# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-02-19 13:53+0100\n"
"PO-Revision-Date: 2020-02-20 21:20+0100\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Poedit 2.2.4\n"
"Last-Translator: Simon Tillema <simontillema@gmail.com>\n"
"Language: nl\n"

#: src/slic3r/GUI/AboutDialog.cpp:39 src/slic3r/GUI/AboutDialog.cpp:291
msgid "Portions copyright"
msgstr "Gedeeltelijk auteursrecht"

#: src/slic3r/GUI/AboutDialog.cpp:127 src/slic3r/GUI/AboutDialog.cpp:256
msgid "Copyright"
msgstr "Auteursrecht"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:129
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""
"Licentieovereenkomsten van alle programma's (en onderdelen) zijn deel van de "
"applicatielicentieovereenkomst"

#: src/slic3r/GUI/AboutDialog.cpp:199
#, c-format
msgid "About %s"
msgstr "Over %s"

#: src/slic3r/GUI/AboutDialog.cpp:231 src/slic3r/GUI/MainFrame.cpp:64
msgid "Version"
msgstr "Versie"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:258
msgid "is licensed under the"
msgstr "is gelicenseerd onder de"

#: src/slic3r/GUI/AboutDialog.cpp:259
msgid "GNU Affero General Public License, version 3"
msgstr "GNU Affero General Public License, versie 3"

#: src/slic3r/GUI/AboutDialog.cpp:260
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""
"PrusaSlicer is gebaseerd op 'Slic3r' van Alessandro Ranellucci en de RepRap "
"community."

#: src/slic3r/GUI/AboutDialog.cpp:261
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""
"Bijdragen van Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr "
"Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Simon "
"Tillema en vele anderen."

#: src/slic3r/GUI/AppConfig.cpp:114
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""
"Fout in het configuratiebestand. Het is waarschijnlijk beschadigd. Probeer "
"de fout handmatig te verwijderen om het te herstellen. Dit heeft geen effect "
"op uw gebruikersprofielen."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:118
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?"
msgstr ""
"Kopiëren van de tijdelijke G-code naar de output is mislukt. Is de SD-kaart "
"geblokkeerd?"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:120
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:470
msgid "Running post-processing scripts"
msgstr "Uitvoeren van nabewerkingsscripts"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:122
msgid "G-code file exported to %1%"
msgstr "gcode-bestand geëxporteerd naar %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:126
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:176
msgid "Slicing complete"
msgstr "Slicen compleet"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172
msgid "Masked SLA file exported to %1%"
msgstr "Verborgen SLA-bestand geëxporteerd naar %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:214
#, c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""
"%s veroorzaakte een fout. Dit komt mogelijk door een geheugentekort. Als u "
"zeker weet dat u genoeg RAM heeft, kan dit ook een andere systeemfout zijn. "
"We waarderen het als u dit meldt."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:472
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr "Kopiëren van de tijdelijke G-code naar de output is mislukt"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:497
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""
"Plannen van de upload naar '%1%'. Zie Venster -> Printhost uploadwachtrij"

#: src/slic3r/GUI/BedShapeDialog.cpp:66 src/slic3r/GUI/GUI_ObjectList.cpp:2055
msgid "Shape"
msgstr "Vorm"

#: src/slic3r/GUI/BedShapeDialog.cpp:73
msgid "Rectangular"
msgstr "Rechthoekig"

#: src/slic3r/GUI/BedShapeDialog.cpp:77
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:160
#: src/slic3r/GUI/Tab.cpp:2326
msgid "Size"
msgstr "Grootte"

#: src/slic3r/GUI/BedShapeDialog.cpp:78
msgid "Size in X and Y of the rectangular plate."
msgstr "Breedte en diepte van rechthoekig bed."

#: src/slic3r/GUI/BedShapeDialog.cpp:84
msgid "Origin"
msgstr "Nulpunt"

#: src/slic3r/GUI/BedShapeDialog.cpp:85
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""
"Afstand vanaf het nulpunt in de G-code tot de linkervoorhoek van de "
"rechthoek."

#: src/slic3r/GUI/BedShapeDialog.cpp:89
msgid "Circular"
msgstr "Rond"

#: src/slic3r/GUI/BedShapeDialog.cpp:92 src/slic3r/GUI/ConfigWizard.cpp:218
#: src/slic3r/GUI/ConfigWizard.cpp:970 src/slic3r/GUI/ConfigWizard.cpp:984
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:135
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:333
#: src/slic3r/GUI/ObjectDataViewModel.cpp:94
#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75
#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:91
#: src/libslic3r/PrintConfig.cpp:122 src/libslic3r/PrintConfig.cpp:188
#: src/libslic3r/PrintConfig.cpp:246 src/libslic3r/PrintConfig.cpp:321
#: src/libslic3r/PrintConfig.cpp:329 src/libslic3r/PrintConfig.cpp:379
#: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:516
#: src/libslic3r/PrintConfig.cpp:534 src/libslic3r/PrintConfig.cpp:712
#: src/libslic3r/PrintConfig.cpp:1231 src/libslic3r/PrintConfig.cpp:1292
#: src/libslic3r/PrintConfig.cpp:1310 src/libslic3r/PrintConfig.cpp:1328
#: src/libslic3r/PrintConfig.cpp:1384 src/libslic3r/PrintConfig.cpp:1394
#: src/libslic3r/PrintConfig.cpp:1516 src/libslic3r/PrintConfig.cpp:1524
#: src/libslic3r/PrintConfig.cpp:1565 src/libslic3r/PrintConfig.cpp:1573
#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1591
#: src/libslic3r/PrintConfig.cpp:1599 src/libslic3r/PrintConfig.cpp:1682
#: src/libslic3r/PrintConfig.cpp:1914 src/libslic3r/PrintConfig.cpp:1985
#: src/libslic3r/PrintConfig.cpp:2019 src/libslic3r/PrintConfig.cpp:2147
#: src/libslic3r/PrintConfig.cpp:2226 src/libslic3r/PrintConfig.cpp:2233
#: src/libslic3r/PrintConfig.cpp:2240 src/libslic3r/PrintConfig.cpp:2270
#: src/libslic3r/PrintConfig.cpp:2280 src/libslic3r/PrintConfig.cpp:2290
#: src/libslic3r/PrintConfig.cpp:2450 src/libslic3r/PrintConfig.cpp:2484
#: src/libslic3r/PrintConfig.cpp:2623 src/libslic3r/PrintConfig.cpp:2632
#: src/libslic3r/PrintConfig.cpp:2641 src/libslic3r/PrintConfig.cpp:2651
#: src/libslic3r/PrintConfig.cpp:2695 src/libslic3r/PrintConfig.cpp:2705
#: src/libslic3r/PrintConfig.cpp:2717 src/libslic3r/PrintConfig.cpp:2737
#: src/libslic3r/PrintConfig.cpp:2747 src/libslic3r/PrintConfig.cpp:2757
#: src/libslic3r/PrintConfig.cpp:2775 src/libslic3r/PrintConfig.cpp:2790
#: src/libslic3r/PrintConfig.cpp:2804 src/libslic3r/PrintConfig.cpp:2815
#: src/libslic3r/PrintConfig.cpp:2828 src/libslic3r/PrintConfig.cpp:2873
#: src/libslic3r/PrintConfig.cpp:2883 src/libslic3r/PrintConfig.cpp:2892
#: src/libslic3r/PrintConfig.cpp:2902 src/libslic3r/PrintConfig.cpp:2918
#: src/libslic3r/PrintConfig.cpp:2942
msgid "mm"
msgstr "mm"

#: src/slic3r/GUI/BedShapeDialog.cpp:93 src/libslic3r/PrintConfig.cpp:709
msgid "Diameter"
msgstr "Diameter"

#: src/slic3r/GUI/BedShapeDialog.cpp:94
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""
"Diameter van het printbed. Aangenomen wordt dat het nulpunt in het midden "
"ligt."

#: src/slic3r/GUI/BedShapeDialog.cpp:98 src/slic3r/GUI/GUI_Preview.cpp:249
#: src/libslic3r/ExtrusionEntity.cpp:322
msgid "Custom"
msgstr "Custom"

#: src/slic3r/GUI/BedShapeDialog.cpp:102
msgid "Load shape from STL..."
msgstr "Laad vorm van STL-bestand..."

#: src/slic3r/GUI/BedShapeDialog.cpp:155
msgid "Settings"
msgstr "Instellingen"

#: src/slic3r/GUI/BedShapeDialog.cpp:172
msgid "Texture"
msgstr "Textuur"

#: src/slic3r/GUI/BedShapeDialog.cpp:182 src/slic3r/GUI/BedShapeDialog.cpp:261
msgid "Load..."
msgstr "Laad..."

#: src/slic3r/GUI/BedShapeDialog.cpp:190 src/slic3r/GUI/BedShapeDialog.cpp:269
#: src/slic3r/GUI/Tab.cpp:3114
msgid "Remove"
msgstr "Verwijder"

#: src/slic3r/GUI/BedShapeDialog.cpp:223 src/slic3r/GUI/BedShapeDialog.cpp:302
msgid "Not found: "
msgstr "Niet gevonden: "

#: src/slic3r/GUI/BedShapeDialog.cpp:251
msgid "Model"
msgstr "Model"

#: src/slic3r/GUI/BedShapeDialog.cpp:487
msgid "Choose an STL file to import bed shape from:"
msgstr "Kies een STL-bestand om te importeren als vorm van het bed:"

#: src/slic3r/GUI/BedShapeDialog.cpp:494 src/slic3r/GUI/BedShapeDialog.cpp:543
#: src/slic3r/GUI/BedShapeDialog.cpp:566
msgid "Invalid file format."
msgstr "Ongeldig bestandsformaat."

#: src/slic3r/GUI/BedShapeDialog.cpp:505
msgid "Error! Invalid model"
msgstr "Fout! Ongeldig model"

#: src/slic3r/GUI/BedShapeDialog.cpp:513
msgid "The selected file contains no geometry."
msgstr "Het geselecteerde bestand bevat geen geometrie."

#: src/slic3r/GUI/BedShapeDialog.cpp:517
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""
"Het geselecteerde bestand bevat niet-verbonden delen. Dit wordt niet "
"ondersteund."

#: src/slic3r/GUI/BedShapeDialog.cpp:532
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr "Kies een PNG- of SVG-bestand als textuur voor het bed:"

#: src/slic3r/GUI/BedShapeDialog.cpp:555
msgid "Choose an STL file to import bed model from:"
msgstr "Kies een STL-bestand als vorm voor het bed:"

#: src/slic3r/GUI/BedShapeDialog.hpp:59 src/slic3r/GUI/ConfigWizard.cpp:929
msgid "Bed Shape"
msgstr "Vorm van het bed"

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr "Zoeken naar netwerk"

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr "Adres"

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr "Hostnaam"

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr "Servicenaam"

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr "OctoPrint-versie"

#: src/slic3r/GUI/BonjourDialog.cpp:218
msgid "Searching for devices"
msgstr "Zoeken naar apparaten"

#: src/slic3r/GUI/BonjourDialog.cpp:225
msgid "Finished"
msgstr "Voltooid"

#: src/slic3r/GUI/ButtonsDescription.cpp:16
msgid "Buttons And Text Colors Description"
msgstr "Knoppen- en tekstkleurbeschrijving"

#: src/slic3r/GUI/ButtonsDescription.cpp:36
msgid "Value is the same as the system value"
msgstr "Waarde is gelijk aan standaardwaarde"

#: src/slic3r/GUI/ButtonsDescription.cpp:53
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""
"Waarde is veranderd en is niet gelijk aan standaardwaarde of laatst "
"opgeslagen waarde"

#: src/slic3r/GUI/ConfigManipulation.cpp:48
msgid ""
"Zero layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""
"Een laagdikte van 0 is niet mogelijk.\n"
"\n"
"De laagdikte wordt ingesteld op 0.01."

#: src/slic3r/GUI/ConfigManipulation.cpp:49
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 src/slic3r/GUI/Tab.cpp:1051
#: src/libslic3r/PrintConfig.cpp:71
msgid "Layer height"
msgstr "Laagdikte"

#: src/slic3r/GUI/ConfigManipulation.cpp:60
msgid ""
"Zero first layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""
"Een laagdikte voor de eerste laag van 0 is niet mogelijk.\n"
"\n"
"De laagdikte voor de eerste laag wordt ingesteld op 0,01."

#: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:889
msgid "First layer height"
msgstr "Laagdikte eerste laag"

#: src/slic3r/GUI/ConfigManipulation.cpp:81
#, no-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Ensure vertical shell thickness enabled\n"
"- Detect thin walls disabled"
msgstr ""
"De spiraalmodus vereist:\n"
"- één perimeter\n"
"- geen dichte toplagen\n"
"- vullingsdichtheid van 0%\n"
"- geen supportmateriaal\n"
"- 'Garandeer verticale shelldikte' aan\n"
"- 'Detecteer dunne wanden' uit"

#: src/slic3r/GUI/ConfigManipulation.cpp:89
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""
"Moeten deze instellingen aangepast worden om de spiraalmodus te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:90
msgid "Spiral Vase"
msgstr "Spiraalmodus"

#: src/slic3r/GUI/ConfigManipulation.cpp:115
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""
"Het afveegblok ondersteunt momenteel alleen niet-oplosbare materialen\n"
"als deze met de huidige extruder geprint worden zonder dat er een toolwissel "
"plaatsvindt\n"
"(zowel 'support_material_extruder' als 'support_material_interface_extruder' "
"moeten op 0 gezet worden)."

#: src/slic3r/GUI/ConfigManipulation.cpp:119
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""
"Moeten deze instellingen aangepast worden om het afveegblok te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:120
#: src/slic3r/GUI/ConfigManipulation.cpp:140
msgid "Wipe Tower"
msgstr "Afveegblok"

#: src/slic3r/GUI/ConfigManipulation.cpp:136
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""
"De supportlagen voor het afveegblok moeten gesynchroniseerd zijn met de\n"
"objectlagen om met oplosbaar support te werken."

#: src/slic3r/GUI/ConfigManipulation.cpp:139
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""
"Moeten de supportlagen gesynchroniseerd worden om het afveegblok te "
"activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:159
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""
"Support werkt beter als de volgende instellingen aan staan:\n"
"- Detecteer brugperimeters"

#: src/slic3r/GUI/ConfigManipulation.cpp:162
msgid "Shall I adjust those settings for supports?"
msgstr "Moeten deze instellingen aangepast worden voor het support?"

#: src/slic3r/GUI/ConfigManipulation.cpp:163
msgid "Support Generator"
msgstr "Supportgenerator"

#: src/slic3r/GUI/ConfigManipulation.cpp:208
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr "Het %1% vullingspatroon werkt niet bij een dichtheid van 100%%."

#: src/slic3r/GUI/ConfigManipulation.cpp:210
msgid "Shall I switch to rectilinear fill pattern?"
msgstr "Moet omgeschakeld worden naar een rechtlijnig vulpatroon?"

#: src/slic3r/GUI/ConfigManipulation.cpp:211
#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:94
#: src/slic3r/GUI/GUI_ObjectList.cpp:612 src/slic3r/GUI/Plater.cpp:522
#: src/slic3r/GUI/Tab.cpp:1093 src/slic3r/GUI/Tab.cpp:1094
#: src/libslic3r/PrintConfig.cpp:203 src/libslic3r/PrintConfig.cpp:416
#: src/libslic3r/PrintConfig.cpp:436 src/libslic3r/PrintConfig.cpp:776
#: src/libslic3r/PrintConfig.cpp:790 src/libslic3r/PrintConfig.cpp:827
#: src/libslic3r/PrintConfig.cpp:981 src/libslic3r/PrintConfig.cpp:991
#: src/libslic3r/PrintConfig.cpp:1009 src/libslic3r/PrintConfig.cpp:1028
#: src/libslic3r/PrintConfig.cpp:1047 src/libslic3r/PrintConfig.cpp:1728
#: src/libslic3r/PrintConfig.cpp:1745
msgid "Infill"
msgstr "Vulling"

#: src/slic3r/GUI/ConfigManipulation.cpp:317
msgid "Head penetration should not be greater than the head width."
msgstr "De kopinsteek mag niet groter zijn dan de kopbreedte."

#: src/slic3r/GUI/ConfigManipulation.cpp:319
msgid "Invalid Head penetration"
msgstr "Ongeldige kopinsteek"

#: src/slic3r/GUI/ConfigManipulation.cpp:330
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr "De pinkopdiameter moet kleiner zijn dan de pijlerdiameter."

#: src/slic3r/GUI/ConfigManipulation.cpp:332
msgid "Invalid pinhead diameter"
msgstr "Ongeldige pinkopdiameter"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
msgid "Upgrade"
msgstr "Upgrade"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Downgrade"
msgstr "Downgrade"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "Before roll back"
msgstr "Voor het teruggaan"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
msgid "User"
msgstr "Gebruiker"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
msgid "Unknown"
msgstr "Onbekend"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
msgid "Active"
msgstr "Actief"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
msgid "PrusaSlicer version"
msgstr "PrusaSlicer-versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Preset.cpp:1519
msgid "print"
msgstr "print"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "filaments"
msgstr "filamenten"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 src/slic3r/GUI/Preset.cpp:1523
msgid "printer"
msgstr "printer"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 src/slic3r/GUI/Tab.cpp:973
msgid "vendor"
msgstr "leverancier"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57
msgid "version"
msgstr "versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
msgid "min PrusaSlicer version"
msgstr "minimale PrusaSlicer-versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
msgid "max PrusaSlicer version"
msgstr "maximale PrusaSlicer-versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63
msgid "model"
msgstr "model"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63
msgid "variants"
msgstr "varianten"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
#, c-format
msgid "Incompatible with this %s"
msgstr "Incompatibel met deze %s"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
msgid "Activate"
msgstr "Activeer"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:104
msgid "Configuration Snapshots"
msgstr "Configuratiesnapshots"

#: src/slic3r/GUI/ConfigWizard.cpp:218
msgid "nozzle"
msgstr "nozzle"

#: src/slic3r/GUI/ConfigWizard.cpp:222
msgid "Alternate nozzles:"
msgstr "Alternatieve nozzles:"

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "All standard"
msgstr "Alle standaard"

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "Standard"
msgstr "Standaard"

#: src/slic3r/GUI/ConfigWizard.cpp:290 src/slic3r/GUI/ConfigWizard.cpp:573
#: src/slic3r/GUI/Tab.cpp:3164
msgid "All"
msgstr "Alle"

#: src/slic3r/GUI/ConfigWizard.cpp:291 src/slic3r/GUI/ConfigWizard.cpp:574
#: src/slic3r/GUI/Plater.cpp:494 src/slic3r/GUI/Plater.cpp:634
#: src/libslic3r/ExtrusionEntity.cpp:309
msgid "None"
msgstr "Geen"

#: src/slic3r/GUI/ConfigWizard.cpp:427
#, c-format
msgid "Welcome to the %s Configuration Assistant"
msgstr "Welkom bij de %s configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:429
#, c-format
msgid "Welcome to the %s Configuration Wizard"
msgstr "Welkom bij de %s configuratiewizard"

#: src/slic3r/GUI/ConfigWizard.cpp:431
msgid "Welcome"
msgstr "Welkom"

#: src/slic3r/GUI/ConfigWizard.cpp:433
#, c-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""
"Hallo, welkom bij %s! Deze '%s' helpt met de eerste setup; nog een paar "
"instellingen en de printer kan gebruikt worden."

#: src/slic3r/GUI/ConfigWizard.cpp:438
msgid ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"
msgstr ""
"Verwijder alle gebruiksprofielen; installeer vanaf scratch (vooraf wordt een "
"snapshot genomen)"

#: src/slic3r/GUI/ConfigWizard.cpp:481
#, c-format
msgid "%s Family"
msgstr "%s serie"

#: src/slic3r/GUI/ConfigWizard.cpp:565
msgid "Vendor:"
msgstr "Leverancier:"

#: src/slic3r/GUI/ConfigWizard.cpp:566
msgid "Profile:"
msgstr "Profiel:"

#: src/slic3r/GUI/ConfigWizard.cpp:603 src/slic3r/GUI/ConfigWizard.cpp:631
msgid "(All)"
msgstr "(Alle)"

#: src/slic3r/GUI/ConfigWizard.cpp:732
msgid "Custom Printer Setup"
msgstr "Custom printersetup"

#: src/slic3r/GUI/ConfigWizard.cpp:732
msgid "Custom Printer"
msgstr "Custom printer"

#: src/slic3r/GUI/ConfigWizard.cpp:734
msgid "Define a custom printer profile"
msgstr "Definieer een custom-printerprofiel"

#: src/slic3r/GUI/ConfigWizard.cpp:736
msgid "Custom profile name:"
msgstr "Custom-profielnaam:"

#: src/slic3r/GUI/ConfigWizard.cpp:761
msgid "Automatic updates"
msgstr "Automatische updates"

#: src/slic3r/GUI/ConfigWizard.cpp:761
msgid "Updates"
msgstr "Updates"

#: src/slic3r/GUI/ConfigWizard.cpp:769 src/slic3r/GUI/Preferences.cpp:64
msgid "Check for application updates"
msgstr "Controleer op programma-updates"

#: src/slic3r/GUI/ConfigWizard.cpp:773
#, c-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"Als dit aan staat zal %s online checken op nieuwe programmaversies. Als er "
"een nieuwe versie beschikbaar komt, zal een melding getoond worden bij de "
"volgende keer opstarten (nooit tijdens gebruik van het programma). Dit is "
"slechts een melding; er zal geen automatische installatie plaatsvinden."

#: src/slic3r/GUI/ConfigWizard.cpp:779 src/slic3r/GUI/Preferences.cpp:80
msgid "Update built-in Presets automatically"
msgstr "Update ingebouwde presets automatisch"

#: src/slic3r/GUI/ConfigWizard.cpp:783
#, c-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"Als dit aan staat zal %s updates of ingebouwde systeem-presets op de "
"achtergrond downloaden. Deze updates worden gedownload naar een tijdelijke "
"locatie. Wanneer een nieuwe versie beschikbaar komt zal deze getoond worden "
"bij het opstarten."

#: src/slic3r/GUI/ConfigWizard.cpp:786
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""
"Updates worden nooit geïnstalleerd en overschreven zonder toestemming van de "
"gebruiker."

#: src/slic3r/GUI/ConfigWizard.cpp:791
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""
"Voor een update wordt geïnstalleerd wordt daarnaast een backup-snapshot van "
"de hele configuratie gemaakt."

#: src/slic3r/GUI/ConfigWizard.cpp:798 src/slic3r/GUI/GUI_ObjectList.cpp:1660
#: src/slic3r/GUI/GUI_ObjectList.cpp:3950 src/slic3r/GUI/Plater.cpp:3203
#: src/slic3r/GUI/Plater.cpp:3912 src/slic3r/GUI/Plater.cpp:3941
msgid "Reload from disk"
msgstr "Herlaad vanaf schijf"

#: src/slic3r/GUI/ConfigWizard.cpp:801
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""
"Exporteer hele padnamen van modellen en onderdelen in .3MF- en .AMF-bestanden"

#: src/slic3r/GUI/ConfigWizard.cpp:805
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""
"Als dit is ingeschakeld kan het 'Herladen van schijf'-commando automatisch "
"bestanden vinden en laden wanneer deze worden opgevraagd.\n"
"Als dit niet is ingeschakeld zal het commando vragen elk bestand te "
"selecteren door een bestandsvenster te openen."

#: src/slic3r/GUI/ConfigWizard.cpp:813
msgid "View mode"
msgstr "Weergavemodus"

#: src/slic3r/GUI/ConfigWizard.cpp:815
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""
"De gebruikersinterface van PrusaSlicer kent drie varianten:\n"
"Eenvoudig, Geavanceerd en Expert.\n"
"De eenvoudige modus laat alleen de meest gebruikte instellingen zien. De "
"andere twee bieden meer geavanceerde finetuning. Ze zijn geschikt voor "
"respectievelijk gevorderde en deskundige gebruikers."

#: src/slic3r/GUI/ConfigWizard.cpp:820
msgid "Simple mode"
msgstr "Eenvoudige modus"

#: src/slic3r/GUI/ConfigWizard.cpp:821
msgid "Advanced mode"
msgstr "Geavanceerde modus"

#: src/slic3r/GUI/ConfigWizard.cpp:822
msgid "Expert mode"
msgstr "Expertmodus"

#: src/slic3r/GUI/ConfigWizard.cpp:856
msgid "Other Vendors"
msgstr "Overige leveranciers"

#: src/slic3r/GUI/ConfigWizard.cpp:860
#, c-format
msgid "Pick another vendor supported by %s"
msgstr "Kies een andere leverancier die ondersteund wordt door %s"

#: src/slic3r/GUI/ConfigWizard.cpp:891
msgid "Firmware Type"
msgstr "Firmwaretype"

#: src/slic3r/GUI/ConfigWizard.cpp:891 src/slic3r/GUI/Tab.cpp:1949
msgid "Firmware"
msgstr "Firmware"

#: src/slic3r/GUI/ConfigWizard.cpp:895
msgid "Choose the type of firmware used by your printer."
msgstr "Kies het firmwaretype dat de printer gebruikt."

#: src/slic3r/GUI/ConfigWizard.cpp:929
msgid "Bed Shape and Size"
msgstr "Grootte en vorm van het bed"

#: src/slic3r/GUI/ConfigWizard.cpp:932
msgid "Set the shape of your printer's bed."
msgstr "Stel de vorm van het printbed in."

#: src/slic3r/GUI/ConfigWizard.cpp:952
msgid "Filament and Nozzle Diameters"
msgstr "Filament- en nozzlediameters"

#: src/slic3r/GUI/ConfigWizard.cpp:952
msgid "Print Diameters"
msgstr "Printdiameters"

#: src/slic3r/GUI/ConfigWizard.cpp:966
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "Voer de nozzlediameter in."

#: src/slic3r/GUI/ConfigWizard.cpp:969
msgid "Nozzle Diameter:"
msgstr "Nozzlediameter:"

#: src/slic3r/GUI/ConfigWizard.cpp:979
msgid "Enter the diameter of your filament."
msgstr "Voer de filamentdiameter in."

#: src/slic3r/GUI/ConfigWizard.cpp:980
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"Nauwkeurigheid is belangrijk. Gebruik een schuifmaat en meet de diameter op "
"meerdere plekken over de gehele rol. Bereken daarna het gemiddelde."

#: src/slic3r/GUI/ConfigWizard.cpp:983
msgid "Filament Diameter:"
msgstr "Filamentdiameter:"

#: src/slic3r/GUI/ConfigWizard.cpp:1017
msgid "Extruder and Bed Temperatures"
msgstr "Extruder- en bedtemperaturen"

#: src/slic3r/GUI/ConfigWizard.cpp:1017
msgid "Temperatures"
msgstr "Temperaturen"

#: src/slic3r/GUI/ConfigWizard.cpp:1033
msgid "Enter the temperature needed for extruding your filament."
msgstr "Voer de benodigde temperatuur in om het filament te extruderen."

#: src/slic3r/GUI/ConfigWizard.cpp:1034
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "Een vuistregel is 180 - 230 °C voor PLA en 220 - 260 °C voor ABS."

#: src/slic3r/GUI/ConfigWizard.cpp:1037
msgid "Extrusion Temperature:"
msgstr "Extrusietemperatuur:"

#: src/slic3r/GUI/ConfigWizard.cpp:1038 src/slic3r/GUI/ConfigWizard.cpp:1052
msgid "°C"
msgstr "°C"

#: src/slic3r/GUI/ConfigWizard.cpp:1047
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""
"Voer de temperatuur van het bed in om het filament goed te laten hechten aan "
"het bed."

#: src/slic3r/GUI/ConfigWizard.cpp:1048
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""
"Een vuistregel is 60 °C voor PLA en 110 °C voor ABS. Stel in op 0 als de "
"printer geen verwarmd bed heeft."

#: src/slic3r/GUI/ConfigWizard.cpp:1051
msgid "Bed Temperature:"
msgstr "Bedtemperatuur:"

#: src/slic3r/GUI/ConfigWizard.cpp:1471 src/slic3r/GUI/ConfigWizard.cpp:2013
msgid "Filaments"
msgstr "Filamenten"

#: src/slic3r/GUI/ConfigWizard.cpp:1471 src/slic3r/GUI/ConfigWizard.cpp:2015
msgid "SLA Materials"
msgstr "SLA-materialen"

#: src/slic3r/GUI/ConfigWizard.cpp:1525
msgid "FFF Technology Printers"
msgstr "FFF-technologie printers"

#: src/slic3r/GUI/ConfigWizard.cpp:1530
msgid "SLA Technology Printers"
msgstr "SLA-technologie printers"

#: src/slic3r/GUI/ConfigWizard.cpp:1751 src/slic3r/GUI/DoubleSlider.cpp:1903
#: src/slic3r/GUI/DoubleSlider.cpp:1924 src/slic3r/GUI/GUI.cpp:240
msgid "Notice"
msgstr "Let op"

#: src/slic3r/GUI/ConfigWizard.cpp:1760
msgid "You have to select at least one filament for selected printers"
msgstr "Selecteer tenminste één filament voor de geselecteerde printer(s)"

#: src/slic3r/GUI/ConfigWizard.cpp:1761
msgid "Do you want to automatic select default filaments?"
msgstr "Wilt u automatisch de standaard filamenten selecteren?"

#: src/slic3r/GUI/ConfigWizard.cpp:1771
msgid "You have to select at least one material for selected printers"
msgstr "Selecteer tenminste één materiaal voor de geselecteerde printer(s)"

#: src/slic3r/GUI/ConfigWizard.cpp:1772
msgid "Do you want to automatic select default materials?"
msgstr "Wilt u automatisch de standaard materialen selecteren?"

#: src/slic3r/GUI/ConfigWizard.cpp:1976
msgid "Select all standard printers"
msgstr "Selecteer alle standaard printers"

#: src/slic3r/GUI/ConfigWizard.cpp:1979
msgid "< &Back"
msgstr "< Terug"

#: src/slic3r/GUI/ConfigWizard.cpp:1980
msgid "&Next >"
msgstr "Volgende >"

#: src/slic3r/GUI/ConfigWizard.cpp:1981
msgid "&Finish"
msgstr "Voltooien"

#: src/slic3r/GUI/ConfigWizard.cpp:1982 src/slic3r/GUI/FirmwareDialog.cpp:151
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
msgid "Cancel"
msgstr "Annuleren"

#: src/slic3r/GUI/ConfigWizard.cpp:1995
msgid "Prusa FFF Technology Printers"
msgstr "Prusa FFF-technologie printers"

#: src/slic3r/GUI/ConfigWizard.cpp:1998
msgid "Prusa MSLA Technology Printers"
msgstr "Prusa MSLA-technologie printers"

#: src/slic3r/GUI/ConfigWizard.cpp:2013
msgid "Filament Profiles Selection"
msgstr "Profielselectie voor filament"

#: src/slic3r/GUI/ConfigWizard.cpp:2013 src/slic3r/GUI/GUI_ObjectList.cpp:3549
msgid "Type:"
msgstr "Type:"

#: src/slic3r/GUI/ConfigWizard.cpp:2015
msgid "SLA Material Profiles Selection"
msgstr "Profielselectie voor SLA materialen"

#: src/slic3r/GUI/ConfigWizard.cpp:2015
msgid "Layer height:"
msgstr "Laagdikte:"

#: src/slic3r/GUI/ConfigWizard.cpp:2109
msgid "Configuration Assistant"
msgstr "Configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:2110
msgid "Configuration &Assistant"
msgstr "Configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:2112
msgid "Configuration Wizard"
msgstr "Configuratiewizard"

#: src/slic3r/GUI/ConfigWizard.cpp:2113
msgid "Configuration &Wizard"
msgstr "Configuratiewizard"

#: src/slic3r/GUI/DoubleSlider.cpp:79
msgid "Place bearings in slots and resume printing"
msgstr "Plaats inserts in gaten en ga door met printen"

#: src/slic3r/GUI/DoubleSlider.cpp:948
msgid "One layer mode"
msgstr "Een-laagsmodus"

#: src/slic3r/GUI/DoubleSlider.cpp:950
msgid "Discard all custom changes"
msgstr "Alle aangepaste wijzigingen afwijzen"

#: src/slic3r/GUI/DoubleSlider.cpp:953
#, c-format
msgid "Jump to height %s or Set extruder sequence for the entire print"
msgstr "Ga naar hoogte %s of stel extrudervolgorde voor de hele print in"

#: src/slic3r/GUI/DoubleSlider.cpp:955 src/slic3r/GUI/DoubleSlider.cpp:1527
#: src/slic3r/GUI/DoubleSlider.cpp:1649
msgid "Jump to height"
msgstr "Ga naar hoogte"

#: src/slic3r/GUI/DoubleSlider.cpp:958
msgid "Edit current color - Right click the colored slider segment"
msgstr "Wijzig huidige kleur; klik op het gekleurde segment"

#: src/slic3r/GUI/DoubleSlider.cpp:968
msgid "Print mode"
msgstr "Printmodus"

#: src/slic3r/GUI/DoubleSlider.cpp:982
msgid "Add extruder change - Left click"
msgstr "Voeg extruderwissel toe; linkermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:984
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""
"Voeg kleurwissel toe; linkermuisknop voor ingestelde kleur of SHIFT + "
"linkermuisknop voor custom kleurselectie"

#: src/slic3r/GUI/DoubleSlider.cpp:986
msgid "Add color change - Left click"
msgstr "Voeg kleurwissel toe; linkermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:987
msgid "or press \"+\" key"
msgstr "of druk op de '+'-toets"

#: src/slic3r/GUI/DoubleSlider.cpp:989
msgid "Add another code - Ctrl + Left click"
msgstr "Voeg nog een code toe; CTRL + linkermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:990
msgid "Add another code - Right click"
msgstr "Voeg nog een code toe; rechtermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:996
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""
"Het achtereenvolgens printen staat aan.\n"
"Het is niet mogelijk om custom G-codes aan objecten toe te voegen voor het "
"achtereenvolgens printen.\n"
"Deze code wordt niet uitgevoerd bij de generatie van de G-code."

#: src/slic3r/GUI/DoubleSlider.cpp:1003
msgid "Color change (\"%1%\")"
msgstr "Kleurwissel (%1%)"

#: src/slic3r/GUI/DoubleSlider.cpp:1004
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr "Kleurwissel (%1%) voor extruder %2%"

#: src/slic3r/GUI/DoubleSlider.cpp:1007
msgid "Pause print (\"%1%\")"
msgstr "Pauzeer print (%1%)"

#: src/slic3r/GUI/DoubleSlider.cpp:1009
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr "Extruder (tool) is veranderd naar extruder %1%"

#: src/slic3r/GUI/DoubleSlider.cpp:1017
msgid "Note"
msgstr "Let op"

#: src/slic3r/GUI/DoubleSlider.cpp:1019
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""
"De G-code die is gekoppeld aan deze markering is in strijd met de "
"printmodus.\n"
"Dit aanpassen zal de gegevens van de schuif ook aanpassen."

#: src/slic3r/GUI/DoubleSlider.cpp:1022
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""
"Er is een kleurwissel voor een extruder die niet wordt gebruikt tot het eind "
"van de print.\n"
"Deze code wordt niet toegevoegd bij de generatie van de G-code."

#: src/slic3r/GUI/DoubleSlider.cpp:1025
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""
"Er is een extruderwissel naar dezelfde extruder ingesteld.\n"
"Deze code wordt niet toegevoegd bij de generatie van de G-code."

#: src/slic3r/GUI/DoubleSlider.cpp:1028
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""
"Er is een kleurwissel voor een extruder die niet eerder gebruikt is.\n"
"Controleer de instellingen om overbodige kleurwisselingen te voorkomen."

#: src/slic3r/GUI/DoubleSlider.cpp:1033
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr "Verwijder markering; linkermuisknop of druk op de '-'-knop"

#: src/slic3r/GUI/DoubleSlider.cpp:1035
msgid "Edit tick mark - Ctrl + Left click"
msgstr "Bewerk markering; CTRL + linkermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:1036
msgid "Edit tick mark - Right click"
msgstr "Bewerk markering; rechtermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:1132 src/slic3r/GUI/DoubleSlider.cpp:1168
#: src/slic3r/GUI/GLCanvas3D.cpp:977 src/slic3r/GUI/GUI_ObjectList.cpp:1700
#: src/slic3r/GUI/Tab.cpp:2322 src/libslic3r/GCode/PreviewData.cpp:445
#, c-format
msgid "Extruder %d"
msgstr "Extruder %d"

#: src/slic3r/GUI/DoubleSlider.cpp:1133 src/slic3r/GUI/GUI_ObjectList.cpp:1701
msgid "active"
msgstr "actief"

#: src/slic3r/GUI/DoubleSlider.cpp:1142
msgid "Switch code to Change extruder"
msgstr "Code om van extruder te wisselen"

#: src/slic3r/GUI/DoubleSlider.cpp:1142 src/slic3r/GUI/GUI_ObjectList.cpp:1667
msgid "Change extruder"
msgstr "Wissel extruder"

#: src/slic3r/GUI/DoubleSlider.cpp:1143
msgid "Change extruder (N/A)"
msgstr "Wissel extruder (n.v.t.)"

#: src/slic3r/GUI/DoubleSlider.cpp:1145
msgid "Use another extruder"
msgstr "Gebruik een andere extruder"

#: src/slic3r/GUI/DoubleSlider.cpp:1169
msgid "used"
msgstr "gebruikt"

#: src/slic3r/GUI/DoubleSlider.cpp:1177
msgid "Switch code to Color change (%1%) for:"
msgstr "Code om naar kleur %1% te wisselen voor:"

#: src/slic3r/GUI/DoubleSlider.cpp:1178
msgid "Add color change (%1%) for:"
msgstr "Voeg kleurwissel (%1%) toe voor:"

#: src/slic3r/GUI/DoubleSlider.cpp:1475
msgid "Add color change"
msgstr "Voeg kleurwissel toe"

#: src/slic3r/GUI/DoubleSlider.cpp:1485
msgid "Add pause print"
msgstr "Voeg printpauze toe"

#: src/slic3r/GUI/DoubleSlider.cpp:1488
msgid "Add custom G-code"
msgstr "Voeg custom G-code toe"

#: src/slic3r/GUI/DoubleSlider.cpp:1506
msgid "Edit color"
msgstr "Bewerk kleur"

#: src/slic3r/GUI/DoubleSlider.cpp:1507
msgid "Edit pause print message"
msgstr "Bewerk printpauze-bericht"

#: src/slic3r/GUI/DoubleSlider.cpp:1508
msgid "Edit custom G-code"
msgstr "Bewerk custom G-code"

#: src/slic3r/GUI/DoubleSlider.cpp:1514
msgid "Delete color change"
msgstr "Verwijder kleurwissel"

#: src/slic3r/GUI/DoubleSlider.cpp:1515
msgid "Delete tool change"
msgstr "Verwijder toolwissel"

#: src/slic3r/GUI/DoubleSlider.cpp:1516
msgid "Delete pause print"
msgstr "Verwijder printpauze"

#: src/slic3r/GUI/DoubleSlider.cpp:1517
msgid "Delete custom G-code"
msgstr "Verwijder custom G-code"

#: src/slic3r/GUI/DoubleSlider.cpp:1530
msgid "Set extruder sequence for the entire print"
msgstr "Stel extrudervolgorde in voor de hele print"

#: src/slic3r/GUI/DoubleSlider.cpp:1616
msgid "Enter custom G-code used on current layer"
msgstr "Voer custom G-code in voor de huidige laag"

#: src/slic3r/GUI/DoubleSlider.cpp:1617
msgid "Custom G-code on current layer (%1% mm)."
msgstr "Custom G-code voor huidige laag (%1% mm)."

#: src/slic3r/GUI/DoubleSlider.cpp:1632
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""
"Voer een kort bericht in om te tonen op het printscherm tijdens een pauze"

#: src/slic3r/GUI/DoubleSlider.cpp:1633
msgid "Message for pause print on current layer (%1% mm)."
msgstr "Kort bericht voor printpauze bij huidige laag (%1% mm)."

#: src/slic3r/GUI/DoubleSlider.cpp:1648
msgid "Enter the height you want to jump to"
msgstr "Voer de hoogte in waar u naartoe wilt"

#: src/slic3r/GUI/DoubleSlider.cpp:1897
msgid "The last color change data was saved for a single extruder printing."
msgstr ""
"De laatste gegevens van de kleurwissel zijn opgeslagen voor enkel-"
"extruderprinters."

#: src/slic3r/GUI/DoubleSlider.cpp:1898 src/slic3r/GUI/DoubleSlider.cpp:1914
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""
"De laatste gegevens van de kleurwissel zijn opgeslagen voor een multi-"
"extruderprinter."

#: src/slic3r/GUI/DoubleSlider.cpp:1900
msgid "Your current changes will delete all saved color changes."
msgstr "De huidige wijzigingen zullen alle kleurwisselingen verwijderen."

#: src/slic3r/GUI/DoubleSlider.cpp:1901 src/slic3r/GUI/DoubleSlider.cpp:1922
msgid "Are you sure you want to continue?"
msgstr "Weet u zeker dat u wilt doorgaan?"

