# Print profiles for the Prusa Research printers. [vendor] # Vendor name will be shown by the Config Wizard. name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. config_version = 1.1.1-alpha4 # Where to get the updates from? config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/ changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1% # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install. #TODO: One day we may differentiate variants of the nozzles / hot ends, #for example by the melt zone size, or whether the nozzle is hardened. # Printer model name will be shown by the installation wizard. [printer_model:MINI] name = Original Prusa MINI variants = 0.4; 0.25; 0.6 technology = FFF family = MINI bed_model = mini_bed.stl bed_texture = mini.svg default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI [printer_model:MK3S] name = Original Prusa i3 MK3S variants = 0.4; 0.25; 0.6 technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA [printer_model:MK3] name = Original Prusa i3 MK3 variants = 0.4; 0.25; 0.6 technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA [printer_model:MK3SMMU2S] name = Original Prusa i3 MK3S MMU2S variants = 0.4; 0.25; 0.6 technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2 [printer_model:MK3MMU2] name = Original Prusa i3 MK3 MMU2 variants = 0.4; 0.25; 0.6 technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2 [printer_model:MK2.5S] name = Original Prusa i3 MK2.5S variants = 0.4; 0.25; 0.6 technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA [printer_model:MK2.5] name = Original Prusa i3 MK2.5 variants = 0.4; 0.25; 0.6 technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA [printer_model:MK2.5SMMU2S] name = Original Prusa i3 MK2.5S MMU2S variants = 0.4; 0.25; 0.6 technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2 [printer_model:MK2.5MMU2] name = Original Prusa i3 MK2.5 MMU2 variants = 0.4; 0.25; 0.6 technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2 [printer_model:MK2S] name = Original Prusa i3 MK2S variants = 0.4; 0.25; 0.6 technology = FFF family = MK2 bed_model = mk2_bed.stl bed_texture = mk2.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA [printer_model:MK2SMM] name = Original Prusa i3 MK2S MMU1 variants = 0.4; 0.6 technology = FFF family = MK2 bed_model = mk2_bed.stl bed_texture = mk2.svg default_materials = Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA [printer_model:SL1] name = Original Prusa SL1 variants = default technology = SLA family = SL1 bed_model = sl1_bed.stl bed_texture = sl1.svg default_materials = Prusa Orange Tough @0.05 # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. # Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle. # All other print presets will derive from the *common* print preset. [print:*common*] avoid_crossing_perimeters = 0 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.8 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 compatible_printers = complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeters_first = 0 external_perimeter_extrusion_width = 0.45 extra_perimeters = 0 extruder_clearance_height = 25 extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = cubic first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 gap_fill_speed = 40 gcode_comments = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% interface_shells = 0 max_print_speed = 100 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = overhangs = 0 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode perimeters = 2 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 post_process = print_settings_id = raft_layers = 0 resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 1 skirts = 1 skirt_distance = 2 skirt_height = 3 small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_enforce_layers = 0 support_material_contact_distance = 0.1 support_material_interface_contact_loops = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 55 support_material_with_sheath = 0 support_material_xy_spacing = 50% thin_walls = 0 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 40 travel_speed = 180 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 140 xy_size_compensation = 0 top_solid_min_thickness = 0.6 bottom_solid_min_thickness = 0.5 [print:*MK3*] fill_pattern = grid single_extruder_multi_material_priming = 0 travel_speed = 180 wipe_tower_x = 170 wipe_tower_y = 125 [print:*MK306*] fill_pattern = gyroid fill_density = 15% single_extruder_multi_material_priming = 0 travel_speed = 180 wipe_tower_x = 170 wipe_tower_y = 125 ## MINI [print:*MINI*] fill_pattern = grid travel_speed = 150 wipe_tower = 0 default_acceleration = 1250 first_layer_acceleration = 800 infill_acceleration = 1000 bridge_acceleration = 1000 support_material_speed = 40 max_print_speed = 150 extruder_clearance_height = 20 extruder_clearance_radius = 35 # Print parameters common to a 0.25mm diameter nozzle. [print:*0.25nozzle*] elefant_foot_compensation = 0 external_perimeter_extrusion_width = 0.25 extrusion_width = 0.25 first_layer_extrusion_width = 0.3 infill_extrusion_width = 0.25 perimeter_extrusion_width = 0.25 solid_infill_extrusion_width = 0.25 top_infill_extrusion_width = 0.25 support_material_extrusion_width = 0.2 support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_spacing = 1 support_material_xy_spacing = 150% output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode [print:*0.25nozzleMK3*] elefant_foot_compensation = 0 external_perimeter_extrusion_width = 0.25 extrusion_width = 0.25 first_layer_extrusion_width = 0.3 infill_extrusion_width = 0.25 perimeter_extrusion_width = 0.25 solid_infill_extrusion_width = 0.25 top_infill_extrusion_width = 0.25 support_material_extrusion_width = 0.2 support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_spacing = 1 support_material_xy_spacing = 150% perimeter_speed = 30 external_perimeter_speed = 20 small_perimeter_speed = 20 infill_speed = 45 solid_infill_speed = 45 top_solid_infill_speed = 30 support_material_speed = 40 bridge_speed = 20 gap_fill_speed = 30 perimeter_acceleration = 500 infill_acceleration = 1000 bridge_acceleration = 500 first_layer_acceleration = 500 default_acceleration = 1000 max_print_speed = 80 perimeters = 3 fill_pattern = grid fill_density = 20% output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode [print:*0.25nozzleMINI*] elefant_foot_compensation = 0 external_perimeter_extrusion_width = 0.25 extrusion_width = 0.25 first_layer_extrusion_width = 0.3 infill_extrusion_width = 0.25 perimeter_extrusion_width = 0.25 solid_infill_extrusion_width = 0.25 top_infill_extrusion_width = 0.25 support_material_extrusion_width = 0.2 support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_spacing = 1 support_material_xy_spacing = 150% perimeter_speed = 30 external_perimeter_speed = 20 small_perimeter_speed = 20 infill_speed = 40 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_speed = 40 bridge_speed = 20 gap_fill_speed = 30 perimeter_acceleration = 500 infill_acceleration = 800 bridge_acceleration = 500 first_layer_acceleration = 500 max_print_speed = 80 perimeters = 3 fill_pattern = grid fill_density = 20% output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode # Print parameters common to a 0.6mm diameter nozzle. [print:*0.6nozzle*] external_perimeter_extrusion_width = 0.61 extrusion_width = 0.67 first_layer_extrusion_width = 0.65 infill_extrusion_width = 0.7 perimeter_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.55 support_material_contact_distance = 0.15 support_material_xy_spacing = 80% output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode [print:*0.6nozzleMK3*] external_perimeter_extrusion_width = 0.65 extrusion_width = 0.65 first_layer_extrusion_width = 0.65 infill_extrusion_width = 0.65 perimeter_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.55 bridge_flow_ratio = 0.95 bridge_speed = 25 support_material_contact_distance = 0.15 support_material_xy_spacing = 80% output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode [print:*0.6nozzleMINI*] external_perimeter_extrusion_width = 0.65 extrusion_width = 0.65 first_layer_extrusion_width = 0.65 infill_extrusion_width = 0.68 perimeter_extrusion_width = 0.65 solid_infill_extrusion_width = 0.68 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.55 bridge_flow_ratio = 0.95 bridge_speed = 25 support_material_contact_distance = 0.15 support_material_xy_spacing = 80% fill_pattern = gyroid fill_density = 15% travel_speed = 150 perimeter_acceleration = 800 infill_acceleration = 1000 bridge_acceleration = 1000 first_layer_acceleration = 1000 default_acceleration = 1250 support_material_speed = 40 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode [print:*soluble_support*] overhangs = 1 skirts = 0 support_material = 1 support_material_contact_distance = 0 support_material_extruder = 4 support_material_extrusion_width = 0.45 support_material_interface_extruder = 4 support_material_interface_spacing = 0.1 support_material_synchronize_layers = 1 support_material_threshold = 80 support_material_with_sheath = 1 wipe_tower_bridging = 6 support_material_interface_speed = 80% # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.05mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.05mm*] inherits = *common* bottom_solid_layers = 10 bridge_acceleration = 300 bridge_flow_ratio = 0.7 default_acceleration = 1000 external_perimeter_speed = 20 fill_density = 20% first_layer_acceleration = 500 gap_fill_speed = 20 infill_acceleration = 800 infill_speed = 30 max_print_speed = 80 small_perimeter_speed = 20 solid_infill_speed = 30 support_material_extrusion_width = 0.3 support_material_spacing = 1.5 layer_height = 0.05 perimeter_acceleration = 300 perimeter_speed = 30 perimeters = 3 support_material_speed = 30 top_solid_infill_speed = 20 top_solid_layers = 15 [print:0.05mm ULTRADETAIL] inherits = *0.05mm* # alias = 0.05mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 infill_extrusion_width = 0.5 # MK3 # [print:0.05mm ULTRADETAIL @MK3] inherits = *0.05mm*; *MK3* # alias = 0.05mm ULTRADETAIL fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material top_infill_extrusion_width = 0.4 # MK2 # [print:0.05mm ULTRADETAIL @0.25 nozzle] inherits = *0.05mm*; *0.25nozzle* # alias = 0.05mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 fill_density = 20% infill_speed = 20 max_print_speed = 100 perimeter_speed = 20 small_perimeter_speed = 15 solid_infill_speed = 20 support_material_speed = 20 # MK3 # [print:0.05mm ULTRADETAIL @0.25 nozzle MK3] inherits = *0.05mm*; *0.25nozzle*; *MK3* # alias = 0.05mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 fill_pattern = grid fill_density = 20% # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.07mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.07mm*] inherits = *common* bottom_solid_layers = 8 bridge_acceleration = 300 bridge_flow_ratio = 0.7 bridge_speed = 20 default_acceleration = 1000 external_perimeter_speed = 20 fill_density = 15% first_layer_acceleration = 500 gap_fill_speed = 20 infill_acceleration = 800 infill_speed = 40 max_print_speed = 80 small_perimeter_speed = 20 solid_infill_speed = 40 support_material_extrusion_width = 0.3 support_material_spacing = 1.5 layer_height = 0.07 perimeter_acceleration = 300 perimeter_speed = 30 perimeters = 3 support_material_speed = 40 top_solid_infill_speed = 30 top_solid_layers = 11 # MK3 # [print:0.07mm ULTRADETAIL @MK3] inherits = *0.07mm*; *MK3* # alias = 0.07mm ULTRADETAIL fill_pattern = gyroid compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material top_infill_extrusion_width = 0.4 [print:0.07mm ULTRADETAIL @0.25 nozzle MK3] inherits = *0.07mm*; *0.25nozzle*; *MK3* # alias = 0.07mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 infill_speed = 30 solid_infill_speed = 30 support_material_speed = 30 top_solid_infill_speed = 20 fill_pattern = grid fill_density = 20% # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.10mm ---XXX # XXXXXXXXXXXXXXXXXXXX # MK2 # [print:*0.10mm*] inherits = *common* bottom_solid_layers = 7 bridge_flow_ratio = 0.7 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 layer_height = 0.1 perimeter_acceleration = 800 top_solid_layers = 9 # MK2 # [print:0.10mm DETAIL] inherits = *0.10mm* # alias = 0.10mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 perimeter_speed = 50 solid_infill_speed = 50 # MK3 # [print:0.10mm DETAIL @MK3] inherits = *0.10mm*; *MK3* # alias = 0.10mm DETAIL bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material external_perimeter_speed = 25 infill_acceleration = 1000 infill_speed = 80 max_print_speed = 200 perimeter_speed = 45 solid_infill_speed = 80 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% # MK2 # [print:0.10mm DETAIL @0.25 nozzle] inherits = *0.10mm*; *0.25nozzle* # alias = 0.10mm DETAIL bridge_acceleration = 600 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 external_perimeter_speed = 20 infill_acceleration = 1000 infill_speed = 40 perimeter_acceleration = 600 perimeter_speed = 25 small_perimeter_speed = 15 solid_infill_speed = 40 top_solid_infill_speed = 30 # MK3 # [print:0.10mm DETAIL @0.25 nozzle MK3] inherits = *0.10mm*; *0.25nozzleMK3*; *MK3* # alias = 0.10mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.15mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.15mm*] inherits = *common* bottom_solid_layers = 5 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.15 perimeter_acceleration = 800 perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 7 # MK2 # [print:0.15mm 100mms Linear Advance] inherits = *0.15mm* bridge_flow_ratio = 0.95 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 50 infill_speed = 100 max_print_speed = 150 perimeter_speed = 60 small_perimeter_speed = 30 solid_infill_speed = 100 support_material_speed = 60 top_solid_infill_speed = 70 # MK2 # [print:0.15mm OPTIMAL] inherits = *0.15mm* # alias = 0.15mm OPTIMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 top_infill_extrusion_width = 0.45 # MK2 # [print:0.15mm OPTIMAL @0.25 nozzle] inherits = *0.15mm*; *0.25nozzle* # alias = 0.15mm OPTIMAL bridge_acceleration = 600 bridge_flow_ratio = 0.7 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 external_perimeter_speed = 20 infill_acceleration = 1000 infill_speed = 40 perimeter_acceleration = 600 perimeter_speed = 25 small_perimeter_speed = 15 solid_infill_speed = 40 top_solid_infill_speed = 30 # MK2 # [print:0.15mm OPTIMAL @0.6 nozzle] inherits = *0.15mm*; *0.6nozzle* # alias = 0.15mm OPTIMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 # MK3 # [print:0.15mm QUALITY @MK3] inherits = *0.15mm*; *MK3* # alias = 0.15mm QUALITY bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 25 infill_acceleration = 1000 infill_speed = 80 max_print_speed = 200 perimeter_speed = 45 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% [print:0.15mm SPEED @MK3] inherits = *0.15mm*; *MK3* # alias = 0.15mm SPEED bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 200 max_print_speed = 200 perimeter_speed = 60 solid_infill_speed = 200 top_solid_infill_speed = 50 # MK3 MMU # [print:0.15mm SOLUBLE FULL @MK3] inherits = 0.15mm SPEED @MK3; *soluble_support* # alias = 0.15mm SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 support_material_interface_extruder = 5 perimeter_speed = 40 solid_infill_speed = 40 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 # MK3 MMU # [print:0.15mm SOLUBLE INTERFACE @MK3] inherits = 0.15mm SOLUBLE FULL @MK3 # alias = 0.15mm SOLUBLE INTERFACE notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 # MK2 MMU # [print:0.15mm OPTIMAL SOLUBLE FULL] inherits = *0.15mm*; *soluble_support* # alias = 0.15mm OPTIMAL SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 external_perimeter_speed = 25 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder perimeter_speed = 40 solid_infill_speed = 40 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 # MK2 MMU # [print:0.15mm OPTIMAL SOLUBLE INTERFACE] inherits = 0.15mm OPTIMAL SOLUBLE FULL # alias = 0.15mm OPTIMAL SOLUBLE INTERFACE notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 80% # MK3 # [print:0.15mm QUALITY @0.25 nozzle MK3] inherits = *0.15mm*; *0.25nozzleMK3*; *MK3* # alias = 0.15mm QUALITY compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% # MK3 # [print:0.15mm DETAIL @0.6 nozzle MK3] inherits = *0.15mm*; *0.6nozzleMK3*; *MK306* # alias = 0.15mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.20mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.20mm*] inherits = *common* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.2 perimeter_acceleration = 800 perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 5 # MK2 # [print:0.20mm 100mms Linear Advance] inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 50 infill_speed = 100 max_print_speed = 150 perimeter_speed = 60 small_perimeter_speed = 30 solid_infill_speed = 100 support_material_speed = 60 top_solid_infill_speed = 70 # MK3 # [print:0.20mm QUALITY @MK3] inherits = *0.20mm*; *MK3* # alias = 0.20mm QUALITY bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 25 infill_acceleration = 1000 infill_speed = 80 max_print_speed = 200 perimeter_speed = 45 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% [print:0.20mm SPEED @MK3] inherits = *0.20mm*; *MK3* # alias = 0.20mm SPEED bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 200 max_print_speed = 200 perimeter_speed = 60 solid_infill_speed = 200 top_solid_infill_speed = 50 # MK3 MMU # [print:0.20mm SOLUBLE FULL @MK3] inherits = 0.20mm SPEED @MK3; *soluble_support* # alias = 0.20mm SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 support_material_interface_extruder = 5 perimeter_speed = 40 solid_infill_speed = 40 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 # MK3 MMU # [print:0.20mm SOLUBLE INTERFACE @MK3] inherits = 0.20mm SOLUBLE FULL @MK3 # alias = 0.20mm SOLUBLE INTERFACE notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 # MK2 # [print:0.20mm NORMAL] inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 # MK2 # [print:0.20mm NORMAL @0.6 nozzle] inherits = *0.20mm*; *0.6nozzle* # alias = 0.20mm NORMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 # MK2 MMU # [print:0.20mm NORMAL SOLUBLE FULL] inherits = *0.20mm*; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 external_perimeter_speed = 30 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder perimeter_speed = 40 solid_infill_speed = 40 top_solid_infill_speed = 30 # MK2 MMU # [print:0.20mm NORMAL SOLUBLE INTERFACE] inherits = 0.20mm NORMAL SOLUBLE FULL notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 80% # MK3 # [print:0.20mm DETAIL @0.6 nozzle MK3] inherits = *0.20mm*; *0.6nozzleMK3*; *MK306* # alias = 0.20mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.25mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.25mm*] inherits = *common* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 external_perimeter_speed = 40 perimeter_acceleration = 800 layer_height = 0.25 perimeter_speed = 50 top_solid_layers = 4 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.30mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.30mm*] inherits = *common* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.3 perimeter_acceleration = 800 perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 4 [print:0.30mm QUALITY @0.6 nozzle MK3] inherits = *0.30mm*; *0.6nozzleMK3*; *MK306* # alias = 0.30mm QUALITY compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 [print:0.30mm SOLUBLE FULL @0.6 nozzle MK3] inherits = 0.30mm QUALITY @0.6 nozzle MK3; *soluble_support* # alias = 0.30mm SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 support_material_interface_extruder = 5 support_material_speed = 40 perimeter_speed = 40 solid_infill_speed = 40 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.6 top_solid_infill_speed = 30 support_material_xy_spacing = 80% [print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3] inherits = 0.30mm SOLUBLE FULL @0.6 nozzle MK3 # alias = 0.30mm SOLUBLE INTERFACE notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 [print:0.30mm DRAFT @MK3] inherits = *0.30mm*; *MK3* # alias = 0.30mm DRAFT bottom_solid_layers = 3 bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 85 max_print_speed = 200 perimeter_speed = 50 small_perimeter_speed = 30 solid_infill_speed = 80 top_solid_infill_speed = 40 support_material_speed = 45 external_perimeter_extrusion_width = 0.6 extrusion_width = 0.5 first_layer_extrusion_width = 0.42 infill_extrusion_width = 0.5 perimeter_extrusion_width = 0.5 solid_infill_extrusion_width = 0.5 top_infill_extrusion_width = 0.45 support_material_extrusion_width = 0.38 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.35mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.35mm*] inherits = *common* bottom_solid_layers = 3 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 40 first_layer_extrusion_width = 0.75 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.35 perimeter_acceleration = 800 perimeter_extrusion_width = 0.65 perimeter_speed = 50 solid_infill_extrusion_width = 0.65 solid_infill_speed = 60 top_solid_infill_speed = 50 top_solid_layers = 4 # MK2 # [print:0.35mm FAST] inherits = *0.35mm* bridge_flow_ratio = 0.95 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 first_layer_extrusion_width = 0.42 perimeter_extrusion_width = 0.43 solid_infill_extrusion_width = 0.7 top_infill_extrusion_width = 0.43 support_material_extrusion_width = 0.37 # MK2 # [print:0.35mm FAST @0.6 nozzle] inherits = *0.35mm*; *0.6nozzle* # alias = 0.35mm FAST compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 # MK2 MMU # [print:0.35mm FAST sol full @0.6 nozzle] inherits = *0.35mm*; *0.6nozzle*; *soluble_support* # alias = 0.35mm FAST SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 30 notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder perimeter_speed = 40 support_material_speed = 40 support_material_interface_layers = 2 support_material_xy_spacing = 120% top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.6 # MK2 MMU # [print:0.35mm FAST sol int @0.6 nozzle] inherits = 0.35mm FAST sol full @0.6 nozzle # alias = 0.35mm FAST SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 150% # MK3 # [print:0.35mm SPEED @0.6 nozzle MK3] inherits = *0.35mm*; *0.6nozzleMK3*; *MK306* # alias = 0.35mm SPEED compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 infill_extrusion_width = 0.68 solid_infill_extrusion_width = 0.68 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.40mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.40mm*] inherits = *common* bottom_solid_layers = 3 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 40 first_layer_extrusion_width = 0.65 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.4 