# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2019-01-17 13:39+0100\n"
"PO-Revision-Date: 2019-01-17 15:05+0100\n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Last-Translator: Oleksandra Iushchenko <yusanka@gmail.com>\n"
"Language-Team: \n"
"X-Generator: Poedit 2.0.8\n"

#: src/slic3r/GUI/AboutDialog.cpp:33
msgid "About Slic3r"
msgstr "About Slic3r"

#: src/slic3r/GUI/AboutDialog.cpp:68 src/slic3r/GUI/MainFrame.cpp:51
msgid "Version"
msgstr "Version"

#: src/slic3r/GUI/BedShapeDialog.cpp:43
msgid "Shape"
msgstr "Shape"

#: src/slic3r/GUI/BedShapeDialog.cpp:50
msgid "Rectangular"
msgstr "Rectangular"

#: src/slic3r/GUI/BedShapeDialog.cpp:54
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:207 src/slic3r/GUI/Plater.cpp:125
#: src/slic3r/GUI/Tab.cpp:2122
msgid "Size"
msgstr "Size"

#: src/slic3r/GUI/BedShapeDialog.cpp:55
msgid "Size in X and Y of the rectangular plate."
msgstr "Size in X and Y of the rectangular plate."

#: src/slic3r/GUI/BedShapeDialog.cpp:61
msgid "Origin"
msgstr "Origin"

#: src/slic3r/GUI/BedShapeDialog.cpp:62
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."

#: src/slic3r/GUI/BedShapeDialog.cpp:66
msgid "Circular"
msgstr "Circular"

#: src/slic3r/GUI/BedShapeDialog.cpp:69 src/slic3r/GUI/ConfigWizard.cpp:92
#: src/slic3r/GUI/ConfigWizard.cpp:456 src/slic3r/GUI/ConfigWizard.cpp:470
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:204
#: src/slic3r/GUI/RammingChart.cpp:81 src/slic3r/GUI/WipeTowerDialog.cpp:80
#: src/libslic3r/PrintConfig.cpp:50 src/libslic3r/PrintConfig.cpp:58
#: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:254
#: src/libslic3r/PrintConfig.cpp:263 src/libslic3r/PrintConfig.cpp:315
#: src/libslic3r/PrintConfig.cpp:326 src/libslic3r/PrintConfig.cpp:448
#: src/libslic3r/PrintConfig.cpp:460 src/libslic3r/PrintConfig.cpp:480
#: src/libslic3r/PrintConfig.cpp:679 src/libslic3r/PrintConfig.cpp:1178
#: src/libslic3r/PrintConfig.cpp:1243 src/libslic3r/PrintConfig.cpp:1263
#: src/libslic3r/PrintConfig.cpp:1283 src/libslic3r/PrintConfig.cpp:1365
#: src/libslic3r/PrintConfig.cpp:1376 src/libslic3r/PrintConfig.cpp:1499
#: src/libslic3r/PrintConfig.cpp:1508 src/libslic3r/PrintConfig.cpp:1554
#: src/libslic3r/PrintConfig.cpp:1563 src/libslic3r/PrintConfig.cpp:1574
#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1592
#: src/libslic3r/PrintConfig.cpp:1682 src/libslic3r/PrintConfig.cpp:1918
#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/PrintConfig.cpp:2031
#: src/libslic3r/PrintConfig.cpp:2241 src/libslic3r/PrintConfig.cpp:2249
#: src/libslic3r/PrintConfig.cpp:2257 src/libslic3r/PrintConfig.cpp:2291
#: src/libslic3r/PrintConfig.cpp:2302 src/libslic3r/PrintConfig.cpp:2313
#: src/libslic3r/PrintConfig.cpp:2321 src/libslic3r/PrintConfig.cpp:2328
#: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2497
#: src/libslic3r/PrintConfig.cpp:2506 src/libslic3r/PrintConfig.cpp:2515
#: src/libslic3r/PrintConfig.cpp:2524 src/libslic3r/PrintConfig.cpp:2560
#: src/libslic3r/PrintConfig.cpp:2569 src/libslic3r/PrintConfig.cpp:2587
#: src/libslic3r/PrintConfig.cpp:2596 src/libslic3r/PrintConfig.cpp:2623
#: src/libslic3r/PrintConfig.cpp:2639 src/libslic3r/PrintConfig.cpp:2648
#: src/libslic3r/PrintConfig.cpp:2657 src/libslic3r/PrintConfig.cpp:2666
msgid "mm"
msgstr "mm"

#: src/slic3r/GUI/BedShapeDialog.cpp:70 src/libslic3r/PrintConfig.cpp:676
msgid "Diameter"
msgstr "Diameter"

#: src/slic3r/GUI/BedShapeDialog.cpp:71
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."

#: src/slic3r/GUI/BedShapeDialog.cpp:75 src/slic3r/GUI/GUI_Preview.cpp:265
#: src/libslic3r/GCode/PreviewData.cpp:175
msgid "Custom"
msgstr "Custom"

#: src/slic3r/GUI/BedShapeDialog.cpp:79
msgid "Load shape from STL..."
msgstr "Load shape from STL..."

#: src/slic3r/GUI/BedShapeDialog.cpp:125
msgid "Settings"
msgstr "Settings"

#: src/slic3r/GUI/BedShapeDialog.cpp:298
msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"

#: src/slic3r/GUI/BedShapeDialog.cpp:315 src/slic3r/GUI/GUI_ObjectList.cpp:835
msgid "Error! "
msgstr "Error! "

#: src/slic3r/GUI/BedShapeDialog.cpp:324
msgid "The selected file contains no geometry."
msgstr "The selected file contains no geometry."

#: src/slic3r/GUI/BedShapeDialog.cpp:328
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""
"The selected file contains several disjoint areas. This is not supported."

#: src/slic3r/GUI/BedShapeDialog.hpp:44 src/slic3r/GUI/ConfigWizard.cpp:419
msgid "Bed Shape"
msgstr "Bed Shape"

#: src/slic3r/GUI/BonjourDialog.cpp:54
msgid "Network lookup"
msgstr "Network lookup"

#: src/slic3r/GUI/BonjourDialog.cpp:67
msgid "Address"
msgstr "Address"

#: src/slic3r/GUI/BonjourDialog.cpp:68
msgid "Hostname"
msgstr "Hostname"

#: src/slic3r/GUI/BonjourDialog.cpp:69
msgid "Service name"
msgstr "Service name"

#: src/slic3r/GUI/BonjourDialog.cpp:70
msgid "OctoPrint version"
msgstr "OctoPrint version"

#: src/slic3r/GUI/BonjourDialog.cpp:188
msgid "Searching for devices"
msgstr "Searching for devices"

#: src/slic3r/GUI/BonjourDialog.cpp:195
msgid "Finished"
msgstr "Finished"

#: src/slic3r/GUI/ButtonsDescription.cpp:15
msgid "Buttons And Text Colors Description"
msgstr "Buttons And Text Colors Description"

#: src/slic3r/GUI/ButtonsDescription.cpp:40
msgid "Value is the same as the system value"
msgstr "Value is the same as the system value"

#: src/slic3r/GUI/ButtonsDescription.cpp:57
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""
"Value was changed and is not equal to the system value or the last saved "
"preset"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:16
msgid "Upgrade"
msgstr "Upgrade"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
msgid "Downgrade"
msgstr "Downgrade"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Before roll back"
msgstr "Before roll back"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "User"
msgstr "User"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
msgid "Unknown"
msgstr "Unknown"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:37
msgid "Active: "
msgstr "Active: "

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
msgid "slic3r version"
msgstr "slic3r version"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44 src/slic3r/GUI/Preset.cpp:1156
msgid "print"
msgstr "print"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45
msgid "filaments"
msgstr "filaments"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1160
msgid "printer"
msgstr "printer"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50 src/slic3r/GUI/Tab.cpp:838
msgid "vendor"
msgstr "vendor"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
msgid "version"
msgstr "version"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
msgid "min slic3r version"
msgstr "min slic3r version"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
msgid "max slic3r version"
msgstr "max slic3r version"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
msgid "model"
msgstr "model"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
msgid "variants"
msgstr "variants"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
msgid "Incompatible with this Slic3r"
msgstr "Incompatible with this Slic3r"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
msgid "Activate"
msgstr "Activate"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:97
msgid "Configuration Snapshots"
msgstr "Configuration Snapshots"

#: src/slic3r/GUI/ConfigWizard.cpp:92
msgid "nozzle"
msgstr "nozzle"

#: src/slic3r/GUI/ConfigWizard.cpp:93
msgid "(default)"
msgstr "(default)"

#: src/slic3r/GUI/ConfigWizard.cpp:116
msgid "Select all"
msgstr "Select all"

#: src/slic3r/GUI/ConfigWizard.cpp:117
msgid "Select none"
msgstr "Select none"

#: src/slic3r/GUI/ConfigWizard.cpp:226
#, c-format
msgid "Welcome to the Slic3r %s"
msgstr "Welcome to the Slic3r %s"

#: src/slic3r/GUI/ConfigWizard.cpp:226
msgid "Welcome"
msgstr "Welcome"

#: src/slic3r/GUI/ConfigWizard.cpp:232 src/slic3r/GUI/GUI_App.cpp:606
#, c-format
msgid "Run %s"
msgstr "Run %s"

#: src/slic3r/GUI/ConfigWizard.cpp:234
#, c-format
msgid ""
"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial "
"configuration; just a few settings and you will be ready to print."
msgstr ""
"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial "
"configuration; just a few settings and you will be ready to print."

#: src/slic3r/GUI/ConfigWizard.cpp:238
msgid ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"
msgstr ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"

#: src/slic3r/GUI/ConfigWizard.cpp:263
msgid "Other vendors"
msgstr "Other vendors"

#: src/slic3r/GUI/ConfigWizard.cpp:265
msgid "Custom setup"
msgstr "Custom setup"

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "Automatic updates"
msgstr "Automatic updates"

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "Updates"
msgstr "Updates"

#: src/slic3r/GUI/ConfigWizard.cpp:297 src/slic3r/GUI/Preferences.cpp:59
msgid "Check for application updates"
msgstr "Check for application updates"

#: src/slic3r/GUI/ConfigWizard.cpp:300 src/slic3r/GUI/Preferences.cpp:61
msgid ""
"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new "
"version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new "
"version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."

#: src/slic3r/GUI/ConfigWizard.cpp:304 src/slic3r/GUI/Preferences.cpp:67
msgid "Update built-in Presets automatically"
msgstr "Update built-in Presets automatically"

#: src/slic3r/GUI/ConfigWizard.cpp:307 src/slic3r/GUI/Preferences.cpp:69
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."

#: src/slic3r/GUI/ConfigWizard.cpp:308
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."

#: src/slic3r/GUI/ConfigWizard.cpp:313
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."

#: src/slic3r/GUI/ConfigWizard.cpp:320
msgid "Other Vendors"
msgstr "Other Vendors"

#: src/slic3r/GUI/ConfigWizard.cpp:322
msgid "Pick another vendor supported by Slic3r PE:"
msgstr "Pick another vendor supported by Slic3r PE:"

#: src/slic3r/GUI/ConfigWizard.cpp:381
msgid "Firmware Type"
msgstr "Firmware Type"

#: src/slic3r/GUI/ConfigWizard.cpp:381 src/slic3r/GUI/Tab.cpp:1820
msgid "Firmware"
msgstr "Firmware"

#: src/slic3r/GUI/ConfigWizard.cpp:385
msgid "Choose the type of firmware used by your printer."
msgstr "Choose the type of firmware used by your printer."

#: src/slic3r/GUI/ConfigWizard.cpp:419
msgid "Bed Shape and Size"
msgstr "Bed Shape and Size"

#: src/slic3r/GUI/ConfigWizard.cpp:422
msgid "Set the shape of your printer's bed."
msgstr "Set the shape of your printer's bed."

#: src/slic3r/GUI/ConfigWizard.cpp:436
msgid "Filament and Nozzle Diameters"
msgstr "Filament and Nozzle Diameters"

#: src/slic3r/GUI/ConfigWizard.cpp:436
msgid "Print Diameters"
msgstr "Print Diameters"

#: src/slic3r/GUI/ConfigWizard.cpp:452
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "Enter the diameter of your printer's hot end nozzle."

#: src/slic3r/GUI/ConfigWizard.cpp:455
msgid "Nozzle Diameter:"
msgstr "Nozzle Diameter:"

#: src/slic3r/GUI/ConfigWizard.cpp:465
msgid "Enter the diameter of your filament."
msgstr "Enter the diameter of your filament."

#: src/slic3r/GUI/ConfigWizard.cpp:466
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."

#: src/slic3r/GUI/ConfigWizard.cpp:469
msgid "Filament Diameter:"
msgstr "Filament Diameter:"

#: src/slic3r/GUI/ConfigWizard.cpp:487
msgid "Extruder and Bed Temperatures"
msgstr "Extruder and Bed Temperatures"

#: src/slic3r/GUI/ConfigWizard.cpp:487
msgid "Temperatures"
msgstr "Temperatures"

#: src/slic3r/GUI/ConfigWizard.cpp:503
msgid "Enter the temperature needed for extruding your filament."
msgstr "Enter the temperature needed for extruding your filament."

#: src/slic3r/GUI/ConfigWizard.cpp:504
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."

#: src/slic3r/GUI/ConfigWizard.cpp:507
msgid "Extrusion Temperature:"
msgstr "Extrusion Temperature:"

#: src/slic3r/GUI/ConfigWizard.cpp:508 src/slic3r/GUI/ConfigWizard.cpp:522
msgid "°C"
msgstr "°C"

#: src/slic3r/GUI/ConfigWizard.cpp:517
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."

#: src/slic3r/GUI/ConfigWizard.cpp:518
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."

#: src/slic3r/GUI/ConfigWizard.cpp:521
msgid "Bed Temperature:"
msgstr "Bed Temperature:"

#: src/slic3r/GUI/ConfigWizard.cpp:833
msgid "< &Back"
msgstr "< &Back"

#: src/slic3r/GUI/ConfigWizard.cpp:834
msgid "&Next >"
msgstr "&Next >"

#: src/slic3r/GUI/ConfigWizard.cpp:835
msgid "&Finish"
msgstr "&Finish"

#: src/slic3r/GUI/ConfigWizard.cpp:906
msgid "Configuration Wizard"
msgstr "Configuration Wizard"

#: src/slic3r/GUI/ConfigWizard.cpp:907
msgid "Configuration &Wizard"
msgstr "Configuration &Wizard"

#: src/slic3r/GUI/ConfigWizard.cpp:909
msgid "Configuration Assistant"
msgstr "Configuration Assistant"

#: src/slic3r/GUI/ConfigWizard.cpp:910
msgid "Configuration &Assistant"
msgstr "Configuration &Assistant"

#: src/slic3r/GUI/Field.cpp:109
msgid "default value"
msgstr "default value"

#: src/slic3r/GUI/Field.cpp:112
msgid "parameter name"
msgstr "parameter name"

#: src/slic3r/GUI/Field.cpp:140
#, c-format
msgid "%s doesn't support percentage"
msgstr "%s doesn't support percentage"

#: src/slic3r/GUI/Field.cpp:148 src/slic3r/GUI/Field.cpp:168
msgid ""
"Input value contains incorrect symbol(s).\n"
"Use, please, only digits"
msgstr ""
"Input value contains incorrect symbol(s).\n"
"Use, please, only digits"

#: src/slic3r/GUI/Field.cpp:153
msgid "Input value is out of range"
msgstr "Input value is out of range"

#: src/slic3r/GUI/Field.cpp:176
#, c-format
msgid ""
"Do you mean %d%% instead of %d %s?\n"
"Select YES if you want to change this value to %d%%, \n"
"or NO if you are sure that %d %s is a correct value."
msgstr ""
"Do you mean %d%% instead of %d %s?\n"
"Select YES if you want to change this value to %d%%, \n"
"or NO if you are sure that %d %s is a correct value."

#: src/slic3r/GUI/Field.cpp:179
msgid "Parameter validation"
msgstr "Parameter validation"

#: src/slic3r/GUI/FirmwareDialog.cpp:133
msgid "Flash!"
msgstr "Flash!"

#: src/slic3r/GUI/FirmwareDialog.cpp:134 src/slic3r/GUI/GLGizmo.cpp:2270
msgid "Cancel"
msgstr "Cancel"

#: src/slic3r/GUI/FirmwareDialog.cpp:135
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "Flashing in progress. Please do not disconnect the printer!"

#: src/slic3r/GUI/FirmwareDialog.cpp:245
msgid "Flashing succeeded!"
msgstr "Flashing succeeded!"

#: src/slic3r/GUI/FirmwareDialog.cpp:246
msgid "Flashing failed. Please see the avrdude log below."
msgstr "Flashing failed. Please see the avrdude log below."

#: src/slic3r/GUI/FirmwareDialog.cpp:247
msgid "Flashing cancelled."
msgstr "Flashing cancelled."

#: src/slic3r/GUI/FirmwareDialog.cpp:279
#, c-format
msgid "Flashing failed: %s"
msgstr "Flashing failed: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:293
#, c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."

#: src/slic3r/GUI/FirmwareDialog.cpp:380 src/slic3r/GUI/FirmwareDialog.cpp:414
msgid ""
"Multiple Original Prusa i3 MMU 2.0 devices found. Please only connect one at "
"a time for flashing."
msgstr ""
"Multiple Original Prusa i3 MMU 2.0 devices found. Please only connect one at "
"a time for flashing."

#: src/slic3r/GUI/FirmwareDialog.cpp:508
msgid "The device could not have been found"
msgstr "The device could not have been found"

#: src/slic3r/GUI/FirmwareDialog.cpp:581
#, c-format
msgid "Error accessing port at %s: %s"
msgstr "Error accessing port at %s: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:690
msgid "Firmware flasher"
msgstr "Firmware flasher"

#: src/slic3r/GUI/FirmwareDialog.cpp:712
msgid "Firmware image:"
msgstr "Firmware image:"

#: src/slic3r/GUI/FirmwareDialog.cpp:716
msgid "Serial port:"
msgstr "Serial port:"

#: src/slic3r/GUI/FirmwareDialog.cpp:718
msgid "Autodetected"
msgstr "Autodetected"

#: src/slic3r/GUI/FirmwareDialog.cpp:719
msgid "Rescan"
msgstr "Rescan"

#: src/slic3r/GUI/FirmwareDialog.cpp:726
msgid "Progress:"
msgstr "Progress:"

#: src/slic3r/GUI/FirmwareDialog.cpp:729
msgid "Status:"
msgstr "Status:"

#: src/slic3r/GUI/FirmwareDialog.cpp:730
msgid "Ready"
msgstr "Ready"

#: src/slic3r/GUI/FirmwareDialog.cpp:750
msgid "Advanced: avrdude output log"
msgstr "Advanced: avrdude output log"

#: src/slic3r/GUI/FirmwareDialog.cpp:809
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"

#: src/slic3r/GUI/FirmwareDialog.cpp:810
msgid "Confirmation"
msgstr "Confirmation"

#: src/slic3r/GUI/FirmwareDialog.cpp:813
msgid "Cancelling..."
msgstr "Cancelling..."

#: src/slic3r/GUI/GLCanvas3D.cpp:4640
msgid "Detected object outside print volume"
msgstr "Detected object outside print volume"

#: src/slic3r/GUI/GLCanvas3D.cpp:7962
msgid "Detected toolpath outside print volume"
msgstr "Detected toolpath outside print volume"

#: src/slic3r/GUI/GLGizmo.cpp:751 src/slic3r/GUI/GUI_ObjectManipulation.cpp:300
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:322
#: src/libslic3r/PrintConfig.cpp:3087
msgid "Rotate"
msgstr "Rotate"

#: src/slic3r/GUI/GLGizmo.cpp:785
msgid "Rotation (deg)"
msgstr "Rotation (deg)"

#: src/slic3r/GUI/GLGizmo.cpp:841 src/slic3r/GUI/GUI_ObjectManipulation.cpp:206
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:301
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:323
#: src/libslic3r/PrintConfig.cpp:3111
msgid "Scale"
msgstr "Scale"

#: src/slic3r/GUI/GLGizmo.cpp:1072
msgid "Scale (%)"
msgstr "Scale (%)"

#: src/slic3r/GUI/GLGizmo.cpp:1200
msgid "Move"
msgstr "Move"

#: src/slic3r/GUI/GLGizmo.cpp:1326
msgid "Position (mm)"
msgstr "Position (mm)"

#: src/slic3r/GUI/GLGizmo.cpp:1326
msgid "Displacement (mm)"
msgstr "Displacement (mm)"

#: src/slic3r/GUI/GLGizmo.cpp:1430
msgid "Place on face"
msgstr "Place on face"

#: src/slic3r/GUI/GLGizmo.cpp:2207
msgid "Left mouse click - add point"
msgstr "Left mouse click - add point"

#: src/slic3r/GUI/GLGizmo.cpp:2208
msgid "Right mouse click - remove point"
msgstr "Right mouse click - remove point"

#: src/slic3r/GUI/GLGizmo.cpp:2211
msgid "Generate points automatically"
msgstr "Generate points automatically"

#: src/slic3r/GUI/GLGizmo.cpp:2212
msgid "Remove all points"
msgstr "Remove all points"

#: src/slic3r/GUI/GLGizmo.cpp:2245
msgid "SLA Support Points"
msgstr "SLA Support Points"

#: src/slic3r/GUI/GLGizmo.cpp:2268 src/slic3r/GUI/GLGizmo.cpp:2468
msgid "Rotate lower part upwards"
msgstr "Rotate lower part upwards"

#: src/slic3r/GUI/GLGizmo.cpp:2269 src/slic3r/GUI/GLGizmo.cpp:2470
msgid "Perform cut"
msgstr "Perform cut"

#: src/slic3r/GUI/GLGizmo.cpp:2276
msgid "Cut object:"
msgstr "Cut object:"

#: src/slic3r/GUI/GLGizmo.cpp:2356 src/slic3r/GUI/GLGizmo.cpp:2461
#: src/libslic3r/PrintConfig.cpp:3016
msgid "Cut"
msgstr "Cut"

#: src/slic3r/GUI/GLGizmo.cpp:2466
msgid "Keep upper part"
msgstr "Keep upper part"

#: src/slic3r/GUI/GLGizmo.cpp:2467
msgid "Keep lower part"
msgstr "Keep lower part"

#: src/slic3r/GUI/GUI.cpp:242
msgid "Notice"
msgstr "Notice"

#: src/slic3r/GUI/GUI.cpp:248
msgid "Attempt to free unreferenced scalar"
msgstr "Attempt to free unreferenced scalar"

#: src/slic3r/GUI/GUI.cpp:250 src/slic3r/GUI/WipeTowerDialog.cpp:40
#: src/slic3r/GUI/WipeTowerDialog.cpp:322
msgid "Warning"
msgstr "Warning"

#: src/slic3r/GUI/GUI_App.cpp:377
msgid "Choose one file (3MF):"
msgstr "Choose one file (3MF):"

#: src/slic3r/GUI/GUI_App.cpp:389
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"

#: src/slic3r/GUI/GUI_App.cpp:451
msgid "Array of language names and identifiers should have the same size."
msgstr "Array of language names and identifiers should have the same size."