#: src/slic3r/GUI/DoubleSlider.cpp:1915
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"\tNO if you want all tool changes switch to color changes, \n"
"\tor CANCEL to leave it unchanged"
msgstr ""
"Selecteer JA als u alle opgeslagen toolwisselingen wilt verwijdere,\n"
"Selecteer NEE als u alle toolwisselingen wil omzetten in kleurwisselingen\n"
"of Annuleer om het ongewijzigd te laten"

#: src/slic3r/GUI/DoubleSlider.cpp:1918
msgid "Do you want to delete all saved tool changes?"
msgstr "Wilt u alle opgeslagen toolwisselingen verwijderen?"

#: src/slic3r/GUI/DoubleSlider.cpp:1920
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""
"De laatste gegevens van de kleurwisseling zijn opgeslagen voor een multi-"
"extruderprinter met toolwisselingen voor de hele print."

#: src/slic3r/GUI/DoubleSlider.cpp:1921
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""
"De huidige wijzigingen worden verwijderd voor alle extruder "
"(tool)wisselingen."

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
msgid "Set extruder sequence"
msgstr "Stel extrudervolgorde in"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39
msgid "Set extruder change for every"
msgstr "Stel toolwissel in voor elke"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52
#: src/libslic3r/PrintConfig.cpp:362 src/libslic3r/PrintConfig.cpp:994
#: src/libslic3r/PrintConfig.cpp:1505 src/libslic3r/PrintConfig.cpp:1690
#: src/libslic3r/PrintConfig.cpp:1750 src/libslic3r/PrintConfig.cpp:1930
#: src/libslic3r/PrintConfig.cpp:1976
msgid "layers"
msgstr "lagen"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136
msgid "Set extruder(tool) sequence"
msgstr "Stel toolvolgorde in"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
msgid "Remove extruder from sequence"
msgstr "Verwijder extruder uit de reeks"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192
msgid "Add extruder to sequence"
msgstr "Voeg extruder toe aan de reeks"

#: src/slic3r/GUI/Field.cpp:136
msgid "default value"
msgstr "standaardwaarde"

#: src/slic3r/GUI/Field.cpp:139
msgid "parameter name"
msgstr "parameternaam"

#: src/slic3r/GUI/Field.cpp:150 src/slic3r/GUI/OptionsGroup.cpp:580
msgid "N/A"
msgstr "n.v.t."

#: src/slic3r/GUI/Field.cpp:175
#, c-format
msgid "%s doesn't support percentage"
msgstr "%s ondersteunt geen percentage"

#: src/slic3r/GUI/Field.cpp:195 src/slic3r/GUI/Field.cpp:226
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:376
msgid "Invalid numeric input."
msgstr "Ongeldige numerieke invoer."

#: src/slic3r/GUI/Field.cpp:204
msgid "Input value is out of range"
msgstr "Ingevoerde waarde valt buiten het bereik"

#: src/slic3r/GUI/Field.cpp:240
#, c-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""
"Wordt %s%% bedoeld in plaats van %s %s?\n"
"Selecteer JA als de waarden aangepast moeten worden naar %s%%\n"
"of NEE als %s %s is de juiste waarde."

#: src/slic3r/GUI/Field.cpp:243
msgid "Parameter validation"
msgstr "Parametervalidatie"

#: src/slic3r/GUI/FirmwareDialog.cpp:150
msgid "Flash!"
msgstr "Flash!"

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "Flashen in uitvoering. Ontkoppel de printer niet!"

#: src/slic3r/GUI/FirmwareDialog.cpp:199
msgid "Flashing failed"
msgstr "Flashen mislukt"

#: src/slic3r/GUI/FirmwareDialog.cpp:282
msgid "Flashing succeeded!"
msgstr "Flashen succesvol!"

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing failed. Please see the avrdude log below."
msgstr "Flashen mislukt. Check het AVRDUDE-logboek hieronder."

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing cancelled."
msgstr "Flashen geannuleerd."

#: src/slic3r/GUI/FirmwareDialog.cpp:332
#, c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"Dit HEX-bestand is niet geschikt voor deze printer.\n"
"Het HEX-bestand is bedoeld voor: %s\n"
"Geïdentificeerde printer: %s\n"
"\n"
"Weet u zeker dat u door wilt gaan met dit HEX-bestand?\n"
"Ga alleen door als u zeker weet dat dit juist is."

#: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454
#, c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""
"Meerdere %s apparaten gevonden. Verbind één printer per keer voor het "
"flashen."

#: src/slic3r/GUI/FirmwareDialog.cpp:436
#, c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""
"Het %s apparaat is niet gevonden.\n"
"Klik op de reset-knop naast de USB-aansluiting als het apparaat is verbonden."

#: src/slic3r/GUI/FirmwareDialog.cpp:548
#, c-format
msgid "The %s device could not have been found"
msgstr "Het %s apparaat kon niet gevonden worden"

#: src/slic3r/GUI/FirmwareDialog.cpp:645
#, c-format
msgid "Error accessing port at %s: %s"
msgstr "Fout bij het openen van de poort op %s: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:647
#, c-format
msgid "Error: %s"
msgstr "Fout: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:777
msgid "Firmware flasher"
msgstr "Firmwareflasher"

#: src/slic3r/GUI/FirmwareDialog.cpp:802
msgid "Firmware image:"
msgstr "Firmwarebestand:"

#: src/slic3r/GUI/FirmwareDialog.cpp:805 src/slic3r/GUI/Tab.cpp:1660
#: src/slic3r/GUI/Tab.cpp:1723
msgid "Browse"
msgstr "Zoek"

#: src/slic3r/GUI/FirmwareDialog.cpp:807
msgid "Serial port:"
msgstr "Seriële poort:"

#: src/slic3r/GUI/FirmwareDialog.cpp:809
msgid "Autodetected"
msgstr "Automatisch gedetecteerd"

#: src/slic3r/GUI/FirmwareDialog.cpp:810
msgid "Rescan"
msgstr "Opnieuw scannen"

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Progress:"
msgstr "Voortgang:"

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Status:"
msgstr "Status:"

#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Ready"
msgstr "Klaar"

#: src/slic3r/GUI/FirmwareDialog.cpp:841
msgid "Advanced: Output log"
msgstr "Geavanceerd: Output logboek"

#: src/slic3r/GUI/FirmwareDialog.cpp:852
#: src/slic3r/GUI/Mouse3DController.cpp:364
#: src/slic3r/GUI/PrintHostDialogs.cpp:161
msgid "Close"
msgstr "Sluit"

#: src/slic3r/GUI/FirmwareDialog.cpp:902
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"Weet u zeker dat u het firmware flashen wilt stoppen?\n"
"Dit kan er voor zorgen dat de printer onbruikbaar wordt!"

#: src/slic3r/GUI/FirmwareDialog.cpp:903
msgid "Confirmation"
msgstr "Bevestiging"

#: src/slic3r/GUI/FirmwareDialog.cpp:906
msgid "Cancelling..."
msgstr "Annuleren..."

#: src/slic3r/GUI/GLCanvas3D.cpp:234 src/slic3r/GUI/GLCanvas3D.cpp:4568
msgid "Variable layer height"
msgstr "Variabele laagdikte"

#: src/slic3r/GUI/GLCanvas3D.cpp:237
msgid "Left mouse button:"
msgstr "Linkermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:240
msgid "Add detail"
msgstr "Voeg detail toe"

#: src/slic3r/GUI/GLCanvas3D.cpp:243
msgid "Right mouse button:"
msgstr "Rechtermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:246
msgid "Remove detail"
msgstr "Verwijder detail"

#: src/slic3r/GUI/GLCanvas3D.cpp:249
msgid "Shift + Left mouse button:"
msgstr "Shift + linkermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:252
msgid "Reset to base"
msgstr "Reset"

#: src/slic3r/GUI/GLCanvas3D.cpp:255
msgid "Shift + Right mouse button:"
msgstr "Shift + rechtermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:258
msgid "Smoothing"
msgstr "Egaliseren"

#: src/slic3r/GUI/GLCanvas3D.cpp:261
msgid "Mouse wheel:"
msgstr "Scrollwieltje:"

#: src/slic3r/GUI/GLCanvas3D.cpp:264
msgid "Increase/decrease edit area"
msgstr "Vergroot/verklein bewerkgebied"

#: src/slic3r/GUI/GLCanvas3D.cpp:267
msgid "Adaptive"
msgstr "Adaptief"

#: src/slic3r/GUI/GLCanvas3D.cpp:273
msgid "Quality / Speed"
msgstr "Kwaliteit / Snelheid"

#: src/slic3r/GUI/GLCanvas3D.cpp:277
msgid "Higher print quality versus higher print speed."
msgstr "Hogere printkwaliteit tegenover een hogere printsnelheid."

#: src/slic3r/GUI/GLCanvas3D.cpp:288
msgid "Smooth"
msgstr "Egaliseer"

#: src/slic3r/GUI/GLCanvas3D.cpp:294 src/libslic3r/PrintConfig.cpp:511
msgid "Radius"
msgstr "Radius"

#: src/slic3r/GUI/GLCanvas3D.cpp:304
msgid "Keep min"
msgstr "Behoud min"

#: src/slic3r/GUI/GLCanvas3D.cpp:313
msgid "Reset"
msgstr "Reset"

#: src/slic3r/GUI/GLCanvas3D.cpp:599
msgid "Variable layer height - Manual edit"
msgstr "Variabele laagdikte - handmatig bewerken"

#: src/slic3r/GUI/GLCanvas3D.cpp:685
msgid "An object outside the print area was detected"
msgstr "Er is een object buiten het printbereik gedetecteerd"

#: src/slic3r/GUI/GLCanvas3D.cpp:686
msgid "A toolpath outside the print area was detected"
msgstr "Er is een printbeweging buiten het printbereik gedetecteerd"

#: src/slic3r/GUI/GLCanvas3D.cpp:687
msgid "SLA supports outside the print area were detected"
msgstr "Er is SLA-support buiten het printbereik gedetecteerd"

#: src/slic3r/GUI/GLCanvas3D.cpp:688
msgid "Some objects are not visible"
msgstr "Sommige objecten zijn niet zichtbaar"

#: src/slic3r/GUI/GLCanvas3D.cpp:690
msgid ""
"An object outside the print area was detected\n"
"Resolve the current problem to continue slicing"
msgstr ""
"Er is een object buiten het printbereik gedetecteerd\n"
"Los dit probleem op om door te gaan met slicen"

#: src/slic3r/GUI/GLCanvas3D.cpp:904 src/slic3r/GUI/GLCanvas3D.cpp:933
msgid "Default print color"
msgstr "Standaard printkleur"

#: src/slic3r/GUI/GLCanvas3D.cpp:934 src/slic3r/GUI/GLCanvas3D.cpp:943
#: src/slic3r/GUI/GLCanvas3D.cpp:982
msgid "Pause print or custom G-code"
msgstr "Pauzeer de print of voer custom G-code in"

#: src/slic3r/GUI/GLCanvas3D.cpp:955
#, c-format
msgid "up to %.2f mm"
msgstr "tot %.2f mm"

#: src/slic3r/GUI/GLCanvas3D.cpp:959
#, c-format
msgid "above %.2f mm"
msgstr "boven %.2f mm"

#: src/slic3r/GUI/GLCanvas3D.cpp:963
#, c-format
msgid "%.2f - %.2f mm"
msgstr "%.2f - %.2f mm"

#: src/slic3r/GUI/GLCanvas3D.cpp:990
#, c-format
msgid "Color change for Extruder %d at %.2f mm"
msgstr "Kleurwissel voor extruder %d op %.2f mm"

#: src/slic3r/GUI/GLCanvas3D.cpp:1300
msgid "Seq."
msgstr "Volgorde"

#: src/slic3r/GUI/GLCanvas3D.cpp:1696
msgid "Variable layer height - Reset"
msgstr "Variabele laagdikte - reset"

#: src/slic3r/GUI/GLCanvas3D.cpp:1704
msgid "Variable layer height - Adaptive"
msgstr "Variabele laagdikte - adaptief"

#: src/slic3r/GUI/GLCanvas3D.cpp:1712
msgid "Variable layer height - Smooth all"
msgstr "Variable laagdikte - egaliseer alles"

#: src/slic3r/GUI/GLCanvas3D.cpp:2048
msgid "Mirror Object"
msgstr "Spiegel object"

#: src/slic3r/GUI/GLCanvas3D.cpp:2916
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:573
msgid "Gizmo-Move"
msgstr "Verplaatsen"

#: src/slic3r/GUI/GLCanvas3D.cpp:2996
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:575
msgid "Gizmo-Rotate"
msgstr "Roteren"

#: src/slic3r/GUI/GLCanvas3D.cpp:3500
msgid "Move Object"
msgstr "Verplaats object"

#: src/slic3r/GUI/GLCanvas3D.cpp:4042
msgid "Undo History"
msgstr "Geschiedenis ongedaan maken"

#: src/slic3r/GUI/GLCanvas3D.cpp:4042
msgid "Redo History"
msgstr "Geschiedenis opnieuw doen"

#: src/slic3r/GUI/GLCanvas3D.cpp:4060
#, c-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] "Maak %1$d actie ongedaan"
msgstr[1] "Maak %1$d acties ongedaan"

#: src/slic3r/GUI/GLCanvas3D.cpp:4060
#, c-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] "Doe %1$d actie opnieuw"
msgstr[1] "Doe %1$d acties opnieuw"

#: src/slic3r/GUI/GLCanvas3D.cpp:4462
msgid "Add..."
msgstr "Voeg toe..."

#: src/slic3r/GUI/GLCanvas3D.cpp:4470 src/slic3r/GUI/GUI_ObjectList.cpp:1714
#: src/slic3r/GUI/Plater.cpp:3909 src/slic3r/GUI/Plater.cpp:3931
#: src/slic3r/GUI/Tab.cpp:3114
msgid "Delete"
msgstr "Verwijder"

#: src/slic3r/GUI/GLCanvas3D.cpp:4479 src/slic3r/GUI/KBShortcutsDialog.cpp:129
#: src/slic3r/GUI/Plater.cpp:4647
msgid "Delete all"
msgstr "Verwijder alles"

#: src/slic3r/GUI/GLCanvas3D.cpp:4488 src/slic3r/GUI/KBShortcutsDialog.cpp:157
#: src/slic3r/GUI/Plater.cpp:2732
msgid "Arrange"
msgstr "Schikken"

#: src/slic3r/GUI/GLCanvas3D.cpp:4488 src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Arrange selection"
msgstr "Schik selectie"

#: src/slic3r/GUI/GLCanvas3D.cpp:4500
msgid "Copy"
msgstr "Kopieer"

#: src/slic3r/GUI/GLCanvas3D.cpp:4509
msgid "Paste"
msgstr "Plak"

#: src/slic3r/GUI/GLCanvas3D.cpp:4521 src/slic3r/GUI/Plater.cpp:3766
#: src/slic3r/GUI/Plater.cpp:3778 src/slic3r/GUI/Plater.cpp:3918
msgid "Add instance"
msgstr "Voeg instantie toe"

#: src/slic3r/GUI/GLCanvas3D.cpp:4532 src/slic3r/GUI/Plater.cpp:3920
msgid "Remove instance"
msgstr "Verwijder instantie"

#: src/slic3r/GUI/GLCanvas3D.cpp:4545
msgid "Split to objects"
msgstr "Verdeel in objecten"

#: src/slic3r/GUI/GLCanvas3D.cpp:4555 src/slic3r/GUI/GUI_ObjectList.cpp:1485
msgid "Split to parts"
msgstr "Verdeel in onderdelen"

#: src/slic3r/GUI/GLCanvas3D.cpp:4619 src/slic3r/GUI/KBShortcutsDialog.cpp:130
#: src/slic3r/GUI/MainFrame.cpp:581
msgid "Undo"
msgstr "Maak ongedaan"

#: src/slic3r/GUI/GLCanvas3D.cpp:4619 src/slic3r/GUI/GLCanvas3D.cpp:4652
msgid "Click right mouse button to open History"
msgstr "Open de geschiedenis met de rechtermuisknop"

#: src/slic3r/GUI/GLCanvas3D.cpp:4636
msgid "Next Undo action: %1%"
msgstr "Volgende ongedaan maken: %1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:4652 src/slic3r/GUI/KBShortcutsDialog.cpp:131
#: src/slic3r/GUI/MainFrame.cpp:584
msgid "Redo"
msgstr "Doe opnieuw"

#: src/slic3r/GUI/GLCanvas3D.cpp:4668
msgid "Next Redo action: %1%"
msgstr "Volgende opnieuw doen: %1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:6593
msgid "Selection-Add from rectangle"
msgstr "Selectie - Voeg toe van boxselectie"

#: src/slic3r/GUI/GLCanvas3D.cpp:6612
msgid "Selection-Remove from rectangle"
msgstr "Selectie - Verwijder van boxselectie"

#: src/slic3r/GUI/GLCanvas3DManager.cpp:284
#, c-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""
"PrusaSlicer vereist een grafische driver die OpenGL 2.0 kan draaien,\n"
"terwijl OpenGL-versie %s, render %s, leverancier %s is gedetecteerd."

#: src/slic3r/GUI/GLCanvas3DManager.cpp:287
msgid "You may need to update your graphics card driver."
msgstr "U moet mogelijk uw grafische kaart updaten."

#: src/slic3r/GUI/GLCanvas3DManager.cpp:290
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw_renderer parameter."
msgstr ""
"Als oplossing kunt u PrusaSlicer draaien met een softwarematig 3D-"
"renderprogramma door prusa-slicer.exe uit te voeren met de --sw_renderer "
"parameter."

#: src/slic3r/GUI/GLCanvas3DManager.cpp:292
msgid "Unsupported OpenGL version"
msgstr "Niet-ondersteunde OpenGL-versie"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:144 src/libslic3r/PrintConfig.cpp:3402
msgid "Cut"
msgstr "Snij door"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:168
msgid "Keep upper part"
msgstr "Behoud bovenste deel"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:169
msgid "Keep lower part"
msgstr "Behoud onderste deel"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170
msgid "Rotate lower part upwards"
msgstr "Roteer onderste deel naar boven"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:175
msgid "Perform cut"
msgstr "Toepassen"

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:45
msgid "Place on face"
msgstr "Plaats op vlak"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
msgid "Hollow this object"
msgstr "Dit object uithollen"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
msgid "Preview hollowed and drilled model"
msgstr "Toon voorbeeld van uitgehold model met gat"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43
msgid "Offset"
msgstr "Shelldikte"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
msgid "Quality"
msgstr "Kwaliteit"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
#: src/libslic3r/PrintConfig.cpp:2934
msgid "Closing distance"
msgstr "Sluitafstand"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46
msgid "Hole diameter"
msgstr "Gatdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47
msgid "Hole depth"
msgstr "Gatdiepte"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48
msgid "Remove selected holes"
msgstr "Verwijder geselecteerde gaten"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49
msgid "Remove all holes"
msgstr "Verwijder alle gaten"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58
msgid "Clipping of view"
msgstr "Weergave samenvoegen"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:59
msgid "Reset direction"
msgstr "Reset-richting"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:52
msgid "Show supports"
msgstr "Toon support"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:413
msgid "Add drainage hole"
msgstr "Voeg afvoergat toe"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:530
msgid "Delete drainage hole"
msgstr "Verwijder afvoergat"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:798
msgid "Hollowing parameter change"
msgstr "Verandering van uitholparameter"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:870
msgid "Change drainage hole diameter"
msgstr "Verander afvoergatdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:960
msgid "Hollow and drill"
msgstr "Uithollen en gat toevoegen"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:1040
msgid "Move drainage hole"
msgstr "Verplaats afvoergat"

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:48
msgid "Move"
msgstr "Verplaats"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:449
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:480
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:499
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:517
#: src/libslic3r/PrintConfig.cpp:3451
msgid "Rotate"
msgstr "Roteer"

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:47
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:500
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:518
#: src/libslic3r/PrintConfig.cpp:3466
msgid "Scale"
msgstr "Verschaal"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Head diameter"
msgstr "Kopdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
msgid "Lock supports under new islands"
msgstr "Vergrendel support onder nieuwe eilanden"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1350
msgid "Remove selected points"
msgstr "Verwijder geselecteerde punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
msgid "Remove all points"
msgstr "Verwijdere alle punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1353
msgid "Apply changes"
msgstr "Wijzigingen toepassen"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1354
msgid "Discard changes"
msgstr "Wijzigingen afwijzen"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
msgid "Minimal points distance"
msgstr "Minimale puntafstand"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55
#: src/libslic3r/PrintConfig.cpp:2764
msgid "Support points density"
msgstr "Dichtheid van supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1356
msgid "Auto-generate points"
msgstr "Genereer automatisch punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
msgid "Manual editing"
msgstr "Handmatig bewerken"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:479
msgid "Add support point"
msgstr "Voeg supportpunt toe"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:615
msgid "Delete support point"
msgstr "Verwijder supportpunt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:804
msgid "Change point head diameter"
msgstr "Wijzig puntkopdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:872
msgid "Support parameter change"
msgstr "Wijzig supportparameter"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:978
msgid "SLA Support Points"
msgstr "SLA-supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:999
msgid "SLA gizmo turned on"
msgstr "SLA Gizmo aangezet"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1024
msgid "Do you want to save your manually edited support points?"
msgstr "Wilt u handmatig aangepaste supportpunten opslaan?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1025
msgid "Save changes?"
msgstr "Wijzigingen opslaan?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1037
msgid "SLA gizmo turned off"
msgstr "SLA Gizmo uitgezet"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1076
msgid "Move support point"
msgstr "Verplaats supportpunt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1175
msgid "Support points edit"
msgstr "Bewerk supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1247
msgid "Autogeneration will erase all manually edited points."
msgstr ""
"Automatisch genereren zal alle handmatig aangepaste punten verwijderen."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1248
msgid "Are you sure you want to do it?"
msgstr "Weet u zeker dat u dit wilt doen?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1249 src/slic3r/GUI/GUI.cpp:246
#: src/slic3r/GUI/Tab.cpp:3074 src/slic3r/GUI/WipeTowerDialog.cpp:45
#: src/slic3r/GUI/WipeTowerDialog.cpp:366
msgid "Warning"
msgstr "Waarschuwing"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1252
msgid "Autogenerate support points"
msgstr "Automatisch gegenereerde supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1313
msgid "SLA gizmo keyboard shortcuts"
msgstr "SLA sneltoetsen"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1324
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr "Let op: sommige sneltoetsen werken alleen in bewerkmodus."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1342
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1345
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1346
msgid "Left click"
msgstr "Linkermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1342
msgid "Add point"
msgstr "Voeg punt toe"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1343
msgid "Right click"
msgstr "Rechtermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1343
msgid "Remove point"
msgstr "Verwijder punt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1344
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1347
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1348
msgid "Drag"
msgstr "Versleep"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1344
msgid "Move point"
msgstr "Verplaats punt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1345
msgid "Add point to selection"
msgstr "Voeg punt toe aan selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1346
msgid "Remove point from selection"
msgstr "Verwijder punt uit selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1347
msgid "Select by rectangle"
msgstr "Selecteer met boxselectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1348
msgid "Deselect by rectangle"
msgstr "Deselecteer met boxselectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1349
msgid "Select all points"
msgstr "Selecteer alle punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1351
msgid "Mouse wheel"
msgstr "Scrollwieltje"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1351
msgid "Move clipping plane"
msgstr "Verplaats snijvlak"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1352
msgid "Reset clipping plane"
msgstr "Reset snijvlak"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1355
msgid "Switch to editing mode"
msgstr "Schakel over naar bewerkmodus"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:500
msgid "Gizmo-Place on Face"
msgstr "Plaats op vlak"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:574
msgid "Gizmo-Scale"
msgstr "Verschalen"

#: src/slic3r/GUI/GUI_App.cpp:138
#, c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""
"%s veroorzaakte een fout. Dit komt mogelijk door een geheugentekort. Als u "
"zeker weet dat u genoeg RAM-geheugen heeft, kan dit ook een andere fout "
"zijn. We waarderen het als u dit meldt.\n"
"\n"
"Het programma zal nu afsluiten."

#: src/slic3r/GUI/GUI_App.cpp:141
msgid "Fatal error"
msgstr "Fatale fout"

#: src/slic3r/GUI/GUI_App.cpp:442
msgid "Changing of an application language"
msgstr "Veranderen van de taal van het programma"

#: src/slic3r/GUI/GUI_App.cpp:450 src/slic3r/GUI/GUI_App.cpp:459
msgid "Recreating"
msgstr "Opnieuw aanmaken"

#: src/slic3r/GUI/GUI_App.cpp:466
msgid "Loading of current presets"
msgstr "Laden van huidige presets"

#: src/slic3r/GUI/GUI_App.cpp:474
msgid "Loading of a mode view"
msgstr "Laden van de weergavemodus"

#: src/slic3r/GUI/GUI_App.cpp:555
msgid "Choose one file (3MF/AMF):"
msgstr "Kies een 3MF- of AMF-bestand:"

#: src/slic3r/GUI/GUI_App.cpp:567
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Kies één of meer STL-, OBJ-, AMF-, 3MF-, of PRUSA-bestanden:"

#: src/slic3r/GUI/GUI_App.cpp:629
msgid "Select the language"
msgstr "Selecteer taal"

#: src/slic3r/GUI/GUI_App.cpp:629
msgid "Language"
msgstr "Taal"

#: src/slic3r/GUI/GUI_App.cpp:797
#, c-format
msgid "Run %s"
msgstr "Voer %s uit"

#: src/slic3r/GUI/GUI_App.cpp:800
msgid "&Configuration Snapshots"
msgstr "Configuratiesnapshots"

#: src/slic3r/GUI/GUI_App.cpp:800
msgid "Inspect / activate configuration snapshots"
msgstr "Inspecteer/activeer configuratiesnapshots"

#: src/slic3r/GUI/GUI_App.cpp:801
msgid "Take Configuration &Snapshot"
msgstr "Neem configuratiesnapshot"

#: src/slic3r/GUI/GUI_App.cpp:801
msgid "Capture a configuration snapshot"
msgstr "Neem een configuratiesnapshot op"

#: src/slic3r/GUI/GUI_App.cpp:802
msgid "Check for updates"
msgstr "Controleer op updates"

#: src/slic3r/GUI/GUI_App.cpp:802
msgid "Check for configuration updates"
msgstr "Controleer op configuratie-updates"

#: src/slic3r/GUI/GUI_App.cpp:804
msgid "&Preferences"
msgstr "Voorkeuren"

#: src/slic3r/GUI/GUI_App.cpp:810
msgid "Application preferences"
msgstr "Programmavoorkeuren"

#: src/slic3r/GUI/GUI_App.cpp:813 src/slic3r/GUI/wxExtensions.cpp:753
msgid "Simple"
msgstr "Eenvoudig"

#: src/slic3r/GUI/GUI_App.cpp:813
msgid "Simple View Mode"
msgstr "Eenvoudige weergave"

#: src/slic3r/GUI/GUI_App.cpp:814 src/slic3r/GUI/GUI_ObjectList.cpp:102
#: src/slic3r/GUI/GUI_ObjectList.cpp:620 src/slic3r/GUI/Tab.cpp:1089
#: src/slic3r/GUI/Tab.cpp:1104 src/slic3r/GUI/Tab.cpp:1203
#: src/slic3r/GUI/Tab.cpp:1206 src/slic3r/GUI/Tab.cpp:1472
#: src/slic3r/GUI/Tab.cpp:1969 src/slic3r/GUI/Tab.cpp:3651
#: src/slic3r/GUI/wxExtensions.cpp:754 src/libslic3r/PrintConfig.cpp:88
#: src/libslic3r/PrintConfig.cpp:119 src/libslic3r/PrintConfig.cpp:223
#: src/libslic3r/PrintConfig.cpp:1037 src/libslic3r/PrintConfig.cpp:2276
#: src/libslic3r/PrintConfig.cpp:2448
msgid "Advanced"
msgstr "Geavanceerd"

#: src/slic3r/GUI/GUI_App.cpp:814
msgid "Advanced View Mode"
msgstr "Geavanceerde weergave"

#: src/slic3r/GUI/GUI_App.cpp:815 src/slic3r/GUI/wxExtensions.cpp:755
msgid "Expert"
msgstr "Expert"

#: src/slic3r/GUI/GUI_App.cpp:815
msgid "Expert View Mode"
msgstr "Expertweergave"

#: src/slic3r/GUI/GUI_App.cpp:820
msgid "Mode"
msgstr "Modus"

#: src/slic3r/GUI/GUI_App.cpp:820
#, c-format
msgid "%s View Mode"
msgstr "%s-weergavemodus"

#: src/slic3r/GUI/GUI_App.cpp:822
msgid "&Language"
msgstr "Taal"

#: src/slic3r/GUI/GUI_App.cpp:824
msgid "Flash printer &firmware"
msgstr "Flash printerfirmware"

#: src/slic3r/GUI/GUI_App.cpp:824
msgid "Upload a firmware image into an Arduino based printer"
msgstr "Upload een firmwarebestand op een Arduino-gebaseerde printer"

#: src/slic3r/GUI/GUI_App.cpp:839
msgid "Taking configuration snapshot"
msgstr "Neem configuratiesnapshot"

#: src/slic3r/GUI/GUI_App.cpp:839
msgid "Snapshot name"
msgstr "Snapshotnaam"

#: src/slic3r/GUI/GUI_App.cpp:882
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""
"Het veranderen van de taal zorgt dat het programma opnieuw opstart.\n"
"U verliest de geladen inhoud zoals getoond in de 3D-weergave."

#: src/slic3r/GUI/GUI_App.cpp:884
msgid "Do you want to proceed?"
msgstr "Weet u zeker dat u door wilt gaan?"

#: src/slic3r/GUI/GUI_App.cpp:885
msgid "Language selection"
msgstr "Taalselectie"

#: src/slic3r/GUI/GUI_App.cpp:908
msgid "&Configuration"
msgstr "Configuratie"

#: src/slic3r/GUI/GUI_App.cpp:932
msgid "The presets on the following tabs were modified"
msgstr "De instellingen in de volgende tabs zijn aangepast"

#: src/slic3r/GUI/GUI_App.cpp:932 src/slic3r/GUI/Tab.cpp:2936
msgid "Discard changes and continue anyway?"
msgstr "Wijzigingen afwijzen en doorgaan?"

#: src/slic3r/GUI/GUI_App.cpp:935
msgid "Unsaved Presets"
msgstr "Niet-opgeslagen presets"

#: src/slic3r/GUI/GUI_App.cpp:1084 src/slic3r/GUI/Tab.cpp:2948
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr ""
"Het is niet mogelijk meerdelige objecten te printen met de SLA-technologie."

#: src/slic3r/GUI/GUI_App.cpp:1085
msgid "Please check and fix your object list."
msgstr "Controleer en repareer de objectenlijst."

#: src/slic3r/GUI/GUI_App.cpp:1086 src/slic3r/GUI/Plater.cpp:2291
#: src/slic3r/GUI/Tab.cpp:2950
msgid "Attention!"
msgstr "Attentie!"

#: src/slic3r/GUI/GUI_App.cpp:1103
msgid "Select a gcode file:"
msgstr "Selecteer een gcode-bestand:"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
msgid "Start at height"
msgstr "Start op hoogte"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
msgid "Stop at height"
msgstr "Stop op hoogte"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:153
msgid "Remove layer range"
msgstr "Verwijder laagbereik"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:162
msgid "Add layer range"
msgstr "Voeg laagbereik toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:93
#: src/slic3r/GUI/GUI_ObjectList.cpp:611 src/libslic3r/PrintConfig.cpp:72
#: src/libslic3r/PrintConfig.cpp:175 src/libslic3r/PrintConfig.cpp:184
#: src/libslic3r/PrintConfig.cpp:408 src/libslic3r/PrintConfig.cpp:470
#: src/libslic3r/PrintConfig.cpp:478 src/libslic3r/PrintConfig.cpp:890
#: src/libslic3r/PrintConfig.cpp:1075 src/libslic3r/PrintConfig.cpp:1374
#: src/libslic3r/PrintConfig.cpp:1441 src/libslic3r/PrintConfig.cpp:1622
#: src/libslic3r/PrintConfig.cpp:2074 src/libslic3r/PrintConfig.cpp:2133
#: src/libslic3r/PrintConfig.cpp:2142
msgid "Layers and Perimeters"
msgstr "Lagen en perimeters"

#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95
#: src/slic3r/GUI/GUI_ObjectList.cpp:613 src/slic3r/GUI/GUI_Preview.cpp:246
#: src/slic3r/GUI/Tab.cpp:1122 src/slic3r/GUI/Tab.cpp:1123
#: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/PrintConfig.cpp:370
#: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1866
#: src/libslic3r/PrintConfig.cpp:1872 src/libslic3r/PrintConfig.cpp:1880
#: src/libslic3r/PrintConfig.cpp:1892 src/libslic3r/PrintConfig.cpp:1902
#: src/libslic3r/PrintConfig.cpp:1910 src/libslic3r/PrintConfig.cpp:1925
#: src/libslic3r/PrintConfig.cpp:1946 src/libslic3r/PrintConfig.cpp:1958
#: src/libslic3r/PrintConfig.cpp:1974 src/libslic3r/PrintConfig.cpp:1983
#: src/libslic3r/PrintConfig.cpp:1992 src/libslic3r/PrintConfig.cpp:2003
#: src/libslic3r/PrintConfig.cpp:2017 src/libslic3r/PrintConfig.cpp:2025
#: src/libslic3r/PrintConfig.cpp:2026 src/libslic3r/PrintConfig.cpp:2035
#: src/libslic3r/PrintConfig.cpp:2043 src/libslic3r/PrintConfig.cpp:2057
msgid "Support material"
msgstr "Support"

#: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99
#: src/slic3r/GUI/GUI_ObjectList.cpp:617 src/libslic3r/PrintConfig.cpp:2252
#: src/libslic3r/PrintConfig.cpp:2260
msgid "Wipe options"
msgstr "Afveegopties"

#: src/slic3r/GUI/GUI_ObjectList.cpp:45
msgid "Pad and Support"
msgstr "Basisplaat en support"

#: src/slic3r/GUI/GUI_ObjectList.cpp:51
msgid "Add part"
msgstr "Voeg onderdeel toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:52
msgid "Add modifier"
msgstr "Voeg modificator toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:53
msgid "Add support enforcer"
msgstr "Voeg supportforcering toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:54
msgid "Add support blocker"
msgstr "Voeg supportblokkering toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:614
#: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/Tab.cpp:1147
#: src/libslic3r/PrintConfig.cpp:235 src/libslic3r/PrintConfig.cpp:458
#: src/libslic3r/PrintConfig.cpp:919 src/libslic3r/PrintConfig.cpp:1048
#: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1668
#: src/libslic3r/PrintConfig.cpp:1716 src/libslic3r/PrintConfig.cpp:1768
#: src/libslic3r/PrintConfig.cpp:2118
msgid "Speed"
msgstr "Snelheid"

#: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:615
#: src/slic3r/GUI/Tab.cpp:1182 src/slic3r/GUI/Tab.cpp:1840
#: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:1002
#: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1737
#: src/libslic3r/PrintConfig.cpp:1938 src/libslic3r/PrintConfig.cpp:1965
msgid "Extruders"
msgstr "Extruders"

#: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:616
#: src/libslic3r/PrintConfig.cpp:447 src/libslic3r/PrintConfig.cpp:555
#: src/libslic3r/PrintConfig.cpp:877 src/libslic3r/PrintConfig.cpp:1010
#: src/libslic3r/PrintConfig.cpp:1418 src/libslic3r/PrintConfig.cpp:1757
#: src/libslic3r/PrintConfig.cpp:1947 src/libslic3r/PrintConfig.cpp:2106
msgid "Extrusion Width"
msgstr "Extrusiebreedte"

#: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:622
#: src/slic3r/GUI/Plater.cpp:490 src/slic3r/GUI/Tab.cpp:3594
#: src/slic3r/GUI/Tab.cpp:3595 src/libslic3r/PrintConfig.cpp:2614
#: src/libslic3r/PrintConfig.cpp:2621 src/libslic3r/PrintConfig.cpp:2630
#: src/libslic3r/PrintConfig.cpp:2639 src/libslic3r/PrintConfig.cpp:2649
#: src/libslic3r/PrintConfig.cpp:2675 src/libslic3r/PrintConfig.cpp:2682
#: src/libslic3r/PrintConfig.cpp:2693 src/libslic3r/PrintConfig.cpp:2703
#: src/libslic3r/PrintConfig.cpp:2712 src/libslic3r/PrintConfig.cpp:2725
#: src/libslic3r/PrintConfig.cpp:2735 src/libslic3r/PrintConfig.cpp:2744
#: src/libslic3r/PrintConfig.cpp:2754 src/libslic3r/PrintConfig.cpp:2765
#: src/libslic3r/PrintConfig.cpp:2773
msgid "Supports"
msgstr "Support"

#: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:623
#: src/slic3r/GUI/Plater.cpp:630 src/slic3r/GUI/Tab.cpp:3626
#: src/slic3r/GUI/Tab.cpp:3627 src/libslic3r/PrintConfig.cpp:2781
#: src/libslic3r/PrintConfig.cpp:2788 src/libslic3r/PrintConfig.cpp:2802
#: src/libslic3r/PrintConfig.cpp:2813 src/libslic3r/PrintConfig.cpp:2823
#: src/libslic3r/PrintConfig.cpp:2845 src/libslic3r/PrintConfig.cpp:2856
#: src/libslic3r/PrintConfig.cpp:2863 src/libslic3r/PrintConfig.cpp:2870
#: src/libslic3r/PrintConfig.cpp:2881 src/libslic3r/PrintConfig.cpp:2890
#: src/libslic3r/PrintConfig.cpp:2899
msgid "Pad"
msgstr "Basisplaat"

#: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:3644
#: src/slic3r/GUI/Tab.cpp:3645 src/libslic3r/SLA/Hollowing.cpp:46
#: src/libslic3r/SLA/Hollowing.cpp:58 src/libslic3r/SLA/Hollowing.cpp:67
#: src/libslic3r/SLA/Hollowing.cpp:76 src/libslic3r/PrintConfig.cpp:2909
#: src/libslic3r/PrintConfig.cpp:2916 src/libslic3r/PrintConfig.cpp:2926
#: src/libslic3r/PrintConfig.cpp:2935
msgid "Hollowing"
msgstr "Uithollen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:268
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153
msgid "Name"
msgstr "Naam"

#: src/slic3r/GUI/GUI_ObjectList.cpp:276 src/slic3r/GUI/Tab.cpp:1436
#: src/slic3r/GUI/wxExtensions.cpp:598 src/libslic3r/PrintConfig.cpp:487
msgid "Extruder"
msgstr "Extruder"

#: src/slic3r/GUI/GUI_ObjectList.cpp:280 src/slic3r/GUI/GUI_ObjectList.cpp:392
msgid "Editing"
msgstr "Bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:337
#, c-format
msgid "Auto-repaired (%d errors):"
msgstr "Automatisch gerepareerd (%d fouten):"

#: src/slic3r/GUI/GUI_ObjectList.cpp:344
msgid "degenerate facets"
msgstr "vlakken gedegenereerd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:345
msgid "edges fixed"
msgstr "randen vastgezet"

#: src/slic3r/GUI/GUI_ObjectList.cpp:346
msgid "facets removed"
msgstr "vlakken verwijderd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:347
msgid "facets added"
msgstr "vlakken toegevoegd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:348
msgid "facets reversed"
msgstr "vlakken omgekeerd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:349
msgid "backwards edges"
msgstr "omgekeerde lijnen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:357
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""
"Rechtermuisklik op het pictogram om het STL-bestand met NetFabb te repareren"

#: src/slic3r/GUI/GUI_ObjectList.cpp:394
msgid "Right button click the icon to change the object settings"
msgstr "Rechtermuisklik op het icoontje om de objectinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:396
msgid "Click the icon to change the object settings"
msgstr "Klik op het pictogram om de objectinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:400
msgid "Right button click the icon to change the object printable property"
msgstr "Rechtermuisklik op het pictogram om de printinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:402
msgid "Click the icon to change the object printable property"
msgstr "Klik op het pictogram om de printinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:455 src/slic3r/GUI/GUI_ObjectList.cpp:467
#: src/slic3r/GUI/GUI_ObjectList.cpp:915 src/slic3r/GUI/GUI_ObjectList.cpp:3961
#: src/slic3r/GUI/GUI_ObjectList.cpp:3971
#: src/slic3r/GUI/GUI_ObjectList.cpp:4006
#: src/slic3r/GUI/ObjectDataViewModel.cpp:200
#: src/slic3r/GUI/ObjectDataViewModel.cpp:257
#: src/slic3r/GUI/ObjectDataViewModel.cpp:282
#: src/slic3r/GUI/ObjectDataViewModel.cpp:490
#: src/slic3r/GUI/ObjectDataViewModel.cpp:1725
msgid "default"
msgstr "standaard"

#: src/slic3r/GUI/GUI_ObjectList.cpp:534
msgid "Change Extruder"
msgstr "Wijzig extruder"

