDialog.cpp:210
#, c-format, boost-format
msgid "About %s"
msgstr "%s에 대하여"

#: src/slic3r/GUI/AboutDialog.cpp:242 src/slic3r/GUI/AboutDialog.cpp:367
#: src/slic3r/GUI/GUI_App.cpp:262
msgid "Version"
msgstr "버전"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:269 src/slic3r/GUI/GUI_App.cpp:268
msgid "is licensed under the"
msgstr "라이선스는"

#: src/slic3r/GUI/AboutDialog.cpp:270 src/slic3r/GUI/GUI_App.cpp:268
msgid "GNU Affero General Public License, version 3"
msgstr "GNU Affero 일반 공중 사용 허가서, 버전 3"

#: src/slic3r/GUI/AboutDialog.cpp:271
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""
"프루사슬라이서는 알레산드로 라넬루치와 RepRap 커뮤니티 Slic3r를 기반으로합니"
"다."

#: src/slic3r/GUI/AboutDialog.cpp:272
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others. 한국어 번역 울산에테르, 밤송이직박구리"

#: src/slic3r/GUI/AboutDialog.cpp:308
msgid "Copy Version Info"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""
"%s에서 오류가 발생했습니다. 메모리 부족으로 인해 발생했을 수 있습니다. 시스템"
"에 충분한 RAM이 있다고 확신하는 경우 버그가 될 수 있으며 보고해 주길 바랍니"
"다."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
msgid ""
"Please save your project and restart PrusaSlicer. We would be glad if you "
"reported the issue."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:204
msgid "Slicing complete"
msgstr "슬라이스 완료"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:199
#, boost-format
msgid "Masked SLA file exported to %1%"
msgstr "마스크 된 SLA 파일을 %1%로 내보냅니"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:286
msgid "Access violation"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:288
msgid "Illegal instruction"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290
msgid "Divide by zero"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:292
msgid "Overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:294
msgid "Underflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:297
msgid "Floating reserved operand"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:300
msgid "Stack overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:659
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:726
msgid "Running post-processing scripts"
msgstr "포스트 프로세싱 스크립트"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:690
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:710
msgid "Unknown error occured during exporting G-code."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:695
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:698
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:701
#, boost-format
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:704
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:707
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:715
#, boost-format
msgid "G-code file exported to %1%"
msgstr "%1%로 내보낸 G 코드 파일"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:729
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr "임시 G 코드를 출력 G 코드에 복사 하지 못했습니다"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:751
#, boost-format
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""
"`%1%`. 로 업로드를 예약 합니다. 창-> 인쇄 호스트 업로드 대기열을 참조 하십시"
"오"

#: src/slic3r/GUI/BedShapeDialog.cpp:31
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:218 src/slic3r/GUI/Plater.cpp:204
#: src/slic3r/GUI/Tab.cpp:2724
msgid "Size"
msgstr "사이즈"

#: src/slic3r/GUI/BedShapeDialog.cpp:32
msgid "Origin"
msgstr "원점"

#: src/slic3r/GUI/BedShapeDialog.cpp:33 src/libslic3r/PrintConfig.cpp:994
msgid "Diameter"
msgstr "노즐 직경"

#: src/slic3r/GUI/BedShapeDialog.cpp:49
msgid "Size in X and Y of the rectangular plate."
msgstr "사각 플레이트 X 및 Y 크기."

#: src/slic3r/GUI/BedShapeDialog.cpp:58
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr "사각 전면 왼쪽 모서리에서 원저(0, 0) G-code 좌표 거리입니다."

#: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:262
#: src/slic3r/GUI/ConfigWizard.cpp:1476 src/slic3r/GUI/ConfigWizard.cpp:1490
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100
#: src/slic3r/GUI/GCodeViewer.cpp:3153 src/slic3r/GUI/GCodeViewer.cpp:3159
#: src/slic3r/GUI/GCodeViewer.cpp:3167 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478
#: src/slic3r/GUI/ObjectDataViewModel.cpp:134
#: src/slic3r/GUI/WipeTowerDialog.cpp:116 src/libslic3r/PrintConfig.cpp:250
#: src/libslic3r/PrintConfig.cpp:267 src/libslic3r/PrintConfig.cpp:274
#: src/libslic3r/PrintConfig.cpp:437 src/libslic3r/PrintConfig.cpp:497
#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:598
#: src/libslic3r/PrintConfig.cpp:606 src/libslic3r/PrintConfig.cpp:656
#: src/libslic3r/PrintConfig.cpp:787 src/libslic3r/PrintConfig.cpp:798
#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:997
#: src/libslic3r/PrintConfig.cpp:1212 src/libslic3r/PrintConfig.cpp:1279
#: src/libslic3r/PrintConfig.cpp:1289 src/libslic3r/PrintConfig.cpp:1563
#: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1818
#: src/libslic3r/PrintConfig.cpp:1836 src/libslic3r/PrintConfig.cpp:1854
#: src/libslic3r/PrintConfig.cpp:1917 src/libslic3r/PrintConfig.cpp:1927
#: src/libslic3r/PrintConfig.cpp:2041 src/libslic3r/PrintConfig.cpp:2050
#: src/libslic3r/PrintConfig.cpp:2069 src/libslic3r/PrintConfig.cpp:2090
#: src/libslic3r/PrintConfig.cpp:2102 src/libslic3r/PrintConfig.cpp:2110
#: src/libslic3r/PrintConfig.cpp:2151 src/libslic3r/PrintConfig.cpp:2159
#: src/libslic3r/PrintConfig.cpp:2169 src/libslic3r/PrintConfig.cpp:2177
#: src/libslic3r/PrintConfig.cpp:2185 src/libslic3r/PrintConfig.cpp:2247
#: src/libslic3r/PrintConfig.cpp:2477 src/libslic3r/PrintConfig.cpp:2547
#: src/libslic3r/PrintConfig.cpp:2564 src/libslic3r/PrintConfig.cpp:2665
#: src/libslic3r/PrintConfig.cpp:2674 src/libslic3r/PrintConfig.cpp:2724
#: src/libslic3r/PrintConfig.cpp:2876 src/libslic3r/PrintConfig.cpp:2964
#: src/libslic3r/PrintConfig.cpp:2971 src/libslic3r/PrintConfig.cpp:2978
#: src/libslic3r/PrintConfig.cpp:2992 src/libslic3r/PrintConfig.cpp:3016
#: src/libslic3r/PrintConfig.cpp:3026 src/libslic3r/PrintConfig.cpp:3036
#: src/libslic3r/PrintConfig.cpp:3220 src/libslic3r/PrintConfig.cpp:3261
#: src/libslic3r/PrintConfig.cpp:3421 src/libslic3r/PrintConfig.cpp:3430
#: src/libslic3r/PrintConfig.cpp:3439 src/libslic3r/PrintConfig.cpp:3449
#: src/libslic3r/PrintConfig.cpp:3514 src/libslic3r/PrintConfig.cpp:3524
#: src/libslic3r/PrintConfig.cpp:3536 src/libslic3r/PrintConfig.cpp:3556
#: src/libslic3r/PrintConfig.cpp:3566 src/libslic3r/PrintConfig.cpp:3576
#: src/libslic3r/PrintConfig.cpp:3594 src/libslic3r/PrintConfig.cpp:3609
#: src/libslic3r/PrintConfig.cpp:3623 src/libslic3r/PrintConfig.cpp:3634
#: src/libslic3r/PrintConfig.cpp:3647 src/libslic3r/PrintConfig.cpp:3692
#: src/libslic3r/PrintConfig.cpp:3702 src/libslic3r/PrintConfig.cpp:3711
#: src/libslic3r/PrintConfig.cpp:3721 src/libslic3r/PrintConfig.cpp:3737
#: src/libslic3r/PrintConfig.cpp:3761
msgid "mm"
msgstr "mm"

#: src/slic3r/GUI/BedShapeDialog.cpp:66
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr "인쇄 배드의 직경. 원점 (0,0) 은 중재봉선에 있다고 가정합니다."

#: src/slic3r/GUI/BedShapeDialog.cpp:79
msgid "Rectangular"
msgstr "직사각형"

#: src/slic3r/GUI/BedShapeDialog.cpp:80
msgid "Circular"
msgstr "원형"

#: src/slic3r/GUI/BedShapeDialog.cpp:81 src/slic3r/GUI/GUI_Preview.cpp:252
#: src/libslic3r/ExtrusionEntity.cpp:331 src/libslic3r/ExtrusionEntity.cpp:366
msgid "Custom"
msgstr "사용자 정의"

#: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:179
#: src/slic3r/GUI/GUI_ObjectList.cpp:1701
msgid "Shape"
msgstr "모양"

#: src/slic3r/GUI/BedShapeDialog.cpp:203
msgid "Load shape from STL..."
msgstr "STL파일 로드."

#: src/slic3r/GUI/BedShapeDialog.cpp:249 src/slic3r/GUI/GCodeViewer.cpp:3682
#: src/slic3r/GUI/MainFrame.cpp:2140
msgid "Settings"
msgstr "설정"

#: src/slic3r/GUI/BedShapeDialog.cpp:273
msgid "Texture"
msgstr "질감"

#: src/slic3r/GUI/BedShapeDialog.cpp:283 src/slic3r/GUI/BedShapeDialog.cpp:354
msgid "Load..."
msgstr "불러오기..."

#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/BedShapeDialog.cpp:362
#: src/slic3r/GUI/Tab.cpp:3699
msgid "Remove"
msgstr "제거"

#: src/slic3r/GUI/BedShapeDialog.cpp:317 src/slic3r/GUI/BedShapeDialog.cpp:388
msgid "Not found:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:344
msgid "Model"
msgstr "모델"

#: src/slic3r/GUI/BedShapeDialog.cpp:508
msgid "Choose an STL file to import bed shape from:"
msgstr "가져올 베드 모양을(STL 파일) 선택합니다:"

#: src/slic3r/GUI/BedShapeDialog.cpp:514 src/slic3r/GUI/BedShapeDialog.cpp:562
#: src/slic3r/GUI/BedShapeDialog.cpp:584
msgid "Invalid file format."
msgstr "잘못된 파일 형식."

#: src/slic3r/GUI/BedShapeDialog.cpp:525
msgid "Error! Invalid model"
msgstr "오류! 잘못된 모델"

#: src/slic3r/GUI/BedShapeDialog.cpp:533
msgid "The selected file contains no geometry."
msgstr "선택한 파일에 없는 형상이 있습니다."

#: src/slic3r/GUI/BedShapeDialog.cpp:537
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""
"선택한 파일은 여러개의 분리 된 영역을 포함 되어 있어 지원 되지 않습니다."

#: src/slic3r/GUI/BedShapeDialog.cpp:552
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr "(PNG /SVG)에서 배드 텍스처를 가져올 파일을 선택합니다."

#: src/slic3r/GUI/BedShapeDialog.cpp:574
msgid "Choose an STL file to import bed model from:"
msgstr "다음에서 베드 모델을 가져올 STL 파일을 선택합니다:"

#: src/slic3r/GUI/BedShapeDialog.hpp:95 src/slic3r/GUI/ConfigWizard.cpp:1396
msgid "Bed Shape"
msgstr "배드 모양"

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr "네트워크 조회"

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr "주소"

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr "호스트이름"

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr "서비스 이름"

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr "옥토프린트 버전"

#: src/slic3r/GUI/BonjourDialog.cpp:224
msgid "Searching for devices"
msgstr "디바이스 검색"

#: src/slic3r/GUI/BonjourDialog.cpp:231
msgid "Finished"
msgstr "완료"

#: src/slic3r/GUI/ButtonsDescription.cpp:42
msgid "Revert color to default"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:57
msgid "Value is the same as the system value"
msgstr "이 값은 시스템 값과 같습니다"

#: src/slic3r/GUI/ButtonsDescription.cpp:58
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr "값이 변경 되었고, 시스템 값 또는 마지막으로 저장된 설정값과 다릅니다."

#: src/slic3r/GUI/ButtonsDescription.cpp:62
msgid "Buttons And Text Colors Description"
msgstr "버튼 및 텍스트 색상 설명"

#: src/slic3r/GUI/ConfigManipulation.cpp:49
msgid ""
"Layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:50
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1449
#: src/libslic3r/PrintConfig.cpp:263
msgid "Layer height"
msgstr "레이어 높이"

#: src/slic3r/GUI/ConfigManipulation.cpp:61
msgid ""
"First layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:62 src/libslic3r/PrintConfig.cpp:1208
msgid "First layer height"
msgstr "첫 레이어 높이"

#: src/slic3r/GUI/ConfigManipulation.cpp:82
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Ensure vertical shell thickness enabled\n"
"- Detect thin walls disabled"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:90
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr "나선형 꽃병을 활성화하기 위해 이러한 설정을 조정해야 합니까?"

#: src/slic3r/GUI/ConfigManipulation.cpp:91
msgid "Spiral Vase"
msgstr "스파이럴 바이스"

#: src/slic3r/GUI/ConfigManipulation.cpp:121
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""
"와이프 타워(프라임 타워)는 현재 비수용성 지원만 지원합니다.\n"
"공구 교환을 트리거하지 않고 현재 압출기로 인쇄된 경우\n"
"(support_material_extruder support_material_interface_extruder 모두 0으로 설"
"정해야 합니다)."

#: src/slic3r/GUI/ConfigManipulation.cpp:125
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr "와이프 타워를 활성화하기 위해 이러한 설정을 조정해야 합니까?"

#: src/slic3r/GUI/ConfigManipulation.cpp:126
#: src/slic3r/GUI/ConfigManipulation.cpp:146
msgid "Wipe Tower"
msgstr "와이프 타워(프라임 타워)"

#: src/slic3r/GUI/ConfigManipulation.cpp:142
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""
"와이프 타워(프라임 타워)가 가용성 지지체와 함께 작동 하려면 서포트 레이어를 "
"객체(object) 레이어와 동기화 해야 합니다."

#: src/slic3r/GUI/ConfigManipulation.cpp:145
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr "와이프 타워를 활성화하기 위해 지원 레이어를 동기화해야 합니까?"

#: src/slic3r/GUI/ConfigManipulation.cpp:163
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""
"다음 기능이 활성화된 경우 더 나은 작업을 지원합니다.\n"
"- 브리징 경계를 감지"

#: src/slic3r/GUI/ConfigManipulation.cpp:166
msgid "Shall I adjust those settings for supports?"
msgstr "지원에 대한 설정을 조정해야 합니까?"

#: src/slic3r/GUI/ConfigManipulation.cpp:167
msgid "Support Generator"
msgstr "서포트 생성"

#: src/slic3r/GUI/ConfigManipulation.cpp:194
#, boost-format
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr "%1% 채우기 패턴은 100%% 밀도로 작동하도록 되어 있지 않습니다."

#: src/slic3r/GUI/ConfigManipulation.cpp:197
msgid "Shall I switch to rectilinear fill pattern?"
msgstr "직선 채우기 패턴으로 전환해야 합니까?"

#: src/slic3r/GUI/ConfigManipulation.cpp:198
#: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128
#: src/slic3r/GUI/Plater.cpp:460 src/slic3r/GUI/Tab.cpp:1502
#: src/slic3r/GUI/Tab.cpp:1504 src/libslic3r/PrintConfig.cpp:452
#: src/libslic3r/PrintConfig.cpp:693 src/libslic3r/PrintConfig.cpp:717
#: src/libslic3r/PrintConfig.cpp:1071 src/libslic3r/PrintConfig.cpp:1085
#: src/libslic3r/PrintConfig.cpp:1122 src/libslic3r/PrintConfig.cpp:1369
#: src/libslic3r/PrintConfig.cpp:1379 src/libslic3r/PrintConfig.cpp:1448
#: src/libslic3r/PrintConfig.cpp:1468 src/libslic3r/PrintConfig.cpp:1487
#: src/libslic3r/PrintConfig.cpp:2308 src/libslic3r/PrintConfig.cpp:2325
msgid "Infill"
msgstr "인필(채움)"

#: src/slic3r/GUI/ConfigManipulation.cpp:326
msgid "Head penetration should not be greater than the head width."
msgstr "헤드 관통은 헤드 폭 보다 크지 않아야 합니다."

#: src/slic3r/GUI/ConfigManipulation.cpp:328
msgid "Invalid Head penetration"
msgstr "잘못된 헤드 관통"

#: src/slic3r/GUI/ConfigManipulation.cpp:339
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr "핀헤드 지름은 기둥 지름 보다 작아야 합니다."

#: src/slic3r/GUI/ConfigManipulation.cpp:341
msgid "Invalid pinhead diameter"
msgstr "잘못된 핀 헤드 지름"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
msgid "Upgrade"
msgstr "업그레이드"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
msgid "Downgrade"
msgstr "다운그레이드"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
msgid "Before roll back"
msgstr "롤백 전에"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:317
msgid "User"
msgstr "사용자"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28
#: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:317
msgid "Unknown"
msgstr "알 수 없음"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
msgid "Active"
msgstr "활동중"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
msgid "PrusaSlicer version"
msgstr "Prusa슬라이서 버전"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1323
msgid "print"
msgstr "출력"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
msgid "filaments"
msgstr "필라멘트"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1325
msgid "SLA print"
msgstr "SLA 인쇄"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
#: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1326
msgid "SLA material"
msgstr "SLA 재료"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1327
msgid "printer"
msgstr "프린터"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1366
msgid "vendor"
msgstr "제조 회사"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
msgid "version"
msgstr "버전"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76
msgid "min PrusaSlicer version"
msgstr "이전 slic3r 버전"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
msgid "max PrusaSlicer version"
msgstr "최신 slic3r 버전"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "model"
msgstr "모델"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "variants"
msgstr "변종"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93
#, c-format, boost-format
msgid "Incompatible with this %s"
msgstr "%s 와 호환되지 않습니다"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96
msgid "Activate"
msgstr "활성화"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123
msgid "Configuration Snapshots"
msgstr "구성 스냅숏"

#: src/slic3r/GUI/ConfigWizard.cpp:262
msgid "nozzle"
msgstr "노즐"

#: src/slic3r/GUI/ConfigWizard.cpp:266
msgid "Alternate nozzles:"
msgstr "대체 노즐:"

#: src/slic3r/GUI/ConfigWizard.cpp:330
msgid "All standard"
msgstr "모두 표준설정"

#: src/slic3r/GUI/ConfigWizard.cpp:330
msgid "Standard"
msgstr "표준"

#: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
#: src/slic3r/GUI/Preferences.cpp:413 src/slic3r/GUI/Tab.cpp:3781
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
msgid "All"
msgstr "모두 선택"

#: src/slic3r/GUI/ConfigWizard.cpp:332 src/slic3r/GUI/ConfigWizard.cpp:652
#: src/slic3r/GUI/DoubleSlider.cpp:2030 src/slic3r/GUI/Plater.cpp:432
#: src/slic3r/GUI/Plater.cpp:578 src/slic3r/GUI/Preferences.cpp:415
#: src/libslic3r/PrintConfig.cpp:1268
msgid "None"
msgstr "없음"

#: src/slic3r/GUI/ConfigWizard.cpp:484
#, c-format, boost-format
msgid "Welcome to the %s Configuration Assistant"
msgstr "%s 구성 도우미에 오신 것을 환영 합니다"

#: src/slic3r/GUI/ConfigWizard.cpp:486
#, c-format, boost-format
msgid "Welcome to the %s Configuration Wizard"
msgstr "%s 구성 마법사에 오신 것을 환영 합니다"

#: src/slic3r/GUI/ConfigWizard.cpp:488
msgid "Welcome"
msgstr "환영합니다"

#: src/slic3r/GUI/ConfigWizard.cpp:490
#, c-format, boost-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""
"안녕하세요 ,%s에 오신 것을 환영 합니다! 이 %s는 초기 구성에 도움이 됩니다. "
"몇 가지 설정만으로 인쇄 준비가 될 것입니다."

#: src/slic3r/GUI/ConfigWizard.cpp:495
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:498
msgid ""
"Perform desktop integration (Sets this binary to be searchable by the "
"system)."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:550
#, c-format, boost-format
msgid "%s Family"
msgstr "%s의 가족들"

#: src/slic3r/GUI/ConfigWizard.cpp:640
msgid "Printer:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:642
msgid "Vendor:"
msgstr "벤더:"

#: src/slic3r/GUI/ConfigWizard.cpp:643
msgid "Profile:"
msgstr "프로필:"

#: src/slic3r/GUI/ConfigWizard.cpp:720 src/slic3r/GUI/ConfigWizard.cpp:892
#: src/slic3r/GUI/ConfigWizard.cpp:952 src/slic3r/GUI/ConfigWizard.cpp:1088
msgid "(All)"
msgstr "(모두)"

#: src/slic3r/GUI/ConfigWizard.cpp:752
#, boost-format
msgid ""
"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:752 src/slic3r/GUI/ConfigWizard.cpp:2043
#: src/slic3r/GUI/ConfigWizard.cpp:2910
msgid "Filaments"
msgstr "필라멘트"

#: src/slic3r/GUI/ConfigWizard.cpp:752
msgid "SLA materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:755
#, boost-format
msgid "All installed printers are compatible with the selected %1%."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1324
msgid "filament"
msgstr "필라멘트"

#: src/slic3r/GUI/ConfigWizard.cpp:778
msgid ""
"Only the following installed printers are compatible with the selected "
"filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:779
msgid ""
"Only the following installed printers are compatible with the selected SLA "
"materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1175
msgid "Custom Printer Setup"
msgstr "사용자 지정 프린터 설정"

#: src/slic3r/GUI/ConfigWizard.cpp:1175
msgid "Custom Printer"
msgstr "사용자 정의 프린터"

#: src/slic3r/GUI/ConfigWizard.cpp:1177
msgid "Define a custom printer profile"
msgstr "사용자 정의 프린터 프로필"

#: src/slic3r/GUI/ConfigWizard.cpp:1179
msgid "Custom profile name:"
msgstr "사용자 정의 프로필 명칭:"

#: src/slic3r/GUI/ConfigWizard.cpp:1206
msgid "Automatic updates"
msgstr "자동 업데이트"

#: src/slic3r/GUI/ConfigWizard.cpp:1206
msgid "Updates"
msgstr "업데이트"

#: src/slic3r/GUI/ConfigWizard.cpp:1214
msgid "Check for application updates"
msgstr "프로그램 업데이트 확인"

#: src/slic3r/GUI/ConfigWizard.cpp:1218
#, c-format, boost-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"활성화 된 경우 %s은 온라인의 새 버전을 확인합니다. 새 버전을 사용할 수 있게 "
"되면, 다음 응용 프로그램 시작시 알림이 표시됩니다 (프로그램 사용 중에는 절대"
"로 사용하지 마십시오).이것은 단순한 알림 일뿐 자동으로 설치가 되지 않습니다."

#: src/slic3r/GUI/ConfigWizard.cpp:1224 src/slic3r/GUI/Preferences.cpp:173
msgid "Update built-in Presets automatically"
msgstr "기존의 설정 자동 업데이트"

#: src/slic3r/GUI/ConfigWizard.cpp:1228
#, c-format, boost-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"활성화 된 경우 %s은 백그라운드에서, 시스템 사전 설정을 다운로드합니다. 이러"
"한 업데이트는 별도의 임시 위치에 다운로드됩니다. 새로운 사전 설정 버전을 사용"
"할 수 있게되면 응용 프로그램 시작시 제공됩니다."

#: src/slic3r/GUI/ConfigWizard.cpp:1231
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""
"업데이트는 사용자의 동의를 받아야 하고, 지정된 이전 설정을 덮어 쓰지 않습니"
"다."

#: src/slic3r/GUI/ConfigWizard.cpp:1236
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""
"또한 업데이트가 적용되기 전에 전체 구성의 백업 구성(스냅샷)이 생성됩니다."

#: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
#: src/slic3r/GUI/Plater.cpp:3499
msgid "Reload from disk"
msgstr "디스크에서 다시 불러오기"

#: src/slic3r/GUI/ConfigWizard.cpp:1246
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr "모델 및 부품 소스의 전체 경로 이름을 3mf 및 amf 파일로 내보내기"

#: src/slic3r/GUI/ConfigWizard.cpp:1250
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""
"활성화된 경우 디스크에서 다시 로드 명령을 사용하여 호출될 때 파일을 자동으로 "
"찾고 로드할 수 있습니다.\n"
"활성화되지 않으면 디스크에서 다시 로드 명령에서 열린 파일 대화 상자를 사용하"
"여 각 파일을 선택하라는 요청이 표시됩니다."

#: src/slic3r/GUI/ConfigWizard.cpp:1259
msgid "Files association"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1261 src/slic3r/GUI/Preferences.cpp:155
msgid "Associate .3mf files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1262 src/slic3r/GUI/Preferences.cpp:162
msgid "Associate .stl files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1272
msgid "View mode"
msgstr "방법 보기"

#: src/slic3r/GUI/ConfigWizard.cpp:1274
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""
"PrusaSlicer의 사용자 인터페이스는 세 가지 변형으로 제공됩니다.\n"
"간단하고 고급, 전문가.\n"
"단순 모드는 일반 3D 인쇄와 관련된 가장 자주 사용되는 설정만 표시합니다. 다른 "
"두 가지는 점진적으로 더 정교한 미세 조정을 제공하며, 각각 고급 및 전문가 사용"
"자에게 적합합니다."

#: src/slic3r/GUI/ConfigWizard.cpp:1279
msgid "Simple mode"
msgstr "단순 모드"

#: src/slic3r/GUI/ConfigWizard.cpp:1280
msgid "Advanced mode"
msgstr "고급 모드"

#: src/slic3r/GUI/ConfigWizard.cpp:1281
msgid "Expert mode"
msgstr "전문가 모드"

#: src/slic3r/GUI/ConfigWizard.cpp:1287
msgid "The size of the object can be specified in inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1288
msgid "Use inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1322
msgid "Other Vendors"
msgstr "다른 공급 업체"

#: src/slic3r/GUI/ConfigWizard.cpp:1326
#, c-format, boost-format
msgid "Pick another vendor supported by %s"
msgstr "%s가 지원하는 다른 공급 업체를 선택하십시오:"

#: src/slic3r/GUI/ConfigWizard.cpp:1357
msgid "Firmware Type"
msgstr "펌웨어 종류"

#: src/slic3r/GUI/ConfigWizard.cpp:1357 src/slic3r/GUI/Tab.cpp:2332
msgid "Firmware"
msgstr "펌웨어"

#: src/slic3r/GUI/ConfigWizard.cpp:1361
msgid "Choose the type of firmware used by your printer."
msgstr "프린터에 업로드 할 펌웨어를 선택하세요."

#: src/slic3r/GUI/ConfigWizard.cpp:1396
msgid "Bed Shape and Size"
msgstr "배드 모양과 크기"

#: src/slic3r/GUI/ConfigWizard.cpp:1399
msgid "Set the shape of your printer's bed."
msgstr "프린터 배드모양을 설정하세요."

#: src/slic3r/GUI/ConfigWizard.cpp:1433 src/slic3r/GUI/Field.cpp:255
#: src/slic3r/GUI/Field.cpp:324 src/slic3r/GUI/Field.cpp:1563
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:429
msgid "Invalid numeric input."
msgstr "숫자 입력이 잘못 되었습니다."

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Filament and Nozzle Diameters"
msgstr "필라멘트와 노즐 크기"

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Print Diameters"
msgstr "인쇄 직경"

#: src/slic3r/GUI/ConfigWizard.cpp:1472
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "핫 엔드 노즐 직경을 입력하십시오."

#: src/slic3r/GUI/ConfigWizard.cpp:1475
msgid "Nozzle Diameter:"
msgstr "노즐 직경:"

#: src/slic3r/GUI/ConfigWizard.cpp:1485
msgid "Enter the diameter of your filament."
msgstr "필라멘트의 직경을 입력하십시오."

#: src/slic3r/GUI/ConfigWizard.cpp:1486
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"정밀도가 필요하므로 캘리퍼를 사용하여 필라멘트를 따라 여러 번 측정 한 다음 평"
"균을 계산하십시오."

#: src/slic3r/GUI/ConfigWizard.cpp:1489
msgid "Filament Diameter:"
msgstr "필라멘트 직경:"

#: src/slic3r/GUI/ConfigWizard.cpp:1547
msgid "Nozzle and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1547
msgid "Temperatures"
msgstr "온도"

#: src/slic3r/GUI/ConfigWizard.cpp:1563
msgid "Enter the temperature needed for extruding your filament."
msgstr "필라멘트 압출에 필요한 온도를 입력하십시오."

#: src/slic3r/GUI/ConfigWizard.cpp:1564
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "보통 PLA의 경우 160 ~ 230 ° C, ABS의 경우 215 ~ 250 ° C입니다."

#: src/slic3r/GUI/ConfigWizard.cpp:1567
msgid "Extrusion Temperature:"
msgstr "출력 온도 :"

#: src/slic3r/GUI/ConfigWizard.cpp:1568 src/slic3r/GUI/ConfigWizard.cpp:1582
#: src/libslic3r/PrintConfig.cpp:395 src/libslic3r/PrintConfig.cpp:1188
#: src/libslic3r/PrintConfig.cpp:1243 src/libslic3r/PrintConfig.cpp:2786
msgid "°C"
msgstr "°C"

#: src/slic3r/GUI/ConfigWizard.cpp:1577
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr "필라멘트가 핫배드에 접착하는데 필요한 온도를 입력하십시오."

#: src/slic3r/GUI/ConfigWizard.cpp:1578
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""
"보통은 PLA의 경우 60 ° C이고 ABS의 경우 110 ° C입니다. 핫배드가 없는 경우에"
"는 0으로 두십시오."

#: src/slic3r/GUI/ConfigWizard.cpp:1581
msgid "Bed Temperature:"
msgstr "배드 온도 :"

#: src/slic3r/GUI/ConfigWizard.cpp:2043 src/slic3r/GUI/ConfigWizard.cpp:2913
msgid "SLA Materials"
msgstr "SLA 재료"

#: src/slic3r/GUI/ConfigWizard.cpp:2097
msgid "FFF Technology Printers"
msgstr "FFF 기술 프린터"

#: src/slic3r/GUI/ConfigWizard.cpp:2102
msgid "SLA Technology Printers"
msgstr "SLA 기술 프린터"

#: src/slic3r/GUI/ConfigWizard.cpp:2338
#, boost-format
msgid ""
"Following printer profiles has no default filament: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2339
#, boost-format
msgid ""
"Following printer profiles has no default material: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2340 src/slic3r/GUI/ConfigWizard.cpp:2438
#: src/slic3r/GUI/DoubleSlider.cpp:2521 src/slic3r/GUI/DoubleSlider.cpp:2542
#: src/slic3r/GUI/GUI.cpp:232
msgid "Notice"
msgstr "공지"

#: src/slic3r/GUI/ConfigWizard.cpp:2459
msgid "The following FFF printer models have no filament selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2463
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2477
msgid "The following SLA printer models have no materials selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2481
msgid "Do you want to select default SLA materials for these printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2523
msgid "Configuration is edited in ConfigWizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2566
msgid "All user presets will be deleted."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2596
msgid "A new vendor was installed and one of its printers will be activated"
msgid_plural ""
"New vendors were installed and one of theirs printers will be activated"
msgstr[0] ""

#: src/slic3r/GUI/ConfigWizard.cpp:2625
msgid "Do you want to continue changing the configuration?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2691
msgid "A new Printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2696
msgid "Some Printers were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2717
msgid "A new filament was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2718
msgid "A new SLA material was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2726
msgid "Some filaments were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2726
msgid "Some SLA materials were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2770
msgid "Custom printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2855
msgid "Select all standard printers"
msgstr "이 프로파일과 호환 가능한 프린터를 선택하세요"

#: src/slic3r/GUI/ConfigWizard.cpp:2858
msgid "< &Back"
msgstr "< &뒤로"

#: src/slic3r/GUI/ConfigWizard.cpp:2859
msgid "&Next >"
msgstr "&다음 >"

#: src/slic3r/GUI/ConfigWizard.cpp:2860
msgid "&Finish"
msgstr "&완료"

#: src/slic3r/GUI/ConfigWizard.cpp:2861
#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:490
#: src/slic3r/GUI/FirmwareDialog.cpp:153
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
msgid "Cancel"
msgstr "취소"

#: src/slic3r/GUI/ConfigWizard.cpp:2881
msgid "Prusa FFF Technology Printers"
msgstr "Prusa FFF 방식 프린터"

#: src/slic3r/GUI/ConfigWizard.cpp:2889
msgid "Prusa MSLA Technology Printers"
msgstr "Prusa MSLA 방식 프린터"

#: src/slic3r/GUI/ConfigWizard.cpp:2910
msgid "Filament Profiles Selection"
msgstr "필라멘트 프로파일 선택"

#: src/slic3r/GUI/ConfigWizard.cpp:2910 src/slic3r/GUI/ConfigWizard.cpp:2913
#: src/slic3r/GUI/GUI_ObjectList.cpp:3781
msgid "Type:"
msgstr "형식:"

#: src/slic3r/GUI/ConfigWizard.cpp:2913
msgid "SLA Material Profiles Selection"
msgstr "SLA 재질 프로파일 선택"

#: src/slic3r/GUI/ConfigWizard.cpp:3034
msgid "Configuration Assistant"
msgstr "구성 도우미"

#: src/slic3r/GUI/ConfigWizard.cpp:3035
msgid "Configuration &Assistant"
msgstr "구성 & 도우미"

#: src/slic3r/GUI/ConfigWizard.cpp:3037
msgid "Configuration Wizard"
msgstr "구성 마법사"

#: src/slic3r/GUI/ConfigWizard.cpp:3038
msgid "Configuration &Wizard"
msgstr "구성 & 마법사"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232
msgid ""
"Performing desktop integration failed - boost::filesystem::canonical did not "
"return appimage path."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243
msgid "Performing desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:378
msgid ""
"Performing desktop integration failed because the application directory was "
"not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:419
msgid ""
"Performing desktop integration failed - could not create Gcodeviewer desktop "
"file. PrusaSlicer desktop file was probably created successfully."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
#: src/slic3r/GUI/GUI_App.cpp:2141
msgid "Desktop Integration"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:466
msgid ""
"Desktop Integration sets this binary to be searchable by the system.\n"
"\n"
"Press \"Perform\" to proceed."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:480
msgid "Perform"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:486
#: src/slic3r/GUI/GLCanvas3D.cpp:4705 src/slic3r/GUI/KBShortcutsDialog.cpp:97
#: src/slic3r/GUI/MainFrame.cpp:1335
msgid "Undo"
msgstr "되돌리기"

#: src/slic3r/GUI/DoubleSlider.cpp:109
msgid "Place bearings in slots and resume printing"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1379
msgid "One layer mode"
msgstr "하나의 레이어 모드"

#: src/slic3r/GUI/DoubleSlider.cpp:1381
msgid "Discard all custom changes"
msgstr "모든 사용자 지정 변경 내용 삭제"

#: src/slic3r/GUI/DoubleSlider.cpp:1385 src/slic3r/GUI/DoubleSlider.cpp:2254
msgid "Jump to move"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1388
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"Set ruler mode\n"
"or Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1391
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"or Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1396
msgid "Edit current color - Right click the colored slider segment"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1398
msgid "This is wipe tower layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1408
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing sequentually."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1412
msgid "Print mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1426
msgid "Add extruder change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1428
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1430
msgid "Add color change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1431
msgid "or press \"+\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1433
msgid "Add another code - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1434
msgid "Add another code - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1440
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1458
msgid "continue"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1466
#, boost-format
msgid "Color change (\"%1%\")"
msgstr "색상 변경(\"%1%\")"

#: src/slic3r/GUI/DoubleSlider.cpp:1467
#, boost-format
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr "압출기 %2%의 색상 변경(\"%1%\")"

#: src/slic3r/GUI/DoubleSlider.cpp:1469
#, boost-format
msgid "Pause print (\"%1%\")"
msgstr "일시 중지 인쇄(\"%1%\")"

#: src/slic3r/GUI/DoubleSlider.cpp:1471
#, boost-format
msgid "Custom template (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1473
#, boost-format
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1480
msgid "Note"
msgstr "메모"

#: src/slic3r/GUI/DoubleSlider.cpp:1482
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1485
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1488
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1491
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1496
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1498
msgid "Edit tick mark - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1499
msgid "Edit tick mark - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1602 src/slic3r/GUI/DoubleSlider.cpp:1633
#: src/slic3r/GUI/GUI_Factories.cpp:778
#, c-format, boost-format
msgid "Extruder %d"
msgstr "익스트루더 %d"

#: src/slic3r/GUI/DoubleSlider.cpp:1603 src/slic3r/GUI/GUI_Factories.cpp:779
msgid "active"
msgstr "활성"

#: src/slic3r/GUI/DoubleSlider.cpp:1612
msgid "Switch code to Change extruder"
msgstr "코드 전환- 압출기 변경"

#: src/slic3r/GUI/DoubleSlider.cpp:1612 src/slic3r/GUI/GUI_Factories.cpp:740
msgid "Change extruder"
msgstr "압출기(익스트루더) 변경"

#: src/slic3r/GUI/DoubleSlider.cpp:1613
msgid "Change extruder (N/A)"
msgstr "돌출자 변경(N/A)"

#: src/slic3r/GUI/DoubleSlider.cpp:1615 src/slic3r/GUI/GUI_Factories.cpp:787
msgid "Use another extruder"
msgstr "다른 압출기 사용"

#: src/slic3r/GUI/DoubleSlider.cpp:1634
msgid "used"
msgstr "사용됨"

#: src/slic3r/GUI/DoubleSlider.cpp:1642
#, boost-format
msgid "Switch code to Color change (%1%) for:"
msgstr "코드 에서 색상 변경(%1%) 에 대 한:"

#: src/slic3r/GUI/DoubleSlider.cpp:1643
#, boost-format
msgid "Add color change (%1%) for:"
msgstr "색상 변경 추가(%1%) 에 대 한:"

#: src/slic3r/GUI/DoubleSlider.cpp:1968
msgid "Add color change"
msgstr "색상 변경 추가"

#: src/slic3r/GUI/DoubleSlider.cpp:1979
msgid "Add pause print"
msgstr "일시 정지 인쇄 추가"

#: src/slic3r/GUI/DoubleSlider.cpp:1983
msgid "Add custom template"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1986
msgid "Add custom G-code"
msgstr "사용자 지정 G 코드 추가"

#: src/slic3r/GUI/DoubleSlider.cpp:2004
msgid "Edit color"
msgstr "색상 편집"

#: src/slic3r/GUI/DoubleSlider.cpp:2005
msgid "Edit pause print message"
msgstr "일시 정지 인쇄 메시지 편집"

#: src/slic3r/GUI/DoubleSlider.cpp:2006
msgid "Edit custom G-code"
msgstr "사용자 지정 G 코드 편집"

#: src/slic3r/GUI/DoubleSlider.cpp:2012
msgid "Delete color change"
msgstr "색상 변경 삭제"

#: src/slic3r/GUI/DoubleSlider.cpp:2013
msgid "Delete tool change"
msgstr "도구 변경 삭제"

#: src/slic3r/GUI/DoubleSlider.cpp:2014
msgid "Delete pause print"
msgstr "일시 정지 인쇄 삭제"

#: src/slic3r/GUI/DoubleSlider.cpp:2015
msgid "Delete custom G-code"
msgstr "사용자 지정 G 코드 삭제"

#: src/slic3r/GUI/DoubleSlider.cpp:2025 src/slic3r/GUI/DoubleSlider.cpp:2254
msgid "Jump to height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2030
msgid "Hide ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2034
msgid "Show object height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2034
msgid "Show object height on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2038
msgid "Show estimated print time"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2038
msgid "Show estimated print time on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2042
msgid "Ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2042
msgid "Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2047
msgid "Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2051
msgid "Set auto color changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2086
msgid "This action will cause deletion of all ticks on vertical slider."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2087 src/slic3r/GUI/Tab.cpp:1318
msgid ""
"This action is not revertible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2088
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1137 src/slic3r/GUI/GUI.cpp:245
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:645
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:675
#: src/slic3r/GUI/WipeTowerDialog.cpp:58 src/slic3r/GUI/WipeTowerDialog.cpp:443
msgid "Warning"
msgstr "위험"

#: src/slic3r/GUI/DoubleSlider.cpp:2215
msgid "Enter custom G-code used on current layer"
msgstr "현재 레이어에 사용되는 사용자 지정 G 코드를 입력합니다."

#: src/slic3r/GUI/DoubleSlider.cpp:2216
#, boost-format
msgid "Custom G-code on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2237
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2238
#, boost-format
msgid "Message for pause print on current layer (%1% mm)."
msgstr "현재 레이어에서 일시 중지 인쇄를 위한 메시지(%1% mm)."

#: src/slic3r/GUI/DoubleSlider.cpp:2253
msgid "Enter the move you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2253
msgid "Enter the height you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2514
msgid "The last color change data was saved for a single extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2515 src/slic3r/GUI/DoubleSlider.cpp:2531
msgid "The last color change data was saved for a multi extruder printing."
msgstr "다중 압출기 인쇄를 위해 마지막 색상 변경 데이터가 저장되었습니다."

#: src/slic3r/GUI/DoubleSlider.cpp:2517
msgid "Your current changes will delete all saved color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2518 src/slic3r/GUI/DoubleSlider.cpp:2539
msgid "Are you sure you want to continue?"
msgstr "정말 계속하기를 원하십니까?"

#: src/slic3r/GUI/DoubleSlider.cpp:2532
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2535
msgid "Do you want to delete all saved tool changes?"
msgstr "저장된 도구 변경 내용을 모두 삭제하시겠습니까?"

#: src/slic3r/GUI/DoubleSlider.cpp:2537
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""
"마지막 색상 변경 데이터는 전체 인쇄에 대한 도구 변경이 있는 다중 압출기 인쇄"
"를 위해 저장되었습니다."

#: src/slic3r/GUI/DoubleSlider.cpp:2538
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""

#: src/slic3r/GUI/ExtraRenderers.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:537
#: src/slic3r/GUI/GUI_ObjectList.cpp:549 src/slic3r/GUI/GUI_ObjectList.cpp:978
#: src/slic3r/GUI/GUI_ObjectList.cpp:1966
#: src/slic3r/GUI/GUI_ObjectList.cpp:4282
#: src/slic3r/GUI/ObjectDataViewModel.cpp:250
#: src/slic3r/GUI/ObjectDataViewModel.cpp:352
#: src/slic3r/GUI/ObjectDataViewModel.cpp:376
#: src/slic3r/GUI/ObjectDataViewModel.cpp:607 src/libslic3r/PrintConfig.cpp:774
msgid "default"
msgstr "기본값"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26
msgid "Set extruder sequence"
msgstr "압출기 시퀀스 설정"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46
msgid "Set extruder change for every"
msgstr "모든 압출기 변경 설정"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60
#: src/libslic3r/PrintConfig.cpp:639 src/libslic3r/PrintConfig.cpp:1382
#: src/libslic3r/PrintConfig.cpp:2079 src/libslic3r/PrintConfig.cpp:2254
#: src/libslic3r/PrintConfig.cpp:2330 src/libslic3r/PrintConfig.cpp:2583
#: src/libslic3r/PrintConfig.cpp:2631 src/libslic3r/PrintConfig.cpp:2650
msgid "layers"
msgstr "레이어"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164
msgid "Random sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166
msgid "If enabled, random sequence of the selected extruders will be used."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172
msgid "Allow next color repetition"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174
msgid "If enabled, a repetition of the next random color will be allowed."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
msgid "Set extruder(tool) sequence"
msgstr "돌출기(도구) 시퀀스 설정"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229
msgid "Remove extruder from sequence"
msgstr "시퀀스에서 압출기 제거"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239
msgid "Add extruder to sequence"
msgstr "시퀀스에 압출기 추가"

#: src/slic3r/GUI/Field.cpp:190
msgid "default value"
msgstr "기본값"

#: src/slic3r/GUI/Field.cpp:193
msgid "parameter name"
msgstr "매개 변수 명칭"

#: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
msgid "N/A"
msgstr "N/A"

#: src/slic3r/GUI/Field.cpp:226 src/slic3r/GUI/Field.cpp:298
#, c-format, boost-format
msgid "%s doesn't support percentage"
msgstr "%s 이(가) 백분율을 지원하지 않음"

#: src/slic3r/GUI/Field.cpp:266
#, c-format, boost-format
msgid ""
"Input value is out of range\n"
"Are you sure that %s is a correct value and that you want to continue?"
msgstr ""

#: src/slic3r/GUI/Field.cpp:269 src/slic3r/GUI/Field.cpp:343
msgid "Parameter validation"
msgstr "매개 변수 유효성 검사"

#: src/slic3r/GUI/Field.cpp:282 src/slic3r/GUI/Field.cpp:390
#: src/slic3r/GUI/Field.cpp:1575
msgid "Input value is out of range"
msgstr "입력 값이 범위를 벗어났습니다."

#: src/slic3r/GUI/Field.cpp:340
#, c-format, boost-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""
"%s %s 대신 %s%%을 하려고 합니까?\n"
"이 값을 %s%%, 로 변경하려면 YES를 선택하십시오. \n"
"또는 %s %s 이(가) 올바른 값인지 확인하는 경우 NO를 선택하세요."

#: src/slic3r/GUI/Field.cpp:397
#, boost-format
msgid ""
"Invalid input format. Expected vector of dimensions in the following format: "
"\"%1%\""
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flash!"
msgstr "완료!"

#: src/slic3r/GUI/FirmwareDialog.cpp:154
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "진행 중입니다. 프린터를 분리하지 마십시오!"

#: src/slic3r/GUI/FirmwareDialog.cpp:201
msgid "Flashing failed"
msgstr "펌웨어 적용 실패"

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing succeeded!"
msgstr "적용 성공!"

#: src/slic3r/GUI/FirmwareDialog.cpp:285
msgid "Flashing failed. Please see the avrdude log below."
msgstr "적용 실패. 아래의 로그를 확인하세요."

#: src/slic3r/GUI/FirmwareDialog.cpp:286
msgid "Flashing cancelled."
msgstr "적용 취소됨."

#: src/slic3r/GUI/FirmwareDialog.cpp:334
#, c-format, boost-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"이 펌웨어 hex 파일이 프린터 모델과 일치 하지 않습니다.\n"
"Hex 파일은 다음을 위한 것입니다: %s\n"
"보고 된 프린터: %s\n"
"\n"
"그래도이 hex 파일을 계속 적용 하시겠습니까?\n"
"확신 하는 경우에만 계속 하십시오."

#: src/slic3r/GUI/FirmwareDialog.cpp:421 src/slic3r/GUI/FirmwareDialog.cpp:456
#, c-format, boost-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr "여러 %s 장치를 찾았습니다. 깜박이면 한 번에 하나씩만 연결하십시오."

#: src/slic3r/GUI/FirmwareDialog.cpp:438
#, c-format, boost-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""
"%s 장치를 찾을 수 없습니다.\n"
"장치가 연결되어 있는 경우 USB 커넥터 옆에 있는 리셋 버튼을 누르십시오..."

#: src/slic3r/GUI/FirmwareDialog.cpp:550
#, c-format, boost-format
msgid "The %s device could not have been found"
msgstr "%s 장치를 찾을 수 없습니다"

#: src/slic3r/GUI/FirmwareDialog.cpp:651
#, c-format, boost-format
msgid "Error accessing port at %s: %s"
msgstr "%s 포트에 액세스 하는 중 오류가 발생 했습니다 :%s"

#: src/slic3r/GUI/FirmwareDialog.cpp:653
#, c-format, boost-format
msgid "Error: %s"
msgstr "에러: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:788
msgid "Firmware flasher"
msgstr "펌웨어 업로드"

#: src/slic3r/GUI/FirmwareDialog.cpp:813
msgid "Firmware image:"
msgstr "펌웨어 이미지:"

#: src/slic3r/GUI/FirmwareDialog.cpp:816
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:297
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:372
msgid "Browse"
msgstr "검색"

#: src/slic3r/GUI/FirmwareDialog.cpp:818
msgid "Serial port:"
msgstr "시리얼 포트:"

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Autodetected"
msgstr "자동 감지"

#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Rescan"
msgstr "재검색"

#: src/slic3r/GUI/FirmwareDialog.cpp:828
msgid "Progress:"
msgstr "진행:"

#: src/slic3r/GUI/FirmwareDialog.cpp:831
msgid "Status:"
msgstr "상태:"

#: src/slic3r/GUI/FirmwareDialog.cpp:832
msgid "Ready"
msgstr "준비"

#: src/slic3r/GUI/FirmwareDialog.cpp:852
msgid "Advanced: Output log"
msgstr "고급: 출력 로그"

#: src/slic3r/GUI/FirmwareDialog.cpp:863
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:310
#: src/slic3r/GUI/Mouse3DController.cpp:543
#: src/slic3r/GUI/PrintHostDialogs.cpp:260
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:122
msgid "Close"
msgstr "닫기"

#: src/slic3r/GUI/FirmwareDialog.cpp:916
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"새펌웨어 적용을 취소하시겠습니까?\n"
"프린터가 사용할 수 없는 상태가 될 수 있습니다!"

#: src/slic3r/GUI/FirmwareDialog.cpp:917
msgid "Confirmation"
msgstr "확인"

#: src/slic3r/GUI/FirmwareDialog.cpp:920
msgid "Cancelling..."
msgstr "취소 중...."

