# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2019-12-04 11:00+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"

#: src/slic3r/GUI/AboutDialog.cpp:39 src/slic3r/GUI/AboutDialog.cpp:291
msgid "Portions copyright"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:127 src/slic3r/GUI/AboutDialog.cpp:256
msgid "Copyright"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:129
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:199
#, possible-c-format
msgid "About %s"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:231 src/slic3r/GUI/MainFrame.cpp:63
msgid "Version"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:258
msgid "is licensed under the"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:259
msgid "GNU Affero General Public License, version 3"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:260
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:261
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""

#: src/slic3r/GUI/AppConfig.cpp:105
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manualy delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:100
msgid ""
"To except of redundant tool manipulation, \n"
"Color change(s) for unused extruder(s) was(were) deleted"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:101
#: src/slic3r/GUI/GUI_ObjectList.cpp:3290
#: src/slic3r/GUI/GUI_ObjectList.cpp:3365 src/slic3r/GUI/Plater.cpp:135
msgid "Info"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:110
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:111
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:461
msgid "Running post-processing scripts"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:113
msgid "G-code file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:117
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:167
msgid "Slicing complete"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163
msgid "Masked SLA file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:205
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:463
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:488
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:68 src/slic3r/GUI/GUI_ObjectList.cpp:1930
msgid "Shape"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:75
msgid "Rectangular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:79
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:154
#: src/slic3r/GUI/Tab.cpp:2292
msgid "Size"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:80
msgid "Size in X and Y of the rectangular plate."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:86
msgid "Origin"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:87
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:91
msgid "Circular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:94 src/slic3r/GUI/ConfigWizard.cpp:218
#: src/slic3r/GUI/ConfigWizard.cpp:934 src/slic3r/GUI/ConfigWizard.cpp:948
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:135
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:333
#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/slic3r/GUI/wxExtensions.cpp:628
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87
#: src/libslic3r/PrintConfig.cpp:75 src/libslic3r/PrintConfig.cpp:82
#: src/libslic3r/PrintConfig.cpp:91 src/libslic3r/PrintConfig.cpp:225
#: src/libslic3r/PrintConfig.cpp:300 src/libslic3r/PrintConfig.cpp:308
#: src/libslic3r/PrintConfig.cpp:358 src/libslic3r/PrintConfig.cpp:368
#: src/libslic3r/PrintConfig.cpp:494 src/libslic3r/PrintConfig.cpp:505
#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:702
#: src/libslic3r/PrintConfig.cpp:1228 src/libslic3r/PrintConfig.cpp:1289
#: src/libslic3r/PrintConfig.cpp:1307 src/libslic3r/PrintConfig.cpp:1325
#: src/libslic3r/PrintConfig.cpp:1379 src/libslic3r/PrintConfig.cpp:1389
#: src/libslic3r/PrintConfig.cpp:1511 src/libslic3r/PrintConfig.cpp:1519
#: src/libslic3r/PrintConfig.cpp:1560 src/libslic3r/PrintConfig.cpp:1568
#: src/libslic3r/PrintConfig.cpp:1578 src/libslic3r/PrintConfig.cpp:1586
#: src/libslic3r/PrintConfig.cpp:1594 src/libslic3r/PrintConfig.cpp:1677
#: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:1974
#: src/libslic3r/PrintConfig.cpp:2008 src/libslic3r/PrintConfig.cpp:2203
#: src/libslic3r/PrintConfig.cpp:2210 src/libslic3r/PrintConfig.cpp:2217
#: src/libslic3r/PrintConfig.cpp:2247 src/libslic3r/PrintConfig.cpp:2257
#: src/libslic3r/PrintConfig.cpp:2267 src/libslic3r/PrintConfig.cpp:2452
#: src/libslic3r/PrintConfig.cpp:2591 src/libslic3r/PrintConfig.cpp:2600
#: src/libslic3r/PrintConfig.cpp:2609 src/libslic3r/PrintConfig.cpp:2619
#: src/libslic3r/PrintConfig.cpp:2663 src/libslic3r/PrintConfig.cpp:2673
#: src/libslic3r/PrintConfig.cpp:2685 src/libslic3r/PrintConfig.cpp:2705
#: src/libslic3r/PrintConfig.cpp:2715 src/libslic3r/PrintConfig.cpp:2725
#: src/libslic3r/PrintConfig.cpp:2743 src/libslic3r/PrintConfig.cpp:2758
#: src/libslic3r/PrintConfig.cpp:2772 src/libslic3r/PrintConfig.cpp:2783
#: src/libslic3r/PrintConfig.cpp:2796 src/libslic3r/PrintConfig.cpp:2841
#: src/libslic3r/PrintConfig.cpp:2851 src/libslic3r/PrintConfig.cpp:2860
#: src/libslic3r/PrintConfig.cpp:2870
msgid "mm"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:699
msgid "Diameter"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:96
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:100 src/slic3r/GUI/GUI_Preview.cpp:248
#: src/libslic3r/ExtrusionEntity.cpp:322
msgid "Custom"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:104
msgid "Load shape from STL..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:157
msgid "Settings"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:174
msgid "Texture"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:184 src/slic3r/GUI/BedShapeDialog.cpp:263
msgid "Load..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:192 src/slic3r/GUI/BedShapeDialog.cpp:271
#: src/slic3r/GUI/Tab.cpp:3073
msgid "Remove"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:225 src/slic3r/GUI/BedShapeDialog.cpp:304
msgid "Not found: "
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:253
msgid "Model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:489
msgid "Choose an STL file to import bed shape from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:496 src/slic3r/GUI/BedShapeDialog.cpp:545
#: src/slic3r/GUI/BedShapeDialog.cpp:570
msgid "Invalid file format."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:507
msgid "Error! Invalid model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:515
msgid "The selected file contains no geometry."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:519
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:534
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:559
msgid "Choose an STL file to import bed model from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:59 src/slic3r/GUI/ConfigWizard.cpp:893
msgid "Bed Shape"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:218
msgid "Searching for devices"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:225
msgid "Finished"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:16
msgid "Buttons And Text Colors Description"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:36
msgid "Value is the same as the system value"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:53
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:48
msgid ""
"Zero layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:49
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 src/slic3r/GUI/Tab.cpp:1039
#: src/libslic3r/PrintConfig.cpp:71
msgid "Layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:60
msgid ""
"Zero first layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:878
msgid "First layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:75
#, no-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- no ensure_vertical_shell_thickness"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:82
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:83
msgid "Spiral Vase"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:107
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:111
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:112
#: src/slic3r/GUI/ConfigManipulation.cpp:132
msgid "Wipe Tower"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:128
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:131
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:151
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:154
msgid "Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:155
msgid "Support Generator"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:200
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:202
msgid "Shall I switch to rectilinear fill pattern?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:203
#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:89
#: src/slic3r/GUI/GUI_ObjectList.cpp:607 src/slic3r/GUI/Plater.cpp:516
#: src/slic3r/GUI/Tab.cpp:1071 src/slic3r/GUI/Tab.cpp:1072
#: src/libslic3r/PrintConfig.cpp:182 src/libslic3r/PrintConfig.cpp:405
#: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:765
#: src/libslic3r/PrintConfig.cpp:779 src/libslic3r/PrintConfig.cpp:816
#: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:980
#: src/libslic3r/PrintConfig.cpp:998 src/libslic3r/PrintConfig.cpp:1017
#: src/libslic3r/PrintConfig.cpp:1036 src/libslic3r/PrintConfig.cpp:1724
#: src/libslic3r/PrintConfig.cpp:1741
msgid "Infill"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:304
msgid "Head penetration should not be greater than the head width."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:306
msgid "Invalid Head penetration"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:317
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:319
msgid "Invalid pinhead diameter"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
msgid "Upgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Downgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "Before roll back"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
msgid "User"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
msgid "Unknown"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
msgid "Active"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
msgid "PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Preset.cpp:1392
msgid "print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "filaments"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 src/slic3r/GUI/Preset.cpp:1396
msgid "printer"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 src/slic3r/GUI/Tab.cpp:961
msgid "vendor"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57
msgid "version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
msgid "min PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
msgid "max PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63
msgid "model"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63
msgid "variants"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
#, possible-c-format
msgid "Incompatible with this %s"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
msgid "Activate"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:104
msgid "Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:218
msgid "nozzle"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:222
msgid "Alternate nozzles:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "All standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "Standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:290 src/slic3r/GUI/ConfigWizard.cpp:545
#: src/slic3r/GUI/Tab.cpp:3123
msgid "All"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:291 src/slic3r/GUI/ConfigWizard.cpp:546
#: src/slic3r/GUI/Plater.cpp:488 src/slic3r/GUI/Plater.cpp:628
#: src/libslic3r/ExtrusionEntity.cpp:309
msgid "None"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:412
#, possible-c-format
msgid "Welcome to the %s Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:414
#, possible-c-format
msgid "Welcome to the %s Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:416
msgid "Welcome"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:418
#, possible-c-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:423
msgid ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:466
#, possible-c-format
msgid "%s Family"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:537
msgid "Vendor:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:538
msgid "Profile:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:575 src/slic3r/GUI/ConfigWizard.cpp:603
msgid "(All)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:712
msgid "Custom Printer Setup"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:712
msgid "Custom Printer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:714
msgid "Define a custom printer profile"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:716
msgid "Custom profile name:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:740
msgid "Automatic updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:740
msgid "Updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:748 src/slic3r/GUI/Preferences.cpp:69
msgid "Check for application updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:752
#, possible-c-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:758 src/slic3r/GUI/Preferences.cpp:77
msgid "Update built-in Presets automatically"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:762
#, possible-c-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:765
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:770
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:777
msgid "View mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:779
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressivly more sophisticated "
"fine-tuning, they are suitable for advanced and expert usiser, respectively."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:784
msgid "Simple mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:785
msgid "Advanced mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:786
msgid "Expert mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:820
msgid "Other Vendors"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:824
#, possible-c-format
msgid "Pick another vendor supported by %s: (FIXME: this text)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:855
msgid "Firmware Type"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:855 src/slic3r/GUI/Tab.cpp:1917
msgid "Firmware"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:859
msgid "Choose the type of firmware used by your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:893
msgid "Bed Shape and Size"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:896
msgid "Set the shape of your printer's bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:916
msgid "Filament and Nozzle Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:916
msgid "Print Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:930
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:933
msgid "Nozzle Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:943
msgid "Enter the diameter of your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:944
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:947
msgid "Filament Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:981
msgid "Extruder and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:981
msgid "Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:997
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:998
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1001
msgid "Extrusion Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1002 src/slic3r/GUI/ConfigWizard.cpp:1016
msgid "°C"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1011
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1012
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1015
msgid "Bed Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1434 src/slic3r/GUI/ConfigWizard.cpp:1874
msgid "Filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1434 src/slic3r/GUI/ConfigWizard.cpp:1876
msgid "SLA Materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1488
msgid "FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1493
msgid "SLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1637
msgid "You have to select at least one filament for selected printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1643
msgid "You have to select at least one material for selected printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1843
msgid "Select all standard printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1846
msgid "< &Back"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1847
msgid "&Next >"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1848
msgid "&Finish"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1849 src/slic3r/GUI/FirmwareDialog.cpp:151
#: src/slic3r/GUI/ProgressStatusBar.cpp:27
msgid "Cancel"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1862
msgid "Prusa FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1865
msgid "Prusa MSLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1874
msgid "Filament Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1874 src/slic3r/GUI/GUI_ObjectList.cpp:3413
msgid "Type:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1876
msgid "SLA Material Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1876
msgid "Layer height:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1966
msgid "Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1967
msgid "Configuration &Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1969
msgid "Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1970
msgid "Configuration &Wizard"
msgstr ""

#: src/slic3r/GUI/Field.cpp:131
msgid "default value"
msgstr ""

#: src/slic3r/GUI/Field.cpp:134
msgid "parameter name"
msgstr ""

#: src/slic3r/GUI/Field.cpp:145 src/slic3r/GUI/OptionsGroup.cpp:570
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:170
#, possible-c-format
msgid "%s doesn't support percentage"
msgstr ""