perimeter_acceleration = 800 perimeter_extrusion_width = 0.65 perimeter_speed = 50 solid_infill_extrusion_width = 0.65 solid_infill_speed = 60 top_solid_infill_speed = 40 top_solid_layers = 4 # MK3 # [print:0.40mm DRAFT @0.6 nozzle MK3] inherits = *0.40mm*; *0.6nozzleMK3*; *MK306* # alias = 0.40mm DRAFT compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.7 perimeter_extrusion_width = 0.7 infill_extrusion_width = 0.7 solid_infill_extrusion_width = 0.7 # XXXXXXXXXXXXXXXXXXXXXX # XXX----- MK2.5 ----XXX # XXXXXXXXXXXXXXXXXXXXXX # MK2.5 # [print:0.15mm 100mms Linear Advance @MK2.5] inherits = 0.15mm 100mms Linear Advance compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 # [print:0.15mm OPTIMAL @MK2.5] inherits = 0.15mm OPTIMAL # alias = 0.15mm OPTIMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 # [print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE FULL # alias = 0.15mm OPTIMAL SOLUBLE FULL support_material_extruder = 5 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 # MK2.5 MMU2 # [print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE # alias = 0.15mm OPTIMAL SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 # MK2.5 # [print:0.20mm 100mms Linear Advance @MK2.5] inherits = 0.20mm 100mms Linear Advance # alias = 0.20mm 100mms Linear Advance compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 # [print:0.20mm NORMAL @MK2.5] inherits = 0.20mm NORMAL # alias = 0.20mm NORMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 # [print:0.20mm NORMAL SOLUBLE FULL @MK2.5] inherits = 0.20mm NORMAL SOLUBLE FULL # alias = 0.20mm NORMAL SOLUBLE FULL support_material_extruder = 5 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 # [print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5] inherits = 0.20mm NORMAL SOLUBLE INTERFACE # alias = 0.20mm NORMAL SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 # MK2.5 # [print:0.35mm FAST @MK2.5] inherits = 0.35mm FAST # alias = 0.35mm FAST compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 0.6 nozzle # [print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5] inherits = *0.35mm*; *0.6nozzle*; *soluble_support* # alias = 0.35mm SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 30 notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder perimeter_speed = 40 support_material_speed = 40 support_material_interface_layers = 2 support_material_xy_spacing = 80% support_material_extruder = 5 support_material_interface_extruder = 5 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.6 [print:0.35mm SOLUBLE INTERFACE @0.6 nozzle MK2.5] inherits = 0.35mm SOLUBLE FULL @0.6 nozzle MK2.5 # alias = 0.35mm SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 80% ## MINI print profiles # 0.4mm nozzle [print:0.05mm ULTRADETAIL @MINI] inherits = *0.05mm*; *MINI* # alias = 0.05mm ULTRADETAIL fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 top_infill_extrusion_width = 0.4 small_perimeter_speed = 15 perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 support_material_xy_spacing = 60% [print:0.07mm ULTRADETAIL @MINI] inherits = *0.07mm*; *MINI* # alias = 0.07mm ULTRADETAIL fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 top_infill_extrusion_width = 0.4 small_perimeter_speed = 15 perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 support_material_xy_spacing = 60% [print:0.10mm DETAIL @MINI] inherits = *0.10mm*; *MINI* # alias = 0.10mm DETAIL bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 external_perimeter_speed = 30 infill_speed = 80 solid_infill_speed = 80 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% perimeters = 3 bridge_acceleration = 1000 support_material_xy_spacing = 60% [print:0.15mm QUALITY @MINI] inherits = *0.15mm*; *MINI* # alias = 0.15mm QUALITY bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 external_perimeter_speed = 30 infill_speed = 80 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% bridge_flow_ratio = 0.85 support_material_xy_spacing = 60% [print:0.15mm SPEED @MINI] inherits = *0.15mm*; *MINI* # alias = 0.15mm SPEED bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 50 external_perimeter_speed = 40 infill_speed = 140 solid_infill_speed = 140 top_solid_infill_speed = 40 bridge_flow_ratio = 0.85 support_material_xy_spacing = 60% [print:0.20mm QUALITY @MINI] inherits = *0.20mm*; *MINI* # alias = 0.20mm QUALITY bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 external_perimeter_speed = 30 infill_speed = 80 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% support_material_xy_spacing = 60% [print:0.20mm SPEED @MINI] inherits = *0.20mm*; *MINI* # alias = 0.20mm SPEED bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 50 external_perimeter_speed = 40 infill_speed = 140 max_print_speed = 150 solid_infill_speed = 140 top_solid_infill_speed = 40 support_material_xy_spacing = 60% [print:0.25mm DRAFT @MINI] inherits = *0.25mm*; *MINI* # alias = 0.25mm DRAFT bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 40 infill_speed = 110 perimeter_speed = 55 small_perimeter_speed = 25 solid_infill_speed = 100 top_solid_infill_speed = 45 first_layer_extrusion_width = 0.42 infill_extrusion_width = 0.45 solid_infill_extrusion_width = 0.45 top_infill_extrusion_width = 0.4 support_material_xy_spacing = 60% # 0.25mm nozzle [print:0.05mm ULTRADETAIL @0.25 nozzle MINI] inherits = *0.05mm*; *0.25nozzle*; *MINI* # alias = 0.05mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% [print:0.07mm ULTRADETAIL @0.25 nozzle MINI] inherits = *0.07mm*; *0.25nozzle*; *MINI* # alias = 0.07mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 infill_speed = 30 solid_infill_speed = 30 support_material_speed = 30 top_solid_infill_speed = 20 fill_pattern = grid fill_density = 20% [print:0.10mm DETAIL @0.25 nozzle MINI] inherits = *0.10mm*; *0.25nozzleMINI*; *MINI* # alias = 0.10mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% [print:0.15mm QUALITY @0.25 nozzle MINI] inherits = *0.15mm*; *0.25nozzleMINI*; *MINI* # alias = 0.15mm QUALITY compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% # 0.6mm nozzle [print:0.15mm DETAIL @0.6 nozzle MINI] inherits = *0.15mm*; *0.6nozzleMINI* # alias = 0.15mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 infill_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 [print:0.20mm DETAIL @0.6 nozzle MINI] inherits = *0.20mm*; *0.6nozzleMINI* # alias = 0.20mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 infill_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 [print:0.30mm QUALITY @0.6 nozzle MINI] inherits = *0.30mm*; *0.6nozzleMINI* # alias = 0.30mm QUALITY compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 65 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 65 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 [print:0.35mm SPEED @0.6 nozzle MINI] inherits = *0.35mm*; *0.6nozzleMINI* # alias = 0.35mm SPEED compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 60 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 60 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 [print:0.40mm DRAFT @0.6 nozzle MINI] inherits = *0.40mm*; *0.6nozzleMINI* # alias = 0.40mm DRAFT compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 50 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 50 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 infill_extrusion_width = 0.68 solid_infill_extrusion_width = 0.68 # XXXXXXxxXXXXXXXXXXXXXX # XXX--- filament ---XXX # XXXXXXXXxxXXXXXXXXXXXX [filament:*common*] cooling = 1 compatible_printers = # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_toolchange_delay = 0 filament_cooling_moves = 4 filament_cooling_initial_speed = 2.2 filament_cooling_final_speed = 3.4 filament_load_time = 0 filament_unload_time = 0 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_minimal_purge_on_wipe_tower = 15 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 filament_notes = "" filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode" [filament:*PLA*] inherits = *common* bed_temperature = 60 bridge_fan_speed = 100 disable_fan_first_layers = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #FF8000 filament_max_volumetric_speed = 15 filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 min_fan_speed = 100 temperature = 210 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode" [filament:*PET*] inherits = *common* bed_temperature = 90 bridge_fan_speed = 50 disable_fan_first_layers = 3 fan_always_on = 1 fan_below_layer_time = 20 filament_colour = #FF8000 filament_max_volumetric_speed = 8 filament_type = PETG first_layer_bed_temperature = 85 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}24{else}45{endif} ; Filament gcode" temperature = 240 filament_retract_length = 1.4 filament_retract_lift = 0.2 compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:*PET06*] inherits = *PET* compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) filament_max_volumetric_speed = 15 [filament:*PETMMU1*] inherits = *PET* filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = 0.2 compatible_printers_condition = printer_model=="MK2SMM" [filament:*PETMINI*] inherits = *PET* filament_retract_length = nil filament_retract_speed = 40 filament_deretract_speed = 25 filament_retract_lift = nil filament_retract_before_travel = 1 filament_max_volumetric_speed = 7 compatible_printers_condition = printer_model=="MINI" start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.2{endif} ; Filament gcode" [filament:*PETMINI06*] inherits = *PET* filament_retract_length = nil filament_retract_speed = 40 filament_deretract_speed = 25 filament_retract_lift = nil filament_retract_before_travel = 1 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.6 start_filament_gcode = "M900 K0.12 ; Filament gcode" filament_max_volumetric_speed = 13 [filament:*ABSMINI*] inherits = *ABS* bed_temperature = 100 filament_retract_length = 2.7 filament_retract_speed = nil filament_deretract_speed = nil filament_retract_lift = nil filament_retract_before_travel = 3 filament_wipe = 0 filament_max_volumetric_speed = 10 compatible_printers_condition = printer_model=="MINI" start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.2{endif} ; Filament gcode" [filament:*FLEXMINI*] inherits = *FLEX* first_layer_temperature = 245 temperature = 245 filament_retract_length = 4 filament_retract_speed = 40 filament_deretract_speed = 15 filament_retract_lift = 0 filament_retract_before_travel = 7 filament_wipe = 0 bridge_fan_speed = 80 fan_always_on = 1 cooling = 0 max_fan_speed = 50 min_fan_speed = 50 filament_max_volumetric_speed = 1.35 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" disable_fan_first_layers = 4 extrusion_multiplier = 1.15 filament_density = 1.22 filament_colour = #F2F200 start_filament_gcode = "M900 K0 ; Filament gcode" [filament:*ABS*] inherits = *common* bed_temperature = 110 bridge_fan_speed = 30 cooling = 0 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #3A80CA filament_max_volumetric_speed = 11 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_type = ABS first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 20 temperature = 255 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode" compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:*FLEX*] inherits = *common* bed_temperature = 50 bridge_fan_speed = 80 # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) cooling = 0 disable_fan_first_layers = 3 extrusion_multiplier = 1.15 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #008000 filament_max_volumetric_speed = 1.5 filament_type = FLEX first_layer_bed_temperature = 50 first_layer_temperature = 240 max_fan_speed = 90 min_fan_speed = 70 start_filament_gcode = "M900 K0"; Filament gcode" temperature = 240 filament_retract_length = 0.8 filament_deretract_speed = 25 filament_retract_lift = 0 filament_wipe = 0 [filament:ColorFabb bronzeFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 72.89 filament_density = 3.9 filament_colour = #804040 filament_max_volumetric_speed = 9 [filament:ColorFabb steelFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 72.89 filament_density = 3.13 filament_colour = #808080 filament_max_volumetric_speed = 8 [filament:ColorFabb copperFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 72.89 filament_density = 3.9 filament_colour = #82603E filament_max_volumetric_speed = 9 [filament:ColorFabb HT] inherits = *PET* filament_vendor = ColorFabb bed_temperature = 110 bridge_fan_speed = 30 cooling = 1 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 10 filament_cost = 65.66 filament_density = 1.18 first_layer_bed_temperature = 105 first_layer_temperature = 270 max_fan_speed = 20 min_fan_speed = 10 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 [filament:ColorFabb PLA-PHA] inherits = *PLA* filament_vendor = ColorFabb filament_cost = 52.46 filament_density = 1.24 [filament:ColorFabb woodFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.1 filament_cost = 58.30 filament_density = 1.15 filament_colour = #dfc287 filament_max_volumetric_speed = 9 first_layer_temperature = 200 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 200 filament_retract_lift = 0.2 [filament:ColorFabb corkFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.1 filament_cost = 58.30 filament_density = 1.18 filament_colour = #634d33 filament_max_volumetric_speed = 6 first_layer_temperature = 220 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 220 filament_retract_lift = 0.2 [filament:ColorFabb XT] inherits = *PET* filament_vendor = ColorFabb filament_cost = 58.30 filament_density = 1.27 first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 270 [filament:ColorFabb XT-CF20] inherits = *PET* filament_vendor = ColorFabb extrusion_multiplier = 1.2 filament_cost = 72.89 filament_density = 1.35 filament_colour = #804040 filament_max_volumetric_speed = 1 first_layer_bed_temperature = 90 first_layer_temperature = 260 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 260 filament_retract_length = nil filament_retract_lift = 0.2 [filament:ColorFabb nGen] inherits = *PET* filament_vendor = ColorFabb filament_cost = 52.46 filament_density = 1.2 bridge_fan_speed = 40 fan_always_on = 0 fan_below_layer_time = 10 filament_type = NGEN first_layer_temperature = 240 max_fan_speed = 35 min_fan_speed = 20 [filament:ColorFabb nGen flex] inherits = *FLEX* filament_vendor = ColorFabb filament_cost = 58.30 filament_density = 1 bed_temperature = 85 bridge_fan_speed = 40 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_below_layer_time = 10 filament_max_volumetric_speed = 5 first_layer_bed_temperature = 85 first_layer_temperature = 260 max_fan_speed = 35 min_fan_speed = 20 temperature = 260 filament_retract_length = nil filament_retract_lift = 0 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) [filament:E3D Edge] inherits = *PET* filament_vendor = E3D filament_cost = 56.9 filament_density = 1.26 filament_type = EDGE compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:E3D PC-ABS] inherits = *ABS* filament_vendor = E3D filament_cost = 0 filament_type = PC filament_density = 1.05 first_layer_temperature = 270 temperature = 270 [filament:Fillamentum PLA] inherits = *PLA* filament_vendor = Fillamentum filament_cost = 25.4 filament_density = 1.24 [filament:Fillamentum ABS] inherits = *ABS* filament_vendor = Fillamentum filament_cost = 32.4 filament_density = 1.04 first_layer_temperature = 240 temperature = 240 [filament:Fillamentum ASA] inherits = *ABS* filament_vendor = Fillamentum filament_cost = 38.7 filament_density = 1.07 fan_always_on = 1 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 min_print_speed = 15 slowdown_below_layer_time = 15 first_layer_temperature = 265 temperature = 265 filament_type = ASA [filament:Prusament ASA] inherits = *ABS* filament_vendor = Prusa Polymers filament_cost = 35.28 filament_density = 1.07 fan_always_on = 1 first_layer_temperature = 260 first_layer_bed_temperature = 105 temperature = 260 bed_temperature = 110 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 min_print_speed = 15 slowdown_below_layer_time = 15 disable_fan_first_layers = 4 filament_type = ASA filament_colour = #FFF2EC start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}12{else}20{endif} ; Filament gcode" [filament:Fillamentum CPE] inherits = *PET* filament_vendor = Fillamentum filament_cost = 54.1 filament_density = 1.25 filament_type = CPE first_layer_bed_temperature = 90 first_layer_temperature = 275 max_fan_speed = 50 min_fan_speed = 50 temperature = 275 [filament:Fillamentum Timberfill] inherits = *PLA* filament_vendor = Fillamentum compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.1 filament_cost = 68 filament_density = 1.15 filament_colour = #804040 filament_max_volumetric_speed = 10 first_layer_temperature = 190 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 190 filament_retract_lift = 0.2 [filament:Smartfil Wood] inherits = *PLA* filament_vendor = Smart Materials 3D compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.1 filament_cost = 68 filament_density = 1.58 filament_colour = #804040 filament_max_volumetric_speed = 9 first_layer_temperature = 220 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 220 filament_retract_lift = 0.2 [filament:Generic ABS] inherits = *ABS* filament_vendor = Generic filament_cost = 27.82 filament_density = 1.04 [filament:Esun ABS] inherits = *ABS* filament_vendor = Esun filament_cost = 27.82 filament_density = 1.04 [filament:Hatchbox ABS] inherits = *ABS* filament_vendor = Hatchbox filament_cost = 27.82 filament_density = 1.04 [filament:Plasty Mladec ABS] inherits = *ABS* filament_vendor = Plasty Mladec filament_cost = 27.82 filament_density = 1.04 [filament:Generic PETG] inherits = *PET* filament_vendor = Generic filament_cost = 27.82 filament_density = 1.27 [filament:Plasty Mladec PETG] inherits = *PET* filament_vendor = Plasty Mladec filament_cost = 27.82 filament_density = 1.27 [filament:Generic PLA] inherits = *PLA* filament_vendor = Generic filament_cost = 25.4 filament_density = 1.24 filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" [filament:Generic FLEX] inherits = *FLEX* filament_vendor = Generic filament_cost = 82 filament_density = 1.22 filament_max_volumetric_speed = 1.2 filament_retract_length = 0 filament_retract_speed = nil filament_retract_lift = nil [filament:SainSmart TPU] inherits = *FLEX* filament_vendor = SainSmart fan_always_on = 1 filament_max_volumetric_speed = 2.5 extrusion_multiplier = 1.1 first_layer_temperature = 230 first_layer_bed_temperature = 50 temperature = 230 bed_temperature = 50 bridge_fan_speed = 100 max_fan_speed = 80 min_fan_speed = 80 filament_retract_before_travel = 3 filament_cost = 32.99 filament_density = 1.21 filament_retract_length = 1 filament_retract_speed = nil filament_deretract_speed = 25 filament_retract_lift = 0 filament_wipe = 0 disable_fan_first_layers = 3 min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 [filament:Filatech FilaFlex40] inherits = *FLEX* filament_vendor = Filatech fan_always_on = 1 filament_max_volumetric_speed = 2.5 extrusion_multiplier = 1.1 first_layer_temperature = 230 first_layer_bed_temperature = 50 temperature = 230 bed_temperature = 50 bridge_fan_speed = 100 max_fan_speed = 50 min_fan_speed = 50 filament_retract_before_travel = 3 filament_cost = 51.45 filament_density = 1.22 filament_retract_length = 2 filament_retract_speed = 50 filament_deretract_speed = 25 filament_retract_lift = 0 filament_wipe = 0 disable_fan_first_layers = 3 min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 [filament:Polymaker PC-Max] inherits = *ABS* filament_vendor = Polymaker filament_cost = 77.3 filament_density = 1.20 filament_type = PC bed_temperature = 115 filament_colour = #3A80CA first_layer_bed_temperature = 100 first_layer_temperature = 270 temperature = 270 bridge_fan_speed = 0 filament_max_volumetric_speed = 8 [filament:PrimaSelect PVA+] inherits = *PLA* filament_vendor = PrimaSelect filament_cost = 108 filament_density = 1.23 cooling = 0 fan_always_on = 0 filament_colour = #FFFFD7 filament_max_volumetric_speed = 3.8 filament_notes = "List of materials tested with standard PVA print settings:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'" filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_soluble = 1 filament_type = PVA first_layer_temperature = 195 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 195 [filament:Prusa ABS] inherits = *ABS* filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.08 filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS" [filament:*ABS MMU2*] inherits = Prusa ABS compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_cooling_final_speed = 50 filament_cooling_initial_speed = 10 filament_cooling_moves = 5 filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"; filament_loading_speed_start = 19 filament_load_time = 15 filament_unload_time = 12 filament_loading_speed = 14 filament_unloading_speed = 20 [filament:Generic ABS @MMU2] inherits = *ABS MMU2* # alias = Generic ABS filament_vendor = Generic [filament:Prusament ASA @MMU2] inherits = *ABS MMU2* # alias = Prusament ASA filament_vendor = Prusa Polymers filament_cost = 35.28 filament_density = 1.07 fan_always_on = 1 first_layer_temperature = 260 first_layer_bed_temperature = 105 temperature = 260 bed_temperature = 110 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 min_print_speed = 15 slowdown_below_layer_time = 15 disable_fan_first_layers = 4 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 filament_cooling_moves = 1 filament_type = ASA filament_colour = #FFF2EC start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}12{else}20{endif} ; Filament gcode" [filament:Prusa ABS @MMU2] inherits = *ABS MMU2* # alias = Prusa ABS filament_vendor = Made for Prusa [filament:Plasty Mladec ABS @MMU2] inherits = *ABS MMU2* filament_vendor = Plasty Mladec [filament:Prusa HIPS] inherits = *ABS* filament_vendor = Made for Prusa filament_cost = 27.3 filament_density = 1.04 bridge_fan_speed = 50 cooling = 1 extrusion_multiplier = 0.9 fan_always_on = 1 fan_below_layer_time = 10 filament_colour = #FFFFD7 filament_soluble = 1 filament_type = HIPS first_layer_temperature = 220 max_fan_speed = 20 min_fan_speed = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 220 [filament:Generic HIPS] inherits = *ABS* filament_vendor = Generic filament_cost = 27.3 filament_density = 1.04 bridge_fan_speed = 50 cooling = 1 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 10 filament_colour = #FFFFD7 filament_soluble = 1 filament_type = HIPS first_layer_temperature = 230 max_fan_speed = 20 min_fan_speed = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 230 [filament:Prusa PETG] inherits = *PET* filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standard PETG print settings:\n\nE3D Edge\nPlasty