# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2023-03-03 14:25+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:46 src/slic3r/GUI/AboutDialog.cpp:306 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:143 src/slic3r/GUI/AboutDialog.cpp:270 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:145 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:214 #, possible-c-format, possible-boost-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:245 src/slic3r/GUI/AboutDialog.cpp:370 #: src/slic3r/GUI/GUI_App.cpp:271 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:272 src/slic3r/GUI/GUI_App.cpp:277 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:273 src/slic3r/GUI/GUI_App.cpp:277 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:274 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:275 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:311 msgid "Copy Version Info" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79 #, possible-c-format, possible-boost-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84 #, possible-boost-format msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85 msgid "" "Please save your project and restart PrusaSlicer. We would be glad if you " "reported the issue." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:188 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183 #, possible-boost-format msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:279 msgid "Access violation" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:281 msgid "Illegal instruction" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:283 msgid "Divide by zero" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:285 msgid "Overflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:287 msgid "Underflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290 msgid "Floating reserved operand" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:293 msgid "Stack overflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:652 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:719 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:683 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:703 msgid "Unknown error occured during exporting G-code." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:688 #, possible-boost-format msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?\n" "Error message: %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:691 #, possible-boost-format msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:694 #, possible-boost-format msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:697 #, possible-boost-format msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:700 #, possible-boost-format msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:708 #, possible-boost-format msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:722 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:738 #, possible-boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:31 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1576 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:241 src/slic3r/GUI/Plater.cpp:220 #: src/slic3r/GUI/Tab.cpp:2697 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:32 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:33 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1994 #: src/libslic3r/PrintConfig.cpp:1109 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:49 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:58 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:291 #: src/slic3r/GUI/ConfigWizard.cpp:1796 src/slic3r/GUI/ConfigWizard.cpp:1832 #: src/slic3r/GUI/ConfigWizard.cpp:1846 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100 #: src/slic3r/GUI/GCodeViewer.cpp:3449 src/slic3r/GUI/GCodeViewer.cpp:3455 #: src/slic3r/GUI/GCodeViewer.cpp:3463 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:246 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:508 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:528 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1602 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1211 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1977 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:145 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:370 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:529 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:664 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:665 #: src/slic3r/GUI/ObjectDataViewModel.cpp:150 #: src/slic3r/GUI/WipeTowerDialog.cpp:118 src/libslic3r/PrintConfig.cpp:279 #: src/libslic3r/PrintConfig.cpp:303 src/libslic3r/PrintConfig.cpp:310 #: src/libslic3r/PrintConfig.cpp:479 src/libslic3r/PrintConfig.cpp:634 #: src/libslic3r/PrintConfig.cpp:657 src/libslic3r/PrintConfig.cpp:724 #: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:782 #: src/libslic3r/PrintConfig.cpp:902 src/libslic3r/PrintConfig.cpp:913 #: src/libslic3r/PrintConfig.cpp:931 src/libslic3r/PrintConfig.cpp:1112 #: src/libslic3r/PrintConfig.cpp:1295 src/libslic3r/PrintConfig.cpp:1359 #: src/libslic3r/PrintConfig.cpp:1369 src/libslic3r/PrintConfig.cpp:1650 #: src/libslic3r/PrintConfig.cpp:1842 src/libslic3r/PrintConfig.cpp:1903 #: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1939 #: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/PrintConfig.cpp:2005 #: src/libslic3r/PrintConfig.cpp:2127 src/libslic3r/PrintConfig.cpp:2136 #: src/libslic3r/PrintConfig.cpp:2155 src/libslic3r/PrintConfig.cpp:2176 #: src/libslic3r/PrintConfig.cpp:2188 src/libslic3r/PrintConfig.cpp:2196 #: src/libslic3r/PrintConfig.cpp:2237 src/libslic3r/PrintConfig.cpp:2245 #: src/libslic3r/PrintConfig.cpp:2255 src/libslic3r/PrintConfig.cpp:2263 #: src/libslic3r/PrintConfig.cpp:2271 src/libslic3r/PrintConfig.cpp:2336 #: src/libslic3r/PrintConfig.cpp:2565 src/libslic3r/PrintConfig.cpp:2632 #: src/libslic3r/PrintConfig.cpp:2647 src/libslic3r/PrintConfig.cpp:2746 #: src/libslic3r/PrintConfig.cpp:2755 src/libslic3r/PrintConfig.cpp:2801 #: src/libslic3r/PrintConfig.cpp:2886 src/libslic3r/PrintConfig.cpp:2896 #: src/libslic3r/PrintConfig.cpp:3020 src/libslic3r/PrintConfig.cpp:3108 #: src/libslic3r/PrintConfig.cpp:3115 src/libslic3r/PrintConfig.cpp:3122 #: src/libslic3r/PrintConfig.cpp:3136 src/libslic3r/PrintConfig.cpp:3160 #: src/libslic3r/PrintConfig.cpp:3170 src/libslic3r/PrintConfig.cpp:3180 #: src/libslic3r/PrintConfig.cpp:3330 src/libslic3r/PrintConfig.cpp:3339 #: src/libslic3r/PrintConfig.cpp:3348 src/libslic3r/PrintConfig.cpp:3358 #: src/libslic3r/PrintConfig.cpp:3391 src/libslic3r/PrintConfig.cpp:3434 #: src/libslic3r/PrintConfig.cpp:3444 src/libslic3r/PrintConfig.cpp:3456 #: src/libslic3r/PrintConfig.cpp:3476 src/libslic3r/PrintConfig.cpp:3491 #: src/libslic3r/PrintConfig.cpp:3501 src/libslic3r/PrintConfig.cpp:3644 #: src/libslic3r/PrintConfig.cpp:3681 src/libslic3r/PrintConfig.cpp:3878 #: src/libslic3r/PrintConfig.cpp:3893 src/libslic3r/PrintConfig.cpp:3907 #: src/libslic3r/PrintConfig.cpp:3918 src/libslic3r/PrintConfig.cpp:3931 #: src/libslic3r/PrintConfig.cpp:3976 src/libslic3r/PrintConfig.cpp:3986 #: src/libslic3r/PrintConfig.cpp:3995 src/libslic3r/PrintConfig.cpp:4005 #: src/libslic3r/PrintConfig.cpp:4021 src/libslic3r/PrintConfig.cpp:4045 #: src/libslic3r/PrintConfig.cpp:4072 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:66 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:79 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:80 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:81 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:179 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1565 #: src/slic3r/GUI/GUI_ObjectList.cpp:1798 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:203 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:249 src/slic3r/GUI/GCodeViewer.cpp:3914 #: src/slic3r/GUI/MainFrame.cpp:2240 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:273 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:283 src/slic3r/GUI/BedShapeDialog.cpp:354 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/BedShapeDialog.cpp:362 #: src/slic3r/GUI/Tab.cpp:3973 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:317 src/slic3r/GUI/BedShapeDialog.cpp:388 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:344 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:506 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:512 src/slic3r/GUI/BedShapeDialog.cpp:560 #: src/slic3r/GUI/BedShapeDialog.cpp:582 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:523 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:531 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:535 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:550 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:572 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:96 src/slic3r/GUI/ConfigWizard.cpp:1732 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:58 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:75 src/slic3r/GUI/BonjourDialog.cpp:253 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:77 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:79 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:227 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:234 msgid "Finished" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:240 msgid "Multiple resolved IP addresses" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:249 #, possible-boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:21 msgid "Palette 1 (default)" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:22 msgid "Palette 2" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:23 msgid "Palette 3" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:24 msgid "Palette 4" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:25 msgid "Palette 5" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:26 msgid "Palette 6" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:27 msgid "Palette 7" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:28 msgid "Palette 8" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:112 msgid "Revert color to default" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:127 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:128 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:155 msgid "Default palette for mode markers" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2422 #: src/slic3r/GUI/wxExtensions.cpp:759 msgid "Simple" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2424 #: src/slic3r/GUI/wxExtensions.cpp:759 msgctxt "Mode" msgid "Advanced" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2425 #: src/slic3r/GUI/wxExtensions.cpp:759 msgid "Expert" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:182 msgid "Revert color" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:200 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:50 msgid "" "Layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:51 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1394 #: src/libslic3r/PrintConfig.cpp:299 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:62 msgid "" "First layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:63 src/libslic3r/PrintConfig.cpp:1291 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:82 msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:89 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:90 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:123 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:126 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:127 #: src/slic3r/GUI/ConfigManipulation.cpp:145 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:140 src/libslic3r/Print.cpp:672 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:144 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:166 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:169 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:170 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:194 #, possible-boost-format msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:196 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:197 #: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128 #: src/slic3r/GUI/Plater.cpp:468 src/slic3r/GUI/Tab.cpp:1450 #: src/slic3r/GUI/Tab.cpp:1452 src/libslic3r/PrintConfig.cpp:494 #: src/libslic3r/PrintConfig.cpp:811 src/libslic3r/PrintConfig.cpp:831 #: src/libslic3r/PrintConfig.cpp:1187 src/libslic3r/PrintConfig.cpp:1200 #: src/libslic3r/PrintConfig.cpp:1225 src/libslic3r/PrintConfig.cpp:1444 #: src/libslic3r/PrintConfig.cpp:1473 src/libslic3r/PrintConfig.cpp:1537 #: src/libslic3r/PrintConfig.cpp:1557 src/libslic3r/PrintConfig.cpp:1576 #: src/libslic3r/PrintConfig.cpp:2395 src/libslic3r/PrintConfig.cpp:2412 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:349 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:351 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:362 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:364 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:26 src/libslic3r/PrintConfig.cpp:353 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:29 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1135 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63 src/libslic3r/Preset.cpp:1480 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67 src/libslic3r/Preset.cpp:1482 msgid "SLA print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 #: src/slic3r/GUI/ConfigWizard.cpp:794 src/slic3r/GUI/GUI.cpp:331 #: src/slic3r/GUI/Plater.cpp:851 src/libslic3r/Preset.cpp:1483 msgid "SLA material" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:70 src/libslic3r/Preset.cpp:1484 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:74 src/slic3r/GUI/Tab.cpp:1311 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:74 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:77 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:80 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:80 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:92 #, possible-c-format, possible-boost-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:95 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:122 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:291 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:295 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:359 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:359 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:360 src/slic3r/GUI/ConfigWizard.cpp:681 #: src/slic3r/GUI/FileArchiveDialog.cpp:261 #: src/slic3r/GUI/FileArchiveDialog.cpp:283 src/slic3r/GUI/Preferences.cpp:550 #: src/slic3r/GUI/Tab.cpp:4058 src/slic3r/GUI/UnsavedChangesDialog.cpp:1161 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:361 src/slic3r/GUI/ConfigWizard.cpp:682 #: src/slic3r/GUI/DoubleSlider.cpp:2099 #: src/slic3r/GUI/FileArchiveDialog.cpp:265 #: src/slic3r/GUI/FileArchiveDialog.cpp:283 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1984 src/slic3r/GUI/Plater.cpp:439 #: src/slic3r/GUI/Plater.cpp:594 src/slic3r/GUI/Preferences.cpp:552 #: src/libslic3r/PrintConfig.cpp:1347 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:513 #, possible-c-format, possible-boost-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:515 #, possible-c-format, possible-boost-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:517 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:519 #, possible-c-format, possible-boost-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:524 msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:527 msgid "" "Perform desktop integration (Sets this binary to be searchable by the " "system)." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:579 #, possible-c-format, possible-boost-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:670 msgid "Printer:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:672 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:673 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:750 src/slic3r/GUI/ConfigWizard.cpp:938 #: src/slic3r/GUI/ConfigWizard.cpp:1024 src/slic3r/GUI/ConfigWizard.cpp:1163 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:754 src/slic3r/GUI/ConfigWizard.cpp:1165 msgid "(Templates)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:789 #, possible-boost-format msgid "" "%1% visible for (\"Template\") printer are universal profiles " "available for all printers. These might not be compatible with your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:789 src/slic3r/GUI/ConfigWizard.cpp:791 #: src/slic3r/GUI/ConfigWizard.cpp:2410 src/slic3r/GUI/ConfigWizard.cpp:3360 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:789 src/slic3r/GUI/ConfigWizard.cpp:791 msgid "SLA materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:791 #, possible-boost-format msgid "" "%1% marked with * are not compatible with some installed " "printers." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:794 #, possible-boost-format msgid "All installed printers are compatible with the selected %1%." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:794 src/libslic3r/Preset.cpp:1481 msgid "filament" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:818 msgid "" "Only the following installed printers are compatible with the selected " "filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:819 msgid "" "Only the following installed printers are compatible with the selected SLA " "materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1213 msgid "" "You have selected template filament. Please note that these filaments are " "available for all printers but are NOT certain to be compatible with your " "printer. Do you still wish to have this filament selected?\n" "(This message won't be displayed again.)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1214 src/slic3r/GUI/ConfigWizard.cpp:2720 #: src/slic3r/GUI/ConfigWizard.cpp:2860 src/slic3r/GUI/DoubleSlider.cpp:2591 #: src/slic3r/GUI/DoubleSlider.cpp:2612 src/slic3r/GUI/GUI.cpp:245 #: src/slic3r/GUI/GUI_App.cpp:3458 src/slic3r/GUI/UpdateDialogs.cpp:204 #: src/slic3r/GUI/UpdateDialogs.cpp:212 src/slic3r/GUI/UpdateDialogs.cpp:217 #: src/slic3r/GUI/UpdateDialogs.cpp:222 src/slic3r/GUI/UpdateDialogs.cpp:229 #: src/slic3r/GUI/UpdateDialogs.cpp:234 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1262 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1262 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1264 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1265 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1282 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1282 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1290 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1294 #, possible-c-format, possible-boost-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1300 src/slic3r/GUI/Preferences.cpp:306 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1304 #, possible-c-format, possible-boost-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1307 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1312 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1361 src/slic3r/GUI/Preferences.cpp:1076 msgid "Download path" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1366 src/slic3r/GUI/FirmwareDialog.cpp:815 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:300 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375 msgid "Browse" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1371 msgid "Choose folder:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1409 msgid "Downloads from URL" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1409 msgid "Downloads" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1417 msgid "Allow built-in downloader" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1424 #, possible-c-format, possible-boost-format msgid "" "If enabled, %s registers to start on custom URL on www.printables.com. You " "will be able to use button with %s logo to open models in this %s. The model " "will be downloaded into folder you choose bellow." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1431 msgid "" "On Linux systems the process of registration also creates desktop " "integration files for this version of application." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1458 msgid "Chosen directory for downloads does not Exists." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1545 src/slic3r/GUI/GUI_Factories.cpp:810 #: src/slic3r/GUI/Plater.cpp:3732 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1548 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1552 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1561 msgid "Files association" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1563 src/slic3r/GUI/Preferences.cpp:292 msgid "Associate .3mf files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1564 src/slic3r/GUI/Preferences.cpp:297 msgid "Associate .stl files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1574 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1576 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1581 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1582 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1583 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1596 msgid "The size of the object can be specified in inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1597 msgid "Use inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1617 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1621 #, possible-c-format, possible-boost-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1654 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1654 src/slic3r/GUI/Tab.cpp:2354 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1658 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1707 src/slic3r/GUI/ConfigWizard.cpp:1778 #: src/slic3r/GUI/ConfigWizard.cpp:1783 src/slic3r/GUI/ConfigWizard.cpp:1788 #: src/slic3r/GUI/Field.cpp:258 src/slic3r/GUI/Field.cpp:328 #: src/slic3r/GUI/Field.cpp:1585 src/slic3r/GUI/GUI_ObjectLayers.cpp:435 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1732 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1735 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1755 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1610 msgid "Build Volume" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1758 msgid "Set vertical size of your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1795 msgid "Max print height:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1813 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1813 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1828 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1831 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1841 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1842 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1845 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1903 msgid "Nozzle and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1903 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1919 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1920 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1923 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1924 src/slic3r/GUI/ConfigWizard.cpp:1938 #: src/libslic3r/PrintConfig.cpp:437 src/libslic3r/PrintConfig.cpp:1271 #: src/libslic3r/PrintConfig.cpp:1326 src/libslic3r/PrintConfig.cpp:2930 #: src/libslic3r/PrintConfig.cpp:3689 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1933 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1934 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1937 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2410 src/slic3r/GUI/ConfigWizard.cpp:3363 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2464 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2469 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2718 #, possible-boost-format msgid "" "Following printer profiles has no default filament: %1%Please select one " "manually." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2719 #, possible-boost-format msgid "" "Following printer profiles has no default material: %1%Please select one " "manually." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2883 msgid "The following FFF printer models have no filament selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2887 msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2901 msgid "The following SLA printer models have no materials selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2905 msgid "Do you want to select default SLA materials for these printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2947 msgid "Configuration is edited in ConfigWizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3000 msgid "All user presets will be deleted." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3037 msgid "A new vendor was installed and one of its printers will be activated" msgid_plural "" "New vendors were installed and one of theirs printers will be activated" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/ConfigWizard.cpp:3069 msgid "Do you want to continue changing the configuration?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3136 msgid "A new Printer was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3141 msgid "Some Printers were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3162 msgid "A new filament was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3163 msgid "A new SLA material was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3174 msgid "Some filaments were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3174 msgid "Some SLA materials were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3218 msgid "Custom printer was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3306 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3309 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3310 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3311 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3312 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:657 #: src/slic3r/GUI/FileArchiveDialog.cpp:274 #: src/slic3r/GUI/FileArchiveDialog.cpp:283 #: src/slic3r/GUI/FirmwareDialog.cpp:153 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1593 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1365 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:96 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:907 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1606 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3332 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3340 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3360 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3360 src/slic3r/GUI/ConfigWizard.cpp:3363 #: src/slic3r/GUI/GUI_ObjectList.cpp:4353 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3363 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3486 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3487 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3489 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3490 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232 msgid "" "Performing desktop integration failed - boost::filesystem::canonical did not " "return appimage path." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243 msgid "Performing desktop integration failed - Could not find executable." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:383 msgid "" "Performing desktop integration failed because the application directory was " "not found." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:423 msgid "" "Performing desktop integration failed - could not create Gcodeviewer desktop " "file. PrusaSlicer desktop file was probably created successfully." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:472 msgid "" "Performing downloader desktop integration failed - boost::filesystem::" "canonical did not return appimage path." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:484 msgid "" "Performing downloader desktop integration failed - Could not find executable." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:602 msgid "" "Performing downloader desktop integration failed because the application " "directory was not found." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:626 #: src/slic3r/GUI/GUI_App.cpp:2407 msgid "Desktop Integration" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:633 msgid "" "Desktop Integration sets this binary to be searchable by the system.\n" "\n" "Press \"Perform\" to proceed." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:647 msgid "Perform" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:653 #: src/slic3r/GUI/GLCanvas3D.cpp:4837 src/slic3r/GUI/KBShortcutsDialog.cpp:106 #: src/slic3r/GUI/MainFrame.cpp:1426 msgid "Undo" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:109 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1448 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1450 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1454 src/slic3r/GUI/DoubleSlider.cpp:2324 msgid "Jump to move" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1457 #, possible-c-format, possible-boost-format msgid "" "Jump to height %s\n" "Set ruler mode\n" "or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1460 #, possible-c-format, possible-boost-format msgid "" "Jump to height %s\n" "or Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1465 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1467 msgid "This is wipe tower layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1477 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing sequentually." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1481 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1495 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1497 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1499 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1500 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1502 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1503 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1509 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1527 msgid "continue" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1535 #, possible-boost-format msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1536 #, possible-boost-format msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1538 #, possible-boost-format msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1540 #, possible-boost-format msgid "Custom template (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1542 #, possible-boost-format msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1549 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1551 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1554 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1557 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1560 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1565 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1567 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1568 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1671 src/slic3r/GUI/DoubleSlider.cpp:1702 #: src/slic3r/GUI/GUI_Factories.cpp:862 #, possible-c-format, possible-boost-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1672 src/slic3r/GUI/GUI_Factories.cpp:863 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1681 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1681 src/slic3r/GUI/GUI_Factories.cpp:824 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1682 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1684 src/slic3r/GUI/GUI_Factories.cpp:871 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1703 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1711 #, possible-boost-format msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1712 #, possible-boost-format msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2037 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2048 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2052 msgid "Add custom template" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2055 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2073 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2074 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2075 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2081 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2082 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2083 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2084 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2094 src/slic3r/GUI/DoubleSlider.cpp:2324 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2099 msgid "Hide ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2103 msgid "Show object height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2103 msgid "Show object height on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2107 msgid "Show estimated print time" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2107 msgid "Show estimated print time on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2111 msgid "Ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2111 msgid "Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2116 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2120 msgid "Set auto color changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2155 msgid "This action will cause deletion of all ticks on vertical slider." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2156 src/slic3r/GUI/Tab.cpp:1263 msgid "" "This action is not revertible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2157 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:524 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:537 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1119 src/slic3r/GUI/GUI.cpp:258 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:721 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:751 #: src/slic3r/GUI/WipeTowerDialog.cpp:60 src/slic3r/GUI/WipeTowerDialog.cpp:445 msgid "Warning" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2285 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2286 #, possible-boost-format msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2307 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2308 #, possible-boost-format msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2323 msgid "Enter the move you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2323 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2584 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2585 src/slic3r/GUI/DoubleSlider.cpp:2601 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2587 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2588 src/slic3r/GUI/DoubleSlider.cpp:2609 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2602 msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" "or CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2605 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2607 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2608 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/Downloader.cpp:150 #, possible-boost-format msgid "" "Download won't start. Download URL doesn't point to https://files.printables." "com : %1%" msgstr "" #: src/slic3r/GUI/Downloader.cpp:181 msgid "The download has failed:" msgstr "" #: src/slic3r/GUI/DownloaderFileGet.cpp:193 #, possible-boost-format msgid "Can't create file at %1%." msgstr "" #: src/slic3r/GUI/ExtraRenderers.cpp:323 src/slic3r/GUI/GUI_ObjectList.cpp:571 #: src/slic3r/GUI/GUI_ObjectList.cpp:583 src/slic3r/GUI/GUI_ObjectList.cpp:1043 #: src/slic3r/GUI/GUI_ObjectList.cpp:2125 #: src/slic3r/GUI/GUI_ObjectList.cpp:3013 #: src/slic3r/GUI/GUI_ObjectList.cpp:4884 #: src/slic3r/GUI/ObjectDataViewModel.cpp:259 src/libslic3r/PrintConfig.cpp:894 msgid "default" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60 #: src/libslic3r/PrintConfig.cpp:765 src/libslic3r/PrintConfig.cpp:1476 #: src/libslic3r/PrintConfig.cpp:2165 src/libslic3r/PrintConfig.cpp:2343 #: src/libslic3r/PrintConfig.cpp:2417 src/libslic3r/PrintConfig.cpp:2665 #: src/libslic3r/PrintConfig.cpp:2712 src/libslic3r/PrintConfig.cpp:2728 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164 msgid "Random sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166 msgid "If enabled, random sequence of the selected extruders will be used." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172 msgid "Allow next color repetition" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174 msgid "If enabled, a repetition of the next random color will be allowed." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:188 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:191 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:206 src/slic3r/GUI/OptionsGroup.cpp:852 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1074 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1086 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:229 src/slic3r/GUI/Field.cpp:302 #, possible-c-format, possible-boost-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:269 #, possible-c-format, possible-boost-format msgid "" "Input value is out of range\n" "Are you sure that %s is a correct value and that you want to continue?" msgstr "" #: src/slic3r/GUI/Field.cpp:272 src/slic3r/GUI/Field.cpp:347 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/Field.cpp:285 src/slic3r/GUI/Field.cpp:394 #: src/slic3r/GUI/Field.cpp:1597 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:344 #, possible-c-format, possible-boost-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:401 #, possible-boost-format msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" #: src/slic3r/GUI/FileArchiveDialog.cpp:170 msgid "Archive preview" msgstr "" #: src/slic3r/GUI/FileArchiveDialog.cpp:270 #: src/slic3r/GUI/FileArchiveDialog.cpp:283 msgid "Open" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:154 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:201 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:285 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:333 #, possible-c-format, possible-boost-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:420 src/slic3r/GUI/FirmwareDialog.cpp:455 #, possible-c-format, possible-boost-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:437 #, possible-c-format, possible-boost-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:549 #, possible-c-format, possible-boost-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:650 #, possible-c-format, possible-boost-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:652 #, possible-c-format, possible-boost-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:787 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:812 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:813 msgid "Select a file" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:819 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:827 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:830 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:831 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:851 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:862 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:358 #: src/slic3r/GUI/Mouse3DController.cpp:543 #: src/slic3r/GUI/PrintHostDialogs.cpp:313 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:125 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:915 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:916 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:919 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1488 msgid "Shape Gallery" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:76 msgid "Select shape from the gallery" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:114 src/slic3r/GUI/Tab.cpp:4377 msgid "Add" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:114 msgid "Add one or more custom shapes" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:115 src/slic3r/GUI/GalleryDialog.cpp:528 #: src/slic3r/GUI/GLCanvas3D.cpp:4638 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1945 #: src/slic3r/GUI/GUI_Factories.cpp:460 src/slic3r/GUI/Tab.cpp:3973 msgid "Delete" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:115 msgid "Delete one or more custom shape. You can't delete system shapes" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:142 msgid "Add to bed" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:142 msgid "OK" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:143 msgid "Add selected shape(s) to the bed" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:422 msgid "Choose one or more files (STL, OBJ):" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:462 #, possible-boost-format msgid "" "It looks like selected %1%-file has an error or is destructed.