#: src/slic3r/GUI/GUI_App.cpp:461
msgid "Select the language"
msgstr "Select the language"

#: src/slic3r/GUI/GUI_App.cpp:461
msgid "Language"
msgstr "Language"

#: src/slic3r/GUI/GUI_App.cpp:529 src/libslic3r/PrintConfig.cpp:270
msgid "Default"
msgstr "Default"

#: src/slic3r/GUI/GUI_App.cpp:609
msgid "&Configuration Snapshots"
msgstr "&Configuration Snapshots"

#: src/slic3r/GUI/GUI_App.cpp:609
msgid "Inspect / activate configuration snapshots"
msgstr "Inspect / activate configuration snapshots"

#: src/slic3r/GUI/GUI_App.cpp:610
msgid "Take Configuration &Snapshot"
msgstr "Take Configuration &Snapshot"

#: src/slic3r/GUI/GUI_App.cpp:610
msgid "Capture a configuration snapshot"
msgstr "Capture a configuration snapshot"

#: src/slic3r/GUI/GUI_App.cpp:613
msgid "&Preferences"
msgstr "&Preferences"

#: src/slic3r/GUI/GUI_App.cpp:613
msgid "Application preferences"
msgstr "Application preferences"

#: src/slic3r/GUI/GUI_App.cpp:616
msgid "Simple"
msgstr "Simple"

#: src/slic3r/GUI/GUI_App.cpp:616
msgid "Simple View Mode"
msgstr "Simple View Mode"

#: src/slic3r/GUI/GUI_App.cpp:617 src/slic3r/GUI/GUI_ObjectList.cpp:39
#: src/slic3r/GUI/Tab.cpp:948 src/slic3r/GUI/Tab.cpp:962
#: src/slic3r/GUI/Tab.cpp:1058 src/slic3r/GUI/Tab.cpp:1061
#: src/slic3r/GUI/Tab.cpp:1425 src/slic3r/GUI/Tab.cpp:1840
#: src/libslic3r/PrintConfig.cpp:156 src/libslic3r/PrintConfig.cpp:323
#: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:2298
msgid "Advanced"
msgstr "Advanced"

#: src/slic3r/GUI/GUI_App.cpp:617
msgid "Advanced View Mode"
msgstr "Advanced View Mode"

#: src/slic3r/GUI/GUI_App.cpp:618
msgid "Expert"
msgstr "Expert"

#: src/slic3r/GUI/GUI_App.cpp:618
msgid "Expert View Mode"
msgstr "Expert View Mode"

#: src/slic3r/GUI/GUI_App.cpp:620
msgid "Mode"
msgstr "Mode"

#: src/slic3r/GUI/GUI_App.cpp:620
msgid "Slic3r View Mode"
msgstr "Slic3r View Mode"

#: src/slic3r/GUI/GUI_App.cpp:622
msgid "Change Application &Language"
msgstr "Change Application &Language"

#: src/slic3r/GUI/GUI_App.cpp:624
msgid "Flash printer &firmware"
msgstr "Flash printer &firmware"

#: src/slic3r/GUI/GUI_App.cpp:624
msgid "Upload a firmware image into an Arduino based printer"
msgstr "Upload a firmware image into an Arduino based printer"

#: src/slic3r/GUI/GUI_App.cpp:636
msgid "Taking configuration snapshot"
msgstr "Taking configuration snapshot"

#: src/slic3r/GUI/GUI_App.cpp:636
msgid "Snapshot name"
msgstr "Snapshot name"

#: src/slic3r/GUI/GUI_App.cpp:674
msgid "Application will be restarted"
msgstr "Application will be restarted"

#: src/slic3r/GUI/GUI_App.cpp:674 src/slic3r/GUI/Tab.cpp:2606
msgid "Attention!"
msgstr "Attention!"

#: src/slic3r/GUI/GUI_App.cpp:691
msgid "&Configuration"
msgstr "&Configuration"

#: src/slic3r/GUI/GUI_App.cpp:711
msgid "You have unsaved changes "
msgstr "You have unsaved changes "

#: src/slic3r/GUI/GUI_App.cpp:711
msgid ". Discard changes and continue anyway?"
msgstr ". Discard changes and continue anyway?"

#: src/slic3r/GUI/GUI_App.cpp:712
msgid "Unsaved Presets"
msgstr "Unsaved Presets"

#: src/slic3r/GUI/GUI_ObjectList.cpp:31 src/libslic3r/PrintConfig.cpp:47
#: src/libslic3r/PrintConfig.cpp:115 src/libslic3r/PrintConfig.cpp:357
#: src/libslic3r/PrintConfig.cpp:410 src/libslic3r/PrintConfig.cpp:419
#: src/libslic3r/PrintConfig.cpp:849 src/libslic3r/PrintConfig.cpp:1037
#: src/libslic3r/PrintConfig.cpp:1354 src/libslic3r/PrintConfig.cpp:1426
#: src/libslic3r/PrintConfig.cpp:1618 src/libslic3r/PrintConfig.cpp:2091
#: src/libslic3r/PrintConfig.cpp:2150
msgid "Layers and Perimeters"
msgstr "Layers and Perimeters"

#: src/slic3r/GUI/GUI_ObjectList.cpp:32 src/slic3r/GUI/Tab.cpp:952
#: src/slic3r/GUI/Tab.cpp:953 src/slic3r/GUI/Tab.cpp:1274
#: src/libslic3r/PrintConfig.cpp:134 src/libslic3r/PrintConfig.cpp:366
#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:745
#: src/libslic3r/PrintConfig.cpp:783 src/libslic3r/PrintConfig.cpp:938
#: src/libslic3r/PrintConfig.cpp:949 src/libslic3r/PrintConfig.cpp:969
#: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:1010
#: src/libslic3r/PrintConfig.cpp:1733 src/libslic3r/PrintConfig.cpp:1752
msgid "Infill"
msgstr "Infill"

#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_Preview.cpp:262
#: src/slic3r/GUI/Tab.cpp:980 src/slic3r/GUI/Tab.cpp:981
#: src/libslic3r/PrintConfig.cpp:305 src/libslic3r/PrintConfig.cpp:1484
#: src/libslic3r/PrintConfig.cpp:1865 src/libslic3r/PrintConfig.cpp:1872
#: src/libslic3r/PrintConfig.cpp:1881 src/libslic3r/PrintConfig.cpp:1894
#: src/libslic3r/PrintConfig.cpp:1905 src/libslic3r/PrintConfig.cpp:1914
#: src/libslic3r/PrintConfig.cpp:1930 src/libslic3r/PrintConfig.cpp:1953
#: src/libslic3r/PrintConfig.cpp:1965 src/libslic3r/PrintConfig.cpp:1983
#: src/libslic3r/PrintConfig.cpp:1993 src/libslic3r/PrintConfig.cpp:2003
#: src/libslic3r/PrintConfig.cpp:2014 src/libslic3r/PrintConfig.cpp:2029
#: src/libslic3r/PrintConfig.cpp:2038 src/libslic3r/PrintConfig.cpp:2039
#: src/libslic3r/PrintConfig.cpp:2048 src/libslic3r/PrintConfig.cpp:2057
#: src/libslic3r/PrintConfig.cpp:2072 src/libslic3r/GCode/PreviewData.cpp:172
msgid "Support material"
msgstr "Support material"

#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_Preview.cpp:241
#: src/slic3r/GUI/Tab.cpp:1005 src/libslic3r/PrintConfig.cpp:169
#: src/libslic3r/PrintConfig.cpp:398 src/libslic3r/PrintConfig.cpp:881
#: src/libslic3r/PrintConfig.cpp:1011 src/libslic3r/PrintConfig.cpp:1416
#: src/libslic3r/PrintConfig.cpp:1668 src/libslic3r/PrintConfig.cpp:1721
#: src/libslic3r/PrintConfig.cpp:1776 src/libslic3r/PrintConfig.cpp:2136
msgid "Speed"
msgstr "Speed"

#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/Tab.cpp:1038
#: src/slic3r/GUI/Tab.cpp:1744 src/libslic3r/PrintConfig.cpp:430
#: src/libslic3r/PrintConfig.cpp:961 src/libslic3r/PrintConfig.cpp:1393
#: src/libslic3r/PrintConfig.cpp:1743 src/libslic3r/PrintConfig.cpp:1944
#: src/libslic3r/PrintConfig.cpp:1973 src/libslic3r/PrintConfig.cpp:2271
#: src/libslic3r/PrintConfig.cpp:2280
msgid "Extruders"
msgstr "Extruders"

#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/libslic3r/PrintConfig.cpp:387
#: src/libslic3r/PrintConfig.cpp:504 src/libslic3r/PrintConfig.cpp:836
#: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:1403
#: src/libslic3r/PrintConfig.cpp:1765 src/libslic3r/PrintConfig.cpp:1954
#: src/libslic3r/PrintConfig.cpp:2124
msgid "Extrusion Width"
msgstr "Extrusion Width"

#: src/slic3r/GUI/GUI_ObjectList.cpp:41 src/slic3r/GUI/Tab.cpp:3179
#: src/slic3r/GUI/Tab.cpp:3180 src/libslic3r/PrintConfig.cpp:2488
#: src/libslic3r/PrintConfig.cpp:2495 src/libslic3r/PrintConfig.cpp:2504
#: src/libslic3r/PrintConfig.cpp:2513 src/libslic3r/PrintConfig.cpp:2522
#: src/libslic3r/PrintConfig.cpp:2547 src/libslic3r/PrintConfig.cpp:2558
#: src/libslic3r/PrintConfig.cpp:2567 src/libslic3r/PrintConfig.cpp:2576
#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2594
#: src/libslic3r/PrintConfig.cpp:2603 src/libslic3r/PrintConfig.cpp:2612
#: src/libslic3r/PrintConfig.cpp:2621
msgid "Supports"
msgstr "Supports"

#: src/slic3r/GUI/GUI_ObjectList.cpp:42 src/slic3r/GUI/Tab.cpp:3205
#: src/slic3r/GUI/Tab.cpp:3206 src/libslic3r/PrintConfig.cpp:2630
#: src/libslic3r/PrintConfig.cpp:2637 src/libslic3r/PrintConfig.cpp:2646
#: src/libslic3r/PrintConfig.cpp:2655 src/libslic3r/PrintConfig.cpp:2664
msgid "Pad"
msgstr "Pad"

#: src/slic3r/GUI/GUI_ObjectList.cpp:115
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:129
msgid "Name"
msgstr "Name"

#: src/slic3r/GUI/GUI_ObjectList.cpp:134
msgid "Right button click the icon to change the object settings"
msgstr "Right button click the icon to change the object settings"

#: src/slic3r/GUI/GUI_ObjectList.cpp:142
#, c-format
msgid "Auto-repaired (%d errors):\n"
msgstr "Auto-repaired (%d errors):\n"

#: src/slic3r/GUI/GUI_ObjectList.cpp:145
msgid "degenerate facets"
msgstr "degenerate facets"

#: src/slic3r/GUI/GUI_ObjectList.cpp:146
msgid "edges fixed"
msgstr "edges fixed"

#: src/slic3r/GUI/GUI_ObjectList.cpp:147
msgid "facets removed"
msgstr "facets removed"

#: src/slic3r/GUI/GUI_ObjectList.cpp:148
msgid "facets added"
msgstr "facets added"

#: src/slic3r/GUI/GUI_ObjectList.cpp:149
msgid "facets reversed"
msgstr "facets reversed"

#: src/slic3r/GUI/GUI_ObjectList.cpp:150
msgid "backwards edges"
msgstr "backwards edges"

#: src/slic3r/GUI/GUI_ObjectList.cpp:164
msgid "Right button click the icon to fix STL through Netfabb"
msgstr "Right button click the icon to fix STL through Netfabb"

#: src/slic3r/GUI/GUI_ObjectList.cpp:196 src/slic3r/GUI/Tab.cpp:1389
#: src/libslic3r/PrintConfig.cpp:429
msgid "Extruder"
msgstr "Extruder"

#: src/slic3r/GUI/GUI_ObjectList.cpp:615
msgid "Select showing settings"
msgstr "Select showing settings"

#: src/slic3r/GUI/GUI_ObjectList.cpp:655
msgid "Load"
msgstr "Load"

#: src/slic3r/GUI/GUI_ObjectList.cpp:659 src/slic3r/GUI/GUI_ObjectList.cpp:688
#: src/slic3r/GUI/GUI_ObjectList.cpp:691
msgid "Box"
msgstr "Box"

#: src/slic3r/GUI/GUI_ObjectList.cpp:659
msgid "Cylinder"
msgstr "Cylinder"

#: src/slic3r/GUI/GUI_ObjectList.cpp:659
msgid "Sphere"
msgstr "Sphere"

#: src/slic3r/GUI/GUI_ObjectList.cpp:659
msgid "Slab"
msgstr "Slab"

#: src/slic3r/GUI/GUI_ObjectList.cpp:671 src/slic3r/GUI/GUI_ObjectList.cpp:685
msgid "Add part"
msgstr "Add part"

#: src/slic3r/GUI/GUI_ObjectList.cpp:672
msgid "Add modifier"
msgstr "Add modifier"

#: src/slic3r/GUI/GUI_ObjectList.cpp:673 src/slic3r/GUI/GUI_ObjectList.cpp:687
msgid "Add support enforcer"
msgstr "Add support enforcer"

#: src/slic3r/GUI/GUI_ObjectList.cpp:674 src/slic3r/GUI/GUI_ObjectList.cpp:690
msgid "Add support blocker"
msgstr "Add support blocker"

#: src/slic3r/GUI/GUI_ObjectList.cpp:711
msgid "Split to parts"
msgstr "Split to parts"

#: src/slic3r/GUI/GUI_ObjectList.cpp:725
msgid "Add settings"
msgstr "Add settings"

#: src/slic3r/GUI/GUI_ObjectList.cpp:739
msgid "Change type"
msgstr "Change type"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1009
msgid "You can't delete the last solid part from object."
msgstr "You can't delete the last solid part from object."

#: src/slic3r/GUI/GUI_ObjectList.cpp:1017
msgid "You can't delete the last intance from object."
msgstr "You can't delete the last intance from object."

#: src/slic3r/GUI/GUI_ObjectList.cpp:1044 src/slic3r/GUI/Plater.cpp:1825
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""
"The selected object couldn't be split because it contains only one part."

#: src/slic3r/GUI/GUI_ObjectList.cpp:1138
msgid "Group manipulation"
msgstr "Group manipulation"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1149
msgid "Object manipulation"
msgstr "Object manipulation"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1159
msgid "Object Settings to modify"
msgstr "Object Settings to modify"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1163
msgid "Part Settings to modify"
msgstr "Part Settings to modify"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1173
msgid "Part manipulation"
msgstr "Part manipulation"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1180
msgid "Instance manipulation"
msgstr "Instance manipulation"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1655
msgid "You can't change a type of the last solid part of the object."
msgstr "You can't change a type of the last solid part of the object."

#: src/slic3r/GUI/GUI_ObjectList.cpp:1662
msgid "Select type of part"
msgstr "Select type of part"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1744 src/slic3r/GUI/Tab.cpp:3070
#: src/slic3r/GUI/Tab.cpp:3074
msgid "The supplied name is not valid;"
msgstr "The supplied name is not valid;"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1745 src/slic3r/GUI/Tab.cpp:3071
msgid "the following characters are not allowed:"
msgstr "the following characters are not allowed:"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:21
msgid "Object Manipulation"
msgstr "Object Manipulation"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:132
msgid "Object name"
msgstr "Object name"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:204
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:252
msgid "Position"
msgstr "Position"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:205
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:253
msgid "Rotation"
msgstr "Rotation"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:254
msgid "Scale factors"
msgstr "Scale factors"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:321
msgid "Translate"
msgstr "Translate"

#: src/slic3r/GUI/GUI_Preview.cpp:235
msgid "View"
msgstr "View"

#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/GUI_Preview.cpp:550
#: src/libslic3r/GCode/PreviewData.cpp:394
msgid "Feature type"
msgstr "Feature type"

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/PrintConfig.cpp:443
msgid "Height"
msgstr "Height"

#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/PrintConfig.cpp:2255
msgid "Width"
msgstr "Width"

#: src/slic3r/GUI/GUI_Preview.cpp:242
msgid "Volumetric flow rate"
msgstr "Volumetric flow rate"

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/slic3r/GUI/GUI_Preview.cpp:347
#: src/slic3r/GUI/GUI_Preview.cpp:496 src/slic3r/GUI/GUI_Preview.cpp:718
#: src/libslic3r/GCode/PreviewData.cpp:404
msgid "Tool"
msgstr "Tool"

#: src/slic3r/GUI/GUI_Preview.cpp:244 src/slic3r/GUI/GUI_Preview.cpp:550
#: src/libslic3r/GCode/PreviewData.cpp:406
msgid "Color Print"
msgstr "Color Print"

#: src/slic3r/GUI/GUI_Preview.cpp:247
msgid "Show"
msgstr "Show"

#: src/slic3r/GUI/GUI_Preview.cpp:250 src/slic3r/GUI/GUI_Preview.cpp:251
msgid "Feature types"
msgstr "Feature types"

#: src/slic3r/GUI/GUI_Preview.cpp:253 src/libslic3r/GCode/PreviewData.cpp:163
msgid "Perimeter"
msgstr "Perimeter"

#: src/slic3r/GUI/GUI_Preview.cpp:254 src/libslic3r/GCode/PreviewData.cpp:164
msgid "External perimeter"
msgstr "External perimeter"

#: src/slic3r/GUI/GUI_Preview.cpp:255 src/libslic3r/GCode/PreviewData.cpp:165
msgid "Overhang perimeter"
msgstr "Overhang perimeter"

#: src/slic3r/GUI/GUI_Preview.cpp:256 src/libslic3r/GCode/PreviewData.cpp:166
msgid "Internal infill"
msgstr "Internal infill"

#: src/slic3r/GUI/GUI_Preview.cpp:257 src/libslic3r/PrintConfig.cpp:1764
#: src/libslic3r/PrintConfig.cpp:1775 src/libslic3r/GCode/PreviewData.cpp:167
msgid "Solid infill"
msgstr "Solid infill"

#: src/slic3r/GUI/GUI_Preview.cpp:258 src/libslic3r/PrintConfig.cpp:2123
#: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/GCode/PreviewData.cpp:168
msgid "Top solid infill"
msgstr "Top solid infill"

#: src/slic3r/GUI/GUI_Preview.cpp:259 src/libslic3r/GCode/PreviewData.cpp:169
msgid "Bridge infill"
msgstr "Bridge infill"

#: src/slic3r/GUI/GUI_Preview.cpp:260 src/libslic3r/PrintConfig.cpp:880
#: src/libslic3r/GCode/PreviewData.cpp:170
msgid "Gap fill"
msgstr "Gap fill"

#: src/slic3r/GUI/GUI_Preview.cpp:261 src/slic3r/GUI/Tab.cpp:971
#: src/libslic3r/GCode/PreviewData.cpp:171
msgid "Skirt"
msgstr "Skirt"

#: src/slic3r/GUI/GUI_Preview.cpp:263 src/libslic3r/PrintConfig.cpp:2002
#: src/libslic3r/GCode/PreviewData.cpp:173
msgid "Support material interface"
msgstr "Support material interface"

#: src/slic3r/GUI/GUI_Preview.cpp:264 src/slic3r/GUI/Tab.cpp:1049
#: src/libslic3r/GCode/PreviewData.cpp:174
msgid "Wipe tower"
msgstr "Wipe tower"

#: src/slic3r/GUI/GUI_Preview.cpp:269 src/libslic3r/PrintConfig.cpp:2158
msgid "Travel"
msgstr "Travel"

#: src/slic3r/GUI/GUI_Preview.cpp:270
msgid "Retractions"
msgstr "Retractions"

#: src/slic3r/GUI/GUI_Preview.cpp:271
msgid "Unretractions"
msgstr "Unretractions"

#: src/slic3r/GUI/GUI_Preview.cpp:272
msgid "Shells"
msgstr "Shells"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:12
msgid "Slic3r Prusa Edition - Keyboard Shortcuts"
msgstr "Slic3r Prusa Edition - Keyboard Shortcuts"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:47
#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Main Shortcuts"
msgstr "Main Shortcuts"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:101
msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
msgstr "Open project STL/OBJ/AMF/3MF with config, delete bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
msgstr "Import STL/OBJ/AMF/3MF without config, keep bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
msgid "Load Config from .ini/amf/3mf/gcode"
msgstr "Load Config from .ini/amf/3mf/gcode"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:104 src/slic3r/GUI/Plater.cpp:605
msgid "Export G-code"
msgstr "Export G-code"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
msgid "Save project (3MF)"
msgstr "Save project (3MF)"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
msgid "Load Config from .ini/amf/3mf/gcode and merge"
msgstr "Load Config from .ini/amf/3mf/gcode and merge"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
msgid "(Re)slice"
msgstr "(Re)slice"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Quick slice"
msgstr "Quick slice"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109 src/slic3r/GUI/MainFrame.cpp:289
msgid "Repeat last quick slice"
msgstr "Repeat last quick slice"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
msgid "Select Plater Tab"
msgstr "Select Plater Tab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Quick slice and Save as"
msgstr "Quick slice and Save as"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Select Print Settings Tab"
msgstr "Select Print Settings Tab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "Select Filament Settings Tab"
msgstr "Select Filament Settings Tab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
msgid "Select Printer Settings Tab"
msgstr "Select Printer Settings Tab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
msgid "Switch to 3D"
msgstr "Switch to 3D"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
msgid "Switch to Preview"
msgstr "Switch to Preview"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117 src/slic3r/GUI/Preferences.cpp:10
msgid "Preferences"
msgstr "Preferences"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
#: src/slic3r/GUI/PrintHostDialogs.cpp:89
msgid "Print host upload queue"
msgstr "Print host upload queue"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Camera view "
msgstr "Camera view "

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Add Instance to selected object "
msgstr "Add Instance to selected object "

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Remove Instance from selected object"
msgstr "Remove Instance from selected object"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Show keyboard shortcuts list"
msgstr "Show keyboard shortcuts list"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
msgid "Switch between 3D and Preview"
msgstr "Switch between 3D and Preview"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
msgid "Select multiple object/Move multiple object"
msgstr "Select multiple object/Move multiple object"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
msgid "Arrange"
msgstr "Arrange"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
msgid "Select All objects"
msgstr "Select All objects"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
msgid "Delete selected"
msgstr "Delete selected"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Delete All"
msgstr "Delete All"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid "Gizmo move"
msgstr "Gizmo move"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Gizmo scale"
msgstr "Gizmo scale"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Gizmo rotate"
msgstr "Gizmo rotate"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Gizmo cut"
msgstr "Gizmo cut"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Gizmo Place face on bed"
msgstr "Gizmo Place face on bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Gizmo SLA support points"
msgstr "Gizmo SLA support points"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Zoom to Bed"
msgstr "Zoom to Bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Zoom to all objects in scene, if none selected"
msgstr "Zoom to all objects in scene, if none selected"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Zoom to selected object"
msgstr "Zoom to selected object"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Zoom in"
msgstr "Zoom in"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Zoom out"
msgstr "Zoom out"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Unselect gizmo, keep object selection"
msgstr "Unselect gizmo, keep object selection"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Plater Shortcuts"
msgstr "Plater Shortcuts"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Arrow Up"
msgstr "Arrow Up"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Upper Layer"
msgstr "Upper Layer"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Arrow Down"
msgstr "Arrow Down"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Lower Layer"
msgstr "Lower Layer"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Preview Shortcuts"
msgstr "Preview Shortcuts"