#: src/slic3r/GUI/Field.cpp:190 src/slic3r/GUI/Field.cpp:221
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:376
msgid "Invalid numeric input."
msgstr ""

#: src/slic3r/GUI/Field.cpp:199
msgid "Input value is out of range"
msgstr ""

#: src/slic3r/GUI/Field.cpp:235
#, possible-c-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:238
msgid "Parameter validation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:150
msgid "Flash!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:199
msgid "Flashing failed"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:282
msgid "Flashing succeeded!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing failed. Please see the avrdude log below."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing cancelled."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:332
#, possible-c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454
#, possible-c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:436
#, possible-c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:548
#, possible-c-format
msgid "The %s device could not have been found"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:645
#, possible-c-format
msgid "Error accessing port at %s: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:647
#, possible-c-format
msgid "Error: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:777
msgid "Firmware flasher"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:802
msgid "Firmware image:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:805 src/slic3r/GUI/Tab.cpp:1635
#: src/slic3r/GUI/Tab.cpp:1691
msgid "Browse"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:807
msgid "Serial port:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:809
msgid "Autodetected"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:810
msgid "Rescan"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Progress:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Status:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Ready"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:841
msgid "Advanced: Output log"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:852
#: src/slic3r/GUI/PrintHostDialogs.cpp:161
msgid "Close"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:902
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:903
msgid "Confirmation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:906
msgid "Cancelling..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:240
msgid "Layer height profile"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:243
msgid "Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:246
msgid "Add detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:249
msgid "Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:252
msgid "Remove detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:255
msgid "Shift + Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:258
msgid "Reset to base"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:261
msgid "Shift + Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:264
msgid "Smoothing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:267
msgid "Mouse wheel:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:270
msgid "Increase/decrease edit area"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:273
msgid "Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:278
msgid "Cusp (mm)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:286
msgid "Smooth"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:291 src/libslic3r/PrintConfig.cpp:500
msgid "Radius"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:300
msgid "Keep min"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:307
msgid "Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:695
msgid "Layer height profile-Manual edit"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:794
msgid "An object outside the print area was detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:795
msgid "A toolpath outside the print area was detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:796
msgid "SLA supports outside the print area were detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:797
msgid "Some objects are not visible when editing supports"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:799
msgid ""
"An object outside the print area was detected\n"
"Resolve the current problem to continue slicing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1014 src/slic3r/GUI/GLCanvas3D.cpp:1042
msgid "Default print color"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1043 src/slic3r/GUI/GLCanvas3D.cpp:1052
#: src/slic3r/GUI/GLCanvas3D.cpp:1091
msgid "Pause print or custom G-code"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1064
#, possible-c-format
msgid "up to %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1068
#, possible-c-format
msgid "above %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1072
#, possible-c-format
msgid "%.2f - %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1086 src/slic3r/GUI/Tab.cpp:2288
#: src/slic3r/GUI/wxExtensions.cpp:3170 src/slic3r/GUI/wxExtensions.cpp:3421
#: src/libslic3r/GCode/PreviewData.cpp:451
#, possible-c-format
msgid "Extruder %d"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1099
#, possible-c-format
msgid "Color change for Extruder %d at %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1673
msgid "Layer height profile-Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1681
msgid "Layer height profile-Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1689
msgid "Layer height profile-Smooth all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2026
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3297
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3843
msgid "Undo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3843
msgid "Redo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3861
#, possible-c-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3861
#, possible-c-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4259
msgid "Add..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4267 src/slic3r/GUI/GUI_ObjectList.cpp:1590
#: src/slic3r/GUI/Plater.cpp:3712 src/slic3r/GUI/Plater.cpp:3734
#: src/slic3r/GUI/Tab.cpp:3073
msgid "Delete"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4276 src/slic3r/GUI/Plater.cpp:4410
msgid "Delete all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4285 src/slic3r/GUI/KBShortcutsDialog.cpp:137
#: src/slic3r/GUI/Plater.cpp:2758
msgid "Arrange"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4285 src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4297
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4306
msgid "Paste"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4318 src/slic3r/GUI/Plater.cpp:3569
#: src/slic3r/GUI/Plater.cpp:3581 src/slic3r/GUI/Plater.cpp:3721
msgid "Add instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4329 src/slic3r/GUI/Plater.cpp:3723
msgid "Remove instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4342
msgid "Split to objects"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4352 src/slic3r/GUI/GUI_ObjectList.cpp:1422
msgid "Split to parts"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4365 src/slic3r/GUI/GUI_ObjectList.cpp:2372
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4416 src/slic3r/GUI/MainFrame.cpp:571
msgid "Undo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4416 src/slic3r/GUI/GLCanvas3D.cpp:4449
msgid "Click right mouse button to open History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4433
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4449 src/slic3r/GUI/MainFrame.cpp:574
msgid "Redo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4465
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6380
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6399
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:283
#, possible-c-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:286
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:289
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw_renderer parameter."
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:291
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:145 src/libslic3r/PrintConfig.cpp:3329
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:150
msgid "Keep upper part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:151
msgid "Keep lower part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:152
msgid "Rotate lower part upwards"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:155
msgid "Perform cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:45
msgid "Place on face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:48
msgid "Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
msgid "Position (mm)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
msgid "Displacement (mm)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:449
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:480
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:499
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:517
#: src/libslic3r/PrintConfig.cpp:3378
msgid "Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:482
msgid "Rotation (deg)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:47
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:500
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:518
#: src/libslic3r/PrintConfig.cpp:3393
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:292
msgid "Scale (%)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
msgid "Lock supports under new islands"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1286
msgid "Remove selected points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
msgid "Remove all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1289
msgid "Apply changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1290
msgid "Discard changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
msgid "Minimal points distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55
#: src/libslic3r/PrintConfig.cpp:2732
msgid "Support points density"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1292
msgid "Auto-generate points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
msgid "Manual editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58
msgid "Clipping of view"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:59
msgid "Reset direction"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:442
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:578
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:754
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:820
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:929
msgid "SLA Support Points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:950
msgid "SLA gizmo turned on"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:972
msgid "Do you want to save your manually edited support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:973
msgid "Save changes?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:985
msgid "SLA gizmo turned off"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1022
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1121
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1190
msgid "Autogeneration will erase all manually edited points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1191
msgid "Are you sure you want to do it?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192 src/slic3r/GUI/GUI.cpp:246
#: src/slic3r/GUI/Tab.cpp:3033 src/slic3r/GUI/WipeTowerDialog.cpp:45
#: src/slic3r/GUI/WipeTowerDialog.cpp:366
msgid "Warning"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1195
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1249
msgid "SLA gizmo keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1260
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1278
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1281
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1282
msgid "Left click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1278
msgid "Add point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1279
msgid "Right click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1279
msgid "Remove point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1280
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1283
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1284
msgid "Drag"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1280
msgid "Move point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1281
msgid "Add point to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1282
msgid "Remove point from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1283
msgid "Select by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1284
msgid "Deselect by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1285
msgid "Select all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1287
msgid "Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1287
msgid "Move clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1288
msgid "Reset clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1291
msgid "Switch to editing mode"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:477
msgid "Gizmo-Place on Face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:550
msgid "Gizmo-Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:552
msgid "Gizmo-Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:554
msgid "Gizmo-Rotate"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:240
msgid "Notice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:137
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:140
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:448
msgid "Changing of an application language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:456 src/slic3r/GUI/GUI_App.cpp:465
msgid "Recreating"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:469
msgid "Loading of current presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:477
msgid "Loading of a mode view"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:558
msgid "Choose one file (3MF/AMF):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:570
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:632
msgid "Select the language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:632
msgid "Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:800
#, possible-c-format
msgid "Run %s"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:803
msgid "&Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:803
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:804
msgid "Take Configuration &Snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:804
msgid "Capture a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:807
msgid "&Preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:813
msgid "Application preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:816 src/slic3r/GUI/wxExtensions.cpp:3824
msgid "Simple"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:816
msgid "Simple View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:817 src/slic3r/GUI/GUI_ObjectList.cpp:97
#: src/slic3r/GUI/GUI_ObjectList.cpp:615 src/slic3r/GUI/Tab.cpp:1067
#: src/slic3r/GUI/Tab.cpp:1082 src/slic3r/GUI/Tab.cpp:1181
#: src/slic3r/GUI/Tab.cpp:1184 src/slic3r/GUI/Tab.cpp:1450
#: src/slic3r/GUI/Tab.cpp:1937 src/slic3r/GUI/Tab.cpp:3607
#: src/slic3r/GUI/wxExtensions.cpp:3825 src/libslic3r/PrintConfig.cpp:88
#: src/libslic3r/PrintConfig.cpp:202 src/libslic3r/PrintConfig.cpp:365
#: src/libslic3r/PrintConfig.cpp:1026 src/libslic3r/PrintConfig.cpp:2253
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:817
msgid "Advanced View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:818 src/slic3r/GUI/wxExtensions.cpp:3826
msgid "Expert"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:818
msgid "Expert View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:823
msgid "Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:823
#, possible-c-format
msgid "%s View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:825
msgid "Change Application &Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:827
msgid "Flash printer &firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:827
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:839
msgid "Taking configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:839
msgid "Snapshot name"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:882
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:884
msgid "Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:885
msgid "Language selection"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:908
msgid "&Configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:932
msgid "The presets on the following tabs were modified"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:932 src/slic3r/GUI/Tab.cpp:2901
msgid "Discard changes and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:935
msgid "Unsaved Presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1081 src/slic3r/GUI/Tab.cpp:2913
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1082
msgid "Please check and fix your object list."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1083 src/slic3r/GUI/Plater.cpp:2317
#: src/slic3r/GUI/Tab.cpp:2915
msgid "Attention!"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1100
msgid "Select a gcode file:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
msgid "Start at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
msgid "Stop at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:153
msgid "Remove layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:162
msgid "Add layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:88
#: src/slic3r/GUI/GUI_ObjectList.cpp:606 src/libslic3r/PrintConfig.cpp:72
#: src/libslic3r/PrintConfig.cpp:165 src/libslic3r/PrintConfig.cpp:397
#: src/libslic3r/PrintConfig.cpp:459 src/libslic3r/PrintConfig.cpp:467
#: src/libslic3r/PrintConfig.cpp:879 src/libslic3r/PrintConfig.cpp:1064
#: src/libslic3r/PrintConfig.cpp:1369 src/libslic3r/PrintConfig.cpp:1436
#: src/libslic3r/PrintConfig.cpp:1617 src/libslic3r/PrintConfig.cpp:2063
#: src/libslic3r/PrintConfig.cpp:2122
msgid "Layers and Perimeters"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:90
#: src/slic3r/GUI/GUI_ObjectList.cpp:608 src/slic3r/GUI/GUI_Preview.cpp:245
#: src/slic3r/GUI/Tab.cpp:1100 src/slic3r/GUI/Tab.cpp:1101
#: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/PrintConfig.cpp:349
#: src/libslic3r/PrintConfig.cpp:1497 src/libslic3r/PrintConfig.cpp:1855
#: src/libslic3r/PrintConfig.cpp:1861 src/libslic3r/PrintConfig.cpp:1869
#: src/libslic3r/PrintConfig.cpp:1881 src/libslic3r/PrintConfig.cpp:1891
#: src/libslic3r/PrintConfig.cpp:1899 src/libslic3r/PrintConfig.cpp:1914
#: src/libslic3r/PrintConfig.cpp:1935 src/libslic3r/PrintConfig.cpp:1947
#: src/libslic3r/PrintConfig.cpp:1963 src/libslic3r/PrintConfig.cpp:1972
#: src/libslic3r/PrintConfig.cpp:1981 src/libslic3r/PrintConfig.cpp:1992
#: src/libslic3r/PrintConfig.cpp:2006 src/libslic3r/PrintConfig.cpp:2014
#: src/libslic3r/PrintConfig.cpp:2015 src/libslic3r/PrintConfig.cpp:2024
#: src/libslic3r/PrintConfig.cpp:2032 src/libslic3r/PrintConfig.cpp:2046
msgid "Support material"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:94
#: src/slic3r/GUI/GUI_ObjectList.cpp:612 src/libslic3r/PrintConfig.cpp:2229
#: src/libslic3r/PrintConfig.cpp:2237
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:45
msgid "Pad and Support"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:51
msgid "Add part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:52
msgid "Add modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:53
msgid "Add support enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:54
msgid "Add support blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:91 src/slic3r/GUI/GUI_ObjectList.cpp:609
#: src/slic3r/GUI/GUI_Preview.cpp:223 src/slic3r/GUI/Tab.cpp:1125
#: src/libslic3r/PrintConfig.cpp:214 src/libslic3r/PrintConfig.cpp:447
#: src/libslic3r/PrintConfig.cpp:908 src/libslic3r/PrintConfig.cpp:1037
#: src/libslic3r/PrintConfig.cpp:1426 src/libslic3r/PrintConfig.cpp:1663
#: src/libslic3r/PrintConfig.cpp:1712 src/libslic3r/PrintConfig.cpp:1764
#: src/libslic3r/PrintConfig.cpp:2107
msgid "Speed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:92 src/slic3r/GUI/GUI_ObjectList.cpp:610
#: src/slic3r/GUI/Tab.cpp:1160 src/slic3r/GUI/Tab.cpp:1808
#: src/libslic3r/PrintConfig.cpp:477 src/libslic3r/PrintConfig.cpp:991
#: src/libslic3r/PrintConfig.cpp:1404 src/libslic3r/PrintConfig.cpp:1733
#: src/libslic3r/PrintConfig.cpp:1927 src/libslic3r/PrintConfig.cpp:1954
msgid "Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:93 src/slic3r/GUI/GUI_ObjectList.cpp:611
#: src/libslic3r/PrintConfig.cpp:436 src/libslic3r/PrintConfig.cpp:544
#: src/libslic3r/PrintConfig.cpp:866 src/libslic3r/PrintConfig.cpp:999
#: src/libslic3r/PrintConfig.cpp:1413 src/libslic3r/PrintConfig.cpp:1753
#: src/libslic3r/PrintConfig.cpp:1936 src/libslic3r/PrintConfig.cpp:2095
msgid "Extrusion Width"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:99 src/slic3r/GUI/GUI_ObjectList.cpp:617
#: src/slic3r/GUI/Plater.cpp:484 src/slic3r/GUI/Tab.cpp:3557
#: src/slic3r/GUI/Tab.cpp:3558 src/libslic3r/PrintConfig.cpp:2582
#: src/libslic3r/PrintConfig.cpp:2589 src/libslic3r/PrintConfig.cpp:2598
#: src/libslic3r/PrintConfig.cpp:2607 src/libslic3r/PrintConfig.cpp:2617
#: src/libslic3r/PrintConfig.cpp:2643 src/libslic3r/PrintConfig.cpp:2650
#: src/libslic3r/PrintConfig.cpp:2661 src/libslic3r/PrintConfig.cpp:2671
#: src/libslic3r/PrintConfig.cpp:2680 src/libslic3r/PrintConfig.cpp:2693
#: src/libslic3r/PrintConfig.cpp:2703 src/libslic3r/PrintConfig.cpp:2712
#: src/libslic3r/PrintConfig.cpp:2722 src/libslic3r/PrintConfig.cpp:2733
#: src/libslic3r/PrintConfig.cpp:2741
msgid "Supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:100 src/slic3r/GUI/GUI_ObjectList.cpp:618
#: src/slic3r/GUI/Plater.cpp:624 src/slic3r/GUI/Tab.cpp:3589
#: src/slic3r/GUI/Tab.cpp:3590 src/libslic3r/PrintConfig.cpp:2749
#: src/libslic3r/PrintConfig.cpp:2756 src/libslic3r/PrintConfig.cpp:2770
#: src/libslic3r/PrintConfig.cpp:2781 src/libslic3r/PrintConfig.cpp:2791
#: src/libslic3r/PrintConfig.cpp:2813 src/libslic3r/PrintConfig.cpp:2824
#: src/libslic3r/PrintConfig.cpp:2831 src/libslic3r/PrintConfig.cpp:2838
#: src/libslic3r/PrintConfig.cpp:2849 src/libslic3r/PrintConfig.cpp:2858
#: src/libslic3r/PrintConfig.cpp:2867
msgid "Pad"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:262
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153
msgid "Name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:270 src/slic3r/GUI/Tab.cpp:1414
#: src/slic3r/GUI/wxExtensions.cpp:549 src/libslic3r/PrintConfig.cpp:476
msgid "Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:274 src/slic3r/GUI/GUI_ObjectList.cpp:386
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:331
#, possible-c-format
msgid "Auto-repaired (%d errors):"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:338
msgid "degenerate facets"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:339
msgid "edges fixed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:340
msgid "facets removed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:341
msgid "facets added"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:342
