msgid ""
msgstr ""
"Project-Id-Version: PrusaSlicer_fi\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-05-26 13:11+0200\n"
"PO-Revision-Date: 2023-05-28 14:44+0300\n"
"Last-Translator: \n"
"Language-Team: PrusaSlicer developers\n"
"Language: fi_FI\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Poedit 3.3.1\n"

#: src/slic3r/GUI/AboutDialog.cpp:46 src/slic3r/GUI/AboutDialog.cpp:304
msgid "Portions copyright"
msgstr "Tekijänoikeuden alaiset osat"

#: src/slic3r/GUI/AboutDialog.cpp:143 src/slic3r/GUI/AboutDialog.cpp:269
msgid "Copyright"
msgstr "Tekijänoikeus"

#: src/slic3r/GUI/AboutDialog.cpp:144
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""
"Seuraavien ohjelmien (kirjastojen) lisenssisopimukset ovat kaikki osia "
"lisenssisopimuksessa"

#: src/slic3r/GUI/AboutDialog.cpp:213
#, c-format, boost-format
msgid "About %s"
msgstr "Tietoja: %s"

#: src/slic3r/GUI/AboutDialog.cpp:244 src/slic3r/GUI/AboutDialog.cpp:368
#: src/slic3r/GUI/GUI_App.cpp:282
msgid "Version"
msgstr "Versio"

#. TRN AboutDialog: "Slic3r %1% GNU Affero General Public License"
#: src/slic3r/GUI/AboutDialog.cpp:271 src/slic3r/GUI/GUI_App.cpp:288
msgid "is licensed under the"
msgstr "on lisensoitu"

#: src/slic3r/GUI/AboutDialog.cpp:272 src/slic3r/GUI/GUI_App.cpp:288
msgid "GNU Affero General Public License, version 3"
msgstr "GNU Affero General Public License, versio 3"

#: src/slic3r/GUI/AboutDialog.cpp:273
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""
"PrusaSlicer pohjautuu Allessandro Ranelluccin ja RepRap-yhteisön Slic3r:ään."

#: src/slic3r/GUI/AboutDialog.cpp:274
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""
"Mukana ovat olleet Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik ja "
"lukuisat muut."

#: src/slic3r/GUI/AboutDialog.cpp:309
msgid "Copy Version Info"
msgstr "Kopioi versioinformaatio"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""
"%s kohtasi virheen. Se todennäköisesti johtui muistin loppumisesta. Jos olet "
"varma, että järjestelmässäsi on tarpeeksi RAM-muistia, tämä voi myös olla "
"virhe, ja olisimme iloisia, jos ilmoitat siitä."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84
#, boost-format
msgid "PrusaSlicer has encountered a fatal error: \"%1%\""
msgstr "PrusaSlicer kohtasi vakavan virheen: \"%1%\""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
msgid ""
"Please save your project and restart PrusaSlicer. We would be glad if you "
"reported the issue."
msgstr ""
"Tallenna projektisi ja käynnistä PrusaSlicer uudelleen. Olisimme iloisia jos "
"raportoisit ongelmasta."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:188
msgid "Slicing complete"
msgstr "Viipalointi valmis"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
#, boost-format
msgid "Masked SLA file exported to %1%"
msgstr "Maskattu SLA-tiedosto viety sijaintiin %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:279
msgid "Access violation"
msgstr "Käyttöoikeusvirhe"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:281
msgid "Illegal instruction"
msgstr "Laiton käsky"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:283
msgid "Divide by zero"
msgstr "Jakaa nollalla"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:285
msgid "Overflow"
msgstr "Ylivuoto"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:287
msgid "Underflow"
msgstr "Alivuoto"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290
msgid "Floating reserved operand"
msgstr "Float-varattu operandi"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:293
msgid "Stack overflow"
msgstr "Pakan ylivuoto"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:652
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:719
msgid "Running post-processing scripts"
msgstr "Suoritetaan jälkikäsittelyskriptejä"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:683
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:703
msgid "Unknown error occured during exporting G-code."
msgstr "Tuntematon virhe G-koodin viennissä."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:688
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""
"Väliaikaisen G-koodin vienti tuotettuun G-koodiin epäonnistui. SD-Kortti "
"saattaa olla kirjoituslukittu?\n"
"Virheilmoitus: %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:691
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""
"Väliaikaisen G-koodin vienti tuotettuun G-koodiin epäonnistui. "
"Kohdelaitteessa saattaa olla ongelma, yritä vientiä uudelleen tai koita eri "
"laitteella. Korruptoitunut G-koodi sijaitsee %1%.tmp -tiedostossa."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:694
#, boost-format
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""
"G-koodin uudelleennimeäminen valittuun kansioon kopioimisen jälkeen "
"epäonnistui. Tämänhetkinen polku on %1%.tmp. Yritä vientiä uudelleen."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:697
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""
"Väliaikaisen G-koodin vienti onnistui mutta alkuperäistä koodia %1%;ssä ei "
"voitu avata kopiointitarkastuksen aikana.  Tuotettu G-koodi sijaitsee %2%."
"tmp;ssä."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:700
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""
"Väliaikaisen G-koodin vienti onnistui, mutta vietyä koodia ei voitu avata "
"kopiointitarkastuksen aikana. Tuotettu G-koodi sijaitsee %1%.tmp;ssä."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:708
#, boost-format
msgid "G-code file exported to %1%"
msgstr "G-kooditiedosto viety sijaintiin %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:738
#, boost-format
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""
"Ajoitetaan vientiä sijaintiin `%1%`. Katso Ikkuna -> Tulosta isäntäkoneen "
"latausjono"

#: src/slic3r/GUI/BedShapeDialog.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:224 src/slic3r/GUI/Plater.cpp:222
#: src/slic3r/GUI/Tab.cpp:2874
msgid "Size"
msgstr "Koko"

#: src/slic3r/GUI/BedShapeDialog.cpp:32
msgid "Origin"
msgstr "Alkuperä"

#: src/slic3r/GUI/BedShapeDialog.cpp:33
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1993
#: src/libslic3r/PrintConfig.cpp:1107
msgid "Diameter"
msgstr "Halkaisija"

#: src/slic3r/GUI/BedShapeDialog.cpp:49
msgid "Size in X and Y of the rectangular plate."
msgstr "Koko suorakulmaisen alustan X- Ja Y akseleissa."

#: src/slic3r/GUI/BedShapeDialog.cpp:58
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr "Matka 0,0 G-koodin sijainnista etuvasemmasta kulmasta suorakulmiota."

#: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:336
#: src/slic3r/GUI/ConfigWizard.cpp:1845 src/slic3r/GUI/ConfigWizard.cpp:1881
#: src/slic3r/GUI/ConfigWizard.cpp:1895
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100
#: src/slic3r/GUI/GCodeViewer.cpp:3462 src/slic3r/GUI/GCodeViewer.cpp:3468
#: src/slic3r/GUI/GCodeViewer.cpp:3476 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:494
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:514
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1826
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1210
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1976
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:309
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:433
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:554
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:555
#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
#: src/slic3r/GUI/WipeTowerDialog.cpp:118 src/libslic3r/PrintConfig.cpp:276
#: src/libslic3r/PrintConfig.cpp:300 src/libslic3r/PrintConfig.cpp:307
#: src/libslic3r/PrintConfig.cpp:476 src/libslic3r/PrintConfig.cpp:632
#: src/libslic3r/PrintConfig.cpp:655 src/libslic3r/PrintConfig.cpp:722
#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:780
#: src/libslic3r/PrintConfig.cpp:900 src/libslic3r/PrintConfig.cpp:911
#: src/libslic3r/PrintConfig.cpp:929 src/libslic3r/PrintConfig.cpp:1110
#: src/libslic3r/PrintConfig.cpp:1293 src/libslic3r/PrintConfig.cpp:1357
#: src/libslic3r/PrintConfig.cpp:1367 src/libslic3r/PrintConfig.cpp:1657
#: src/libslic3r/PrintConfig.cpp:1848 src/libslic3r/PrintConfig.cpp:1909
#: src/libslic3r/PrintConfig.cpp:1927 src/libslic3r/PrintConfig.cpp:1945
#: src/libslic3r/PrintConfig.cpp:2003 src/libslic3r/PrintConfig.cpp:2013
#: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/PrintConfig.cpp:2144
#: src/libslic3r/PrintConfig.cpp:2163 src/libslic3r/PrintConfig.cpp:2184
#: src/libslic3r/PrintConfig.cpp:2196 src/libslic3r/PrintConfig.cpp:2204
#: src/libslic3r/PrintConfig.cpp:2245 src/libslic3r/PrintConfig.cpp:2253
#: src/libslic3r/PrintConfig.cpp:2263 src/libslic3r/PrintConfig.cpp:2271
#: src/libslic3r/PrintConfig.cpp:2279 src/libslic3r/PrintConfig.cpp:2345
#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2652
#: src/libslic3r/PrintConfig.cpp:2667 src/libslic3r/PrintConfig.cpp:2766
#: src/libslic3r/PrintConfig.cpp:2775 src/libslic3r/PrintConfig.cpp:2821
#: src/libslic3r/PrintConfig.cpp:2910 src/libslic3r/PrintConfig.cpp:2922
#: src/libslic3r/PrintConfig.cpp:2948 src/libslic3r/PrintConfig.cpp:3075
#: src/libslic3r/PrintConfig.cpp:3163 src/libslic3r/PrintConfig.cpp:3170
#: src/libslic3r/PrintConfig.cpp:3177 src/libslic3r/PrintConfig.cpp:3191
#: src/libslic3r/PrintConfig.cpp:3234 src/libslic3r/PrintConfig.cpp:3244
#: src/libslic3r/PrintConfig.cpp:3254 src/libslic3r/PrintConfig.cpp:3404
#: src/libslic3r/PrintConfig.cpp:3413 src/libslic3r/PrintConfig.cpp:3422
#: src/libslic3r/PrintConfig.cpp:3432 src/libslic3r/PrintConfig.cpp:3465
#: src/libslic3r/PrintConfig.cpp:3508 src/libslic3r/PrintConfig.cpp:3518
#: src/libslic3r/PrintConfig.cpp:3530 src/libslic3r/PrintConfig.cpp:3550
#: src/libslic3r/PrintConfig.cpp:3565 src/libslic3r/PrintConfig.cpp:3575
#: src/libslic3r/PrintConfig.cpp:3718 src/libslic3r/PrintConfig.cpp:3755
#: src/libslic3r/PrintConfig.cpp:3956 src/libslic3r/PrintConfig.cpp:3971
#: src/libslic3r/PrintConfig.cpp:3985 src/libslic3r/PrintConfig.cpp:3996
#: src/libslic3r/PrintConfig.cpp:4009 src/libslic3r/PrintConfig.cpp:4054
#: src/libslic3r/PrintConfig.cpp:4064 src/libslic3r/PrintConfig.cpp:4073
#: src/libslic3r/PrintConfig.cpp:4083 src/libslic3r/PrintConfig.cpp:4099
#: src/libslic3r/PrintConfig.cpp:4123 src/libslic3r/PrintConfig.cpp:4150
msgid "mm"
msgstr "mm"

#: src/slic3r/GUI/BedShapeDialog.cpp:66
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""
"Tulostusalustan halkaisija. Oletetaan että origo (0,0) sijaistee keskellä."

#: src/slic3r/GUI/BedShapeDialog.cpp:79
msgid "Rectangular"
msgstr "Suorakulmainen"

#: src/slic3r/GUI/BedShapeDialog.cpp:80
msgid "Circular"
msgstr "Ympyrämainen"

#: src/slic3r/GUI/BedShapeDialog.cpp:81 src/libslic3r/ExtrusionRole.cpp:51
#: src/libslic3r/ExtrusionRole.cpp:85
msgid "Custom"
msgstr "Mukautettu"

#: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:182
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:222
#: src/slic3r/GUI/GUI_ObjectList.cpp:1804
msgid "Shape"
msgstr "Muoto"

#: src/slic3r/GUI/BedShapeDialog.cpp:131 src/slic3r/GUI/ConfigWizard.cpp:1780
msgid "Bed Shape"
msgstr "Alustan muoto"

#: src/slic3r/GUI/BedShapeDialog.cpp:206
msgid "Load shape from STL..."
msgstr "Lataa muoto STL tiedostosta..."

#: src/slic3r/GUI/BedShapeDialog.cpp:252 src/slic3r/GUI/GCodeViewer.cpp:3924
#: src/slic3r/GUI/MainFrame.cpp:2241
msgid "Settings"
msgstr "Asetukset"

#: src/slic3r/GUI/BedShapeDialog.cpp:276
msgid "Texture"
msgstr "Tekstuuri"

#: src/slic3r/GUI/BedShapeDialog.cpp:286 src/slic3r/GUI/BedShapeDialog.cpp:357
msgid "Load..."
msgstr "Lataa…"

#: src/slic3r/GUI/BedShapeDialog.cpp:295 src/slic3r/GUI/BedShapeDialog.cpp:365
#: src/slic3r/GUI/Tab.cpp:4160
msgid "Remove"
msgstr "Poista"

#: src/slic3r/GUI/BedShapeDialog.cpp:320 src/slic3r/GUI/BedShapeDialog.cpp:391
msgid "Not found:"
msgstr "Ei löydetty:"

#: src/slic3r/GUI/BedShapeDialog.cpp:347
msgid "Model"
msgstr "Malli"

#: src/slic3r/GUI/BedShapeDialog.cpp:509
msgid "Choose an STL file to import bed shape from:"
msgstr "Valitse STL-tiedosto josta valita alustan muoto:"

#: src/slic3r/GUI/BedShapeDialog.cpp:515 src/slic3r/GUI/BedShapeDialog.cpp:563
#: src/slic3r/GUI/BedShapeDialog.cpp:585
msgid "Invalid file format."
msgstr "Virheellinen tiedostomuoto."

#: src/slic3r/GUI/BedShapeDialog.cpp:526
msgid "Error! Invalid model"
msgstr "Virhe! Virheellinen malli"

#: src/slic3r/GUI/BedShapeDialog.cpp:534
msgid "The selected file contains no geometry."
msgstr "Valittu tiedosto ei sisällä geometriaa."

#: src/slic3r/GUI/BedShapeDialog.cpp:538
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr "Valittu tiedosto sisältää useita erillisiä alueita. Tätä ei tueta."

#: src/slic3r/GUI/BedShapeDialog.cpp:553
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr "Valitse tiedosto josta tuoda alustan tekstuuri (PNG/SVG):"

#: src/slic3r/GUI/BedShapeDialog.cpp:575
msgid "Choose an STL file to import bed model from:"
msgstr "Valitse STL-tiedosto josta valita alustan muoto:"

#: src/slic3r/GUI/BonjourDialog.cpp:58
msgid "Network lookup"
msgstr "Verkon hakeminen"

#: src/slic3r/GUI/BonjourDialog.cpp:75 src/slic3r/GUI/BonjourDialog.cpp:253
msgid "Address"
msgstr "Osoite"

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "Hostname"
msgstr "Isäntänimi"

#: src/slic3r/GUI/BonjourDialog.cpp:77
msgid "Service name"
msgstr "Palvelunimi"

#: src/slic3r/GUI/BonjourDialog.cpp:79
msgid "OctoPrint version"
msgstr "OctoPrint versio"

#: src/slic3r/GUI/BonjourDialog.cpp:227
msgid "Searching for devices"
msgstr "Laitteita etsitään"

#: src/slic3r/GUI/BonjourDialog.cpp:234
msgid "Finished"
msgstr "Valmis"

#: src/slic3r/GUI/BonjourDialog.cpp:240
msgid "Multiple resolved IP addresses"
msgstr "Useita ratkaistuja IP-osoitteita"

#: src/slic3r/GUI/BonjourDialog.cpp:249
#, boost-format
msgid ""
"There are several IP addresses resolving to hostname %1%.\n"
"Please select one that should be used."
msgstr ""
"On olemassa useita IP-osoitteita, jotka käyttävät isäntänimeä %1%.\n"
"Valitse se, jota pitäisi käyttää."