\n" "We can't load this file" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:473 msgid "Choose one PNG file:" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:486 msgid "Replacing of the PNG" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:530 msgid "Change thumbnail" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:571 src/slic3r/GUI/GalleryDialog.cpp:576 #, possible-boost-format msgid "Loading of the \"%1%\"" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:343 msgid "Tool position" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1547 msgid "Generating toolpaths" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1619 msgid "Generating vertex buffer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1979 msgid "Generating index buffers" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3271 msgid "Click to hide" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3271 msgid "Click to show" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3449 msgid "up to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3455 msgid "above" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3463 msgid "from" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3463 msgid "to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3513 src/slic3r/GUI/GCodeViewer.cpp:3514 #: src/slic3r/GUI/GCodeViewer.cpp:3592 msgid "Percentage" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3524 src/slic3r/GUI/GCodeViewer.cpp:3570 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3524 src/slic3r/GUI/GCodeViewer.cpp:3592 #: src/slic3r/GUI/RammingChart.cpp:90 msgid "Time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3571 msgid "Height (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3572 msgid "Width (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3573 msgid "Speed (mm/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3574 msgid "Fan speed (%)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3575 msgid "Temperature (°C)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3576 msgid "Volumetric flow rate (mm³/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3577 msgid "Layer time (linear)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3578 msgid "Layer time (logarithmic)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3579 msgid "Tool" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3580 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3592 src/slic3r/GUI/GCodeViewer.cpp:3594 #: src/slic3r/GUI/GCodeViewer.cpp:3860 msgid "Used filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3623 src/slic3r/GUI/GCodeViewer.cpp:4067 #: src/libslic3r/PrintConfig.cpp:3025 msgid "Travel" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3640 src/slic3r/GUI/GCodeViewer.cpp:3685 #: src/slic3r/GUI/GCodeViewer.cpp:3689 src/slic3r/GUI/GUI_ObjectList.cpp:338 #: src/slic3r/GUI/wxExtensions.cpp:547 src/libslic3r/PrintConfig.cpp:888 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3662 msgid "Default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3685 msgid "default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3785 src/slic3r/GUI/GCodeViewer.cpp:3841 msgid "Color change" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3804 src/slic3r/GUI/GCodeViewer.cpp:3839 msgid "Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3840 src/slic3r/GUI/GCodeViewer.cpp:3874 msgid "Pause" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3857 src/slic3r/GUI/GCodeViewer.cpp:3860 msgid "Event" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3857 src/slic3r/GUI/GCodeViewer.cpp:3860 msgid "Remaining time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3857 src/slic3r/GUI/GCodeViewer.cpp:3860 msgid "Duration" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3928 src/slic3r/GUI/GUI.cpp:332 #: src/slic3r/GUI/Plater.cpp:852 src/libslic3r/PrintConfig.cpp:335 msgid "Printer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3931 src/slic3r/GUI/GUI.cpp:328 #: src/slic3r/GUI/Plater.cpp:848 msgid "Print settings" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3936 src/slic3r/GUI/GUI.cpp:330 #: src/slic3r/GUI/Plater.cpp:849 src/slic3r/GUI/Tab.cpp:1930 #: src/slic3r/GUI/Tab.cpp:1931 msgid "Filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3950 msgid "Estimated printing times" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3969 msgid "Normal mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3970 msgid "Stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3979 src/libslic3r/PrintConfig.cpp:1249 #: src/libslic3r/PrintConfig.cpp:1267 src/libslic3r/PrintConfig.cpp:1277 #: src/libslic3r/PrintConfig.cpp:1322 msgid "First layer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3983 msgid "Total" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4002 msgid "Show stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4006 msgid "Show normal mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4071 msgid "Wipe" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4075 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4079 msgid "Deretractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4083 msgid "Seams" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4087 msgid "Tool changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4091 msgid "Color changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4095 msgid "Print pauses" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4099 msgid "Custom G-codes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4103 msgid "Center of gravity" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4108 msgid "Shells" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4113 msgid "Tool marker" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:185 src/slic3r/GUI/GLCanvas3D.cpp:4784 #: src/slic3r/GUI/ObjectDataViewModel.cpp:71 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:187 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:189 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:191 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:193 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:195 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:197 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:199 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:201 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:203 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:205 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:208 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:214 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:217 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:228 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:234 src/libslic3r/PrintConfig.cpp:908 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:246 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:255 src/slic3r/GUI/GLCanvas3D.cpp:4217 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:602 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:717 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1319 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1327 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1335 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1778 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2542 src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:117 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2638 #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:661 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3263 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3513 #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3904 src/slic3r/GUI/GLCanvas3D.cpp:4744 msgid "Switch to Settings" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3905 src/slic3r/GUI/GLCanvas3D.cpp:4744 msgid "Print Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3906 src/slic3r/GUI/GLCanvas3D.cpp:4745 msgid "Filament Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3906 src/slic3r/GUI/GLCanvas3D.cpp:4745 msgid "Material Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3907 src/slic3r/GUI/GLCanvas3D.cpp:4746 msgid "Printer Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4067 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4067 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4087 #, possible-c-format, possible-boost-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4087 #, possible-c-format, possible-boost-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4106 src/slic3r/GUI/GLCanvas3D.cpp:4762 #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Search.cpp:482 msgid "Search" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4120 src/slic3r/GUI/GLCanvas3D.cpp:4128 #: src/slic3r/GUI/Search.cpp:488 msgid "Enter a search term" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4160 msgid "Arrange options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4193 #, possible-boost-format msgid "Press %1%left mouse button to enter the exact value" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4195 msgid "Spacing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4202 msgid "Spacing from bed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4209 msgid "Enable rotations (slow)" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4228 src/slic3r/GUI/GLCanvas3D.cpp:4656 #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 src/slic3r/GUI/Plater.cpp:7118 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4630 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4647 src/slic3r/GUI/KBShortcutsDialog.cpp:105 #: src/slic3r/GUI/Plater.cpp:6047 src/slic3r/GUI/Tab.cpp:4383 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4656 src/slic3r/GUI/KBShortcutsDialog.cpp:142 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4656 msgid "Click right mouse button to show arrangement options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4676 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4685 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4697 src/slic3r/GUI/GUI_Factories.cpp:1237 #: src/slic3r/GUI/GUI_Factories.cpp:1261 src/slic3r/GUI/GUI_Factories.cpp:1272 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4708 src/slic3r/GUI/GUI_Factories.cpp:1240 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4721 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4731 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4837 src/slic3r/GUI/GLCanvas3D.cpp:4874 msgid "Click right mouse button to open/close History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4859 #, possible-boost-format msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4874 src/slic3r/GUI/KBShortcutsDialog.cpp:107 #: src/slic3r/GUI/MainFrame.cpp:1429 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4895 #, possible-boost-format msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6784 msgid "An object outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6785 msgid "A toolpath outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6786 msgid "SLA supports outside the print area were detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6787 msgid "Some objects are not visible during editing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6789 msgid "" "An object outside the print area was detected.\n" "Resolve the current problem to continue slicing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6864 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6879 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206 msgid "Planar" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:210 msgid "Auto" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:210 msgid "Manual" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:213 msgid "Plug" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:214 msgid "Dowel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:222 msgid "Prism" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:222 msgid "Frustum" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:226 msgid "Triangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:226 msgid "Square" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:226 msgid "Hexagon" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:226 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:59 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:67 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42 msgid "Circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:233 msgid "Keep orientation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:234 msgid "Place on cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235 msgid "Flip upside down" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:246 msgid "inch" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:249 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1770 #: src/slic3r/GUI/GUI_ObjectList.cpp:4139 #: src/slic3r/GUI/GUI_ObjectList.cpp:4331 msgid "Part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:249 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1770 src/libslic3r/Print.cpp:1236 msgid "Object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:264 msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:269 src/libslic3r/PrintConfig.cpp:498 #: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:2315 #: src/libslic3r/PrintConfig.cpp:2325 src/libslic3r/PrintConfig.cpp:2613 #: src/libslic3r/PrintConfig.cpp:2846 src/libslic3r/PrintConfig.cpp:2865 #: src/libslic3r/PrintConfig.cpp:2876 src/libslic3r/PrintConfig.cpp:2907 #: src/libslic3r/PrintConfig.cpp:3129 src/libslic3r/PrintConfig.cpp:3231 #: src/libslic3r/PrintConfig.cpp:3466 src/libslic3r/PrintConfig.cpp:3951 msgid "°" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:367 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:571 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1232 msgid "Move cut plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:508 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:528 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1602 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1211 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1977 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:370 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:529 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:664 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:665 msgid "in" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:544 msgid "Value" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:549 msgid "Tolerance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:865 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:868 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:869 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1260 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1263 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1264 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:865 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2348 msgid "Add connector" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:866 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1261 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:866 msgid "Remove connector" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:867 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1262 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:867 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1216 msgid "Move connector" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:868 msgid "Add connector to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:869 msgid "Remove connector from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:870 msgid "Select all connectors" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:894 src/libslic3r/PrintConfig.cpp:4644 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1227 msgid "Rotate cut plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1448 msgid "Render cut plane as circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1537 msgid "Connectors" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1541 msgid "Remove connectors" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1550 msgid "Type" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1561 src/libslic3r/PrintConfig.cpp:2816 msgid "Style" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1568 msgid "Depth ratio" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1586 msgid "Confirm connectors" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1652 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1666 msgid "Flip cut plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1710 msgid "Hold SHIFT key to draw a cut line" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1716 msgid "Cut position: " msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1725 msgid "Reset cutting plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1737 msgid "Edit connectors" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1737 msgid "Add connectors" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1744 msgid "Reset cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1745 msgid "Reset cutting plane and remove connectors" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1800 msgid "After cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1820 msgid "Cut to" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1823 msgid "Objects" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1826 msgid "Parts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1840 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1930 msgid "Invalid connectors detected" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1932 #, possible-c-format, possible-boost-format msgid "%1$d connector is out of cut contour" msgid_plural "%1$d connectors are out of cut contour" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1935 #, possible-c-format, possible-boost-format msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1938 msgid "Some connectors are overlapped" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1942 msgid "" "Invalid state. \n" "No one part is selected for keep after cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1944 msgid "" "Warning state. \n" "Cut plane is placed out of object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2153 msgid "Connector" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2183 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2323 msgid "Cut by line" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2373 msgid "Delete connector" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:252 msgid "Entering Cut gizmo" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:253 msgid "Leaving Cut gizmo" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:254 msgid "Cut gizmo editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:601 msgid "Emboss" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:866 msgid "ERROR: Wait until ends or Cancel process." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:921 msgid "Text-Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:953 msgid "Font" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:954 #: src/libslic3r/PrintConfig.cpp:897 msgid "Height" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:955 msgid "Depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:963 msgid "Use surface" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:964 msgid "Char gap" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:965 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1653 msgid "Line gap" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:966 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1651 msgid "Boldness" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:967 msgid "Skew ratio" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:968 msgid "Z-move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:969 msgid "Z-rot" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:970 msgid "Collection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1047 msgid "NORMAL" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1048 msgid "SMALL" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1049 msgid "ITALIC" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1050 msgid "SWISS" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1051 msgid "MODERN" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1088 msgid "First font" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1093 msgid "Default font" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1098 msgid "Embossed text" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1513 msgid "Warning: No font is selected. Select correct one." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1531 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1437 #: src/slic3r/GUI/Tab.cpp:1472 src/slic3r/GUI/Tab.cpp:1607 #: src/slic3r/GUI/Tab.cpp:1611 src/slic3r/GUI/Tab.cpp:2001 #: src/slic3r/GUI/Tab.cpp:2390 src/slic3r/GUI/Tab.cpp:4985 #: src/libslic3r/PrintConfig.cpp:276 src/libslic3r/PrintConfig.cpp:514 #: src/libslic3r/PrintConfig.cpp:1484 src/libslic3r/PrintConfig.cpp:1566 #: src/libslic3r/PrintConfig.cpp:1613 src/libslic3r/PrintConfig.cpp:2562 #: src/libslic3r/PrintConfig.cpp:2572 src/libslic3r/PrintConfig.cpp:3166 #: src/libslic3r/PrintConfig.cpp:3200 src/libslic3r/PrintConfig.cpp:3211 #: src/libslic3r/PrintConfig.cpp:3226 src/libslic3r/PrintConfig.cpp:3239 #: src/libslic3r/PrintConfig.cpp:3248 src/libslic3r/PrintConfig.cpp:3260 #: src/libslic3r/PrintConfig.cpp:3642 msgid "Advanced" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1631 msgid "Can't write text by selected font." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1632 msgid "Try to choose another font." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1645 msgid "Empty" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1645 msgid "Embossed text can NOT contain only white spaces." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1647 msgid "Bad symbol" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1647 msgid "Text contain character glyph (represented by '?') unknown by font." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1650 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:535 msgid "Skew" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1650 msgid "Unsupported visualization of font skew for text input." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1651 msgid "Unsupported visualization of font boldness for text input." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1653 msgid "Unsupported visualization of gap between lines inside text input." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1657 msgid "Too tall" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1657 msgid "Diminished font height inside text input." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1659 msgid "Too small" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1659 msgid "Enlarged font height inside text input." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1660 #, possible-boost-format msgid "%1% is NOT shown." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1964 msgid " No symbol" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1965 msgid " ... Loading" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2015 msgid " ... In queue" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2132 #, possible-boost-format msgid "Font face \"%1%\" can't be selected." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2180 #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:754 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:367 msgid "Apply" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2192 msgid "add file with font(.ttf, .ttc)" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2202 msgid "Open dialog for choose from fonts." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2210 msgid "Text is to object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2224 msgid "Added" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2227 msgid "Click to change text into object part." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2230 #: src/slic3r/GUI/GUI_ObjectList.cpp:4321 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2231 msgid "Subtracted" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2237 msgid "Click to change part type into negative volume." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2243 #: src/slic3r/GUI/GUI_ObjectList.cpp:4338 msgid "Modifier" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2249 msgid "Click to change part type into modifier." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2256 msgid "Change Text Type" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2287 #, possible-boost-format msgid "Rename style(%1%) for embossing text: " msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2299 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2384 msgid "Name can't be empty." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2301 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2386 msgid "Name has to be unique." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2310 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2397 msgid "ok" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2312 #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2401 msgid "cancel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2337 msgid "Rename style" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2344 msgid "Rename current style." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2345 msgid "Can't rename temporary style." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2362 msgid "First Add style to list." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2364 #, possible-boost-format msgid "Save %1% style" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2366 msgid "No changes to save." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2373 msgid "New name of style: " msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2422 msgid "Save as new style" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2434 msgid "Only valid font can be added to style." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2436 msgid "Add style to my list." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2438 msgid "Add as new named style." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2454 msgid "Remove style" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2485 #, possible-boost-format msgid "Delete \"%1%\" style." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2486 #, possible-boost-format msgid "Can't delete \"%1%\". It is last style." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2487 #, possible-boost-format msgid "Can't delete temporary style \"%1%\"." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2494 #, possible-boost-format msgid "" "Are you sure,\n" "that you want permanently and unrecoverable \n" "remove style \"%1%\"?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2496 msgid "Yes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2505 msgid "No" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2555 msgid "Presets" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2564 src/slic3r/GUI/GUI_App.cpp:2324 msgid "modified" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2617 #, possible-boost-format msgid "Modified style \"%1%\"" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2618 #, possible-boost-format msgid "Current style is \"%1%\"" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2625 msgid "Style modification will be lost." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2627 #, possible-boost-format msgid "" "Changing style to '%1%' will discard current style modification.\n" "\n" " Would you like to continue anyway?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2643 msgid "Not valid style." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2644 #, possible-boost-format msgid "Style '%1%' can't be used and will be removed from list." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2691 msgid "Unset italic" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2708 msgid "Set italic" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2738 msgid "Unset bold" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2756 msgid "Set bold" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2922 msgid "WxFont is not loaded properly." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2957 msgid "Revert font changes." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2991 msgid "wx Make bold" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3002 msgid "Revert text size." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3029 msgid "Revert embossed depth." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3178 msgid "" "Advanced font options could be changed only for correct font.\n" "Start with select correct font." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3219 msgid "Revert using of model surface." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3232 msgid "font points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3241 msgid "Revert gap between letters" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3242 msgid "Distance between letters" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3257 msgid "Revert gap between lines" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3258 msgid "Distance between lines" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3272 msgid "Undo boldness" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3273 msgid "Tiny / Wide glyphs" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3283 msgid "Undo letter's skew" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3284 msgid "Italic strength ratio" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3304 msgid "Undo translation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3305 msgid "Distance of the center of text from model surface" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3350 msgid "Undo rotation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3352 msgid "Rotate text Clock-wise." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3386 msgid "Select from True Type Collection." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3395 msgid "Set text to face camera" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3402 msgid "Use camera direction for text orientation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3486 #, possible-boost-format msgid "Font '%1%' can't be used. Please select another." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3488 msgid "Selected font is NOT True-type." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3512 msgid "Choose one or more files (TTF, TTC):" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3539 msgid "Choose SVG file:" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3600 #, possible-boost-format msgid "" "Can't load exactly same font(\"%1%\"), Aplication selected a similar " "one(\"%2%\"). You have to specify font for enable edit text." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:81 msgid "Enter emboss gizmo" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:82 msgid "Leave emboss gizmo" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:83 msgid "Embossing actions" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:37 #: src/slic3r/GUI/ObjectDataViewModel.cpp:66 msgid "Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46 msgid "Automatic painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47 msgid "painting..." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:107 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:106 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:108 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33 msgid "Brush size" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:109 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34 msgid "Brush shape" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1816 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:110 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35 msgid "Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53 msgid "Enforce supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37 msgid "Right mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:573 msgid "Block supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39 msgid "Shift + Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:568 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:247 msgid "Remove selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41 msgid "Remove all selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43 #: src/slic3r/GUI/GUI_Factories.cpp:481 msgid "Sphere" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:106 #: src/libslic3r/PrintConfig.cpp:1231 msgid "Triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62 msgid "Highlight overhang by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:63 msgid "Enforce" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121 msgid "Tool type" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122 msgid "Brush" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:68 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123 msgid "Smart fill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:70 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126 msgid "Smart fill angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:72 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127 msgid "Split triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:73 msgid "On overhangs only" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:187 #, possible-boost-format msgid "" "Preselects faces by overhang angle. It is possible to restrict paintable " "facets to only preselected faces when the option \"%1%\" is enabled." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:230 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:371 msgid "Paints facets according to the chosen painting brush." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:238 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:384 msgid "" "Paints neighboring facets whose relative angle is less or equal to set angle." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242 #, possible-boost-format msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:257 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:412 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141 msgid "Paints all facets inside, regardless of their orientation." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:266 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:421 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:149 msgid "Ignores facets facing away from the camera." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:275 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:430 msgid "Paints only one facet." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:283 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:298 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:438 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:455 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:129 msgid "Alt + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:288 msgid "Splits bigger facets into smaller ones while the object is painted." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:321 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:476 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:167 msgid "Ctrl + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:326 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:481 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:172 msgid "Reset selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:382 msgid "Block supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:383 msgid "Add supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:524 msgid "Automatic painting requires valid print setup." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:535 msgid "Automatic painting will erase all currently painted areas." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:536 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1118 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:540 msgid "Automatic painting support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:571 msgid "Add supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:22 msgid "Entering Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:23 msgid "Leaving Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:24 msgid "Paint-on supports editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:88 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:29 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33 #: src/libslic3r/PrintConfig.cpp:4037 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:242 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:361 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:655 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:739 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:827 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:869 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:64 msgid "No feature" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:65 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:76 msgid "Vertex" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:66 msgid "Edge" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:68 msgid "Plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:77 msgid "Point on edge" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:78 msgid "Point on circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:79 msgid "Point on plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:89 msgid "Center of edge" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:90 msgid "Center of circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:554 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2029 msgid "Measure" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1236 msgid "Edit to scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1258 #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:161 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:236 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:776 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:794 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:817 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:831 #: src/libslic3r/PrintConfig.cpp:4713 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1362 msgctxt "Verb" msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1541 msgid "##angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1740 msgid "Measure tool debug" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1824 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1851 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1857 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1886 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1893 msgid "Unselect feature" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1830 msgid "Unselect center" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1835 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1862 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1898 msgid "Select center" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1840 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1867 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1903 msgid "Unselect point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1846 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1873 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1878 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1910 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1915 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1923 msgid "Select feature" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1878 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1915 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1923 msgid "Select point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1940 msgid "Shift" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1940 msgid "Enable point selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1945 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2007 msgid "Restart selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1952 msgid "Esc" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1955 msgid "Unselect" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1999 #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2001 msgid "Selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2021 #: src/slic3r/GUI/KBShortcutsDialog.cpp:108 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2038 msgid "Angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2052 msgid "Perpendicular distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2052 msgid "Distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2062 msgid "Direct distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2072 msgid "Distance XYZ" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:163 msgid "Entering Measure gizmo" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:164 msgid "Leaving Measure gizmo" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:165 msgid "Measure gizmo editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:28 #, possible-boost-format msgid "" "Your printer has more extruders than the multi-material painting gizmo " "supports. For this reason, only the first %1% extruders will be able to be " "used for painting." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:46 #: src/slic3r/GUI/ObjectDataViewModel.cpp:69 msgid "Multimaterial painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111 msgid "First color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113 msgid "Second color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:642 msgid "Remove painted color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116 msgid "Clear all" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124 msgid "Bucket fill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:397 msgid "Paints neighboring facets that have the same color." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:443 msgid "Split bigger facets into smaller ones while the object is painted." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:645 #, possible-boost-format msgid "Painted using: Extruder %1%" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:118 msgid "Entering Multimaterial painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:119 msgid "Leaving Multimaterial painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:120 msgid "Multimaterial painting editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:76 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:643 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:745 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:775 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:813 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:830 #: src/libslic3r/PrintConfig.cpp:4698 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:707 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:194 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:250 msgid "Enforce seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:252 msgid "Block seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52 msgid "Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:23 msgid "Entering Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:24 msgid "Leaving Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:25 msgid "Paint-on seam editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:105 msgid "Mesh name" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:107 msgid "Detail level" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:108 msgid "Decimate ratio" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:147 #, possible-boost-format msgid "" "Processing model '%1%' with more than 1M triangles could be slow. It is " "highly recommended to reduce amount of triangles." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:150 #: src/slic3r/GUI/GUI_Factories.cpp:789 msgid "Simplify model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:177 msgid "Simplify" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:190 msgid "Simplification is currently only allowed when a single part is selected" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:191 #: src/slic3r/GUI/MainFrame.cpp:1246 src/slic3r/GUI/MainFrame.cpp:1716 #: src/slic3r/GUI/PrintHostDialogs.cpp:425 msgid "Error" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:294 msgid "Extra high" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:295 msgid "High" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:296 msgid "Medium" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:297 msgid "Low" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:298 msgid "Extra low" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:322 #, possible-boost-format msgid "" "Multipart object can be simplified only by %1%. If you want specify %2% " "process it separately." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:352 #, possible-c-format, possible-boost-format msgid "%d triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:355 msgid "Show wireframe" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:361 msgid "Operation already cancelling. Please wait few seconds." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:370 msgid "Can't apply when proccess preview." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:377 #, possible-boost-format msgid "Process %1% / 100" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:542 msgid "Simplify " msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:543 msgid "" "Custom supports, seams and multimaterial painting were removed after " "simplifying the mesh." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:67 msgid "Entering SLA support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:68 msgid "Leaving SLA support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:35 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:36 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:37 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:38 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1272 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42 #: src/libslic3r/PrintConfig.cpp:3867 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1274 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:307 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:460 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:626 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:696 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:806 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:814 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:815 msgid "Save support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:880 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:987 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1117 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1124 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1242 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1260 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1261 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1262 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1263 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1264 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1273 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:204 msgid "" "ERROR: Please close all manipulators available from the left toolbar first" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:998 msgid "" "You are currently editing SLA support points. Please, apply or discard your " "changes first." msgstr "" #: src/slic3r/GUI/GUI.cpp:287 msgid "Undefined" msgstr "" #: src/slic3r/GUI/GUI.cpp:308 #, possible-boost-format msgid "%1% was substituted with %2%" msgstr "" #: src/slic3r/GUI/GUI.cpp:317 msgid "" "Most likely the configuration was produced by a newer version of PrusaSlicer " "or by some PrusaSlicer fork." msgstr "" #: src/slic3r/GUI/GUI.cpp:318 msgid "The following values were substituted:" msgstr "" #: src/slic3r/GUI/GUI.cpp:319 msgid "Review the substitutions and adjust them if needed." msgstr "" #: src/slic3r/GUI/GUI.cpp:329 src/slic3r/GUI/Plater.cpp:850 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/GUI.cpp:333 src/slic3r/GUI/PhysicalPrinterDialog.cpp:158 msgid "Physical Printer" msgstr "" #: src/slic3r/GUI/GUI.cpp:346 msgid "" "Configuration bundle was loaded, however some configuration values were not " "recognized." msgstr "" #: src/slic3r/GUI/GUI.cpp:356 #, possible-boost-format msgid "" "Configuration file \"%1%\" was loaded, however some configuration values " "were not recognized." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:275 msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:276 msgid "Developed by Prusa Research." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:278 msgid "" "Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas " "Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:279 msgid "Artwork model by Creative Tools" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:420 #, possible-boost-format msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " "(according to XDG Base Directory Specification) to \n" "%2%.\n" "\n" "This directory did not exist yet (maybe you run the new version for the " "first time).\n" "However, an old %1% configuration directory was detected in \n" "%3%.\n" "\n" "Consider moving the contents of the old directory to the new location in " "order to access your profiles, etc.\n" "Note that if you decide to downgrade %1% in future, it will use the old " "location again.\n" "\n" "What do you want to do now?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:428 #, possible-c-format, possible-boost-format msgid "%s - BREAKING CHANGE" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:430 msgid "Quit, I will move my data now" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:430 msgid "Start the application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:725 #, possible-c-format, possible-boost-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:728 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:732 msgid "" "PrusaSlicer has encountered a localization error. Please report to " "PrusaSlicer team, what language was active and in which scenario this issue " "happened. Thank you.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:735 msgid "Critical error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:740 #, possible-boost-format msgid "Internal error: %1%" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:954 src/slic3r/GUI/GUI_App.cpp:1051 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:960 src/slic3r/GUI/GUI_App.cpp:1057 msgid "" "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1006 #, possible-boost-format msgid "You are opening %1% version %2%." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1009 #, possible-boost-format msgid "" "The active configuration was created by %1% %2%,\n" "while a newer configuration was found in %3%\n" "created by %1% %4%.\n" "\n" "Shall the newer configuration be imported?\n" "If so, your active configuration will be backed up before importing the new " "configuration." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1017 #, possible-boost-format msgid "" "An existing configuration was found in %3%\n" "created by %1% %2%.\n" "\n" "Shall this configuration be imported?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1025 msgid "Import" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1026 msgid "Don't import" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1034 msgid "Continue and import newer configuration?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1095 msgid "" "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n" "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM " "available in the system.\n" "Please download and install a 64 bit build of PrusaSlicer from https://www." "prusa3d.cz/prusaslicer/.\n" "Do you wish to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1182 #, possible-c-format, possible-boost-format msgid "" "%s\n" "Do you want to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1184 src/slic3r/GUI/GUI_App.cpp:3302 #: src/slic3r/GUI/Plater.cpp:1736 src/slic3r/GUI/UnsavedChangesDialog.cpp:917 msgid "Remember my choice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1226 msgid "Loading configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1257 #, possible-boost-format msgid "New prerelease version %1% is available." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1258 msgid "See Releases page." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1313 msgid "Preparing settings tabs" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1393 src/slic3r/GUI/Preferences.cpp:405 msgid "Restore window position on start" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1395 msgid "PrusaSlicer started after a crash" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1396 #, possible-boost-format msgid "" "PrusaSlicer crashed last time when attempting to set window position.\n" "We are sorry for the inconvenience, it unfortunately happens with certain " "multiple-monitor setups.\n" "More precise reason for the crash: \"%1%\".\n" "For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n" "\n" "To avoid this problem, consider disabling \"%4%\" in \"Preferences\". " "Otherwise, the application will most likely crash again next time." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1408 #, possible-boost-format msgid "Disable \"%1%\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1409 #, possible-boost-format msgid "Leave \"%1%\" enabled" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1780 msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1784 msgid "" "But since this version of PrusaSlicer we don't show this information in " "Printer Settings anymore.\n" "Settings will be available in physical printers settings." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1786 msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1790 src/slic3r/GUI/PhysicalPrinterDialog.cpp:798 msgid "Information" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1803 src/slic3r/GUI/GUI_App.cpp:1814 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1817 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1822 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1961 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1973 msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1984 msgid "Choose ZIP file:" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1996 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2007 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2148 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2148 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2363 msgid "" "Simple mode supports manipulation with single-part object(s)\n" "or object(s) with support modifiers only." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2365 msgid "Please check your object list before mode changing." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2366 msgid "Change application mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2397 #, possible-c-format, possible-boost-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2401 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2401 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2402 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2402 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2403 msgid "Check for Configuration Updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2403 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2404 msgid "Check for Application Updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2404 msgid "Check for new version of application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2411 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2417 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2422 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2424 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2425 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2430 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2430 #, possible-c-format, possible-boost-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2433 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2436 msgid "Flash Printer &Firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2436 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2459 msgid "Taking a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2460 msgid "" "Some presets are modified and the unsaved changes will not be captured by " "the configuration snapshot." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2461 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2477 msgid "Loading a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2486 #, possible-boost-format msgid "Continue to activate a configuration snapshot %1%?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2500 msgid "Failed to activate configuration snapshot." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2520 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2523 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2525 src/slic3r/GUI/Preferences.cpp:730 #: src/slic3r/GUI/Selection.cpp:1695 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2552 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2560 msgid "Restart application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2726 msgid "For new project all modifications will be reseted" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2764 msgid "Loading a new project while the current project is modified." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2767 msgid "Project is loading" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2767 msgid "Opening new project while some presets are unsaved." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2786 msgid "The uploads are still ongoing" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2786 msgid "Stop them and continue anyway?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2790 msgid "Ongoing uploads" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3026 msgid "" "It's impossible to print object(s) which contains parameter modifiers with " "SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3027 src/slic3r/GUI/Jobs/SLAImportJob.cpp:149 #: src/slic3r/GUI/Plater.cpp:2536 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3070 msgid "Configuration is editing from ConfigWizard" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3088 #, possible-boost-format msgid "Welcome to %1% version %2%." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3090 #, possible-boost-format msgid "" "Do you wish to register downloads from Printables.com\n" "for this %1% %2% executable?\n" "\n" "Downloads can be registered for only 1 executable at time." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3118 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3301 src/slic3r/GUI/GUI_App.cpp:3324 msgid "Open hyperlink in default browser?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3301 src/slic3r/GUI/GUI_App.cpp:3324 msgid "PrusaSlicer: Open hyperlink" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3306 src/slic3r/GUI/Preferences.cpp:593 msgid "Suppress to open hyperlink in browser" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3308 src/slic3r/GUI/Plater.cpp:1742 msgid "PrusaSlicer will remember your choice." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3309 msgid "You will not be asked about it again on hyperlinks hovering." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3310 src/slic3r/GUI/Plater.cpp:1746 #, possible-boost-format msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to changes your choice." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3312 src/slic3r/GUI/Plater.cpp:1748 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:934 msgid "PrusaSlicer: Don't ask me again" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3386 msgid "Check for application update has failed." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3387 #, possible-boost-format msgid "No new version is available. Latest release version is %1%." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3458 msgid "Download of new version is already ongoing. Do you wish to continue?" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:64 src/slic3r/GUI/GUI_Init.cpp:67 msgid "PrusaSlicer GUI initialization failed" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:67 #, possible-boost-format msgid "Fatal error, exception catched: %1%" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127 #: src/libslic3r/PrintConfig.cpp:300 src/libslic3r/PrintConfig.cpp:423 #: src/libslic3r/PrintConfig.cpp:466 src/libslic3r/PrintConfig.cpp:475 #: src/libslic3r/PrintConfig.cpp:864 src/libslic3r/PrintConfig.cpp:872 #: src/libslic3r/PrintConfig.cpp:881 src/libslic3r/PrintConfig.cpp:1292 #: src/libslic3r/PrintConfig.cpp:1376 src/libslic3r/PrintConfig.cpp:1604 #: src/libslic3r/PrintConfig.cpp:1985 src/libslic3r/PrintConfig.cpp:2060 #: src/libslic3r/PrintConfig.cpp:2294 src/libslic3r/PrintConfig.cpp:2938 #: src/libslic3r/PrintConfig.cpp:2946 src/libslic3r/PrintConfig.cpp:3006 #: src/libslic3r/PrintConfig.cpp:3015 src/libslic3r/PrintConfig.cpp:3186 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131 #: src/slic3r/GUI/Tab.cpp:1494 src/slic3r/GUI/Tab.cpp:1496 #: src/libslic3r/PrintConfig.cpp:773 src/libslic3r/PrintConfig.cpp:2125 #: src/libslic3r/PrintConfig.cpp:2134 src/libslic3r/PrintConfig.cpp:2143 #: src/libslic3r/PrintConfig.cpp:2153 src/libslic3r/PrintConfig.cpp:2162 #: src/libslic3r/PrintConfig.cpp:2584 src/libslic3r/PrintConfig.cpp:2590 #: src/libslic3r/PrintConfig.cpp:2598 src/libslic3r/PrintConfig.cpp:2611 #: src/libslic3r/PrintConfig.cpp:2621 src/libslic3r/PrintConfig.cpp:2628 #: src/libslic3r/PrintConfig.cpp:2644 src/libslic3r/PrintConfig.cpp:2660 #: src/libslic3r/PrintConfig.cpp:2681 src/libslic3r/PrintConfig.cpp:2694 #: src/libslic3r/PrintConfig.cpp:2710 src/libslic3r/PrintConfig.cpp:2725 #: src/libslic3r/PrintConfig.cpp:2743 src/libslic3r/PrintConfig.cpp:2753 #: src/libslic3r/PrintConfig.cpp:2762 src/libslic3r/PrintConfig.cpp:2773 #: src/libslic3r/PrintConfig.cpp:2785 src/libslic3r/PrintConfig.cpp:2799 #: src/libslic3r/PrintConfig.cpp:2807 src/libslic3r/PrintConfig.cpp:2808 #: src/libslic3r/PrintConfig.cpp:2817 src/libslic3r/PrintConfig.cpp:2831 #: src/libslic3r/PrintConfig.cpp:2840 src/libslic3r/PrintConfig.cpp:2854 #: src/libslic3r/PrintConfig.cpp:2862 src/libslic3r/PrintConfig.cpp:2873 #: src/libslic3r/PrintConfig.cpp:2884 src/libslic3r/PrintConfig.cpp:2893 #: src/libslic3r/PrintConfig.cpp:2903 src/libslic3r/PrintConfig.cpp:2915 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135 #: src/libslic3r/PrintConfig.cpp:3142 src/libslic3r/PrintConfig.cpp:3150 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:65 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/Tab.cpp:1460 #: src/libslic3r/PrintConfig.cpp:1620 src/libslic3r/PrintConfig.cpp:1626 #: src/libslic3r/PrintConfig.cpp:1638 src/libslic3r/PrintConfig.cpp:1648 #: src/libslic3r/PrintConfig.cpp:1656 src/libslic3r/PrintConfig.cpp:1658 msgid "Ironing" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1343 #: src/libslic3r/PrintConfig.cpp:1344 src/libslic3r/PrintConfig.cpp:1356 #: src/libslic3r/PrintConfig.cpp:1366 msgid "Fuzzy Skin" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/Tab.cpp:1536 #: src/libslic3r/PrintConfig.cpp:526 src/libslic3r/PrintConfig.cpp:536 #: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:557 #: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:575 #: src/libslic3r/PrintConfig.cpp:852 src/libslic3r/PrintConfig.cpp:1383 #: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:1657 #: src/libslic3r/PrintConfig.cpp:2050 src/libslic3r/PrintConfig.cpp:2383 #: src/libslic3r/PrintConfig.cpp:2436 src/libslic3r/PrintConfig.cpp:2991 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1585 #: src/slic3r/GUI/Tab.cpp:2288 src/libslic3r/PrintConfig.cpp:889 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2027 #: src/libslic3r/PrintConfig.cpp:2404 src/libslic3r/PrintConfig.cpp:2673 #: src/libslic3r/PrintConfig.cpp:2701 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:840 #: src/libslic3r/PrintConfig.cpp:953 src/libslic3r/PrintConfig.cpp:1278 #: src/libslic3r/PrintConfig.cpp:1538 src/libslic3r/PrintConfig.cpp:2036 #: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2682 #: src/libslic3r/PrintConfig.cpp:2978 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1480 #: src/libslic3r/PrintConfig.cpp:631 src/libslic3r/PrintConfig.cpp:642 #: src/libslic3r/PrintConfig.cpp:655 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:435 #: src/slic3r/GUI/Tab.cpp:4946 src/slic3r/GUI/Tab.cpp:4948 #: src/libslic3r/PrintConfig.cpp:3328 src/libslic3r/PrintConfig.cpp:3337 #: src/libslic3r/PrintConfig.cpp:3346 src/libslic3r/PrintConfig.cpp:3356 #: src/libslic3r/PrintConfig.cpp:3366 src/libslic3r/PrintConfig.cpp:3387 #: src/libslic3r/PrintConfig.cpp:3410 src/libslic3r/PrintConfig.cpp:3417 #: src/libslic3r/PrintConfig.cpp:3432 src/libslic3r/PrintConfig.cpp:3442 #: src/libslic3r/PrintConfig.cpp:3451 src/libslic3r/PrintConfig.cpp:3464 #: src/libslic3r/PrintConfig.cpp:3474 src/libslic3r/PrintConfig.cpp:3488 #: src/libslic3r/PrintConfig.cpp:3498 src/libslic3r/PrintConfig.cpp:3841 #: src/libslic3r/PrintConfig.cpp:3861 src/libslic3r/PrintConfig.cpp:3868 #: src/libslic3r/PrintConfig.cpp:3876 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:590 #: src/slic3r/GUI/Tab.cpp:4960 src/slic3r/GUI/Tab.cpp:4961 #: src/slic3r/GUI/Tab.cpp:5026 src/libslic3r/PrintConfig.cpp:3884 #: src/libslic3r/PrintConfig.cpp:3891 src/libslic3r/PrintConfig.cpp:3905 #: src/libslic3r/PrintConfig.cpp:3916 src/libslic3r/PrintConfig.cpp:3926 #: src/libslic3r/PrintConfig.cpp:3948 src/libslic3r/PrintConfig.cpp:3959 #: src/libslic3r/PrintConfig.cpp:3966 src/libslic3r/PrintConfig.cpp:3973 #: src/libslic3r/PrintConfig.cpp:3984 src/libslic3r/PrintConfig.cpp:3993 #: src/libslic3r/PrintConfig.cpp:4002 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4978 #: src/slic3r/GUI/Tab.cpp:4979 src/libslic3r/SLA/Hollowing.cpp:86 #: src/libslic3r/SLA/Hollowing.cpp:91 src/libslic3r/SLA/Hollowing.cpp:106 #: src/libslic3r/SLA/Hollowing.cpp:115 src/libslic3r/PrintConfig.cpp:4012 #: src/libslic3r/PrintConfig.cpp:4019 src/libslic3r/PrintConfig.cpp:4029 #: src/libslic3r/PrintConfig.cpp:4038 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:159 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:160 msgid "Add negative volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:161 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:162 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:163 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:169 msgid "Add text" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:170 msgid "Add negative text" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:171 msgid "Add text modifier" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:307 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:414 src/slic3r/GUI/GUI_Factories.cpp:419 #: src/slic3r/GUI/GUI_Factories.cpp:625 src/slic3r/GUI/GUI_Factories.cpp:631 #, possible-c-format, possible-boost-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:460 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:475 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:481 src/slic3r/GUI/GUI_Factories.cpp:566 #: src/slic3r/GUI/GUI_Factories.cpp:570 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:481 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:481 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:493 msgid "Gallery" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:529 src/slic3r/GUI/GUI_Factories.cpp:549 #: src/slic3r/GUI/GUI_ObjectList.cpp:660 msgid "Text" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:555 src/slic3r/GUI/GUI_Factories.cpp:558 #: src/slic3r/GUI/GUI_Factories.cpp:595 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:604 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:695 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:705 src/slic3r/GUI/GUI_Factories.cpp:717 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:717 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:727 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:755 src/slic3r/GUI/GUI_ObjectList.cpp:2070 #: src/slic3r/GUI/GUI_ObjectList.cpp:2582 msgid "Invalidate cut info" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:770 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:780 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:799 msgid "Export as STL/OBJ" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:810 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:817 src/slic3r/GUI/Plater.cpp:3602 msgid "Replace with STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:817 msgid "Replace the selected volume with new STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:824 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:862 src/slic3r/Utils/Repetier.cpp:145 #: src/slic3r/Utils/Repetier.cpp:226 src/libslic3r/PrintConfig.cpp:738 #: src/libslic3r/PrintConfig.cpp:2790 src/libslic3r/PrintConfig.cpp:3851 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:879 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:879 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:921 src/slic3r/GUI/Plater.cpp:6213 msgid "Convert from imperial units" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:922 src/slic3r/GUI/Plater.cpp:6214 msgid "Revert conversion from imperial units" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:923 src/slic3r/GUI/Plater.cpp:6215 msgid "Convert from meters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:924 src/slic3r/GUI/Plater.cpp:6215 msgid "Revert conversion from meters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:945 src/slic3r/GUI/GUI_ObjectList.cpp:2290 #: src/libslic3r/PrintConfig.cpp:4689 msgid "Merge" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:945 msgid "Merge objects to the one multipart object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:964 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:964 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:966 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:966 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:968 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:968 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:971 msgid "Mirror" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:971 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:977 msgid "Edit text" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:999 msgid "Ability to change text, font, size, ..." msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1021 src/slic3r/GUI/GUI_ObjectList.cpp:1793 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1059 msgid "To objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1059 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1062 msgid "To parts" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1062 src/slic3r/GUI/GUI_Factories.cpp:1097 msgid "Split the selected object into individual parts" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1066 src/slic3r/GUI/GUI_Factories.cpp:1097 #: src/libslic3r/PrintConfig.cpp:4718 msgid "Split" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1066 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1225 src/slic3r/GUI/GUI_Factories.cpp:1243 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1225 msgid "Change the number of instances of the selected objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1237 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1240 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1243 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1247 msgid "Fill bed with instances" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1247 msgid "Fill the remaining area of bed with instances of the selected object" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:160 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:164 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:323 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:342 src/slic3r/GUI/GUI_ObjectList.cpp:513 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:423 msgid "Wrong volume index " msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:433 msgid "No errors detected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:442 #, possible-c-format, possible-boost-format msgid "Auto-repaired %1$d error" msgid_plural "Auto-repaired %1$d errors" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:448 #, possible-c-format, possible-boost-format msgid "%1$d degenerate facet" msgid_plural "%1$d degenerate facets" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:450 #, possible-c-format, possible-boost-format msgid "%1$d edge fixed" msgid_plural "%1$d edges fixed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:452 #, possible-c-format, possible-boost-format msgid "%1$d facet removed" msgid_plural "%1$d facets removed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:454 #, possible-c-format, possible-boost-format msgid "%1$d facet reversed" msgid_plural "%1$d facets reversed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:456 #, possible-c-format, possible-boost-format msgid "%1$d backward edge" msgid_plural "%1$d backward edges" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:459 src/slic3r/GUI/GUI_ObjectList.cpp:462 #, possible-c-format, possible-boost-format msgid "%1$d open edge" msgid_plural "%1$d open edges" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:461 msgid "Remaining errors" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:469 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:515 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:517 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:521 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:523 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:649 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:669 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:669 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1307 #: src/slic3r/GUI/GUI_ObjectList.cpp:4589 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1313 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1313 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1363 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1364 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1365 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1404 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1405 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1406 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1486 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1486 msgid "Load Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1582 src/slic3r/GUI/Plater.cpp:2453 msgid "Loading" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1617 src/slic3r/GUI/Plater.cpp:2494 msgid "Loading file" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1625 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1721 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1761 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1826 msgid "Add Shape from Gallery" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1826 msgid "Add Shapes from Gallery" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1945 msgid "Remove paint-on supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1952 msgid "Remove paint-on seam" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1966 msgid "Remove Multi Material painting" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1972 msgid "Shift objects to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1978 msgid "Remove variable layer height" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1999 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2023 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2039 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2057 msgid "Delete connector from object which is a part of cut" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2058 msgid "Delete solid part from object which is a part of cut" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2059 msgid "Delete negative volume from object which is a part of cut" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2061 msgid "" "To save cut information you can delete all connectors from all related " "objects." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2064 msgid "" "This action will break a cut information.\n" "After that PrusaSlicer can't guarantee model consistency.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " "cut infornation first." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2072 #: src/slic3r/GUI/GUI_ObjectList.cpp:2612 msgid "Delete all connectors" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2103 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2112 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2138 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2142 msgid "Instance cannot be deleted from cut object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2146 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2170 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2174 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2177 src/slic3r/GUI/Plater.cpp:3133 msgid "" "Custom supports, seams and multimaterial painting were removed after " "splitting the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2297 msgid "Merged" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2392 msgid "Merge all parts to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2424 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2695 msgid "Cut Connectors information" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2705 #: src/slic3r/GUI/GUI_ObjectList.cpp:2768 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2714 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1472 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2802 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2806 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2811 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2817 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2825 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2833 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2833 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3363 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3441 #: src/slic3r/GUI/GUI_ObjectList.cpp:3469 #: src/slic3r/GUI/GUI_ObjectList.cpp:3489 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3535 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3539 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" "The gap between the current layer range and the next layer range\n" "is thinner than the minimum layer height allowed." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3544 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3603 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3989 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4001 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4138 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4139 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4141 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4142 #, possible-c-format, possible-boost-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4143 #, possible-c-format, possible-boost-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4146 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4151 #: src/slic3r/GUI/GUI_ObjectList.cpp:4226 src/slic3r/GUI/Plater.cpp:197 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4331 msgid "Negative Volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4343 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4343 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4353 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4359 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4619 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4619 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4681 msgid "Repairing model" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4691 msgid "" "Custom supports, seams and multimaterial painting were removed after " "repairing the mesh." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4711 msgid "Fix through NetFabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4714 msgid "Fixing through NetFabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4744 msgid "The following model was repaired successfully" msgid_plural "The following models were repaired successfully" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4750 msgid "Folowing model repair failed" msgid_plural "Folowing models repair failed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4755 msgid "Repairing was canceled" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4869 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4990 msgid "Set Printable group" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4990 msgid "Set Unprintable group" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4992 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4992 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4993 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4993 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:61 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:96 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1132 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:97 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:67 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:157 src/libslic3r/GCode.cpp:491 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:221 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:710 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:222 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:711 #: src/slic3r/GUI/Mouse3DController.cpp:478 #: src/slic3r/GUI/Mouse3DController.cpp:499 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:239 msgid "Size [World]" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:275 msgid "Mirror along" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:275 #, possible-c-format, possible-boost-format msgid " %c " msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:275 msgid "axis" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:279 #, possible-c-format, possible-boost-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:329 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:374 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:387 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:393 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:401 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:414 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:428 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:445 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:490 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:516 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:519 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:539 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:546 msgid "Reset skew" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:553 msgid "Inches" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:712 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:740 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:752 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:793 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:801 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:811 msgid "Rotate (relative)" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:751 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:800 msgid "Translate (relative) [World]" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:829 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:905 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:980 msgid "Left handed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1133 msgid "Object coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1134 msgid "Part coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1176 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1220 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1351 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1368 msgid "Set Size" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1427 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1430 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:63 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:99 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:105 #, possible-c-format, possible-boost-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:154 #, possible-c-format, possible-boost-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:581 msgid "NOTE:" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:582 #, possible-boost-format msgid "Sliced object \"%1%\" looks like a logo or a sign" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:583 msgid "Apply color change automatically" msgstr "" #: src/slic3r/GUI/HintNotification.cpp:773 #: src/slic3r/GUI/HintNotification.cpp:799 #: src/slic3r/GUI/NotificationManager.cpp:457 #: src/slic3r/GUI/NotificationManager.cpp:474 msgid "More" msgstr "" #: src/slic3r/GUI/HintNotification.cpp:914 msgid "Open Preferences." msgstr "" #: src/slic3r/GUI/HintNotification.cpp:1006 msgid "Open Documentation in web browser." msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:666 msgid "Edit" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:1166 src/slic3r/GUI/Search.cpp:531 msgid "Use for search" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:1167 src/slic3r/GUI/Search.cpp:524 msgid "Category" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:1169 src/slic3r/GUI/Search.cpp:526 msgid "Search in English" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:168 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:204 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:205 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:225 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:265 #, possible-c-format, possible-boost-format msgid "" "Arrangement ignored the following objects which can't fit into a single " "bed:\n" "%s" msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:108 msgid "Filling bed" msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:140 msgid "Bed filling canceled." msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:141 msgid "Bed filling done." msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:148 src/slic3r/GUI/Jobs/EmbossJob.cpp:596 msgid "Can't create empty volume." msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:201 msgid "Can't create empty object." msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:208 msgid "Add Emboss text object" msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:247 msgid "Created text volume is empty. Change text or font." msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:465 msgid "" "It is used default volume for embossed text, try to change text or font to " "fix it." msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:549 #, possible-boost-format msgid "Text: %1%" msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:593 msgid "Bad object to create volume." msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:598 msgid "Add Emboss text Volume" msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:698 msgid "Font doesn't have any shape for given text." msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:738 msgid "There is no volume in projection direction." msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:787 msgid "There is no valid surface for text projection." msgstr "" #: src/slic3r/GUI/Jobs/EmbossJob.cpp:823 msgid "Issue during embossing the text." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:22 msgid "Best surface quality" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24 msgid "Optimize object rotation for best surface quality." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:25 msgid "Reduced overhang slopes" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:27 msgid "" "Optimize object rotation to have minimum amount of overhangs needing support " "structures.\n" "Note that this method will try to find the best surface of the object for " "touching the print bed if no elevation is set." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:31 msgid "Lowest Z height" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:33 msgid "Rotate the model to have the lowest z height for faster print time." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:53 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:83 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:84 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49 msgid "Importing SLA archive" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:77 msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:81 msgid "Import is unavailable for this archive format." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:86 msgid "Importing canceled." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:87 msgid "Importing done." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:108 msgid "The file does not exist." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135 msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:148 src/slic3r/GUI/Plater.cpp:2535 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:150 src/slic3r/GUI/Plater.cpp:2537 msgid "Attention!" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:166 msgid "The profile in the imported archive is corrupt and will not be loaded." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:178 msgid "" "No object could be retrieved from the archive. The slices might be corrupted " "or missing." msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1184 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:86 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 msgid "Open project AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:88 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:89 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:90 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:92 msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:93 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:94 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:96 src/slic3r/GUI/Plater.cpp:948 #: src/slic3r/GUI/Plater.cpp:7161 src/libslic3r/PrintConfig.cpp:4575 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:97 src/slic3r/GUI/Plater.cpp:7162 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:98 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:99 src/slic3r/GUI/Plater.cpp:931 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:100 msgid "Eject SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:102 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:103 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:104 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:111 #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 #: src/slic3r/GUI/KBShortcutsDialog.cpp:215 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:117 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:119 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:120 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:121 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 #: src/slic3r/GUI/PrintHostDialogs.cpp:267 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:124 src/slic3r/GUI/MainFrame.cpp:77 msgid "Open new instance" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:127 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:130 #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Preferences.cpp:57 #: src/slic3r/GUI/Preferences.cpp:165 src/slic3r/GUI/Preferences.cpp:188 #: src/slic3r/GUI/Preferences.cpp:207 src/slic3r/GUI/Preferences.cpp:215 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 #: src/slic3r/GUI/KBShortcutsDialog.cpp:239 #: src/slic3r/GUI/KBShortcutsDialog.cpp:254 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 #: src/slic3r/GUI/KBShortcutsDialog.cpp:240 #: src/slic3r/GUI/KBShortcutsDialog.cpp:255 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:150 #: src/slic3r/GUI/KBShortcutsDialog.cpp:225 #: src/slic3r/GUI/KBShortcutsDialog.cpp:241 #: src/slic3r/GUI/KBShortcutsDialog.cpp:252 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:150 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 #: src/slic3r/GUI/KBShortcutsDialog.cpp:242 #: src/slic3r/GUI/KBShortcutsDialog.cpp:253 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:157 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Gizmo FDM paint-on supports" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Gizmo FDM paint-on seam" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:165 msgid "Gizmo Multi Material painting" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Gizmo Text emboss / engrave" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:168 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:173 msgid "Switch between Editor/Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:174 msgid "Collapse/Expand the sidebar" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:176 msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:179 #: src/slic3r/GUI/KBShortcutsDialog.cpp:182 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:180 msgid "Minimize application" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:187 src/slic3r/GUI/MainFrame.cpp:329 #: src/slic3r/GUI/MainFrame.cpp:378 src/slic3r/GUI/MainFrame.cpp:490 #: src/slic3r/GUI/MainFrame.cpp:493 src/slic3r/GUI/MainFrame.cpp:515 #: src/slic3r/GUI/MainFrame.cpp:518 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:190 msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:191 msgid "Gizmo move: Press to snap by 1mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:192 msgid "Gizmo scale: Press to snap by 5%" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:193 msgid "Gizmo scale: Scale selection to fit print volume" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:194 msgid "Gizmo scale: Press to activate one direction scaling" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:195 msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:199 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:199 msgid "" "The following shortcuts are applicable when the specified gizmo is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:202 msgid "Set selected items as Printable/Unprintable" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:203 msgid "Set default extruder for the selected items" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:204 msgid "Set extruder number for the selected items" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 msgid "Objects List" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/MainFrame.cpp:1611 msgid "Open a G-code file" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:213 src/slic3r/GUI/MainFrame.cpp:1443 #: src/slic3r/GUI/MainFrame.cpp:1447 src/slic3r/GUI/MainFrame.cpp:1616 #: src/slic3r/GUI/MainFrame.cpp:1620 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 msgid "Vertical slider - Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 #: src/slic3r/GUI/KBShortcutsDialog.cpp:228 msgid "Vertical slider - Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:225 #: src/slic3r/GUI/KBShortcutsDialog.cpp:229 msgid "Horizontal slider - Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 msgid "Horizontal slider - Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:231 msgid "On/Off one layer mode of the vertical slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:232 msgid "Show/Hide legend" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 msgid "Show/Hide G-code window" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 src/slic3r/GUI/Plater.cpp:4562 #: src/slic3r/GUI/Tab.cpp:2736 msgid "Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:239 msgid "Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:240 msgid "Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:241 msgid "Set upper thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:242 msgid "Set lower thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:244 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:245 #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 #: src/slic3r/GUI/KBShortcutsDialog.cpp:256 #: src/slic3r/GUI/KBShortcutsDialog.cpp:257 msgid "" "Press to speed up 5 times while moving thumb\n" "with arrow keys or mouse wheel" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 msgid "Vertical Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 msgid "" "The following shortcuts are applicable in G-code preview when the vertical " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:252 msgid "Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:253 msgid "Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:254 msgid "Set left thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:255 msgid "Set right thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:260 msgid "Horizontal Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:260 msgid "" "The following shortcuts are applicable in G-code preview when the horizontal " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:284 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:91 #: src/slic3r/GUI/MainFrame.cpp:1503 msgid "Open a new PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:93 msgid "G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:1388 msgid "Open G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:91 src/slic3r/GUI/MainFrame.cpp:1627 msgid "Open PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:93 msgid "Open new G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:227 msgid "Closing PrusaSlicer. Current project is modified." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:234 msgid "PrusaSlicer is closing" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:234 msgid "Closing PrusaSlicer while some presets are modified." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:330 src/slic3r/GUI/MainFrame.cpp:380 #: src/slic3r/GUI/Tab.hpp:413 src/slic3r/GUI/Tab.hpp:539 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:384 #: src/slic3r/GUI/MainFrame.cpp:2196 src/slic3r/GUI/MainFrame.cpp:2197 #: src/slic3r/GUI/Tab.hpp:520 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:382 #: src/slic3r/GUI/MainFrame.cpp:2196 src/slic3r/GUI/MainFrame.cpp:2197 #: src/slic3r/GUI/Tab.hpp:448 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:332 src/slic3r/GUI/MainFrame.cpp:386 #: src/slic3r/GUI/Tab.hpp:488 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:685 src/slic3r/GUI/Plater.cpp:1728 #: src/slic3r/GUI/Plater.cpp:2879 msgid "Untitled" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:710 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1150 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1150 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1152 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1152 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1158 #, possible-c-format, possible-boost-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1159 #, possible-c-format, possible-boost-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1165 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1165 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1167 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1167 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1169 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1169 #, possible-c-format, possible-boost-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175 #, possible-c-format, possible-boost-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1177 msgid "Show Tip of the Day" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1181 msgid "" "Opens Tip of the day notification in bottom right corner or shows another " "tip if already opened." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1184 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1198 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1198 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1202 src/libslic3r/PrintConfig.cpp:3005 #: src/libslic3r/PrintConfig.cpp:3014 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1202 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1205 src/libslic3r/PrintConfig.cpp:465 #: src/libslic3r/PrintConfig.cpp:474 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1205 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1207 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1207 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1209 src/libslic3r/PrintConfig.cpp:2300 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1209 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1211 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1211 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1213 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1213 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1226 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1226 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1229 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1229 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1234 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1246 msgid "" "The selected project is no longer available.\n" "Do you want to remove it from the recent projects list?" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1270 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1270 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1284 msgid "Import STL/3MF/STEP/OBJ/AM&F" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1284 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1288 msgid "Import STL (Imperial Units)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1288 msgid "Load an model saved with imperial units" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1292 msgid "Import SLA Archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1292 msgid "Load an SLA archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1296 msgid "Import ZIP Achive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1296 msgid "Load a zip achive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1301 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1301 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1304 msgid "Import Config from &Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1304 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1308 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1308 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1311 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1314 src/slic3r/GUI/MainFrame.cpp:1676 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1314 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1318 src/slic3r/GUI/MainFrame.cpp:1677 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1318 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1322 msgid "Export G-code to SD Card / Flash Drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1322 msgid "Export current plate as G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1326 msgid "Export Plate as &STL/OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1326 msgid "Export current plate as STL/OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1329 msgid "Export Plate as STL/OBJ &Including Supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1329 msgid "Export current plate as STL/OBJ including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1624 msgid "Export &Toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1624 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1341 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1341 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1344 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1344 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1347 msgid "Export Config Bundle With Physical Printers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1347 msgid "Export all presets including physical printers to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1350 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1352 msgid "Ejec&t SD Card / Flash Drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1352 msgid "Eject SD card / Flash drive after the G-code was exported to it." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1360 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1360 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1366 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1366 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1372 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1372 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1380 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1380 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1384 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1384 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1388 msgid "&G-code Preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1392 msgid "E&xit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1392 src/slic3r/GUI/UpdateDialogs.cpp:376 #: src/slic3r/GUI/UpdateDialogs.cpp:423 #, possible-c-format, possible-boost-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1631 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1631 #, possible-c-format, possible-boost-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1410 msgid "&Select All" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1411 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1413 msgid "D&eselect All" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1414 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1417 msgid "&Delete Selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1418 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1420 msgid "Delete &All" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1421 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1425 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1428 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1433 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1434 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1436 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1437 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1442 src/slic3r/GUI/MainFrame.cpp:1446 #: src/slic3r/GUI/MainFrame.cpp:1615 src/slic3r/GUI/MainFrame.cpp:1619 msgid "Re&load from Disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1452 msgid "Searc&h" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1453 msgid "Search in settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1461 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1461 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1466 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1466 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1469 src/slic3r/GUI/MainFrame.cpp:1679 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1469 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1473 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1473 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1479 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1479 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1482 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1482 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1488 msgid "Open the dialog to modify shape gallery" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1499 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1499 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1503 msgid "Open New Instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1507 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1727 msgid "Compare Presets" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1507 msgid "Compare presets" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1517 msgid "Show &Labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1517 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1520 msgid "Show Legen&d" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1520 msgid "Show legend in preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1523 msgid "&Collapse Sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1523 src/slic3r/GUI/Plater.cpp:2347 msgid "Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1528 msgid "&Fullscreen" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1528 msgid "Fullscreen" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1543 src/slic3r/GUI/MainFrame.cpp:1650 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1544 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1545 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1546 src/slic3r/GUI/MainFrame.cpp:1651 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1549 src/slic3r/GUI/MainFrame.cpp:1654 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1611 msgid "&Open G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1627 msgid "Open &PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1641 msgid "Show legen&d" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1641 msgid "Show legend" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1676 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1677 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1679 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1703 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1715 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1722 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1722 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1723 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1758 #, possible-c-format, possible-boost-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1758 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1758 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1770 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1779 src/slic3r/GUI/Plater.cpp:3359 #: src/slic3r/GUI/Plater.cpp:6654 src/slic3r/GUI/Tab.cpp:1628 #: src/slic3r/GUI/Tab.cpp:4986 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:1781 #, possible-c-format, possible-boost-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1804 #, possible-boost-format msgid "%1% was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1807 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1823 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1833 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1844 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1844 src/libslic3r/PrintConfig.cpp:4694 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1858 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1875 msgid "Loading of a configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1877 src/slic3r/GUI/MainFrame.cpp:1944 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1908 msgid "Exporting configuration bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1909 msgid "" "Some presets are modified and the unsaved changes will not be exported into " "configuration bundle." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1918 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1941 msgid "Loading of a configuration bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1971 #, possible-c-format, possible-boost-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:453 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:464 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:469 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:472 #: src/slic3r/GUI/Mouse3DController.cpp:493 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:484 #: src/slic3r/GUI/Mouse3DController.cpp:493 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:490 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:505 msgid "Options:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:508 msgid "Swap Y/Z axes" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:227 #, possible-c-format, possible-boost-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:228 #, possible-c-format, possible-boost-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:247 #, possible-c-format, possible-boost-format msgid "%s warning" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:248 #, possible-c-format, possible-boost-format msgid "%s has a warning" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:261 src/slic3r/GUI/MsgDialog.cpp:274 #, possible-c-format, possible-boost-format msgid "%s info" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:302 #, possible-c-format, possible-boost-format msgid "%s information" msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:899 msgid "3D Mouse disconnected." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:900 msgid "Configuration update is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:900 msgid "See more." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:908 msgid "" "You have just added a G-code for color change, but its value is empty.\n" "To export the G-code correctly, check the \"Color Change G-code\" in " "\"Printer Settings > Custom G-code\"" msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:911 msgid "" "No color change event was added to the print. The print does not look like a " "sign." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:913 msgid "Desktop integration was successful." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:915 msgid "Desktop integration failed." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:917 msgid "Undo desktop integration was successful." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:919 msgid "Undo desktop integration failed." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:920 msgid "Exporting." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:924 msgid "" "PrusaSlicer recieved a download request from Printables.com, but it's not " "allowed. You can allow it" msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:925 msgid "here." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:773 msgid "Open Folder." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:811 msgid "Eject drive" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1054 #: src/slic3r/GUI/NotificationManager.cpp:1267 #: src/slic3r/GUI/NotificationManager.cpp:1472 msgid "ERROR" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1269 #: src/slic3r/GUI/NotificationManager.cpp:1377 msgid "COMPLETED" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1467 msgid "RESOLVING ADDRESS" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1477 msgid "CANCELED" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1539 msgid "Cancel upload" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1648 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with custom supports." msgid_plural "%1$d objects were loaded with custom supports." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1649 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with custom seam." msgid_plural "%1$d objects were loaded with custom seam." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1650 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with multimaterial painting." msgid_plural "%1$d objects were loaded with multimaterial painting." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1651 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with variable layer height." msgid_plural "%1$d objects were loaded with variable layer height." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1652 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with partial sinking." msgid_plural "%1$d objects were loaded with partial sinking." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1653 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded as a part of cut object." msgid_plural "%1$d objects were loaded as parts of cut object" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1766 msgid "Slicing finished." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1766 msgid "Export G-Code." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1766 msgid "Export." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:2101 #: src/slic3r/GUI/NotificationManager.cpp:2108 #: src/slic3r/GUI/NotificationManager.cpp:2124 #: src/slic3r/GUI/NotificationManager.cpp:2130 #: src/slic3r/GUI/NotificationManager.cpp:2201 msgid "ERROR:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:2113 #: src/slic3r/GUI/NotificationManager.cpp:2140 #: src/slic3r/GUI/NotificationManager.cpp:2148 #: src/slic3r/GUI/NotificationManager.cpp:2159 src/slic3r/GUI/Plater.cpp:3220 msgid "WARNING:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:2275 msgid "Exporting finished." msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:67 msgid "Paint-on seam" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:68 msgid "Cut connectors" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:70 msgid "Sinking" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:110 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:114 #: src/slic3r/GUI/ObjectDataViewModel.cpp:275 #, possible-c-format, possible-boost-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:121 src/slic3r/GUI/Tab.cpp:4805 #: src/slic3r/GUI/Tab.cpp:4942 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:150 msgid "Range" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:376 #, possible-c-format, possible-boost-format msgid "" "PrusaSlicer requires OpenGL ES 2.0 capable graphics driver to run " "correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:379 #, possible-c-format, possible-boost-format msgid "" "PrusaSlicer requires OpenGL %s capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:382 #, possible-c-format, possible-boost-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:386 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:389 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw-renderer parameter." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:391 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:399 #, possible-c-format, possible-boost-format msgid "" "Unable to load the following shaders:\n" "%s" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:400 msgid "Error loading shaders" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:126 msgid "Unavailable for this method." msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:388 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:388 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52 msgid "Delete this preset from this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:84 msgid "This printer will be shown in the presets list as" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165 msgid "Type here the name of your printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176 msgid "Descriptive name for the printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180 msgid "Add preset for this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2239 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:271 msgid "Connection to printers connected via the print host failed." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:313 msgid "Test" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:318 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:330 msgid "Success!" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:340 msgid "Refresh Printers" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:377 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:378 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:407 #: src/libslic3r/PrintConfig.cpp:343 msgid "HTTPS CA File" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:408 #, possible-c-format, possible-boost-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:409 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:706 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:710 msgid "You have to enter a printer name." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:718 #, possible-boost-format msgid "Printer with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:719 msgid "Replace?" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:746 #, possible-boost-format msgid "" "Following printer preset is duplicated:%1%The above preset for printer \"%2%" "\" will be used just once." msgid_plural "" "Following printer presets are duplicated:%1%The above presets for printer " "\"%2%\" will be used just once." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:796 msgid "It's not possible to delete the last related preset for the printer." msgstr "" #: src/slic3r/GUI/Plater.cpp:158 msgid "The provided name is not valid;" msgstr "" #: src/slic3r/GUI/Plater.cpp:159 src/slic3r/GUI/SavePresetDialog.cpp:166 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/Plater.cpp:223 msgid "" "For a multipart object, this value isn't accurate.