#: src/slic3r/GUI/GUI_ObjectList.cpp:549
msgid "Rename Object"
msgstr "Hernoem object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:549
msgid "Rename Sub-object"
msgstr "Hernoem subobject"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1089
#: src/slic3r/GUI/GUI_ObjectList.cpp:3777
msgid "Instances to Separated Objects"
msgstr "Zet instanties om in objecten"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1104
msgid "Volumes in Object reordered"
msgstr "Volumes in object opnieuw geordend"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1104
msgid "Object reordered"
msgstr "Object opnieuw geordend"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1180
#: src/slic3r/GUI/GUI_ObjectList.cpp:1528
#: src/slic3r/GUI/GUI_ObjectList.cpp:1534
#: src/slic3r/GUI/GUI_ObjectList.cpp:1845
#, c-format
msgid "Quick Add Settings (%s)"
msgstr "Snel instellingen toevoegen (%s)"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1263
msgid "Select showing settings"
msgstr "Selecteer getoonde instellingen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1312
msgid "Add Settings for Layers"
msgstr "Voeg laaginstellingen toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1313
msgid "Add Settings for Sub-object"
msgstr "Voeg instellingen voor subobject toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1314
msgid "Add Settings for Object"
msgstr "Voeg instellingen voor object toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1384
msgid "Add Settings Bundle for Height range"
msgstr "Voeg instellingen voor hoogtebereik toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1385
msgid "Add Settings Bundle for Sub-object"
msgstr "Voeg instellingen voor subobject toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1386
msgid "Add Settings Bundle for Object"
msgstr "Voeg instellingen voor een object toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1425
msgid "Load"
msgstr "Laad"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
#: src/slic3r/GUI/GUI_ObjectList.cpp:1462
#: src/slic3r/GUI/GUI_ObjectList.cpp:1466
msgid "Box"
msgstr "Blok"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Cylinder"
msgstr "Cilinder"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Sphere"
msgstr "Bol"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Slab"
msgstr "Plaat"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1498
msgid "Height range Modifier"
msgstr "Modificator voor hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1507
msgid "Add settings"
msgstr "Voeg instellingen toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1585
msgid "Change type"
msgstr "Wijzig type"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1595
#: src/slic3r/GUI/GUI_ObjectList.cpp:1607
msgid "Set as a Separated Object"
msgstr "Stel in als apart object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1607
msgid "Set as a Separated Objects"
msgstr "Stel in als aparte objecten"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1617
msgid "Printable"
msgstr "Printbaar"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1632
msgid "Rename"
msgstr "Hernoem"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1643
msgid "Fix through the Netfabb"
msgstr "Repareer met NetFabb"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1653 src/slic3r/GUI/Plater.cpp:3944
msgid "Export as STL"
msgstr "Exporteer als STL-bestand"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1660
#: src/slic3r/GUI/GUI_ObjectList.cpp:3950 src/slic3r/GUI/Plater.cpp:3912
msgid "Reload the selected volumes from disk"
msgstr "Herlaad de geselecteerde volumes vanaf schijf"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1667
msgid "Set extruder for selected items"
msgstr "Stel extruder in voor de geselecteerde items"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1700 src/libslic3r/PrintConfig.cpp:335
msgid "Default"
msgstr "Standaard"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1720
msgid "Scale to print volume"
msgstr "Verschaal tot printvolume"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1720
msgid "Scale the selected object to fit the print volume"
msgstr "Verschaal het geselecteerde object tot deze in het printvolume past"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1789
#: src/slic3r/GUI/GUI_ObjectList.cpp:2047
msgid "Add Shape"
msgstr "Voeg vorm toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1875
msgid "Load Part"
msgstr "Laad onderdeel"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1914
msgid "Error!"
msgstr "Fout!"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1989
msgid "Add Generic Subobject"
msgstr "Voeg algemene subobjecten toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2018
msgid "Generic"
msgstr "Algemeen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2136
#: src/slic3r/GUI/GUI_ObjectList.cpp:2238
msgid "Last instance of an object cannot be deleted."
msgstr "Laatste instantie van een object kan niet verwijderd worden."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2148
msgid "Delete Settings"
msgstr "Verwijder instellingen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2172
msgid "Delete All Instances from Object"
msgstr "Verwijder alle instanties van het object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2188
msgid "Delete Height Range"
msgstr "Verwijder hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2219
msgid "From Object List You can't delete the last solid part from object."
msgstr "Het laatste onderdeel van de objectenlijst kan niet verwijderd worden."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2223
msgid "Delete Subobject"
msgstr "Verwijder subobject"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2242
msgid "Delete Instance"
msgstr "Verwijder instantie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2266 src/slic3r/GUI/Plater.cpp:2956
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""
"Het geselecteerde object kan niet opgedeeld worden omdat het maar één "
"geometrie bevat."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2270
msgid "Split to Parts"
msgstr "Splits naar onderdelen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2324
msgid "Add Layers"
msgstr "Voeg lagen toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2450
msgid "Group manipulation"
msgstr "Groep bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2462
msgid "Object manipulation"
msgstr "Object bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2475
msgid "Object Settings to modify"
msgstr "Objectinstellingen om te bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2479
msgid "Part Settings to modify"
msgstr "Onderdeelinstellingen om te bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2484
msgid "Layer range Settings to modify"
msgstr "Laagbereikinstellingen om te bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2490
msgid "Part manipulation"
msgstr "Onderdeel bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2496
msgid "Instance manipulation"
msgstr "Instantie bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2503
msgid "Height ranges"
msgstr "Hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2503
msgid "Settings for height range"
msgstr "Instellingen voor hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2689
msgid "Delete Selected Item"
msgstr "Verwijder geselecteerd item"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2826
msgid "Delete Selected"
msgstr "Verwijder selectie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2892
#: src/slic3r/GUI/GUI_ObjectList.cpp:2921
#: src/slic3r/GUI/GUI_ObjectList.cpp:2939
msgid "Add Height Range"
msgstr "Voeg hoogtebereik toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2999
msgid "Edit Height Range"
msgstr "Bewerk hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3287
msgid "Selection-Remove from list"
msgstr "Selectie - Verwijder van lijst"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3295
msgid "Selection-Add from list"
msgstr "Selectie - Voeg toe aan lijst"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3413
msgid "Object or Instance"
msgstr "Object of instantie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3414
#: src/slic3r/GUI/GUI_ObjectList.cpp:3547
msgid "Part"
msgstr "Onderdeel"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3414
msgid "Layer"
msgstr "Laag"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3416
msgid "Unsupported selection"
msgstr "Niet-ondersteunde selectie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3417
#, c-format
msgid "You started your selection with %s Item."
msgstr "De selectie is gestart met item %s."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3418
#, c-format
msgid "In this mode you can select only other %s Items%s"
msgstr "In deze modus kunt u alleen andere %s items %s selecteren"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3421
msgid "of a current Object"
msgstr "van het huidige object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3426
#: src/slic3r/GUI/GUI_ObjectList.cpp:3501 src/slic3r/GUI/Plater.cpp:141
msgid "Info"
msgstr "Info"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3542
msgid "You can't change a type of the last solid part of the object."
msgstr ""
"U kunt het type van het laatste onderdeel van een object niet wijzigen."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3547
msgid "Modifier"
msgstr "Modificator"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3547
msgid "Support Enforcer"
msgstr "Supportforcering"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3547
msgid "Support Blocker"
msgstr "Supportblokkering"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3549
msgid "Select type of part"
msgstr "Selecteer onderdeeltype"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3554
msgid "Change Part Type"
msgstr "Wijzig onderdeeltype"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3799
msgid "Enter new name"
msgstr "Voer nieuwe naam in"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3799
msgid "Renaming"
msgstr "Hernoemen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3815
#: src/slic3r/GUI/GUI_ObjectList.cpp:3922 src/slic3r/GUI/Tab.cpp:3446
#: src/slic3r/GUI/Tab.cpp:3450
msgid "The supplied name is not valid;"
msgstr "De ingevoerde naam is niet geldig;"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3816
#: src/slic3r/GUI/GUI_ObjectList.cpp:3923 src/slic3r/GUI/Tab.cpp:3447
msgid "the following characters are not allowed:"
msgstr "de volgende karakters zijn niet toegestaan:"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3965
msgid "Select extruder number:"
msgstr "Selecteer extrudernummer:"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3966
msgid "This extruder will be set for selected items"
msgstr "Deze extruder wordt ingesteld voor de geselecteerde items"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3991
msgid "Change Extruders"
msgstr "Wijzig extruders"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4088 src/slic3r/GUI/Selection.cpp:1474
msgid "Set Printable"
msgstr "Stel in op printbaar"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4088 src/slic3r/GUI/Selection.cpp:1474
msgid "Set Unprintable"
msgstr "Stel in op niet-printbaar"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:105
msgid "World coordinates"
msgstr "Wereldcoördinaten"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:106
msgid "Local coordinates"
msgstr "Lokale coördinaten"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:82
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""
"Stel een coördinatenstelsel in. Hierin wordt de verandering uitgevoerd."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155 src/libslic3r/GCode.cpp:638
msgid "Object name"
msgstr "Objectnaam"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:215
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:457
msgid "Position"
msgstr "Positie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:458
#: src/slic3r/GUI/Mouse3DController.cpp:304
#: src/slic3r/GUI/Mouse3DController.cpp:321
msgid "Rotation"
msgstr "Rotatie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:263
#, c-format
msgid "Toggle %c axis mirroring"
msgstr "Zet %c-asspiegeling aan"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:297
msgid "Set Mirror"
msgstr "Stel spiegeling in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:337
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349
msgid "Drop to bed"
msgstr "Plaats op het bed"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363
msgid "Reset rotation"
msgstr "Reset rotatie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385
msgid "Reset Rotation"
msgstr "Reset rotatie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:397
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399
msgid "Reset scale"
msgstr "Reset verschaling"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:459
msgid "Scale factors"
msgstr "Verschalingsfactoren"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:516
msgid "Translate"
msgstr "Verplaats"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""
"Niet-gelijke verschaling kan niet gebruikt worden voor meerdere objecten of "
"onderdelen"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:750
msgid "Set Position"
msgstr "Stel positie in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:781
msgid "Set Orientation"
msgstr "Stel oriëntatie in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:846
msgid "Set Scale"
msgstr "Stel verschaling in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:875
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""
"Het huidige aangepaste object is gekanteld (rotatiehoeken zijn geen "
"veelvouden van 90°).\n"
"Niet-gelijke verschaling van gekantelde objecten is alleen mogelijk in het "
"wereldcoördinatensysteem\n"
"als de rotatie is ingebouwd in de objectcoördinaten."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:878
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""
"Deze bewerking werkt onomkeerbaar.\n"
"Weet u zeker dat u wilt doorgaan?"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:59
msgid "Additional Settings"
msgstr "Extra instellingen"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:95
msgid "Remove parameter"
msgstr "Verwijder parameter"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:101
#, c-format
msgid "Delete Option %s"
msgstr "Verwijder optie %s"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
#, c-format
msgid "Change Option %s"
msgstr "Wijzig optie %s"

#: src/slic3r/GUI/GUI_Preview.cpp:218
msgid "View"
msgstr "Weergave"

#: src/slic3r/GUI/GUI_Preview.cpp:221 src/slic3r/GUI/GUI_Preview.cpp:575
#: src/libslic3r/GCode/PreviewData.cpp:345
msgid "Feature type"
msgstr "Objecttype"

#: src/slic3r/GUI/GUI_Preview.cpp:222 src/libslic3r/PrintConfig.cpp:500
msgid "Height"
msgstr "Hoogte"

#: src/slic3r/GUI/GUI_Preview.cpp:223 src/libslic3r/PrintConfig.cpp:2238
msgid "Width"
msgstr "Breedte"

#: src/slic3r/GUI/GUI_Preview.cpp:225 src/slic3r/GUI/Tab.cpp:1459
msgid "Fan speed"
msgstr "Ventilatorsnelheid"

#: src/slic3r/GUI/GUI_Preview.cpp:226
msgid "Volumetric flow rate"
msgstr "Volumetrisch debiet"

#: src/slic3r/GUI/GUI_Preview.cpp:227 src/slic3r/GUI/GUI_Preview.cpp:335
#: src/slic3r/GUI/GUI_Preview.cpp:519 src/slic3r/GUI/GUI_Preview.cpp:574
#: src/slic3r/GUI/GUI_Preview.cpp:835 src/libslic3r/GCode/PreviewData.cpp:357
msgid "Tool"
msgstr "Tool"

#: src/slic3r/GUI/GUI_Preview.cpp:228 src/slic3r/GUI/GUI_Preview.cpp:572
#: src/libslic3r/GCode/PreviewData.cpp:359
msgid "Color Print"
msgstr "Kleurenprint"

#: src/slic3r/GUI/GUI_Preview.cpp:231
msgid "Show"
msgstr "Toon"

#: src/slic3r/GUI/GUI_Preview.cpp:234 src/slic3r/GUI/GUI_Preview.cpp:235
msgid "Feature types"
msgstr "Featuretypes"

#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/ExtrusionEntity.cpp:310
msgid "Perimeter"
msgstr "Perimeter"

#: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:311
msgid "External perimeter"
msgstr "Buitenste perimeter"

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:312
msgid "Overhang perimeter"
msgstr "Overhangende perimeter"

#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:313
msgid "Internal infill"
msgstr "Inwendige vulling"

#: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:314
#: src/libslic3r/PrintConfig.cpp:1756 src/libslic3r/PrintConfig.cpp:1767
msgid "Solid infill"
msgstr "Dichte vulling"

#: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:315
#: src/libslic3r/PrintConfig.cpp:2105 src/libslic3r/PrintConfig.cpp:2117
msgid "Top solid infill"
msgstr "Bovenste dichte vulling"

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:316
msgid "Bridge infill"
msgstr "Brugvulling"

#: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:317
#: src/libslic3r/PrintConfig.cpp:918
msgid "Gap fill"
msgstr "Gatenvulling"

#: src/slic3r/GUI/GUI_Preview.cpp:245 src/slic3r/GUI/Tab.cpp:1113
#: src/libslic3r/ExtrusionEntity.cpp:318
msgid "Skirt"
msgstr "Skirt"

#: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/ExtrusionEntity.cpp:320
#: src/libslic3r/PrintConfig.cpp:1991
msgid "Support material interface"
msgstr "Supportinterface"

#: src/slic3r/GUI/GUI_Preview.cpp:248 src/slic3r/GUI/Tab.cpp:1193
#: src/libslic3r/ExtrusionEntity.cpp:321
msgid "Wipe tower"
msgstr "Afveegblok"

#: src/slic3r/GUI/GUI_Preview.cpp:253 src/libslic3r/PrintConfig.cpp:2152
msgid "Travel"
msgstr "Beweging"

#: src/slic3r/GUI/GUI_Preview.cpp:254
msgid "Retractions"
msgstr "Retracties"

#: src/slic3r/GUI/GUI_Preview.cpp:255
msgid "Unretractions"
msgstr "Deretracties"

#: src/slic3r/GUI/GUI_Preview.cpp:256
msgid "Shells"
msgstr "Shells"

#: src/slic3r/GUI/GUI_Preview.cpp:257
msgid "Legend"
msgstr "Legenda"

#: src/slic3r/GUI/Job.hpp:123
msgid "ERROR: not enough resources to execute a new job."
msgstr "Fout: niet genoeg middelen om nieuwe job te starten."

#: src/slic3r/GUI/KBShortcutsDialog.cpp:41 src/slic3r/GUI/MainFrame.cpp:708
msgid "Keyboard Shortcuts"
msgstr "Sneltoetsen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "New project, clear plater"
msgstr "Nieuw project, verwijder huidige modellen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
msgstr ""
"Open STL-, OBJ-, AMF- of 3MF-project met configuratie, verwijder huidige "
"modellen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
msgid "Save project (3mf)"
msgstr "3MF-project opslaan"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
msgid "Save project as (3mf)"
msgstr "3MF-project opslaan als"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
msgid "(Re)slice"
msgstr "(Her)slice"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
msgstr ""
"Importeer STL-, OBJ-, AMF- of 3MF-bestanden zonder configuratie en behoud "
"modellen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Import Config from ini/amf/3mf/gcode"
msgstr "Importeer configuratie van INI-, AMF-, 3MF- of gcode-bestanden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""
"Laad configuratie van INI-, AMF-, 3MF- of gcode-bestanden en voeg samen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122 src/slic3r/GUI/Plater.cpp:886
#: src/slic3r/GUI/Plater.cpp:5496 src/libslic3r/PrintConfig.cpp:3353
msgid "Export G-code"
msgstr "Exporteer gcode-bestand"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Plater.cpp:5497
msgid "Send G-code"
msgstr "Stuur G-code"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
msgid "Export config"
msgstr "Exporteer configuratie"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Select all objects"
msgstr "Selecteer alle objecten"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Deselect all"
msgstr "Deselecteer alle"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
msgid "Delete selected"
msgstr "Verwijder selectie"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
msgid "Copy to clipboard"
msgstr "Kopieer naar klembord"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
msgid "Paste from clipboard"
msgstr "Plak van klembord"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
msgid "Reload plater from disk"
msgstr "Herlaad modellen van schijf"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid "Select Plater Tab"
msgstr "Selecteer 3D-weergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Select Print Settings Tab"
msgstr "Selecteer printinstellingentab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Select Filament Settings Tab"
msgstr "Selecteer filamentinstellingentab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Select Printer Settings Tab"
msgstr "Selecteer printerinstellingentab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Switch to 3D"
msgstr "Schakel over naar 3D"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Switch to Preview"
msgstr "Schakel over naar voorbeeldweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
#: src/slic3r/GUI/PrintHostDialogs.cpp:136
msgid "Print host upload queue"
msgstr "Printhost uploadwachtrij"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Camera view"
msgstr "Weergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Show/Hide object/instance labels"
msgstr "Toon/verberg objecten-/instantie-labels"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149 src/slic3r/GUI/Preferences.cpp:10
msgid "Preferences"
msgstr "Voorkeuren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Show keyboard shortcuts list"
msgstr "Toon lijst met sneltoetsen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Commands"
msgstr "Commando's"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Add Instance of the selected object"
msgstr "Voeg instantie van het geselecteerde object toe"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Remove Instance of the selected object"
msgstr "Verwijder instanties van het geselecteerde object"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""
"Druk om meerdere objecten te selecteren\n"
"of beweeg meerdere objecten met de muis"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Press to activate selection rectangle"
msgstr "Druk om selectiebox te activeren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Press to activate deselection rectangle"
msgstr "Druk om deselectiebox te activeren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
#: src/slic3r/GUI/KBShortcutsDialog.cpp:214
msgid "Arrow Up"
msgstr "Pijltje naar boven"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Move selection 10 mm in positive Y direction"
msgstr "Verplaats selectie +10 mm in Y-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
msgid "Arrow Down"
msgstr "Pijltje naar beneden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
msgid "Move selection 10 mm in negative Y direction"
msgstr "Verplaats selectie -10 mm in Y-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
#: src/slic3r/GUI/KBShortcutsDialog.cpp:216
msgid "Arrow Left"
msgstr "Pijltje naar links"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Move selection 10 mm in negative X direction"
msgstr "Verplaats selectie -10 mm in X-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
msgid "Arrow Right"
msgstr "Pijltje naar rechts"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
msgid "Move selection 10 mm in positive X direction"
msgstr "Verplaats selectie +10 mm in X-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
msgid "Any arrow"
msgstr "Elke pijl"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
msgid "Movement step set to 1 mm"
msgstr "Verplaatsingsstap instellen op 1 mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
msgid "Movement in camera space"
msgstr "Verplaatsing in cameraruimte"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "Page Up"
msgstr "Page Up"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "Rotate selection 45 degrees CCW"
msgstr "Roteer selectie 45° tegen de klok in"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
msgid "Page Down"
msgstr "Page Down"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
msgid "Rotate selection 45 degrees CW"
msgstr "Roteer selectie 45° met de klok mee"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Gizmo move"
msgstr "Verplaats"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
msgid "Gizmo scale"
msgstr "Verschaal"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
msgid "Gizmo rotate"
msgstr "Roteer"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
msgid "Gizmo cut"
msgstr "Snijden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid "Gizmo Place face on bed"
msgstr "Plaats vlak op bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
msgid "Gizmo SLA hollow"
msgstr "SLA uithollen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
msgid "Gizmo SLA support points"
msgstr "SLA-supportpunten"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
msgid "Unselect gizmo or clear selection"
msgstr "Deselecteer gizmo of selectie"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
msgid "Change camera type (perspective, orthographic)"
msgstr "Wijzig weergavetype (perspectief of orthografisch)"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:181
msgid "Zoom to Bed"
msgstr "Zoom in op bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""
"Zoom in op geselecteerde objecten\n"
"of alle objecten in de 3D-weergave als niets is geselecteerd"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
msgid "Zoom in"
msgstr "Zoom in"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
msgid "Zoom out"
msgstr "Zoom uit"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr "Toon/verberg 3Dconnexion-apparaten instellingen-dialoogvenster"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:192 src/slic3r/GUI/MainFrame.cpp:204
msgid "Plater"
msgstr "3D-weergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
#, no-c-format
msgid ""
"Press to snap by 5% in Gizmo scale\n"
"or to snap by 1mm in Gizmo move"
msgstr ""
"Druk om stapsgewijs per 5% te verschalen\n"
"of om per 1 mm te verplaatsen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid ""
"Scale selection to fit print volume\n"
"in Gizmo scale"
msgstr ""
"Zorg dat selectie past in het printvolume\n"
"door te verschalen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Press to activate one direction scaling in Gizmo scale"
msgstr "Druk in om verschaling toepassen in één richting te activeren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid ""
"Press to scale (in Gizmo scale) or rotate (in Gizmo rotate)\n"
"selected objects around their own center"
msgstr ""
"Druk om de selectie te verschalen of roteren\n"
"om hun eigen middelpunt"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Gizmos"
msgstr "Gizmo's"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
#: src/slic3r/GUI/KBShortcutsDialog.cpp:206
msgid "Upper Layer"
msgstr "Bovenste laag"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
msgid "Lower Layer"
msgstr "Onderste laag"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:208
msgid "Show/Hide Legend"
msgstr "Toon/verberg legenda"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/Plater.cpp:4083
#: src/slic3r/GUI/Tab.cpp:2392
msgid "Preview"
msgstr "Voorbeeldweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:214
msgid "Move current slider thumb Up"
msgstr "Verplaats huidige schuif naar boven"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
msgid "Move current slider thumb Down"
msgstr "Verplaats huidige schuif naar beneden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:216
msgid "Set upper thumb to current slider thumb"
msgstr "Stel de bovenste schuif in op het huidige punt"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
msgid "Set lower thumb to current slider thumb"
msgstr "Stel de onderste schuif in op het huidige punt"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
msgid "Add color change marker for current layer"
msgstr "Voeg kleurwisseling toe voor de huidige laag"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
msgid "Delete color change marker for current layer"
msgstr "Verwijder kleurwisseling voor de huidige laag"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
msgid "Layers Slider"
msgstr "Schuif voor lagen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:245
msgid "Keyboard shortcuts"
msgstr "Sneltoetsen"

#: src/slic3r/GUI/MainFrame.cpp:66
msgid ""
" - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/"
"releases"
msgstr ""
" - Vergeet niet op updates te checken op http://github.com/prusa3d/"
"PrusaSlicer/releases"

#: src/slic3r/GUI/MainFrame.cpp:174
msgid "based on Slic3r"
msgstr "gebaseerd op Slic3r"

#: src/slic3r/GUI/MainFrame.cpp:405
msgid "&New Project"
msgstr "Nieuw project"

#: src/slic3r/GUI/MainFrame.cpp:405
msgid "Start a new project"
msgstr "Start nieuw project"

#: src/slic3r/GUI/MainFrame.cpp:408
msgid "&Open Project"
msgstr "Open project"

#: src/slic3r/GUI/MainFrame.cpp:408
msgid "Open a project file"
msgstr "Open een projectbestand"

#: src/slic3r/GUI/MainFrame.cpp:413
msgid "Recent projects"
msgstr "Huidige projecten"

#: src/slic3r/GUI/MainFrame.cpp:422
msgid "The selected project is no more available"
msgstr "Het geselecteerde project is niet meer beschikbaar"

#: src/slic3r/GUI/MainFrame.cpp:422 src/slic3r/GUI/MainFrame.cpp:785
#: src/slic3r/GUI/PrintHostDialogs.cpp:231
msgid "Error"
msgstr "Fout"

#: src/slic3r/GUI/MainFrame.cpp:446
msgid "&Save Project"
msgstr "Project opslaan"

#: src/slic3r/GUI/MainFrame.cpp:446
msgid "Save current project file"
msgstr "Projectbestand opslaan"

#: src/slic3r/GUI/MainFrame.cpp:450 src/slic3r/GUI/MainFrame.cpp:452
msgid "Save Project &as"
msgstr "Project opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:450 src/slic3r/GUI/MainFrame.cpp:452
msgid "Save current project file as"
msgstr "Projectbestand opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Import STL/OBJ/AM&F/3MF"
msgstr "Importeer STL-, OBJ-, AMF- of 3MF-bestanden"

#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Load a model"
msgstr "Laad een model"

#: src/slic3r/GUI/MainFrame.cpp:464
msgid "Import &Config"
msgstr "Importeer configuratie"

#: src/slic3r/GUI/MainFrame.cpp:464
msgid "Load exported configuration file"
msgstr "Laad geëxporteerd configuratiebestand"

#: src/slic3r/GUI/MainFrame.cpp:467
msgid "Import Config from &project"
msgstr "Importeer configuratie van project"

#: src/slic3r/GUI/MainFrame.cpp:467
msgid "Load configuration from project file"
msgstr "Laad configuratie van projectbestand"

#: src/slic3r/GUI/MainFrame.cpp:471
msgid "Import Config &Bundle"
msgstr "Importeer configuratiebundel"

#: src/slic3r/GUI/MainFrame.cpp:471
msgid "Load presets from a bundle"
msgstr "Laad presets van een bundel"

#: src/slic3r/GUI/MainFrame.cpp:474
msgid "&Import"
msgstr "Importeer"

#: src/slic3r/GUI/MainFrame.cpp:477 src/slic3r/GUI/MainFrame.cpp:749
msgid "Export &G-code"
msgstr "Exporteer G-code"

#: src/slic3r/GUI/MainFrame.cpp:477
msgid "Export current plate as G-code"
msgstr "Exporteer huidige modellen als gcode-bestand"

#: src/slic3r/GUI/MainFrame.cpp:481 src/slic3r/GUI/MainFrame.cpp:750
msgid "S&end G-code"
msgstr "Stuur G-code"

#: src/slic3r/GUI/MainFrame.cpp:481
msgid "Send to print current plate as G-code"
msgstr "Stuur huidige weergave als G-code"

#: src/slic3r/GUI/MainFrame.cpp:486
msgid "Export plate as &STL"
msgstr "Exporteer huidige modellen als STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:486
msgid "Export current plate as STL"
msgstr "Exporteer huidige modellen als STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:489
msgid "Export plate as STL &including supports"
msgstr "Exporteer modellen met support als STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:489
msgid "Export current plate as STL including supports"
msgstr "Exporteer huidige modellen met support als STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Export plate as &AMF"
msgstr "Exporteer huidige modellen als AMF-bestand"

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Export current plate as AMF"
msgstr "Exporteer huidige modellen als AMF-bestand"

#: src/slic3r/GUI/MainFrame.cpp:496
msgid "Export &toolpaths as OBJ"
msgstr "Exporteer paden als OBJ-bestand"

#: src/slic3r/GUI/MainFrame.cpp:496
msgid "Export toolpaths as OBJ"
msgstr "Exporteer toolpaden als OBJ-bestand"

#: src/slic3r/GUI/MainFrame.cpp:500
msgid "Export &Config"
msgstr "Exporteer configuratie"

#: src/slic3r/GUI/MainFrame.cpp:500
msgid "Export current configuration to file"
msgstr "Exporteer huidige configuratie naar bestand"

#: src/slic3r/GUI/MainFrame.cpp:503
msgid "Export Config &Bundle"
msgstr "Exporteer configuratiebundel"

#: src/slic3r/GUI/MainFrame.cpp:503
msgid "Export all presets to file"
msgstr "Exporteer alle presets naar bestand"

#: src/slic3r/GUI/MainFrame.cpp:506
msgid "&Export"
msgstr "Exporteer"

#: src/slic3r/GUI/MainFrame.cpp:512
msgid "Quick Slice"
msgstr "Snel slicen"

#: src/slic3r/GUI/MainFrame.cpp:512
msgid "Slice a file into a G-code"
msgstr "Slice naar een gcode-bestand"

#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Quick Slice and Save As"
msgstr "Snel slicen en opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Slice a file into a G-code, save as"
msgstr "Slice naar gcode-bestand, opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:524
msgid "Repeat Last Quick Slice"
msgstr "Herhaal laatste snelle slice"

#: src/slic3r/GUI/MainFrame.cpp:524
msgid "Repeat last quick slice"
msgstr "Herhaal laatste snelle slice"

#: src/slic3r/GUI/MainFrame.cpp:532
msgid "(Re)Slice No&w"
msgstr "(Her)slice nu"

#: src/slic3r/GUI/MainFrame.cpp:532
msgid "Start new slicing process"
msgstr "Start nieuw sliceproces"

#: src/slic3r/GUI/MainFrame.cpp:536
msgid "&Repair STL file"
msgstr "Repareer STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:536
msgid "Automatically repair an STL file"
msgstr "Automatisch een STL-bestand repareren"

#: src/slic3r/GUI/MainFrame.cpp:540
msgid "&Quit"
msgstr "Afsluiten"

#: src/slic3r/GUI/MainFrame.cpp:540
#, c-format
msgid "Quit %s"
msgstr "%s afsluiten"

#: src/slic3r/GUI/MainFrame.cpp:565
msgid "&Select all"
msgstr "Selecteer alle"

#: src/slic3r/GUI/MainFrame.cpp:566
msgid "Selects all objects"
msgstr "Selecteer alle objecten"

#: src/slic3r/GUI/MainFrame.cpp:568
msgid "D&eselect all"
msgstr "Deselecteer alles"

#: src/slic3r/GUI/MainFrame.cpp:569
msgid "Deselects all objects"
msgstr "Deselecteer alle objecten"

#: src/slic3r/GUI/MainFrame.cpp:572
msgid "&Delete selected"
msgstr "Verwijder selectie"

#: src/slic3r/GUI/MainFrame.cpp:573
msgid "Deletes the current selection"
msgstr "Verwijdert huidige selectie"

#: src/slic3r/GUI/MainFrame.cpp:575
msgid "Delete &all"
msgstr "Verwijder alles"

#: src/slic3r/GUI/MainFrame.cpp:576
msgid "Deletes all objects"
msgstr "Verwijdert alle objecten"

#: src/slic3r/GUI/MainFrame.cpp:580
msgid "&Undo"
msgstr "Maak ongedaan"

#: src/slic3r/GUI/MainFrame.cpp:583
msgid "&Redo"
msgstr "Doe opnieuw"

#: src/slic3r/GUI/MainFrame.cpp:588
msgid "&Copy"
msgstr "Kopieer"

#: src/slic3r/GUI/MainFrame.cpp:589
msgid "Copy selection to clipboard"
msgstr "Kopieer selectie naar klembord"

#: src/slic3r/GUI/MainFrame.cpp:591
msgid "&Paste"
msgstr "Plak"

#: src/slic3r/GUI/MainFrame.cpp:592
msgid "Paste clipboard"
msgstr "Plak van klembord"

#: src/slic3r/GUI/MainFrame.cpp:596
msgid "Re&load from disk"
msgstr "Herlaad van schijf"

#: src/slic3r/GUI/MainFrame.cpp:597
msgid "Reload the plater from disk"
msgstr "Herlaad modellen van schijf"

#: src/slic3r/GUI/MainFrame.cpp:606
msgid "&Plater Tab"
msgstr "3D-weergavetab"

#: src/slic3r/GUI/MainFrame.cpp:606
msgid "Show the plater"
msgstr "Toon de 3D-weergave"

#: src/slic3r/GUI/MainFrame.cpp:614
msgid "P&rint Settings Tab"
msgstr "Printinstellingentab"

#: src/slic3r/GUI/MainFrame.cpp:614
msgid "Show the print settings"
msgstr "Toon de printinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:617 src/slic3r/GUI/MainFrame.cpp:752
msgid "&Filament Settings Tab"
msgstr "Filamentinstellingentab"

#: src/slic3r/GUI/MainFrame.cpp:617
msgid "Show the filament settings"
msgstr "Toon de filamentinstellingentab"

#: src/slic3r/GUI/MainFrame.cpp:621
msgid "Print&er Settings Tab"
msgstr "Printerinstellingentab"

#: src/slic3r/GUI/MainFrame.cpp:621
msgid "Show the printer settings"
msgstr "Toon de printerinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:626
msgid "3&D"
msgstr "3D"

#: src/slic3r/GUI/MainFrame.cpp:626
msgid "Show the 3D editing view"
msgstr "Toon de 3D-bewerkingsweergave"

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Pre&view"
msgstr "Voorbeeld"

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Show the 3D slices preview"
msgstr "Toon de 3D-weergave van de slice"

#: src/slic3r/GUI/MainFrame.cpp:648
msgid "Print &Host Upload Queue"
msgstr "Printhost uploadwachtrij"

#: src/slic3r/GUI/MainFrame.cpp:648
msgid "Display the Print Host Upload Queue window"
msgstr "Toon het venster van de printhost uploadwachtrij"

#: src/slic3r/GUI/MainFrame.cpp:658
msgid "Iso"
msgstr "Isometrisch"

#: src/slic3r/GUI/MainFrame.cpp:658
msgid "Iso View"
msgstr "Isometrisch aanzicht"

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:662 src/libslic3r/PrintConfig.cpp:2132
#: src/libslic3r/PrintConfig.cpp:2141
msgid "Top"
msgstr "Bovenkant"

#: src/slic3r/GUI/MainFrame.cpp:662
msgid "Top View"
msgstr "Bovenaanzicht"

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:665 src/libslic3r/PrintConfig.cpp:174
#: src/libslic3r/PrintConfig.cpp:183
msgid "Bottom"
msgstr "Onderkant"

#: src/slic3r/GUI/MainFrame.cpp:665
msgid "Bottom View"
msgstr "Onderaanzicht"

#: src/slic3r/GUI/MainFrame.cpp:667
msgid "Front"
msgstr "Voorkant"

#: src/slic3r/GUI/MainFrame.cpp:667
msgid "Front View"
msgstr "Vooraanzicht"

#: src/slic3r/GUI/MainFrame.cpp:669 src/libslic3r/PrintConfig.cpp:1632
msgid "Rear"
msgstr "Achterkant"

#: src/slic3r/GUI/MainFrame.cpp:669
msgid "Rear View"
msgstr "Achteraanzicht"

#: src/slic3r/GUI/MainFrame.cpp:671
msgid "Left"
msgstr "Links"

#: src/slic3r/GUI/MainFrame.cpp:671
msgid "Left View"
msgstr "Linkerzijaanzicht"

#: src/slic3r/GUI/MainFrame.cpp:673
msgid "Right"
msgstr "Rechts"

#: src/slic3r/GUI/MainFrame.cpp:673
msgid "Right View"
msgstr "Rechterzijaanzicht"

#: src/slic3r/GUI/MainFrame.cpp:676
msgid "Show &labels"
msgstr "Toon labels"

#: src/slic3r/GUI/MainFrame.cpp:676
msgid "Show object/instance labels in 3D scene"
msgstr "Toon object-/instantielabels in de 3D weergave"

#: src/slic3r/GUI/MainFrame.cpp:684
msgid "Prusa 3D &Drivers"
msgstr "Prusa 3D stuurprogramma"

#: src/slic3r/GUI/MainFrame.cpp:684
msgid "Open the Prusa3D drivers download page in your browser"
msgstr "Open de Prusa3D drivers-downloadpagina in uw browser"

#: src/slic3r/GUI/MainFrame.cpp:686
msgid "Software &Releases"
msgstr "Software-uitgaven"

#: src/slic3r/GUI/MainFrame.cpp:686
msgid "Open the software releases page in your browser"
msgstr "Open de software-uitgaven pagina in uw browser"

#: src/slic3r/GUI/MainFrame.cpp:692
#, c-format
msgid "%s &Website"
msgstr "%s-website"

#: src/slic3r/GUI/MainFrame.cpp:693
#, c-format
msgid "Open the %s website in your browser"
msgstr "Open de %s website in uw browser"

#: src/slic3r/GUI/MainFrame.cpp:699
msgid "System &Info"
msgstr "Systeeminfo"

#: src/slic3r/GUI/MainFrame.cpp:699
msgid "Show system information"
msgstr "Toon systeeminformatie"

#: src/slic3r/GUI/MainFrame.cpp:701
msgid "Show &Configuration Folder"
msgstr "Toon configuratiemap"

#: src/slic3r/GUI/MainFrame.cpp:701
msgid "Show user configuration folder (datadir)"
msgstr "Toon gebruikersconfiguratiemap (datadir)"

#: src/slic3r/GUI/MainFrame.cpp:703
msgid "Report an I&ssue"
msgstr "Rapporteer een fout"

#: src/slic3r/GUI/MainFrame.cpp:703
#, c-format
msgid "Report an issue on %s"
msgstr "Rapporteer een fout op %s"

#: src/slic3r/GUI/MainFrame.cpp:705
#, c-format
msgid "&About %s"
msgstr "Over %s"

#: src/slic3r/GUI/MainFrame.cpp:705
msgid "Show about dialog"
msgstr "Toon Over-dialoogvenster"

#: src/slic3r/GUI/MainFrame.cpp:708
msgid "Show the list of the keyboard shortcuts"
msgstr "Toon de lijst met sneltoetsen"

#: src/slic3r/GUI/MainFrame.cpp:721
msgid "&File"
msgstr "Bestand"

#: src/slic3r/GUI/MainFrame.cpp:722
msgid "&Edit"
msgstr "Bewerk"

#: src/slic3r/GUI/MainFrame.cpp:723
msgid "&Window"
msgstr "Venster"

#: src/slic3r/GUI/MainFrame.cpp:724
msgid "&View"
msgstr "Toon"

#: src/slic3r/GUI/MainFrame.cpp:727
msgid "&Help"
msgstr "Help"

#: src/slic3r/GUI/MainFrame.cpp:749
msgid "E&xport"
msgstr "Exporteer"

#: src/slic3r/GUI/MainFrame.cpp:750
msgid "S&end to print"
msgstr "Stuur om te printen"

#: src/slic3r/GUI/MainFrame.cpp:752
msgid "Mate&rial Settings Tab"
msgstr "Materiaalinstellingentab"

#: src/slic3r/GUI/MainFrame.cpp:773
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Kies een STL-, OBJ-, AMF-, 3MF- of PRUSA-bestand om te slicen:"

#: src/slic3r/GUI/MainFrame.cpp:784
msgid "No previously sliced file."
msgstr "Niet eerder gesliced bestand."

#: src/slic3r/GUI/MainFrame.cpp:790
msgid "Previously sliced file ("
msgstr "Eerder gesliced bestand ("

#: src/slic3r/GUI/MainFrame.cpp:790
msgid ") not found."
msgstr ") niet gevonden."

#: src/slic3r/GUI/MainFrame.cpp:791
msgid "File Not Found"
msgstr "Bestand niet gevonden"

#: src/slic3r/GUI/MainFrame.cpp:826
#, c-format
msgid "Save %s file as:"
msgstr "%s-bestand opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:826
msgid "SVG"
msgstr "SVG"

#: src/slic3r/GUI/MainFrame.cpp:826
msgid "G-code"
msgstr "G-code"

#: src/slic3r/GUI/MainFrame.cpp:838
msgid "Save zip file as:"
msgstr "ZIP-bestand opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:847 src/slic3r/GUI/Plater.cpp:3099
#: src/slic3r/GUI/Plater.cpp:5085 src/slic3r/GUI/Tab.cpp:1223
#: src/slic3r/GUI/Tab.cpp:3652
msgid "Slicing"
msgstr "Slicen"

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:849
#, c-format
msgid "Processing %s"
msgstr "%s verwerken"

#: src/slic3r/GUI/MainFrame.cpp:872
msgid " was successfully sliced."
msgstr " succesvol gesliced."

#: src/slic3r/GUI/MainFrame.cpp:874
msgid "Slicing Done!"
msgstr "Slicen klaar!"

#: src/slic3r/GUI/MainFrame.cpp:889
msgid "Select the STL file to repair:"
msgstr "Selecteer het STL-bestand om te repareren:"

#: src/slic3r/GUI/MainFrame.cpp:899
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr "OBJ-bestand opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:911
msgid "Your file was repaired."
msgstr "Het bestand is gerepareerd."

#: src/slic3r/GUI/MainFrame.cpp:911 src/libslic3r/PrintConfig.cpp:3447
msgid "Repair"
msgstr "Repareer"

#: src/slic3r/GUI/MainFrame.cpp:925
msgid "Save configuration as:"
msgstr "Configuratie opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:944 src/slic3r/GUI/MainFrame.cpp:1006
msgid "Select configuration to load:"
msgstr "Selecteer configuratie om te laden:"

#: src/slic3r/GUI/MainFrame.cpp:980
msgid "Save presets bundle as:"
msgstr "Presetbundel opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1027
#, c-format
msgid "%d presets successfully imported."
msgstr "%d presets succesvol geïmporteerd."