#: src/slic3r/GUI/MainFrame.cpp:53
msgid ""
" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
msgstr ""
" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"

#: src/slic3r/GUI/MainFrame.cpp:130
msgid "Plater"
msgstr "Plater"

#: src/slic3r/GUI/MainFrame.cpp:236
msgid "&Open"
msgstr "&Open"

#: src/slic3r/GUI/MainFrame.cpp:236
msgid "Open a project file"
msgstr "Open a project file"

#: src/slic3r/GUI/MainFrame.cpp:238
msgid "&Save"
msgstr "&Save"

#: src/slic3r/GUI/MainFrame.cpp:238
msgid "Save current project file"
msgstr "Save current project file"

#: src/slic3r/GUI/MainFrame.cpp:240
msgid "Save &as"
msgstr "Save &as"

#: src/slic3r/GUI/MainFrame.cpp:240
msgid "Save current project file as"
msgstr "Save current project file as"

#: src/slic3r/GUI/MainFrame.cpp:246
msgid "Import STL/OBJ/AM&F/3MF"
msgstr "Import STL/OBJ/AM&F/3MF"

#: src/slic3r/GUI/MainFrame.cpp:246
msgid "Load a model"
msgstr "Load a model"

#: src/slic3r/GUI/MainFrame.cpp:249
msgid "Import &Config"
msgstr "Import &Config"

#: src/slic3r/GUI/MainFrame.cpp:249
msgid "Load exported configuration file"
msgstr "Load exported configuration file"

#: src/slic3r/GUI/MainFrame.cpp:251
msgid "Import Config from &project"
msgstr "Import Config from &project"

#: src/slic3r/GUI/MainFrame.cpp:251
msgid "Load configuration from project file"
msgstr "Load configuration from project file"

#: src/slic3r/GUI/MainFrame.cpp:254
msgid "Import Config &Bundle"
msgstr "Import Config &Bundle"

#: src/slic3r/GUI/MainFrame.cpp:254
msgid "Load presets from a bundle"
msgstr "Load presets from a bundle"

#: src/slic3r/GUI/MainFrame.cpp:256
msgid "&Import"
msgstr "&Import"

#: src/slic3r/GUI/MainFrame.cpp:259
msgid "Export &G-code"
msgstr "Export &G-code"

#: src/slic3r/GUI/MainFrame.cpp:259
msgid "Export current plate as G-code"
msgstr "Export current plate as G-code"

#: src/slic3r/GUI/MainFrame.cpp:262
msgid "Export plate as &STL"
msgstr "Export plate as &STL"

#: src/slic3r/GUI/MainFrame.cpp:262
msgid "Export current plate as STL"
msgstr "Export current plate as STL"

#: src/slic3r/GUI/MainFrame.cpp:264
msgid "Export plate as &AMF"
msgstr "Export plate as &AMF"

#: src/slic3r/GUI/MainFrame.cpp:264
msgid "Export current plate as AMF"
msgstr "Export current plate as AMF"

#: src/slic3r/GUI/MainFrame.cpp:267
msgid "Export &Config"
msgstr "Export &Config"

#: src/slic3r/GUI/MainFrame.cpp:267
msgid "Export current configuration to file"
msgstr "Export current configuration to file"

#: src/slic3r/GUI/MainFrame.cpp:269
msgid "Export Config &Bundle"
msgstr "Export Config &Bundle"

#: src/slic3r/GUI/MainFrame.cpp:269
msgid "Export all presets to file"
msgstr "Export all presets to file"

#: src/slic3r/GUI/MainFrame.cpp:271
msgid "&Export"
msgstr "&Export"

#: src/slic3r/GUI/MainFrame.cpp:277
msgid "Quick Slice"
msgstr "Quick Slice"

#: src/slic3r/GUI/MainFrame.cpp:277
msgid "Slice a file into a G-code"
msgstr "Slice a file into a G-code"

#: src/slic3r/GUI/MainFrame.cpp:283
msgid "Quick Slice and Save As"
msgstr "Quick Slice and Save As"

#: src/slic3r/GUI/MainFrame.cpp:283
msgid "Slice a file into a G-code, save as"
msgstr "Slice a file into a G-code, save as"

#: src/slic3r/GUI/MainFrame.cpp:289
msgid "Repeat Last Quick Slice"
msgstr "Repeat Last Quick Slice"

#: src/slic3r/GUI/MainFrame.cpp:297
msgid "(Re)Slice &Now"
msgstr "(Re)Slice &Now"

#: src/slic3r/GUI/MainFrame.cpp:297
msgid "Start new slicing process"
msgstr "Start new slicing process"

#: src/slic3r/GUI/MainFrame.cpp:300
msgid "&Repair STL file"
msgstr "&Repair STL file"

#: src/slic3r/GUI/MainFrame.cpp:300
msgid "Automatically repair an STL file"
msgstr "Automatically repair an STL file"

#: src/slic3r/GUI/MainFrame.cpp:303
msgid "&Quit"
msgstr "&Quit"

#: src/slic3r/GUI/MainFrame.cpp:303
msgid "Quit Slic3r"
msgstr "Quit Slic3r"

#: src/slic3r/GUI/MainFrame.cpp:321
msgid "&Select all"
msgstr "&Select all"

#: src/slic3r/GUI/MainFrame.cpp:321
msgid "Selects all objects"
msgstr "Selects all objects"

#: src/slic3r/GUI/MainFrame.cpp:324
msgid "&Delete selected"
msgstr "&Delete selected"

#: src/slic3r/GUI/MainFrame.cpp:324
msgid "Deletes the current selection"
msgstr "Deletes the current selection"

#: src/slic3r/GUI/MainFrame.cpp:326
msgid "Delete &all"
msgstr "Delete &all"

#: src/slic3r/GUI/MainFrame.cpp:326
msgid "Deletes all objects"
msgstr "Deletes all objects"

#: src/slic3r/GUI/MainFrame.cpp:339
msgid "&Plater Tab"
msgstr "&Plater Tab"

#: src/slic3r/GUI/MainFrame.cpp:339
msgid "Show the plater"
msgstr "Show the plater"

#: src/slic3r/GUI/MainFrame.cpp:346
msgid "P&rint Settings Tab"
msgstr "P&rint Settings Tab"

#: src/slic3r/GUI/MainFrame.cpp:346
msgid "Show the print settings"
msgstr "Show the print settings"

#: src/slic3r/GUI/MainFrame.cpp:348
msgid "&Filament Settings Tab"
msgstr "&Filament Settings Tab"

#: src/slic3r/GUI/MainFrame.cpp:348
msgid "Show the filament settings"
msgstr "Show the filament settings"

#: src/slic3r/GUI/MainFrame.cpp:350
msgid "Print&er Settings Tab"
msgstr "Print&er Settings Tab"

#: src/slic3r/GUI/MainFrame.cpp:350
msgid "Show the printer settings"
msgstr "Show the printer settings"

#: src/slic3r/GUI/MainFrame.cpp:354
msgid "3&D"
msgstr "3&D"

#: src/slic3r/GUI/MainFrame.cpp:354
msgid "Show the 3D editing view"
msgstr "Show the 3D editing view"

#: src/slic3r/GUI/MainFrame.cpp:356
msgid "Pre&view"
msgstr "Pre&view"

#: src/slic3r/GUI/MainFrame.cpp:356
msgid "Show the 3D slices preview"
msgstr "Show the 3D slices preview"

#: src/slic3r/GUI/MainFrame.cpp:377
msgid "Print &Host Upload Queue"
msgstr "Print &Host Upload Queue"

#: src/slic3r/GUI/MainFrame.cpp:377
msgid "Display the Print Host Upload Queue window"
msgstr "Display the Print Host Upload Queue window"

#: src/slic3r/GUI/MainFrame.cpp:388
msgid "&Iso"
msgstr "&Iso"

#: src/slic3r/GUI/MainFrame.cpp:388
msgid "Iso View"
msgstr "Iso View"

#: src/slic3r/GUI/MainFrame.cpp:390
msgid "&Top"
msgstr "&Top"

#: src/slic3r/GUI/MainFrame.cpp:390
msgid "Top View"
msgstr "Top View"

#: src/slic3r/GUI/MainFrame.cpp:391
msgid "&Bottom"
msgstr "&Bottom"

#: src/slic3r/GUI/MainFrame.cpp:391
msgid "Bottom View"
msgstr "Bottom View"

#: src/slic3r/GUI/MainFrame.cpp:392
msgid "&Front"
msgstr "&Front"

#: src/slic3r/GUI/MainFrame.cpp:392
msgid "Front View"
msgstr "Front View"

#: src/slic3r/GUI/MainFrame.cpp:393
msgid "R&ear"
msgstr "R&ear"

#: src/slic3r/GUI/MainFrame.cpp:393
msgid "Rear View"
msgstr "Rear View"

#: src/slic3r/GUI/MainFrame.cpp:394
msgid "&Left"
msgstr "&Left"

#: src/slic3r/GUI/MainFrame.cpp:394
msgid "Left View"
msgstr "Left View"

#: src/slic3r/GUI/MainFrame.cpp:395
msgid "&Right"
msgstr "&Right"

#: src/slic3r/GUI/MainFrame.cpp:395
msgid "Right View"
msgstr "Right View"

#: src/slic3r/GUI/MainFrame.cpp:409
msgid "Prusa 3D &Drivers"
msgstr "Prusa 3D &Drivers"

#: src/slic3r/GUI/MainFrame.cpp:409
msgid "Open the Prusa3D drivers download page in your browser"
msgstr "Open the Prusa3D drivers download page in your browser"

#: src/slic3r/GUI/MainFrame.cpp:411
msgid "Prusa Edition &Releases"
msgstr "Prusa Edition &Releases"

#: src/slic3r/GUI/MainFrame.cpp:411
msgid "Open the Prusa Edition releases page in your browser"
msgstr "Open the Prusa Edition releases page in your browser"

#: src/slic3r/GUI/MainFrame.cpp:417
msgid "Slic3r &Website"
msgstr "Slic3r &Website"

#: src/slic3r/GUI/MainFrame.cpp:417
msgid "Open the Slic3r website in your browser"
msgstr "Open the Slic3r website in your browser"

#: src/slic3r/GUI/MainFrame.cpp:419
msgid "Slic3r &Manual"
msgstr "Slic3r &Manual"

#: src/slic3r/GUI/MainFrame.cpp:419
msgid "Open the Slic3r manual in your browser"
msgstr "Open the Slic3r manual in your browser"

#: src/slic3r/GUI/MainFrame.cpp:422
msgid "System &Info"
msgstr "System &Info"

#: src/slic3r/GUI/MainFrame.cpp:422
msgid "Show system information"
msgstr "Show system information"

#: src/slic3r/GUI/MainFrame.cpp:424
msgid "Show &Configuration Folder"
msgstr "Show &Configuration Folder"

#: src/slic3r/GUI/MainFrame.cpp:424
msgid "Show user configuration folder (datadir)"
msgstr "Show user configuration folder (datadir)"

#: src/slic3r/GUI/MainFrame.cpp:426
msgid "Report an I&ssue"
msgstr "Report an I&ssue"

#: src/slic3r/GUI/MainFrame.cpp:426
msgid "Report an issue on the Slic3r Prusa Edition"
msgstr "Report an issue on the Slic3r Prusa Edition"

#: src/slic3r/GUI/MainFrame.cpp:428
msgid "&About Slic3r"
msgstr "&About Slic3r"

#: src/slic3r/GUI/MainFrame.cpp:428
msgid "Show about dialog"
msgstr "Show about dialog"

#: src/slic3r/GUI/MainFrame.cpp:431
msgid "&Keyboard Shortcuts"
msgstr "&Keyboard Shortcuts"

#: src/slic3r/GUI/MainFrame.cpp:431
msgid "Show the list of the keyboard shortcuts"
msgstr "Show the list of the keyboard shortcuts"

#: src/slic3r/GUI/MainFrame.cpp:439
msgid "&File"
msgstr "&File"

#: src/slic3r/GUI/MainFrame.cpp:440
msgid "&Edit"
msgstr "&Edit"

#: src/slic3r/GUI/MainFrame.cpp:441
msgid "&Window"
msgstr "&Window"

#: src/slic3r/GUI/MainFrame.cpp:442
msgid "&View"
msgstr "&View"

#: src/slic3r/GUI/MainFrame.cpp:445
msgid "&Help"
msgstr "&Help"

#: src/slic3r/GUI/MainFrame.cpp:472
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"

#: src/slic3r/GUI/MainFrame.cpp:486
msgid "No previously sliced file."
msgstr "No previously sliced file."

#: src/slic3r/GUI/MainFrame.cpp:487 src/slic3r/GUI/PrintHostDialogs.cpp:173
msgid "Error"
msgstr "Error"

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Previously sliced file ("
msgstr "Previously sliced file ("

#: src/slic3r/GUI/MainFrame.cpp:492
msgid ") not found."
msgstr ") not found."

#: src/slic3r/GUI/MainFrame.cpp:493
msgid "File Not Found"
msgstr "File Not Found"

#: src/slic3r/GUI/MainFrame.cpp:531 src/slic3r/GUI/Tab.cpp:3031
msgid "Save "
msgstr "Save "

#: src/slic3r/GUI/MainFrame.cpp:531
msgid "SVG"
msgstr "SVG"

#: src/slic3r/GUI/MainFrame.cpp:531
msgid "G-code"
msgstr "G-code"

#: src/slic3r/GUI/MainFrame.cpp:531
msgid " file as:"
msgstr " file as:"

#: src/slic3r/GUI/MainFrame.cpp:548
msgid "Save zip file as:"
msgstr "Save zip file as:"

#: src/slic3r/GUI/MainFrame.cpp:560
msgid "Slicing"
msgstr "Slicing"

#: src/slic3r/GUI/MainFrame.cpp:560
msgid "Processing "
msgstr "Processing "

#: src/slic3r/GUI/MainFrame.cpp:583
msgid " was successfully sliced."
msgstr " was successfully sliced."

#: src/slic3r/GUI/MainFrame.cpp:585
msgid "Slicing Done!"
msgstr "Slicing Done!"

#: src/slic3r/GUI/MainFrame.cpp:600
msgid "Select the STL file to repair:"
msgstr "Select the STL file to repair:"

#: src/slic3r/GUI/MainFrame.cpp:614
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr "Save OBJ file (less prone to coordinate errors than STL) as:"

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Your file was repaired."
msgstr "Your file was repaired."

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Repair"
msgstr "Repair"

#: src/slic3r/GUI/MainFrame.cpp:643
msgid "Save configuration as:"
msgstr "Save configuration as:"

#: src/slic3r/GUI/MainFrame.cpp:663 src/slic3r/GUI/MainFrame.cpp:727
msgid "Select configuration to load:"
msgstr "Select configuration to load:"

#: src/slic3r/GUI/MainFrame.cpp:700
msgid "Save presets bundle as:"
msgstr "Save presets bundle as:"

#: src/slic3r/GUI/MainFrame.cpp:751
#, c-format
msgid "%d presets successfully imported."
msgstr "%d presets successfully imported."

#: src/slic3r/GUI/MsgDialog.cpp:66
msgid "Slic3r error"
msgstr "Slic3r error"

#: src/slic3r/GUI/MsgDialog.cpp:66
msgid "Slic3r has encountered an error"
msgstr "Slic3r has encountered an error"

#: src/slic3r/GUI/MsgDialog.cpp:84
msgid "Copy to clipboard"
msgstr "Copy to clipboard"

#: src/slic3r/GUI/Plater.cpp:107
msgid "Info"
msgstr "Info"

#: src/slic3r/GUI/Plater.cpp:126
msgid "Volume"
msgstr "Volume"

#: src/slic3r/GUI/Plater.cpp:127
msgid "Facets"
msgstr "Facets"

#: src/slic3r/GUI/Plater.cpp:128
msgid "Materials"
msgstr "Materials"

#: src/slic3r/GUI/Plater.cpp:131
msgid "Manifold"
msgstr "Manifold"

#: src/slic3r/GUI/Plater.cpp:174
msgid "Sliced Info"
msgstr "Sliced Info"

#: src/slic3r/GUI/Plater.cpp:193 src/slic3r/GUI/Plater.cpp:823
msgid "Used Filament (m)"
msgstr "Used Filament (m)"

#: src/slic3r/GUI/Plater.cpp:194
msgid "Used Filament (mm³)"
msgstr "Used Filament (mm³)"

#: src/slic3r/GUI/Plater.cpp:195
msgid "Used Filament (g)"
msgstr "Used Filament (g)"

#: src/slic3r/GUI/Plater.cpp:196 src/slic3r/GUI/Plater.cpp:838
#: src/libslic3r/PrintConfig.cpp:718
msgid "Cost"
msgstr "Cost"

#: src/slic3r/GUI/Plater.cpp:197 src/slic3r/GUI/Plater.cpp:852
msgid "Estimated printing time"
msgstr "Estimated printing time"

#: src/slic3r/GUI/Plater.cpp:198
msgid "Number of tool changes"
msgstr "Number of tool changes"

#: src/slic3r/GUI/Plater.cpp:361
msgid "Support"
msgstr "Support"

#: src/slic3r/GUI/Plater.cpp:364
msgid "Select what kind of support do you need"
msgstr "Select what kind of support do you need"

#: src/slic3r/GUI/Plater.cpp:365 src/libslic3r/GCode/PreviewData.cpp:162
msgid "None"
msgstr "None"

#: src/slic3r/GUI/Plater.cpp:366 src/libslic3r/PrintConfig.cpp:1904
msgid "Support on build plate only"
msgstr "Support on build plate only"

#: src/slic3r/GUI/Plater.cpp:367
msgid "Everywhere"
msgstr "Everywhere"

#: src/slic3r/GUI/Plater.cpp:379 src/slic3r/GUI/Tab.cpp:977
msgid "Brim"
msgstr "Brim"

#: src/slic3r/GUI/Plater.cpp:381
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""
"This flag enables the brim that will be printed around each object on the "
"first layer."

#: src/slic3r/GUI/Plater.cpp:390
msgid "Purging volumes"
msgstr "Purging volumes"

#: src/slic3r/GUI/Plater.cpp:556
msgid "Print settings"
msgstr "Print settings"

#: src/slic3r/GUI/Plater.cpp:557 src/slic3r/GUI/Tab.cpp:1380
#: src/slic3r/GUI/Tab.cpp:1381
msgid "Filament"
msgstr "Filament"

#: src/slic3r/GUI/Plater.cpp:558 src/slic3r/GUI/Preset.cpp:1158
msgid "SLA print"
msgstr "SLA print"

#: src/slic3r/GUI/Plater.cpp:559 src/slic3r/GUI/Preset.cpp:1159
msgid "SLA material"
msgstr "SLA material"

#: src/slic3r/GUI/Plater.cpp:560
msgid "Printer"
msgstr "Printer"

#: src/slic3r/GUI/Plater.cpp:588
msgid "Send to printer"
msgstr "Send to printer"

#: src/slic3r/GUI/Plater.cpp:607
msgid "Slice now"
msgstr "Slice now"

#: src/slic3r/GUI/Plater.cpp:787
#, c-format
msgid "%d (%d shells)"
msgstr "%d (%d shells)"

#: src/slic3r/GUI/Plater.cpp:792
#, c-format
msgid "Auto-repaired (%d errors)"
msgstr "Auto-repaired (%d errors)"

#: src/slic3r/GUI/Plater.cpp:795
#, c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"

#: src/slic3r/GUI/Plater.cpp:805
msgid "Yes"
msgstr "Yes"

#: src/slic3r/GUI/Plater.cpp:825 src/slic3r/GUI/Plater.cpp:840
msgid "objects"
msgstr "objects"

#: src/slic3r/GUI/Plater.cpp:825 src/slic3r/GUI/Plater.cpp:840
msgid "wipe tower"
msgstr "wipe tower"

#: src/slic3r/GUI/Plater.cpp:855
msgid "normal mode"
msgstr "normal mode"

#: src/slic3r/GUI/Plater.cpp:859
msgid "silent mode"
msgstr "silent mode"

#: src/slic3r/GUI/Plater.cpp:1304
msgid "Loading"
msgstr "Loading"

#: src/slic3r/GUI/Plater.cpp:1314
#, c-format
msgid "Processing input file %s\n"
msgstr "Processing input file %s\n"

#: src/slic3r/GUI/Plater.cpp:1366
msgid ""
"This file contains several objects positioned at multiple heights. Instead "
"of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?\n"
msgstr ""
"This file contains several objects positioned at multiple heights. Instead "
"of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?\n"

#: src/slic3r/GUI/Plater.cpp:1369 src/slic3r/GUI/Plater.cpp:1411
msgid "Multi-part object detected"
msgstr "Multi-part object detected"

#: src/slic3r/GUI/Plater.cpp:1388
#, c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"

#: src/slic3r/GUI/Plater.cpp:1408
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?\n"
msgstr ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?\n"

#: src/slic3r/GUI/Plater.cpp:1424
msgid "Loaded"
msgstr "Loaded"

#: src/slic3r/GUI/Plater.cpp:1492
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."

#: src/slic3r/GUI/Plater.cpp:1493
msgid "Object too large?"
msgstr "Object too large?"

#: src/slic3r/GUI/Plater.cpp:1536
msgid "Export print config"
msgstr "Export print config"

#: src/slic3r/GUI/Plater.cpp:1538
msgid "Save file as:"
msgstr "Save file as:"

#: src/slic3r/GUI/Plater.cpp:1702
msgid "Arranging canceled"
msgstr "Arranging canceled"

#: src/slic3r/GUI/Plater.cpp:1705
msgid "Arranging"
msgstr "Arranging"

#: src/slic3r/GUI/Plater.cpp:1736
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr "Could not arrange model objects! Some geometries may be invalid."

#: src/slic3r/GUI/Plater.cpp:1740
msgid "Arranging done."
msgstr "Arranging done."

#: src/slic3r/GUI/Plater.cpp:1782
msgid "Orientation search canceled"
msgstr "Orientation search canceled"

#: src/slic3r/GUI/Plater.cpp:1787
msgid "Searching for optimal orientation"
msgstr "Searching for optimal orientation"

#: src/slic3r/GUI/Plater.cpp:1797
msgid "Orientation found."
msgstr "Orientation found."

#: src/slic3r/GUI/Plater.cpp:1818
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""
"The selected object can't be split because it contains more than one volume/"
"material."