#: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1397
msgid "Shape Gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:76
msgid "Select shape from the gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:100
msgid "Add to bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:101
msgid "Add selected shape(s) to the bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:117
msgid "Add"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:117
msgid "Add one or more custom shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:118 src/slic3r/GUI/GalleryDialog.cpp:508
#: src/slic3r/GUI/GLCanvas3D.cpp:4496 src/slic3r/GUI/GUI_Factories.cpp:444
#: src/slic3r/GUI/Tab.cpp:3699
msgid "Delete"
msgstr "지우기 "

#: src/slic3r/GUI/GalleryDialog.cpp:118
msgid "Delete one or more custom shape. You can't delete system shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:402
msgid "Choose one or more files (STL, OBJ):"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:442
#, boost-format
msgid ""
"It looks like selected %1%-file has an error or is destructed.\n"
"We can't load this file"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:453
msgid "Choose one PNG file:"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:466
msgid "Replacing of the PNG"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:510
msgid "Change thumbnail"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:551 src/slic3r/GUI/GalleryDialog.cpp:556
#, boost-format
msgid "Loading of the \"%1%\""
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:264
msgid "Tool position"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1448
msgid "Generating toolpaths"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1508
msgid "Generating vertex buffer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1843
msgid "Generating index buffers"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3019
msgid "Click to hide"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3019
msgid "Click to show"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3153
msgid "up to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3159
msgid "above"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3167
msgid "from"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3167
msgid "to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3217 src/slic3r/GUI/GCodeViewer.cpp:3218
#: src/slic3r/GUI/GCodeViewer.cpp:3267
msgid "Percentage"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3228 src/slic3r/GUI/GCodeViewer.cpp:3267
#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:957
msgid "Feature type"
msgstr "특색 유형"

#: src/slic3r/GUI/GCodeViewer.cpp:3228 src/slic3r/GUI/GCodeViewer.cpp:3267
#: src/slic3r/GUI/RammingChart.cpp:90
msgid "Time"
msgstr "시간"

#: src/slic3r/GUI/GCodeViewer.cpp:3267 src/slic3r/GUI/GCodeViewer.cpp:3278
#: src/slic3r/GUI/GCodeViewer.cpp:3539
msgid "Used filament"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3270
msgid "Height (mm)"
msgstr "높이 (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:3271
msgid "Width (mm)"
msgstr "폭 (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:3272
msgid "Speed (mm/s)"
msgstr "속도 (mm/s)"

#: src/slic3r/GUI/GCodeViewer.cpp:3273
msgid "Fan Speed (%)"
msgstr "팬 속도(%)"

#: src/slic3r/GUI/GCodeViewer.cpp:3274
msgid "Temperature (°C)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3275
msgid "Volumetric flow rate (mm³/s)"
msgstr "체적 유량(mm³/s)"

#: src/slic3r/GUI/GCodeViewer.cpp:3278 src/slic3r/GUI/GUI_Preview.cpp:224
#: src/slic3r/GUI/GUI_Preview.cpp:957
msgid "Tool"
msgstr "도구"

#: src/slic3r/GUI/GCodeViewer.cpp:3281 src/slic3r/GUI/GUI_Preview.cpp:225
#: src/slic3r/GUI/GUI_Preview.cpp:956
msgid "Color Print"
msgstr "컬러 프린트"

#: src/slic3r/GUI/GCodeViewer.cpp:3319 src/slic3r/GUI/GCodeViewer.cpp:3365
#: src/slic3r/GUI/GCodeViewer.cpp:3370 src/slic3r/GUI/GUI_ObjectList.cpp:312
#: src/slic3r/GUI/wxExtensions.cpp:536 src/libslic3r/PrintConfig.cpp:769
msgid "Extruder"
msgstr "익스트루더(Extruder)"

#: src/slic3r/GUI/GCodeViewer.cpp:3342
msgid "Default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3365
msgid "default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3464 src/slic3r/GUI/GCodeViewer.cpp:3520
msgid "Color change"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3483 src/slic3r/GUI/GCodeViewer.cpp:3518
msgid "Print"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3519 src/slic3r/GUI/GCodeViewer.cpp:3553
msgid "Pause"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3536 src/slic3r/GUI/GCodeViewer.cpp:3539
msgid "Event"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3536 src/slic3r/GUI/GCodeViewer.cpp:3539
msgid "Remaining time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3536 src/slic3r/GUI/GCodeViewer.cpp:3539
msgid "Duration"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3582 src/slic3r/GUI/GUI_Preview.cpp:1048
#: src/libslic3r/PrintConfig.cpp:2881
msgid "Travel"
msgstr "이송"

#: src/slic3r/GUI/GCodeViewer.cpp:3585
msgid "Movement"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3586
msgid "Extrusion"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3587 src/slic3r/GUI/Tab.cpp:1836
#: src/slic3r/GUI/Tab.cpp:2771
msgid "Retraction"
msgstr "리트렉션"

#: src/slic3r/GUI/GCodeViewer.cpp:3604 src/slic3r/GUI/GCodeViewer.cpp:3607
#: src/slic3r/GUI/GUI_Preview.cpp:1049
msgid "Wipe"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3639 src/slic3r/GUI/GUI_Preview.cpp:257
#: src/slic3r/GUI/GUI_Preview.cpp:272
msgid "Options"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3642 src/slic3r/GUI/GUI_Preview.cpp:1050
msgid "Retractions"
msgstr "리트랙션"

#: src/slic3r/GUI/GCodeViewer.cpp:3643 src/slic3r/GUI/GUI_Preview.cpp:1051
msgid "Deretractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3644 src/slic3r/GUI/GUI_Preview.cpp:1052
msgid "Seams"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3645 src/slic3r/GUI/GUI_Preview.cpp:1053
msgid "Tool changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3646 src/slic3r/GUI/GUI_Preview.cpp:1054
msgid "Color changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3647 src/slic3r/GUI/GUI_Preview.cpp:1055
msgid "Print pauses"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3648 src/slic3r/GUI/GUI_Preview.cpp:1056
msgid "Custom G-codes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3668 src/slic3r/GUI/GCodeViewer.cpp:3687
#: src/slic3r/GUI/GUI.cpp:341 src/slic3r/GUI/Plater.cpp:821
#: src/libslic3r/PrintConfig.cpp:299
msgid "Printer"
msgstr "프린터"

#: src/slic3r/GUI/GCodeViewer.cpp:3670 src/slic3r/GUI/GCodeViewer.cpp:3692
#: src/slic3r/GUI/GUI.cpp:337 src/slic3r/GUI/Plater.cpp:817
msgid "Print settings"
msgstr "프린트 설정"

#: src/slic3r/GUI/GCodeViewer.cpp:3673 src/slic3r/GUI/GCodeViewer.cpp:3699
#: src/slic3r/GUI/GUI.cpp:339 src/slic3r/GUI/Plater.cpp:818
#: src/slic3r/GUI/Tab.cpp:1936 src/slic3r/GUI/Tab.cpp:1937
msgid "Filament"
msgstr "필라멘트"

#: src/slic3r/GUI/GCodeViewer.cpp:3712
msgid "Estimated printing times"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3731
msgid "Normal mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3732
msgid "Stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3739 src/libslic3r/PrintConfig.cpp:1166
#: src/libslic3r/PrintConfig.cpp:1184 src/libslic3r/PrintConfig.cpp:1194
#: src/libslic3r/PrintConfig.cpp:1239
msgid "First layer"
msgstr "첫 레이어"

#: src/slic3r/GUI/GCodeViewer.cpp:3740
msgid "Total"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3774
msgid "Show stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3778
msgid "Show normal mode"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:225 src/slic3r/GUI/GLCanvas3D.cpp:4643
#: src/slic3r/GUI/ObjectDataViewModel.cpp:53
msgid "Variable layer height"
msgstr "가변 레이어 높이"

#: src/slic3r/GUI/GLCanvas3D.cpp:227
msgid "Left mouse button:"
msgstr "왼쪽 마우스 단추:"

#: src/slic3r/GUI/GLCanvas3D.cpp:229
msgid "Add detail"
msgstr "디테일 추가"

#: src/slic3r/GUI/GLCanvas3D.cpp:231
msgid "Right mouse button:"
msgstr "오른쪽 마우스 버튼:"

#: src/slic3r/GUI/GLCanvas3D.cpp:233
msgid "Remove detail"
msgstr "디테일 제거"

#: src/slic3r/GUI/GLCanvas3D.cpp:235
msgid "Shift + Left mouse button:"
msgstr "시프트 + 왼쪽 마우스 버튼:"

#: src/slic3r/GUI/GLCanvas3D.cpp:237
msgid "Reset to base"
msgstr "기본으로 재설정"

#: src/slic3r/GUI/GLCanvas3D.cpp:239
msgid "Shift + Right mouse button:"
msgstr "시프트 + 오른쪽 마우스 버튼:"

#: src/slic3r/GUI/GLCanvas3D.cpp:241
msgid "Smoothing"
msgstr "부드럽게"

#: src/slic3r/GUI/GLCanvas3D.cpp:243
msgid "Mouse wheel:"
msgstr "마우스 휠: "

#: src/slic3r/GUI/GLCanvas3D.cpp:245
msgid "Increase/decrease edit area"
msgstr "편집 영역 증가/감소"

#: src/slic3r/GUI/GLCanvas3D.cpp:248
msgid "Adaptive"
msgstr "어뎁티브"

#: src/slic3r/GUI/GLCanvas3D.cpp:254
msgid "Quality / Speed"
msgstr "품질 / 속도"

#: src/slic3r/GUI/GLCanvas3D.cpp:257
msgid "Higher print quality versus higher print speed."
msgstr "인쇄 품질이 높고 인쇄 속도가 빨라질 수 있습니다."

#: src/slic3r/GUI/GLCanvas3D.cpp:268
msgid "Smooth"
msgstr "부드럽게"

#: src/slic3r/GUI/GLCanvas3D.cpp:274 src/libslic3r/PrintConfig.cpp:793
msgid "Radius"
msgstr "     반지름"

#: src/slic3r/GUI/GLCanvas3D.cpp:286
msgid "Keep min"
msgstr "최소 유지"

#: src/slic3r/GUI/GLCanvas3D.cpp:295 src/slic3r/GUI/GLCanvas3D.cpp:4072
msgid "Reset"
msgstr "초기화"

#: src/slic3r/GUI/GLCanvas3D.cpp:561
msgid "Variable layer height - Manual edit"
msgstr "가변 레이어 높이 - 수동 편집"

#: src/slic3r/GUI/GLCanvas3D.cpp:676
msgid "Seq."
msgstr "순서"

#: src/slic3r/GUI/GLCanvas3D.cpp:1276
msgid "Variable layer height - Reset"
msgstr "가변 레이어 높이 - 재설정"

#: src/slic3r/GUI/GLCanvas3D.cpp:1284
msgid "Variable layer height - Adaptive"
msgstr "가변 레이어 높이 - 어뎁티브"

#: src/slic3r/GUI/GLCanvas3D.cpp:1292
msgid "Variable layer height - Smooth all"
msgstr "가변 레이어 높이 - 모두 부드럽게"

#: src/slic3r/GUI/GLCanvas3D.cpp:1704
msgid "Mirror Object"
msgstr "객체(object) 반전"

#: src/slic3r/GUI/GLCanvas3D.cpp:2573
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:560
msgid "Gizmo-Move"
msgstr "개체(Gizmo) 이동"

#: src/slic3r/GUI/GLCanvas3D.cpp:2656
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:562
msgid "Gizmo-Rotate"
msgstr "개체(Gizmo) 회전"

#: src/slic3r/GUI/GLCanvas3D.cpp:3261
msgid "Move Object"
msgstr "객체(object) 이동"

#: src/slic3r/GUI/GLCanvas3D.cpp:3782 src/slic3r/GUI/GLCanvas3D.cpp:4604
msgid "Switch to Settings"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3783 src/slic3r/GUI/GLCanvas3D.cpp:4604
msgid "Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3784 src/slic3r/GUI/GLCanvas3D.cpp:4605
msgid "Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3784 src/slic3r/GUI/GLCanvas3D.cpp:4605
msgid "Material Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3785 src/slic3r/GUI/GLCanvas3D.cpp:4606
msgid "Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3932
msgid "Undo History"
msgstr "실행취소 기록"

#: src/slic3r/GUI/GLCanvas3D.cpp:3932
msgid "Redo History"
msgstr "다시 실행 히스토리"

#: src/slic3r/GUI/GLCanvas3D.cpp:3952
#, c-format, boost-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] "실행 취소 %1$d 작업"

#: src/slic3r/GUI/GLCanvas3D.cpp:3952
#, c-format, boost-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] "작업 %1$d 다시 실행"

#: src/slic3r/GUI/GLCanvas3D.cpp:3972 src/slic3r/GUI/GLCanvas3D.cpp:4622
#: src/slic3r/GUI/KBShortcutsDialog.cpp:106 src/slic3r/GUI/Search.cpp:435
msgid "Search"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3986 src/slic3r/GUI/GLCanvas3D.cpp:3994
#: src/slic3r/GUI/Search.cpp:441
msgid "Enter a search term"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4025
msgid "Arrange options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4055
#, boost-format
msgid "Press %1%left mouse button to enter the exact value"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4057
msgid "Spacing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4064
msgid "Enable rotations (slow)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4082 src/slic3r/GUI/GLCanvas3D.cpp:4514
#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Plater.cpp:1666
msgid "Arrange"
msgstr "정렬"

#: src/slic3r/GUI/GLCanvas3D.cpp:4488
msgid "Add..."
msgstr "추가..."

#: src/slic3r/GUI/GLCanvas3D.cpp:4505 src/slic3r/GUI/KBShortcutsDialog.cpp:96
#: src/slic3r/GUI/Plater.cpp:5413
msgid "Delete all"
msgstr "전부 지우기"

#: src/slic3r/GUI/GLCanvas3D.cpp:4514 src/slic3r/GUI/KBShortcutsDialog.cpp:133
msgid "Arrange selection"
msgstr "선택 정렬"

#: src/slic3r/GUI/GLCanvas3D.cpp:4514
msgid "Click right mouse button to show arrangement options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4536
msgid "Copy"
msgstr "복사"

#: src/slic3r/GUI/GLCanvas3D.cpp:4545
msgid "Paste"
msgstr "붙여넣기"

#: src/slic3r/GUI/GLCanvas3D.cpp:4557 src/slic3r/GUI/GUI_Factories.cpp:1089
#: src/slic3r/GUI/GUI_Factories.cpp:1113 src/slic3r/GUI/GUI_Factories.cpp:1124
msgid "Add instance"
msgstr "복제본 추가"

#: src/slic3r/GUI/GLCanvas3D.cpp:4568 src/slic3r/GUI/GUI_Factories.cpp:1092
msgid "Remove instance"
msgstr "복제본 제거"

#: src/slic3r/GUI/GLCanvas3D.cpp:4581
msgid "Split to objects"
msgstr "객체(object)별 분할"

#: src/slic3r/GUI/GLCanvas3D.cpp:4591
msgid "Split to parts"
msgstr "부품(Part)별 분할"

#: src/slic3r/GUI/GLCanvas3D.cpp:4705 src/slic3r/GUI/GLCanvas3D.cpp:4744
msgid "Click right mouse button to open/close History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4728
#, boost-format
msgid "Next Undo action: %1%"
msgstr "다음 작업 실행 취소 : %1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:4744 src/slic3r/GUI/KBShortcutsDialog.cpp:98
#: src/slic3r/GUI/MainFrame.cpp:1338
msgid "Redo"
msgstr "다시실행"

#: src/slic3r/GUI/GLCanvas3D.cpp:4766
#, boost-format
msgid "Next Redo action: %1%"
msgstr "다음 작업 다시 실행: %1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:6383
msgid "An object outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6384
msgid "A toolpath outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6385
msgid "SLA supports outside the print area were detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6386
msgid "Some objects are not visible during editing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6388
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6462
msgid "Selection-Add from rectangle"
msgstr "선택-사각형에서 추가"

#: src/slic3r/GUI/GLCanvas3D.cpp:6477
msgid "Selection-Remove from rectangle"
msgstr "선택- 사각형에서 제거"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:160 src/libslic3r/PrintConfig.cpp:4320
msgid "Cut"
msgstr "자르기"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478
msgid "in"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198
msgid "Keep upper part"
msgstr "상위 부분 유지"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:199
msgid "Keep lower part"
msgstr "낮은 부분 유지"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:200
msgid "Rotate lower part upwards"
msgstr "아래쪽 부분을 위쪽으로 회전"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:205
msgid "Perform cut"
msgstr "절단 실행"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33
#: src/slic3r/GUI/ObjectDataViewModel.cpp:49
msgid "Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
msgid "Clipping of view"
msgstr "갈무리된것 보기"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
msgid "Reset direction"
msgstr "방향 재설정"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
msgid "Brush size"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
msgid "Brush shape"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
msgid "Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
msgid "Enforce supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
msgid "Right mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:474
msgid "Block supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
msgid "Shift + Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:469
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:270
msgid "Remove selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
msgid "Remove all selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
msgid "Circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
#: src/slic3r/GUI/GUI_Factories.cpp:461
msgid "Sphere"
msgstr "영역"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:68
#: src/libslic3r/PrintConfig.cpp:1147
msgid "Triangles"
msgstr "삼각형(Triangles)"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
msgid "Highlight overhang by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
msgid "Enforce"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
msgid "Tool type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
msgid "Brush"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:128
msgid "Smart fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:131
msgid "Smart fill angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:132
msgid "Split triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67
msgid "On overhangs only"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:179
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:199
#, boost-format
msgid ""
"Preselects faces by overhang angle. It is possible to restrict paintable "
"facets to only preselected faces when the option \"%1%\" is enabled."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:231
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:382
msgid "Paints facets according to the chosen painting brush."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:239
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:395
msgid ""
"Paints neighboring facets whose relative angle is less or equal to set angle."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:243
#, boost-format
msgid "Allows painting only on facets selected by: \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:258
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:423
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:155
msgid "Paints all facets inside, regardless of their orientation."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:267
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:432
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:163
msgid "Ignores facets facing away from the camera."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:276
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:441
msgid "Paints only one facet."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:285
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:290
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:307
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:319
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:450
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:455
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:474
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:486
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:137
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:142
msgid "Alt + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:296
msgid "Splits bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:340
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:348
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:505
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:513
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:182
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:190
msgid "Ctrl + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:353
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:518
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:195
msgid "Reset selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:404
msgid "Block supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:405
msgid "Add supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:472
msgid "Add supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:41
msgid "Place on face"
msgstr "면 배치 "

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30
msgid "Hollow this object"
msgstr "이 개체를 비우기"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31
msgid "Preview hollowed and drilled model"
msgstr "공동화된 모델 미리보기"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32
msgid "Offset"
msgstr "오프셋"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33
#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:57
msgid "Quality"
msgstr "품질"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
#: src/libslic3r/PrintConfig.cpp:3753
msgid "Closing distance"
msgstr "닫힘 거리"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
msgid "Hole diameter"
msgstr "구멍 직경"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
msgid "Hole depth"
msgstr "구멍 깊이"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
msgid "Remove selected holes"
msgstr "선택한 구멍 제거"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
msgid "Remove all holes"
msgstr "모든 구멍 제거"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
msgid "Show supports"
msgstr "서포트 표시"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:286
msgid "Add drainage hole"
msgstr "배수 구멍 추가"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:402
msgid "Delete drainage hole"
msgstr "배수 구멍 삭제"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:596
msgid "Hollowing parameter change"
msgstr "공동화 변수 변경"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:673
msgid "Change drainage hole diameter"
msgstr "배수 구멍 직경 변경"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:767
msgid "Hollow and drill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:817
msgid "Move drainage hole"
msgstr "구멍 이동"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:27
#, boost-format
msgid ""
"Your printer has more extruders than the multi-material painting gizmo "
"supports. For this reason, only the first %1% extruders will be able to be "
"used for painting."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:45
#: src/slic3r/GUI/ObjectDataViewModel.cpp:51
msgid "Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
msgid "First color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118
msgid "Second color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:120
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:701
msgid "Remove painted color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
msgid "Clear all"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:129
msgid "Bucket fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:408
msgid "Paints neighboring facets that have the same color."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:461
msgid "Split bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:704
#, boost-format
msgid "Painted using: Extruder %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:55
msgid "Move"
msgstr "이동"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:466
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:543
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578
#: src/libslic3r/PrintConfig.cpp:4374
msgid "Rotate"
msgstr "회전"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:505
msgid "Optimize orientation"
msgstr "방향 최적화"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:552
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:319
msgid "Apply"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:79
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:579
#: src/libslic3r/PrintConfig.cpp:4389
msgid "Scale"
msgstr "크기"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:273
msgid "Enforce seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:275
msgid "Block seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52
msgid "Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:67
msgid "Mesh name"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:69
msgid "Detail level"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:70
msgid "Decimate ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:113
#, boost-format
msgid ""
"Processing model '%1%' with more than 1M triangles could be slow. It is "
"highly recommend to reduce amount of triangles."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:116
#: src/slic3r/GUI/GUI_Factories.cpp:705
msgid "Simplify model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:143
msgid "Simplify"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:156
msgid "Simplification is currently only allowed when a single part is selected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:157
#: src/slic3r/GUI/MainFrame.cpp:1162 src/slic3r/GUI/MainFrame.cpp:1619
#: src/slic3r/GUI/PrintHostDialogs.cpp:372
msgid "Error"
msgstr "에러"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:250
msgid "Extra high"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:251
msgid "High"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:252
msgid "Medium"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:253
msgid "Low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:254
msgid "Extra low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:304
#, c-format, boost-format
msgid "%d triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:307
msgid "Show wireframe"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:313
msgid "Operation already cancelling. Please wait few seconds."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:322
msgid "Can't apply when proccess preview."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:329
#, boost-format
msgid "Process %1% / 100"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:479
#, boost-format
msgid "Simplify %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39
msgid "Head diameter"
msgstr "헤드 지름"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40
msgid "Lock supports under new islands"
msgstr "새영역에서 서포트 잠금 지원"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1227
msgid "Remove selected points"
msgstr "선택한 지점 제거"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42
msgid "Remove all points"
msgstr "모든 지점 제거"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1230
msgid "Apply changes"
msgstr "변경 내용을 적용"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
msgid "Discard changes"
msgstr "변경사항을 취소"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
msgid "Minimal points distance"
msgstr "최소한의 지점 거리"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
#: src/libslic3r/PrintConfig.cpp:3583
msgid "Support points density"
msgstr "서포트 지점 밀도"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
msgid "Auto-generate points"
msgstr "지점 자동 생성"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Manual editing"
msgstr "수동 편집"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:372
msgid "Add support point"
msgstr "서포트 지점 추가"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:522
msgid "Delete support point"
msgstr "서포트 지점 삭제"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:706
msgid "Change point head diameter"
msgstr "변경된 해드의 끝 점 지름"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:774
msgid "Support parameter change"
msgstr "서포트 매개 변수 변경"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:880
msgid "SLA Support Points"
msgstr "SLA 지원 포인트"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:901
msgid "Do you want to save your manually edited support points?"
msgstr "수동으로 편집한 서포트 지점을 저장 하시 겠습니까?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:902
msgid "Save support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:962
msgid "Move support point"
msgstr "서포트 지점 이동"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1055
msgid "Support points edit"
msgstr "서포트 지점 편집"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1135
msgid "Autogeneration will erase all manually edited points."
msgstr "자동 생성은 수동으로 편집한 모든 점을 지웁히 지웁습니다."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1136
msgid "Are you sure you want to do it?"
msgstr "당신은 그것을 하시겠습니까?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1142
msgid "Autogenerate support points"
msgstr "서포트 자동 생성"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1190
msgid "SLA gizmo keyboard shortcuts"
msgstr "SLA 장치 바로 가기"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1201
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr "참고: 일부 단축키는 (비)편집 모드 에서만 작동 합니다."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
msgid "Left click"
msgstr "왼쪽 클릭"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
msgid "Add point"
msgstr "지점 추가"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
msgid "Right click"
msgstr "오른쪽 클릭"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
msgid "Remove point"
msgstr "복제본 제거"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1225
msgid "Drag"
msgstr "드래그"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
msgid "Move point"
msgstr "지점 이동"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
msgid "Add point to selection"
msgstr "선택 영역에 지점 추가"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
msgid "Remove point from selection"
msgstr "선택 영역에서 지점 제거"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
msgid "Select by rectangle"
msgstr "직사각형으로 선택"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1225
msgid "Deselect by rectangle"
msgstr "사각형으로 선택 해제"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1226
msgid "Select all points"
msgstr "모든 지점들 선택"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1228
msgid "Mouse wheel"
msgstr "마우스 휠"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1228
msgid "Move clipping plane"
msgstr "갈무리된 평면 이동"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1229
msgid "Reset clipping plane"
msgstr "갈무리된 평면 재설정"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
msgid "Switch to editing mode"
msgstr "편집 모드로 전환"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:196
msgid ""
"ERROR: Please close all manipulators available from the left toolbar first"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:561
msgid "Gizmo-Scale"
msgstr "개체(Gizmo) 배율"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:673
msgid "Gizmo-Place on Face"
msgstr "개체(Gizmo)를 배드위로"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1270
msgid ""
"You are currently editing SLA support points. Please, apply or discard your "
"changes first."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:292
msgid "Undefined"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:317
#, boost-format
msgid "%1% was substituted with %2%"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:326
msgid ""
"Most likely the configuration was produced by a newer version of PrusaSlicer "
"or by some PrusaSlicer fork."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:327
msgid "The following values were substituted:"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:328
msgid "Review the substitutions and adjust them if needed."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:338 src/slic3r/GUI/Plater.cpp:819
msgid "SLA print settings"
msgstr "SLA 인쇄 설정"

#: src/slic3r/GUI/GUI.cpp:342 src/slic3r/GUI/PhysicalPrinterDialog.cpp:157
msgid "Physical Printer"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:355
msgid ""
"Configuration bundle was loaded, however some configuration values were not "
"recognized."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:365
#, boost-format
msgid ""
"Configuration file \"%1%\" was loaded, however some configuration values "
"were not recognized."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:266
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:267
msgid "Developed by Prusa Research."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:269
msgid ""
"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:270
msgid "Artwork model by M Boyer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:411
#, boost-format
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:419
#, c-format, boost-format
msgid "%s - BREAKING CHANGE"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:421
msgid "Quit, I will move my data now"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:421
msgid "Start the application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:698
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""
"%s에서 오류가 발생했습니다. 메모리 부족으로 인해 발생했을 수 있습니다. 시스템"
"에 충분한 RAM이 있다고 확신하는 경우 버그가 될 수 있으며 보고하면 기쁠 것입니"
"다.\n"
"\n"
"이제 응용 프로그램이 종료됩니다."

#: src/slic3r/GUI/GUI_App.cpp:701
msgid "Fatal error"
msgstr "치명적인 오류"

#: src/slic3r/GUI/GUI_App.cpp:705
msgid ""
"PrusaSlicer has encountered a localization error. Please report to "
"PrusaSlicer team, what language was active and in which scenario this issue "
"happened. Thank you.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:708
msgid "Critical error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:713
#, boost-format
msgid "Internal error: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:1001
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""
"PrusaSlicer 구성 파일을 구문 분석하는 오류, 아마 손상된 것입니다. 파일을 수동"
"으로 삭제하여 오류에 복구해 보십시오. 사용자 프로필은 영향을 받지 않습니다."

#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1007
msgid ""
"Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:953
#, boost-format
msgid "You are opening %1% version %2%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:956
#, boost-format
msgid ""
"The active configuration was created by <b>%1% %2%</b>,\n"
"while a newer configuration was found in <b>%3%</b>\n"
"created by <b>%1% %4%</b>.\n"
"\n"
"Shall the newer configuration be imported?\n"
"If so, your active configuration will backed up before importing the new "
"configuration."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:964
#, boost-format
msgid ""
"An existing configuration was found in <b>%3%</b>\n"
"created by <b>%1% %2%</b>.\n"
"\n"
"Shall this configuration be imported?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:972
msgid "Import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:973
msgid "Don't import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1047
msgid ""
"You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
"32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
"available in the system.\n"
"Please download and install a 64 bit build of PrusaSlicer from https://www."
"prusa3d.cz/prusaslicer/.\n"
"Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1094
#, c-format, boost-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1096 src/slic3r/GUI/GUI_App.cpp:2968
#: src/slic3r/GUI/OptionsGroup.cpp:985
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:888
msgid "Remember my choice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1176
#, boost-format
msgid "New release version %1% is available."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1177
msgid "See Download page."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1191
#, boost-format
msgid "New prerelease version %1% is available."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1192
msgid "See Releases page."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1233
msgid "Preparing settings tabs"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1584
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1588
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1590
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1594 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
msgid "Information"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1607 src/slic3r/GUI/GUI_App.cpp:1618
msgid "Recreating"
msgstr "재현"

#: src/slic3r/GUI/GUI_App.cpp:1621
msgid "Loading of current presets"
msgstr "현재 기본 설정을 불러오기"

#: src/slic3r/GUI/GUI_App.cpp:1626
msgid "Loading of a mode view"
msgstr "보기 모드를 불러오기"

#: src/slic3r/GUI/GUI_App.cpp:1755
msgid "Choose one file (3MF/AMF):"
msgstr "파일(3MF/AMF) 선택:"

#: src/slic3r/GUI/GUI_App.cpp:1767
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "파일을 선택하세요 (STL/OBJ/AMF/3MF/PRUSA):"

#: src/slic3r/GUI/GUI_App.cpp:1779
msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1790
msgid "Changing of an application language"
msgstr "응용 프로그램 언어 변경"

#: src/slic3r/GUI/GUI_App.cpp:1929
msgid "Select the language"
msgstr "언어를 선택"

#: src/slic3r/GUI/GUI_App.cpp:1929
msgid "Language"
msgstr "언어"

#: src/slic3r/GUI/GUI_App.cpp:2078
msgid "modified"
msgstr "수정된곳"

#: src/slic3r/GUI/GUI_App.cpp:2132
#, c-format, boost-format
msgid "Run %s"
msgstr "%s 실행"

#: src/slic3r/GUI/GUI_App.cpp:2136
msgid "&Configuration Snapshots"
msgstr "구성 스냅샷"

#: src/slic3r/GUI/GUI_App.cpp:2136
msgid "Inspect / activate configuration snapshots"
msgstr "구성 스냅 샷 검사 / 활성화"

#: src/slic3r/GUI/GUI_App.cpp:2137
msgid "Take Configuration &Snapshot"
msgstr "구성 스냅 샷 가져 오기"

#: src/slic3r/GUI/GUI_App.cpp:2137
msgid "Capture a configuration snapshot"
msgstr "구성 스냅 샷 캡처"

#: src/slic3r/GUI/GUI_App.cpp:2138
msgid "Check for Configuration Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2138
msgid "Check for configuration updates"
msgstr "구성 업데이트 확인"

#: src/slic3r/GUI/GUI_App.cpp:2145
msgid "&Preferences"
msgstr "환경 설정"

#: src/slic3r/GUI/GUI_App.cpp:2151
msgid "Application preferences"
msgstr "응용 프로그램 환경 설정"

#: src/slic3r/GUI/GUI_App.cpp:2156 src/slic3r/GUI/wxExtensions.cpp:707
msgid "Simple"
msgstr "단순"

#: src/slic3r/GUI/GUI_App.cpp:2156
msgid "Simple View Mode"
msgstr "기본 보기 모드"

#: src/slic3r/GUI/GUI_App.cpp:2158 src/slic3r/GUI/wxExtensions.cpp:709
msgctxt "Mode"
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2158
msgid "Advanced View Mode"
msgstr "고급 보기 모드"

#: src/slic3r/GUI/GUI_App.cpp:2159 src/slic3r/GUI/wxExtensions.cpp:710
msgid "Expert"
msgstr "전문가"

#: src/slic3r/GUI/GUI_App.cpp:2159
msgid "Expert View Mode"
msgstr "전문가 보기 모드"

#: src/slic3r/GUI/GUI_App.cpp:2164
msgid "Mode"
msgstr "모드"

#: src/slic3r/GUI/GUI_App.cpp:2164
#, c-format, boost-format
msgid "%s View Mode"
msgstr "%s 보기 모드"

#: src/slic3r/GUI/GUI_App.cpp:2167
msgid "&Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2170
msgid "Flash Printer &Firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2170
msgid "Upload a firmware image into an Arduino based printer"
msgstr "아두이노 기반의 프린터 이미지 업로드"

#: src/slic3r/GUI/GUI_App.cpp:2190
msgid "Taking a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2191
msgid ""
"Some presets are modified and the unsaved changes will not be captured by "
"the configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2192
msgid "Snapshot name"
msgstr "스냅 샷 이름"

#: src/slic3r/GUI/GUI_App.cpp:2208
msgid "Loading a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2217
#, boost-format
msgid "Continue to activate a configuration snapshot %1%?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2231
msgid "Failed to activate configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2250
msgid "Restart application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2284
msgid "Language selection"
msgstr "국가에 맞는 언어를 선택"

#: src/slic3r/GUI/GUI_App.cpp:2287
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""
"언어를 전환 하면 응용 프로그램 재시작 합니다. 플레이트 위 객체(object)는 모"
"두 지워집니다."

#: src/slic3r/GUI/GUI_App.cpp:2289 src/slic3r/GUI/Preferences.cpp:561
msgid "Do you want to proceed?"
msgstr "계속 하시겠습니까?"

#: src/slic3r/GUI/GUI_App.cpp:2316
msgid "&Configuration"
msgstr "&구성"

#: src/slic3r/GUI/GUI_App.cpp:2433 src/slic3r/GUI/GUI_App.cpp:2494
msgid "The preset modifications are successfully saved"
msgid_plural "The presets modifications are successfully saved"
msgstr[0] ""

#: src/slic3r/GUI/GUI_App.cpp:2497
msgid "For new project all modifications will be reseted"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2535
msgid "Loading a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2538
msgid "Project is loading"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2538
msgid "Opening new project while some presets are unsaved."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2557
msgid "The uploads are still ongoing"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2557
msgid "Stop them and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2561
msgid "Ongoing uploads"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2767
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr "SLA 방식을 사용 하여 다중 객체(object)를 인쇄할 수는 없습니다."

#: src/slic3r/GUI/GUI_App.cpp:2768 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
#: src/slic3r/GUI/Plater.cpp:2404
msgid "Please check your object list before preset changing."
msgstr "사전 설정을 변경 하기 전에 객체(object) 목록을 확인 하십시오."

#: src/slic3r/GUI/GUI_App.cpp:2792
msgid "Configuration is editing from ConfigWizard"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2817
msgid "Select a gcode file:"
msgstr "gcode 파일 선택:"

#: src/slic3r/GUI/GUI_App.cpp:2967 src/slic3r/GUI/OptionsGroup.cpp:984
msgid "Open hyperlink in default browser?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2967 src/slic3r/GUI/OptionsGroup.cpp:984
msgid "PrusaSlicer: Open hyperlink"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:57 src/slic3r/GUI/GUI_Init.cpp:60
msgid "PrusaSlicer GUI initialization failed"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:60
#, boost-format
msgid "Fatal error, exception catched: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127
#: src/libslic3r/PrintConfig.cpp:264 src/libslic3r/PrintConfig.cpp:381
#: src/libslic3r/PrintConfig.cpp:424 src/libslic3r/PrintConfig.cpp:433
#: src/libslic3r/PrintConfig.cpp:685 src/libslic3r/PrintConfig.cpp:752
#: src/libslic3r/PrintConfig.cpp:760 src/libslic3r/PrintConfig.cpp:1209
#: src/libslic3r/PrintConfig.cpp:1296 src/libslic3r/PrintConfig.cpp:1515
#: src/libslic3r/PrintConfig.cpp:1907 src/libslic3r/PrintConfig.cpp:1974
#: src/libslic3r/PrintConfig.cpp:2208 src/libslic3r/PrintConfig.cpp:2794
#: src/libslic3r/PrintConfig.cpp:2802 src/libslic3r/PrintConfig.cpp:2862
#: src/libslic3r/PrintConfig.cpp:2871
msgid "Layers and Perimeters"
msgstr "레이어 및 둘레"

#: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131
#: src/slic3r/GUI/GUI_Preview.cpp:249 src/slic3r/GUI/Tab.cpp:1546
#: src/slic3r/GUI/Tab.cpp:1548 src/libslic3r/ExtrusionEntity.cpp:328
#: src/libslic3r/ExtrusionEntity.cpp:360 src/libslic3r/PrintConfig.cpp:647
#: src/libslic3r/PrintConfig.cpp:2039 src/libslic3r/PrintConfig.cpp:2048
#: src/libslic3r/PrintConfig.cpp:2057 src/libslic3r/PrintConfig.cpp:2067
#: src/libslic3r/PrintConfig.cpp:2076 src/libslic3r/PrintConfig.cpp:2498
#: src/libslic3r/PrintConfig.cpp:2504 src/libslic3r/PrintConfig.cpp:2512
#: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2535
#: src/libslic3r/PrintConfig.cpp:2543 src/libslic3r/PrintConfig.cpp:2561
#: src/libslic3r/PrintConfig.cpp:2578 src/libslic3r/PrintConfig.cpp:2599
#: src/libslic3r/PrintConfig.cpp:2612 src/libslic3r/PrintConfig.cpp:2629
#: src/libslic3r/PrintConfig.cpp:2647 src/libslic3r/PrintConfig.cpp:2662
#: src/libslic3r/PrintConfig.cpp:2672 src/libslic3r/PrintConfig.cpp:2681
#: src/libslic3r/PrintConfig.cpp:2692 src/libslic3r/PrintConfig.cpp:2706
#: src/libslic3r/PrintConfig.cpp:2722 src/libslic3r/PrintConfig.cpp:2730
#: src/libslic3r/PrintConfig.cpp:2731 src/libslic3r/PrintConfig.cpp:2740
#: src/libslic3r/PrintConfig.cpp:2754 src/libslic3r/PrintConfig.cpp:2762
#: src/libslic3r/PrintConfig.cpp:2776
msgid "Support material"
msgstr "서포트 재료(Support material)"

#: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135
#: src/libslic3r/PrintConfig.cpp:2998 src/libslic3r/PrintConfig.cpp:3006
msgid "Wipe options"
msgstr "지우기 옵션"

#: src/slic3r/GUI/GUI_Factories.cpp:65
msgid "Pad and Support"
msgstr "패드 및 서포트"

#: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/GUI_Preview.cpp:245
#: src/slic3r/GUI/Tab.cpp:1512 src/libslic3r/ExtrusionEntity.cpp:324
#: src/libslic3r/ExtrusionEntity.cpp:352 src/libslic3r/PrintConfig.cpp:1531
#: src/libslic3r/PrintConfig.cpp:1537 src/libslic3r/PrintConfig.cpp:1551
#: src/libslic3r/PrintConfig.cpp:1561 src/libslic3r/PrintConfig.cpp:1569
#: src/libslic3r/PrintConfig.cpp:1571
msgid "Ironing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1260
#: src/libslic3r/PrintConfig.cpp:1261 src/libslic3r/PrintConfig.cpp:1276
#: src/libslic3r/PrintConfig.cpp:1286
msgid "Fuzzy Skin"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/GUI_Preview.cpp:220
#: src/slic3r/GUI/Tab.cpp:1580 src/libslic3r/PrintConfig.cpp:484
#: src/libslic3r/PrintConfig.cpp:740 src/libslic3r/PrintConfig.cpp:1303
#: src/libslic3r/PrintConfig.cpp:1488 src/libslic3r/PrintConfig.cpp:1570
#: src/libslic3r/PrintConfig.cpp:1964 src/libslic3r/PrintConfig.cpp:2296
#: src/libslic3r/PrintConfig.cpp:2349 src/libslic3r/PrintConfig.cpp:2847
msgid "Speed"
msgstr "속도"

#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1619
#: src/slic3r/GUI/Tab.cpp:2270 src/libslic3r/PrintConfig.cpp:770
#: src/libslic3r/PrintConfig.cpp:1441 src/libslic3r/PrintConfig.cpp:1941
#: src/libslic3r/PrintConfig.cpp:2317 src/libslic3r/PrintConfig.cpp:2591
#: src/libslic3r/PrintConfig.cpp:2619
msgid "Extruders"
msgstr "익스트루더"

#: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:728
#: src/libslic3r/PrintConfig.cpp:838 src/libslic3r/PrintConfig.cpp:1195
#: src/libslic3r/PrintConfig.cpp:1449 src/libslic3r/PrintConfig.cpp:1950
#: src/libslic3r/PrintConfig.cpp:2337 src/libslic3r/PrintConfig.cpp:2600
#: src/libslic3r/PrintConfig.cpp:2834
msgid "Extrusion Width"
msgstr "압출 폭"

#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1532
#: src/libslic3r/PrintConfig.cpp:494 src/libslic3r/PrintConfig.cpp:505
#: src/libslic3r/PrintConfig.cpp:521
msgid "Skirt and brim"
msgstr "스커트와 브림"

#: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1491
#: src/slic3r/GUI/Tab.cpp:1524 src/slic3r/GUI/Tab.cpp:1641
#: src/slic3r/GUI/Tab.cpp:1645 src/slic3r/GUI/Tab.cpp:1997
#: src/slic3r/GUI/Tab.cpp:2364 src/slic3r/GUI/Tab.cpp:4386
#: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
#: src/libslic3r/PrintConfig.cpp:1390 src/libslic3r/PrintConfig.cpp:1477
#: src/libslic3r/PrintConfig.cpp:1524 src/libslic3r/PrintConfig.cpp:2474
#: src/libslic3r/PrintConfig.cpp:2484 src/libslic3r/PrintConfig.cpp:3022
#: src/libslic3r/PrintConfig.cpp:3218
msgid "Advanced"
msgstr "고급"

#: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
#: src/slic3r/GUI/Tab.cpp:4320 src/slic3r/GUI/Tab.cpp:4321
#: src/libslic3r/PrintConfig.cpp:3412 src/libslic3r/PrintConfig.cpp:3419
#: src/libslic3r/PrintConfig.cpp:3428 src/libslic3r/PrintConfig.cpp:3437
#: src/libslic3r/PrintConfig.cpp:3447 src/libslic3r/PrintConfig.cpp:3457
#: src/libslic3r/PrintConfig.cpp:3494 src/libslic3r/PrintConfig.cpp:3501
#: src/libslic3r/PrintConfig.cpp:3512 src/libslic3r/PrintConfig.cpp:3522
#: src/libslic3r/PrintConfig.cpp:3531 src/libslic3r/PrintConfig.cpp:3544
#: src/libslic3r/PrintConfig.cpp:3554 src/libslic3r/PrintConfig.cpp:3563
#: src/libslic3r/PrintConfig.cpp:3573 src/libslic3r/PrintConfig.cpp:3584
#: src/libslic3r/PrintConfig.cpp:3592
msgid "Supports"
msgstr "서포트"

#: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
#: src/slic3r/GUI/Tab.cpp:4361 src/slic3r/GUI/Tab.cpp:4362
#: src/slic3r/GUI/Tab.cpp:4434 src/libslic3r/PrintConfig.cpp:3600
#: src/libslic3r/PrintConfig.cpp:3607 src/libslic3r/PrintConfig.cpp:3621
#: src/libslic3r/PrintConfig.cpp:3632 src/libslic3r/PrintConfig.cpp:3642
#: src/libslic3r/PrintConfig.cpp:3664 src/libslic3r/PrintConfig.cpp:3675
#: src/libslic3r/PrintConfig.cpp:3682 src/libslic3r/PrintConfig.cpp:3689
#: src/libslic3r/PrintConfig.cpp:3700 src/libslic3r/PrintConfig.cpp:3709
#: src/libslic3r/PrintConfig.cpp:3718
msgid "Pad"
msgstr "패드"

#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4379
#: src/slic3r/GUI/Tab.cpp:4380 src/libslic3r/SLA/Hollowing.cpp:72
#: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
#: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3728
#: src/libslic3r/PrintConfig.cpp:3735 src/libslic3r/PrintConfig.cpp:3745
#: src/libslic3r/PrintConfig.cpp:3754
msgid "Hollowing"
msgstr "속이 빈 공동(Hollowing)"

#: src/slic3r/GUI/GUI_Factories.cpp:160
msgid "Add part"
msgstr "부품(Part) 추가"

#: src/slic3r/GUI/GUI_Factories.cpp:161
msgid "Add negative volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:162
msgid "Add modifier"
msgstr "편집영역(modifier) 추가"

#: src/slic3r/GUI/GUI_Factories.cpp:163
msgid "Add support blocker"
msgstr "서포트 금지영역(blocker) 추가"

#: src/slic3r/GUI/GUI_Factories.cpp:164
msgid "Add support enforcer"
msgstr "서포트 지원(enforcer)영역 추가"

#: src/slic3r/GUI/GUI_Factories.cpp:300
msgid "Select showing settings"
msgstr "표시된 설정을 선택 합니다"

#: src/slic3r/GUI/GUI_Factories.cpp:407 src/slic3r/GUI/GUI_Factories.cpp:412
#: src/slic3r/GUI/GUI_Factories.cpp:556 src/slic3r/GUI/GUI_Factories.cpp:562
#, c-format, boost-format
msgid "Quick Add Settings (%s)"
msgstr "빠른 추가 설정 (%s)"

#: src/slic3r/GUI/GUI_Factories.cpp:444
msgid "Remove the selected object"
msgstr "선택한 객체(object) 제거"

#: src/slic3r/GUI/GUI_Factories.cpp:456
msgid "Load"
msgstr "불러오기"

#: src/slic3r/GUI/GUI_Factories.cpp:461 src/slic3r/GUI/GUI_Factories.cpp:501
#: src/slic3r/GUI/GUI_Factories.cpp:505
msgid "Box"
msgstr "박스"

#: src/slic3r/GUI/GUI_Factories.cpp:461
msgid "Cylinder"
msgstr "원통"

#: src/slic3r/GUI/GUI_Factories.cpp:461
msgid "Slab"
msgstr "슬랩"

#: src/slic3r/GUI/GUI_Factories.cpp:471
msgid "Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:488 src/slic3r/GUI/GUI_Factories.cpp:526
msgid "Height range Modifier"
msgstr "높이 범위에 대한 설정"

#: src/slic3r/GUI/GUI_Factories.cpp:535
msgid "Add settings"
msgstr "다음 설정"

#: src/slic3r/GUI/GUI_Factories.cpp:626
msgid "Change type"
msgstr "타입 변경"

#: src/slic3r/GUI/GUI_Factories.cpp:636 src/slic3r/GUI/GUI_Factories.cpp:648
msgid "Set as a Separated Object"
msgstr "분리 된 객체(object)로 설정"

#: src/slic3r/GUI/GUI_Factories.cpp:648
msgid "Set as a Separated Objects"
msgstr "분리된 객체(object)로 설정"

#: src/slic3r/GUI/GUI_Factories.cpp:658
msgid "Printable"
msgstr "인쇄가능"

#: src/slic3r/GUI/GUI_Factories.cpp:686
msgid "Rename"
msgstr "이름 변경"

#: src/slic3r/GUI/GUI_Factories.cpp:696
msgid "Fix through the Netfabb"
msgstr "Netfabb를 통해 수정"

#: src/slic3r/GUI/GUI_Factories.cpp:715
msgid "Export as STL"
msgstr "STL로 내보내기"

#: src/slic3r/GUI/GUI_Factories.cpp:726
msgid "Reload the selected volumes from disk"
msgstr "디스크에서 선택한 볼륨 다시 로드"

#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3485
msgid "Replace with STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:733
msgid "Replace the selected volume with new STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:740
msgid "Set extruder for selected items"
msgstr "선택한 항목에 대한 압출기(익스트루더) 설정"

#: src/slic3r/GUI/GUI_Factories.cpp:778 src/slic3r/Utils/Repetier.cpp:126
#: src/slic3r/Utils/Repetier.cpp:209 src/libslic3r/PrintConfig.cpp:612
#: src/libslic3r/PrintConfig.cpp:2714
msgid "Default"
msgstr "기본값"

#: src/slic3r/GUI/GUI_Factories.cpp:796 src/slic3r/GUI/GUI_Factories.cpp:800
msgid "Scale to print volume"
msgstr "인쇄 볼륨에 따라 배율 조정"

#: src/slic3r/GUI/GUI_Factories.cpp:796 src/slic3r/GUI/GUI_Factories.cpp:800
msgid "Scale the selected object to fit the print volume"
msgstr "인쇄 볼륨에 맞게 선택한 객체(object)의 배율 조정"

#: src/slic3r/GUI/GUI_Factories.cpp:840 src/slic3r/GUI/Plater.cpp:5555
msgid "Convert from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:841 src/slic3r/GUI/Plater.cpp:5556
msgid "Revert conversion from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:842 src/slic3r/GUI/Plater.cpp:5557
msgid "Convert from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:843 src/slic3r/GUI/Plater.cpp:5557
msgid "Revert conversion from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:864 src/slic3r/GUI/GUI_ObjectList.cpp:2133
#: src/libslic3r/PrintConfig.cpp:4365
msgid "Merge"
msgstr "병합"

#: src/slic3r/GUI/GUI_Factories.cpp:864
msgid "Merge objects to the one multipart object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:883
msgid "Along X axis"
msgstr "X 축을 따라"

#: src/slic3r/GUI/GUI_Factories.cpp:883
msgid "Mirror the selected object along the X axis"
msgstr "선택한 객체(object)를 X 축을 따라 반전합니다"

#: src/slic3r/GUI/GUI_Factories.cpp:885
msgid "Along Y axis"
msgstr "Y 축을 따라"

#: src/slic3r/GUI/GUI_Factories.cpp:885
msgid "Mirror the selected object along the Y axis"
msgstr "선택한 객체(object)를 Y 축을 따라 반전합니다"

#: src/slic3r/GUI/GUI_Factories.cpp:887
msgid "Along Z axis"
msgstr "Z 축 따라"

#: src/slic3r/GUI/GUI_Factories.cpp:887
msgid "Mirror the selected object along the Z axis"
msgstr "선택한 객체(object)를 Z 축을 따라 반전합니다"

#: src/slic3r/GUI/GUI_Factories.cpp:890
msgid "Mirror"
msgstr "반전(Mirror)"

#: src/slic3r/GUI/GUI_Factories.cpp:890
msgid "Mirror the selected object"
msgstr "반전할 객제를 선택"

#: src/slic3r/GUI/GUI_Factories.cpp:906 src/slic3r/GUI/GUI_ObjectList.cpp:1696
msgid "Add Shape"
msgstr "모양 추가"

#: src/slic3r/GUI/GUI_Factories.cpp:942
msgid "To objects"
msgstr "객체(object)에"

#: src/slic3r/GUI/GUI_Factories.cpp:942 src/slic3r/GUI/GUI_Factories.cpp:959
msgid "Split the selected object into individual objects"
msgstr "선택한 객체(object)를 개별 객체(object)로 분할 합니다."

#: src/slic3r/GUI/GUI_Factories.cpp:945
msgid "To parts"
msgstr "부품(Part)에"

#: src/slic3r/GUI/GUI_Factories.cpp:945 src/slic3r/GUI/GUI_Factories.cpp:980
msgid "Split the selected object into individual parts"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:949 src/slic3r/GUI/GUI_Factories.cpp:959
#: src/slic3r/GUI/GUI_Factories.cpp:980 src/libslic3r/PrintConfig.cpp:4394
msgid "Split"
msgstr "쪼개기"

#: src/slic3r/GUI/GUI_Factories.cpp:949
msgid "Split the selected object"
msgstr "선택한 객체(object) 분할"

#: src/slic3r/GUI/GUI_Factories.cpp:1089
msgid "Add one more instance of the selected object"
msgstr "선택한 개체의 인스턴스를 하나 더 추가합니다."

#: src/slic3r/GUI/GUI_Factories.cpp:1092
msgid "Remove one instance of the selected object"
msgstr "선택한 개체의 인스턴스 하나 제거"

#: src/slic3r/GUI/GUI_Factories.cpp:1095
msgid "Set number of instances"
msgstr "복제할 수량 설정"

#: src/slic3r/GUI/GUI_Factories.cpp:1095
msgid "Change the number of instances of the selected object"
msgstr "선택한 객체의 인스턴스 수 변경"

#: src/slic3r/GUI/GUI_Factories.cpp:1099
msgid "Fill bed with instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1099
msgid "Fill the remaining area of bed with instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Start at height"
msgstr "높이에서 시작"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Stop at height"
msgstr "높이에서 정지"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:160
msgid "Remove layer range"
msgstr "레이어 범위 제거"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
msgid "Add layer range"
msgstr "레이어 범위 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:297
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:139
msgid "Name"
msgstr "이름"

#: src/slic3r/GUI/GUI_ObjectList.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:479
msgid "Editing"
msgstr "편집"

#: src/slic3r/GUI/GUI_ObjectList.cpp:399
msgid "No errors detected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:408
#, c-format, boost-format
msgid "Auto-repaired %1$d error"
msgid_plural "Auto-repaired %1$d errors"
msgstr[0] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:414
#, c-format, boost-format
msgid "%1$d degenerate facet"
msgid_plural "%1$d degenerate facets"
msgstr[0] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:416
#, c-format, boost-format
msgid "%1$d edge fixed"
msgid_plural "%1$d edges fixed"
msgstr[0] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:418
#, c-format, boost-format
msgid "%1$d facet removed"
msgid_plural "%1$d facets removed"
msgstr[0] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:420
#, c-format, boost-format
msgid "%1$d facet reversed"
msgid_plural "%1$d facets reversed"
msgstr[0] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:422
#, c-format, boost-format
msgid "%1$d backward edge"
msgid_plural "%1$d backward edges"
msgstr[0] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:425 src/slic3r/GUI/GUI_ObjectList.cpp:428
#, c-format, boost-format
msgid "%1$d open edge"
msgid_plural "%1$d open edges"
msgstr[0] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:427
msgid "Remaining errors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:435
msgid "Right button click the icon to fix STL through Netfabb"
msgstr "아이콘을 클릭 하여 Netfabb에서 STL을 수정 합니다"

#: src/slic3r/GUI/GUI_ObjectList.cpp:481
msgid "Right button click the icon to change the object settings"
msgstr "아이콘을 클릭 하여 객체(object) 설정을 변경 합니다"

#: src/slic3r/GUI/GUI_ObjectList.cpp:483
msgid "Click the icon to change the object settings"
msgstr "아이콘을 클릭 하여 오브젝트 설정을 변경 합니다"

#: src/slic3r/GUI/GUI_ObjectList.cpp:487
msgid "Right button click the icon to change the object printable property"
msgstr "오른쪽 버튼이 아이콘을 클릭하여 객체 인쇄 가능한 속성을 변경합니다."