#: src/slic3r/GUI/Mouse3DController.cpp:274
msgid "3Dconnexion settings"
msgstr "3Dconnexion-instellingen"

#: src/slic3r/GUI/Mouse3DController.cpp:289
msgid "Device:"
msgstr "Apparaat:"

#: src/slic3r/GUI/Mouse3DController.cpp:296
msgid "Speed:"
msgstr "Snelheid:"

#: src/slic3r/GUI/Mouse3DController.cpp:300
#: src/slic3r/GUI/Mouse3DController.cpp:317
msgid "Translation"
msgstr "Verplaatsing"

#: src/slic3r/GUI/Mouse3DController.cpp:308
#: src/slic3r/GUI/Mouse3DController.cpp:317
msgid "Zoom"
msgstr "Zoom"

#: src/slic3r/GUI/Mouse3DController.cpp:313
msgid "Deadzone:"
msgstr "Deadzone:"

#: src/slic3r/GUI/MsgDialog.cpp:73
#, c-format
msgid "%s error"
msgstr "%s fout"

#: src/slic3r/GUI/MsgDialog.cpp:74
#, c-format
msgid "%s has encountered an error"
msgstr "%s heeft een fout veroorzaakt"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:56
msgid "Instances"
msgstr "Instanties"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:60
#: src/slic3r/GUI/ObjectDataViewModel.cpp:216
#, c-format
msgid "Instance %d"
msgstr "Instantie %d"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:67 src/slic3r/GUI/Tab.cpp:3502
#: src/slic3r/GUI/Tab.cpp:3590
msgid "Layers"
msgstr "Lagen"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:94
msgid "Range"
msgstr "Bereik"

#: src/slic3r/GUI/OptionsGroup.cpp:258
msgctxt "Layers"
msgid "Top"
msgstr "Bovenkant"

#: src/slic3r/GUI/OptionsGroup.cpp:258
msgctxt "Layers"
msgid "Bottom"
msgstr "Onderkant"

#: src/slic3r/GUI/Plater.cpp:161
msgid "Volume"
msgstr "Volume"

#: src/slic3r/GUI/Plater.cpp:162
msgid "Facets"
msgstr "Vlakken"

#: src/slic3r/GUI/Plater.cpp:163
msgid "Materials"
msgstr "Materialen"

#: src/slic3r/GUI/Plater.cpp:166
msgid "Manifold"
msgstr "Gesloten model"

#: src/slic3r/GUI/Plater.cpp:216
msgid "Sliced Info"
msgstr "Slice info"

#: src/slic3r/GUI/Plater.cpp:235 src/slic3r/GUI/Plater.cpp:1224
msgid "Used Filament (m)"
msgstr "Filamentverbruik (m)"

#: src/slic3r/GUI/Plater.cpp:236
msgid "Used Filament (mm³)"
msgstr "Filamentverbruik (mm³)"

#: src/slic3r/GUI/Plater.cpp:237
msgid "Used Filament (g)"
msgstr "Filamentverbruik (g)"

#: src/slic3r/GUI/Plater.cpp:238
msgid "Used Material (unit)"
msgstr "Materiaalverbruik (eenheid)"

#: src/slic3r/GUI/Plater.cpp:239
msgid "Cost (money)"
msgstr "Kosten (€)"

#: src/slic3r/GUI/Plater.cpp:240 src/slic3r/GUI/Plater.cpp:1211
#: src/slic3r/GUI/Plater.cpp:1253
msgid "Estimated printing time"
msgstr "Geschatte printtijd"

#: src/slic3r/GUI/Plater.cpp:241
msgid "Number of tool changes"
msgstr "Aantal toolwisselingen"

#: src/slic3r/GUI/Plater.cpp:338
msgid "Click to edit preset"
msgstr "Klik om de preset te wijzigen"

#: src/slic3r/GUI/Plater.cpp:493
msgid "Select what kind of support do you need"
msgstr "Selecteer welk type support nodig is"

#: src/slic3r/GUI/Plater.cpp:495 src/libslic3r/PrintConfig.cpp:1901
#: src/libslic3r/PrintConfig.cpp:2674
msgid "Support on build plate only"
msgstr "Support alleen op het bed"

#: src/slic3r/GUI/Plater.cpp:496 src/slic3r/GUI/Plater.cpp:619
msgid "For support enforcers only"
msgstr "Alleen voor supportforceringen"

#: src/slic3r/GUI/Plater.cpp:497
msgid "Everywhere"
msgstr "Overal"

#: src/slic3r/GUI/Plater.cpp:529 src/slic3r/GUI/Tab.cpp:1119
msgid "Brim"
msgstr "Brim"

#: src/slic3r/GUI/Plater.cpp:531
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr "Door dit aan te vinken zal een brim rond elke object geprint worden."

#: src/slic3r/GUI/Plater.cpp:539
msgid "Purging volumes"
msgstr "Afveegvolume"

#: src/slic3r/GUI/Plater.cpp:633
msgid "Select what kind of pad do you need"
msgstr "Selecteer welk soort basisplaat nodig is"

#: src/slic3r/GUI/Plater.cpp:635
msgid "Below object"
msgstr "Onder het object"

#: src/slic3r/GUI/Plater.cpp:636
msgid "Around object"
msgstr "Rondom het object"

#: src/slic3r/GUI/Plater.cpp:810
msgid "Print settings"
msgstr "Printinstellingen"

#: src/slic3r/GUI/Plater.cpp:811 src/slic3r/GUI/Tab.cpp:1427
#: src/slic3r/GUI/Tab.cpp:1428
msgid "Filament"
msgstr "Filament"

#: src/slic3r/GUI/Plater.cpp:812
msgid "SLA print settings"
msgstr "SLA-printinstellingen"

#: src/slic3r/GUI/Plater.cpp:813 src/slic3r/GUI/Preset.cpp:1522
msgid "SLA material"
msgstr "SLA-materiaal"

#: src/slic3r/GUI/Plater.cpp:814
msgid "Printer"
msgstr "Printer"

#: src/slic3r/GUI/Plater.cpp:873 src/slic3r/GUI/Plater.cpp:5497
msgid "Send to printer"
msgstr "Stuur naar printer"

#: src/slic3r/GUI/Plater.cpp:874
msgid "Remove device"
msgstr "Verwijder schijf"

#: src/slic3r/GUI/Plater.cpp:875
msgid "Export to SD card / Flash drive"
msgstr "Exporteer naar SD-kaart / USB-stick"

#: src/slic3r/GUI/Plater.cpp:887 src/slic3r/GUI/Plater.cpp:3099
#: src/slic3r/GUI/Plater.cpp:5088
msgid "Slice now"
msgstr "Slice nu"

#: src/slic3r/GUI/Plater.cpp:1037
msgid "Hold Shift to Slice & Export G-code"
msgstr "Houdt shift ingedrukt om te slicen en de G-code te exporteren"

#: src/slic3r/GUI/Plater.cpp:1147
#, c-format
msgid "%d (%d shells)"
msgstr "%d (%d shells)"

#: src/slic3r/GUI/Plater.cpp:1152
#, c-format
msgid "Auto-repaired (%d errors)"
msgstr "Automatisch gerepareerd (%d fouten)"

#: src/slic3r/GUI/Plater.cpp:1155
#, c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr ""
"%d degenereer vlakken, %d randen vastgezet, %d vlakken verwijderd, %d "
"vlakken toegevoegd, %d vlakken omgekeerd, %d randen omgekeerd"

#: src/slic3r/GUI/Plater.cpp:1165
msgid "Yes"
msgstr "JA"

#: src/slic3r/GUI/Plater.cpp:1186
msgid "Used Material (ml)"
msgstr "Materiaalgebruik (ml)"

#: src/slic3r/GUI/Plater.cpp:1189
msgid "object(s)"
msgstr "object(en)"

#: src/slic3r/GUI/Plater.cpp:1189
msgid "supports and pad"
msgstr "support en basisplaat"

#: src/slic3r/GUI/Plater.cpp:1226 src/slic3r/GUI/Plater.cpp:1240
msgid "objects"
msgstr "objecten"

#: src/slic3r/GUI/Plater.cpp:1226 src/slic3r/GUI/Plater.cpp:1240
msgid "wipe tower"
msgstr "afveegblok"

#: src/slic3r/GUI/Plater.cpp:1238 src/libslic3r/PrintConfig.cpp:760
#: src/libslic3r/PrintConfig.cpp:2510 src/libslic3r/PrintConfig.cpp:2511
msgid "Cost"
msgstr "Kosten"

#: src/slic3r/GUI/Plater.cpp:1256
msgid "normal mode"
msgstr "normale modus"

#: src/slic3r/GUI/Plater.cpp:1260 src/slic3r/GUI/Plater.cpp:1269
#: src/libslic3r/PrintConfig.cpp:582
msgid "Color"
msgstr "Kleur"

#: src/slic3r/GUI/Plater.cpp:1265
msgid "stealth mode"
msgstr "stille modus"

#: src/slic3r/GUI/Plater.cpp:1373
msgid "Load File"
msgstr "Laad bestand"

#: src/slic3r/GUI/Plater.cpp:1377
msgid "Load Files"
msgstr "Laad bestanden"

#: src/slic3r/GUI/Plater.cpp:2129
msgid "New Project"
msgstr "Nieuw project"

#: src/slic3r/GUI/Plater.cpp:2251
msgid "Loading"
msgstr "Aan het laden"

#: src/slic3r/GUI/Plater.cpp:2261
#, c-format
msgid "Processing input file %s"
msgstr "Verwerken van inputbestand %s"

#: src/slic3r/GUI/Plater.cpp:2289
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr "U kunt geen SLA-project laden met een meerdelig object op het bed"

#: src/slic3r/GUI/Plater.cpp:2290 src/slic3r/GUI/Tab.cpp:2949
msgid "Please check your object list before preset changing."
msgstr "Controleer de objectenlijst voor het wijzigen van de preset."

#: src/slic3r/GUI/Plater.cpp:2335
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?"
msgstr ""
"Dit bestand bevat meerdere objecten die op meerdere hoogten zijn "
"gepositioneerd.\n"
"Moet dit bestand beschouwd worden als een enkel object met meerdere "
"onderdelen\n"
"in plaats van als meerdere objecten?"

#: src/slic3r/GUI/Plater.cpp:2338 src/slic3r/GUI/Plater.cpp:2391
msgid "Multi-part object detected"
msgstr "Meerdelig object gedetecteerd"

#: src/slic3r/GUI/Plater.cpp:2345
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""
"Dit bestand kan niet geladen worden in eenvoudige modus. Wilt u overstappen "
"op geavanceerde modus?"

#: src/slic3r/GUI/Plater.cpp:2346
msgid "Detected advanced data"
msgstr "Geavanceerde data gedetecteerd"

#: src/slic3r/GUI/Plater.cpp:2368
#, c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""
"U kan geen objecten toevoegen van %s, omdat sommige daarvan meerdelig kunnen "
"zijn"

#: src/slic3r/GUI/Plater.cpp:2388
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""
"Meerdere objecten zijn geladen voor een multi-materialprinter.\n"
"Moeten deze objecten beschouwd worden als één object\n"
"met meerdere onderdelen, of als meerdere objecten?"

#: src/slic3r/GUI/Plater.cpp:2404
msgid "Loaded"
msgstr "Geladen"

#: src/slic3r/GUI/Plater.cpp:2506
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""
"Het object is te groot. Daarom is het automatisch verschaald tot de grootte "
"van het printbed."

#: src/slic3r/GUI/Plater.cpp:2507
msgid "Object too large?"
msgstr "Object te groot?"

#: src/slic3r/GUI/Plater.cpp:2569
msgid "Export STL file:"
msgstr "Exporteer STL-bestand:"

#: src/slic3r/GUI/Plater.cpp:2576
msgid "Export AMF file:"
msgstr "Exporteer AMF-bestand:"

#: src/slic3r/GUI/Plater.cpp:2582
msgid "Save file as:"
msgstr "Bestand opslaan als:"

#: src/slic3r/GUI/Plater.cpp:2588
msgid "Export OBJ file:"
msgstr "Exporteer OBJ-bestand:"

#: src/slic3r/GUI/Plater.cpp:2690
msgid "Delete Object"
msgstr "Verwijder object"

#: src/slic3r/GUI/Plater.cpp:2701
msgid "Reset Project"
msgstr "Reset project"

#: src/slic3r/GUI/Plater.cpp:2738
msgid "Hollow"
msgstr "Uithollen"

#: src/slic3r/GUI/Plater.cpp:2745
msgid "Optimize Rotation"
msgstr "Optimaliseer rotatie"

#: src/slic3r/GUI/Plater.cpp:2791
msgid "Arranging"
msgstr "Schikken"

#: src/slic3r/GUI/Plater.cpp:2813
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr "Kan modellen niet schikken. Sommige vormen kunnen ongeldig zijn."

#: src/slic3r/GUI/Plater.cpp:2819
msgid "Arranging canceled."
msgstr "Schikken geannuleerd."

#: src/slic3r/GUI/Plater.cpp:2820
msgid "Arranging done."
msgstr "Schikken voltooid."

#: src/slic3r/GUI/Plater.cpp:2836
msgid "Searching for optimal orientation"
msgstr "Zoeken naar optimale oriëntatie"

#: src/slic3r/GUI/Plater.cpp:2869
msgid "Orientation search canceled."
msgstr "Oriëntatie zoeken geannuleerd."

#: src/slic3r/GUI/Plater.cpp:2870
msgid "Orientation found."
msgstr "Oriëntatie gevonden."

#: src/slic3r/GUI/Plater.cpp:2900
msgid "Indexing hollowed object"
msgstr "Uitgehold object indexeren"

#: src/slic3r/GUI/Plater.cpp:2904
msgid "Hollowing cancelled."
msgstr "Uithollen geannuleerd."

#: src/slic3r/GUI/Plater.cpp:2905
msgid "Hollowing done."
msgstr "Uithollen voltooid."

#: src/slic3r/GUI/Plater.cpp:2907
msgid "Hollowing failed."
msgstr "Uithollen mislukt."

#: src/slic3r/GUI/Plater.cpp:2948
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""
"Het geselecteerde object kan niet opgedeeld worden omdat het meer dan één "
"volume bevat."

#: src/slic3r/GUI/Plater.cpp:2959
msgid "Split to Objects"
msgstr "Splits op naar objecten"

#: src/slic3r/GUI/Plater.cpp:3084
msgid "Invalid data"
msgstr "Ongeldige data"

#: src/slic3r/GUI/Plater.cpp:3093
msgid "Ready to slice"
msgstr "Klaar om te slicen"

#: src/slic3r/GUI/Plater.cpp:3131 src/slic3r/GUI/PrintHostDialogs.cpp:232
msgid "Cancelling"
msgstr "Annuleren"

#: src/slic3r/GUI/Plater.cpp:3148
msgid "Another export job is currently running."
msgstr "Een andere export loopt op dit moment."

#: src/slic3r/GUI/Plater.cpp:3264
msgid "Please select the file to reload"
msgstr "Selecteer het bestand om te herladen"

#: src/slic3r/GUI/Plater.cpp:3299
msgid "It is not allowed to change the file to reload"
msgstr "Het is niet toegestaan om het te laden bestand te wijzigen"

#: src/slic3r/GUI/Plater.cpp:3299
msgid "Do you want to retry"
msgstr "Wilt u dit opnieuw proberen"

#: src/slic3r/GUI/Plater.cpp:3317
msgid "Reload from: "
msgstr "Herlaad van: "

#: src/slic3r/GUI/Plater.cpp:3406
msgid "Unable to reload:"
msgstr "Niet in staat om te herladen:"

#: src/slic3r/GUI/Plater.cpp:3411
msgid "Error during reload"
msgstr "Fout tijdens herladen"

#: src/slic3r/GUI/Plater.cpp:3430
msgid "Reload all from disk"
msgstr "Herlaad alles van schijf"

#: src/slic3r/GUI/Plater.cpp:3451
msgid "Fix Throught NetFabb"
msgstr "Repareer met NetFabb"

#: src/slic3r/GUI/Plater.cpp:3642
msgid "Export failed"
msgstr "Exporteren mislukt"

#: src/slic3r/GUI/Plater.cpp:3647 src/slic3r/GUI/PrintHostDialogs.cpp:233
msgid "Cancelled"
msgstr "Geannuleerd"

#: src/slic3r/GUI/Plater.cpp:3909 src/slic3r/GUI/Plater.cpp:3931
msgid "Remove the selected object"
msgstr "Verwijder het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:3918
msgid "Add one more instance of the selected object"
msgstr "Voeg een instantie van het geselecteerde object toe"

#: src/slic3r/GUI/Plater.cpp:3920
msgid "Remove one instance of the selected object"
msgstr "Verwijder een instantie van het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:3922
msgid "Set number of instances"
msgstr "Stel aantal instanties in"

#: src/slic3r/GUI/Plater.cpp:3922
msgid "Change the number of instances of the selected object"
msgstr "Wijzig het aantal instanties van het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:3941
msgid "Reload the selected object from disk"
msgstr "Herlaad het geselecteerde object van de schijf"

#: src/slic3r/GUI/Plater.cpp:3944
msgid "Export the selected object as STL file"
msgstr "Exporteer de geselecteerde objecten als STL-bestand"

#: src/slic3r/GUI/Plater.cpp:3973
msgid "Along X axis"
msgstr "Over de X-as"

#: src/slic3r/GUI/Plater.cpp:3973
msgid "Mirror the selected object along the X axis"
msgstr "Spiegel het geselecteerde object over de X-as"

#: src/slic3r/GUI/Plater.cpp:3975
msgid "Along Y axis"
msgstr "Over de Y-as"

#: src/slic3r/GUI/Plater.cpp:3975
msgid "Mirror the selected object along the Y axis"
msgstr "Spiegel het geselecteerde object over de Y-as"

#: src/slic3r/GUI/Plater.cpp:3977
msgid "Along Z axis"
msgstr "Over de Z-as"

#: src/slic3r/GUI/Plater.cpp:3977
msgid "Mirror the selected object along the Z axis"
msgstr "Spiegel het geselecteerde object over de Z-as"

#: src/slic3r/GUI/Plater.cpp:3980
msgid "Mirror"
msgstr "Spiegelen"

#: src/slic3r/GUI/Plater.cpp:3980
msgid "Mirror the selected object"
msgstr "Spiegel het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:3992
msgid "To objects"
msgstr "Aan objecten"

#: src/slic3r/GUI/Plater.cpp:3992 src/slic3r/GUI/Plater.cpp:4012
msgid "Split the selected object into individual objects"
msgstr "Verdeel het geselecteerde object in individuele objecten"

#: src/slic3r/GUI/Plater.cpp:3994
msgid "To parts"
msgstr "Aan onderdelen"

#: src/slic3r/GUI/Plater.cpp:3994 src/slic3r/GUI/Plater.cpp:4026
msgid "Split the selected object into individual sub-parts"
msgstr "Deel het geselecteerde object op in meerdere subonderdelen"

#: src/slic3r/GUI/Plater.cpp:3997 src/slic3r/GUI/Plater.cpp:4012
#: src/slic3r/GUI/Plater.cpp:4026 src/libslic3r/PrintConfig.cpp:3471
msgid "Split"
msgstr "Verdeel"

#: src/slic3r/GUI/Plater.cpp:3997
msgid "Split the selected object"
msgstr "Verdeel het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:4018
msgid "Optimize orientation"
msgstr "Optimaliseer oriëntatie"

#: src/slic3r/GUI/Plater.cpp:4018
msgid "Optimize the rotation of the object for better print results."
msgstr "Optimaliseer de rotatie van het object voor betere printresultaten."

#: src/slic3r/GUI/Plater.cpp:4075
msgid "3D editor view"
msgstr "3D bewerkingsweergave"

#: src/slic3r/GUI/Plater.cpp:4378
msgid ""
"%1% printer was active at the time the target Undo / Redo snapshot was "
"taken. Switching to %1% printer requires reloading of %1% presets."
msgstr ""
"%1% de printer was actief op het moment een 'ongedaan maken'- of 'opnieuw "
"doen'-snapshot werd genomen. Schakelen naar %1% printer vereist herladen van "
"%1% presets."

#: src/slic3r/GUI/Plater.cpp:4553
msgid "Load Project"
msgstr "Laad project"

#: src/slic3r/GUI/Plater.cpp:4581
msgid "Import Object"
msgstr "Importeer object"

#: src/slic3r/GUI/Plater.cpp:4585
msgid "Import Objects"
msgstr "Importeer objecten"

#: src/slic3r/GUI/Plater.cpp:4647
msgid "All objects will be removed, continue?"
msgstr "Alle objecten worden verwijderd. Doorgaan?"

#: src/slic3r/GUI/Plater.cpp:4655
msgid "Delete Selected Objects"
msgstr "Verwijder geselecteerde objecten"

#: src/slic3r/GUI/Plater.cpp:4663
msgid "Increase Instances"
msgstr "Verhoog aantal instanties"

#: src/slic3r/GUI/Plater.cpp:4698
msgid "Decrease Instances"
msgstr "Verlaag aantal instanties"

#: src/slic3r/GUI/Plater.cpp:4734
#, c-format
msgid "Set numbers of copies to %d"
msgstr "Stel aantal kopieën in voor %d"

#: src/slic3r/GUI/Plater.cpp:4764
msgid "Cut by Plane"
msgstr "Snij met behulp van vlak"

#: src/slic3r/GUI/Plater.cpp:4817
msgid "Save G-code file as:"
msgstr "gcode-bestand opslaan als:"

#: src/slic3r/GUI/Plater.cpp:4817
msgid "Save SL1 file as:"
msgstr "SL1-bestand opslaan als:"

#: src/slic3r/GUI/Plater.cpp:4963
#, c-format
msgid "STL file exported to %s"
msgstr "STL-bestand geëxporteerd naar %s"

#: src/slic3r/GUI/Plater.cpp:4980
#, c-format
msgid "AMF file exported to %s"
msgstr "AMF-bestand geëxporteerd naar %s"

#: src/slic3r/GUI/Plater.cpp:4983
#, c-format
msgid "Error exporting AMF file %s"
msgstr "Fout bij het exporteren van AMF-bestand %s"

#: src/slic3r/GUI/Plater.cpp:5016
#, c-format
msgid "3MF file exported to %s"
msgstr "3MF-bestand geëxporteerd naar %s"

#: src/slic3r/GUI/Plater.cpp:5021
#, c-format
msgid "Error exporting 3MF file %s"
msgstr "Fout bij het exporteren van 3MF-bestand %s"

#: src/slic3r/GUI/Plater.cpp:5496
msgid "Export"
msgstr "Exporteer"

#: src/slic3r/GUI/Plater.cpp:5581
msgid "Paste From Clipboard"
msgstr "Plak van klembord"

#: src/slic3r/GUI/Preferences.cpp:22 src/slic3r/GUI/Tab.cpp:1798
#: src/slic3r/GUI/Tab.cpp:2042
msgid "General"
msgstr "Algemeen"

#: src/slic3r/GUI/Preferences.cpp:39
msgid "Remember output directory"
msgstr "Onthoud de outputmap"

#: src/slic3r/GUI/Preferences.cpp:41
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer de laatst gebruikte exportmap "
"gebruiken in plaats van de importmap."

#: src/slic3r/GUI/Preferences.cpp:47
msgid "Auto-center parts"
msgstr "Centreer onderdelen automatisch"

#: src/slic3r/GUI/Preferences.cpp:49
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer objecten rondom het midden centreren."

#: src/slic3r/GUI/Preferences.cpp:55
msgid "Background processing"
msgstr "Achtergrondverwerking"

#: src/slic3r/GUI/Preferences.cpp:57
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer objecten voorbewerken zodra deze "
"zijn geladen om tijd te besparen bij het exporteren van de G-code."

#: src/slic3r/GUI/Preferences.cpp:66
msgid ""
"If enabled, PrusaSlicer will check for the new versions of itself online. "
"When a new version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer zelf controleren op nieuwe versies. "
"Als een nieuwe versie beschikbaar is, wordt een melding weergegeven bij de "
"volgende keer opstarten. Dit is slechts een melding; er wordt niets "
"automatisch geïnstalleerd."

#: src/slic3r/GUI/Preferences.cpp:72
msgid "Export sources full pathnames to 3mf and amf"
msgstr "Exporteer de volledige padnamen naar 3MF- en AMF-bestanden"

#: src/slic3r/GUI/Preferences.cpp:74
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""
"Als dit is ingeschakeld is het 'herladen van de schijf'-commando toegestaan "
"om automatisch bestanden te vinden en laden als deze worden aangeroepen."

#: src/slic3r/GUI/Preferences.cpp:82
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer updates of ingebouwde presets op de "
"achtergrond downloaden. Deze updates worden gedownload naar een tijdelijke "
"locatie. Als een nieuwe preset beschikbaar komt, zal dit gemeld worden bij "
"de eerstvolgende keer opstarten."

#: src/slic3r/GUI/Preferences.cpp:87
msgid "Suppress \" - default - \" presets"
msgstr "Verberg 'standaard'-presets"

#: src/slic3r/GUI/Preferences.cpp:89
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"Verberg 'standaard'-presets in de print-, filament- en printerselecties als "
"er andere geldige presets beschikbaar zijn."

#: src/slic3r/GUI/Preferences.cpp:95
msgid "Show incompatible print and filament presets"
msgstr "Toon incompatibele print- en filamentpresets"

#: src/slic3r/GUI/Preferences.cpp:97
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"Als dit aan staat worden de print- en filamentpresets getoond in de presets-"
"editor, zelfs als ze als incompatibel met de actieve printer zijn gemarkeerd"

#: src/slic3r/GUI/Preferences.cpp:104
msgid "Use Retina resolution for the 3D scene"
msgstr "Gebruik hoge resolutie voor de 3D-scène"

#: src/slic3r/GUI/Preferences.cpp:106
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""
"Als dit is ingeschakeld zal de 3D-scène worden gerenderd in hoge resolutie. "
"Als u problemen ondervindt met de prestaties kan het uitschakelen van deze "
"optie mogelijk helpen."

#: src/slic3r/GUI/Preferences.cpp:113
msgid "Camera"
msgstr "Camera"

#: src/slic3r/GUI/Preferences.cpp:119
msgid "Use perspective camera"
msgstr "Gebruik perspectiefweergave"

#: src/slic3r/GUI/Preferences.cpp:121
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""
"Als dit is ingeschakeld zal de weergave op perspectief worden gezet. Anders "
"wordt een orthografische weergave gebruikt."

#: src/slic3r/GUI/Preferences.cpp:126
msgid "Use free camera"
msgstr "Gebruik vrij beweegbare camera"

#: src/slic3r/GUI/Preferences.cpp:128
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""
"Als dit is ingeschakeld wordt de vrij beweegbare camera gebruikt, anders een "
"vaste camera."

#: src/slic3r/GUI/Preferences.cpp:133
msgid "GUI"
msgstr "GUI"

#: src/slic3r/GUI/Preferences.cpp:143
msgid "Use custom size for toolbar icons"
msgstr "Gebruik een aangepaste grootte voor werkbalkpictogrammen"

#: src/slic3r/GUI/Preferences.cpp:145
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""
"Grootte van werkbalkpictogrammen handmatig instellen als dit is ingeschakeld."

#: src/slic3r/GUI/Preferences.cpp:172
#, c-format
msgid "You need to restart %s to make the changes effective."
msgstr "U moet %s opnieuw opstarten om wijzigingen door te voeren."

#: src/slic3r/GUI/Preferences.cpp:222
msgid "Icon size in a respect to the default size"
msgstr "Pictogramgrootte vergeleken met de originele grootte"

#: src/slic3r/GUI/Preferences.cpp:237
msgid "Select toolbar icon size in respect to the default one."
msgstr "Selecteer werkbalk-pictogramgrootte in verhouding tot de originele."

#: src/slic3r/GUI/Preset.cpp:247
msgid "modified"
msgstr "aangepast"

#: src/slic3r/GUI/Preset.cpp:1107 src/slic3r/GUI/Preset.cpp:1162
#: src/slic3r/GUI/Preset.cpp:1240 src/slic3r/GUI/Preset.cpp:1282
#: src/slic3r/GUI/PresetBundle.cpp:1576 src/slic3r/GUI/PresetBundle.cpp:1665
msgid "System presets"
msgstr "Systeempresets"

#: src/slic3r/GUI/Preset.cpp:1166 src/slic3r/GUI/Preset.cpp:1286
#: src/slic3r/GUI/PresetBundle.cpp:1670
msgid "User presets"
msgstr "Presets van de gebruiker"

#: src/slic3r/GUI/Preset.cpp:1199
msgid "Add/Remove materials"
msgstr "Verwijder of voeg materialen toe"

#: src/slic3r/GUI/Preset.cpp:1201
msgid "Add/Remove printers"
msgstr "Voeg toe/verwijder printers"

#: src/slic3r/GUI/Preset.cpp:1520
msgid "filament"
msgstr "filament"

#: src/slic3r/GUI/Preset.cpp:1521
msgid "SLA print"
msgstr "SLA-print"

#: src/slic3r/GUI/PresetBundle.cpp:1697
msgid "Add/Remove filaments"
msgstr "Verwijder of voeg filamenten toe"

#: src/slic3r/GUI/PresetHints.cpp:29
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""
"Als de geschatte laagtijd onder de ~%1%s komt, zal de ventilator draaien op "
"%2%%% en de printsnelheid wordt zover gereduceerd dat niet meer dan %3%s "
"worden gebruikt op die laag (echter nooit langzamer dan %4%mm/s)."

#: src/slic3r/GUI/PresetHints.cpp:36
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""
"Als de geschatte laagtijd groter is, maar nog steeds onder de ~%1%s, zal de "
"ventilator draaien op een proportioneel verlagende snelheid tussen %2%%% en "
"%3%%%."

#: src/slic3r/GUI/PresetHints.cpp:40
msgid "During the other layers, fan"
msgstr "Tijdens de overige lagen, ventilator"

#: src/slic3r/GUI/PresetHints.cpp:42
msgid "Fan"
msgstr "Ventilator"

#: src/slic3r/GUI/PresetHints.cpp:48
msgid "will always run at %1%%%"
msgstr "zal altijd draaien op %1%%%"

#: src/slic3r/GUI/PresetHints.cpp:51
msgid "except for the first %1% layers."
msgstr "behalve voor de eerste %1% lagen."

#: src/slic3r/GUI/PresetHints.cpp:53
msgid "except for the first layer."
msgstr "behalve voor de eerste laag."

#: src/slic3r/GUI/PresetHints.cpp:55
msgid "will be turned off."
msgstr "wordt uitgeschakeld."

#: src/slic3r/GUI/PresetHints.cpp:156
msgid "external perimeters"
msgstr "buitenperimeters"

#: src/slic3r/GUI/PresetHints.cpp:165
msgid "perimeters"
msgstr "perimeters"

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr "vulling"

#: src/slic3r/GUI/PresetHints.cpp:184
msgid "solid infill"
msgstr "dichte vulling"

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "top solid infill"
msgstr "bovenste dichte vulling"

#: src/slic3r/GUI/PresetHints.cpp:203
msgid "support"
msgstr "support"

#: src/slic3r/GUI/PresetHints.cpp:213
msgid "support interface"
msgstr "supportinterface"

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "First layer volumetric"
msgstr "Eerste laag volumetrisch"

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "Bridging volumetric"
msgstr "Volumetrische bruggen"

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "Volumetric"
msgstr "Volumetrisch"

#: src/slic3r/GUI/PresetHints.cpp:220
msgid "flow rate is maximized"
msgstr "debiet is gemaximaliseerd"

#: src/slic3r/GUI/PresetHints.cpp:223
msgid "by the print profile maximum"
msgstr "door het printprofiel maximaal"

#: src/slic3r/GUI/PresetHints.cpp:224
msgid "when printing"
msgstr "tijdens het printen"

#: src/slic3r/GUI/PresetHints.cpp:225
msgid "with a volumetric rate"
msgstr "met een volumetrische ratio"

#: src/slic3r/GUI/PresetHints.cpp:229
#, c-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr "%3.2f mm³/s met een filamentsnelheid van %3.2f mm/s."

#: src/slic3r/GUI/PresetHints.cpp:247
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""
"Aanbevolen minimale wanddikte. Niet beschikbaar in verband met ongeldige "
"laagdikte."

#: src/slic3r/GUI/PresetHints.cpp:263
#, c-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr "Aanbevolen objecten met dunne wanden voor laagdikte %.2fmm en"

#: src/slic3r/GUI/PresetHints.cpp:270
#, c-format
msgid "%d lines: %.2f mm"
msgstr "%d lijnen: %.2fmm"

#: src/slic3r/GUI/PresetHints.cpp:274
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""
"Aanbevolen dunne wanden: not beschikbaar door extreem smalle extrusiebreedte."

#: src/slic3r/GUI/PresetHints.cpp:304
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""
"Top/bodem-shelldikte hint: niet beschikbaar door een ongeldige laagdikte."

#: src/slic3r/GUI/PresetHints.cpp:317
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr "Topshell is %1% mm dik bij een laagdikte van %2% mm."

#: src/slic3r/GUI/PresetHints.cpp:320
msgid "Minimum top shell thickness is %1% mm."
msgstr "Minimale topshelldikte is %1% mm."

#: src/slic3r/GUI/PresetHints.cpp:323
msgid "Top is open."
msgstr "Bovenzijde is open."

#: src/slic3r/GUI/PresetHints.cpp:336
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr "Bodemshell is %1% mm dik bij een laagdikte van %2% mm."

#: src/slic3r/GUI/PresetHints.cpp:339
msgid "Minimum bottom shell thickness is %1% mm."
msgstr "Minimale bodemshelldikte is %1% mm."

#: src/slic3r/GUI/PresetHints.cpp:342
msgid "Bottom is open."
msgstr "Onderzijde is open."

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Send G-Code to printer host"
msgstr "Stuur G-code naar printerhost"

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Upload to Printer Host with the following filename:"
msgstr "Upload naar printerhost met de volgende bestandsnaam:"

#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Start printing after upload"
msgstr "Print starten na het uploaden"

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""
"Gebruik schuine streepjes ( / ) als mapscheidingstekens als dat nodig is."

#: src/slic3r/GUI/PrintHostDialogs.cpp:149
msgid "ID"
msgstr "ID"

#: src/slic3r/GUI/PrintHostDialogs.cpp:150
msgid "Progress"
msgstr "Voortgang"

#: src/slic3r/GUI/PrintHostDialogs.cpp:151
msgid "Status"
msgstr "Status"

#: src/slic3r/GUI/PrintHostDialogs.cpp:152
msgid "Host"
msgstr "Host"

#: src/slic3r/GUI/PrintHostDialogs.cpp:153
msgid "Filename"
msgstr "Bestandsnaam"

#: src/slic3r/GUI/PrintHostDialogs.cpp:154
msgid "Error Message"
msgstr "Foutbericht"

#: src/slic3r/GUI/PrintHostDialogs.cpp:157
msgid "Cancel selected"
msgstr "Annuleren geselecteerd"

#: src/slic3r/GUI/PrintHostDialogs.cpp:159
msgid "Show error message"
msgstr "Toon foutbericht"

#: src/slic3r/GUI/PrintHostDialogs.cpp:198
#: src/slic3r/GUI/PrintHostDialogs.cpp:229
msgid "Enqueued"
msgstr "In de wachtrij geplaatst"

#: src/slic3r/GUI/PrintHostDialogs.cpp:230
msgid "Uploading"
msgstr "Uploaden"

#: src/slic3r/GUI/PrintHostDialogs.cpp:234
msgid "Completed"
msgstr "Voltooid"

#: src/slic3r/GUI/PrintHostDialogs.cpp:272
msgid "Error uploading to print host:"
msgstr "Fout bij het uploaden naar de printhost:"

#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr "Fout: geen ramming"

#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr "Tijd"

#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
#: src/libslic3r/PrintConfig.cpp:644 src/libslic3r/PrintConfig.cpp:688
#: src/libslic3r/PrintConfig.cpp:703 src/libslic3r/PrintConfig.cpp:2408
#: src/libslic3r/PrintConfig.cpp:2417 src/libslic3r/PrintConfig.cpp:2527
#: src/libslic3r/PrintConfig.cpp:2535 src/libslic3r/PrintConfig.cpp:2543
#: src/libslic3r/PrintConfig.cpp:2550 src/libslic3r/PrintConfig.cpp:2558
#: src/libslic3r/PrintConfig.cpp:2566
msgid "s"
msgstr "s"

#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr "Volumetrische snelheid"

#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:601
#: src/libslic3r/PrintConfig.cpp:1250
msgid "mm³/s"
msgstr "mm³/s"

#: src/slic3r/GUI/Selection.cpp:146
msgid "Selection-Add"
msgstr "Selectie - Voeg toe"

#: src/slic3r/GUI/Selection.cpp:187
msgid "Selection-Remove"
msgstr "Selectie - Verwijder"

#: src/slic3r/GUI/Selection.cpp:219
msgid "Selection-Add Object"
msgstr "Selectie - Voeg object toe"

#: src/slic3r/GUI/Selection.cpp:238
msgid "Selection-Remove Object"
msgstr "Selectie - Verwijder object"

#: src/slic3r/GUI/Selection.cpp:256
msgid "Selection-Add Instance"
msgstr "Selectie - Voeg instantie toe"

#: src/slic3r/GUI/Selection.cpp:275
msgid "Selection-Remove Instance"
msgstr "Selectie - Verwijder instantie"

#: src/slic3r/GUI/Selection.cpp:376
msgid "Selection-Add All"
msgstr "Selectie - Voeg alle toe"

#: src/slic3r/GUI/Selection.cpp:402
msgid "Selection-Remove All"
msgstr "Selectie - Verwijder alle"

#: src/slic3r/GUI/Selection.cpp:939
msgid "Scale To Fit"
msgstr "Verschaal tot het past"

#: src/slic3r/GUI/Selection.cpp:1475
msgid "Set Printable Instance"
msgstr "Stel printbare instanties in"

#: src/slic3r/GUI/Selection.cpp:1475
msgid "Set Unprintable Instance"
msgstr "Stel instantie in op niet-printbaar"

#: src/slic3r/GUI/SysInfoDialog.cpp:78
msgid "System Information"
msgstr "Systeeminformatie"

#: src/slic3r/GUI/SysInfoDialog.cpp:154
msgid "Copy to Clipboard"
msgstr "Kopieer naar klembord"

#: src/slic3r/GUI/Tab.cpp:52 src/libslic3r/PrintConfig.cpp:265
msgid "Compatible printers"
msgstr "Compatibele printers"

#: src/slic3r/GUI/Tab.cpp:53
msgid "Select the printers this profile is compatible with."
msgstr "Selecteer de printers die compatibel met dit profiel zijn."

#: src/slic3r/GUI/Tab.cpp:58 src/libslic3r/PrintConfig.cpp:280
msgid "Compatible print profiles"
msgstr "Compatibele printprofielen"

#: src/slic3r/GUI/Tab.cpp:59
msgid "Select the print profiles this profile is compatible with."
msgstr "Selecteer de printprofielen die compatibel met dit profiel zijn."

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:135
#, c-format
msgid "Save current %s"
msgstr "Huidige %s opslaan"

#: src/slic3r/GUI/Tab.cpp:136
msgid "Delete this preset"
msgstr "Verwijder preset"

#: src/slic3r/GUI/Tab.cpp:141
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"Beweeg de cursor over de knoppen voor meer informatie\n"
"of klik op deze knop."

#: src/slic3r/GUI/Tab.cpp:243
msgid "Add a new printer"
msgstr "Voeg een nieuwe printer toe"

#: src/slic3r/GUI/Tab.cpp:955
msgid "This is a default preset."
msgstr "Dit is een standaard preset."

#: src/slic3r/GUI/Tab.cpp:957
msgid "This is a system preset."
msgstr "Dit is een systeempreset."

#: src/slic3r/GUI/Tab.cpp:959
msgid "Current preset is inherited from the default preset."
msgstr "Huidige preset is gebaseerd op de standaard preset."

#: src/slic3r/GUI/Tab.cpp:962
#, c-format
msgid ""
"Current preset is inherited from:\n"
"\t%s"
msgstr ""
"Huidige preset is gebaseerd op:\n"
"\t%s"

#: src/slic3r/GUI/Tab.cpp:966
msgid "It can't be deleted or modified."
msgstr "Kan niet verwijderd of aangepast worden."

#: src/slic3r/GUI/Tab.cpp:967
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""
"Eventuele wijzigingen moet worden opgeslagen als een nieuwe preset die is "
"gebaseerd op de huidige."

#: src/slic3r/GUI/Tab.cpp:968
msgid "To do that please specify a new name for the preset."
msgstr "Geef daarvoor een nieuwe naam aan de preset."

#: src/slic3r/GUI/Tab.cpp:972
msgid "Additional information:"
msgstr "Additionele informatie:"

#: src/slic3r/GUI/Tab.cpp:978
msgid "printer model"
msgstr "printermodel"

#: src/slic3r/GUI/Tab.cpp:986
msgid "default print profile"
msgstr "standaard printprofiel"

#: src/slic3r/GUI/Tab.cpp:989
msgid "default filament profile"
msgstr "standaard filamentprofiel"

#: src/slic3r/GUI/Tab.cpp:1003
msgid "default SLA material profile"
msgstr "standaard SLA-materiaalprofiel"

#: src/slic3r/GUI/Tab.cpp:1007
msgid "default SLA print profile"
msgstr "standaard SLA-printprofiel"

#: src/slic3r/GUI/Tab.cpp:1015
msgid "full profile name"
msgstr "volledige profielnaam"

#: src/slic3r/GUI/Tab.cpp:1016
msgid "symbolic profile name"
msgstr "symbolische profielnaam"

#: src/slic3r/GUI/Tab.cpp:1050 src/slic3r/GUI/Tab.cpp:3588
msgid "Layers and perimeters"
msgstr "Lagen en perimeters"

#: src/slic3r/GUI/Tab.cpp:1055
msgid "Vertical shells"
msgstr "Verticale shells"

#: src/slic3r/GUI/Tab.cpp:1066
msgid "Horizontal shells"
msgstr "Horizontale shells"

#: src/slic3r/GUI/Tab.cpp:1067 src/libslic3r/PrintConfig.cpp:1780
msgid "Solid layers"
msgstr "Dichte lagen"

#: src/slic3r/GUI/Tab.cpp:1071
msgid "Minimum shell thickness"
msgstr "Minimale shelldikte"

#: src/slic3r/GUI/Tab.cpp:1082
msgid "Quality (slower slicing)"
msgstr "Kwaliteit (slicen kan langer duren)"

#: src/slic3r/GUI/Tab.cpp:1100
msgid "Reducing printing time"
msgstr "Printtijd verkorten"

#: src/slic3r/GUI/Tab.cpp:1112
msgid "Skirt and brim"
msgstr "Skirt en brim"

#: src/slic3r/GUI/Tab.cpp:1129
msgid "Raft"
msgstr "Raft"

#: src/slic3r/GUI/Tab.cpp:1133
msgid "Options for support material and raft"
msgstr "Opties voor support en raft"

#: src/slic3r/GUI/Tab.cpp:1148
msgid "Speed for print moves"
msgstr "Snelheid voor printbewegingen"

#: src/slic3r/GUI/Tab.cpp:1160
msgid "Speed for non-print moves"
msgstr "Snelheid voor niet-print bewegingen"

#: src/slic3r/GUI/Tab.cpp:1163
msgid "Modifiers"
msgstr "Modificators"

#: src/slic3r/GUI/Tab.cpp:1166
msgid "Acceleration control (advanced)"
msgstr "Acceleraties (geavanceerd)"

#: src/slic3r/GUI/Tab.cpp:1173
msgid "Autospeed (advanced)"
msgstr "Automatische snelheid (geavanceerd)"

#: src/slic3r/GUI/Tab.cpp:1181
msgid "Multiple Extruders"
msgstr "Meerdere extruders"

#: src/slic3r/GUI/Tab.cpp:1189
msgid "Ooze prevention"
msgstr "Druippreventie"

#: src/slic3r/GUI/Tab.cpp:1207
msgid "Extrusion width"
msgstr "Extrusiebreedte"

#: src/slic3r/GUI/Tab.cpp:1217
msgid "Overlap"
msgstr "Overlapping"

#: src/slic3r/GUI/Tab.cpp:1220
msgid "Flow"
msgstr "Stroom"

#: src/slic3r/GUI/Tab.cpp:1229
msgid "Other"
msgstr "Overige"

#: src/slic3r/GUI/Tab.cpp:1232 src/slic3r/GUI/Tab.cpp:3655
msgid "Output options"
msgstr "Output-opties"

#: src/slic3r/GUI/Tab.cpp:1233
msgid "Sequential printing"
msgstr "Achtereenvolgens printen"

#: src/slic3r/GUI/Tab.cpp:1235
msgid "Extruder clearance (mm)"
msgstr "Extruderruimte (mm)"

#: src/slic3r/GUI/Tab.cpp:1240 src/slic3r/GUI/Tab.cpp:3656
msgid "Output file"
msgstr "Outputbestand"

#: src/slic3r/GUI/Tab.cpp:1247 src/libslic3r/PrintConfig.cpp:1453
msgid "Post-processing scripts"
msgstr "Scripts voor nabewerking"

#: src/slic3r/GUI/Tab.cpp:1253 src/slic3r/GUI/Tab.cpp:1254
#: src/slic3r/GUI/Tab.cpp:1542 src/slic3r/GUI/Tab.cpp:1543
#: src/slic3r/GUI/Tab.cpp:2014 src/slic3r/GUI/Tab.cpp:2015
#: src/slic3r/GUI/Tab.cpp:2130 src/slic3r/GUI/Tab.cpp:2131
#: src/slic3r/GUI/Tab.cpp:3525 src/slic3r/GUI/Tab.cpp:3526
msgid "Notes"
msgstr "Opmerkingen"

#: src/slic3r/GUI/Tab.cpp:1260 src/slic3r/GUI/Tab.cpp:1550
#: src/slic3r/GUI/Tab.cpp:2021 src/slic3r/GUI/Tab.cpp:2137
#: src/slic3r/GUI/Tab.cpp:3533 src/slic3r/GUI/Tab.cpp:3661
msgid "Dependencies"
msgstr "Afhankelijkheden"

#: src/slic3r/GUI/Tab.cpp:1261 src/slic3r/GUI/Tab.cpp:1551
#: src/slic3r/GUI/Tab.cpp:2022 src/slic3r/GUI/Tab.cpp:2138
#: src/slic3r/GUI/Tab.cpp:3534 src/slic3r/GUI/Tab.cpp:3662
msgid "Profile dependencies"
msgstr "Profielafhankelijkheden"

#: src/slic3r/GUI/Tab.cpp:1325 src/slic3r/GUI/Tab.cpp:1380
msgid "Filament Overrides"
msgstr "Overschrijven door filament"

#: src/slic3r/GUI/Tab.cpp:1326 src/slic3r/GUI/Tab.cpp:1385
#: src/slic3r/GUI/Tab.cpp:2372
msgid "Retraction"
msgstr "Retractie"

#: src/slic3r/GUI/Tab.cpp:1435 src/libslic3r/PrintConfig.cpp:2067
msgid "Temperature"
msgstr "Temperatuur"

#: src/slic3r/GUI/Tab.cpp:1441
msgid "Bed"
msgstr "Bed"

#: src/slic3r/GUI/Tab.cpp:1446
msgid "Cooling"
msgstr "Koeling"

#: src/slic3r/GUI/Tab.cpp:1447 src/libslic3r/PrintConfig.cpp:1355
#: src/libslic3r/PrintConfig.cpp:2200
msgid "Enable"
msgstr "Toestaan"

#: src/slic3r/GUI/Tab.cpp:1458
msgid "Fan settings"
msgstr "Ventilatorinstellingen"

#: src/slic3r/GUI/Tab.cpp:1467
msgid "Cooling thresholds"
msgstr "Koeldrempels"

#: src/slic3r/GUI/Tab.cpp:1473
msgid "Filament properties"
msgstr "Filamenteigenschappen"

#: src/slic3r/GUI/Tab.cpp:1480
msgid "Print speed override"
msgstr "Printsnelheid overschrijven"

#: src/slic3r/GUI/Tab.cpp:1490
msgid "Wipe tower parameters"
msgstr "Afveegblokparameters"

#: src/slic3r/GUI/Tab.cpp:1493
msgid "Toolchange parameters with single extruder MM printers"
msgstr "Toolwisselparameter voor multi-materialprinters met één extruder"

#: src/slic3r/GUI/Tab.cpp:1507
msgid "Ramming settings"
msgstr "Ramming-instellingen"

#: src/slic3r/GUI/Tab.cpp:1529 src/slic3r/GUI/Tab.cpp:1977
msgid "Custom G-code"
msgstr "Custom G-code"

#: src/slic3r/GUI/Tab.cpp:1530 src/slic3r/GUI/Tab.cpp:1978
#: src/libslic3r/PrintConfig.cpp:1813 src/libslic3r/PrintConfig.cpp:1828
msgid "Start G-code"
msgstr "Start G-code"

#: src/slic3r/GUI/Tab.cpp:1536 src/slic3r/GUI/Tab.cpp:1984
#: src/libslic3r/PrintConfig.cpp:385 src/libslic3r/PrintConfig.cpp:395
msgid "End G-code"
msgstr "Eind G-code"

#: src/slic3r/GUI/Tab.cpp:1593
msgid "Volumetric flow hints not available"
msgstr "Volumetrische stroom - opmerkingen niet beschikbaar"

#: src/slic3r/GUI/Tab.cpp:1679 src/slic3r/GUI/Tab.cpp:1917
msgid "Test"
msgstr "Test"

#: src/slic3r/GUI/Tab.cpp:1689
msgid "Could not get a valid Printer Host reference"
msgstr "Kan geen geldige printerhost-referentie krijgen"

#: src/slic3r/GUI/Tab.cpp:1695 src/slic3r/GUI/Tab.cpp:1930
msgid "Success!"
msgstr "Gelukt!"

#: src/slic3r/GUI/Tab.cpp:1715
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS-CA-bestand is optioneel. Het is alleen nodig als u werkt met een zelf "
"ondertekend certificaat."

#: src/slic3r/GUI/Tab.cpp:1730
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "Certificaatbestanden (*.crt, *.pem)|*.crt;*.pem|Alle betanden|*.*"

#: src/slic3r/GUI/Tab.cpp:1731
msgid "Open CA certificate file"
msgstr "Open een CA-certificaatbestand"

#: src/slic3r/GUI/Tab.cpp:1759
#, c-format
msgid ""
"HTTPS CA File:\n"
"    \tOn this system, %s uses HTTPS certificates from the system Certificate "
"Store or Keychain.\n"
"    \tTo use a custom CA file, please import your CA file into Certificate "
"Store / Keychain."
msgstr ""
"HTTPS-CA-bestand:\n"
"    \t%s gebruikt op dit systeem HTTPS-certificaten van de Certificate Store "
"of Keychain.\n"
"    \tOm een aangepast CA-bestand te gebruiken moet uw CA-bestand in de "
"Certificate Store of Keychain geïmporteerd worden."

#: src/slic3r/GUI/Tab.cpp:1799 src/slic3r/GUI/Tab.cpp:2043
msgid "Size and coordinates"
msgstr "Grootte en coördinaten"

#: src/slic3r/GUI/Tab.cpp:1804 src/slic3r/GUI/Tab.cpp:2048
#: src/slic3r/GUI/Tab.cpp:3166
msgid "Set"
msgstr "Stel in"

#: src/slic3r/GUI/Tab.cpp:1836
msgid "Capabilities"
msgstr "Mogelijkheden"

#: src/slic3r/GUI/Tab.cpp:1841
msgid "Number of extruders of the printer."
msgstr "Aantal extruders van de printer."

#: src/slic3r/GUI/Tab.cpp:1869
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""
"Multi-material met één extruder is geselecteerd.\n"
"Alle extruders moeten daarvoor dezelfde diameter hebben.\n"
"Wilt u de diameters voor alle extruders aanpassen gelijk aan die van de "
"eerste extruder?"

#: src/slic3r/GUI/Tab.cpp:1872 src/slic3r/GUI/Tab.cpp:2342
#: src/libslic3r/PrintConfig.cpp:1326
msgid "Nozzle diameter"
msgstr "Nozzlediameter"

#: src/slic3r/GUI/Tab.cpp:1902
msgid "USB/Serial connection"
msgstr "USB/seriële verbinding"

#: src/slic3r/GUI/Tab.cpp:1903 src/libslic3r/PrintConfig.cpp:1661
msgid "Serial port"
msgstr "Seriële poort"

#: src/slic3r/GUI/Tab.cpp:1908
msgid "Rescan serial ports"
msgstr "Seriële poorten opnieuw scannen"

#: src/slic3r/GUI/Tab.cpp:1930
msgid "Connection to printer works correctly."
msgstr "Verbinding met de printer werkt naar behoren."

#: src/slic3r/GUI/Tab.cpp:1933
msgid "Connection failed."
msgstr "Verbinding mislukt."

#: src/slic3r/GUI/Tab.cpp:1946 src/slic3r/GUI/Tab.cpp:2125
msgid "Print Host upload"
msgstr "Printhost upload"

#: src/slic3r/GUI/Tab.cpp:1990 src/libslic3r/PrintConfig.cpp:153
msgid "Before layer change G-code"
msgstr "G-code die komt vóór de laagwisseling"

#: src/slic3r/GUI/Tab.cpp:1996 src/libslic3r/PrintConfig.cpp:1080
msgid "After layer change G-code"
msgstr "G-code die komt na de laagwisseling"

#: src/slic3r/GUI/Tab.cpp:2002 src/libslic3r/PrintConfig.cpp:2093
msgid "Tool change G-code"
msgstr "Toolwisseling G-code"

#: src/slic3r/GUI/Tab.cpp:2008
msgid "Between objects G-code (for sequential printing)"
msgstr "G-code die komt tussen objecten (bij achtereenvolgens printen)"

#: src/slic3r/GUI/Tab.cpp:2080
msgid "Display"
msgstr "Scherm"

#: src/slic3r/GUI/Tab.cpp:2095
msgid "Tilt"
msgstr "Kanteling"

#: src/slic3r/GUI/Tab.cpp:2096
msgid "Tilt time"
msgstr "Kanteltijd"

#: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:3509
msgid "Corrections"
msgstr "Correcties"

#: src/slic3r/GUI/Tab.cpp:2119 src/slic3r/GUI/Tab.cpp:3505
msgid "Exposure"
msgstr "Belichtingstijd"

#: src/slic3r/GUI/Tab.cpp:2190 src/slic3r/GUI/Tab.cpp:2275
#: src/libslic3r/PrintConfig.cpp:1129 src/libslic3r/PrintConfig.cpp:1146
#: src/libslic3r/PrintConfig.cpp:1163 src/libslic3r/PrintConfig.cpp:1179
#: src/libslic3r/PrintConfig.cpp:1189 src/libslic3r/PrintConfig.cpp:1199
#: src/libslic3r/PrintConfig.cpp:1209
msgid "Machine limits"
msgstr "Machinelimieten"

#: src/slic3r/GUI/Tab.cpp:2204
msgid "Values in this column are for Normal mode"
msgstr "Waarden in deze kolom zijn voor de normale modus"

#: src/slic3r/GUI/Tab.cpp:2205
msgid "Normal"
msgstr "Normaal"

#: src/slic3r/GUI/Tab.cpp:2210
msgid "Values in this column are for Stealth mode"
msgstr "Waarden in deze kolom zijn voor de stille modus"

#: src/slic3r/GUI/Tab.cpp:2211
msgid "Stealth"
msgstr "Stille modus"

#: src/slic3r/GUI/Tab.cpp:2219
msgid "Maximum feedrates"
msgstr "Maximale voedingssnelheden"

#: src/slic3r/GUI/Tab.cpp:2224
msgid "Maximum accelerations"
msgstr "Maximale acceleraties"

#: src/slic3r/GUI/Tab.cpp:2231
msgid "Jerk limits"
msgstr "Ruklimieten"

#: src/slic3r/GUI/Tab.cpp:2236
msgid "Minimum feedrates"
msgstr "Minimale voedingssnelheden"

#: src/slic3r/GUI/Tab.cpp:2300 src/slic3r/GUI/Tab.cpp:2308
msgid "Single extruder MM setup"
msgstr "Multi-materialsetup met één extruder"

#: src/slic3r/GUI/Tab.cpp:2309
msgid "Single extruder multimaterial parameters"
msgstr "Parameter voor multi-material met één extruder"

#: src/slic3r/GUI/Tab.cpp:2340
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""
"Dit is een multi-materialprinter met één extruder. De diameters van alle "
"extruders worden ingesteld op de nieuwe waarde. Weet u zeker dat u wilt "
"doorgaan?"

#: src/slic3r/GUI/Tab.cpp:2364
msgid "Layer height limits"
msgstr "Laagdiktelimieten"

#: src/slic3r/GUI/Tab.cpp:2369
msgid "Position (for multi-extruder printers)"
msgstr "Positie (voor multi-extruderprinters)"

#: src/slic3r/GUI/Tab.cpp:2375
msgid "Only lift Z"
msgstr "Beweeg alleen Z omhoog"

#: src/slic3r/GUI/Tab.cpp:2388
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""
"Retractie als de tool uit staat (geavanceerde instelling voor multi-"
"extrudersetups)"

#: src/slic3r/GUI/Tab.cpp:2396
msgid "Reset to Filament Color"
msgstr "Reset naar filamentkleur"

#: src/slic3r/GUI/Tab.cpp:2577
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"De afveegoptie is niet beschikbaar als firmwareretractie aanstaat.\n"
"\n"
"Moet deze uitgezet worden om firmwareretractie te gebruiken?"

#: src/slic3r/GUI/Tab.cpp:2579
msgid "Firmware Retraction"
msgstr "Firmwareretractie"

#: src/slic3r/GUI/Tab.cpp:2909
#, c-format
msgid "Default preset (%s)"
msgstr "Standaard preset (%s)"

#: src/slic3r/GUI/Tab.cpp:2910
#, c-format
msgid "Preset (%s)"
msgstr "Preset (%s)"

#: src/slic3r/GUI/Tab.cpp:2927
msgid "has the following unsaved changes:"
msgstr "heeft de volgende niet-opgeslagen wijzigingen:"

#: src/slic3r/GUI/Tab.cpp:2930
msgid "is not compatible with printer"
msgstr "is niet compatibel met printer"

#: src/slic3r/GUI/Tab.cpp:2931
msgid "is not compatible with print profile"
msgstr "is niet compatibel met printprofiel"

#: src/slic3r/GUI/Tab.cpp:2933
msgid "and it has the following unsaved changes:"
msgstr "en het heeft de volgende niet-opgeslagen wijzigingen:"

#: src/slic3r/GUI/Tab.cpp:2937
msgid "Unsaved Changes"
msgstr "Niet-opgeslagen wijzigingen"

#: src/slic3r/GUI/Tab.cpp:3035
msgctxt "PresetName"
msgid "%1% - Copy"
msgstr "%1% - Kopie"

#: src/slic3r/GUI/Tab.cpp:3058
msgid "The supplied name is empty. It can't be saved."
msgstr "De ingevoerde naam is leeg. Kan niet opgeslagen worden."

#: src/slic3r/GUI/Tab.cpp:3063
msgid "Cannot overwrite a system profile."
msgstr "Een systeemprofiel kan niet overschreven worden."

#: src/slic3r/GUI/Tab.cpp:3067
msgid "Cannot overwrite an external profile."
msgstr "Een extern profiel kan niet overschreven worden."

#: src/slic3r/GUI/Tab.cpp:3072
msgid "Preset with name \"%1%\" already exists."
msgstr "Preset met de naam '%1%' bestaat al."

#: src/slic3r/GUI/Tab.cpp:3073
msgid "Replace?"
msgstr "Vervangen?"

#: src/slic3r/GUI/Tab.cpp:3111
msgid "remove"
msgstr "verwijderen"

#: src/slic3r/GUI/Tab.cpp:3111
msgid "delete"
msgstr "verwijderen"

#. TRN  remove/delete
#: src/slic3r/GUI/Tab.cpp:3113
msgid "Are you sure you want to %1% the selected preset?"
msgstr "Weet u zeker dat u de geselecteerde preset %1% wilt?"

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3116
msgid "%1% Preset"
msgstr "Preset %1%"

#: src/slic3r/GUI/Tab.cpp:3242
msgid "LOCKED LOCK"
msgstr "Vergrendeld"

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3244
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""
"geeft aan dat de instellingen gelijk zijn aan de systeemwaarden voor de "
"huidige optiegroep"

#: src/slic3r/GUI/Tab.cpp:3246
msgid "UNLOCKED LOCK"
msgstr "Ontgrendeld"

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3248
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""
"geeft aan dat sommige instellingen zijn veranderd en niet gelijk zijn aan de "
"standaardwaarde voor de huidige optiegroep.\n"
"Klik op het ontgrendeld-pictogram om de instelling te resetten naar de "
"systeemwaarden voor de huidige optiegroep."

#: src/slic3r/GUI/Tab.cpp:3253
msgid "WHITE BULLET"
msgstr "Wit bolletje"

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3255
msgid ""
"for the left button: \tindicates a non-system (or non-default) preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."
msgstr ""
"linker knop: \tgeeft een niet-systeempreset aan,\n"
"rechter knop: \tgeeft aan dat de instelling niet veranderd is."

#: src/slic3r/GUI/Tab.cpp:3258
msgid "BACK ARROW"
msgstr "Pijltje terug"

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3260
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""
"geeft aan dat de instellingen zijn veranderd en niet gelijk zijn aan de "
"laatst opgeslagen preset voor de huidige optiegroep.\n"
"Klik op het pijltje-terug-pictogram om alle instellingen te resetten naar de "
"laatst opgeslagen preset voor de huidige optiegroep."

#: src/slic3r/GUI/Tab.cpp:3270
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""
"Vergrendeld-pictogram geeft aan dat de instellingen gelijk zijn aan de "
"systeemwaarde van de huidige optiegroep"

#: src/slic3r/GUI/Tab.cpp:3272
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""
"Ontgrendeld-pictogram geeft aan dat sommige instellingen zijn veranderd en "
"niet gelijk zijn aan de systeemwaarde voor de huidige optiegroep.\n"
"Klik om alle instellingen voor de huidige optiegroep te resetten naar "
"systeemwaarden."

#: src/slic3r/GUI/Tab.cpp:3275
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr "Het witte bolletje geeft aan dat het geen systeempreset betreft."

#: src/slic3r/GUI/Tab.cpp:3278
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""
"Het witte bolletje geeft aan dat de instelling gelijk is aan de laatst "
"opgeslagen preset voor de huidige optiegroep."

#: src/slic3r/GUI/Tab.cpp:3280
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"Het pijltje-terug-pictogram geeft aan dat de instellingen zijn gewijzigd en "
"niet gelijk zijn aan de laatst opgeslagen preset voor de huidige "
"optiegroep.\n"
"Klik om alle instellingen terug te zetten voor de huidige optiegroep naar de "
"laatst opgeslagen preset."

#: src/slic3r/GUI/Tab.cpp:3286
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""
"Vergrendeld-pictogram geeft aan dat de waarde gelijk is aan de systeemwaarde."

#: src/slic3r/GUI/Tab.cpp:3287
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""
"Ontgrendeld-pictogram geeft aan dat de waarde is veranderd en niet gelijk is "
"aan de systeemwaarde.\n"
"Klik om de huidige waarde te resetten naar de systeemwaarde."

#: src/slic3r/GUI/Tab.cpp:3293
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""
"Het witte bolletje geeft aan dat de waarde gelijk is aan de laatst "
"opgeslagen preset."

#: src/slic3r/GUI/Tab.cpp:3294
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"Het pijltje-terug-pictogram geeft aan dat de waarde is veranderd en niet "
"gelijk is aan de laatst opgeslagen preset.\n"
"Klik om de waarde te resetten naar de laatst opgeslagen preset."

#. TRN Preset
#: src/slic3r/GUI/Tab.cpp:3407
#, c-format
msgid "Save %s as:"
msgstr "%s opslaan als:"

#: src/slic3r/GUI/Tab.cpp:3451
msgid "the following suffix is not allowed:"
msgstr "het volgende achtervoegsel is niet toegestaan:"

#: src/slic3r/GUI/Tab.cpp:3455
msgid "The supplied name is not available."
msgstr "De ingevoerde naam is niet beschikbaar."

#: src/slic3r/GUI/Tab.cpp:3468 src/slic3r/GUI/Tab.cpp:3470
msgid "Material"
msgstr "Materiaal"

#: src/slic3r/GUI/Tab.cpp:3598
msgid "Support head"
msgstr "Supportkop"

#: src/slic3r/GUI/Tab.cpp:3603
msgid "Support pillar"
msgstr "Supportpijler"

#: src/slic3r/GUI/Tab.cpp:3617
msgid "Connection of the support sticks and junctions"
msgstr "Verbindingen van de supporttakken en kruisingen"

#: src/slic3r/GUI/Tab.cpp:3622
msgid "Automatic generation"
msgstr "Automatisch genereren"

#: src/slic3r/GUI/Tab.hpp:327 src/slic3r/GUI/Tab.hpp:430
msgid "Print Settings"
msgstr "Printinstellingen"

#: src/slic3r/GUI/Tab.hpp:354
msgid "Filament Settings"
msgstr "Filamentinstellingen"

#: src/slic3r/GUI/Tab.hpp:390
msgid "Printer Settings"
msgstr "Printerinstellingen"

#: src/slic3r/GUI/Tab.hpp:415
msgid "Material Settings"
msgstr "Materiaalinstellingen"

#: src/slic3r/GUI/Tab.hpp:442
msgid "Save preset"
msgstr "Preset opslaan"

#: src/slic3r/GUI/UpdateDialogs.cpp:38
msgid "Update available"
msgstr "Update beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:38
#, c-format
msgid "New version of %s is available"
msgstr "Nieuwe versie van %s beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:43
msgid "Current version:"
msgstr "Huidige versie:"

#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "New version:"
msgstr "Nieuwe versie:"

#: src/slic3r/GUI/UpdateDialogs.cpp:53
msgid "Changelog && Download"
msgstr "Wijzigingslogboek && Download"

#: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125
#: src/slic3r/GUI/UpdateDialogs.cpp:183
msgid "Open changelog page"
msgstr "Open wijzigingslogboekpagina"

#: src/slic3r/GUI/UpdateDialogs.cpp:65
msgid "Open download page"
msgstr "Open downloadpagina"

#: src/slic3r/GUI/UpdateDialogs.cpp:71
msgid "Don't notify about new releases any more"
msgstr "Geef geen meldingen over nieuwe versies meer"

#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266
msgid "Configuration update"
msgstr "Configuratie-update"

#: src/slic3r/GUI/UpdateDialogs.cpp:89
msgid "Configuration update is available"
msgstr "Er is een configuratie-update beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:92
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"Wilt u het installeren?\n"
"\n"
"Er wordt eerst een configuratiesnapshot gemaakt. Deze kan op elk moment "
"hersteld worden en zal geen probleem geven bij nieuwere versies.\n"
"\n"
"Geüpdatete configuratiebundels:"

#: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173
msgid "Comment:"
msgstr "Opmerking:"

#: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210
#, c-format
msgid "%s incompatibility"
msgstr "%s incompatibiliteit"

#: src/slic3r/GUI/UpdateDialogs.cpp:148
msgid "Is necessary to install a configuration update. "
msgstr "Het is noodzakelijk een configuratie-update te installeren. "

#: src/slic3r/GUI/UpdateDialogs.cpp:151
#, c-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"%s zal nu updates starten, anders is het niet mogelijk dit programma correct "
"te draaien.\n"
"\n"
"Vooraf wordt een volledige configuratiesnapshot gemaakt. Het kan dan altijd "
"hersteld worden, mochten de updates problemen geven met de nieuwe versie.\n"
"\n"
"Geüpdatete configuratiebundels:"

#: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246
#, c-format
msgid "Exit %s"
msgstr "%s afsluiten"

#: src/slic3r/GUI/UpdateDialogs.cpp:211
#, c-format
msgid "%s configuration is incompatible"
msgstr "%s configuratie is niet compatibel"

#: src/slic3r/GUI/UpdateDialogs.cpp:216
#, c-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""
"Deze versie van %s is niet compatibel met de huidig geïnstalleerde "
"configuratiebundels.\n"
"Dit kan mogelijk ontstaan als resultaat van het draaien van een ouder %s na "
"het gebruik van een nieuwere.\n"
"\n"
"U kunt kiezen om %s af te sluiten en opnieuw te proberen met een nieuwere "
"versie of de startconfiguratie opnieuw te draaien. In geval van dat laatste "
"wordt een backup-snapshot gemaakt van de bestaande configuratie voor het "
"installeren van bestanden die compatibel zijn met deze %s."

#: src/slic3r/GUI/UpdateDialogs.cpp:225
#, c-format
msgid "This %s version: %s"
msgstr "Deze %s versie: %s"

#: src/slic3r/GUI/UpdateDialogs.cpp:230
msgid "Incompatible bundles:"
msgstr "Incompatibele bundels:"

#: src/slic3r/GUI/UpdateDialogs.cpp:249
msgid "Re-configure"
msgstr "Herconfigureer"

#: src/slic3r/GUI/UpdateDialogs.cpp:270
#, c-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""
"%s gebruikt nu een geüpdatete configuratiestructuur.\n"
"\n"
"Presets van het systeem zijn geïntroduceerd. Deze bevatten ingebouwde "
"standaardinstellingen voor meerdere printers. Deze systemen kunnen niet "
"aangepast worden. In plaats daarvan kunt u nu uw eigen presets creëren op "
"basis van een van de preset.\n"
"Een overgenomen preset kan een bepaalde waarde van bovenliggende "
"instellingen meekrijgen, maar ook overschrijven met een aangepaste waarde.\n"
"\n"
"Ga verdere met de %s die volgt om de nieuwe presets in te stellen en om te "
"kiezen of automatische presets moeten worden ingeschakeld."

#: src/slic3r/GUI/UpdateDialogs.cpp:286
msgid "For more information please visit our wiki page:"
msgstr "Voor meer informatie kunt u naar onze wiki-pagina gaan:"

#: src/slic3r/GUI/UpdateDialogs.cpp:303
msgid "Configuration updates"
msgstr "Configuratie-updates"

#: src/slic3r/GUI/UpdateDialogs.cpp:303
msgid "No updates aviable"
msgstr "Geen updates beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:308
#, c-format
msgid "%s has no configuration updates aviable."
msgstr "%s heeft geen beschikbare configuratie-updates."

#: src/slic3r/GUI/WipeTowerDialog.cpp:15
msgid "Ramming customization"
msgstr "Ramming aanpassen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:41
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"Ramming wordt gebruikt voor het snel extruderen vlak voor een toolwissel in "
"multi-materialprinters met één extruder. Het doel daarvan is om het einde "
"van het ongeladen filament goed te vormen (zodat het later weer geladen kan "
"worden) en nieuwe filament niet verhinderd wordt. Deze fase is belangrijk. "
"Verschillende materialen vereisen verschillende extrusiesnelheden voor de "
"juiste vorm. Daarom zijn de waarden tijdens de ramming aan te passen.\n"
"\n"
"Dit is een expert-level instelling. Onjuiste aanpassingen kunnen zorgen voor "
"verstoppingen en andere problemen."

#: src/slic3r/GUI/WipeTowerDialog.cpp:83
msgid "Total ramming time"
msgstr "Totale ramming-tijd"

#: src/slic3r/GUI/WipeTowerDialog.cpp:85
msgid "Total rammed volume"
msgstr "Totaal ramming-volume"

#: src/slic3r/GUI/WipeTowerDialog.cpp:89
msgid "Ramming line width"
msgstr "Lijnbreedte voor ramming"

#: src/slic3r/GUI/WipeTowerDialog.cpp:91
msgid "Ramming line spacing"
msgstr "Lijnafstand voor ramming"

#: src/slic3r/GUI/WipeTowerDialog.cpp:142
msgid "Wipe tower - Purging volume adjustment"
msgstr "Afveegblok - afveegvolume aanpassen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:254
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""
"Hier kunt u het benodigde afveegvolume (mm³) voor elk soort tool aanpassen."

#: src/slic3r/GUI/WipeTowerDialog.cpp:255
msgid "Extruder changed to"
msgstr "Extruder veranderd naar"

#: src/slic3r/GUI/WipeTowerDialog.cpp:263
msgid "unloaded"
msgstr "ontladen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:264
msgid "loaded"
msgstr "geladen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:276
msgid "Tool #"
msgstr "Tool #"

#: src/slic3r/GUI/WipeTowerDialog.cpp:285
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""
"Totaal afveegvolume dat de som is van de twee onderstaande waarden, "
"afhankelijk van welke tools zijn geladen/ontladen."

#: src/slic3r/GUI/WipeTowerDialog.cpp:286
msgid "Volume to purge (mm³) when the filament is being"
msgstr "Afveegvolume (mm³) als het filament wordt gebruikt"

#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "From"
msgstr "Van"

#: src/slic3r/GUI/WipeTowerDialog.cpp:365
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""
"Overschakelen naar eenvoudige modus zorgt dat de gewijzigde instellingen uit "
"de geavanceerde modus vervallen!\n"
"\n"
"Weet u zeker dat u wilt doorgaan?"

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show simplified settings"
msgstr "Toon eenvoudige instellingen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show advanced settings"
msgstr "Toon geavanceerde instellingen"

#: src/slic3r/GUI/wxExtensions.cpp:703
#, c-format
msgid "Switch to the %s mode"
msgstr "Schakel over naar de %s modus"

#: src/slic3r/GUI/wxExtensions.cpp:704
#, c-format
msgid "Current mode is %s"
msgstr "Huidige modus is: %s"

#: src/slic3r/Utils/AstroBox.cpp:68 src/slic3r/Utils/OctoPrint.cpp:68
#, c-format
msgid "Mismatched type of print host: %s"
msgstr "Onjuist type printhost: %s"

#: src/slic3r/Utils/AstroBox.cpp:83
msgid "Connection to AstroBox works correctly."
msgstr "Verbinding met AstroBox werkt naar behoren."

#: src/slic3r/Utils/AstroBox.cpp:89
msgid "Could not connect to AstroBox"
msgstr "Kan niet verbinden met AstroBox"

#: src/slic3r/Utils/AstroBox.cpp:89
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr "Let op: AstroBox-versie 1.1.0 is tenminste vereist."

#: src/slic3r/Utils/Duet.cpp:49
msgid "Connection to Duet works correctly."
msgstr "Verbinding met Duet werkt naar behoren."

#: src/slic3r/Utils/Duet.cpp:54
msgid "Could not connect to Duet"
msgstr "Kan niet verbinden met Duet"

#: src/slic3r/Utils/Duet.cpp:82 src/slic3r/Utils/Duet.cpp:137
#: src/slic3r/Utils/FlashAir.cpp:119 src/slic3r/Utils/FlashAir.cpp:140
#: src/slic3r/Utils/FlashAir.cpp:156
msgid "Unknown error occured"
msgstr "Onbekende fout opgetreden"

#: src/slic3r/Utils/Duet.cpp:131
msgid "Wrong password"
msgstr "Verkeerd wachtwoord"

#: src/slic3r/Utils/Duet.cpp:134
msgid "Could not get resources to create a new connection"
msgstr "Kan geen middelen krijgen om nieuwe verbinding te maken"

#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr "Exporteer bronmodel"

#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr "Laden van het model mislukt."

#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr "Repareer model met de NetFabb-service"

#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr "Mesh-reparatie mislukt."

#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Loading repaired model"
msgstr "Gerepareerd model aan het laden"

#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr "Opslaan van mesh in 3MF-container mislukt."

#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr "Model repareren"

#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model..."
msgstr "Model exporteren..."

#: src/slic3r/Utils/FixModelByWin10.cpp:368
msgid "Export of a temporary 3mf file failed"
msgstr "Exporteren van tijdelijk 3MF-bestand mislukt"

#: src/slic3r/Utils/FixModelByWin10.cpp:383
msgid "Import of the repaired 3mf file failed"
msgstr "Importeren van het gerepareerde 3MF-bestand mislukt"

#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Repaired 3MF file does not contain any object"
msgstr "Gerepareerd 3MF-bestand bevat geen object"

#: src/slic3r/Utils/FixModelByWin10.cpp:387
msgid "Repaired 3MF file contains more than one object"
msgstr "Gerepareerd 3MF-bestand bevat meer dan 1 object"

#: src/slic3r/Utils/FixModelByWin10.cpp:389
msgid "Repaired 3MF file does not contain any volume"
msgstr "Gerepareerd 3MF-bestand bevat geen volume"

#: src/slic3r/Utils/FixModelByWin10.cpp:391
msgid "Repaired 3MF file contains more than one volume"
msgstr "Gerepareerd 3MF-bestand bevat meer dan 1 volume"

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Model repair finished"
msgstr "Model repareren voltooid"

#: src/slic3r/Utils/FixModelByWin10.cpp:406
msgid "Model repair canceled"
msgstr "Model repareren geannuleerd"

#: src/slic3r/Utils/FixModelByWin10.cpp:423
msgid "Model repaired successfully"
msgstr "Model repareren was succesvol"

#: src/slic3r/Utils/FixModelByWin10.cpp:423
#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model Repair by the Netfabb service"
msgstr "Model repareren met de NetFabb-service"

#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model repair failed:"
msgstr "Model repareren mislukt:"

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr "Uploaden naar een FlashAir-kaart niet toegestaan."

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr "Verbinding met FlashAir werkt naar behoren en uploaden is toegestaan."

#: src/slic3r/Utils/FlashAir.cpp:73
msgid "Could not connect to FlashAir"
msgstr "Kan niet verbinden met FlashAir"

#: src/slic3r/Utils/FlashAir.cpp:73
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""
"Let op: FlashAir met firmware 2.00.02 (of nieuwer) en een geactiveerde "
"upload zijn vereist."

#: src/slic3r/Utils/OctoPrint.cpp:83
msgid "Connection to OctoPrint works correctly."
msgstr "Verbinding met OctoPrint werkt naar behoren."

#: src/slic3r/Utils/OctoPrint.cpp:89
msgid "Could not connect to OctoPrint"
msgstr "Kan niet verbinden met OctoPrint"

#: src/slic3r/Utils/OctoPrint.cpp:89
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "Let op: de minimaal vereiste versie van OctoPrint is 1.1.0."

#: src/slic3r/Utils/OctoPrint.cpp:176
msgid "Connection to Prusa SL1 works correctly."
msgstr "Verbinding met Prusa SL1 werkt naar behoren."

#: src/slic3r/Utils/OctoPrint.cpp:181
msgid "Could not connect to Prusa SLA"
msgstr "Kan niet verbinden met Prusa SLA"

#: src/slic3r/Utils/PresetUpdater.cpp:705
#, c-format
msgid "requires min. %s and max. %s"
msgstr "vereist minimaal %s en maximaal %s"

#: src/slic3r/Utils/PresetUpdater.cpp:710
#, c-format
msgid "requires min. %s"
msgstr "vereist minimaal %s"

#: src/slic3r/Utils/PresetUpdater.cpp:713
#, c-format
msgid "requires max. %s"
msgstr "vereist maximaal %s"

#: src/libslic3r/SLA/Pad.cpp:691
msgid "Pad brim size is too small for the current configuration."
msgstr "Brimgrootte is te klein voor de huidige configuratie."

#: src/libslic3r/Zipper.cpp:32
msgid "undefined error"
msgstr "onbekende fout"

#: src/libslic3r/Zipper.cpp:34
msgid "too many files"
msgstr "te veel bestanden"

#: src/libslic3r/Zipper.cpp:36
msgid "file too large"
msgstr "bestand te groot"

#: src/libslic3r/Zipper.cpp:38
msgid "unsupported method"
msgstr "niet-ondersteunde methode"

#: src/libslic3r/Zipper.cpp:40
msgid "unsupported encryption"
msgstr "niet-ondersteunde encryptie"

#: src/libslic3r/Zipper.cpp:42
msgid "unsupported feature"
msgstr "niet-ondersteunde optie"

#: src/libslic3r/Zipper.cpp:44
msgid "failed finding central directory"
msgstr "centrale map niet gevonden"

#: src/libslic3r/Zipper.cpp:46
msgid "not a ZIP archive"
msgstr "geen ZIP-archief"

#: src/libslic3r/Zipper.cpp:48
msgid "invalid header or archive is corrupted"
msgstr "ongeldige koptekst of het archief is beschadigd"

#: src/libslic3r/Zipper.cpp:50
msgid "unsupported multidisk archive"
msgstr "niet-ondersteund multi-disk archief"

#: src/libslic3r/Zipper.cpp:52
msgid "decompression failed or archive is corrupted"
msgstr "decompressie mislukt of archief is beschadigd"

#: src/libslic3r/Zipper.cpp:54
msgid "compression failed"
msgstr "compressie mislukt"

#: src/libslic3r/Zipper.cpp:56
msgid "unexpected decompressed size"
msgstr "onverwachte gedecomprimeerde grootte"

#: src/libslic3r/Zipper.cpp:58
msgid "CRC-32 check failed"
msgstr "CRC-32 check mislukt"

#: src/libslic3r/Zipper.cpp:60
msgid "unsupported central directory size"
msgstr "niet-ondersteunde centrale mapgrootte"

#: src/libslic3r/Zipper.cpp:62
msgid "allocation failed"
msgstr "toewijzing mislukt"

#: src/libslic3r/Zipper.cpp:64
msgid "file open failed"
msgstr "bestand openen mislukt"

#: src/libslic3r/Zipper.cpp:66
msgid "file create failed"
msgstr "bestand creëren mislukt"

#: src/libslic3r/Zipper.cpp:68
msgid "file write failed"
msgstr "bestand schrijven mislukt"

#: src/libslic3r/Zipper.cpp:70
msgid "file read failed"
msgstr "bestand lezen mislukt"

#: src/libslic3r/Zipper.cpp:72
msgid "file close failed"
msgstr "bestand sluiten mislukt"

#: src/libslic3r/Zipper.cpp:74
msgid "file seek failed"
msgstr "bestand zoeken mislukt"

#: src/libslic3r/Zipper.cpp:76
msgid "file stat failed"
msgstr "bestandsstatus mislukt"

#: src/libslic3r/Zipper.cpp:78
msgid "invalid parameter"
msgstr "ongeldige parameter"

#: src/libslic3r/Zipper.cpp:80
msgid "invalid filename"
msgstr "ongeldige bestandsnaam"

#: src/libslic3r/Zipper.cpp:82
msgid "buffer too small"
msgstr "buffer te klein"

#: src/libslic3r/Zipper.cpp:84
msgid "internal error"
msgstr "interne fout"

#: src/libslic3r/Zipper.cpp:86
msgid "file not found"
msgstr "bestand niet gevonden"

#: src/libslic3r/Zipper.cpp:88
msgid "archive is too large"
msgstr "archief te groot"

#: src/libslic3r/Zipper.cpp:90
msgid "validation failed"
msgstr "validatie mislukt"

#: src/libslic3r/Zipper.cpp:92
msgid "write calledback failed"
msgstr "terugschrijven mislukt"

#: src/libslic3r/Zipper.cpp:102
msgid "Error with zip archive"
msgstr "Fout bij ZIP-archief"

#: src/libslic3r/GCode.cpp:637
msgid "Empty layers detected, the output would not be printable."
msgstr "Lege lagen gedetecteerd. De output is mogelijk niet-printbaar."

#: src/libslic3r/GCode.cpp:638
msgid "Print z"
msgstr "Print Z"

#: src/libslic3r/GCode.cpp:639
msgid ""
"This is usually caused by negligibly small extrusions or by a faulty model. "
"Try to repair  the model or change its orientation on the bed."
msgstr ""
"Dit komt meestal voor bij verwaarloosbare extrusiehoeveelheden of door een "
"foutief model. Probeer het model te repareren of verander de oriëntatie."

#: src/libslic3r/ExtrusionEntity.cpp:323
msgid "Mixed"
msgstr "Gemengd"

#: src/libslic3r/Flow.cpp:61
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""
"Kan de extrusiebreedte niet berekenen voor %1%: Variabele '%2%' niet "
"beschikbaar."

#: src/libslic3r/Format/3mf.cpp:1630
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""
"Het geselecteerde 3MF-bestand is opgeslagen in een nieuwere versie van %1% "
"en is niet compatibel."

#: src/libslic3r/Format/AMF.cpp:934
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""
"Het geselecteerde AMF-bestand is opgeslagen in een nieuwere versie van %1% "
"en is niet compatibel."

#: src/libslic3r/Print.cpp:1219
msgid "All objects are outside of the print volume."
msgstr "Alle objecten bevinden zich buiten het printvolume."

#: src/libslic3r/Print.cpp:1222
msgid "The supplied settings will cause an empty print."
msgstr "De ingevoerde instellingen resulteren in een lege print."

#: src/libslic3r/Print.cpp:1226
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""
"Sommige objecten staan te dicht op elkaar. De extruder zal er tegenaan "
"botsen."

#: src/libslic3r/Print.cpp:1228
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""
"Sommige objecten zijn te groot en kunnen niet geprint worden zonder "
"botsingen."

#: src/libslic3r/Print.cpp:1237
msgid "The Spiral Vase option can only be used when printing a single object."
msgstr "De spiraalmodus kan alleen gebruikt worden voor enkeldelige objecten."

#: src/libslic3r/Print.cpp:1244
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""
"De spiraalmodus kan alleen gebruikt worden met enkel-materiaal objecten."

#: src/libslic3r/Print.cpp:1257
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""
"Het afveegblok wordt alleen ondersteunt als alle extruders dezelfde nozzle- "
"en filamentdiameter hebben."

#: src/libslic3r/Print.cpp:1262
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."
msgstr ""
"Het afveegblok wordt alleen ondersteunt in Marlin, RepRap/Sprinter en "
"Repetier G-code-soorten."

#: src/libslic3r/Print.cpp:1264
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""
"Het afveegblok wordt alleen ondersteunt met de relatieve extruderinstelling "
"('use_relative_e_distances' = 1)."

#: src/libslic3r/Print.cpp:1266
msgid "Ooze prevention is currently not supported with the wipe tower enabled."
msgstr ""
"Druippreventie wordt niet ondersteund als het afveegblok is geactiveerd."

#: src/libslic3r/Print.cpp:1268
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""
"Het afveegblok niet ondersteunt bij volumetrische extrusiewaarden "
"('use_volumetric_e' = 0)."

#: src/libslic3r/Print.cpp:1270
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""
"Het afveegblok wordt momenteel niet ondersteund voor multi-materiaal "
"achtereenvolgens printen."

#: src/libslic3r/Print.cpp:1291
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als deze een "
"gelijke laagdikte hebben"

#: src/libslic3r/Print.cpp:1293
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als deze op "
"een gelijk aantal raftlagen zijn geplaatst"

#: src/libslic3r/Print.cpp:1295
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als de "
"instelling 'support_material_contact_distance' gelijk staat"

#: src/libslic3r/Print.cpp:1297
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als ze "
"tegelijk gesliced worden."

#: src/libslic3r/Print.cpp:1339
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""
"Het afveegblok wordt alleen ondersteunt als alle objecten dezelfde variabele "
"laagdikte hebben"

#: src/libslic3r/Print.cpp:1365
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""
"Een of meer objecten staan ingesteld op een extruder die de printer niet "
"heeft."

#: src/libslic3r/Print.cpp:1374
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr "%1%=%2% mm is te weinig om te printen bij een laagdikte van %3% mm"

#: src/libslic3r/Print.cpp:1377
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr "Te veel %1%=%2% mm om te printen met een nozzlediameter van %3% mm"

#: src/libslic3r/Print.cpp:1388
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""
"Printen met meerdere extruders met verschillende nozzlediameters. Als "
"support met de huidige extruder geprint moet worden, moeten alle nozzles "
"dezelfde diameter hebben ('support_material_extruder' = 0 of "
"'support_material_interface_extruder' = 0)."

#: src/libslic3r/Print.cpp:1396
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""
"Om het afveegblok te laten samenwerken met oplosbare support, moeten de "
"supportlagen gesynchroniseerd worden met de objectlagen."

#: src/libslic3r/Print.cpp:1400
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"Het afveegblok ondersteunt alleen niet-oplosbaar support als dat geprint "
"worden met de huidige extruder zonder toolwissel (Zet zowel "
"'support_material_extruder' en 'support_material_interface_extruder' op 0)."

#: src/libslic3r/Print.cpp:1422
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""
"Laagdikte van de eerste laag kan niet groter zijn dan de nozzlediameter"

#: src/libslic3r/Print.cpp:1427
msgid "Layer height can't be greater than nozzle diameter"
msgstr "Laagdikte kan niet groter zijn dan de nozzlediameter"

#: src/libslic3r/Print.cpp:1584
msgid "Infilling layers"
msgstr "Vullingslagen"

#: src/libslic3r/Print.cpp:1606
msgid "Generating skirt"
msgstr "Skirt genereren"

#: src/libslic3r/Print.cpp:1614
msgid "Generating brim"
msgstr "Brim genereren"

#: src/libslic3r/Print.cpp:1638
msgid "Exporting G-code"
msgstr "G-code exporteren"

#: src/libslic3r/Print.cpp:1642
msgid "Generating G-code"
msgstr "G-code genereren"

#: src/libslic3r/SLAPrint.cpp:613
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""
"Kan niet doorgaan zonder supportpunten! Voeg supportpunten toe of schakel "
"supportgeneratie uit."

#: src/libslic3r/SLAPrint.cpp:625
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""
"Verhoging is te klein voor het object. Gebruik de 'Basisplaat rondom object'-"
"optie om het object zonder verhoging te printen."

#: src/libslic3r/SLAPrint.cpp:631
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""
"De uiteinden van de pijlers worden ingezet op de gaten tussen het object en "
"de basisplaat. De instelling 'Veilige afstand voor supportbasis' moet groter "
"zijn dan de 'Basisplaat-objectgat'-parameter hiervoor."

#: src/libslic3r/SLAPrint.cpp:646
msgid "Exposition time is out of printer profile bounds."
msgstr "De belichtingstijd valt buiten de grenzen van het printerprofiel."

#: src/libslic3r/SLAPrint.cpp:653
msgid "Initial exposition time is out of printer profile bounds."
msgstr "Initiële belichtingstijd valt buiten de printerprofielgrenzen."

#: src/libslic3r/SLAPrint.cpp:760
msgid "Slicing done"
msgstr "Slicen voltooid"

#: src/libslic3r/SLAPrintSteps.cpp:43
msgid "Hollowing model"
msgstr "Model uithollen"

#: src/libslic3r/SLAPrintSteps.cpp:44
msgid "Drilling holes into model."
msgstr "Afvoergaten toevoegen."

#: src/libslic3r/SLAPrintSteps.cpp:45
msgid "Slicing model"
msgstr "Model slicen"

#: src/libslic3r/SLAPrintSteps.cpp:46 src/libslic3r/SLAPrintSteps.cpp:356
msgid "Generating support points"
msgstr "Supportpunten genereren"

#: src/libslic3r/SLAPrintSteps.cpp:47
msgid "Generating support tree"
msgstr "Supportboom genereren"

#: src/libslic3r/SLAPrintSteps.cpp:48
msgid "Generating pad"
msgstr "Basisplaat genereren"

#: src/libslic3r/SLAPrintSteps.cpp:49
msgid "Slicing supports"
msgstr "Support slicen"

#: src/libslic3r/SLAPrintSteps.cpp:64
msgid "Merging slices and calculating statistics"
msgstr "Slices samenvoegen en statistieken berekenen"

#: src/libslic3r/SLAPrintSteps.cpp:65
msgid "Rasterizing layers"
msgstr "Lagen roosteren"

#: src/libslic3r/SLAPrintSteps.cpp:190
msgid "Too much overlapping holes."
msgstr "Te veel overlappende gaten."

#: src/libslic3r/SLAPrintSteps.cpp:199
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""
"Afvoergaten toevoegen mislukt. Dit komt meestal door een incorrect model. "
"Probeer die eerst te repareren."

#: src/libslic3r/SLAPrintSteps.cpp:245
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""
"Slicen moest gestopt worden door een interne fout: inconsistente slice-index."

#: src/libslic3r/SLAPrintSteps.cpp:413 src/libslic3r/SLAPrintSteps.cpp:422
#: src/libslic3r/SLAPrintSteps.cpp:461
msgid "Visualizing supports"
msgstr "Visualiseer support"

#: src/libslic3r/SLAPrintSteps.cpp:453
msgid "No pad can be generated for this model with the current configuration"
msgstr ""
"Met de huidige configuratie kan voor dit model geen basisplaat gegenereerd "
"worden"

#: src/libslic3r/SLAPrintSteps.cpp:621
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""
"Er zijn niet-printbare objecten. Probeer de supportinstellingen te "
"veranderen om het object printbaar te maken."

#: src/libslic3r/PrintBase.cpp:71
msgid "Failed processing of the output_filename_format template."
msgstr "Verwerken van de 'output_filename_format'-template mislukt."

#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
msgid "Printer technology"
msgstr "Printertechnologie"

#: src/libslic3r/PrintConfig.cpp:51
msgid "Bed shape"
msgstr "Bedvorm"

#: src/libslic3r/PrintConfig.cpp:56
msgid "Bed custom texture"
msgstr "Custom bedtextuur"

#: src/libslic3r/PrintConfig.cpp:61
msgid "Bed custom model"
msgstr "Custom bedmodel"

#: src/libslic3r/PrintConfig.cpp:66
msgid "Picture sizes to be stored into a .gcode and .sl1 files"
msgstr "Afbeeldingsgrootte om op te slaan in gcode- en SL1-bestanden"

#: src/libslic3r/PrintConfig.cpp:73
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"Deze instelling is voor de laagdikte (en dus het totaal aantal lagen). "
"Dunnere lagen geven een betere nauwkeurigheid, maar het printen duurt langer."

#: src/libslic3r/PrintConfig.cpp:80
msgid "Max print height"
msgstr "Maximale printhoogte"

#: src/libslic3r/PrintConfig.cpp:81
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""
"Stel dit in als maximale hoogte die bereikt kan worden door de printer."

#: src/libslic3r/PrintConfig.cpp:87
msgid "Slice gap closing radius"
msgstr "Gatvulradius"

#: src/libslic3r/PrintConfig.cpp:89
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"Gaten die kleiner zijn dan tweemaal de gatvulradius worden opgevuld tijdens "
"het slicen. Het vullen kan zorgen dat de printresolutie minder wordt. Daarom "
"wordt geadviseerd de waarde laag te houden."

#: src/libslic3r/PrintConfig.cpp:97
msgid "Hostname, IP or URL"
msgstr "Hostnaam, IP of URL"

#: src/libslic3r/PrintConfig.cpp:98
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""
"PrusaSlicer kan gcode-bestanden naar een printerhost uploaden. Dit veld moet "
"de hostnaam, IP-adres of URL van de printerhostomgeving bevatten."

#: src/libslic3r/PrintConfig.cpp:104
msgid "API Key / Password"
msgstr "API-key / wachtwoord"

#: src/libslic3r/PrintConfig.cpp:105
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"PrusaSlicer kan gcode-bestanden naar een printerhost uploaden. Dit veld moet "
"de API-key of het wachtwoord voor authenticatie bevatten."

#: src/libslic3r/PrintConfig.cpp:111
msgid "HTTPS CA File"
msgstr "HTTPS-CA-bestand"

#: src/libslic3r/PrintConfig.cpp:112
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""
"Aangepast CA-certificaatbestand kan gespecificeerd worden voor HTTPS-"
"OctoPrint verbindingen in CRT/PEM-formaat. Als er niets wordt ingevuld, "
"wordt de standaard OS-CA-certificaatopslaglocatie gebruikt."

#: src/libslic3r/PrintConfig.cpp:118
msgid "Elephant foot compensation"
msgstr "Squishcompensatie"

#: src/libslic3r/PrintConfig.cpp:120
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""
"De eerste laag wordt verkleind in horizontale richting met de ingestelde "
"waarde ter compensatie van het platdrukken."

#: src/libslic3r/PrintConfig.cpp:136
msgid "Avoid crossing perimeters"
msgstr "Vermijd kruisende perimeters"

#: src/libslic3r/PrintConfig.cpp:137
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"Optimaliseer de bewegingen om kruisende perimeters te minimaliseren. Dit is "
"handig bij Bowden-extruders die gevoelig zijn voor druipen. Deze aanpassing "
"vertraagd zowel de print als de G-code-generatie."

#: src/libslic3r/PrintConfig.cpp:144 src/libslic3r/PrintConfig.cpp:2064
msgid "Other layers"
msgstr "Overige lagen"

#: src/libslic3r/PrintConfig.cpp:145
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""
"Bedtemperatuur voor lagen na de eerste laag. Als dit ingesteld is op 0, "
"worden bedverwarmingscommando's uitgezet."

#: src/libslic3r/PrintConfig.cpp:147
msgid "Bed temperature"
msgstr "Bedtemperatuur"

#: src/libslic3r/PrintConfig.cpp:154
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"Deze custom code wordt toegevoegd bij elke laagwisseling, vlak voor de Z-"
"beweging. U kunt hier variabelen gebruiken voor alle instellingen zoals "
"'layer_num' en 'layer_z'."

#: src/libslic3r/PrintConfig.cpp:164
msgid "Between objects G-code"
msgstr "G-code die komt tussen objecten"

#: src/libslic3r/PrintConfig.cpp:165
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""
"Deze code wordt ingevoegd tussen objecten bij het achtereenvolgens printen. "
"Standaard worden de extruder- en bedtemperatuur gereset met een wacht-niet-"
"commando, hoewel, als M104, M109, M140 of M190 in de custom code worden "
"gedetecteerd zal PrusaSlicer deze commando's niet meenemen. Merk op dat "
"variabelen voor alle instellingen gebruikt kunnen worden."

#: src/libslic3r/PrintConfig.cpp:176
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "Aantal te genereren dichte lagen voor ondervlakken."

#: src/libslic3r/PrintConfig.cpp:177
msgid "Bottom solid layers"
msgstr "Dichte bodemlagen"

#: src/libslic3r/PrintConfig.cpp:185
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""
"Het aantal dichte bodemlagen wordt verhoogd als blijkt dat het nodig is om "
"de minimale bodemshelldikte te garanderen."

#: src/libslic3r/PrintConfig.cpp:187
msgid "Minimum bottom shell thickness"
msgstr "Minimale shelldikte aan de onderzijde"

#: src/libslic3r/PrintConfig.cpp:193
msgid "Bridge"
msgstr "Brug"

#: src/libslic3r/PrintConfig.cpp:194
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor bruggen. Als dit ingesteld is "
"op 0, wordt de acceleratie-instelling voor bruggen uitgezet."

#: src/libslic3r/PrintConfig.cpp:196 src/libslic3r/PrintConfig.cpp:339
#: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:984
#: src/libslic3r/PrintConfig.cpp:1152 src/libslic3r/PrintConfig.cpp:1201
#: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1403
msgid "mm/s²"
msgstr "mm/s²"

#: src/libslic3r/PrintConfig.cpp:202
msgid "Bridging angle"
msgstr "Brughoek"

#: src/libslic3r/PrintConfig.cpp:204
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"Brughoek overschrijven. Als dit ingesteld is op 0, wordt de optimale hoek "
"automatisch berekend, anders wordt de opgegeven hoek voor alle bruggen "
"gebruikt. 180° staat gelijk aan 0°."

#: src/libslic3r/PrintConfig.cpp:207 src/libslic3r/PrintConfig.cpp:780
#: src/libslic3r/PrintConfig.cpp:1640 src/libslic3r/PrintConfig.cpp:1650
#: src/libslic3r/PrintConfig.cpp:1894 src/libslic3r/PrintConfig.cpp:2049
#: src/libslic3r/PrintConfig.cpp:2247 src/libslic3r/PrintConfig.cpp:2727
#: src/libslic3r/PrintConfig.cpp:2848
msgid "°"
msgstr "°"

#: src/libslic3r/PrintConfig.cpp:213
msgid "Bridges fan speed"
msgstr "Ventilatorsnelheid voor bruggen"

#: src/libslic3r/PrintConfig.cpp:214
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr "Deze ventilatorsnelheid wordt aangehouden bij bruggen en overhanging."

#: src/libslic3r/PrintConfig.cpp:215 src/libslic3r/PrintConfig.cpp:792
#: src/libslic3r/PrintConfig.cpp:1219 src/libslic3r/PrintConfig.cpp:1282
#: src/libslic3r/PrintConfig.cpp:1532 src/libslic3r/PrintConfig.cpp:2425
#: src/libslic3r/PrintConfig.cpp:2767
msgid "%"
msgstr "%"

#: src/libslic3r/PrintConfig.cpp:222
msgid "Bridge flow ratio"
msgstr "Brugextrusieverhouding"

#: src/libslic3r/PrintConfig.cpp:224
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"Deze factor beïnvloedt de hoeveelheid plastic voor bruggen. Deze kan "
"verlaagd worden om het extrudaat strak te trekken en doorzakking te "
"voorkomen. Hoewel de systeemwaarden goed zijn, kan geëxperimenteerd worden "
"met de koeling voor dit aangepast wordt."

#: src/libslic3r/PrintConfig.cpp:234
msgid "Bridges"
msgstr "Bruggen"

#: src/libslic3r/PrintConfig.cpp:236
msgid "Speed for printing bridges."
msgstr "Printsnelheid voor bruggen."

#: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:609
#: src/libslic3r/PrintConfig.cpp:617 src/libslic3r/PrintConfig.cpp:626
#: src/libslic3r/PrintConfig.cpp:634 src/libslic3r/PrintConfig.cpp:661
#: src/libslic3r/PrintConfig.cpp:680 src/libslic3r/PrintConfig.cpp:922
#: src/libslic3r/PrintConfig.cpp:1050 src/libslic3r/PrintConfig.cpp:1135
#: src/libslic3r/PrintConfig.cpp:1169 src/libslic3r/PrintConfig.cpp:1181
#: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1241
#: src/libslic3r/PrintConfig.cpp:1300 src/libslic3r/PrintConfig.cpp:1433
#: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1616
#: src/libslic3r/PrintConfig.cpp:2028 src/libslic3r/PrintConfig.cpp:2154
msgid "mm/s"
msgstr "mm/s"

#: src/libslic3r/PrintConfig.cpp:244
msgid "Brim width"
msgstr "Breedte van de brim"

#: src/libslic3r/PrintConfig.cpp:245
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""
"Horizontale breedte van de brim die rond elk object op de eerste laag wordt "
"geprint."

#: src/libslic3r/PrintConfig.cpp:252
msgid "Clip multi-part objects"
msgstr "Meerdelige objecten samenvoegen"

#: src/libslic3r/PrintConfig.cpp:253
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""
"Als meerdere multi-materialobjecten worden geprint, zorgt deze instelling "
"dat PrusaSlicer de overlappende delen met de vorige in de reeks combineert "
"(2e deel wordt gecombineerd met het 1e, 3e deel met het 1e en 2e, etc)."

#: src/libslic3r/PrintConfig.cpp:260
msgid "Colorprint height"
msgstr "Kleurenprinthoogte"

#: src/libslic3r/PrintConfig.cpp:261
msgid "Heights at which a filament change is to occur."
msgstr "Hoogte waarbij de filamentwissel plaatsvindt."

#: src/libslic3r/PrintConfig.cpp:271
msgid "Compatible printers condition"
msgstr "Voorwaarden compatibele printers"

#: src/libslic3r/PrintConfig.cpp:272
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van "
"een actief printerprofiel. Als deze aanduiding op waar staat, wordt dit "
"profiel beschouwd als compatibel met het actieve printerprofiel."

#: src/libslic3r/PrintConfig.cpp:286
msgid "Compatible print profiles condition"
msgstr "Voorwaarden compatibele printprofielen"

#: src/libslic3r/PrintConfig.cpp:287
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van "
"een actief printprofiel. Als deze aanduiding op waar staat, wordt dit "
"profiel beschouwd als compatibel met het actieve printprofiel."

#: src/libslic3r/PrintConfig.cpp:304
msgid "Complete individual objects"
msgstr "Voltooi individuele objecten"

#: src/libslic3r/PrintConfig.cpp:305
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"Als meerdere objecten geprint worden, zorgt deze optie dat de objecten "
"afzonderlijk voltooid worden voordat bewogen wordt naar de volgende. "
"PrusaSlicer voorkomt botsingen van de extruder tegen eerder geprinte "
"objecten en zal u daar ook voor waarschuwen, maar blijf wel alert."

#: src/libslic3r/PrintConfig.cpp:313
msgid "Enable auto cooling"
msgstr "Automatisch koelen toestaan"

#: src/libslic3r/PrintConfig.cpp:314
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""
"Dit vinkje zorgt dat automatisch gekoeld wordt; de print- en "
"ventilatorsnelheid worden aangepast op basis van de laagprinttijd."

#: src/libslic3r/PrintConfig.cpp:319
msgid "Cooling tube position"
msgstr "Koelbuispositie"

#: src/libslic3r/PrintConfig.cpp:320
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr "Afstand vanaf de nozzle tot het middelpunt van de koelbuis."

#: src/libslic3r/PrintConfig.cpp:327
msgid "Cooling tube length"
msgstr "Koelbuislengte"

#: src/libslic3r/PrintConfig.cpp:328
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""
"Lengte van de koelbuis om de ruimte voor koelbewegingen daarin te beperken."

#: src/libslic3r/PrintConfig.cpp:336
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""
"Dit is de acceleratie waarop uw printer wordt ingesteld na een specifieke "
"acceleratiewaarde (perimeters/vulling). Als dit ingesteld is op 0, worden "
"geen acceleratiewaarden opnieuw ingesteld."

#: src/libslic3r/PrintConfig.cpp:345
msgid "Default filament profile"
msgstr "Standaard filamentprofiel"

#: src/libslic3r/PrintConfig.cpp:346
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"Standaard filamentprofiel dat geassocieerd wordt met huidig printerprofiel. "
"Bij selectie van het huidige printerprofiel wordt dit filamentprofiel "
"geactiveerd."

#: src/libslic3r/PrintConfig.cpp:352
msgid "Default print profile"
msgstr "Standaard printprofiel"

#: src/libslic3r/PrintConfig.cpp:353 src/libslic3r/PrintConfig.cpp:2592
#: src/libslic3r/PrintConfig.cpp:2603
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"Standaard printprofiel dat geassocieerd wordt met huidig printerprofiel. Bij "
"selectie van het huidige printerprofiel wordt dit printprofiel geactiveerd."

#: src/libslic3r/PrintConfig.cpp:359
msgid "Disable fan for the first"
msgstr "Zet ventilator uit voor de eerste"

#: src/libslic3r/PrintConfig.cpp:360
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"U kunt dit instellen op een positieve waarde om de ventilator uit te "
"schakelen tijdens het printen van de eerste lagen voor een betere adhesie."

#: src/libslic3r/PrintConfig.cpp:369
msgid "Don't support bridges"
msgstr "Geen support voor bruggen"

#: src/libslic3r/PrintConfig.cpp:371
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr "Experimentele optie om support onder brugvlakken te vermijden."

#: src/libslic3r/PrintConfig.cpp:377
msgid "Distance between copies"
msgstr "Ruimte tussen kopieën"

#: src/libslic3r/PrintConfig.cpp:378
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""
"Afstand die gebruikt wordt tussen objecten bij automatisch rangschikken."

#: src/libslic3r/PrintConfig.cpp:386
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""
"Deze eindprocedure wordt aan het eind van het outputbestand ingevoegd. Merk "
"op dat variabelen voor alle instellingen gebruikt kunnen worden."

#: src/libslic3r/PrintConfig.cpp:396
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""
"Deze eindprocedure is ingevoegd aan het eind van het outputbestand, nog voor "
"de eind G-code (en voor de toolwisselingen). Merk op dat variabelen voor "
"alle instellingen gebruikt kunnen worden. Als de printer meerdere extruders "
"heeft, wordt deze G-code in de extrudervolgorde uitgevoerd."

#: src/libslic3r/PrintConfig.cpp:407
msgid "Ensure vertical shell thickness"
msgstr "Garandeer verticale shelldikte"

#: src/libslic3r/PrintConfig.cpp:409
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""
"Voeg dichte vulling toe bij hellende vlakken om de verticale shelldikte te "
"garanderen."

#: src/libslic3r/PrintConfig.cpp:415
msgid "Top fill pattern"
msgstr "Vulpatroon voor bovenzijde"

#: src/libslic3r/PrintConfig.cpp:417
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""
"Vullingspatroon voor bovenste lagen. Dit heeft alleen invloed op de bovenste "
"zichtbare laag en niet de aangrenzende horizontale dichte shells."

#: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:843
#: src/libslic3r/PrintConfig.cpp:2009
msgid "Rectilinear"
msgstr "Rechtlijnig"

#: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:849
msgid "Concentric"
msgstr "Concentrisch"

#: src/libslic3r/PrintConfig.cpp:427 src/libslic3r/PrintConfig.cpp:853
msgid "Hilbert Curve"
msgstr "Hilbert-kromme"

#: src/libslic3r/PrintConfig.cpp:428 src/libslic3r/PrintConfig.cpp:854
msgid "Archimedean Chords"
msgstr "Archimedes-spiraal"

#: src/libslic3r/PrintConfig.cpp:429 src/libslic3r/PrintConfig.cpp:855
msgid "Octagram Spiral"
msgstr "Octagramspiraal"

#: src/libslic3r/PrintConfig.cpp:435
msgid "Bottom fill pattern"
msgstr "Vulpatroon voor onderzijde"

#: src/libslic3r/PrintConfig.cpp:437
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""
"Vulpatroon voor de bodemlaag. Dit heeft alleen invloed op de onderste "
"zichtbare laag en niet de aangrenzende horizontale dichte shells."

#: src/libslic3r/PrintConfig.cpp:446 src/libslic3r/PrintConfig.cpp:457
msgid "External perimeters"
msgstr "Buitenste perimeters"

#: src/libslic3r/PrintConfig.cpp:448
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de buitenste perimeters. Als die op 0 blijft staan, zal PrusaSlicer de "
"breedte instellen op 1,125x de nozzlediameter. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:560
#: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:895
#: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1041
#: src/libslic3r/PrintConfig.cpp:1423 src/libslic3r/PrintConfig.cpp:1761
#: src/libslic3r/PrintConfig.cpp:1883 src/libslic3r/PrintConfig.cpp:1951
#: src/libslic3r/PrintConfig.cpp:2111
msgid "mm or %"
msgstr "mm of %"

#: src/libslic3r/PrintConfig.cpp:459
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Deze instelling heeft effect op de snelheid van buitenste perimeters. Als "
"dit is uitgedrukt als percentage, wordt deze genomen over de snelheid van de "
"perimeters. Als dit ingesteld is op 0, wordt een automatische snelheid "
"genomen."

#: src/libslic3r/PrintConfig.cpp:462 src/libslic3r/PrintConfig.cpp:904
#: src/libslic3r/PrintConfig.cpp:1720 src/libslic3r/PrintConfig.cpp:1772
#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/PrintConfig.cpp:2124
msgid "mm/s or %"
msgstr "mm/s of %"

#: src/libslic3r/PrintConfig.cpp:469
msgid "External perimeters first"
msgstr "Buitenste perimeters eerst"

#: src/libslic3r/PrintConfig.cpp:471
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""
"Print de buitenste perimeters eerder dan de binnenste in plaats van andersom."

#: src/libslic3r/PrintConfig.cpp:477
msgid "Extra perimeters if needed"
msgstr "Extra perimeters indien nodig"

#: src/libslic3r/PrintConfig.cpp:479
#, no-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""
"Voeg meer perimeters toe als dat nodig is voor het voorkomen van gaten in "
"hellende wanden. PrusaSlicer blijft perimeters toevoegen tot meer dan 70% "
"van de perimeters daarboven direct is ondersteund."

#: src/libslic3r/PrintConfig.cpp:489
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"De extruder die gebruikt wordt (behalve als meer specifieke "
"extruderinstellingen zijn aangegeven). Deze waarde overschrijft de "
"perimeter- en vullingsextruder, maar niet de supportextruders."

#: src/libslic3r/PrintConfig.cpp:501
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""
"Stel dit in als verticale afstand tussen de nozzlepunt en de geleidestangen "
"van de X-as. In andere woorden; dit is de hoogte van de vrijloopcilinder "
"rond de extruder en geeft de maximale diepte weer die de extruder kan halen "
"zonder te botsen met eerder geprinte objecten."

#: src/libslic3r/PrintConfig.cpp:512
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""
"Stel dit in als vrijloopradius rond de extruder. Kies de hoogste waarde "
"(voor de veiligheid) als de extruder niet is gecentreerd. Deze instelling "
"wordt gebruikt om te controleren op botsingen en om te tonen in de 3D-"
"weergave."

#: src/libslic3r/PrintConfig.cpp:522
msgid "Extruder Color"
msgstr "Extruderkleur"

#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:583
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""
"Dit wordt alleen gebruikt in de PrusaSlicer-interface als een visueel "
"hulpmiddel."

#: src/libslic3r/PrintConfig.cpp:529
msgid "Extruder offset"
msgstr "Extruder-offset"

#: src/libslic3r/PrintConfig.cpp:530
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"Als uw firmware extrudercompensatie niet toestaat, kan daar rekening mee "
"gehouden worden in de G-code. Met deze optie kunt u de compensatie per "
"extruder specificeren op basis van de eerste extruder. Hiervoor zijn "
"positieve coördinaten nodig (die worden van de X- en Y-coördinaten "
"afgetrokken)."

#: src/libslic3r/PrintConfig.cpp:539
msgid "Extrusion axis"
msgstr "Extrusie-as"

#: src/libslic3r/PrintConfig.cpp:540
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"Gebruik deze optie om de naam van de as van de extruder in te stellen "
"(normaal gesproken E, maar soms A)."

#: src/libslic3r/PrintConfig.cpp:545
msgid "Extrusion multiplier"
msgstr "Extrusie vermenigvuldigingsfactor"

#: src/libslic3r/PrintConfig.cpp:546
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"Deze factor verandert het debiet proportioneel. U kunt deze fijnstellen om "
"een mooi oppervlak en dunne wanden te krijgen. Waarden liggen normaal tussen "
"0.9 en 1.1. Check eventueel de filamentdiameter en de extruderstappen (uit "
"de firmware) als u denkt dat dit aangepast moet worden."

#: src/libslic3r/PrintConfig.cpp:554
msgid "Default extrusion width"
msgstr "Standaard extrusiebreedte"

#: src/libslic3r/PrintConfig.cpp:556
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte. Als "
"die op 0 blijft staan, zal PrusaSlicer de extrusiebreedte aanpassen op basis "
"van de nozzlediameter. Als dit is uitgedrukt als percentage, wordt dit "
"berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:566
msgid "Keep fan always on"
msgstr "Laat ventilator altijd aan"

#: src/libslic3r/PrintConfig.cpp:567
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""
"Als dit is ingeschakeld zal de ventilator nooit uitgezet worden, maar "
"tenminste de ingestelde minimale snelheid aanhouden."

#: src/libslic3r/PrintConfig.cpp:572
msgid "Enable fan if layer print time is below"
msgstr "Schakel de ventilator in bij een printtijd korter dan"

#: src/libslic3r/PrintConfig.cpp:573
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""
"Als de printtijd voor een laag onder dit aantal seconden komt, zal de "
"ventilator aangezet worden en wordt de snelheid berekend door te "
"interpoleren tussen de minimale en maximale snelheid."

#: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:1708
msgid "approximate seconds"
msgstr "geschat aantal seconden"

#: src/libslic3r/PrintConfig.cpp:588
msgid "Filament notes"
msgstr "Filamentopmerkingen"

#: src/libslic3r/PrintConfig.cpp:589
msgid "You can put your notes regarding the filament here."
msgstr "Hier kunt u opmerkingen over het filament plaatsen."

#: src/libslic3r/PrintConfig.cpp:597 src/libslic3r/PrintConfig.cpp:1247
msgid "Max volumetric speed"
msgstr "Maximale volumetrische snelheid"

#: src/libslic3r/PrintConfig.cpp:598
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"Maximale volumetrische snelheid is toegestaan voor dit filament. Dit beperkt "
"de maximale volumetrische snelheid van een print tot het minimum van de "
"maximale volumetrische snelheid van de print en het filament. Als dit "
"ingesteld is op 0, geldt er geen limiet."

#: src/libslic3r/PrintConfig.cpp:607
msgid "Loading speed"
msgstr "Laadsnelheid"

#: src/libslic3r/PrintConfig.cpp:608
msgid "Speed used for loading the filament on the wipe tower."
msgstr "Snelheid die gebruikt wordt voor het afveegblok."

#: src/libslic3r/PrintConfig.cpp:615
msgid "Loading speed at the start"
msgstr "Laadsnelheid aan het begin"

#: src/libslic3r/PrintConfig.cpp:616
msgid "Speed used at the very beginning of loading phase."
msgstr "Snelheid die gebruikt wordt aan het begin van de laadfase."

#: src/libslic3r/PrintConfig.cpp:623
msgid "Unloading speed"
msgstr "Ontlaadsnelheid"

#: src/libslic3r/PrintConfig.cpp:624
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""
"Snelheid die gebruikt wordt voor het ontladen van het afveegblok (heeft geen "
"effect op het initiële onderdeel van het ontladen direct na de ramming)."

#: src/libslic3r/PrintConfig.cpp:632
msgid "Unloading speed at the start"
msgstr "Ontlaadsnelheid in het begin"

#: src/libslic3r/PrintConfig.cpp:633
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""
"Snelheid die gebruikt wordt voor het ontladen van het filament direct na de "
"ramming."

#: src/libslic3r/PrintConfig.cpp:640
msgid "Delay after unloading"
msgstr "Vertraging na het ontladen"

#: src/libslic3r/PrintConfig.cpp:641
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""
"Wachttijd voor het ontladen van het filament. Dit kan helpen om betrouwbare "
"toolwisselingen te krijgen met flexibele materialen die meer tijd nodig "
"hebben om te krimpen naar de originele afmetingen."

#: src/libslic3r/PrintConfig.cpp:650
msgid "Number of cooling moves"
msgstr "Aantal koelbewegingen"

#: src/libslic3r/PrintConfig.cpp:651
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""
"Het filament wordt gekoeld tijdens het terug en voorwaarts bewegen in de "
"koelbuis. Specificeer het benodigd aantal bewegingen."

#: src/libslic3r/PrintConfig.cpp:659
msgid "Speed of the first cooling move"
msgstr "Snelheid voor de eerste koelbeweging"

#: src/libslic3r/PrintConfig.cpp:660
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""
"Koelbewegingen worden gelijkmatig versneld, beginnend vanaf deze snelheid."

#: src/libslic3r/PrintConfig.cpp:667
msgid "Minimal purge on wipe tower"
msgstr "Minimale afstand op afveegblok"

#: src/libslic3r/PrintConfig.cpp:668
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"Na een toolwissel is de exacte locatie van het geladen filament onbekend en "
"zal de druk op het filament niet stabiel zijn. Voor het afvegen van de "
"printkop in de vulling zal PrusaSlicer eerst deze hoeveelheid materiaal "
"afvegen aan het afveegblok om vervolgens de vulling of overige objecten goed "
"te kunnen printen."

#: src/libslic3r/PrintConfig.cpp:672
msgid "mm³"
msgstr "mm³"

#: src/libslic3r/PrintConfig.cpp:678
msgid "Speed of the last cooling move"
msgstr "Snelheid voor de laatste koelbeweging"

#: src/libslic3r/PrintConfig.cpp:679
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr "Koelbewegingen versnellen gelijkmatig tot aan deze snelheid."

#: src/libslic3r/PrintConfig.cpp:686
msgid "Filament load time"
msgstr "Laadtijd van het filament"

#: src/libslic3r/PrintConfig.cpp:687
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Tijd voor de printerfirmware (of de MMU 2.0) om nieuw filament te laden "
"tijdens een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd "
"wordt toegevoegd aan de totale printtijd in de tijdsschatting."

#: src/libslic3r/PrintConfig.cpp:694
msgid "Ramming parameters"
msgstr "Rammingparameters"

#: src/libslic3r/PrintConfig.cpp:695
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""
"Deze frase is bewerkt door het Rammingdialoog en bevat parameters voor de "
"ramming."

#: src/libslic3r/PrintConfig.cpp:701
msgid "Filament unload time"
msgstr "Ontlaadtijd voor filament"

#: src/libslic3r/PrintConfig.cpp:702
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Tijd voor de printerfirmware (of de MMU 2.0) om filament te ontladen tijdens "
"een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd wordt "
"toegevoegd aan de totale printtijd in de tijdsschatting."

#: src/libslic3r/PrintConfig.cpp:710
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"Stel hier de filamentdiameter in. De juiste precisie is benodigd. Gebruik "
"daarom een schuifmaat en doe meerdere metingen over het hele filament. "
"Bereken vervolgens het gemiddelde."

#: src/libslic3r/PrintConfig.cpp:717 src/libslic3r/PrintConfig.cpp:2503
#: src/libslic3r/PrintConfig.cpp:2504
msgid "Density"
msgstr "Dichtheid"

#: src/libslic3r/PrintConfig.cpp:718
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"Stel hier de dichtheid van het filament in. Dit is slechts voor de "
"statistieken. Formule voor dichtheid: dichtheid[g/cm³] = massa[g] / "
"volume[cm³]. Formule voor volume: volume[cm³] = 1000 * (diameter[mm])² * π / "
"4 * lengte[mm]. Bepaal het gewicht door te wegen en het volume door te meten."

#: src/libslic3r/PrintConfig.cpp:721
msgid "g/cm³"
msgstr "g/cm³"

#: src/libslic3r/PrintConfig.cpp:726
msgid "Filament type"
msgstr "Filamenttype"

#: src/libslic3r/PrintConfig.cpp:727
msgid "The filament material type for use in custom G-codes."
msgstr "Het filamenttype voor het gebruik van de custom G-codes."

#: src/libslic3r/PrintConfig.cpp:754
msgid "Soluble material"
msgstr "Oplosbaar materiaal"

#: src/libslic3r/PrintConfig.cpp:755
msgid "Soluble material is most likely used for a soluble support."
msgstr "Oplosbaar materiaal wordt vaak gebruikt voor oplosbaar support."

#: src/libslic3r/PrintConfig.cpp:761
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""
"Voer hier de filamentkosten per kilogram in. Dit is alleen voor statistische "
"informatie."

#: src/libslic3r/PrintConfig.cpp:762
msgid "money/kg"
msgstr "€/kg"

#: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:2587
msgid "(Unknown)"
msgstr "(Onbekend)"

#: src/libslic3r/PrintConfig.cpp:775
msgid "Fill angle"
msgstr "Vullingshoek"

#: src/libslic3r/PrintConfig.cpp:777
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"Standaard basishoek voor de vullingsrichting. Hier wordt kruislings overheen "
"geprint. Bruggen worden geprint met de optimale richting. Deze instelling "
"zal die richting niet beïnvloeden."

#: src/libslic3r/PrintConfig.cpp:789
msgid "Fill density"
msgstr "Vullingsdichtheid"

#: src/libslic3r/PrintConfig.cpp:791
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""
"Dichtheid van inwendige vulling, uitgedrukt in een percentage (0 - 100%)"

#: src/libslic3r/PrintConfig.cpp:826
msgid "Fill pattern"
msgstr "Vullingspatroon"

#: src/libslic3r/PrintConfig.cpp:828
msgid "Fill pattern for general low-density infill."
msgstr "Vulpatroon voor algemene lagere-dichtheidsvulling."

#: src/libslic3r/PrintConfig.cpp:844
msgid "Grid"
msgstr "Raster"

#: src/libslic3r/PrintConfig.cpp:845
msgid "Triangles"
msgstr "Driehoeken"

#: src/libslic3r/PrintConfig.cpp:846
msgid "Stars"
msgstr "Sterren"

#: src/libslic3r/PrintConfig.cpp:847
msgid "Cubic"
msgstr "Kubisch"

#: src/libslic3r/PrintConfig.cpp:848
msgid "Line"
msgstr "Lijnen"

#: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:2011
msgid "Honeycomb"
msgstr "Honingraat"

#: src/libslic3r/PrintConfig.cpp:851
msgid "3D Honeycomb"
msgstr "3D-honingraat"

#: src/libslic3r/PrintConfig.cpp:852
msgid "Gyroid"
msgstr "Gyroïde"

#: src/libslic3r/PrintConfig.cpp:859 src/libslic3r/PrintConfig.cpp:868
#: src/libslic3r/PrintConfig.cpp:876 src/libslic3r/PrintConfig.cpp:910
msgid "First layer"
msgstr "Eerste laag"

#: src/libslic3r/PrintConfig.cpp:860
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor de eerste laag. Als dit "
"ingesteld is op 0, wordt de standaard acceleratie gebruikt."

#: src/libslic3r/PrintConfig.cpp:869
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""
"Temperatuur van het verwarmd bed voor de eerste laag. Als dit ingesteld is "
"op 0, worden bedtemperatuur-commando's weggelaten in de output."

#: src/libslic3r/PrintConfig.cpp:878
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de eerste laag. Dit kan gebruikt worden om dikkere lagen voor een betere "
"hechting aan het bed te gebruiken. Als dit is uitgedrukt als percentage, "
"wordt dit berekend over de laagdikte van de eerste laag. Als dit is "
"ingesteld op 0, wordt de standaard extrusiebreedte gebruikt."

#: src/libslic3r/PrintConfig.cpp:891
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""
"Als geprint wordt met hele kleine laagdiktes, moet de eerste laag iets "
"dikker geprint worden voor een betere bedhechting en tolerantie voor "
"imperfecte printplatformen. Dit kan uitgedrukt worden als een absolute "
"waarde of als percentage (bijvoorbeeld 150%) over de standaard laagdikte."

#: src/libslic3r/PrintConfig.cpp:900
msgid "First layer speed"
msgstr "Snelheid eerste laag"

#: src/libslic3r/PrintConfig.cpp:901
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""
"Als dit uitgedrukt wordt als absolute waarde (in mm/s), zal deze snelheid "
"toegepast worden bij alle printbewegingen van de eerste laag, onafhankelijk "
"van het type. Als dit is uitgedrukt als percentage, wordt dit berekend over "
"de standaardsnelheid."

#: src/libslic3r/PrintConfig.cpp:911
msgid ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."
msgstr ""
"Printtemperatuur voor de eerste laag. Als dit ingesteld is op 0, worden "
"extrudertemperatuur-commando's weggelaten in de output."

#: src/libslic3r/PrintConfig.cpp:920
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""
"Printsnelheid voor het gatvullen waarbij zigzag-bewegingen worden gebruikt. "
"Houd dit laag om schudden te voorkomen (wat resulteert in "
"resonantieproblemen). Als dit is ingesteld op 0, worden gaten niet gevuld."

#: src/libslic3r/PrintConfig.cpp:928
msgid "Verbose G-code"
msgstr "Opmerkingen in G-code"

#: src/libslic3r/PrintConfig.cpp:929
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"Sta dit toe om een G-code met opmerkingen te genereren. Bij elke lijn wordt "
"een opmerking geplaatst. Als u print vanaf een SD-kaart, kan de extra "
"grootte van het bestand de firmware vertragen."

#: src/libslic3r/PrintConfig.cpp:936
msgid "G-code flavor"
msgstr "G-code-variant"

#: src/libslic3r/PrintConfig.cpp:937
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""
"Sommige G- en M-commando's zijn niet universeel. Stel deze optie in om een "
"compatibele uitvoer te krijgen voor uw printer. De 'Geen extrusie'-"
"instelling kan gebruikt worden om te printen zonder materiaal te extruderen."

#: src/libslic3r/PrintConfig.cpp:960
msgid "No extrusion"
msgstr "Geen extrusie"

#: src/libslic3r/PrintConfig.cpp:965
msgid "Label objects"
msgstr "Label objecten"

#: src/libslic3r/PrintConfig.cpp:966
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""
"Schakel dit in om opmerkingen in de G-code toe te voegen voor bewegingen die "
"behoren tot een object. Dit is handig voor de OctoPrint CancelObject-plugin. "
"Deze instelling is NIET compatibel met een multi-materialsetup met één "
"extruder en 'Afvegen in object' en 'Afvegen in vulling'."

#: src/libslic3r/PrintConfig.cpp:973
msgid "High extruder current on filament swap"
msgstr "Hoge stroomsterkte bij extruder voor filamentwissel"

#: src/libslic3r/PrintConfig.cpp:974
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"Het kan nuttig zijn om de stroomsterkte van de extrudermotor te verhogen "
"tijdens het uitvoeren van de filamentwisseling om snelle ramming mogelijk te "
"maken en om weerstand te overwinnen tijdens het laden van filament met een "
"misvormde kop."

#: src/libslic3r/PrintConfig.cpp:982
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor de vulling. Als dit is "
"ingesteld op 0, wordt de acceleratiecontrole uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:990
msgid "Combine infill every"
msgstr "Combineer vulling elke"

#: src/libslic3r/PrintConfig.cpp:992
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"Deze optie staat vullingslagen combineren toe voor een snellere print door "
"de vullingslagen stapsgewijs dikker te maken, terwijl de laagdikte van "
"perimeters behouden wordt."

#: src/libslic3r/PrintConfig.cpp:995
msgid "Combine infill every n layers"
msgstr "Combineer vulling elke n lagen"

#: src/libslic3r/PrintConfig.cpp:1001
msgid "Infill extruder"
msgstr "Vullingsextruder"

#: src/libslic3r/PrintConfig.cpp:1003
msgid "The extruder to use when printing infill."
msgstr "De extruder die gebruikt wordt voor het printen van de vulling."

#: src/libslic3r/PrintConfig.cpp:1011
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Stel dit in op een niet-nulwaarde om handmatige extrusiebreedte in te "
"stellen. Als die op 0 blijft staan, zal PrusaSlicer de breedte instellen op "
"1,125x de nozzlediameter. Mogelijk wilt u de vulling wat sneller laten "
"printen en het onderdeel sterker maken met deze optie. Als dit is uitgedrukt "
"als percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1021
msgid "Infill before perimeters"
msgstr "Vulling vóór perimeters"

#: src/libslic3r/PrintConfig.cpp:1022
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""
"Deze optie verandert de printvolgorde van perimeters en vulling; de "
"laatstgenoemde eerst."

#: src/libslic3r/PrintConfig.cpp:1027
msgid "Only infill where needed"
msgstr "Alleen vulling waar nodig"

#: src/libslic3r/PrintConfig.cpp:1029
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""
"Deze optie beperkt de vulling tot gebieden waar dit nodig is voor "
"ondersteuning van bovenvlakken (het fungeert als inwendig support). Let op: "
"deze optie vertraagt de G-code-generatie."

#: src/libslic3r/PrintConfig.cpp:1036
msgid "Infill/perimeters overlap"
msgstr "Overlapping van vulling/perimeters"

#: src/libslic3r/PrintConfig.cpp:1038
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"Deze instelling zorgt voor een extra overlapping tussen vulling en "
"perimeters voor een betere hechting. Theoretisch gezien is dit niet nodig, "
"maar terugslag kan zorgen voor gaten. Als dit is uitgedrukt als percentage, "
"wordt dit berekend over de extrusiebreedte van de perimeters."

#: src/libslic3r/PrintConfig.cpp:1049
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""
"Printsnelheid voor vulling. Als dit ingesteld is op 0, wordt de snelheid "
"automatisch berekend."

#: src/libslic3r/PrintConfig.cpp:1057
msgid "Inherits profile"
msgstr "Afgeleid profiel"

#: src/libslic3r/PrintConfig.cpp:1058
msgid "Name of the profile, from which this profile inherits."
msgstr "Profielnaam waar profiel op is gebaseerd."

#: src/libslic3r/PrintConfig.cpp:1071
msgid "Interface shells"
msgstr "Interfaceshells"

#: src/libslic3r/PrintConfig.cpp:1072
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"Forceer de generatie van dichte shells tussen aangrenzende materialen/"
"volumes. Dit is handig voor multi-extruderprints met transparante materialen "
"of handmatig oplosbaar support."

#: src/libslic3r/PrintConfig.cpp:1081
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"Deze custom code wordt ingevoegd bij elke laagwisseling, direct na de Z-"
"beweging en voor de extruder naar het volgende punt beweegt. Hier kunt u "
"variabelen gebruiken voor alle instellingen zoals 'layer_num' en 'layer_z'."

#: src/libslic3r/PrintConfig.cpp:1092
msgid "Supports remaining times"
msgstr "Ondersteunt resterende tijd"

#: src/libslic3r/PrintConfig.cpp:1093
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"Zet M73 P[geprint percentage] R[resterende tijd in minuten] na elke minuut "
"in de G-code om de firmware de exacte resterende tijd te laten weten. Vanaf "
"nu herkent de Prusa i3 MK3 de M73-commando's. Ook ondersteunt de i3 MK3 "
"firmware M73 Qxx Sxx voor de stille modus."

#: src/libslic3r/PrintConfig.cpp:1101
msgid "Supports stealth mode"
msgstr "Ondersteunt stille modus"

#: src/libslic3r/PrintConfig.cpp:1102
msgid "The firmware supports stealth mode"
msgstr "De firmware ondersteunt stille modus"

#: src/libslic3r/PrintConfig.cpp:1125
msgid "Maximum feedrate X"
msgstr "Maximale voedingssnelheid van de X-as"

#: src/libslic3r/PrintConfig.cpp:1126
msgid "Maximum feedrate Y"
msgstr "Maximale voedingssnelheid van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1127
msgid "Maximum feedrate Z"
msgstr "Maximale voedingssnelheid van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1128
msgid "Maximum feedrate E"
msgstr "Maximale extrusievoedingssnelheid"

#: src/libslic3r/PrintConfig.cpp:1131
msgid "Maximum feedrate of the X axis"
msgstr "Maximale voedingssnelheid van de X-as"

#: src/libslic3r/PrintConfig.cpp:1132
msgid "Maximum feedrate of the Y axis"
msgstr "Maximale voedingssnelheid van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1133
msgid "Maximum feedrate of the Z axis"
msgstr "Maximale voedingssnelheid van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1134
msgid "Maximum feedrate of the E axis"
msgstr "Maximale extrusievoedingssnelheid"

#: src/libslic3r/PrintConfig.cpp:1142
msgid "Maximum acceleration X"
msgstr "Maximale acceleratie X"

#: src/libslic3r/PrintConfig.cpp:1143
msgid "Maximum acceleration Y"
msgstr "Maximale acceleratie Y"

#: src/libslic3r/PrintConfig.cpp:1144
msgid "Maximum acceleration Z"
msgstr "Maximale acceleratie Z"

#: src/libslic3r/PrintConfig.cpp:1145
msgid "Maximum acceleration E"
msgstr "Maximale acceleratie E"

#: src/libslic3r/PrintConfig.cpp:1148
msgid "Maximum acceleration of the X axis"
msgstr "Maximale acceleratie van de X-as"

#: src/libslic3r/PrintConfig.cpp:1149
msgid "Maximum acceleration of the Y axis"
msgstr "Maximale acceleratie van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1150
msgid "Maximum acceleration of the Z axis"
msgstr "Maximale acceleratie van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1151
msgid "Maximum acceleration of the E axis"
msgstr "Maximale extrusie-acceleratie"

#: src/libslic3r/PrintConfig.cpp:1159
msgid "Maximum jerk X"
msgstr "Maximale ruk X"

#: src/libslic3r/PrintConfig.cpp:1160
msgid "Maximum jerk Y"
msgstr "Maximale ruk Y"

#: src/libslic3r/PrintConfig.cpp:1161
msgid "Maximum jerk Z"
msgstr "Maximale ruk Z"

#: src/libslic3r/PrintConfig.cpp:1162
msgid "Maximum jerk E"
msgstr "Maximale ruk E"

#: src/libslic3r/PrintConfig.cpp:1165
msgid "Maximum jerk of the X axis"
msgstr "Maximale ruk van de X-as"

#: src/libslic3r/PrintConfig.cpp:1166
msgid "Maximum jerk of the Y axis"
msgstr "Maximale ruk van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1167
msgid "Maximum jerk of the Z axis"
msgstr "Maximale ruk van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1168
msgid "Maximum jerk of the E axis"
msgstr "Maximale extrusie-ruk"

#: src/libslic3r/PrintConfig.cpp:1178
msgid "Minimum feedrate when extruding"
msgstr "Minimale voedingssnelheid tijdens extruderen"

#: src/libslic3r/PrintConfig.cpp:1180
msgid "Minimum feedrate when extruding (M205 S)"
msgstr "Minimale voedingssnelheid tijdens extruderen (M205 S)"

#: src/libslic3r/PrintConfig.cpp:1188
msgid "Minimum travel feedrate"
msgstr "Minimale voedingssnelheid voor bewegingen"

#: src/libslic3r/PrintConfig.cpp:1190
msgid "Minimum travel feedrate (M205 T)"
msgstr "Minimale voedingssnelheid voor bewegingen (M205 T)"

#: src/libslic3r/PrintConfig.cpp:1198
msgid "Maximum acceleration when extruding"
msgstr "Maximale acceleratie tijdens extruderen"

#: src/libslic3r/PrintConfig.cpp:1200
msgid "Maximum acceleration when extruding (M204 S)"
msgstr "Maximale acceleratie tijdens extruderen (M204 S)"

#: src/libslic3r/PrintConfig.cpp:1208
msgid "Maximum acceleration when retracting"
msgstr "Maximale acceleratie tijdens retracten"

#: src/libslic3r/PrintConfig.cpp:1210
msgid "Maximum acceleration when retracting (M204 T)"
msgstr "Maximale acceleratie tijdens retracten (M204 T)"

#: src/libslic3r/PrintConfig.cpp:1217 src/libslic3r/PrintConfig.cpp:1226
msgid "Max"
msgstr "Max"

#: src/libslic3r/PrintConfig.cpp:1218
msgid "This setting represents the maximum speed of your fan."
msgstr "Deze instelling gaat over de maximale snelheid van uw ventilator."

#: src/libslic3r/PrintConfig.cpp:1227
#, no-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"Dit is de hoogst printbare laagdikte voor deze extruder en wordt gebruikt "
"voor de variabele laagdikte en supportlaagdikte. De maximaal aanbevolen "
"laagdikte is 75% van de extrusiebreedte om nog een redelijke laaghechting te "
"krijgen. Als dit ingesteld is op 0, wordt de waarde op 75% van de "
"nozzlediameter genomen."

#: src/libslic3r/PrintConfig.cpp:1237
msgid "Max print speed"
msgstr "Maximale printsnelheid"

#: src/libslic3r/PrintConfig.cpp:1238
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"Als de alle snelheidsinstellingen op 0 staan, berekent PrusaSlicer "
"automatisch de optimale snelheid voor een constante extrusiedruk. Deze "
"experimentele instelling wordt gebruikt voor de hoogste printsnelheid die u "
"toestaat."

#: src/libslic3r/PrintConfig.cpp:1248
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""
"Deze experimentele instelling wordt gebruikt voor de maximale volumetrische "
"snelheid van de extruder."

#: src/libslic3r/PrintConfig.cpp:1257
msgid "Max volumetric slope positive"
msgstr "Maximale volumetrische stijging"

#: src/libslic3r/PrintConfig.cpp:1258 src/libslic3r/PrintConfig.cpp:1269
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""
"Deze experimentele instelling wordt gebruikt om de snelheidsveranderingen te "
"limiteren. Een waarde van 1.8mm³/s² zorgt voor een extrusieratio van 1.8mm³/"
"s (0,45mm extrusiebreedte, 0,2mm laagdikte, 20mm/s voedingssnelheid) tot "
"5.4mm³/s (60mm/s voedingssnelheid). Dit duurt ten minste 2sec."

#: src/libslic3r/PrintConfig.cpp:1262 src/libslic3r/PrintConfig.cpp:1273
msgid "mm³/s²"
msgstr "mm³/s²"

#: src/libslic3r/PrintConfig.cpp:1268
msgid "Max volumetric slope negative"
msgstr "Maximale volumetrische daling"

#: src/libslic3r/PrintConfig.cpp:1280 src/libslic3r/PrintConfig.cpp:1289
msgid "Min"
msgstr "Min"

#: src/libslic3r/PrintConfig.cpp:1281
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""
"Deze instelling geeft de minimale snelheid van uw ventilator aan waarbij de "
"ventilator draait."

#: src/libslic3r/PrintConfig.cpp:1290
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"Dit is de kleinst printbare laagdikte voor deze extruder en limiteert de "
"resolutie voor variabele laagdikte. Typische waarden zijn tussen 0,05 en 0,1 "
"mm."

#: src/libslic3r/PrintConfig.cpp:1298
msgid "Min print speed"
msgstr "Minimale printsnelheid"

#: src/libslic3r/PrintConfig.cpp:1299
msgid "Slic3r will not scale speed down below this speed."
msgstr ""
"PrusaSlicer zal de printsnelheid niet verlagen tot onder deze snelheid."

#: src/libslic3r/PrintConfig.cpp:1306
msgid "Minimal filament extrusion length"
msgstr "Minimale extrusielengte"

#: src/libslic3r/PrintConfig.cpp:1307
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"Genereer meer dan dit aantal skirtlijnen dat nodig is om de aangegeven "
"hoeveelheid filament op de eerste laag te verbruiken. Voor multi-"
"extruderprinters is dit het minimum voor elke extruder."

#: src/libslic3r/PrintConfig.cpp:1316
msgid "Configuration notes"
msgstr "Configuratie-opmerkingen"

#: src/libslic3r/PrintConfig.cpp:1317
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""
"Hier kunt u eigen opmerkingen plaatsen. Deze tekst wordt bovenin de G-code "
"toegevoegd."

#: src/libslic3r/PrintConfig.cpp:1327
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr "Dit is de diameter van uw extruder-nozzle (bijvoorbeeld 0.4)"

#: src/libslic3r/PrintConfig.cpp:1332
msgid "Host Type"
msgstr "Hosttype"

#: src/libslic3r/PrintConfig.cpp:1333
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""
"PrusaSlicer kan gcode-bestanden uploaden naar een printerhost. Dit veld moet "
"het type host bevatten."

#: src/libslic3r/PrintConfig.cpp:1348
msgid "Only retract when crossing perimeters"
msgstr "Alleen retracten bij kruisende perimeters"

#: src/libslic3r/PrintConfig.cpp:1349
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""
"Schakelt retracten uit als de bewegingsroute de perimeters van de bovenste "
"laag niet overschrijdt (en maakt eventueel druipen dus onzichtbaar)."

#: src/libslic3r/PrintConfig.cpp:1356
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""
"Deze optie verlaagt de temperatuur van de inactieve extruders om druipen te "
"voorkomen. Het staat een smalle skirt automatisch toe en beweegt extruders "
"buiten zo'n skirt als de temperatuur verandert."

#: src/libslic3r/PrintConfig.cpp:1363
msgid "Output filename format"
msgstr "Formaat van bestandsnaam"

#: src/libslic3r/PrintConfig.cpp:1364
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""
"U kunt alle instellingen gebruiken in deze template. U kunt hier ook andere "
"variabelen gebruiken, zoals 'layer_height', 'fill_density', 'timestamp', "
"'year', 'month', 'day', 'hour', 'minute', 'second', 'version', "
"'input_filename', 'input_filename_base', etc."

#: src/libslic3r/PrintConfig.cpp:1373
msgid "Detect bridging perimeters"
msgstr "Detecteer brugperimeters"

#: src/libslic3r/PrintConfig.cpp:1375
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""
"Experimentele optie om het debiet voor overhanging aan te passen. Het debiet "
"voor bruggen wordt aangehouden, evenals de printsnelheid en de koeling."

#: src/libslic3r/PrintConfig.cpp:1381
msgid "Filament parking position"
msgstr "Filament parkeerpositie"

#: src/libslic3r/PrintConfig.cpp:1382
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""
"Afstand van de nozzlepunt tot de positie waar het filament wordt geparkeerd "
"wanneer dat niet geladen is. Deze moet overeenkomen met de waarde in de "
"firmware."

#: src/libslic3r/PrintConfig.cpp:1390
msgid "Extra loading distance"
msgstr "Extra laadafstand"

#: src/libslic3r/PrintConfig.cpp:1391
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""
"Als dit ingesteld is op 0, zal de afstand die het filament tijdens het laden "
"uit de parkeerpositie even groot zijn als wanneer het filament "
"teruggetrokken wordt. Als de waarde positief is, zal het verder geladen "
"worden. Als het negatief is, is de laadafstand dus korter."

#: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1417
#: src/libslic3r/PrintConfig.cpp:1430 src/libslic3r/PrintConfig.cpp:1440
msgid "Perimeters"
msgstr "Perimeters"

#: src/libslic3r/PrintConfig.cpp:1400
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor perimeters. Als dit ingesteld "
"is op 0, worden acceleratie-instellingen voor perimeters uitgezet."

#: src/libslic3r/PrintConfig.cpp:1408
msgid "Perimeter extruder"
msgstr "Perimeterextruder"

#: src/libslic3r/PrintConfig.cpp:1410
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""
"De extruder die gebruikt wordt voor het printen van perimeters en de brim."

#: src/libslic3r/PrintConfig.cpp:1419
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de perimeters. Dit kan gebruikt worden voor nauwkeurigere details. Als dit "
"op 0 blijft staan, zal PrusaSlicer de breedte instellen op 1,125x de "
"nozzlediameter. Als dit is uitgedrukt als percentage, wordt dit berekend "
"over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1432
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""
"Printnelheid voor de perimeters (contouren, ook wel bekend als verticale "
"shells). Als dit ingesteld is op 0, wordt een automatische snelheid genomen."

#: src/libslic3r/PrintConfig.cpp:1442
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"Instelling voor het te genereren aantal perimeters per laag. PrusaSlicer kan "
"dit aantal verhogen als het schuine vlakken detecteert die gebruik maken van "
"een hoger aantal perimeters als de optie voor extra perimeters is "
"ingeschakeld."

#: src/libslic3r/PrintConfig.cpp:1446
msgid "(minimum)"
msgstr "(minimum)"

#: src/libslic3r/PrintConfig.cpp:1454
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"Als u de output-G-code via custom scripts wilt verwerken, hoeft u alleen de "
"paden hier te plaatsen. Scheid meerdere scripts met een puntkomma. Scripts "
"krijgen als eerste argument het pad naar het gcode-bestand. Ze hebben ook "
"toegang tot de configuratie-instellingen door het lezen van variabelen."

#: src/libslic3r/PrintConfig.cpp:1466
msgid "Printer type"
msgstr "Printertype"

#: src/libslic3r/PrintConfig.cpp:1467
msgid "Type of the printer."
msgstr "Type van de printer."

#: src/libslic3r/PrintConfig.cpp:1472
msgid "Printer notes"
msgstr "Printeropmerkingen"

#: src/libslic3r/PrintConfig.cpp:1473
msgid "You can put your notes regarding the printer here."
msgstr "Hier kunnen opmerkingen over de printer geplaatst worden."

#: src/libslic3r/PrintConfig.cpp:1481
msgid "Printer vendor"
msgstr "Printerleverancier"

#: src/libslic3r/PrintConfig.cpp:1482
msgid "Name of the printer vendor."
msgstr "Naam van de printerleverancier."

#: src/libslic3r/PrintConfig.cpp:1487
msgid "Printer variant"
msgstr "Printervariant"

#: src/libslic3r/PrintConfig.cpp:1488
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""
"Naam van de printervariant. De nozzlediameter kan bijvoorbeeld afwijken voor "
"verschillende varianten."

#: src/libslic3r/PrintConfig.cpp:1501
msgid "Raft layers"
msgstr "Raftlagen"

#: src/libslic3r/PrintConfig.cpp:1503
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""
"Het object wordt verhoogd met dit aantal lagen. Support wordt onder het "
"object gegenereerd."

#: src/libslic3r/PrintConfig.cpp:1511
msgid "Resolution"
msgstr "Resolutie"

#: src/libslic3r/PrintConfig.cpp:1512
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""
"Minimale resolutie van details. Dit wordt gebruikt om het geïmporteerde "
"bestand sneller te slicen, evenals de grootte van de G-code. Modellen met "
"een hoge resolutie vragen meer van een printer dan mogelijk. Als dit "
"ingesteld is op 0, wordt simplificatie uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:1522
msgid "Minimum travel after retraction"
msgstr "Minimale beweging na retracten"

#: src/libslic3r/PrintConfig.cpp:1523
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""
"Retracten is niet geactiveerd als bewegingen korter zijn dan de hier "
"ingevoerde lengte."

#: src/libslic3r/PrintConfig.cpp:1529
msgid "Retract amount before wipe"
msgstr "Retracthoeveelheid voor het afvegen"

#: src/libslic3r/PrintConfig.cpp:1530
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""
"Met Bowden-extruders is het verstandig om een aantal maal snel te retracten "
"voor het afvegen."

#: src/libslic3r/PrintConfig.cpp:1537
msgid "Retract on layer change"
msgstr "Retracten bij laagwisselingen"

#: src/libslic3r/PrintConfig.cpp:1538
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr "Dit vinkje geeft aan of wordt teruggetrokken bij een Z-beweging."

#: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551
msgid "Length"
msgstr "Lengte"

#: src/libslic3r/PrintConfig.cpp:1544
msgid "Retraction Length"
msgstr "Retractielengte"

#: src/libslic3r/PrintConfig.cpp:1545
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"Als retracten is geactiveerd, wordt filament teruggetrokken op de ingestelde "
"waarde (filamentlengte voor het de extruder in gaat)."

#: src/libslic3r/PrintConfig.cpp:1547 src/libslic3r/PrintConfig.cpp:1556
msgid "mm (zero to disable)"
msgstr "mm (stel in op 0 om uit te schakelen)"

#: src/libslic3r/PrintConfig.cpp:1552
msgid "Retraction Length (Toolchange)"
msgstr "Retractielengte (toolwissel)"

#: src/libslic3r/PrintConfig.cpp:1553
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"Als retracten is geactiveerd voor toolwisseling wordt filament "
"teruggetrokken op de ingestelde waarde (filamentlengte voor het de extruder "
"in gaat)."

#: src/libslic3r/PrintConfig.cpp:1561
msgid "Lift Z"
msgstr "Beweeg Z omhoog"

#: src/libslic3r/PrintConfig.cpp:1562
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""
"Als u dit instelt op een positieve waarde, beweegt de nozzle telkens "
"enigszins omhoog bij het retracten. Als meerdere extruders worden gebruikt, "
"wordt alleen de instelling van de eerste extruder aangehouden."

#: src/libslic3r/PrintConfig.cpp:1569
msgid "Above Z"
msgstr "Boven Z"

#: src/libslic3r/PrintConfig.cpp:1570
msgid "Only lift Z above"
msgstr "Beweeg Z alleen omhoog boven"

#: src/libslic3r/PrintConfig.cpp:1571
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"Als dit ingesteld is op een positieve waarde, zal de nozzle alleen boven de "
"ingestelde waarde omhoog bewegen voor het retracten. Deze kan aangepast "
"worden om warping te voorkomen bij de eerste lagen."

#: src/libslic3r/PrintConfig.cpp:1578
msgid "Below Z"
msgstr "Onder Z"

#: src/libslic3r/PrintConfig.cpp:1579
msgid "Only lift Z below"
msgstr "Beweeg Z alleen omhoog onder"

#: src/libslic3r/PrintConfig.cpp:1580
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"Als dit ingesteld is op een positieve waarde, zal de nozzle alleen onder de "
"ingestelde waarde omhoog bewegen bij het retracten."

#: src/libslic3r/PrintConfig.cpp:1588 src/libslic3r/PrintConfig.cpp:1596
msgid "Extra length on restart"
msgstr "Extra lengte bij een herstart"

#: src/libslic3r/PrintConfig.cpp:1589
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"Als retracten wordt gecompenseerd na een beweging, wordt deze extra "
"hoeveelheid filament geëxtrudeerd. Deze instelling is zelden van toepassing."

#: src/libslic3r/PrintConfig.cpp:1597
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""
"Als retracten wordt gecompenseerd na een toolwisseling, wordt deze extra "
"hoeveelheid filament geëxtrudeerd."

#: src/libslic3r/PrintConfig.cpp:1604 src/libslic3r/PrintConfig.cpp:1605
msgid "Retraction Speed"
msgstr "Retractiesnelheid"

#: src/libslic3r/PrintConfig.cpp:1606
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "De snelheid voor retracties (geldt alleen voor de extrudermotor)."

#: src/libslic3r/PrintConfig.cpp:1612 src/libslic3r/PrintConfig.cpp:1613
msgid "Deretraction Speed"
msgstr "Deretractiesnelheid"

#: src/libslic3r/PrintConfig.cpp:1614
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"De laadsnelheid van filament in de extruder na het retracten (geldt alleen "
"voor de extrudermotor). Als dit ingesteld is op 0, wordt de "
"retractiesnelheid gebruikt."

#: src/libslic3r/PrintConfig.cpp:1621
msgid "Seam position"
msgstr "Naadpositie"

#: src/libslic3r/PrintConfig.cpp:1623
msgid "Position of perimeters starting points."
msgstr "Startpuntpositie van perimeters."

#: src/libslic3r/PrintConfig.cpp:1629
msgid "Random"
msgstr "Willekeurig"

#: src/libslic3r/PrintConfig.cpp:1630
msgid "Nearest"
msgstr "Dichstbijzijnd"

#: src/libslic3r/PrintConfig.cpp:1631
msgid "Aligned"
msgstr "Uitgelijnd"

#: src/libslic3r/PrintConfig.cpp:1639
msgid "Direction"
msgstr "Richting"

#: src/libslic3r/PrintConfig.cpp:1641
msgid "Preferred direction of the seam"
msgstr "Richtingsvoorkeur voor de naad"

#: src/libslic3r/PrintConfig.cpp:1642
msgid "Seam preferred direction"
msgstr "Richtingsvoorkeur voor de naad"

#: src/libslic3r/PrintConfig.cpp:1649
msgid "Jitter"
msgstr "Jitter"

#: src/libslic3r/PrintConfig.cpp:1651
msgid "Seam preferred direction jitter"
msgstr "Voorkeursrichting voor de naad - jitter"

#: src/libslic3r/PrintConfig.cpp:1652
msgid "Preferred direction of the seam - jitter"
msgstr "Voorkeursrichting voor de naad - jitter"

#: src/libslic3r/PrintConfig.cpp:1662
msgid "USB/serial port for printer connection."
msgstr "USB/seriële poort voor verbinding met de printer."

#: src/libslic3r/PrintConfig.cpp:1669
msgid "Serial port speed"
msgstr "Snelheid van de seriële poort"

#: src/libslic3r/PrintConfig.cpp:1670
msgid "Speed (baud) of USB/serial port for printer connection."
msgstr ""
"Snelheid (baud) van de USB/seriële poort voor de verbinding met de printer."

#: src/libslic3r/PrintConfig.cpp:1679
msgid "Distance from object"
msgstr "Afstand vanaf het object"

#: src/libslic3r/PrintConfig.cpp:1680
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""
"Afstand tussen skirt en object. Als dit ingesteld is op 0, wordt de skirt "
"aan het object vastgemaakt; het fungeert dan als brim."

#: src/libslic3r/PrintConfig.cpp:1687
msgid "Skirt height"
msgstr "Skirthoogte"

#: src/libslic3r/PrintConfig.cpp:1688
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""
"Hoogte van de skirt uitgedrukt in het aantal lagen. Stel in op een hoge "
"waarde om te gebruiken als afscherming tegen tocht."

#: src/libslic3r/PrintConfig.cpp:1695
msgid "Loops (minimum)"
msgstr "Rondjes (minimaal)"

#: src/libslic3r/PrintConfig.cpp:1696
msgid "Skirt Loops"
msgstr "Rondjes voor de skirt"

#: src/libslic3r/PrintConfig.cpp:1697
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"Het aantal rondjes van de skirt. Als de minimale extrusielengte is ingesteld "
"kan dit aantal rondjes groter zijn dan hier is ingesteld. Als dit ingesteld "
"is op 0, wordt de skirt uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:1705
msgid "Slow down if layer print time is below"
msgstr "Vertraag bij een kortere laagprinttijd dan"

#: src/libslic3r/PrintConfig.cpp:1706
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""
"Als de laagprinttijd wordt berekend onder dit aantal seconden, wordt de "
"printsnelheid verlaagd om de laagprinttijd te verlengen."

#: src/libslic3r/PrintConfig.cpp:1715
msgid "Small perimeters"
msgstr "Smalle perimeters"

#: src/libslic3r/PrintConfig.cpp:1717
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Deze instelling heeft effect op de snelheid van perimeters met een radius "
"die kleiner of gelijk is aan 6.5mm. Als dit is uitgedrukt als percentage, "
"wordt deze genomen over de snelheid van de perimeters. Als dit ingesteld is "
"op 0, wordt een automatische snelheid genomen."

#: src/libslic3r/PrintConfig.cpp:1727
msgid "Solid infill threshold area"
msgstr "Dichte vulling bij oppervlak"

#: src/libslic3r/PrintConfig.cpp:1729
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""
"Forceer dichte vulling voor delen met een kleiner doorsnee-oppervlak dan de "
"hier ingestelde waarde."

#: src/libslic3r/PrintConfig.cpp:1730
msgid "mm²"
msgstr "mm²"

#: src/libslic3r/PrintConfig.cpp:1736
msgid "Solid infill extruder"
msgstr "Extruder voor dichte vulling"

#: src/libslic3r/PrintConfig.cpp:1738
msgid "The extruder to use when printing solid infill."
msgstr "De extruder die gebruikt wordt voor het printen van dichte vullingen."

#: src/libslic3r/PrintConfig.cpp:1744
msgid "Solid infill every"
msgstr "Dichte vulling elke"

#: src/libslic3r/PrintConfig.cpp:1746
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"Deze optie staat het genereren van een dichte laag tussen het ingestelde "
"aantal lagen toe. Stel in op 0 om dit uit te schakelen. Stel dit in op een "
"waarde; PrusaSlicer zal dan automatisch het maximaal aantal lagen kiezen om "
"te combineren op basis van de nozzlediameter en de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1758
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de vulling van dichte lagen. Als die op 0 blijft staan, zal PrusaSlicer de "
"breedte instellen op 1,125x de nozzlediameter. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1769
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""
"Printsnelheid van dichte delen. Als dit is uitgedrukt als percentage, wordt "
"dit berekend over de standaard vullingssnelheid. Als dit ingesteld is op 0, "
"worden automatische waarden genomen."

#: src/libslic3r/PrintConfig.cpp:1781
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "Aantal te genereren dichte lagen voor boven- en ondervlakken."

#: src/libslic3r/PrintConfig.cpp:1787 src/libslic3r/PrintConfig.cpp:1788
msgid "Minimum thickness of a top / bottom shell"
msgstr "Minimale dikte van top-/bodemshell"

#: src/libslic3r/PrintConfig.cpp:1794
msgid "Spiral vase"
msgstr "Spiraalmodus"

#: src/libslic3r/PrintConfig.cpp:1795
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""
"Deze optie zorgt dat de Z-as geleidelijk omhoog gaat als een object met een "
"enkele perimeter geprint wordt om een naadlijn te voorkomen. Voor deze optie "
"is een enkele perimeter nodig; vulling, bovenlagen en support zijn niet "
"mogelijk. Bodemlagen zijn wel mogelijk, evenals een skirt en brim. Dit werkt "
"niet bij het printen van meerdere objecten tegelijk."

#: src/libslic3r/PrintConfig.cpp:1803
msgid "Temperature variation"
msgstr "Temperatuurverschil"

#: src/libslic3r/PrintConfig.cpp:1804
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""
"Temperatuurverschil dat wordt toegepast als een extruder niet actief is. Dit "
"genereert een afveegblok waarop de nozzle wordt schoongeveegd."

#: src/libslic3r/PrintConfig.cpp:1814
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""
"Deze startprocedure wordt aan het begin ingevoegd, nadat het bed de gewenste "
"temperatuur heeft bereikt, de extruder is begonnen met verwarmen en de "
"extruder klaar is met verwarmen. Als PrusaSlicer M104 of M190 detecteert in "
"uw custom codes, zullen dergelijke commando's niet automatisch worden "
"voorbereid, zodat u vrij bent om de volgorde van de verwarmingscommando's en "
"andere aangepaste acties aan te passen. Merk op dat u voor alle PrusaSlicer-"
"instellingen variabelen kunt gebruiken."

#: src/libslic3r/PrintConfig.cpp:1829
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""
"Deze startprocedure wordt aan het begin ingevoegd, na een eventuele "
"printerstart G-code (en na een eventuele toolwissel op dit filament in het "
"geval van multi-materialprinters). Dit wordt gebruikt om de instellingen "
"voor een specifieke filament te overschrijven. Als PrusaSlicer M104, M109, "
"M140 of M190 detecteert in de custom codes, zullen dergelijke commando's "
"niet automatisch worden voorgeprogrammeerd, zodat u vrij bent om de volgorde "
"van de verwarmingscommando's en andere aangepaste acties aan te passen. Merk "
"op dat u variabelen kunt gebruiken voor alle PrusaSlicer-instellingen. Als u "
"meerdere extruders hebt, wordt de G-code in de volgorde van de extruders "
"verwerkt."

#: src/libslic3r/PrintConfig.cpp:1845
msgid "Single Extruder Multi Material"
msgstr "Multi-material met één extruder"

#: src/libslic3r/PrintConfig.cpp:1846
msgid "The printer multiplexes filaments into a single hot end."
msgstr "De printer mengt filament in een enkele extruder."

#: src/libslic3r/PrintConfig.cpp:1851
msgid "Prime all printing extruders"
msgstr "Veeg alle printextruders af"

#: src/libslic3r/PrintConfig.cpp:1852
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""
"Alle extruders worden afgeveegd aan de voorzijde van het printbed aan het "
"begin van de print als dit aanstaat."

#: src/libslic3r/PrintConfig.cpp:1857
msgid "No sparse layers (EXPERIMENTAL)"
msgstr "Geen smalle lagen (experimenteel)"

#: src/libslic3r/PrintConfig.cpp:1858
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""
"Het afveegblok wordt niet geprint bij lagen zonder toolwisselingen als dit "
"is ingeschakeld. Op lagen met een toolwissel zal de extruder neerwaarts "
"bewegen naar het afveegblok. De gebruiker is verantwoordelijk voor eventuele "
"botsingen met de print."

#: src/libslic3r/PrintConfig.cpp:1865
msgid "Generate support material"
msgstr "Genereer support"

#: src/libslic3r/PrintConfig.cpp:1867
msgid "Enable support material generation."
msgstr "Sta de generatie van support toe."

#: src/libslic3r/PrintConfig.cpp:1871
msgid "Auto generated supports"
msgstr "Automatisch gegenereerd support"

#: src/libslic3r/PrintConfig.cpp:1873
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"Support wordt automatisch gegenereerd als dit aan staat. Als dit niet "
"aanstaat zal support alleen bij supportforceringen gegenereerd worden."

#: src/libslic3r/PrintConfig.cpp:1879
msgid "XY separation between an object and its support"
msgstr "Horizontale ruimte tussen het object en het support"

#: src/libslic3r/PrintConfig.cpp:1881
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"Horizontale ruimte tussen object en support. Als dit is uitgedrukt als "
"percentage, wordt deze berekend over de breedte van de buitenste perimeter."

#: src/libslic3r/PrintConfig.cpp:1891
msgid "Pattern angle"
msgstr "Patroonhoek"

#: src/libslic3r/PrintConfig.cpp:1893
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr "Gebruik deze instelling om het patroon van het support te draaien."

#: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:2676
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""
"Genereer alleen support als dit op het bed geplaatst wordt, dus niet op de "
"print zelf."

#: src/libslic3r/PrintConfig.cpp:1909
msgid "Contact Z distance"
msgstr "Contact Z-afstand"

#: src/libslic3r/PrintConfig.cpp:1911
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""
"De afstand tussen objecten en het support. Stel in op 0 om te voorkomen dat "
"PrusaSlicer bruginstellingen gebruikt voor de eerste laag boven het "
"supportdak."

#: src/libslic3r/PrintConfig.cpp:1918
msgid "0 (soluble)"
msgstr "0 (oplosbaar)"

#: src/libslic3r/PrintConfig.cpp:1919
msgid "0.2 (detachable)"
msgstr "0.2 (losbreekbaar)"

#: src/libslic3r/PrintConfig.cpp:1924
msgid "Enforce support for the first"
msgstr "Forceer support voor de eerste"

#: src/libslic3r/PrintConfig.cpp:1926
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"Genereer support voor het ingevoerd aantal lagen, tellend vanaf de bodem, "
"ongeacht de plekken waar standaard support al dan niet is toegestaan, "
"waarbij de ingesteld hoek wordt aangehouden. Dit is handig om meer hechting "
"op het bed te verkrijgen bij objecten met een klein contactoppervlak."

#: src/libslic3r/PrintConfig.cpp:1931
msgid "Enforce support for the first n layers"
msgstr "Forceer support voor de eerste n lagen"

#: src/libslic3r/PrintConfig.cpp:1937
msgid "Support material/raft/skirt extruder"
msgstr "Extruder voor support/raft/skirt"

#: src/libslic3r/PrintConfig.cpp:1939
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"De extruder die gebruikt wordt voor support, raft en skirt (stel in op 1 of "
"op 0 om de huidige extruder te gebruiken)."

#: src/libslic3r/PrintConfig.cpp:1948
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"het support. Als die op 0 blijft staan, zal PrusaSlicer de breedte instellen "
"zelf bepalen op basis van de nozzlediameter. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1957
msgid "Interface loops"
msgstr "Interface rondjes"

#: src/libslic3r/PrintConfig.cpp:1959
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""
"Bedek de bovenste interfacelagen van het support met rondjes. Dit staat "
"standaard uit."

#: src/libslic3r/PrintConfig.cpp:1964
msgid "Support material/raft interface extruder"
msgstr "Extruder voor supportdak en de bovenlaag van de raft"

#: src/libslic3r/PrintConfig.cpp:1966
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"De extruder die gebruikt wordt voor de supportinterface (stel in op hoger "
"dan 1 of op 0 om de huidige extruder te gebruiken voor minder "
"toolwisselingen). Dit heeft ook effect op de raft."

#: src/libslic3r/PrintConfig.cpp:1973
msgid "Interface layers"
msgstr "Supportinterface-lagen"

#: src/libslic3r/PrintConfig.cpp:1975
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr "Aantal interface-lagen tussen het support en het object."

#: src/libslic3r/PrintConfig.cpp:1982
msgid "Interface pattern spacing"
msgstr "Tussenafstand voor interface"

#: src/libslic3r/PrintConfig.cpp:1984
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""
"Ruimte tussen lijnen van supportinterface. Als dit ingesteld is op 0, wordt "
"een dichte supportinterface gegenereerd."

#: src/libslic3r/PrintConfig.cpp:1993
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"Printsnelheid van supportinterface-lagen. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de snelheid van het support."

#: src/libslic3r/PrintConfig.cpp:2002
msgid "Pattern"
msgstr "Patroon"

#: src/libslic3r/PrintConfig.cpp:2004
msgid "Pattern used to generate support material."
msgstr "Patroon dat gebruikt wordt voor het support."

#: src/libslic3r/PrintConfig.cpp:2010
msgid "Rectilinear grid"
msgstr "Rechtlijnig raster"

#: src/libslic3r/PrintConfig.cpp:2016
msgid "Pattern spacing"
msgstr "Tussenafstand van het patroon"

#: src/libslic3r/PrintConfig.cpp:2018
msgid "Spacing between support material lines."
msgstr "Afstand tussen supportlijnen."

#: src/libslic3r/PrintConfig.cpp:2027
msgid "Speed for printing support material."
msgstr "Printsnelheid voor support."

#: src/libslic3r/PrintConfig.cpp:2034
msgid "Synchronize with object layers"
msgstr "Synchroniseer met objectlagen"

#: src/libslic3r/PrintConfig.cpp:2036
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""
"Synchroniseer de supportlagen met de objectlagen. Dit is handig voor multi-"
"materialprinters waar een toolwissel duur is."

#: src/libslic3r/PrintConfig.cpp:2042
msgid "Overhang threshold"
msgstr "Maximale overhanghoek"

#: src/libslic3r/PrintConfig.cpp:2044
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"Support wordt niet gegenereerd als de overhanghoek boven de gegeven waarde "
"ligt. In andere woorden; deze waarde geeft de hoek met het bed aan die "
"geprint moet worden met support. Als dit ingesteld is op 0, wordt dit "
"automatisch gedetecteerd (aanbevolen)."

#: src/libslic3r/PrintConfig.cpp:2056
msgid "With sheath around the support"
msgstr "Met schild rond het support"

#: src/libslic3r/PrintConfig.cpp:2058
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"Voeg een schild (één perimeterlijn) rondom het support toe. Dit maakt het "
"support betrouwbaarder maar ook moeilijker te verwijderen."

#: src/libslic3r/PrintConfig.cpp:2065
msgid ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."
msgstr ""
"Extrudertemperatuur voor lager direct na de eerste laag. Als dit ingesteld "
"is op 0, voorkomt dit een verschil in de output."

#: src/libslic3r/PrintConfig.cpp:2073
msgid "Detect thin walls"
msgstr "Detecteer dunne wanden"

#: src/libslic3r/PrintConfig.cpp:2075
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""
"Detecteer éénlijnige wanden (delen waar 2 extrusielijnen niet passen en dit "
"geprint moet worden met 1 lijn)."

#: src/libslic3r/PrintConfig.cpp:2081
msgid "Threads"
msgstr "Meerdere processen"

#: src/libslic3r/PrintConfig.cpp:2082
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""
"Meerdere processen worden gebruikt om langdurige commando's parallel te "
"draaien. Het optimaal aantal processen is vlak boven het aanwezige aantal "
"kernen/processoren."

#: src/libslic3r/PrintConfig.cpp:2094
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {previous_extruder} and "
"{next_extruder} can be used. When a tool-changing command which changes to "
"the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""
"Deze custom code wordt ingevoegd voor elke toolwissel. Zowel variabelen van "
"alle PrusaSlicer-instellingen als 'previous_extruder' en 'next_extruder' "
"kunnen gebruikt worden. Als een toolwissel-commando (bijvoorbeeld "
"'T[next_extruder]') is ingevoegd, zal PrusaSlicer niet nog een dergelijk "
"commando invoegen. Het is daarom mogelijk om voor én na de toolwissel een "
"custom script te draaien."

#: src/libslic3r/PrintConfig.cpp:2107
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de vulling van bovenvlakken. Dit kan gebruikt worden voor een dunner "
"extrudaat in smalle gebieden voor een gladdere afwerking. Als dit is "
"uitgedrukt als percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:2119
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"Printsnelheid voor dichte toplagen (alleen de buitenste zichtbare laag). Als "
"deze waarde lager wordt gezet, resulteert dit in een gladder oppervlak. Als "
"dit is uitgedrukt als percentage, wordt dit berekend over de "
"vullingssnelheid. Als dit ingesteld is op 0, wordt een automatische snelheid "
"genomen."

#: src/libslic3r/PrintConfig.cpp:2134
msgid "Number of solid layers to generate on top surfaces."
msgstr "Aantal te genereren dichte lagen voor bovenvlakken."

#: src/libslic3r/PrintConfig.cpp:2135
msgid "Top solid layers"
msgstr "Bovenste dichte vulling"

#: src/libslic3r/PrintConfig.cpp:2143
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""
"Het aantal dichte bovenlagen wordt verhoogd als blijkt dat dit nodig is om "
"de minimale shelldikte te garanderen. Dit is handig om kussenvorming te "
"voorkomen bij het printen met variabele laagdikte."

#: src/libslic3r/PrintConfig.cpp:2146
msgid "Minimum top shell thickness"
msgstr "Minimale shelldikte aan de bovenzijde"

#: src/libslic3r/PrintConfig.cpp:2153
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "Bewegingssnelheid als niet geëxtrudeerd wordt."

#: src/libslic3r/PrintConfig.cpp:2161
msgid "Use firmware retraction"
msgstr "Gebruik de firmware-retractie"

#: src/libslic3r/PrintConfig.cpp:2162
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""
"Deze experimentele instelling gebruikt G10 en G11 commando's voor het "
"retracten in de firmware. Dit wordt alleen ondersteunt bij de recente Marlin-"
"variant."

#: src/libslic3r/PrintConfig.cpp:2168
msgid "Use relative E distances"
msgstr "Gebruik relatieve E-waarden"

#: src/libslic3r/PrintConfig.cpp:2169
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""
"Als uw firmware relatieve extrusiewaarden nodig heeft, vink dit dan aan. "
"Laat het ander uit staan. De meeste firmware gebruiken absolute waarden."

#: src/libslic3r/PrintConfig.cpp:2175
msgid "Use volumetric E"
msgstr "Gebruik volumetrische E-waarden"

#: src/libslic3r/PrintConfig.cpp:2176
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"Deze experimentele instelling gebruikt E-waarden in kubieke millimeters in "
"plaats van lineaire millimeters. Als uw firmware nog niet weet wat de "
"filamentdiameter is, kunt u een commando zoals 'M200 D[filament_diameter_0] "
"T0' in de start G-code invoegen om de volumetrische modus te gebruiken. Deze "
"variabele gebruikt de filamentdiameter zoals ingevoerd bij de "
"filamentinstellingen. Dit wordt alleen ondersteund in de recente Marlin-"
"variant."

#: src/libslic3r/PrintConfig.cpp:2186
msgid "Enable variable layer height feature"
msgstr "Sta variabele laagdikte toe"

#: src/libslic3r/PrintConfig.cpp:2187
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""
"Sommige printers of printersetups kunnen niet printen met een variabele "
"laagdikte. Staat standaard aan."

#: src/libslic3r/PrintConfig.cpp:2193
msgid "Wipe while retracting"
msgstr "Veeg af bij het retracten"

#: src/libslic3r/PrintConfig.cpp:2194
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""
"Als u dit aanvinkt beweegt de nozzle tijdens het retracten om een blob of "
"lekkende extruders tegen te gaan."

#: src/libslic3r/PrintConfig.cpp:2201
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"Multi-materialprinters moeten afvegen bij toolwisselingen. Extrudeer het "
"overtollige materiaal op het afveegblok."

#: src/libslic3r/PrintConfig.cpp:2207
msgid "Purging volumes - load/unload volumes"
msgstr "Afveegvolume - laad/ontlaad volumes"

#: src/libslic3r/PrintConfig.cpp:2208
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""
"Deze vector bespaart de benodigde volumes om van/naar elke extruder dat op "
"het afveegblok wordt gebruikt te wisselen. Deze waarden worden gebruikt om "
"het creëren van de onderstaande volledige reinigingsvolumes te "
"vereenvoudigen."

#: src/libslic3r/PrintConfig.cpp:2214
msgid "Purging volumes - matrix"
msgstr "Afveegvolume - matrix"

#: src/libslic3r/PrintConfig.cpp:2215
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""
"Deze matrix beschrijft volume (in mm³) dat is vereist om nieuw filament af "
"te vegen aan het afveegblok voor elk paar van extruders."

#: src/libslic3r/PrintConfig.cpp:2224
msgid "Position X"
msgstr "X-positie"

#: src/libslic3r/PrintConfig.cpp:2225
msgid "X coordinate of the left front corner of a wipe tower"
msgstr "X-coördinaat van de linkervoorhoek van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:2231
msgid "Position Y"
msgstr "Y-positie"

#: src/libslic3r/PrintConfig.cpp:2232
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr "Y-coördinaat van de linkervoorhoek van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:2239
msgid "Width of a wipe tower"
msgstr "Breedte van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:2245
msgid "Wipe tower rotation angle"
msgstr "Rotatie van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:2246
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr "Rotatie van het afveegblok ten opzichte van de X-as."

#: src/libslic3r/PrintConfig.cpp:2253
msgid "Wipe into this object's infill"
msgstr "Afvegen in de vulling van het object"

#: src/libslic3r/PrintConfig.cpp:2254
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""
"Het afvegen na de toolwissel wordt gedaan in de vulling van het object. Dit "
"reduceert de hoeveelheid afval, maar kan leiden tot een langere printtijd."

#: src/libslic3r/PrintConfig.cpp:2261
msgid "Wipe into this object"
msgstr "Afvegen in dit object"

#: src/libslic3r/PrintConfig.cpp:2262
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"Het object wordt gebruikt om de nozzle af te vegen bij een toolwissel om "
"materiaal dat anders in het afveegblok gebruikt wordt te besparen. Kleuren "
"kunnen dan gemengd worden."

#: src/libslic3r/PrintConfig.cpp:2268
msgid "Maximal bridging distance"
msgstr "Maximale brugafstand"

#: src/libslic3r/PrintConfig.cpp:2269
msgid "Maximal distance between supports on sparse infill sections."
msgstr "Maximale afstand tussen support op dunne vullingsdelen."

#: src/libslic3r/PrintConfig.cpp:2275
msgid "XY Size Compensation"
msgstr "Compensatie voor X- en Y-grootte"

#: src/libslic3r/PrintConfig.cpp:2277
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""
"Het object wordt in horizontale richting verbreed/versmald in de ingestelde "
"waarde (negatief = naar binnen, positief = naar buiten). Dit kan handig zijn "
"voor het verfijnen van gaten."

#: src/libslic3r/PrintConfig.cpp:2285
msgid "Z offset"
msgstr "Z-hoogte"

#: src/libslic3r/PrintConfig.cpp:2286
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"Deze waarde wordt toegevoegd (of afgetrokken) van alle Z-coördinaten in de G-"
"code. Het wordt gebruikt voor een slechte Z-eindstop positie. Als de Z-"
"eindstop bijvoorbeeld een waarde gebruikt die 0.3mm van het printbed is, kan "
"dit ingesteld worden op -0.3mm."

#: src/libslic3r/PrintConfig.cpp:2353
msgid "Display width"
msgstr "Schermbreedte"

#: src/libslic3r/PrintConfig.cpp:2354
msgid "Width of the display"
msgstr "Breedte van het scherm"

#: src/libslic3r/PrintConfig.cpp:2359
msgid "Display height"
msgstr "Schermhoogte"

#: src/libslic3r/PrintConfig.cpp:2360
msgid "Height of the display"
msgstr "Hoogte van het scherm"

#: src/libslic3r/PrintConfig.cpp:2365
msgid "Number of pixels in"
msgstr "Aantal pixels"

#: src/libslic3r/PrintConfig.cpp:2367
msgid "Number of pixels in X"
msgstr "Aantal pixels in de breedte"

#: src/libslic3r/PrintConfig.cpp:2373
msgid "Number of pixels in Y"
msgstr "Aantal pixels in de hoogte"

#: src/libslic3r/PrintConfig.cpp:2378
msgid "Display horizontal mirroring"
msgstr "Scherm horizontaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2379
msgid "Mirror horizontally"
msgstr "Spiegel horizontaal"

#: src/libslic3r/PrintConfig.cpp:2380
msgid "Enable horizontal mirroring of output images"
msgstr "Horizontaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2385
msgid "Display vertical mirroring"
msgstr "Scherm verticaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2386
msgid "Mirror vertically"
msgstr "Verticaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2387
msgid "Enable vertical mirroring of output images"
msgstr "Verticaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2392
msgid "Display orientation"
msgstr "Schermoriëntatie"

#: src/libslic3r/PrintConfig.cpp:2393
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"Stel de werkelijke oriëntatie van het LCD-scherm van de SLA-printer in. "
"Staande modus zal de breedte- en hoogteparameters omwisselen en de output "
"wordt 90 graden gedraaid."

#: src/libslic3r/PrintConfig.cpp:2399
msgid "Landscape"
msgstr "Liggend"

#: src/libslic3r/PrintConfig.cpp:2400
msgid "Portrait"
msgstr "Staand"

#: src/libslic3r/PrintConfig.cpp:2405
msgid "Fast"
msgstr "Snel"

#: src/libslic3r/PrintConfig.cpp:2406
msgid "Fast tilt"
msgstr "Snelle kanteling"

#: src/libslic3r/PrintConfig.cpp:2407
msgid "Time of the fast tilt"
msgstr "Tijd van de snelle kanteling"

#: src/libslic3r/PrintConfig.cpp:2414
msgid "Slow"
msgstr "Langzaam"

#: src/libslic3r/PrintConfig.cpp:2415
msgid "Slow tilt"
msgstr "Langzaam kantelen"

#: src/libslic3r/PrintConfig.cpp:2416
msgid "Time of the slow tilt"
msgstr "Tijd van de langzame kanteling"

#: src/libslic3r/PrintConfig.cpp:2423
msgid "Area fill"
msgstr "Vulgebied"

#: src/libslic3r/PrintConfig.cpp:2424
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""
"Percentage van het printbed. \n"
"Als het printgebied buiten een specifieke waarde valt \n"
"wordt een korte kanteling gebruikt, anders een snelle kanteling"

#: src/libslic3r/PrintConfig.cpp:2431 src/libslic3r/PrintConfig.cpp:2432
#: src/libslic3r/PrintConfig.cpp:2433
msgid "Printer scaling correction"
msgstr "Verschalingscorrectie voor printer"

#: src/libslic3r/PrintConfig.cpp:2439 src/libslic3r/PrintConfig.cpp:2440
msgid "Printer absolute correction"
msgstr "Absolute correctie voor printer"

#: src/libslic3r/PrintConfig.cpp:2441
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""
"Zal de geslicede veelhoeken uitrekken of laten krimpen, afhankelijk van de "
"correctiewaarde."

#: src/libslic3r/PrintConfig.cpp:2447
msgid "Elephant foot minimum width"
msgstr "Squishcompensatiebreedte"

#: src/libslic3r/PrintConfig.cpp:2449
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr "Minimale breedte van delen waarop squishcompensatie wordt toegepast."

#: src/libslic3r/PrintConfig.cpp:2456 src/libslic3r/PrintConfig.cpp:2457
msgid "Printer gamma correction"
msgstr "Gammacorrectie voor printer"

#: src/libslic3r/PrintConfig.cpp:2458
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""
"Dit zorgt voor een gammacorrectie voor de veelhoeken. Een gammawaarde van 0 "
"betekent een waarde die in het midden ligt. Dit gedrag elimineert anti-"
"aliasing zonder dat gaten in de veelhoeken verloren gaan."

#: src/libslic3r/PrintConfig.cpp:2470 src/libslic3r/PrintConfig.cpp:2471
msgid "SLA material type"
msgstr "SLA-materiaaltype"

#: src/libslic3r/PrintConfig.cpp:2482 src/libslic3r/PrintConfig.cpp:2483
msgid "Initial layer height"
msgstr "Laagdikte eerste laag"

#: src/libslic3r/PrintConfig.cpp:2489 src/libslic3r/PrintConfig.cpp:2490
msgid "Bottle volume"
msgstr "Flesinhoud (volume)"

#: src/libslic3r/PrintConfig.cpp:2491
msgid "ml"
msgstr "ml"

#: src/libslic3r/PrintConfig.cpp:2496 src/libslic3r/PrintConfig.cpp:2497
msgid "Bottle weight"
msgstr "Flesinhoud (gewicht)"

#: src/libslic3r/PrintConfig.cpp:2498
msgid "kg"
msgstr "kg"

#: src/libslic3r/PrintConfig.cpp:2505
msgid "g/ml"
msgstr "g/ml"

#: src/libslic3r/PrintConfig.cpp:2512
msgid "money/bottle"
msgstr "€/fles"

#: src/libslic3r/PrintConfig.cpp:2517
msgid "Faded layers"
msgstr "Transitielagen"

#: src/libslic3r/PrintConfig.cpp:2518
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""
"Aantal lagen waarin de initiële belichtingstijd stapsgewijs wordt "
"teruggebracht naar de standaard belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2526
msgid "Minimum exposure time"
msgstr "Minimale belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2533 src/libslic3r/PrintConfig.cpp:2534
msgid "Maximum exposure time"
msgstr "Maximale belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2541 src/libslic3r/PrintConfig.cpp:2542
msgid "Exposure time"
msgstr "Belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2548 src/libslic3r/PrintConfig.cpp:2549
msgid "Minimum initial exposure time"
msgstr "Minimale initiële belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2556 src/libslic3r/PrintConfig.cpp:2557
msgid "Maximum initial exposure time"
msgstr "Maximale initiële belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2564 src/libslic3r/PrintConfig.cpp:2565
msgid "Initial exposure time"
msgstr "Initiële belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2571 src/libslic3r/PrintConfig.cpp:2572
msgid "Correction for expansion"
msgstr "Vergrotingscorrectie"

#: src/libslic3r/PrintConfig.cpp:2578
msgid "SLA print material notes"
msgstr "SLA-printmateriaal opmerkingen"

#: src/libslic3r/PrintConfig.cpp:2579
msgid "You can put your notes regarding the SLA print material here."
msgstr "U kunt hier opmerkingen plaatsen wat betreft het SLA-materiaal."

#: src/libslic3r/PrintConfig.cpp:2591 src/libslic3r/PrintConfig.cpp:2602
msgid "Default SLA material profile"
msgstr "Standaard SLA-materiaalprofiel"

#: src/libslic3r/PrintConfig.cpp:2613
msgid "Generate supports"
msgstr "Genereer support"

#: src/libslic3r/PrintConfig.cpp:2615
msgid "Generate supports for the models"
msgstr "Genereer support voor de modellen"

#: src/libslic3r/PrintConfig.cpp:2620
msgid "Support head front diameter"
msgstr "Supportkopdiameter"

#: src/libslic3r/PrintConfig.cpp:2622
msgid "Diameter of the pointing side of the head"
msgstr "Diameter van de puntige zijde van de kop"

#: src/libslic3r/PrintConfig.cpp:2629
msgid "Support head penetration"
msgstr "Supportkopinsteek"

#: src/libslic3r/PrintConfig.cpp:2631
msgid "How much the pinhead has to penetrate the model surface"
msgstr "Hoe ver de supportkop in het model moet steken"

#: src/libslic3r/PrintConfig.cpp:2638
msgid "Support head width"
msgstr "Supportkopbreedte"

#: src/libslic3r/PrintConfig.cpp:2640
msgid "Width from the back sphere center to the front sphere center"
msgstr "Centerafstand van de achterste tot de voorste bol"

#: src/libslic3r/PrintConfig.cpp:2648
msgid "Support pillar diameter"
msgstr "Supportpijler - diameter"

#: src/libslic3r/PrintConfig.cpp:2650
msgid "Diameter in mm of the support pillars"
msgstr "Diameter van de supportpijlers (in mm)"

#: src/libslic3r/PrintConfig.cpp:2658
msgid "Support pillar connection mode"
msgstr "Supportpijler - verbindingsmodus"

#: src/libslic3r/PrintConfig.cpp:2659
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""
"Geeft het type brug tussen twee aangrenzende pijlers aan. Dit kan zigzag, "
"kruisend (dubbele zigzag) of dynamisch zijn. Dynamisch houdt in dat wordt "
"geschakeld tussen de eerste twee, afhankelijk van de pijlerafstand."

#: src/libslic3r/PrintConfig.cpp:2667
msgid "Zig-Zag"
msgstr "Zigzag"

#: src/libslic3r/PrintConfig.cpp:2668
msgid "Cross"
msgstr "Kruisend"

#: src/libslic3r/PrintConfig.cpp:2669
msgid "Dynamic"
msgstr "Dynamisch"

#: src/libslic3r/PrintConfig.cpp:2681
msgid "Pillar widening factor"
msgstr "Pijlervergrotingsfactor"

#: src/libslic3r/PrintConfig.cpp:2683
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""
"Bruggen of pijlers samenvoegen met andere pijlers kan de radius vergroten. 0 "
"betekent geen vergroting, 1 betekent volle vergroting."

#: src/libslic3r/PrintConfig.cpp:2692
msgid "Support base diameter"
msgstr "Supportbasis - diameter"

#: src/libslic3r/PrintConfig.cpp:2694
msgid "Diameter in mm of the pillar base"
msgstr "Diameter van de pijlerbasis (in mm)"

#: src/libslic3r/PrintConfig.cpp:2702
msgid "Support base height"
msgstr "Supportbasis - hoogte"

#: src/libslic3r/PrintConfig.cpp:2704
msgid "The height of the pillar base cone"
msgstr "Hoogte van de pijlerbasiskegel"

#: src/libslic3r/PrintConfig.cpp:2711
msgid "Support base safety distance"
msgstr "Supportbasis - veilige afstand"

#: src/libslic3r/PrintConfig.cpp:2714
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""
"Minimale afstand tussen pijlerbasis en model (in mm). Dit is handig bij de "
"modus zonder verhoging waar een gat volgens deze parameter wordt ingevoegd "
"tussen het model en de basisplaat."

#: src/libslic3r/PrintConfig.cpp:2724
msgid "Critical angle"
msgstr "Kritische hoek"

#: src/libslic3r/PrintConfig.cpp:2726
msgid "The default angle for connecting support sticks and junctions."
msgstr "De standaardhoek voor de verbinding van supporttakken en kruisingen."

#: src/libslic3r/PrintConfig.cpp:2734
msgid "Max bridge length"
msgstr "Maximale bruglengte"

#: src/libslic3r/PrintConfig.cpp:2736
msgid "The max length of a bridge"
msgstr "Maximale bruglengte"

#: src/libslic3r/PrintConfig.cpp:2743
msgid "Max pillar linking distance"
msgstr "Maximale pijler-verbindafstand"

#: src/libslic3r/PrintConfig.cpp:2745
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""
"Maximale verbindingsafstand van twee pijlers. Een waarde van 0 schakelt aan "
"elkaar verbonden pijlers uit."

#: src/libslic3r/PrintConfig.cpp:2753
msgid "Object elevation"
msgstr "Objectverhoging"

#: src/libslic3r/PrintConfig.cpp:2755
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""
"Hoe veel het support omhoog moet bewegen op het ondersteunde object. Als "
"'Basisplaat rondom object' is ingeschakeld wordt deze waarde genegeerd."

#: src/libslic3r/PrintConfig.cpp:2766
msgid "This is a relative measure of support points density."
msgstr "Relatieve waarde van de dichtheid van supportpunten."

#: src/libslic3r/PrintConfig.cpp:2772
msgid "Minimal distance of the support points"
msgstr "Minimale supportpuntafstand"

#: src/libslic3r/PrintConfig.cpp:2774
msgid "No support points will be placed closer than this threshold."
msgstr "Minimale afstand tussen supportpunten."

#: src/libslic3r/PrintConfig.cpp:2780
msgid "Use pad"
msgstr "Gebruik basisplaat"

#: src/libslic3r/PrintConfig.cpp:2782
msgid "Add a pad underneath the supported model"
msgstr "Voeg een basisplaat toe onder het model met support"

#: src/libslic3r/PrintConfig.cpp:2787
msgid "Pad wall thickness"
msgstr "Basisplaat - wanddikte"

#: src/libslic3r/PrintConfig.cpp:2789
msgid "The thickness of the pad and its optional cavity walls."
msgstr "Dikte van de basisplaat en optionele wanden."

#: src/libslic3r/PrintConfig.cpp:2797
msgid "Pad wall height"
msgstr "Basisplaat - wandhoogte"

#: src/libslic3r/PrintConfig.cpp:2798
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""
"Geeft de basisplaat-wandhoogte aan. Als dit ingesteld is op 0, wordt dit "
"uitgeschakeld. Wees voorzichtig met het aanzetten van deze optie, omdat "
"sommige resins een sterk zuigeffect in de holte produceren, wat het afpellen "
"van de print van het folie lastig kan maken."

#: src/libslic3r/PrintConfig.cpp:2811
msgid "Pad brim size"
msgstr "Basisplaat - expansie"

#: src/libslic3r/PrintConfig.cpp:2812
msgid "How far should the pad extend around the contained geometry"
msgstr "Hoe ver de basisplaat moet uitsteken buiten de geometrie"

#: src/libslic3r/PrintConfig.cpp:2822
msgid "Max merge distance"
msgstr "Maximale combineerafstand"

#: src/libslic3r/PrintConfig.cpp:2824
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"Sommige objecten werken beter met een aantal kleinere basisplaten in plaats "
"van één grote. Deze parameter bepaalt hoe ver de tussenafstand van de "
"kleinere basisplaten mogen zijn."

#: src/libslic3r/PrintConfig.cpp:2844
msgid "Pad wall slope"
msgstr "Basisplaat - zijhoek"

#: src/libslic3r/PrintConfig.cpp:2846
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""
"Hoek van de basisplaatzijde ten opzichte van het bed. 90 graden betekent een "
"rechte zijkant."

#: src/libslic3r/PrintConfig.cpp:2855
msgid "Pad around object"
msgstr "Basisplaat rondom object"

#: src/libslic3r/PrintConfig.cpp:2857
msgid "Create pad around object and ignore the support elevation"
msgstr "Genereer basisplaat rondom object en schakel objectverhoging uit"

#: src/libslic3r/PrintConfig.cpp:2862
msgid "Pad around object everywhere"
msgstr "Overal basisplaat rondom object"

#: src/libslic3r/PrintConfig.cpp:2864
msgid "Force pad around object everywhere"
msgstr "Forceer basisplaat overal rondom het object"

#: src/libslic3r/PrintConfig.cpp:2869
msgid "Pad object gap"
msgstr "Basisplaat - gat"

#: src/libslic3r/PrintConfig.cpp:2871
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""
"Het gat tussen de onderkant van het object en de gegenereerde basisplaat in "
"de modus zonder verhoging."

#: src/libslic3r/PrintConfig.cpp:2880
msgid "Pad object connector stride"
msgstr "Basisplaat - verbindingstakafstand"

#: src/libslic3r/PrintConfig.cpp:2882
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""
"Afstand tussen twee verbindingstakken die het object verbinden aan de "
"basisplaat."

#: src/libslic3r/PrintConfig.cpp:2889
msgid "Pad object connector width"
msgstr "Basisplaat - verbindingstakbreedte"

#: src/libslic3r/PrintConfig.cpp:2891
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""
"Breedte van de verbindingstakken die het object en de basisplaat met elkaar "
"verbinden."

#: src/libslic3r/PrintConfig.cpp:2898
msgid "Pad object connector penetration"
msgstr "Basisplaat - Verbindingstakinsteek"

#: src/libslic3r/PrintConfig.cpp:2901
msgid "How much should the tiny connectors penetrate into the model body."
msgstr "Hoe ver de verbindingstakken in het model steken."

#: src/libslic3r/PrintConfig.cpp:2908
msgid "Enable hollowing"
msgstr "Uithollen toestaan"

#: src/libslic3r/PrintConfig.cpp:2910
msgid "Hollow out a model to have an empty interior"
msgstr "Hol een model uit voor een leeg binnenste"

#: src/libslic3r/PrintConfig.cpp:2915
msgid "Wall thickness"
msgstr "Wanddikte"

#: src/libslic3r/PrintConfig.cpp:2917
msgid "Minimum wall thickness of a hollowed model."
msgstr "Minimale wanddikte van een uitgehold model."

#: src/libslic3r/PrintConfig.cpp:2925
msgid "Accuracy"
msgstr "Nauwkeurigheid"

#: src/libslic3r/PrintConfig.cpp:2927
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""
"Prestatie tegenover nauwkeurigheid van berekenen. Lagere waarde kunnen "
"ongewenste artefacten produceren."

#: src/libslic3r/PrintConfig.cpp:2937
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""
"Uithollen voltooid in twee stappen: eerst is een denkbeeldig binnenste in "
"het model berekend (wanddikte + sluitafstand). Daarna is het opgeblazen, "
"terug naar de aangegeven wanddikte. Een grotere sluitafstand maakt het "
"binnenste ronder. Bij een waarde van 0 is het binnenste vrijwel gelijk aan "
"de buitenzijde."

#: src/libslic3r/PrintConfig.cpp:3320
msgid "Export OBJ"
msgstr "Exporteer OBJ"

#: src/libslic3r/PrintConfig.cpp:3321
msgid "Export the model(s) as OBJ."
msgstr "Exporteer de modellen als OBJ-bestand."

#: src/libslic3r/PrintConfig.cpp:3332
msgid "Export SLA"
msgstr "Exporteer SLA"

#: src/libslic3r/PrintConfig.cpp:3333
msgid "Slice the model and export SLA printing layers as PNG."
msgstr "Slice het model en exporteer SLA-printlagen als PNG-bestanden."

#: src/libslic3r/PrintConfig.cpp:3338
msgid "Export 3MF"
msgstr "Exporteer 3MF"

#: src/libslic3r/PrintConfig.cpp:3339
msgid "Export the model(s) as 3MF."
msgstr "Exporteer de modellen als 3MF-bestanden."

#: src/libslic3r/PrintConfig.cpp:3343
msgid "Export AMF"
msgstr "Exporteer AMF"

#: src/libslic3r/PrintConfig.cpp:3344
msgid "Export the model(s) as AMF."
msgstr "Exporteer de modellen als AMF-bestanden."

#: src/libslic3r/PrintConfig.cpp:3348
msgid "Export STL"
msgstr "Exporteer STL"

#: src/libslic3r/PrintConfig.cpp:3349
msgid "Export the model(s) as STL."
msgstr "Exporteer de modellen als STL-bestand."

#: src/libslic3r/PrintConfig.cpp:3354
msgid "Slice the model and export toolpaths as G-code."
msgstr "Slice het model en exporteer de bewegingen als gcode-bestand."

#: src/libslic3r/PrintConfig.cpp:3359
msgid "Slice"
msgstr "Slice"

#: src/libslic3r/PrintConfig.cpp:3360
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""
"Slice het model als FFF of SLA, gebaseerd op de 'printer_technology'-"
"configuratiewaarde."

#: src/libslic3r/PrintConfig.cpp:3365
msgid "Help"
msgstr "Help"

#: src/libslic3r/PrintConfig.cpp:3366
msgid "Show this help."
msgstr "Toon deze hulp zien."

#: src/libslic3r/PrintConfig.cpp:3371
msgid "Help (FFF options)"
msgstr "Help (FFF-opties)"

#: src/libslic3r/PrintConfig.cpp:3372
msgid "Show the full list of print/G-code configuration options."
msgstr "Toon de volledige lijst van print- of G-code-configuratie-opties."

#: src/libslic3r/PrintConfig.cpp:3376
msgid "Help (SLA options)"
msgstr "Help (SLA opties)"

#: src/libslic3r/PrintConfig.cpp:3377
msgid "Show the full list of SLA print configuration options."
msgstr "Toon de volledige lijst van SLA-printconfiguratie-opties."

#: src/libslic3r/PrintConfig.cpp:3381
msgid "Output Model Info"
msgstr "Output model-info"

#: src/libslic3r/PrintConfig.cpp:3382
msgid "Write information about the model to the console."
msgstr "Schrijf informatie over het model naar de console."

#: src/libslic3r/PrintConfig.cpp:3386
msgid "Save config file"
msgstr "Sla configuratiebestand op"

#: src/libslic3r/PrintConfig.cpp:3387
msgid "Save configuration to the specified file."
msgstr "Sla configuratie op in aangegeven bestand."

#: src/libslic3r/PrintConfig.cpp:3397
msgid "Align XY"
msgstr "XY uitlijnen"

#: src/libslic3r/PrintConfig.cpp:3398
msgid "Align the model to the given point."
msgstr "Lijn de modellen uit op het gegeven punt."

#: src/libslic3r/PrintConfig.cpp:3403
msgid "Cut model at the given Z."
msgstr "Snijdt model op de ingestelde hoogte."

#: src/libslic3r/PrintConfig.cpp:3424
msgid "Center"
msgstr "Centreer"

#: src/libslic3r/PrintConfig.cpp:3425
msgid "Center the print around the given center."
msgstr "Centreer de print op het middelpunt."

#: src/libslic3r/PrintConfig.cpp:3429
msgid "Don't arrange"
msgstr "Niet schikken"

#: src/libslic3r/PrintConfig.cpp:3430
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""
"Herschik de modellen niet voor het samenvoegen en behoudt de originele X- en "
"Y-coördinaten."

#: src/libslic3r/PrintConfig.cpp:3433
msgid "Duplicate"
msgstr "Dupliceer"

#: src/libslic3r/PrintConfig.cpp:3434
msgid "Multiply copies by this factor."
msgstr "Meerdere kopieën van dit aantal."

#: src/libslic3r/PrintConfig.cpp:3438
msgid "Duplicate by grid"
msgstr "Dupliceer in raster"

#: src/libslic3r/PrintConfig.cpp:3439
msgid "Multiply copies by creating a grid."
msgstr "Meerdere kopieën in raster."

#: src/libslic3r/PrintConfig.cpp:3442
msgid "Merge"
msgstr "Samenvoegen"

#: src/libslic3r/PrintConfig.cpp:3443
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""
"Schik de toegevoegde modellen en combineer ze tot één model om eenmalig "
"acties uit te voeren."

#: src/libslic3r/PrintConfig.cpp:3448
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""
"Probeer alle niet-gesloten meshes te repareren (deze optie is impliciet "
"toegevoegd om, wanneer dat nodig is, onmogelijke modellen toch te slicen)."

#: src/libslic3r/PrintConfig.cpp:3452
msgid "Rotation angle around the Z axis in degrees."
msgstr "Rotatiehoek rond de Z-as in graden."

#: src/libslic3r/PrintConfig.cpp:3456
msgid "Rotate around X"
msgstr "Draai over de X-as"

#: src/libslic3r/PrintConfig.cpp:3457
msgid "Rotation angle around the X axis in degrees."
msgstr "Rotatiehoek rond de X-as in graden."

#: src/libslic3r/PrintConfig.cpp:3461
msgid "Rotate around Y"
msgstr "Draai over de Y-as"

#: src/libslic3r/PrintConfig.cpp:3462
msgid "Rotation angle around the Y axis in degrees."
msgstr "Rotatiehoek rond de Y-as in graden."

#: src/libslic3r/PrintConfig.cpp:3467
msgid "Scaling factor or percentage."
msgstr "Schalingsfactor of percentage."

#: src/libslic3r/PrintConfig.cpp:3472
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""
"Detecteer niet-verbonden onderdelen in het model en deel ze op in "
"verschillende objecten."

#: src/libslic3r/PrintConfig.cpp:3475
msgid "Scale to Fit"
msgstr "Verschaal naar passing"

#: src/libslic3r/PrintConfig.cpp:3476
msgid "Scale to fit the given volume."
msgstr "Verschaal naar passing in het gegeven volume."

#: src/libslic3r/PrintConfig.cpp:3485
msgid "Ignore non-existent config files"
msgstr "Negeer niet-bestaande configuratiebestanden"

#: src/libslic3r/PrintConfig.cpp:3486
msgid "Do not fail if a file supplied to --load does not exist."
msgstr "Geef geen fout als een bestand om te laden niet bestaat."

#: src/libslic3r/PrintConfig.cpp:3489
msgid "Load config file"
msgstr "Laad configuratiebestand"

#: src/libslic3r/PrintConfig.cpp:3490
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""
"Laad configuratie uit een specifiek bestand. Dit kan meerdere keren gebruikt "
"worden om instellingen uit meerdere bestanden te laden."

#: src/libslic3r/PrintConfig.cpp:3493
msgid "Output File"
msgstr "Outputbestand"

#: src/libslic3r/PrintConfig.cpp:3494
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""
"Het bestand waaroverheen wordt geschreven (als dit niet aangegeven is, wort "
"dit gebaseerd op het inputbestand)."

#: src/libslic3r/PrintConfig.cpp:3504
msgid "Data directory"
msgstr "Bestandslocatie voor de data"

#: src/libslic3r/PrintConfig.cpp:3505
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"Laad fabrieksinstellingen en sla op. Dit is handig voor het onderhouden van "
"verschillende profielen of het opnemen van configuraties van een "
"netwerkopslag."

#: src/libslic3r/PrintConfig.cpp:3508
msgid "Logging level"
msgstr "Logboekniveau"

#: src/libslic3r/PrintConfig.cpp:3509
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""
"Stel log-gevoeligheid in. 0: fataal, 1: fout, 2: waarschuwing, 3: info, 4: "
"debug, 5: traceer\n"
"Voorbeeld: loglevel = 2 geeft fataal-, fout- en waarschuwingslevelberichten."

#: src/libslic3r/PrintConfig.cpp:3515
msgid "Render with a software renderer"
msgstr "Render met software-renderer"

#: src/libslic3r/PrintConfig.cpp:3516
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""
"Render met software-renderer. De meegeleverde MESA-software-renderer is "
"geladen in plaats van het standaard OpenGL stuurprogramma."

#: src/libslic3r/PrintObject.cpp:108
msgid "Processing triangulated mesh"
msgstr "Mesh aan het verwerken"

#: src/libslic3r/PrintObject.cpp:152
msgid "Generating perimeters"
msgstr "Perimeters genereren"

#: src/libslic3r/PrintObject.cpp:255
msgid "Preparing infill"
msgstr "Vulling voorbereiden"

#: src/libslic3r/PrintObject.cpp:395
msgid "Generating support material"
msgstr "Support genereren"

#: src/libslic3r/GCode/PreviewData.cpp:347
msgid "Height (mm)"
msgstr "Hoogte (mm)"

#: src/libslic3r/GCode/PreviewData.cpp:349
msgid "Width (mm)"
msgstr "Breedte (mm)"

#: src/libslic3r/GCode/PreviewData.cpp:351
msgid "Speed (mm/s)"
msgstr "Snelheid (mm/s)"

#: src/libslic3r/GCode/PreviewData.cpp:353
msgid "Fan Speed (%)"
msgstr "Ventilatorsnelheid (%)"

#: src/libslic3r/GCode/PreviewData.cpp:355
msgid "Volumetric flow rate (mm³/s)"
msgstr "Volumetrisch debiet (mm³/s)"