#: src/slic3r/GUI/Plater.cpp:1945 src/slic3r/GUI/PrintHostDialogs.cpp:174
msgid "Cancelling"
msgstr "Cancelling"

#: src/slic3r/GUI/Plater.cpp:1962
msgid "Another export job is currently running."
msgstr "Another export job is currently running."

#: src/slic3r/GUI/Plater.cpp:2215
msgid "Export failed"
msgstr "Export failed"

#: src/slic3r/GUI/Plater.cpp:2219 src/slic3r/GUI/PrintHostDialogs.cpp:175
msgid "Cancelled"
msgstr "Cancelled"

#: src/slic3r/GUI/Plater.cpp:2346 src/slic3r/GUI/Tab.cpp:2736
msgid "Delete"
msgstr "Delete"

#: src/slic3r/GUI/Plater.cpp:2346
msgid "Remove the selected object"
msgstr "Remove the selected object"

#: src/slic3r/GUI/Plater.cpp:2349
msgid "Increase copies"
msgstr "Increase copies"

#: src/slic3r/GUI/Plater.cpp:2349
msgid "Place one more copy of the selected object"
msgstr "Place one more copy of the selected object"

#: src/slic3r/GUI/Plater.cpp:2351
msgid "Decrease copies"
msgstr "Decrease copies"

#: src/slic3r/GUI/Plater.cpp:2351
msgid "Remove one copy of the selected object"
msgstr "Remove one copy of the selected object"

#: src/slic3r/GUI/Plater.cpp:2353
msgid "Set number of copies"
msgstr "Set number of copies"

#: src/slic3r/GUI/Plater.cpp:2353
msgid "Change the number of copies of the selected object"
msgstr "Change the number of copies of the selected object"

#: src/slic3r/GUI/Plater.cpp:2363
msgid "Reload from Disk"
msgstr "Reload from Disk"

#: src/slic3r/GUI/Plater.cpp:2363
msgid "Reload the selected file from Disk"
msgstr "Reload the selected file from Disk"

#: src/slic3r/GUI/Plater.cpp:2366
msgid "Export object as STL"
msgstr "Export object as STL"

#: src/slic3r/GUI/Plater.cpp:2366
msgid "Export this single object as STL file"
msgstr "Export this single object as STL file"

#: src/slic3r/GUI/Plater.cpp:2375
msgid "Along X axis"
msgstr "Along X axis"

#: src/slic3r/GUI/Plater.cpp:2375
msgid "Mirror the selected object along the X axis"
msgstr "Mirror the selected object along the X axis"

#: src/slic3r/GUI/Plater.cpp:2377
msgid "Along Y axis"
msgstr "Along Y axis"

#: src/slic3r/GUI/Plater.cpp:2377
msgid "Mirror the selected object along the Y axis"
msgstr "Mirror the selected object along the Y axis"

#: src/slic3r/GUI/Plater.cpp:2379
msgid "Along Z axis"
msgstr "Along Z axis"

#: src/slic3r/GUI/Plater.cpp:2379
msgid "Mirror the selected object along the Z axis"
msgstr "Mirror the selected object along the Z axis"

#: src/slic3r/GUI/Plater.cpp:2382
msgid "Mirror"
msgstr "Mirror"

#: src/slic3r/GUI/Plater.cpp:2382
msgid "Mirror the selected object"
msgstr "Mirror the selected object"

#: src/slic3r/GUI/Plater.cpp:2400
msgid "To objects"
msgstr "To objects"

#: src/slic3r/GUI/Plater.cpp:2400 src/slic3r/GUI/Plater.cpp:2431
msgid "Split the selected object into individual objects"
msgstr "Split the selected object into individual objects"

#: src/slic3r/GUI/Plater.cpp:2402
msgid "To parts"
msgstr "To parts"

#: src/slic3r/GUI/Plater.cpp:2402 src/slic3r/GUI/Plater.cpp:2451
msgid "Split the selected object into individual sub-parts"
msgstr "Split the selected object into individual sub-parts"

#: src/slic3r/GUI/Plater.cpp:2405 src/slic3r/GUI/Plater.cpp:2431
#: src/slic3r/GUI/Plater.cpp:2451
msgid "Split"
msgstr "Split"

#: src/slic3r/GUI/Plater.cpp:2405
msgid "Split the selected object"
msgstr "Split the selected object"

#: src/slic3r/GUI/Plater.cpp:2435
msgid "Optimize orientation"
msgstr "Optimize orientation"

#: src/slic3r/GUI/Plater.cpp:2435
msgid "Optimize the rotation of the object for better print results."
msgstr "Optimize the rotation of the object for better print results."

#: src/slic3r/GUI/Plater.cpp:2795
msgid "Save G-code file as:"
msgstr "Save G-code file as:"

#: src/slic3r/GUI/Plater.cpp:2795
msgid "Save Zip file as:"
msgstr "Save Zip file as:"

#: src/slic3r/GUI/Plater.cpp:2845
#, c-format
msgid "STL file exported to %s"
msgstr "STL file exported to %s"

#: src/slic3r/GUI/Plater.cpp:2861
#, c-format
msgid "AMF file exported to %s"
msgstr "AMF file exported to %s"

#: src/slic3r/GUI/Plater.cpp:2864
#, c-format
msgid "Error exporting AMF file %s"
msgstr "Error exporting AMF file %s"

#: src/slic3r/GUI/Plater.cpp:2891
#, c-format
msgid "3MF file exported to %s"
msgstr "3MF file exported to %s"

#: src/slic3r/GUI/Plater.cpp:2894
#, c-format
msgid "Error exporting 3MF file %s"
msgstr "Error exporting 3MF file %s"

#: src/slic3r/GUI/Preferences.cpp:17 src/slic3r/GUI/Tab.cpp:1712
#: src/slic3r/GUI/Tab.cpp:1911
msgid "General"
msgstr "General"

#: src/slic3r/GUI/Preferences.cpp:34
msgid "Remember output directory"
msgstr "Remember output directory"

#: src/slic3r/GUI/Preferences.cpp:36
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."

#: src/slic3r/GUI/Preferences.cpp:42
msgid "Auto-center parts"
msgstr "Auto-center parts"

#: src/slic3r/GUI/Preferences.cpp:44
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."

#: src/slic3r/GUI/Preferences.cpp:50
msgid "Background processing"
msgstr "Background processing"

#: src/slic3r/GUI/Preferences.cpp:52
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."

#: src/slic3r/GUI/Preferences.cpp:74
msgid "Suppress \" - default - \" presets"
msgstr "Suppress \" - default - \" presets"

#: src/slic3r/GUI/Preferences.cpp:76
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."

#: src/slic3r/GUI/Preferences.cpp:82
msgid "Show incompatible print and filament presets"
msgstr "Show incompatible print and filament presets"

#: src/slic3r/GUI/Preferences.cpp:84
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"

#: src/slic3r/GUI/Preferences.cpp:90
msgid "Use legacy OpenGL 1.1 rendering"
msgstr "Use legacy OpenGL 1.1 rendering"

#: src/slic3r/GUI/Preferences.cpp:92
msgid ""
"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
"try to check this checkbox. This will disable the layer height editing and "
"anti aliasing, so it is likely better to upgrade your graphics driver."
msgstr ""
"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
"try to check this checkbox. This will disable the layer height editing and "
"anti aliasing, so it is likely better to upgrade your graphics driver."

#: src/slic3r/GUI/Preferences.cpp:115
msgid "You need to restart Slic3r to make the changes effective."
msgstr "You need to restart Slic3r to make the changes effective."

#: src/slic3r/GUI/Preset.cpp:170
msgid "modified"
msgstr "modified"

#: src/slic3r/GUI/Preset.cpp:862 src/slic3r/GUI/Preset.cpp:902
#: src/slic3r/GUI/Preset.cpp:930 src/slic3r/GUI/Preset.cpp:962
#: src/slic3r/GUI/PresetBundle.cpp:1459 src/slic3r/GUI/PresetBundle.cpp:1512
msgid "System presets"
msgstr "System presets"

#: src/slic3r/GUI/Preset.cpp:906 src/slic3r/GUI/Preset.cpp:966
#: src/slic3r/GUI/PresetBundle.cpp:1517
msgid "User presets"
msgstr "User presets"

#: src/slic3r/GUI/Preset.cpp:1157
msgid "filament"
msgstr "filament"

#: src/slic3r/GUI/PresetHints.cpp:28
#, c-format
msgid ""
"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
"will be reduced so that no less than %ds are spent on that layer (however, "
"speed will never be reduced below %dmm/s)."
msgstr ""
"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
"will be reduced so that no less than %ds are spent on that layer (however, "
"speed will never be reduced below %dmm/s)."

#: src/slic3r/GUI/PresetHints.cpp:32
#, c-format
msgid ""
"\n"
"If estimated layer time is greater, but still below ~%ds, fan will run at a "
"proportionally decreasing speed between %d%% and %d%%."
msgstr ""
"\n"
"If estimated layer time is greater, but still below ~%ds, fan will run at a "
"proportionally decreasing speed between %d%% and %d%%."

#: src/slic3r/GUI/PresetHints.cpp:36
msgid ""
"\n"
"During the other layers, fan "
msgstr ""
"\n"
"During the other layers, fan "

#: src/slic3r/GUI/PresetHints.cpp:38
msgid "Fan "
msgstr "Fan "

#: src/slic3r/GUI/PresetHints.cpp:43
#, c-format
msgid "will always run at %d%% "
msgstr "will always run at %d%% "

#: src/slic3r/GUI/PresetHints.cpp:46
#, c-format
msgid "except for the first %d layers"
msgstr "except for the first %d layers"

#: src/slic3r/GUI/PresetHints.cpp:50
msgid "except for the first layer"
msgstr "except for the first layer"

#: src/slic3r/GUI/PresetHints.cpp:52
msgid "will be turned off."
msgstr "will be turned off."

#: src/slic3r/GUI/PresetHints.cpp:153
msgid "external perimeters"
msgstr "external perimeters"

#: src/slic3r/GUI/PresetHints.cpp:162
msgid "perimeters"
msgstr "perimeters"

#: src/slic3r/GUI/PresetHints.cpp:171
msgid "infill"
msgstr "infill"

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "solid infill"
msgstr "solid infill"

#: src/slic3r/GUI/PresetHints.cpp:189
msgid "top solid infill"
msgstr "top solid infill"

#: src/slic3r/GUI/PresetHints.cpp:200
msgid "support"
msgstr "support"

#: src/slic3r/GUI/PresetHints.cpp:210
msgid "support interface"
msgstr "support interface"

#: src/slic3r/GUI/PresetHints.cpp:216
msgid "First layer volumetric"
msgstr "First layer volumetric"

#: src/slic3r/GUI/PresetHints.cpp:216
msgid "Bridging volumetric"
msgstr "Bridging volumetric"

#: src/slic3r/GUI/PresetHints.cpp:216
msgid "Volumetric"
msgstr "Volumetric"

#: src/slic3r/GUI/PresetHints.cpp:217
msgid " flow rate is maximized "
msgstr " flow rate is maximized "

#: src/slic3r/GUI/PresetHints.cpp:220
msgid "by the print profile maximum"
msgstr "by the print profile maximum"

#: src/slic3r/GUI/PresetHints.cpp:221
msgid "when printing "
msgstr "when printing "

#: src/slic3r/GUI/PresetHints.cpp:222
msgid " with a volumetric rate "
msgstr " with a volumetric rate "

#: src/slic3r/GUI/PresetHints.cpp:226
#, c-format
msgid "%3.2f mm³/s"
msgstr "%3.2f mm³/s"

#: src/slic3r/GUI/PresetHints.cpp:228
#, c-format
msgid " at filament speed %3.2f mm/s."
msgstr " at filament speed %3.2f mm/s."

#: src/slic3r/GUI/PresetHints.cpp:247
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."

#: src/slic3r/GUI/PresetHints.cpp:264
#, c-format
msgid "Recommended object thin wall thickness for layer height %.2f and "
msgstr "Recommended object thin wall thickness for layer height %.2f and "

#: src/slic3r/GUI/PresetHints.cpp:271
#, c-format
msgid "%d lines: %.2lf mm"
msgstr "%d lines: %.2lf mm"

#: src/slic3r/GUI/PrintHostDialogs.cpp:29
msgid "Send G-Code to printer host"
msgstr "Send G-Code to printer host"

#: src/slic3r/GUI/PrintHostDialogs.cpp:29
msgid "Upload to Printer Host with the following filename:"
msgstr "Upload to Printer Host with the following filename:"

#: src/slic3r/GUI/PrintHostDialogs.cpp:31
msgid "Start printing after upload"
msgstr "Start printing after upload"

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr "Use forward slashes ( / ) as a directory separator if needed."

#: src/slic3r/GUI/PrintHostDialogs.cpp:111
msgid "Cancel selected"
msgstr "Cancel selected"

#: src/slic3r/GUI/PrintHostDialogs.cpp:113
msgid "Show error message"
msgstr "Show error message"

#: src/slic3r/GUI/PrintHostDialogs.cpp:115
msgid "Close"
msgstr "Close"

#: src/slic3r/GUI/PrintHostDialogs.cpp:152
#: src/slic3r/GUI/PrintHostDialogs.cpp:171
msgid "Enqueued"
msgstr "Enqueued"

#: src/slic3r/GUI/PrintHostDialogs.cpp:172
msgid "Uploading"
msgstr "Uploading"

#: src/slic3r/GUI/PrintHostDialogs.cpp:176
msgid "Completed"
msgstr "Completed"

#: src/slic3r/GUI/PrintHostDialogs.cpp:214
msgid "Error uploading to print host:"
msgstr "Error uploading to print host:"

#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr "NO RAMMING AT ALL"

#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr "Time"

#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/RammingChart.cpp:81
#: src/slic3r/GUI/WipeTowerDialog.cpp:78 src/libslic3r/PrintConfig.cpp:603
#: src/libslic3r/PrintConfig.cpp:653 src/libslic3r/PrintConfig.cpp:670
#: src/libslic3r/PrintConfig.cpp:2352 src/libslic3r/PrintConfig.cpp:2360
#: src/libslic3r/PrintConfig.cpp:2432 src/libslic3r/PrintConfig.cpp:2440
msgid "s"
msgstr "s"

#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr "Volumetric speed"

#: src/slic3r/GUI/SysInfoDialog.cpp:40
msgid "Slic3r Prusa Edition - System Information"
msgstr "Slic3r Prusa Edition - System Information"

#: src/slic3r/GUI/Tab.cpp:49 src/libslic3r/PrintConfig.cpp:202
msgid "Compatible printers"
msgstr "Compatible printers"

#: src/slic3r/GUI/Tab.cpp:50
msgid "Select the printers this profile is compatible with."
msgstr "Select the printers this profile is compatible with."

#: src/slic3r/GUI/Tab.cpp:55 src/libslic3r/PrintConfig.cpp:215
msgid "Compatible print profiles"
msgstr "Compatible print profiles"

#: src/slic3r/GUI/Tab.cpp:56
msgid "Select the print profiles this profile is compatible with."
msgstr "Select the print profiles this profile is compatible with."

#: src/slic3r/GUI/Tab.cpp:118
msgid "Save current "
msgstr "Save current "

#: src/slic3r/GUI/Tab.cpp:119
msgid "Delete this preset"
msgstr "Delete this preset"

#: src/slic3r/GUI/Tab.cpp:131
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"Hover the cursor over buttons to find more information \n"
"or click this button."

#: src/slic3r/GUI/Tab.cpp:824
msgid "It's a default preset."
msgstr "It's a default preset."

#: src/slic3r/GUI/Tab.cpp:825
msgid "It's a system preset."
msgstr "It's a system preset."

#: src/slic3r/GUI/Tab.cpp:826
msgid "Current preset is inherited from "
msgstr "Current preset is inherited from "

#: src/slic3r/GUI/Tab.cpp:831
msgid "It can't be deleted or modified. "
msgstr "It can't be deleted or modified. "

#: src/slic3r/GUI/Tab.cpp:832
msgid ""
"Any modifications should be saved as a new preset inherited from this one. "
msgstr ""
"Any modifications should be saved as a new preset inherited from this one. "

#: src/slic3r/GUI/Tab.cpp:833
msgid "To do that please specify a new name for the preset."
msgstr "To do that please specify a new name for the preset."

#: src/slic3r/GUI/Tab.cpp:837
msgid "Additional information:"
msgstr "Additional information:"

#: src/slic3r/GUI/Tab.cpp:843
msgid "printer model"
msgstr "printer model"

#: src/slic3r/GUI/Tab.cpp:851
msgid "default print profile"
msgstr "default print profile"

#: src/slic3r/GUI/Tab.cpp:854
msgid "default filament profile"
msgstr "default filament profile"

#: src/slic3r/GUI/Tab.cpp:868
msgid "default SLA material profile"
msgstr "default SLA material profile"

#: src/slic3r/GUI/Tab.cpp:872
msgid "default SLA print profile"
msgstr "default SLA print profile"

#: src/slic3r/GUI/Tab.cpp:919 src/slic3r/GUI/Tab.cpp:3174
msgid "Layers and perimeters"
msgstr "Layers and perimeters"

#: src/slic3r/GUI/Tab.cpp:920 src/libslic3r/PrintConfig.cpp:46
msgid "Layer height"
msgstr "Layer height"

#: src/slic3r/GUI/Tab.cpp:924
msgid "Vertical shells"
msgstr "Vertical shells"

#: src/slic3r/GUI/Tab.cpp:935
msgid "Horizontal shells"
msgstr "Horizontal shells"

#: src/slic3r/GUI/Tab.cpp:936 src/libslic3r/PrintConfig.cpp:1788
msgid "Solid layers"
msgstr "Solid layers"

#: src/slic3r/GUI/Tab.cpp:941
msgid "Quality (slower slicing)"
msgstr "Quality (slower slicing)"

#: src/slic3r/GUI/Tab.cpp:958
msgid "Reducing printing time"
msgstr "Reducing printing time"

#: src/slic3r/GUI/Tab.cpp:970
msgid "Skirt and brim"
msgstr "Skirt and brim"

#: src/slic3r/GUI/Tab.cpp:987
msgid "Raft"
msgstr "Raft"

#: src/slic3r/GUI/Tab.cpp:991
msgid "Options for support material and raft"
msgstr "Options for support material and raft"

#: src/slic3r/GUI/Tab.cpp:1006
msgid "Speed for print moves"
msgstr "Speed for print moves"

#: src/slic3r/GUI/Tab.cpp:1018
msgid "Speed for non-print moves"
msgstr "Speed for non-print moves"

#: src/slic3r/GUI/Tab.cpp:1021
msgid "Modifiers"
msgstr "Modifiers"

#: src/slic3r/GUI/Tab.cpp:1024
msgid "Acceleration control (advanced)"
msgstr "Acceleration control (advanced)"

#: src/slic3r/GUI/Tab.cpp:1031
msgid "Autospeed (advanced)"
msgstr "Autospeed (advanced)"

#: src/slic3r/GUI/Tab.cpp:1037
msgid "Multiple Extruders"
msgstr "Multiple Extruders"

#: src/slic3r/GUI/Tab.cpp:1045
msgid "Ooze prevention"
msgstr "Ooze prevention"

#: src/slic3r/GUI/Tab.cpp:1062
msgid "Extrusion width"
msgstr "Extrusion width"

#: src/slic3r/GUI/Tab.cpp:1072
msgid "Overlap"
msgstr "Overlap"

#: src/slic3r/GUI/Tab.cpp:1075
msgid "Flow"
msgstr "Flow"

#: src/slic3r/GUI/Tab.cpp:1078
msgid "Other"
msgstr "Other"

#: src/slic3r/GUI/Tab.cpp:1085 src/slic3r/GUI/Tab.cpp:3213
msgid "Output options"
msgstr "Output options"

#: src/slic3r/GUI/Tab.cpp:1086
msgid "Sequential printing"
msgstr "Sequential printing"

#: src/slic3r/GUI/Tab.cpp:1088
msgid "Extruder clearance (mm)"
msgstr "Extruder clearance (mm)"

#: src/slic3r/GUI/Tab.cpp:1097 src/slic3r/GUI/Tab.cpp:3214
msgid "Output file"
msgstr "Output file"

#: src/slic3r/GUI/Tab.cpp:1103 src/libslic3r/PrintConfig.cpp:1438
msgid "Post-processing scripts"
msgstr "Post-processing scripts"

#: src/slic3r/GUI/Tab.cpp:1109 src/slic3r/GUI/Tab.cpp:1110
#: src/slic3r/GUI/Tab.cpp:1483 src/slic3r/GUI/Tab.cpp:1484
#: src/slic3r/GUI/Tab.cpp:1883 src/slic3r/GUI/Tab.cpp:1884
#: src/slic3r/GUI/Tab.cpp:1964 src/slic3r/GUI/Tab.cpp:1965
#: src/slic3r/GUI/Tab.cpp:3119 src/slic3r/GUI/Tab.cpp:3120
msgid "Notes"
msgstr "Notes"

#: src/slic3r/GUI/Tab.cpp:1116 src/slic3r/GUI/Tab.cpp:1491
#: src/slic3r/GUI/Tab.cpp:1890 src/slic3r/GUI/Tab.cpp:1971
#: src/slic3r/GUI/Tab.cpp:3127 src/slic3r/GUI/Tab.cpp:3219
msgid "Dependencies"
msgstr "Dependencies"

#: src/slic3r/GUI/Tab.cpp:1117 src/slic3r/GUI/Tab.cpp:1492
#: src/slic3r/GUI/Tab.cpp:1891 src/slic3r/GUI/Tab.cpp:1972
#: src/slic3r/GUI/Tab.cpp:3128 src/slic3r/GUI/Tab.cpp:3220
msgid "Profile dependencies"
msgstr "Profile dependencies"

#: src/slic3r/GUI/Tab.cpp:1161
#, no-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- no ensure_vertical_shell_thickness\n"
"\n"
"Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- no ensure_vertical_shell_thickness\n"
"\n"
"Shall I adjust those settings in order to enable Spiral Vase?"

#: src/slic3r/GUI/Tab.cpp:1168
msgid "Spiral Vase"
msgstr "Spiral Vase"

#: src/slic3r/GUI/Tab.cpp:1191
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0).\n"
"\n"
"Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0).\n"
"\n"
"Shall I adjust those settings in order to enable the Wipe Tower?"

#: src/slic3r/GUI/Tab.cpp:1195 src/slic3r/GUI/Tab.cpp:1212
msgid "Wipe Tower"
msgstr "Wipe Tower"

#: src/slic3r/GUI/Tab.cpp:1209
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers.\n"
"\n"
"Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers.\n"
"\n"
"Shall I synchronize support layers in order to enable the Wipe Tower?"

#: src/slic3r/GUI/Tab.cpp:1227
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters\n"
"\n"
"Shall I adjust those settings for supports?"
msgstr ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters\n"
"\n"
"Shall I adjust those settings for supports?"