#: src/slic3r/GUI/GUI_ObjectList.cpp:489
msgid "Click the icon to change the object printable property"
msgstr "아이콘을 클릭하여 객체 인쇄 가능 속성을 변경합니다."

#: src/slic3r/GUI/GUI_ObjectList.cpp:615
msgid "Change Extruder"
msgstr "압출기(익스트루더) 변경"

#: src/slic3r/GUI/GUI_ObjectList.cpp:630
msgid "Rename Object"
msgstr "객체(object) 이름 바꾸기"

#: src/slic3r/GUI/GUI_ObjectList.cpp:630
msgid "Rename Sub-object"
msgstr "하위 객체(object) 이름 바꾸기"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1241
#: src/slic3r/GUI/GUI_ObjectList.cpp:3997
msgid "Instances to Separated Objects"
msgstr "분리된 객체(object)에 대한 복제본"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1247
msgid "Volumes in Object reordered"
msgstr "개체의 볼륨이 재정렬되었습니다."

#: src/slic3r/GUI/GUI_ObjectList.cpp:1247
msgid "Object reordered"
msgstr "개체 순서가 다시 지정되었습니다."

#: src/slic3r/GUI/GUI_ObjectList.cpp:1297
msgid "Add Settings for Layers"
msgstr "레이어 설정 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1298
msgid "Add Settings for Sub-object"
msgstr "하위 객체(object)에 대한 설정 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1299
msgid "Add Settings for Object"
msgstr "객체(object)에 대한 설정 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1338
msgid "Add Settings Bundle for Height range"
msgstr "높이 범위에 대한 설정 번들 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
msgid "Add Settings Bundle for Sub-object"
msgstr "하위 객체(object)에 대한 번들 설정을 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1340
msgid "Add Settings Bundle for Object"
msgstr "객체(object)에 대한 번들 설정을 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1411
msgid "Load Part"
msgstr "부품(Part)을 불러 오기"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1411
msgid "Load Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1509 src/slic3r/GUI/Plater.cpp:2356
msgid "Loading"
msgstr "로딩"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2376
msgid "Loading file"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1548
msgid "Error!"
msgstr "에러!"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1638
msgid "Add Generic Subobject"
msgstr "기본이 되는 하위 객체(object) 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1663
msgid "Generic"
msgstr "일반"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1727
msgid "Add Shape from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1727
msgid "Add Shapes from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1830
msgid "Remove paint-on supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1837
msgid "Remove paint-on seam"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1844
msgid "Remove Multi Material painting"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1850
msgid "Shift objects to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1856
msgid "Remove variable layer height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1877
msgid "Delete Settings"
msgstr "설정 삭제"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1901
msgid "Delete All Instances from Object"
msgstr "객체(object)에서 모든 복제본 삭제"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1917
msgid "Delete Height Range"
msgstr "높이 범위 삭제"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1949
msgid "From Object List You can't delete the last solid part from object."
msgstr "객체(object) 리스트에서 마지막 부품(Part)을 삭제할 수 없습니다."

#: src/slic3r/GUI/GUI_ObjectList.cpp:1953
msgid "Delete Subobject"
msgstr "하위 객체(object) 삭제"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1976
msgid "Last instance of an object cannot be deleted."
msgstr "객체(object)의 마지막 복제본를 삭제할 수 없습니다."

#: src/slic3r/GUI/GUI_ObjectList.cpp:1980
msgid "Delete Instance"
msgstr "복제본 삭제"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2004
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""
"선택한 객체(object)는 부품(Part) 하나만 포함되어 있기 때문에 분할 할 수 없습"
"니다."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2008
msgid "Split to Parts"
msgstr "부품(Part)으로 분할"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2140
msgid "Merged"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2228
msgid "Merge all parts to the one single object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2260
msgid "Add Layers"
msgstr "레이어 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2429
msgid "Group manipulation"
msgstr "그룹 조작"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2444
msgid "Object manipulation"
msgstr "객체(object) 조작"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2477
msgid "Object Settings to modify"
msgstr "수정할 객체(object) 설정"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2481
msgid "Part Settings to modify"
msgstr "수정할 부품(Part) 설정"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2486
msgid "Layer range Settings to modify"
msgstr "레이어 범위 설정 수정"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2492
msgid "Part manipulation"
msgstr "부품(Part) 조작"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2498
msgid "Instance manipulation"
msgstr "복제본 제거"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2505
msgid "Height ranges"
msgstr "높이 범위"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2505
msgid "Settings for height range"
msgstr "높이 범위에 대한 설정"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2741
msgid "Delete Selected Item"
msgstr "선택한 항목(item) 삭제"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2934
msgid "Delete Selected"
msgstr "선택된 것 삭제"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3010
#: src/slic3r/GUI/GUI_ObjectList.cpp:3038
#: src/slic3r/GUI/GUI_ObjectList.cpp:3058
msgid "Add Height Range"
msgstr "높이 범위 추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3104
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3108
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3113
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3172
msgid "Edit Height Range"
msgstr "높이 범위 편집"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3491
msgid "Selection-Remove from list"
msgstr "목록에서 선택-제거"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3503
msgid "Selection-Add from list"
msgstr "목록에서 선택-추가"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3640
msgid "Object or Instance"
msgstr "객체(object) 또는 복제본"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3641
#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Part"
msgstr "부품(Part)(Part)"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3641
msgid "Layer"
msgstr "레이어"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3643
msgid "Unsupported selection"
msgstr "지원 되지 않는 선택"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3644
#, c-format, boost-format
msgid "You started your selection with %s Item."
msgstr "%s 선택된 항목으로 시작합니다."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3645
#, c-format, boost-format
msgid "In this mode you can select only other %s Items%s"
msgstr "이 모드에서는 %s의 다른 %s 항목만 선택할 수 있습니다"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3648
msgid "of a current Object"
msgstr "현재 객체(object)의"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3653
#: src/slic3r/GUI/GUI_ObjectList.cpp:3728 src/slic3r/GUI/Plater.cpp:181
msgid "Info"
msgstr "정보"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3775
msgid "You can't change a type of the last solid part of the object."
msgstr "객체(object)의 마지막 부품(Part) 유형은 변경할 수 없습니다."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Negative Volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Modifier"
msgstr "편집 영역"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Support Blocker"
msgstr "서포트 금지 영역"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Support Enforcer"
msgstr "서포트 지원 영역"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3781
msgid "Select type of part"
msgstr "부품(Part) 유형 선택"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3786
msgid "Change Part Type"
msgstr "부품(Part) 유형 변경"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4019
msgid "Enter new name"
msgstr "새 이름 입력"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4019
msgid "Renaming"
msgstr "이름 바꾸기"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4082
msgid "Repairing model"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4111
msgid "Fix through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4114
msgid "Fixing through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4144
msgid "The following model was repaired successfully"
msgid_plural "The following models were repaired successfully"
msgstr[0] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4150
msgid "Folowing model repair failed"
msgid_plural "Folowing models repair failed"
msgstr[0] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4155
msgid "Repairing was canceled"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4267
msgid "Change Extruders"
msgstr "돌출기 변경"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4407
msgid "Set Printable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4407
msgid "Set Unprintable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4409
msgid "Set Printable"
msgstr "인쇄 가능 설정"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4409
msgid "Set Unprintable"
msgstr "인쇄할 수 없는 설정"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4410
msgid "Set Printable Instance"
msgstr "인쇄 가능한 인스턴스 설정"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4410
msgid "Set Unprintable Instance"
msgstr "인쇄할 수 없는 인스턴스 설정"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:55
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84
msgid "World coordinates"
msgstr "전체크기와 좌표"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:56
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:85
msgid "Local coordinates"
msgstr "로컬 좌표"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60
msgid "Select coordinate space, in which the transformation will be performed."
msgstr "변환이 수행될 좌표 공간을 선택 합니다."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:141 src/libslic3r/GCode.cpp:525
msgid "Object name"
msgstr "객체(object) 이름"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:201
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:521
msgid "Position"
msgstr "위치"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:202
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:522
#: src/slic3r/GUI/Mouse3DController.cpp:478
#: src/slic3r/GUI/Mouse3DController.cpp:499
msgid "Rotation"
msgstr "회전"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:250
#, c-format, boost-format
msgid "Toggle %c axis mirroring"
msgstr "전환 %c 축 미러링"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284
msgid "Set Mirror"
msgstr "미러 설정"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:336
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:348
msgid "Drop to bed"
msgstr "배드를 아래로 내리기"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363
msgid "Reset rotation"
msgstr "회전 재설정"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385
msgid "Reset Rotation"
msgstr "회전 재설정"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:398
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:400
msgid "Reset scale"
msgstr "크기 재설정"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:414
msgid "Inches"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:523
msgid "Scale factors"
msgstr "축척 계수"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:577
msgid "Translate"
msgstr "번역"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""
"여러 객체/부품 선택에 는 균일하지 않은 배율 조정 모드를 사용할 수 없습니다."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:820
msgid "Set Position"
msgstr "위치 설정"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:852
msgid "Set Orientation"
msgstr "방향 설정"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:931
msgid "Set Scale"
msgstr "축척 설정"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:980
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""
"현재 조작 된 객체(object)가 기울어져 있습니다 (회전 각도가 90°의 배수가 아"
"님).\n"
"기울어진 객체(object)의 배율 조정은 기본 좌표에서만 가능 합니다."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:983
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""
"이 작업은 되돌릴수 없습니다.\n"
"계속 하시겠습니까?"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:63
msgid "Additional Settings"
msgstr "추가적인 세팅"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:99
msgid "Remove parameter"
msgstr "매개 변수 제거"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:105
#, c-format, boost-format
msgid "Delete Option %s"
msgstr "삭제 %s 옵션"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
#, c-format, boost-format
msgid "Change Option %s"
msgstr "옵션 %s 변경"

#: src/slic3r/GUI/GUI_Preview.cpp:211
msgid "View"
msgstr "보기"

#: src/slic3r/GUI/GUI_Preview.cpp:218 src/libslic3r/PrintConfig.cpp:782
msgid "Height"
msgstr "높이"

#: src/slic3r/GUI/GUI_Preview.cpp:219 src/libslic3r/PrintConfig.cpp:2976
msgid "Width"
msgstr "폭"

#: src/slic3r/GUI/GUI_Preview.cpp:221 src/slic3r/GUI/Tab.cpp:1982
msgid "Fan speed"
msgstr "팬 속도"

#: src/slic3r/GUI/GUI_Preview.cpp:222 src/slic3r/GUI/Tab.cpp:1957
msgid "Temperature"
msgstr "온도"

#: src/slic3r/GUI/GUI_Preview.cpp:223
msgid "Volumetric flow rate"
msgstr "용적의 유량값"

#: src/slic3r/GUI/GUI_Preview.cpp:228
msgid "Show"
msgstr "보다"

#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/GUI_Preview.cpp:254
msgid "Feature types"
msgstr "특색 유형"

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:318
#: src/libslic3r/ExtrusionEntity.cpp:340
msgid "Perimeter"
msgstr "가장자리"

#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:319
#: src/libslic3r/ExtrusionEntity.cpp:342
msgid "External perimeter"
msgstr "외부 가장자리"

#: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:320
#: src/libslic3r/ExtrusionEntity.cpp:344
msgid "Overhang perimeter"
msgstr "오버행(Overhang) 둘레"

#: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:321
#: src/libslic3r/ExtrusionEntity.cpp:346
msgid "Internal infill"
msgstr "내부 채움"

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:322
#: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:2336
#: src/libslic3r/PrintConfig.cpp:2348
msgid "Solid infill"
msgstr "솔리드 인필"

#: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:323
#: src/libslic3r/ExtrusionEntity.cpp:350 src/libslic3r/PrintConfig.cpp:2833
#: src/libslic3r/PrintConfig.cpp:2846
msgid "Top solid infill"
msgstr "가장 윗부분 채움"

#: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/ExtrusionEntity.cpp:325
#: src/libslic3r/ExtrusionEntity.cpp:354
msgid "Bridge infill"
msgstr "브릿지 채움"

#: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/ExtrusionEntity.cpp:326
#: src/libslic3r/ExtrusionEntity.cpp:356 src/libslic3r/PrintConfig.cpp:1302
msgid "Gap fill"
msgstr "공백 채움"

#: src/slic3r/GUI/GUI_Preview.cpp:248 src/libslic3r/ExtrusionEntity.cpp:327
#: src/libslic3r/ExtrusionEntity.cpp:358
msgid "Skirt/Brim"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:250 src/libslic3r/ExtrusionEntity.cpp:329
#: src/libslic3r/ExtrusionEntity.cpp:362 src/libslic3r/PrintConfig.cpp:2680
msgid "Support material interface"
msgstr "서포트 접점"

#: src/slic3r/GUI/GUI_Preview.cpp:251 src/slic3r/GUI/Tab.cpp:1630
#: src/libslic3r/ExtrusionEntity.cpp:330 src/libslic3r/ExtrusionEntity.cpp:364
msgid "Wipe tower"
msgstr "와이프 타워(Wipe tower)"

#: src/slic3r/GUI/GUI_Preview.cpp:728
msgid "NOTE:"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:729
#, boost-format
msgid "Sliced object \"%1%\" looks like a logo or a sign"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:730
msgid "Apply color change automatically"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1057
msgid "Shells"
msgstr "쉘(Shells)"

#: src/slic3r/GUI/GUI_Preview.cpp:1058
msgid "Tool marker"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1059
msgid "Legend/Estimated printing time"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:767
#: src/slic3r/GUI/HintNotification.cpp:793
#: src/slic3r/GUI/NotificationManager.cpp:374
#: src/slic3r/GUI/NotificationManager.cpp:391
msgid "More"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:908
msgid "Open Preferences."
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:1000
msgid "Open Documentation in web browser."
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:532
msgid "Edit"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:985 src/slic3r/GUI/Search.cpp:479
msgid "Use for search"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:986 src/slic3r/GUI/Search.cpp:472
msgid "Category"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:988 src/slic3r/GUI/Search.cpp:474
msgid "Search in English"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:171
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""
"모델 객체(object)를 정렬할 수 없습니다. 일부 형상은 유효 하지 않을 수 있습니"
"다."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:180
msgid "Arranging"
msgstr "정렬"

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:204
msgid "Arranging canceled."
msgstr "취소 된 정렬"

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:205
msgid "Arranging done."
msgstr "정렬 완료."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:250
#, c-format, boost-format
msgid ""
"Arrangement ignored the following objects which can't fit into a single "
"bed:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:123
msgid "Filling bed"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:134
msgid "Bed filling canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:135
msgid "Bed filling done."
msgstr ""

#: src/slic3r/GUI/Jobs/Job.cpp:111
msgid "ERROR: not enough resources to execute a new job."
msgstr "오류: 새 작업을 실행하기에 충분한 리소스가 없습니다."

#: src/slic3r/GUI/Jobs/PlaterJob.cpp:13
msgid "An unexpected error occured"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:59
msgid "Searching for optimal orientation"
msgstr "최적의 방향 검색"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:77
msgid "Orientation search canceled."
msgstr "방향 검색이 취소되었습니다."

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:78
msgid "Orientation found."
msgstr "방향을 찾았습니다."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:36
msgid "Choose SLA archive:"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:40
msgid "Import file"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47
msgid "Import model and profile"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48
msgid "Import profile only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49
msgid "Import model only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60
msgid "Accurate"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61
msgid "Balanced"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:62
msgid "Quick"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:140
msgid "Importing SLA archive"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:158
msgid ""
"The SLA archive doesn't contain any presets. Please activate some SLA "
"printer preset first before importing that SLA archive."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:164
msgid "Importing canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:165
msgid "Importing done."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
msgid ""
"The imported SLA archive did not contain any presets. The current SLA "
"presets were used as fallback."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2403
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr ""
"배드에 여러 부분으로 구성된 객체가 있는 SLA 프로젝트를 로드할 수 없습니다."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2405
msgid "Attention!"
msgstr "주목!"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1100
msgid "Keyboard Shortcuts"
msgstr "키보드 단축기"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:77
msgid "New project, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:78
msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:79
msgid "Save project (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:80
msgid "Save project as (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:81
msgid "(Re)slice"
msgstr "(Re)슬라이스"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:83
msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:84
msgid "Import Config from ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:85
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
#: src/slic3r/GUI/Plater.cpp:6453 src/libslic3r/PrintConfig.cpp:4265
msgid "Export G-code"
msgstr "G-code 내보내기"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6454
msgid "Send G-code"
msgstr "G-code 보내기"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:89
msgid "Export config"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:90 src/slic3r/GUI/Plater.cpp:895
msgid "Export to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:91
msgid "Eject SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
msgid "Select all objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
msgid "Deselect all"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:95
msgid "Delete selected"
msgstr "선택 삭제"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:99
msgid "Copy to clipboard"
msgstr "클립보드로 복사"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
msgid "Paste from clipboard"
msgstr "클립보드에서 붙여넣기"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
msgid "Reload plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Select Plater Tab"
msgstr "선택 및 플래이터 탭"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Select Print Settings Tab"
msgstr "인쇄 설정을 선택 합니다"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
msgid "Select Filament Settings Tab"
msgstr "필라멘트 설정을 선택"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Select Printer Settings Tab"
msgstr "프린터 설정을 선택 합니다"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Switch to 3D"
msgstr "3D로 전환"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "Switch to Preview"
msgstr "미리 보기로 전환"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
#: src/slic3r/GUI/PrintHostDialogs.cpp:216
msgid "Print host upload queue"
msgstr "프린터 호스트 업로드 대기"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/MainFrame.cpp:75
msgid "Open new instance"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
msgid "Camera view"
msgstr "카메라 뷰"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Show/Hide object/instance labels"
msgstr "개체/인스턴스 레이블 표시/숨기기"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
#: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:46
msgid "Preferences"
msgstr "기본 설정"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Show keyboard shortcuts list"
msgstr "단축 키 목록 표시"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
msgid "Commands"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
msgid "Add Instance of the selected object"
msgstr "선택한 객체(object)의 복제본 추가"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Remove Instance of the selected object"
msgstr "선택한 객체(object)의 복제본 제거"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Press to activate selection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Press to activate deselection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
msgid "Arrow Up"
msgstr "위쪽 화살표"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Move selection 10 mm in positive Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
#: src/slic3r/GUI/KBShortcutsDialog.cpp:234
#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Arrow Down"
msgstr "아래쪽 화살표"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Move selection 10 mm in negative Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Arrow Left"
msgstr "왼쪽 화살표"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Move selection 10 mm in negative X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Arrow Right"
msgstr "오른쪽 화살표"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Move selection 10 mm in positive X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Any arrow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Movement step set to 1 mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Movement in camera space"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Page Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Rotate selection 45 degrees CCW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Page Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Rotate selection 45 degrees CW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Gizmo move"
msgstr "개체(Gizmo) 이동"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Gizmo scale"
msgstr "개체(Gizmo) 배율"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Gizmo rotate"
msgstr "개체(Gizmo) 회전"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
msgid "Gizmo cut"
msgstr "개체(Gizmo) 자르기"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Gizmo Place face on bed"
msgstr "개체(Gizmo)를 배드위로"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Gizmo SLA hollow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Gizmo SLA support points"
msgstr "SLA 개체(Gizmo) 서포트 지점들"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Gizmo FDM paint-on supports"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Gizmo FDM paint-on seam"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Gizmo Multi Material painting"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Unselect gizmo or clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Change camera type (perspective, orthographic)"
msgstr "카메라 유형 변경(원근, 직교)"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Zoom to Bed"
msgstr "배드 확대"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Zoom in"
msgstr "확대"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Zoom out"
msgstr "축소"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Switch between Editor/Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Collapse/Expand the sidebar"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr "3Dconnexion 장치 설정 대화 상자 표시/숨기기"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "Minimize application"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:181 src/slic3r/GUI/MainFrame.cpp:284
#: src/slic3r/GUI/MainFrame.cpp:333 src/slic3r/GUI/MainFrame.cpp:445
#: src/slic3r/GUI/MainFrame.cpp:448 src/slic3r/GUI/MainFrame.cpp:470
#: src/slic3r/GUI/MainFrame.cpp:473
msgid "Plater"
msgstr "플레이터"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
msgid "Gizmo move: Press to snap by 1mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
msgid "Gizmo scale: Press to snap by 5%"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:188
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid "Gizmos"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid ""
"The following shortcuts are applicable when the specified gizmo is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Set selected items as Printable/Unprintable"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Set default extruder for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Set extruder number for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Objects List"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:205 src/slic3r/GUI/MainFrame.cpp:1518
msgid "Open a G-code file"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:207 src/slic3r/GUI/MainFrame.cpp:1352
#: src/slic3r/GUI/MainFrame.cpp:1356 src/slic3r/GUI/MainFrame.cpp:1523
#: src/slic3r/GUI/MainFrame.cpp:1527
msgid "Reload the plater from disk"
msgstr "디스크에서 플래터 다시 로드"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
msgid "Vertical slider - Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
msgid "Vertical slider - Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
msgid "Horizontal slider - Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
msgid "Horizontal slider - Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
msgid "On/Off one layer mode of the vertical slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
msgid "Show/Hide Legend and Estimated printing time"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
msgid "Show/Hide G-code window"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4394
#: src/slic3r/GUI/Tab.cpp:2791
msgid "Preview"
msgstr "미리보기"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
msgid "Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:234
msgid "Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
msgid "Set upper thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
msgid "Set lower thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
msgid "Add color change marker for current layer"
msgstr "현재 레이어의 색상을 변경할 마커 추가"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:238
msgid "Delete color change marker for current layer"
msgstr "현재 레이어의 색상을 변경할 마커 삭제"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
#: src/slic3r/GUI/KBShortcutsDialog.cpp:250
#: src/slic3r/GUI/KBShortcutsDialog.cpp:251
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Vertical Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid ""
"The following shortcuts are applicable in G-code preview when the vertical "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
msgid "Set left thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Set right thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Horizontal Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid ""
"The following shortcuts are applicable in G-code preview when the horizontal "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:278
msgid "Keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:75 src/slic3r/GUI/MainFrame.cpp:89
#: src/slic3r/GUI/MainFrame.cpp:1413
msgid "Open a new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:91
msgid "G-code preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:1301
msgid "Open G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:89 src/slic3r/GUI/MainFrame.cpp:1534
msgid "Open PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:91
msgid "Open new G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:225
msgid "Closing PrusaSlicer. Current project is modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:232
msgid "PrusaSlicer is closing"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:232
msgid "Closing PrusaSlicer while some presets are modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
#: src/slic3r/GUI/Tab.hpp:376 src/slic3r/GUI/Tab.hpp:494
msgid "Print Settings"
msgstr "출력 설정"

#: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
#: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
#: src/slic3r/GUI/Tab.hpp:479
msgid "Material Settings"
msgstr "재질 설정"

#: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
#: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
#: src/slic3r/GUI/Tab.hpp:406
msgid "Filament Settings"
msgstr "필라멘트 설정"

#: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
#: src/slic3r/GUI/Tab.hpp:447
msgid "Printer Settings"
msgstr "프린터 설정"

#: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
#: src/slic3r/GUI/Plater.cpp:2795
msgid "Untitled"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:655
msgid "based on Slic3r"
msgstr "Slic3r 기반"

#: src/slic3r/GUI/MainFrame.cpp:1070
msgid "Prusa 3D &Drivers"
msgstr "푸르사 3D 드라이버"

#: src/slic3r/GUI/MainFrame.cpp:1070
msgid "Open the Prusa3D drivers download page in your browser"
msgstr "브라우저에서 Prusa3D 드라이버 다운로드 페이지를 엽니다"

#: src/slic3r/GUI/MainFrame.cpp:1072
msgid "Software &Releases"
msgstr "소프트웨어 &자료"

#: src/slic3r/GUI/MainFrame.cpp:1072
msgid "Open the software releases page in your browser"
msgstr "브라우저에서 소프트웨어 정보 페이지 열기"

#: src/slic3r/GUI/MainFrame.cpp:1078
#, c-format, boost-format
msgid "%s &Website"
msgstr "%s &웹사이트"

#: src/slic3r/GUI/MainFrame.cpp:1079
#, c-format, boost-format
msgid "Open the %s website in your browser"
msgstr "%s 웹사이트를 브라우저에서 열기"

#: src/slic3r/GUI/MainFrame.cpp:1085
msgid "System &Info"
msgstr "시스템 정보"

#: src/slic3r/GUI/MainFrame.cpp:1085
msgid "Show system information"
msgstr "시스템 정보 표시"

#: src/slic3r/GUI/MainFrame.cpp:1087
msgid "Show &Configuration Folder"
msgstr "폴더 표시 및 구성"

#: src/slic3r/GUI/MainFrame.cpp:1087
msgid "Show user configuration folder (datadir)"
msgstr "사용자 구성 폴더를 표시 (datadir)"

#: src/slic3r/GUI/MainFrame.cpp:1089
msgid "Report an I&ssue"
msgstr "문제를 보고"

#: src/slic3r/GUI/MainFrame.cpp:1089
#, c-format, boost-format
msgid "Report an issue on %s"
msgstr "%s에 문제 보고"

#: src/slic3r/GUI/MainFrame.cpp:1092 src/slic3r/GUI/MainFrame.cpp:1095
#, c-format, boost-format
msgid "&About %s"
msgstr "%s 에 대하여"

#: src/slic3r/GUI/MainFrame.cpp:1092 src/slic3r/GUI/MainFrame.cpp:1095
msgid "Show about dialog"
msgstr "다이얼로그 표시"

#: src/slic3r/GUI/MainFrame.cpp:1097
msgid "Show Tip of the Day"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1097
msgid ""
"Opens Tip of the day notification in bottom right corner or shows another "
"tip if already opened."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1100
msgid "Show the list of the keyboard shortcuts"
msgstr "키보드 단축키 목록 표시"

#: src/slic3r/GUI/MainFrame.cpp:1114
msgid "Iso"
msgstr "기본 "

#: src/slic3r/GUI/MainFrame.cpp:1114
msgid "Iso View"
msgstr "표준 보기"

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1118 src/libslic3r/PrintConfig.cpp:2861
#: src/libslic3r/PrintConfig.cpp:2870
msgid "Top"
msgstr "윗부분 "

#: src/slic3r/GUI/MainFrame.cpp:1118
msgid "Top View"
msgstr "위에서 보기"

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1121 src/libslic3r/PrintConfig.cpp:423
#: src/libslic3r/PrintConfig.cpp:432
msgid "Bottom"
msgstr "바닥 "

#: src/slic3r/GUI/MainFrame.cpp:1121
msgid "Bottom View"
msgstr "바닥 보기"

#: src/slic3r/GUI/MainFrame.cpp:1123
msgid "Front"
msgstr "앞 "

#: src/slic3r/GUI/MainFrame.cpp:1123
msgid "Front View"
msgstr "앞면 보기 "

#: src/slic3r/GUI/MainFrame.cpp:1125 src/libslic3r/PrintConfig.cpp:2218
msgid "Rear"
msgstr "뒷면 "

#: src/slic3r/GUI/MainFrame.cpp:1125
msgid "Rear View"
msgstr "뒷면 보기"

#: src/slic3r/GUI/MainFrame.cpp:1127
msgid "Left"
msgstr "왼쪽 "

#: src/slic3r/GUI/MainFrame.cpp:1127
msgid "Left View"
msgstr "왼쪽 보기"

#: src/slic3r/GUI/MainFrame.cpp:1129
msgid "Right"
msgstr "오른쪽 "

#: src/slic3r/GUI/MainFrame.cpp:1129
msgid "Right View"
msgstr "오른쪽 보기"

#: src/slic3r/GUI/MainFrame.cpp:1142
msgid "&New Project"
msgstr "&새로운 프로젝트"

#: src/slic3r/GUI/MainFrame.cpp:1142
msgid "Start a new project"
msgstr "새로운 프로젝트 시작"

#: src/slic3r/GUI/MainFrame.cpp:1145
msgid "&Open Project"
msgstr "&프로젝트 열기"

#: src/slic3r/GUI/MainFrame.cpp:1145
msgid "Open a project file"
msgstr "프로젝트 파일 열기"

#: src/slic3r/GUI/MainFrame.cpp:1150
msgid "Recent projects"
msgstr "최근 프로젝트"

#: src/slic3r/GUI/MainFrame.cpp:1162
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1187
msgid "&Save Project"
msgstr "프로젝트 저장"

#: src/slic3r/GUI/MainFrame.cpp:1187
msgid "Save current project file"
msgstr "현재 프로젝트 파일 저장"

#: src/slic3r/GUI/MainFrame.cpp:1191 src/slic3r/GUI/MainFrame.cpp:1193
msgid "Save Project &as"
msgstr "프로젝트 저장"

#: src/slic3r/GUI/MainFrame.cpp:1191 src/slic3r/GUI/MainFrame.cpp:1193
msgid "Save current project file as"
msgstr "현재 프로젝트 파일을 다른 이름으로 저장"

#: src/slic3r/GUI/MainFrame.cpp:1201
msgid "Import STL/OBJ/AM&F/3MF"
msgstr "가져오기 STL/OBJ/AM&F/3MF"

#: src/slic3r/GUI/MainFrame.cpp:1201
msgid "Load a model"
msgstr "모델 로드"

#: src/slic3r/GUI/MainFrame.cpp:1205
msgid "Import STL (Imperial Units)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1205
msgid "Load an model saved with imperial units"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1209
msgid "Import SL1 / SL1S Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1209
msgid "Load an SL1 / Sl1S archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1214
msgid "Import &Config"
msgstr "&구성 가져오기"

#: src/slic3r/GUI/MainFrame.cpp:1214
msgid "Load exported configuration file"
msgstr "내 보낸 구성 파일로드"

#: src/slic3r/GUI/MainFrame.cpp:1217
msgid "Import Config from &Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1217
msgid "Load configuration from project file"
msgstr "프로젝트 파일에서 구성 로드"

#: src/slic3r/GUI/MainFrame.cpp:1221
msgid "Import Config &Bundle"
msgstr "번들 &설정 가져오기"

#: src/slic3r/GUI/MainFrame.cpp:1221
msgid "Load presets from a bundle"
msgstr "미리 설정 번들값 가져오기"

#: src/slic3r/GUI/MainFrame.cpp:1224
msgid "&Import"
msgstr "&가져오기"

#: src/slic3r/GUI/MainFrame.cpp:1227 src/slic3r/GUI/MainFrame.cpp:1579
msgid "Export &G-code"
msgstr "G-code 내보내기"

#: src/slic3r/GUI/MainFrame.cpp:1227
msgid "Export current plate as G-code"
msgstr "현재 플레이터를 G 코드로 내보내기"

#: src/slic3r/GUI/MainFrame.cpp:1231 src/slic3r/GUI/MainFrame.cpp:1580
msgid "S&end G-code"
msgstr "S&엔드 G- 코드"

#: src/slic3r/GUI/MainFrame.cpp:1231
msgid "Send to print current plate as G-code"
msgstr "현재 플레이트를 G 코드로 인쇄하기 위해 보내기"

#: src/slic3r/GUI/MainFrame.cpp:1235
msgid "Export G-code to SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1235
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1239
msgid "Export Plate as &STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1239
msgid "Export current plate as STL"
msgstr "현재 플레이터를 STL로 내보내기"

#: src/slic3r/GUI/MainFrame.cpp:1242
msgid "Export Plate as STL &Including Supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1242
msgid "Export current plate as STL including supports"
msgstr "서포트를 포함 하여 현재 플레이터를 STL로 내보내기"

#: src/slic3r/GUI/MainFrame.cpp:1250 src/slic3r/GUI/MainFrame.cpp:1531
msgid "Export &Toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1250 src/slic3r/GUI/MainFrame.cpp:1531
msgid "Export toolpaths as OBJ"
msgstr "도구 경로를 OBJ로 내보내기"

#: src/slic3r/GUI/MainFrame.cpp:1254
msgid "Export &Config"
msgstr "&구성 내보내기"

#: src/slic3r/GUI/MainFrame.cpp:1254
msgid "Export current configuration to file"
msgstr "현재 구성을 파일로 내보내기"

#: src/slic3r/GUI/MainFrame.cpp:1257
msgid "Export Config &Bundle"
msgstr "번들 & 내보내기 설정"

#: src/slic3r/GUI/MainFrame.cpp:1257
msgid "Export all presets to file"
msgstr "모든 이전 설정을 파일로 내보내기"

#: src/slic3r/GUI/MainFrame.cpp:1260
msgid "Export Config Bundle With Physical Printers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1260
msgid "Export all presets including physical printers to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1263
msgid "&Export"
msgstr "&내보내기"

#: src/slic3r/GUI/MainFrame.cpp:1265
msgid "Ejec&t SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1265
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1273
msgid "Quick Slice"
msgstr "빠른 슬라이스"

#: src/slic3r/GUI/MainFrame.cpp:1273
msgid "Slice a file into a G-code"
msgstr "파일을 G 코드로 분할"

#: src/slic3r/GUI/MainFrame.cpp:1279
msgid "Quick Slice and Save As"
msgstr "빠른 슬라이스 및 다른 이름으로 저장"

#: src/slic3r/GUI/MainFrame.cpp:1279
msgid "Slice a file into a G-code, save as"
msgstr "파일을 G 코드로 분할하고 다른 이름으로 저장"

#: src/slic3r/GUI/MainFrame.cpp:1285
msgid "Repeat Last Quick Slice"
msgstr "마지막으로 빠른 슬라이스 반복"

#: src/slic3r/GUI/MainFrame.cpp:1285
msgid "Repeat last quick slice"
msgstr "마지막으로 빠른 슬라이스 반복"

#: src/slic3r/GUI/MainFrame.cpp:1293
msgid "(Re)Slice No&w"
msgstr "지금(다시)자르기"

#: src/slic3r/GUI/MainFrame.cpp:1293
msgid "Start new slicing process"
msgstr "새로운 슬라이싱 작업 시작"

#: src/slic3r/GUI/MainFrame.cpp:1297
msgid "&Repair STL file"
msgstr "STL 파일 복구"

#: src/slic3r/GUI/MainFrame.cpp:1297
msgid "Automatically repair an STL file"
msgstr "STL 파일을 자동으로 복구합니다"

#: src/slic3r/GUI/MainFrame.cpp:1301
msgid "&G-code Preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1304 src/slic3r/GUI/MainFrame.cpp:1538
msgid "&Quit"
msgstr "&종료"

#: src/slic3r/GUI/MainFrame.cpp:1304 src/slic3r/GUI/MainFrame.cpp:1538
#, c-format, boost-format
msgid "Quit %s"
msgstr "%s 종료"

#: src/slic3r/GUI/MainFrame.cpp:1319
msgid "&Select All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1320
msgid "Selects all objects"
msgstr "모든 객체(object)를 선택 합니다"

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "D&eselect All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1323
msgid "Deselects all objects"
msgstr "모든 객체(object) 선택 취소"

#: src/slic3r/GUI/MainFrame.cpp:1326
msgid "&Delete Selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1327
msgid "Deletes the current selection"
msgstr "현재 선택 영역을 삭제 합니다"

#: src/slic3r/GUI/MainFrame.cpp:1329
msgid "Delete &All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1330
msgid "Deletes all objects"
msgstr "모든 객체(object)를 삭제 합니다"

#: src/slic3r/GUI/MainFrame.cpp:1334
msgid "&Undo"
msgstr "&되돌리기"

#: src/slic3r/GUI/MainFrame.cpp:1337
msgid "&Redo"
msgstr "&앞으로"

#: src/slic3r/GUI/MainFrame.cpp:1342
msgid "&Copy"
msgstr "&복사 "

#: src/slic3r/GUI/MainFrame.cpp:1343
msgid "Copy selection to clipboard"
msgstr "선택영역을 클립보드로 복사합니다"

#: src/slic3r/GUI/MainFrame.cpp:1345
msgid "&Paste"
msgstr "&붙이기 "

#: src/slic3r/GUI/MainFrame.cpp:1346
msgid "Paste clipboard"
msgstr "클립보드 붙여넣기"

#: src/slic3r/GUI/MainFrame.cpp:1351 src/slic3r/GUI/MainFrame.cpp:1355
#: src/slic3r/GUI/MainFrame.cpp:1522 src/slic3r/GUI/MainFrame.cpp:1526
msgid "Re&load from Disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1361
msgid "Searc&h"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1362
msgid "Search in settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1370
msgid "&Plater Tab"
msgstr "&선택 및 플래이터 탭"

#: src/slic3r/GUI/MainFrame.cpp:1370
msgid "Show the plater"
msgstr "플레이터를 보기"

#: src/slic3r/GUI/MainFrame.cpp:1375
msgid "P&rint Settings Tab"
msgstr "프린트 설정 탭"

#: src/slic3r/GUI/MainFrame.cpp:1375
msgid "Show the print settings"
msgstr "인쇄 설정 표시"

#: src/slic3r/GUI/MainFrame.cpp:1378 src/slic3r/GUI/MainFrame.cpp:1582
msgid "&Filament Settings Tab"
msgstr "&필라멘트 설정 탭"

#: src/slic3r/GUI/MainFrame.cpp:1378
msgid "Show the filament settings"
msgstr "필라멘트 설정보기"

#: src/slic3r/GUI/MainFrame.cpp:1382
msgid "Print&er Settings Tab"
msgstr "설정 인쇄 탭"

#: src/slic3r/GUI/MainFrame.cpp:1382
msgid "Show the printer settings"
msgstr "간단한 설정보기"

#: src/slic3r/GUI/MainFrame.cpp:1388
msgid "3&D"
msgstr "3&D"

#: src/slic3r/GUI/MainFrame.cpp:1388
msgid "Show the 3D editing view"
msgstr "3D 편집용 보기 표시"

#: src/slic3r/GUI/MainFrame.cpp:1391
msgid "Pre&view"
msgstr "미리 보기"

#: src/slic3r/GUI/MainFrame.cpp:1391
msgid "Show the 3D slices preview"
msgstr "3D 슬라이스 미리 보기 표시"

#: src/slic3r/GUI/MainFrame.cpp:1397
msgid "Open the dialog to modify shape gallery"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1409
msgid "Print &Host Upload Queue"
msgstr "프린터 호스트 업로드 대기"

#: src/slic3r/GUI/MainFrame.cpp:1409
msgid "Display the Print Host Upload Queue window"
msgstr "호스트 업로드 대기열 인쇄 창 표시"

#: src/slic3r/GUI/MainFrame.cpp:1413
msgid "Open New Instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1417
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1554
msgid "Compare Presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1417
msgid "Compare presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1427
msgid "Show &Labels"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1427
msgid "Show object/instance labels in 3D scene"
msgstr "3D 장면에서 오브젝트/인스턴스 레이블 표시"

#: src/slic3r/GUI/MainFrame.cpp:1430
msgid "&Collapse Sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1430 src/slic3r/GUI/Plater.cpp:2296
msgid "Collapse sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1435
msgid "&Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1435
msgid "Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1450 src/slic3r/GUI/MainFrame.cpp:1553
msgid "&File"
msgstr "&파일"

#: src/slic3r/GUI/MainFrame.cpp:1451
msgid "&Edit"
msgstr "&수정"

#: src/slic3r/GUI/MainFrame.cpp:1452
msgid "&Window"
msgstr "&윈도우"

#: src/slic3r/GUI/MainFrame.cpp:1453 src/slic3r/GUI/MainFrame.cpp:1554
msgid "&View"
msgstr "&시점"

#: src/slic3r/GUI/MainFrame.cpp:1456 src/slic3r/GUI/MainFrame.cpp:1557
msgid "&Help"
msgstr "&도움말"

#: src/slic3r/GUI/MainFrame.cpp:1518
msgid "&Open G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1534
msgid "Open &PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1579
msgid "E&xport"
msgstr "보내기"

#: src/slic3r/GUI/MainFrame.cpp:1580
msgid "S&end to print"
msgstr "끝내고 프린트"

#: src/slic3r/GUI/MainFrame.cpp:1582
msgid "Mate&rial Settings Tab"
msgstr "재료(메터리리알) 설정 탭"

#: src/slic3r/GUI/MainFrame.cpp:1606
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "슬라이스 할 파일을 선택하십시오 (STL / OBJ / AMF / 3MF / PRUSA):"

#: src/slic3r/GUI/MainFrame.cpp:1618
msgid "No previously sliced file."
msgstr "이전에 분리 된 파일이 없습니다."

#: src/slic3r/GUI/MainFrame.cpp:1625
msgid "Previously sliced file ("
msgstr "이전에 분리 된 파일 ("

#: src/slic3r/GUI/MainFrame.cpp:1625
msgid ") not found."
msgstr ")을 찾을 수 없습니다."

#: src/slic3r/GUI/MainFrame.cpp:1626
msgid "File Not Found"
msgstr "파일을 찾을수 없다"

#: src/slic3r/GUI/MainFrame.cpp:1661
#, c-format, boost-format
msgid "Save %s file as:"
msgstr "%s 파일을 저장 합니다:"

#: src/slic3r/GUI/MainFrame.cpp:1661
msgid "SVG"
msgstr "Svg"

#: src/slic3r/GUI/MainFrame.cpp:1661
msgid "G-code"
msgstr "G 코드"

#: src/slic3r/GUI/MainFrame.cpp:1673
msgid "Save zip file as:"
msgstr "압축(zip)파일 다른이름 저장:"

#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3276
#: src/slic3r/GUI/Plater.cpp:5972 src/slic3r/GUI/Tab.cpp:1662
#: src/slic3r/GUI/Tab.cpp:4387
msgid "Slicing"
msgstr "슬라이싱"

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:1684
#, c-format, boost-format
msgid "Processing %s"
msgstr "처리 %s"

#: src/slic3r/GUI/MainFrame.cpp:1707
#, boost-format
msgid "%1% was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1710
msgid "Slicing Done!"
msgstr "슬라이스 완료!"

#: src/slic3r/GUI/MainFrame.cpp:1726
msgid "Select the STL file to repair:"
msgstr "복구 할 STL 파일을 선택하십시오:"

#: src/slic3r/GUI/MainFrame.cpp:1736
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr "OBJ 파일을 저장하십시오 (STL보다 오류를 덜 조정할 가능성이 적음):"

#: src/slic3r/GUI/MainFrame.cpp:1747
msgid "Your file was repaired."
msgstr "파일이 복구되었습니다."

#: src/slic3r/GUI/MainFrame.cpp:1747 src/libslic3r/PrintConfig.cpp:4370
msgid "Repair"
msgstr "수정"

#: src/slic3r/GUI/MainFrame.cpp:1761
msgid "Save configuration as:"
msgstr "구성을 저장 :"

#: src/slic3r/GUI/MainFrame.cpp:1778
msgid "Loading of a configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1780 src/slic3r/GUI/MainFrame.cpp:1845
msgid "Select configuration to load:"
msgstr "불러올 구성 선택 :"

#: src/slic3r/GUI/MainFrame.cpp:1809
msgid "Exporting configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1810
msgid ""
"Some presets are modified and the unsaved changes will not be exported into "
"configuration bundle."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1819
msgid "Save presets bundle as:"
msgstr "이전 번들 설정을 다음과 같이 저장 :"

#: src/slic3r/GUI/MainFrame.cpp:1842
msgid "Loading of a configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1872
#, c-format, boost-format
msgid "%d presets successfully imported."
msgstr "% d 사전 설정을 가져 왔습니다."

#: src/slic3r/GUI/Mouse3DController.cpp:453
msgid "3Dconnexion settings"
msgstr "3Dconnexion 설정"

#: src/slic3r/GUI/Mouse3DController.cpp:464
msgid "Device:"
msgstr "장치:"

#: src/slic3r/GUI/Mouse3DController.cpp:469
msgid "Speed:"
msgstr "스피드:"

#: src/slic3r/GUI/Mouse3DController.cpp:472
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Translation"
msgstr "번역"

#: src/slic3r/GUI/Mouse3DController.cpp:484
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Zoom"
msgstr "확대"

#: src/slic3r/GUI/Mouse3DController.cpp:490
msgid "Deadzone:"
msgstr "데드존:"

#: src/slic3r/GUI/Mouse3DController.cpp:505
msgid "Options:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:508
msgid "Swap Y/Z axes"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:180
#, c-format, boost-format
msgid "%s error"
msgstr "%s 오류"

#: src/slic3r/GUI/MsgDialog.cpp:181
#, c-format, boost-format
msgid "%s has encountered an error"
msgstr "%s에 오류가 발생 했습니다"

#: src/slic3r/GUI/MsgDialog.cpp:200
#, c-format, boost-format
msgid "%s warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:201
#, c-format, boost-format
msgid "%s has a warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:214 src/slic3r/GUI/MsgDialog.cpp:227
#, c-format, boost-format
msgid "%s info"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:255
#, c-format, boost-format
msgid "%s information"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:752
msgid "3D Mouse disconnected."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:753
msgid "Configuration update is available."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:753
msgid "See more."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:761
msgid ""
"You have just added a G-code for color change, but its value is empty.\n"
"To export the G-code correctly, check the \"Color Change G-code\" in "
"\"Printer Settings > Custom G-code\""
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:764
msgid ""
"No color change event was added to the print. The print does not look like a "
"sign."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:766
msgid "Desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:768
msgid "Desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:770
msgid "Undo desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:772
msgid "Undo desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:773
msgid "Exporting."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:664
msgid "Open Folder."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:701
msgid "Eject drive"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:885
msgid "ERROR"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:890
msgid "CANCELED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:895
msgid "COMPLETED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:937
msgid "Cancel upload"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:996
#, c-format, boost-format
msgid "%1$d Object was loaded with custom supports."
msgid_plural "%1$d Objects were loaded with custom supports."
msgstr[0] ""

#: src/slic3r/GUI/NotificationManager.cpp:997
#, c-format, boost-format
msgid "%1$d Object was loaded with custom seam."
msgid_plural "%1$d Objects were loaded with custom seam."
msgstr[0] ""

#: src/slic3r/GUI/NotificationManager.cpp:998
#, c-format, boost-format
msgid "%1$d Object was loaded with multimaterial painting."
msgid_plural "%1$d Objects were loaded with multimaterial painting."
msgstr[0] ""

#: src/slic3r/GUI/NotificationManager.cpp:999
#, c-format, boost-format
msgid "%1$d Object was loaded with variable layer height."
msgid_plural "%1$d Objects were loaded with variable layer height."
msgstr[0] ""

#: src/slic3r/GUI/NotificationManager.cpp:1000
#, c-format, boost-format
msgid "%1$d Object was loaded with partial sinking."
msgid_plural "%1$d Objects were loaded with partial sinking."
msgstr[0] ""

#: src/slic3r/GUI/NotificationManager.cpp:1113
msgid "Slicing finished."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1113
msgid "Export G-Code."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1113
msgid "Export."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1447
#: src/slic3r/GUI/NotificationManager.cpp:1454
#: src/slic3r/GUI/NotificationManager.cpp:1470
#: src/slic3r/GUI/NotificationManager.cpp:1476
#: src/slic3r/GUI/NotificationManager.cpp:1547
msgid "ERROR:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1459
#: src/slic3r/GUI/NotificationManager.cpp:1486
#: src/slic3r/GUI/NotificationManager.cpp:1494
#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3144
msgid "WARNING:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1598
msgid "Exporting finished."
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:50
msgid "Paint-on seam"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:52
msgid "Sinking"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:94
msgid "Instances"
msgstr "복제본"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:98
#: src/slic3r/GUI/ObjectDataViewModel.cpp:266
#, c-format, boost-format
msgid "Instance %d"
msgstr "복제본 %d"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4225
#: src/slic3r/GUI/Tab.cpp:4316
msgid "Layers"
msgstr "레이어"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:134
msgid "Range"
msgstr "범위"

#: src/slic3r/GUI/OpenGLManager.cpp:257
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""
"PrusaSlicer 제대로 실행하려면 OpenGL 2.0 가능한 그래픽 드라이버가 필요합니"
"다. \n"
"OpenGL 버전 %s, 렌더링 %s 동안, 공급 업체 %s가 감지되었습니다."

#: src/slic3r/GUI/OpenGLManager.cpp:260
msgid "You may need to update your graphics card driver."
msgstr "그래픽 카드 드라이버를 업데이트해야 할 수 있습니다."