msgid "facets reversed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:343
msgid "backwards edges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:351
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:388
msgid "Right button click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:390
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:394
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:396
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:449 src/slic3r/GUI/GUI_ObjectList.cpp:461
#: src/slic3r/GUI/GUI_ObjectList.cpp:905 src/slic3r/GUI/GUI_ObjectList.cpp:3820
#: src/slic3r/GUI/GUI_ObjectList.cpp:3830
#: src/slic3r/GUI/GUI_ObjectList.cpp:3862 src/slic3r/GUI/wxExtensions.cpp:734
#: src/slic3r/GUI/wxExtensions.cpp:791 src/slic3r/GUI/wxExtensions.cpp:816
#: src/slic3r/GUI/wxExtensions.cpp:1024 src/slic3r/GUI/wxExtensions.cpp:2240
msgid "default"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:541
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:541
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1066
#: src/slic3r/GUI/GUI_ObjectList.cpp:3641
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1084
msgid "Volumes in Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1084
msgid "Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1139
#: src/slic3r/GUI/GUI_ObjectList.cpp:1458
#: src/slic3r/GUI/GUI_ObjectList.cpp:1464
#: src/slic3r/GUI/GUI_ObjectList.cpp:1721
#, possible-c-format
msgid "Quick Add Settings (%s)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1216
msgid "Select showing settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1265
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1266
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1267
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1328
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1329
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1330
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1369
msgid "Load"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1374
#: src/slic3r/GUI/GUI_ObjectList.cpp:1402
#: src/slic3r/GUI/GUI_ObjectList.cpp:1405
msgid "Box"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1374
msgid "Cylinder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1374
msgid "Sphere"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1374
msgid "Slab"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1429
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1437
msgid "Add settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1505
msgid "Change type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1512
#: src/slic3r/GUI/GUI_ObjectList.cpp:1669
msgid "Set as a Separated Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1518
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1525
msgid "Rename"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1536
msgid "Fix through the Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1546 src/slic3r/GUI/Plater.cpp:3747
msgid "Export as STL"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1553 src/slic3r/GUI/Plater.cpp:3161
#: src/slic3r/GUI/Plater.cpp:3715 src/slic3r/GUI/Plater.cpp:3744
msgid "Reload from disk"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1553 src/slic3r/GUI/Plater.cpp:3715
msgid "Reload the selected volumes from disk"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1559 src/slic3r/GUI/wxExtensions.cpp:3176
#: src/slic3r/GUI/wxExtensions.cpp:3432
msgid "Change extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1578 src/slic3r/GUI/wxExtensions.cpp:3170
#: src/slic3r/GUI/wxExtensions.cpp:3421 src/libslic3r/PrintConfig.cpp:314
msgid "Default"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1584
msgid "Select new extruder for the object/part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1596
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1596
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1669
msgid "Set as a Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1676
#: src/slic3r/GUI/GUI_ObjectList.cpp:1922
msgid "Add Shape"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1750
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1789
msgid "Error!"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1864
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1893
msgid "Generic"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2011
#: src/slic3r/GUI/GUI_ObjectList.cpp:2113
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2023
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2047
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2063
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2094
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2098
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2117
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2141 src/slic3r/GUI/Plater.cpp:2914
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2145
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2193
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2319
msgid "Group manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2331
msgid "Object manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2344
msgid "Object Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2348
msgid "Part Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2353
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2359
msgid "Part manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2365
msgid "Instance manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2372
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2558
msgid "Delete Selected Item"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2695
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2761
#: src/slic3r/GUI/GUI_ObjectList.cpp:2790
#: src/slic3r/GUI/GUI_ObjectList.cpp:2808
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2867
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3151
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3159
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3277
msgid "Object or Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3278
#: src/slic3r/GUI/GUI_ObjectList.cpp:3411
msgid "Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3278
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3280
msgid "Unsupported selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3281
#, possible-c-format
msgid "You started your selection with %s Item."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3282
#, possible-c-format
msgid "In this mode you can select only other %s Items%s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3285
msgid "of a current Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3406
msgid "You can't change a type of the last solid part of the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3411
msgid "Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3411
msgid "Support Enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3411
msgid "Support Blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3413
msgid "Select type of part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3418
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3663
msgid "Enter new name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3663
msgid "Renaming"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3679
#: src/slic3r/GUI/GUI_ObjectList.cpp:3786 src/slic3r/GUI/Tab.cpp:3405
#: src/slic3r/GUI/Tab.cpp:3409
msgid "The supplied name is not valid;"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3680
#: src/slic3r/GUI/GUI_ObjectList.cpp:3787 src/slic3r/GUI/Tab.cpp:3406
msgid "the following characters are not allowed:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3810
msgid "Set extruder for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3811
msgid "Select extruder number for selected objects and/or parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3824
msgid "Select extruder number:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3825
msgid "This extruder will be set for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3937 src/slic3r/GUI/Selection.cpp:1473
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3937 src/slic3r/GUI/Selection.cpp:1473
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:105
msgid "World coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:106
msgid "Local coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:82
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155
msgid "Object name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:215
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:457
msgid "Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:458
msgid "Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:263
#, possible-c-format
msgid "Toggle %c axis mirroring"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:297
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:337
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:397
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:459
msgid "Scale factors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:516
msgid "Translate"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:750
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:781
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:846
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:875
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:878
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:59
msgid "Additional Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:95
msgid "Remove parameter"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:101
#, possible-c-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
#, possible-c-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:217
msgid "View"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:220 src/slic3r/GUI/GUI_Preview.cpp:577
#: src/libslic3r/GCode/PreviewData.cpp:360
msgid "Feature type"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:221 src/libslic3r/PrintConfig.cpp:489
msgid "Height"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:222 src/libslic3r/PrintConfig.cpp:2215
msgid "Width"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/Tab.cpp:1437
msgid "Fan speed"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:225
msgid "Volumetric flow rate"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:226 src/slic3r/GUI/GUI_Preview.cpp:334
#: src/slic3r/GUI/GUI_Preview.cpp:523 src/slic3r/GUI/GUI_Preview.cpp:576
#: src/slic3r/GUI/GUI_Preview.cpp:772 src/libslic3r/GCode/PreviewData.cpp:372
msgid "Tool"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:227 src/slic3r/GUI/GUI_Preview.cpp:574
#: src/libslic3r/GCode/PreviewData.cpp:374
msgid "Color Print"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:230
msgid "Show"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:233 src/slic3r/GUI/GUI_Preview.cpp:234
msgid "Feature types"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:236 src/libslic3r/ExtrusionEntity.cpp:310
msgid "Perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/ExtrusionEntity.cpp:311
msgid "External perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:312
msgid "Overhang perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:313
msgid "Internal infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:314
#: src/libslic3r/PrintConfig.cpp:1752 src/libslic3r/PrintConfig.cpp:1763
msgid "Solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:315
#: src/libslic3r/PrintConfig.cpp:2094 src/libslic3r/PrintConfig.cpp:2106
msgid "Top solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:316
msgid "Bridge infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:317
#: src/libslic3r/PrintConfig.cpp:907
msgid "Gap fill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:244 src/slic3r/GUI/Tab.cpp:1091
#: src/libslic3r/ExtrusionEntity.cpp:318
msgid "Skirt"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/ExtrusionEntity.cpp:320
#: src/libslic3r/PrintConfig.cpp:1980
msgid "Support material interface"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:247 src/slic3r/GUI/Tab.cpp:1171
#: src/libslic3r/ExtrusionEntity.cpp:321
msgid "Wipe tower"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:252 src/libslic3r/PrintConfig.cpp:2129
msgid "Travel"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:253
msgid "Retractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:254
msgid "Unretractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:255
msgid "Shells"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:256
msgid "Legend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:14 src/slic3r/GUI/MainFrame.cpp:684
msgid "Keyboard Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Load Config from .ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 src/slic3r/GUI/Plater.cpp:858
#: src/slic3r/GUI/Plater.cpp:5142 src/libslic3r/PrintConfig.cpp:3280
msgid "Export G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Save project (3MF)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Load Config from .ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "(Re)slice"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
msgid "Select Plater Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Select Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Select Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Select Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Switch to 3D"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Switch to Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:10
msgid "Preferences"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
#: src/slic3r/GUI/PrintHostDialogs.cpp:136
msgid "Print host upload queue"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
msgid "Camera view"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Add Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Remove Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
msgid "Show keyboard shortcuts list"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
msgid "Press to select multiple object or move multiple object with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
msgid "Main Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Select All objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Delete selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Delete All"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Copy to clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Paste from clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Gizmo rotate"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Gizmo cut"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Gizmo Place face on bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Gizmo SLA support points"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
#, no-c-format
msgid ""
"Press to activate selection rectangle\n"
"or to snap by 5% in Gizmo scale\n"
"or to snap by 1mm in Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid ""
"Press to scale selection to fit print volume\n"
"in Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid ""
"Press to activate deselection rectangle\n"
"or to scale or rotate selected objects\n"
"around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Press to activate one direction scaling in Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Zoom to Bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Zoom to all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Zoom to selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Zoom in"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Zoom out"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Unselect gizmo / Clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
msgid "Plater Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
msgid "Arrow Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
msgid "Upper Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
msgid "Arrow Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
msgid "Lower Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
msgid "Show/Hide (L)egend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:188
msgid "Preview Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
msgid "Move current slider thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
msgid "Move current slider thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Arrow Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Set upper thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Arrow Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Set lower thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Add color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Delete color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Layers Slider Shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:65
msgid ""
" - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/"
"releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:160
msgid "based on Slic3r"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:190
msgid "Plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:401
msgid "&New Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:401
msgid "Start a new project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:404
msgid "&Open Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:404
msgid "Open a project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:409
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:418
msgid "The selected project is no more available"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:418 src/slic3r/GUI/MainFrame.cpp:761
#: src/slic3r/GUI/PrintHostDialogs.cpp:231
msgid "Error"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:442
msgid "&Save Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:442
msgid "Save current project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:446 src/slic3r/GUI/MainFrame.cpp:448
msgid "Save Project &as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:446 src/slic3r/GUI/MainFrame.cpp:448
msgid "Save current project file as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:456
msgid "Import STL/OBJ/AM&F/3MF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:456
msgid "Load a model"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Import &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Load exported configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:462
msgid "Import Config from &project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:462
msgid "Load configuration from project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:465
msgid "Import Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:465
msgid "Load presets from a bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:467
msgid "&Import"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:470 src/slic3r/GUI/MainFrame.cpp:725
msgid "Export &G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:470
msgid "Export current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:474 src/slic3r/GUI/MainFrame.cpp:726
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:474
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:479
msgid "Export plate as &STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:479
msgid "Export current plate as STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:482
msgid "Export plate as STL &including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:482
msgid "Export current plate as STL including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:485
msgid "Export plate as &AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:485
msgid "Export current plate as AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:489
msgid "Export &toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:489
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:493
msgid "Export &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:493
msgid "Export current configuration to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:495
msgid "Export Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:495
msgid "Export all presets to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:497
msgid "&Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:503
msgid "Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:503
msgid "Slice a file into a G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:509
msgid "Quick Slice and Save As"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:509
msgid "Slice a file into a G-code, save as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:515
msgid "Repeat Last Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:515
msgid "Repeat last quick slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:523
msgid "(Re)Slice No&w"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:523
msgid "Start new slicing process"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:527
msgid "&Repair STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:527
msgid "Automatically repair an STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:530
msgid "&Quit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:530
#, possible-c-format
msgid "Quit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:555
msgid "&Select all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:556
msgid "Selects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:558
msgid "D&eselect all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:559
msgid "Deselects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:562
msgid "&Delete selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:563
msgid "Deletes the current selection"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:565
msgid "Delete &all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:566
msgid "Deletes all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:570
msgid "&Undo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:573
msgid "&Redo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:578
msgid "&Copy"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:579
msgid "Copy selection to clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:581
msgid "&Paste"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:582
msgid "Paste clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:591
msgid "&Plater Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:591
msgid "Show the plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:598
msgid "P&rint Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:598
msgid "Show the print settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:600 src/slic3r/GUI/MainFrame.cpp:728
msgid "&Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:600
msgid "Show the filament settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:603
msgid "Print&er Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:603
msgid "Show the printer settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:607
msgid "3&D"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:607
msgid "Show the 3D editing view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:610
msgid "Pre&view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:610
msgid "Show the 3D slices preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Print &Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Display the Print Host Upload Queue window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:638
msgid "Iso"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:638
msgid "Iso View"
msgstr ""