#: src/slic3r/GUI/Tab.cpp:1230
msgid "Support Generator"
msgstr "Support Generator"

#: src/slic3r/GUI/Tab.cpp:1272
msgid "The "
msgstr "The "

#: src/slic3r/GUI/Tab.cpp:1272
#, no-c-format
msgid ""
" infill pattern is not supposed to work at 100% density.\n"
"\n"
"Shall I switch to rectilinear fill pattern?"
msgstr ""
" infill pattern is not supposed to work at 100% density.\n"
"\n"
"Shall I switch to rectilinear fill pattern?"

#: src/slic3r/GUI/Tab.cpp:1388
msgid "Temperature "
msgstr "Temperature "

#: src/slic3r/GUI/Tab.cpp:1394
msgid "Bed"
msgstr "Bed"

#: src/slic3r/GUI/Tab.cpp:1399
msgid "Cooling"
msgstr "Cooling"

#: src/slic3r/GUI/Tab.cpp:1400 src/libslic3r/PrintConfig.cpp:1333
#: src/libslic3r/PrintConfig.cpp:2212
msgid "Enable"
msgstr "Enable"

#: src/slic3r/GUI/Tab.cpp:1411
msgid "Fan settings"
msgstr "Fan settings"

#: src/slic3r/GUI/Tab.cpp:1412
msgid "Fan speed"
msgstr "Fan speed"

#: src/slic3r/GUI/Tab.cpp:1420
msgid "Cooling thresholds"
msgstr "Cooling thresholds"

#: src/slic3r/GUI/Tab.cpp:1426
msgid "Filament properties"
msgstr "Filament properties"

#: src/slic3r/GUI/Tab.cpp:1430
msgid "Print speed override"
msgstr "Print speed override"

#: src/slic3r/GUI/Tab.cpp:1440
msgid "Toolchange parameters with single extruder MM printers"
msgstr "Toolchange parameters with single extruder MM printers"

#: src/slic3r/GUI/Tab.cpp:1455
msgid "Ramming settings"
msgstr "Ramming settings"

#: src/slic3r/GUI/Tab.cpp:1470 src/slic3r/GUI/Tab.cpp:1846
msgid "Custom G-code"
msgstr "Custom G-code"

#: src/slic3r/GUI/Tab.cpp:1471 src/slic3r/GUI/Tab.cpp:1847
#: src/libslic3r/PrintConfig.cpp:1817 src/libslic3r/PrintConfig.cpp:1833
msgid "Start G-code"
msgstr "Start G-code"

#: src/slic3r/GUI/Tab.cpp:1477 src/slic3r/GUI/Tab.cpp:1853
#: src/libslic3r/PrintConfig.cpp:333 src/libslic3r/PrintConfig.cpp:344
msgid "End G-code"
msgstr "End G-code"

#: src/slic3r/GUI/Tab.cpp:1588 src/slic3r/GUI/Tab.cpp:1642
msgid " Browse "
msgstr " Browse "

#: src/slic3r/GUI/Tab.cpp:1605 src/slic3r/GUI/Tab.cpp:1788
msgid "Test"
msgstr "Test"

#: src/slic3r/GUI/Tab.cpp:1615
msgid "Could not get a valid Printer Host reference"
msgstr "Could not get a valid Printer Host reference"

#: src/slic3r/GUI/Tab.cpp:1621 src/slic3r/GUI/Tab.cpp:1801
msgid "Success!"
msgstr "Success!"

#: src/slic3r/GUI/Tab.cpp:1636
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."

#: src/slic3r/GUI/Tab.cpp:1648
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"

#: src/slic3r/GUI/Tab.cpp:1649
msgid "Open CA certificate file"
msgstr "Open CA certificate file"

#: src/slic3r/GUI/Tab.cpp:1676
msgid ""
"HTTPS CA File:\n"
"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate "
"Store or Keychain.\n"
"\tTo use a custom CA file, please import your CA file into Certificate "
"Store / Keychain."
msgstr ""
"HTTPS CA File:\n"
"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate "
"Store or Keychain.\n"
"\tTo use a custom CA file, please import your CA file into Certificate "
"Store / Keychain."

#: src/slic3r/GUI/Tab.cpp:1713 src/slic3r/GUI/Tab.cpp:1912
msgid "Size and coordinates"
msgstr "Size and coordinates"

#: src/slic3r/GUI/Tab.cpp:1717 src/slic3r/GUI/Tab.cpp:1916
#: src/slic3r/GUI/Tab.cpp:2792
msgid " Set "
msgstr " Set "

#: src/slic3r/GUI/Tab.cpp:1740
msgid "Capabilities"
msgstr "Capabilities"

#: src/slic3r/GUI/Tab.cpp:1745
msgid "Number of extruders of the printer."
msgstr "Number of extruders of the printer."

#: src/slic3r/GUI/Tab.cpp:1773
msgid "USB/Serial connection"
msgstr "USB/Serial connection"

#: src/slic3r/GUI/Tab.cpp:1774 src/libslic3r/PrintConfig.cpp:1660
msgid "Serial port"
msgstr "Serial port"

#: src/slic3r/GUI/Tab.cpp:1779
msgid "Rescan serial ports"
msgstr "Rescan serial ports"

#: src/slic3r/GUI/Tab.cpp:1801
msgid "Connection to printer works correctly."
msgstr "Connection to printer works correctly."

#: src/slic3r/GUI/Tab.cpp:1804
msgid "Connection failed."
msgstr "Connection failed."

#: src/slic3r/GUI/Tab.cpp:1817 src/slic3r/GUI/Tab.cpp:1961
msgid "Print Host upload"
msgstr "Print Host upload"

#: src/slic3r/GUI/Tab.cpp:1859 src/libslic3r/PrintConfig.cpp:92
msgid "Before layer change G-code"
msgstr "Before layer change G-code"

#: src/slic3r/GUI/Tab.cpp:1865 src/libslic3r/PrintConfig.cpp:1042
msgid "After layer change G-code"
msgstr "After layer change G-code"

#: src/slic3r/GUI/Tab.cpp:1871 src/libslic3r/PrintConfig.cpp:2111
msgid "Tool change G-code"
msgstr "Tool change G-code"

#: src/slic3r/GUI/Tab.cpp:1877
msgid "Between objects G-code (for sequential printing)"
msgstr "Between objects G-code (for sequential printing)"

#: src/slic3r/GUI/Tab.cpp:1938
msgid "Display"
msgstr "Display"

#: src/slic3r/GUI/Tab.cpp:1949 src/slic3r/GUI/Tab.cpp:3102
msgid "Corrections"
msgstr "Corrections"

#: src/slic3r/GUI/Tab.cpp:2011 src/slic3r/GUI/Tab.cpp:2073
#: src/libslic3r/PrintConfig.cpp:1088 src/libslic3r/PrintConfig.cpp:1098
#: src/libslic3r/PrintConfig.cpp:1108 src/libslic3r/PrintConfig.cpp:1121
#: src/libslic3r/PrintConfig.cpp:1132 src/libslic3r/PrintConfig.cpp:1143
#: src/libslic3r/PrintConfig.cpp:1154
msgid "Machine limits"
msgstr "Machine limits"

#: src/slic3r/GUI/Tab.cpp:2025
msgid "Values in this column are for Full Power mode"
msgstr "Values in this column are for Full Power mode"

#: src/slic3r/GUI/Tab.cpp:2026
msgid "Full Power"
msgstr "Full Power"

#: src/slic3r/GUI/Tab.cpp:2031
msgid "Values in this column are for Silent mode"
msgstr "Values in this column are for Silent mode"

#: src/slic3r/GUI/Tab.cpp:2032
msgid "Silent"
msgstr "Silent"

#: src/slic3r/GUI/Tab.cpp:2040
msgid "Maximum feedrates"
msgstr "Maximum feedrates"

#: src/slic3r/GUI/Tab.cpp:2045
msgid "Maximum accelerations"
msgstr "Maximum accelerations"

#: src/slic3r/GUI/Tab.cpp:2052
msgid "Jerk limits"
msgstr "Jerk limits"

#: src/slic3r/GUI/Tab.cpp:2057
msgid "Minimum feedrates"
msgstr "Minimum feedrates"

#: src/slic3r/GUI/Tab.cpp:2095 src/slic3r/GUI/Tab.cpp:2103
msgid "Single extruder MM setup"
msgstr "Single extruder MM setup"

#: src/slic3r/GUI/Tab.cpp:2104
msgid "Single extruder multimaterial parameters"
msgstr "Single extruder multimaterial parameters"

#: src/slic3r/GUI/Tab.cpp:2118 src/libslic3r/GCode/PreviewData.cpp:475
#, c-format
msgid "Extruder %d"
msgstr "Extruder %d"

#: src/slic3r/GUI/Tab.cpp:2125
msgid "Layer height limits"
msgstr "Layer height limits"

#: src/slic3r/GUI/Tab.cpp:2130
msgid "Position (for multi-extruder printers)"
msgstr "Position (for multi-extruder printers)"

#: src/slic3r/GUI/Tab.cpp:2133
msgid "Retraction"
msgstr "Retraction"

#: src/slic3r/GUI/Tab.cpp:2136
msgid "Only lift Z"
msgstr "Only lift Z"

#: src/slic3r/GUI/Tab.cpp:2149
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"

#: src/slic3r/GUI/Tab.cpp:2153
msgid "Preview"
msgstr "Preview"

#: src/slic3r/GUI/Tab.cpp:2284
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"

#: src/slic3r/GUI/Tab.cpp:2286
msgid "Firmware Retraction"
msgstr "Firmware Retraction"

#: src/slic3r/GUI/Tab.cpp:2565
#, c-format
msgid "Default preset (%s)"
msgstr "Default preset (%s)"

#: src/slic3r/GUI/Tab.cpp:2566
#, c-format
msgid "Preset (%s)"
msgstr "Preset (%s)"

#: src/slic3r/GUI/Tab.cpp:2583
msgid "has the following unsaved changes:"
msgstr "has the following unsaved changes:"

#: src/slic3r/GUI/Tab.cpp:2586
msgid "is not compatible with printer"
msgstr "is not compatible with printer"

#: src/slic3r/GUI/Tab.cpp:2587
msgid "is not compatible with print profile"
msgstr "is not compatible with print profile"

#: src/slic3r/GUI/Tab.cpp:2589
msgid "and it has the following unsaved changes:"
msgstr "and it has the following unsaved changes:"

#: src/slic3r/GUI/Tab.cpp:2592
msgid "Discard changes and continue anyway?"
msgstr "Discard changes and continue anyway?"

#: src/slic3r/GUI/Tab.cpp:2593
msgid "Unsaved Changes"
msgstr "Unsaved Changes"

#: src/slic3r/GUI/Tab.cpp:2604
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr "It's impossible to print multi-part object(s) with SLA technology."

#: src/slic3r/GUI/Tab.cpp:2605
msgid "Please check your object list before preset changing."
msgstr "Please check your object list before preset changing."

#: src/slic3r/GUI/Tab.cpp:2699
msgid "The supplied name is empty. It can't be saved."
msgstr "The supplied name is empty. It can't be saved."

#: src/slic3r/GUI/Tab.cpp:2704
msgid "Cannot overwrite a system profile."
msgstr "Cannot overwrite a system profile."

#: src/slic3r/GUI/Tab.cpp:2708
msgid "Cannot overwrite an external profile."
msgstr "Cannot overwrite an external profile."

#: src/slic3r/GUI/Tab.cpp:2734
msgid "remove"
msgstr "remove"

#: src/slic3r/GUI/Tab.cpp:2734
msgid "delete"
msgstr "delete"

#: src/slic3r/GUI/Tab.cpp:2735
msgid "Are you sure you want to "
msgstr "Are you sure you want to "

#: src/slic3r/GUI/Tab.cpp:2735
msgid " the selected preset?"
msgstr " the selected preset?"

#: src/slic3r/GUI/Tab.cpp:2736
msgid "Remove"
msgstr "Remove"

#: src/slic3r/GUI/Tab.cpp:2737
msgid " Preset"
msgstr " Preset"

#: src/slic3r/GUI/Tab.cpp:2791
msgid "All"
msgstr "All"

#: src/slic3r/GUI/Tab.cpp:2869
msgid ""
"LOCKED LOCK;indicates that the settings are the same as the system values "
"for the current option group"
msgstr ""
"LOCKED LOCK;indicates that the settings are the same as the system values "
"for the current option group"

#: src/slic3r/GUI/Tab.cpp:2872
msgid ""
"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
"the system values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system values."
msgstr ""
"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
"the system values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system values."

#: src/slic3r/GUI/Tab.cpp:2878
msgid ""
"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."
msgstr ""
"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."

#: src/slic3r/GUI/Tab.cpp:2882
msgid ""
"BACK ARROW;indicates that the settings were changed and are not equal to the "
"last saved preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""
"BACK ARROW;indicates that the settings were changed and are not equal to the "
"last saved preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."

#: src/slic3r/GUI/Tab.cpp:2908
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system "
"values for the current option group"
msgstr ""
"LOCKED LOCK icon indicates that the settings are the same as the system "
"values for the current option group"

#: src/slic3r/GUI/Tab.cpp:2910
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system values for the current option group.\n"
"Click to reset all settings for current option group to the system values."
msgstr ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system values for the current option group.\n"
"Click to reset all settings for current option group to the system values."

#: src/slic3r/GUI/Tab.cpp:2913
msgid "WHITE BULLET icon indicates a non system preset."
msgstr "WHITE BULLET icon indicates a non system preset."

#: src/slic3r/GUI/Tab.cpp:2916
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."

#: src/slic3r/GUI/Tab.cpp:2918
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."

#: src/slic3r/GUI/Tab.cpp:2924
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system value."
msgstr ""
"LOCKED LOCK icon indicates that the value is the same as the system value."

#: src/slic3r/GUI/Tab.cpp:2925
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system value.\n"
"Click to reset current value to the system value."
msgstr ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system value.\n"
"Click to reset current value to the system value."

#: src/slic3r/GUI/Tab.cpp:2931
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."

#: src/slic3r/GUI/Tab.cpp:2932
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."

#: src/slic3r/GUI/Tab.cpp:3031
msgid " as:"
msgstr " as:"

#: src/slic3r/GUI/Tab.cpp:3075
msgid "the following postfix are not allowed:"
msgstr "the following postfix are not allowed:"

#: src/slic3r/GUI/Tab.cpp:3079
msgid "The supplied name is not available."
msgstr "The supplied name is not available."

#: src/slic3r/GUI/Tab.cpp:3092
msgid "Material"
msgstr "Material"

#: src/slic3r/GUI/Tab.cpp:3094 src/slic3r/GUI/Tab.cpp:3176
msgid "Layers"
msgstr "Layers"

#: src/slic3r/GUI/Tab.cpp:3098
msgid "Exposure"
msgstr "Exposure"

#: src/slic3r/GUI/Tab.cpp:3183
msgid "Support head"
msgstr "Support head"

#: src/slic3r/GUI/Tab.cpp:3188
msgid "Support pillar"
msgstr "Support pillar"

#: src/slic3r/GUI/Tab.cpp:3196
msgid "Connection of the support sticks and junctions"
msgstr "Connection of the support sticks and junctions"

#: src/slic3r/GUI/Tab.cpp:3200
msgid "Automatic generation"
msgstr "Automatic generation"

#: src/slic3r/GUI/Tab.hpp:293 src/slic3r/GUI/Tab.hpp:381
msgid "Print Settings"
msgstr "Print Settings"

#: src/slic3r/GUI/Tab.hpp:311
msgid "Filament Settings"
msgstr "Filament Settings"

#: src/slic3r/GUI/Tab.hpp:344
msgid "Printer Settings"
msgstr "Printer Settings"

#: src/slic3r/GUI/Tab.hpp:367
msgid "Material Settings"
msgstr "Material Settings"

#: src/slic3r/GUI/Tab.hpp:393
msgid "Save preset"
msgstr "Save preset"

#: src/slic3r/GUI/UpdateDialogs.cpp:28
msgid "Update available"
msgstr "Update available"

#: src/slic3r/GUI/UpdateDialogs.cpp:28
msgid "New version of Slic3r PE is available"
msgstr "New version of Slic3r PE is available"

#: src/slic3r/GUI/UpdateDialogs.cpp:35
msgid "To download, follow the link below."
msgstr "To download, follow the link below."

#: src/slic3r/GUI/UpdateDialogs.cpp:42
msgid "Current version:"
msgstr "Current version:"

#: src/slic3r/GUI/UpdateDialogs.cpp:44
msgid "New version:"
msgstr "New version:"

#: src/slic3r/GUI/UpdateDialogs.cpp:52
msgid "Don't notify about new releases any more"
msgstr "Don't notify about new releases any more"

#: src/slic3r/GUI/UpdateDialogs.cpp:70 src/slic3r/GUI/UpdateDialogs.cpp:162
msgid "Configuration update"
msgstr "Configuration update"

#: src/slic3r/GUI/UpdateDialogs.cpp:70
msgid "Configuration update is available"
msgstr "Configuration update is available"

#: src/slic3r/GUI/UpdateDialogs.cpp:73
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"

#: src/slic3r/GUI/UpdateDialogs.cpp:109
msgid "Slic3r incompatibility"
msgstr "Slic3r incompatibility"

#: src/slic3r/GUI/UpdateDialogs.cpp:109
msgid "Slic3r configuration is incompatible"
msgstr "Slic3r configuration is incompatible"

#: src/slic3r/GUI/UpdateDialogs.cpp:112
msgid ""
"This version of Slic3r PE is not compatible with currently installed "
"configuration bundles.\n"
"This probably happened as a result of running an older Slic3r PE after using "
"a newer one.\n"
"\n"
"You may either exit Slic3r and try again with a newer version, or you may re-"
"run the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this Slic3r.\n"
msgstr ""
"This version of Slic3r PE is not compatible with currently installed "
"configuration bundles.\n"
"This probably happened as a result of running an older Slic3r PE after using "
"a newer one.\n"
"\n"
"You may either exit Slic3r and try again with a newer version, or you may re-"
"run the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this Slic3r.\n"

#: src/slic3r/GUI/UpdateDialogs.cpp:121
#, c-format
msgid "This Slic3r PE version: %s"
msgstr "This Slic3r PE version: %s"

#: src/slic3r/GUI/UpdateDialogs.cpp:126
msgid "Incompatible bundles:"
msgstr "Incompatible bundles:"

#: src/slic3r/GUI/UpdateDialogs.cpp:142
msgid "Exit Slic3r"
msgstr "Exit Slic3r"

#: src/slic3r/GUI/UpdateDialogs.cpp:145
msgid "Re-configure"
msgstr "Re-configure"

#: src/slic3r/GUI/UpdateDialogs.cpp:166
#, c-format
msgid ""
"Slic3r PE now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""
"Slic3r PE now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."

#: src/slic3r/GUI/UpdateDialogs.cpp:182
msgid "For more information please visit our wiki page:"
msgstr "For more information please visit our wiki page:"

#: src/slic3r/GUI/WipeTowerDialog.cpp:10
msgid "Ramming customization"
msgstr "Ramming customization"

#: src/slic3r/GUI/WipeTowerDialog.cpp:36
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."

#: src/slic3r/GUI/WipeTowerDialog.cpp:78
msgid "Total ramming time"
msgstr "Total ramming time"

#: src/slic3r/GUI/WipeTowerDialog.cpp:80
msgid "Total rammed volume"
msgstr "Total rammed volume"

#: src/slic3r/GUI/WipeTowerDialog.cpp:84
msgid "Ramming line width"
msgstr "Ramming line width"

#: src/slic3r/GUI/WipeTowerDialog.cpp:86
msgid "Ramming line spacing"
msgstr "Ramming line spacing"

#: src/slic3r/GUI/WipeTowerDialog.cpp:138
msgid "Wipe tower - Purging volume adjustment"
msgstr "Wipe tower - Purging volume adjustment"

#: src/slic3r/GUI/WipeTowerDialog.cpp:219
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."

#: src/slic3r/GUI/WipeTowerDialog.cpp:220
msgid "Extruder changed to"
msgstr "Extruder changed to"

#: src/slic3r/GUI/WipeTowerDialog.cpp:228
msgid "unloaded"
msgstr "unloaded"

#: src/slic3r/GUI/WipeTowerDialog.cpp:229
msgid "loaded"
msgstr "loaded"

#: src/slic3r/GUI/WipeTowerDialog.cpp:234
msgid "Tool #"
msgstr "Tool #"

#: src/slic3r/GUI/WipeTowerDialog.cpp:241
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."

#: src/slic3r/GUI/WipeTowerDialog.cpp:242
msgid "Volume to purge (mm³) when the filament is being"
msgstr "Volume to purge (mm³) when the filament is being"

#: src/slic3r/GUI/WipeTowerDialog.cpp:256
msgid "From"
msgstr "From"

#: src/slic3r/GUI/WipeTowerDialog.cpp:321
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"

#: src/slic3r/GUI/WipeTowerDialog.cpp:333
msgid "Show simplified settings"
msgstr "Show simplified settings"

#: src/slic3r/GUI/WipeTowerDialog.cpp:333
msgid "Show advanced settings"
msgstr "Show advanced settings"

#: src/slic3r/Utils/OctoPrint.cpp:65
#, c-format
msgid "Mismatched type of print host: %s"
msgstr "Mismatched type of print host: %s"

#: src/slic3r/Utils/OctoPrint.cpp:80
msgid "Connection to OctoPrint works correctly."
msgstr "Connection to OctoPrint works correctly."

#: src/slic3r/Utils/OctoPrint.cpp:86
msgid "Could not connect to OctoPrint"
msgstr "Could not connect to OctoPrint"

#: src/slic3r/Utils/OctoPrint.cpp:86
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "Note: OctoPrint version at least 1.1.0 is required."

#: src/slic3r/Utils/OctoPrint.cpp:181
msgid "Connection to Prusa SLA works correctly."
msgstr "Connection to Prusa SLA works correctly."

#: src/slic3r/Utils/OctoPrint.cpp:186
msgid "Could not connect to Prusa SLA"
msgstr "Could not connect to Prusa SLA"

#: src/slic3r/Utils/PresetUpdater.cpp:571
#, c-format
msgid "requires min. %s and max. %s"
msgstr "requires min. %s and max. %s"

#: src/slic3r/Utils/PresetUpdater.cpp:576
#, c-format
msgid "requires min. %s"
msgstr "requires min. %s"

#: src/slic3r/Utils/PresetUpdater.cpp:578
#, c-format
msgid "requires max. %s"
msgstr "requires max. %s"

#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:349
msgid "Exporting the source model"
msgstr "Exporting the source model"

#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr "Failed loading the input model."

#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing the model by the Netfabb service"
msgstr "Repairing the model by the Netfabb service"

#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr "Mesh repair failed."

#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:367
msgid "Loading the repaired model"
msgstr "Loading the repaired model"

#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr "Saving mesh into the 3MF container failed."

#: src/slic3r/Utils/FixModelByWin10.cpp:334
msgid "Model fixing"
msgstr "Model fixing"

#: src/slic3r/Utils/FixModelByWin10.cpp:335
msgid "Exporting model..."
msgstr "Exporting model..."