#: src/slic3r/GUI/OpenGLManager.cpp:263
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:265
msgid "Unsupported OpenGL version"
msgstr "지원되지 않는 OpenGL 버전"

#: src/slic3r/GUI/OpenGLManager.cpp:273
#, c-format, boost-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:274
msgid "Error loading shaders"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:351
msgctxt "Layers"
msgid "Top"
msgstr "윗부분 "

#: src/slic3r/GUI/OptionsGroup.cpp:351
msgctxt "Layers"
msgid "Bottom"
msgstr "바닥 "

#: src/slic3r/GUI/OptionsGroup.cpp:991 src/slic3r/GUI/Preferences.cpp:362
msgid "Suppress to open hyperlink in browser"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:993
msgid "PrusaSlicer will remember your choice."
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:994
msgid "You will not be asked about it again on label hovering."
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:995
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to changes your choice."
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:997
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
msgid "PrusaSlicer: Don't ask me again"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52
msgid "Delete this preset from this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:83
msgid "This printer will be shown in the presets list as"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
msgid "Type here the name of your printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
msgid "Descriptive name for the printer"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
msgid "Add preset for this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2221
msgid "Print Host upload"
msgstr "호스트 업로드 인쇄"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:268
msgid "Connection to printers connected via the print host failed."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:310
msgid "Test"
msgstr "시험(test)"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:315
msgid "Could not get a valid Printer Host reference"
msgstr "유효한 프린터 호스트 참조를 가져올 수 없습니다"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:327
msgid "Success!"
msgstr "성공!"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337
msgid "Refresh Printers"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS CA 파일은 선택 사항입니다. 자체 서명 된 인증서로 HTTPS를 사용하는 경우"
"에만 필요합니다."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:374
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "인증서 파일 (* .crt, * .pem) | * .crt; * .pem | 모든 파일 | *. *"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375
msgid "Open CA certificate file"
msgstr "CA 인증서 파일 열기"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:404
#: src/libslic3r/PrintConfig.cpp:307
msgid "HTTPS CA File"
msgstr "HTTPS CA 파일"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:405
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:406
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
"사용자 지정 CA 파일을 사용 하려면 CA 파일을 인증서 저장소/키체인에 가져오십시"
"오."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:630
msgid "The supplied name is empty. It can't be saved."
msgstr "파일 이름이 비어 있습니다. 저장할 수 없습니다."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:634
msgid "You should change the name of your printer device."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:642
#, boost-format
msgid "Printer with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:643
msgid "Replace?"
msgstr "교체?"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:670
#, boost-format
msgid ""
"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
"\" will be used just once."
msgid_plural ""
"Following printer presets are duplicated:%1%The above presets for printer "
"\"%2%\" will be used just once."
msgstr[0] ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:720
msgid "It's not possible to delete the last related preset for the printer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:141
msgid "The provided name is not valid;"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:142 src/slic3r/GUI/SavePresetDialog.cpp:102
msgid "the following characters are not allowed:"
msgstr "다음 문자는 허용되지 않습니다:"

#: src/slic3r/GUI/Plater.cpp:207
msgid ""
"For a multipart object, this value isn't accurate.\n"
"It doesn't take account of intersections and negative volumes."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:211
msgid "Volume"
msgstr "크기"

#: src/slic3r/GUI/Plater.cpp:213
msgid "Facets"
msgstr "측면"

#: src/slic3r/GUI/Plater.cpp:276
msgid "Sliced Info"
msgstr "슬라이스된 정보"

#: src/slic3r/GUI/Plater.cpp:296 src/slic3r/GUI/Plater.cpp:1357
msgid "Used Filament (m)"
msgstr "사용자 필라멘트 (m)"

#: src/slic3r/GUI/Plater.cpp:297 src/slic3r/GUI/Plater.cpp:1369
msgid "Used Filament (mm³)"
msgstr "사용자 필라멘트 (mm³)"

#: src/slic3r/GUI/Plater.cpp:298 src/slic3r/GUI/Plater.cpp:1376
msgid "Used Filament (g)"
msgstr "사용자 필라멘트 (g)"

#: src/slic3r/GUI/Plater.cpp:299
msgid "Used Material (unit)"
msgstr "사용 재료 (단위)"

#: src/slic3r/GUI/Plater.cpp:300
msgid "Cost (money)"
msgstr "비용 (돈)"

#: src/slic3r/GUI/Plater.cpp:301 src/slic3r/GUI/Plater.cpp:1339
#: src/slic3r/GUI/Plater.cpp:1426
msgid "Estimated printing time"
msgstr "예상 인쇄 시간"

#: src/slic3r/GUI/Plater.cpp:302
msgid "Number of tool changes"
msgstr "공구(tool) 변경 수"

#: src/slic3r/GUI/Plater.cpp:431
msgid "Select what kind of support do you need"
msgstr "서포트의 종류를 선택하세요"

#: src/slic3r/GUI/Plater.cpp:433 src/libslic3r/PrintConfig.cpp:2534
#: src/libslic3r/PrintConfig.cpp:3493
msgid "Support on build plate only"
msgstr "출력물만 서포트를 지지"

#: src/slic3r/GUI/Plater.cpp:434 src/slic3r/GUI/Plater.cpp:563
msgid "For support enforcers only"
msgstr "서포트 지원영역 전용"

#: src/slic3r/GUI/Plater.cpp:435
msgid "Everywhere"
msgstr "모든곳"

#: src/slic3r/GUI/Plater.cpp:467 src/slic3r/GUI/Tab.cpp:1541
msgid "Brim"
msgstr "브림"

#: src/slic3r/GUI/Plater.cpp:469
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr "첫 번째 레이어의 각 객체(object) 주위에 인쇄 될 브림을 활성화합니다."

#: src/slic3r/GUI/Plater.cpp:477
msgid "Purging volumes"
msgstr "퍼징 조절"

#: src/slic3r/GUI/Plater.cpp:577
msgid "Select what kind of pad do you need"
msgstr "필요한 패드 종류를 선택하십시오."

#: src/slic3r/GUI/Plater.cpp:579
msgid "Below object"
msgstr "개체 아래"

#: src/slic3r/GUI/Plater.cpp:580
msgid "Around object"
msgstr "개체 주위"

#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6454
msgid "Send to printer"
msgstr "프린터로 보내기"

#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3276
#: src/slic3r/GUI/Plater.cpp:5975
msgid "Slice now"
msgstr "바로 슬라이스"

#: src/slic3r/GUI/Plater.cpp:1086
msgid "Hold Shift to Slice & Export G-code"
msgstr "Shift 키를 누른 채 G 코드 내보내기"

#: src/slic3r/GUI/Plater.cpp:1286
#, boost-format
msgid "%1% (%2$d shell)"
msgid_plural "%1% (%2$d shells)"
msgstr[0] ""

#: src/slic3r/GUI/Plater.cpp:1314
msgid "Used Material (ml)"
msgstr "사용 재료 (ml)"

#: src/slic3r/GUI/Plater.cpp:1317
msgid "object"
msgid_plural "objects"
msgstr[0] ""

#: src/slic3r/GUI/Plater.cpp:1317
msgid "supports and pad"
msgstr "지지대 및 패드"

#: src/slic3r/GUI/Plater.cpp:1357
msgid "Used Filament (in)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1359 src/slic3r/GUI/Plater.cpp:1412
msgid "objects"
msgstr "객체들(objects)"

#: src/slic3r/GUI/Plater.cpp:1359 src/slic3r/GUI/Plater.cpp:1412
msgid "wipe tower"
msgstr "와이프 타워(Wipe tower)"

#: src/slic3r/GUI/Plater.cpp:1369
msgid "Used Filament (in³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1395
#, boost-format
msgid "Filament at extruder %1%"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1401
msgid "(including spool)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1410 src/libslic3r/PrintConfig.cpp:1045
#: src/libslic3r/PrintConfig.cpp:3287 src/libslic3r/PrintConfig.cpp:3288
msgid "Cost"
msgstr "비용"

#: src/slic3r/GUI/Plater.cpp:1428
msgid "normal mode"
msgstr "일반 모드"

#: src/slic3r/GUI/Plater.cpp:1435
msgid "stealth mode"
msgstr "스텔스 모드"

#: src/slic3r/GUI/Plater.cpp:1672
msgid "Fill bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1678
msgid "Optimize Rotation"
msgstr "회전 최적화"

#: src/slic3r/GUI/Plater.cpp:1684
msgid "Import SLA archive"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1723
#, boost-format
msgid "Do you want to save the changes to \"%1%\"?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2174
#, c-format, boost-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2179
#, c-format, boost-format
msgid "Ejecting of device %s(%s) has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2198 src/slic3r/GUI/Plater.cpp:5024
msgid "New Project"
msgstr "새로운 프로젝트"

#: src/slic3r/GUI/Plater.cpp:2295
msgid "Expand sidebar"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2463
msgid ""
"The preset below was temporarily installed on the active instance of "
"PrusaSlicer"
msgid_plural ""
"The presets below were temporarily installed on the active instance of "
"PrusaSlicer"
msgstr[0] ""

#: src/slic3r/GUI/Plater.cpp:2493
#, boost-format
msgid "Failed loading file \"%1%\" due to an invalid configuration."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2513
#, c-format, boost-format
msgid ""
"Object size from file %s appears to be zero.\n"
"This object has been removed from the model"
msgid_plural ""
"Objects size from file %s appears to be zero.\n"
"These objects have been removed from the model"
msgstr[0] ""

#: src/slic3r/GUI/Plater.cpp:2517
msgid "The size of the object is zero"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2530
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""

#: src/slic3r/GUI/Plater.cpp:2534 src/slic3r/GUI/Plater.cpp:2556
msgid "The object is too small"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2535 src/slic3r/GUI/Plater.cpp:2557
msgid "Apply to all the remaining small objects being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2552
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""

#: src/slic3r/GUI/Plater.cpp:2570
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should \n"
"the file be loaded as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2573 src/slic3r/GUI/Plater.cpp:2628
msgid "Multi-part object detected"
msgstr "다중 부품(Part) 객체(object)가 감지"

#: src/slic3r/GUI/Plater.cpp:2581
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""
"이 파일은 기본 모드에서 로드할 수 없습니다. 고급 모드로 전환 하시겠습니까?"

#: src/slic3r/GUI/Plater.cpp:2582
msgid "Detected advanced data"
msgstr "감지된 고급 데이터"

#: src/slic3r/GUI/Plater.cpp:2602
#, c-format, boost-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""
"다중 부품(Part) 하나 또는 그 중 일부 때문에 %s에서 객체(object)를 추가 할 수 "
"없습니다"

#: src/slic3r/GUI/Plater.cpp:2625
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""
"다중 재료 프린터에 대해 여러 객체(object)가로드되었습니다.\n"
"여러 객체(object)로 간주하는 대신,\n"
"이 파일들은 여러 부분을 갖는 단일 객체(object)를 나타낼 수 있습니까?"

#: src/slic3r/GUI/Plater.cpp:2744
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr "객체(object)가 너무 커서 인쇄물에 맞게 자동으로 축소되었습니다."

#: src/slic3r/GUI/Plater.cpp:2745
msgid "Object too large?"
msgstr "객체(object)가 너무 큽니까?"

#: src/slic3r/GUI/Plater.cpp:2823
msgid "Export STL file:"
msgstr "STL 파일 내보내기:"

#: src/slic3r/GUI/Plater.cpp:2830
msgid "Export AMF file:"
msgstr "AMF 파일 내보내기:"

#: src/slic3r/GUI/Plater.cpp:2836
msgid "Save file as:"
msgstr "다른 이름으로 파일 저장:"

#: src/slic3r/GUI/Plater.cpp:2842
msgid "Export OBJ file:"
msgstr "OBJ 파일 내보내기:"

#: src/slic3r/GUI/Plater.cpp:2940
msgid "Delete Object"
msgstr "객체(object) 지우기"

#: src/slic3r/GUI/Plater.cpp:2952
msgid "Delete All Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2980
msgid "Reset Project"
msgstr "프로젝트 재설정"

#: src/slic3r/GUI/Plater.cpp:3063
msgid ""
"The selected object couldn't be split because it contains only one solid "
"part."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3070
msgid "All non-solid parts (modifiers) were deleted"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3072
msgid "Split to Objects"
msgstr "객체(object)로 분할"

#: src/slic3r/GUI/Plater.cpp:3126
msgid ""
"An object has custom support enforcers which will not be used because "
"supports are disabled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3128
msgid "Enable supports for enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3257 src/slic3r/GUI/Plater.cpp:4090
msgid "Invalid data"
msgstr "잘못 된 데이터"

#: src/slic3r/GUI/Plater.cpp:3327
msgid "Another export job is currently running."
msgstr "다른 내보내기 작업이 현재 실행 중입니다."

#: src/slic3r/GUI/Plater.cpp:3385
msgid "Replace from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3401
msgid "Unable to replace with more than one volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3401 src/slic3r/GUI/Plater.cpp:3480
msgid "Error during replace"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3472
msgid "Select the new file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3480
msgid "File for the replace wasn't selected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3571
msgid "Please select the file to reload"
msgstr "다시 로드할 파일을 선택하십시오."

#: src/slic3r/GUI/Plater.cpp:3602 src/slic3r/GUI/Plater.cpp:5152
msgid "The selected file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3603
msgid "differs from the original file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3603
msgid "Do you want to replace it"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3625
msgid "Reload from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3726
msgid "Unable to reload:"
msgstr "다시 로드할 수 없음:"

#: src/slic3r/GUI/Plater.cpp:3731
msgid "Error during reload"
msgstr "다시 로드하는 동안 오류"

#: src/slic3r/GUI/Plater.cpp:3749
msgid "Reload all from disk"
msgstr "디스크에서 모두 다시 로드"

#: src/slic3r/GUI/Plater.cpp:4044
msgid "There are active warnings concerning sliced models:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4055
msgid "generated warnings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4386
msgid "3D editor view"
msgstr "3D 편집화면 보기"

#: src/slic3r/GUI/Plater.cpp:4809
msgid "Undo / Redo is processing"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4811
#, boost-format
msgid ""
"Switching the printer technology from %1% to %2%.\n"
"Some %1% presets were modified, which will be lost after switching the "
"printer technology."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5008
msgid "Creating a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5011
msgid "Creating a new project while some presets are modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5012
msgid "You can keep presets modifications to the new project or discard them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5013
msgid ""
"You can keep presets modifications to the new project, discard them or save "
"changes as new presets.\n"
"Note, if changes will be saved then new project wouldn't keep them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5019
msgid "Creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5050
msgid "Load Project"
msgstr "프로젝트 불러오기"

#: src/slic3r/GUI/Plater.cpp:5076 src/slic3r/GUI/Plater.cpp:5336
msgid "Import Object"
msgstr "객체(object) 가져오기"

#: src/slic3r/GUI/Plater.cpp:5080
msgid "Import Objects"
msgstr "객체(object) 가져오기"

#: src/slic3r/GUI/Plater.cpp:5152
msgid "does not contain valid gcode."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5153
msgid "Error while loading .gcode file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5206
#, c-format, boost-format
msgid "%s - Drop project file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5213
msgid "Open as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5214
msgid "Import geometry only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5215
msgid "Import config only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5218
msgid "Select an action to apply to the file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5223
msgid "Action"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5239
msgid "Don't show again"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5280
msgid "You can open only one .gcode file at a time."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5281
msgid "Drag and drop G-code file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5358
msgid "Load File"
msgstr "파일 로드"

#: src/slic3r/GUI/Plater.cpp:5363
msgid "Load Files"
msgstr "파일 로드"

#: src/slic3r/GUI/Plater.cpp:5413
msgid "All objects will be removed, continue?"
msgstr "모든 객체(object)가 제거 됩니다, 계속합니까?"

#: src/slic3r/GUI/Plater.cpp:5424
msgid "Delete Selected Objects"
msgstr "선택한 객체(object) 삭제"

#: src/slic3r/GUI/Plater.cpp:5433
msgid "Increase Instances"
msgstr "복제본 늘리기"

#: src/slic3r/GUI/Plater.cpp:5467
msgid "Decrease Instances"
msgstr "복제본 감소"

#: src/slic3r/GUI/Plater.cpp:5518
msgid "Enter the number of copies:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5519
msgid "Copies of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5523
#, c-format, boost-format
msgid "Set numbers of copies to %d"
msgstr "복사본 수를 %d로 설정"

#: src/slic3r/GUI/Plater.cpp:5597
msgid "Cut by Plane"
msgstr "평면으로 절단"

#: src/slic3r/GUI/Plater.cpp:5657
msgid "Save G-code file as:"
msgstr "G-code 파일 다른 이름 저장:"

#: src/slic3r/GUI/Plater.cpp:5657
msgid "Save SL1 / SL1S file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5666
msgid "The provided file name is not valid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5667
msgid "The following characters are not allowed by a FAT file system:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5865
msgid ""
"The plater is empty.\n"
"Do you want to save the project?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5865
msgid "Save project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6453
msgid "Export"
msgstr "내보내기"

#: src/slic3r/GUI/Plater.cpp:6487
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"repairing the mesh."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6601
msgid "Paste From Clipboard"
msgstr "클립보드에서 붙여넣기"

#: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2256
#: src/slic3r/GUI/Tab.cpp:2479 src/slic3r/GUI/Tab.cpp:2585
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1275
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1663
msgid "General"
msgstr "일반"

#: src/slic3r/GUI/Preferences.cpp:119
msgid "Remember output directory"
msgstr "출력 디렉토리 기억하기"

#: src/slic3r/GUI/Preferences.cpp:121
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"이 옵션을 사용하면 Slic3r은 입력 파일이 들어있는 디렉터리 대신 마지막 출력 디"
"렉터리를 묻습니다."

#: src/slic3r/GUI/Preferences.cpp:127
msgid "Auto-center parts"
msgstr "부품(Part)을 자동으로 중재봉선에"

#: src/slic3r/GUI/Preferences.cpp:129
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""
"이 옵션을 사용하면 Slic3r가 객체(object)를 인쇄판 중앙에 자동으로 배치합니다."

#: src/slic3r/GUI/Preferences.cpp:135
msgid "Background processing"
msgstr "백그라운드 프로세싱"

#: src/slic3r/GUI/Preferences.cpp:137
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"이 사용 하는 경우 Slic3r는 최대한 빨리 시간을 절약 하기 위해 로드된 G-code를 "
"내보낸다."

#: src/slic3r/GUI/Preferences.cpp:146
msgid "Export sources full pathnames to 3mf and amf"
msgstr "소스 전체 경로 이름을 3mf 및 amf로 내보내기"

#: src/slic3r/GUI/Preferences.cpp:148
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""
"활성화된 경우 디스크에서 다시 로드 명령을 사용하여 호출될 때 파일을 자동으로 "
"찾고 로드할 수 있습니다."

#: src/slic3r/GUI/Preferences.cpp:157
msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:164
msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:175
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"활성화 된 경우 Slic3r은 백그라운드에서 내장된 시스템 설정의 업데이트를 다운로"
"드합니다. 이러한 업데이트는 별도의 임시 위치에 다운로드됩니다. 새로운 '사전 "
"설정' 버전을 사용할 수 있게되면 응용 프로그램 시작시 제공됩니다."

#: src/slic3r/GUI/Preferences.cpp:180
msgid "Suppress \" - default - \" presets"
msgstr "\"- 기본 -\"사전 설정 숨기기"

#: src/slic3r/GUI/Preferences.cpp:182
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"사용 가능한 다른 유효한 '사전 설정'이 있으면 인쇄 / 필라멘트 / 프린터 선택에"
"서 \"- 기본 -\"'사전 설정'을 억제하십시오."

#: src/slic3r/GUI/Preferences.cpp:188
msgid "Show incompatible print and filament presets"
msgstr "호환 되지 않는 인쇄 및 필라멘트 설정"

#: src/slic3r/GUI/Preferences.cpp:190
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"이 옵션을 선택하면 프린터와 호환되지 않는 것으로 표시된 경우에도 인쇄 및 필라"
"멘트 '사전 설정'이 '사전 설정' 편집기에 표시됩니다"

#: src/slic3r/GUI/Preferences.cpp:198
msgid "Show drop project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:200
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application, shows a dialog asking to select the action to take on the file "
"to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:206 src/slic3r/GUI/Preferences.cpp:210
msgid "Allow just a single PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:208
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:212
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:220
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
msgid ""
"Ask to save unsaved changes when closing the application or when loading a "
"new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:222
msgid ""
"Always ask for unsaved changes, when: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:229
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
msgid "Ask for unsaved changes when selecting new preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:231
msgid ""
"Always ask for unsaved changes when selecting new preset or resetting a "
"preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:236
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
msgid "Ask for unsaved changes when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:238
msgid "Always ask for unsaved changes when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:245
msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:247
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"gcode files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:255
msgid "Use Retina resolution for the 3D scene"
msgstr "3D 장면에 레티나 해상도 사용"

#: src/slic3r/GUI/Preferences.cpp:257
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""
"활성화 된 경우 3D 장면은 레티나 해상도로 렌더링 됩니다. 3D 성능 문제가 발생하"
"는 경우, 옵션을 사용하지 않도록 설정 하면 도움이 될 수 있습니다."

#: src/slic3r/GUI/Preferences.cpp:267 src/slic3r/GUI/Preferences.cpp:269
msgid "Show splash screen"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:275
msgid "Clear Undo / Redo stack on new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:277
msgid ""
"Clear Undo / Redo stack on new project or when an existing project is loaded."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:283
msgid "Enable support for legacy 3DConnexion devices"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:285
msgid ""
"If enabled, the legacy 3DConnexion devices settings dialog is available by "
"pressing CTRL+M"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:294
msgid "Camera"
msgstr "카메라"

#: src/slic3r/GUI/Preferences.cpp:299
msgid "Use perspective camera"
msgstr "원근 보기 사용"

#: src/slic3r/GUI/Preferences.cpp:301
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""
"이 옵션을 사용하면 원근 보기모드를 사용합니다. 활성화되지 않은 경우 일반 보기"
"를 사용합니다."

#: src/slic3r/GUI/Preferences.cpp:306
msgid "Use free camera"
msgstr "무료 카메라 사용"

#: src/slic3r/GUI/Preferences.cpp:308
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""
"활성화된 경우 무료 카메라를 사용하십시오. 활성화되지 않은 경우 구속된 카메라"
"를 사용합니다."

#: src/slic3r/GUI/Preferences.cpp:313
msgid "Reverse direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:315
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:323
msgid "GUI"
msgstr "GUI"

#: src/slic3r/GUI/Preferences.cpp:346
msgid "Sequential slider applied only to top layer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:348
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer. If disabled, changes made using the sequential slider, "
"in preview, apply to the whole gcode."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:355
msgid "Show sidebar collapse/expand button"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:357
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:364
msgid ""
"If enabled, the descriptions of configuration parameters in settings tabs "
"wouldn't work as hyperlinks. If disabled, the descriptions of configuration "
"parameters in settings tabs will work as hyperlinks."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:370
msgid "Use colors for axes values in Manipulation panel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:372
msgid ""
"If enabled, the axes names and axes values will be colorized according to "
"the axes colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:378
msgid "Order object volumes by types"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:380
msgid ""
"If enabled, volumes will be always ordered inside the object. Correct order "
"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
"Modifiers. But one of the model parts have to be on the first place."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:387
msgid "Set settings tabs as menu items (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:389
msgid ""
"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI "
"will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:398
msgid "Show \"Tip of the day\" notification after start"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:400
msgid "If enabled, useful hints are displayed at startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:406
msgid "Notify about new releases"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:408
msgid ""
"You will be notified about new release after startup acordingly: All = "
"Regular release and alpha / beta releases. Release only = regular release."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:414
msgid "Release only"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:423
msgid "Use custom size for toolbar icons"
msgstr "도구 모음 아이콘에 사용자 지정 크기 사용"

#: src/slic3r/GUI/Preferences.cpp:425
msgid "If enabled, you can change size of toolbar icons manually."
msgstr "활성화된 경우 도구 모음 아이콘의 크기를 수동으로 변경할 수 있습니다."

#: src/slic3r/GUI/Preferences.cpp:450
msgid "Render"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:455
msgid "Use environment map"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:457
msgid "If enabled, renders object using the environment map."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:470
msgid "Dark mode (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:475
msgid "Enable dark mode"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:477
msgid ""
"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:486
msgid "Use system menu for application"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:488
msgid ""
"If enabled, application will use the standard Windows system menu,\n"
"but on some combination of display scales it can looks ugly. If disabled, "
"old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:557
msgid "Changes for the critical options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:559
msgid ""
"Changing some options will trigger application restart.\n"
"You will lose the content of the plater."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:666
msgid "Icon size in a respect to the default size"
msgstr "기본 크기에 대한 아이콘 크기"

#: src/slic3r/GUI/Preferences.cpp:681
msgid "Select toolbar icon size in respect to the default one."
msgstr "기본 도구 모음에 대해 도구 모음 아이콘 크기를 선택합니다."

#: src/slic3r/GUI/Preferences.cpp:715 src/slic3r/GUI/Preferences.cpp:726
msgid "Old regular layout with the tab bar"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:716
msgid "New layout, access via settings button in the top menu"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:717 src/slic3r/GUI/Preferences.cpp:727
msgid "Settings in non-modal window"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:735
msgid "Layout Options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:778
msgid "Text colors"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:249
#: src/slic3r/GUI/PresetComboBoxes.cpp:287
#: src/slic3r/GUI/PresetComboBoxes.cpp:794
#: src/slic3r/GUI/PresetComboBoxes.cpp:849
#: src/slic3r/GUI/PresetComboBoxes.cpp:989
#: src/slic3r/GUI/PresetComboBoxes.cpp:1033
msgid "System presets"
msgstr "시스템 기본설정"

#: src/slic3r/GUI/PresetComboBoxes.cpp:291
#: src/slic3r/GUI/PresetComboBoxes.cpp:853
#: src/slic3r/GUI/PresetComboBoxes.cpp:1037
msgid "User presets"
msgstr "사용자 사전설정"

#: src/slic3r/GUI/PresetComboBoxes.cpp:302
msgid "Incompatible presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:337
#, boost-format
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:340
msgid "Delete Physical Printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:581
msgid "Click to edit preset"
msgstr "사전 설정을 편집 하려면 클릭 하십시오"

#: src/slic3r/GUI/PresetComboBoxes.cpp:697
#: src/slic3r/GUI/PresetComboBoxes.cpp:737
msgid "Add/Remove presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:702
#: src/slic3r/GUI/PresetComboBoxes.cpp:742 src/slic3r/GUI/Tab.cpp:3206
msgid "Add physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:716
msgid "Edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:722
msgid "Change extruder color"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:730 src/slic3r/GUI/Tab.cpp:3206
msgid "Edit physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:733
msgid "Delete physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:864
#: src/slic3r/GUI/PresetComboBoxes.cpp:1051
msgid "Physical printers"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:888
msgid "Add/Remove filaments"
msgstr "필라멘트 추가/제거"

#: src/slic3r/GUI/PresetComboBoxes.cpp:890
msgid "Add/Remove materials"
msgstr "재질 추가/제거"

#: src/slic3r/GUI/PresetComboBoxes.cpp:892
#: src/slic3r/GUI/PresetComboBoxes.cpp:1075
msgid "Add/Remove printers"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:32
#, boost-format
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""
"예상 레이어 시간이 ~%1%s 미만이면 팬이 %2%%% 에서 실행되고 인쇄 속도가 감소하"
"여 해당 레이어에 %3%s 이상이 소비되지 않습니다 (단, 속도는 아래로 감소하지 않"
"습니다 %4%mm/s)."

#: src/slic3r/GUI/PresetHints.cpp:40
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""
"예상 레이어 시간이 더 크지만 여전히 ~%1%s 미만이면, 팬은 %2%%% ~ %3%%% 사이에"
"서 비례적으로 감소하는 속도로 실행될 것이다."

#: src/slic3r/GUI/PresetHints.cpp:44
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at "
"%2%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:55
#, boost-format
msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "During the other layers, fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "Fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:59
#, boost-format
msgid "except for the first %1% layers."
msgstr "첫 번째 %1% 레이어를 제외하고"

#: src/slic3r/GUI/PresetHints.cpp:61
msgid "except for the first layer."
msgstr "첫 번째 레이어를 제외하고"

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "During the other layers, fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "Fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:170
msgid "external perimeters"
msgstr "외부 둘레"

#: src/slic3r/GUI/PresetHints.cpp:171
msgid "perimeters"
msgstr "둘레"

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr "채움(infill)"

#: src/slic3r/GUI/PresetHints.cpp:176
msgid "solid infill"
msgstr "외부(solid)부분 채움"

#: src/slic3r/GUI/PresetHints.cpp:178
msgid "top solid infill"
msgstr "가장 윗부분 채움"

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "support"
msgstr "서포트"

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "support interface"
msgstr "서포트 접점"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "First layer volumetric"
msgstr "첫번째 레이어 용적은"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Bridging volumetric"
msgstr "브리징(Bridging) 용적"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Volumetric"
msgstr "용적"

#: src/slic3r/GUI/PresetHints.cpp:188
msgid "flow rate is maximized"
msgstr "의 유속(flow)이 최대화된다. "

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "by the print profile maximum"
msgstr "인쇄 프로파일 최대 값"

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "when printing"
msgstr "인쇄 할 때"

#: src/slic3r/GUI/PresetHints.cpp:193
msgid "with a volumetric rate"
msgstr "의 용적 비율로 "

#: src/slic3r/GUI/PresetHints.cpp:197
#, c-format, boost-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr "%3.2f mm³/s 필라멘트 속도는 %3.2f mm/s이다."

#: src/slic3r/GUI/PresetHints.cpp:215
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""
"권장 객체(object)의 벽(wall) 두께: 잘못된 레이어 높이 때문에 사용할 수 없음."

#: src/slic3r/GUI/PresetHints.cpp:221
#, c-format, boost-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr "객체(object) 레이어 높이 %.2f 에 권장하는 두깨는 "

#: src/slic3r/GUI/PresetHints.cpp:236
#, c-format, boost-format
msgid "%d lines: %.2f mm"
msgstr "%d 라인:%.2f mm"

#: src/slic3r/GUI/PresetHints.cpp:240
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:269
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr "상단/하단 쉘 두께 힌트: 잘못된 레이어 높이로 인해 사용할 수 없습니다."

#: src/slic3r/GUI/PresetHints.cpp:282
#, boost-format
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr "상단 쉘은 층 높이 %2% mm에 대한 두께 %1% mm입니다."

#: src/slic3r/GUI/PresetHints.cpp:285
#, boost-format
msgid "Minimum top shell thickness is %1% mm."
msgstr "최소 상단 쉘 두께는 %1% mm입니다."

#: src/slic3r/GUI/PresetHints.cpp:288
msgid "Top is open."
msgstr "상단이 열려 있습니다."

#: src/slic3r/GUI/PresetHints.cpp:301
#, boost-format
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr "바닥 층 높이 %2% mm에 대한 두께 %1% mm입니다."

#: src/slic3r/GUI/PresetHints.cpp:304
#, boost-format
msgid "Minimum bottom shell thickness is %1% mm."
msgstr "최소 바닥 쉘 두께는 %1% mm입니다."

#: src/slic3r/GUI/PresetHints.cpp:307
msgid "Bottom is open."
msgstr "바닥이 열려 있습니다."

#: src/slic3r/GUI/PrintHostDialogs.cpp:40
msgid "Send G-Code to printer host"
msgstr "프린터 호스트로 G 코드 보내기"

#: src/slic3r/GUI/PrintHostDialogs.cpp:40
msgid "Upload to Printer Host with the following filename:"
msgstr "다음 파일 이름으로 프린터 호스트에 업로드:"

#: src/slic3r/GUI/PrintHostDialogs.cpp:50
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr "필요한 경우 디렉토리 분리 기호로 슬래시 (/)를 사용하십시오."

#: src/slic3r/GUI/PrintHostDialogs.cpp:59
msgid "Group"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:83
#, c-format, boost-format
msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:91
msgid "Upload and Print"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:102
msgid "Upload and Simulate"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:114
msgid "Upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:246
msgid "ID"
msgstr "아이디"

#: src/slic3r/GUI/PrintHostDialogs.cpp:247
msgid "Progress"
msgstr "진행률"

#: src/slic3r/GUI/PrintHostDialogs.cpp:248
msgid "Status"
msgstr "상태"

#: src/slic3r/GUI/PrintHostDialogs.cpp:249
msgid "Host"
msgstr "호스트"

#: src/slic3r/GUI/PrintHostDialogs.cpp:250
msgctxt "OfFile"
msgid "Size"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:251
msgid "Filename"
msgstr "파일이름"

#: src/slic3r/GUI/PrintHostDialogs.cpp:252
msgid "Error Message"
msgstr "에러 메시지"

#: src/slic3r/GUI/PrintHostDialogs.cpp:255
msgid "Cancel selected"
msgstr "선택 취소"

#: src/slic3r/GUI/PrintHostDialogs.cpp:257
msgid "Show error message"
msgstr "오류 메시지 표시"

#: src/slic3r/GUI/PrintHostDialogs.cpp:315
#: src/slic3r/GUI/PrintHostDialogs.cpp:370
msgid "Enqueued"
msgstr "입력됨"

#: src/slic3r/GUI/PrintHostDialogs.cpp:371
msgid "Uploading"
msgstr "업로드"

#: src/slic3r/GUI/PrintHostDialogs.cpp:373
msgid "Cancelling"
msgstr "취소 중"

#: src/slic3r/GUI/PrintHostDialogs.cpp:374
msgid "Cancelled"
msgstr "취소됨"

#: src/slic3r/GUI/PrintHostDialogs.cpp:375
msgid "Completed"
msgstr "완료됨"

#: src/slic3r/GUI/PrintHostDialogs.cpp:423
msgid "Error uploading to print host:"
msgstr "인쇄 호스트에 업로드 하는 중 오류 발생:"

#: src/slic3r/GUI/RammingChart.cpp:29
msgid "NO RAMMING AT ALL"
msgstr "전혀 충돌 없음"

#: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:114
#: src/libslic3r/PrintConfig.cpp:929 src/libslic3r/PrintConfig.cpp:973
#: src/libslic3r/PrintConfig.cpp:988 src/libslic3r/PrintConfig.cpp:3154
#: src/libslic3r/PrintConfig.cpp:3163 src/libslic3r/PrintConfig.cpp:3304
#: src/libslic3r/PrintConfig.cpp:3312 src/libslic3r/PrintConfig.cpp:3320
#: src/libslic3r/PrintConfig.cpp:3327 src/libslic3r/PrintConfig.cpp:3335
#: src/libslic3r/PrintConfig.cpp:3343
msgid "s"
msgstr "s"

#: src/slic3r/GUI/RammingChart.cpp:95
msgid "Volumetric speed"
msgstr "용적(Volumetric) 스피트"

#: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:886
#: src/libslic3r/PrintConfig.cpp:1776
msgid "mm³/s"
msgstr "밀리미터 ³/s"

#: src/slic3r/GUI/SavePresetDialog.cpp:57
#, c-format, boost-format
msgid "Save %s as:"
msgstr "Save %s as:"

#: src/slic3r/GUI/SavePresetDialog.cpp:101
#: src/slic3r/GUI/SavePresetDialog.cpp:109
msgid "The supplied name is not valid;"
msgstr "제공된 이름이 유효하지 않습니다;"

#: src/slic3r/GUI/SavePresetDialog.cpp:110
msgid "the following suffix is not allowed:"
msgstr "다음 접미사는 허용되지 않습니다:"

#: src/slic3r/GUI/SavePresetDialog.cpp:116
msgid "The supplied name is not available."
msgstr "제공된 이름을 사용할 수 없습니다."

#: src/slic3r/GUI/SavePresetDialog.cpp:122
msgid "Cannot overwrite a system profile."
msgstr "시스템 프로파일을 겹쳐 쓸 수 없습니다."

#: src/slic3r/GUI/SavePresetDialog.cpp:127
msgid "Cannot overwrite an external profile."
msgstr "외부 프로필을 덮어 쓸 수 없습니다."

#: src/slic3r/GUI/SavePresetDialog.cpp:134
#, boost-format
msgid "Preset with name \"%1%\" already exists."
msgstr "이름 \"%1%\"가 있는 사전 설정이 이미 있습니다."

#: src/slic3r/GUI/SavePresetDialog.cpp:136
#, boost-format
msgid ""
"Preset with name \"%1%\" already exists and is incompatible with selected "
"printer."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:137
msgid "Note: This preset will be replaced after saving"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:142
msgid "The name cannot be empty."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:147
msgid "The name cannot start with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:152
msgid "The name cannot end with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:157
msgid "The name cannot be the same as a preset alias name."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:191
#: src/slic3r/GUI/SavePresetDialog.cpp:197
msgid "Save preset"
msgstr "사전 설정 저장"

#: src/slic3r/GUI/SavePresetDialog.cpp:221
msgctxt "PresetName"
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:283
#, boost-format
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:322
#, boost-format
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:325
#, boost-format
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:326
#, boost-format
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:327
#, boost-format
msgid "Just switch to \"%1%\" preset"
msgstr ""

#: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345
#: src/slic3r/GUI/Tab.cpp:2613
msgid "Stealth"
msgstr "스텔스"

#: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345
#: src/slic3r/GUI/Tab.cpp:2607
msgid "Normal"
msgstr "보통"

#: src/slic3r/GUI/Selection.cpp:170
msgid "Selection-Add"
msgstr "선택 추가"

#: src/slic3r/GUI/Selection.cpp:211
msgid "Selection-Remove"
msgstr "선택-제거"

#: src/slic3r/GUI/Selection.cpp:243
msgid "Selection-Add Object"
msgstr "선택-추가 객체"

#: src/slic3r/GUI/Selection.cpp:262
msgid "Selection-Remove Object"
msgstr "선택-제거 개체"

#: src/slic3r/GUI/Selection.cpp:280
msgid "Selection-Add Instance"
msgstr "선택-인스턴스 추가"

#: src/slic3r/GUI/Selection.cpp:299
msgid "Selection-Remove Instance"
msgstr "선택-제거 인스턴스"

#: src/slic3r/GUI/Selection.cpp:396
msgid "Selection-Add All"
msgstr "선택-모두 추가"

#: src/slic3r/GUI/Selection.cpp:421
msgid "Selection-Remove All"
msgstr "선택-모두 제거"

#: src/slic3r/GUI/Selection.cpp:961 src/slic3r/GUI/Selection.cpp:1062
msgid "Scale To Fit"
msgstr "크기에 맞게 조정"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:114
msgid "Data to send"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:550
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:618
msgid "Send system info"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:581
#, boost-format
msgid ""
"This is the first time you are running %1%. We would like to ask you to send "
"some of your system information to us. This will only happen once and we "
"will not ask you to do this again (only after you upgrade to the next "
"version)."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:585
msgid ""
"If we know your hardware, operating system, etc., it will greatly help us in "
"development and prioritization, because we will be able to focus our effort "
"more efficiently and spend time on features that are needed the most."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:588
msgid "Is it safe?"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:590
#, boost-format
msgid ""
"We do not send any personal information nor anything that would allow us to "
"identify you later. To detect duplicate entries, a unique number derived "
"from your system is sent, but the source information cannot be "
"reconstructed. Apart from that, only general data about your OS, hardware "
"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
"inspect the code actually performing the communication, see %1%."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:614
msgid "Show verbatim data that will be sent"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:616
msgid "Ask me next time"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:617
msgid "Do not send anything"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:703
msgid "System info sent successfully. Thank you."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:706
msgid "Sending system info failed!"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:713
msgid "Sending system info was cancelled."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:720
msgid "Sending system info..."
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:84
msgid "System Information"
msgstr "시스템 정보"

#: src/slic3r/GUI/SysInfoDialog.cpp:150
msgid "Blacklisted libraries loaded into PrusaSlicer process:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:162
msgid "Eigen vectorization supported:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:169
msgid "Copy to Clipboard"
msgstr "클립보드에 복사"

#: src/slic3r/GUI/Tab.cpp:114 src/libslic3r/PrintConfig.cpp:542
msgid "Compatible printers"
msgstr "호환 가능한 프린터들"

#: src/slic3r/GUI/Tab.cpp:115
msgid "Select the printers this profile is compatible with."
msgstr "이 프로파일과 호환 가능한 프린터를 선택하세요."

#: src/slic3r/GUI/Tab.cpp:120 src/libslic3r/PrintConfig.cpp:557
msgid "Compatible print profiles"
msgstr "호환되는 인쇄 프로 파일"

#: src/slic3r/GUI/Tab.cpp:121
msgid "Select the print profiles this profile is compatible with."
msgstr "이 프로필이 호환되는 인쇄 프로필을 선택 합니다."

#: src/slic3r/GUI/Tab.cpp:216
msgid "Compare this preset with some another"
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:218
#, c-format, boost-format
msgid "Save current %s"
msgstr "현재 %s 저장"

#: src/slic3r/GUI/Tab.cpp:219
msgid "Delete this preset"
msgstr "이전 설정 삭제"

#: src/slic3r/GUI/Tab.cpp:223
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"버튼 위로 커서를 가져 가서 자세한 정보를 찾습니다.\n"
"또는이 버튼을 클릭하십시오."

#: src/slic3r/GUI/Tab.cpp:227
#, boost-format
msgid "Search in settings [%1%]"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1298
msgid "Detach from system preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1311
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1312
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1315
msgid "Modifications to the current profile will be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1321
msgid "Detach preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1347
msgid "This is a default preset."
msgstr "기본 설정입니다."

#: src/slic3r/GUI/Tab.cpp:1349
msgid "This is a system preset."
msgstr "시스템 설정입니다."

#: src/slic3r/GUI/Tab.cpp:1351
msgid "Current preset is inherited from the default preset."
msgstr "현재 사전 설정은 기본 사전 설정에서 상속됩니다."

#: src/slic3r/GUI/Tab.cpp:1355
msgid "Current preset is inherited from"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1359
msgid "It can't be deleted or modified."
msgstr "삭제하거나 수정할 수 없습니다."

#: src/slic3r/GUI/Tab.cpp:1360
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr "모든 수정 사항은 이 항목에서 받은 기본 설정으로 저장해야합니다."

#: src/slic3r/GUI/Tab.cpp:1361
msgid "To do that please specify a new name for the preset."
msgstr "그렇게하려면 기본 설정의 새 이름을 지정하십시오."

#: src/slic3r/GUI/Tab.cpp:1365
msgid "Additional information:"
msgstr "추가 정보:"

#: src/slic3r/GUI/Tab.cpp:1371
msgid "printer model"
msgstr "프린터 모델"

#: src/slic3r/GUI/Tab.cpp:1379
msgid "default print profile"
msgstr "기본 인쇄 프로파일"

#: src/slic3r/GUI/Tab.cpp:1382
msgid "default filament profile"
msgstr "기본 필라멘트 프로파일"

#: src/slic3r/GUI/Tab.cpp:1396
msgid "default SLA material profile"
msgstr "기본 SLA 재질 프로 파일"

#: src/slic3r/GUI/Tab.cpp:1400
msgid "default SLA print profile"
msgstr "기본 SLA 인쇄 프로필"

#: src/slic3r/GUI/Tab.cpp:1408
msgid "full profile name"
msgstr "전체 프로필 이름"

#: src/slic3r/GUI/Tab.cpp:1409
msgid "symbolic profile name"
msgstr "기호 프로파일 이름"

#: src/slic3r/GUI/Tab.cpp:1447 src/slic3r/GUI/Tab.cpp:4314
msgid "Layers and perimeters"
msgstr "레이어 및 둘레"

#: src/slic3r/GUI/Tab.cpp:1453
msgid "Vertical shells"
msgstr "수직 쉘"

#: src/slic3r/GUI/Tab.cpp:1465
msgid "Horizontal shells"
msgstr "수평 쉘"

#: src/slic3r/GUI/Tab.cpp:1466 src/libslic3r/PrintConfig.cpp:2361
msgid "Solid layers"
msgstr "솔리드 레이어"

#: src/slic3r/GUI/Tab.cpp:1471
msgid "Minimum shell thickness"
msgstr "최소 쉘 두께"

#: src/slic3r/GUI/Tab.cpp:1482
msgid "Quality (slower slicing)"
msgstr "품질(슬라이싱이 느려짐)"

#: src/slic3r/GUI/Tab.cpp:1496
msgid "Fuzzy skin (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1519
msgid "Reducing printing time"
msgstr "출력 시간 단축"

#: src/slic3r/GUI/Tab.cpp:1534 src/libslic3r/ExtrusionEntity.cpp:358
msgid "Skirt"
msgstr "스커트"

#: src/slic3r/GUI/Tab.cpp:1556
msgid "Raft"
msgstr "라프트"

#: src/slic3r/GUI/Tab.cpp:1561
msgid "Options for support material and raft"
msgstr "서포트와 라프트 재료를 선택"

#: src/slic3r/GUI/Tab.cpp:1581
msgid "Speed for print moves"
msgstr "출력중 이동 속도"

#: src/slic3r/GUI/Tab.cpp:1594
msgid "Speed for non-print moves"
msgstr "미출력시 이동속도"

#: src/slic3r/GUI/Tab.cpp:1598
msgid "Modifiers"
msgstr "수정"

#: src/slic3r/GUI/Tab.cpp:1602
msgid "Acceleration control (advanced)"
msgstr "가속 제어(고급)"

#: src/slic3r/GUI/Tab.cpp:1610
msgid "Autospeed (advanced)"
msgstr "오토스피트(고급)"

#: src/slic3r/GUI/Tab.cpp:1618
msgid "Multiple Extruders"
msgstr "다중 익스트루더"

#: src/slic3r/GUI/Tab.cpp:1626
msgid "Ooze prevention"
msgstr "오즈 방지(Ooze prevention)"

#: src/slic3r/GUI/Tab.cpp:1646
msgid "Extrusion width"
msgstr "악출 폭(Extrusion width)"

#: src/slic3r/GUI/Tab.cpp:1656
msgid "Overlap"
msgstr "겹침(Overlap)"

#: src/slic3r/GUI/Tab.cpp:1659
msgid "Flow"
msgstr "유량(Flow)"

#: src/slic3r/GUI/Tab.cpp:1670
msgid "Other"
msgstr "그 외"

#: src/slic3r/GUI/Tab.cpp:1673 src/slic3r/GUI/Tab.cpp:4391
msgid "Output options"
msgstr "출력 옵션"

#: src/slic3r/GUI/Tab.cpp:1674
msgid "Sequential printing"
msgstr "연속 인쇄"

#: src/slic3r/GUI/Tab.cpp:1676
msgid "Extruder clearance"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1681 src/slic3r/GUI/Tab.cpp:4392
msgid "Output file"
msgstr "출력 파일"

#: src/slic3r/GUI/Tab.cpp:1688 src/libslic3r/PrintConfig.cpp:1986
msgid "Post-processing scripts"
msgstr "사후 처리 스크립트"

#: src/slic3r/GUI/Tab.cpp:1700 src/slic3r/GUI/Tab.cpp:1701
#: src/slic3r/GUI/Tab.cpp:2076 src/slic3r/GUI/Tab.cpp:2077
#: src/slic3r/GUI/Tab.cpp:2460 src/slic3r/GUI/Tab.cpp:2461
#: src/slic3r/GUI/Tab.cpp:2532 src/slic3r/GUI/Tab.cpp:2533
#: src/slic3r/GUI/Tab.cpp:4242 src/slic3r/GUI/Tab.cpp:4243
msgid "Notes"
msgstr "메모"

#: src/slic3r/GUI/Tab.cpp:1707 src/slic3r/GUI/Tab.cpp:2084
#: src/slic3r/GUI/Tab.cpp:2467 src/slic3r/GUI/Tab.cpp:2539
#: src/slic3r/GUI/Tab.cpp:4250 src/slic3r/GUI/Tab.cpp:4397
msgid "Dependencies"
msgstr "속한 그룹"

#: src/slic3r/GUI/Tab.cpp:1708 src/slic3r/GUI/Tab.cpp:2085
#: src/slic3r/GUI/Tab.cpp:2468 src/slic3r/GUI/Tab.cpp:2540
#: src/slic3r/GUI/Tab.cpp:4251 src/slic3r/GUI/Tab.cpp:4398
msgid "Profile dependencies"
msgstr "프로파일 속한곳"

#: src/slic3r/GUI/Tab.cpp:1746
msgid "Post processing scripts shall modify G-code file in place."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1816
#, c-format, boost-format
msgid ""
"The following line %s contains reserved keywords.\n"
"Please remove it, as it may cause problems in G-code visualization and "
"printing time estimation."
msgid_plural ""
"The following lines %s contain reserved keywords.\n"
"Please remove them, as they may cause problems in G-code visualization and "
"printing time estimation."
msgstr[0] ""

#: src/slic3r/GUI/Tab.cpp:1821
msgid "Found reserved keywords in"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1835
msgid "Filament Overrides"
msgstr "필라멘트 재정의"

#: src/slic3r/GUI/Tab.cpp:1958
msgid "Nozzle"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1963
msgid "Bed"
msgstr "배드(Bed)"

#: src/slic3r/GUI/Tab.cpp:1968
msgid "Cooling"
msgstr "냉각(Cooling)"

#: src/slic3r/GUI/Tab.cpp:1970 src/libslic3r/PrintConfig.cpp:1888
#: src/libslic3r/PrintConfig.cpp:2938
msgid "Enable"
msgstr "사용"

#: src/slic3r/GUI/Tab.cpp:1981
msgid "Fan settings"
msgstr "팬 설정"

#: src/slic3r/GUI/Tab.cpp:1992
msgid "Cooling thresholds"
msgstr "냉각 임계 값"

#: src/slic3r/GUI/Tab.cpp:1998
msgid "Filament properties"
msgstr "필라멘트 특성"

#: src/slic3r/GUI/Tab.cpp:2005
msgid "Print speed override"
msgstr "인쇄 속도 중단"

#: src/slic3r/GUI/Tab.cpp:2015
msgid "Wipe tower parameters"
msgstr "타워 매개변수 지우기"

#: src/slic3r/GUI/Tab.cpp:2018
msgid "Toolchange parameters with single extruder MM printers"
msgstr "MMU 프린터의 툴체인지 매개 변수"

#: src/slic3r/GUI/Tab.cpp:2031
msgid "Ramming settings"
msgstr "래밍 설정"

#: src/slic3r/GUI/Tab.cpp:2055 src/slic3r/GUI/Tab.cpp:2372
#: src/slic3r/GUI/Tab.cpp:3923 src/libslic3r/GCode.cpp:718
#: src/libslic3r/PrintConfig.cpp:2444
msgid "Custom G-code"
msgstr "수동 G코드"

#: src/slic3r/GUI/Tab.cpp:2056 src/slic3r/GUI/Tab.cpp:2373
#: src/libslic3r/GCode.cpp:692 src/libslic3r/PrintConfig.cpp:2394
#: src/libslic3r/PrintConfig.cpp:2409
msgid "Start G-code"
msgstr "스타트 G코드"

#: src/slic3r/GUI/Tab.cpp:2066 src/slic3r/GUI/Tab.cpp:2383
#: src/libslic3r/GCode.cpp:693 src/libslic3r/PrintConfig.cpp:662
#: src/libslic3r/PrintConfig.cpp:672
msgid "End G-code"
msgstr "엔드 G코드"

#: src/slic3r/GUI/Tab.cpp:2119
msgid "Volumetric flow hints not available"
msgstr "체적 흐름 힌트를 사용할 수 없음"

#: src/slic3r/GUI/Tab.cpp:2223
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2257 src/slic3r/GUI/Tab.cpp:2480
msgid "Size and coordinates"
msgstr "크기와 좌표"

#: src/slic3r/GUI/Tab.cpp:2266 src/slic3r/GUI/UnsavedChangesDialog.cpp:1275
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1663
msgid "Capabilities"
msgstr "기능"

#: src/slic3r/GUI/Tab.cpp:2271
msgid "Number of extruders of the printer."
msgstr "프린터 익스트루더 갯수."

#: src/slic3r/GUI/Tab.cpp:2300
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""
"단일 압출기 다중 재질이 선택되고, \n"
"모든 압출기는 동일한 직경을 가져야 합니다.\n"
"모든 압출기의 지름을 첫 번째 압출기 노즐 값으로 변경하시겠습니까?"

#: src/slic3r/GUI/Tab.cpp:2304 src/slic3r/GUI/Tab.cpp:2741
#: src/libslic3r/PrintConfig.cpp:1852
msgid "Nozzle diameter"
msgstr "노즐 직경"

#: src/slic3r/GUI/Tab.cpp:2393 src/libslic3r/GCode.cpp:694
#: src/libslic3r/PrintConfig.cpp:402
msgid "Before layer change G-code"
msgstr "레이어 변경 전 G 코드"

#: src/slic3r/GUI/Tab.cpp:2403 src/libslic3r/GCode.cpp:695
#: src/libslic3r/PrintConfig.cpp:1578
msgid "After layer change G-code"
msgstr "레이어 변경 후 G 코드"

#: src/slic3r/GUI/Tab.cpp:2413 src/libslic3r/GCode.cpp:696
#: src/libslic3r/PrintConfig.cpp:2821
msgid "Tool change G-code"
msgstr "툴 채인지 G 코드"

#: src/slic3r/GUI/Tab.cpp:2423 src/libslic3r/GCode.cpp:697
msgid "Between objects G-code (for sequential printing)"
msgstr "객체(object) 간 G 코드 (순차 인쇄용)"

#: src/slic3r/GUI/Tab.cpp:2433 src/libslic3r/GCode.cpp:698
msgid "Color Change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2442 src/libslic3r/GCode.cpp:699
#: src/libslic3r/PrintConfig.cpp:2435
msgid "Pause Print G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2451 src/libslic3r/GCode.cpp:700
msgid "Template Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2487
msgid "Display"
msgstr "표시"

#: src/slic3r/GUI/Tab.cpp:2502
msgid "Tilt"
msgstr "기울이기"

#: src/slic3r/GUI/Tab.cpp:2503
msgid "Tilt time"
msgstr "기울이기 시간"

#: src/slic3r/GUI/Tab.cpp:2509 src/slic3r/GUI/Tab.cpp:4232
msgid "Corrections"
msgstr "수정"

#: src/slic3r/GUI/Tab.cpp:2522 src/slic3r/GUI/Tab.cpp:4228
msgid "Exposure"
msgstr "노출"

#: src/slic3r/GUI/Tab.cpp:2583 src/slic3r/GUI/Tab.cpp:2668
#: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1642
#: src/libslic3r/PrintConfig.cpp:1659 src/libslic3r/PrintConfig.cpp:1676
#: src/libslic3r/PrintConfig.cpp:1692 src/libslic3r/PrintConfig.cpp:1702
#: src/libslic3r/PrintConfig.cpp:1712 src/libslic3r/PrintConfig.cpp:1725
#: src/libslic3r/PrintConfig.cpp:1735
msgid "Machine limits"
msgstr "머신 한계설정"

#: src/slic3r/GUI/Tab.cpp:2606
msgid "Values in this column are for Normal mode"
msgstr "이 열의 값은 일반 모드입니다"

#: src/slic3r/GUI/Tab.cpp:2612
msgid "Values in this column are for Stealth mode"
msgstr "이 열의 값은 무음 모드 용입니다"

#: src/slic3r/GUI/Tab.cpp:2621
msgid "Maximum feedrates"
msgstr "최대 이송속도"

#: src/slic3r/GUI/Tab.cpp:2626
msgid "Maximum accelerations"
msgstr "최고 가속도"

#: src/slic3r/GUI/Tab.cpp:2635
msgid "Jerk limits"
msgstr "저크(Jerk)값 한계"

#: src/slic3r/GUI/Tab.cpp:2640
msgid "Minimum feedrates"
msgstr "최대 이송속도"

#: src/slic3r/GUI/Tab.cpp:2693 src/slic3r/GUI/Tab.cpp:2702
msgid "Single extruder MM setup"
msgstr "싱글 익스트루더 MM 설정"

#: src/slic3r/GUI/Tab.cpp:2703
msgid "Single extruder multimaterial parameters"
msgstr "싱글 익스트루더 멀티메터리알 파라미터"

#: src/slic3r/GUI/Tab.cpp:2738
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""
"이것은 단일 압출기 다중 재질 프린터이며 모든 압출기의 지름이 새 값으로 설정됩"
"니다. 계속하시겠습니까?"

#: src/slic3r/GUI/Tab.cpp:2763
msgid "Layer height limits"
msgstr "레이어 높이 한계치"

#: src/slic3r/GUI/Tab.cpp:2768
msgid "Position (for multi-extruder printers)"
msgstr "위치 (다중 익스트루더 프린터 포함)"

#: src/slic3r/GUI/Tab.cpp:2774
msgid "Only lift Z"
msgstr "Z축 올림"

#: src/slic3r/GUI/Tab.cpp:2787
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr "도구 비활성화시 리트렉션 (다중 익스트루더 고급 설정)"

#: src/slic3r/GUI/Tab.cpp:2794
msgid "Reset to Filament Color"
msgstr "필라멘트 색상으로 재설정"

#: src/slic3r/GUI/Tab.cpp:2974
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"펌웨어 리트렉션 모드를 사용할 때는 Wipe 옵션을 사용할 수 없습니다.\n"
"\n"
"펌웨어 리트렉션 하려면 비활성화해야합니까?"

#: src/slic3r/GUI/Tab.cpp:2976
msgid "Firmware Retraction"
msgstr "펌웨어 레트렉션"

#: src/slic3r/GUI/Tab.cpp:3277
msgid "New printer preset selected"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3583
msgid "Detached"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3650
msgid "remove"
msgstr "제거(remove)"

#: src/slic3r/GUI/Tab.cpp:3650
msgid "delete"
msgstr "지우기"

#: src/slic3r/GUI/Tab.cpp:3659
msgid "It's a last preset for this physical printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3664
#, boost-format
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3676
msgid ""
"The physical printer below is based on the preset, you are going to delete."
msgid_plural ""
"The physical printers below are based on the preset, you are going to delete."
msgstr[0] ""

#: src/slic3r/GUI/Tab.cpp:3681
msgid "Note, that the selected preset will be deleted from this printer too."
msgid_plural ""
"Note, that the selected preset will be deleted from these printers too."
msgstr[0] ""

#: src/slic3r/GUI/Tab.cpp:3686
msgid ""
"The physical printer below is based only on the preset, you are going to "
"delete."
msgid_plural ""
"The physical printers below are based only on the preset, you are going to "
"delete."
msgstr[0] ""

#: src/slic3r/GUI/Tab.cpp:3691
msgid ""
"Note, that this printer will be deleted after deleting the selected preset."
msgid_plural ""
"Note, that these printers will be deleted after deleting the selected preset."
msgstr[0] ""

#: src/slic3r/GUI/Tab.cpp:3696
#, boost-format
msgid "Are you sure you want to %1% the selected preset?"
msgstr "선택한 사전 설정의 %1%를 선택 하시겠습니까?"

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3701
#, boost-format
msgid "%1% Preset"
msgstr "%1% 기본설정"

#: src/slic3r/GUI/Tab.cpp:3784 src/slic3r/GUI/Tab.cpp:3857
msgid "Set"
msgstr "설정"

#: src/slic3r/GUI/Tab.cpp:3949
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3952
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3956
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3978
msgid "LOCKED LOCK"
msgstr "잠긴 잠금"

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3980
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""
"설정이 현재 옵션 그룹의 시스템(또는 기본값) 값과 동일하다는 것을 나타냅니다."

#: src/slic3r/GUI/Tab.cpp:3982
msgid "UNLOCKED LOCK"
msgstr "잠금 해제 잠금"

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3984
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""
"은 일부 설정이 변경되었으며 현재 옵션 그룹의 시스템(또는 기본값) 값과 같지 않"
"음을 나타냅니다.\n"
"잠금 해제 잠금 아이콘을 클릭하여 현재 옵션 그룹에 대한 모든 설정을 시스템(또"
"는 기본값) 값으로 재설정합니다."

#: src/slic3r/GUI/Tab.cpp:3989
msgid "WHITE BULLET"
msgstr "흰색 글머리 기호"

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3991
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""
"왼쪽 단추의 경우: 비시스템(또는 기본이 아닌) 사전 설정을 나타냅니다.\n"
"오른쪽 버튼: 설정이 수정되지 않았음을 나타냅니다."

#: src/slic3r/GUI/Tab.cpp:3994
msgid "BACK ARROW"
msgstr "돌아가기 화살표"

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3996
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""
"잠금 풀림;일부 설정이 변경되었으며 현재 옵션 그룹의 시스템 값과 같지 않음을 "
"나타냅니다.\n"
"현재 옵션 그룹의 모든 설정을 시스템 값으로 재설정하려면 자물쇠 잠금 아이콘을 "
"클릭하십시오."

#: src/slic3r/GUI/Tab.cpp:4006
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""
"LOCKED LOCK 아이콘은 설정이 현재 옵션 그룹의 시스템(또는 기본값) 값과 동일하"
"다는 것을 나타냅니다."

#: src/slic3r/GUI/Tab.cpp:4008
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""
"UNLOCKED LOCK 아이콘은 일부 설정이 변경되었으며 현재 옵션 그룹의 시스템(또는 "
"기본값) 값과 같지 않음을 나타냅니다.\n"
"현재 옵션 그룹에 대한 모든 설정을 시스템(또는 기본값) 값으로 재설정하려면 클"
"릭합니다."

#: src/slic3r/GUI/Tab.cpp:4011
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr "WHITE BULLET 아이콘은 시스템 사전 설정이 아닌 것을 나타냅니다."

#: src/slic3r/GUI/Tab.cpp:4014
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""
"WHITE BULLET 기호 아이콘은 설정이 현재 옵션 그룹에 대해 마지막으로 저장 된 사"
"전 설정과 동일 하다는 것을 나타냅니다."

#: src/slic3r/GUI/Tab.cpp:4016
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"BACK ARROW 이콘 설정을 변경 하 고 현재 옵션 그룹에 대 한 마지막 저장 된 프리"
"셋을 동일 하지 않습니다 나타냅니다.\n"
"마지막 현재 옵션 그룹에 대 한 모든 설정 다시 설정을 클릭 하 여 사전 설정을 저"
"장."

#: src/slic3r/GUI/Tab.cpp:4022
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""
"LOCKED LOCK 아이콘은 값이 시스템(또는 기본값) 값과 동일하다는 것을 나타냅니"
"다."

#: src/slic3r/GUI/Tab.cpp:4023
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""
"UNLOCKED LOCK 아이콘은 값이 변경되었으며 시스템(또는 기본값) 값과 같지 않음"
"을 나타냅니다.\n"
"현재 값을 시스템(또는 기본값) 값으로 재설정하려면 클릭합니다."

#: src/slic3r/GUI/Tab.cpp:4029
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""
"WHITE BULLET 기호 아이콘은 마지막으로 저장 한 사전 설정과 동일한 값을 나타냅"
"니다."

#: src/slic3r/GUI/Tab.cpp:4030
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"BACK ARROW 아이콘은 값이 변경되었으며 마지막으로 저장된 사전 설정과 같지 않음"
"을 나타냅니다.\n"
"현재 값을 마지막으로 저장된 사전 설정으로 재설정하려면 클릭합니다."

#: src/slic3r/GUI/Tab.cpp:4184 src/slic3r/GUI/Tab.cpp:4186
msgid "Material"
msgstr "재료"

#: src/slic3r/GUI/Tab.cpp:4271 src/slic3r/GUI/Tab.cpp:4272
msgid "Material printing profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4324
msgid "Support head"
msgstr "서포트 헤드"

#: src/slic3r/GUI/Tab.cpp:4329
msgid "Support pillar"
msgstr "서포트 기둥"

#: src/slic3r/GUI/Tab.cpp:4352
msgid "Connection of the support sticks and junctions"
msgstr "서포트 기둥 및 접합부 연결"

#: src/slic3r/GUI/Tab.cpp:4357
msgid "Automatic generation"
msgstr "자동 생성"

#: src/slic3r/GUI/Tab.cpp:4432
#, boost-format
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4434 src/libslic3r/PrintConfig.cpp:3572
msgid "Object elevation"
msgstr "객체(object) 고도"

#: src/slic3r/GUI/Tab.cpp:4434 src/libslic3r/PrintConfig.cpp:3674
msgid "Pad around object"
msgstr "개체 주위패드"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
msgid "Undef"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
msgid "Unsaved Changes"
msgstr "미 저장된 변경점"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
msgid "Switching Presets: Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
msgid "Old Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
msgid "New Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
msgid "Keep"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
msgid "Transfer"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
msgid "Don't save"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
msgid "Discard"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
msgid "Save"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
msgid ""
"You will not be asked about the unsaved changes the next time you create new "
"project"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
msgid ""
"You will not be asked about the unsaved changes the next time you switch a "
"preset"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
msgid ""
"You will not be asked about the unsaved changes the next time you: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
msgid "PrusaSlicer will remember your action."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
msgid "All settings changes will not be saved"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
msgid "All settings changes will be discarded."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
msgid "Save the selected options."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
msgid "Keep the selected settings."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
msgid "Transfer the selected settings to the newly selected preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
#, boost-format
msgid "Save the selected options to preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
#, boost-format
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1214
msgid "The following preset was modified"
msgid_plural "The following presets were modified"
msgstr[0] ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1220
#, boost-format
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1225
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1271
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
msgid "Extruders count"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1493
msgid "Show all presets (including incompatible)"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1508
msgid "Left Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1509
msgid "Right Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1616
msgid "One of the presets doesn't found"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1627
msgid "Compared presets has different printer technology"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1641
msgid "Presets are the same"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
msgid ""
"Presets are different.\n"
"Click this button to select the same preset for the right and left preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
msgid "Undef category"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
msgid "Undef group"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:37
msgid "Update available"
msgstr "사용가능한 업데이트"

#: src/slic3r/GUI/UpdateDialogs.cpp:37
#, c-format, boost-format
msgid "New version of %s is available"
msgstr "%s의 새 버전을 사용할 수 있습니다"

#: src/slic3r/GUI/UpdateDialogs.cpp:42
msgid "Current version:"
msgstr "현재 버전:"

#: src/slic3r/GUI/UpdateDialogs.cpp:44
msgid "New version:"
msgstr "새로운 버전:"

#: src/slic3r/GUI/UpdateDialogs.cpp:52
msgid "Changelog && Download"
msgstr "변경 로그 및 다운로드"

#: src/slic3r/GUI/UpdateDialogs.cpp:59 src/slic3r/GUI/UpdateDialogs.cpp:133
#: src/slic3r/GUI/UpdateDialogs.cpp:190
msgid "Open changelog page"
msgstr "변경 로그 페이지 열기"

#: src/slic3r/GUI/UpdateDialogs.cpp:65
msgid "Open download page"
msgstr "다운로드 페이지 열기"

#: src/slic3r/GUI/UpdateDialogs.cpp:72
msgid "Don't notify about new releases any more"
msgstr "새로운 수정사항에 대해 더 이상 알림 안 함"

#: src/slic3r/GUI/UpdateDialogs.cpp:94
msgid "Opening Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:94 src/slic3r/GUI/UpdateDialogs.cpp:259
msgid "Configuration update"
msgstr "구성 업데이트"

#: src/slic3r/GUI/UpdateDialogs.cpp:95
msgid ""
"PrusaSlicer is not using the newest configuration available.\n"
"Configuration Wizard may not offer the latest printers, filaments and SLA "
"materials to be installed."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:97
msgid "Configuration update is available"
msgstr "구성 업데이트를 사용할 수 있음"

#: src/slic3r/GUI/UpdateDialogs.cpp:100
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"그것을 설치 하시겠습니까?\n"
"\n"
"전체 구성 스냅 샷이 먼저 만들어집니다. 그런 다음 새 버전에 문제가있을 경우 언"
"제든지 복원 할 수 있습니다.\n"
"\n"
"업데이트 된 구성 번들 :"

#: src/slic3r/GUI/UpdateDialogs.cpp:121 src/slic3r/GUI/UpdateDialogs.cpp:180
msgid "Comment:"
msgstr "코멘트:"

#: src/slic3r/GUI/UpdateDialogs.cpp:141
msgid "Install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:143
msgid "Don't install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:156 src/slic3r/GUI/UpdateDialogs.cpp:210
#, c-format, boost-format
msgid "%s incompatibility"
msgstr "%s 비 호환성"

#: src/slic3r/GUI/UpdateDialogs.cpp:156
msgid "You must install a configuration update."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:159
#, c-format, boost-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"%s는 이제 업데이트를 시작합니다. 그렇지 않으면 시작할 수 없습니다.\n"
"\n"
"전체 구성 스냅숏이 먼저 만들어집니다. 그런 다음 새 버전에 문제가 있으면 언제"
"든지 복원 할 수 있습니다.\n"
"\n"
"업데이트된 구성 번들:"

#: src/slic3r/GUI/UpdateDialogs.cpp:198 src/slic3r/GUI/UpdateDialogs.cpp:245
#, c-format, boost-format
msgid "Exit %s"
msgstr "%s 종료"

#: src/slic3r/GUI/UpdateDialogs.cpp:211
#, c-format, boost-format
msgid "%s configuration is incompatible"
msgstr "%s 과 호환되지 않습니다"

#: src/slic3r/GUI/UpdateDialogs.cpp:214
#, c-format, boost-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""
"%s의 이 버전은 현재 설치 된 구성 번들과 호환 되지 않습니다.\n"
"이것은 새로운 것을 사용한 후 이전 %s를 실행 한 결과로 발생 했을 것입니다.\n"
"\n"
" %s를 종료하고 최신 버전으로 다시 시도 하거나 초기 구성을 다시 실행할 수 있습"
"니다. 이렇게 하면 %s와 호환 되는 파일을 설치하기 전에 기존 구성의 백업 스냅샷"
"이 생성 됩니다."

#: src/slic3r/GUI/UpdateDialogs.cpp:223
#, c-format, boost-format
msgid "This %s version: %s"
msgstr "이 %s 버전: %s"

#: src/slic3r/GUI/UpdateDialogs.cpp:228
msgid "Incompatible bundles:"
msgstr "호환되지 않는 번들 :"

#: src/slic3r/GUI/UpdateDialogs.cpp:244
msgid "Re-configure"
msgstr "재구성"

#: src/slic3r/GUI/UpdateDialogs.cpp:263
#, c-format, boost-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""
"%s이 (가) 이제 업데이트 된 구성 구조를 사용 합니다.\n"
"\n"
"'시스템 프리셋 '이 도입 되었습니다, 다양한 프린터에 대한 기본 설정을 내장. 이"
"러한 시스템 프리셋은 수정할 수 없으며, 사용자는 이제 시스템 프리셋 중 하나에"
"서 설정을 상속하는 자신만의 프리셋을 생성할 수 있습니다.\n"
"상속하는 사전 설정은 해당 기본 설정에서 특정 값을 상속 하거나 사용자 지정 된 "
"값으로 재정의할 수 있습니다.\n"
"\n"
"다음의 %s를 계속 진행하여 새 프리셋을 설정하고 자동 프리셋 업데이트를 사용할"
"지 여부를 선택하십시오."

#: src/slic3r/GUI/UpdateDialogs.cpp:280
msgid "For more information please visit our wiki page:"
msgstr "자세한 정보는 위키 페이지를 참조하십시오 :"

#: src/slic3r/GUI/UpdateDialogs.cpp:297
msgid "Configuration updates"
msgstr "구성 업데이트"

#: src/slic3r/GUI/UpdateDialogs.cpp:297
msgid "No updates available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:302
#, c-format, boost-format
msgid "%s has no configuration updates available."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:21
msgid "Ramming customization"
msgstr "사용자 정의 다지기(Ramming)"

#: src/slic3r/GUI/WipeTowerDialog.cpp:54
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"래밍은 단일 압출기 MMU 프린터에서 공구 교환 직전의 신속한 압출을 나타냅니다. "
"그 목적은 언로드 된 필라멘트의 끝 부분을 적절히 형성하여 새로운 필라멘트의 삽"
"입을 방지하고 나중에 다시 삽입 할 수 있도록하기위한 것입니다. 이 단계는 중요"
"하며 다른 재료는 좋은 모양을 얻기 위해 다른 압출 속도를 요구할 수 있습니다. "
"이러한 이유로, 래밍 중 압출 속도는 조정 가능합니다.\n"
"\n"
"전문가 수준의 설정이므로 잘못된 조정으로 인해 용지 걸림, 압출기 휠이 필라멘"
"트 등에 연삭 될 수 있습니다."

#: src/slic3r/GUI/WipeTowerDialog.cpp:114
msgid "Total ramming time"
msgstr "총 래밍 시간"

#: src/slic3r/GUI/WipeTowerDialog.cpp:116
msgid "Total rammed volume"
msgstr "총 레미드 양"

#: src/slic3r/GUI/WipeTowerDialog.cpp:120
msgid "Ramming line width"
msgstr "래밍 선 너비"

#: src/slic3r/GUI/WipeTowerDialog.cpp:122
msgid "Ramming line spacing"
msgstr "래밍 선 간격"

#: src/slic3r/GUI/WipeTowerDialog.cpp:173
msgid "Wipe tower - Purging volume adjustment"
msgstr "와이프 타워 - 버려진 필라멘트 조절"

#: src/slic3r/GUI/WipeTowerDialog.cpp:299
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr "여기서 주어진 도구 쌍에 필요한 정화 용량 (mm³)을 조정할 수 있습니다."

#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "Extruder changed to"
msgstr "익스트루더 번경"

#: src/slic3r/GUI/WipeTowerDialog.cpp:308
msgid "unloaded"
msgstr "언로드(unloaded)"

#: src/slic3r/GUI/WipeTowerDialog.cpp:309
msgid "loaded"
msgstr "로드(loaded)"

#: src/slic3r/GUI/WipeTowerDialog.cpp:352
msgid "Tool #"
msgstr "도구(Tool) #"

#: src/slic3r/GUI/WipeTowerDialog.cpp:361
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""
"총 정화 량은 어느 공구가로드 / 언로드되는지에 따라 아래의 두 값을 합산하여 계"
"산됩니다."

#: src/slic3r/GUI/WipeTowerDialog.cpp:362
msgid "Volume to purge (mm³) when the filament is being"
msgstr "제거할 필라멘트 양 (mm³)"

#: src/slic3r/GUI/WipeTowerDialog.cpp:376
msgid "From"
msgstr "From"

#: src/slic3r/GUI/WipeTowerDialog.cpp:442
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""
"단순 설정으로 전환하면 고급 모드에서 수행된 변경 내용이 삭제됨!\n"
"\n"
"계속하시겠습니까?"

#: src/slic3r/GUI/WipeTowerDialog.cpp:454
msgid "Show simplified settings"
msgstr "간단한 설정보기"

#: src/slic3r/GUI/WipeTowerDialog.cpp:454
msgid "Show advanced settings"
msgstr "고급 설정보기"

#: src/slic3r/GUI/wxExtensions.cpp:643
#, c-format, boost-format
msgid "Switch to the %s mode"
msgstr "%s 모드로 전환"

#: src/slic3r/GUI/wxExtensions.cpp:644
#, c-format, boost-format
msgid "Current mode is %s"
msgstr "현재 모드는 %s입니다"

#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:141
#: src/slic3r/Utils/Repetier.cpp:69
#, c-format, boost-format
msgid "Mismatched type of print host: %s"
msgstr "일치 하지않는 인쇄 호스트 유형: %s"

#: src/slic3r/Utils/AstroBox.cpp:84
msgid "Connection to AstroBox works correctly."
msgstr "아스트로박스에 대한 연결이 올바르게 작동합니다."

#: src/slic3r/Utils/AstroBox.cpp:90
msgid "Could not connect to AstroBox"
msgstr "아스트로박스에 연결할 수 없습니다."

#: src/slic3r/Utils/AstroBox.cpp:92
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr "참고: 아스트로박스 버전은 최소 1.1.0이 필요합니다."

#: src/slic3r/Utils/Duet.cpp:47
msgid "Connection to Duet works correctly."
msgstr "듀엣보드에 대한 연결이 올바르게 작동 합니다."

#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr "듀엣보드에 연결할 수 없습니다"

#: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:157
#: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143
#: src/slic3r/Utils/FlashAir.cpp:159
msgid "Unknown error occured"
msgstr "알 수 없는 오류가 발생 했습니다"

#: src/slic3r/Utils/Duet.cpp:151
msgid "Wrong password"
msgstr "잘못된 암호"

#: src/slic3r/Utils/Duet.cpp:154
msgid "Could not get resources to create a new connection"
msgstr "새 연결을 만들 리소스를 가져올수 없습니다"

#: src/slic3r/Utils/FixModelByWin10.cpp:221
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr "소스 모델 내보내기"

#: src/slic3r/Utils/FixModelByWin10.cpp:237
msgid "Failed loading the input model."
msgstr "입력 모델을 로드하지 못했습니다."

#: src/slic3r/Utils/FixModelByWin10.cpp:244
msgid "Repairing model by the Netfabb service"
msgstr "Netfabb 서비스에의 한 모델 복구"

#: src/slic3r/Utils/FixModelByWin10.cpp:250
msgid "Mesh repair failed."
msgstr "메쉬 복구에 실패 했습니다."

#: src/slic3r/Utils/FixModelByWin10.cpp:253
#: src/slic3r/Utils/FixModelByWin10.cpp:386
msgid "Loading repaired model"
msgstr "복구 된 모델 로드"

#: src/slic3r/Utils/FixModelByWin10.cpp:265
#: src/slic3r/Utils/FixModelByWin10.cpp:272
#: src/slic3r/Utils/FixModelByWin10.cpp:304
msgid "Saving mesh into the 3MF container failed."
msgstr "3MF 컨테이너에 메쉬를 저장하지 못했습니다."

#: src/slic3r/Utils/FixModelByWin10.cpp:376
msgid "Export of a temporary 3mf file failed"
msgstr "임시 3mf 파일을 내보내지 못했습니다"

#: src/slic3r/Utils/FixModelByWin10.cpp:392
msgid "Import of the repaired 3mf file failed"
msgstr "복구된 3mf 파일을 가져오지 못했습니다"

#: src/slic3r/Utils/FixModelByWin10.cpp:394
msgid "Repaired 3MF file does not contain any object"
msgstr "복구된 3MF 파일에 객체(object)가 포함 되어있지 않습니다"

#: src/slic3r/Utils/FixModelByWin10.cpp:396
msgid "Repaired 3MF file contains more than one object"
msgstr "복구된 3MF 파일에 둘 이상의 객체(object)가 포함되어 있습니다"

#: src/slic3r/Utils/FixModelByWin10.cpp:398
msgid "Repaired 3MF file does not contain any volume"
msgstr "복구 된 3MF 파일에 객체(object)가 포함 되어있지 않습니다"

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Repaired 3MF file contains more than one volume"
msgstr "복구된 3MF 파일에 둘 이상의 객체(object)가 포함되어 있습니다"

#: src/slic3r/Utils/FixModelByWin10.cpp:410
msgid "Model repair finished"
msgstr "모델 수리 완료"

#: src/slic3r/Utils/FixModelByWin10.cpp:416
msgid "Model repair canceled"
msgstr "모델 복구가 취소 되었습니다"

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr "FlashAir 카드에서 업로드가 활성화되지 않았습니다."

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr "FlashAir에 대한 연결이 올바르게 작동하고 업로드가 활성화되어 있습니다."

#: src/slic3r/Utils/FlashAir.cpp:74
msgid "Could not connect to FlashAir"
msgstr "플래시 에어에 연결할 수 없습니다."

#: src/slic3r/Utils/FlashAir.cpp:76
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""
"참고 : 펌웨어 2.00.02 이상 및 활성화 된 업로드 기능이있는 FlashAir가 필요합니"
"다."

#: src/slic3r/Utils/OctoPrint.cpp:164
msgid "Connection to OctoPrint works correctly."
msgstr "OctoPrint에 연결하면 올바르게 작동합니다."

#: src/slic3r/Utils/OctoPrint.cpp:170
msgid "Could not connect to OctoPrint"
msgstr "OctoPrint에 연결할 수 없습니다"

#: src/slic3r/Utils/OctoPrint.cpp:172
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "참고 : OctoPrint 버전 1.1.0 이상이 필요합니다."

#: src/slic3r/Utils/OctoPrint.cpp:292
msgid "Connection to Prusa SL1 / SL1S works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:298
msgid "Could not connect to Prusa SLA"
msgstr "Prusa SLA에 연결할 수 없습니다"

#: src/slic3r/Utils/OctoPrint.cpp:336
msgid "Connection to PrusaLink works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:342
msgid "Could not connect to PrusaLink"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:61
#, boost-format
msgid "Copying of file %1% to %2% failed: %3%"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:645
#: src/slic3r/Utils/PresetUpdater.cpp:662
msgid "Continue and install configuration updates?"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:777
msgid ""
"Configuration Updates causes a lost of preset modification.\n"
"So, check unsaved changes and save them if necessary."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:779
msgid "Updating"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:808
#, c-format, boost-format
msgid "requires min. %s and max. %s"
msgstr "최소. %s 와 최대. %s"

#: src/slic3r/Utils/PresetUpdater.cpp:812
#, c-format, boost-format
msgid "requires min. %s"
msgstr "최소 %s가 필요 합니다"

#: src/slic3r/Utils/PresetUpdater.cpp:815
#, c-format, boost-format
msgid "requires max. %s"
msgstr "최대 필요 합니다. %s"

#: src/slic3r/Utils/Http.cpp:73
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr ""

#: src/slic3r/Utils/Http.cpp:78
#, boost-format
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr ""

#: src/slic3r/Utils/Http.cpp:82
#, boost-format
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""

#: src/slic3r/Utils/Http.cpp:91
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""

#: src/slic3r/Utils/Process.cpp:157
msgid "Open G-code file:"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:84
msgid "Connection to Repetier works correctly."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:90
msgid "Could not connect to Repetier"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:92
msgid "Note: Repetier version at least 0.90.0 is required."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:246
#, boost-format
msgid ""
"HTTP status: %1%\n"
"Message body: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:253
#, boost-format
msgid ""
"Parsing of host response failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:266
#, boost-format
msgid ""
"Enumeration of host printers failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/libslic3r/GCode.cpp:524
msgid "There is an object with no extrusions in the first layer."
msgstr ""

#: src/libslic3r/GCode.cpp:555
#, boost-format
msgid "Empty layer between %1% and %2%."
msgstr ""

#: src/libslic3r/GCode.cpp:558
msgid "(Some lines not shown)"
msgstr ""

#: src/libslic3r/GCode.cpp:560
#, boost-format
msgid "Object name: %1%"
msgstr ""

#: src/libslic3r/GCode.cpp:561
msgid ""
"Make sure the object is printable. This is usually caused by negligibly "
"small extrusions or by a faulty model. Try to repair the model or change its "
"orientation on the bed."
msgstr ""

#: src/libslic3r/GCode.cpp:703
msgid "Filament Start G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:710
msgid "Filament End G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:749
msgid "In the custom G-code were found reserved keywords:"
msgstr ""

#: src/libslic3r/GCode.cpp:751
msgid ""
"This may cause problems in g-code visualization and printing time estimation."
msgstr ""

#: src/libslic3r/GCode.cpp:1405
msgid ""
"Your print is very close to the priming regions. Make sure there is no "
"collision."
msgstr ""

#: src/libslic3r/ExtrusionEntity.cpp:332 src/libslic3r/ExtrusionEntity.cpp:368
msgid "Mixed"
msgstr "혼합"

#: src/libslic3r/Flow.cpp:61
#, boost-format
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""
"%1%에 대한 압출 폭을 계산할 수 없습니다: 변수 \"%2%\"에 액세스할 수 없습니다."

#: src/libslic3r/Format/3mf.cpp:1734
#, boost-format
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr "선택한 3mf 파일은 %1%의 최신 버전으로 저장되었으며 호환되지 않습니다."

#: src/libslic3r/Format/3mf.cpp:1745
msgid ""
"The selected 3MF contains FDM supports painted object using a newer version "
"of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1749
msgid ""
"The selected 3MF contains seam painted object using a newer version of "
"PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1753
msgid ""
"The selected 3MF contains multi-material painted object using a newer "
"version of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/AMF.cpp:993
#, boost-format
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr "선택한 amf 파일은 %1%의 최신 버전으로 저장되었으며 호환되지 않습니다."

#: src/libslic3r/GCode/PostProcessor.cpp:289
#, boost-format
msgid ""
"Post-processing script %1% failed.\n"
"\n"
"The post-processing script is expected to change the G-code file %2% in "
"place, but the G-code file was deleted and likely saved under a new name.\n"
"Please adjust the post-processing script to change the G-code in place and "
"consult the manual on how to optionally rename the post-processed G-code "
"file.\n"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:91
msgid "undefined error"
msgstr "정의 되지 않은 오류"

#: src/libslic3r/miniz_extension.cpp:93
msgid "too many files"
msgstr "파일이 너무 많음"

#: src/libslic3r/miniz_extension.cpp:95
msgid "file too large"
msgstr "파일이 너무 큼"

#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported method"
msgstr "지원 되지 않는 방법"

#: src/libslic3r/miniz_extension.cpp:99
msgid "unsupported encryption"
msgstr "지원 되지 않는 암호화"

#: src/libslic3r/miniz_extension.cpp:101
msgid "unsupported feature"
msgstr "지원 되지 않는 기능"

#: src/libslic3r/miniz_extension.cpp:103
msgid "failed finding central directory"
msgstr "중앙 디렉터리를 찾지 못했습니다."

#: src/libslic3r/miniz_extension.cpp:105
msgid "not a ZIP archive"
msgstr "zIP 아카이브 아님"

#: src/libslic3r/miniz_extension.cpp:107
msgid "invalid header or archive is corrupted"
msgstr "잘못 된 헤더 또는 아카이브가 손상 되었습니다"

#: src/libslic3r/miniz_extension.cpp:109
msgid "unsupported multidisk archive"
msgstr "지원 되지 않는 다중 디스크 아카이브"

#: src/libslic3r/miniz_extension.cpp:111
msgid "decompression failed or archive is corrupted"
msgstr "압축 풀기 실패 또는 아카이브가 손상 되었습니다"

#: src/libslic3r/miniz_extension.cpp:113
msgid "compression failed"
msgstr "압축 실패"

#: src/libslic3r/miniz_extension.cpp:115
msgid "unexpected decompressed size"
msgstr "예기치 않은 압축 해제 크기"

#: src/libslic3r/miniz_extension.cpp:117
msgid "CRC-32 check failed"
msgstr "CRC-32 확인 실패"

#: src/libslic3r/miniz_extension.cpp:119
msgid "unsupported central directory size"
msgstr "지원 되지 않는 중앙 디렉터리 크기"

#: src/libslic3r/miniz_extension.cpp:121
msgid "allocation failed"
msgstr "할당 실패"

#: src/libslic3r/miniz_extension.cpp:123
msgid "file open failed"
msgstr "파일 열기 실패"

#: src/libslic3r/miniz_extension.cpp:125
msgid "file create failed"
msgstr "파일 만들기 실패"

#: src/libslic3r/miniz_extension.cpp:127
msgid "file write failed"
msgstr "파일 쓰기 실패"

#: src/libslic3r/miniz_extension.cpp:129
msgid "file read failed"
msgstr "파일 읽기 실패"

#: src/libslic3r/miniz_extension.cpp:131
msgid "file close failed"
msgstr "파일 닫기 실패"

#: src/libslic3r/miniz_extension.cpp:133
msgid "file seek failed"
msgstr "파일 검색 실패"

#: src/libslic3r/miniz_extension.cpp:135
msgid "file stat failed"
msgstr "파일 통계 실패"

#: src/libslic3r/miniz_extension.cpp:137
msgid "invalid parameter"
msgstr "잘못 된 매개 변수"

#: src/libslic3r/miniz_extension.cpp:139
msgid "invalid filename"
msgstr "잘못 된 파일 이름"

#: src/libslic3r/miniz_extension.cpp:141
msgid "buffer too small"
msgstr "버퍼가 너무 작음"

#: src/libslic3r/miniz_extension.cpp:143
msgid "internal error"
msgstr "내부 오류"

#: src/libslic3r/miniz_extension.cpp:145
msgid "file not found"
msgstr "파일을 찾을 수 없습니다."

#: src/libslic3r/miniz_extension.cpp:147
msgid "archive is too large"
msgstr "아카이브가 너무 큼"

#: src/libslic3r/miniz_extension.cpp:149
msgid "validation failed"
msgstr "유효성 검사 실패"

#: src/libslic3r/miniz_extension.cpp:151
msgid "write calledback failed"
msgstr "쓰기 다시 실패"

#: src/libslic3r/Print.cpp:446
msgid "All objects are outside of the print volume."
msgstr "모든 객체(object)가 인쇄 볼륨 외부에 있습니다."

#: src/libslic3r/Print.cpp:449
msgid "The supplied settings will cause an empty print."
msgstr "제공된 설정으로 인해 빈 인쇄가 발생합니다."

#: src/libslic3r/Print.cpp:453
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""
"일부 객체(object)가 너무 가깝습니다. 귀하의 압출기가 그들과 충돌합니다."

#: src/libslic3r/Print.cpp:455
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr "일부 객체(object)는 너무 크고 익스트루더 충돌없이 인쇄 할 수 없습니다."

#: src/libslic3r/Print.cpp:464
msgid ""
"Only a single object may be printed at a time in Spiral Vase mode. Either "
"remove all but the last object, or enable sequential mode by "
"\"complete_objects\"."
msgstr ""

#: src/libslic3r/Print.cpp:468
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""
"나선형 꽃병 옵션(Spiral Vase)은 단일 재료 객체(object)를 인쇄 할 때만 사용할 "
"수 있습니다."

#: src/libslic3r/Print.cpp:481
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""
"모든 압출기 의 노즐 직경이 동일하고 동일한 직경의 필라멘트를 사용하는 경우에"
"만 와이프 타워가 지원됩니다."

#: src/libslic3r/Print.cpp:487
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
"RepRapFirmware and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:489
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""
"와이프 타워는 현재 상대적 압출기 어드레싱 (use_relative_e_distances = 1)에서"
"만 지원됩니다."

#: src/libslic3r/Print.cpp:491
msgid "Ooze prevention is currently not supported with the wipe tower enabled."
msgstr ""
"현재 와이프 타워를 사용하도록 설정되어 있는 경우 스모즈 방지 기능이 지원되지 "
"않습니다."

#: src/libslic3r/Print.cpp:493
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr "와이프 타워는 현재 볼륨 E(use_volumetric_e=0)를 지원하지 않습니다."

#: src/libslic3r/Print.cpp:495
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr "와이프 타워는 현재 다중 재질 순차 인쇄에 지원되지 않습니다."

#: src/libslic3r/Print.cpp:516
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""
"와이프 타워 (Wipe Tower)는 같은 레이어 높이에 경우 여러 객체(object)에 대해서"
"만 지원됩니다"

#: src/libslic3r/Print.cpp:518
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""
"와이프 타워는 같은 수의 라프트 레이어 위에 인쇄 된 경우 여러 객체(object)에 "
"대해서만 지원됩니다"

#: src/libslic3r/Print.cpp:521
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"와이프 타워는 동일한 support_material_contact_distance로 인쇄 된 경우 여러 객"
"체(object)에 대해서만 지원됩니다"

#: src/libslic3r/Print.cpp:523
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""
"와이프 타워는 똑같이 슬라이스 된 경우 여러 객체(object)에 대해서만 지원됩니"
"다."

#: src/libslic3r/Print.cpp:536
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""
"모든 오브젝트의 가변 레이어 높이가 같은 경우에만 지우기 타워가 지원됩니다."

#: src/libslic3r/Print.cpp:558
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr "하나 이상의 객체(object)에 프린터에없는 압출기가 지정되었습니다."

#: src/libslic3r/Print.cpp:571
#, boost-format
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr "%1%=%2% mm가 너무 낮아 레이어 높이 %3% mm에서 인쇄할 수 없습니다."

#: src/libslic3r/Print.cpp:574
#, boost-format
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr "노즐 직경 %3% mm로 인쇄할 수 있는 과도한 %1%=%2% mm"

#: src/libslic3r/Print.cpp:585
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""
"노즐 지름이 다른 여러 압출기로 인쇄. 지원이 현재 압출기 "
"(support_material_extruder == 0 또는 support_material_interface_extruder == "
"0)로 인쇄되는 경우 모든 노즐은 동일한 지름이어야합니다."

#: src/libslic3r/Print.cpp:593
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""
"와이프 타워가 가용성 지지체와 함께 작동 하려면 서포트 레이어를 객체(object) "
"레이어와 동기화 해야 합니다."

#: src/libslic3r/Print.cpp:597
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"와이프 타워는 현재 공구 교체를 트리거하지 않고 현재의 압출기로 인쇄 하는 경우"
"에만 비가용성 서포트를 지원 합니다. (support_material_extruder과 "
"support_material_interface_extruder 모두 0으로 설정 해야 합니다.)"

#: src/libslic3r/Print.cpp:633
msgid "First layer height can't be greater than nozzle diameter"
msgstr "첫번째 레이어 높이는 노즐 직경보다 클 수 없습니다"

#: src/libslic3r/Print.cpp:638
msgid "Layer height can't be greater than nozzle diameter"
msgstr "레이어 높이는 노즐 직경보다 클 수 없습니다"

#: src/libslic3r/Print.cpp:792
msgid "Infilling layers"
msgstr "레이어 채우기"

#: src/libslic3r/Print.cpp:814
msgid "Generating skirt and brim"
msgstr ""

#: src/libslic3r/Print.cpp:862
msgid "Exporting G-code"
msgstr "G 코드 내보내기"

#: src/libslic3r/Print.cpp:866
msgid "Generating G-code"
msgstr "G 코드 생성"

#: src/libslic3r/SLA/Pad.cpp:533
msgid "Pad brim size is too small for the current configuration."
msgstr "패드 테두리 크기가 현재 구성에 너무 작습니다."

#: src/libslic3r/SLAPrint.cpp:628
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""
"서포트 포인트 없이 진행할 수 없습니다! 서포트 지점을 추가 하거나 서포트 생성"
"을 사용 하지 않도록 설정 합니다."

#: src/libslic3r/SLAPrint.cpp:640
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""
"객체의 고도가 너무 낮습니다. \"오브젝트 주위 패드\" 피쳐를 사용하여 고도 없"
"이 오브젝트를 인쇄합니다."

#: src/libslic3r/SLAPrint.cpp:646
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""
"서포트 기둥 끝은 객체(object)와 패드 사이의 간격에 배치됩니다. 이를 방지하기 "
"위해 '베이스 서포트 안전 거리'는 '패드 객체(object) 갭' 매개변수보다 커야 합"
"니다."

#: src/libslic3r/SLAPrint.cpp:661
msgid "Exposition time is out of printer profile bounds."
msgstr "박람회 시간이 프린터 프로파일 범위를 벗어났습니다."

#: src/libslic3r/SLAPrint.cpp:668
msgid "Initial exposition time is out of printer profile bounds."
msgstr "초기 박람회 시간이 프린터 프로파일 범위를 벗어났습니다."

#: src/libslic3r/SLAPrint.cpp:784
msgid "Slicing done"
msgstr "슬라이싱 완료"

#: src/libslic3r/SLAPrintSteps.cpp:45
msgid "Hollowing model"
msgstr "속이 빈 모델"

#: src/libslic3r/SLAPrintSteps.cpp:46
msgid "Drilling holes into model."
msgstr "모델에 구멍을 드릴링합니다."

#: src/libslic3r/SLAPrintSteps.cpp:47
msgid "Slicing model"
msgstr "슬라이싱 모델"

#: src/libslic3r/SLAPrintSteps.cpp:48 src/libslic3r/SLAPrintSteps.cpp:630
msgid "Generating support points"
msgstr "서포트 지점 생성"

#: src/libslic3r/SLAPrintSteps.cpp:49
msgid "Generating support tree"
msgstr "서포트 트리 생성"

#: src/libslic3r/SLAPrintSteps.cpp:50
msgid "Generating pad"
msgstr "패드 생성"

#: src/libslic3r/SLAPrintSteps.cpp:51
msgid "Slicing supports"
msgstr "슬라이싱 서포트즈"

#: src/libslic3r/SLAPrintSteps.cpp:66
msgid "Merging slices and calculating statistics"
msgstr "슬라이스 병합 및 통계 계산"

#: src/libslic3r/SLAPrintSteps.cpp:67
msgid "Rasterizing layers"
msgstr "레이어 래스터화"

#: src/libslic3r/SLAPrintSteps.cpp:426
msgid "Too many overlapping holes."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:433
msgid ""
"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:441
msgid "Unable to drill the current configuration of holes into the model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:461
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""
"메시에 구멍을 뚫는 데 실패했습니다. 이는 일반적으로 모델이 손상되어 발생합니"
"다. 먼저 해결해 보십시오."

#: src/libslic3r/SLAPrintSteps.cpp:467
msgid "Failed to drill some holes into the model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:511
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""
"내부 오류: 일치하지 않는 슬라이스 인덱스로 인해 슬라이싱을 중지해야 했습니다."

#: src/libslic3r/SLAPrintSteps.cpp:682 src/libslic3r/SLAPrintSteps.cpp:691
#: src/libslic3r/SLAPrintSteps.cpp:729
msgid "Visualizing supports"
msgstr "시각화 지원"

#: src/libslic3r/SLAPrintSteps.cpp:721
msgid "No pad can be generated for this model with the current configuration"
msgstr "현재 구성으로 이 모델에 대해 패드를 생성할 수 없습니다."

#: src/libslic3r/SLAPrintSteps.cpp:845
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""
"인쇄할 수 없는 개체가 있습니다. 지원 설정을 조정하여 개체를 인쇄할 수 있도록 "
"합니다."

#: src/libslic3r/PrintBase.cpp:84
msgid "Failed processing of the output_filename_format template."
msgstr "아래 output_filename_format 템플리트의 처리에 실패했습니다."

#: src/libslic3r/PrintConfig.cpp:223 src/libslic3r/PrintConfig.cpp:224
msgid "Printer technology"
msgstr "프린터 기술"

#: src/libslic3r/PrintConfig.cpp:231
msgid "Bed shape"
msgstr "배드 모양"

#: src/libslic3r/PrintConfig.cpp:236
msgid "Bed custom texture"
msgstr "배드 사용자 정의 질감"

#: src/libslic3r/PrintConfig.cpp:241
msgid "Bed custom model"
msgstr "배드 사용자 정의 모델"

#: src/libslic3r/PrintConfig.cpp:246
msgid "Elephant foot compensation"
msgstr "코끼리 발(Elephant foot) 보상값"

#: src/libslic3r/PrintConfig.cpp:248
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""
"첫 번째 레이어는 구성 요소 값에 따라 XY 평면에서 수축되어 일층 스 퀴시 코끼리"
"발(Elephant Foot) 효과를 보완합니다."

#: src/libslic3r/PrintConfig.cpp:256
msgid "G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:257
msgid ""
"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
"following format: \"XxY, XxY, ...\""
msgstr ""

#: src/libslic3r/PrintConfig.cpp:265
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"이 설정은 슬라이스/레이어의 높이(따라서 총 수)를 제어합니다. 얇은 층은 더 나"
"은 정확성을 제공하지만 인쇄하는 데는 더 많은 시간이 걸린다."

#: src/libslic3r/PrintConfig.cpp:272
msgid "Max print height"
msgstr "최대 프린트 높이"

#: src/libslic3r/PrintConfig.cpp:273
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr "인쇄 중에 익스트루더가 도달 할 수있는 최대 높이로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:281
msgid "Hostname, IP or URL"
msgstr "호스트 이름(Hostname), IP or URL"

#: src/libslic3r/PrintConfig.cpp:282
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:291
msgid "API Key / Password"
msgstr "API 키/암호"

#: src/libslic3r/PrintConfig.cpp:292
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"Slic3r는 프린터 호스트에 G 코드 파일을 업로드할 수 있습니다. 이 필드는 API "
"키 또는 인증에 필요한 암호를 포함 해야 합니다."

#: src/libslic3r/PrintConfig.cpp:300
msgid "Name of the printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:308
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""
"사용자 지정 CA 인증서 파일은 crt/pem 형식의 HTTPS 옥토 프린트 연결에 대해 지"
"정할 수 있습니다. 비워 두면 기본 OS CA 인증서 리포지토리가 사용 됩니다."

#: src/libslic3r/PrintConfig.cpp:324
msgid "Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:332
msgid "Ignore HTTPS certificate revocation checks"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:333
msgid ""
"Ignore HTTPS certificate revocation checks in case of missing or offline "
"distribution points. One may want to enable this option for self signed "
"certificates if connection fails."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:340
msgid "Printer preset names"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:341
msgid "Names of presets related to the physical printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:346
msgid "Authorization Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:351
msgid "API key"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:352
msgid "HTTP digest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:372
msgid "Avoid crossing perimeters"
msgstr "교체된 둘레를 피하세요."

#: src/libslic3r/PrintConfig.cpp:373
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"둘레의 교차를 최소화하기 위해 여행 이동을 최적화하십시오. 이것은 보잉 "
"(Bowling) 압출기가 흘러 나오기 쉬운 경우에 주로 유용합니다. 이 기능을 사용하"
"면 인쇄 및 G 코드 생성 속도가 느려집니다."

#: src/libslic3r/PrintConfig.cpp:380
msgid "Avoid crossing perimeters - Max detour length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:382
msgid ""
"The maximum detour length for avoid crossing perimeters. If the detour is "
"longer than this value, avoid crossing perimeters is not applied for this "
"travel path. Detour length could be specified either as an absolute value or "
"as percentage (for example 50%) of a direct travel path."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:385
msgid "mm or % (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:392 src/libslic3r/PrintConfig.cpp:2783
msgid "Other layers"
msgstr "다른 레이어"

#: src/libslic3r/PrintConfig.cpp:393
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""
"첫 번째 레이어 이후의 레이어 온도. 이 값을 0으로 설정하면 출력에서 ​​베드 온도 "
"제어 명령을 비활성화합니다."

#: src/libslic3r/PrintConfig.cpp:396
msgid "Bed temperature"
msgstr "배드 온도"

#: src/libslic3r/PrintConfig.cpp:403
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"이 사용자 정의 코드는 Z 이동 직전의 모든 레이어 변경에 삽입됩니다. [Slide3r] "
"설정과 [layer_num] 및 [layer_z]에 대한 자리 표시 자 변수를 사용할 수 있습니"
"다."

#: src/libslic3r/PrintConfig.cpp:413
msgid "Between objects G-code"
msgstr "객체(object) 간 G 코드"

#: src/libslic3r/PrintConfig.cpp:414
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""
"이 코드는 순차 인쇄를 사용할 때 객체(object)간에 삽입됩니다. 기본적으로 익스"
"트루더 및 베드 온도는 대기 모드가 아닌 명령을 사용하여 재설정됩니다. 그러나 "
"이 사용자 코드에서 M104, M109, M140 또는 M190이 감지되면 Slic3r은 온도 명령"
"을 추가하지 않습니다. 모든 Slic3r 설정에 자리 표시 변수를 사용할 수 있으므로 "
"원하는 위치에 \"M109 S [first_layer_temperature]\"명령을 넣을 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:425
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "바닥면에 생성 할 솔리드 레이어의 수."

#: src/libslic3r/PrintConfig.cpp:426
msgid "Bottom solid layers"
msgstr "바닥 단일 레이어"

#: src/libslic3r/PrintConfig.cpp:434
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""
"바닥 단색 층의 수는 바닥 쉘의 최소 두께를 만족시키기 위해 필요한 경우 "
"bottom_solid_layers 이상으로 증가한다."

#: src/libslic3r/PrintConfig.cpp:436
msgid "Minimum bottom shell thickness"
msgstr "최소 하단 쉘 두께"

#: src/libslic3r/PrintConfig.cpp:442
msgid "Bridge"
msgstr "브리지"

#: src/libslic3r/PrintConfig.cpp:443
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""
"이것은 프린터가 브릿지에 사용할 가속도입니다. 브리지의 가속 제어를 사용하지 "
"않으려면 0으로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:616
#: src/libslic3r/PrintConfig.cpp:1169 src/libslic3r/PrintConfig.cpp:1178
#: src/libslic3r/PrintConfig.cpp:1372 src/libslic3r/PrintConfig.cpp:1665
#: src/libslic3r/PrintConfig.cpp:1716 src/libslic3r/PrintConfig.cpp:1727
#: src/libslic3r/PrintConfig.cpp:1737 src/libslic3r/PrintConfig.cpp:1935
msgid "mm/s²"
msgstr "mm/s ²"

#: src/libslic3r/PrintConfig.cpp:451
msgid "Bridging angle"
msgstr "브릿지 각도"

#: src/libslic3r/PrintConfig.cpp:453
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"브리징 각도 오버라이드(override)값이. 왼쪽으로 0 일 경우 브리징 각도가 자동으"
"로 계산됩니다. 그렇지 않으면 제공된 각도가 모든 브리지에 사용됩니다. 각도 제"
"로는 180 °를 사용하십시오."

#: src/libslic3r/PrintConfig.cpp:456 src/libslic3r/PrintConfig.cpp:1075
#: src/libslic3r/PrintConfig.cpp:2226 src/libslic3r/PrintConfig.cpp:2236
#: src/libslic3r/PrintConfig.cpp:2527 src/libslic3r/PrintConfig.cpp:2768
#: src/libslic3r/PrintConfig.cpp:2985 src/libslic3r/PrintConfig.cpp:3546
#: src/libslic3r/PrintConfig.cpp:3667
msgid "°"
msgstr "°"

#: src/libslic3r/PrintConfig.cpp:462
msgid "Bridges fan speed"
msgstr "브릿지 팬 속도"

#: src/libslic3r/PrintConfig.cpp:463
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr "이 팬 속도는 모든 브릿지 및 오버행 중에 적용됩니다."