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:642 src/libslic3r/PrintConfig.cpp:2121
msgid "Top"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:642
msgid "Top View"
msgstr ""

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#: src/slic3r/GUI/MainFrame.cpp:645 src/libslic3r/PrintConfig.cpp:164
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:645
msgid "Bottom View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:647
msgid "Front"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:647
msgid "Front View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:649 src/libslic3r/PrintConfig.cpp:1627
msgid "Rear"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:649
msgid "Rear View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:651
msgid "Left"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:651
msgid "Left View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:653
msgid "Right"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:653
msgid "Right View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:660
msgid "Prusa 3D &Drivers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:660
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:662
msgid "Software &Releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:662
msgid "Open the software releases page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:668
#, possible-c-format
msgid "%s &Website"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:669
#, possible-c-format
msgid "Open the %s website in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:675
msgid "System &Info"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:675
msgid "Show system information"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:677
msgid "Show &Configuration Folder"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:677
msgid "Show user configuration folder (datadir)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:679
msgid "Report an I&ssue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:679
#, possible-c-format
msgid "Report an issue on %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:681
#, possible-c-format
msgid "&About %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:681
msgid "Show about dialog"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:684
msgid "Show the list of the keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:688
msgid "DEBUG gcode thumbnails"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:688
msgid ""
"DEBUG ONLY - read the selected gcode file and generates png for the "
"contained thumbnails"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:697
msgid "&File"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:698
msgid "&Edit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:699
msgid "&Window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:700
msgid "&View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:703
msgid "&Help"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:725
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:726
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:728
msgid "Mate&rial Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:749
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:760
msgid "No previously sliced file."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:766
msgid "Previously sliced file ("
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:766
msgid ") not found."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:767
msgid "File Not Found"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:802
#, possible-c-format
msgid "Save %s file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:802
msgid "SVG"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:802
msgid "G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:814
msgid "Save zip file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:823 src/slic3r/GUI/Plater.cpp:3058
#: src/slic3r/GUI/Plater.cpp:4781 src/slic3r/GUI/Tab.cpp:1201
#: src/slic3r/GUI/Tab.cpp:3608
msgid "Slicing"
msgstr ""

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:825
#, possible-c-format
msgid "Processing %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:848
msgid " was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:850
msgid "Slicing Done!"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:865
msgid "Select the STL file to repair:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:875
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:887
msgid "Your file was repaired."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:887 src/libslic3r/PrintConfig.cpp:3374
msgid "Repair"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:901
msgid "Save configuration as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:920 src/slic3r/GUI/MainFrame.cpp:982
msgid "Select configuration to load:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:956
msgid "Save presets bundle as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1003
#, possible-c-format
msgid "%d presets successfully imported."
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:255
msgid "3Dconnexion settings"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:259
msgid "Device:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:266
msgid "Speed:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:270
msgid "Translation##1"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:274
msgid "Rotation##1"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:279
msgid "Deadzone:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:283
msgid "Translation##2"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:287
msgid "Rotation##2"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:73
#, possible-c-format
msgid "%s error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:74
#, possible-c-format
msgid "%s has encountered an error"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:249
msgctxt "Layers"
msgid "Top"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:249
msgctxt "Layers"
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:155
msgid "Volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:156
msgid "Facets"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:157
msgid "Materials"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:160
msgid "Manifold"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:210
msgid "Sliced Info"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:229 src/slic3r/GUI/Plater.cpp:1179
msgid "Used Filament (m)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:230
msgid "Used Filament (mm³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:231
msgid "Used Filament (g)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:232
msgid "Used Material (unit)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:233
msgid "Cost (money)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:234 src/slic3r/GUI/Plater.cpp:1166
#: src/slic3r/GUI/Plater.cpp:1208
msgid "Estimated printing time"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:235
msgid "Number of tool changes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:332
msgid "Click to edit preset"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:487
msgid "Select what kind of support do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:489 src/libslic3r/PrintConfig.cpp:1890
#: src/libslic3r/PrintConfig.cpp:2642
msgid "Support on build plate only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:490 src/slic3r/GUI/Plater.cpp:613
msgid "For support enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:491
msgid "Everywhere"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:523 src/slic3r/GUI/Tab.cpp:1097
msgid "Brim"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:525
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:533
msgid "Purging volumes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:627
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:629
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:630
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:802
msgid "Print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:803 src/slic3r/GUI/Tab.cpp:1405
#: src/slic3r/GUI/Tab.cpp:1406
msgid "Filament"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:804
msgid "SLA print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:805 src/slic3r/GUI/Preset.cpp:1395
msgid "SLA material"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:806
msgid "Printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:856 src/slic3r/GUI/Plater.cpp:5143
msgid "Send to printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:859 src/slic3r/GUI/Plater.cpp:3058
#: src/slic3r/GUI/Plater.cpp:4784
msgid "Slice now"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:999
msgid "Hold Shift to Slice & Export G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1102
#, possible-c-format
msgid "%d (%d shells)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1107
#, possible-c-format
msgid "Auto-repaired (%d errors)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1110
#, possible-c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1120
msgid "Yes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1141
msgid "Used Material (ml)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1144
msgid "object(s)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1144
msgid "supports and pad"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1181 src/slic3r/GUI/Plater.cpp:1196
msgid "objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1181 src/slic3r/GUI/Plater.cpp:1196
msgid "wipe tower"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1194 src/libslic3r/PrintConfig.cpp:749
#: src/libslic3r/PrintConfig.cpp:2478 src/libslic3r/PrintConfig.cpp:2479
msgid "Cost"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1211
msgid "normal mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1215 src/slic3r/GUI/Plater.cpp:1224
#: src/libslic3r/PrintConfig.cpp:572
msgid "Color"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1220
msgid "stealth mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1324
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1328
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1561
msgid "ERROR: not enough resources to execute a new job."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2158
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2277
msgid "Loading"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2287
#, possible-c-format
msgid "Processing input file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2315
msgid ""
"You can't load SLA project if there is at least one multi-part object on the "
"bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2316 src/slic3r/GUI/Tab.cpp:2914
msgid "Please check your object list before preset changing."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2361
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2364 src/slic3r/GUI/Plater.cpp:2417
msgid "Multi-part object detected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2371
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2372
msgid "Detected advanced data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2394
#, possible-c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2414
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2430
msgid "Loaded"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2532
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2533
msgid "Object too large?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2595
msgid "Export STL file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2602
msgid "Export AMF file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2608
msgid "Save file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2614
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2716
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2727
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2765
msgid "Optimize Rotation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2811
msgid "Arranging"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2833
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2839
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2840
msgid "Arranging done."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2856
msgid "Searching for optimal orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2889
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2890
msgid "Orientation found."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2906
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2917
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3043
msgid "Invalid data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3052
msgid "Ready to slice"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3090 src/slic3r/GUI/PrintHostDialogs.cpp:232
msgid "Cancelling"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3107
msgid "Another export job is currently running."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3276
msgid "Fix Throught NetFabb"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3467
msgid "Export failed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3472 src/slic3r/GUI/PrintHostDialogs.cpp:233
msgid "Cancelled"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3712 src/slic3r/GUI/Plater.cpp:3734
msgid "Remove the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3721
msgid "Add one more instance of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3723
msgid "Remove one instance of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3725
msgid "Set number of instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3725
msgid "Change the number of instances of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3744
msgid "Reload the selected object from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3747
msgid "Export the selected object as STL file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3772
msgid "Along X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3772
msgid "Mirror the selected object along the X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3774
msgid "Along Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3774
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3776
msgid "Along Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3776
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3779
msgid "Mirror"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3779
msgid "Mirror the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3791
msgid "To objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3791 src/slic3r/GUI/Plater.cpp:3811
msgid "Split the selected object into individual objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3793
msgid "To parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3793 src/slic3r/GUI/Plater.cpp:3825
msgid "Split the selected object into individual sub-parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3796 src/slic3r/GUI/Plater.cpp:3811
#: src/slic3r/GUI/Plater.cpp:3825 src/libslic3r/PrintConfig.cpp:3398
msgid "Split"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3796
msgid "Split the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3817
msgid "Optimize orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3817
msgid "Optimize the rotation of the object for better print results."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3857
msgid "3D editor view"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3865 src/slic3r/GUI/Tab.cpp:2358
msgid "Preview"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4144
msgid ""
"%1% printer was active at the time the target Undo / Redo snapshot was "
"taken. Switching to %1% printer requires reloading of %1% presets."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4319
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4347
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4351
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4410
msgid "All objects will be removed, continue ?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4418
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4426
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4461
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4497
#, possible-c-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4527
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4559
msgid "Save G-code file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4559
msgid "Save SL1 file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4671
#, possible-c-format
msgid "STL file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4687
#, possible-c-format
msgid "AMF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4690
#, possible-c-format
msgid "Error exporting AMF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4722
#, possible-c-format
msgid "3MF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4727
#, possible-c-format
msgid "Error exporting 3MF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5142
msgid "Export"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5143
msgid "Send G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5227
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:22 src/slic3r/GUI/Tab.cpp:1766
#: src/slic3r/GUI/Tab.cpp:2010
msgid "General"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:44
msgid "Remember output directory"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:46
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:52
msgid "Auto-center parts"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:54
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:60
msgid "Background processing"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:62
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:71
msgid ""
"If enabled, PrusaSlicer will check for the new versions of itself online. "
"When a new version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:79
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:84
msgid "Suppress \" - default - \" presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:86
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:92
msgid "Show incompatible print and filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:94
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:101
msgid "Use Retina resolution for the 3D scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:103
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:110
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:112
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:117
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:119
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:144
#, possible-c-format
msgid "You need to restart %s to make the changes effective."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:192
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:207
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preset.cpp:237
msgid "modified"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1018 src/slic3r/GUI/Preset.cpp:1065
#: src/slic3r/GUI/Preset.cpp:1141 src/slic3r/GUI/Preset.cpp:1175
#: src/slic3r/GUI/PresetBundle.cpp:1583 src/slic3r/GUI/PresetBundle.cpp:1667
msgid "System presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1069 src/slic3r/GUI/Preset.cpp:1179
#: src/slic3r/GUI/PresetBundle.cpp:1672
msgid "User presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1100 src/slic3r/GUI/Tab.cpp:243
msgid "Add a new printer"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1102
msgid "Add/Remove materials"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1393
msgid "filament"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1394
msgid "SLA print"
msgstr ""