#: src/slic3r/GUI/ButtonsDescription.cpp:21
msgid "Palette 1 (default)"
msgstr "Paletti 1 (oletus)"

#: src/slic3r/GUI/ButtonsDescription.cpp:22
msgid "Palette 2"
msgstr "Paletti 2"

#: src/slic3r/GUI/ButtonsDescription.cpp:23
msgid "Palette 3"
msgstr "Paletti 3"

#: src/slic3r/GUI/ButtonsDescription.cpp:24
msgid "Palette 4"
msgstr "Paletti 4"

#: src/slic3r/GUI/ButtonsDescription.cpp:25
msgid "Palette 5"
msgstr "Paletti 5"

#: src/slic3r/GUI/ButtonsDescription.cpp:26
msgid "Palette 6"
msgstr "Paletti 6"

#: src/slic3r/GUI/ButtonsDescription.cpp:27
msgid "Palette 7"
msgstr "Paletti 7"

#: src/slic3r/GUI/ButtonsDescription.cpp:28
msgid "Palette 8"
msgstr "Paletti 8"

#: src/slic3r/GUI/ButtonsDescription.cpp:112
msgid "Revert color to default"
msgstr "Nollaa väri oletusarvoon"

#: src/slic3r/GUI/ButtonsDescription.cpp:127
msgid "Value is the same as the system value"
msgstr "Arvo ei ole järjestelmän arvo"

#: src/slic3r/GUI/ButtonsDescription.cpp:128
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""
"Arvoa muutettiin ja se ei ole järjestelmäarvo tai viimeksi tallennettu "
"esiasetus"

#: src/slic3r/GUI/ButtonsDescription.cpp:155
msgid "Default palette for mode markers"
msgstr "Oletuspaletti tilan merkitsijöille"

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2417
#: src/slic3r/GUI/wxExtensions.cpp:714
msgid "Simple"
msgstr "Yksinkertainen"

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2420
#: src/slic3r/GUI/wxExtensions.cpp:714
msgid "Expert"
msgstr "Ekspertti"

#: src/slic3r/GUI/ButtonsDescription.cpp:182
msgid "Revert color"
msgstr "Nollaa väri"

#: src/slic3r/GUI/ButtonsDescription.cpp:200
msgid "Buttons And Text Colors Description"
msgstr "Painikkeiden ja tekstien värien selitykset"

#: src/slic3r/GUI/ConfigManipulation.cpp:50
msgid ""
"Layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""
"Kerroskorkeus ei ole kelvollinen\n"
"\n"
"Kerroskorkeus nollataan arvoon 0.01."

#: src/slic3r/GUI/ConfigManipulation.cpp:51
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1401
#: src/libslic3r/PrintConfig.cpp:296
msgid "Layer height"
msgstr "Kerroskorkeus"

#: src/slic3r/GUI/ConfigManipulation.cpp:62
msgid ""
"First layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""
"Ensimmäisen kerroksen korkeus ei ole kelvollinen\n"
"\n"
"Ensimmäisen kerroksen korkeus nollataan arvoon 0.01."

#: src/slic3r/GUI/ConfigManipulation.cpp:63 src/libslic3r/PrintConfig.cpp:1289
msgid "First layer height"
msgstr "Ensimmäisen kerroksen korkeus"

#: src/slic3r/GUI/ConfigManipulation.cpp:82
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Detect thin walls disabled"
msgstr ""
"Spiraalimaljakkotila vaatii:\n"
"- yhden kehän\n"
"- ei yläkerroksia\n"
"- 0 % täyttötiheys\n"
"- ei tukimateriaalia\n"
"- Ohuiden seinien tunnistus poistettu käytöstä"

#: src/slic3r/GUI/ConfigManipulation.cpp:89
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""
"Pitäisikö minun säätää näitä asetuksia, jotta spiraalimaljakon saa käyttöön?"

#: src/slic3r/GUI/ConfigManipulation.cpp:90
msgid "Spiral Vase"
msgstr "Spiraalimaljakko"

#: src/slic3r/GUI/ConfigManipulation.cpp:121
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""
"Jotta pyyhkäisytorni toimisi liukenevien tukimateriaalien kanssa, "
"tukikerrokset\n"
"täytyy synkronisoida objektin kerroksien kanssa."

#: src/slic3r/GUI/ConfigManipulation.cpp:124
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""
"Pitäisikö minun synkronoida tukikerrokset pyyhkäisytornin käyttöön "
"ottamiseksi?"

#: src/slic3r/GUI/ConfigManipulation.cpp:125
#: src/slic3r/GUI/ConfigManipulation.cpp:143
msgid "Wipe Tower"
msgstr "Pyyhkäisytorni"

#: src/slic3r/GUI/ConfigManipulation.cpp:138 src/libslic3r/Print.cpp:676
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:142
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""
"Pitäisikö minun säätää näitä asetuksia, jotta spiraalimaljakon saa käyttöön?"

#: src/slic3r/GUI/ConfigManipulation.cpp:164
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""
"Tuet toimivat paremmin, jos seuraava ominaisuus on käytössä:\n"
"- Havaitse silloitusalueet"

#: src/slic3r/GUI/ConfigManipulation.cpp:167
msgid "Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:168
msgid "Support Generator"
msgstr "Tukimateriaalin generaattori"

#: src/slic3r/GUI/ConfigManipulation.cpp:192
#, boost-format
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr "Täyttökuvio %1% ei ole tarkoitettu käytettäväksi 100%-tiheydellä."

#: src/slic3r/GUI/ConfigManipulation.cpp:194
msgid "Shall I switch to rectilinear fill pattern?"
msgstr "Pitäisikö minun vaihtaa suoraviivaiseen täyttökuvioon?"

#: src/slic3r/GUI/ConfigManipulation.cpp:195
#: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128
#: src/slic3r/GUI/Plater.cpp:470 src/slic3r/GUI/Tab.cpp:1457
#: src/slic3r/GUI/Tab.cpp:1459 src/libslic3r/PrintConfig.cpp:491
#: src/libslic3r/PrintConfig.cpp:809 src/libslic3r/PrintConfig.cpp:829
#: src/libslic3r/PrintConfig.cpp:1185 src/libslic3r/PrintConfig.cpp:1198
#: src/libslic3r/PrintConfig.cpp:1223 src/libslic3r/PrintConfig.cpp:1443
#: src/libslic3r/PrintConfig.cpp:1480 src/libslic3r/PrintConfig.cpp:1544
#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:2404
#: src/libslic3r/PrintConfig.cpp:2421
msgid "Infill"
msgstr "Täyttö"

#: src/slic3r/GUI/ConfigManipulation.cpp:348
msgid "Head penetration should not be greater than the head width."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:350
msgid "Invalid Head penetration"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:361
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:363
msgid "Invalid pinhead diameter"
msgstr "Virheellinen neulanpään halkaisija"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
msgid "Upgrade"
msgstr "Päivitä"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
msgid "Downgrade"
msgstr "Alenna"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
msgid "Before roll back"
msgstr "Ennen palautusta"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27 src/libslic3r/PrintConfig.cpp:350
msgid "User"
msgstr "Käyttäjä"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:30
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:855
#: src/libslic3r/ExtrusionRole.cpp:37
msgid "Unknown"
msgstr "Tuntematon"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
msgid "Active"
msgstr "Aktiivinen"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
msgid "PrusaSlicer version"
msgstr "PrusaSlicer versio"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1485
msgid "print"
msgstr "tuloste"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
msgid "filaments"
msgstr "tulostuslangat"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1487
msgid "SLA print"
msgstr "SLA tuloste"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
#: src/slic3r/GUI/ConfigWizard.cpp:842 src/slic3r/GUI/GUI.cpp:331
#: src/slic3r/GUI/Plater.cpp:854 src/libslic3r/Preset.cpp:1488
msgid "SLA material"
msgstr "SLA materiaali"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1489
msgid "printer"
msgstr "tulostin"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1318
msgid "vendor"
msgstr "valmistaja"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
msgid "version"
msgstr "versio"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76
msgid "min PrusaSlicer version"
msgstr "minimi PrusaSlicer versio"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
msgid "max PrusaSlicer version"
msgstr "maksimi PrusaSlicer versio"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "model"
msgstr "malli"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "variants"
msgstr "variantit"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93
#, c-format, boost-format
msgid "Incompatible with this %s"
msgstr "Ei yhteensopiva; %s"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96
msgid "Activate"
msgstr "Aktivoi"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123
msgid "Configuration Snapshots"
msgstr "Konfiguraation tilannekuva"

#: src/slic3r/GUI/ConfigWizard.cpp:336
msgid "nozzle"
msgstr "tulostuskärki"

#: src/slic3r/GUI/ConfigWizard.cpp:340
msgid "Alternate nozzles:"
msgstr "Vaihtoehtoiset tulostuskärjet:"

#: src/slic3r/GUI/ConfigWizard.cpp:404
msgid "All standard"
msgstr "Kaikki standardi"

#: src/slic3r/GUI/ConfigWizard.cpp:404
msgid "Standard"
msgstr "Standardi"

#: src/slic3r/GUI/ConfigWizard.cpp:405 src/slic3r/GUI/ConfigWizard.cpp:726
#: src/slic3r/GUI/FileArchiveDialog.cpp:264
#: src/slic3r/GUI/FileArchiveDialog.cpp:286 src/slic3r/GUI/Preferences.cpp:527
#: src/slic3r/GUI/Tab.cpp:4245 src/slic3r/GUI/UnsavedChangesDialog.cpp:1164
msgid "All"
msgstr "Kaikki"

#: src/slic3r/GUI/ConfigWizard.cpp:406 src/slic3r/GUI/ConfigWizard.cpp:727
#: src/slic3r/GUI/DoubleSlider.cpp:2099
#: src/slic3r/GUI/FileArchiveDialog.cpp:268
#: src/slic3r/GUI/FileArchiveDialog.cpp:286
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1983 src/slic3r/GUI/Plater.cpp:441
#: src/slic3r/GUI/Plater.cpp:596 src/slic3r/GUI/Preferences.cpp:529
#: src/libslic3r/PrintConfig.cpp:1345
msgid "None"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:558
#, c-format, boost-format
msgid "Welcome to the %s Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:560
#, c-format, boost-format
msgid "Welcome to the %s Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:562
msgid "Welcome"
msgstr "Tervetuloa"

#: src/slic3r/GUI/ConfigWizard.cpp:564
#, c-format, boost-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:569
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:572
msgid ""
"Perform desktop integration (Sets this binary to be searchable by the "
"system)."
msgstr ""
"Suorita työpöytäintegraatio (Asettaa tämän binäärin järjestelmän "
"haettavaksi)."

#: src/slic3r/GUI/ConfigWizard.cpp:624
#, c-format, boost-format
msgid "%s Family"
msgstr "%s Perhe"

#: src/slic3r/GUI/ConfigWizard.cpp:715
msgid "Printer:"
msgstr "Tulostin:"

#: src/slic3r/GUI/ConfigWizard.cpp:717
msgid "Vendor:"
msgstr "Valmistaja:"

#: src/slic3r/GUI/ConfigWizard.cpp:718
msgid "Profile:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:795 src/slic3r/GUI/ConfigWizard.cpp:986
#: src/slic3r/GUI/ConfigWizard.cpp:1072 src/slic3r/GUI/ConfigWizard.cpp:1211
msgid "(All)"
msgstr "(kaikki)"

#: src/slic3r/GUI/ConfigWizard.cpp:799 src/slic3r/GUI/ConfigWizard.cpp:1213
msgid "(Templates)"
msgstr "(pohjat)"

#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
#: src/slic3r/GUI/ConfigWizard.cpp:835
#, boost-format
msgid ""
"%1% visible for <b>(\"Template\")</b> printer are universal profiles "
"available for all printers. These might not be compatible with your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:835 src/slic3r/GUI/ConfigWizard.cpp:838
#: src/slic3r/GUI/ConfigWizard.cpp:2459 src/slic3r/GUI/ConfigWizard.cpp:3413
msgid "Filaments"
msgstr "Tulostuslangat"

#: src/slic3r/GUI/ConfigWizard.cpp:835 src/slic3r/GUI/ConfigWizard.cpp:838
msgid "SLA materials"
msgstr "SLA materiaalit"

#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
#: src/slic3r/GUI/ConfigWizard.cpp:838
#, boost-format
msgid ""
"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr ""
"%1% merkittynä <b>*</b>-symboleilla <b>eivät</b> ole yhteensopivia joidenkin "
"ladattujen tulostimien kanssa."

#. TRN ConfigWizard: Materials : "%1%" = "filament"/"SLA material"
#: src/slic3r/GUI/ConfigWizard.cpp:842
#, boost-format
msgid "All installed printers are compatible with the selected %1%."
msgstr "Kaikki ladatut tulostimet ovat yhteensopivia valitun %1%;n kanssa."

#: src/slic3r/GUI/ConfigWizard.cpp:842 src/libslic3r/Preset.cpp:1486
msgid "filament"
msgstr "tulostuslanka"

#: src/slic3r/GUI/ConfigWizard.cpp:866
msgid ""
"Only the following installed printers are compatible with the selected "
"filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:867
msgid ""
"Only the following installed printers are compatible with the selected SLA "
"materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1261
msgid ""
"You have selected template filament. Please note that these filaments are "
"available for all printers but are NOT certain to be compatible with your "
"printer. Do you still wish to have this filament selected?\n"
"(This message won't be displayed again.)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1262 src/slic3r/GUI/ConfigWizard.cpp:2769
#: src/slic3r/GUI/ConfigWizard.cpp:2909 src/slic3r/GUI/DoubleSlider.cpp:2591
#: src/slic3r/GUI/DoubleSlider.cpp:2612 src/slic3r/GUI/GUI.cpp:245
#: src/slic3r/GUI/GUI_App.cpp:3447 src/slic3r/GUI/UpdateDialogs.cpp:204
#: src/slic3r/GUI/UpdateDialogs.cpp:212 src/slic3r/GUI/UpdateDialogs.cpp:217
#: src/slic3r/GUI/UpdateDialogs.cpp:222 src/slic3r/GUI/UpdateDialogs.cpp:229
#: src/slic3r/GUI/UpdateDialogs.cpp:234
msgid "Notice"
msgstr "Huomio"

#: src/slic3r/GUI/ConfigWizard.cpp:1310
msgid "Custom Printer Setup"
msgstr "Mukautettu tulostusasennus"

#: src/slic3r/GUI/ConfigWizard.cpp:1310
msgid "Custom Printer"
msgstr "Mukautettu tulostin"

#: src/slic3r/GUI/ConfigWizard.cpp:1312
msgid "Define a custom printer profile"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1313
msgid "Custom profile name:"
msgstr "Mukautettun profiilin nimi:"

#: src/slic3r/GUI/ConfigWizard.cpp:1330
msgid "Automatic updates"
msgstr "Automaattiset päivitykset"

#: src/slic3r/GUI/ConfigWizard.cpp:1330
msgid "Updates"
msgstr "Päivitykset"

#: src/slic3r/GUI/ConfigWizard.cpp:1338
msgid "Check for application updates"
msgstr "Tarkista sovelluspäivitykset"

#: src/slic3r/GUI/ConfigWizard.cpp:1342
#, c-format, boost-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1348 src/slic3r/GUI/Preferences.cpp:288
msgid "Update built-in Presets automatically"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1352
#, c-format, boost-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1355
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""
"Päivityksiä ei ikinä asenneta ilman käyttäjän lupaa, eivätkä ne ikinä "
"ylikirjoita käyttäjän räätälöimiä asetuksia."

#: src/slic3r/GUI/ConfigWizard.cpp:1360
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""
"Lisäksi koko kokoonpanosta luodaan tilannekuva varmuuskopioksi ennen kuin "
"päivitys asennetaan."

#: src/slic3r/GUI/ConfigWizard.cpp:1409 src/slic3r/GUI/Preferences.cpp:1119
msgid "Download path"
msgstr "Latausreitti"

#: src/slic3r/GUI/ConfigWizard.cpp:1414 src/slic3r/GUI/FirmwareDialog.cpp:815
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:300
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375
msgid "Browse"
msgstr "Selaa"

#: src/slic3r/GUI/ConfigWizard.cpp:1419
msgid "Choose folder"
msgstr "Valitse kansio"

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Downloads from URL"
msgstr "Lataukset verkko-osoitteesta"

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Downloads"
msgstr "Lataukset"

#: src/slic3r/GUI/ConfigWizard.cpp:1465
msgid "Allow built-in downloader"
msgstr "Salli sisäänrakennettu lataaja"

#. TRN ConfigWizard : Downloader : %1% = "PrusaSlicer"
#: src/slic3r/GUI/ConfigWizard.cpp:1472
#, boost-format
msgid ""
"If enabled, %1% registers to start on custom URL on www.printables.com. You "
"will be able to use button with %1% logo to open models in this %1%. The "
"model will be downloaded into folder you choose bellow."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1479
msgid ""
"On Linux systems the process of registration also creates desktop "
"integration files for this version of application."
msgstr ""
"Linux-järjestelmillä rekisteröinti myös luo työpöydän integraatiotiedostot "
"tälle ohjelman versiolle."

#: src/slic3r/GUI/ConfigWizard.cpp:1506
msgid "Chosen directory for downloads does not exist."
msgstr "Latauksille valittua kansiota ei ole olemassa."

#: src/slic3r/GUI/ConfigWizard.cpp:1593 src/slic3r/GUI/GUI_Factories.cpp:818
#: src/slic3r/GUI/Plater.cpp:3751
msgid "Reload from disk"
msgstr "Lataa uudelleen levyltä"

#: src/slic3r/GUI/ConfigWizard.cpp:1596
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""
"Vie mallien ja osien täydet tiedostopolkunimet 3mf- ja amf-tiedostoihin"

#: src/slic3r/GUI/ConfigWizard.cpp:1600
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""
"Jos käytössä, sallii \"Lataa uudelleen levyltä\"-komennon automaattisesti "
"etsiä ja ladata tiedostot tarpeen mukaan.\n"
"Jos ei käytössä, \"Lataa uudelleen levyltä\"-komento pyytää valita jokaisen "
"tiedoston tiedostojen valintaikkunalla."