#: src/libslic3r/PrintConfig.cpp:464 src/libslic3r/PrintConfig.cpp:1087
#: src/libslic3r/PrintConfig.cpp:1553 src/libslic3r/PrintConfig.cpp:1745
#: src/libslic3r/PrintConfig.cpp:1808 src/libslic3r/PrintConfig.cpp:2059
#: src/libslic3r/PrintConfig.cpp:2118 src/libslic3r/PrintConfig.cpp:3171
#: src/libslic3r/PrintConfig.cpp:3460 src/libslic3r/PrintConfig.cpp:3586
msgid "%"
msgstr "%"

#: src/libslic3r/PrintConfig.cpp:471
msgid "Bridge flow ratio"
msgstr "브릿지 유량(flow)값"

#: src/libslic3r/PrintConfig.cpp:473
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"이 요인은 브리징을위한 플라스틱의 양에 영향을 미칩니다. 압출 성형물을 잡아 당"
"겨 처짐을 방지하기 위해 약간 줄일 수 있지만 기본 설정은 일반적으로 좋지만이 "
"문제를 해결하기 전에 냉각 (팬 사용)을 시도해야합니다."

#: src/libslic3r/PrintConfig.cpp:483
msgid "Bridges"
msgstr "브릿지(Bridges)"

#: src/libslic3r/PrintConfig.cpp:485
msgid "Speed for printing bridges."
msgstr "브릿지 인쇄 속도."

#: src/libslic3r/PrintConfig.cpp:486 src/libslic3r/PrintConfig.cpp:894
#: src/libslic3r/PrintConfig.cpp:902 src/libslic3r/PrintConfig.cpp:911
#: src/libslic3r/PrintConfig.cpp:919 src/libslic3r/PrintConfig.cpp:946
#: src/libslic3r/PrintConfig.cpp:965 src/libslic3r/PrintConfig.cpp:1306
#: src/libslic3r/PrintConfig.cpp:1490 src/libslic3r/PrintConfig.cpp:1572
#: src/libslic3r/PrintConfig.cpp:1648 src/libslic3r/PrintConfig.cpp:1682
#: src/libslic3r/PrintConfig.cpp:1694 src/libslic3r/PrintConfig.cpp:1704
#: src/libslic3r/PrintConfig.cpp:1767 src/libslic3r/PrintConfig.cpp:1826
#: src/libslic3r/PrintConfig.cpp:1966 src/libslic3r/PrintConfig.cpp:2193
#: src/libslic3r/PrintConfig.cpp:2202 src/libslic3r/PrintConfig.cpp:2733
#: src/libslic3r/PrintConfig.cpp:2883 src/libslic3r/PrintConfig.cpp:2893
msgid "mm/s"
msgstr "mm/s"

#: src/libslic3r/PrintConfig.cpp:493
msgid "Brim width"
msgstr "브림 폭"

#: src/libslic3r/PrintConfig.cpp:495
msgid ""
"The horizontal width of the brim that will be printed around each object on "
"the first layer. When raft is used, no brim is generated (use "
"raft_first_layer_expansion)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:504
msgid "Brim type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:506
msgid ""
"The places where the brim will be printed around each object on the first "
"layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:512
msgid "No brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:513
msgid "Outer brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:514
msgid "Inner brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:515
msgid "Outer and inner brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:520
msgid "Brim separation gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:522
msgid ""
"Offset of brim from the printed object. The offset is applied after the "
"elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:529
msgid "Clip multi-part objects"
msgstr "여러 부품(Part) 객체(object) 클립"

#: src/libslic3r/PrintConfig.cpp:530
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""
"다중 메터리얼(multi-material) 객체(object)를 인쇄 할 때이 설정을 사용하면 겹"
"치는 객체(object) 부품(Part)를 서로 겹쳐서 잘라낼 수 있습니다 (두 번째 부분"
"은 첫 번째 부분에서 클리핑되며 세 번째 부분은 첫 번째 및 두 번째 부분에서 잘"
"립니다)."

#: src/libslic3r/PrintConfig.cpp:537
msgid "Colorprint height"
msgstr "컬러 인쇄 높이"

#: src/libslic3r/PrintConfig.cpp:538
msgid "Heights at which a filament change is to occur."
msgstr "필라멘트 체인지가 발생 하는 높이."

#: src/libslic3r/PrintConfig.cpp:548
msgid "Compatible printers condition"
msgstr "호환 가능한 프린터 조건"

#: src/libslic3r/PrintConfig.cpp:549
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"활성 프린터 프로파일의 구성 값을 사용하는 부울 표현식. 이 표현식이 true로 평"
"가되면이 프로필은 활성 프린터 프로필과 호환되는 것으로 간주됩니다."

#: src/libslic3r/PrintConfig.cpp:563
msgid "Compatible print profiles condition"
msgstr "호환 되는 인쇄 프로 파일 조건"

#: src/libslic3r/PrintConfig.cpp:564
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"활성 인쇄 프로 파일의 구성 값을 사용하는 부울식입니다. 이 식이 true로 평가 되"
"면, 이 프로필이 활성 인쇄 프로필과 호환 되는 것으로 간주 됩니다."

#: src/libslic3r/PrintConfig.cpp:581
msgid "Complete individual objects"
msgstr "개별 객체(object) 완성"

#: src/libslic3r/PrintConfig.cpp:582
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"여러 객체(object) 또는 사본을 인쇄 할 때이 객체(object)는 다음 객체(object)"
"로 이동하기 전에 각 객체(object)를 완성합니다 (맨 아래 레이어에서 시작). 이 "
"기능은 인쇄물이 망가지는 위험을 피할 때 유용합니다. Slic3r은 압출기 충돌을 경"
"고하고 예방해야하지만 조재봉선하십시오."

#: src/libslic3r/PrintConfig.cpp:590
msgid "Enable auto cooling"
msgstr "자동 냉각 사용"

#: src/libslic3r/PrintConfig.cpp:591
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""
"이 플래그는 레이어 인쇄 시간에 따라 인쇄 속도와 팬 속도를 조정하는 자동 냉각 "
"논리를 활성화합니다."

#: src/libslic3r/PrintConfig.cpp:596
msgid "Cooling tube position"
msgstr "냉각 튜브 위치"

#: src/libslic3r/PrintConfig.cpp:597
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr "압출기 팁에서 냉각 튜브의 중재봉선점까지의 거리 "

#: src/libslic3r/PrintConfig.cpp:604
msgid "Cooling tube length"
msgstr "냉각 튜브 길이"

#: src/libslic3r/PrintConfig.cpp:605
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr "내부의 냉각 이동을 위해 공간을 제한하는 냉각 튜브의 길이 "

#: src/libslic3r/PrintConfig.cpp:613
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""
"역할 별 가속도 값이 사용 된 후에 프린터가 재설정되는 속도입니다 (둘레 / 충"
"전). 가속을 전혀 재설정하지 않으려면 0으로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:622
msgid "Default filament profile"
msgstr "기본 필라멘트 프로파일"

#: src/libslic3r/PrintConfig.cpp:623
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"현재 프린터 프로파일과 연관된 기본 필라멘트 프로파일. 현재 프린터 프로파일을 "
"선택하면 이 필라멘트 프로파일이 활성화됩니다."

#: src/libslic3r/PrintConfig.cpp:629
msgid "Default print profile"
msgstr "기본 인쇄 프로파일"

#: src/libslic3r/PrintConfig.cpp:630 src/libslic3r/PrintConfig.cpp:3390
#: src/libslic3r/PrintConfig.cpp:3401
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"현재 프린터 프로파일과 연관된 기본 인쇄 프로파일. 현재 프린터 프로파일을 선택"
"하면이 인쇄 프로파일이 활성화됩니다."

#: src/libslic3r/PrintConfig.cpp:636
msgid "Disable fan for the first"
msgstr "첫 번째 팬 사용 중지"

#: src/libslic3r/PrintConfig.cpp:637
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"이 값을 양수 값으로 설정하면 첫 번째 레이어에서 팬을 사용하지 않도록 설정하"
"여 접착력을 악화시키지 않습니다."

#: src/libslic3r/PrintConfig.cpp:646
msgid "Don't support bridges"
msgstr "서포트와 브릿지를 사용하지 않음"

#: src/libslic3r/PrintConfig.cpp:648
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""
"브릿지 영역 아래에 서포팅 재료가 생성되는 것을 방지하기위한 실험적 옵션."

#: src/libslic3r/PrintConfig.cpp:654
msgid "Distance between copies"
msgstr "복사본 간 거리"

#: src/libslic3r/PrintConfig.cpp:655
msgid "Distance used for the auto-arrange feature of the plater."
msgstr "플래이터(plater)의 자동 정렬 기능에 사용되는 거리입니다."

#: src/libslic3r/PrintConfig.cpp:663
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""
"이 끝 프로시저는 출력 파일의 끝에 삽입됩니다. 모든 PrusaSlicer 설정에 자리 표"
"시자 변수를 사용할 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:673
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""
"이 끝 프로시저는 프린터가 gcode를 종료하기 전에 출력 파일의 끝에 삽입됩니다"
"(다중 재질 프린터의 경우 이 필라멘트에서 공구를 변경하기 전에). 모든 "
"PrusaSlicer 설정에 자리 표시자 변수를 사용할 수 있습니다. 압출기가 여러 개 있"
"는 경우 gcode는 압출기 순서로 처리됩니다."

#: src/libslic3r/PrintConfig.cpp:684
msgid "Ensure vertical shell thickness"
msgstr "수직 쉘(shell) 두께 확인"

#: src/libslic3r/PrintConfig.cpp:686
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""
"경사 표면 근처에 솔리드 인필을 추가하여 수직 셸 두께(상단+하단 솔리드 레이어)"
"를 보장하십시오."

#: src/libslic3r/PrintConfig.cpp:692
msgid "Top fill pattern"
msgstr "상단 채우기 패턴"

#: src/libslic3r/PrintConfig.cpp:694
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""
"상단 채우기의 채우기 패턴. 이는 인접 한 솔리드 쉘이 아니라 보이는 상위 레이어"
"에만 영향을 줍니다."

#: src/libslic3r/PrintConfig.cpp:704 src/libslic3r/PrintConfig.cpp:1144
#: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:2715
msgid "Rectilinear"
msgstr "직선면(Rectilinear)"

#: src/libslic3r/PrintConfig.cpp:705
msgid "Monotonic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:706 src/libslic3r/PrintConfig.cpp:1145
msgid "Aligned Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:707 src/libslic3r/PrintConfig.cpp:1151
#: src/libslic3r/PrintConfig.cpp:2716
msgid "Concentric"
msgstr "동심원(Concentric)"

#: src/libslic3r/PrintConfig.cpp:708 src/libslic3r/PrintConfig.cpp:1155
msgid "Hilbert Curve"
msgstr "힐버트 곡선(Hilbert Curve)"

#: src/libslic3r/PrintConfig.cpp:709 src/libslic3r/PrintConfig.cpp:1156
msgid "Archimedean Chords"
msgstr "아르키메데우스(Archimedean Chords)"

#: src/libslic3r/PrintConfig.cpp:710 src/libslic3r/PrintConfig.cpp:1157
msgid "Octagram Spiral"
msgstr "옥타그램 나선(Octagram Spiral)"

#: src/libslic3r/PrintConfig.cpp:716
msgid "Bottom fill pattern"
msgstr "아래쪽 채우기 패턴"

#: src/libslic3r/PrintConfig.cpp:718
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""
"하단 채우기의 채우기 패턴. 이는 인접 한 솔리드 쉘이 아니라 아래쪽에 보이는 외"
"부 레이어에만 영향을 줍니다."

#: src/libslic3r/PrintConfig.cpp:727 src/libslic3r/PrintConfig.cpp:739
msgid "External perimeters"
msgstr "외측 둘레"

#: src/libslic3r/PrintConfig.cpp:729
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""
"외부 경계에 대한 수동 압출 폭을 설정하려면 이 값을 0이 아닌 값으로 설정하십시"
"오. 0인 경우 기본 압출 너비가 사용되며, 그렇지 않으면 1.125 x 노즐 직경이 사"
"용된다. 백분율(예: 200%)로 표현되는 경우, 레이어 높이에 걸쳐 계산됩니다."

#: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:843
#: src/libslic3r/PrintConfig.cpp:1200 src/libslic3r/PrintConfig.cpp:1397
#: src/libslic3r/PrintConfig.cpp:1454 src/libslic3r/PrintConfig.cpp:1481
#: src/libslic3r/PrintConfig.cpp:1955 src/libslic3r/PrintConfig.cpp:2341
#: src/libslic3r/PrintConfig.cpp:2515 src/libslic3r/PrintConfig.cpp:2604
#: src/libslic3r/PrintConfig.cpp:2839
msgid "mm or %"
msgstr "mm/s 또는 %"

#: src/libslic3r/PrintConfig.cpp:741
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"이 별도의 설정은 외부 경계선(시각적 경계선)의 속도에 영향을 미친다. 백분율"
"(예: 80%)로 표현되는 경우 위의 Perimeter 속도 설정에 따라 계산된다. 자동을 위"
"해 0으로 설정한다."

#: src/libslic3r/PrintConfig.cpp:744 src/libslic3r/PrintConfig.cpp:1222
#: src/libslic3r/PrintConfig.cpp:1233 src/libslic3r/PrintConfig.cpp:2300
#: src/libslic3r/PrintConfig.cpp:2353 src/libslic3r/PrintConfig.cpp:2684
#: src/libslic3r/PrintConfig.cpp:2853
msgid "mm/s or %"
msgstr "mm/s 또는 %"

#: src/libslic3r/PrintConfig.cpp:751
msgid "External perimeters first"
msgstr "외부 경계선 먼저"

#: src/libslic3r/PrintConfig.cpp:753
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""
"기본 역순 대신 가장 바깥쪽부터 가장 안쪽까지 윤곽선을 인쇄하십시오. 타겟 TTS"
"복사하기번역 저장번역 저장번역 수정."

#: src/libslic3r/PrintConfig.cpp:759
msgid "Extra perimeters if needed"
msgstr "필요한 경우 추가 둘레"

#: src/libslic3r/PrintConfig.cpp:761
#, no-c-format, no-boost-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""
"경사 벽의 틈을 피하기 위해 필요한 경우 더 많은 둘래(perimeter)를 추가하십시"
"오. 위의 루프의 70% of 이상이 지지될 때까지 Slic3r는 계속해서 둘ㄹ를 추가한"
"다."

#: src/libslic3r/PrintConfig.cpp:771
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"사용할 압출부(더 구체적인 압출부 설정이 지정되지 않은 경우) 이 값은 경계 및 "
"압출부를 초과하지만 지원 압출자를 주입하지는 않는다."

#: src/libslic3r/PrintConfig.cpp:783
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""
"이것을 노즐 팁과 (일반적으로) X 캐리지 로드 사이의 수직 거리로 설정하십시오. "
"다시 말하면, 이것은 당신의 압출기 주위의 틈새 실린더의 높이이며, 그것은 다른 "
"인쇄된 개체와 충돌하기 전에 압출기가 엿볼 수 있는 최대 깊이를 나타낸다."

#: src/libslic3r/PrintConfig.cpp:794
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""
"이것을 당신의 압출기 주변의 간극 반경으로 설정하시오. 압출부가 중앙에 있지 않"
"으면 안전을 위해 가장 큰 값을 선택하십시오. 이 설정은 충돌 여부를 확인하고 플"
"래터에 그래픽 미리 보기를 표시하기 위해 사용된다."

#: src/libslic3r/PrintConfig.cpp:804
msgid "Extruder Color"
msgstr "익스트루더 컬러"

#: src/libslic3r/PrintConfig.cpp:805 src/libslic3r/PrintConfig.cpp:868
#: src/libslic3r/PrintConfig.cpp:3242
msgid "This is only used in the Slic3r interface as a visual help."
msgstr "이것은 시각적 도움말로 Slic3r 접점에서만 사용된다."

#: src/libslic3r/PrintConfig.cpp:811
msgid "Extruder offset"
msgstr "익스트루더 오프셋"

#: src/libslic3r/PrintConfig.cpp:812
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"펌웨어가 압출기 위치 변경을 처리하지 못하면 G 코드를 고려해야합니다. 이 옵션"
"을 사용하면 첫 번째 것에 대한 각 압출기의 변위를 지정할 수 있습니다. 양의 좌"
"표가 필요합니다 (XY 좌표에서 뺍니다)."

#: src/libslic3r/PrintConfig.cpp:821
msgid "Extrusion axis"
msgstr "압출 축"

#: src/libslic3r/PrintConfig.cpp:822
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"이 옵션을 사용하여 프린터의 압출기에 연결된 축 문자를 설정합니다 (보통 E이지"
"만 일부 프린터는 A를 사용합니다)."

#: src/libslic3r/PrintConfig.cpp:827
msgid "Extrusion multiplier"
msgstr "압출 승수"

#: src/libslic3r/PrintConfig.cpp:828
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"이 요소는 비례하여 유량의 양을 변경합니다. 멋진 서페이스 마무리와 단일 벽 너"
"비를 얻기 위해이 설정을 조정해야 할 수도 있습니다. 일반적인 값은 0.9와 1.1 사"
"이입니다. 이 값을 더 변경해야한다고 판단되면 필라멘트 직경과 펌웨어 E 단계를 "
"확인하십시오."

#: src/libslic3r/PrintConfig.cpp:837
msgid "Default extrusion width"
msgstr "기본 압출 폭"

#: src/libslic3r/PrintConfig.cpp:839
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""
"수동 압출 폭을 허용하려면이 값을 0이 아닌 값으로 설정하십시오. 0으로 남겨두"
"면 Slic3r은 노즐 직경에서 압출 폭을 도출합니다 (주변 압출 폭, 성형 압출 폭 등"
"의 툴팁 참조). 백분율로 표시되는 경우 (예 : 230 %) 레이어 높이를 기준으로 계"
"산됩니다."

#: src/libslic3r/PrintConfig.cpp:851
msgid "Keep fan always on"
msgstr "항상 팬 켜기"

#: src/libslic3r/PrintConfig.cpp:852
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""
"이 기능을 사용하면 팬이 비활성화되지 않으며 최소한 최소 속도로 계속 회전합니"
"다. PLA에 유용하며 ABS에 해롭다."

#: src/libslic3r/PrintConfig.cpp:857
msgid "Enable fan if layer print time is below"
msgstr "레이어 인쇄 시간이 미만인 경우 팬 활성화"

#: src/libslic3r/PrintConfig.cpp:858
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""
"레이어 인쇄 시간이이 초 미만으로 예상되는 경우 팬이 활성화되고 속도는 최소 "
"및 최대 속도를 보간하여 계산됩니다."

#: src/libslic3r/PrintConfig.cpp:860 src/libslic3r/PrintConfig.cpp:2288
msgid "approximate seconds"
msgstr "근사치 초"

#: src/libslic3r/PrintConfig.cpp:867 src/libslic3r/PrintConfig.cpp:3241
msgid "Color"
msgstr "색상"

#: src/libslic3r/PrintConfig.cpp:873
msgid "Filament notes"
msgstr "필라멘트 메모"

#: src/libslic3r/PrintConfig.cpp:874
msgid "You can put your notes regarding the filament here."
msgstr "여기에 필라멘트에 관한 메모를 넣을 수 있다."

#: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:1773
msgid "Max volumetric speed"
msgstr "최대 체적 속도"

#: src/libslic3r/PrintConfig.cpp:883
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"이 필라멘트에 허용되는 최대 체적 속도. 인쇄물의 최대 체적 속도를 인쇄 및 필라"
"멘트 체적 속도 최소로 제한한다. 제한 없음에 대해 0으로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:892
msgid "Loading speed"
msgstr "로딩 속도"

#: src/libslic3r/PrintConfig.cpp:893
msgid "Speed used for loading the filament on the wipe tower."
msgstr "와이퍼 타워(wipe)에 필라멘트를 장착하는 데 사용되는 속도. "

#: src/libslic3r/PrintConfig.cpp:900
msgid "Loading speed at the start"
msgstr "시작시 로딩 속도"

#: src/libslic3r/PrintConfig.cpp:901
msgid "Speed used at the very beginning of loading phase."
msgstr "로딩 단계의 시작에 사용 되는 속도."

#: src/libslic3r/PrintConfig.cpp:908
msgid "Unloading speed"
msgstr "언로딩 스피드"

#: src/libslic3r/PrintConfig.cpp:909
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""
"와이퍼 타워에서 필라멘트를 언로드하는 데 사용되는 속도(램핑 후 바로 언로딩의 "
"초기 부분에는 영향을 주지 않음)."

#: src/libslic3r/PrintConfig.cpp:917
msgid "Unloading speed at the start"
msgstr "시작 시 언로드 속도"

#: src/libslic3r/PrintConfig.cpp:918
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr "속도는 램 밍 직후 필 라 멘 트의 팁을 언로딩 하는 데 사용 됩니다."

#: src/libslic3r/PrintConfig.cpp:925
msgid "Delay after unloading"
msgstr "언로드 후 딜레이"

#: src/libslic3r/PrintConfig.cpp:926
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""
"필라멘트를 내린 후 기다리는 시간. 원래 치수로 축소하는 데, 더 많은 시간이 필"
"요할 수 있는 유연한 재료로 신뢰할 수있는 공구 교환을 얻을 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:935
msgid "Number of cooling moves"
msgstr "쿨링 이동 숫자"

#: src/libslic3r/PrintConfig.cpp:936
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""
"필라멘트는 쿨링 튜브에서 앞뒤로 이동 하여 냉각 됩니다. 이러한 이동의 원하는 "
"값을 지정 합니다."

#: src/libslic3r/PrintConfig.cpp:944
msgid "Speed of the first cooling move"
msgstr "첫 번째 냉각 이동 속도"

#: src/libslic3r/PrintConfig.cpp:945
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr "냉각 속도가 서서히 빨라지고 있습니다."

#: src/libslic3r/PrintConfig.cpp:952
msgid "Minimal purge on wipe tower"
msgstr "와이프(wipe) 탑의 최소 퍼지"

#: src/libslic3r/PrintConfig.cpp:953
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"공구가 변경 된 후 노즐 내부에 새로 로드 된 필라멘트의 정확한 위치를 알 수 없"
"으며, 필라멘트 압력이 아직 안정적이지 않을 수 있습니다. 프린트 헤드를 인필 또"
"는 희생(sacrificial) 객체(object)로 소거 하기 전에 Slic3r는 항상이 양의 재료"
"를 와이프 탑에 넣어 연속적인 채우기 또는 희생(sacrificial) 객체(object) 돌출"
"을 안정적으로 생성 합니다."

#: src/libslic3r/PrintConfig.cpp:957
msgid "mm³"
msgstr "mm ³"

#: src/libslic3r/PrintConfig.cpp:963
msgid "Speed of the last cooling move"
msgstr "마지막 냉각 이동 속도"

#: src/libslic3r/PrintConfig.cpp:964
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr "냉각은 이 속도쪽으로 점차 가속화되고 있습니다. "

#: src/libslic3r/PrintConfig.cpp:971
msgid "Filament load time"
msgstr "필라멘트 로드 시간"

#: src/libslic3r/PrintConfig.cpp:972
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"프린터 펌웨어 (또는 MMU 2.0)가 공구를 변경하는 동안(T 코드를 실행할 때) 새필"
"라멘트를 로드하는 시간입니다. 이 시간은 G 코드 시간 추정기에 의해 총 인쇄 시"
"간에 추가 됩니다."

#: src/libslic3r/PrintConfig.cpp:979
msgid "Ramming parameters"
msgstr "래밍 파라미터"

#: src/libslic3r/PrintConfig.cpp:980
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""
"이 문자열은 RammingDialog에 의해 편집되고 래밍 특정 매개 변수를 포함합니다."

#: src/libslic3r/PrintConfig.cpp:986
msgid "Filament unload time"
msgstr "필라멘트 언로드 시간"

#: src/libslic3r/PrintConfig.cpp:987
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"프린터 펌웨어 (또는 MMU2.0)가 공구 교환 중에 필라멘트를 언로드하기 위한 시간"
"입니다 (T 코드를 실행할 때). 이 시간은 G 코드 시간추정기에 의해 총 인쇄 시간"
"에 추가 됩니다."

#: src/libslic3r/PrintConfig.cpp:995
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"여기에 필라멘트 직경을 입력하십시오. 정밀도가 필요하므로 캘리퍼를 사용하여 필"
"라멘트를 따라 여러 번 측정 한 다음 평균을 계산하십시오."

#: src/libslic3r/PrintConfig.cpp:1002 src/libslic3r/PrintConfig.cpp:3280
#: src/libslic3r/PrintConfig.cpp:3281
msgid "Density"
msgstr "밀도"

#: src/libslic3r/PrintConfig.cpp:1003
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"여기서 필라멘트 밀도를 입력하십시오. 이것은 통계 정보 용입니다. 괜찮은 방법"
"은 알려진 길이의 필라멘트의 무게를 측정하고 길이와 볼륨의 비율을 계산하는 것"
"입니다. 변위를 통해 직접적으로 부피를 계산하는 것이 더 좋습니다."

#: src/libslic3r/PrintConfig.cpp:1006
msgid "g/cm³"
msgstr "g/cm³"

#: src/libslic3r/PrintConfig.cpp:1011
msgid "Filament type"
msgstr "필라멘트 타입"

#: src/libslic3r/PrintConfig.cpp:1012
msgid "The filament material type for use in custom G-codes."
msgstr "사용자 지정 G 코드에 사용할 필라멘트재료 유형입니다."

#: src/libslic3r/PrintConfig.cpp:1039
msgid "Soluble material"
msgstr "수용성 재료"

#: src/libslic3r/PrintConfig.cpp:1040
msgid "Soluble material is most likely used for a soluble support."
msgstr "수용성 재료눈 물에 녹는 서포트에 가장 많이 사용된다."

#: src/libslic3r/PrintConfig.cpp:1046
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr "필라멘트(kg당) 비용을 여기에 입력하십시오. 통계를 내기 위해서 입니다."

#: src/libslic3r/PrintConfig.cpp:1047
msgid "money/kg"
msgstr "원(\\)/kg"

#: src/libslic3r/PrintConfig.cpp:1052
msgid "Spool weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1053
msgid ""
"Enter weight of the empty filament spool. One may weigh a partially consumed "
"filament spool before printing and one may compare the measured weight with "
"the calculated weight of the filament with the spool to find out whether the "
"amount of filament on the spool is sufficient to finish the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1057
msgid "g"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1066 src/libslic3r/PrintConfig.cpp:3385
msgid "(Unknown)"
msgstr "(알 수 없음)"

#: src/libslic3r/PrintConfig.cpp:1070
msgid "Fill angle"
msgstr "채움 각도"

#: src/libslic3r/PrintConfig.cpp:1072
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"본 오리엔테이션 방향의 기본 각도입니다. 해칭이 적용될 것입니다. Slic3r이 감"
"지 할 수있는 최상의 방향을 사용하여 브릿징이 채워지므로이 설정은 영향을 미치"
"지 않습니다."

#: src/libslic3r/PrintConfig.cpp:1084
msgid "Fill density"
msgstr "채우기(fill) 밀도"

#: src/libslic3r/PrintConfig.cpp:1086
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr "0 % - 100 % 범위로 표현 된 내부 채움(infill)의 밀도."

#: src/libslic3r/PrintConfig.cpp:1121
msgid "Fill pattern"
msgstr "채우기(fill) 패턴"

#: src/libslic3r/PrintConfig.cpp:1123
msgid "Fill pattern for general low-density infill."
msgstr "일반 낮은 밀도 채움의 패턴."

#: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:2747
msgid "Grid"
msgstr "그리드(Grid)"

#: src/libslic3r/PrintConfig.cpp:1148
msgid "Stars"
msgstr "별(Stars)"

#: src/libslic3r/PrintConfig.cpp:1149
msgid "Cubic"
msgstr "큐빅"

#: src/libslic3r/PrintConfig.cpp:1150
msgid "Line"
msgstr "선(Line)"

#: src/libslic3r/PrintConfig.cpp:1152 src/libslic3r/PrintConfig.cpp:2700
msgid "Honeycomb"
msgstr "벌집"

#: src/libslic3r/PrintConfig.cpp:1153
msgid "3D Honeycomb"
msgstr "3D 벌집"

#: src/libslic3r/PrintConfig.cpp:1154
msgid "Gyroid"
msgstr "자이로이드(Gyroid)"

#: src/libslic3r/PrintConfig.cpp:1158
msgid "Adaptive Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1159
msgid "Support Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1161
msgid "Lightning"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1167
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""
"이것은 프린터가 첫 번째 레이어에 사용할 가속도입니다. 0을 설정하면 첫 번째 레"
"이어에 대한 가속 제어가 사용되지 않습니다."

#: src/libslic3r/PrintConfig.cpp:1175
msgid "First object layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1176
msgid ""
"This is the acceleration your printer will use for first layer of object "
"above raft interface. Set zero to disable acceleration control for first "
"layer of object above raft interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1185
msgid "First layer bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1186
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""
"첫 번째 레이어에 대한 빌드 플레이트 온도를 가열. 이 값을 0으로 설정하면 출력"
"에서 ​​베드 온도 제어 명령을 비활성화합니다."

#: src/libslic3r/PrintConfig.cpp:1196
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""
"첫 번째 레이어의 수동 압출 폭을 설정하려면이 값을 0이 아닌 값으로 설정합니"
"다. 이 방법을 사용하면보다 우수한 접착력을 위해 더 두꺼운 압출 성형물을 만들 "
"수 있습니다. 백분율 (예 : 120 %)로 표현하면 첫 번째 레이어 높이를 기준으로 계"
"산됩니다. 0으로 설정하면 기본 압출 폭이 사용됩니다."

#: src/libslic3r/PrintConfig.cpp:1210
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1218
msgid "First layer speed"
msgstr "첫 레이어 속도"

#: src/libslic3r/PrintConfig.cpp:1219
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""
"절대값(mm/s)으로 표현되는 경우, 이 속도는 유형에 관계없이 첫 번째 층의 모든 "
"인쇄 이동에 적용된다. 백분율(예: 40%)로 표현되는 경우 기본 속도를 스케일링한"
"다."

#: src/libslic3r/PrintConfig.cpp:1229
msgid "Speed of object first layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1230
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first object layer above raft interface, regardless "
"of their type. If expressed as a percentage (for example: 40%) it will scale "
"the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1240
msgid "First layer nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1241
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1249
msgid "Full fan speed at layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1250
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than "
"\"disable_fan_first_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1262
msgid "Fuzzy skin type."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1269
msgid "Outside walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1270
msgid "All walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1275
msgid "Fuzzy skin thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1277
msgid ""
"The maximum distance that each skin point can be offset (both ways), "
"measured perpendicular to the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1285
msgid "Fuzzy skin point distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1287
msgid ""
"Perimeters will be split into multiple segments by inserting Fuzzy skin "
"points. Lowering the Fuzzy skin point distance will increase the number of "
"randomly offset points on the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1295
msgid "Fill gaps"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1297
msgid ""
"Enables filling of gaps between perimeters and between the inner most "
"perimeters and infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1304
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""
"짧은 지그재그로 작은 틈을 메우기 위한 속도. 너무 많은 진동과 공진 문제를 피하"
"기 위해 이것을 합리적으로 낮게 유지한다. 간격 채우기를 사용하지 않으려면 0을 "
"설정하십시오."

#: src/libslic3r/PrintConfig.cpp:1312
msgid "Verbose G-code"
msgstr "세부 G-code"

#: src/libslic3r/PrintConfig.cpp:1313
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"설명 텍스트로 설명되는 각 행과 함께 코멘트된 G-code 파일을 가져오려면 이 옵션"
"을 선택하십시오. 만일 당신이 SD카드로 인쇄한다면, 파일의 추가 무게로 인해 펌"
"웨어의 속도가 느려질 수 있다."

#: src/libslic3r/PrintConfig.cpp:1320
msgid "G-code flavor"
msgstr "G-code 형식"

#: src/libslic3r/PrintConfig.cpp:1321
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""
"온도 제어 및 기타 를 포함한 일부 G/M 코드 명령은 범용이 아닙니다. 호환되는 출"
"력을 얻으려면 프린터의 펌웨어로 이 옵션을 설정합니다. \"돌출 없음\" 맛은 "
"PrusaSlicer가 압출 값을 전혀 내보내지 못하게 합니다."

#: src/libslic3r/PrintConfig.cpp:1348
msgid "No extrusion"
msgstr "압출 없음"

#: src/libslic3r/PrintConfig.cpp:1353
msgid "Label objects"
msgstr "레이블 객체(object)"

#: src/libslic3r/PrintConfig.cpp:1354
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""
"이 기능을 사용 하 여 G 코드 레이블 인쇄에 주석이 속해 있는 객체(object)와 함"
"께 이동 하 여 주석을 추가할 수 있으며,이는 옥 토 프린트 캔 커 작업 플러그인"
"에 유용 합니다. 이 설정은 단일 압출 기 다중 재료 설정과 호환 되지 않으며 객체"
"(object)를 닦아 내 고 채우기로 닦습니다."

#: src/libslic3r/PrintConfig.cpp:1361
msgid "High extruder current on filament swap"
msgstr "필라멘트스왑에 높은 압출 기 전류"

#: src/libslic3r/PrintConfig.cpp:1362
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"필라멘트 교환 동안 압출기 모터 전류를 증가 시키는 것이 유리할 수 있으며, 이"
"는 빠른 래밍 공급 속도를 가능 하게하고, 불규칙한 모양의 필라멘트를 로딩할때 "
"저항을 극복하기 위한것이다."

#: src/libslic3r/PrintConfig.cpp:1370
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""
"이것은 당신 프린터의 채움 가속력이다. 주입에 대한 가속 제어를 비활성화하려면 "
"0을 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:1378
msgid "Combine infill every"
msgstr "다음 레이어마다 결합"

#: src/libslic3r/PrintConfig.cpp:1380
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"이 기능은 인필을 결합하고 얇은 주변기기를 보존하면서 두꺼운 인필 층을 압출하"
"여 인쇄 속도를 높일 수 있도록 하여 정확도를 높인다."

#: src/libslic3r/PrintConfig.cpp:1383
msgid "Combine infill every n layers"
msgstr "모든 n개 층을 채우기 위해 결합"

#: src/libslic3r/PrintConfig.cpp:1389
msgid "Length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1391
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than infill_anchor_max is found, the infill line is "
"connected to a perimeter segment at just one side and the length of the "
"perimeter segment taken is limited to this parameter, but no longer than "
"anchor_length_max. Set this parameter to zero to disable anchoring "
"perimeters connected to a single infill line."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1407
msgid "0 (no open anchors)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1408 src/libslic3r/PrintConfig.cpp:1431
msgid "1 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1432
msgid "2 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1410 src/libslic3r/PrintConfig.cpp:1433
msgid "5 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1411 src/libslic3r/PrintConfig.cpp:1434
msgid "10 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1412 src/libslic3r/PrintConfig.cpp:1435
msgid "1000 (unlimited)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1417
msgid "Maximum length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1419
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than this parameter is found, the infill line is connected "
"to a perimeter segment at just one side and the length of the perimeter "
"segment taken is limited to infill_anchor, but no longer than this "
"parameter. Set this parameter to zero to disable anchoring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1430
msgid "0 (not anchored)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1440
msgid "Infill extruder"
msgstr "채움(Infill) 익스트루더"

#: src/libslic3r/PrintConfig.cpp:1442
msgid "The extruder to use when printing infill."
msgstr "채움으로 사용할 익스트루더."

#: src/libslic3r/PrintConfig.cpp:1450
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"채움에 수동 압출 폭을 설정하려면이 값을 0이 아닌 값으로 설정합니다. 0으로 설"
"정하면 설정된 경우 기본 압출 폭이 사용되고 그렇지 않으면 1.125 x 노즐 직경이 "
"사용됩니다. 채움 속도를 높이고 부품(Part)을 더 강하게 만들려면보다 큰 압출 성"
"형물을 사용하는 것이 좋습니다. 백분율 (예 : 90 %)로 표현하면 레이어 높이를 기"
"준으로 계산됩니다."

#: src/libslic3r/PrintConfig.cpp:1461
msgid "Infill before perimeters"
msgstr "둘레보다 앞쪽에 채움"

#: src/libslic3r/PrintConfig.cpp:1462
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr "이 옵션은 외부출력과 채움 인쇄 순서를 바꾸어, 후자를 먼저 만든다."

#: src/libslic3r/PrintConfig.cpp:1467
msgid "Only infill where needed"
msgstr "필요한 경우 채움"

#: src/libslic3r/PrintConfig.cpp:1469
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""
"이 옵션은 천장 지원에 실제로 필요한 영역에만 적용된다(내부 서포트 재료 역할"
"을 할 것이다). 활성화된 경우 관련된 여러 번의 점검으로 인해 G-code 생성 속도"
"를 늦춰라."

#: src/libslic3r/PrintConfig.cpp:1476
msgid "Infill/perimeters overlap"
msgstr "채움/둘레 겹침(perimeters overlap)"

#: src/libslic3r/PrintConfig.cpp:1478
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"이 설정은 더 나은 본딩을 위해 충전 및 둘레 사이에 추가 겹침을 적용합니다. 이"
"론적으로 이것은 필요하지 않아야하지만 백래시가 갭을 유발할 수 있습니다. 백분"
"율 (예 : 15 %)로 표시되는 경우 경계 압출 폭을 기준으로 계산됩니다."

#: src/libslic3r/PrintConfig.cpp:1489
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr "내부 채우기 인쇄 속도. 자동으로 0으로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:1497
msgid "Inherits profile"
msgstr "프로필 상속"

#: src/libslic3r/PrintConfig.cpp:1498
msgid "Name of the profile, from which this profile inherits."
msgstr "이 프로파일이 상속되는 프로파일의 이름."

#: src/libslic3r/PrintConfig.cpp:1511
msgid "Interface shells"
msgstr "접점 셸(shells)"

#: src/libslic3r/PrintConfig.cpp:1512
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"인접 재료/볼륨 사이에 고체 쉘 생성을 강제하십시오. 반투명 재료 또는 수동 수용"
"성 서포트 재료를 사용한 다중 압ㅊ기 인쇄에 유용함."

#: src/libslic3r/PrintConfig.cpp:1520
msgid "Maximum width of a segmented region"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1521
msgid "Maximum width of a segmented region. Zero disables this feature."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1522 src/libslic3r/PrintConfig.cpp:2133
#: src/libslic3r/PrintConfig.cpp:2142
msgid "mm (zero to disable)"
msgstr "mm (0은 비활성화)"

#: src/libslic3r/PrintConfig.cpp:1529
msgid "Enable ironing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1530
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1536 src/libslic3r/PrintConfig.cpp:1538
msgid "Ironing Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1543
msgid "All top surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1544
msgid "Topmost surface only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1545
msgid "All solid surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1550
msgid "Flow rate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1552
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1560
msgid "Spacing between ironing passes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1562
msgid "Distance between ironing lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1579
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"이 사용자 정의 코드는 Z 이동 직후와 압출부가 첫 번째 레이어 포인트로 이동하"
"기 전에 모든 레이어 변경 시 삽입된다. 모든 Slic3r 설정뿐만 아니라 "
"[layer_num] 및 [layer_z]에 자리 표시자 변수를 사용할 수 있다는 점에 유의하십"
"시오."

#: src/libslic3r/PrintConfig.cpp:1590
msgid "Supports remaining times"
msgstr "남은 시간 지원"

#: src/libslic3r/PrintConfig.cpp:1591
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"G 코드에 1 분 간격으로 M73 P [퍼센트 인쇄] R[remaining time in minutes]을 방"
"출하여 펌웨어가 정확한 잔여 시간을 표시 하도록 합니다. 현재만 Prusa i3 MK3 펌"
"웨어는 M73를 인식 하 고 있습니다. 또한 i3 MK3 펌웨어는 자동 모드에서 M73 Qxx "
"Sxx를 지원 합니다."

#: src/libslic3r/PrintConfig.cpp:1599
msgid "Supports stealth mode"
msgstr "자동 모드 지원"

#: src/libslic3r/PrintConfig.cpp:1600
msgid "The firmware supports stealth mode"
msgstr "펌웨어는 스텔스 모드를 지원 합니다"

#: src/libslic3r/PrintConfig.cpp:1605
msgid "How to apply limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1606
msgid "Purpose of Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1608
msgid "How to apply the Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1613
msgid "Emit to G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1614
msgid "Use for time estimate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1615
msgid "Ignore"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1638
msgid "Maximum feedrate X"
msgstr "최대 이송 속도 X"

#: src/libslic3r/PrintConfig.cpp:1639
msgid "Maximum feedrate Y"
msgstr "최대 이송 속도 Y"

#: src/libslic3r/PrintConfig.cpp:1640
msgid "Maximum feedrate Z"
msgstr "최대 이송 속도 Z"

#: src/libslic3r/PrintConfig.cpp:1641
msgid "Maximum feedrate E"
msgstr "최대 이송 속도 E"

#: src/libslic3r/PrintConfig.cpp:1644
msgid "Maximum feedrate of the X axis"
msgstr "X 축의 최대 이송 속도"

#: src/libslic3r/PrintConfig.cpp:1645
msgid "Maximum feedrate of the Y axis"
msgstr "Y 축의 최대 이송 속도"

#: src/libslic3r/PrintConfig.cpp:1646
msgid "Maximum feedrate of the Z axis"
msgstr "Z 축의 최대 이송 속도"

#: src/libslic3r/PrintConfig.cpp:1647
msgid "Maximum feedrate of the E axis"
msgstr "E 축의 최대 이송 속도"

#: src/libslic3r/PrintConfig.cpp:1655
msgid "Maximum acceleration X"
msgstr "최대 가속도 X"

#: src/libslic3r/PrintConfig.cpp:1656
msgid "Maximum acceleration Y"
msgstr "최대 가속도 Y"

#: src/libslic3r/PrintConfig.cpp:1657
msgid "Maximum acceleration Z"
msgstr "최대 가속 Z"

#: src/libslic3r/PrintConfig.cpp:1658
msgid "Maximum acceleration E"
msgstr "최대 가속 E"

#: src/libslic3r/PrintConfig.cpp:1661
msgid "Maximum acceleration of the X axis"
msgstr "X 축의 최대 가속도"

#: src/libslic3r/PrintConfig.cpp:1662
msgid "Maximum acceleration of the Y axis"
msgstr "Y 축의 최대 가속도"

#: src/libslic3r/PrintConfig.cpp:1663
msgid "Maximum acceleration of the Z axis"
msgstr "Z 축의 최대 가속도"

#: src/libslic3r/PrintConfig.cpp:1664
msgid "Maximum acceleration of the E axis"
msgstr "E 축의 최대 가속도"

#: src/libslic3r/PrintConfig.cpp:1672
msgid "Maximum jerk X"
msgstr "최대 저크(jerk) X"

#: src/libslic3r/PrintConfig.cpp:1673
msgid "Maximum jerk Y"
msgstr "최대 저크(jerk) Y"

#: src/libslic3r/PrintConfig.cpp:1674
msgid "Maximum jerk Z"
msgstr "최대 저크(jerk) Z"

#: src/libslic3r/PrintConfig.cpp:1675
msgid "Maximum jerk E"
msgstr "최대 저크(jerk) E"

#: src/libslic3r/PrintConfig.cpp:1678
msgid "Maximum jerk of the X axis"
msgstr "X축 최대 저크(jerk)"

#: src/libslic3r/PrintConfig.cpp:1679
msgid "Maximum jerk of the Y axis"
msgstr "Y축 최대 저크는(jerk)"

#: src/libslic3r/PrintConfig.cpp:1680
msgid "Maximum jerk of the Z axis"
msgstr "Z축 최대 저크(jerk)"

#: src/libslic3r/PrintConfig.cpp:1681
msgid "Maximum jerk of the E axis"
msgstr "E축 최대 저크(jerk)"

#: src/libslic3r/PrintConfig.cpp:1691
msgid "Minimum feedrate when extruding"
msgstr "압출시 최소 공급 속도"

#: src/libslic3r/PrintConfig.cpp:1693
msgid "Minimum feedrate when extruding (M205 S)"
msgstr "압출 시 최소 이송 속도 (M205 S)"

#: src/libslic3r/PrintConfig.cpp:1701
msgid "Minimum travel feedrate"
msgstr "최소 이송 속도"

#: src/libslic3r/PrintConfig.cpp:1703
msgid "Minimum travel feedrate (M205 T)"
msgstr "최소 이동 이송 속도 (M205 T)"

#: src/libslic3r/PrintConfig.cpp:1711
msgid "Maximum acceleration when extruding"
msgstr "압출시 최대 가속도"

#: src/libslic3r/PrintConfig.cpp:1713
msgid ""
"Maximum acceleration when extruding (M204 P)\n"
"\n"
"Marlin (legacy) firmware flavor will use this also as travel acceleration "
"(M204 T)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1724
msgid "Maximum acceleration when retracting"
msgstr "리트렉션 최대 가속도"

#: src/libslic3r/PrintConfig.cpp:1726
msgid "Maximum acceleration when retracting (M204 R)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1734
msgid "Maximum acceleration for travel moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1736
msgid "Maximum acceleration for travel moves (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1743 src/libslic3r/PrintConfig.cpp:1752
msgid "Max"
msgstr "최대"

#: src/libslic3r/PrintConfig.cpp:1744
msgid "This setting represents the maximum speed of your fan."
msgstr "이 설정은 팬의 최대 속도를 나타냅니다."

#: src/libslic3r/PrintConfig.cpp:1753
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"이것은 이 익스트루더의 가장 높은 인쇄 가능 층 높이이며, 가변 층 높이 및 지지"
"층 높이를 캡하는 데 사용됩니다. 합당한 층간 접착력을 얻기 위해 최대 권장 높이"
"는 압출 폭의 75% of 입니다. 0으로 설정하면 층 높이가 노즐 지름의 75% of로 제"
"한됩니다."

#: src/libslic3r/PrintConfig.cpp:1763
msgid "Max print speed"
msgstr "최대 프린트 속도"

#: src/libslic3r/PrintConfig.cpp:1764
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"다른 속도 설정을 0으로 설정할 경우, 지속적인 외부 압력을 유지하기 위해 최적"
"의 속도를 자동 계산한다. 이 실험 설정은 허용할 최대 인쇄 속도를 설정하는 데 "
"사용된다."

#: src/libslic3r/PrintConfig.cpp:1774
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""
"이 실험 설정은 압출기가 지원하는 최대 체적 속도를 설정하기 위해 사용된다."

#: src/libslic3r/PrintConfig.cpp:1783
msgid "Max volumetric slope positive"
msgstr "최대 체적 기울기 양"

#: src/libslic3r/PrintConfig.cpp:1784 src/libslic3r/PrintConfig.cpp:1795
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""
"이 실험 설정은 돌출율의 변화 속도를 제한하는데 사용된다. 1.8mm3/s2 값은 "
"1.8mm3/s(0.45mm 압출 폭, 0.2mm 압출 높이, 공급 속도 20mm/s)에서 5.4mm3/s(공"
"급 속도 60mm/s)로 변경하는 데 최소 2초 이상 걸린다."

#: src/libslic3r/PrintConfig.cpp:1788 src/libslic3r/PrintConfig.cpp:1799
msgid "mm³/s²"
msgstr "mm³/s²"

#: src/libslic3r/PrintConfig.cpp:1794
msgid "Max volumetric slope negative"
msgstr "최대 체적 기울기 음수"

#: src/libslic3r/PrintConfig.cpp:1806 src/libslic3r/PrintConfig.cpp:1815
msgid "Min"
msgstr "최소"

#: src/libslic3r/PrintConfig.cpp:1807
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr "이 설정은 최소 PWM팬이 활동하는데 필요한를 나타냅니다."

#: src/libslic3r/PrintConfig.cpp:1816
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"이것은 이 압출기에 대한 가장 낮은 인쇄 가능한 층 높이이고 가변 층 높이에 대"
"한 분해능을 제한한다. 대표적인 값은 0.05mm와 0.1mm이다."

#: src/libslic3r/PrintConfig.cpp:1824
msgid "Min print speed"
msgstr "최소 인쇄 속도"

#: src/libslic3r/PrintConfig.cpp:1825
msgid "Slic3r will not scale speed down below this speed."
msgstr "Slic3r는 이 속도 이하로 속도를 낮추지 않을 것이다."

#: src/libslic3r/PrintConfig.cpp:1832
msgid "Minimal filament extrusion length"
msgstr "최소 필라멘트 압출 길이"

#: src/libslic3r/PrintConfig.cpp:1833
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"하단 레이어에서 지정된 양의 필라멘트를 사용하는 데 필요한 스커트 루프의 수 이"
"상으로 생성한다. 다중 익스트루더의 경우, 이 최소값은 각 추가기기에 적용된다."

#: src/libslic3r/PrintConfig.cpp:1842
msgid "Configuration notes"
msgstr "구성 노트"

#: src/libslic3r/PrintConfig.cpp:1843
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""
"여기에 개인 노트를 넣을 수 있다. 이 텍스트는 G-code 헤더 코멘트에 추가될 것이"
"다."

#: src/libslic3r/PrintConfig.cpp:1853
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr "이 지름은 익스트루더 노즐의 직경이다(예: 0.5, 0.35 등)."

#: src/libslic3r/PrintConfig.cpp:1858
msgid "Host Type"
msgstr "호스트 유형"

#: src/libslic3r/PrintConfig.cpp:1859
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""
"Slic3r는 프린터 호스트에 G 코드 파일을 업로드할 수 있습니다. 이 필드에는 호스"
"트의 종류가 포함 되어야 합니다."

#: src/libslic3r/PrintConfig.cpp:1881
msgid "Only retract when crossing perimeters"
msgstr "둘레를 횡단 할 때만 수축"

#: src/libslic3r/PrintConfig.cpp:1882
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""
"이동 경로가 상위 레이어의 경계를 초과하지 않는 경우 리트랙션을 비활성화합니"
"다. 따라서 모든 오즈가 보이지 않습니다."

#: src/libslic3r/PrintConfig.cpp:1889
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""
"이 옵션은 누출을 방지하기 위해 비활성 압출기의 온도를 떨어 뜨립니다. 온도를 "
"변경할 때 키가 큰 스커트를 자동으로 사용하고 스커트 외부로 압출기를 이동합니"
"다."

#: src/libslic3r/PrintConfig.cpp:1896
msgid "Output filename format"
msgstr "출력 파일이름 형식"

#: src/libslic3r/PrintConfig.cpp:1897
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""
"모든 구성 옵션을이 템플릿 내의 변수로 사용할 수 있습니다. 예: "
"[layer_height], [fill_density] 등 또한 [타임 스탬프], [연도], [월], [일], [시"
"간], [input_filename], [input_filename_base]을 사용할 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:1906
msgid "Detect bridging perimeters"
msgstr "브릿 징 경계선 감지"

#: src/libslic3r/PrintConfig.cpp:1908
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""
"오버행에 대한 유량을 조정하는 실험 옵션 (브리지 흐름(flow)이 사용됨)에 브릿"
"지 속도를 적용하고 팬을 활성화합니다."

#: src/libslic3r/PrintConfig.cpp:1914
msgid "Filament parking position"
msgstr "필라멘트 멈춤 위치"

#: src/libslic3r/PrintConfig.cpp:1915
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""
"언로딩시 필라멘트 위치에서 압출기 팁의 거리. 이 값은 프린터 펌웨어의 값과 일"
"치해야합니다."