Mladec PETG" compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PETG] inherits = *PET* filament_vendor = Prusa Polymers first_layer_temperature = 240 temperature = 250 filament_cost = 24.99 filament_density = 1.27 filament_type = PETG compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusa PETG @0.6 nozzle] inherits = *PET06* # alias = Prusa PETG filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standard PETG print settings:\n\nE3D Edge\nPlasty Mladec PETG" [filament:Prusament PETG @0.6 nozzle] inherits = *PET06* filament_vendor = Prusa Polymers first_layer_temperature = 240 temperature = 250 filament_cost = 24.99 filament_density = 1.27 filament_type = PETG [filament:Plasty Mladec PETG @0.6 nozzle] inherits = *PET06* filament_vendor = Plasty Mladec first_layer_temperature = 240 temperature = 250 filament_cost = 24.99 filament_density = 1.27 filament_type = PETG [filament:*PET MMU2*] inherits = Prusa PETG compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 230 first_layer_temperature = 230 filament_cooling_final_speed = 1 filament_cooling_initial_speed = 2 filament_cooling_moves = 1 filament_load_time = 15 filament_loading_speed = 14 filament_notes = PET filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 120 filament_loading_speed_start = 19 filament_retract_length = 1.4 filament_retract_lift = 0.2 [filament:*PET MMU2 06*] inherits = *PET MMU2* compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 13 [filament:Generic PETG @MMU2] inherits = *PET MMU2* # alias = Generic PETG filament_vendor = Generic [filament:Plasty Mladec PETG @MMU2] inherits = *PET MMU2* filament_vendor = Plasty Mladec [filament:Prusa PETG @MMU2] inherits = *PET MMU2* # alias = Prusa PETG filament_vendor = Made for Prusa [filament:Prusament PETG @MMU2] inherits = *PET MMU2* filament_type = PETG # alias = Prusament PETG filament_vendor = Prusa Polymers [filament:Generic PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* # alias = Generic PETG filament_vendor = Generic [filament:Prusa PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* # alias = Prusa PETG filament_vendor = Made for Prusa [filament:Prusament PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* filament_type = PETG # alias = Prusament PETG filament_vendor = Prusa Polymers [filament:Plasty Mladec PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* filament_type = PETG # alias = Prusament PETG filament_vendor = Plasty Mladec [filament:Prusa PLA] inherits = *PLA* filament_vendor = Made for Prusa filament_cost = 25.4 filament_density = 1.24 [filament:Fiberlogy PLA] inherits = *PLA* filament_vendor = Fiberlogy filament_cost = 25.4 filament_density = 1.24 [filament:Plasty Mladec PLA] inherits = *PLA* filament_vendor = Plasty Mladec filament_cost = 25.4 filament_density = 1.24 [filament:AmazonBasics PLA] inherits = *PLA* filament_vendor = AmazonBasics filament_cost = 25.4 filament_density = 1.24 [filament:Hatchbox PLA] inherits = *PLA* filament_vendor = Hatchbox filament_cost = 25.4 filament_density = 1.24 [filament:Esun PLA] inherits = *PLA* filament_vendor = Esun filament_cost = 25.4 filament_density = 1.24 [filament:Das Filament PLA] inherits = *PLA* filament_vendor = Das Filament filament_cost = 25.4 filament_density = 1.24 [filament:EUMAKERS PLA] inherits = *PLA* filament_vendor = EUMAKERS filament_cost = 25.4 filament_density = 1.24 [filament:Floreon3D PLA] inherits = *PLA* filament_vendor = Floreon3D filament_cost = 25.4 filament_density = 1.24 [filament:Prusament PLA] inherits = *PLA* filament_vendor = Prusa Polymers temperature = 215 filament_cost = 24.99 filament_density = 1.24 filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" [filament:*PLA MMU2*] inherits = Prusa PLA compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 205 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 filament_cooling_moves = 1 filament_load_time = 15 filament_loading_speed = 14 filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 12 filament_unloading_speed = 20 filament_loading_speed_start = 19 filament_minimal_purge_on_wipe_tower = 15 filament_unloading_speed_start = 100 [filament:Generic PLA @MMU2] inherits = *PLA MMU2* filament_vendor = Generic [filament:Prusa PLA @MMU2] inherits = *PLA MMU2* filament_vendor = Made for Prusa [filament:Prusament PLA @MMU2] inherits = *PLA MMU2* filament_vendor = Prusa Polymers [filament:SemiFlex or Flexfill 98A] inherits = *FLEX* filament_vendor = Generic filament_cost = 82 filament_density = 1.22 filament_max_volumetric_speed = 1.35 [filament:Taulman Bridge] inherits = *common* filament_vendor = Taulman filament_cost = 40 filament_density = 1.13 bed_temperature = 90 bridge_fan_speed = 40 cooling = 0 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #DEE0E6 filament_max_volumetric_speed = 10 filament_soluble = 0 filament_type = NYLON first_layer_bed_temperature = 60 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 250 [filament:Taulman T-Glase] inherits = *PET* filament_vendor = Taulman filament_cost = 40 filament_density = 1.27 bridge_fan_speed = 40 cooling = 0 fan_always_on = 0 first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" [filament:Verbatim PLA] inherits = *PLA* filament_vendor = Verbatim filament_cost = 42.99 filament_density = 1.24 [filament:Verbatim BVOH] inherits = *common* filament_vendor = Verbatim filament_cost = 218 filament_density = 1.23 bed_temperature = 60 bridge_fan_speed = 100 cooling = 0 disable_fan_first_layers = 1 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #FFFFD7 filament_max_volumetric_speed = 4 filament_notes = "List of materials tested with standard PVA print settings:\n\nVerbatim BVOH" filament_soluble = 1 filament_type = PVA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 min_fan_speed = 100 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 210 [filament:Verbatim BVOH @MMU2] inherits = Verbatim BVOH filament_vendor = Verbatim compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 195 fan_always_on = 1 first_layer_temperature = 200 filament_cooling_final_speed = 1 filament_cooling_initial_speed = 2 filament_max_volumetric_speed = 4 filament_type = PVA filament_cooling_moves = 1 filament_load_time = 15 filament_loading_speed = 14 filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 100 filament_loading_speed_start = 19 [filament:PrimaSelect PVA+ @MMU2] inherits = *common* filament_vendor = PrimaSelect compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material bed_temperature = 60 bridge_fan_speed = 100 cooling = 0 disable_fan_first_layers = 1 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #FFFFD7 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 4 filament_cooling_moves = 2 filament_cost = 25.4 filament_density = 1.24 filament_diameter = 1.75 filament_load_time = 15 filament_loading_speed = 14 filament_loading_speed_start = 19 filament_max_volumetric_speed = 3.8 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "List of materials tested with standard PVA print settings:\n\nPrimaSelect PVA+" filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6" filament_soluble = 1 filament_toolchange_delay = 0 filament_type = PVA filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 100 first_layer_bed_temperature = 60 first_layer_temperature = 200 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 195 [filament:Verbatim PP] inherits = *common* filament_vendor = Verbatim filament_cost = 72 filament_density = 0.89 bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 2 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #DEE0E6 filament_max_volumetric_speed = 5 filament_notes = "List of materials tested with standard PLA print settings:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA" filament_type = PP first_layer_bed_temperature = 100 first_layer_temperature = 220 max_fan_speed = 100 min_fan_speed = 100 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 220 ## Filaments MMU1 [filament:ColorFabb HT @MMU1] inherits = *PETMMU1* filament_vendor = ColorFabb bed_temperature = 110 bridge_fan_speed = 30 cooling = 1 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 10 filament_cost = 58.66 filament_density = 1.18 first_layer_bed_temperature = 105 first_layer_temperature = 270 max_fan_speed = 20 min_fan_speed = 10 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 [filament:ColorFabb XT @MMU1] inherits = *PETMMU1* filament_vendor = ColorFabb filament_type = PETG filament_cost = 62.9 filament_density = 1.27 first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 270 [filament:ColorFabb XT-CF20 @MMU1] inherits = *PETMMU1* # alias = ColorFabb XT-CF20 filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MK2SMM" extrusion_multiplier = 1.2 filament_cost = 80.65 filament_density = 1.35 filament_colour = #804040 filament_max_volumetric_speed = 1 first_layer_bed_temperature = 90 first_layer_temperature = 260 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 260 [filament:ColorFabb nGen @MMU1] inherits = *PETMMU1* # alias = ColorFabb nGen filament_vendor = ColorFabb filament_cost = 21.2 filament_density = 1.2 bridge_fan_speed = 40 fan_always_on = 0 fan_below_layer_time = 10 filament_type = NGEN first_layer_temperature = 240 max_fan_speed = 35 min_fan_speed = 20 [filament:E3D Edge @MMU1] inherits = *PETMMU1* # alias = E3D Edge filament_vendor = E3D filament_cost = 56.9 filament_density = 1.26 filament_type = EDGE filament_notes = "List of manufacturers tested with standard PETG print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" [filament:Fillamentum CPE @MMU1] inherits = *PETMMU1* # alias = Fillamentum CPE filament_vendor = Fillamentum filament_cost = 54.1 filament_density = 1.25 filament_type = CPE first_layer_bed_temperature = 90 first_layer_temperature = 275 max_fan_speed = 50 min_fan_speed = 50 temperature = 275 [filament:Generic PETG @MMU1] inherits = *PETMMU1* # alias = Generic PETG filament_vendor = Generic filament_cost = 27.82 filament_density = 1.27 [filament:Plasty Mladec PETG @MMU1] inherits = *PETMMU1* # alias = Generic PETG filament_vendor = Plasty Mladec filament_cost = 27.82 filament_density = 1.27 [filament:Prusa PETG @MMU1] inherits = *PETMMU1* # alias = Prusa PETG filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standard PETG print settings:\n\nE3D Edge\nPlasty Mladec PETG" [filament:Prusament PETG @MMU1] inherits = *PETMMU1* # alias = Prusament PETG filament_vendor = Prusa Polymers first_layer_temperature = 240 temperature = 250 filament_cost = 24.99 filament_density = 1.27 filament_type = PETG [filament:Taulman T-Glase @MMU1] inherits = *PETMMU1* # alias = Taulman T-Glase filament_vendor = Taulman filament_cost = 40 filament_density = 1.27 bridge_fan_speed = 40 cooling = 0 fan_always_on = 0 first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" [filament:SemiFlex or Flexfill 98A @MMU1] inherits = *FLEX* filament_vendor = Generic filament_cost = 82 filament_density = 1.22 filament_max_volumetric_speed = 1.35 filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = nil compatible_printers_condition = printer_model=="MK2SMM" [filament:Generic FLEX @MMU1] inherits = *FLEX* # alias = Generic FLEX filament_vendor = Generic filament_cost = 82 filament_density = 1.22 filament_max_volumetric_speed = 1.2 filament_retract_length = 0 filament_retract_speed = nil filament_retract_lift = nil compatible_printers_condition = printer_model=="MK2SMM" ## Filaments MINI [filament:Generic PETG @MINI] inherits = Generic PETG; *PETMINI* filament_vendor = Generic # alias = Generic PETG filament_cost = 27.82 filament_density = 1.27 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Plasty Mladec PETG @MINI] inherits = Generic PETG; *PETMINI* filament_vendor = Plasty Mladec filament_cost = 27.82 filament_density = 1.27 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Generic ABS @MINI] inherits = Generic ABS; *ABSMINI* filament_vendor = Generic # alias = Generic ABS filament_cost = 27.82 filament_density = 1.08 [filament:Esun ABS @MINI] inherits = Generic ABS; *ABSMINI* filament_vendor = Esun filament_cost = 27.82 filament_density = 1.08 [filament:Hatchbox ABS @MINI] inherits = Generic ABS; *ABSMINI* filament_vendor = Hatchbox filament_cost = 27.82 filament_density = 1.08 [filament:Plasty Mladec ABS @MINI] inherits = Generic ABS; *ABSMINI* filament_vendor = Plasty Mladec filament_cost = 27.82 filament_density = 1.08 [filament:Prusament PETG @MINI] inherits = Prusament PETG; *PETMINI* filament_vendor = Prusa Polymers # alias = Prusament PETG first_layer_temperature = 240 temperature = 250 filament_density = 1.27 filament_cost = 24.99 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Prusament PETG @0.6 nozzle MINI] inherits = Prusament PETG; *PETMINI06* # alias = Prusament PETG first_layer_temperature = 240 temperature = 250 filament_density = 1.27 filament_cost = 24.99 [filament:Generic PETG @0.6 nozzle MINI] inherits = Generic PETG; *PETMINI06* # alias = Generic PETG [filament:Plasty Mladec PETG @0.6 nozzle MINI] inherits = Generic PETG; *PETMINI06* filament_vendor = Plasty Mladec # alias = Generic PETG [filament:Prusament ASA @MINI] inherits = Prusament ASA; *ABSMINI* # alias = Prusament ASA first_layer_temperature = 260 first_layer_bed_temperature = 100 temperature = 260 bed_temperature = 100 fan_always_on = 1 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 min_print_speed = 15 slowdown_below_layer_time = 15 disable_fan_first_layers = 4 filament_type = ASA filament_colour = #FFF2EC filament_cost = 35.28 filament_density = 1.07 [filament:Fillamentum Flexfill 98A @MINI] inherits = SemiFlex or Flexfill 98A; *FLEXMINI* # alias = Fillamentum Flexfill 98A filament_vendor = Fillamentum first_layer_temperature = 240 temperature = 240 filament_max_volumetric_speed = 1.35 [filament:Generic FLEX @MINI] inherits = SemiFlex or Flexfill 98A; *FLEXMINI* # alias = Semiflex or Flex 98A filament_vendor = Generic fan_always_on = 0 bridge_fan_speed = 80 first_layer_temperature = 240 temperature = 240 filament_retract_length = 3 filament_max_volumetric_speed = 1.35 [filament:AmazonBasics TPU @MINI] inherits = *FLEXMINI* # alias = AmazonBasics TPU filament_vendor = AmazonBasics filament_max_volumetric_speed = 1.5 first_layer_temperature = 235 first_layer_bed_temperature = 50 temperature = 235 bed_temperature = 50 bridge_fan_speed = 100 max_fan_speed = 80 min_fan_speed = 80 filament_retract_before_travel = 5 filament_cost = 19.99 filament_density = 1.21 [filament:SainSmart TPU @MINI] inherits = *FLEXMINI* # alias = SainSmart TPU filament_vendor = SainSmart filament_max_volumetric_speed = 1.8 first_layer_temperature = 235 first_layer_bed_temperature = 50 temperature = 235 bed_temperature = 50 bridge_fan_speed = 100 max_fan_speed = 80 min_fan_speed = 80 filament_retract_before_travel = 5 min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 filament_cost = 32.99 filament_density = 1.21 [filament:Filatech FilaFlex40 @MINI] inherits = *FLEXMINI* # alias = Filatech FilaFlex40 filament_vendor = Filatech filament_max_volumetric_speed = 1.8 fan_always_on = 1 first_layer_temperature = 240 first_layer_bed_temperature = 55 temperature = 240 bed_temperature = 55 filament_retract_length = 4 filament_retract_before_travel = 5 bridge_fan_speed = 80 max_fan_speed = 50 min_fan_speed = 50 min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 filament_cost = 51.45 [filament:Fillamentum Flexfill 92A @MINI] inherits = *FLEXMINI* # alias = Fillamentum Flexfill 92A filament_vendor = Fillamentum first_layer_temperature = 245 temperature = 245 filament_retract_length = 3 filament_retract_speed = 40 filament_deretract_speed = 15 filament_retract_lift = 0 filament_retract_before_travel = 7 filament_wipe = 0 filament_density = 1.20 filament_cost = 33.95 bridge_fan_speed = 70 fan_always_on = 1 cooling = 0 max_fan_speed = 50 min_fan_speed = 50 filament_max_volumetric_speed = 1.2 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" disable_fan_first_layers = 4 extrusion_multiplier = 1.2 start_filament_gcode = "M900 K0 ; Filament gcode" [filament:Fillamentum CPE @MINI] inherits = Fillamentum CPE; *PETMINI* # alias = Fillamentum CPE first_layer_temperature = 265 first_layer_bed_temperature = 90 temperature = 265 filament_type = CPE filament_cost = 54.1 filament_density = 1.25 [filament:ColorFabb nGen @MINI] inherits = ColorFabb nGen; *PETMINI* # alias = ColorFabb nGen filament_cost = 52.46 filament_density = 1.2 [filament:E3D PC-ABS @MINI] inherits = E3D PC-ABS; *ABSMINI* # alias = E3D PC-ABS filament_density = 1.05 filament_cost = 28.80 [filament:Fillamentum ABS @MINI] inherits = Fillamentum ABS; *ABSMINI* # alias = Fillamentum ABS filament_cost = 32.4 filament_density = 1.04 [filament:Fillamentum ASA @MINI] inherits = Fillamentum ASA; *ABSMINI* # alias = Fillamentum ASA first_layer_temperature = 255 first_layer_bed_temperature = 100 temperature = 255 bed_temperature = 100 fan_always_on = 1 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 min_print_speed = 15 slowdown_below_layer_time = 15 disable_fan_first_layers = 4 filament_type = ASA filament_colour = #FFF2EC filament_cost = 38.7 filament_density = 1.07 [filament:Polymaker PC-Max @MINI] inherits = Polymaker PC-Max; *ABSMINI* # alias = Polymaker PC-Max filament_type = PC filament_max_volumetric_speed = 7 bed_temperature = 100 filament_colour = #3A80CA first_layer_bed_temperature = 100 first_layer_temperature = 270 temperature = 270 bridge_fan_speed = 0 filament_cost = 77.3 filament_density = 1.20 [filament:Prusa ABS @MINI] inherits = *ABSMINI* # alias = Prusa ABS filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.08 [filament:Generic HIPS @MINI] inherits = *ABSMINI* # alias = Generic HIPS filament_vendor = Generic filament_cost = 27.3 filament_density = 1.04 bridge_fan_speed = 50 cooling = 1 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 10 filament_colour = #FFFFD7 filament_soluble = 1 filament_type = HIPS first_layer_temperature = 230 max_fan_speed = 20 min_fan_speed = 20 temperature = 230 [filament:ColorFabb HT @MINI] inherits = *PETMINI* # alias = ColorFabb HT filament_vendor = ColorFabb bed_temperature = 100 bridge_fan_speed = 30 cooling = 1 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 10 filament_cost = 58.66 filament_density = 1.18 first_layer_bed_temperature = 100 first_layer_temperature = 270 max_fan_speed = 20 min_fan_speed = 10 temperature = 270 [filament:ColorFabb XT @MINI] inherits = *PETMINI* # alias = ColorFabb XT filament_vendor = ColorFabb filament_type = PETG filament_cost = 62.9 filament_density = 1.27 first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 270 [filament:ColorFabb XT-CF20 @MINI] inherits = *PETMINI* # alias = ColorFabb XT-CF20 filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" extrusion_multiplier = 1.2 filament_cost = 80.65 filament_density = 1.35 filament_colour = #804040 filament_max_volumetric_speed = 1 first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 260 [filament:Taulman T-Glase @MINI] inherits = *PETMINI* # alias = Taulman T-Glase filament_vendor = Taulman filament_cost = 40 filament_density = 1.27 bridge_fan_speed = 40 cooling = 0 fan_always_on = 0 first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 [filament:E3D Edge @MINI] inherits = *PETMINI* # alias = E3D Edge filament_vendor = E3D filament_cost = 56.9 filament_density = 1.26 filament_type = EDGE [filament:Prusa PETG @MINI] inherits = *PETMINI* # alias = Prusa PETG filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.27 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Prusa PETG @0.6 nozzle MINI] inherits = *PETMINI06* # alias = Prusa PETG filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.27 [sla_print:*common*] compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/ layer_height = 0.05 output_filename_format = [input_filename_base].sl1 pad_edge_radius = 0.5 pad_enable = 1 pad_max_merge_distance = 50 pad_wall_height = 0 pad_wall_thickness = 1 pad_wall_slope = 90 slice_closing_radius = 0.005 support_base_diameter = 3 support_base_height = 1 support_critical_angle = 45 support_density_at_45 = 250 support_density_at_horizontal = 500 support_head_front_diameter = 0.4 support_head_penetration = 0.4 support_head_width = 3 support_max_bridge_length = 10 support_minimal_z = 0 support_object_elevation = 5 support_pillar_diameter = 1 support_pillar_connection_mode = zigzag support_pillar_widening_factor = 0 supports_enable = 1 [sla_print:0.025 UltraDetail] inherits = *common* layer_height = 0.025 support_head_width = 2 [sla_print:0.035 Detail] inherits = *common* layer_height = 0.035 [sla_print:0.05 Normal] inherits = *common* layer_height = 0.05 [sla_print:0.1 Fast] inherits = *common* layer_height = 0.1 support_head_front_diameter = 0.5 support_head_penetration = 0.5 support_pillar_diameter = 1.3 ########### Materials [sla_material:*common 0.05*] compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/ compatible_prints_condition = layer_height == 0.05 exposure_time = 12 initial_exposure_time = 45 initial_layer_height = 0.05 material_correction = 1,1,1 material_notes = [sla_material:*common 0.025*] inherits = *common 0.05* compatible_prints_condition = layer_height == 0.025 exposure_time = 10 initial_exposure_time = 35 initial_layer_height = 0.025 [sla_material:*common 0.035*] inherits = *common 0.05* compatible_prints_condition = layer_height == 0.035 exposure_time = 13 initial_exposure_time = 40 initial_layer_height = 0.035 [sla_material:*common 0.1*] inherits = *common 0.05* compatible_prints_condition = layer_height == 0.1 exposure_time = 20 initial_exposure_time = 45 initial_layer_height = 0.1 ########### Materials 0.025 [sla_material:3DM-ABS @0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM [sla_material:3DM-Vulcan Gold @0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM [sla_material:3DM-TOUGH Clear 0.025] inherits = *common 0.025* exposure_time = 9 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM [sla_material:BlueCast Phrozen Wax @0.025] inherits = *common 0.025* exposure_time = 15 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast EcoGray @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 40 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Kera Master Dental @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 45 material_type = Dental material_vendor = BlueCast [sla_material:BlueCast X10 @0.025] inherits = *common 0.025* exposure_time = 4 initial_exposure_time = 100 material_type = Tough material_vendor = BlueCast [sla_material:Esun Bio-Photopolymer Resin White @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Esun [sla_material:Esun Standard Resin Black @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 30 material_type = Tough material_vendor = Esun [sla_material:Photocentric Ash Grey @0.025] inherits = *common 0.025* exposure_time = 9 initial_exposure_time = 30 material_type = Tough material_vendor = Photocentric [sla_material:Resinworks 3D Violet @0.025] inherits = *common 0.025* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = Resinworks 3D [sla_material:Resinworks 3D Green @0.025] inherits = *common 0.025* exposure_time = 17 initial_exposure_time = 30 material_type = Tough material_vendor = Resinworks 3D ## Prusa [sla_material:Prusa Orange Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Grey Tough @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Azure Blue Tough @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Maroon Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Beige Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Pink Tough @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White Tough @0.025] inherits = *common 0.025* exposure_time = 6.