#: src/slic3r/GUI/PresetBundle.cpp:1683
msgid "Add/Remove filaments"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:28
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:35
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:39
msgid "During the other layers, fan"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:41
msgid "Fan"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:47
msgid "will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:50
msgid "except for the first %1% layers."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:52
msgid "except for the first layer."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:54
msgid "will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:155
msgid "external perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:164
msgid "perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:173
msgid "infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "top solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:202
msgid "support"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:212
msgid "support interface"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:218
msgid "First layer volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:218
msgid "Bridging volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:218
msgid "Volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "flow rate is maximized"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:222
msgid "by the print profile maximum"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:223
msgid "when printing"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:224
msgid "with a volumetric rate"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:228
#, possible-c-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:246
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:262
#, possible-c-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:268
#, possible-c-format
msgid "%d lines: %.2f mm"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Send G-Code to printer host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Upload to Printer Host with the following filename:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Start printing after upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:149
msgid "ID"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:150
msgid "Progress"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:151
msgid "Status"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:152
msgid "Host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:153
msgid "Filename"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:154
msgid "Error Message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:157
msgid "Cancel selected"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:159
msgid "Show error message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:198
#: src/slic3r/GUI/PrintHostDialogs.cpp:229
msgid "Enqueued"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:230
msgid "Uploading"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:234
msgid "Completed"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:272
msgid "Error uploading to print host:"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
#: src/libslic3r/PrintConfig.cpp:634 src/libslic3r/PrintConfig.cpp:678
#: src/libslic3r/PrintConfig.cpp:693 src/libslic3r/PrintConfig.cpp:2385
#: src/libslic3r/PrintConfig.cpp:2394 src/libslic3r/PrintConfig.cpp:2495
#: src/libslic3r/PrintConfig.cpp:2503 src/libslic3r/PrintConfig.cpp:2511
#: src/libslic3r/PrintConfig.cpp:2518 src/libslic3r/PrintConfig.cpp:2526
#: src/libslic3r/PrintConfig.cpp:2534
msgid "s"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:591
#: src/libslic3r/PrintConfig.cpp:1247
msgid "mm³/s"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:146
msgid "Selection-Add"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:187
msgid "Selection-Remove"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:219
msgid "Selection-Add Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:238
msgid "Selection-Remove Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:256
msgid "Selection-Add Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:275
msgid "Selection-Remove Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:376
msgid "Selection-Add All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:402
msgid "Selection-Remove All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:939
msgid "Scale To Fit"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1474
msgid "Set Printable Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1474
msgid "Set Unprintable Instance"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:78
msgid "System Information"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:154
msgid "Copy to Clipboard"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:52 src/libslic3r/PrintConfig.cpp:244
msgid "Compatible printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:53
msgid "Select the printers this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:58 src/libslic3r/PrintConfig.cpp:259
msgid "Compatible print profiles"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:59
msgid "Select the print profiles this profile is compatible with."
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:135
#, possible-c-format
msgid "Save current %s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:136
msgid "Delete this preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:141
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:943
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:945
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:947
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:950
#, possible-c-format
msgid ""
"Current preset is inherited from:\n"
"\t%s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:954
msgid "It can't be deleted or modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:955
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:956
msgid "To do that please specify a new name for the preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:960
msgid "Additional information:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:966
msgid "printer model"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:974
msgid "default print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:977
msgid "default filament profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:991
msgid "default SLA material profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:995
msgid "default SLA print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1003
msgid "full profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1004
msgid "symbolic profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1038 src/slic3r/GUI/Tab.cpp:3551
msgid "Layers and perimeters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1043
msgid "Vertical shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1054
msgid "Horizontal shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1055 src/libslic3r/PrintConfig.cpp:1776
msgid "Solid layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1060
msgid "Quality (slower slicing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1078
msgid "Reducing printing time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1090
msgid "Skirt and brim"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1107
msgid "Raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1111
msgid "Options for support material and raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1126
msgid "Speed for print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1138
msgid "Speed for non-print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1141
msgid "Modifiers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1144
msgid "Acceleration control (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1151
msgid "Autospeed (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1159
msgid "Multiple Extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1167
msgid "Ooze prevention"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1185
msgid "Extrusion width"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1195
msgid "Overlap"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1198
msgid "Flow"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1207
msgid "Other"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1210 src/slic3r/GUI/Tab.cpp:3611
msgid "Output options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1211
msgid "Sequential printing"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1213
msgid "Extruder clearance (mm)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1222 src/slic3r/GUI/Tab.cpp:3612
msgid "Output file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1229 src/libslic3r/PrintConfig.cpp:1448
msgid "Post-processing scripts"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1235 src/slic3r/GUI/Tab.cpp:1236
#: src/slic3r/GUI/Tab.cpp:1517 src/slic3r/GUI/Tab.cpp:1518
#: src/slic3r/GUI/Tab.cpp:1982 src/slic3r/GUI/Tab.cpp:1983
#: src/slic3r/GUI/Tab.cpp:2096 src/slic3r/GUI/Tab.cpp:2097
#: src/slic3r/GUI/Tab.cpp:3488 src/slic3r/GUI/Tab.cpp:3489
msgid "Notes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1242 src/slic3r/GUI/Tab.cpp:1525
#: src/slic3r/GUI/Tab.cpp:1989 src/slic3r/GUI/Tab.cpp:2103
#: src/slic3r/GUI/Tab.cpp:3496 src/slic3r/GUI/Tab.cpp:3617
msgid "Dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1243 src/slic3r/GUI/Tab.cpp:1526
#: src/slic3r/GUI/Tab.cpp:1990 src/slic3r/GUI/Tab.cpp:2104
#: src/slic3r/GUI/Tab.cpp:3497 src/slic3r/GUI/Tab.cpp:3618
msgid "Profile dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1303 src/slic3r/GUI/Tab.cpp:1358
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1304 src/slic3r/GUI/Tab.cpp:1363
#: src/slic3r/GUI/Tab.cpp:2338
msgid "Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1413 src/libslic3r/PrintConfig.cpp:2056
msgid "Temperature"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1419
msgid "Bed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1424
msgid "Cooling"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1425 src/libslic3r/PrintConfig.cpp:1350
#: src/libslic3r/PrintConfig.cpp:2177
msgid "Enable"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1436
msgid "Fan settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1445
msgid "Cooling thresholds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1451
msgid "Filament properties"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1455
msgid "Print speed override"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1465
msgid "Wipe tower parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1468
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1482
msgid "Ramming settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1504 src/slic3r/GUI/Tab.cpp:1945
msgid "Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1505 src/slic3r/GUI/Tab.cpp:1946
#: src/libslic3r/PrintConfig.cpp:1802 src/libslic3r/PrintConfig.cpp:1817
msgid "Start G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1511 src/slic3r/GUI/Tab.cpp:1952
#: src/libslic3r/PrintConfig.cpp:374 src/libslic3r/PrintConfig.cpp:384
msgid "End G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1568
msgid "Volumetric flow hints not available"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1654 src/slic3r/GUI/Tab.cpp:1885
msgid "Test"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1664
msgid "Could not get a valid Printer Host reference"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1670 src/slic3r/GUI/Tab.cpp:1898
msgid "Success!"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1685
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1698
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1699
msgid "Open CA certificate file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1727
#, possible-c-format
msgid ""
"HTTPS CA File:\n"
"    \tOn this system, %s uses HTTPS certificates from the system Certificate "
"Store or Keychain.\n"
"    \tTo use a custom CA file, please import your CA file into Certificate "
"Store / Keychain."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1767 src/slic3r/GUI/Tab.cpp:2011
msgid "Size and coordinates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1772 src/slic3r/GUI/Tab.cpp:2016
#: src/slic3r/GUI/Tab.cpp:3125
msgid "Set"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1804
msgid "Capabilities"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1809
msgid "Number of extruders of the printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1837
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1840 src/slic3r/GUI/Tab.cpp:2308
#: src/libslic3r/PrintConfig.cpp:1323
msgid "Nozzle diameter"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1870
msgid "USB/Serial connection"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1871 src/libslic3r/PrintConfig.cpp:1656
msgid "Serial port"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1876
msgid "Rescan serial ports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1898
msgid "Connection to printer works correctly."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1901
msgid "Connection failed."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1914 src/slic3r/GUI/Tab.cpp:2091
msgid "Print Host upload"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1958 src/libslic3r/PrintConfig.cpp:143
msgid "Before layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1964 src/libslic3r/PrintConfig.cpp:1069
msgid "After layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1970 src/libslic3r/PrintConfig.cpp:2082
msgid "Tool change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1976
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2048
msgid "Display"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2063
msgid "Tilt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2064
msgid "Tilt time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2070 src/slic3r/GUI/Tab.cpp:3470
msgid "Corrections"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2085 src/slic3r/GUI/Tab.cpp:3466
msgid "Exposure"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2156 src/slic3r/GUI/Tab.cpp:2241
#: src/libslic3r/PrintConfig.cpp:1119 src/libslic3r/PrintConfig.cpp:1137
#: src/libslic3r/PrintConfig.cpp:1155 src/libslic3r/PrintConfig.cpp:1172
#: src/libslic3r/PrintConfig.cpp:1183 src/libslic3r/PrintConfig.cpp:1194
#: src/libslic3r/PrintConfig.cpp:1205
msgid "Machine limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2170
msgid "Values in this column are for Normal mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2171
msgid "Normal"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2176
msgid "Values in this column are for Stealth mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2177
msgid "Stealth"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2185
msgid "Maximum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2190
msgid "Maximum accelerations"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2197
msgid "Jerk limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2202
msgid "Minimum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2266 src/slic3r/GUI/Tab.cpp:2274
msgid "Single extruder MM setup"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2275
msgid "Single extruder multimaterial parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2306
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2330
msgid "Layer height limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2335
msgid "Position (for multi-extruder printers)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2341
msgid "Only lift Z"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2354
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2362
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2543
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2545
msgid "Firmware Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2874
#, possible-c-format
msgid "Default preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2875
#, possible-c-format
msgid "Preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2892
msgid "has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2895
msgid "is not compatible with printer"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2896
msgid "is not compatible with print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2898
msgid "and it has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2902
msgid "Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2994
msgctxt "PresetName"
msgid "%1% - Copy"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3017
msgid "The supplied name is empty. It can't be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3022
msgid "Cannot overwrite a system profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3026
msgid "Cannot overwrite an external profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3031
msgid "Preset with name \"%1%\" already exist."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3032
msgid "Replace?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3070
msgid "remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3070
msgid "delete"
msgstr ""