#: src/slic3r/GUI/ConfigWizard.cpp:1609
msgid "Files association"
msgstr "Tiedostojen yhdistäminen"

#: src/slic3r/GUI/ConfigWizard.cpp:1611 src/slic3r/GUI/Preferences.cpp:274
msgid "Associate .3mf files to PrusaSlicer"
msgstr "Yhdistä .3mf-tiedostot PrusaSliceriin"

#: src/slic3r/GUI/ConfigWizard.cpp:1612 src/slic3r/GUI/Preferences.cpp:279
msgid "Associate .stl files to PrusaSlicer"
msgstr "Yhdistä .stl-tiedostot PrusaSliceriin"

#: src/slic3r/GUI/ConfigWizard.cpp:1622
msgid "View mode"
msgstr "Katselutila"

#: src/slic3r/GUI/ConfigWizard.cpp:1624
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""
"PrusaSlicerin käyttöliittymää on kolmessa eri muodossa:\n"
"Yksinkertainen, Kehittynyt ja Ekspertti.\n"
"Yksinkertainen tila näyttää vain tavallisessa 3D-tulostuksessa useiten "
"käytetyt asetukset. Kaksi muuta tilaa tarjoavat kehittyneempää hienosäätöä "
"ja sopivat nimensä mukaan kehittyneille ja erittäin kehittyneille "
"käyttäjille."

#: src/slic3r/GUI/ConfigWizard.cpp:1629
msgid "Simple mode"
msgstr "Yksinkertainen tila"

#: src/slic3r/GUI/ConfigWizard.cpp:1630
msgid "Advanced mode"
msgstr "Kehittynyt tila"

#: src/slic3r/GUI/ConfigWizard.cpp:1631
msgid "Expert mode"
msgstr "Eksperttitila"

#: src/slic3r/GUI/ConfigWizard.cpp:1644
msgid "The size of the object can be specified in inches"
msgstr "Objektin koko voidaan määritellä tuumina"

#: src/slic3r/GUI/ConfigWizard.cpp:1645
msgid "Use inches"
msgstr "Käytä tuumaa yksikkönä"

#: src/slic3r/GUI/ConfigWizard.cpp:1665
msgid "Other Vendors"
msgstr "Muut valmistajat"

#: src/slic3r/GUI/ConfigWizard.cpp:1669
#, c-format, boost-format
msgid "Pick another vendor supported by %s"
msgstr "Valitse toinen valmistaja, jota %s tukee"

#: src/slic3r/GUI/ConfigWizard.cpp:1702
msgid "Firmware Type"
msgstr "Laiteohjelmiston tyyppi"

#: src/slic3r/GUI/ConfigWizard.cpp:1702 src/slic3r/GUI/Tab.cpp:2473
msgid "Firmware"
msgstr "Laiteohjelmisto"

#: src/slic3r/GUI/ConfigWizard.cpp:1706
msgid "Choose the type of firmware used by your printer."
msgstr "Valitse tulostimesi käyttämä laiteohjelmiston tyyppi."

#: src/slic3r/GUI/ConfigWizard.cpp:1755 src/slic3r/GUI/ConfigWizard.cpp:1827
#: src/slic3r/GUI/ConfigWizard.cpp:1832 src/slic3r/GUI/ConfigWizard.cpp:1837
#: src/slic3r/GUI/Field.cpp:258 src/slic3r/GUI/Field.cpp:328
#: src/slic3r/GUI/Field.cpp:1585 src/slic3r/GUI/GUI_ObjectLayers.cpp:435
msgid "Invalid numeric input."
msgstr "Virheellinen numeerinen syöte."

#: src/slic3r/GUI/ConfigWizard.cpp:1780
msgid "Bed Shape and Size"
msgstr "Alustan muoto ja koko"

#: src/slic3r/GUI/ConfigWizard.cpp:1783
msgid "Set the shape of your printer's bed."
msgstr "Aseta tulostusalustasi muoto."

#. TRN ConfigWizard : Size of possible print, related on printer size
#: src/slic3r/GUI/ConfigWizard.cpp:1804
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1834
msgid "Build Volume"
msgstr "Tulostustilavuus"

#: src/slic3r/GUI/ConfigWizard.cpp:1807
msgid "Set the printer height."
msgstr "Aseta tulostimen korkeus."

#: src/slic3r/GUI/ConfigWizard.cpp:1844 src/libslic3r/PrintConfig.cpp:305
msgid "Max print height"
msgstr "Tulosteen suurin sallittu korkeus"

#: src/slic3r/GUI/ConfigWizard.cpp:1862
msgid "Filament and Nozzle Diameters"
msgstr "Tulostuslankojen ja tulostuskärkien halkaisijat"

#: src/slic3r/GUI/ConfigWizard.cpp:1862
msgid "Print Diameters"
msgstr "Tulosteen koot"

#: src/slic3r/GUI/ConfigWizard.cpp:1877
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "Syötä tulostimesi tulostuskärjen halkaisija."

#: src/slic3r/GUI/ConfigWizard.cpp:1880
msgid "Nozzle Diameter"
msgstr "Tulostuskärjen halkaisija"

#: src/slic3r/GUI/ConfigWizard.cpp:1890
msgid "Enter the diameter of your filament."
msgstr "Syötä muovisi halkaisija."

#: src/slic3r/GUI/ConfigWizard.cpp:1891
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"Hyvää tarkkuutta vaaditaan, joten käytä työntömittaa ja mittaa useasta "
"kohtaa lankaa pitkin, ja laske sitten keskiarvo."

#: src/slic3r/GUI/ConfigWizard.cpp:1894
msgid "Filament Diameter"
msgstr "Tulostuslangan halkaisija"

#: src/slic3r/GUI/ConfigWizard.cpp:1952
msgid "Nozzle and Bed Temperatures"
msgstr "Tulostuskärjen- ja alustan lämpötilat"

#: src/slic3r/GUI/ConfigWizard.cpp:1952
msgid "Temperatures"
msgstr "Lämpötilat"

#: src/slic3r/GUI/ConfigWizard.cpp:1968
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1969
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1972
msgid "Extrusion Temperature:"
msgstr "Ekstruusio lämpötila:"

#: src/slic3r/GUI/ConfigWizard.cpp:1973 src/slic3r/GUI/ConfigWizard.cpp:1987
#: src/libslic3r/PrintConfig.cpp:435 src/libslic3r/PrintConfig.cpp:1269
#: src/libslic3r/PrintConfig.cpp:1324 src/libslic3r/PrintConfig.cpp:2986
#: src/libslic3r/PrintConfig.cpp:3763
msgid "°C"
msgstr "°C"

#: src/slic3r/GUI/ConfigWizard.cpp:1982
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1983
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1986
msgid "Bed Temperature"
msgstr "Alustan lämpötila"

#: src/slic3r/GUI/ConfigWizard.cpp:2459 src/slic3r/GUI/ConfigWizard.cpp:3416
msgid "SLA Materials"
msgstr "SLA Materiaalit"

#: src/slic3r/GUI/ConfigWizard.cpp:2513
msgid "FFF Technology Printers"
msgstr "FFF  teknologian tulostimet"

#: src/slic3r/GUI/ConfigWizard.cpp:2518
msgid "SLA Technology Printers"
msgstr "SLA teknologian tulostimet"

#: src/slic3r/GUI/ConfigWizard.cpp:2767
#, boost-format
msgid ""
"Following printer profiles has no default filament: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2768
#, boost-format
msgid ""
"Following printer profiles has no default material: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2932
msgid "The following FFF printer models have no filament selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2936
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2950
msgid "The following SLA printer models have no materials selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2954
msgid "Do you want to select default SLA materials for these printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2996
msgid "Configuration is edited in ConfigWizard"
msgstr "Konfiguraatiota on muokattu ConfigWizardissa"

#: src/slic3r/GUI/ConfigWizard.cpp:3049
msgid "All user presets will be deleted."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3086
msgid "A new vendor was installed and one of its printers will be activated"
msgid_plural ""
"New vendors were installed and one of theirs printers will be activated"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/ConfigWizard.cpp:3118
msgid "Do you want to continue changing the configuration?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3185
msgid "A new Printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3190
msgid "Some Printers were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3211
msgid "A new filament was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3212
msgid "A new SLA material was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3225
msgid "Some filaments were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3225
msgid "Some SLA materials were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3269
msgid "Custom printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3359
msgid "Select all standard printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3362
msgid "< &Back"
msgstr "< &Takaisin"

#: src/slic3r/GUI/ConfigWizard.cpp:3363
msgid "&Next >"
msgstr "&Seuraava >"

#: src/slic3r/GUI/ConfigWizard.cpp:3364
msgid "&Finish"
msgstr "&Valmis"

#: src/slic3r/GUI/ConfigWizard.cpp:3365
#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:657
#: src/slic3r/GUI/FileArchiveDialog.cpp:277
#: src/slic3r/GUI/FileArchiveDialog.cpp:286
#: src/slic3r/GUI/FirmwareDialog.cpp:153
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1817
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2180
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2269
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1364
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:96
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:909
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1611
msgid "Cancel"
msgstr "Peruuta"

