# PrusaSlicer print profiles for the Elegoo printers.
# By Andrew Suzuki (andrewsuzuki.com), adapted from Creality.ini

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Elegoo
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.1
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Elegoo/

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:NEPTUNE1]
name = Elegoo Neptune-1
variants = 0.4
technology = FFF
family = NEPTUNE
bed_model = 
bed_texture = 
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO

[printer_model:NEPTUNE2]
name = Elegoo Neptune-2
variants = 0.4
technology = FFF
family = NEPTUNE
bed_model = 
bed_texture = 
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO

[printer_model:NEPTUNE2D]
name = Elegoo Neptune-2D
variants = 0.4
technology = FFF
family = NEPTUNE
bed_model = 
bed_texture = 
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO

[printer_model:NEPTUNE2S]
name = Elegoo Neptune-2S
variants = 0.4
technology = FFF
family = NEPTUNE
bed_model = 
bed_texture = 
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO

[printer_model:NEPTUNE3]
name = Elegoo Neptune-3
variants = 0.4
technology = FFF
family = NEPTUNE
bed_model = 
bed_texture = 
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO

[printer_model:NEPTUNEX]
name = Elegoo Neptune-X
variants = 0.4
technology = FFF
family = NEPTUNE
bed_model = 
bed_texture = 
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 25
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
dont_support_bridges = 1
elefant_foot_compensation = 0.1
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 25
extra_perimeters = 0
extruder_clearance_height = 25
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = grid
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
gap_fill_speed = 30
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 50
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 40
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0
seam_position = nearest
single_extruder_multi_material_priming = 0
skirts = 1
skirt_distance = 2
skirt_height = 2
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.38
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 40
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_walls = 0
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 30
travel_speed = 150
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0

[print:*0.08mm*]
inherits = *common*
layer_height = 0.08
perimeters = 3
bottom_solid_layers = 9
top_solid_layers = 11

[print:*0.10mm*]
inherits = *common*
layer_height = 0.1
perimeters = 3
bottom_solid_layers = 7
top_solid_layers = 9

[print:*0.12mm*]
inherits = *common*
layer_height = 0.12
perimeters = 3
bottom_solid_layers = 6
top_solid_layers = 7

[print:*0.16mm*]
inherits = *common*
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 7

[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
bottom_solid_layers = 4
top_solid_layers = 5

[print:*0.24mm*]
inherits = *common*
layer_height = 0.24
top_infill_extrusion_width = 0.45
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.28mm*]
inherits = *common*
layer_height = 0.28
top_infill_extrusion_width = 0.45
bottom_solid_layers = 3
top_solid_layers = 4

[print:0.08mm SUPERDETAIL @ELEGOO]
inherits = *0.08mm*
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4

[print:0.10mm HIGHDETAIL @ELEGOO]
inherits = *0.10mm*
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4

[print:0.12mm DETAIL @ELEGOO]
inherits = *0.12mm*
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4

[print:0.16mm OPTIMAL @ELEGOO]
inherits = *0.16mm*
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4

[print:0.20mm NORMAL @ELEGOO]
inherits = *0.20mm*
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4

[print:0.24mm DRAFT @ELEGOO]
inherits = *0.24mm*
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4

[print:0.28mm SUPERDRAFT @ELEGOO]
inherits = *0.28mm*
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4

# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
#   https://www.thingiverse.com/thing:2615842
# Pay particular attention to bridging, overhangs and retractions.
# Also print the following bed adhesion test at 0.1 layer height as well:
#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
# At least for PLA, please keep bed temp at 60, as many Elegoo printers do not have any ABL
# So having some leeway to get good bed adhesion is not a luxury for many users

[filament:*common*]
cooling = 0
compatible_printers = 
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ELEGOO.*/

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_max_volumetric_speed = 15
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 210
fan_always_on = 1
cooling = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 205

[filament:*PET*]
inherits = *common*
bed_temperature = 70
cooling = 1
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_max_volumetric_speed = 8
filament_type = PETG
filament_density = 1.27
filament_cost = 20
first_layer_bed_temperature = 70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 20
bridge_fan_speed = 100
temperature = 240

[filament:*ABS*]
inherits = *common*
bed_temperature = 100
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_max_volumetric_speed = 11
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245

[filament:Generic PLA @ELEGOO]
inherits = *PLA*
filament_vendor = Generic

[filament:Generic PETG @ELEGOO]
inherits = *PET*
filament_vendor = Generic

[filament:Generic ABS @ELEGOO]
inherits = *ABS*
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic

# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
bed_shape = 0x0,220x0,220x220,0x220
between_objects_gcode = 
pause_print_gcode = 
deretract_speed = 0
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 60
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.3
min_layer_height = 0.07
max_print_height = 250
nozzle_diameter = 0.4
printer_notes = 
printer_settings_id = 
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
single_extruder_multi_material = 0
thumbnails = 16x16,220x124
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
printer_model = 
default_print_profile = 0.16mm OPTIMAL @ELEGOO
default_filament_profile = Generic PLA @ELEGOO

[printer:Elegoo Neptune-2]
inherits = *common*
printer_model = NEPTUNE2
printer_variant = 0.4
max_layer_height = 0.28
min_layer_height = 0.08
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2\nPRINTER_HAS_BOWDEN
max_print_height = 250
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 60
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
nozzle_diameter = 0.4
retract_before_travel = 2
retract_length = 5
retract_speed = 60
deretract_speed = 40
retract_before_wipe = 70%
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors


# Intended for printers with a smaller bed
# [printer:*fastabl*]
# start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0

# Intended for printers with a larger bed
# [printer:*slowabl*]
# start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0

# Intended for printers with vendor official firmware verified to support M25
# [printer:*pauseprint*]
# pause_print_gcode = M25 ; pause print

# Intended for printers where the Z-axis lowers the print bed during printing
# [printer:*invertedz*]
# end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed down further down\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors

# Intended for printers with dual extruders and a single hotend/nozzle
[printer:*dualextruder*]
single_extruder_multi_material = 1
cooling_tube_length = 23
cooling_tube_retraction = 35
extra_loading_move = -2
parking_pos_retraction = 80
deretract_speed = 40,40
extruder_colour = #0080C0;#FFFF9F
extruder_offset = 0x0,0x0
max_layer_height = 0.28,0.28
min_layer_height = 0.08,0.08
nozzle_diameter = 0.4,0.4
retract_before_travel = 2,2
retract_before_wipe = 70%,70%
retract_layer_change = 1,1
retract_length = 5,5
retract_length_toolchange = 1,1
retract_lift = 0,0
retract_lift_above = 0,0
retract_lift_below = 0,0
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retract_speed = 60,60
wipe = 1,1
start_gcode = T[initial_tool] ; set active extruder\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors

# Copy of Creality CR-X config for the Neptune 2D (dual extruder, single hotend)

[printer:Elegoo Neptune-2D]
inherits = Elegoo Neptune-2; *dualextruder*
retract_length = 6,6
printer_model = NEPTUNE2D
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN

[printer:Elegoo Neptune-2S]
inherits = Elegoo Neptune-2
printer_model = NEPTUNE2S
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN

[printer:Elegoo Neptune-X]
inherits = Elegoo Neptune-2
max_print_height = 300
printer_model = NEPTUNEX
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN

[printer:Elegoo Neptune-3]
inherits = Elegoo Neptune-2
max_print_height = 280
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
printer_model = NEPTUNE3
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN

[printer:Elegoo Neptune-1]
inherits = Elegoo Neptune-2
bed_shape = 0x0,210x0,210x210,0x210
max_print_height = 200
printer_model = NEPTUNE1
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN