# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2019-08-27 17:10+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: src/slic3r/GUI/AboutDialog.cpp:39 src/slic3r/GUI/AboutDialog.cpp:291
msgid "Portions copyright"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:127 src/slic3r/GUI/AboutDialog.cpp:256
msgid "Copyright"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:129
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:199
#, possible-c-format
msgid "About %s"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:231 src/slic3r/GUI/MainFrame.cpp:62
msgid "Version"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:258
msgid "is licensed under the"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:259
msgid "GNU Affero General Public License, version 3"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:260
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:261
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:92
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:93
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:411
msgid "Running post-processing scripts"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:95
msgid "G-code file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:99
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:117
msgid "Slicing complete"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:113
msgid "Masked SLA file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:155
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:413
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:422
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:65
msgid "Shape"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:72
msgid "Rectangular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:76
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:393 src/slic3r/GUI/Plater.cpp:145
#: src/slic3r/GUI/Tab.cpp:2514
msgid "Size"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:77
msgid "Size in X and Y of the rectangular plate."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:83
msgid "Origin"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:84
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:88
msgid "Circular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:91 src/slic3r/GUI/ConfigWizard.cpp:123
#: src/slic3r/GUI/ConfigWizard.cpp:576 src/slic3r/GUI/ConfigWizard.cpp:590
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:390
#: src/slic3r/GUI/WipeTowerDialog.cpp:84 src/slic3r/GUI/wxExtensions.cpp:509
#: src/libslic3r/PrintConfig.cpp:70 src/libslic3r/PrintConfig.cpp:77
#: src/libslic3r/PrintConfig.cpp:86 src/libslic3r/PrintConfig.cpp:220
#: src/libslic3r/PrintConfig.cpp:295 src/libslic3r/PrintConfig.cpp:303
#: src/libslic3r/PrintConfig.cpp:353 src/libslic3r/PrintConfig.cpp:363
#: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:499
#: src/libslic3r/PrintConfig.cpp:517 src/libslic3r/PrintConfig.cpp:695
#: src/libslic3r/PrintConfig.cpp:1215 src/libslic3r/PrintConfig.cpp:1276
#: src/libslic3r/PrintConfig.cpp:1294 src/libslic3r/PrintConfig.cpp:1312
#: src/libslic3r/PrintConfig.cpp:1364 src/libslic3r/PrintConfig.cpp:1374
#: src/libslic3r/PrintConfig.cpp:1495 src/libslic3r/PrintConfig.cpp:1503
#: src/libslic3r/PrintConfig.cpp:1544 src/libslic3r/PrintConfig.cpp:1552
#: src/libslic3r/PrintConfig.cpp:1562 src/libslic3r/PrintConfig.cpp:1570
#: src/libslic3r/PrintConfig.cpp:1578 src/libslic3r/PrintConfig.cpp:1661
#: src/libslic3r/PrintConfig.cpp:1878 src/libslic3r/PrintConfig.cpp:1948
#: src/libslic3r/PrintConfig.cpp:1982 src/libslic3r/PrintConfig.cpp:2176
#: src/libslic3r/PrintConfig.cpp:2183 src/libslic3r/PrintConfig.cpp:2190
#: src/libslic3r/PrintConfig.cpp:2220 src/libslic3r/PrintConfig.cpp:2230
#: src/libslic3r/PrintConfig.cpp:2240 src/libslic3r/PrintConfig.cpp:2403
#: src/libslic3r/PrintConfig.cpp:2510 src/libslic3r/PrintConfig.cpp:2519
#: src/libslic3r/PrintConfig.cpp:2528 src/libslic3r/PrintConfig.cpp:2538
#: src/libslic3r/PrintConfig.cpp:2582 src/libslic3r/PrintConfig.cpp:2592
#: src/libslic3r/PrintConfig.cpp:2604 src/libslic3r/PrintConfig.cpp:2624
#: src/libslic3r/PrintConfig.cpp:2634 src/libslic3r/PrintConfig.cpp:2645
#: src/libslic3r/PrintConfig.cpp:2663 src/libslic3r/PrintConfig.cpp:2678
#: src/libslic3r/PrintConfig.cpp:2692 src/libslic3r/PrintConfig.cpp:2705
#: src/libslic3r/PrintConfig.cpp:2743 src/libslic3r/PrintConfig.cpp:2753
#: src/libslic3r/PrintConfig.cpp:2762 src/libslic3r/PrintConfig.cpp:2772
msgid "mm"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:92 src/libslic3r/PrintConfig.cpp:692
msgid "Diameter"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:93
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:97 src/slic3r/GUI/GUI_Preview.cpp:247
#: src/libslic3r/GCode/PreviewData.cpp:159
msgid "Custom"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:101
msgid "Load shape from STL..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:154
msgid "Settings"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:171
msgid "Texture"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:181 src/slic3r/GUI/BedShapeDialog.cpp:249
msgid "Load..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:189 src/slic3r/GUI/BedShapeDialog.cpp:257
#: src/slic3r/GUI/Tab.cpp:3276
msgid "Remove"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:239
msgid "Model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:464
msgid "Choose an STL file to import bed shape from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:471 src/slic3r/GUI/BedShapeDialog.cpp:520
#: src/slic3r/GUI/BedShapeDialog.cpp:543
msgid "Invalid file format."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:482
msgid "Error! Invalid model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:490
msgid "The selected file contains no geometry."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:494
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:509
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:532
msgid "Choose an STL file to import bed model from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:59 src/slic3r/GUI/ConfigWizard.cpp:535
msgid "Bed Shape"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:218
msgid "Searching for devices"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:225
msgid "Finished"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:16
msgid "Buttons And Text Colors Description"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:36
msgid "Value is the same as the system value"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:53
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
msgid "Upgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Downgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "Before roll back"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
msgid "User"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
msgid "Unknown"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:39
msgid "Active"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45
msgid "slic3r version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1311
msgid "print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:47
msgid "filaments"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:48 src/slic3r/GUI/Preset.cpp:1315
msgid "printer"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 src/slic3r/GUI/Tab.cpp:951
msgid "vendor"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
msgid "min slic3r version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
msgid "max slic3r version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
msgid "model"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
msgid "variants"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:70
#, possible-c-format
msgid "Incompatible with this %s"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:73
msgid "Activate"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:99
msgid "Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:123
msgid "nozzle"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:127
msgid "Alternate nozzles:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:193
msgid "All standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:194 src/slic3r/GUI/Tab.cpp:3326
msgid "All"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:195 src/slic3r/GUI/Plater.cpp:469
#: src/slic3r/GUI/Plater.cpp:607 src/libslic3r/GCode/PreviewData.cpp:146
msgid "None"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:301
#, possible-c-format
msgid "Welcome to the %s Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:303
#, possible-c-format
msgid "Welcome to the %s Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:305
msgid "Welcome"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:309 src/slic3r/GUI/GUI_App.cpp:768
#, possible-c-format
msgid "Run %s"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:311
#, possible-c-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:316
msgid ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:347
#, possible-c-format
msgid "%s Family"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:384
msgid "Custom Printer Setup"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:384
msgid "Custom Printer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:386
msgid "Define a custom printer profile"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:388
msgid "Custom profile name:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:412
msgid "Automatic updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:412
msgid "Updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:420 src/slic3r/GUI/Preferences.cpp:69
msgid "Check for application updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:424
#, possible-c-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:430 src/slic3r/GUI/Preferences.cpp:77
msgid "Update built-in Presets automatically"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:434
#, possible-c-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:437
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:442
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:449
msgid "Other Vendors"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:451
#, possible-c-format
msgid "Pick another vendor supported by %s:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:497
msgid "Firmware Type"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:497 src/slic3r/GUI/Tab.cpp:2139
msgid "Firmware"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:501
msgid "Choose the type of firmware used by your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:535
msgid "Bed Shape and Size"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:538
msgid "Set the shape of your printer's bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:558
msgid "Filament and Nozzle Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:558
msgid "Print Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:572
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:575
msgid "Nozzle Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:585
msgid "Enter the diameter of your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:586
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:589
msgid "Filament Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:623
msgid "Extruder and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:623
msgid "Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:639
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:640
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:643
msgid "Extrusion Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:644 src/slic3r/GUI/ConfigWizard.cpp:658
msgid "°C"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:653
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:654
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:657
msgid "Bed Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1138
msgid "Select all standard printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1141
msgid "< &Back"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1142
msgid "&Next >"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1143
msgid "&Finish"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1144 src/slic3r/GUI/FirmwareDialog.cpp:151
#: src/slic3r/GUI/ProgressStatusBar.cpp:27
msgid "Cancel"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1158
msgid "Prusa FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1161
msgid "Prusa MSLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1230
msgid "Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1231
msgid "Configuration &Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1233
msgid "Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1234
msgid "Configuration &Wizard"
msgstr ""

#: src/slic3r/GUI/Field.cpp:125
msgid "default value"
msgstr ""

#: src/slic3r/GUI/Field.cpp:128
msgid "parameter name"
msgstr ""

#: src/slic3r/GUI/Field.cpp:139 src/slic3r/GUI/OptionsGroup.cpp:569
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:158
#, possible-c-format
msgid "%s doesn't support percentage"
msgstr ""

#: src/slic3r/GUI/Field.cpp:174 src/slic3r/GUI/Field.cpp:197
msgid "Invalid numeric input."
msgstr ""

#: src/slic3r/GUI/Field.cpp:179
msgid "Input value is out of range"
msgstr ""

#: src/slic3r/GUI/Field.cpp:206
#, possible-c-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:209
msgid "Parameter validation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:150
msgid "Flash!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:199
msgid "Flashing failed"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:282
msgid "Flashing succeeded!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing failed. Please see the avrdude log below."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing cancelled."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:332
#, possible-c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454
#, possible-c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:436
#, possible-c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:548
#, possible-c-format
msgid "The %s device could not have been found"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:645
#, possible-c-format
msgid "Error accessing port at %s: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:647
#, possible-c-format
msgid "Error: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:777
msgid "Firmware flasher"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:802
msgid "Firmware image:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:805 src/slic3r/GUI/Tab.cpp:1860
#: src/slic3r/GUI/Tab.cpp:1916
msgid "Browse"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:807
msgid "Serial port:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:809
msgid "Autodetected"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:810
msgid "Rescan"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Progress:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Status:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Ready"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:841
msgid "Advanced: Output log"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:852
#: src/slic3r/GUI/PrintHostDialogs.cpp:161
msgid "Close"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:903
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:904
msgid "Confirmation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:907
msgid "Cancelling..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:534
msgid "Layers heights"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:631
msgid "An object outside the print area was detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:632
msgid "A toolpath outside the print area was detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:633
msgid "SLA supports outside the print area were detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:634
msgid "Some objects are not visible when editing supports"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:636
msgid ""
"An object outside the print area was detected\n"
"Resolve the current problem to continue slicing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1733
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2943
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3479
msgid "Undo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3479
msgid "Redo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3497
#, possible-c-format
msgid "Undo %d Actions"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3497
#, possible-c-format
msgid "Redo %d Actions"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3497
#, possible-c-format
msgid "Undo %d Action"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3497
#, possible-c-format
msgid "Redo %d Action"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3544
msgid "Add..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3552 src/slic3r/GUI/GUI_ObjectList.cpp:1504
#: src/slic3r/GUI/Plater.cpp:3510 src/slic3r/GUI/Plater.cpp:3529
#: src/slic3r/GUI/Tab.cpp:3276
msgid "Delete"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3561 src/slic3r/GUI/Plater.cpp:4158
msgid "Delete all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3570 src/slic3r/GUI/KBShortcutsDialog.cpp:137
#: src/slic3r/GUI/Plater.cpp:2676
msgid "Arrange"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3570 src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3582
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3591
msgid "Paste"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3603
msgid "Add instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3614
msgid "Remove instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3627
msgid "Split to objects"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3637 src/slic3r/GUI/GUI_ObjectList.cpp:1343
msgid "Split to parts"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3650 src/slic3r/GUI/GUI_ObjectList.cpp:2206
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3701 src/slic3r/GUI/MainFrame.cpp:570
msgid "Undo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3701 src/slic3r/GUI/GLCanvas3D.cpp:3734
msgid "Click right mouse button to open History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3718
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3734 src/slic3r/GUI/MainFrame.cpp:573
msgid "Redo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3750
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5528
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5547
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:145 src/libslic3r/PrintConfig.cpp:3213
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:150
msgid "Keep upper part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:151
msgid "Keep lower part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:152
msgid "Rotate lower part upwards"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:155
msgid "Perform cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:45
msgid "Place on face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:48
msgid "Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
msgid "Position (mm)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
msgid "Displacement (mm)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:449
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:496
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:514
#: src/libslic3r/PrintConfig.cpp:3262
msgid "Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:482
msgid "Rotation (deg)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:47
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:392
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:497
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:515
#: src/libslic3r/PrintConfig.cpp:3277
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:292
msgid "Scale (%)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
msgid "Head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
msgid "Lock supports under new islands"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1449
msgid "Remove selected points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
msgid "Remove all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1452
msgid "Apply changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1453
msgid "Discard changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
msgid "Minimal points distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
#: src/libslic3r/PrintConfig.cpp:2652
msgid "Support points density"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1455
msgid "Auto-generate points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
msgid "Manual editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
msgid "Clipping of view"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55
msgid "Reset direction"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:531
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:719
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:920
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:986
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1094
msgid "SLA Support Points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1115
msgid "SLA gizmo turned on"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1137
msgid "Do you want to save your manually edited support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1138
msgid "Save changes?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1150
msgid "SLA gizmo turned off"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1187
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1286
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1355
msgid ""
"Autogeneration will erase all manually edited points.\n"
"\n"
"Are you sure you want to do it?\n"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1357 src/slic3r/GUI/GUI.cpp:289
#: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328
msgid "Warning"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1360
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1412
msgid "SLA gizmo keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1423
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1441
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1444
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1445
msgid "Left click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1441
msgid "Add point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1442
msgid "Right click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1442
msgid "Remove point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1443
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1446
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1447
msgid "Drag"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1443
msgid "Move point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1444
msgid "Add point to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1445
msgid "Remove point from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1446
msgid "Select by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1447
msgid "Deselect by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1448
msgid "Select all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1450
msgid "Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1450
msgid "Move clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1451
msgid "Reset clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1454
msgid "Switch to editing mode"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:141 src/slic3r/GUI/Tab.cpp:3135
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:142
msgid "Please check and fix your object list."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:143 src/slic3r/GUI/Plater.cpp:2245
#: src/slic3r/GUI/Tab.cpp:3137
msgid "Attention!"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:283
msgid "Notice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:132
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:135
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:297
#, possible-c-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:300
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:303
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw_renderer parameter."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:305
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:456
msgid "Changing of an application language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:464 src/slic3r/GUI/GUI_App.cpp:473
msgid "Recreating"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:477
msgid "Loading of current presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:485
msgid "Loading of a mode view"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:565
msgid "Choose one file (3MF/AMF):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:577
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:619
msgid "Select the language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:620
msgid "Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:771
msgid "&Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:771
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:772
msgid "Take Configuration &Snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:772
msgid "Capture a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:775
msgid "&Preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:781
msgid "Application preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:784 src/slic3r/GUI/wxExtensions.cpp:3041
msgid "Simple"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:784
msgid "Simple View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:785 src/slic3r/GUI/GUI_ObjectList.cpp:97
#: src/slic3r/GUI/GUI_ObjectList.cpp:620 src/slic3r/GUI/Tab.cpp:1051
#: src/slic3r/GUI/Tab.cpp:1066 src/slic3r/GUI/Tab.cpp:1164
#: src/slic3r/GUI/Tab.cpp:1167 src/slic3r/GUI/Tab.cpp:1675
#: src/slic3r/GUI/Tab.cpp:2159 src/slic3r/GUI/Tab.cpp:3772
#: src/slic3r/GUI/wxExtensions.cpp:3042 src/libslic3r/PrintConfig.cpp:83
#: src/libslic3r/PrintConfig.cpp:197 src/libslic3r/PrintConfig.cpp:360
#: src/libslic3r/PrintConfig.cpp:1013 src/libslic3r/PrintConfig.cpp:2226
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:785
msgid "Advanced View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:786 src/slic3r/GUI/wxExtensions.cpp:3043
msgid "Expert"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:786
msgid "Expert View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:791
msgid "Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:791
#, possible-c-format
msgid "%s View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:793
msgid "Change Application &Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:795
msgid "Flash printer &firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:795
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:807
msgid "Taking configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:807
msgid "Snapshot name"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:850
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:852
msgid "Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:853
msgid "Language selection"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:876
msgid "&Configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:898
msgid "The presets on the following tabs were modified"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:898 src/slic3r/GUI/Tab.cpp:3123
msgid "Discard changes and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:901
msgid "Unsaved Presets"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:88
#: src/slic3r/GUI/GUI_ObjectList.cpp:611 src/libslic3r/PrintConfig.cpp:67
#: src/libslic3r/PrintConfig.cpp:160 src/libslic3r/PrintConfig.cpp:392
#: src/libslic3r/PrintConfig.cpp:453 src/libslic3r/PrintConfig.cpp:461
#: src/libslic3r/PrintConfig.cpp:867 src/libslic3r/PrintConfig.cpp:1051
#: src/libslic3r/PrintConfig.cpp:1354 src/libslic3r/PrintConfig.cpp:1420
#: src/libslic3r/PrintConfig.cpp:1601 src/libslic3r/PrintConfig.cpp:2037
#: src/libslic3r/PrintConfig.cpp:2095
msgid "Layers and Perimeters"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:89
#: src/slic3r/GUI/GUI_ObjectList.cpp:612 src/slic3r/GUI/Plater.cpp:497
#: src/slic3r/GUI/Tab.cpp:1055 src/slic3r/GUI/Tab.cpp:1056
#: src/libslic3r/PrintConfig.cpp:177 src/libslic3r/PrintConfig.cpp:400
#: src/libslic3r/PrintConfig.cpp:420 src/libslic3r/PrintConfig.cpp:754
#: src/libslic3r/PrintConfig.cpp:768 src/libslic3r/PrintConfig.cpp:805
#: src/libslic3r/PrintConfig.cpp:958 src/libslic3r/PrintConfig.cpp:968
#: src/libslic3r/PrintConfig.cpp:986 src/libslic3r/PrintConfig.cpp:1004
#: src/libslic3r/PrintConfig.cpp:1023 src/libslic3r/PrintConfig.cpp:1708
#: src/libslic3r/PrintConfig.cpp:1725
msgid "Infill"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:90
#: src/slic3r/GUI/GUI_ObjectList.cpp:613 src/slic3r/GUI/GUI_Preview.cpp:244
#: src/slic3r/GUI/Tab.cpp:1084 src/slic3r/GUI/Tab.cpp:1085
#: src/libslic3r/PrintConfig.cpp:344 src/libslic3r/PrintConfig.cpp:1481
#: src/libslic3r/PrintConfig.cpp:1830 src/libslic3r/PrintConfig.cpp:1836
#: src/libslic3r/PrintConfig.cpp:1844 src/libslic3r/PrintConfig.cpp:1856
#: src/libslic3r/PrintConfig.cpp:1866 src/libslic3r/PrintConfig.cpp:1874
#: src/libslic3r/PrintConfig.cpp:1889 src/libslic3r/PrintConfig.cpp:1910
#: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1937
#: src/libslic3r/PrintConfig.cpp:1946 src/libslic3r/PrintConfig.cpp:1955
#: src/libslic3r/PrintConfig.cpp:1966 src/libslic3r/PrintConfig.cpp:1980
#: src/libslic3r/PrintConfig.cpp:1988 src/libslic3r/PrintConfig.cpp:1989
#: src/libslic3r/PrintConfig.cpp:1998 src/libslic3r/PrintConfig.cpp:2006
#: src/libslic3r/PrintConfig.cpp:2020 src/libslic3r/GCode/PreviewData.cpp:156
msgid "Support material"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:94
#: src/slic3r/GUI/GUI_ObjectList.cpp:617 src/libslic3r/PrintConfig.cpp:2202
#: src/libslic3r/PrintConfig.cpp:2210
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:45
msgid "Pad and Support"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:51
msgid "Add part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:52
msgid "Add modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:53
msgid "Add support enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:54
msgid "Add support blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:91 src/slic3r/GUI/GUI_ObjectList.cpp:614
#: src/slic3r/GUI/GUI_Preview.cpp:223 src/slic3r/GUI/Tab.cpp:1109
#: src/libslic3r/PrintConfig.cpp:209 src/libslic3r/PrintConfig.cpp:441
#: src/libslic3r/PrintConfig.cpp:896 src/libslic3r/PrintConfig.cpp:1024
#: src/libslic3r/PrintConfig.cpp:1410 src/libslic3r/PrintConfig.cpp:1647
#: src/libslic3r/PrintConfig.cpp:1696 src/libslic3r/PrintConfig.cpp:1747
#: src/libslic3r/PrintConfig.cpp:2080
msgid "Speed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:92 src/slic3r/GUI/GUI_ObjectList.cpp:615
#: src/slic3r/GUI/Tab.cpp:1144 src/slic3r/GUI/Tab.cpp:2033
#: src/libslic3r/PrintConfig.cpp:471 src/libslic3r/PrintConfig.cpp:979
#: src/libslic3r/PrintConfig.cpp:1389 src/libslic3r/PrintConfig.cpp:1717
#: src/libslic3r/PrintConfig.cpp:1902 src/libslic3r/PrintConfig.cpp:1928
msgid "Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:93 src/slic3r/GUI/GUI_ObjectList.cpp:616
#: src/libslic3r/PrintConfig.cpp:431 src/libslic3r/PrintConfig.cpp:538
#: src/libslic3r/PrintConfig.cpp:855 src/libslic3r/PrintConfig.cpp:987
#: src/libslic3r/PrintConfig.cpp:1398 src/libslic3r/PrintConfig.cpp:1737
#: src/libslic3r/PrintConfig.cpp:1911 src/libslic3r/PrintConfig.cpp:2069
msgid "Extrusion Width"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:99 src/slic3r/GUI/GUI_ObjectList.cpp:622
#: src/slic3r/GUI/Plater.cpp:465 src/slic3r/GUI/Tab.cpp:3727
#: src/slic3r/GUI/Tab.cpp:3728 src/libslic3r/PrintConfig.cpp:2501
#: src/libslic3r/PrintConfig.cpp:2508 src/libslic3r/PrintConfig.cpp:2517
#: src/libslic3r/PrintConfig.cpp:2526 src/libslic3r/PrintConfig.cpp:2536
#: src/libslic3r/PrintConfig.cpp:2562 src/libslic3r/PrintConfig.cpp:2569
#: src/libslic3r/PrintConfig.cpp:2580 src/libslic3r/PrintConfig.cpp:2590
#: src/libslic3r/PrintConfig.cpp:2599 src/libslic3r/PrintConfig.cpp:2612
#: src/libslic3r/PrintConfig.cpp:2622 src/libslic3r/PrintConfig.cpp:2631
#: src/libslic3r/PrintConfig.cpp:2641 src/libslic3r/PrintConfig.cpp:2653
#: src/libslic3r/PrintConfig.cpp:2661
msgid "Supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:100 src/slic3r/GUI/GUI_ObjectList.cpp:623
#: src/slic3r/GUI/Plater.cpp:603 src/slic3r/GUI/Tab.cpp:3756
#: src/slic3r/GUI/Tab.cpp:3757 src/libslic3r/PrintConfig.cpp:2669
#: src/libslic3r/PrintConfig.cpp:2676 src/libslic3r/PrintConfig.cpp:2690
#: src/libslic3r/PrintConfig.cpp:2700 src/libslic3r/PrintConfig.cpp:2722
#: src/libslic3r/PrintConfig.cpp:2733 src/libslic3r/PrintConfig.cpp:2740
#: src/libslic3r/PrintConfig.cpp:2751 src/libslic3r/PrintConfig.cpp:2760
#: src/libslic3r/PrintConfig.cpp:2769
msgid "Pad"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:260
msgid "Name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:318
#, possible-c-format
msgid "Auto-repaired (%d errors):\n"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:325
msgid "degenerate facets"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:326
msgid "edges fixed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:327
msgid "facets removed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:328
msgid "facets added"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:329
msgid "facets reversed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:330
msgid "backwards edges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:338
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:373
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:375
msgid "Right button click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:377
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:381
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:383
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:428 src/slic3r/GUI/GUI_ObjectList.cpp:449
#: src/slic3r/GUI/GUI_ObjectList.cpp:461 src/slic3r/GUI/GUI_ObjectList.cpp:3642
#: src/slic3r/GUI/GUI_ObjectList.cpp:3652
#: src/slic3r/GUI/GUI_ObjectList.cpp:3684 src/slic3r/GUI/wxExtensions.cpp:603
#: src/slic3r/GUI/wxExtensions.cpp:660 src/slic3r/GUI/wxExtensions.cpp:685
#: src/slic3r/GUI/wxExtensions.cpp:897
msgid "default"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:433 src/slic3r/GUI/Tab.cpp:1639
#: src/libslic3r/PrintConfig.cpp:470
msgid "Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:546
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:546
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:992 src/slic3r/GUI/GUI_ObjectList.cpp:3464
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1010
msgid "Remove Volume(s)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1065
#: src/slic3r/GUI/GUI_ObjectList.cpp:1379
#: src/slic3r/GUI/GUI_ObjectList.cpp:1385
#: src/slic3r/GUI/GUI_ObjectList.cpp:1626
#, possible-c-format
msgid "Quick Add Settings (%s)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1140
msgid "Select showing settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1189
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1190
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1191
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1252
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1253
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1254
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1293
msgid "Load"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1298
#: src/slic3r/GUI/GUI_ObjectList.cpp:1323
#: src/slic3r/GUI/GUI_ObjectList.cpp:1326
msgid "Box"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1298
msgid "Cylinder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1298
msgid "Sphere"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1298
msgid "Slab"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1350
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1358
msgid "Add settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1425
msgid "Change type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1432
#: src/slic3r/GUI/GUI_ObjectList.cpp:1580
msgid "Set as a Separated Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1438
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1445
msgid "Rename"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1456
msgid "Fix through the Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1466 src/slic3r/GUI/Plater.cpp:3542
msgid "Export as STL"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1473
msgid "Change extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1492 src/libslic3r/PrintConfig.cpp:309
msgid "Default"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1498
msgid "Select new extruder for the object/part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1510
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1510
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1580
msgid "Set as a Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1655
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1690
msgid "Error!"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1735
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1742
msgid "Generic"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1846
#: src/slic3r/GUI/GUI_ObjectList.cpp:1948
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1858
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1882
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1898
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1929
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1933
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1952
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1976 src/slic3r/GUI/Plater.cpp:2833
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1980
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2028
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2153
msgid "Group manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2165
msgid "Object manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2178
msgid "Object Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2182
msgid "Part Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2187
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2193
msgid "Part manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2199
msgid "Instance manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2206
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2391
msgid "Delete Selected Item"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2525
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2584
#: src/slic3r/GUI/GUI_ObjectList.cpp:2613
#: src/slic3r/GUI/GUI_ObjectList.cpp:2631
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2690
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2974
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2982
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3100
msgid "Object or Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3101
#: src/slic3r/GUI/GUI_ObjectList.cpp:3234
msgid "Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3101
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3103
msgid "Unsupported selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3104
#, possible-c-format
msgid "You started your selection with %s Item."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3105
#, possible-c-format
msgid "In this mode you can select only other %s Items%s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3108
msgid "of a current Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3113
#: src/slic3r/GUI/GUI_ObjectList.cpp:3188 src/slic3r/GUI/Plater.cpp:126
msgid "Info"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3229
msgid "You can't change a type of the last solid part of the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3234
msgid "Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3234
msgid "Support Enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3234
msgid "Support Blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3236
msgid "Type:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3236
msgid "Select type of part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3241
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3486
msgid "Enter new name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3486
msgid "Renaming"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3502
#: src/slic3r/GUI/GUI_ObjectList.cpp:3608 src/slic3r/GUI/Tab.cpp:3608
#: src/slic3r/GUI/Tab.cpp:3612
msgid "The supplied name is not valid;"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3503
#: src/slic3r/GUI/GUI_ObjectList.cpp:3609 src/slic3r/GUI/Tab.cpp:3609
msgid "the following characters are not allowed:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3632
msgid "Set extruder for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3633
msgid "Select extruder number for selected objects and/or parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3646
msgid "Select extruder number:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3647
msgid "This extruder will be set for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3759
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3759
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:105
msgid "World coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:106
msgid "Local coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:82
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:125
msgid "Object Manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:178
msgid "Object name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:214
#, possible-c-format
msgid "Toggle %c axis mirroring"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:247
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:287
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:292
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:330
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:342
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:390
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:454
msgid "Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:391
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:455
msgid "Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:456
msgid "Scale factors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:513
msgid "Translate"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:565
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:727
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:758
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:823
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:907
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:910
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:59
msgid "Additional Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:95
msgid "Remove parameter"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:101
#, possible-c-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:146
#, possible-c-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:217
msgid "View"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:220 src/slic3r/GUI/GUI_Preview.cpp:569
#: src/libslic3r/GCode/PreviewData.cpp:378
msgid "Feature type"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:221 src/libslic3r/PrintConfig.cpp:483
msgid "Height"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:222 src/libslic3r/PrintConfig.cpp:2188
msgid "Width"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:224
msgid "Volumetric flow rate"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:225 src/slic3r/GUI/GUI_Preview.cpp:333
#: src/slic3r/GUI/GUI_Preview.cpp:515 src/slic3r/GUI/GUI_Preview.cpp:568
#: src/slic3r/GUI/GUI_Preview.cpp:769 src/libslic3r/GCode/PreviewData.cpp:388
msgid "Tool"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:226 src/slic3r/GUI/GUI_Preview.cpp:566
#: src/libslic3r/GCode/PreviewData.cpp:390
msgid "Color Print"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:229
msgid "Show"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:232 src/slic3r/GUI/GUI_Preview.cpp:233
msgid "Feature types"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:235 src/libslic3r/GCode/PreviewData.cpp:147
msgid "Perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:236 src/libslic3r/GCode/PreviewData.cpp:148
msgid "External perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/GCode/PreviewData.cpp:149
msgid "Overhang perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/GCode/PreviewData.cpp:150
msgid "Internal infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/PrintConfig.cpp:1736
#: src/libslic3r/PrintConfig.cpp:1746 src/libslic3r/GCode/PreviewData.cpp:151
msgid "Solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/PrintConfig.cpp:2068
#: src/libslic3r/PrintConfig.cpp:2079 src/libslic3r/GCode/PreviewData.cpp:152
msgid "Top solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/GCode/PreviewData.cpp:153
msgid "Bridge infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/PrintConfig.cpp:895
#: src/libslic3r/GCode/PreviewData.cpp:154
msgid "Gap fill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/slic3r/GUI/Tab.cpp:1075
#: src/libslic3r/GCode/PreviewData.cpp:155
msgid "Skirt"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:245 src/libslic3r/PrintConfig.cpp:1954
#: src/libslic3r/GCode/PreviewData.cpp:157
msgid "Support material interface"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:246 src/slic3r/GUI/Tab.cpp:1155
#: src/libslic3r/GCode/PreviewData.cpp:158
msgid "Wipe tower"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:251 src/libslic3r/PrintConfig.cpp:2102
msgid "Travel"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:252
msgid "Retractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:253
msgid "Unretractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:254
msgid "Shells"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:255
msgid "Legend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:14 src/slic3r/GUI/MainFrame.cpp:683
msgid "Keyboard Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Load Config from .ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 src/slic3r/GUI/Plater.cpp:837
#: src/slic3r/GUI/Plater.cpp:4808 src/libslic3r/PrintConfig.cpp:3164
msgid "Export G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Save project (3MF)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Load Config from .ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "(Re)slice"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
msgid "Select Plater Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Select Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Select Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Select Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Switch to 3D"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Switch to Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:10
msgid "Preferences"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
#: src/slic3r/GUI/PrintHostDialogs.cpp:136
msgid "Print host upload queue"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
msgid "Camera view"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Add Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Remove Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
msgid "Show keyboard shortcuts list"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
msgid "Press to select multiple object or move multiple object with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
msgid "Main Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Select All objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Delete selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Delete All"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Copy to clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Paste from clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Gizmo rotate"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Gizmo cut"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Gizmo Place face on bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Gizmo SLA support points"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
#, possible-c-format
msgid ""
"Press to activate selection rectangle\n"
"or to snap by 5% in Gizmo scale\n"
"or to snap by 1mm in Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid ""
"Press to scale selection to fit print volume\n"
"in Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid ""
"Press to activate deselection rectangle\n"
"or to scale or rotate selected objects\n"
"around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Press to activate one direction scaling in Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Zoom to Bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Zoom to all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Zoom to selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Zoom in"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Zoom out"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Unselect gizmo / Clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Plater Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:181
#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid "Arrow Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:181
#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
msgid "Upper Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
msgid "Arrow Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
msgid "Lower Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
msgid "Show/Hide (L)egend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
msgid "Preview Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid "Move current slider thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
msgid "Move current slider thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
msgid "Arrow Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
msgid "Set upper thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Arrow Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Set lower thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Add color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Delete color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
msgid "Layers Slider Shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:64
msgid ""
" - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/"
"releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:159
msgid "based on Slic3r"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:189
msgid "Plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:400
msgid "&New Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:400
msgid "Start a new project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:403
msgid "&Open Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:403
msgid "Open a project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:408
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:417
msgid "The selected project is no more available"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:417 src/slic3r/GUI/MainFrame.cpp:755
#: src/slic3r/GUI/PrintHostDialogs.cpp:231
msgid "Error"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:441
msgid "&Save Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:441
msgid "Save current project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:445 src/slic3r/GUI/MainFrame.cpp:447
msgid "Save Project &as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:445 src/slic3r/GUI/MainFrame.cpp:447
msgid "Save current project file as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:455
msgid "Import STL/OBJ/AM&F/3MF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:455
msgid "Load a model"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:459
msgid "Import &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:459
msgid "Load exported configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:461
msgid "Import Config from &project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:461
msgid "Load configuration from project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:464
msgid "Import Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:464
msgid "Load presets from a bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:466
msgid "&Import"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:469 src/slic3r/GUI/MainFrame.cpp:719
msgid "Export &G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:469
msgid "Export current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:473 src/slic3r/GUI/MainFrame.cpp:720
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:473
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:478
msgid "Export plate as &STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:478
msgid "Export current plate as STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:481
msgid "Export plate as STL &including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:481
msgid "Export current plate as STL including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:484
msgid "Export plate as &AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:484
msgid "Export current plate as AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:488
msgid "Export &toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:488
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Export &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Export current configuration to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:494
msgid "Export Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:494
msgid "Export all presets to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:496
msgid "&Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:502
msgid "Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:502
msgid "Slice a file into a G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:508
msgid "Quick Slice and Save As"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:508
msgid "Slice a file into a G-code, save as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:514
msgid "Repeat Last Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:514
msgid "Repeat last quick slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:522
msgid "(Re)Slice No&w"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:522
msgid "Start new slicing process"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:526
msgid "&Repair STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:526
msgid "Automatically repair an STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:529
msgid "&Quit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:529
#, possible-c-format
msgid "Quit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:554
msgid "&Select all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:555
msgid "Selects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:557
msgid "D&eselect all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:558
msgid "Deselects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:561
msgid "&Delete selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:562
msgid "Deletes the current selection"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:564
msgid "Delete &all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:565
msgid "Deletes all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:569
msgid "&Undo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:572
msgid "&Redo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:577
msgid "&Copy"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:578
msgid "Copy selection to clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:580
msgid "&Paste"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:581
msgid "Paste clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:590
msgid "&Plater Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:590
msgid "Show the plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:597
msgid "P&rint Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:597
msgid "Show the print settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:599 src/slic3r/GUI/MainFrame.cpp:722
msgid "&Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:599
msgid "Show the filament settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:602
msgid "Print&er Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:602
msgid "Show the printer settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:606
msgid "3&D"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:606
msgid "Show the 3D editing view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:609
msgid "Pre&view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:609
msgid "Show the 3D slices preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:628
msgid "Print &Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:628
msgid "Display the Print Host Upload Queue window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:637
msgid "Iso"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:637
msgid "Iso View"
msgstr ""

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:641 src/libslic3r/PrintConfig.cpp:2094
msgid "Top"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:641
msgid "Top View"
msgstr ""

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#: src/slic3r/GUI/MainFrame.cpp:644 src/libslic3r/PrintConfig.cpp:159
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:644
msgid "Bottom View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:646
msgid "Front"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:646
msgid "Front View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:648 src/libslic3r/PrintConfig.cpp:1611
msgid "Rear"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:648
msgid "Rear View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:650
msgid "Left"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:650
msgid "Left View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:652
msgid "Right"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:652
msgid "Right View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:659
msgid "Prusa 3D &Drivers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:659
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:661
msgid "Software &Releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:661
msgid "Open the software releases page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:667
#, possible-c-format
msgid "%s &Website"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:668
#, possible-c-format
msgid "Open the %s website in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:674
msgid "System &Info"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:674
msgid "Show system information"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:676
msgid "Show &Configuration Folder"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:676
msgid "Show user configuration folder (datadir)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:678
msgid "Report an I&ssue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:678
#, possible-c-format
msgid "Report an issue on %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:680
#, possible-c-format
msgid "&About %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:680
msgid "Show about dialog"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:683
msgid "Show the list of the keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:691
msgid "&File"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:692
msgid "&Edit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:693
msgid "&Window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:694
msgid "&View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:697
msgid "&Help"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:719
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:720
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:722
msgid "Mate&rial Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:743
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:754
msgid "No previously sliced file."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:760
msgid "Previously sliced file ("
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:760
msgid ") not found."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:761
msgid "File Not Found"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:796
#, possible-c-format
msgid "Save %s file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:796
msgid "SVG"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:796
msgid "G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:808
msgid "Save zip file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:817 src/slic3r/GUI/Plater.cpp:2976
#: src/slic3r/GUI/Plater.cpp:4519 src/slic3r/GUI/Tab.cpp:1184
#: src/slic3r/GUI/Tab.cpp:3773
msgid "Slicing"
msgstr ""

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:819
#, possible-c-format
msgid "Processing %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:842
msgid " was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:844
msgid "Slicing Done!"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:859
msgid "Select the STL file to repair:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:869
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:881
msgid "Your file was repaired."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:881 src/libslic3r/PrintConfig.cpp:3258
msgid "Repair"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:895
msgid "Save configuration as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:914 src/slic3r/GUI/MainFrame.cpp:976
msgid "Select configuration to load:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:950
msgid "Save presets bundle as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:997
#, possible-c-format
msgid "%d presets successfully imported."
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:73
#, possible-c-format
msgid "%s error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:74
#, possible-c-format
msgid "%s has encountered an error"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:249
msgctxt "Layers"
msgid "Top"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:249
msgctxt "Layers"
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:146
msgid "Volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:147
msgid "Facets"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:148
msgid "Materials"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:151
msgid "Manifold"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:201
msgid "Sliced Info"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:220 src/slic3r/GUI/Plater.cpp:1150
msgid "Used Filament (m)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:221
msgid "Used Filament (mm³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:222
msgid "Used Filament (g)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:223
msgid "Used Material (unit)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:224 src/slic3r/GUI/Plater.cpp:1165
#: src/libslic3r/PrintConfig.cpp:742
msgid "Cost"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:225 src/slic3r/GUI/Plater.cpp:1137
#: src/slic3r/GUI/Plater.cpp:1179
msgid "Estimated printing time"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:226
msgid "Number of tool changes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:316
msgid "Click to edit preset"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:468
msgid "Select what kind of support do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:470 src/libslic3r/PrintConfig.cpp:1865
#: src/libslic3r/PrintConfig.cpp:2561
msgid "Support on build plate only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:471 src/slic3r/GUI/Plater.cpp:592
msgid "For support enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:472
msgid "Everywhere"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:504 src/slic3r/GUI/Tab.cpp:1081
msgid "Brim"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:506
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:514
msgid "Purging volumes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:606
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:608
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:609
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:781
msgid "Print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:782 src/slic3r/GUI/Tab.cpp:1630
#: src/slic3r/GUI/Tab.cpp:1631
msgid "Filament"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:783
msgid "SLA print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:784 src/slic3r/GUI/Preset.cpp:1314
msgid "SLA material"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:785
msgid "Printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:835 src/slic3r/GUI/Plater.cpp:4809
msgid "Send to printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:838 src/slic3r/GUI/Plater.cpp:2976
#: src/slic3r/GUI/Plater.cpp:4522
msgid "Slice now"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:978
msgid "Hold Shift to Slice & Export G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1083
#, possible-c-format
msgid "%d (%d shells)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1088
#, possible-c-format
msgid "Auto-repaired (%d errors)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1091
#, possible-c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1101
msgid "Yes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1124
msgid "Used Material (ml)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1127
msgid "object(s)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1127
msgid "supports and pad"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1152 src/slic3r/GUI/Plater.cpp:1167
msgid "objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1152 src/slic3r/GUI/Plater.cpp:1167
msgid "wipe tower"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1182
msgid "normal mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1186 src/slic3r/GUI/Plater.cpp:1195
msgid "Color "
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1191
msgid "stealth mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1286
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1290
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1518
msgid "ERROR: not enough resources to execute a new job."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2088
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2205
msgid "Loading"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2215
#, possible-c-format
msgid "Processing input file %s\n"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2243
msgid ""
"You can't load SLA project if there is at least one multi-part object on the "
"bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2244 src/slic3r/GUI/Tab.cpp:3136
msgid "Please check your object list before preset changing."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2287
msgid ""
"This file contains several objects positioned at multiple heights. Instead "
"of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?\n"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2290 src/slic3r/GUI/Plater.cpp:2342
msgid "Multi-part object detected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2297
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?\n"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2298
msgid "Detected advanced data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2319
#, possible-c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2339
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?\n"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2355
msgid "Loaded"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2453
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2454
msgid "Object too large?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2512
msgid "Export STL file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2519
msgid "Export AMF file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2525
msgid "Save file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2531
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2633
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2644
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2683
msgid "Optimize Rotation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2729
msgid "Arranging"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2752
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2758
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2759
msgid "Arranging done."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2775
msgid "Searching for optimal orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2808
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2809
msgid "Orientation found."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2825
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2836
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2961
msgid "Invalid data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2970
msgid "Ready to slice"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3008 src/slic3r/GUI/PrintHostDialogs.cpp:232
msgid "Cancelling"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3025
msgid "Another export job is currently running."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3079 src/slic3r/GUI/Plater.cpp:3539
msgid "Reload from Disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3115
msgid "Fix Throught NetFabb"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3297
msgid "Export failed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3302 src/slic3r/GUI/PrintHostDialogs.cpp:233
msgid "Cancelled"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3390 src/slic3r/GUI/Plater.cpp:3402
#: src/slic3r/GUI/Plater.cpp:3516
msgid "Increase copies"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3510 src/slic3r/GUI/Plater.cpp:3529
msgid "Remove the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3516
msgid "Place one more copy of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3518
msgid "Decrease copies"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3518
msgid "Remove one copy of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3520
msgid "Set number of copies"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3520
msgid "Change the number of copies of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3539
msgid "Reload the selected file from Disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3542
msgid "Export the selected object as STL file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3567
msgid "Along X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3567
msgid "Mirror the selected object along the X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3569
msgid "Along Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3569
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3571
msgid "Along Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3571
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3574
msgid "Mirror"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3574
msgid "Mirror the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3586
msgid "To objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3586 src/slic3r/GUI/Plater.cpp:3606
msgid "Split the selected object into individual objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3588
msgid "To parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3588 src/slic3r/GUI/Plater.cpp:3620
msgid "Split the selected object into individual sub-parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3591 src/slic3r/GUI/Plater.cpp:3606
#: src/slic3r/GUI/Plater.cpp:3620 src/libslic3r/PrintConfig.cpp:3282
msgid "Split"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3591
msgid "Split the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3612
msgid "Optimize orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3612
msgid "Optimize the rotation of the object for better print results."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3652
msgid "3D editor view"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3660 src/slic3r/GUI/Tab.cpp:2580
msgid "Preview"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3897
msgid ""
"%1% printer was active at the time the target Undo / Redo snapshot was "
"taken. Switching to %1% printer requires reloading of %1% presets."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4071
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4095
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4099
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4158
msgid "All objects will be removed, continue ?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4166
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4174
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4210
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4246
#, possible-c-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4276
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4308
msgid "Save G-code file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4308
msgid "Save SL1 file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4420
#, possible-c-format
msgid "STL file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4436
#, possible-c-format
msgid "AMF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4439
#, possible-c-format
msgid "Error exporting AMF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4465
#, possible-c-format
msgid "3MF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4470
#, possible-c-format
msgid "Error exporting 3MF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4808
msgid "Export"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4809
msgid "Send G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4893
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:22 src/slic3r/GUI/Tab.cpp:1991
#: src/slic3r/GUI/Tab.cpp:2232
msgid "General"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:44
msgid "Remember output directory"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:46
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:52
msgid "Auto-center parts"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:54
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:60
msgid "Background processing"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:62
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:71
msgid ""
"If enabled, PrusaSlicer will check for the new versions of itself online. "
"When a new version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:79
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:84
msgid "Suppress \" - default - \" presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:86
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:92
msgid "Show incompatible print and filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:94
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:101
msgid "Use Retina resolution for the 3D scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:103
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:110
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:112
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:117
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:119
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:144
#, possible-c-format
msgid "You need to restart %s to make the changes effective."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:192
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:207
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preset.cpp:212
msgid "modified"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:967 src/slic3r/GUI/Preset.cpp:1007
#: src/slic3r/GUI/Preset.cpp:1072 src/slic3r/GUI/Preset.cpp:1104
#: src/slic3r/GUI/PresetBundle.cpp:1484 src/slic3r/GUI/PresetBundle.cpp:1554
msgid "System presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1011 src/slic3r/GUI/Preset.cpp:1108
#: src/slic3r/GUI/PresetBundle.cpp:1559
msgid "User presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1040 src/slic3r/GUI/Tab.cpp:243
msgid "Add a new printer"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1312
msgid "filament"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1313
msgid "SLA print"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:28
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:35
msgid ""
"\n"
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:39
msgid ""
"\n"
"During the other layers, fan"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:41
msgid "Fan"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:47
msgid "will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:50
msgid "except for the first %1% layers."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:52
msgid "except for the first layer."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:54
msgid "will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:155
msgid "external perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:164
msgid "perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:173
msgid "infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "top solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:202
msgid "support"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:212
msgid "support interface"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:218
msgid "First layer volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:218
msgid "Bridging volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:218
msgid "Volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "flow rate is maximized"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:222
msgid "by the print profile maximum"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:223
msgid "when printing"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:224
msgid "with a volumetric rate"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:228
#, possible-c-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:246
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:262
#, possible-c-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:268
#, possible-c-format
msgid "%d lines: %.2f mm"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Send G-Code to printer host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Upload to Printer Host with the following filename:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Start printing after upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:149
msgid "ID"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:150
msgid "Progress"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:151
msgid "Status"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:152
msgid "Host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:153
msgid "Filename"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:154
msgid "Error Message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:157
msgid "Cancel selected"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:159
msgid "Show error message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:198
#: src/slic3r/GUI/PrintHostDialogs.cpp:229
msgid "Enqueued"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:230
msgid "Uploading"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:234
msgid "Completed"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:272
msgid "Error uploading to print host:"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:82
#: src/libslic3r/PrintConfig.cpp:627 src/libslic3r/PrintConfig.cpp:671
#: src/libslic3r/PrintConfig.cpp:686 src/libslic3r/PrintConfig.cpp:2349
#: src/libslic3r/PrintConfig.cpp:2358 src/libslic3r/PrintConfig.cpp:2418
#: src/libslic3r/PrintConfig.cpp:2426 src/libslic3r/PrintConfig.cpp:2434
#: src/libslic3r/PrintConfig.cpp:2441 src/libslic3r/PrintConfig.cpp:2449
#: src/libslic3r/PrintConfig.cpp:2457
msgid "s"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:584
#: src/libslic3r/PrintConfig.cpp:1234
msgid "mm³/s"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:78
msgid "System Information"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:154
msgid "Copy to Clipboard"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:52 src/libslic3r/PrintConfig.cpp:239
msgid "Compatible printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:53
msgid "Select the printers this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:58 src/libslic3r/PrintConfig.cpp:254
msgid "Compatible print profiles"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:59
msgid "Select the print profiles this profile is compatible with."
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:135
#, possible-c-format
msgid "Save current %s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:136
msgid "Delete this preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:141
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:933
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:935
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:937
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:940
#, possible-c-format
msgid ""
"Current preset is inherited from:\n"
"\t%s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:944
msgid "It can't be deleted or modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:945
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:946
msgid "To do that please specify a new name for the preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:950
msgid "Additional information:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:956
msgid "printer model"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:964
msgid "default print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:967
msgid "default filament profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:981
msgid "default SLA material profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:985
msgid "default SLA print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1022 src/slic3r/GUI/Tab.cpp:3721
msgid "Layers and perimeters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1023 src/libslic3r/PrintConfig.cpp:66
msgid "Layer height"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1027
msgid "Vertical shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1038
msgid "Horizontal shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1039 src/libslic3r/PrintConfig.cpp:1759
msgid "Solid layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1044
msgid "Quality (slower slicing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1062
msgid "Reducing printing time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1074
msgid "Skirt and brim"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1091
msgid "Raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1095
msgid "Options for support material and raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1110
msgid "Speed for print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1122
msgid "Speed for non-print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1125
msgid "Modifiers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1128
msgid "Acceleration control (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1135
msgid "Autospeed (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1143
msgid "Multiple Extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1151
msgid "Ooze prevention"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1168
msgid "Extrusion width"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1178
msgid "Overlap"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1181
msgid "Flow"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1190
msgid "Other"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1193 src/slic3r/GUI/Tab.cpp:3776
msgid "Output options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1194
msgid "Sequential printing"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1196
msgid "Extruder clearance (mm)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1205 src/slic3r/GUI/Tab.cpp:3777
msgid "Output file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1212 src/libslic3r/PrintConfig.cpp:1432
msgid "Post-processing scripts"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1218 src/slic3r/GUI/Tab.cpp:1219
#: src/slic3r/GUI/Tab.cpp:1742 src/slic3r/GUI/Tab.cpp:1743
#: src/slic3r/GUI/Tab.cpp:2204 src/slic3r/GUI/Tab.cpp:2205
#: src/slic3r/GUI/Tab.cpp:2318 src/slic3r/GUI/Tab.cpp:2319
#: src/slic3r/GUI/Tab.cpp:3658 src/slic3r/GUI/Tab.cpp:3659
msgid "Notes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1225 src/slic3r/GUI/Tab.cpp:1750
#: src/slic3r/GUI/Tab.cpp:2211 src/slic3r/GUI/Tab.cpp:2325
#: src/slic3r/GUI/Tab.cpp:3666 src/slic3r/GUI/Tab.cpp:3782
msgid "Dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1226 src/slic3r/GUI/Tab.cpp:1751
#: src/slic3r/GUI/Tab.cpp:2212 src/slic3r/GUI/Tab.cpp:2326
#: src/slic3r/GUI/Tab.cpp:3667 src/slic3r/GUI/Tab.cpp:3783
msgid "Profile dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1583
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1529 src/slic3r/GUI/Tab.cpp:1588
#: src/slic3r/GUI/Tab.cpp:2560
msgid "Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1638 src/libslic3r/PrintConfig.cpp:2030
msgid "Temperature"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1644
msgid "Bed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1649
msgid "Cooling"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1650 src/libslic3r/PrintConfig.cpp:1335
#: src/libslic3r/PrintConfig.cpp:2150
msgid "Enable"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1661
msgid "Fan settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1662
msgid "Fan speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1670
msgid "Cooling thresholds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1676
msgid "Filament properties"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1680
msgid "Print speed override"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1690
msgid "Wipe tower parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1693
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1707
msgid "Ramming settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1729 src/slic3r/GUI/Tab.cpp:2167
msgid "Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1730 src/slic3r/GUI/Tab.cpp:2168
#: src/libslic3r/PrintConfig.cpp:1785 src/libslic3r/PrintConfig.cpp:1800
msgid "Start G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1736 src/slic3r/GUI/Tab.cpp:2174
#: src/libslic3r/PrintConfig.cpp:369 src/libslic3r/PrintConfig.cpp:379
msgid "End G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1793
msgid ""
"Volumetric flow hints not available\n"
"\n"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1879 src/slic3r/GUI/Tab.cpp:2107
msgid "Test"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1889
msgid "Could not get a valid Printer Host reference"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1895 src/slic3r/GUI/Tab.cpp:2120
msgid "Success!"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1910
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1923
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1924
msgid "Open CA certificate file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1952
#, possible-c-format
msgid ""
"HTTPS CA File:\n"
"    \tOn this system, %s uses HTTPS certificates from the system Certificate "
"Store or Keychain.\n"
"    \tTo use a custom CA file, please import your CA file into Certificate "
"Store / Keychain."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1992 src/slic3r/GUI/Tab.cpp:2233
msgid "Size and coordinates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1997 src/slic3r/GUI/Tab.cpp:2238
#: src/slic3r/GUI/Tab.cpp:3328
msgid "Set"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2029
msgid "Capabilities"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2034
msgid "Number of extruders of the printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2059
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2062 src/slic3r/GUI/Tab.cpp:2530
#: src/libslic3r/PrintConfig.cpp:1310
msgid "Nozzle diameter"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2092
msgid "USB/Serial connection"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2093 src/libslic3r/PrintConfig.cpp:1640
msgid "Serial port"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2098
msgid "Rescan serial ports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2120
msgid "Connection to printer works correctly."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2123
msgid "Connection failed."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2136 src/slic3r/GUI/Tab.cpp:2313
msgid "Print Host upload"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2180 src/libslic3r/PrintConfig.cpp:138
msgid "Before layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2186 src/libslic3r/PrintConfig.cpp:1056
msgid "After layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2192 src/libslic3r/PrintConfig.cpp:2056
msgid "Tool change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2198
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2270
msgid "Display"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2285
msgid "Tilt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2286
msgid "Tilt time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/Tab.cpp:3640
msgid "Corrections"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2307 src/slic3r/GUI/Tab.cpp:3636
msgid "Exposure"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2378 src/slic3r/GUI/Tab.cpp:2463
#: src/libslic3r/PrintConfig.cpp:1106 src/libslic3r/PrintConfig.cpp:1124
#: src/libslic3r/PrintConfig.cpp:1142 src/libslic3r/PrintConfig.cpp:1159
#: src/libslic3r/PrintConfig.cpp:1170 src/libslic3r/PrintConfig.cpp:1181
#: src/libslic3r/PrintConfig.cpp:1192
msgid "Machine limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2392
msgid "Values in this column are for Normal mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2393
msgid "Normal"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2398
msgid "Values in this column are for Stealth mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2399
msgid "Stealth"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2407
msgid "Maximum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2412
msgid "Maximum accelerations"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2419
msgid "Jerk limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2424
msgid "Minimum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2488 src/slic3r/GUI/Tab.cpp:2496
msgid "Single extruder MM setup"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2497
msgid "Single extruder multimaterial parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2510 src/libslic3r/GCode/PreviewData.cpp:461
#, possible-c-format
msgid "Extruder %d"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2528
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2552
msgid "Layer height limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2557
msgid "Position (for multi-extruder printers)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2563
msgid "Only lift Z"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2576
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2584
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2765
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2767
msgid "Firmware Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3096
#, possible-c-format
msgid "Default preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3097
#, possible-c-format
msgid "Preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3114
msgid "has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3117
msgid "is not compatible with printer"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3118
msgid "is not compatible with print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3120
msgid "and it has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3124
msgid "Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3215
msgid "%1% - Copy"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3238
msgid "The supplied name is empty. It can't be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3243
msgid "Cannot overwrite a system profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3247
msgid "Cannot overwrite an external profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3273
msgid "remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3273
msgid "delete"
msgstr ""

#. TRN  remove/delete
#: src/slic3r/GUI/Tab.cpp:3275
msgid "Are you sure you want to %1% the selected preset?"
msgstr ""

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3278
msgid "%1% Preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3404
msgid "LOCKED LOCK"
msgstr ""

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3406
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3408
msgid "UNLOCKED LOCK"
msgstr ""

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3410
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3415
msgid "WHITE BULLET"
msgstr ""

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3417
msgid ""
"for the left button: \tindicates a non-system (or non-default) preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3420
msgid "BACK ARROW"
msgstr ""

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3422
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3432
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3434
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3437
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3440
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3442
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3448
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3449
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3455
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3456
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#. TRN Preset
#: src/slic3r/GUI/Tab.cpp:3569
#, possible-c-format
msgid "Save %s as:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3613
msgid "the following suffix is not allowed:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3617
msgid "The supplied name is not available."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3630
msgid "Material"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3632 src/slic3r/GUI/Tab.cpp:3723
#: src/slic3r/GUI/wxExtensions.cpp:482
msgid "Layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3731
msgid "Support head"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3736
msgid "Support pillar"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3747
msgid "Connection of the support sticks and junctions"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3752
msgid "Automatic generation"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:328 src/slic3r/GUI/Tab.hpp:428
msgid "Print Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:353
msgid "Filament Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:389
msgid "Printer Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:413
msgid "Material Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:440
msgid "Save preset"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
msgid "Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
#, possible-c-format
msgid "New version of %s is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "Current version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:47
msgid "New version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:55
msgid "Changelog && Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:62 src/slic3r/GUI/UpdateDialogs.cpp:127
msgid "Open changelog page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:67
msgid "Open download page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:73
msgid "Don't notify about new releases any more"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:91 src/slic3r/GUI/UpdateDialogs.cpp:207
msgid "Configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:91
msgid "Configuration update is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:94
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:115
msgid "Comment:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
#, possible-c-format
msgid "%s incompatibility"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:152
#, possible-c-format
msgid "%s configuration is incompatible"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:157
#, possible-c-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s.\n"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:166
#, possible-c-format
msgid "This %s version: %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:171
msgid "Incompatible bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:187
#, possible-c-format
msgid "Exit %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:190
msgid "Re-configure"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:211
#, possible-c-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:227
msgid "For more information please visit our wiki page:"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:14
msgid "Ramming customization"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:40
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:82
msgid "Total ramming time"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:84
msgid "Total rammed volume"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:88
msgid "Ramming line width"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:90
msgid "Ramming line spacing"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:141
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:225
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:226
msgid "Extruder changed to"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:234
msgid "unloaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:235
msgid "loaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:240
msgid "Tool #"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:247
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:248
msgid "Volume to purge (mm³) when the filament is being"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:262
msgid "From"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:327
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:339
msgid "Show simplified settings"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:339
msgid "Show advanced settings"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:471
msgid "Instances"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:475 src/slic3r/GUI/wxExtensions.cpp:619
#, possible-c-format
msgid "Instance %d"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:509
msgid "Range"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:2729
msgid "One layer mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:2730
msgid "Add/Del color change"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:2731
msgid "Discard all color changes"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:2991
#, possible-c-format
msgid "Switch to the %s mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:2992
#, possible-c-format
msgid "Current mode is %s"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:51
msgid "Connection to Duet works correctly."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:56
msgid "Could not connect to Duet"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154
msgid "Unknown error occured"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:148
msgid "Wrong password"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:151
msgid "Could not get resources to create a new connection"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:70
#, possible-c-format
msgid "Mismatched type of print host: %s"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:85
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:91
msgid "Could not connect to OctoPrint"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:91
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:196
msgid "Connection to Prusa SL1 works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:201
msgid "Could not connect to Prusa SLA"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:614
#, possible-c-format
msgid "requires min. %s and max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:619
#, possible-c-format
msgid "requires min. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:621
#, possible-c-format
msgid "requires max. %s"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Loading repaired model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model..."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:368
msgid "Export of a temporary 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:383
msgid "Import of the repaired 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Repaired 3MF file does not contain any object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:387
msgid "Repaired 3MF file contains more than one object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:389
msgid "Repaired 3MF file does not contain any volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:391
msgid "Repaired 3MF file contains more than one volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Model repair finished"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:406
msgid "Model repair canceled"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:423
msgid "Model repaired successfully"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:423
#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model Repair by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model repair failed: \n"
msgstr ""

#: src/libslic3r/Zipper.cpp:32
msgid "undefined error"
msgstr ""

#: src/libslic3r/Zipper.cpp:34
msgid "too many files"
msgstr ""

#: src/libslic3r/Zipper.cpp:36
msgid "file too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:38
msgid "unsupported method"
msgstr ""

#: src/libslic3r/Zipper.cpp:40
msgid "unsupported encryption"
msgstr ""

#: src/libslic3r/Zipper.cpp:42
msgid "unsupported feature"
msgstr ""

#: src/libslic3r/Zipper.cpp:44
msgid "failed finding central directory"
msgstr ""

#: src/libslic3r/Zipper.cpp:46
msgid "not a ZIP archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:48
msgid "invalid header or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:50
msgid "unsupported multidisk archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:52
msgid "decompression failed or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:54
msgid "compression failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:56
msgid "unexpected decompressed size"
msgstr ""

#: src/libslic3r/Zipper.cpp:58
msgid "CRC-32 check failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:60
msgid "unsupported central directory size"
msgstr ""

#: src/libslic3r/Zipper.cpp:62
msgid "allocation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:64
msgid "file open failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:66
msgid "file create failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:68
msgid "file write failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:70
msgid "file read failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:72
msgid "file close failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:74
msgid "file seek failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:76
msgid "file stat failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:78
msgid "invalid parameter"
msgstr ""

#: src/libslic3r/Zipper.cpp:80
msgid "invalid filename"
msgstr ""

#: src/libslic3r/Zipper.cpp:82
msgid "buffer too small"
msgstr ""

#: src/libslic3r/Zipper.cpp:84
msgid "internal error"
msgstr ""

#: src/libslic3r/Zipper.cpp:86
msgid "file not found"
msgstr ""

#: src/libslic3r/Zipper.cpp:88
msgid "archive is too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:90
msgid "validation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:92
msgid "write calledback failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:102
msgid "Error with zip archive"
msgstr ""

#: src/libslic3r/Print.cpp:1112
msgid "All objects are outside of the print volume."
msgstr ""

#: src/libslic3r/Print.cpp:1139
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""

#: src/libslic3r/Print.cpp:1154
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""

#: src/libslic3r/Print.cpp:1164
msgid "The Spiral Vase option can only be used when printing a single object."
msgstr ""

#: src/libslic3r/Print.cpp:1171
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""

#: src/libslic3r/Print.cpp:1184
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1189
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:1191
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""

#: src/libslic3r/Print.cpp:1212
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""

#: src/libslic3r/Print.cpp:1214
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""

#: src/libslic3r/Print.cpp:1216
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""

#: src/libslic3r/Print.cpp:1218
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""

#: src/libslic3r/Print.cpp:1246
msgid ""
"The Wipe tower is only supported if all objects have the same layer height "
"profile"
msgstr ""

#: src/libslic3r/Print.cpp:1256
msgid "The supplied settings will cause an empty print."
msgstr ""

#: src/libslic3r/Print.cpp:1273
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""

#: src/libslic3r/Print.cpp:1282
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1285
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1296
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1304
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""

#: src/libslic3r/Print.cpp:1308
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""

#: src/libslic3r/Print.cpp:1330
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1335
msgid "Layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1490
msgid "Infilling layers"
msgstr ""

#: src/libslic3r/Print.cpp:1498
msgid "Generating skirt"
msgstr ""

#: src/libslic3r/Print.cpp:1506
msgid "Generating brim"
msgstr ""

#: src/libslic3r/Print.cpp:1534
msgid "Exporting G-code"
msgstr ""

#: src/libslic3r/Print.cpp:1538
msgid "Generating G-code"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:64
msgid "Slicing model"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:65 src/libslic3r/SLAPrint.cpp:903
msgid "Generating support points"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:66
msgid "Generating support tree"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:67
msgid "Generating pad"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:68
msgid "Slicing supports"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:85
msgid "Merging slices and calculating statistics"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:86
msgid "Rasterizing layers"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:666
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:681
msgid ""
"Elevation is too low for object. Use the \"Pad around obect\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:688
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:700
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:707
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:791
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:986 src/libslic3r/SLAPrint.cpp:996
#: src/libslic3r/SLAPrint.cpp:1037
msgid "Visualizing supports"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:1569
msgid "Slicing done"
msgstr ""

#: src/libslic3r/PrintBase.cpp:71
msgid "Failed processing of the output_filename_format template."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
msgid "Printer technology"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:51
msgid "Bed shape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:56
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:61
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:68
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:75
msgid "Max print height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:76
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:82
msgid "Slice gap closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:84
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:92
msgid "Hostname, IP or URL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:93
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:99
msgid "API Key / Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:100
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:106
msgid "HTTPS CA File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:107
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:121
msgid "Avoid crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:122
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:129 src/libslic3r/PrintConfig.cpp:2027
msgid "Other layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:130
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:132
msgid "Bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:139
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:149
msgid "Between objects G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:150
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:161
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:162
msgid "Bottom solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:167
msgid "Bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:168
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:170 src/libslic3r/PrintConfig.cpp:313
#: src/libslic3r/PrintConfig.cpp:840 src/libslic3r/PrintConfig.cpp:961
#: src/libslic3r/PrintConfig.cpp:1130 src/libslic3r/PrintConfig.cpp:1183
#: src/libslic3r/PrintConfig.cpp:1194 src/libslic3r/PrintConfig.cpp:1383
msgid "mm/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:176
msgid "Bridging angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:178
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:181 src/libslic3r/PrintConfig.cpp:758
#: src/libslic3r/PrintConfig.cpp:1619 src/libslic3r/PrintConfig.cpp:1629
#: src/libslic3r/PrintConfig.cpp:1858 src/libslic3r/PrintConfig.cpp:2012
#: src/libslic3r/PrintConfig.cpp:2197 src/libslic3r/PrintConfig.cpp:2614
#: src/libslic3r/PrintConfig.cpp:2725
msgid "°"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:187
msgid "Bridges fan speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:188
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:189 src/libslic3r/PrintConfig.cpp:770
#: src/libslic3r/PrintConfig.cpp:1203 src/libslic3r/PrintConfig.cpp:1266
#: src/libslic3r/PrintConfig.cpp:1511 src/libslic3r/PrintConfig.cpp:2366
#: src/libslic3r/PrintConfig.cpp:2655
msgid "%"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:196
msgid "Bridge flow ratio"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:198
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:208
msgid "Bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:210
msgid "Speed for printing bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:211 src/libslic3r/PrintConfig.cpp:592
#: src/libslic3r/PrintConfig.cpp:600 src/libslic3r/PrintConfig.cpp:609
#: src/libslic3r/PrintConfig.cpp:617 src/libslic3r/PrintConfig.cpp:644
#: src/libslic3r/PrintConfig.cpp:663 src/libslic3r/PrintConfig.cpp:899
#: src/libslic3r/PrintConfig.cpp:1026 src/libslic3r/PrintConfig.cpp:1112
#: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:1161
#: src/libslic3r/PrintConfig.cpp:1172 src/libslic3r/PrintConfig.cpp:1225
#: src/libslic3r/PrintConfig.cpp:1284 src/libslic3r/PrintConfig.cpp:1412
#: src/libslic3r/PrintConfig.cpp:1586 src/libslic3r/PrintConfig.cpp:1595
#: src/libslic3r/PrintConfig.cpp:1991 src/libslic3r/PrintConfig.cpp:2104
msgid "mm/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:218
msgid "Brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:219
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:226
msgid "Clip multi-part objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:227
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:234
msgid "Colorprint height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:235
msgid "Heights at which a filament change is to occur."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:245
msgid "Compatible printers condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:246
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:260
msgid "Compatible print profiles condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:261
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:278
msgid "Complete individual objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:279
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:287
msgid "Enable auto cooling"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:288
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:293
msgid "Cooling tube position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:294
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:301
msgid "Cooling tube length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:302
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:310
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:319
msgid "Default filament profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:320
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:326
msgid "Default print profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:327 src/libslic3r/PrintConfig.cpp:2479
#: src/libslic3r/PrintConfig.cpp:2490
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:333
msgid "Disable fan for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:334
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:336 src/libslic3r/PrintConfig.cpp:971
#: src/libslic3r/PrintConfig.cpp:1484 src/libslic3r/PrintConfig.cpp:1669
#: src/libslic3r/PrintConfig.cpp:1730 src/libslic3r/PrintConfig.cpp:1894
#: src/libslic3r/PrintConfig.cpp:1939
msgid "layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:343
msgid "Don't support bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:345
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:351
msgid "Distance between copies"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:352
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:359
msgid "Elephant foot compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:361
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:370
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:380
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:391
msgid "Ensure vertical shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:393
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:399
msgid "Top fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:401
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:409 src/libslic3r/PrintConfig.cpp:821
#: src/libslic3r/PrintConfig.cpp:1972
msgid "Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:410 src/libslic3r/PrintConfig.cpp:827
msgid "Concentric"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:411 src/libslic3r/PrintConfig.cpp:831
msgid "Hilbert Curve"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:412 src/libslic3r/PrintConfig.cpp:832
msgid "Archimedean Chords"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:413 src/libslic3r/PrintConfig.cpp:833
msgid "Octagram Spiral"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:419
msgid "Bottom fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:421
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:430 src/libslic3r/PrintConfig.cpp:440
msgid "External perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:432
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:435 src/libslic3r/PrintConfig.cpp:543
#: src/libslic3r/PrintConfig.cpp:860 src/libslic3r/PrintConfig.cpp:872
#: src/libslic3r/PrintConfig.cpp:992 src/libslic3r/PrintConfig.cpp:1017
#: src/libslic3r/PrintConfig.cpp:1403 src/libslic3r/PrintConfig.cpp:1741
#: src/libslic3r/PrintConfig.cpp:1847 src/libslic3r/PrintConfig.cpp:1915
#: src/libslic3r/PrintConfig.cpp:2074
msgid "mm or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:442
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:881
#: src/libslic3r/PrintConfig.cpp:1700 src/libslic3r/PrintConfig.cpp:1751
#: src/libslic3r/PrintConfig.cpp:1958 src/libslic3r/PrintConfig.cpp:2086
msgid "mm/s or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:452
msgid "External perimeters first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:454
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:460
msgid "Extra perimeters if needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:462
#, possible-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:472
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:484
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:494
msgid "Radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:495
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:505
msgid "Extruder Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:506 src/libslic3r/PrintConfig.cpp:566
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:512
msgid "Extruder offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:513
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:522
msgid "Extrusion axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:523
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:528
msgid "Extrusion multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:529
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:537
msgid "Default extrusion width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:539
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:548
msgid "Keep fan always on"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:549
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:554
msgid "Enable fan if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:555
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:557 src/libslic3r/PrintConfig.cpp:1687
msgid "approximate seconds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:565
msgid "Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:571
msgid "Filament notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:572
msgid "You can put your notes regarding the filament here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:580 src/libslic3r/PrintConfig.cpp:1231
msgid "Max volumetric speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:581
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:590
msgid "Loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:591
msgid "Speed used for loading the filament on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:598
msgid "Loading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:599
msgid "Speed used at the very beginning of loading phase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:606
msgid "Unloading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:607
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:615
msgid "Unloading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:616
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:623
msgid "Delay after unloading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:624
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:633
msgid "Number of cooling moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:634
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:642
msgid "Speed of the first cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:643
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:650
msgid "Minimal purge on wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:651
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:655
msgid "mm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:661
msgid "Speed of the last cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:662
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:669
msgid "Filament load time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:670
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:677
msgid "Ramming parameters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:678
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:684
msgid "Filament unload time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:685
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:693
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:700
msgid "Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:701
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:704
msgid "g/cm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:709
msgid "Filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:710
msgid "The filament material type for use in custom G-codes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:736
msgid "Soluble material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:737
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:743
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:744
msgid "money/kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:753
msgid "Fill angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:755
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:767
msgid "Fill density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:769
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:804
msgid "Fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:806
msgid "Fill pattern for general low-density infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:822
msgid "Grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:823
msgid "Triangles"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:824
msgid "Stars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:825
msgid "Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:826
msgid "Line"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:828 src/libslic3r/PrintConfig.cpp:1974
msgid "Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:829
msgid "3D Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:830
msgid "Gyroid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:837 src/libslic3r/PrintConfig.cpp:846
#: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:887
msgid "First layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:838
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:847
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:856
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:866
msgid "First layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:868
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:877
msgid "First layer speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:878
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:888
msgid ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:897
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:905
msgid "Verbose G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:906
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:913
msgid "G-code flavor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:914
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:937
msgid "No extrusion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:942
msgid "Label objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:943
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:950
msgid "High extruder current on filament swap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:951
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:959
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:967
msgid "Combine infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:969
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:972
msgid "Combine infill every n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:978
msgid "Infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:980
msgid "The extruder to use when printing infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:988
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:997
msgid "Infill before perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:998
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1003
msgid "Only infill where needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1005
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1012
msgid "Infill/perimeters overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1014
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1025
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1033
msgid "Inherits profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1034
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1047
msgid "Interface shells"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1048
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1057
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1068
msgid "Supports remaining times"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1069
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1077
msgid "Supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1078
msgid "The firmware supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1102
msgid "Maximum feedrate X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1103
msgid "Maximum feedrate Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1104
msgid "Maximum feedrate Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1105
msgid "Maximum feedrate E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1108
msgid "Maximum feedrate of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1109
msgid "Maximum feedrate of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1110
msgid "Maximum feedrate of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1111
msgid "Maximum feedrate of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1120
msgid "Maximum acceleration X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1121
msgid "Maximum acceleration Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1122
msgid "Maximum acceleration Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1123
msgid "Maximum acceleration E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1126
msgid "Maximum acceleration of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1127
msgid "Maximum acceleration of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1128
msgid "Maximum acceleration of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1129
msgid "Maximum acceleration of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1138
msgid "Maximum jerk X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1139
msgid "Maximum jerk Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1140
msgid "Maximum jerk Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1141
msgid "Maximum jerk E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1144
msgid "Maximum jerk of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1145
msgid "Maximum jerk of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1146
msgid "Maximum jerk of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1147
msgid "Maximum jerk of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1158
msgid "Minimum feedrate when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1160
msgid "Minimum feedrate when extruding (M205 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1169
msgid "Minimum travel feedrate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1171
msgid "Minimum travel feedrate (M205 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1180
msgid "Maximum acceleration when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1182
msgid "Maximum acceleration when extruding (M204 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1191
msgid "Maximum acceleration when retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1193
msgid "Maximum acceleration when retracting (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1201 src/libslic3r/PrintConfig.cpp:1210
msgid "Max"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1202
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1211
#, possible-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1221
msgid "Max print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1222
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1232
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1241
msgid "Max volumetric slope positive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1242 src/libslic3r/PrintConfig.cpp:1253
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1246 src/libslic3r/PrintConfig.cpp:1257
msgid "mm³/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1252
msgid "Max volumetric slope negative"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1264 src/libslic3r/PrintConfig.cpp:1273
msgid "Min"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1265
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1274
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1282
msgid "Min print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1283
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1290
msgid "Minimal filament extrusion length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1291
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1300
msgid "Configuration notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1301
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1311
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1316
msgid "Host Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1317
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1328
msgid "Only retract when crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1329
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1336
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1343
msgid "Output filename format"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1344
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1353
msgid "Detect bridging perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1355
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1361
msgid "Filament parking position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1362
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1370
msgid "Extra loading distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1371
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1379 src/libslic3r/PrintConfig.cpp:1397
#: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1419
msgid "Perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1380
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1388
msgid "Perimeter extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1390
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1399
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1411
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1421
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1425
msgid "(minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1433
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1445
msgid "Printer type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1446
msgid "Type of the printer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1451
msgid "Printer notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1452
msgid "You can put your notes regarding the printer here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1460
msgid "Printer vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1461
msgid "Name of the printer vendor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1466
msgid "Printer variant"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1467
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1480
msgid "Raft layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1482
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1490
msgid "Resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1491
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1501
msgid "Minimum travel after retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1502
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1508
msgid "Retract amount before wipe"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1509
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1516
msgid "Retract on layer change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1517
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1522 src/libslic3r/PrintConfig.cpp:1530
msgid "Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1523
msgid "Retraction Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1524
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1526 src/libslic3r/PrintConfig.cpp:1535
msgid "mm (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1531
msgid "Retraction Length (Toolchange)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1532
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1540
msgid "Lift Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1541
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1548
msgid "Above Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1549
msgid "Only lift Z above"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1550
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1557
msgid "Below Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1558
msgid "Only lift Z below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1559
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1567 src/libslic3r/PrintConfig.cpp:1575
msgid "Extra length on restart"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1568
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1576
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1584
msgid "Retraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1585
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1591 src/libslic3r/PrintConfig.cpp:1592
msgid "Deretraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1593
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1600
msgid "Seam position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1602
msgid "Position of perimeters starting points."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1608
msgid "Random"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1609
msgid "Nearest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1610
msgid "Aligned"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1618
msgid "Direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1620
msgid "Preferred direction of the seam"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1621
msgid "Seam preferred direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1628
msgid "Jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1630
msgid "Seam preferred direction jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1631
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1641
msgid "USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1648
msgid "Serial port speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1649
msgid "Speed (baud) of USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1658
msgid "Distance from object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1659
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1666
msgid "Skirt height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1667
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1674
msgid "Loops (minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1675
msgid "Skirt Loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1676
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1684
msgid "Slow down if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1685
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1695
msgid "Small perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1697
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1707
msgid "Solid infill threshold area"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1709
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1710
msgid "mm²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1716
msgid "Solid infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1718
msgid "The extruder to use when printing solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1724
msgid "Solid infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1726
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1738
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1748
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1760
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1766
msgid "Spiral vase"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1767
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1775
msgid "Temperature variation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1776
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1786
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1801
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1817
msgid "Single Extruder Multi Material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1818
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1823
msgid "Prime all printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1824
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1829
msgid "Generate support material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1831
msgid "Enable support material generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1835
msgid "Auto generated supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1837
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1843
msgid "XY separation between an object and its support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1845
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1855
msgid "Pattern angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1857
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1867 src/libslic3r/PrintConfig.cpp:2563
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1873
msgid "Contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1875
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1882
msgid "0 (soluble)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1883
msgid "0.2 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1888
msgid "Enforce support for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1890
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1895
msgid "Enforce support for the first n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1901
msgid "Support material/raft/skirt extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1903
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1912
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1920
msgid "Interface loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1922
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1927
msgid "Support material/raft interface extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1929
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1936
msgid "Interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1938
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1945
msgid "Interface pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1947
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1956
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1965
msgid "Pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1967
msgid "Pattern used to generate support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1973
msgid "Rectilinear grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1979
msgid "Pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1981
msgid "Spacing between support material lines."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1990
msgid "Speed for printing support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1997
msgid "Synchronize with object layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1999
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2005
msgid "Overhang threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2007
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2019
msgid "With sheath around the support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2021
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2028
msgid ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2036
msgid "Detect thin walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2038
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2044
msgid "Threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2045
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2057
msgid ""
"This custom code is inserted at every extruder change. If you don't leave "
"this empty, you are expected to take care of the toolchange yourself - "
"PrusaSlicer will not output any other G-code to change the filament. You can "
"use placeholder variables for all Slic3r settings as well as "
"[previous_extruder] and [next_extruder], so e.g. the standard toolchange "
"command can be scripted as T[next_extruder]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2070
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2081
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2096
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2097
msgid "Top solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2103
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2111
msgid "Use firmware retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2112
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2118
msgid "Use relative E distances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2119
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2125
msgid "Use volumetric E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2126
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2136
msgid "Enable variable layer height feature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2137
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2143
msgid "Wipe while retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2144
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2151
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2157
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2158
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2164
msgid "Purging volumes - matrix"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2165
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2174
msgid "Position X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2175
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2181
msgid "Position Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2182
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2189
msgid "Width of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2195
msgid "Wipe tower rotation angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2196
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2203
msgid "Wipe into this object's infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2204
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2211
msgid "Wipe into this object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2212
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2218
msgid "Maximal bridging distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2219
msgid "Maximal distance between supports on sparse infill sections."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2225
msgid "XY Size Compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2227
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2235
msgid "Z offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2236
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2294
msgid "Display width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2295
msgid "Width of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2300
msgid "Display height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2301
msgid "Height of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2306
msgid "Number of pixels in"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2308
msgid "Number of pixels in X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2314
msgid "Number of pixels in Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2319
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2320
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2321
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2326
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2327
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2328
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2333
msgid "Display orientation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2334
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2340
msgid "Landscape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2341
msgid "Portrait"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2346
msgid "Fast"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2347
msgid "Fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2348
msgid "Time of the fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2355
msgid "Slow"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2356
msgid "Slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2357
msgid "Time of the slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2364
msgid "Area fill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2365
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2372 src/libslic3r/PrintConfig.cpp:2373
#: src/libslic3r/PrintConfig.cpp:2374
msgid "Printer scaling correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2380 src/libslic3r/PrintConfig.cpp:2381
msgid "Printer absolute correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2382
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2388 src/libslic3r/PrintConfig.cpp:2389
msgid "Printer gamma correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2390
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2401 src/libslic3r/PrintConfig.cpp:2402
msgid "Initial layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2408
msgid "Faded layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2409
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2416 src/libslic3r/PrintConfig.cpp:2417
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2425
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2432 src/libslic3r/PrintConfig.cpp:2433
msgid "Exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2439 src/libslic3r/PrintConfig.cpp:2440
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2447 src/libslic3r/PrintConfig.cpp:2448
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2455 src/libslic3r/PrintConfig.cpp:2456
msgid "Initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2462 src/libslic3r/PrintConfig.cpp:2463
msgid "Correction for expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2469
msgid "SLA print material notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2470
msgid "You can put your notes regarding the SLA print material here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2478 src/libslic3r/PrintConfig.cpp:2489
msgid "Default SLA material profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2500
msgid "Generate supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2502
msgid "Generate supports for the models"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2507
msgid "Support head front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2509
msgid "Diameter of the pointing side of the head"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2516
msgid "Support head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2518
msgid "How much the pinhead has to penetrate the model surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2525
msgid "Support head width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2527
msgid "Width from the back sphere center to the front sphere center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2535
msgid "Support pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2537
msgid "Diameter in mm of the support pillars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2545
msgid "Support pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2546
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2554
msgid "Zig-Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2555
msgid "Cross"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2556
msgid "Dynamic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2568
msgid "Pillar widening factor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2570
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2579
msgid "Support base diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2581
msgid "Diameter in mm of the pillar base"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2589
msgid "Support base height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2591
msgid "The height of the pillar base cone"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2598
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2601
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2611
msgid "Critical angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2613
msgid "The default angle for connecting support sticks and junctions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2621
msgid "Max bridge length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2623
msgid "The max length of a bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2630
msgid "Max pillar linking distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2632
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2640
msgid "Object elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2642
msgid ""
"How much the supports should lift up the supported object. If this value is "
"zero, the bottom of the model geometry will be considered as part of the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2654
msgid "This is a relative measure of support points density."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2660
msgid "Minimal distance of the support points"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2662
msgid "No support points will be placed closer than this threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2668
msgid "Use pad"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2670
msgid "Add a pad underneath the supported model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2675
msgid "Pad wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2677
msgid "The thickness of the pad and its optional cavity walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2685
msgid "Pad wall height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2686
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2699
msgid "Max merge distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2701
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2721
msgid "Pad wall slope"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2723
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2732
msgid "Pad around object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2734
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2739
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2741
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2750
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2752
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2759
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2761
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2768
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2771
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3131
msgid "Export OBJ"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3132
msgid "Export the model(s) as OBJ."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3143
msgid "Export SLA"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3144
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3149
msgid "Export 3MF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3150
msgid "Export the model(s) as 3MF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3154
msgid "Export AMF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3155
msgid "Export the model(s) as AMF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3159
msgid "Export STL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3160
msgid "Export the model(s) as STL."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3165
msgid "Slice the model and export toolpaths as G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3170
msgid "Slice"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3171
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3176
msgid "Help"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3177
msgid "Show this help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3182
msgid "Help (FFF options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3183
msgid "Show the full list of print/G-code configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3187
msgid "Help (SLA options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3188
msgid "Show the full list of SLA print configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3192
msgid "Output Model Info"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3193
msgid "Write information about the model to the console."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3197
msgid "Save config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3198
msgid "Save configuration to the specified file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3208
msgid "Align XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3209
msgid "Align the model to the given point."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3214
msgid "Cut model at the given Z."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3235
msgid "Center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3236
msgid "Center the print around the given center."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3240
msgid "Don't arrange"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3241
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3244
msgid "Duplicate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3245
msgid "Multiply copies by this factor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3249
msgid "Duplicate by grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3250
msgid "Multiply copies by creating a grid."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3253
msgid "Merge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3254
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3259
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3263
msgid "Rotation angle around the Z axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3267
msgid "Rotate around X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3268
msgid "Rotation angle around the X axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3272
msgid "Rotate around Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3273
msgid "Rotation angle around the Y axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3278
msgid "Scaling factor or percentage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3283
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3286
msgid "Scale to Fit"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3287
msgid "Scale to fit the given volume."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3296
msgid "Ignore non-existent config files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3297
msgid "Do not fail if a file supplied to --load does not exist."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3300
msgid "Load config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3301
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3304
msgid "Output File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3305
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3315
msgid "Data directory"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3316
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3319
msgid "Logging level"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3320
msgid ""
"Messages with severity lower or eqal to the loglevel will be printed out. 0:"
"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3325
msgid "Render with a software renderer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3326
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""

#: src/libslic3r/PrintObject.cpp:110
msgid "Processing triangulated mesh"
msgstr ""

#: src/libslic3r/PrintObject.cpp:141
msgid "Generating perimeters"
msgstr ""

#: src/libslic3r/PrintObject.cpp:251
msgid "Preparing infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:391
msgid "Generating support material"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:160
msgid "Mixed"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:380
msgid "Height (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:382
msgid "Width (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:384
msgid "Speed (mm/s)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:386
msgid "Volumetric flow rate (mm3/s)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:477
msgid "Default print color"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:484
#, possible-c-format
msgid "up to %.2f mm"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:488
#, possible-c-format
msgid "above %.2f mm"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:493
#, possible-c-format
msgid "%.2f - %.2f mm"
msgstr ""