#. TRN  remove/delete
#: src/slic3r/GUI/Tab.cpp:3072
msgid "Are you sure you want to %1% the selected preset?"
msgstr ""

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3075
msgid "%1% Preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3201
msgid "LOCKED LOCK"
msgstr ""

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3203
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3205
msgid "UNLOCKED LOCK"
msgstr ""

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3207
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3212
msgid "WHITE BULLET"
msgstr ""

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3214
msgid ""
"for the left button: \tindicates a non-system (or non-default) preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3217
msgid "BACK ARROW"
msgstr ""

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3219
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3229
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3231
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3234
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3237
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3239
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3245
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3246
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3252
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3253
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#. TRN Preset
#: src/slic3r/GUI/Tab.cpp:3366
#, possible-c-format
msgid "Save %s as:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3410
msgid "the following suffix is not allowed:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3414
msgid "The supplied name is not available."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3427 src/slic3r/GUI/Tab.cpp:3429
msgid "Material"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3463 src/slic3r/GUI/Tab.cpp:3553
#: src/slic3r/GUI/wxExtensions.cpp:601
msgid "Layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3561
msgid "Support head"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3566
msgid "Support pillar"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3580
msgid "Connection of the support sticks and junctions"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3585
msgid "Automatic generation"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:327 src/slic3r/GUI/Tab.hpp:427
msgid "Print Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:352
msgid "Filament Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:388
msgid "Printer Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:412
msgid "Material Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:439
msgid "Save preset"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
msgid "Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
#, possible-c-format
msgid "New version of %s is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:43
msgid "Current version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "New version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:53
msgid "Changelog && Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125
msgid "Open changelog page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:65
msgid "Open download page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:71
msgid "Don't notify about new releases any more"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:205
msgid "Configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89
msgid "Configuration update is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:92
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:113
msgid "Comment:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:149
#, possible-c-format
msgid "%s incompatibility"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:150
#, possible-c-format
msgid "%s configuration is incompatible"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:155
#, possible-c-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:164
#, possible-c-format
msgid "This %s version: %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:169
msgid "Incompatible bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:185
#, possible-c-format
msgid "Exit %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:188
msgid "Re-configure"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:209
#, possible-c-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:225
msgid "For more information please visit our wiki page:"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:15
msgid "Ramming customization"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:41
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:83
msgid "Total ramming time"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:85
msgid "Total rammed volume"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:89
msgid "Ramming line width"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:91
msgid "Ramming line spacing"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:142
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:254
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:255
msgid "Extruder changed to"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:263
msgid "unloaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:264
msgid "loaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:276
msgid "Tool #"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:285
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:286
msgid "Volume to purge (mm³) when the filament is being"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "From"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:365
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show simplified settings"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show advanced settings"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:590
msgid "Instances"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:594 src/slic3r/GUI/wxExtensions.cpp:750
#, possible-c-format
msgid "Instance %d"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:628
msgid "Range"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:2325
msgid "Place bearings in slots and resume"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3075
msgid "One layer mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3078
msgid "Discard all custom changes"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3080
msgid "Set extruder sequence for whole print"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3086
msgid "For add color change use left mouse button click"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3087
msgid "For add change extruder use left mouse button click"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3088
msgid "For add another code use right mouse button click"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3090
msgid ""
"For Delete color change use left mouse button click\n"
"For Edit color use right mouse button click"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3092
msgid "Delete color change for Extruder %1%"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3095
msgid "Delete extruder change to \"%1%\""
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3096
msgid ""
"For Delete \"%1%\" code use left mouse button click\n"
"For Edit \"%1%\" code use right mouse button click"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3176 src/slic3r/GUI/wxExtensions.cpp:3432
msgid "Use another extruder"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3435
msgid "Add color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3441
msgid "Add color change"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3444
msgid "Add pause print"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3447
msgid "Add custom G-code"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3460
msgid "Edit color"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3461
msgid "Edit pause print message"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3462
msgid "Edit custom G-code"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3465
msgid "Delete color change"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3466
msgid "Delete pause print"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3467
msgid "Delete custom G-code"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3499
msgid "Enter custom G-code used on current layer"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3500
msgid "Custom Gcode on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3513
msgid "Enter short message shown on Printer display during pause print"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3514
msgid "Message for pause print on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3774
#, possible-c-format
msgid "Switch to the %s mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:3775
#, possible-c-format
msgid "Current mode is %s"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
msgid "Set extruder sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39
msgid "Set extruder change for every"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52
#: src/libslic3r/PrintConfig.cpp:341 src/libslic3r/PrintConfig.cpp:983
#: src/libslic3r/PrintConfig.cpp:1500 src/libslic3r/PrintConfig.cpp:1685
#: src/libslic3r/PrintConfig.cpp:1746 src/libslic3r/PrintConfig.cpp:1919
#: src/libslic3r/PrintConfig.cpp:1965
msgid "layers"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136
msgid "Set extruder(tool) sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
msgid "Remove extruder from sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192
msgid "Add extruder to sequence"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:51
msgid "Connection to Duet works correctly."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:56
msgid "Could not connect to Duet"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154
#: src/slic3r/Utils/FlashAir.cpp:115 src/slic3r/Utils/FlashAir.cpp:132
msgid "Unknown error occured"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:148
msgid "Wrong password"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:151
msgid "Could not get resources to create a new connection"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:70
#, possible-c-format
msgid "Mismatched type of print host: %s"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:85
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:91
msgid "Could not connect to OctoPrint"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:91
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:196
msgid "Connection to Prusa SL1 works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:201
msgid "Could not connect to Prusa SLA"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:60
msgid "Upload not enabled on FlashAir card."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:70
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:75
msgid "Could not connect to FlashAir"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:75
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:624
#, possible-c-format
msgid "requires min. %s and max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:629
#, possible-c-format
msgid "requires min. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:631
#, possible-c-format
msgid "requires max. %s"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Loading repaired model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model..."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:368
msgid "Export of a temporary 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:383
msgid "Import of the repaired 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Repaired 3MF file does not contain any object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:387
msgid "Repaired 3MF file contains more than one object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:389
msgid "Repaired 3MF file does not contain any volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:391
msgid "Repaired 3MF file contains more than one volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Model repair finished"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:406
msgid "Model repair canceled"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:423
msgid "Model repaired successfully"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:423
#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model Repair by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model repair failed:"
msgstr ""

#: src/libslic3r/SLA/SLAPad.cpp:690
msgid "Pad brim size is too small for the current configuration."
msgstr ""

#: src/libslic3r/Zipper.cpp:32
msgid "undefined error"
msgstr ""

#: src/libslic3r/Zipper.cpp:34
msgid "too many files"
msgstr ""

#: src/libslic3r/Zipper.cpp:36
msgid "file too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:38
msgid "unsupported method"
msgstr ""

#: src/libslic3r/Zipper.cpp:40
msgid "unsupported encryption"
msgstr ""

#: src/libslic3r/Zipper.cpp:42
msgid "unsupported feature"
msgstr ""

#: src/libslic3r/Zipper.cpp:44
msgid "failed finding central directory"
msgstr ""

#: src/libslic3r/Zipper.cpp:46
msgid "not a ZIP archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:48
msgid "invalid header or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:50
msgid "unsupported multidisk archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:52
msgid "decompression failed or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:54
msgid "compression failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:56
msgid "unexpected decompressed size"
msgstr ""

#: src/libslic3r/Zipper.cpp:58
msgid "CRC-32 check failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:60
msgid "unsupported central directory size"
msgstr ""

#: src/libslic3r/Zipper.cpp:62
msgid "allocation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:64
msgid "file open failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:66
msgid "file create failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:68
msgid "file write failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:70
msgid "file read failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:72
msgid "file close failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:74
msgid "file seek failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:76
msgid "file stat failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:78
msgid "invalid parameter"
msgstr ""

#: src/libslic3r/Zipper.cpp:80
msgid "invalid filename"
msgstr ""

#: src/libslic3r/Zipper.cpp:82
msgid "buffer too small"
msgstr ""

#: src/libslic3r/Zipper.cpp:84
msgid "internal error"
msgstr ""

#: src/libslic3r/Zipper.cpp:86
msgid "file not found"
msgstr ""

#: src/libslic3r/Zipper.cpp:88
msgid "archive is too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:90
msgid "validation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:92
msgid "write calledback failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:102
msgid "Error with zip archive"
msgstr ""

#: src/libslic3r/GCode.cpp:628
msgid "Empty layers detected, the output would not be printable."
msgstr ""

#: src/libslic3r/GCode.cpp:629
msgid "Object name: "
msgstr ""

#: src/libslic3r/GCode.cpp:629
msgid "Print z: "
msgstr ""

#: src/libslic3r/GCode.cpp:630
msgid ""
"This is usually caused by negligibly small extrusions or by a faulty model. "
"Try to repair  the model or change its orientation on the bed."
msgstr ""

#: src/libslic3r/ExtrusionEntity.cpp:323
msgid "Mixed"
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1517
msgid "The selected 3mf file has been saved with a newer version of "
msgstr ""

#: src/libslic3r/Format/AMF.cpp:915
msgid "The selected amf file has been saved with a newer version of "
msgstr ""

#: src/libslic3r/Print.cpp:1168
msgid "All objects are outside of the print volume."
msgstr ""

#: src/libslic3r/Print.cpp:1171
msgid "The supplied settings will cause an empty print."
msgstr ""

#: src/libslic3r/Print.cpp:1198
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""

#: src/libslic3r/Print.cpp:1213
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""

#: src/libslic3r/Print.cpp:1223
msgid "The Spiral Vase option can only be used when printing a single object."
msgstr ""

#: src/libslic3r/Print.cpp:1230
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""

#: src/libslic3r/Print.cpp:1243
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1248
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:1250
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""

#: src/libslic3r/Print.cpp:1252
msgid "Ooze prevention is currently not supported with the wipe tower enabled."
msgstr ""

#: src/libslic3r/Print.cpp:1254
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""

#: src/libslic3r/Print.cpp:1275
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""

#: src/libslic3r/Print.cpp:1277
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""