#: src/slic3r/Utils/FixModelByWin10.cpp:357
msgid "Export of a temporary 3mf file failed"
msgstr "Export of a temporary 3mf file failed"

#: src/slic3r/Utils/FixModelByWin10.cpp:372
msgid "Import of the repaired 3mf file failed"
msgstr "Import of the repaired 3mf file failed"

#: src/slic3r/Utils/FixModelByWin10.cpp:375
msgid "Model repair finished"
msgstr "Model repair finished"

#: src/slic3r/Utils/FixModelByWin10.cpp:379
msgid "Model repair canceled"
msgstr "Model repair canceled"

#: src/slic3r/Utils/FixModelByWin10.cpp:396
msgid "Model repaired successfully"
msgstr "Model repaired successfully"

#: src/slic3r/Utils/FixModelByWin10.cpp:396
#: src/slic3r/Utils/FixModelByWin10.cpp:399
msgid "Model Repair by the Netfabb service"
msgstr "Model Repair by the Netfabb service"

#: src/slic3r/Utils/FixModelByWin10.cpp:399
msgid "Model repair failed: \n"
msgstr "Model repair failed: \n"

#: src/libslic3r/Print.cpp:1175
msgid "All objects are outside of the print volume."
msgstr "All objects are outside of the print volume."

#: src/libslic3r/Print.cpp:1201
msgid "Some objects are too close; your extruder will collide with them."
msgstr "Some objects are too close; your extruder will collide with them."

#: src/libslic3r/Print.cpp:1216
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""
"Some objects are too tall and cannot be printed without extruder collisions."

#: src/libslic3r/Print.cpp:1226
msgid "The Spiral Vase option can only be used when printing a single object."
msgstr "The Spiral Vase option can only be used when printing a single object."

#: src/libslic3r/Print.cpp:1228
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""
"The Spiral Vase option can only be used when printing single material "
"objects."

#: src/libslic3r/Print.cpp:1234
msgid ""
"All extruders must have the same diameter for single extruder multimaterial "
"printer."
msgstr ""
"All extruders must have the same diameter for single extruder multimaterial "
"printer."

#: src/libslic3r/Print.cpp:1239
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."
msgstr ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."

#: src/libslic3r/Print.cpp:1241
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."

#: src/libslic3r/Print.cpp:1253
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heigths"
msgstr ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heigths"

#: src/libslic3r/Print.cpp:1255
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"

#: src/libslic3r/Print.cpp:1257
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"

#: src/libslic3r/Print.cpp:1259
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."

#: src/libslic3r/Print.cpp:1281
msgid ""
"The Wipe tower is only supported if all objects have the same layer height "
"profile"
msgstr ""
"The Wipe tower is only supported if all objects have the same layer height "
"profile"

#: src/libslic3r/Print.cpp:1290
msgid "The supplied settings will cause an empty print."
msgstr "The supplied settings will cause an empty print."

#: src/libslic3r/Print.cpp:1307
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""
"One or more object were assigned an extruder that the printer does not have."

#: src/libslic3r/Print.cpp:1316
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."

#: src/libslic3r/Print.cpp:1324
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."

#: src/libslic3r/Print.cpp:1328
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."

#: src/libslic3r/Print.cpp:1335
msgid "first_layer_height"
msgstr "first_layer_height"

#: src/libslic3r/Print.cpp:1350
msgid "First layer height can't be greater than nozzle diameter"
msgstr "First layer height can't be greater than nozzle diameter"

#: src/libslic3r/Print.cpp:1354
msgid "Layer height can't be greater than nozzle diameter"
msgstr "Layer height can't be greater than nozzle diameter"

#: src/libslic3r/PrintConfig.cpp:32 src/libslic3r/PrintConfig.cpp:33
msgid "Printer technology"
msgstr "Printer technology"

#: src/libslic3r/PrintConfig.cpp:41
msgid "Bed shape"
msgstr "Bed shape"

#: src/libslic3r/PrintConfig.cpp:48
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."

#: src/libslic3r/PrintConfig.cpp:56
msgid "Max print height"
msgstr "Max print height"

#: src/libslic3r/PrintConfig.cpp:57
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."

#: src/libslic3r/PrintConfig.cpp:73
msgid "Avoid crossing perimeters"
msgstr "Avoid crossing perimeters"

#: src/libslic3r/PrintConfig.cpp:74
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."

#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:2080
msgid "Other layers"
msgstr "Other layers"

#: src/libslic3r/PrintConfig.cpp:83
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."

#: src/libslic3r/PrintConfig.cpp:86
msgid "Bed temperature"
msgstr "Bed temperature"

#: src/libslic3r/PrintConfig.cpp:93
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."

#: src/libslic3r/PrintConfig.cpp:104
msgid "Between objects G-code"
msgstr "Between objects G-code"

#: src/libslic3r/PrintConfig.cpp:105
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."

#: src/libslic3r/PrintConfig.cpp:114
msgctxt "Layers"
msgid "Bottom"
msgstr "Bottom"

#: src/libslic3r/PrintConfig.cpp:116
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "Number of solid layers to generate on bottom surfaces."

#: src/libslic3r/PrintConfig.cpp:118
msgid "Bottom solid layers"
msgstr "Bottom solid layers"

#: src/libslic3r/PrintConfig.cpp:123
msgid "Bridge"
msgstr "Bridge"

#: src/libslic3r/PrintConfig.cpp:124
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."

#: src/libslic3r/PrintConfig.cpp:126 src/libslic3r/PrintConfig.cpp:274
#: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:941
#: src/libslic3r/PrintConfig.cpp:1100 src/libslic3r/PrintConfig.cpp:1145
#: src/libslic3r/PrintConfig.cpp:1156 src/libslic3r/PrintConfig.cpp:1386
msgid "mm/s²"
msgstr "mm/s²"

#: src/libslic3r/PrintConfig.cpp:133
msgid "Bridging angle"
msgstr "Bridging angle"

#: src/libslic3r/PrintConfig.cpp:135
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."

#: src/libslic3r/PrintConfig.cpp:138 src/libslic3r/PrintConfig.cpp:734
#: src/libslic3r/PrintConfig.cpp:1637 src/libslic3r/PrintConfig.cpp:1648
#: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:2063
#: src/libslic3r/PrintConfig.cpp:2578
msgid "°"
msgstr "°"

#: src/libslic3r/PrintConfig.cpp:145
msgid "Bridges fan speed"
msgstr "Bridges fan speed"

#: src/libslic3r/PrintConfig.cpp:146
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr "This fan speed is enforced during all bridges and overhangs."

#: src/libslic3r/PrintConfig.cpp:147 src/libslic3r/PrintConfig.cpp:747
#: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1232
#: src/libslic3r/PrintConfig.cpp:1517
msgid "%"
msgstr "%"

#: src/libslic3r/PrintConfig.cpp:155
msgid "Bridge flow ratio"
msgstr "Bridge flow ratio"

#: src/libslic3r/PrintConfig.cpp:157
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."

#: src/libslic3r/PrintConfig.cpp:168
msgid "Bridges"
msgstr "Bridges"

#: src/libslic3r/PrintConfig.cpp:170
msgid "Speed for printing bridges."
msgstr "Speed for printing bridges."

#: src/libslic3r/PrintConfig.cpp:171 src/libslic3r/PrintConfig.cpp:564
#: src/libslic3r/PrintConfig.cpp:573 src/libslic3r/PrintConfig.cpp:583
#: src/libslic3r/PrintConfig.cpp:592 src/libslic3r/PrintConfig.cpp:623
#: src/libslic3r/PrintConfig.cpp:644 src/libslic3r/PrintConfig.cpp:884
#: src/libslic3r/PrintConfig.cpp:1013 src/libslic3r/PrintConfig.cpp:1090
#: src/libslic3r/PrintConfig.cpp:1110 src/libslic3r/PrintConfig.cpp:1123
#: src/libslic3r/PrintConfig.cpp:1134 src/libslic3r/PrintConfig.cpp:1189
#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1418
#: src/libslic3r/PrintConfig.cpp:1601 src/libslic3r/PrintConfig.cpp:1611
#: src/libslic3r/PrintConfig.cpp:2041 src/libslic3r/PrintConfig.cpp:2160
msgid "mm/s"
msgstr "mm/s"

#: src/libslic3r/PrintConfig.cpp:178
msgid "Brim width"
msgstr "Brim width"

#: src/libslic3r/PrintConfig.cpp:179
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."

#: src/libslic3r/PrintConfig.cpp:187
msgid "Clip multi-part objects"
msgstr "Clip multi-part objects"

#: src/libslic3r/PrintConfig.cpp:188
msgid ""
"When printing multi-material objects, this settings will make slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""
"When printing multi-material objects, this settings will make slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."

#: src/libslic3r/PrintConfig.cpp:196
msgid "Colorprint height"
msgstr "Colorprint height"

#: src/libslic3r/PrintConfig.cpp:197
msgid "Heights at which a filament change is to occur. "
msgstr "Heights at which a filament change is to occur. "

#: src/libslic3r/PrintConfig.cpp:207
msgid "Compatible printers condition"
msgstr "Compatible printers condition"

#: src/libslic3r/PrintConfig.cpp:208
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."

#: src/libslic3r/PrintConfig.cpp:220
msgid "Compatible print profiles condition"
msgstr "Compatible print profiles condition"

#: src/libslic3r/PrintConfig.cpp:221
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."

#: src/libslic3r/PrintConfig.cpp:235
msgid "Complete individual objects"
msgstr "Complete individual objects"

#: src/libslic3r/PrintConfig.cpp:236
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."

#: src/libslic3r/PrintConfig.cpp:245
msgid "Enable auto cooling"
msgstr "Enable auto cooling"

#: src/libslic3r/PrintConfig.cpp:246
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."

#: src/libslic3r/PrintConfig.cpp:252
msgid "Cooling tube position"
msgstr "Cooling tube position"

#: src/libslic3r/PrintConfig.cpp:253
msgid "Distance of the center-point of the cooling tube from the extruder tip "
msgstr ""
"Distance of the center-point of the cooling tube from the extruder tip "

#: src/libslic3r/PrintConfig.cpp:261
msgid "Cooling tube length"
msgstr "Cooling tube length"

#: src/libslic3r/PrintConfig.cpp:262
msgid "Length of the cooling tube to limit space for cooling moves inside it "
msgstr "Length of the cooling tube to limit space for cooling moves inside it "

#: src/libslic3r/PrintConfig.cpp:271
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."

#: src/libslic3r/PrintConfig.cpp:281
msgid "Default filament profile"
msgstr "Default filament profile"

#: src/libslic3r/PrintConfig.cpp:282
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."

#: src/libslic3r/PrintConfig.cpp:287
msgid "Default print profile"
msgstr "Default print profile"

#: src/libslic3r/PrintConfig.cpp:288 src/libslic3r/PrintConfig.cpp:2469
#: src/libslic3r/PrintConfig.cpp:2479
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."

#: src/libslic3r/PrintConfig.cpp:293
msgid "Disable fan for the first"
msgstr "Disable fan for the first"

#: src/libslic3r/PrintConfig.cpp:294
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."

#: src/libslic3r/PrintConfig.cpp:296 src/libslic3r/PrintConfig.cpp:952
#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:1691
#: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1935
#: src/libslic3r/PrintConfig.cpp:1985
msgid "layers"
msgstr "layers"

#: src/libslic3r/PrintConfig.cpp:304
msgid "Don't support bridges"
msgstr "Don't support bridges"

#: src/libslic3r/PrintConfig.cpp:306
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""
"Experimental option for preventing support material from being generated "
"under bridged areas."

#: src/libslic3r/PrintConfig.cpp:313
msgid "Distance between copies"
msgstr "Distance between copies"

#: src/libslic3r/PrintConfig.cpp:314
msgid "Distance used for the auto-arrange feature of the plater."
msgstr "Distance used for the auto-arrange feature of the plater."

#: src/libslic3r/PrintConfig.cpp:322
msgid "Elephant foot compensation"
msgstr "Elephant foot compensation"

#: src/libslic3r/PrintConfig.cpp:324
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."

#: src/libslic3r/PrintConfig.cpp:334
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all Slic3r settings."
msgstr ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all Slic3r settings."

#: src/libslic3r/PrintConfig.cpp:345
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode. Note that you can use placeholder variables for all "
"Slic3r settings. If you have multiple extruders, the gcode is processed in "
"extruder order."
msgstr ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode. Note that you can use placeholder variables for all "
"Slic3r settings. If you have multiple extruders, the gcode is processed in "
"extruder order."

#: src/libslic3r/PrintConfig.cpp:356
msgid "Ensure vertical shell thickness"
msgstr "Ensure vertical shell thickness"

#: src/libslic3r/PrintConfig.cpp:358
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."

#: src/libslic3r/PrintConfig.cpp:365
msgid "Top/bottom fill pattern"
msgstr "Top/bottom fill pattern"

#: src/libslic3r/PrintConfig.cpp:367
msgid ""
"Fill pattern for top/bottom infill. This only affects the external visible "
"layer, and not its adjacent solid shells."
msgstr ""
"Fill pattern for top/bottom infill. This only affects the external visible "
"layer, and not its adjacent solid shells."

#: src/libslic3r/PrintConfig.cpp:376 src/libslic3r/PrintConfig.cpp:800
#: src/libslic3r/PrintConfig.cpp:2021
msgid "Rectilinear"
msgstr "Rectilinear"

#: src/libslic3r/PrintConfig.cpp:377 src/libslic3r/PrintConfig.cpp:806
msgid "Concentric"
msgstr "Concentric"

#: src/libslic3r/PrintConfig.cpp:378 src/libslic3r/PrintConfig.cpp:810
msgid "Hilbert Curve"
msgstr "Hilbert Curve"

#: src/libslic3r/PrintConfig.cpp:379 src/libslic3r/PrintConfig.cpp:811
msgid "Archimedean Chords"
msgstr "Archimedean Chords"

#: src/libslic3r/PrintConfig.cpp:380 src/libslic3r/PrintConfig.cpp:812
msgid "Octagram Spiral"
msgstr "Octagram Spiral"

#: src/libslic3r/PrintConfig.cpp:386 src/libslic3r/PrintConfig.cpp:397
msgid "External perimeters"
msgstr "External perimeters"

#: src/libslic3r/PrintConfig.cpp:388
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."

#: src/libslic3r/PrintConfig.cpp:391 src/libslic3r/PrintConfig.cpp:841
#: src/libslic3r/PrintConfig.cpp:975 src/libslic3r/PrintConfig.cpp:1408
#: src/libslic3r/PrintConfig.cpp:1769 src/libslic3r/PrintConfig.cpp:1958
#: src/libslic3r/PrintConfig.cpp:2129
msgid "mm or % (leave 0 for default)"
msgstr "mm or % (leave 0 for default)"

#: src/libslic3r/PrintConfig.cpp:399
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."

#: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:864
#: src/libslic3r/PrintConfig.cpp:1725 src/libslic3r/PrintConfig.cpp:1780
#: src/libslic3r/PrintConfig.cpp:2006 src/libslic3r/PrintConfig.cpp:2142
msgid "mm/s or %"
msgstr "mm/s or %"

#: src/libslic3r/PrintConfig.cpp:409
msgid "External perimeters first"
msgstr "External perimeters first"

#: src/libslic3r/PrintConfig.cpp:411
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."

#: src/libslic3r/PrintConfig.cpp:418
msgid "Extra perimeters if needed"
msgstr "Extra perimeters if needed"

#: src/libslic3r/PrintConfig.cpp:420
#, no-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."

#: src/libslic3r/PrintConfig.cpp:431
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."

#: src/libslic3r/PrintConfig.cpp:444
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."

#: src/libslic3r/PrintConfig.cpp:455
msgid "Radius"
msgstr "Radius"

#: src/libslic3r/PrintConfig.cpp:456
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."

#: src/libslic3r/PrintConfig.cpp:467
msgid "Extruder Color"
msgstr "Extruder Color"

#: src/libslic3r/PrintConfig.cpp:468 src/libslic3r/PrintConfig.cpp:535
msgid "This is only used in the Slic3r interface as a visual help."
msgstr "This is only used in the Slic3r interface as a visual help."

#: src/libslic3r/PrintConfig.cpp:475
msgid "Extruder offset"
msgstr "Extruder offset"

#: src/libslic3r/PrintConfig.cpp:476
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."

#: src/libslic3r/PrintConfig.cpp:486
msgid "Extrusion axis"
msgstr "Extrusion axis"

#: src/libslic3r/PrintConfig.cpp:487
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."

#: src/libslic3r/PrintConfig.cpp:493
msgid "Extrusion multiplier"
msgstr "Extrusion multiplier"

#: src/libslic3r/PrintConfig.cpp:494
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."

#: src/libslic3r/PrintConfig.cpp:503
msgid "Default extrusion width"
msgstr "Default extrusion width"

#: src/libslic3r/PrintConfig.cpp:505
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."

#: src/libslic3r/PrintConfig.cpp:509
msgid "mm or % (leave 0 for auto)"
msgstr "mm or % (leave 0 for auto)"

#: src/libslic3r/PrintConfig.cpp:515
msgid "Keep fan always on"
msgstr "Keep fan always on"

#: src/libslic3r/PrintConfig.cpp:516
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."

#: src/libslic3r/PrintConfig.cpp:522
msgid "Enable fan if layer print time is below"
msgstr "Enable fan if layer print time is below"

#: src/libslic3r/PrintConfig.cpp:523
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."

#: src/libslic3r/PrintConfig.cpp:525 src/libslic3r/PrintConfig.cpp:1711
msgid "approximate seconds"
msgstr "approximate seconds"

#: src/libslic3r/PrintConfig.cpp:534
msgid "Color"
msgstr "Color"

#: src/libslic3r/PrintConfig.cpp:541
msgid "Filament notes"
msgstr "Filament notes"

#: src/libslic3r/PrintConfig.cpp:542
msgid "You can put your notes regarding the filament here."
msgstr "You can put your notes regarding the filament here."

#: src/libslic3r/PrintConfig.cpp:551 src/libslic3r/PrintConfig.cpp:1196
msgid "Max volumetric speed"
msgstr "Max volumetric speed"

#: src/libslic3r/PrintConfig.cpp:552
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."

#: src/libslic3r/PrintConfig.cpp:555 src/libslic3r/PrintConfig.cpp:1199
msgid "mm³/s"
msgstr "mm³/s"

#: src/libslic3r/PrintConfig.cpp:562
msgid "Loading speed"
msgstr "Loading speed"

#: src/libslic3r/PrintConfig.cpp:563
msgid "Speed used for loading the filament on the wipe tower. "
msgstr "Speed used for loading the filament on the wipe tower. "

#: src/libslic3r/PrintConfig.cpp:571
msgid "Loading speed at the start"
msgstr "Loading speed at the start"

#: src/libslic3r/PrintConfig.cpp:572
msgid "Speed used at the very beginning of loading phase. "
msgstr "Speed used at the very beginning of loading phase. "

#: src/libslic3r/PrintConfig.cpp:580
msgid "Unloading speed"
msgstr "Unloading speed"

#: src/libslic3r/PrintConfig.cpp:581
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming). "
msgstr ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming). "

#: src/libslic3r/PrintConfig.cpp:590
msgid "Unloading speed at the start"
msgstr "Unloading speed at the start"

#: src/libslic3r/PrintConfig.cpp:591
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming. "
msgstr ""
"Speed used for unloading the tip of the filament immediately after ramming. "

#: src/libslic3r/PrintConfig.cpp:599
msgid "Delay after unloading"
msgstr "Delay after unloading"

#: src/libslic3r/PrintConfig.cpp:600
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions. "
msgstr ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions. "

#: src/libslic3r/PrintConfig.cpp:610
msgid "Number of cooling moves"
msgstr "Number of cooling moves"

#: src/libslic3r/PrintConfig.cpp:611
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves "
msgstr ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves "

#: src/libslic3r/PrintConfig.cpp:620
msgid "Speed of the first cooling move"
msgstr "Speed of the first cooling move"

#: src/libslic3r/PrintConfig.cpp:621
msgid "Cooling moves are gradually accelerating beginning at this speed. "
msgstr "Cooling moves are gradually accelerating beginning at this speed. "

#: src/libslic3r/PrintConfig.cpp:629
msgid "Minimal purge on wipe tower"
msgstr "Minimal purge on wipe tower"

#: src/libslic3r/PrintConfig.cpp:630
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."

#: src/libslic3r/PrintConfig.cpp:635
msgid "mm³"
msgstr "mm³"

#: src/libslic3r/PrintConfig.cpp:641
msgid "Speed of the last cooling move"
msgstr "Speed of the last cooling move"

#: src/libslic3r/PrintConfig.cpp:642
msgid "Cooling moves are gradually accelerating towards this speed. "
msgstr "Cooling moves are gradually accelerating towards this speed. "

#: src/libslic3r/PrintConfig.cpp:650
msgid "Filament load time"
msgstr "Filament load time"

#: src/libslic3r/PrintConfig.cpp:651
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."

#: src/libslic3r/PrintConfig.cpp:659
msgid "Ramming parameters"
msgstr "Ramming parameters"

#: src/libslic3r/PrintConfig.cpp:660
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters "
msgstr ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters "

#: src/libslic3r/PrintConfig.cpp:667
msgid "Filament unload time"
msgstr "Filament unload time"

#: src/libslic3r/PrintConfig.cpp:668
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."

#: src/libslic3r/PrintConfig.cpp:677
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."

#: src/libslic3r/PrintConfig.cpp:685
msgid "Density"
msgstr "Density"

#: src/libslic3r/PrintConfig.cpp:686
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."

#: src/libslic3r/PrintConfig.cpp:689
msgid "g/cm³"
msgstr "g/cm³"

#: src/libslic3r/PrintConfig.cpp:695
msgid "Filament type"
msgstr "Filament type"

#: src/libslic3r/PrintConfig.cpp:696
msgid "The filament material type for use in custom G-codes."
msgstr "The filament material type for use in custom G-codes."

#: src/libslic3r/PrintConfig.cpp:712
msgid "Soluble material"
msgstr "Soluble material"

#: src/libslic3r/PrintConfig.cpp:713
msgid "Soluble material is most likely used for a soluble support."
msgstr "Soluble material is most likely used for a soluble support."

#: src/libslic3r/PrintConfig.cpp:719
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""
"Enter your filament cost per kg here. This is only for statistical "
"information."

#: src/libslic3r/PrintConfig.cpp:720
msgid "money/kg"
msgstr "money/kg"

#: src/libslic3r/PrintConfig.cpp:729
msgid "Fill angle"
msgstr "Fill angle"

#: src/libslic3r/PrintConfig.cpp:731
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."

#: src/libslic3r/PrintConfig.cpp:744
msgid "Fill density"
msgstr "Fill density"

#: src/libslic3r/PrintConfig.cpp:746
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr "Density of internal infill, expressed in the range 0% - 100%."

#: src/libslic3r/PrintConfig.cpp:782
msgid "Fill pattern"
msgstr "Fill pattern"

#: src/libslic3r/PrintConfig.cpp:784
msgid "Fill pattern for general low-density infill."
msgstr "Fill pattern for general low-density infill."