\n" "It doesn't take account of intersections and negative volumes." msgstr "" #: src/slic3r/GUI/Plater.cpp:227 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:229 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:286 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:306 src/slic3r/GUI/Plater.cpp:1414 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:307 src/slic3r/GUI/Plater.cpp:1395 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:308 src/slic3r/GUI/Plater.cpp:1407 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:309 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:310 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:311 src/slic3r/GUI/Plater.cpp:1377 #: src/slic3r/GUI/Plater.cpp:1464 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/Plater.cpp:312 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:437 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:440 src/libslic3r/PrintConfig.cpp:2620 #: src/libslic3r/PrintConfig.cpp:3409 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:441 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:442 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:475 src/slic3r/GUI/Tab.cpp:1489 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:477 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:485 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:592 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:595 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:596 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:929 src/slic3r/GUI/Plater.cpp:7162 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:949 src/slic3r/GUI/Plater.cpp:3359 #: src/slic3r/GUI/Plater.cpp:6657 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:1127 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1324 #, possible-boost-format msgid "%1% (%2$d shell)" msgid_plural "%1% (%2$d shells)" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:1352 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1355 msgid "object" msgid_plural "objects" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:1355 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1395 msgid "Used Filament (in)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1397 src/slic3r/GUI/Plater.cpp:1450 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1397 src/slic3r/GUI/Plater.cpp:1450 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1407 msgid "Used Filament (in³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1433 #, possible-boost-format msgid "Filament at extruder %1%" msgstr "" #: src/slic3r/GUI/Plater.cpp:1439 msgid "(including spool)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1448 src/libslic3r/PrintConfig.cpp:1161 #: src/libslic3r/PrintConfig.cpp:3716 src/libslic3r/PrintConfig.cpp:3717 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1466 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1473 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1734 #, possible-boost-format msgid "Do you want to save the changes to \"%1%\"?" msgstr "" #: src/slic3r/GUI/Plater.cpp:1735 src/slic3r/GUI/UnsavedChangesDialog.cpp:905 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1599 msgid "Save" msgstr "" #: src/slic3r/GUI/Plater.cpp:1735 src/slic3r/GUI/UnsavedChangesDialog.cpp:899 msgid "Discard" msgstr "" #: src/slic3r/GUI/Plater.cpp:1740 src/slic3r/GUI/Preferences.cpp:354 msgid "Ask for unsaved changes in project" msgstr "" #: src/slic3r/GUI/Plater.cpp:1743 msgid "" "You will not be asked about it again, when: \n" "- Closing PrusaSlicer,\n" "- Loading or creating a new project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2214 #, possible-c-format, possible-boost-format msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:2220 #, possible-c-format, possible-boost-format msgid "Ejecting of device %s(%s) has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2239 src/slic3r/GUI/Plater.cpp:5199 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2346 msgid "Expand sidebar" msgstr "" #: src/slic3r/GUI/Plater.cpp:2428 msgid "" "The preset below was temporarily installed on the active instance of " "PrusaSlicer" msgid_plural "" "The presets below were temporarily installed on the active instance of " "PrusaSlicer" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2583 #, possible-boost-format msgid "Failed loading file \"%1%\" due to an invalid configuration." msgstr "" #: src/slic3r/GUI/Plater.cpp:2603 #, possible-c-format, possible-boost-format msgid "" "Object size from file %s appears to be zero.\n" "This object has been removed from the model" msgid_plural "" "Objects size from file %s appears to be zero.\n" "These objects have been removed from the model" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2607 msgid "The size of the object is zero" msgstr "" #: src/slic3r/GUI/Plater.cpp:2620 #, possible-c-format, possible-boost-format msgid "" "The dimensions of the object from file %s seem to be defined in meters.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of the object?" msgid_plural "" "The dimensions of some objects from file %s seem to be defined in meters.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of these objects?" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2624 src/slic3r/GUI/Plater.cpp:2646 msgid "The object is too small" msgstr "" #: src/slic3r/GUI/Plater.cpp:2625 src/slic3r/GUI/Plater.cpp:2647 msgid "Apply to all the remaining small objects being loaded." msgstr "" #: src/slic3r/GUI/Plater.cpp:2642 #, possible-c-format, possible-boost-format msgid "" "The dimensions of the object from file %s seem to be defined in inches.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of the object?" msgid_plural "" "The dimensions of some objects from file %s seem to be defined in inches.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of these objects?" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2659 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2662 src/slic3r/GUI/Plater.cpp:2711 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2669 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2670 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2708 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2827 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2828 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2908 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2915 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2921 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2927 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3030 msgid "Delete object which is a part of cut object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3031 msgid "" "You try to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that PrusaSlicer can't guarantee model consistency" msgstr "" #: src/slic3r/GUI/Plater.cpp:3035 msgid "Delete object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3040 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3057 msgid "Delete All Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3086 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:3141 msgid "" "The selected object couldn't be split because it contains only one solid " "part." msgstr "" #: src/slic3r/GUI/Plater.cpp:3148 msgid "All non-solid parts (modifiers) were deleted" msgstr "" #: src/slic3r/GUI/Plater.cpp:3150 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3202 msgid "" "An object has custom support enforcers which will not be used because " "supports are disabled." msgstr "" #: src/slic3r/GUI/Plater.cpp:3204 msgid "Enable supports for enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:3339 src/slic3r/GUI/Plater.cpp:4238 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:3410 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3496 msgid "Replace from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3514 msgid "Unable to replace with more than one volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:3514 src/slic3r/GUI/Plater.cpp:3597 msgid "Error during replace" msgstr "" #: src/slic3r/GUI/Plater.cpp:3589 msgid "Select the new file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3597 msgid "File for the replace wasn't selected" msgstr "" #: src/slic3r/GUI/Plater.cpp:3684 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3715 src/slic3r/GUI/Plater.cpp:5355 #: src/slic3r/GUI/Plater.cpp:5365 msgid "The selected file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3716 msgid "differs from the original file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3716 msgid "Do you want to replace it" msgstr "" #: src/slic3r/GUI/Plater.cpp:3736 src/slic3r/GUI/Plater.cpp:3742 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3864 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3869 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3887 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:4191 msgid "There are active warnings concerning sliced models:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4202 msgid "generated warnings" msgstr "" #: src/slic3r/GUI/Plater.cpp:4554 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4980 msgid "Undo / Redo is processing" msgstr "" #: src/slic3r/GUI/Plater.cpp:4982 #, possible-boost-format msgid "" "Switching the printer technology from %1% to %2%.\n" "Some %1% presets were modified, which will be lost after switching the " "printer technology." msgstr "" #: src/slic3r/GUI/Plater.cpp:5184 msgid "Creating a new project while the current project is modified." msgstr "" #: src/slic3r/GUI/Plater.cpp:5187 msgid "Creating a new project while some presets are modified." msgstr "" #: src/slic3r/GUI/Plater.cpp:5188 msgid "You can keep presets modifications to the new project or discard them" msgstr "" #: src/slic3r/GUI/Plater.cpp:5189 msgid "" "You can keep presets modifications to the new project, discard them or save " "changes as new presets.\n" "Note, if changes will be saved then new project wouldn't keep them" msgstr "" #: src/slic3r/GUI/Plater.cpp:5194 msgid "Creating a new project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5228 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5258 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:5262 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:5291 msgid "Import SLA archive" msgstr "" #: src/slic3r/GUI/Plater.cpp:5355 src/slic3r/GUI/Plater.cpp:5365 msgid "does not contain valid gcode." msgstr "" #: src/slic3r/GUI/Plater.cpp:5356 src/slic3r/GUI/Plater.cpp:5366 msgid "Error while loading .gcode file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5433 #, possible-c-format, possible-boost-format msgid "%s - Multiple projects file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5443 msgid "There are several files being loaded, including Project files." msgstr "" #: src/slic3r/GUI/Plater.cpp:5443 src/slic3r/GUI/Plater.cpp:5446 msgid "Select an action to apply to all files." msgstr "" #: src/slic3r/GUI/Plater.cpp:5446 msgid "There are several files being loaded." msgstr "" #: src/slic3r/GUI/Plater.cpp:5448 src/slic3r/GUI/Plater.cpp:5842 msgid "Action" msgstr "" #: src/slic3r/GUI/Plater.cpp:5469 msgid "Import geometry" msgstr "" #: src/slic3r/GUI/Plater.cpp:5482 src/slic3r/GUI/Plater.cpp:5834 msgid "Start new PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/Plater.cpp:5496 msgid "Select one to load as project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5507 msgid "Select one to load config only" msgstr "" #: src/slic3r/GUI/Plater.cpp:5609 #, possible-boost-format msgid "Failed to unzip file to %1%: %2% " msgstr "" #: src/slic3r/GUI/Plater.cpp:5618 #, possible-boost-format msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:5821 #, possible-c-format, possible-boost-format msgid "%s - Load project file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5830 msgid "Open as project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5831 msgid "Import geometry only" msgstr "" #: src/slic3r/GUI/Plater.cpp:5832 msgid "Import config only" msgstr "" #: src/slic3r/GUI/Plater.cpp:5837 msgid "Select an action to apply to the file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5858 msgid "Don't show again" msgstr "" #: src/slic3r/GUI/Plater.cpp:5899 msgid "You can open only one .gcode file at a time." msgstr "" #: src/slic3r/GUI/Plater.cpp:5900 msgid "Drag and drop G-code file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5992 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:5997 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:6047 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:6058 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:6067 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:6109 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:6167 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:6168 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:6171 #, possible-c-format, possible-boost-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:6187 msgid "Fill bed" msgstr "" #: src/slic3r/GUI/Plater.cpp:6323 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:6323 msgid "Save SL1 / SL1S file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:6336 msgid "The provided file name is not valid." msgstr "" #: src/slic3r/GUI/Plater.cpp:6337 msgid "The following characters are not allowed by a FAT file system:" msgstr "" #: src/slic3r/GUI/Plater.cpp:6531 msgid "" "The plater is empty.\n" "Do you want to save the project?" msgstr "" #: src/slic3r/GUI/Plater.cpp:6531 msgid "Save project" msgstr "" #: src/slic3r/GUI/Plater.cpp:6766 msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" #: src/slic3r/GUI/Plater.cpp:6766 src/slic3r/GUI/PrintHostDialogs.cpp:132 msgid "Upload and Print" msgstr "" #: src/slic3r/GUI/Plater.cpp:7161 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:7306 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:240 src/slic3r/GUI/Tab.cpp:2274 #: src/slic3r/GUI/Tab.cpp:2505 src/slic3r/GUI/Tab.cpp:2617 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1302 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1854 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:258 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:259 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:263 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:264 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:268 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:269 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:274 msgid "Alert when supports needed" msgstr "" #: src/slic3r/GUI/Preferences.cpp:275 msgid "" "If this is enabled, Slic3r will raise alerts when it detects issues in the " "sliced object, that can be resolved with supports (and brim). Examples of " "such issues are floating object parts, unsupported extrusions and low bed " "adhesion." msgstr "" #: src/slic3r/GUI/Preferences.cpp:285 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:286 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:293 msgid "If enabled, sets PrusaSlicer as default application to open .3mf files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:298 msgid "If enabled, sets PrusaSlicer as default application to open .stl files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:307 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:312 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:313 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:317 msgid "Suppress \" Template \" filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:318 msgid "" "Suppress \" Template \" filament presets in configuration wizard and sidebar " "visibility." msgstr "" #: src/slic3r/GUI/Preferences.cpp:322 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:323 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:331 msgid "Show load project dialog" msgstr "" #: src/slic3r/GUI/Preferences.cpp:332 msgid "" "When checked, whenever dragging and dropping a project file on the " "application or open it from a browser, shows a dialog asking to select the " "action to take on the file to load." msgstr "" #: src/slic3r/GUI/Preferences.cpp:335 msgid "Show drop project dialog" msgstr "" #: src/slic3r/GUI/Preferences.cpp:336 msgid "" "When checked, whenever dragging and dropping a project file on the " "application, shows a dialog asking to select the action to take on the file " "to load." msgstr "" #: src/slic3r/GUI/Preferences.cpp:342 src/slic3r/GUI/Preferences.cpp:346 msgid "Allow just a single PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/Preferences.cpp:343 msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" #: src/slic3r/GUI/Preferences.cpp:347 msgid "" "If this is enabled, when starting PrusaSlicer and another instance of the " "same PrusaSlicer is already running, that instance will be reactivated " "instead." msgstr "" #: src/slic3r/GUI/Preferences.cpp:355 msgid "" "Always ask for unsaved changes in project, when: \n" "- Closing PrusaSlicer,\n" "- Loading or creating a new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:363 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:925 msgid "" "Ask to save unsaved changes in presets when closing the application or when " "loading a new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:364 msgid "" "Always ask for unsaved changes in presets, when: \n" "- Closing PrusaSlicer while some presets are modified,\n" "- Loading a new project while some presets are modified" msgstr "" #: src/slic3r/GUI/Preferences.cpp:370 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:924 msgid "Ask for unsaved changes in presets when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:371 msgid "" "Always ask for unsaved changes in presets when selecting new preset or " "resetting a preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:375 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:923 msgid "Ask for unsaved changes in presets when creating new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:376 msgid "Always ask for unsaved changes in presets when creating new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:382 msgid "Associate .gcode files to PrusaSlicer G-code Viewer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:383 msgid "" "If enabled, sets PrusaSlicer G-code Viewer as default application to open ." "gcode files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:390 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:391 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:400 src/slic3r/GUI/Preferences.cpp:401 msgid "Show splash screen" msgstr "" #: src/slic3r/GUI/Preferences.cpp:406 msgid "If enabled, PrusaSlicer will be open at the position it was closed" msgstr "" #: src/slic3r/GUI/Preferences.cpp:411 msgid "Clear Undo / Redo stack on new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:412 msgid "" "Clear Undo / Redo stack on new project or when an existing project is loaded." msgstr "" #: src/slic3r/GUI/Preferences.cpp:417 msgid "Enable support for legacy 3DConnexion devices" msgstr "" #: src/slic3r/GUI/Preferences.cpp:418 msgid "" "If enabled, the legacy 3DConnexion devices settings dialog is available by " "pressing CTRL+M" msgstr "" #: src/slic3r/GUI/Preferences.cpp:425 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:435 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:436 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:440 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:441 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:445 msgid "Reverse direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:446 msgid "If enabled, reverses the direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:452 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:492 msgid "Sequential slider applied only to top layer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:493 msgid "" "If enabled, changes made using the sequential slider, in preview, apply only " "to gcode top layer.If disabled, changes made using the sequential slider, in " "preview, apply to the whole gcode." msgstr "" #: src/slic3r/GUI/Preferences.cpp:499 msgid "Show sidebar collapse/expand button" msgstr "" #: src/slic3r/GUI/Preferences.cpp:500 msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " "right corner of the 3D Scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:511 msgid "Use colors for axes values in Manipulation panel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:512 msgid "" "If enabled, the axes names and axes values will be colorized according to " "the axes colors. If disabled, old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:517 msgid "Order object volumes by types" msgstr "" #: src/slic3r/GUI/Preferences.cpp:518 msgid "" "If enabled, volumes will be always ordered inside the object. Correct order " "is Model Part, Negative Volume, Modifier, Support Blocker and Support " "Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and " "Modifiers. But one of the model parts have to be on the first place." msgstr "" #: src/slic3r/GUI/Preferences.cpp:523 msgid "Show non-manifold edges" msgstr "" #: src/slic3r/GUI/Preferences.cpp:524 msgid "If enabled, shows non-manifold edges." msgstr "" #: src/slic3r/GUI/Preferences.cpp:528 msgid "Allow automatically color change" msgstr "" #: src/slic3r/GUI/Preferences.cpp:529 msgid "" "If enabled, related notification will be shown, when sliced object looks " "like a logo or a sign." msgstr "" #: src/slic3r/GUI/Preferences.cpp:534 msgid "Set settings tabs as menu items (experimental)" msgstr "" #: src/slic3r/GUI/Preferences.cpp:535 msgid "" "If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " "will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:542 msgid "Show \"Tip of the day\" notification after start" msgstr "" #: src/slic3r/GUI/Preferences.cpp:543 msgid "If enabled, useful hints are displayed at startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:547 msgid "Notify about new releases" msgstr "" #: src/slic3r/GUI/Preferences.cpp:548 msgid "" "You will be notified about new release after startup acordingly: All = " "Regular release and alpha / beta releases. Release only = regular release." msgstr "" #: src/slic3r/GUI/Preferences.cpp:551 msgid "Release only" msgstr "" #: src/slic3r/GUI/Preferences.cpp:558 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:559 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:577 src/slic3r/GUI/Tab.cpp:1659 msgid "Other" msgstr "" #: src/slic3r/GUI/Preferences.cpp:594 msgid "If enabled, PrusaSlicer will not open a hyperlinks in your browser." msgstr "" #: src/slic3r/GUI/Preferences.cpp:600 msgid "Allow downloads from Printables.com" msgstr "" #: src/slic3r/GUI/Preferences.cpp:601 msgid "If enabled, PrusaSlicer will be allowed to download from Printables.com" msgstr "" #: src/slic3r/GUI/Preferences.cpp:610 msgid "Render" msgstr "" #: src/slic3r/GUI/Preferences.cpp:620 msgid "Use environment map" msgstr "" #: src/slic3r/GUI/Preferences.cpp:621 msgid "If enabled, renders object using the environment map." msgstr "" #: src/slic3r/GUI/Preferences.cpp:629 msgid "Dark mode (experimental)" msgstr "" #: src/slic3r/GUI/Preferences.cpp:639 msgid "Enable dark mode" msgstr "" #: src/slic3r/GUI/Preferences.cpp:640 msgid "" "If enabled, UI will use Dark mode colors. If disabled, old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:647 msgid "Use system menu for application" msgstr "" #: src/slic3r/GUI/Preferences.cpp:648 msgid "" "If enabled, application will use the standard Windows system menu,\n" "but on some combination od display scales it can look ugly. If disabled, old " "UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:726 msgid "Changes for the critical options" msgstr "" #: src/slic3r/GUI/Preferences.cpp:728 msgid "" "Changing some options will trigger application restart.\n" "You will lose the content of the plater." msgstr "" #: src/slic3r/GUI/Preferences.cpp:921 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:936 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preferences.cpp:972 msgid "Layout Options" msgstr "" #: src/slic3r/GUI/Preferences.cpp:981 msgid "Old regular layout with the tab bar" msgstr "" #: src/slic3r/GUI/Preferences.cpp:982 msgid "New layout, access via settings button in the top menu" msgstr "" #: src/slic3r/GUI/Preferences.cpp:983 msgid "Settings in non-modal window" msgstr "" #: src/slic3r/GUI/Preferences.cpp:1025 msgid "Text colors" msgstr "" #: src/slic3r/GUI/Preferences.cpp:1049 msgid "Mode markers" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:254 #: src/slic3r/GUI/PresetComboBoxes.cpp:306 #: src/slic3r/GUI/PresetComboBoxes.cpp:846 #: src/slic3r/GUI/PresetComboBoxes.cpp:909 #: src/slic3r/GUI/PresetComboBoxes.cpp:1073 #: src/slic3r/GUI/PresetComboBoxes.cpp:1125 msgid "System presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:310 #: src/slic3r/GUI/PresetComboBoxes.cpp:915 #: src/slic3r/GUI/PresetComboBoxes.cpp:1130 msgid "User presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:321 msgid "Incompatible presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:364 #, possible-boost-format msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:366 msgid "Delete Physical Printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:612 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:740 #: src/slic3r/GUI/PresetComboBoxes.cpp:788 msgid "Add/Remove presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:745 #: src/slic3r/GUI/PresetComboBoxes.cpp:793 src/slic3r/GUI/Tab.cpp:3312 msgid "Add physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:759 msgid "Edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:765 msgid "Change extruder color" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:773 src/slic3r/GUI/Tab.cpp:3312 msgid "Edit physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:779 msgid "Open physical printer URL" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:784 msgid "Delete physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:924 #: src/slic3r/GUI/PresetComboBoxes.cpp:1142 msgid "Template presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:935 #: src/slic3r/GUI/PresetComboBoxes.cpp:1156 msgid "Physical printers" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:959 msgid "Add/Remove filaments" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:961 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:963 #: src/slic3r/GUI/PresetComboBoxes.cpp:1180 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:32 #, possible-boost-format msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:40 #, possible-boost-format msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:44 #, possible-boost-format msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at " "%2%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:55 #, possible-boost-format msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:57 #, possible-boost-format msgid "During the other layers, fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:57 #, possible-boost-format msgid "Fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:59 #, possible-boost-format msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:61 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:64 msgid "During the other layers, fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:64 msgid "Fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:170 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:171 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:174 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:176 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:178 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:181 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:183 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:188 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:191 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:192 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:193 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:197 #, possible-c-format, possible-boost-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:215 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:221 #, possible-c-format, possible-boost-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:236 #, possible-c-format, possible-boost-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:240 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:269 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:282 #, possible-boost-format msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:285 #, possible-boost-format msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:288 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:301 #, possible-boost-format msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:304 #, possible-boost-format msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:307 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:42 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:42 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:55 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:64 msgid "Group" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:74 msgid "Upload to storage:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:83 msgid "Upload to storage: " msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:105 #, possible-c-format, possible-boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:112 msgid "Upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:122 msgid "Upload to Queue" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:143 msgid "Upload and Simulate" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:298 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:299 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:300 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:301 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:302 msgctxt "OfFile" msgid "Size" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:303 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:304 msgid "Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:308 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:310 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:368 #: src/slic3r/GUI/PrintHostDialogs.cpp:423 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:424 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:426 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:427 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:428 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:476 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:29 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:116 #: src/libslic3r/PrintConfig.cpp:1044 src/libslic3r/PrintConfig.cpp:1088 #: src/libslic3r/PrintConfig.cpp:1103 src/libslic3r/PrintConfig.cpp:3569 #: src/libslic3r/PrintConfig.cpp:3578 src/libslic3r/PrintConfig.cpp:3587 #: src/libslic3r/PrintConfig.cpp:3733 src/libslic3r/PrintConfig.cpp:3741 #: src/libslic3r/PrintConfig.cpp:3749 src/libslic3r/PrintConfig.cpp:3756 #: src/libslic3r/PrintConfig.cpp:3764 src/libslic3r/PrintConfig.cpp:3772 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:95 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:1001 #: src/libslic3r/PrintConfig.cpp:1861 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:90 #, possible-c-format, possible-boost-format msgid "Rename %s to:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:90 #, possible-c-format, possible-boost-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:165 #: src/slic3r/GUI/SavePresetDialog.cpp:173 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:174 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:180 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:186 msgid "The supplied name is used for a system profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:187 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:192 msgid "The supplied name is used for a external profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:193 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:203 msgid "Save preset modifications to existing user profile" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:205 msgid "Nothing changed" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:210 #, possible-boost-format msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:212 #, possible-boost-format msgid "" "Preset with name \"%1%\" already exists and is incompatible with selected " "printer." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:213 msgid "Note: This preset will be replaced after saving" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:219 msgid "The name cannot be empty." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:230 msgid "The name is too long." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:235 msgid "The name cannot start with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:240 msgid "The name cannot end with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:245 msgid "The name cannot be the same as a preset alias name." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:289 msgid "Save preset" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:295 msgid "Save presets" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:302 msgid "Rename preset" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:327 msgctxt "PresetName" msgid "Copy" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:347 msgid "Save as profile derived from current printer only." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:407 #, possible-boost-format msgid "" "You have selected physical printer \"%1%\" \n" "with related printer preset \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:446 #, possible-boost-format msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:449 #, possible-boost-format msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:450 #, possible-boost-format msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:451 #, possible-boost-format msgid "Just switch to \"%1%\" preset" msgstr "" #: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391 #: src/slic3r/GUI/Tab.cpp:2645 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391 #: src/slic3r/GUI/Tab.cpp:2639 msgid "Normal" msgstr "" #: src/slic3r/GUI/Selection.cpp:180 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:221 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:253 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:272 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:290 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:309 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:406 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:431 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:1309 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/Selection.cpp:1691 msgid "" "The currently manipulated object is tilted or contains tilted parts " "(rotation angles are not multiples of 90°). Non-uniform scaling of tilted " "objects is only possible in non-local coordinate systems, once the rotation " "is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/Selection.cpp:1694 msgid "This operation is irreversible." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:117 msgid "Data to send" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:557 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:624 msgid "Send system info" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:587 #, possible-boost-format msgid "" "This is the first time you are running %1%. We would like to ask you to send " "some of your system information to us. This will only happen once and we " "will not ask you to do this again (only after you upgrade to the next " "version)." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:591 msgid "" "If we know your hardware, operating system, etc., it will greatly help us in " "development and prioritization, because we will be able to focus our effort " "more efficiently and spend time on features that are needed the most." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:594 msgid "Is it safe?" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:596 #, possible-boost-format msgid "" "We do not send any personal information nor anything that would allow us to " "identify you later. To detect duplicate entries, a unique number derived " "from your system is sent, but the source information cannot be " "reconstructed. Apart from that, only general data about your OS, hardware " "and OpenGL installation are sent. PrusaSlicer is open source, if you want to " "inspect the code actually performing the communication, see %1%." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:620 msgid "Show verbatim data that will be sent" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:622 msgid "Ask me next time" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:623 msgid "Do not send anything" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:709 msgid "System info sent successfully. Thank you." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:712 msgid "Sending system info failed!" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:719 msgid "Sending system info was cancelled." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:726 msgid "Sending system info..." msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:92 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:160 msgid "Blacklisted libraries loaded into PrusaSlicer process:" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:172 msgid "Eigen vectorization supported:" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:179 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:68 src/libslic3r/PrintConfig.cpp:668 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:69 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:74 src/libslic3r/PrintConfig.cpp:683 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:75 msgid "Select the print profiles this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:165 msgid "Compare this preset with some another" msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:167 #, possible-c-format, possible-boost-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:168 #, possible-c-format, possible-boost-format msgid "Rename current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:170 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:174 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:178 #, possible-boost-format msgid "Search in settings [%1%]" msgstr "" #: src/slic3r/GUI/Tab.cpp:1243 msgid "Detach from system preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1256 msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1257 msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1260 msgid "Modifications to the current profile will be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:1266 msgid "Detach preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1292 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1294 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1296 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1300 msgid "Current preset is inherited from" msgstr "" #: src/slic3r/GUI/Tab.cpp:1304 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:1305 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:1306 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1310 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:1316 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:1324 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1327 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1341 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1345 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1353 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1354 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1392 src/slic3r/GUI/Tab.cpp:4940 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1398 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1410 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1411 src/libslic3r/PrintConfig.cpp:2448 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1416 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1427 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1444 msgid "Fuzzy skin (experimental)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1467 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1482 msgid "Skirt" msgstr "" #: src/slic3r/GUI/Tab.cpp:1504 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1509 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1528 msgid "Organic supports" msgstr "" #: src/slic3r/GUI/Tab.cpp:1537 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1550 msgid "Dynamic overhang speed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1557 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1561 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1565 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1576 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1580 msgid "Pressure equalizer (experimental)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1584 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1592 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1596 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/Tab.cpp:1612 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1622 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1625 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1636 msgid "Arachne perimeter generator" msgstr "" #: src/slic3r/GUI/Tab.cpp:1644 src/slic3r/GUI/Tab.cpp:4990 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1645 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1647 msgid "Extruder clearance" msgstr "" #: src/slic3r/GUI/Tab.cpp:1652 src/slic3r/GUI/Tab.cpp:4991 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1671 src/libslic3r/PrintConfig.cpp:2072 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1683 src/slic3r/GUI/Tab.cpp:1684 #: src/slic3r/GUI/Tab.cpp:2080 src/slic3r/GUI/Tab.cpp:2081 #: src/slic3r/GUI/Tab.cpp:2486 src/slic3r/GUI/Tab.cpp:2487 #: src/slic3r/GUI/Tab.cpp:2564 src/slic3r/GUI/Tab.cpp:2565 #: src/slic3r/GUI/Tab.cpp:4182 src/slic3r/GUI/Tab.cpp:4822 #: src/slic3r/GUI/Tab.cpp:4823 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1690 src/slic3r/GUI/Tab.cpp:2088 #: src/slic3r/GUI/Tab.cpp:2493 src/slic3r/GUI/Tab.cpp:2571 #: src/slic3r/GUI/Tab.cpp:4830 src/slic3r/GUI/Tab.cpp:4996 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1691 src/slic3r/GUI/Tab.cpp:2089 #: src/slic3r/GUI/Tab.cpp:2494 src/slic3r/GUI/Tab.cpp:2572 #: src/slic3r/GUI/Tab.cpp:4831 src/slic3r/GUI/Tab.cpp:4997 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1723 msgid "Post processing scripts shall modify G-code file in place." msgstr "" #: src/slic3r/GUI/Tab.cpp:1802 #, possible-c-format, possible-boost-format msgid "" "The following line %s contains reserved keywords.