#: src/libslic3r/Print.cpp:1279
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""

#: src/libslic3r/Print.cpp:1281
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""

#: src/libslic3r/Print.cpp:1323
msgid ""
"The Wipe tower is only supported if all objects have the same layer height "
"profile"
msgstr ""

#: src/libslic3r/Print.cpp:1349
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""

#: src/libslic3r/Print.cpp:1358
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1361
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1372
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1380
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""

#: src/libslic3r/Print.cpp:1384
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""

#: src/libslic3r/Print.cpp:1406
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1411
msgid "Layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1566
msgid "Infilling layers"
msgstr ""

#: src/libslic3r/Print.cpp:1582
msgid "Generating skirt"
msgstr ""

#: src/libslic3r/Print.cpp:1590
msgid "Generating brim"
msgstr ""

#: src/libslic3r/Print.cpp:1614
msgid "Exporting G-code"
msgstr ""

#: src/libslic3r/Print.cpp:1618
msgid "Generating G-code"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:66
msgid "Slicing model"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:67 src/libslic3r/SLAPrint.cpp:905
msgid "Generating support points"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:68
msgid "Generating support tree"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:69
msgid "Generating pad"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:70
msgid "Slicing supports"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:87
msgid "Merging slices and calculating statistics"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:88
msgid "Rasterizing layers"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:670
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:682
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:688
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:703
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:710
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:794
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:964 src/libslic3r/SLAPrint.cpp:973
#: src/libslic3r/SLAPrint.cpp:1018
msgid "Visualizing supports"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:1009
msgid "No pad can be generated for this model with the current configuration"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:1554
msgid "Slicing done"
msgstr ""