#: src/slic3r/GUI/ConfigWizard.cpp:3385
msgid "Prusa FFF Technology Printers"
msgstr "Prusa FFF teknologian tulostimet"

#: src/slic3r/GUI/ConfigWizard.cpp:3393
msgid "Prusa MSLA Technology Printers"
msgstr "Prusa MSLA teknologian tulostimet"

#: src/slic3r/GUI/ConfigWizard.cpp:3413
msgid "Filament Profiles Selection"
msgstr "Filamenttiprofiilien valinta"

#: src/slic3r/GUI/ConfigWizard.cpp:3413 src/slic3r/GUI/ConfigWizard.cpp:3416
#: src/slic3r/GUI/GUI_ObjectList.cpp:4369
msgid "Type:"
msgstr "Tyyppi:"

#: src/slic3r/GUI/ConfigWizard.cpp:3416
msgid "SLA Material Profiles Selection"
msgstr "SLA materiaaliprofiilin valinta"

#: src/slic3r/GUI/ConfigWizard.cpp:3539
msgid "Configuration Assistant"
msgstr "Konfiguraatioavustaja"

#: src/slic3r/GUI/ConfigWizard.cpp:3540
msgid "Configuration &Assistant"
msgstr "Konfiguraation &avustaja"

#: src/slic3r/GUI/ConfigWizard.cpp:3542
msgid "Configuration Wizard"
msgstr "Konfiguraation asettaminen"

#: src/slic3r/GUI/ConfigWizard.cpp:3543
msgid "Configuration &Wizard"
msgstr "Konfiguraation &asettaminen"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232
msgid ""
"Performing desktop integration failed - boost::filesystem::canonical did not "
"return appimage path."
msgstr ""
"Työpöytäintegraation suorittaminen epäonnistui - boost::filesystem::"
"canonical ei palauttanut appimagen tiedostopolkua."

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243
msgid "Performing desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:383
msgid ""
"Performing desktop integration failed because the application directory was "
"not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:423
msgid ""
"Performing desktop integration failed - could not create Gcodeviewer desktop "
"file. PrusaSlicer desktop file was probably created successfully."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:472
msgid ""
"Performing downloader desktop integration failed - boost::filesystem::"
"canonical did not return appimage path."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:484
msgid ""
"Performing downloader desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:602
msgid ""
"Performing downloader desktop integration failed because the application "
"directory was not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:626
#: src/slic3r/GUI/GUI_App.cpp:2402
msgid "Desktop Integration"
msgstr "Työpöytäintegraatio"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:633
msgid ""
"Desktop Integration sets this binary to be searchable by the system.\n"
"\n"
"Press \"Perform\" to proceed."
msgstr ""
"Työpöytäintegraatio asettaa tämän binäärin järjestelmän haettavaksi.\n"
"\n"
"Paina \"Suorita\" jatkaaksesi."

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:647
msgid "Perform"
msgstr "Suorita"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:653
#: src/slic3r/GUI/GLCanvas3D.cpp:5506 src/slic3r/GUI/KBShortcutsDialog.cpp:106
#: src/slic3r/GUI/MainFrame.cpp:1426
msgid "Undo"
msgstr "Peru"

#: src/slic3r/GUI/DoubleSlider.cpp:109
msgid "Place bearings in slots and resume printing"
msgstr "Aseta laakerit uriin ja jatka tulostusta"

#: src/slic3r/GUI/DoubleSlider.cpp:711 src/libslic3r/Utils.cpp:1015
#, boost-format
msgid "%1%d"
msgstr "%1%d"

#: src/slic3r/GUI/DoubleSlider.cpp:712 src/libslic3r/Utils.cpp:1016
#, boost-format
msgid "%1%h"
msgstr "%1%h"

#. TRN "m" means "minutes"
#: src/slic3r/GUI/DoubleSlider.cpp:713 src/libslic3r/Utils.cpp:1018
#, boost-format
msgid "%1%m"
msgstr "%1%m"

#: src/slic3r/GUI/DoubleSlider.cpp:714 src/libslic3r/Utils.cpp:1026
#, boost-format
msgid "%1%s"
msgstr "%1%s"

#: src/slic3r/GUI/DoubleSlider.cpp:1448
msgid "One layer mode"
msgstr "Yhden kerroksen tila"

#: src/slic3r/GUI/DoubleSlider.cpp:1450
msgid "Discard all custom changes"
msgstr "Hylkää kaikki mukautukset"

#: src/slic3r/GUI/DoubleSlider.cpp:1454 src/slic3r/GUI/DoubleSlider.cpp:2324
msgid "Jump to move"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1457
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"Set ruler mode\n"
"or Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1460
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"or Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1465
msgid "Edit current color - Right click the colored slider segment"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1467
msgid "This is wipe tower layer"
msgstr "Tämä on pyyhkäisytornin kerros"

#: src/slic3r/GUI/DoubleSlider.cpp:1477
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing sequentually."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1481
msgid "Print mode"
msgstr "Tulostustila"

#: src/slic3r/GUI/DoubleSlider.cpp:1495
msgid "Add extruder change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1497
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1499
msgid "Add color change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1500
msgid "or press \"+\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1502
msgid "Add another code - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1503
msgid "Add another code - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1509
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1527
msgid "continue"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1535
#, boost-format
msgid "Color change (\"%1%\")"
msgstr "Värinvaihto (\"%1%\")"

#: src/slic3r/GUI/DoubleSlider.cpp:1536
#, boost-format
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1538
#, boost-format
msgid "Pause print (\"%1%\")"
msgstr "Pysäytä tuloste (\"%1%\")"

#: src/slic3r/GUI/DoubleSlider.cpp:1540
#, boost-format
msgid "Custom template (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1542
#, boost-format
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1549
msgid "Note"
msgstr "Huomaa"

#: src/slic3r/GUI/DoubleSlider.cpp:1551
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1554
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1557
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1560
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1565
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1567
msgid "Edit tick mark - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1568
msgid "Edit tick mark - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1671 src/slic3r/GUI/DoubleSlider.cpp:1702
#: src/slic3r/GUI/GUI_Factories.cpp:870
#, c-format, boost-format
msgid "Extruder %d"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1672 src/slic3r/GUI/GUI_Factories.cpp:871
msgid "active"
msgstr "aktiivinen"

#: src/slic3r/GUI/DoubleSlider.cpp:1681
msgid "Switch code to Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1681 src/slic3r/GUI/GUI_Factories.cpp:832
msgid "Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1682
msgid "Change extruder (N/A)"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1684 src/slic3r/GUI/GUI_Factories.cpp:879
msgid "Use another extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1703
msgid "used"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1711
#, boost-format
msgid "Switch code to Color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1712
#, boost-format
msgid "Add color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2037
msgid "Add color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2048
msgid "Add pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2052
msgid "Add custom template"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2055
msgid "Add custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2073
msgid "Edit color"
msgstr "Muokkaa väriä"

#: src/slic3r/GUI/DoubleSlider.cpp:2074
msgid "Edit pause print message"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2075
msgid "Edit custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2081
msgid "Delete color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2082
msgid "Delete tool change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2083
msgid "Delete pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2084
msgid "Delete custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2094 src/slic3r/GUI/DoubleSlider.cpp:2324
msgid "Jump to height"
msgstr "Hyppää korkeuteen"

#: src/slic3r/GUI/DoubleSlider.cpp:2099
msgid "Hide ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2103
msgid "Show object height"
msgstr "Näytä objektin korkeus"

#: src/slic3r/GUI/DoubleSlider.cpp:2103
msgid "Show object height on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2107
msgid "Show estimated print time"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2107
msgid "Show estimated print time on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2111
msgid "Ruler mode"
msgstr "Mittatila"

#: src/slic3r/GUI/DoubleSlider.cpp:2111
msgid "Set ruler mode"
msgstr "Aseta mittatila"

#: src/slic3r/GUI/DoubleSlider.cpp:2116
msgid "Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2120
msgid "Set auto color changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2155
msgid "This action will cause deletion of all ticks on vertical slider."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2156 src/slic3r/GUI/Tab.cpp:1270
msgid ""
"This action is not revertible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2157
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2491
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:519
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:527
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:539
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1124 src/slic3r/GUI/GUI.cpp:258
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:716
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:746
#: src/slic3r/GUI/WipeTowerDialog.cpp:60 src/slic3r/GUI/WipeTowerDialog.cpp:445
msgid "Warning"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2285
msgid "Enter custom G-code used on current layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2286
#, boost-format
msgid "Custom G-code on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2307
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2308
#, boost-format
msgid "Message for pause print on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2323
msgid "Enter the move you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2323
msgid "Enter the height you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2584
msgid "The last color change data was saved for a single extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2585 src/slic3r/GUI/DoubleSlider.cpp:2601
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2587
msgid "Your current changes will delete all saved color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2588 src/slic3r/GUI/DoubleSlider.cpp:2609
msgid "Are you sure you want to continue?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2602
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2605
msgid "Do you want to delete all saved tool changes?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2607
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2608
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""