\n" "Please remove it, as it may cause problems in G-code visualization and " "printing time estimation." msgid_plural "" "The following lines %s contain reserved keywords.\n" "Please remove them, as they may cause problems in G-code visualization and " "printing time estimation." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:1807 msgid "Found reserved keywords in" msgstr "" #: src/slic3r/GUI/Tab.cpp:1869 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1870 src/slic3r/GUI/Tab.cpp:2827 msgid "Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:1951 msgid "Temperature" msgstr "" #: src/slic3r/GUI/Tab.cpp:1955 msgid "Nozzle" msgstr "" #: src/slic3r/GUI/Tab.cpp:1960 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1965 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1967 src/libslic3r/PrintConfig.cpp:1968 #: src/libslic3r/PrintConfig.cpp:3082 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1978 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1979 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1989 msgid "Dynamic fan speeds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1996 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:2002 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:2009 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:2019 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2022 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:2035 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:2059 src/slic3r/GUI/Tab.cpp:2398 #: src/slic3r/GUI/Tab.cpp:4493 src/libslic3r/GCode.cpp:684 #: src/libslic3r/PrintConfig.cpp:2532 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2060 src/slic3r/GUI/Tab.cpp:2399 #: src/libslic3r/GCode.cpp:658 src/libslic3r/PrintConfig.cpp:2482 #: src/libslic3r/PrintConfig.cpp:2497 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2070 src/slic3r/GUI/Tab.cpp:2409 #: src/libslic3r/GCode.cpp:659 src/libslic3r/PrintConfig.cpp:788 #: src/libslic3r/PrintConfig.cpp:798 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2115 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:2241 msgid "" "Note: All parameters from this group are moved to the Physical Printer " "settings (see changelog).\n" "\n" "A new Physical Printer profile is created by clicking on the \"cog\" icon " "right of the Printer profiles combo box, by selecting the \"Add physical " "printer\" item in the Printer combo box. The Physical Printer profile editor " "opens also when clicking on the \"cog\" icon in the Printer settings tab. " "The Physical Printer profiles are being stored into PrusaSlicer/" "physical_printer directory." msgstr "" #: src/slic3r/GUI/Tab.cpp:2275 src/slic3r/GUI/Tab.cpp:2506 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2284 src/slic3r/GUI/UnsavedChangesDialog.cpp:1302 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1854 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:2289 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:2322 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2326 src/slic3r/GUI/Tab.cpp:2714 #: src/libslic3r/PrintConfig.cpp:1937 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:2419 src/libslic3r/GCode.cpp:660 #: src/libslic3r/PrintConfig.cpp:444 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2429 src/libslic3r/GCode.cpp:661 #: src/libslic3r/PrintConfig.cpp:1665 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2439 src/libslic3r/GCode.cpp:662 #: src/libslic3r/PrintConfig.cpp:2965 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2449 src/libslic3r/GCode.cpp:663 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2459 src/libslic3r/GCode.cpp:664 msgid "Color Change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2468 src/libslic3r/GCode.cpp:665 #: src/libslic3r/PrintConfig.cpp:2523 msgid "Pause Print G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2477 src/libslic3r/GCode.cpp:666 msgid "Template Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2513 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2528 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2529 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2536 src/slic3r/GUI/Tab.cpp:4812 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2549 src/slic3r/GUI/Tab.cpp:4808 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2556 msgid "Output" msgstr "" #: src/slic3r/GUI/Tab.cpp:2615 src/slic3r/GUI/Tab.cpp:2875 #: src/libslic3r/PrintConfig.cpp:1694 src/libslic3r/PrintConfig.cpp:1727 #: src/libslic3r/PrintConfig.cpp:1744 src/libslic3r/PrintConfig.cpp:1761 #: src/libslic3r/PrintConfig.cpp:1777 src/libslic3r/PrintConfig.cpp:1787 #: src/libslic3r/PrintConfig.cpp:1797 src/libslic3r/PrintConfig.cpp:1810 #: src/libslic3r/PrintConfig.cpp:1820 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2638 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2644 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2653 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2658 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2667 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2673 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2711 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2739 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:2775 msgid "Apply below setting to other extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:2820 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2824 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2830 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2843 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2900 src/slic3r/GUI/Tab.cpp:2909 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2910 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:3074 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3076 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:3384 msgid "New printer preset selected" msgstr "" #: src/slic3r/GUI/Tab.cpp:3758 msgid "Detached" msgstr "" #: src/slic3r/GUI/Tab.cpp:3857 msgid "" "The physical printer below is based on the preset, you are going to rename." msgid_plural "" "The physical printers below are based on the preset, you are going to rename." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3862 msgid "Note, that the selected preset will be renamed in this printer too." msgid_plural "" "Note, that the selected preset will be renamed in these printers too." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3924 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3924 msgid "delete" msgstr "" #: src/slic3r/GUI/Tab.cpp:3933 msgid "It's a last preset for this physical printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:3938 #, possible-boost-format msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3950 msgid "" "The physical printer below is based on the preset, you are going to delete." msgid_plural "" "The physical printers below are based on the preset, you are going to delete." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3955 msgid "Note, that the selected preset will be deleted from this printer too." msgid_plural "" "Note, that the selected preset will be deleted from these printers too." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3960 msgid "" "The physical printer below is based only on the preset, you are going to " "delete." msgid_plural "" "The physical printers below are based only on the preset, you are going to " "delete." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3965 msgid "" "Note, that this printer will be deleted after deleting the selected preset." msgid_plural "" "Note, that these printers will be deleted after deleting the selected preset." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3970 #, possible-boost-format msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3975 #, possible-boost-format msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:4061 src/slic3r/GUI/Tab.cpp:4423 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:4180 msgid "Find" msgstr "" #: src/slic3r/GUI/Tab.cpp:4181 msgid "Replace with" msgstr "" #: src/slic3r/GUI/Tab.cpp:4270 msgid "Regular expression" msgstr "" #: src/slic3r/GUI/Tab.cpp:4274 msgid "Case insensitive" msgstr "" #: src/slic3r/GUI/Tab.cpp:4278 msgid "Whole word" msgstr "" #: src/slic3r/GUI/Tab.cpp:4282 msgid "Match single line" msgstr "" #: src/slic3r/GUI/Tab.cpp:4385 msgid "Are you sure you want to delete all substitutions?" msgstr "" #: src/slic3r/GUI/Tab.cpp:4521 msgid "" "Machine limits will be emitted to G-code and used to estimate print time." msgstr "" #: src/slic3r/GUI/Tab.cpp:4524 msgid "" "Machine limits will NOT be emitted to G-code, however they will be used to " "estimate print time, which may therefore not be accurate as the printer may " "apply a different set of machine limits." msgstr "" #: src/slic3r/GUI/Tab.cpp:4528 msgid "" "Machine limits are not set, therefore the print time estimate may not be " "accurate." msgstr "" #: src/slic3r/GUI/Tab.cpp:4550 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:4552 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:4554 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:4556 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:4561 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:4563 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:4566 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:4568 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4578 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:4580 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:4583 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4586 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:4588 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4594 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:4595 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:4601 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4602 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4764 src/slic3r/GUI/Tab.cpp:4766 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:4851 src/slic3r/GUI/Tab.cpp:4852 msgid "Material printing profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:4901 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:4906 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:4929 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:4956 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:5024 #, possible-boost-format msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" msgstr "" #: src/slic3r/GUI/Tab.cpp:5026 src/libslic3r/PrintConfig.cpp:3497 msgid "Object elevation" msgstr "" #: src/slic3r/GUI/Tab.cpp:5026 src/libslic3r/PrintConfig.cpp:3958 msgid "Pad around object" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:147 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:156 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:165 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1107 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1122 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1137 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1152 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1197 msgid "Undef" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:792 msgid "Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:810 msgid "Switching Presets: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:858 msgid "Original Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:859 msgid "Modified Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:861 msgid "New Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:892 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:895 msgid "Keep" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:892 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1569 msgid "Transfer" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:899 msgid "Don't save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:926 msgid "" "You will not be asked about the unsaved changes in presets the next time you " "create new project" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:927 msgid "" "You will not be asked about the unsaved changes in presets the next time you " "switch a preset" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:928 msgid "" "You will not be asked about the unsaved changes in presets the next time " "you: \n" "- Closing PrusaSlicer while some presets are modified,\n" "- Loading a new project while some presets are modified" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:931 msgid "PrusaSlicer will remember your action." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:932 #, possible-boost-format msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to be asked about unsaved changes again." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:964 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1772 msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:966 msgid "All settings changes will not be saved" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:966 msgid "All settings changes will be discarded." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:969 msgid "Save the selected options." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:970 msgid "Keep the selected settings." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:971 msgid "Transfer the selected settings to the newly selected preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:975 #, possible-boost-format msgid "Save the selected options to preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:976 #, possible-boost-format msgid "Transfer the selected options to the newly selected preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1237 msgid "The following preset was modified" msgid_plural "The following presets were modified" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1243 #, possible-boost-format msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1247 #, possible-boost-format msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1248 #, possible-boost-format msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1297 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1850 msgid "Extruders count" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1326 msgid "The preset modifications are successfully saved" msgid_plural "The presets modifications are successfully saved" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1515 msgid "Show all presets (including incompatible)" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1533 msgid "Select presets to compare" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1545 msgid "Left Preset Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1546 msgid "Right Preset Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1595 msgid "" "Transfer the selected options from left preset to the right.\n" "Note: New modified presets will be selected in settings tabs after close " "this dialog." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1603 msgid "Save the selected options from left preset to the right." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1621 msgid "Transfer values from left to right" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1622 msgid "" "If enabled, this dialog can be used for transver selected values from left " "to right preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1807 msgid "One of the presets doesn't found" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1818 msgid "Compared presets has different printer technology" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1832 msgid "Presets are the same" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1840 msgid "" "Presets are different.\n" "Click this button to select the same preset for the right and left preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1864 msgid "Undef category" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1864 msgid "Undef group" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:2016 msgid "Modified" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:41 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:41 #, possible-c-format, possible-boost-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:46 src/slic3r/GUI/UpdateDialogs.cpp:101 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:48 src/slic3r/GUI/UpdateDialogs.cpp:103 #: src/slic3r/GUI/UpdateDialogs.cpp:141 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:56 msgid "Changelog & Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:63 src/slic3r/GUI/UpdateDialogs.cpp:309 #: src/slic3r/GUI/UpdateDialogs.cpp:367 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:69 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:76 src/slic3r/GUI/UpdateDialogs.cpp:109 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:98 msgid "App Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:98 #, possible-c-format, possible-boost-format msgid "" "New version of %s is available.\n" "Do you wish to download it?" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:120 msgid "Next" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:138 msgid "App Update download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:138 #, possible-c-format, possible-boost-format msgid "New version of %s is available." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:146 msgid "Run installer after download. (Otherwise file explorer will be opened)" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:151 msgid "Target directory:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:158 msgid "Select directory" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:176 msgid "Select directory:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:193 msgid "Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:204 msgid "Directory path is empty." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:212 msgid "Directory path is incorrect." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:217 #, possible-boost-format msgid "Directory %1% doesn't exists. Do you wish to create it?" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:222 msgid "Failed to create directory." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:229 #, possible-boost-format msgid "File %1% already exists. Do you wish to overwrite it?" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:234 #, possible-boost-format msgid "Download path is %1%. Do you wish to continue?" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:270 msgid "Opening Configuration Wizard" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:270 src/slic3r/GUI/UpdateDialogs.cpp:437 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:271 msgid "" "PrusaSlicer is not using the newest configuration available.\n" "Configuration Wizard may not offer the latest printers, filaments and SLA " "materials to be installed." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:273 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:276 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:297 src/slic3r/GUI/UpdateDialogs.cpp:357 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:318 msgid "Install" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:320 msgid "Don't install" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:333 src/slic3r/GUI/UpdateDialogs.cpp:388 #, possible-c-format, possible-boost-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:333 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:336 #, possible-c-format, possible-boost-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:389 #, possible-c-format, possible-boost-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:392 #, possible-c-format, possible-boost-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:401 #, possible-c-format, possible-boost-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:406 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:422 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:441 #, possible-c-format, possible-boost-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:458 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:475 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:475 src/slic3r/GUI/UpdateDialogs.cpp:495 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:480 #, possible-c-format, possible-boost-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:495 msgid "App update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:500 #, possible-c-format, possible-boost-format msgid "%s has no version updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:23 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:56 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:116 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:118 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:122 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:124 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:175 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:301 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:302 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:310 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:311 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:354 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:363 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:364 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:378 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:444 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:456 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:456 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:672 #, possible-c-format, possible-boost-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:673 #, possible-c-format, possible-boost-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:206 #: src/slic3r/Utils/OctoPrint.cpp:255 src/slic3r/Utils/OctoPrint.cpp:666 #: src/slic3r/Utils/OctoPrint.cpp:824 src/slic3r/Utils/OctoPrint.cpp:897 #: src/slic3r/Utils/Repetier.cpp:88 #, possible-c-format, possible-boost-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:84 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:90 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:92 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:47 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:53 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:157 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:151 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:154 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:221 #: src/slic3r/Utils/FixModelByWin10.cpp:361 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:237 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:244 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:250 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:253 #: src/slic3r/Utils/FixModelByWin10.cpp:388 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:265 #: src/slic3r/Utils/FixModelByWin10.cpp:272 #: src/slic3r/Utils/FixModelByWin10.cpp:303 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:394 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:396 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:398 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:402 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:412 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:418 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:74 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:76 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:278 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:284 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:286 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:528 msgid "Connection to Prusa SL1 / SL1S works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:534 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:573 msgid "Connection to PrusaLink works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:579 msgid "Could not connect to PrusaLink" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:776 msgid "Storages found:" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:778 msgid "read only" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:778 msgid "no free space" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:781 #, possible-boost-format msgid "Upload has failed. There is no suitable storage found at %1%.%2%" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:64 #, possible-boost-format msgid "Copying of file %1% to %2% failed: %3%" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:998 #: src/slic3r/Utils/PresetUpdater.cpp:1015 msgid "Continue and install configuration updates?" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:1021 msgid "Installing profiles" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:1071 #, possible-boost-format msgid "Downloading resources for %1%." msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:1171 msgid "" "Configuration Update will cause the preset modification to be lost.\n" "So, check unsaved changes and save them if necessary." msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:1173 msgid "Updating" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:1202 #, possible-c-format, possible-boost-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:1206 #, possible-c-format, possible-boost-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:1209 #, possible-c-format, possible-boost-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:1362 #, possible-boost-format msgid "Couldn't locate idx file %1% when performing updates." msgstr "" #: src/slic3r/Utils/Http.cpp:73 msgid "" "Could not detect system SSL certificate store. PrusaSlicer will be unable to " "establish secure network connections." msgstr "" #: src/slic3r/Utils/Http.cpp:78 #, possible-boost-format msgid "PrusaSlicer detected system SSL certificate store in: %1%" msgstr "" #: src/slic3r/Utils/Http.cpp:82 #, possible-boost-format msgid "" "To specify the system certificate store manually, please set the %1% " "environment variable to the correct CA bundle and restart the application." msgstr "" #: src/slic3r/Utils/Http.cpp:91 msgid "" "CURL init has failed. PrusaSlicer will be unable to establish network " "connections. See logs for additional details." msgstr "" #: src/slic3r/Utils/Process.cpp:164 msgid "Open G-code file:" msgstr "" #: src/slic3r/Utils/Repetier.cpp:103 msgid "Connection to Repetier works correctly." msgstr "" #: src/slic3r/Utils/Repetier.cpp:109 msgid "Could not connect to Repetier" msgstr "" #: src/slic3r/Utils/Repetier.cpp:111 msgid "Note: Repetier version at least 0.90.0 is required." msgstr "" #: src/slic3r/Utils/Repetier.cpp:263 #, possible-boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" #: src/slic3r/Utils/Repetier.cpp:270 #, possible-boost-format msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" #: src/slic3r/Utils/Repetier.cpp:283 #, possible-boost-format msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" #: src/slic3r/Config/Snapshot.cpp:584 msgid "Taking a configuration snapshot failed." msgstr "" #: src/slic3r/Config/Snapshot.cpp:598 msgid "" "PrusaSlicer has encountered an error while taking a configuration snapshot." msgstr "" #: src/slic3r/Config/Snapshot.cpp:599 msgid "PrusaSlicer error" msgstr "" #: src/slic3r/Config/Snapshot.cpp:601 msgid "Continue" msgstr "" #: src/slic3r/Config/Snapshot.cpp:601 msgid "Abort" msgstr "" #: src/libslic3r/GCode.cpp:490 msgid "There is an object with no extrusions in the first layer." msgstr "" #: src/libslic3r/GCode.cpp:521 #, possible-boost-format msgid "Empty layer between %1% and %2%." msgstr "" #: src/libslic3r/GCode.cpp:524 msgid "(Some lines not shown)" msgstr "" #: src/libslic3r/GCode.cpp:526 #, possible-boost-format msgid "Object name: %1%" msgstr "" #: src/libslic3r/GCode.cpp:527 msgid "" "Make sure the object is printable. This is usually caused by negligibly " "small extrusions or by a faulty model. Try to repair the model or change its " "orientation on the bed." msgstr "" #: src/libslic3r/GCode.cpp:669 msgid "Filament Start G-code" msgstr "" #: src/libslic3r/GCode.cpp:676 msgid "Filament End G-code" msgstr "" #: src/libslic3r/GCode.cpp:717 msgid "In the custom G-code were found reserved keywords:" msgstr "" #: src/libslic3r/GCode.cpp:719 msgid "" "This may cause problems in g-code visualization and printing time estimation." msgstr "" #: src/libslic3r/GCode.cpp:1124 src/libslic3r/GCode.cpp:1135 msgid "No extrusions were generated for objects." msgstr "" #: src/libslic3r/GCode.cpp:1328 msgid "" "Your print is very close to the priming regions. Make sure there is no " "collision." msgstr "" #: src/libslic3r/Flow.cpp:61 #, possible-boost-format msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1880 #, possible-boost-format msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1891 msgid "" "The selected 3MF contains FDM supports painted object using a newer version " "of PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1895 msgid "" "The selected 3MF contains seam painted object using a newer version of " "PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1899 msgid "" "The selected 3MF contains multi-material painted object using a newer " "version of PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:1000 #, possible-boost-format msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/GCode/PostProcessor.cpp:289 #, possible-boost-format msgid "" "Post-processing script %1% failed.\n" "\n" "The post-processing script is expected to change the G-code file %2% in " "place, but the G-code file was deleted and likely saved under a new name.\n" "Please adjust the post-processing script to change the G-code in place and " "consult the manual on how to optionally rename the post-processed G-code " "file.\n" msgstr "" #: src/libslic3r/miniz_extension.cpp:91 msgid "undefined error" msgstr "" #: src/libslic3r/miniz_extension.cpp:93 msgid "too many files" msgstr "" #: src/libslic3r/miniz_extension.cpp:95 msgid "file too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:97 msgid "unsupported method" msgstr "" #: src/libslic3r/miniz_extension.cpp:99 msgid "unsupported encryption" msgstr "" #: src/libslic3r/miniz_extension.cpp:101 msgid "unsupported feature" msgstr "" #: src/libslic3r/miniz_extension.cpp:103 msgid "failed finding central directory" msgstr "" #: src/libslic3r/miniz_extension.cpp:105 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:107 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:109 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:111 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:113 msgid "compression failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:115 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/miniz_extension.cpp:117 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:119 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/miniz_extension.cpp:121 msgid "allocation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:123 msgid "file open failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:125 msgid "file create failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:127 msgid "file write failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:129 msgid "file read failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:131 msgid "file close failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:133 msgid "file seek failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:135 msgid "file stat failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:137 msgid "invalid parameter" msgstr "" #: src/libslic3r/miniz_extension.cpp:139 msgid "invalid filename" msgstr "" #: src/libslic3r/miniz_extension.cpp:141 msgid "buffer too small" msgstr "" #: src/libslic3r/miniz_extension.cpp:143 msgid "internal error" msgstr "" #: src/libslic3r/miniz_extension.cpp:145 msgid "file not found" msgstr "" #: src/libslic3r/miniz_extension.cpp:147 msgid "archive is too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:149 msgid "validation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:151 msgid "write calledback failed" msgstr "" #: src/libslic3r/Print.cpp:473 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:476 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:480 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:482 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:486 msgid "" "Avoid crossing perimeters option and avoid crossing curled overhangs option " "cannot be both enabled together." msgstr "" #: src/libslic3r/Print.cpp:495 msgid "" "Only a single object may be printed at a time in Spiral Vase mode. Either " "remove all but the last object, or enable sequential mode by " "\"complete_objects\"." msgstr "" #: src/libslic3r/Print.cpp:499 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:523 msgid "" "The print is taller than the maximum allowed height. You might want to " "reduce the size of your model or change current print settings and retry." msgstr "" #: src/libslic3r/Print.cpp:540 msgid "Variable layer height is not supported with Organic supports." msgstr "" #: src/libslic3r/Print.cpp:553 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:559 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:561 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:563 msgid "" "Ooze prevention is only supported with the wipe tower when " "'single_extruder_multi_material' is off." msgstr "" #: src/libslic3r/Print.cpp:565 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:567 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:577 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:579 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:582 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:584 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:609 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:633 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:646 #, possible-boost-format msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:649 #, possible-boost-format msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:660 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:668 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:708 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:713 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:734 msgid "" "Relative extruder addressing requires resetting the extruder position at " "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " "layer_gcode." msgstr "" #: src/libslic3r/Print.cpp:736 msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" #: src/libslic3r/Print.cpp:738 msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " "extruder addressing." msgstr "" #: src/libslic3r/Print.cpp:880 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:908 msgid "Generating skirt and brim" msgstr "" #: src/libslic3r/Print.cpp:956 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:960 msgid "Generating G-code" msgstr "" #: src/libslic3r/Print.cpp:1169 msgid "Alert if supports needed" msgstr "" #: src/libslic3r/Print.cpp:1174 msgid "long bridging extrusions" msgstr "" #: src/libslic3r/Print.cpp:1175 msgid "floating bridge anchors" msgstr "" #: src/libslic3r/Print.cpp:1178 msgid "collapsing overhang" msgstr "" #: src/libslic3r/Print.cpp:1180 msgid "loose extrusions" msgstr "" #: src/libslic3r/Print.cpp:1183 msgid "low bed adhesion" msgstr "" #: src/libslic3r/Print.cpp:1184 msgid "floating object part" msgstr "" #: src/libslic3r/Print.cpp:1185 msgid "thin fragile section" msgstr "" #: src/libslic3r/Print.cpp:1221 msgid "Detected print stability issues" msgstr "" #: src/libslic3r/Print.cpp:1247 msgid "or" msgstr "" #: src/libslic3r/Print.cpp:1247 msgid "and" msgstr "" #: src/libslic3r/Print.cpp:1247 msgid "brim" msgstr "" #: src/libslic3r/Print.cpp:1248 msgid "Consider enabling supports" msgstr "" #: src/libslic3r/SLA/Pad.cpp:533 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/SLAPrint.cpp:546 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:558 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:564 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:579 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:586 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:693 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:57 msgid "Assembling model from parts" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:58 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:59 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:60 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:61 src/libslic3r/SLAPrintSteps.cpp:691 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:62 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:63 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:64 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:79 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:80 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:255 msgid "" "Mesh to be hollowed is not suitable for hollowing (does not bound a volume)." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:262 msgid "Unable to drill the current configuration of holes into the model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:271 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:279 msgid "Failed to drill some holes into the model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:289 msgid "" "Can't perform full mesh booleans! Some parts of the print will be previewed " "with approximated meshes. This does not affect the quality of slices or the " "physical print in any way." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:510 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:740 src/libslic3r/SLAPrintSteps.cpp:749 #: src/libslic3r/SLAPrintSteps.cpp:787 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:779 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:908 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:84 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:254 src/libslic3r/PrintConfig.cpp:255 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:260 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:265 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:270 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:275 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:277 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:285 msgid "G-code thumbnails" msgstr "" #: src/libslic3r/PrintConfig.cpp:286 msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" #: src/libslic3r/PrintConfig.cpp:292 msgid "Format of G-code thumbnails" msgstr "" #: src/libslic3r/PrintConfig.cpp:293 msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " "QOI for low memory firmware" msgstr "" #: src/libslic3r/PrintConfig.cpp:301 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:308 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:309 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:317 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:318 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" #: src/libslic3r/PrintConfig.cpp:327 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:328 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:336 msgid "Name of the printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:344 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:360 msgid "Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:368 msgid "Ignore HTTPS certificate revocation checks" msgstr "" #: src/libslic3r/PrintConfig.cpp:369 msgid "" "Ignore HTTPS certificate revocation checks in case of missing or offline " "distribution points. One may want to enable this option for self signed " "certificates if connection fails." msgstr "" #: src/libslic3r/PrintConfig.cpp:376 msgid "Printer preset names" msgstr "" #: src/libslic3r/PrintConfig.cpp:377 msgid "Names of presets related to the physical printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:382 msgid "Authorization Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:385 msgid "API key" msgstr "" #: src/libslic3r/PrintConfig.cpp:386 msgid "HTTP digest" msgstr "" #: src/libslic3r/PrintConfig.cpp:406 msgid "Avoid crossing curled overhangs (Experimental)" msgstr "" #: src/libslic3r/PrintConfig.cpp:407 msgid "" "Plan travel moves such that the extruder avoids areas where the filament may " "be curled up. This is mostly happening on steeper rounded overhangs and may " "cause a crash with the nozzle. This feature slows down both the print and " "the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:414 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:415 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:422 msgid "Avoid crossing perimeters - Max detour length" msgstr "" #: src/libslic3r/PrintConfig.cpp:424 msgid "" "The maximum detour length for avoid crossing perimeters. If the detour is " "longer than this value, avoid crossing perimeters is not applied for this " "travel path. Detour length could be specified either as an absolute value or " "as percentage (for example 50%) of a direct travel path." msgstr "" #: src/libslic3r/PrintConfig.cpp:427 msgid "mm or % (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:434 src/libslic3r/PrintConfig.cpp:2927 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:435 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:438 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:445 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:455 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:456 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:467 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:468 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:476 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:478 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:484 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:485 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:487 src/libslic3r/PrintConfig.cpp:742 #: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1261 #: src/libslic3r/PrintConfig.cpp:1447 src/libslic3r/PrintConfig.cpp:1456 #: src/libslic3r/PrintConfig.cpp:1465 src/libslic3r/PrintConfig.cpp:1750 #: src/libslic3r/PrintConfig.cpp:1801 src/libslic3r/PrintConfig.cpp:1812 #: src/libslic3r/PrintConfig.cpp:1822 src/libslic3r/PrintConfig.cpp:2013 #: src/libslic3r/PrintConfig.cpp:2021 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:493 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:495 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:504 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:505 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:506 src/libslic3r/PrintConfig.cpp:596 #: src/libslic3r/PrintConfig.cpp:605 src/libslic3r/PrintConfig.cpp:614 #: src/libslic3r/PrintConfig.cpp:623 src/libslic3r/PrintConfig.cpp:1202 #: src/libslic3r/PrintConfig.cpp:1640 src/libslic3r/PrintConfig.cpp:1830 #: src/libslic3r/PrintConfig.cpp:1893 src/libslic3r/PrintConfig.cpp:2145 #: src/libslic3r/PrintConfig.cpp:2204 src/libslic3r/PrintConfig.cpp:2920 #: src/libslic3r/PrintConfig.cpp:3369 src/libslic3r/PrintConfig.cpp:3595 #: src/libslic3r/PrintConfig.cpp:3870 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:513 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:515 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:525 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:527 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:528 src/libslic3r/PrintConfig.cpp:1009 #: src/libslic3r/PrintConfig.cpp:1017 src/libslic3r/PrintConfig.cpp:1026 #: src/libslic3r/PrintConfig.cpp:1034 src/libslic3r/PrintConfig.cpp:1061 #: src/libslic3r/PrintConfig.cpp:1080 src/libslic3r/PrintConfig.cpp:1386 #: src/libslic3r/PrintConfig.cpp:1579 src/libslic3r/PrintConfig.cpp:1659 #: src/libslic3r/PrintConfig.cpp:1733 src/libslic3r/PrintConfig.cpp:1767 #: src/libslic3r/PrintConfig.cpp:1779 src/libslic3r/PrintConfig.cpp:1789 #: src/libslic3r/PrintConfig.cpp:1852 src/libslic3r/PrintConfig.cpp:1911 #: src/libslic3r/PrintConfig.cpp:2052 src/libslic3r/PrintConfig.cpp:2279 #: src/libslic3r/PrintConfig.cpp:2288 src/libslic3r/PrintConfig.cpp:2810 #: src/libslic3r/PrintConfig.cpp:3027 src/libslic3r/PrintConfig.cpp:3037 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:535 msgid "Enable dynamic overhang speeds" msgstr "" #: src/libslic3r/PrintConfig.cpp:537 msgid "This setting enables dynamic speed control on overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:541 msgid "" "Overhang size is expressed as a percentage of overlap of the extrusion with " "the previous layer: 100% would be full overlap (no overhang), while 0% " "represents full overhang (floating extrusion, bridge). Speeds for overhang " "sizes in between are calculated via linear interpolation. If set as " "percentage, the speed is calculated over the external perimeter speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:547 src/libslic3r/PrintConfig.cpp:594 msgid "speed for 0% overlap (bridge)" msgstr "" #: src/libslic3r/PrintConfig.cpp:550 src/libslic3r/PrintConfig.cpp:559 #: src/libslic3r/PrintConfig.cpp:568 src/libslic3r/PrintConfig.cpp:577 #: src/libslic3r/PrintConfig.cpp:856 src/libslic3r/PrintConfig.cpp:1305 #: src/libslic3r/PrintConfig.cpp:1316 src/libslic3r/PrintConfig.cpp:2387 #: src/libslic3r/PrintConfig.cpp:2440 src/libslic3r/PrintConfig.cpp:2765 #: src/libslic3r/PrintConfig.cpp:2997 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:556 src/libslic3r/PrintConfig.cpp:603 msgid "speed for 25% overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:565 src/libslic3r/PrintConfig.cpp:612 msgid "speed for 50% overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:574 src/libslic3r/PrintConfig.cpp:621 msgid "speed for 75% overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:583 msgid "Enable dynamic fan speeds" msgstr "" #: src/libslic3r/PrintConfig.cpp:584 msgid "This setting enables dynamic fan speed control on overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:589 msgid "" "Overhang size is expressed as a percentage of overlap of the extrusion with " "the previous layer: 100% would be full overlap (no overhang), while 0% " "represents full overhang (floating extrusion, bridge). Fan speeds for " "overhang sizes in between are calculated via linear interpolation. " msgstr "" #: src/libslic3r/PrintConfig.cpp:630 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:632 msgid "" "The horizontal width of the brim that will be printed around each object on " "the first layer. When raft is used, no brim is generated (use " "raft_first_layer_expansion)." msgstr "" #: src/libslic3r/PrintConfig.cpp:641 msgid "Brim type" msgstr "" #: src/libslic3r/PrintConfig.cpp:643 msgid "" "The places where the brim will be printed around each object on the first " "layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:645 msgid "No brim" msgstr "" #: src/libslic3r/PrintConfig.cpp:646 msgid "Outer brim only" msgstr "" #: src/libslic3r/PrintConfig.cpp:647 msgid "Inner brim only" msgstr "" #: src/libslic3r/PrintConfig.cpp:648 msgid "Outer and inner brim" msgstr "" #: src/libslic3r/PrintConfig.cpp:654 msgid "Brim separation gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:656 msgid "" "Offset of brim from the printed object. The offset is applied after the " "elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:663 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:664 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:674 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:675 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:689 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:690 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:707 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:708 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:716 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:717 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:722 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:723 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:730 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:731 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:739 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:748 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:749 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:755 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:756 src/libslic3r/PrintConfig.cpp:3819 #: src/libslic3r/PrintConfig.cpp:3830 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:762 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:763 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:772 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:774 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:780 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:781 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:789 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:799 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:810 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:812 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:815 src/libslic3r/PrintConfig.cpp:1228 #: src/libslic3r/PrintConfig.cpp:2776 src/libslic3r/PrintConfig.cpp:2791 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:816 msgid "Monotonic" msgstr "" #: src/libslic3r/PrintConfig.cpp:817 msgid "Monotonic Lines" msgstr "" #: src/libslic3r/PrintConfig.cpp:818 src/libslic3r/PrintConfig.cpp:1229 msgid "Aligned Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:1235 #: src/libslic3r/PrintConfig.cpp:2792 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:820 src/libslic3r/PrintConfig.cpp:1239 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:821 src/libslic3r/PrintConfig.cpp:1240 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:822 src/libslic3r/PrintConfig.cpp:1241 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:830 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:832 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:839 src/libslic3r/PrintConfig.cpp:851 #: src/libslic3r/PrintConfig.cpp:2018 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:841 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:844 src/libslic3r/PrintConfig.cpp:958 #: src/libslic3r/PrintConfig.cpp:1283 src/libslic3r/PrintConfig.cpp:1491 #: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1570 #: src/libslic3r/PrintConfig.cpp:2041 src/libslic3r/PrintConfig.cpp:2428 #: src/libslic3r/PrintConfig.cpp:2601 src/libslic3r/PrintConfig.cpp:2686 #: src/libslic3r/PrintConfig.cpp:2983 src/libslic3r/PrintConfig.cpp:3204 #: src/libslic3r/PrintConfig.cpp:3219 src/libslic3r/PrintConfig.cpp:3253 #: src/libslic3r/PrintConfig.cpp:3265 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:853 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:863 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:865 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:871 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:873 msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:880 msgid "Extra perimeters on overhangs (Experimental)" msgstr "" #: src/libslic3r/PrintConfig.cpp:882 msgid "" "Detect overhang areas where bridges cannot be anchored, and fill them with " "extra perimeter paths. These paths are anchored to the nearby non-overhang " "area when possible." msgstr "" #: src/libslic3r/PrintConfig.cpp:890 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:898 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:909 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:919 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:920 src/libslic3r/PrintConfig.cpp:983 #: src/libslic3r/PrintConfig.cpp:3666 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:926 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:927 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:936 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:937 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:942 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:943 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:952 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:954 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:966 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:967 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:972 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:973 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:975 src/libslic3r/PrintConfig.cpp:2375 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:982 src/libslic3r/PrintConfig.cpp:3665 msgid "Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:988 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:989 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:997 src/libslic3r/PrintConfig.cpp:1858 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:998 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:1007 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1008 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:1015 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:1016 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:1023 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1024 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1032 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:1033 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:1040 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:1041 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:1050 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:1051 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:1059 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:1060 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1067 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:1068 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:1072 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:1078 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:1079 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1086 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:1087 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:1094 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1095 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1101 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:1102 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:1110 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:1117 src/libslic3r/PrintConfig.cpp:3709 #: src/libslic3r/PrintConfig.cpp:3710 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:1118 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1121 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:1126 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1127 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:1155 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1156 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:1162 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:1163 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:1168 msgid "Spool weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:1169 msgid "" "Enter weight of the empty filament spool. One may weigh a partially consumed " "filament spool before printing and one may compare the measured weight with " "the calculated weight of the filament with the spool to find out whether the " "amount of filament on the spool is sufficient to finish the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1173 msgid "g" msgstr "" #: src/libslic3r/PrintConfig.cpp:1182 src/libslic3r/PrintConfig.cpp:3814 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1186 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:1188 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:1199 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:1201 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:1224 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:1226 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1230 src/libslic3r/PrintConfig.cpp:2822 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1232 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:1233 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1234 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:1236 src/libslic3r/PrintConfig.cpp:2778 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:1237 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:1238 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1242 msgid "Adaptive Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1243 msgid "Support Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1244 msgid "Lightning" msgstr "" #: src/libslic3r/PrintConfig.cpp:1250 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1258 msgid "First object layer over raft interface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1259 msgid "" "This is the acceleration your printer will use for first layer of object " "above raft interface. Set zero to disable acceleration control for first " "layer of object above raft interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:1268 msgid "First layer bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:1269 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:1279 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1293 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates." msgstr "" #: src/libslic3r/PrintConfig.cpp:1301 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1302 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1312 msgid "Speed of object first layer over raft interface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1313 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first object layer above raft interface, regardless " "of their type. If expressed as a percentage (for example: 40%) it will scale " "the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1323 msgid "First layer nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:1324 msgid "" "Nozzle temperature for the first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:1332 msgid "Full fan speed at layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:1333 msgid "" "Fan speed will be ramped up linearly from zero at layer " "\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " "\"full_fan_speed_layer\" will be ignored if lower than " "\"disable_fan_first_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"disable_fan_first_layers\" + 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1345 msgid "Fuzzy skin type." msgstr "" #: src/libslic3r/PrintConfig.cpp:1348 msgid "Outside walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:1349 msgid "All walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:1355 msgid "Fuzzy skin thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:1357 msgid "" "The maximum distance that each skin point can be offset (both ways), " "measured perpendicular to the perimeter wall." msgstr "" #: src/libslic3r/PrintConfig.cpp:1365 msgid "Fuzzy skin point distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1367 msgid "" "Perimeters will be split into multiple segments by inserting Fuzzy skin " "points. Lowering the Fuzzy skin point distance will increase the number of " "randomly offset points on the perimeter wall." msgstr "" #: src/libslic3r/PrintConfig.cpp:1375 msgid "Fill gaps" msgstr "" #: src/libslic3r/PrintConfig.cpp:1377 msgid "" "Enables filling of gaps between perimeters and between the inner most " "perimeters and infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1382 msgid "Gap fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:1384 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:1392 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1393 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:1400 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1401 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:1416 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:1422 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:1423 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1430 msgid "G-code substitutions" msgstr "" #: src/libslic3r/PrintConfig.cpp:1431 msgid "Find / replace patterns in G-code lines and substitute them." msgstr "" #: src/libslic3r/PrintConfig.cpp:1436 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1437 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:1445 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1453 src/libslic3r/PrintConfig.cpp:2423 #: src/libslic3r/PrintConfig.cpp:2435 msgid "Solid infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:1454 msgid "" "This is the acceleration your printer will use for solid infill. Set zero to " "use the value for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1462 src/libslic3r/PrintConfig.cpp:2977 #: src/libslic3r/PrintConfig.cpp:2990 msgid "Top solid infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:1463 msgid "" "This is the acceleration your printer will use for top solid infill. Set " "zero to use the value for solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1472 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1474 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:1477 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1483 msgid "Length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1485 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " "anchor_length_max. Set this parameter to zero to disable anchoring " "perimeters connected to a single infill line." msgstr "" #: src/libslic3r/PrintConfig.cpp:1495 msgid "0 (no open anchors)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1496 src/libslic3r/PrintConfig.cpp:1519 msgid "1 mm" msgstr "" #: src/libslic3r/PrintConfig.cpp:1497 src/libslic3r/PrintConfig.cpp:1520 msgid "2 mm" msgstr "" #: src/libslic3r/PrintConfig.cpp:1498 src/libslic3r/PrintConfig.cpp:1521 msgid "5 mm" msgstr "" #: src/libslic3r/PrintConfig.cpp:1499 src/libslic3r/PrintConfig.cpp:1522 msgid "10 mm" msgstr "" #: src/libslic3r/PrintConfig.cpp:1500 src/libslic3r/PrintConfig.cpp:1523 msgid "1000 (unlimited)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1506 msgid "Maximum length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1508 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " "parameter. Set this parameter to zero to disable anchoring." msgstr "" #: src/libslic3r/PrintConfig.cpp:1518 msgid "0 (not anchored)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1529 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1531 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1539 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1550 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1551 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1556 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1558 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1565 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1567 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1578 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1586 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1587 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1600 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1601 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1609 msgid "Maximum width of a segmented region" msgstr "" #: src/libslic3r/PrintConfig.cpp:1610 msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" #: src/libslic3r/PrintConfig.cpp:1611 src/libslic3r/PrintConfig.cpp:2219 #: src/libslic3r/PrintConfig.cpp:2228 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1618 msgid "Enable ironing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1619 msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1625 src/libslic3r/PrintConfig.cpp:1627 msgid "Ironing Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1629 msgid "All top surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1630 msgid "Topmost surface only" msgstr "" #: src/libslic3r/PrintConfig.cpp:1631 msgid "All solid surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1637 msgid "Flow rate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1639 msgid "Percent of a flow rate relative to object's normal layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1647 msgid "Spacing between ironing passes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1649 msgid "Distance between ironing lines" msgstr "" #: src/libslic3r/PrintConfig.cpp:1666 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1677 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1678 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1686 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1687 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1692 msgid "How to apply limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1693 msgid "Purpose of Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1695 msgid "How to apply the Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1697 msgid "Emit to G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1698 msgid "Use for time estimate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1699 msgid "Ignore" msgstr "" #: src/libslic3r/PrintConfig.cpp:1723 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1724 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1725 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1726 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1729 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1730 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1731 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1732 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1740 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1741 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1742 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1743 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1746 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1747 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1748 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1749 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1757 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1758 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1759 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1760 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1763 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1764 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1765 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1766 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1776 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1778 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1786 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1788 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1796 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1798 msgid "" "Maximum acceleration when extruding (M204 P)\n" "\n" "Marlin (legacy) firmware flavor will use this also as travel acceleration " "(M204 T)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1809 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1811 msgid "Maximum acceleration when retracting (M204 R)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1819 msgid "Maximum acceleration for travel moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:1821 msgid "Maximum acceleration for travel moves (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1828 src/libslic3r/PrintConfig.cpp:1837 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1829 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1838 msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1848 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1849 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1859 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1867 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1868 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate for a transition from lower speed to higher speed. A value of 1.8 mm³/" "s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45 mm " "extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s " "(feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1873 src/libslic3r/PrintConfig.cpp:1885 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1879 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1880 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate for a transition from higher speed to lower speed. A value of 1.8 mm³/" "s² ensures, that a change from the extrusion rate of 5.4 mm³/s (0.45 mm " "extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s " "(feedrate 20 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1891 src/libslic3r/PrintConfig.cpp:1900 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1892 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1901 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1909 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1910 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1917 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1918 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1927 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1928 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1938 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1943 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1944 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1961 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1962 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1969 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. " msgstr "" #: src/libslic3r/PrintConfig.cpp:1974 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1975 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1984 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1986 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1992 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1993 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:2001 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2002 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:2010 src/libslic3r/PrintConfig.cpp:2035 #: src/libslic3r/PrintConfig.cpp:2049 src/libslic3r/PrintConfig.cpp:2059 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:2011 msgid "" "This is the acceleration your printer will use for perimeters. Set zero to " "disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:2019 msgid "" "This is the acceleration your printer will use for external perimeters. Set " "zero to use the value for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:2026 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2028 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:2037 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2051 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2061 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:2065 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2073 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:2085 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:2086 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2091 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2092 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2100 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2101 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:2106 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:2107 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:2124 msgid "Raft contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2126 msgid "" "The vertical distance between object and raft. Ignored for soluble interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2133 msgid "Raft expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2135 msgid "Expansion of the raft in XY plane for better stability." msgstr "" #: src/libslic3r/PrintConfig.cpp:2142 msgid "First layer density" msgstr "" #: src/libslic3r/PrintConfig.cpp:2144 msgid "Density of the first raft or support layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2152 msgid "First layer expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2154 msgid "" "Expansion of the first raft or support layer to improve adhesion to print " "bed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2161 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2163 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:2171 msgid "Slice resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:2172 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:2182 msgid "G-code resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:2183 msgid "" "Maximum deviation of exported G-code paths from their full resolution " "counterparts. Very high resolution G-code requires huge amount of RAM to " "slice and preview, also a 3D printer may stutter not being able to process a " "high resolution G-code in a timely manner. On the other hand, a low " "resolution G-code will produce a low poly effect and because the G-code " "reduction is performed at each layer independently, visible artifacts may be " "produced." msgstr "" #: src/libslic3r/PrintConfig.cpp:2194 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2195 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:2201 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:2202 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:2209 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2210 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:2215 src/libslic3r/PrintConfig.cpp:2223 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2216 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2217 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2224 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2225 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2233 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2234 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:2241 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2242 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:2243 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2250 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2251 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:2252 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2260 src/libslic3r/PrintConfig.cpp:2268 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:2261 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2269 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:2276 src/libslic3r/PrintConfig.cpp:2277 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:2278 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2284 src/libslic3r/PrintConfig.cpp:2285 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:2286 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:2293 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:2295 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:2297 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:2298 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:2299 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:2306 msgid "Staggered inner seams" msgstr "" #: src/libslic3r/PrintConfig.cpp:2307 msgid "" "This option causes the inner seams to be shifted backwards based on their " "depth, forming a zigzag pattern." msgstr "" #: src/libslic3r/PrintConfig.cpp:2314 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2316 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:2317 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2324 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2326 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2327 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2334 msgid "Distance from brim/object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2335 msgid "" "Distance between skirt and brim (when draft shield is not used) or objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:2341 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2342 msgid "Height of skirt expressed in layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2348 msgid "Draft shield" msgstr "" #: src/libslic3r/PrintConfig.cpp:2349 msgid "" "With draft shield active, the skirt will be printed skirt_distance from the " "object, possibly intersecting brim.\n" "Enabled = skirt is as tall as the highest printed object.\n" "Limited = skirt is as tall as specified by skirt_height.