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Transparent Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 15 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Green Dental Casting @0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 40 material_type = Casting material_vendor = Made for Prusa [sla_material:Prusa Transparent Green Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Clear ABS like @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa ABS like White @0.025] ## inherits = *common 0.025* ## exposure_time = 6 ## initial_exposure_time = 30 [sla_material:Prusa Grey High Tenacity @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Cyan Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Magenta Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Yellow Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Orange-Yellow Teeth Model @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa ########### Materials 0.05 [sla_material:Asiga Denta Model @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Dental material_vendor = Asiga [sla_material:Ameralabs AMD 3 LED @0.05] inherits = *common 0.05* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Ameralabs [sla_material:BlueCast EcoGray @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Kera Master Dental @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 50 material_type = Dental material_vendor = BlueCast [sla_material:BlueCast LCD-DLP Original @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 60 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Phrozen Wax @0.05] inherits = *common 0.05* exposure_time = 16 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast S+ @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 45 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast X5 @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 100 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast X10 @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 100 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast 23LS @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast [sla_material:Monocure 3D Black Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 40 material_type = Tough material_vendor = Monocure [sla_material:Monocure 3D Blue Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 40 material_type = Tough material_vendor = Monocure [sla_material:Monocure 3D Clear Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 40 material_type = Tough material_vendor = Monocure [sla_material:Monocure 3D Grey Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 30 material_type = Tough material_vendor = Monocure [sla_material:Monocure 3D White Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 40 material_type = Tough material_vendor = Monocure [sla_material:3DM-HTR140 (high temperature) @0.05] inherits = *common 0.05* exposure_time = 12 initial_exposure_time = 45 material_type = Tough material_vendor = Monocure [sla_material:Esun Bio-Photopolymer Resin White @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 30 material_type = Tough material_vendor = Esun [sla_material:Esun Standard Resin Black @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 material_type = Tough material_vendor = Esun [sla_material:3DM-ABS @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 25 material_type = Tough material_vendor = 3DM [sla_material:3DM-BLACK @0.05] inherits = *common 0.05* exposure_time = 20 initial_exposure_time = 40 material_type = Tough material_vendor = 3DM [sla_material:3DM-DENT @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 45 material_type = Dental material_vendor = 3DM [sla_material:3DM-HR Green @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 40 material_type = Tough material_vendor = 3DM [sla_material:3DM-HR Red Wine @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM [sla_material:3DM-XPRO White @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM [sla_material:3DM-Vulcan Gold @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM [sla_material:3DM-TOUGH Clear 0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM [sla_material:FTD Ash Grey @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 40 material_type = Tough material_vendor = FTD [sla_material:Harz Labs Model Resin Cherry @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 45 material_type = Tough material_vendor = Harz Labs [sla_material:Resinworks 3D Violet @0.05] inherits = *common 0.05* exposure_time = 17 initial_exposure_time = 30 material_type = Tough material_vendor = Resinworks 3D [sla_material:Resinworks 3D Green @0.05] inherits = *common 0.05* exposure_time = 21 initial_exposure_time = 35 material_type = Tough material_vendor = Resinworks 3D [sla_material:Photocentric Hard Grey @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = Photocentric [sla_material:Photocentric Ash Grey @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 30 material_type = Tough material_vendor = Photocentric ## Prusa [sla_material:Prusa Beige Tough @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Orange Tough @0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Grey Tough @0.05] inherits = *common 0.05* exposure_time = 8.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Black Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa Super Low Odor Beige Tough @0.05] ## inherits = *common 0.05* ## exposure_time = 7.5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa ## [sla_material:Prusa Super Low Odor White Tough @0.05] ## inherits = *common 0.05* ## exposure_time = 6.5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa ## [sla_material:Prusa Super Low Odor Grey Tough @0.05] ## inherits = *common 0.05* ## exposure_time = 6.5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Cyan Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Magenta Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Yellow Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa Black High Tenacity @0.05] ## inherits = *common 0.05* ## exposure_time = 7 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa [sla_material:Prusa Orange-Yellow Teeth Model @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Green Dental Casting @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 50 material_type = Casting material_vendor = Made for Prusa ## [sla_material:Prusa Yellow Solid @0.05] ## inherits = *common 0.05* ## exposure_time = 7 ## initial_exposure_time = 35 [sla_material:Prusa White Tough @0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Transparent Green Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Transparent Red Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Maroon Tough @0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Pink Tough @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Azure Blue Tough @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Transparent Tough @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 15 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa Yellow Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 [sla_material:Prusa Transparent Flexible @0.05] inherits = *common 0.05* exposure_time = 5 initial_exposure_time = 15 material_type = Flexible material_vendor = Made for Prusa ## [sla_material:Prusa White Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 [sla_material:Prusa Blue Flexible @0.05] inherits = *common 0.05* exposure_time = 5 initial_exposure_time = 15 material_type = Flexible material_vendor = Made for Prusa ## [sla_material:Prusa Black Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 ## [sla_material:Prusa Red Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 [sla_material:Prusa Clear ABS like @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa ABS like White @0.05] ## inherits = *common 0.05* ## exposure_time = 8 ## initial_exposure_time = 30 [sla_material:Prusa Yellow Jewelry Casting @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 45 material_type = Casting material_vendor = Made for Prusa [sla_material:Prusa Grey High Tenacity @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa ########### Materials 0.035 [sla_material:Prusa Orange Tough @0.035] inherits = *common 0.035* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ########### Materials 0.1 [sla_material:BlueCast EcoGray @0.1] inherits = *common 0.1* exposure_time = 10 initial_exposure_time = 35 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Kera Master Dental @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast ## Prusa [sla_material:Prusa Orange Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Beige Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Pink Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Azure Blue Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Maroon Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Black Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 55 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Transparent Tough @0.1] inherits = *common 0.1* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Green Dental Casting @0.1] inherits = *common 0.1* exposure_time = 15 initial_exposure_time = 50 material_type = Casting material_vendor = Made for Prusa [sla_material:Prusa Transparent Green Tough @0.1] inherits = *common 0.1* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [printer:*common*] printer_technology = FFF bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n between_objects_gcode = deretract_speed = 0 end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors extruder_offset = 0x0 gcode_flavor = marlin silent_mode = 0 remaining_times = 1 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 2.