#: src/libslic3r/PrintBase.cpp:71
msgid "Failed processing of the output_filename_format template."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
msgid "Printer technology"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:51
msgid "Bed shape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:56
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:61
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:66
msgid "Picture sizes to be stored into a .gcode and .sl1 files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:73
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:80
msgid "Max print height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:81
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:87
msgid "Slice gap closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:89
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:97
msgid "Hostname, IP or URL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:98
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:104
msgid "API Key / Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:105
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:111
msgid "HTTPS CA File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:112
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:126
msgid "Avoid crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:127
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:134 src/libslic3r/PrintConfig.cpp:2053
msgid "Other layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:135
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:137
msgid "Bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:144
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:154
msgid "Between objects G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:155
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:166
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:167
msgid "Bottom solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:172
msgid "Bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:173
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:175 src/libslic3r/PrintConfig.cpp:318
#: src/libslic3r/PrintConfig.cpp:851 src/libslic3r/PrintConfig.cpp:973
#: src/libslic3r/PrintConfig.cpp:1143 src/libslic3r/PrintConfig.cpp:1196
#: src/libslic3r/PrintConfig.cpp:1207 src/libslic3r/PrintConfig.cpp:1398
msgid "mm/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:181
msgid "Bridging angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:183
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:186 src/libslic3r/PrintConfig.cpp:769
#: src/libslic3r/PrintConfig.cpp:1635 src/libslic3r/PrintConfig.cpp:1645
#: src/libslic3r/PrintConfig.cpp:1883 src/libslic3r/PrintConfig.cpp:2038
#: src/libslic3r/PrintConfig.cpp:2224 src/libslic3r/PrintConfig.cpp:2695
#: src/libslic3r/PrintConfig.cpp:2816
msgid "°"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:192
msgid "Bridges fan speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:193
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:194 src/libslic3r/PrintConfig.cpp:781
#: src/libslic3r/PrintConfig.cpp:1216 src/libslic3r/PrintConfig.cpp:1279
#: src/libslic3r/PrintConfig.cpp:1527 src/libslic3r/PrintConfig.cpp:2402
#: src/libslic3r/PrintConfig.cpp:2735
msgid "%"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:201
msgid "Bridge flow ratio"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:203
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:213
msgid "Bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:215
msgid "Speed for printing bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:216 src/libslic3r/PrintConfig.cpp:599
#: src/libslic3r/PrintConfig.cpp:607 src/libslic3r/PrintConfig.cpp:616
#: src/libslic3r/PrintConfig.cpp:624 src/libslic3r/PrintConfig.cpp:651
#: src/libslic3r/PrintConfig.cpp:670 src/libslic3r/PrintConfig.cpp:911
#: src/libslic3r/PrintConfig.cpp:1039 src/libslic3r/PrintConfig.cpp:1125
#: src/libslic3r/PrintConfig.cpp:1161 src/libslic3r/PrintConfig.cpp:1174
#: src/libslic3r/PrintConfig.cpp:1185 src/libslic3r/PrintConfig.cpp:1238
#: src/libslic3r/PrintConfig.cpp:1297 src/libslic3r/PrintConfig.cpp:1428
#: src/libslic3r/PrintConfig.cpp:1602 src/libslic3r/PrintConfig.cpp:1611
#: src/libslic3r/PrintConfig.cpp:2017 src/libslic3r/PrintConfig.cpp:2131
msgid "mm/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:223
msgid "Brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:224
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:231
msgid "Clip multi-part objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:232
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:239
msgid "Colorprint height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:240
msgid "Heights at which a filament change is to occur."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:250
msgid "Compatible printers condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:251
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:265
msgid "Compatible print profiles condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:266
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:283
msgid "Complete individual objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:284
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:292
msgid "Enable auto cooling"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:293
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:298
msgid "Cooling tube position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:299
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:306
msgid "Cooling tube length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:307
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:315
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:324
msgid "Default filament profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:325
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:331
msgid "Default print profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:332 src/libslic3r/PrintConfig.cpp:2560
#: src/libslic3r/PrintConfig.cpp:2571
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:338
msgid "Disable fan for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:339
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:348
msgid "Don't support bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:350
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:356
msgid "Distance between copies"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:357
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:364
msgid "Elephant foot compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:366
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:375
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:385
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:396
msgid "Ensure vertical shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:398
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:404
msgid "Top fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:406
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:414 src/libslic3r/PrintConfig.cpp:832
#: src/libslic3r/PrintConfig.cpp:1998
msgid "Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:415 src/libslic3r/PrintConfig.cpp:838
msgid "Concentric"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:416 src/libslic3r/PrintConfig.cpp:842
msgid "Hilbert Curve"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:417 src/libslic3r/PrintConfig.cpp:843
msgid "Archimedean Chords"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:418 src/libslic3r/PrintConfig.cpp:844
msgid "Octagram Spiral"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:424
msgid "Bottom fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:426
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:435 src/libslic3r/PrintConfig.cpp:446
msgid "External perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:437
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:440 src/libslic3r/PrintConfig.cpp:549
#: src/libslic3r/PrintConfig.cpp:871 src/libslic3r/PrintConfig.cpp:884
#: src/libslic3r/PrintConfig.cpp:1004 src/libslic3r/PrintConfig.cpp:1030
#: src/libslic3r/PrintConfig.cpp:1418 src/libslic3r/PrintConfig.cpp:1757
#: src/libslic3r/PrintConfig.cpp:1872 src/libslic3r/PrintConfig.cpp:1940
#: src/libslic3r/PrintConfig.cpp:2100
msgid "mm or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:448
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:893
#: src/libslic3r/PrintConfig.cpp:1716 src/libslic3r/PrintConfig.cpp:1768
#: src/libslic3r/PrintConfig.cpp:1984 src/libslic3r/PrintConfig.cpp:2113
msgid "mm/s or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:458
msgid "External perimeters first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:460
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:466
msgid "Extra perimeters if needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:468
#, no-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:478
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:490
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:501
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:511
msgid "Extruder Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:512 src/libslic3r/PrintConfig.cpp:573
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:518
msgid "Extruder offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:519
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:528
msgid "Extrusion axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:529
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:534
msgid "Extrusion multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:535
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:543
msgid "Default extrusion width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:545
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:555
msgid "Keep fan always on"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:556
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:561
msgid "Enable fan if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:562
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:564 src/libslic3r/PrintConfig.cpp:1703
msgid "approximate seconds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:578
msgid "Filament notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:579
msgid "You can put your notes regarding the filament here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:587 src/libslic3r/PrintConfig.cpp:1244
msgid "Max volumetric speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:588
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:597
msgid "Loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:598
msgid "Speed used for loading the filament on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:605
msgid "Loading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:606
msgid "Speed used at the very beginning of loading phase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:613
msgid "Unloading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:614
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:622
msgid "Unloading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:623
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:630
msgid "Delay after unloading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:631
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:640
msgid "Number of cooling moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:641
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:649
msgid "Speed of the first cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:650
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:657
msgid "Minimal purge on wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:658
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:662
msgid "mm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:668
msgid "Speed of the last cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:669
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:676
msgid "Filament load time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:677
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:684
msgid "Ramming parameters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:685
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:691
msgid "Filament unload time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:692
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:700
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:707 src/libslic3r/PrintConfig.cpp:2471
#: src/libslic3r/PrintConfig.cpp:2472
msgid "Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:708
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:711
msgid "g/cm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:716
msgid "Filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:717
msgid "The filament material type for use in custom G-codes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:743
msgid "Soluble material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:744
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:750
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:751
msgid "money/kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:760 src/libslic3r/PrintConfig.cpp:2555
msgid "(Unknown)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:764
msgid "Fill angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:766
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:778
msgid "Fill density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:780
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:815
msgid "Fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:817
msgid "Fill pattern for general low-density infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:833
msgid "Grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:834
msgid "Triangles"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:835
msgid "Stars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:836
msgid "Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:837
msgid "Line"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:839 src/libslic3r/PrintConfig.cpp:2000
msgid "Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:840
msgid "3D Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:841
msgid "Gyroid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:848 src/libslic3r/PrintConfig.cpp:857
#: src/libslic3r/PrintConfig.cpp:865 src/libslic3r/PrintConfig.cpp:899
msgid "First layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:849
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:858
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:867
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:880
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:889
msgid "First layer speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:890
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:900
msgid ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:909
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:917
msgid "Verbose G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:918
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:925
msgid "G-code flavor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:926
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:949
msgid "No extrusion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:954
msgid "Label objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:955
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:962
msgid "High extruder current on filament swap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:963
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:971
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:979
msgid "Combine infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:981
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:984
msgid "Combine infill every n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:990
msgid "Infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:992
msgid "The extruder to use when printing infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1000
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1010
msgid "Infill before perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1011
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1016
msgid "Only infill where needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1018
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1025
msgid "Infill/perimeters overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1027
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1038
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1046
msgid "Inherits profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1047
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1060
msgid "Interface shells"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1061
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1070
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1081
msgid "Supports remaining times"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1082
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1090
msgid "Supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1091
msgid "The firmware supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1115
msgid "Maximum feedrate X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1116
msgid "Maximum feedrate Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1117
msgid "Maximum feedrate Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1118
msgid "Maximum feedrate E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1121
msgid "Maximum feedrate of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1122
msgid "Maximum feedrate of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1123
msgid "Maximum feedrate of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1124
msgid "Maximum feedrate of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1133
msgid "Maximum acceleration X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1134
msgid "Maximum acceleration Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1135
msgid "Maximum acceleration Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1136
msgid "Maximum acceleration E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1139
msgid "Maximum acceleration of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1140
msgid "Maximum acceleration of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1141
msgid "Maximum acceleration of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1142
msgid "Maximum acceleration of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1151
msgid "Maximum jerk X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1152
msgid "Maximum jerk Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1153
msgid "Maximum jerk Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1154
msgid "Maximum jerk E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1157
msgid "Maximum jerk of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1158
msgid "Maximum jerk of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1159
msgid "Maximum jerk of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1160
msgid "Maximum jerk of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1171
msgid "Minimum feedrate when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1173
msgid "Minimum feedrate when extruding (M205 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1182
msgid "Minimum travel feedrate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1184
msgid "Minimum travel feedrate (M205 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1193
msgid "Maximum acceleration when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1195
msgid "Maximum acceleration when extruding (M204 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1204
msgid "Maximum acceleration when retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1206
msgid "Maximum acceleration when retracting (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1214 src/libslic3r/PrintConfig.cpp:1223
msgid "Max"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1215
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1224
#, no-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1234
msgid "Max print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1235
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1245
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1254
msgid "Max volumetric slope positive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1255 src/libslic3r/PrintConfig.cpp:1266
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1259 src/libslic3r/PrintConfig.cpp:1270
msgid "mm³/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1265
msgid "Max volumetric slope negative"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1277 src/libslic3r/PrintConfig.cpp:1286
msgid "Min"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1278
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1287
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1295
msgid "Min print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1296
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1303
msgid "Minimal filament extrusion length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1304
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1313
msgid "Configuration notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1314
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1324
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1329
msgid "Host Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1330
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1343
msgid "Only retract when crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1344
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1351
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1358
msgid "Output filename format"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1359
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1368
msgid "Detect bridging perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1370
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1376
msgid "Filament parking position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1377
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1385
msgid "Extra loading distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1386
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1394 src/libslic3r/PrintConfig.cpp:1412
#: src/libslic3r/PrintConfig.cpp:1425 src/libslic3r/PrintConfig.cpp:1435
msgid "Perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1395
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1403
msgid "Perimeter extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1405
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1414
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1427
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1437
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1441
msgid "(minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1449
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1461
msgid "Printer type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1462
msgid "Type of the printer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1467
msgid "Printer notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1468
msgid "You can put your notes regarding the printer here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1476
msgid "Printer vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1477
msgid "Name of the printer vendor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1482
msgid "Printer variant"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1483
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1496
msgid "Raft layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1498
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1506
msgid "Resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1507
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1517
msgid "Minimum travel after retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1518
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1524
msgid "Retract amount before wipe"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1525
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1532
msgid "Retract on layer change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1533
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1538 src/libslic3r/PrintConfig.cpp:1546
msgid "Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1539
msgid "Retraction Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1540
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1542 src/libslic3r/PrintConfig.cpp:1551
msgid "mm (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1547
msgid "Retraction Length (Toolchange)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1548
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1556
msgid "Lift Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1557
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1564
msgid "Above Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1565
msgid "Only lift Z above"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1566
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1573
msgid "Below Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1574
msgid "Only lift Z below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1575
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1591
msgid "Extra length on restart"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1584
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1592
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1599 src/libslic3r/PrintConfig.cpp:1600
msgid "Retraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1601
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1608
msgid "Deretraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1609
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1616
msgid "Seam position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1618
msgid "Position of perimeters starting points."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1624
msgid "Random"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1625
msgid "Nearest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1626
msgid "Aligned"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1634
msgid "Direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1636
msgid "Preferred direction of the seam"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1637
msgid "Seam preferred direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1644
msgid "Jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1646
msgid "Seam preferred direction jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1647
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1657
msgid "USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1664
msgid "Serial port speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1665
msgid "Speed (baud) of USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1674
msgid "Distance from object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1675
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1682
msgid "Skirt height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1683
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1690
msgid "Loops (minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1691
msgid "Skirt Loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1692
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1700
msgid "Slow down if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1701
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1711
msgid "Small perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1713
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1723
msgid "Solid infill threshold area"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1725
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1726
msgid "mm²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1732
msgid "Solid infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1734
msgid "The extruder to use when printing solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1740
msgid "Solid infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1742
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1754
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1765
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1777
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1783
msgid "Spiral vase"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1784
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1792
msgid "Temperature variation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1793
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1803
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1818
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1834
msgid "Single Extruder Multi Material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1835
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1840
msgid "Prime all printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1841
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1846
msgid "No sparse layers (EXPERIMENTAL)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1847
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1854
msgid "Generate support material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1856
msgid "Enable support material generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1860
msgid "Auto generated supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1862
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1868
msgid "XY separation between an object and its support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1870
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1880
msgid "Pattern angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1882
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1892 src/libslic3r/PrintConfig.cpp:2644
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1898
msgid "Contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1900
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1907
msgid "0 (soluble)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1908
msgid "0.2 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1913
msgid "Enforce support for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1915
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1920
msgid "Enforce support for the first n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1926
msgid "Support material/raft/skirt extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1928
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1937
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1946
msgid "Interface loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1948
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1953
msgid "Support material/raft interface extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1955
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1962
msgid "Interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1964
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1971
msgid "Interface pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1973
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1982
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1991
msgid "Pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1993
msgid "Pattern used to generate support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1999
msgid "Rectilinear grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2005
msgid "Pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2007
msgid "Spacing between support material lines."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2016
msgid "Speed for printing support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2023
msgid "Synchronize with object layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2025
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2031
msgid "Overhang threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2033
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2045
msgid "With sheath around the support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2047
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2054
msgid ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2062
msgid "Detect thin walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2064
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2070
msgid "Threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2071
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2083
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {previous_extruder} and "
"{next_extruder} can be used. When a tool-changing command which changes to "
"the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2096
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2108
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2123
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2124
msgid "Top solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2130
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2138
msgid "Use firmware retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2139
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2145
msgid "Use relative E distances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2146
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2152
msgid "Use volumetric E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2153
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2163
msgid "Enable variable layer height feature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2164
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2170
msgid "Wipe while retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2171
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2178
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2184
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2185
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2191
msgid "Purging volumes - matrix"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2192
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2201
msgid "Position X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2202
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2208
msgid "Position Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2209
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2216
msgid "Width of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2222
msgid "Wipe tower rotation angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2223
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2230
msgid "Wipe into this object's infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2231
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2238
msgid "Wipe into this object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2239
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2245
msgid "Maximal bridging distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2246
msgid "Maximal distance between supports on sparse infill sections."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2252
msgid "XY Size Compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2254
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2262
msgid "Z offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2263
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2330
msgid "Display width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2331
msgid "Width of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2336
msgid "Display height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2337
msgid "Height of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2342
msgid "Number of pixels in"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2344
msgid "Number of pixels in X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2350
msgid "Number of pixels in Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2355
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2356
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2357
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2362
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2363
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2364
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2369
msgid "Display orientation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2370
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2376
msgid "Landscape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2377
msgid "Portrait"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2382
msgid "Fast"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2383
msgid "Fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2384
msgid "Time of the fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2391
msgid "Slow"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2392
msgid "Slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2393
msgid "Time of the slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2400
msgid "Area fill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2401
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2408 src/libslic3r/PrintConfig.cpp:2409
#: src/libslic3r/PrintConfig.cpp:2410
msgid "Printer scaling correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2416 src/libslic3r/PrintConfig.cpp:2417
msgid "Printer absolute correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2418
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2425
msgid "Printer gamma correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2426
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2438 src/libslic3r/PrintConfig.cpp:2439
msgid "SLA material type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2450 src/libslic3r/PrintConfig.cpp:2451
msgid "Initial layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2457 src/libslic3r/PrintConfig.cpp:2458
msgid "Bottle volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2459
msgid "ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2464 src/libslic3r/PrintConfig.cpp:2465
msgid "Bottle weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2466
msgid "kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2473
msgid "g/ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2480
msgid "money/bottle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2485
msgid "Faded layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2486
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2493 src/libslic3r/PrintConfig.cpp:2494
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2501 src/libslic3r/PrintConfig.cpp:2502
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2509 src/libslic3r/PrintConfig.cpp:2510
msgid "Exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2516 src/libslic3r/PrintConfig.cpp:2517
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2524 src/libslic3r/PrintConfig.cpp:2525
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2532 src/libslic3r/PrintConfig.cpp:2533
msgid "Initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2539 src/libslic3r/PrintConfig.cpp:2540
msgid "Correction for expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2546
msgid "SLA print material notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2547
msgid "You can put your notes regarding the SLA print material here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2559 src/libslic3r/PrintConfig.cpp:2570
msgid "Default SLA material profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2581
msgid "Generate supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2583
msgid "Generate supports for the models"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2588
msgid "Support head front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2590
msgid "Diameter of the pointing side of the head"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2597
msgid "Support head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2599
msgid "How much the pinhead has to penetrate the model surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2606
msgid "Support head width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2608
msgid "Width from the back sphere center to the front sphere center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2616
msgid "Support pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2618
msgid "Diameter in mm of the support pillars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2626
msgid "Support pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2627
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2635
msgid "Zig-Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2636
msgid "Cross"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2637
msgid "Dynamic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2649
msgid "Pillar widening factor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2651
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2660
msgid "Support base diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2662
msgid "Diameter in mm of the pillar base"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2670
msgid "Support base height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2672
msgid "The height of the pillar base cone"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2679
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2682
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2692
msgid "Critical angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2694
msgid "The default angle for connecting support sticks and junctions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2702
msgid "Max bridge length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2704
msgid "The max length of a bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2711
msgid "Max pillar linking distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2713
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2721
msgid "Object elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2723
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2734
msgid "This is a relative measure of support points density."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2740
msgid "Minimal distance of the support points"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2742
msgid "No support points will be placed closer than this threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2748
msgid "Use pad"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2750
msgid "Add a pad underneath the supported model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2755
msgid "Pad wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2757
msgid "The thickness of the pad and its optional cavity walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2765
msgid "Pad wall height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2766
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2779
msgid "Pad brim size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2780
msgid "How far should the pad extend around the contained geometry"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2790
msgid "Max merge distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2792
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2812
msgid "Pad wall slope"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2814
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2823
msgid "Pad around object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2825
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2830
msgid "Pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2832
msgid "Force pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2837
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2839
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2848
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2850
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2857
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2859
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2866
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2869
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3247
msgid "Export OBJ"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3248
msgid "Export the model(s) as OBJ."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3259
msgid "Export SLA"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3260
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3265
msgid "Export 3MF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3266
msgid "Export the model(s) as 3MF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3270
msgid "Export AMF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3271
msgid "Export the model(s) as AMF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3275
msgid "Export STL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3276
msgid "Export the model(s) as STL."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3281
msgid "Slice the model and export toolpaths as G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3286
msgid "Slice"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3287
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3292
msgid "Help"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3293
msgid "Show this help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3298
msgid "Help (FFF options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3299
msgid "Show the full list of print/G-code configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3303
msgid "Help (SLA options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3304
msgid "Show the full list of SLA print configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3308
msgid "Output Model Info"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3309
msgid "Write information about the model to the console."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3313
msgid "Save config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3314
msgid "Save configuration to the specified file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3324
msgid "Align XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3325
msgid "Align the model to the given point."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3330
msgid "Cut model at the given Z."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3351
msgid "Center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3352
msgid "Center the print around the given center."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3356
msgid "Don't arrange"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3357
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3360
msgid "Duplicate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3361
msgid "Multiply copies by this factor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3365
msgid "Duplicate by grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3366
msgid "Multiply copies by creating a grid."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3369
msgid "Merge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3370
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3375
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3379
msgid "Rotation angle around the Z axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3383
msgid "Rotate around X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3384
msgid "Rotation angle around the X axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3388
msgid "Rotate around Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3389
msgid "Rotation angle around the Y axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3394
msgid "Scaling factor or percentage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3399
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3402
msgid "Scale to Fit"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3403
msgid "Scale to fit the given volume."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3412
msgid "Ignore non-existent config files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3413
msgid "Do not fail if a file supplied to --load does not exist."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3416
msgid "Load config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3417
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3420
msgid "Output File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3421
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3431
msgid "Data directory"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3432
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3435
msgid "Logging level"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3436
msgid ""
"Messages with severity lower or eqal to the loglevel will be printed out. 0:"
"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3441
msgid "Render with a software renderer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3442
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""

#: src/libslic3r/PrintObject.cpp:106
msgid "Processing triangulated mesh"
msgstr ""

#: src/libslic3r/PrintObject.cpp:150
msgid "Generating perimeters"
msgstr ""

#: src/libslic3r/PrintObject.cpp:260
msgid "Preparing infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:400
msgid "Generating support material"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:362
msgid "Height (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:364
msgid "Width (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:366
msgid "Speed (mm/s)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:368
msgid "Fan Speed (%)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:370
msgid "Volumetric flow rate (mm³/s)"
msgstr ""