#: src/libslic3r/PrintConfig.cpp:1923
msgid "Extra loading distance"
msgstr "추가 로딩 거리"

#: src/libslic3r/PrintConfig.cpp:1924
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""
"0으로 설정하면로드 중에 필라멘트가 위치에서 이동 한 거리는 언로드 중에 다시 "
"이동 한 거리와 동일합니다. 양수이면 음수가 더 많이 로드되고 로드가 음수 인 경"
"우 언로드보다 짧습니다."

#: src/libslic3r/PrintConfig.cpp:1932 src/libslic3r/PrintConfig.cpp:1949
#: src/libslic3r/PrintConfig.cpp:1963 src/libslic3r/PrintConfig.cpp:1973
msgid "Perimeters"
msgstr "둘레"

#: src/libslic3r/PrintConfig.cpp:1933
msgid ""
"This is the acceleration your printer will use for perimeters. Set zero to "
"disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1940
msgid "Perimeter extruder"
msgstr "가장자리(Perimeter) 익스트루더"

#: src/libslic3r/PrintConfig.cpp:1942
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""
"둘레와 가장자리를 인쇄 할 때 사용할 압출기입니다. 첫 번째 압출기는 1입니다."

#: src/libslic3r/PrintConfig.cpp:1951
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""
"이 값을 0이 아닌 값으로 설정하면 수동 압출 폭을 둘레로 설정할 수 있습니다. 보"
"다 정확한 서페이스를 얻으려면 더 얇은 압출 성형품을 사용하는 것이 좋습니다. 0"
"으로 설정하면 설정된 경우 기본 돌출 폭이 사용되고 그렇지 않으면 1.125 x 노즐 "
"직경이 사용됩니다. 백분율 (예 : 200 %)로 표현하면 레이어 높이를 기준으로 계산"
"됩니다."

#: src/libslic3r/PrintConfig.cpp:1965
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr "둘레의 속도 (등고선, 일명 세로 셸). 자동으로 0으로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:1975
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"이 옵션은 각 레이어에 대해 생성 할 경계 수를 설정합니다. 추가 경계선 옵션을 "
"사용하면 더 큰 주변 수를 사용하는 경사면을 감지 할 때 Slic3r이이 수를 자동으"
"로 증가시킬 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:1979
msgid "(minimum)"
msgstr "(최소)"

#: src/libslic3r/PrintConfig.cpp:1987
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"사용자 정의 스크립트를 통해 출력 G 코드를 처리하려면 여기에 절대 경로를 나열"
"하십시오. 여러 개의 스크립트를 세미콜론으로 구분하십시오. 스크립트는 G 코드 "
"파일의 절대 경로를 첫 번째 인수로 전달되며 환경 변수를 읽음으로써 Slic3r 구"
"성 설정에 액세스 할 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:1999
msgid "Printer type"
msgstr "프린터 타입"

#: src/libslic3r/PrintConfig.cpp:2000
msgid "Type of the printer."
msgstr "프린터 유형."

#: src/libslic3r/PrintConfig.cpp:2005
msgid "Printer notes"
msgstr "프린터 노트"

#: src/libslic3r/PrintConfig.cpp:2006
msgid "You can put your notes regarding the printer here."
msgstr "프린터 관련 메모를 여기에 넣을 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:2014
msgid "Printer vendor"
msgstr "제조 회사"

#: src/libslic3r/PrintConfig.cpp:2015
msgid "Name of the printer vendor."
msgstr "프린터 공급 업체의 이름입니다."

#: src/libslic3r/PrintConfig.cpp:2020
msgid "Printer variant"
msgstr "프린터 변형"

#: src/libslic3r/PrintConfig.cpp:2021
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""
"프린터 변종 이름입니다. 예를 들어, 프린터 변형은 노즐 지름으로 구별 될 수 있"
"습니다."

#: src/libslic3r/PrintConfig.cpp:2038
msgid "Raft contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2040
msgid ""
"The vertical distance between object and raft. Ignored for soluble interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2047
msgid "Raft expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2049
msgid "Expansion of the raft in XY plane for better stability."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2056
msgid "First layer density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2058
msgid "Density of the first raft or support layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2066
msgid "First layer expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2068
msgid ""
"Expansion of the first raft or support layer to improve adhesion to print "
"bed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2075
msgid "Raft layers"
msgstr "라프트(Raft) 레이어"

#: src/libslic3r/PrintConfig.cpp:2077
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""
"개체는 이 개수의 층에 의해 상승되며, 그 아래에서 서포트 재료가 생성될 것이다."

#: src/libslic3r/PrintConfig.cpp:2085
msgid "Slice resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2086
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""
"잘라내기 작업의 속도를 높이고 메모리 사용량을 줄이기 위해 입력 파일을 단순화"
"하는 데 사용되는 최소 세부 해상도. 고해상도 모델은 종종 프린터가 렌더링할 수 "
"있는 것보다 더 많은 디테일을 가지고 있다. 단순화를 사용하지 않고 입력에서 전"
"체 해상도를 사용하려면 0으로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:2096
msgid "G-code resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2097
msgid ""
"Maximum deviation of exported G-code paths from their full resolution "
"counterparts. Very high resolution G-code requires huge amount of RAM to "
"slice and preview, also a 3D printer may stutter not being able to process a "
"high resolution G-code in a timely manner. On the other hand, a low "
"resolution G-code will produce a low poly effect and because the G-code "
"reduction is performed at each layer independently, visible artifacts may be "
"produced."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2108
msgid "Minimum travel after retraction"
msgstr "리트랙션 후 최소 이동 거리"

#: src/libslic3r/PrintConfig.cpp:2109
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr "이동 거리가 이 길이보다 짧으면 리트렉션이 트리거되지 않습니다."

#: src/libslic3r/PrintConfig.cpp:2115
msgid "Retract amount before wipe"
msgstr "닦아 내기 전의 수축량"

#: src/libslic3r/PrintConfig.cpp:2116
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""
"보우 덴 압출기를 사용하면 와이퍼 동작을하기 전에 약간의 빠른 리트랙션 를하는 "
"것이 좋습니다."

#: src/libslic3r/PrintConfig.cpp:2123
msgid "Retract on layer change"
msgstr "레이어 변경 후퇴"

#: src/libslic3r/PrintConfig.cpp:2124
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr "이 플래그는 Z 이동이 완료 될 때마다 취소를 강제 실행합니다."

#: src/libslic3r/PrintConfig.cpp:2129 src/libslic3r/PrintConfig.cpp:2137
msgid "Length"
msgstr "길이"

#: src/libslic3r/PrintConfig.cpp:2130
msgid "Retraction Length"
msgstr "리트랙션 길이"

#: src/libslic3r/PrintConfig.cpp:2131
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"후퇴가 트리거되면 필라멘트가 지정된 양만큼 뒤로 당겨집니다 (길이는 압출기에 "
"들어가기 전에 원시 필라멘트에서 측정됩니다)."

#: src/libslic3r/PrintConfig.cpp:2138
msgid "Retraction Length (Toolchange)"
msgstr "리트랙션 길이 (툴 체인지)"

#: src/libslic3r/PrintConfig.cpp:2139
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"공구를 교체하기 전에 후퇴가 트리거되면 필라멘트가 지정된 양만큼 뒤로 당겨집니"
"다 (길이는 압출기에 들어가기 전에 원시 필라멘트에서 측정됩니다)."

#: src/libslic3r/PrintConfig.cpp:2147
msgid "Lift Z"
msgstr "Z축 올림"

#: src/libslic3r/PrintConfig.cpp:2148
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""
"이 값을 양수 값으로 설정하면 철회가 트리거 될 때마다 Z가 빠르게 올라갑니다. "
"여러 개의 압출기를 사용하는 경우 첫 번째 압출기의 설정 만 고려됩니다."

#: src/libslic3r/PrintConfig.cpp:2155
msgid "Above Z"
msgstr "Z 위"

#: src/libslic3r/PrintConfig.cpp:2156
msgid "Only lift Z above"
msgstr "오직 Z축 위로만"

#: src/libslic3r/PrintConfig.cpp:2157
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"이것을 양의 값으로 설정하면, Z 리프트는 지정된 절대 Z 위로만 발생한다. 첫 번"
"째 층에서 리프트를 건너뛸 수 있도록 이 설정을 조정할 수 있다."

#: src/libslic3r/PrintConfig.cpp:2164
msgid "Below Z"
msgstr "Z 아래"

#: src/libslic3r/PrintConfig.cpp:2165
msgid "Only lift Z below"
msgstr "Z값 아래만"

#: src/libslic3r/PrintConfig.cpp:2166
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"이것을 양수 값으로 설정하면 Z 리프트가 지정된 절대 Z 아래에서만 발생합니다. "
"첫 번째 레이어로 리프트를 제한하기 위해이 설정을 조정할 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:2174 src/libslic3r/PrintConfig.cpp:2182
msgid "Extra length on restart"
msgstr "재시작시 여분의 길이"

#: src/libslic3r/PrintConfig.cpp:2175
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"이동 후 리트렉셔이 보정되면 익스트루더가 추가 양의 필라멘트를 밀어냅니다. 이 "
"설정은 거의 필요하지 않습니다."

#: src/libslic3r/PrintConfig.cpp:2183
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""
"도구를 교환 한 후 리트렉션를 보정하면 익스트루더가 추가 양의 필라멘트를 밀게"
"됩니다."

#: src/libslic3r/PrintConfig.cpp:2190 src/libslic3r/PrintConfig.cpp:2191
msgid "Retraction Speed"
msgstr "리트랙션 속도"

#: src/libslic3r/PrintConfig.cpp:2192
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "리트랙션 속도 (익스트루더 모터에만 적용됨)."

#: src/libslic3r/PrintConfig.cpp:2198 src/libslic3r/PrintConfig.cpp:2199
msgid "Deretraction Speed"
msgstr "감속 속도"

#: src/libslic3r/PrintConfig.cpp:2200
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"리트랙션 후 압출기에 필라멘트를 로드하는 속도 (압출기 모터에만 적용됨). 0으"
"로 방치하면 리트랙션 속도가 사용됩니다."

#: src/libslic3r/PrintConfig.cpp:2207
msgid "Seam position"
msgstr "재봉선 위치"

#: src/libslic3r/PrintConfig.cpp:2209
msgid "Position of perimeters starting points."
msgstr "둘레의 시작점의 위치."

#: src/libslic3r/PrintConfig.cpp:2215
msgid "Random"
msgstr "무작위"

#: src/libslic3r/PrintConfig.cpp:2216
msgid "Nearest"
msgstr "가장 가까운"

#: src/libslic3r/PrintConfig.cpp:2217
msgid "Aligned"
msgstr "정렬"

#: src/libslic3r/PrintConfig.cpp:2225
msgid "Direction"
msgstr "방향"

#: src/libslic3r/PrintConfig.cpp:2227
msgid "Preferred direction of the seam"
msgstr "선호하는 재봉선(seam)의 방향"

#: src/libslic3r/PrintConfig.cpp:2228
msgid "Seam preferred direction"
msgstr "재봉선(Seam) 선호 방향"

#: src/libslic3r/PrintConfig.cpp:2235
msgid "Jitter"
msgstr "지터(Jitter)"

#: src/libslic3r/PrintConfig.cpp:2237
msgid "Seam preferred direction jitter"
msgstr "재봉선 선호 방향 지터(Jitter)"

#: src/libslic3r/PrintConfig.cpp:2238
msgid "Preferred direction of the seam - jitter"
msgstr "재봉선 지터의 선호 방향"

#: src/libslic3r/PrintConfig.cpp:2245
msgid "Distance from brim/object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2246
msgid ""
"Distance between skirt and brim (when draft shield is not used) or objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2252
msgid "Skirt height"
msgstr "스커트(Skirt) 높이"

#: src/libslic3r/PrintConfig.cpp:2253
msgid "Height of skirt expressed in layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2259
msgid "Draft shield"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2260
msgid ""
"With draft shield active, the skirt will be printed skirt_distance from the "
"object, possibly intersecting brim.\n"
"Enabled = skirt is as tall as the highest printed object.\n"
"Limited = skirt is as tall as specified by skirt_height.\n"
"This is useful to protect an ABS or ASA print from warping and detaching "
"from print bed due to wind draft."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2268
msgid "Disabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2269
msgid "Limited"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2270
msgid "Enabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2275
msgid "Loops (minimum)"
msgstr "루프 (최소)"

#: src/libslic3r/PrintConfig.cpp:2276
msgid "Skirt Loops"
msgstr "스커트 루프"

#: src/libslic3r/PrintConfig.cpp:2277
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"스커트의 루프 수입니다. 최소 압출 길이 옵션을 설정한 경우 여기에 구성된 루프 "
"수보다 클 수 있다. 스커트를 완전히 비활성화하려면 이 값을 0으로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:2285
msgid "Slow down if layer print time is below"
msgstr "레이어 인쇄 시간이 다음과 같은 경우 속도를 낮추십시오"

#: src/libslic3r/PrintConfig.cpp:2286
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""
"층 인쇄 시간이 이 시간보다 낮게 추정될 경우, 인쇄 이동 속도는 이 값으로 지속"
"되도록 축소된다."

#: src/libslic3r/PrintConfig.cpp:2295
msgid "Small perimeters"
msgstr "작은 둘레"

#: src/libslic3r/PrintConfig.cpp:2297
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"이 개별 설정은 반경이 6.5mm 미만인 속도 (일반적으로 구멍)에 영향을줍니다. 백"
"분율로 표시되는 경우 (예 : 80 %) 위의 속도 설정에서 계산됩니다. 자동으로 0으"
"로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:2307
msgid "Solid infill threshold area"
msgstr "솔리드 채우기 임계값"

#: src/libslic3r/PrintConfig.cpp:2309
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""
"지정된 한계값보다 작은 영역을 가진 영역에 대해 솔리드 인필을 강제 적용."

#: src/libslic3r/PrintConfig.cpp:2310
msgid "mm²"
msgstr "mm²"

#: src/libslic3r/PrintConfig.cpp:2316
msgid "Solid infill extruder"
msgstr "솔리드 인필 익스트루더"

#: src/libslic3r/PrintConfig.cpp:2318
msgid "The extruder to use when printing solid infill."
msgstr "꽉찬 면을 인쇄할 때 사용하는 익스트루더."

#: src/libslic3r/PrintConfig.cpp:2324
msgid "Solid infill every"
msgstr "솔리드 인필 간격"

#: src/libslic3r/PrintConfig.cpp:2326
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"이 특징은 주어진 개수의 층마다 단단한 층을 넣을수 있게 한다. 비활성화할 수 없"
"음. 당신은 이것을 어떤 값으로도 설정할 수 있다(예: 9999). Slic3r는 노즐 직경"
"과 층 높이에 따라 결합할 최대 가능한 층 수를 자동으로 선택한다."

#: src/libslic3r/PrintConfig.cpp:2338
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""
"이 값을 0이 아닌 값으로 설정하여 솔리드 표면 인필에 대한 수동 압출 폭을 설정"
"하십시오. 0인 경우 기본 압출 너비가 사용되며, 그렇지 않으면 1.125 x 노즐 직경"
"이 사용된다. 백분율(예: 90%)로 표현되는 경우, 계층 높이에 걸쳐 계산된다."

#: src/libslic3r/PrintConfig.cpp:2350
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""
"솔리드 영역(상단/하부/내부 수평 셸) 인쇄 속도 이는 위의 기본 주입 속도에 대"
"한 백분율(예: 80%)로 표시할 수 있다. 자동을 위해 0으로 설정한다."

#: src/libslic3r/PrintConfig.cpp:2362
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "상단 및 하단 표면에 생성할 솔리드 레이어 수입니다."

#: src/libslic3r/PrintConfig.cpp:2368 src/libslic3r/PrintConfig.cpp:2369
msgid "Minimum thickness of a top / bottom shell"
msgstr "상부/하부 쉘의 최소 두께"

#: src/libslic3r/PrintConfig.cpp:2375
msgid "Spiral vase"
msgstr "꽃병 모드(Spiral vase)"

#: src/libslic3r/PrintConfig.cpp:2376
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than one single object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2384
msgid "Temperature variation"
msgstr "온도 변화"

#: src/libslic3r/PrintConfig.cpp:2385
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""
"돌출부가 활성화되지 않은 경우 적용되는 온도 차이. 노즐을 주기적으로 닦는 전"
"체 높이 \"인공\" 스커트가 가능하다."

#: src/libslic3r/PrintConfig.cpp:2395
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""
"이 시작 절차는 배드가 목표 온도에 도달하고 압출기가 방금 가열을 시작한 후 압"
"출기가열가 완료되기 전에 처음에 삽입됩니다. PrusaSlicer사용자 지정 코드에서 "
"M104 또는 M190을 감지하는 경우 이러한 명령이 자동으로 준비되지 않으므로 가열 "
"명령 및 기타 사용자 지정 작업의 순서를 자유롭게 사용자 지정할 수 있습니다. 모"
"든 PrusaSlicer 설정에 자리 표시자 변수를 사용할 수 있으므로 원하는 위치에 "
"\"M109 S[first_layer_temperature]\" 명령을 넣을 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:2410
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""
"이 시작 절차는 프린터가 gcode를 시작한 후(그리고 다중 재질 프린터의 경우 이 "
"필라멘트에 대한 도구 변경 후) 처음에 삽입됩니다. 특정 필라멘트에 대한 설정을 "
"재정의하는 데 사용됩니다. PrusaSlicer가 사용자 지정 코드에서 M104, M109, "
"M140 또는 M190을 감지하면 이러한 명령이 자동으로 준비되지 않으므로 가열 명령 "
"및 기타 사용자 지정 작업의 순서를 자유롭게 사용자 지정할 수 있습니다. 모든 "
"PrusaSlicer 설정에 자리 표시자 변수를 사용할 수 있으므로 원하는 위치에 "
"\"M109 S[first_layer_temperature]\" 명령을 넣을 수 있습니다. 압출기가 여러 "
"개 있는 경우 gcode는 압출기 순서로 처리됩니다."

#: src/libslic3r/PrintConfig.cpp:2426
msgid "Color change G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2427
msgid "This G-code will be used as a code for the color change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2436
msgid "This G-code will be used as a code for the pause print"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2445
msgid "This G-code will be used as a custom code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2453
msgid "Single Extruder Multi Material"
msgstr "싱글 익스트루더 다중메터리얼"

#: src/libslic3r/PrintConfig.cpp:2454
msgid "The printer multiplexes filaments into a single hot end."
msgstr "프린터는 필라멘트를 하나의 핫 엔드에 다중플렉싱합니다."

#: src/libslic3r/PrintConfig.cpp:2459
msgid "Prime all printing extruders"
msgstr "모든 인쇄 압출기 프라임"

#: src/libslic3r/PrintConfig.cpp:2460
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""
"활성화 된 경우, 모든 인쇄 압출기는 인쇄 시작시 프린트 베드의 전면 가장자리에 "
"프라이밍 됩니다."

#: src/libslic3r/PrintConfig.cpp:2465
msgid "No sparse layers (EXPERIMENTAL)"
msgstr "숨겨진 레이어층 없음(실험적)"

#: src/libslic3r/PrintConfig.cpp:2466
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""
"활성화된 경우 도구 변경 없이 레이어에 와이프 타워가 인쇄되지 않습니다. 툴체인"
"지 레이어에서 압출기는 아래쪽으로 이동하여 와이프 타워를 인쇄합니다. 사용자"
"는 인쇄물과 충돌이 없는지 확인합니다."

#: src/libslic3r/PrintConfig.cpp:2473
msgid "Slice gap closing radius"
msgstr "슬라이스 간격 닫힘 반경"

#: src/libslic3r/PrintConfig.cpp:2475
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"삼각형 메쉬 슬라이싱 중에, 2배 간격 폐쇄 반경 보다 작은 균열이 채워집니다. "
"틈 닫기 작업은 최종 인쇄 해상도를 줄일 수 있으므로 값을 합리적으로 낮게 유지 "
"하는 것이 좋습니다."

#: src/libslic3r/PrintConfig.cpp:2483
msgid "Slicing Mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2485
msgid ""
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
"close all holes in the model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2490
msgid "Regular"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2491
msgid "Even-odd"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2492
msgid "Close holes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2497
msgid "Generate support material"
msgstr "서포트 재료 생성"

#: src/libslic3r/PrintConfig.cpp:2499
msgid "Enable support material generation."
msgstr "서포트 재료를 사용합니다."

#: src/libslic3r/PrintConfig.cpp:2503
msgid "Auto generated supports"
msgstr "자동 생성 지원"

#: src/libslic3r/PrintConfig.cpp:2505
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"이 옵션을 선택 하면 오버행 임계값에 따라 서포트가 자동으로 생성 됩니다. 이 확"
"인란을 선택 하지 않으면 \"서포트 지원 영역\" 볼륨 내 에서만 지원이 생성 됩니"
"다."

#: src/libslic3r/PrintConfig.cpp:2511
msgid "XY separation between an object and its support"
msgstr "개체와 그 서포트 사이 XY 분리"

#: src/libslic3r/PrintConfig.cpp:2513
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"객체(object)와 그 서포트 사이의 XY 분리. 백분율 (예 : 50 %)로 표시되는 경우 "
"외부 둘레 너비를 기준으로 계산됩니다."

#: src/libslic3r/PrintConfig.cpp:2524
msgid "Pattern angle"
msgstr "채움 각도"

#: src/libslic3r/PrintConfig.cpp:2526
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr "이 설정을 사용하여지지 평면 패턴을 수평면으로 회전시킵니다."

#: src/libslic3r/PrintConfig.cpp:2536 src/libslic3r/PrintConfig.cpp:3495
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""
"그것이 빌드 플레이트에있는 경우에만 지원을 작성하십시오. 인쇄물에 대한 지원"
"을 작성하지 마십시오."

#: src/libslic3r/PrintConfig.cpp:2542
msgid "Top contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2544
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""
"개체와 서포트 사이의 수직 거리. 이 값을 0으로 설정하면 Slic3r이 첫 번째 객체"
"(object) 레이어에 브리지 흐름과 속도를 사용하지 못하게됩니다."

#: src/libslic3r/PrintConfig.cpp:2552
msgid "0 (soluble)"
msgstr "0 (수용성)"

#: src/libslic3r/PrintConfig.cpp:2553
msgid "0.1 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2554
msgid "0.2 (detachable)"
msgstr "0.2 (분리 가능)"

#: src/libslic3r/PrintConfig.cpp:2560
msgid "Bottom contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2562
msgid ""
"The vertical distance between the object top surface and the support "
"material interface. If set to zero, support_material_contact_distance will "
"be used for both top and bottom contact Z distances."
msgstr ""

#. TRN To be shown in Print Settings "Bottom contact Z distance". Have to be as short as possible
#. TRN To be shown in Print Settings "Bottom interface layers". Have to be as short as possible
#: src/libslic3r/PrintConfig.cpp:2570 src/libslic3r/PrintConfig.cpp:2655
msgid "Same as top"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2577
msgid "Enforce support for the first"
msgstr "첫 번째 서포트 더 강화"

#: src/libslic3r/PrintConfig.cpp:2579
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"일반적인 서포트 소재의 활성화 여부와, 각도 임계 값에 관계없이 하단에서부터 세"
"어 지정된 레이어 수에 대한지지 자료를 생성합니다. 이것은 빌드 플레이트에 매"
"우 얇거나 부족한 풋 프린트를 가진 개체를 더 많이 부착 할 때 유용합니다."

#: src/libslic3r/PrintConfig.cpp:2584
msgid "Enforce support for the first n layers"
msgstr "첫 번째 n 개의 레이어에 대한 서포트 강화"

#: src/libslic3r/PrintConfig.cpp:2590
msgid "Support material/raft/skirt extruder"
msgstr "서포트 재료 / 라프트 / 스커트 익스트루더"

#: src/libslic3r/PrintConfig.cpp:2592
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"서포트 재료, 라프트 및 스커트를 인쇄 할 때 사용하는 압출기 (도구 변경을 최소"
"화하기 위해 현재 압출기를 사용하려면 1+, 0)."

#: src/libslic3r/PrintConfig.cpp:2601
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"서포트 재료의 수동 압출 폭을 설정하려면이 값을 0이 아닌 값으로 설정하십시오. "
"0으로 설정하면 설정된 경우 기본 압출 폭이 사용되고 그렇지 않으면 노즐 지름이 "
"사용됩니다. 백분율 (예 : 90 %)로 표현하면 레이어 높이를 기준으로 계산됩니다."

#: src/libslic3r/PrintConfig.cpp:2611
msgid "Interface loops"
msgstr "접점 루프"

#: src/libslic3r/PrintConfig.cpp:2613
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr "지지대의 상단 접촉 층을 루프로 덮으십시오. 기본적으로 사용 안 함."

#: src/libslic3r/PrintConfig.cpp:2618
msgid "Support material/raft interface extruder"
msgstr "서포트 재료/라프트 접점 익스트루더"

#: src/libslic3r/PrintConfig.cpp:2620
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"서포트 재료 접점를 인쇄 할 때 사용할 익스트루더 (도구 변경을 최소화하기 위해 "
"현재 익스트루더를 사용하려면 1+, 0). 이것은 라프트에도 영향을 미칩니다."

#: src/libslic3r/PrintConfig.cpp:2628
msgid "Top interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2630
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr "객체(object)와 서포트 재료 사이에 삽입할 접점 레이어 수입니다."

#: src/libslic3r/PrintConfig.cpp:2637
msgid "0 (off)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2638
msgid "1 (light)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2639
msgid "2 (default)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2640
msgid "3 (heavy)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2646
msgid "Bottom interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2648
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material. Set to -1 to use support_material_interface_layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2661
msgid "Closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2663
msgid ""
"For snug supports, the support regions will be merged using morphological "
"closing operation. Gaps smaller than the closing radius will be filled in."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2671
msgid "Interface pattern spacing"
msgstr "접점 패턴 간격"

#: src/libslic3r/PrintConfig.cpp:2673
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr "접점 라인 간 간격. 솔리드 접점를 가져오려면 0을 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:2682
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"서포트 재료 접점 레이어 인쇄 속도 백분율(예: 50%)로 표현될 경우 서포트 재료 "
"속도에 따라 계산된다."

#: src/libslic3r/PrintConfig.cpp:2691
msgid "Pattern"
msgstr "패턴"

#: src/libslic3r/PrintConfig.cpp:2693
msgid "Pattern used to generate support material."
msgstr "서포트 재료를 생성하는 데 사용되는 패턴."

#: src/libslic3r/PrintConfig.cpp:2699
msgid "Rectilinear grid"
msgstr "직선 그리드"

#: src/libslic3r/PrintConfig.cpp:2705
msgid "Interface pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2707
msgid ""
"Pattern used to generate support material interface. Default pattern for non-"
"soluble support interface is Rectilinear, while default pattern for soluble "
"support interface is Concentric."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2721
msgid "Pattern spacing"
msgstr "패턴 간격"

#: src/libslic3r/PrintConfig.cpp:2723
msgid "Spacing between support material lines."
msgstr "서포트 재료 라인 사이의 간격."

#: src/libslic3r/PrintConfig.cpp:2732
msgid "Speed for printing support material."
msgstr "서포트 재료를 인쇄하는 속도."

#: src/libslic3r/PrintConfig.cpp:2739
msgid "Style"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2741
msgid ""
"Style and shape of the support towers. Projecting the supports into a "
"regular grid will create more stable supports, while snug support towers "
"will save material and reduce object scarring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2748
msgid "Snug"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2753
msgid "Synchronize with object layers"
msgstr "객체(object) 레이어와 동기화"

#: src/libslic3r/PrintConfig.cpp:2755
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""
"서포트 레이어를 프린트 레이어와 동기화하십시오. 이것은  스위치가 비싼 다중 메"
"터리얼 프린터에서 유용하다."

#: src/libslic3r/PrintConfig.cpp:2761
msgid "Overhang threshold"
msgstr "오버행 한계점"

#: src/libslic3r/PrintConfig.cpp:2763
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"서포트 재료는 경사각(90° = 수직)이 지정된 임계점보다 높은 압출에 대해서는 생"
"성되지 않는다. 즉, 이 값은 서포트 재료 없이 인쇄할 수 있는 가장 수평 경사(수"
"평면에서 측정됨)를 나타낸다. 자동 감지를 위해 0으로 설정하십시오(권장)."

#: src/libslic3r/PrintConfig.cpp:2775
msgid "With sheath around the support"
msgstr "서포트 주변이나 외부로"

#: src/libslic3r/PrintConfig.cpp:2777
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"기본 서포트 주위에 외장 (단일 주변 선)을 추가하십시오. 이것은 페이스 업을보"
"다 신뢰성있게 만들뿐만 아니라 제거하기도 어렵습니다."

#: src/libslic3r/PrintConfig.cpp:2784
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2787
msgid "Nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2793
msgid "Thick bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2795
msgid ""
"If enabled, bridges are more reliable, can bridge longer distances, but may "
"look worse. If disabled, bridges look better but are reliable just for "
"shorter bridged distances."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2801
msgid "Detect thin walls"
msgstr "얇은 벽(walls) 감지"

#: src/libslic3r/PrintConfig.cpp:2803
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr "싱글 너비 벽 (두 부분이 맞지 않는 부분과 무너지는 부분)을 감지합니다."

#: src/libslic3r/PrintConfig.cpp:2809
msgid "Threads"
msgstr "스레드(Threads)"

#: src/libslic3r/PrintConfig.cpp:2810
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""
"스레드는 장기 실행 태스크를 병렬 처리하는 데 사용됩니다. 최적의 스레드 수는 "
"사용 가능한 코어 / 프로세서 수보다 약간 높습니다."

#: src/libslic3r/PrintConfig.cpp:2822
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
"and {next_extruder} can be used. When a tool-changing command which changes "
"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2835
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""
"이 값을 0이 아닌 값으로 설정하여 상단 서피스에 대한 infill의 수동 압출 폭을 "
"설정합니다. 얇은 압출 성형물을 사용하여 모든 좁은 지역을 채우고 더 매끄러운 "
"마무리를 할 수 있습니다. 0으로 설정된 경우 기본 압출 폭이 사용되고 그렇지 않"
"으면 노즐 지름이 사용됩니다. 백분율 (예 : 90 %)로 표현하면 레이어 높이를 기준"
"으로 계산됩니다."

#: src/libslic3r/PrintConfig.cpp:2848
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"상단 솔리드 레이어 인쇄 속도 (솔리드 레이어가 아닌 최상단 외부 레이어에만 적"
"용) 표면을 더 좋게 마무리하려면 속도를 늦추시기 바랍니다. 이것은 위의 고체 충"
"전 속도에 대한 백분율 (예 : 80 %)로 나타낼 수 있습니다. 자동으로 0으로 설정하"
"십시오."

#: src/libslic3r/PrintConfig.cpp:2863
msgid "Number of solid layers to generate on top surfaces."
msgstr "상단 표면에 생성 할 솔리드 레이어 수입니다."

#: src/libslic3r/PrintConfig.cpp:2864
msgid "Top solid layers"
msgstr "탑 솔리드 레이어"

#: src/libslic3r/PrintConfig.cpp:2872
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""
"상단 단층의 수는 상단 쉘의 최소 두께를 충족하기 위해 필요한 경우 "
"top_solid_layers 이상으로 증가한다. 이 기능은 가변 레이어 높이로 인쇄할 때 베"
"개 효과를 방지하는 데 유용합니다."

#: src/libslic3r/PrintConfig.cpp:2875
msgid "Minimum top shell thickness"
msgstr "최소 상단 쉘 두께"

#: src/libslic3r/PrintConfig.cpp:2882
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "이동 속도 (먼 돌출 점 사이의 점프)."

#: src/libslic3r/PrintConfig.cpp:2890
msgid "Z travel"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2891
msgid ""
"Speed for movements along the Z axis.\n"
"When set to zero, the value is ignored and regular travel speed is used "
"instead."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2899
msgid "Use firmware retraction"
msgstr "펌웨어 철회"

#: src/libslic3r/PrintConfig.cpp:2900
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""
"이 실험 설정은 G10 및 G11 명령을 사용하여 펌웨어에서 취소를 처리하도록합니"
"다. 이것은 최근의 말린에서만 지원됩니다."

#: src/libslic3r/PrintConfig.cpp:2906
msgid "Use relative E distances"
msgstr "상대적인 E 거리 사용"

#: src/libslic3r/PrintConfig.cpp:2907
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""
"펌웨어에 상대 E 값이 필요한 경우이 값을 선택하고, 그렇지 않으면 선택하지 마십"
"시오. 대부분의 회사는 절대 값을 사용합니다."

#: src/libslic3r/PrintConfig.cpp:2913
msgid "Use volumetric E"
msgstr "용적(volumetric) E 사용"

#: src/libslic3r/PrintConfig.cpp:2914
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"이 실험 설정은 선형 밀리미터 대신에 입방 밀리미터 단위의 E 값을 출력으로 사용"
"합니다. 펌웨어가 필라멘트 직경을 모르는 경우 볼륨 모드를 켜고 선택한 필라멘트"
"와 연결된 필라멘트 직경을 사용하기 위해 시작 G 코드에 'M200 D "
"[filament_diameter_0] T0'과 같은 명령을 입력 할 수 있습니다 Slic3r. 이것은 최"
"근의 말린에서만 지원됩니다."

#: src/libslic3r/PrintConfig.cpp:2924
msgid "Enable variable layer height feature"
msgstr "가변 레이어 높이 기능 사용"

#: src/libslic3r/PrintConfig.cpp:2925
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""
"일부 프린터 또는 프린터 설정은 가변 레이어 높이로 인쇄하는 데 어려움이있을 "
"수 있습니다. 기본적으로 사용됩니다."

#: src/libslic3r/PrintConfig.cpp:2931
msgid "Wipe while retracting"
msgstr "수축시 닦아내십시오"

#: src/libslic3r/PrintConfig.cpp:2932
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""
"이 플래그는 누출된 리트랙싱의 블럽 가능성을 최소화하기 위해 수축하는 동안 노"
"즐을 이동시킨다."

#: src/libslic3r/PrintConfig.cpp:2939
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"다중 메터리알 프린터는 공구 교환 시 익스트루더를 프라이밍하거나 제거해야 할 "
"수 있다. 과도한 물질을 와이퍼 타워에 돌출시킨다."

#: src/libslic3r/PrintConfig.cpp:2945
msgid "Purging volumes - load/unload volumes"
msgstr "볼륨 삭제 - 볼륨 로드/언로드"

#: src/libslic3r/PrintConfig.cpp:2946
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""
"이 벡터는 지우기 타워에서 사용 되는 각 도구에서/로 변경 하는 데 필요한 볼륨"
"을 저장 합니다. 이러한 값은 아래의 전체 퍼징 볼륨의 생성을 단순화 하는 데 사"
"용 됩니다."

#: src/libslic3r/PrintConfig.cpp:2952
msgid "Purging volumes - matrix"
msgstr "볼륨 삭제 - 행렬"

#: src/libslic3r/PrintConfig.cpp:2953
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""
"이 매트릭스는 지정 된 도구 쌍에 대해 와이퍼 타워의 새필라멘트를 제거 하는 데 "
"필요한 체적 (입방 밀리 미터)을 설명 합니다."

#: src/libslic3r/PrintConfig.cpp:2962
msgid "Position X"
msgstr "X축 위치"

#: src/libslic3r/PrintConfig.cpp:2963
msgid "X coordinate of the left front corner of a wipe tower"
msgstr "와이프 타워의 좌측 전면 모서리의 X 좌표"

#: src/libslic3r/PrintConfig.cpp:2969
msgid "Position Y"
msgstr "Y축 위치"

#: src/libslic3r/PrintConfig.cpp:2970
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr "와이퍼 작동 타워의 좌측 전방 모서리의 Y 좌표"

#: src/libslic3r/PrintConfig.cpp:2977
msgid "Width of a wipe tower"
msgstr "와이퍼 타워 폭"

#: src/libslic3r/PrintConfig.cpp:2983
msgid "Wipe tower rotation angle"
msgstr "와이퍼 타워 회전각도"

#: src/libslic3r/PrintConfig.cpp:2984
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr "X 축에 대해 타워 회전 각도를 닦습니다."

#: src/libslic3r/PrintConfig.cpp:2990 src/libslic3r/PrintConfig.cpp:2991
msgid "Wipe tower brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2999
msgid "Wipe into this object's infill"
msgstr "이 객체(object)의 채우기로 지우기"

#: src/libslic3r/PrintConfig.cpp:3000
msgid ""
"Purging after toolchange will be done inside this object's infills. This "
"lowers the amount of waste but may result in longer print time  due to "
"additional travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3007
msgid "Wipe into this object"
msgstr "이 객체(object)로 지우기"

#: src/libslic3r/PrintConfig.cpp:3008
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"객체(object)는 도구 변경 후 노즐을 소거 하는 데 사용 되며, 그렇지 않으면 와이"
"프 타워에서 종료 되는 재료를 저장 하고 인쇄 시간을 줄입니다. 그 결과 객체"
"(object)의 색상이 혼합 됩니다."

#: src/libslic3r/PrintConfig.cpp:3014
msgid "Maximal bridging distance"
msgstr "최대 브리징 거리"

#: src/libslic3r/PrintConfig.cpp:3015
msgid "Maximal distance between supports on sparse infill sections."
msgstr "드문드문한 인필 섹션에서 지지대 사이의 최대 거리."

#: src/libslic3r/PrintConfig.cpp:3021
msgid "XY Size Compensation"
msgstr "XY 수평 확장"

#: src/libslic3r/PrintConfig.cpp:3023
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""
"XY 평면에서 설정된 값(음수 = 안, 양 = 바깥쪽)에 따라 객체(object)가 증가/정격"
"된다. 이는 구멍 크기를 미세 조정하는데 유용할 수 있다."

#: src/libslic3r/PrintConfig.cpp:3031
msgid "Z offset"
msgstr "Z 오프셋"

#: src/libslic3r/PrintConfig.cpp:3032
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"이 값은 출력 G-code의 모든 Z 좌표에서 추가(또는 감산)된다. 예를 들어, 엔드 스"
"톱 0이 실제로 노즐을 프린트 베드에서 0.3mm 떨어진 곳에 둔 경우, 이를 -0.3(또"
"는 엔드 스톱을 고정)으로 설정하십시오."

#: src/libslic3r/PrintConfig.cpp:3099
msgid "Display width"
msgstr "디스플레이 너비"

#: src/libslic3r/PrintConfig.cpp:3100
msgid "Width of the display"
msgstr "디스플레이의 폭입니다"

#: src/libslic3r/PrintConfig.cpp:3105
msgid "Display height"
msgstr "표시 높이"

#: src/libslic3r/PrintConfig.cpp:3106
msgid "Height of the display"
msgstr "디스플레이의 높이"

#: src/libslic3r/PrintConfig.cpp:3111
msgid "Number of pixels in"
msgstr "의 픽셀 수"

#: src/libslic3r/PrintConfig.cpp:3113
msgid "Number of pixels in X"
msgstr "X의 픽셀 수"

#: src/libslic3r/PrintConfig.cpp:3119
msgid "Number of pixels in Y"
msgstr "Y의 픽셀 수"

#: src/libslic3r/PrintConfig.cpp:3124
msgid "Display horizontal mirroring"
msgstr "수평 미러링 표시"

#: src/libslic3r/PrintConfig.cpp:3125
msgid "Mirror horizontally"
msgstr "수평으로 미러"

#: src/libslic3r/PrintConfig.cpp:3126
msgid "Enable horizontal mirroring of output images"
msgstr "출력 이미지의 수평 미러링 사용"

#: src/libslic3r/PrintConfig.cpp:3131
msgid "Display vertical mirroring"
msgstr "수직 미러링 표시"

#: src/libslic3r/PrintConfig.cpp:3132
msgid "Mirror vertically"
msgstr "수직으로 미러"

#: src/libslic3r/PrintConfig.cpp:3133
msgid "Enable vertical mirroring of output images"
msgstr "출력 이미지의 수직 미러링 사용"

#: src/libslic3r/PrintConfig.cpp:3138
msgid "Display orientation"
msgstr "디스플레이 방향"

#: src/libslic3r/PrintConfig.cpp:3139
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"SLA 프린터 내에서 실제 LCD 디스플레이 방향을 설정 합니다. 세로 모드는 디스플"
"레이 너비 및 높이 매개 변수의 의미를 반전 하 고 출력 이미지는 90도 회전 합니"
"다."

#: src/libslic3r/PrintConfig.cpp:3145
msgid "Landscape"
msgstr "가로"

#: src/libslic3r/PrintConfig.cpp:3146
msgid "Portrait"
msgstr "세로모드"

#: src/libslic3r/PrintConfig.cpp:3151 src/libslic3r/PrintConfig.cpp:3776
msgid "Fast"
msgstr "빠른"

#: src/libslic3r/PrintConfig.cpp:3152
msgid "Fast tilt"
msgstr "빠른 기울기"

#: src/libslic3r/PrintConfig.cpp:3153
msgid "Time of the fast tilt"
msgstr "기울이기 시간"

#: src/libslic3r/PrintConfig.cpp:3160 src/libslic3r/PrintConfig.cpp:3775
msgid "Slow"
msgstr "느리게"

#: src/libslic3r/PrintConfig.cpp:3161
msgid "Slow tilt"
msgstr "천천히 기울이기"

#: src/libslic3r/PrintConfig.cpp:3162
msgid "Time of the slow tilt"
msgstr "천천히 기울이는 속도"

#: src/libslic3r/PrintConfig.cpp:3169
msgid "Area fill"
msgstr "영역 채우기"

#: src/libslic3r/PrintConfig.cpp:3170
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""
"배드 영역의 비율입니다. \n"
"인쇄 영역이 지정 된 값을 초과 하면 \n"
"그런 다음 느린 기울기가 사용 됩니다, 그렇지 않으면-빠른 기울기가 됩니다"

#: src/libslic3r/PrintConfig.cpp:3177 src/libslic3r/PrintConfig.cpp:3178
#: src/libslic3r/PrintConfig.cpp:3179
msgid "Printer scaling correction"
msgstr "프린터 스케일링 보정"

#: src/libslic3r/PrintConfig.cpp:3185 src/libslic3r/PrintConfig.cpp:3187
msgid "Printer scaling correction in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3186
msgid "Printer scaling X axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3193 src/libslic3r/PrintConfig.cpp:3195
msgid "Printer scaling correction in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3194
msgid "Printer scaling Y axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3201 src/libslic3r/PrintConfig.cpp:3203
msgid "Printer scaling correction in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3202
msgid "Printer scaling Z axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3209 src/libslic3r/PrintConfig.cpp:3210
msgid "Printer absolute correction"
msgstr "프린터 절대 보정"

#: src/libslic3r/PrintConfig.cpp:3211
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr "교정 기호에 따라 슬라이스된 2D 폴리곤을 팽창 하거나 수축 합니다."

#: src/libslic3r/PrintConfig.cpp:3217
msgid "Elephant foot minimum width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3219
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3226 src/libslic3r/PrintConfig.cpp:3227
msgid "Printer gamma correction"
msgstr "프린터 감마 보정"

#: src/libslic3r/PrintConfig.cpp:3228
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""
"이렇게 하면 래스터화된 2D 다각형에 감마 보정이 적용 됩니다. 감마 값이 0 이면 "
"중간에 임계값이 임계화 의미입니다. 이 동작은 폴리곤의 구멍을 잃지 않고 안티알"
"리아싱을 제거 합니다."

#: src/libslic3r/PrintConfig.cpp:3247 src/libslic3r/PrintConfig.cpp:3248
msgid "SLA material type"
msgstr "SLA 재질 유형"

#: src/libslic3r/PrintConfig.cpp:3259 src/libslic3r/PrintConfig.cpp:3260
msgid "Initial layer height"
msgstr "초기 레이어 높이"

#: src/libslic3r/PrintConfig.cpp:3266 src/libslic3r/PrintConfig.cpp:3267
msgid "Bottle volume"
msgstr "병 볼륨"

#: src/libslic3r/PrintConfig.cpp:3268
msgid "ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3273 src/libslic3r/PrintConfig.cpp:3274
msgid "Bottle weight"
msgstr "병 무게"

#: src/libslic3r/PrintConfig.cpp:3275
msgid "kg"
msgstr "kg"

#: src/libslic3r/PrintConfig.cpp:3282
msgid "g/ml"
msgstr "g /ml"

#: src/libslic3r/PrintConfig.cpp:3289
msgid "money/bottle"
msgstr "가격 /병"

#: src/libslic3r/PrintConfig.cpp:3294
msgid "Faded layers"
msgstr "페이드 레이어"

#: src/libslic3r/PrintConfig.cpp:3295
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr "노출 시간에 필요한 레이어 수는 초기 노출 시간에서 노출 시간으로 페이드"

#: src/libslic3r/PrintConfig.cpp:3302 src/libslic3r/PrintConfig.cpp:3303
msgid "Minimum exposure time"
msgstr "최소 노출 시간"

#: src/libslic3r/PrintConfig.cpp:3310 src/libslic3r/PrintConfig.cpp:3311
msgid "Maximum exposure time"
msgstr "최대 노출 시간"

#: src/libslic3r/PrintConfig.cpp:3318 src/libslic3r/PrintConfig.cpp:3319
msgid "Exposure time"
msgstr "노출 시간"

#: src/libslic3r/PrintConfig.cpp:3325 src/libslic3r/PrintConfig.cpp:3326
msgid "Minimum initial exposure time"
msgstr "최소 초기 노출 시간"

#: src/libslic3r/PrintConfig.cpp:3333 src/libslic3r/PrintConfig.cpp:3334
msgid "Maximum initial exposure time"
msgstr "최대 초기 노출 시간"

#: src/libslic3r/PrintConfig.cpp:3341 src/libslic3r/PrintConfig.cpp:3342
msgid "Initial exposure time"
msgstr "초기 노출 시간"

#: src/libslic3r/PrintConfig.cpp:3348 src/libslic3r/PrintConfig.cpp:3349
msgid "Correction for expansion"
msgstr "확장 보정"

#: src/libslic3r/PrintConfig.cpp:3355 src/libslic3r/PrintConfig.cpp:3356
msgid "Correction for expansion in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3362 src/libslic3r/PrintConfig.cpp:3363
msgid "Correction for expansion in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3369 src/libslic3r/PrintConfig.cpp:3370
msgid "Correction for expansion in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3376
msgid "SLA print material notes"
msgstr "SLA 인쇄 재료 참고 사항"

#: src/libslic3r/PrintConfig.cpp:3377
msgid "You can put your notes regarding the SLA print material here."
msgstr "여기에서 SLA 인쇄 자료에 대한 메모를 넣을 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:3389 src/libslic3r/PrintConfig.cpp:3400
msgid "Default SLA material profile"
msgstr "기본 SLA 재질 프로 파일"

#: src/libslic3r/PrintConfig.cpp:3411
msgid "Generate supports"
msgstr "지원 생성"

#: src/libslic3r/PrintConfig.cpp:3413
msgid "Generate supports for the models"
msgstr "모델에 대한 지원 생성"

#: src/libslic3r/PrintConfig.cpp:3418
msgid "Pinhead front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3420
msgid "Diameter of the pointing side of the head"
msgstr "헤드 포인팅 측면 지름"

#: src/libslic3r/PrintConfig.cpp:3427
msgid "Head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3429
msgid "How much the pinhead has to penetrate the model surface"
msgstr "핀 헤드가 모델 표면에 침투 하는 정도"

#: src/libslic3r/PrintConfig.cpp:3436
msgid "Pinhead width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3438
msgid "Width from the back sphere center to the front sphere center"
msgstr "뒤쪽 구 중재봉선에서 앞쪽 구 중재봉선 까지의 폭입니다"

#: src/libslic3r/PrintConfig.cpp:3446
msgid "Pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3448
msgid "Diameter in mm of the support pillars"
msgstr "서포트 기둥의 지름 (mm)"

#: src/libslic3r/PrintConfig.cpp:3456
msgid "Small pillar diameter percent"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3458
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3467
msgid "Max bridges on a pillar"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3469
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3477
msgid "Pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3478
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""
"인접한 두 기둥 사이의 교량 유형을 제어 합니다. 두 기둥의 거리에 따라 자동으"
"로 처음 두 사이를 전환 하는 지그재그, 크로스 (지그재그 더블 지그재그) 또는 동"
"적 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:3486
msgid "Zig-Zag"
msgstr "지그재그"

#: src/libslic3r/PrintConfig.cpp:3487
msgid "Cross"
msgstr "크로스"

#: src/libslic3r/PrintConfig.cpp:3488
msgid "Dynamic"
msgstr "동적"

#: src/libslic3r/PrintConfig.cpp:3500
msgid "Pillar widening factor"
msgstr "기둥 확장 계수"

#: src/libslic3r/PrintConfig.cpp:3502
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""
"브릿지 또는 기둥을 다른 기둥에 병합 하면 반지름을 늘릴 수 있습니다. 0은 증가 "
"없음을 의미 하나는 전체 증가를 의미 합니다."

#: src/libslic3r/PrintConfig.cpp:3511
msgid "Support base diameter"
msgstr "서포트 베이스 지름"

#: src/libslic3r/PrintConfig.cpp:3513
msgid "Diameter in mm of the pillar base"
msgstr "기둥 베이스의 mm 직경"

#: src/libslic3r/PrintConfig.cpp:3521
msgid "Support base height"
msgstr "서포트 기준 높이"

#: src/libslic3r/PrintConfig.cpp:3523
msgid "The height of the pillar base cone"
msgstr "서포트 베이스 원추의 높이"

#: src/libslic3r/PrintConfig.cpp:3530
msgid "Support base safety distance"
msgstr "지지기본 안전 거리"

#: src/libslic3r/PrintConfig.cpp:3533
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""
"모델에서 기둥 베이스의 최소 거리(mm.mm.)는 이 매개변수에 따른 간격이 모델과 "
"패드 사이에 삽입되는 제로 고도 모드에서 의미가 있습니다."

#: src/libslic3r/PrintConfig.cpp:3543
msgid "Critical angle"
msgstr "임계 각도"

#: src/libslic3r/PrintConfig.cpp:3545
msgid "The default angle for connecting support sticks and junctions."
msgstr "서포트 스틱과 접합부를 연결 하는 기본 각도입니다."

#: src/libslic3r/PrintConfig.cpp:3553
msgid "Max bridge length"
msgstr "최대 브리지 길이"

#: src/libslic3r/PrintConfig.cpp:3555
msgid "The max length of a bridge"
msgstr "브릿지의 최대 길이"

#: src/libslic3r/PrintConfig.cpp:3562
msgid "Max pillar linking distance"
msgstr "최대 기둥 연결 거리"

#: src/libslic3r/PrintConfig.cpp:3564
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""
"서로 연결 되는 두기둥의 최대 거리. 0 값은 기둥을 계단식으로 금지 합니다."

#: src/libslic3r/PrintConfig.cpp:3574
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""
"지원 대상을 들어 올려야 하는 양입니다. \"개체 주위 패드\"를 사용하도록 설정하"
"면 이 값은 무시됩니다."

#: src/libslic3r/PrintConfig.cpp:3585
msgid "This is a relative measure of support points density."
msgstr "이는 서포트 점 밀도의 상대적인 척도입니다."

#: src/libslic3r/PrintConfig.cpp:3591
msgid "Minimal distance of the support points"
msgstr "서포트 지점의 최소 거리"

#: src/libslic3r/PrintConfig.cpp:3593
msgid "No support points will be placed closer than this threshold."
msgstr "서포트 지점은 이 임계값 보다 더 가깝게 배치 되지 않습니다."