\n" "This is useful to protect an ABS or ASA print from warping and detaching " "from print bed due to wind draft." msgstr "" #: src/libslic3r/PrintConfig.cpp:2354 msgid "Disabled" msgstr "" #: src/libslic3r/PrintConfig.cpp:2355 msgid "Limited" msgstr "" #: src/libslic3r/PrintConfig.cpp:2356 msgid "Enabled" msgstr "" #: src/libslic3r/PrintConfig.cpp:2362 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2363 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2364 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:2372 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:2373 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:2382 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:2384 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2394 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:2396 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2397 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:2403 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2405 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:2411 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:2413 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2425 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2437 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2449 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2455 src/libslic3r/PrintConfig.cpp:2456 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:2462 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:2463 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than one single object." msgstr "" #: src/libslic3r/PrintConfig.cpp:2471 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2472 msgid "" "Temperature difference to be applied when an extruder is not active. The " "value is not used when 'idle_temperature' in filament settings is defined." msgstr "" #: src/libslic3r/PrintConfig.cpp:2483 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:2498 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:2514 msgid "Color change G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2515 msgid "This G-code will be used as a code for the color change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2524 msgid "This G-code will be used as a code for the pause print" msgstr "" #: src/libslic3r/PrintConfig.cpp:2533 msgid "This G-code will be used as a custom code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2541 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2542 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:2547 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:2548 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2553 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2554 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2561 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2563 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:2571 msgid "Slicing Mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2573 msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." msgstr "" #: src/libslic3r/PrintConfig.cpp:2575 msgid "Regular" msgstr "" #: src/libslic3r/PrintConfig.cpp:2576 msgid "Even-odd" msgstr "" #: src/libslic3r/PrintConfig.cpp:2577 msgid "Close holes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2583 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2585 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2589 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2591 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:2597 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2599 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:2610 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2612 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:2622 src/libslic3r/PrintConfig.cpp:3411 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2627 msgid "Top contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2629 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2635 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2636 msgid "0.1 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2637 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2643 msgid "Bottom contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2645 msgid "" "The vertical distance between the object top surface and the support " "material interface. If set to zero, support_material_contact_distance will " "be used for both top and bottom contact Z distances." msgstr "" #: src/libslic3r/PrintConfig.cpp:2651 src/libslic3r/PrintConfig.cpp:2732 msgid "Same as top" msgstr "" #: src/libslic3r/PrintConfig.cpp:2659 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:2661 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:2666 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2672 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2674 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2683 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2693 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2695 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2700 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2702 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:2709 msgid "Top interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2711 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2715 src/libslic3r/PrintConfig.cpp:2733 msgid "0 (off)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2716 src/libslic3r/PrintConfig.cpp:2734 msgid "1 (light)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2717 src/libslic3r/PrintConfig.cpp:2735 msgid "2 (default)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2718 src/libslic3r/PrintConfig.cpp:2736 msgid "3 (heavy)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2724 msgid "Bottom interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2726 msgid "" "Number of interface layers to insert between the object(s) and support " "material. Set to -1 to use support_material_interface_layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2742 msgid "Closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2744 msgid "" "For snug supports, the support regions will be merged using morphological " "closing operation. Gaps smaller than the closing radius will be filled in." msgstr "" #: src/libslic3r/PrintConfig.cpp:2752 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2754 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2761 msgid "Support material interface" msgstr "" #: src/libslic3r/PrintConfig.cpp:2763 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2772 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2774 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2777 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2784 msgid "Interface pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2786 msgid "" "Pattern used to generate support material interface. Default pattern for non-" "soluble support interface is Rectilinear, while default pattern for soluble " "support interface is Concentric." msgstr "" #: src/libslic3r/PrintConfig.cpp:2798 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2800 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2809 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2818 msgid "" "Style and shape of the support towers. Projecting the supports into a " "regular grid will create more stable supports, while snug support towers " "will save material and reduce object scarring." msgstr "" #: src/libslic3r/PrintConfig.cpp:2823 msgid "Snug" msgstr "" #: src/libslic3r/PrintConfig.cpp:2824 msgid "Organic" msgstr "" #: src/libslic3r/PrintConfig.cpp:2830 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2832 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive. This option " "is only available when top contact Z distance is set to zero." msgstr "" #: src/libslic3r/PrintConfig.cpp:2839 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2841 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2853 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2855 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2861 msgid "Maximum Branch Angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2863 msgid "" "The maximum angle of the branches, when the branches have to avoid the " "model. Use a lower angle to make them more vertical and more stable. Use a " "higher angle to be able to have more reach." msgstr "" #: src/libslic3r/PrintConfig.cpp:2872 msgid "Preferred Branch Angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2874 msgid "" "The preferred angle of the branches, when they do not have to avoid the " "model. Use a lower angle to make them more vertical and more stable. Use a " "higher angle for branches to merge faster." msgstr "" #: src/libslic3r/PrintConfig.cpp:2883 msgid "Tip Diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2885 msgid "The diameter of the top of the tip of the branches of organic support." msgstr "" #: src/libslic3r/PrintConfig.cpp:2892 msgid "Branch Diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2894 msgid "" "The diameter of the thinnest branches of organic support. Thicker branches " "are more sturdy. Branches towards the base will be thicker than this." msgstr "" #: src/libslic3r/PrintConfig.cpp:2902 msgid "Branch Diameter Angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2904 msgid "" "The angle of the branches' diameter as they gradually become thicker towards " "the bottom. An angle of 0 will cause the branches to have uniform thickness " "over their length. A bit of an angle can increase stability of the organic " "support." msgstr "" #: src/libslic3r/PrintConfig.cpp:2914 msgid "Branch Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:2916 msgid "" "Adjusts the density of the support structure used to generate the tips of " "the branches. A higher value results in better overhangs but the supports " "are harder to remove, thus it is recommended to enable top support " "interfaces instead of a high branch density value if dense interfaces are " "needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2928 msgid "" "Nozzle temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:2931 msgid "Nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2937 msgid "Thick bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:2939 msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " "look worse. If disabled, bridges look better but are reliable just for " "shorter bridged distances." msgstr "" #: src/libslic3r/PrintConfig.cpp:2945 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2947 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2953 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2954 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2966 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} " "and {next_extruder} can be used. When a tool-changing command which changes " "to the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2979 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2992 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:3007 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:3008 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:3016 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:3019 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3026 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3034 msgid "Z travel" msgstr "" #: src/libslic3r/PrintConfig.cpp:3035 msgid "" "Speed for movements along the Z axis.\n" "When set to zero, the value is ignored and regular travel speed is used " "instead." msgstr "" #: src/libslic3r/PrintConfig.cpp:3043 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3044 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:3050 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:3051 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:3057 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:3058 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:3068 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:3069 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:3075 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:3076 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:3083 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:3089 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:3090 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:3096 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:3097 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:3106 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3107 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:3113 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3114 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:3120 msgid "Width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3121 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:3127 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3128 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:3134 src/libslic3r/PrintConfig.cpp:3135 msgid "Wipe tower brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3143 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:3144 msgid "" "Purging after toolchange will be done inside this object's infills. This " "lowers the amount of waste but may result in longer print time due to " "additional travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:3151 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:3152 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:3158 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3159 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:3165 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3167 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:3175 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:3176 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3185 msgid "Perimeter generator" msgstr "" #: src/libslic3r/PrintConfig.cpp:3187 msgid "" "Classic perimeter generator produces perimeters with constant extrusion " "width and for very thin areas is used gap-fill. Arachne engine produces " "perimeters with variable extrusion width. This setting also affects the " "Concentric infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:3192 msgid "Classic" msgstr "" #: src/libslic3r/PrintConfig.cpp:3193 msgid "Arachne" msgstr "" #: src/libslic3r/PrintConfig.cpp:3199 msgid "Perimeter transition length" msgstr "" #: src/libslic3r/PrintConfig.cpp:3201 msgid "" "When transitioning between different numbers of perimeters as the part " "becomes thinner, a certain amount of space is allotted to split or join the " "perimeter segments. If expressed as a percentage (for example 100%), it will " "be computed based on the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:3210 msgid "Perimeter transitioning filter margin" msgstr "" #: src/libslic3r/PrintConfig.cpp:3212 msgid "" "Prevent transitioning back and forth between one extra perimeter and one " "less. This margin extends the range of extrusion widths which follow to " "[Minimum perimeter width - margin, 2 * Minimum perimeter width + margin]. " "Increasing this margin reduces the number of transitions, which reduces the " "number of extrusion starts/stops and travel time. However, large extrusion " "width variation can lead to under- or overextrusion problems. If expressed " "as a percentage (for example 25%), it will be computed based on the nozzle " "diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:3225 msgid "Perimeter transitioning threshold angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3227 msgid "" "When to create transitions between even and odd numbers of perimeters. A " "wedge shape with an angle greater than this setting will not have " "transitions and no perimeters will be printed in the center to fill the " "remaining space. Reducing this setting reduces the number and length of " "these center perimeters, but may leave gaps or overextrude." msgstr "" #: src/libslic3r/PrintConfig.cpp:3238 msgid "Perimeter distribution count" msgstr "" #: src/libslic3r/PrintConfig.cpp:3240 msgid "" "The number of perimeters, counted from the center, over which the variation " "needs to be spread. Lower values mean that the outer perimeters don't change " "in width." msgstr "" #: src/libslic3r/PrintConfig.cpp:3247 msgid "Minimum feature size" msgstr "" #: src/libslic3r/PrintConfig.cpp:3249 msgid "" "Minimum thickness of thin features. Model features that are thinner than " "this value will not be printed, while features thicker than the Minimum " "feature size will be widened to the Minimum perimeter width. If expressed as " "a percentage (for example 25%), it will be computed based on the nozzle " "diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:3259 msgid "Minimum perimeter width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3261 msgid "" "Width of the perimeter that will replace thin features (according to the " "Minimum feature size) of the model. If the Minimum perimeter width is " "thinner than the thickness of the feature, the perimeter will become as " "thick as the feature itself. If expressed as a percentage (for example 85%), " "it will be computed based on the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:3327 msgid "Pinhead front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3329 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:3336 msgid "Head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3338 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:3345 msgid "Pinhead width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3347 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3355 msgid "Pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3357 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:3365 msgid "Small pillar diameter percent" msgstr "" #: src/libslic3r/PrintConfig.cpp:3367 msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" #: src/libslic3r/PrintConfig.cpp:3376 msgid "Max bridges on a pillar" msgstr "" #: src/libslic3r/PrintConfig.cpp:3378 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" #: src/libslic3r/PrintConfig.cpp:3386 msgid "Max weight on model" msgstr "" #: src/libslic3r/PrintConfig.cpp:3389 msgid "" "Maximum weight of sub-trees that terminate on the model instead of the print " "bed. The weight is the sum of the lenghts of all branches emanating from the " "endpoint." msgstr "" #: src/libslic3r/PrintConfig.cpp:3397 msgid "Pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:3398 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:3404 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:3404 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:3404 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:3416 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:3420 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase. The exact amount of " "increase is unspecified and can change in the future." msgstr "" #: src/libslic3r/PrintConfig.cpp:3431 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3433 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:3441 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3443 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:3450 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3453 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3463 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3465 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:3473 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:3475 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:3487 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3489 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:3499 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:3515 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3516 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:3521 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3522 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:3527 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:3529 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3535 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3540 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:3541 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:3542 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:3547 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:3548 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:3549 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:3554 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3555 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3559 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:3560 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:3566 src/libslic3r/PrintConfig.cpp:4058 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:3567 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3568 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3575 src/libslic3r/PrintConfig.cpp:4057 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:3576 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3577 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3584 src/libslic3r/PrintConfig.cpp:4059 msgid "High viscosity" msgstr "" #: src/libslic3r/PrintConfig.cpp:3585 msgid "Tilt for high viscosity resin" msgstr "" #: src/libslic3r/PrintConfig.cpp:3586 msgid "Time of the super slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3593 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:3594 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3601 src/libslic3r/PrintConfig.cpp:3602 #: src/libslic3r/PrintConfig.cpp:3603 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3609 src/libslic3r/PrintConfig.cpp:3611 msgid "Printer scaling correction in X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3610 msgid "Printer scaling X axis correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3617 src/libslic3r/PrintConfig.cpp:3619 msgid "Printer scaling correction in Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3618 msgid "Printer scaling Y axis correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3625 src/libslic3r/PrintConfig.cpp:3627 msgid "Printer scaling correction in Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3626 msgid "Printer scaling Z axis correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3633 src/libslic3r/PrintConfig.cpp:3634 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3635 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:3641 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3643 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:3650 src/libslic3r/PrintConfig.cpp:3651 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3652 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:3671 src/libslic3r/PrintConfig.cpp:3672 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:3679 src/libslic3r/PrintConfig.cpp:3680 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3686 msgid "Idle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:3687 msgid "" "Nozzle temperature when the tool is currently not used in multi-tool setups." "This is only used when 'Ooze prevention' is active in Print Settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:3695 src/libslic3r/PrintConfig.cpp:3696 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:3697 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:3702 src/libslic3r/PrintConfig.cpp:3703 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:3704 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:3711 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:3718 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3723 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:3724 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3731 src/libslic3r/PrintConfig.cpp:3732 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3739 src/libslic3r/PrintConfig.cpp:3740 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3747 src/libslic3r/PrintConfig.cpp:3748 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3754 src/libslic3r/PrintConfig.cpp:3755 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3762 src/libslic3r/PrintConfig.cpp:3763 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3770 src/libslic3r/PrintConfig.cpp:3771 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3777 src/libslic3r/PrintConfig.cpp:3778 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:3784 src/libslic3r/PrintConfig.cpp:3785 msgid "Correction for expansion in X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3791 src/libslic3r/PrintConfig.cpp:3792 msgid "Correction for expansion in Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3798 src/libslic3r/PrintConfig.cpp:3799 msgid "Correction for expansion in Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3805 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:3806 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:3818 src/libslic3r/PrintConfig.cpp:3829 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:3840 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:3842 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:3847 msgid "Support tree type" msgstr "" #: src/libslic3r/PrintConfig.cpp:3848 msgid "Support tree building strategy" msgstr "" #: src/libslic3r/PrintConfig.cpp:3851 msgid "Branching (experimental)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3860 msgid "Support only in enforced regions" msgstr "" #: src/libslic3r/PrintConfig.cpp:3862 msgid "Only create support if it lies in a support enforcer." msgstr "" #: src/libslic3r/PrintConfig.cpp:3869 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:3875 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:3877 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:3883 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:3885 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:3890 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3892 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3900 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3901 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:3914 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:3915 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:3925 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3927 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3947 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:3949 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3960 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3965 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3967 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3972 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:3974 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:3983 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:3985 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3992 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3994 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:4001 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:4004 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:4011 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:4013 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:4018 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:4020 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:4028 msgid "Accuracy" msgstr "" #: src/libslic3r/PrintConfig.cpp:4030 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:4040 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:4052 msgid "Print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:4054 msgid "" "A slower printing profile might be necessary when using materials with " "higher viscosity or with some hollowed parts. It slows down the tilt " "movement and adds a delay before exposure." msgstr "" #: src/libslic3r/PrintConfig.cpp:4065 msgid "Format of the output SLA archive" msgstr "" #: src/libslic3r/PrintConfig.cpp:4070 msgid "SLA output precision" msgstr "" #: src/libslic3r/PrintConfig.cpp:4071 msgid "Minimum resolution in nanometers" msgstr "" #: src/libslic3r/PrintConfig.cpp:4542 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:4543 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:4554 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:4555 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:4560 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:4561 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:4565 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:4566 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:4570 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:4571 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:4576 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:4581 msgid "G-code viewer" msgstr "" #: src/libslic3r/PrintConfig.cpp:4582 msgid "Visualize an already sliced and saved G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:4588 msgid "OpenGL version" msgstr "" #: src/libslic3r/PrintConfig.cpp:4589 msgid "Select the specified OpenGL version" msgstr "" #: src/libslic3r/PrintConfig.cpp:4594 msgid "OpenGL debug output" msgstr "" #: src/libslic3r/PrintConfig.cpp:4595 msgid "Activate OpenGL debug output on graphic cards which support it" msgstr "" #: src/libslic3r/PrintConfig.cpp:4601 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:4602 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:4607 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:4608 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:4613 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:4614 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:4618 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:4619 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:4623 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:4624 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:4628 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:4629 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:4639 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:4640 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:4645 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:4666 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:4667 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:4671 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:4672 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:4675 msgid "Ensure on bed" msgstr "" #: src/libslic3r/PrintConfig.cpp:4676 msgid "" "Lift the object above the bed when it is partially below. Enabled by " "default, use --no-ensure-on-bed to disable." msgstr "" #: src/libslic3r/PrintConfig.cpp:4680 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:4681 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:4685 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:4686 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:4690 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:4695 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4699 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4703 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:4704 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4708 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:4709 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4714 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:4719 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:4722 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:4723 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:4727 msgid "Delete files after loading" msgstr "" #: src/libslic3r/PrintConfig.cpp:4728 msgid "Delete files after loading." msgstr "" #: src/libslic3r/PrintConfig.cpp:4736 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:4737 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:4740 msgid "" "Forward-compatibility rule when loading configurations from config files and " "project files (3MF, AMF)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4741 msgid "" "This version of PrusaSlicer may not understand configurations produced by " "the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend " "the list of supported firmware flavors. One may decide to bail out or to " "substitute an unknown value with a default silently or verbosely." msgstr "" #: src/libslic3r/PrintConfig.cpp:4745 msgid "Bail out on unknown configuration values" msgstr "" #: src/libslic3r/PrintConfig.cpp:4746 msgid "" "Enable reading unknown configuration values by verbosely substituting them " "with defaults." msgstr "" #: src/libslic3r/PrintConfig.cpp:4747 msgid "" "Enable reading unknown configuration values by silently substituting them " "with defaults." msgstr "" #: src/libslic3r/PrintConfig.cpp:4752 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:4753 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:4756 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:4757 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4761 msgid "Single instance mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:4762 msgid "" "If enabled, the command line arguments are sent to an existing instance of " "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides " "the \"single_instance\" configuration value from application preferences." msgstr "" #: src/libslic3r/PrintConfig.cpp:4767 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:4768 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:4771 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:4772 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:4778 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:4779 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/Zipper.cpp:27 msgid "Error with zip archive" msgstr "" #: src/libslic3r/PrintObject.cpp:152 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:257 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:402 msgid "making infill" msgstr "" #: src/libslic3r/PrintObject.cpp:449 msgid "Searching support spots" msgstr "" #: src/libslic3r/PrintObject.cpp:474 msgid "Generating support material" msgstr "" #: src/libslic3r/PrintObject.cpp:495 msgid "Estimating curled extrusions" msgstr "" #: resources/data/hints.ini: [hint:Fuzzy skin] msgid "Fuzzy skin\nDid you know that you can create rough fibre-like texture on the sides of your models using theFuzzy skinfeature? You can also use modifiers to apply fuzzy-skin only to a portion of your model." msgstr "" #: resources/data/hints.ini: [hint:Shapes gallery] msgid "Shapes gallery\nDid you know that PrusaSlicer has a Shapes Gallery? You can use the included models as modifiers, negative volumes or as printable objects. Right-click the platter and selectAdd Shape - Gallery." msgstr "" #: resources/data/hints.ini: [hint:Arrange settings] msgid "Arrange settings\nDid you know that you can right-click theArrange iconto adjust the size of the gap between objects and to allow automatic rotations?" msgstr "" #: resources/data/hints.ini: [hint:Negative volume] msgid "Negative volume\nDid you know that you can subtract one mesh from another using the Negative volume modifier? That way you can, for example, create easily resizable holes directly in PrusaSlicer. Read more in the documentation. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Simplify mesh] msgid "Simplify mesh\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Reload from disk] msgid "Reload from disk\nDid you know that if you created a newer version of your model, you can simply reload it in PrusaSlicer? Right-click the model in the 3D view and choose Reload from disk. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Hiding sidebar] msgid "Hiding sidebar\nDid you know that you can hide the right sidebar using the shortcut Shift+Tab? You can also enable the icon for this from thePreferences." msgstr "" #: resources/data/hints.ini: [hint:Perspective camera] msgid "Perspective camera\nDid you know that you can use the K key to quickly switch between an orthographic and perspective camera?" msgstr "" #: resources/data/hints.ini: [hint:Camera Views] msgid "Camera Views\nDid you know that you can use the number keys 0-6 to quickly switch between predefined camera angles?" msgstr "" #: resources/data/hints.ini: [hint:Place on face] msgid "Place on face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select thePlace on facefunction or press the F key." msgstr "" #: resources/data/hints.ini: [hint:Set number of instances] msgid "Set number of instances\nDid you know that you can right-click a model and set an exact number of instances instead of copy-pasting it several times?" msgstr "" #: resources/data/hints.ini: [hint:Combine infill] msgid "Combine infill\nDid you know that you can print the infill with a higher layer height compared to perimeters to save print time using the settingCombine infill every." msgstr "" #: resources/data/hints.ini: [hint:Variable layer height] msgid "Variable layer height\nDid you know that you can print different regions of your model with a different layer height and smooth the transitions between them? Try theVariable layer height tool. (Not available for SLA printers.)" msgstr "" #: resources/data/hints.ini: [hint:Undo/redo history] msgid "Undo/redo history\nDid you know that you can right-click theundo/redo arrowsto see the history of changes and to undo or redo several actions at once?" msgstr "" #: resources/data/hints.ini: [hint:Different layer height for each model] msgid "Different layer height for each model\nDid you know that you can print each model on the plater with a different layer height? Right-click the model in the 3D view, choose Layers and Perimeters and adjust the values in the right panel. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Solid infill threshold area] msgid "Solid infill threshold area\nDid you know that you can make parts of your model with a small cross-section be filled with solid infill automatically? Set theSolid infill threshold area. (Expert mode only.)" msgstr "" #: resources/data/hints.ini: [hint:Search functionality] msgid "Search functionality\nDid you know that you use theSearchtool to quickly find a specific PrusaSlicer setting? Or use the familiar shortcut Ctrl+F." msgstr "" #: resources/data/hints.ini: [hint:Box selection] msgid "Box selection\nDid you know that you can do a box selection with Shift+Mouse drag? You can also box-deselect objects with Alt+Mouse drag." msgstr "" #: resources/data/hints.ini: [hint:Zoom on selected objects or on all objects if none selected] msgid "Zoom on selected objects or on all objects if none selected\nDid you know that you can zoom in on selected objects by pressing the Z key? If none are selected, the camera will zoom on all objects in the scene." msgstr "" #: resources/data/hints.ini: [hint:Printable toggle] msgid "Printable toggle\nDid you know that you can disable the G-code generation for the selected model without having to move or delete it? Toggle the Printable property of a model from the Right-click context menu." msgstr "" #: resources/data/hints.ini: [hint:Mirror] msgid "Mirror\nDid you know that you can mirror the selected model to create a reversed version of it? Right-click the model, select Mirror and pick the mirror axis." msgstr "" #: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45 degrees] msgid "PageUp / PageDown quick rotation by 45 degrees\nDid you know that you can quickly rotate selected models by 45 degrees around the Z-axis clockwise or counter-clockwise by pressing Page Up or Page Down respectively?" msgstr "" #: resources/data/hints.ini: [hint:Load config from G-code] msgid "Load config from G-code\nDid you know that you can use File-Import-Import Config to load print, filament and printer profiles from an existing G-code file? Similarly, you can use File-Import-Import SL1 / SL1S archive, which also lets you reconstruct 3D models from the voxel data." msgstr "" #: resources/data/hints.ini: [hint:Ironing] msgid "Ironing\nDid you know that you can smooth top surfaces of prints using Ironing? The nozzle will run a special second infill phase at the same layer to fill in holes and flatten any lifted plastic. Read more in the documentation. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Paint-on supports] msgid "Paint-on supports\nDid you know that you can paint directly on the object and select areas, where supports should be enforced or blocked? Try thePaint-on supportsfeature. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Paint-on seam] msgid "Paint-on seam\nDid you know that you can paint directly on the object and select where to place the start/endpoint of each perimeter loop? Try theSeam paintingfeature. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Insert Pause] msgid "Insert Pause\nDid you know that you can schedule the print to pause at a specific layer? Right-click the layer slider in the Preview and select Add pause print (M601). This can be used to insert magnets, weights or nuts into your prints. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Insert Custom G-code] msgid "Insert Custom G-code\nDid you know that you can insert a custom G-code at a specific layer? Left-click the layer in the Preview, Right-click the plus icon and select Add custom G-code. With this function you can, for example, create a temperature tower. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Configuration snapshots] msgid "Configuration snapshots\nDid you know that you can roll back to a complete backup of all system and user profiles? You can view and move back and forth between snapshots using the Configuration - Configuration snapshots menu." msgstr "" #: resources/data/hints.ini: [hint:Minimum shell thickness] msgid "Minimum shell thickness\nDid you know that instead of the number of top and bottom layers, you can define theMinimum shell thicknessin millimeters? This feature is especially useful when using the variable layer height function." msgstr "" #: resources/data/hints.ini: [hint:Settings in non-modal window] msgid "Settings in non-modal window\nDid you know that you can open the Settings in a new non-modal window? This means you can have settings open on one screen and the G-code Preview on the other. Go to thePreferencesand select Settings in non-modal window." msgstr "" #: resources/data/hints.ini: [hint:Adaptive infills] msgid "Adaptive infills\nDid you know that you can use the Adaptive cubic and Support cubic infills to decrease the print time and lower the filament consumption? Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Lightning infill] msgid "Lightning infill\nDid you know that you can use the Lightning infill to support only the top surfaces, save a lot of the filament, and decrease the print time? Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Fullscreen mode] msgid "Fullscreen mode\nDid you know that you can switch PrusaSlicer to fullscreen mode? Use the F11 hotkey." msgstr "" #: resources/data/hints.ini: [hint:Printables integration] msgid "Printables.com integration\nDid you know that when you are browsing Printables.com, you can send 3D model files to PrusaSlicer with a single click? Learn more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Cut tool] msgid "Cut tool\nDid you know that you can cut a model at any angle and even create aligning pins with the updated Cut tool? Learn more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Measurement tool] msgid "Measurement tool\nDid you know that you can measure the distances between points, edges and planes, the radius of a hole or the angle between edges or planes? Learn more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Text tool] msgid "Text tool\nDid you know that you can add custom text labels to your models or even use the text as a modifier? Learn more in the documentation." msgstr ""