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] max_layer_height = 0.25 min_layer_height = 0.07 max_print_height = 200 nozzle_diameter = 0.4 octoprint_apikey = octoprint_host = printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n printer_settings_id = retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 0.8 retract_length_toolchange = 4 retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 35 serial_port = serial_speed = 250000 single_extruder_multi_material = 0 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 z_offset = 0 printer_model = MK2S printer_variant = 0.4 default_print_profile = 0.15mm OPTIMAL default_filament_profile = Prusament PLA [printer:*multimaterial*] inherits = *common* deretract_speed = 50 retract_before_travel = 3 retract_before_wipe = 60% retract_layer_change = 0 retract_length = 4 retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 80 parking_pos_retraction = 92 cooling_tube_length = 5 cooling_tube_retraction = 91.5 single_extruder_multi_material = 1 variable_layer_height = 1 printer_model = MK2SMM [printer:*mm-single*] inherits = *multimaterial* end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0 default_print_profile = 0.15mm OPTIMAL [printer:*mm-multi*] inherits = *multimaterial* high_current_on_filament_swap = 1 end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259 nozzle_diameter = 0.4,0.4,0.4,0.4 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0 default_print_profile = 0.15mm OPTIMAL # XXXXXXXXXXXXXXXXX # XXX--- MK2 ---XXX # XXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK2S] inherits = *common* [printer:Original Prusa i3 MK2S 0.25 nozzle] inherits = *common* max_layer_height = 0.15 min_layer_height = 0.05 nozzle_diameter = 0.25 retract_length = 1 retract_speed = 50 variable_layer_height = 1 printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle [printer:Original Prusa i3 MK2S 0.6 nozzle] inherits = *common* max_layer_height = 0.35 min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle # XXXXXXXXXXXXXXXXXXX # XXX--- MK2MM ---XXX # XXXXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK2S MMU1 Single] inherits = *mm-single* max_layer_height = 0.25 min_layer_height = 0.07 [printer:Original Prusa i3 MK2S MMU1 Single 0.6 nozzle] inherits = *mm-single* nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle max_layer_height = 0.35 min_layer_height = 0.1 [printer:Original Prusa i3 MK2S MMU1] inherits = *mm-multi* nozzle_diameter = 0.4,0.4,0.4,0.4 max_layer_height = 0.25 min_layer_height = 0.07 [printer:Original Prusa i3 MK2S MMU1 0.6 nozzle] inherits = *mm-multi* nozzle_diameter = 0.6,0.6,0.6,0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle max_layer_height = 0.35 min_layer_height = 0.1 # XXXXXXXXXXXXXXXXXXX # XXX--- MK2.5 ---XXX # XXXXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK2.5] inherits = Original Prusa i3 MK2S printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 0.25 nozzle] inherits = Original Prusa i3 MK2S 0.25 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 0.6 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 MMU2 Single] inherits = Original Prusa i3 MK2.5; *mm2* printer_model = MK2.5MMU2 single_extruder_multi_material = 0 max_print_height = 200 remaining_times = 1 silent_mode = 0 retract_lift_below = 199 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 4.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle printer_model = MK2.5MMU2 [printer:Original Prusa i3 MK2.5 MMU2 Single 0.25 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle printer_model = MK2.5MMU2 [printer:Original Prusa i3 MK2.5 MMU2] inherits = Original Prusa i3 MK2.5; *mm2* printer_model = MK2.5MMU2 max_print_height = 200 remaining_times = 1 silent_mode = 0 retract_lift_below = 199 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 4.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 # The 5x nozzle diameter defines the number of extruders. Other extruder parameters # (for example the retract values) are duplicaed from the first value, so they do not need # to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S] inherits = Original Prusa i3 MK2.5 printer_model = MK2.5S start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.25 nozzle] inherits = Original Prusa i3 MK2.5 0.25 nozzle printer_model = MK2.5S start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.6 nozzle] inherits = Original Prusa i3 MK2.5 0.6 nozzle printer_model = MK2.5S start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S MMU2S Single] inherits = Original Prusa i3 MK2.5; *mm2s* printer_model = MK2.5SMMU2S single_extruder_multi_material = 0 max_print_height = 200 remaining_times = 1 silent_mode = 0 retract_lift_below = 199 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 4.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n max_layer_height = 0.35 min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle [printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n max_layer_height = 0.15 min_layer_height = 0.05 nozzle_diameter = 0.25 printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n [printer:Original Prusa i3 MK2.5S MMU2S] inherits = Original Prusa i3 MK2.5; *mm2s* printer_model = MK2.5SMMU2S max_print_height = 200 remaining_times = 1 silent_mode = 0 retract_lift_below = 199 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 4.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 # The 5x nozzle diameter defines the number of extruders. Other extruder parameters # (for example the retract values) are duplicaed from the first value, so they do not need # to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle [printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK2.5 MMU2 nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle # XXXXXXXXXXXXXXXXX # XXX--- MK3 ---XXX # XXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK3] inherits = *common* end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors machine_max_acceleration_e = 5000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_x = 1000,960 machine_max_acceleration_y = 1000,960 machine_max_acceleration_z = 1000,1000 machine_max_feedrate_e = 120,120 machine_max_feedrate_x = 200,100 machine_max_feedrate_y = 200,100 machine_max_feedrate_z = 12,12 machine_max_jerk_e = 4.5,4.5 machine_max_jerk_x = 8,8 machine_max_jerk_y = 8,8 machine_max_jerk_z = 0.4,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 silent_mode = 1 remaining_times = 1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n retract_lift_below = 209 max_print_height = 210 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} printer_model = MK3 default_print_profile = 0.15mm QUALITY @MK3 [printer:Original Prusa i3 MK3 0.25 nozzle] inherits = Original Prusa i3 MK3 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3 0.6 nozzle] inherits = Original Prusa i3 MK3 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3S] inherits = Original Prusa i3 MK3 printer_model = MK3S start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:Original Prusa i3 MK3S 0.25 nozzle] inherits = Original Prusa i3 MK3 0.25 nozzle printer_model = MK3S start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:Original Prusa i3 MK3S 0.6 nozzle] inherits = Original Prusa i3 MK3 0.6 nozzle printer_model = MK3S start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:*mm2*] inherits = Original Prusa i3 MK3 single_extruder_multi_material = 1 cooling_tube_length = 10 cooling_tube_retraction = 30 parking_pos_retraction = 85 retract_length_toolchange = 3 extra_loading_move = -13 printer_model = MK3MMU2 default_print_profile = 0.15mm QUALITY @MK3 default_filament_profile = Prusament PLA @MMU2 [printer:*mm2s*] inherits = Original Prusa i3 MK3 single_extruder_multi_material = 1 cooling_tube_length = 20 cooling_tube_retraction = 40 parking_pos_retraction = 85 retract_length_toolchange = 3 extra_loading_move = -25 printer_model = MK3SMMU2S default_print_profile = 0.15mm QUALITY @MK3 default_filament_profile = Prusament PLA @MMU2 [printer:Original Prusa i3 MK3 MMU2 Single] inherits = *mm2* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single single_extruder_multi_material = 0 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single single_extruder_multi_material = 0 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2] inherits = *mm2* # The 5x nozzle diameter defines the number of extruders. Other extruder parameters # (for example the retract values) are duplicaed from the first value, so they do not need # to be defined explicitely. machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK3S MMU2S Single] inherits = *mm2s* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK3S MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK3S MMU2S Single single_extruder_multi_material = 0 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3S MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK3S MMU2S Single single_extruder_multi_material = 0 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3S MMU2S] inherits = *mm2s* machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n ## 0.6mm nozzle MMU2/S printer profiles [printer:Original Prusa i3 MK3S MMU2S 0.6 nozzle] inherits = Original Prusa i3 MK3S MMU2S nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 ## MINI [printer:Original Prusa MINI] inherits = *common* printer_model = MINI printer_technology = FFF printer_variant = 0.4 printer_vendor = thumbnails = 16x16,220x124 bed_shape = 0x0,180x0,180x180,0x180 default_filament_profile = "Prusament PLA" default_print_profile = 0.15mm QUALITY @MINI gcode_flavor = marlin machine_max_acceleration_e = 5000 machine_max_acceleration_extruding = 1250 machine_max_acceleration_retracting = 1250 machine_max_acceleration_x = 1250 machine_max_acceleration_y = 1250 machine_max_acceleration_z = 400 machine_max_feedrate_e = 80 machine_max_feedrate_x = 180 machine_max_feedrate_y = 180 machine_max_feedrate_z = 12 machine_max_jerk_e = 10 machine_max_jerk_x = 8 machine_max_jerk_y = 8 machine_max_jerk_z = 2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 max_layer_height = 0.25 max_print_height = 180 min_layer_height = 0.07 nozzle_diameter = 0.4 retract_length = 3.2 retract_lift = 0.2 retract_speed = 70 deretract_speed = 40 wipe = 1 retract_before_wipe = 70% retract_before_travel = 1.5 retract_lift_above = 0 retract_lift_below = 179 retract_layer_change = 0 silent_mode = 0 remaining_times = 1 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow end_gcode = G1 E-1 F2100 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y180 F4200 ; park print head\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM84 ; disable motors printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n extruder_colour = [printer:Original Prusa MINI 0.25 nozzle] inherits = Original Prusa MINI printer_variant = 0.25 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI retract_length = 3 retract_lift = 0.15 retract_speed = 70 deretract_speed = 40 wipe = 1 retract_before_wipe = 70% retract_before_travel = 1 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow [printer:Original Prusa MINI 0.6 nozzle] inherits = Original Prusa MINI printer_variant = 0.6 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI retract_length = 3.5 retract_lift = 0.2 retract_speed = 70 deretract_speed = 40 wipe = 1 retract_before_wipe = 70% retract_before_travel = 1.5 [printer:Original Prusa SL1] printer_technology = SLA printer_model = SL1 printer_variant = default default_sla_material_profile = Prusa Orange Tough 0.05 default_sla_print_profile = 0.05 Normal thumbnails = 400x400,800x480 bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02 display_height = 68.04 display_orientation = portrait display_pixels_x = 2560 display_pixels_y = 1440 display_width = 120.96 max_print_height = 150 min_exposure_time = 1 max_exposure_time = 120 min_initial_exposure_time = 1 max_initial_exposure_time = 300 printer_correction = 1,1,1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n # The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer. [obsolete_presets] print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2" filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"