#: src/slic3r/GUI/Downloader.cpp:150
#, boost-format
msgid ""
"Download won't start. Download URL doesn't point to https://printables.com : "
"%1%"
msgstr ""

#: src/slic3r/GUI/Downloader.cpp:181
msgid "The download has failed"
msgstr ""

#. TRN %1% = file path
#: src/slic3r/GUI/DownloaderFileGet.cpp:194 src/slic3r/Utils/AppUpdater.cpp:224
#: src/slic3r/Utils/AppUpdater.cpp:269
#, boost-format
msgid "Can't create file at %1%"
msgstr ""

#: src/slic3r/GUI/ExtraRenderers.cpp:323 src/slic3r/GUI/GUI_ObjectList.cpp:582
#: src/slic3r/GUI/GUI_ObjectList.cpp:594 src/slic3r/GUI/GUI_ObjectList.cpp:1064
#: src/slic3r/GUI/GUI_ObjectList.cpp:2131
#: src/slic3r/GUI/GUI_ObjectList.cpp:3031
#: src/slic3r/GUI/GUI_ObjectList.cpp:4903
#: src/slic3r/GUI/ObjectDataViewModel.cpp:259 src/libslic3r/PrintConfig.cpp:892
msgid "default"
msgstr "oletus"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26
msgid "Set extruder sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46
msgid "Set extruder change for every"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60
#: src/libslic3r/PrintConfig.cpp:763 src/libslic3r/PrintConfig.cpp:1483
#: src/libslic3r/PrintConfig.cpp:2173 src/libslic3r/PrintConfig.cpp:2352
#: src/libslic3r/PrintConfig.cpp:2426 src/libslic3r/PrintConfig.cpp:2685
#: src/libslic3r/PrintConfig.cpp:2732 src/libslic3r/PrintConfig.cpp:2748
msgid "layers"
msgstr "kerrokset"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164
msgid "Random sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166
msgid "If enabled, random sequence of the selected extruders will be used."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172
msgid "Allow next color repetition"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174
msgid "If enabled, a repetition of the next random color will be allowed."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
msgid "Set extruder(tool) sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229
msgid "Remove extruder from sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239
msgid "Add extruder to sequence"
msgstr ""

#: src/slic3r/GUI/Field.cpp:188
msgid "default value"
msgstr "oletusarvo"

#: src/slic3r/GUI/Field.cpp:191
msgid "parameter name"
msgstr "parametrin nimi"

#: src/slic3r/GUI/Field.cpp:206 src/slic3r/GUI/OptionsGroup.cpp:852
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1077
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1089
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:229 src/slic3r/GUI/Field.cpp:302
#, c-format, boost-format
msgid "%s doesn't support percentage"
msgstr ""

#: src/slic3r/GUI/Field.cpp:269
#, c-format, boost-format
msgid ""
"Input value is out of range\n"
"Are you sure that %s is a correct value and that you want to continue?"
msgstr ""

#: src/slic3r/GUI/Field.cpp:272 src/slic3r/GUI/Field.cpp:348
msgid "Parameter validation"
msgstr ""

#: src/slic3r/GUI/Field.cpp:285 src/slic3r/GUI/Field.cpp:395
#: src/slic3r/GUI/Field.cpp:1597
msgid "Input value is out of range"
msgstr ""

#. TRN %1% = Value, %2% = units
#: src/slic3r/GUI/Field.cpp:345
#, boost-format
msgid ""
"Do you mean %1%%% instead of %1% %2%?\n"
"Select YES if you want to change this value to %1%%%, \n"
"or NO if you are sure that %1% %2% is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:402
#, boost-format
msgid ""
"Invalid input format. Expected vector of dimensions in the following format: "
"\"%1%\""
msgstr ""

#: src/slic3r/GUI/FileArchiveDialog.cpp:170
msgid "Archive preview"
msgstr ""

#: src/slic3r/GUI/FileArchiveDialog.cpp:273
#: src/slic3r/GUI/FileArchiveDialog.cpp:286
msgid "Open"
msgstr "Avaa"

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flash!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:154
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:201
msgid "Flashing failed"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing succeeded!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing failed. Please see the avrdude log below."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:285
msgid "Flashing cancelled."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:333
#, c-format, boost-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:420 src/slic3r/GUI/FirmwareDialog.cpp:455
#, c-format, boost-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:437
#, c-format, boost-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:549
#, c-format, boost-format
msgid "The %s device could not have been found"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:650
#, c-format, boost-format
msgid "Error accessing port at %s: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:652
#, c-format, boost-format
msgid "Error: %s"
msgstr "Virhe: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:787
msgid "Firmware flasher"
msgstr "Laiteohjelmiston lataaja"

#: src/slic3r/GUI/FirmwareDialog.cpp:812
msgid "Firmware image:"
msgstr "Laiteohjelmiston kuva:"

#: src/slic3r/GUI/FirmwareDialog.cpp:813
msgid "Select a file"
msgstr "Valitse tiedosto"

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Serial port:"
msgstr "Sarjaportti:"

#: src/slic3r/GUI/FirmwareDialog.cpp:819
msgid "Autodetected"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Rescan"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:827
msgid "Progress:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:830
msgid "Status:"
msgstr "Tila:"

#: src/slic3r/GUI/FirmwareDialog.cpp:831
msgid "Ready"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:851
msgid "Advanced: Output log"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:862
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:356
#: src/slic3r/GUI/Mouse3DController.cpp:543
#: src/slic3r/GUI/PrintHostDialogs.cpp:313
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:125
msgid "Close"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:915
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:916
msgid "Confirmation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:919
msgid "Cancelling..."
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1488
msgid "Shape Gallery"
msgstr "Muotogalleria"

#: src/slic3r/GUI/GalleryDialog.cpp:76
msgid "Select shape from the gallery"
msgstr "Valitse muoto galleriasta"

#: src/slic3r/GUI/GalleryDialog.cpp:114 src/slic3r/GUI/Tab.cpp:4564
msgid "Add"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:114
msgid "Add one or more custom shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:115 src/slic3r/GUI/GalleryDialog.cpp:528
#: src/slic3r/GUI/GLCanvas3D.cpp:5307 src/slic3r/GUI/GUI_Factories.cpp:460
#: src/slic3r/GUI/Tab.cpp:4160
msgid "Delete"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:115
msgid "Delete one or more custom shape. You can't delete system shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:142
msgid "Add to bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:142
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2178
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2265
msgid "OK"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:143
msgid "Add selected shape(s) to the bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:422
msgid "Choose one or more files (STL, OBJ):"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:462
#, boost-format
msgid ""
"It looks like selected %1%-file has an error or is destructed.\n"
"We can't load this file"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:473
msgid "Choose one PNG file:"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:486
msgid "Replacing of the PNG"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:530
msgid "Change thumbnail"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:571 src/slic3r/GUI/GalleryDialog.cpp:576
#, boost-format
msgid "Loading of the \"%1%\""
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:343
msgid "Tool position"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1550
msgid "Generating toolpaths"
msgstr "Luodaan työkalupolkuja"

#: src/slic3r/GUI/GCodeViewer.cpp:1622
msgid "Generating vertex buffer"
msgstr "Luodaan verteksipuskuria"

#: src/slic3r/GUI/GCodeViewer.cpp:1982
msgid "Generating index buffers"
msgstr "Luodaan indeksipuskuria"

#: src/slic3r/GUI/GCodeViewer.cpp:3276 src/libslic3r/PrintConfig.cpp:1171
msgid "g"
msgstr "g"

#: src/slic3r/GUI/GCodeViewer.cpp:3277 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:494
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:514
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1826
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1210
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1976
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:309
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:433
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:554
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:555
msgid "in"
msgstr "in"

#: src/slic3r/GUI/GCodeViewer.cpp:3278
msgctxt "Metre"
msgid "m"
msgstr "m"

#: src/slic3r/GUI/GCodeViewer.cpp:3289
msgid "Click to hide"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3289
msgid "Click to show"
msgstr "Napauta näyttääksesi"