#: src/libslic3r/PrintConfig.cpp:801
msgid "Grid"
msgstr "Grid"

#: src/libslic3r/PrintConfig.cpp:802
msgid "Triangles"
msgstr "Triangles"

#: src/libslic3r/PrintConfig.cpp:803
msgid "Stars"
msgstr "Stars"

#: src/libslic3r/PrintConfig.cpp:804
msgid "Cubic"
msgstr "Cubic"

#: src/libslic3r/PrintConfig.cpp:805
msgid "Line"
msgstr "Line"

#: src/libslic3r/PrintConfig.cpp:807 src/libslic3r/PrintConfig.cpp:2023
msgid "Honeycomb"
msgstr "Honeycomb"

#: src/libslic3r/PrintConfig.cpp:808
msgid "3D Honeycomb"
msgstr "3D Honeycomb"

#: src/libslic3r/PrintConfig.cpp:809
msgid "Gyroid"
msgstr "Gyroid"

#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:826
#: src/libslic3r/PrintConfig.cpp:835 src/libslic3r/PrintConfig.cpp:871
msgid "First layer"
msgstr "First layer"

#: src/libslic3r/PrintConfig.cpp:817
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."

#: src/libslic3r/PrintConfig.cpp:827
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."

#: src/libslic3r/PrintConfig.cpp:837
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."

#: src/libslic3r/PrintConfig.cpp:848
msgid "First layer height"
msgstr "First layer height"

#: src/libslic3r/PrintConfig.cpp:850
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."

#: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:1003
#: src/libslic3r/PrintConfig.cpp:1884
msgid "mm or %"
msgstr "mm or %"

#: src/libslic3r/PrintConfig.cpp:860
msgid "First layer speed"
msgstr "First layer speed"

#: src/libslic3r/PrintConfig.cpp:861
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."

#: src/libslic3r/PrintConfig.cpp:872
msgid ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."
msgstr ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."

#: src/libslic3r/PrintConfig.cpp:882
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."

#: src/libslic3r/PrintConfig.cpp:890
msgid "Verbose G-code"
msgstr "Verbose G-code"

#: src/libslic3r/PrintConfig.cpp:891
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."

#: src/libslic3r/PrintConfig.cpp:899
msgid "G-code flavor"
msgstr "G-code flavor"

#: src/libslic3r/PrintConfig.cpp:900
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
"extrusion value at all."
msgstr ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
"extrusion value at all."

#: src/libslic3r/PrintConfig.cpp:924
msgid "No extrusion"
msgstr "No extrusion"

#: src/libslic3r/PrintConfig.cpp:929
msgid "High extruder current on filament swap"
msgstr "High extruder current on filament swap"

#: src/libslic3r/PrintConfig.cpp:930
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."

#: src/libslic3r/PrintConfig.cpp:939
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."

#: src/libslic3r/PrintConfig.cpp:948
msgid "Combine infill every"
msgstr "Combine infill every"

#: src/libslic3r/PrintConfig.cpp:950
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."

#: src/libslic3r/PrintConfig.cpp:954
msgid "Combine infill every n layers"
msgstr "Combine infill every n layers"

#: src/libslic3r/PrintConfig.cpp:960
msgid "Infill extruder"
msgstr "Infill extruder"

#: src/libslic3r/PrintConfig.cpp:962
msgid "The extruder to use when printing infill."
msgstr "The extruder to use when printing infill."

#: src/libslic3r/PrintConfig.cpp:971
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."

#: src/libslic3r/PrintConfig.cpp:981
msgid "Infill before perimeters"
msgstr "Infill before perimeters"

#: src/libslic3r/PrintConfig.cpp:982
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."

#: src/libslic3r/PrintConfig.cpp:988
msgid "Only infill where needed"
msgstr "Only infill where needed"

#: src/libslic3r/PrintConfig.cpp:990
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."

#: src/libslic3r/PrintConfig.cpp:998
msgid "Infill/perimeters overlap"
msgstr "Infill/perimeters overlap"

#: src/libslic3r/PrintConfig.cpp:1000
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."

#: src/libslic3r/PrintConfig.cpp:1012
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr "Speed for printing the internal fill. Set to zero for auto."

#: src/libslic3r/PrintConfig.cpp:1020
msgid "Inherits profile"
msgstr "Inherits profile"

#: src/libslic3r/PrintConfig.cpp:1021
msgid "Name of the profile, from which this profile inherits."
msgstr "Name of the profile, from which this profile inherits."

#: src/libslic3r/PrintConfig.cpp:1032
msgid "Interface shells"
msgstr "Interface shells"

#: src/libslic3r/PrintConfig.cpp:1033
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."

#: src/libslic3r/PrintConfig.cpp:1043
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."

#: src/libslic3r/PrintConfig.cpp:1054
msgid "Supports remaining times"
msgstr "Supports remaining times"

#: src/libslic3r/PrintConfig.cpp:1055
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."

#: src/libslic3r/PrintConfig.cpp:1063
msgid "Supports silent mode"
msgstr "Supports silent mode"

#: src/libslic3r/PrintConfig.cpp:1064
msgid "Set silent mode for the G-code flavor"
msgstr "Set silent mode for the G-code flavor"

#: src/libslic3r/PrintConfig.cpp:1087
msgid "Maximum feedrate %1%"
msgstr "Maximum feedrate %1%"

#: src/libslic3r/PrintConfig.cpp:1089
msgid "Maximum feedrate of the %1% axis"
msgstr "Maximum feedrate of the %1% axis"

#: src/libslic3r/PrintConfig.cpp:1097
msgid "Maximum acceleration %1%"
msgstr "Maximum acceleration %1%"

#: src/libslic3r/PrintConfig.cpp:1099
msgid "Maximum acceleration of the %1% axis"
msgstr "Maximum acceleration of the %1% axis"

#: src/libslic3r/PrintConfig.cpp:1107
msgid "Maximum jerk %1%"
msgstr "Maximum jerk %1%"

#: src/libslic3r/PrintConfig.cpp:1109
msgid "Maximum jerk of the %1% axis"
msgstr "Maximum jerk of the %1% axis"

#: src/libslic3r/PrintConfig.cpp:1120 src/libslic3r/PrintConfig.cpp:1122
msgid "Minimum feedrate when extruding"
msgstr "Minimum feedrate when extruding"

#: src/libslic3r/PrintConfig.cpp:1131 src/libslic3r/PrintConfig.cpp:1133
msgid "Minimum travel feedrate"
msgstr "Minimum travel feedrate"

#: src/libslic3r/PrintConfig.cpp:1142 src/libslic3r/PrintConfig.cpp:1144
msgid "Maximum acceleration when extruding"
msgstr "Maximum acceleration when extruding"

#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:1155
msgid "Maximum acceleration when retracting"
msgstr "Maximum acceleration when retracting"

#: src/libslic3r/PrintConfig.cpp:1163 src/libslic3r/PrintConfig.cpp:1173
msgid "Max"
msgstr "Max"

#: src/libslic3r/PrintConfig.cpp:1164
msgid "This setting represents the maximum speed of your fan."
msgstr "This setting represents the maximum speed of your fan."

#: src/libslic3r/PrintConfig.cpp:1174
#, no-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."

#: src/libslic3r/PrintConfig.cpp:1185
msgid "Max print speed"
msgstr "Max print speed"

#: src/libslic3r/PrintConfig.cpp:1186
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."

#: src/libslic3r/PrintConfig.cpp:1197
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."

#: src/libslic3r/PrintConfig.cpp:1206
msgid "Max volumetric slope positive"
msgstr "Max volumetric slope positive"

#: src/libslic3r/PrintConfig.cpp:1207 src/libslic3r/PrintConfig.cpp:1219
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."

#: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1223
msgid "mm³/s²"
msgstr "mm³/s²"

#: src/libslic3r/PrintConfig.cpp:1218
msgid "Max volumetric slope negative"
msgstr "Max volumetric slope negative"

#: src/libslic3r/PrintConfig.cpp:1230 src/libslic3r/PrintConfig.cpp:1240
msgid "Min"
msgstr "Min"

#: src/libslic3r/PrintConfig.cpp:1231
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr "This setting represents the minimum PWM your fan needs to work."

#: src/libslic3r/PrintConfig.cpp:1241
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."

#: src/libslic3r/PrintConfig.cpp:1250
msgid "Min print speed"
msgstr "Min print speed"

#: src/libslic3r/PrintConfig.cpp:1251
msgid "Slic3r will not scale speed down below this speed."
msgstr "Slic3r will not scale speed down below this speed."

#: src/libslic3r/PrintConfig.cpp:1259
msgid "Minimal filament extrusion length"
msgstr "Minimal filament extrusion length"

#: src/libslic3r/PrintConfig.cpp:1260
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."

#: src/libslic3r/PrintConfig.cpp:1270
msgid "Configuration notes"
msgstr "Configuration notes"

#: src/libslic3r/PrintConfig.cpp:1271
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."

#: src/libslic3r/PrintConfig.cpp:1281
msgid "Nozzle diameter"
msgstr "Nozzle diameter"

#: src/libslic3r/PrintConfig.cpp:1282
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"

#: src/libslic3r/PrintConfig.cpp:1288
msgid "Host Type"
msgstr "Host Type"

#: src/libslic3r/PrintConfig.cpp:1289
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."

#: src/libslic3r/PrintConfig.cpp:1301
msgid "API Key / Password"
msgstr "API Key / Password"

#: src/libslic3r/PrintConfig.cpp:1302
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."

#: src/libslic3r/PrintConfig.cpp:1317
msgid "Hostname, IP or URL"
msgstr "Hostname, IP or URL"

#: src/libslic3r/PrintConfig.cpp:1318
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."

#: src/libslic3r/PrintConfig.cpp:1325
msgid "Only retract when crossing perimeters"
msgstr "Only retract when crossing perimeters"

#: src/libslic3r/PrintConfig.cpp:1326
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."

#: src/libslic3r/PrintConfig.cpp:1334
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."

#: src/libslic3r/PrintConfig.cpp:1342
msgid "Output filename format"
msgstr "Output filename format"

#: src/libslic3r/PrintConfig.cpp:1343
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."

#: src/libslic3r/PrintConfig.cpp:1353
msgid "Detect bridging perimeters"
msgstr "Detect bridging perimeters"

#: src/libslic3r/PrintConfig.cpp:1355
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."

#: src/libslic3r/PrintConfig.cpp:1362
msgid "Filament parking position"
msgstr "Filament parking position"

#: src/libslic3r/PrintConfig.cpp:1363
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware. "
msgstr ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware. "

#: src/libslic3r/PrintConfig.cpp:1372
msgid "Extra loading distance"
msgstr "Extra loading distance"

#: src/libslic3r/PrintConfig.cpp:1373
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading. "
msgstr ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading. "

#: src/libslic3r/PrintConfig.cpp:1382 src/libslic3r/PrintConfig.cpp:1402
#: src/libslic3r/PrintConfig.cpp:1415 src/libslic3r/PrintConfig.cpp:1425
msgid "Perimeters"
msgstr "Perimeters"

#: src/libslic3r/PrintConfig.cpp:1383
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."

#: src/libslic3r/PrintConfig.cpp:1392
msgid "Perimeter extruder"
msgstr "Perimeter extruder"

#: src/libslic3r/PrintConfig.cpp:1394
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""
"The extruder to use when printing perimeters and brim. First extruder is 1."

#: src/libslic3r/PrintConfig.cpp:1404
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."

#: src/libslic3r/PrintConfig.cpp:1417
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."

#: src/libslic3r/PrintConfig.cpp:1427
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."

#: src/libslic3r/PrintConfig.cpp:1431
msgid "(minimum)"
msgstr "(minimum)"

#: src/libslic3r/PrintConfig.cpp:1439
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."

#: src/libslic3r/PrintConfig.cpp:1452
msgid "Printer type"
msgstr "Printer type"

#: src/libslic3r/PrintConfig.cpp:1453
msgid "Type of the printer."
msgstr "Type of the printer."

#: src/libslic3r/PrintConfig.cpp:1457
msgid "Printer notes"
msgstr "Printer notes"

#: src/libslic3r/PrintConfig.cpp:1458
msgid "You can put your notes regarding the printer here."
msgstr "You can put your notes regarding the printer here."

#: src/libslic3r/PrintConfig.cpp:1467
msgid "Printer vendor"
msgstr "Printer vendor"

#: src/libslic3r/PrintConfig.cpp:1468
msgid "Name of the printer vendor."
msgstr "Name of the printer vendor."

#: src/libslic3r/PrintConfig.cpp:1472
msgid "Printer variant"
msgstr "Printer variant"

#: src/libslic3r/PrintConfig.cpp:1473
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."

#: src/libslic3r/PrintConfig.cpp:1483
msgid "Raft layers"
msgstr "Raft layers"

#: src/libslic3r/PrintConfig.cpp:1485
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."

#: src/libslic3r/PrintConfig.cpp:1494
msgid "Resolution"
msgstr "Resolution"

#: src/libslic3r/PrintConfig.cpp:1495
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."

#: src/libslic3r/PrintConfig.cpp:1506
msgid "Minimum travel after retraction"
msgstr "Minimum travel after retraction"

#: src/libslic3r/PrintConfig.cpp:1507
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""
"Retraction is not triggered when travel moves are shorter than this length."

#: src/libslic3r/PrintConfig.cpp:1514
msgid "Retract amount before wipe"
msgstr "Retract amount before wipe"

#: src/libslic3r/PrintConfig.cpp:1515
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."

#: src/libslic3r/PrintConfig.cpp:1523
msgid "Retract on layer change"
msgstr "Retract on layer change"

#: src/libslic3r/PrintConfig.cpp:1524
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr "This flag enforces a retraction whenever a Z move is done."

#: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:1539
msgid "Length"
msgstr "Length"

#: src/libslic3r/PrintConfig.cpp:1531
msgid "Retraction Length"
msgstr "Retraction Length"

#: src/libslic3r/PrintConfig.cpp:1532
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."

#: src/libslic3r/PrintConfig.cpp:1534 src/libslic3r/PrintConfig.cpp:1544
msgid "mm (zero to disable)"
msgstr "mm (zero to disable)"

#: src/libslic3r/PrintConfig.cpp:1540
msgid "Retraction Length (Toolchange)"
msgstr "Retraction Length (Toolchange)"

#: src/libslic3r/PrintConfig.cpp:1541
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."

#: src/libslic3r/PrintConfig.cpp:1550
msgid "Lift Z"
msgstr "Lift Z"

#: src/libslic3r/PrintConfig.cpp:1551
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."

#: src/libslic3r/PrintConfig.cpp:1559
msgid "Above Z"
msgstr "Above Z"

#: src/libslic3r/PrintConfig.cpp:1560
msgid "Only lift Z above"
msgstr "Only lift Z above"

#: src/libslic3r/PrintConfig.cpp:1561
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."

#: src/libslic3r/PrintConfig.cpp:1569
msgid "Below Z"
msgstr "Below Z"

#: src/libslic3r/PrintConfig.cpp:1570
msgid "Only lift Z below"
msgstr "Only lift Z below"

#: src/libslic3r/PrintConfig.cpp:1571
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."

#: src/libslic3r/PrintConfig.cpp:1580 src/libslic3r/PrintConfig.cpp:1589
msgid "Extra length on restart"
msgstr "Extra length on restart"

#: src/libslic3r/PrintConfig.cpp:1581
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."

#: src/libslic3r/PrintConfig.cpp:1590
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."

#: src/libslic3r/PrintConfig.cpp:1598 src/libslic3r/PrintConfig.cpp:1599
msgid "Retraction Speed"
msgstr "Retraction Speed"

#: src/libslic3r/PrintConfig.cpp:1600
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "The speed for retractions (it only applies to the extruder motor)."

#: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1608
msgid "Deretraction Speed"
msgstr "Deretraction Speed"

#: src/libslic3r/PrintConfig.cpp:1609
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."

#: src/libslic3r/PrintConfig.cpp:1617
msgid "Seam position"
msgstr "Seam position"

#: src/libslic3r/PrintConfig.cpp:1619
msgid "Position of perimeters starting points."
msgstr "Position of perimeters starting points."

#: src/libslic3r/PrintConfig.cpp:1626
msgid "Random"
msgstr "Random"

#: src/libslic3r/PrintConfig.cpp:1627
msgid "Nearest"
msgstr "Nearest"

#: src/libslic3r/PrintConfig.cpp:1628
msgid "Aligned"
msgstr "Aligned"

#: src/libslic3r/PrintConfig.cpp:1629
msgid "Rear"
msgstr "Rear"

#: src/libslic3r/PrintConfig.cpp:1636
msgid "Direction"
msgstr "Direction"

#: src/libslic3r/PrintConfig.cpp:1638
msgid "Preferred direction of the seam"
msgstr "Preferred direction of the seam"

#: src/libslic3r/PrintConfig.cpp:1639
msgid "Seam preferred direction"
msgstr "Seam preferred direction"

#: src/libslic3r/PrintConfig.cpp:1647
msgid "Jitter"
msgstr "Jitter"

#: src/libslic3r/PrintConfig.cpp:1649
msgid "Seam preferred direction jitter"
msgstr "Seam preferred direction jitter"

#: src/libslic3r/PrintConfig.cpp:1650
msgid "Preferred direction of the seam - jitter"
msgstr "Preferred direction of the seam - jitter"

#: src/libslic3r/PrintConfig.cpp:1661
msgid "USB/serial port for printer connection."
msgstr "USB/serial port for printer connection."

#: src/libslic3r/PrintConfig.cpp:1669
msgid "Serial port speed"
msgstr "Serial port speed"

#: src/libslic3r/PrintConfig.cpp:1670
msgid "Speed (baud) of USB/serial port for printer connection."
msgstr "Speed (baud) of USB/serial port for printer connection."

#: src/libslic3r/PrintConfig.cpp:1679
msgid "Distance from object"
msgstr "Distance from object"

#: src/libslic3r/PrintConfig.cpp:1680
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."

#: src/libslic3r/PrintConfig.cpp:1688
msgid "Skirt height"
msgstr "Skirt height"

#: src/libslic3r/PrintConfig.cpp:1689
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."

#: src/libslic3r/PrintConfig.cpp:1697
msgid "Loops (minimum)"
msgstr "Loops (minimum)"

#: src/libslic3r/PrintConfig.cpp:1698
msgid "Skirt Loops"
msgstr "Skirt Loops"

#: src/libslic3r/PrintConfig.cpp:1699
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."

#: src/libslic3r/PrintConfig.cpp:1708
msgid "Slow down if layer print time is below"
msgstr "Slow down if layer print time is below"

#: src/libslic3r/PrintConfig.cpp:1709
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."

#: src/libslic3r/PrintConfig.cpp:1720
msgid "Small perimeters"
msgstr "Small perimeters"

#: src/libslic3r/PrintConfig.cpp:1722
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."

#: src/libslic3r/PrintConfig.cpp:1732
msgid "Solid infill threshold area"
msgstr "Solid infill threshold area"

#: src/libslic3r/PrintConfig.cpp:1734
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."

#: src/libslic3r/PrintConfig.cpp:1735
msgid "mm²"
msgstr "mm²"

#: src/libslic3r/PrintConfig.cpp:1742
msgid "Solid infill extruder"
msgstr "Solid infill extruder"

#: src/libslic3r/PrintConfig.cpp:1744
msgid "The extruder to use when printing solid infill."
msgstr "The extruder to use when printing solid infill."

#: src/libslic3r/PrintConfig.cpp:1751
msgid "Solid infill every"
msgstr "Solid infill every"

#: src/libslic3r/PrintConfig.cpp:1753
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."

#: src/libslic3r/PrintConfig.cpp:1766
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."

#: src/libslic3r/PrintConfig.cpp:1777
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."

#: src/libslic3r/PrintConfig.cpp:1789
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "Number of solid layers to generate on top and bottom surfaces."

#: src/libslic3r/PrintConfig.cpp:1796
msgid "Spiral vase"
msgstr "Spiral vase"

#: src/libslic3r/PrintConfig.cpp:1797
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."

#: src/libslic3r/PrintConfig.cpp:1806
msgid "Temperature variation"
msgstr "Temperature variation"

#: src/libslic3r/PrintConfig.cpp:1807
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."

#: src/libslic3r/PrintConfig.cpp:1818
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
"such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all Slic3r settings, so you can put a "
"\"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
"such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all Slic3r settings, so you can put a "
"\"M109 S[first_layer_temperature]\" command wherever you want."

#: src/libslic3r/PrintConfig.cpp:1834
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode. This is used to override settings for a specific filament. If Slic3r "
"detects M104, M109, M140 or M190 in your custom codes, such commands will "
"not be prepended automatically so you're free to customize the order of "
"heating commands and other custom actions. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode. This is used to override settings for a specific filament. If Slic3r "
"detects M104, M109, M140 or M190 in your custom codes, such commands will "
"not be prepended automatically so you're free to customize the order of "
"heating commands and other custom actions. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."

#: src/libslic3r/PrintConfig.cpp:1850
msgid "Single Extruder Multi Material"
msgstr "Single Extruder Multi Material"

#: src/libslic3r/PrintConfig.cpp:1851
msgid "The printer multiplexes filaments into a single hot end."
msgstr "The printer multiplexes filaments into a single hot end."

#: src/libslic3r/PrintConfig.cpp:1857
msgid "Prime all printing extruders"
msgstr "Prime all printing extruders"

#: src/libslic3r/PrintConfig.cpp:1858
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."

#: src/libslic3r/PrintConfig.cpp:1864
msgid "Generate support material"
msgstr "Generate support material"

#: src/libslic3r/PrintConfig.cpp:1866
msgid "Enable support material generation."
msgstr "Enable support material generation."

#: src/libslic3r/PrintConfig.cpp:1871
msgid "Auto generated supports"
msgstr "Auto generated supports"

#: src/libslic3r/PrintConfig.cpp:1873
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."

#: src/libslic3r/PrintConfig.cpp:1880
msgid "XY separation between an object and its support"
msgstr "XY separation between an object and its support"

#: src/libslic3r/PrintConfig.cpp:1882
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."

#: src/libslic3r/PrintConfig.cpp:1893
msgid "Pattern angle"
msgstr "Pattern angle"

#: src/libslic3r/PrintConfig.cpp:1895
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."

#: src/libslic3r/PrintConfig.cpp:1906
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."

#: src/libslic3r/PrintConfig.cpp:1913
msgid "Contact Z distance"
msgstr "Contact Z distance"

#: src/libslic3r/PrintConfig.cpp:1915
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."

#: src/libslic3r/PrintConfig.cpp:1923
msgid "soluble"
msgstr "soluble"

#: src/libslic3r/PrintConfig.cpp:1924
msgid "detachable"
msgstr "detachable"

#: src/libslic3r/PrintConfig.cpp:1929
msgid "Enforce support for the first"
msgstr "Enforce support for the first"

#: src/libslic3r/PrintConfig.cpp:1931
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."