#: src/libslic3r/PrintConfig.cpp:3599
msgid "Use pad"
msgstr "패드 사용"

#: src/libslic3r/PrintConfig.cpp:3601
msgid "Add a pad underneath the supported model"
msgstr "서포트 되는 모델 아래에 패드 추가"

#: src/libslic3r/PrintConfig.cpp:3606
msgid "Pad wall thickness"
msgstr "패드 벽 두께"

#: src/libslic3r/PrintConfig.cpp:3608
msgid "The thickness of the pad and its optional cavity walls."
msgstr "패드의 두께와 옵션 캐비티 벽."

#: src/libslic3r/PrintConfig.cpp:3616
msgid "Pad wall height"
msgstr "패드 벽 높이"

#: src/libslic3r/PrintConfig.cpp:3617
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""
"패드 캐비티 깊이를 정의 합니다. 캐비티를 비활성화 하려면 0으로 설정 합니다. "
"이 기능을 활성화 할 때 주의 해야할, 일부 수 캐비티 내부 극단적인 흡입 효과를 "
"생성 할 수도 있기 때문에, vat 호일 인쇄를 벗겨 어렵게 만든다."

#: src/libslic3r/PrintConfig.cpp:3630
msgid "Pad brim size"
msgstr "패드 브럼 사이즈"

#: src/libslic3r/PrintConfig.cpp:3631
msgid "How far should the pad extend around the contained geometry"
msgstr "패드가 포함된 형상 주위로 얼마나 확장되어야 하는지"

#: src/libslic3r/PrintConfig.cpp:3641
msgid "Max merge distance"
msgstr "최대 병합 거리"

#: src/libslic3r/PrintConfig.cpp:3643
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"일부 객체(object)는 큰 하나 대신 몇 가지 작은 패드와 함께 얻을 수 있습니다. "
"이 매개 변수는 두 개의 작은 패드의 중재봉선이 얼마나 되어야 하는지 정의 합니"
"다. 그들은 하나의 패드에 병합을 얻을 것이다."

#: src/libslic3r/PrintConfig.cpp:3663
msgid "Pad wall slope"
msgstr "패드 벽 경사"

#: src/libslic3r/PrintConfig.cpp:3665
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""
"배드 평면을 기준으로 하는 패드 벽의 기울기입니다. 90도는 직선 벽을 의미 합니"
"다."

#: src/libslic3r/PrintConfig.cpp:3676
msgid "Create pad around object and ignore the support elevation"
msgstr "오브젝트 주위에 패드를 작성하고 지지 고도를 무시합니다."

#: src/libslic3r/PrintConfig.cpp:3681
msgid "Pad around object everywhere"
msgstr "어디서나 개체 주위에 패드"

#: src/libslic3r/PrintConfig.cpp:3683
msgid "Force pad around object everywhere"
msgstr "사방 오브젝트 주위의 포스 패드"

#: src/libslic3r/PrintConfig.cpp:3688
msgid "Pad object gap"
msgstr "패드 객체(object) 갭"

#: src/libslic3r/PrintConfig.cpp:3690
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr "0 고도 모드에서 객체(object) 바닥과 생성된 패드 사이의 간격입니다."

#: src/libslic3r/PrintConfig.cpp:3699
msgid "Pad object connector stride"
msgstr "패드 객체(object) 커넥터 보폭"

#: src/libslic3r/PrintConfig.cpp:3701
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr "오브젝트와 생성된 패드를 연결하는 두 커넥터 스틱 사이의 거리입니다."

#: src/libslic3r/PrintConfig.cpp:3708
msgid "Pad object connector width"
msgstr "패드 객체(object) 커넥터 너비"

#: src/libslic3r/PrintConfig.cpp:3710
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr "개체와 생성된 패드를 연결하는 커넥터 스틱의 너비입니다."

#: src/libslic3r/PrintConfig.cpp:3717
msgid "Pad object connector penetration"
msgstr "패드 객체(object) 커넥터 침투"

#: src/libslic3r/PrintConfig.cpp:3720
msgid "How much should the tiny connectors penetrate into the model body."
msgstr "작은 커넥터가 모델 본체에 얼마나 침투해야 하는가?"

#: src/libslic3r/PrintConfig.cpp:3727
msgid "Enable hollowing"
msgstr "속빈 공동 사용"

#: src/libslic3r/PrintConfig.cpp:3729
msgid "Hollow out a model to have an empty interior"
msgstr "빈 내부를 가지고 모델을 비우기"

#: src/libslic3r/PrintConfig.cpp:3734
msgid "Wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3736
msgid "Minimum wall thickness of a hollowed model."
msgstr "속이 빈 모델의 최소 벽 두께입니다."

#: src/libslic3r/PrintConfig.cpp:3744
msgid "Accuracy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3746
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""
"성능 계산의 정확성. 값이 낮을수록 원치 않는 아티팩트가 생성될 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:3756
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3768
msgid "Print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3770
msgid ""
"A slower printing profile might be necessary when using materials with "
"higher viscosity or with some hollowed parts. It slows down the tilt "
"movement and adds a delay before exposure."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4232
msgid "Export OBJ"
msgstr "OBJ 내보내기"

#: src/libslic3r/PrintConfig.cpp:4233
msgid "Export the model(s) as OBJ."
msgstr "모델을 OBJ로 내보냅니다."

#: src/libslic3r/PrintConfig.cpp:4244
msgid "Export SLA"
msgstr "STL로 내보내기"

#: src/libslic3r/PrintConfig.cpp:4245
msgid "Slice the model and export SLA printing layers as PNG."
msgstr "모델을 분할하고 SLA 인쇄 레이어를 PNG로 내보냅니다."

#: src/libslic3r/PrintConfig.cpp:4250
msgid "Export 3MF"
msgstr "3MF 내보내기"

#: src/libslic3r/PrintConfig.cpp:4251
msgid "Export the model(s) as 3MF."
msgstr "모델을 3MF로 내보냅니다."

#: src/libslic3r/PrintConfig.cpp:4255
msgid "Export AMF"
msgstr "AMF 내보내기"

#: src/libslic3r/PrintConfig.cpp:4256
msgid "Export the model(s) as AMF."
msgstr "모델을 AMF로 내보냅니다."

#: src/libslic3r/PrintConfig.cpp:4260
msgid "Export STL"
msgstr "STL 내보내기"

#: src/libslic3r/PrintConfig.cpp:4261
msgid "Export the model(s) as STL."
msgstr "모델을 STL로 내보냅니다."

#: src/libslic3r/PrintConfig.cpp:4266
msgid "Slice the model and export toolpaths as G-code."
msgstr "모델을 슬라이스하고 공구 경로를 G 코드로 내보냅니다."

#: src/libslic3r/PrintConfig.cpp:4271
msgid "G-code viewer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4272
msgid "Visualize an already sliced and saved G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4277
msgid "Slice"
msgstr "슬라이스"

#: src/libslic3r/PrintConfig.cpp:4278
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""
" printer_technology 구성 값을 기반으로 모델을 FFF 또는 SLA로 슬라이스합니다."

#: src/libslic3r/PrintConfig.cpp:4283
msgid "Help"
msgstr "도움말"

#: src/libslic3r/PrintConfig.cpp:4284
msgid "Show this help."
msgstr "이 도움말을 표시 합니다."

#: src/libslic3r/PrintConfig.cpp:4289
msgid "Help (FFF options)"
msgstr "도움말 (FFF 옵션)"

#: src/libslic3r/PrintConfig.cpp:4290
msgid "Show the full list of print/G-code configuration options."
msgstr "인쇄/G 코드 구성 옵션의 전체 목록을 표시 합니다."

#: src/libslic3r/PrintConfig.cpp:4294
msgid "Help (SLA options)"
msgstr "도움말 (SLA 옵션)"

#: src/libslic3r/PrintConfig.cpp:4295
msgid "Show the full list of SLA print configuration options."
msgstr "SLA 인쇄 구성 옵션의 전체 목록을 표시 합니다."

#: src/libslic3r/PrintConfig.cpp:4299
msgid "Output Model Info"
msgstr "출력 모델 정보"

#: src/libslic3r/PrintConfig.cpp:4300
msgid "Write information about the model to the console."
msgstr "모델에 대한 정보를 콘솔에 씁니다."

#: src/libslic3r/PrintConfig.cpp:4304
msgid "Save config file"
msgstr "구성 파일 저장"

#: src/libslic3r/PrintConfig.cpp:4305
msgid "Save configuration to the specified file."
msgstr "지정 된 파일에 구성을 저장 합니다."

#: src/libslic3r/PrintConfig.cpp:4315
msgid "Align XY"
msgstr "XY 정렬"

#: src/libslic3r/PrintConfig.cpp:4316
msgid "Align the model to the given point."
msgstr "모델을 지정된 점에 맞춥니다."

#: src/libslic3r/PrintConfig.cpp:4321
msgid "Cut model at the given Z."
msgstr "지정된 Z에서 모델을 잘라냅니다."

#: src/libslic3r/PrintConfig.cpp:4342
msgid "Center"
msgstr "중앙"

#: src/libslic3r/PrintConfig.cpp:4343
msgid "Center the print around the given center."
msgstr "지정된 점을 중재봉선으로 인쇄 합니다."

#: src/libslic3r/PrintConfig.cpp:4347
msgid "Don't arrange"
msgstr "준비하지 마십시오"

#: src/libslic3r/PrintConfig.cpp:4348
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""
"병합하기 전에 지정된 모델을 재정렬하고 원래 XY 좌표를 유지하지 마십시오."

#: src/libslic3r/PrintConfig.cpp:4351
msgid "Ensure on bed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4352
msgid ""
"Lift the object above the bed when it is partially below. Enabled by "
"default, use --no-ensure-on-bed to disable."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4356
msgid "Duplicate"
msgstr "복사"

#: src/libslic3r/PrintConfig.cpp:4357
msgid "Multiply copies by this factor."
msgstr "이 계수로 복사본을 곱합니다."

#: src/libslic3r/PrintConfig.cpp:4361
msgid "Duplicate by grid"
msgstr "모눈에 따라 복제"

#: src/libslic3r/PrintConfig.cpp:4362
msgid "Multiply copies by creating a grid."
msgstr "그리드를 만들어 복사본을 곱합니다."

#: src/libslic3r/PrintConfig.cpp:4366
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""
"한 번 작업을 수행하기 위해 제공 된 모델을 정렬하고 단일 모델로 병합 합니다."

#: src/libslic3r/PrintConfig.cpp:4371
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""
"메쉬를 복구 하십시오 (요청 된 작업을 수행 하기 위해 모델을 슬라이스 해야 할때"
"마다 이 옵션이 암시적으로 추가 됨)."

#: src/libslic3r/PrintConfig.cpp:4375
msgid "Rotation angle around the Z axis in degrees."
msgstr "Z 축 주위 회전 각도입니다."

#: src/libslic3r/PrintConfig.cpp:4379
msgid "Rotate around X"
msgstr "X 주위 회전"

#: src/libslic3r/PrintConfig.cpp:4380
msgid "Rotation angle around the X axis in degrees."
msgstr "X 축을 중재봉선 회전 각도 입니다."

#: src/libslic3r/PrintConfig.cpp:4384
msgid "Rotate around Y"
msgstr "Y 주위로 회전"

#: src/libslic3r/PrintConfig.cpp:4385
msgid "Rotation angle around the Y axis in degrees."
msgstr "Y 축을 중재봉선 회전 각도 입니다."

#: src/libslic3r/PrintConfig.cpp:4390
msgid "Scaling factor or percentage."
msgstr "배율 인수 또는 백분율입니다."

#: src/libslic3r/PrintConfig.cpp:4395
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""
"지정 된 모델에서 연결 되지 않은 부품(Part)을 감지 하여 별도의 객체(object)로 "
"분할 합니다."

#: src/libslic3r/PrintConfig.cpp:4398
msgid "Scale to Fit"
msgstr "크기에 맞게 조정"

#: src/libslic3r/PrintConfig.cpp:4399
msgid "Scale to fit the given volume."
msgstr "지정 된 볼륨에 맞게 크기를 조정 합니다."

#: src/libslic3r/PrintConfig.cpp:4408
msgid "Ignore non-existent config files"
msgstr "존재 하지 않는 구성 파일 무시"

#: src/libslic3r/PrintConfig.cpp:4409
msgid "Do not fail if a file supplied to --load does not exist."
msgstr "로드에 제공 된 파일이 없는 경우 실패 하지 않습니다."

#: src/libslic3r/PrintConfig.cpp:4412
msgid ""
"Forward-compatibility rule when loading configurations from config files and "
"project files (3MF, AMF)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4413
msgid ""
"This version of PrusaSlicer may not understand configurations produced by "
"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
"the list of supported firmware flavors. One may decide to bail out or to "
"substitute an unknown value with a default silently or verbosely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4420
msgid "Bail out on unknown configuration values"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4421
msgid ""
"Enable reading unknown configuration values by verbosely substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4422
msgid ""
"Enable reading unknown configuration values by silently substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4426
msgid "Load config file"
msgstr "구성 파일 로드"

#: src/libslic3r/PrintConfig.cpp:4427
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""
"지정 된 파일에서 구성을 로드 합니다. 여러 파일에서 옵션을 로드 하는 데 두 번 "
"이상 사용할 수 있습니다."

#: src/libslic3r/PrintConfig.cpp:4430
msgid "Output File"
msgstr "출력파일"

#: src/libslic3r/PrintConfig.cpp:4431
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""
"출력이 기록 되는 파일 (지정 하지 않은 경우 입력 파일을 기반으로 합니다)."

#: src/libslic3r/PrintConfig.cpp:4435
msgid "Single instance mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4436
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4447
msgid "Data directory"
msgstr "데이터 디렉터리"

#: src/libslic3r/PrintConfig.cpp:4448
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"지정 된 디렉터리에 설정을 로드 하 고 저장 합니다. 이 기능은 다른 프로 파일을 "
"유지 관리 하거나 네트워크 스토리지의 구성을 포함 하는 데 유용 합니다."

#: src/libslic3r/PrintConfig.cpp:4451
msgid "Logging level"
msgstr "로깅 수준"

#: src/libslic3r/PrintConfig.cpp:4452
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""
"로깅 민감도를 설정합니다. 0:치명적, 1:오류, 2:경고, 3:info, 4:디버그, 5:"
"trace\n"
"예를 들어. loglevel=2 치명적인, 오류 및 경고 수준 메시지를 기록합니다."

#: src/libslic3r/PrintConfig.cpp:4458
msgid "Render with a software renderer"
msgstr "소프트웨어 렌더러를 사용 하 여 렌더링"

#: src/libslic3r/PrintConfig.cpp:4459
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""
"소프트웨어 렌더러를 사용 하여 렌더링 합니다. 번들 메사 소프트웨어 렌더러는 기"
"본 OpenGL 드라이버 대신 로드 됩니다."

#: src/libslic3r/Zipper.cpp:27
msgid "Error with zip archive"
msgstr "zip 아카이브와 오류가 발생 했습니다"

#: src/libslic3r/PrintObject.cpp:125
msgid "Generating perimeters"
msgstr "둘레 생성"

#: src/libslic3r/PrintObject.cpp:228
msgid "Preparing infill"
msgstr "채우기 준비"

#: src/libslic3r/PrintObject.cpp:401
msgid "Generating support material"
msgstr "지원할 서포트 생성"

#~ msgid "Flash printer &firmware"
#~ msgstr "프린터 펌웨어 플래시"

#~ msgid "Import Config from &project"
#~ msgstr "프로젝트에서 설정 가져오기"

#~ msgid "Export plate as &STL"
#~ msgstr "STL로 내보내기"

#~ msgid "Export plate as STL &including supports"
#~ msgstr "서포트를 포함하여 플레이터를 STL로 내보내기"

#~ msgid "Export &toolpaths as OBJ"
#~ msgstr "OBJ로 내보내기 및 공구 경로"

#~ msgid "&Select all"
#~ msgstr "&모두 선택 "

#~ msgid "D&eselect all"
#~ msgstr "모든 선택 취소 D&select"

#~ msgid "&Delete selected"
#~ msgstr "&선택 삭제 "

#~ msgid "Delete &all"
#~ msgstr "전부 지움 "

#~ msgid "Re&load from disk"
#~ msgstr "디스크에서 다시 로드"

#~ msgid "Show &labels"
#~ msgstr "레이블 & 표시 "

#~ msgid ""
#~ "Copying of the temporary G-code to the output G-code failed. Maybe the SD "
#~ "card is write locked?"
#~ msgstr ""
#~ "임시 G-code를 출력할 SD카드에 복사하는 데 실패했습니다. SD카드의 락을 확"
#~ "인 하시오."

#~ msgid "Not found: "
#~ msgstr "찾을 수 없음:"

#~ msgid ""
#~ "Zero layer height is not valid.\n"
#~ "\n"
#~ "The layer height will be reset to 0.01."
#~ msgstr ""
#~ "바닥 레이어 높이가 잘못되었습니다.\n"
#~ "\n"
#~ "레이어 높이가 0.01로 재설정됩니다."

#~ msgid ""
#~ "Zero first layer height is not valid.\n"
#~ "\n"
#~ "The first layer height will be reset to 0.01."
#~ msgstr ""
#~ "첫 번째 레이어 높이가 0이면 유효하지 않습니다.\n"
#~ "\n"
#~ "첫 번째 레이어 높이는 0.01로 재설정됩니다."

#, no-c-format
#~ msgid ""
#~ "The Spiral Vase mode requires:\n"
#~ "- one perimeter\n"
#~ "- no top solid layers\n"
#~ "- 0% fill density\n"
#~ "- no support material\n"
#~ "- inactive Ensure vertical shell thickness"
#~ msgstr ""
#~ "나선형 꽃병 모드는 다음을 필요로 합니다.\n"
#~ "- 하나의 둘레\n"
#~ "- 상단 솔리드 레이어 없음\n"
#~ "- 0% 충진 밀도\n"
#~ "- 서포트가 필요 없음\n"
#~ "- 비활성 수직 쉘 두께 보장"

#~ msgid ""
#~ "Remove user profiles - install from scratch (a snapshot will be taken "
#~ "beforehand)"
#~ msgstr "사용자 프로필 제거 - 처음부터 설치 (스냅숏 값은 먼저 저장 됩니다.)"

#~ msgid "Extruder and Bed Temperatures"
#~ msgstr "익스트루더와 배드 온도"

#~ msgid "You have to select at least one filament for selected printers"
#~ msgstr "선택한 프린터에 대해 필라멘트를 하나 이상 선택해야 합니다."

#~ msgid "Do you want to automatic select default filaments?"
#~ msgstr "기본 필라멘트를 자동으로 선택하시겠습니까?"

#~ msgid "You have to select at least one material for selected printers"
#~ msgstr "선택한 프린터에 대해 하나 이상의 재질을 선택해야 합니다."

#~ msgid "Do you want to automatic select default materials?"
#~ msgstr "기본 재질을 자동으로 선택하시겠습니까?"

#~ msgid "Layer height:"
#~ msgstr "레이어 높이:"

#~ msgid "Place bearings in slots and resume"
#~ msgstr "슬롯에 베어링을 배치하고 다시 시작"

#~ msgid "For jump to print Z use left mouse button click OR (Shift+G)"
#~ msgstr "Z를 인쇄하는 점프를 위해 왼쪽 마우스 버튼을 클릭 (Shift +G)"

#~ msgid ""
#~ "For set extruder sequence for whole print use right mouse button click"
#~ msgstr "전체 인쇄 용 돌출부 시퀀스 설정용 마우스 버튼 클릭"

#~ msgid "Jump to print Z"
#~ msgstr "Z 인쇄로 이동"

#~ msgid "For edit current color use right mouse button click on colored band"
#~ msgstr "현재 색상 사용 오른쪽 마우스 버튼을 편집하려면 컬러 밴드를 클릭"

#~ msgid "Slider(print) mode"
#~ msgstr "슬라이더(인쇄) 모드"

#~ msgid "For add change extruder use left mouse button click"
#~ msgstr "추가 변경 압출기 사용 왼쪽 마우스 단추 단추를 클릭"

#~ msgid ""
#~ "For add color change use left mouse button click if you want to use "
#~ "colors from default color list, or Shift + left mouse button click if you "
#~ "want to select a color"
#~ msgstr ""
#~ "색상 변경 추가하려면 기본 색상 목록에서 색상을 사용하려는 경우 왼쪽 마우"
#~ "스 버튼을 클릭하거나 색상을 선택하려면 Shift + 왼쪽 마우스 버튼을 클릭하십"
#~ "시오."

#~ msgid "For add color change use left mouse button click"
#~ msgstr "색상 변경 추가하려면 왼쪽 마우스 버튼을 클릭하십시오."

#~ msgid "For add another code use Ctrl + left mouse button click"
#~ msgstr "다른 코드를 추가하려면 Ctrl + 왼쪽 마우스 버튼을 클릭"

#~ msgid "For add another code use right mouse button click"
#~ msgstr "다른 코드를 추가하려면 오른쪽 마우스 버튼을 클릭하십시오."

#~ msgid "Extruder(tool) is changed to Extruder \"%1%\""
#~ msgstr "압출기(도구)가 압출기 \"%1%\"로 변경됩니다."

#~ msgid "\"%1%\""
#~ msgstr "\"%1%\""

#~ msgid ""
#~ "G-code of this tick has a conflict with slider(print) mode.\n"
#~ "Any its editing will cause a changes of DoubleSlider data."
#~ msgstr ""
#~ "이 틱의 G 코드는 슬라이더(인쇄) 모드와 충돌합니다.\n"
#~ "편집하면 두개의 슬라이더 데이터가 변경됩니다."

#~ msgid ""
#~ "There is a color change for extruder that wouldn't be used till the end "
#~ "of printing.\n"
#~ "This code wouldn't be processed during GCode generation."
#~ msgstr ""
#~ "인쇄가 끝날 때까지 사용되지 않는 압출기의 색상 변경이 있습니다.\n"
#~ "이 코드는 GCode 생성 중에 처리되지 않습니다."

#~ msgid ""
#~ "There is a extruder change to the same extruder.\n"
#~ "This code wouldn't be processed during GCode generation."
#~ msgstr ""
#~ "동일한 압출기로 돌출기 변경이 있습니다.\n"
#~ "이 코드는 GCode 생성 중에 처리되지 않습니다."

#~ msgid ""
#~ "There is a color change for extruder that has not been used before.\n"
#~ "Check your choice to avoid redundant color changes."
#~ msgstr ""
#~ "이전에 사용되지 않은 압출기의 색상 변경이 있습니다.\n"
#~ "중복 색상 변경을 방지하려면 선택 사항을 확인하십시오."

#~ msgid "For Delete tick use left mouse button click OR pres \"-\" key"
#~ msgstr "삭제 진드기 사용 왼쪽 마우스 버튼 클릭 또는 \"-\" 키를 pres"

#~ msgid "For Edit tick use Ctrl + Left mouse button click"
#~ msgstr "편집 진드기 사용 Ctrl + 왼쪽 마우스 버튼을 클릭"

#~ msgid "For Edit tick use right mouse button click"
#~ msgstr "편집 사용 오른쪽 마우스 버튼을 클릭"

#~ msgid "Set extruder sequence for whole print"
#~ msgstr "전체 인쇄를 위한 압출기 시퀀스 설정"

#~ msgid "Custom Gcode on current layer (%1% mm)."
#~ msgstr "현재 레이어에 사용자 지정 Gcode(%1% mm)."

#~ msgid "Enter short message shown on Printer display during pause print"
#~ msgstr ""
#~ "일시 정지시 인쇄 중에 프린터 디스플레이에 표시된 짧은 메시지를 입력합니다."

#~ msgid "Enter print z value to jump to"
#~ msgstr "인쇄 z 값을 입력하여"

#~ msgid "Jump to print z"
#~ msgstr "Z 인쇄로 이동"

#~ msgid ""
#~ "The last color change data was saved for a single extruder printer "
#~ "profile."
#~ msgstr ""
#~ "단일 압출기 프린터 프로파일에 대해 마지막 색상 변경 데이터가 저장되었습니"
#~ "다."

#~ msgid ""
#~ "The last color change data was saved for a multiple extruder printer "
#~ "profile."
#~ msgstr ""
#~ "여러 압출기 프린터 프로파일에 대해 마지막 색상 변경 데이터가 저장되었습니"
#~ "다."

#~ msgid ""
#~ "Your current changes will cause a deletion of all saved color changes."
#~ msgstr "현재 변경으로 인해 저장된 모든 색상 변경 내용이 삭제됩니다."

#~ msgid ""
#~ "Select YES if you want to delete all saved tool changes,\n"
#~ "NO if you want all tool changes switch to color changes,\n"
#~ "or CANCEL for do nothing"
#~ msgstr ""
#~ "저장된 도구 변경 내용을 모두 삭제하려면 YES를 선택합니다.\n"
#~ "아니오 모든 도구 변경 이 색상 변경으로 전환하려면\n"
#~ "또는 아무것도 하지 않는 취소"

#~ msgid ""
#~ "Your current changes will cause a deletion of all saved tool changes."
#~ msgstr "현재 변경 으로 인해 저장된 모든 도구 변경 내용이 삭제됩니다."

#~ msgid "An object outside the print area was detected"
#~ msgstr "인쇄 영역 밖에 있는 객체(object)가 감지 되었습니다"

#~ msgid "A toolpath outside the print area was detected"
#~ msgstr "인쇄 영역 밖에 있는 공구 경로가 감지 되었습니다"

#~ msgid "SLA supports outside the print area were detected"
#~ msgstr "인쇄 영역 외부의 SLA 서포트가 감지 됨"

#~ msgid "Some objects are not visible"
#~ msgstr "일부 개체가 표시되지 않습니다"

#~ msgid ""
#~ "An object outside the print area was detected\n"
#~ "Resolve the current problem to continue slicing"
#~ msgstr ""
#~ "인쇄 영역 밖에 있는 객체(object)가 감지 되었습니다.\n"
#~ "현재 문제를 해결하고 슬라이싱을 계속 합니다"

#~ msgid "Default print color"
#~ msgstr "기본 인쇄 색상"

#~ msgid "Pause print or custom G-code"
#~ msgstr "인쇄 또는 사용자 지정 G-코드 일시 중지"

#, c-format
#~ msgid "up to %.2f mm"
#~ msgstr "최대%.2f mm"

#, c-format
#~ msgid "above %.2f mm"
#~ msgstr "above %.2f mm"

#, c-format
#~ msgid "%.2f - %.2f mm"
#~ msgstr "%.2f - %.2f mm"

#, c-format
#~ msgid "Color change for Extruder %d at %.2f mm"
#~ msgstr "압출기 %d의 색상 변화 %.2f mm"

#~ msgid "Click right mouse button to open History"
#~ msgstr "마우스 오른쪽 버튼을 클릭하여 기록을 엽니다."

#~ msgid ""
#~ "As a workaround, you may run PrusaSlicer with a software rendered 3D "
#~ "graphics by running prusa-slicer.exe with the --sw_renderer parameter."
#~ msgstr ""
#~ "해결 방법으로 prusaSlicer를 \"sw_renderer 매개 변수\"로 prusa-slicer.exe"
#~ "를 실행하여 3D 그래픽을 렌더링한 소프트웨어로 실행할 수 있습니다."

#~ msgid "Hollowing and drilling"
#~ msgstr "공동화 및 드릴링"

#~ msgid "SLA gizmo turned on"
#~ msgstr "SLA 개체(gizmo)이동 켜기"

#~ msgid "Save changes?"
#~ msgstr "변경 사항을 저장 하시겠습니까?"

#~ msgid "SLA gizmo turned off"
#~ msgstr "SLA 개체(gizmo) 이동 끄기"

#~ msgid "Check for updates"
#~ msgstr "업데이트 확인"

#~ msgid "Change Application &Language"
#~ msgstr "응용 프로그램 언어 번경"

#~ msgid "Taking configuration snapshot"
#~ msgstr "구성 스냅 샷 만들기"

#~ msgid "The presets on the following tabs were modified"
#~ msgstr "다음 탭의 사전 설정이 수정 되었습니다"

#~ msgid "Discard changes and continue anyway?"
#~ msgstr "수정된 사항을 취소하고 계속하겠습니까?"

#~ msgid "Unsaved Presets"
#~ msgstr "저장되지 않은 기존설정"

#~ msgid "Please check and fix your object list."
#~ msgstr "객체(object) 목록을 확인 하고 수정 하십시오."

#, c-format
#~ msgid "Auto-repaired (%d errors):"
#~ msgstr "오류자동수정 (%d errors):"

#~ msgid "degenerate facets"
#~ msgstr "더러운 면"

#~ msgid "edges fixed"
#~ msgstr "모서리 고정"

#~ msgid "facets removed"
#~ msgstr "면 제거"

#~ msgid "facets added"
#~ msgstr "면 추가됨"

#~ msgid "facets reversed"
#~ msgstr "면 반전"

#~ msgid "backwards edges"
#~ msgstr "뒤쪽 가장자리"

#~ msgid "Select new extruder for the object/part"
#~ msgstr "객체(object)/부품(Part)에 대한 새 압출(익스트루더) 기 선택"

#~ msgid "Select extruder number for selected objects and/or parts"
#~ msgstr ""
#~ "선택한 객체(object) 및 부품(Part)에 대한 압출기(익스트루더) 번호 선택"

#~ msgid "Select extruder number:"
#~ msgstr "압출기(익스트루더) 번호 선택:"

#~ msgid "This extruder will be set for selected items"
#~ msgstr "선택한 항목에 대한 압출기(익스트루더) 설정"

#~ msgid "Unretractions"
#~ msgstr "리트랙션 취소"

#~ msgid "Legend"
#~ msgstr "범례"

#~ msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
#~ msgstr "프로젝트 구성 열기(STL/OBJ/AMF/3MF), 배드 삭제"

#~ msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
#~ msgstr "구성 없이 가져오기(STL/OBJ/AMF/3MF), 배드 유지"

#~ msgid "Load Config from .ini/amf/3mf/gcode"
#~ msgstr ".Ini/amf/3mf/gcode에서 구성 가져오기"

#~ msgid "Save project (3MF)"
#~ msgstr "프로젝트 저장 (3MF)"

#~ msgid "Load Config from .ini/amf/3mf/gcode and merge"
#~ msgstr ".Ini/amf/3mf/gcode 및 병합에서 구성 가져오기"

#~ msgid "Press to select multiple object or move multiple object with mouse"
#~ msgstr ""
#~ "여러 객체(object)를 선택 하거나 마우스로 여러 객체(object)를 이동 하려면 "
#~ "누릅니다"

#~ msgid "Main Shortcuts"
#~ msgstr "주요 단축키"

#~ msgid "Select All objects"
#~ msgstr "모든 객체(object) 선택"

#~ msgid "Delete All"
#~ msgstr "전부 지움"

#, no-c-format
#~ msgid ""
#~ "Press to activate selection rectangle\n"
#~ "or to snap by 5% in Gizmo scale\n"
#~ "or to snap by 1mm in Gizmo move"
#~ msgstr ""
#~ "활성화된 사각형을 선택합니다.\n"
#~ "5% in 객체(object) 크기를 스냅에 맞춰 조절합니다.\n"
#~ "1mm 씩 객체(object)를 스냅에 맞추 이동합니다."

#~ msgid ""
#~ "Press to scale selection to fit print volume\n"
#~ "in Gizmo scale"
#~ msgstr "개체(Gizmo)크기를 인쇄 볼륨에 맞게 조정하려면 누릅니다."

#~ msgid ""
#~ "Press to activate deselection rectangle\n"
#~ "or to scale or rotate selected objects\n"
#~ "around their own center"
#~ msgstr ""
#~ "중재봉선 주변으로. 선택한 개체의 크기를 조정 하거나 \n"
#~ "회전 하려면 누릅니다"

#~ msgid "Press to activate one direction scaling in Gizmo scale"
#~ msgstr "개체(Gizmo) 크기 조절을 활성화 합니다."

#~ msgid "Zoom to all objects in scene, if none selected"
#~ msgstr "모든 객체(object)를 확대/축소 (선택 하지 않은 경우)"

#~ msgid "Zoom to selected object"
#~ msgstr "선택한 객체(object)를 확대/축소"

#~ msgid "Unselect gizmo / Clear selection"
#~ msgstr "개체(Gizmo) 선택을 취소 하거나 지우기"

#~ msgid "Plater Shortcuts"
#~ msgstr "플레이터 단축기"

#~ msgid "Upper Layer"
#~ msgstr "상위 레이어"

#~ msgid "Lower Layer"
#~ msgstr "하위 레이어"

#~ msgid "Show/Hide (L)egend"
#~ msgstr "표시/숨기기(L)egend"

#~ msgid "Preview Shortcuts"
#~ msgstr "미리보기 단축기"

#~ msgid "Move current slider thumb Up"
#~ msgstr "현재 마우스 휠을 위로 이동"

#~ msgid "Move current slider thumb Down"
#~ msgstr "현재 마우스 휠을 아래로 이동"

#~ msgid "Set upper thumb to current slider thumb"
#~ msgstr "마우스 휠을 위로 움직여 설정"

#~ msgid "Set lower thumb to current slider thumb"
#~ msgstr "마우스 휠을 아래로 움직여 설정"

#~ msgid "Layers Slider Shortcuts"
#~ msgstr "레이어 슬라이더 단축키"

#~ msgid ""
#~ " - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/"
#~ "releases"
#~ msgstr ""
#~ " -http://github.com/prusa3d/slic3r/releases에서 업데이트 확인하는 것을 잊"
#~ "지 마십시오"

#~ msgid "The selected project is no more available"
#~ msgstr "선택한 프로젝트를 더 이상 사용할 수 없습니다."

#~ msgid "Export plate as &AMF"
#~ msgstr "AMF로 내보내기"

#~ msgid "Export current plate as AMF"
#~ msgstr "현재 플레이터를 AMF로 내보내기"

#~ msgid " was successfully sliced."
#~ msgstr " 성공적으로 슬라이스."

#~ msgid "Materials"
#~ msgstr "재료"

#~ msgid "Manifold"
#~ msgstr "많은"

#~ msgid "Remove device"
#~ msgstr "장치 제거"

#~ msgid "Export to SD card/ USB thumb drive"
#~ msgstr "SD 카드/USB 썸 드라이브로 내보내기"

#, c-format
#~ msgid "%d (%d shells)"
#~ msgstr "% d (% d 쉘)"

#, c-format
#~ msgid "Auto-repaired (%d errors)"
#~ msgstr "오류자동수정 (%d errors)"

#, c-format
#~ msgid ""
#~ "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, "
#~ "%d facets reversed, %d backwards edges"
#~ msgstr ""
#~ "%d 면 고정, %d 모서리 고정, %d 면 제거, %d 면 추가, %d 면 반전, %d 후방 모"
#~ "서리"

#~ msgid "Yes"
#~ msgstr "예"

#~ msgid "object(s)"
#~ msgstr "객체(object)"

#, c-format
#~ msgid "Processing input file %s"
#~ msgstr "입력 파일 처리 %s"

#~ msgid ""
#~ "This file contains several objects positioned at multiple heights.\n"
#~ "Instead of considering them as multiple objects, should I consider\n"
#~ "this file as a single object having multiple parts?"
#~ msgstr ""
#~ "이 파일에는 여러 높이마다 객체(object)가 있습니다. 여러 객체(object)로 간"
#~ "주하는 대신,\n"
#~ "이 파일은 여러 부품을 갖는 단일 객체(object)로 보입니까?"

#~ msgid "Loaded"
#~ msgstr "로드(loaded)"

#~ msgid "Hollow"
#~ msgstr "속비우기"

#~ msgid "Indexing hollowed object"
#~ msgstr "빈 개체 인덱싱"

#~ msgid "Hollowing cancelled."
#~ msgstr "공동화 취소."

#~ msgid "Hollowing done."
#~ msgstr "속을 비움니다."

#~ msgid "Hollowing failed."
#~ msgstr "공동화를 실패했습니다."

#~ msgid ""
#~ "The selected object can't be split because it contains more than one "
#~ "volume/material."
#~ msgstr ""
#~ "선택한 객체(object)는 둘 이상의 부품/재료가 포함되어 있기 때문에 분할 할 "
#~ "수 없습니다."

#~ msgid "Ready to slice"
#~ msgstr "슬라이스 준비"

#~ msgid "It is not allowed to change the file to reload"
#~ msgstr "다시 로드할 파일을 변경할 수 없습니다."

#~ msgid "Do you want to retry"
#~ msgstr "다시 시도하시겠습니까?"

#~ msgid "Reload from: "
#~ msgstr "다음에서 다시 로드합니다."

#~ msgid "Fix Throught NetFabb"
#~ msgstr "NetFabb으로 수정"

#~ msgid "Export failed"
#~ msgstr "내보내기 실패"

#~ msgid "Reload the selected object from disk"
#~ msgstr "디스크에서 선택한 개체 다시 로드"

#~ msgid "Export the selected object as STL file"
#~ msgstr "선택한 객체(object)를 STL 파일로 내보내기"

#~ msgid "Split the selected object into individual sub-parts"
#~ msgstr "선택한 객체(object)를 개별 하위 부품(Part)으로 분할"

#~ msgid "Optimize the rotation of the object for better print results."
#~ msgstr "더 나은 인쇄 결과를 위해 객체(object)의 회전을 최적화합니다."

#~ msgid ""
#~ "%1% printer was active at the time the target Undo / Redo snapshot was "
#~ "taken. Switching to %1% printer requires reloading of %1% presets."
#~ msgstr ""
#~ "%1% 프린터가 대상을 '되돌리기/취소하기' 작업 구성을 생성할 때 활성화되었습"
#~ "니다. %1% 프린터로 전환하려면 %1% 사전 설정을 다시 불러와야 합니다."

#~ msgid "Save SL1 file as:"
#~ msgstr "SL1 파일 다른이름 저장:"

#, c-format
#~ msgid "STL file exported to %s"
#~ msgstr "내보낸 STL 파일 %s"

#, c-format
#~ msgid "AMF file exported to %s"
#~ msgstr "내보낸 AMF 파일 %s"

#, c-format
#~ msgid "Error exporting AMF file %s"
#~ msgstr "AMF 파일 내보내기 오류 %s"

#, c-format
#~ msgid "3MF file exported to %s"
#~ msgstr "3MF 파일을 내보냈습니다 %s"

#, c-format
#~ msgid "Error exporting 3MF file %s"
#~ msgstr "3MF 파일 내보내기 오류 %s"

#~ msgid ""
#~ "If enabled, PrusaSlicer will check for the new versions of itself online. "
#~ "When a new version becomes available a notification is displayed at the "
#~ "next application startup (never during program usage). This is only a "
#~ "notification mechanisms, no automatic installation is done."
#~ msgstr ""
#~ "프루사 슬라이서는 온라인의 새로운 버전을 확인합니다. 새 버전을 사용할 수 "
#~ "있게되면 다음 응용 프로그램 시작시 (프로그램 사용 중이 아님) 알림이 표시 "
#~ "됩니다. 이는 알림 메커니즘일뿐이며 자동 설치는 수행되지 않습니다."

#, c-format
#~ msgid "You need to restart %s to make the changes effective."
#~ msgstr "변경 내용을 적용 하려면 %s를 다시 시작 해야 합니다."

#~ msgid "Add a new printer"
#~ msgstr "새 프린터 추가"

#~ msgid "During the other layers, fan"
#~ msgstr "다른 레이어의, 팬설정"

#~ msgid "Fan"
#~ msgstr "팬(Fan)"

#~ msgid "will always run at %1%%%"
#~ msgstr "항상 다음처럼 실행 %1%%%"

#~ msgid "will be turned off."
#~ msgstr "off 됩니다."

#~ msgid "Start printing after upload"
#~ msgstr "업로드 후 인쇄 시작"

#, c-format
#~ msgid ""
#~ "Current preset is inherited from:\n"
#~ "\t%s"
#~ msgstr "전의 %s 설정에서 가져 옵니다 "

#~ msgid "Extruder clearance (mm)"
#~ msgstr "익스트루더 간격(mm)"

#, c-format
#~ msgid ""
#~ "On this system, %s uses HTTPS certificates from the system Certificate "
#~ "Store or Keychain.\n"
#~ msgstr ""
#~ "이 시스템에서 %s는 시스템 인증서 저장소나 키체인의 HTTPS 인증서를 사용 합"
#~ "니다.\n"

#~ msgid "USB/Serial connection"
#~ msgstr "USB/시리얼 연결"

#~ msgid "Serial port"
#~ msgstr "시리얼 포트"

#~ msgid "Rescan serial ports"
#~ msgstr "시리얼포트 재검색"

#~ msgid "Connection to printer works correctly."
#~ msgstr "프린터 연결이 올바르게 작동합니다."

#~ msgid "Connection failed."
#~ msgstr "연결 실패."

#, c-format
#~ msgid "Default preset (%s)"
#~ msgstr "시스템 기본값 (%s)"

#, c-format
#~ msgid "Preset (%s)"
#~ msgstr "프리셋 ( %s)"

#~ msgid "has the following unsaved changes:"
#~ msgstr "저장되지 않은 수정사항:"

#~ msgid "is not compatible with printer"
#~ msgstr "프린터와 호완 되지 않습니다"

#~ msgid "is not compatible with print profile"
#~ msgstr "인쇄 프로필과 호환 되지 않음"

#~ msgid "and it has the following unsaved changes:"
#~ msgstr "저장되지 않은 변경점은 다음과 같습니다:"

#~ msgctxt "PresetName"
#~ msgid "%1% - Copy"
#~ msgstr "%1%-복사"

#~ msgid "Configuration update is necessary to install"
#~ msgstr "설치하려면 구성 업데이트가 필요합니다."

#~ msgid "No updates aviable"
#~ msgstr "실행 가능한 업데이트없음"

#, c-format
#~ msgid "%s has no configuration updates aviable."
#~ msgstr "%s에는 구성 업데이트가 실행 가능한 업데이트가 없습니다."

#~ msgid "Model fixing"
#~ msgstr "모델 고정"

#~ msgid "Exporting model..."
#~ msgstr "소스 모델 내보내기..."

#~ msgid "Model repaired successfully"
#~ msgstr "모델이 성공적으로 복구 되었습니다"

#~ msgid "Model Repair by the Netfabb service"
#~ msgstr "Netfabb 서비스에의 한 모델 복구"

#~ msgid "Model repair failed:"
#~ msgstr "모델 복구 실패:"

#~ msgid "Connection to Prusa SL1 works correctly."
#~ msgstr "Prusa SL1에 대한 연결이 제대로 작동 합니다."

#~ msgid "Empty layers detected, the output would not be printable."
#~ msgstr "빈 레이어가 감지되면 출력을 인쇄할 수 없습니다."

#~ msgid "Print z"
#~ msgstr "인쇄 z"

#~ msgid ""
#~ "This is usually caused by negligibly small extrusions or by a faulty "
#~ "model. Try to repair the model or change its orientation on the bed."
#~ msgstr ""
#~ "이는 일반적으로 무시할 수 있는 작은 돌출 또는 결함이 있는 모델에 의해 발생"
#~ "합니다. 모델을 수리하거나 배드에서 방향을 변경하십시오."

#~ msgid ""
#~ "The Spiral Vase option can only be used when printing a single object."
#~ msgstr ""
#~ "나선형 꽃병(Spiral Vase) 옵션은 단일 객체(object)를 인쇄 할 때만 사용할 "
#~ "수 있습니다."

#~ msgid ""
#~ "The Wipe Tower is currently only supported for the Marlin, RepRap/"
#~ "Sprinter and Repetier G-code flavors."
#~ msgstr ""
#~ "와이프 타워는 현재 말린, RepRap/Sprinter 및 리피티어에 대해서만 G-code지"
#~ "원 됩니다."

#~ msgid "Generating skirt"
#~ msgstr "스커트 생성"

#~ msgid "Generating brim"
#~ msgstr "브림 생성"

#~ msgid "Picture sizes to be stored into a .gcode and .sl1 files"
#~ msgstr ".gcode 및 .sl1 파일에 저장할 그림 크기"

#~ msgid ""
#~ "Slic3r can upload G-code files to a printer host. This field should "
#~ "contain the hostname, IP address or URL of the printer host instance."
#~ msgstr ""
#~ "Slic3r는 프린터 호스트에 G 코드 파일을 업로드할 수 있습니다. 이 필드는 호"
#~ "스트 이름, IP 주소 또는 프린터 호스트 복제본의 URL을 포함 해야 합니다."

#~ msgid ""
#~ "Horizontal width of the brim that will be printed around each object on "
#~ "the first layer."
#~ msgstr ""
#~ "첫 번째 레이어의 각 객체(object) 주위에 인쇄 될 가장자리의 가로 폭입니다."

#~ msgid ""
#~ "When printing with very low layer heights, you might still want to print "
#~ "a thicker bottom layer to improve adhesion and tolerance for non perfect "
#~ "build plates. This can be expressed as an absolute value or as a "
#~ "percentage (for example: 150%) over the default layer height."
#~ msgstr ""
#~ "매우 낮은 층의 높이로 인쇄할 때, 당신은 여전히 완벽하지 않은 빌드 플레이트"
#~ "의 부착력과 허용오차를 개선하기 위해 더 두꺼운 바닥 층을 인쇄하기를 원할 "
#~ "수 있다. 이것은 절대값 또는 기본 계층 높이에 대한 백분율(예: 150%)로 표시"
#~ "할 수 있다."

#~ msgid ""
#~ "Extruder temperature for first layer. If you want to control temperature "
#~ "manually during print, set this to zero to disable temperature control "
#~ "commands in the output file."
#~ msgstr ""
#~ "첫 번째 층의 외부 온도. 인쇄 중에 온도를 수동으로 제어하려면 출력 파일에"
#~ "서 온도 제어 명령을 사용하지 않으려면 이 값을 0으로 설정하십시오."

#~ msgid "Maximum acceleration when extruding (M204 S)"
#~ msgstr "압출 시 최대 가속도 (M204 S)"

#~ msgid "Maximum acceleration when retracting (M204 T)"
#~ msgstr "후퇴 시 최대 가속도 (M204 T)"

#~ msgid ""
#~ "This is the acceleration your printer will use for perimeters. A high "
#~ "value like 9000 usually gives good results if your hardware is up to the "
#~ "job. Set zero to disable acceleration control for perimeters."
#~ msgstr ""
#~ "프린터가 둘레로 사용할 가속도입니다. 9000과 같은 높은 값은 하드웨어가 제대"
#~ "로 작동하면 좋은 결과를 제공합니다. 주변을 가속 제어하지 않으려면 0으로 설"
#~ "정하십시오."

#~ msgid "Resolution"
#~ msgstr "해상도"

#~ msgid "USB/serial port for printer connection."
#~ msgstr "프린터 연결을 위한 USB/시리얼 포트."

#~ msgid "Serial port speed"
#~ msgstr "시리얼 포트 속도"

#~ msgid "Speed (baud) of USB/serial port for printer connection."
#~ msgstr "프린터 연결을 위한 USB/시리얼 포트의 속도(보드)"

#~ msgid "Distance from object"
#~ msgstr "객체(object)로부터의 거리"

#~ msgid ""
#~ "Distance between skirt and object(s). Set this to zero to attach the "
#~ "skirt to the object(s) and get a brim for better adhesion."
#~ msgstr ""
#~ "스커트와 객체(object) 사이의 거리. 스커트를 객체(object)에 부착하고 접착력"
#~ "을 높이기 위해 이를 0으로 설정한다."

#~ msgid ""
#~ "Height of skirt expressed in layers. Set this to a tall value to use "
#~ "skirt as a shield against drafts."
#~ msgstr ""
#~ "스커트의 높이 레이어로 표현된다. 이를 높은 값으로 설정하여 스커트를 드래프"
#~ "트에 대한 쉴ㄷ로 활용하십시오."

#~ msgid ""
#~ "This feature will raise Z gradually while printing a single-walled object "
#~ "in order to remove any visible seam. This option requires a single "
#~ "perimeter, no infill, no top solid layers and no support material. You "
#~ "can still set any number of bottom solid layers as well as skirt/brim "
#~ "loops. It won't work when printing more than an object."
#~ msgstr ""
#~ "이 기능은 단일 벽 개체를 인쇄하는 동안 눈에 보이는 재봉선을 제거하기 위해 "
#~ "Z를 점진적으로 상승시킨다. 이 옵션은 단일 둘레, 주입, 상단 솔리드 레이어 "
#~ "및 지지 재료가 필요하지 않다. 당신은 스커트/브림 루프뿐만 아니라 아래 솔리"
#~ "드 레이어의 수에 상관없이 설정할 수 있다. 그것은 개체보다 더 많이 인쇄할 "
#~ "때는 작동하지 않을 것이다."

#~ msgid "Contact Z distance"
#~ msgstr "Z 거리 문의"

#~ msgid "Interface layers"
#~ msgstr "접점 레이어"

#~ msgid ""
#~ "Extruder temperature for layers after the first one. Set this to zero to "
#~ "disable temperature control commands in the output."
#~ msgstr ""
#~ "첫 번째 것 이후에 레이어에 대한 더 낮은 온도. 이 값을 0으로 설정하면 출력"
#~ "에서 ​​온도 제어 명령을 비활성화 할 수 있습니다."

#~ msgid ""
#~ "This custom code is inserted before every toolchange. Placeholder "
#~ "variables for all PrusaSlicer settings as well as {previous_extruder} and "
#~ "{next_extruder} can be used. When a tool-changing command which changes "
#~ "to the correct extruder is included (such as T{next_extruder}), "
#~ "PrusaSlicer will emit no other such command. It is therefore possible to "
#~ "script custom behaviour both before and after the toolchange."
#~ msgstr ""
#~ "이 사용자 지정 코드는 모든 도구 변경 전에 삽입됩니다. 모든 PrusaSlicer 설"
#~ "정과 {previous_extruder} 및 {next_extruder}에 대한 자리 표시자 변수를 사용"
#~ "할 수 있습니다. 올바른 압출기로 변경되는 도구 변경 명령(예: "
#~ "T{next_extruder})이 포함되면 PrusaSlicer는 다른 명령을 내림차순을 내보릅니"
#~ "다. 따라서 도구 변경 전후에 사용자 지정 동작을 스크립팅할 수 있습니다."

#~ msgid ""
#~ "Purging after toolchange will done inside this object's infills. This "
#~ "lowers the amount of waste but may result in longer print time  due to "
#~ "additional travel moves."
#~ msgstr ""
#~ "도구 변경 후 제거는 이 객체(object)의 채우기 내부에서 수행 됩니다. 이렇게 "
#~ "하면 낭비 되는 양이 줄어들지만 추가적인 이동으로 인해 인쇄 시간이 길어질 "
#~ "수 있습니다."

#~ msgid "Support head front diameter"
#~ msgstr "서포트 헤드 전면 지름"

#~ msgid "Support head penetration"
#~ msgstr "서포트 헤드 관통"

#~ msgid "Support head width"
#~ msgstr "서포트 헤드 폭"

#~ msgid "Support pillar diameter"
#~ msgstr "서포트 기둥 지름"

#~ msgid "Support pillar connection mode"
#~ msgstr "기둥 연결 모드 지원"

#~ msgid "Hollowing thickness"
#~ msgstr "속빈 공동 두께"

#~ msgid "Hollowing accuracy"
#~ msgstr "속빈 공동 정확도"

#~ msgid "Hollowing closing distance"
#~ msgstr "속비움된 닫힘 반경"

#~ msgid "Processing triangulated mesh"
#~ msgstr "삼각 측정 메쉬 처리"