#: src/libslic3r/PrintConfig.cpp:1937
msgid "Enforce support for the first n layers"
msgstr "Enforce support for the first n layers"

#: src/libslic3r/PrintConfig.cpp:1943
msgid "Support material/raft/skirt extruder"
msgstr "Support material/raft/skirt extruder"

#: src/libslic3r/PrintConfig.cpp:1945
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."

#: src/libslic3r/PrintConfig.cpp:1955
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."

#: src/libslic3r/PrintConfig.cpp:1964
msgid "Interface loops"
msgstr "Interface loops"

#: src/libslic3r/PrintConfig.cpp:1966
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""
"Cover the top contact layer of the supports with loops. Disabled by default."

#: src/libslic3r/PrintConfig.cpp:1972
msgid "Support material/raft interface extruder"
msgstr "Support material/raft interface extruder"

#: src/libslic3r/PrintConfig.cpp:1974
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."

#: src/libslic3r/PrintConfig.cpp:1982
msgid "Interface layers"
msgstr "Interface layers"

#: src/libslic3r/PrintConfig.cpp:1984
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""
"Number of interface layers to insert between the object(s) and support "
"material."

#: src/libslic3r/PrintConfig.cpp:1992
msgid "Interface pattern spacing"
msgstr "Interface pattern spacing"

#: src/libslic3r/PrintConfig.cpp:1994
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr "Spacing between interface lines. Set zero to get a solid interface."

#: src/libslic3r/PrintConfig.cpp:2004
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."

#: src/libslic3r/PrintConfig.cpp:2013
msgid "Pattern"
msgstr "Pattern"

#: src/libslic3r/PrintConfig.cpp:2015
msgid "Pattern used to generate support material."
msgstr "Pattern used to generate support material."

#: src/libslic3r/PrintConfig.cpp:2022
msgid "Rectilinear grid"
msgstr "Rectilinear grid"

#: src/libslic3r/PrintConfig.cpp:2028
msgid "Pattern spacing"
msgstr "Pattern spacing"

#: src/libslic3r/PrintConfig.cpp:2030
msgid "Spacing between support material lines."
msgstr "Spacing between support material lines."

#: src/libslic3r/PrintConfig.cpp:2040
msgid "Speed for printing support material."
msgstr "Speed for printing support material."

#: src/libslic3r/PrintConfig.cpp:2047
msgid "Synchronize with object layers"
msgstr "Synchronize with object layers"

#: src/libslic3r/PrintConfig.cpp:2049
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."

#: src/libslic3r/PrintConfig.cpp:2056
msgid "Overhang threshold"
msgstr "Overhang threshold"

#: src/libslic3r/PrintConfig.cpp:2058
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."

#: src/libslic3r/PrintConfig.cpp:2071
msgid "With sheath around the support"
msgstr "With sheath around the support"

#: src/libslic3r/PrintConfig.cpp:2073
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."

#: src/libslic3r/PrintConfig.cpp:2081
msgid ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."
msgstr ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."

#: src/libslic3r/PrintConfig.cpp:2084
msgid "Temperature"
msgstr "Temperature"

#: src/libslic3r/PrintConfig.cpp:2090
msgid "Detect thin walls"
msgstr "Detect thin walls"

#: src/libslic3r/PrintConfig.cpp:2092
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."

#: src/libslic3r/PrintConfig.cpp:2099
msgid "Threads"
msgstr "Threads"

#: src/libslic3r/PrintConfig.cpp:2100
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."

#: src/libslic3r/PrintConfig.cpp:2112
msgid ""
"This custom code is inserted right before every extruder change. Note that "
"you can use placeholder variables for all Slic3r settings as well as "
"[previous_extruder] and [next_extruder]."
msgstr ""
"This custom code is inserted right before every extruder change. Note that "
"you can use placeholder variables for all Slic3r settings as well as "
"[previous_extruder] and [next_extruder]."

#: src/libslic3r/PrintConfig.cpp:2125
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."

#: src/libslic3r/PrintConfig.cpp:2137
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."

#: src/libslic3r/PrintConfig.cpp:2149
msgctxt "Layers"
msgid "Top"
msgstr "Top"

#: src/libslic3r/PrintConfig.cpp:2151
msgid "Number of solid layers to generate on top surfaces."
msgstr "Number of solid layers to generate on top surfaces."

#: src/libslic3r/PrintConfig.cpp:2153
msgid "Top solid layers"
msgstr "Top solid layers"

#: src/libslic3r/PrintConfig.cpp:2159
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "Speed for travel moves (jumps between distant extrusion points)."

#: src/libslic3r/PrintConfig.cpp:2168
msgid "Use firmware retraction"
msgstr "Use firmware retraction"

#: src/libslic3r/PrintConfig.cpp:2169
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."

#: src/libslic3r/PrintConfig.cpp:2176
msgid "Use relative E distances"
msgstr "Use relative E distances"

#: src/libslic3r/PrintConfig.cpp:2177
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."

#: src/libslic3r/PrintConfig.cpp:2184
msgid "Use volumetric E"
msgstr "Use volumetric E"

#: src/libslic3r/PrintConfig.cpp:2185
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."

#: src/libslic3r/PrintConfig.cpp:2196
msgid "Enable variable layer height feature"
msgstr "Enable variable layer height feature"

#: src/libslic3r/PrintConfig.cpp:2197
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."

#: src/libslic3r/PrintConfig.cpp:2204
msgid "Wipe while retracting"
msgstr "Wipe while retracting"

#: src/libslic3r/PrintConfig.cpp:2205
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."

#: src/libslic3r/PrintConfig.cpp:2213
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."

#: src/libslic3r/PrintConfig.cpp:2220
msgid "Purging volumes - load/unload volumes"
msgstr "Purging volumes - load/unload volumes"

#: src/libslic3r/PrintConfig.cpp:2221
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below. "
msgstr ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below. "

#: src/libslic3r/PrintConfig.cpp:2228
msgid "Purging volumes - matrix"
msgstr "Purging volumes - matrix"

#: src/libslic3r/PrintConfig.cpp:2229
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools. "
msgstr ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools. "

#: src/libslic3r/PrintConfig.cpp:2239
msgid "Position X"
msgstr "Position X"

#: src/libslic3r/PrintConfig.cpp:2240
msgid "X coordinate of the left front corner of a wipe tower"
msgstr "X coordinate of the left front corner of a wipe tower"

#: src/libslic3r/PrintConfig.cpp:2247
msgid "Position Y"
msgstr "Position Y"

#: src/libslic3r/PrintConfig.cpp:2248
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr "Y coordinate of the left front corner of a wipe tower"

#: src/libslic3r/PrintConfig.cpp:2256
msgid "Width of a wipe tower"
msgstr "Width of a wipe tower"

#: src/libslic3r/PrintConfig.cpp:2263
msgid "Wipe tower rotation angle"
msgstr "Wipe tower rotation angle"

#: src/libslic3r/PrintConfig.cpp:2264
msgid "Wipe tower rotation angle with respect to x-axis "
msgstr "Wipe tower rotation angle with respect to x-axis "

#: src/libslic3r/PrintConfig.cpp:2265
msgid "degrees"
msgstr "degrees"

#: src/libslic3r/PrintConfig.cpp:2272
msgid "Wipe into this object's infill"
msgstr "Wipe into this object's infill"

#: src/libslic3r/PrintConfig.cpp:2273
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."

#: src/libslic3r/PrintConfig.cpp:2281
msgid "Wipe into this object"
msgstr "Wipe into this object"

#: src/libslic3r/PrintConfig.cpp:2282
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."

#: src/libslic3r/PrintConfig.cpp:2289
msgid "Maximal bridging distance"
msgstr "Maximal bridging distance"

#: src/libslic3r/PrintConfig.cpp:2290
msgid "Maximal distance between supports on sparse infill sections. "
msgstr "Maximal distance between supports on sparse infill sections. "

#: src/libslic3r/PrintConfig.cpp:2297
msgid "XY Size Compensation"
msgstr "XY Size Compensation"

#: src/libslic3r/PrintConfig.cpp:2299
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."

#: src/libslic3r/PrintConfig.cpp:2308
msgid "Z offset"
msgstr "Z offset"

#: src/libslic3r/PrintConfig.cpp:2309
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."

#: src/libslic3r/PrintConfig.cpp:2319
msgid "Bed size X"
msgstr "Bed size X"

#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2327
#: src/libslic3r/PrintConfig.cpp:2334 src/libslic3r/PrintConfig.cpp:2343
#: src/libslic3r/PrintConfig.cpp:2351 src/libslic3r/PrintConfig.cpp:2359
msgid "Dwarf"
msgstr "Dwarf"

#: src/libslic3r/PrintConfig.cpp:2326
msgid "Bed size Y"
msgstr "Bed size Y"

#: src/libslic3r/PrintConfig.cpp:2333
msgid "Picture resolution X"
msgstr "Picture resolution X"

#: src/libslic3r/PrintConfig.cpp:2335 src/libslic3r/PrintConfig.cpp:2344
msgid "px"
msgstr "px"

#: src/libslic3r/PrintConfig.cpp:2342
msgid "Picture resolution Y"
msgstr "Picture resolution Y"

#: src/libslic3r/PrintConfig.cpp:2350 src/libslic3r/PrintConfig.cpp:2430
#: src/libslic3r/PrintConfig.cpp:2431
msgid "Exposure time"
msgstr "Exposure time"

#: src/libslic3r/PrintConfig.cpp:2358
msgid "Exposure time first layers"
msgstr "Exposure time first layers"

#: src/libslic3r/PrintConfig.cpp:2373
msgid "Display width"
msgstr "Display width"

#: src/libslic3r/PrintConfig.cpp:2374
msgid "Width of the display"
msgstr "Width of the display"

#: src/libslic3r/PrintConfig.cpp:2380
msgid "Display height"
msgstr "Display height"

#: src/libslic3r/PrintConfig.cpp:2381
msgid "Height of the display"
msgstr "Height of the display"

#: src/libslic3r/PrintConfig.cpp:2387
msgid "Number of pixels in"
msgstr "Number of pixels in"

#: src/libslic3r/PrintConfig.cpp:2389
msgid "Number of pixels in X"
msgstr "Number of pixels in X"

#: src/libslic3r/PrintConfig.cpp:2396
msgid "Number of pixels in Y"
msgstr "Number of pixels in Y"

#: src/libslic3r/PrintConfig.cpp:2402
msgid "Display orientation"
msgstr "Display orientation"

#: src/libslic3r/PrintConfig.cpp:2403
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."

#: src/libslic3r/PrintConfig.cpp:2410
msgid "Landscape"
msgstr "Landscape"

#: src/libslic3r/PrintConfig.cpp:2411
msgid "Portrait"
msgstr "Portrait"

#: src/libslic3r/PrintConfig.cpp:2415 src/libslic3r/PrintConfig.cpp:2416
msgid "Printer scaling correction"
msgstr "Printer scaling correction"

#: src/libslic3r/PrintConfig.cpp:2422 src/libslic3r/PrintConfig.cpp:2423
msgid "Initial layer height"
msgstr "Initial layer height"

#: src/libslic3r/PrintConfig.cpp:2438 src/libslic3r/PrintConfig.cpp:2439
msgid "Initial exposure time"
msgstr "Initial exposure time"

#: src/libslic3r/PrintConfig.cpp:2446 src/libslic3r/PrintConfig.cpp:2447
msgid "Correction for expansion when printing"
msgstr "Correction for expansion when printing"

#: src/libslic3r/PrintConfig.cpp:2452 src/libslic3r/PrintConfig.cpp:2453
msgid "Correction for expansion after curing"
msgstr "Correction for expansion after curing"

#: src/libslic3r/PrintConfig.cpp:2458
msgid "SLA print material notes"
msgstr "SLA print material notes"

#: src/libslic3r/PrintConfig.cpp:2459
msgid "You can put your notes regarding the SLA print material here."
msgstr "You can put your notes regarding the SLA print material here."

#: src/libslic3r/PrintConfig.cpp:2468 src/libslic3r/PrintConfig.cpp:2478
msgid "Default SLA material profile"
msgstr "Default SLA material profile"

#: src/libslic3r/PrintConfig.cpp:2487
msgid "Generate supports"
msgstr "Generate supports"

#: src/libslic3r/PrintConfig.cpp:2489
msgid "Generate supports for the models"
msgstr "Generate supports for the models"

#: src/libslic3r/PrintConfig.cpp:2494
msgid "Support head front diameter"
msgstr "Support head front diameter"

#: src/libslic3r/PrintConfig.cpp:2496
msgid "Diameter of the pointing side of the head"
msgstr "Diameter of the pointing side of the head"

#: src/libslic3r/PrintConfig.cpp:2503
msgid "Support head penetration"
msgstr "Support head penetration"

#: src/libslic3r/PrintConfig.cpp:2505
msgid "How much the pinhead has to penetrate the model surface"
msgstr "How much the pinhead has to penetrate the model surface"

#: src/libslic3r/PrintConfig.cpp:2512
msgid "Support head width"
msgstr "Support head width"

#: src/libslic3r/PrintConfig.cpp:2514
msgid "Width from the back sphere center to the front sphere center"
msgstr "Width from the back sphere center to the front sphere center"

#: src/libslic3r/PrintConfig.cpp:2521
msgid "Support pillar diameter"
msgstr "Support pillar diameter"

#: src/libslic3r/PrintConfig.cpp:2523
msgid "Diameter in mm of the support pillars"
msgstr "Diameter in mm of the support pillars"

#: src/libslic3r/PrintConfig.cpp:2530
msgid "Support pillar connection mode"
msgstr "Support pillar connection mode"

#: src/libslic3r/PrintConfig.cpp:2531
msgid ""
"Controls the bridge type between two neigboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""
"Controls the bridge type between two neigboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."

#: src/libslic3r/PrintConfig.cpp:2540
msgid "Zig-Zag"
msgstr "Zig-Zag"

#: src/libslic3r/PrintConfig.cpp:2541
msgid "Cross"
msgstr "Cross"

#: src/libslic3r/PrintConfig.cpp:2542
msgid "Dynamic"
msgstr "Dynamic"

#: src/libslic3r/PrintConfig.cpp:2546
msgid "Pillar widening factor"
msgstr "Pillar widening factor"

#: src/libslic3r/PrintConfig.cpp:2548
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."

#: src/libslic3r/PrintConfig.cpp:2557
msgid "Support base diameter"
msgstr "Support base diameter"

#: src/libslic3r/PrintConfig.cpp:2559
msgid "Diameter in mm of the pillar base"
msgstr "Diameter in mm of the pillar base"

#: src/libslic3r/PrintConfig.cpp:2566
msgid "Support base height"
msgstr "Support base height"

#: src/libslic3r/PrintConfig.cpp:2568
msgid "The height of the pillar base cone"
msgstr "The height of the pillar base cone"

#: src/libslic3r/PrintConfig.cpp:2575
msgid "Critical angle"
msgstr "Critical angle"

#: src/libslic3r/PrintConfig.cpp:2577
msgid "The default angle for connecting support sticks and junctions."
msgstr "The default angle for connecting support sticks and junctions."

#: src/libslic3r/PrintConfig.cpp:2584
msgid "Max bridge length"
msgstr "Max bridge length"

#: src/libslic3r/PrintConfig.cpp:2586
msgid "The max length of a bridge"
msgstr "The max length of a bridge"

#: src/libslic3r/PrintConfig.cpp:2593
msgid "Object elevation"
msgstr "Object elevation"

#: src/libslic3r/PrintConfig.cpp:2595
msgid "How much the supports should lift up the supported object."
msgstr "How much the supports should lift up the supported object."

#: src/libslic3r/PrintConfig.cpp:2602
msgid "Density on horizontal surfaces"
msgstr "Density on horizontal surfaces"

#: src/libslic3r/PrintConfig.cpp:2604
msgid ""
"How many support points (approximately) should be placed on horizontal "
"surface."
msgstr ""
"How many support points (approximately) should be placed on horizontal "
"surface."

#: src/libslic3r/PrintConfig.cpp:2605 src/libslic3r/PrintConfig.cpp:2614
msgid "points per square dm"
msgstr "points per square dm"

#: src/libslic3r/PrintConfig.cpp:2611
msgid "Density on surfaces at 45 degrees"
msgstr "Density on surfaces at 45 degrees"

#: src/libslic3r/PrintConfig.cpp:2613
msgid ""
"How many support points (approximately) should be placed on surface sloping "
"at 45 degrees."
msgstr ""
"How many support points (approximately) should be placed on surface sloping "
"at 45 degrees."

#: src/libslic3r/PrintConfig.cpp:2620
msgid "Minimal support point height"
msgstr "Minimal support point height"

#: src/libslic3r/PrintConfig.cpp:2622
msgid "No support points will be placed lower than this value from the bottom."
msgstr ""
"No support points will be placed lower than this value from the bottom."

#: src/libslic3r/PrintConfig.cpp:2629
msgid "Use pad"
msgstr "Use pad"

#: src/libslic3r/PrintConfig.cpp:2631
msgid "Add a pad underneath the supported model"
msgstr "Add a pad underneath the supported model"

#: src/libslic3r/PrintConfig.cpp:2636
msgid "Pad wall thickness"
msgstr "Pad wall thickness"

#: src/libslic3r/PrintConfig.cpp:2645
msgid "Pad wall height"
msgstr "Pad wall height"

#: src/libslic3r/PrintConfig.cpp:2654
msgid "Max merge distance"
msgstr "Max merge distance"

#: src/libslic3r/PrintConfig.cpp:2663
msgid "Pad edge radius"
msgstr "Pad edge radius"

#: src/libslic3r/PrintConfig.cpp:3017
msgid "Cut model at the given Z."
msgstr "Cut model at the given Z."

#: src/libslic3r/PrintConfig.cpp:3022
msgid "Dont arrange"
msgstr "Dont arrange"

#: src/libslic3r/PrintConfig.cpp:3023
msgid ""
"Don't arrange the objects on the build plate. The model coordinates define "
"the absolute positions on the build plate. The option --center will be "
"ignored."
msgstr ""
"Don't arrange the objects on the build plate. The model coordinates define "
"the absolute positions on the build plate. The option --center will be "
"ignored."

#: src/libslic3r/PrintConfig.cpp:3030
msgid "User data directory"
msgstr "User data directory"

#: src/libslic3r/PrintConfig.cpp:3031
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."

#: src/libslic3r/PrintConfig.cpp:3038
msgid "Export 3MF"
msgstr "Export 3MF"

#: src/libslic3r/PrintConfig.cpp:3039
msgid "Slice the model and export slices as 3MF."
msgstr "Slice the model and export slices as 3MF."

#: src/libslic3r/PrintConfig.cpp:3044
msgid "Slice"
msgstr "Slice"

#: src/libslic3r/PrintConfig.cpp:3045
msgid "Slice the model and export gcode."
msgstr "Slice the model and export gcode."

#: src/libslic3r/PrintConfig.cpp:3050
msgid "Help"
msgstr "Help"

#: src/libslic3r/PrintConfig.cpp:3051
msgid "Show this help."
msgstr "Show this help."

#: src/libslic3r/PrintConfig.cpp:3056
msgid "Use GUI"
msgstr "Use GUI"

#: src/libslic3r/PrintConfig.cpp:3057
msgid ""
"Forces the GUI launch instead of command line slicing (if you supply a model "
"file, it will be loaded into the plater)"
msgstr ""
"Forces the GUI launch instead of command line slicing (if you supply a model "
"file, it will be loaded into the plater)"

#: src/libslic3r/PrintConfig.cpp:3063
msgid "Output Model Info"
msgstr "Output Model Info"

#: src/libslic3r/PrintConfig.cpp:3064
msgid "Write information about the model to the console."
msgstr "Write information about the model to the console."

#: src/libslic3r/PrintConfig.cpp:3069
msgid "Load config file"
msgstr "Load config file"

#: src/libslic3r/PrintConfig.cpp:3070
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."

#: src/libslic3r/PrintConfig.cpp:3075
msgid "Do not use GUI"
msgstr "Do not use GUI"

#: src/libslic3r/PrintConfig.cpp:3076
msgid ""
"Forces the command line slicing instead of gui. This takes precedence over --"
"gui if both are present."
msgstr ""
"Forces the command line slicing instead of gui. This takes precedence over --"
"gui if both are present."

#: src/libslic3r/PrintConfig.cpp:3081
msgid "Output File"
msgstr "Output File"

#: src/libslic3r/PrintConfig.cpp:3082
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."

#: src/libslic3r/PrintConfig.cpp:3088
msgid "Rotation angle around the Z axis in degrees (0-360, default: 0)."
msgstr "Rotation angle around the Z axis in degrees (0-360, default: 0)."

#: src/libslic3r/PrintConfig.cpp:3093
msgid "Rotate around X"
msgstr "Rotate around X"

#: src/libslic3r/PrintConfig.cpp:3094
msgid "Rotation angle around the X axis in degrees (0-360, default: 0)."
msgstr "Rotation angle around the X axis in degrees (0-360, default: 0)."

#: src/libslic3r/PrintConfig.cpp:3099
msgid "Rotate around Y"
msgstr "Rotate around Y"

#: src/libslic3r/PrintConfig.cpp:3100
msgid "Rotation angle around the Y axis in degrees (0-360, default: 0)."
msgstr "Rotation angle around the Y axis in degrees (0-360, default: 0)."

#: src/libslic3r/PrintConfig.cpp:3105
msgid "Save config file"
msgstr "Save config file"

#: src/libslic3r/PrintConfig.cpp:3106
msgid "Save configuration to the specified file."
msgstr "Save configuration to the specified file."

#: src/libslic3r/PrintConfig.cpp:3112
msgid "Scaling factor (default: 1)."
msgstr "Scaling factor (default: 1)."

#: src/libslic3r/PrintConfig.cpp:3125
msgid "Print center"
msgstr "Print center"

#: src/libslic3r/PrintConfig.cpp:3126
msgid "Center the print around the given center (default: 100, 100)."
msgstr "Center the print around the given center (default: 100, 100)."

#: src/libslic3r/GCode/PreviewData.cpp:176
msgid "Mixed"
msgstr "Mixed"

#: src/libslic3r/GCode/PreviewData.cpp:396
msgid "Height (mm)"
msgstr "Height (mm)"

#: src/libslic3r/GCode/PreviewData.cpp:398
msgid "Width (mm)"
msgstr "Width (mm)"

#: src/libslic3r/GCode/PreviewData.cpp:400
msgid "Speed (mm/s)"
msgstr "Speed (mm/s)"

#: src/libslic3r/GCode/PreviewData.cpp:402
msgid "Volumetric flow rate (mm3/s)"
msgstr "Volumetric flow rate (mm3/s)"

#: src/libslic3r/GCode/PreviewData.cpp:491
msgid "Default print color"
msgstr "Default print color"

#: src/libslic3r/GCode/PreviewData.cpp:495
#, c-format
msgid "up to %.2f mm"
msgstr "up to %.2f mm"

#: src/libslic3r/GCode/PreviewData.cpp:499
#, c-format
msgid "above %.2f mm"
msgstr "above %.2f mm"

#: src/libslic3r/GCode/PreviewData.cpp:504
#, c-format
msgid "%.2f - %.2f mm"
msgstr "%.2f - %.2f mm"