#: src/slic3r/GUI/GCodeViewer.cpp:3462
msgid "up to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3468
msgid "above"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3476
msgid "from"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3476
msgid "to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3526 src/slic3r/GUI/GCodeViewer.cpp:3527
#: src/slic3r/GUI/GCodeViewer.cpp:3602
msgid "Percentage"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3537 src/slic3r/GUI/GCodeViewer.cpp:3580
msgid "Feature type"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3537 src/slic3r/GUI/GCodeViewer.cpp:3602
#: src/slic3r/GUI/RammingChart.cpp:90
msgid "Time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3581
msgid "Height (mm)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3582
msgid "Width (mm)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3583
msgid "Speed (mm/s)"
msgstr "Nopeus (mm/s)"

#: src/slic3r/GUI/GCodeViewer.cpp:3584
msgid "Fan speed (%)"
msgstr "Tuulettimen nopeus (%)"

#: src/slic3r/GUI/GCodeViewer.cpp:3585
msgid "Temperature (°C)"
msgstr "Lämpötila (°C)"

#: src/slic3r/GUI/GCodeViewer.cpp:3586
msgid "Volumetric flow rate (mm³/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3587
msgid "Layer time (linear)"
msgstr "Kerroksen aika (lineaarinen)"

#: src/slic3r/GUI/GCodeViewer.cpp:3588
msgid "Layer time (logarithmic)"
msgstr "Kerroksen aika (logaritminen)"

#: src/slic3r/GUI/GCodeViewer.cpp:3589
msgid "Tool"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3590
msgid "Color Print"
msgstr "Värituloste"

#: src/slic3r/GUI/GCodeViewer.cpp:3602 src/slic3r/GUI/GCodeViewer.cpp:3604
#: src/slic3r/GUI/GCodeViewer.cpp:3870
msgid "Used filament"
msgstr "Käytetty tulostuslanka"

#: src/slic3r/GUI/GCodeViewer.cpp:3633 src/slic3r/GUI/GCodeViewer.cpp:4080
#: src/libslic3r/PrintConfig.cpp:1470 src/libslic3r/PrintConfig.cpp:3080
msgid "Travel"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3650 src/slic3r/GUI/GCodeViewer.cpp:3695
#: src/slic3r/GUI/GCodeViewer.cpp:3699
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:74
#: src/slic3r/GUI/GUI_ObjectList.cpp:349 src/slic3r/GUI/Tab.cpp:1959
#: src/slic3r/GUI/wxExtensions.cpp:510 src/libslic3r/PrintConfig.cpp:886
msgid "Extruder"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3672
msgid "Default color"
msgstr "Oleusväri"

#: src/slic3r/GUI/GCodeViewer.cpp:3695
msgid "default color"
msgstr "oleusväri"

#: src/slic3r/GUI/GCodeViewer.cpp:3795 src/slic3r/GUI/GCodeViewer.cpp:3851
msgid "Color change"
msgstr "Värinvaihto"

#: src/slic3r/GUI/GCodeViewer.cpp:3814 src/slic3r/GUI/GCodeViewer.cpp:3849
msgid "Print"
msgstr "Tulosta"

#: src/slic3r/GUI/GCodeViewer.cpp:3850 src/slic3r/GUI/GCodeViewer.cpp:3884
msgid "Pause"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3867 src/slic3r/GUI/GCodeViewer.cpp:3870
msgid "Event"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3867 src/slic3r/GUI/GCodeViewer.cpp:3870
msgid "Remaining time"
msgstr "Jäljellä oleva aika"

#: src/slic3r/GUI/GCodeViewer.cpp:3867 src/slic3r/GUI/GCodeViewer.cpp:3870
msgid "Duration"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3938 src/slic3r/GUI/GUI.cpp:332
#: src/slic3r/GUI/Plater.cpp:855 src/libslic3r/PrintConfig.cpp:332
msgid "Printer"
msgstr "Tulostin"

#: src/slic3r/GUI/GCodeViewer.cpp:3941 src/slic3r/GUI/GUI.cpp:328
#: src/slic3r/GUI/Plater.cpp:851
msgid "Print settings"
msgstr "Tulostusasetukset"

#: src/slic3r/GUI/GCodeViewer.cpp:3946 src/slic3r/GUI/GUI.cpp:330
#: src/slic3r/GUI/Plater.cpp:852 src/slic3r/GUI/Tab.cpp:1998
#: src/slic3r/GUI/Tab.cpp:1999
msgid "Filament"
msgstr "Tulostuslanka"

#: src/slic3r/GUI/GCodeViewer.cpp:3961
msgid "Hide Custom G-code"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3961
msgid "Show Custom G-code"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3974
msgid "Estimated printing times"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3993
msgid "Normal mode"
msgstr "Normaalitila"

#: src/slic3r/GUI/GCodeViewer.cpp:3994
msgid "Stealth mode"
msgstr "Hiljainen tila"

#: src/slic3r/GUI/GCodeViewer.cpp:4003 src/libslic3r/PrintConfig.cpp:1247
#: src/libslic3r/PrintConfig.cpp:1265 src/libslic3r/PrintConfig.cpp:1275
#: src/libslic3r/PrintConfig.cpp:1320
msgid "First layer"
msgstr "Ensimmäisen kerros"

#: src/slic3r/GUI/GCodeViewer.cpp:4007
msgid "Total"
msgstr "Yhteensä"

#: src/slic3r/GUI/GCodeViewer.cpp:4026
msgid "Show stealth mode"
msgstr "Näytä hiljainen tila"

#: src/slic3r/GUI/GCodeViewer.cpp:4030
msgid "Show normal mode"
msgstr "Näytä normaalitila"

#: src/slic3r/GUI/GCodeViewer.cpp:4084
msgid "Wipe"
msgstr "Pyyhi"

#: src/slic3r/GUI/GCodeViewer.cpp:4088
msgid "Retractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4092
msgid "Deretractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4096
msgid "Seams"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4100
msgid "Tool changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4104
msgid "Color changes"
msgstr "Värinvaihdot"

#: src/slic3r/GUI/GCodeViewer.cpp:4108
msgid "Print pauses"
msgstr "Tulostuksen tauot"

#: src/slic3r/GUI/GCodeViewer.cpp:4112
msgid "Custom G-codes"
msgstr "Mukautetut G-koodit"

#: src/slic3r/GUI/GCodeViewer.cpp:4116
msgid "Center of gravity"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4121
msgid "Shells"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4126
msgid "Tool marker"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:189 src/slic3r/GUI/GLCanvas3D.cpp:5453
#: src/slic3r/GUI/ObjectDataViewModel.cpp:71
msgid "Variable layer height"
msgstr "Muuttuva kerroskorkeus"

#: src/slic3r/GUI/GLCanvas3D.cpp:191
msgid "Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:193
msgid "Add detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:195
msgid "Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:197
msgid "Remove detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:199
msgid "Shift + Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:201
msgid "Reset to base"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:203
msgid "Shift + Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:205
msgid "Smoothing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:207
msgid "Mouse wheel:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:209
msgid "Increase/decrease edit area"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:212
msgid "Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:218
msgid "Quality / Speed"
msgstr "Laatu / Nopeus"

#: src/slic3r/GUI/GLCanvas3D.cpp:221
msgid "Higher print quality versus higher print speed."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:232
msgid "Smooth"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:238 src/libslic3r/PrintConfig.cpp:906
msgid "Radius"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:250
msgid "Keep min"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:259 src/slic3r/GUI/GLCanvas3D.cpp:4878
msgid "Reset"
msgstr "Nollaa"

#: src/slic3r/GUI/GLCanvas3D.cpp:621
msgid "Variable layer height - Manual edit"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:736
msgid "Seq."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1305
msgid "SLA view"
msgstr "SLA-näkymä"

#: src/slic3r/GUI/GLCanvas3D.cpp:1324
msgid "Show as processed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1325
msgid "Show as original"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1758
msgid "Variable layer height - Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1766
msgid "Variable layer height - Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1774
msgid "Variable layer height - Smooth all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2231
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3127 src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:78
msgid "Gizmo-Move"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3219
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:583
msgid "Gizmo-Rotate"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3861
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4113
#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:33
msgid "Gizmo-Place on Face"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4497 src/slic3r/GUI/GLCanvas3D.cpp:5413
msgid "Switch to Settings"
msgstr "Vaihda asetuksiin"

#: src/slic3r/GUI/GLCanvas3D.cpp:4498 src/slic3r/GUI/GLCanvas3D.cpp:5413
msgid "Print Settings Tab"
msgstr "Tulostusasetuksien sivu"

#: src/slic3r/GUI/GLCanvas3D.cpp:4499 src/slic3r/GUI/GLCanvas3D.cpp:5414
msgid "Filament Settings Tab"
msgstr "Tulostuslangan asetusten sivu"

#: src/slic3r/GUI/GLCanvas3D.cpp:4499 src/slic3r/GUI/GLCanvas3D.cpp:5414
msgid "Material Settings Tab"
msgstr "Materiaaliasetusten sivu"

#: src/slic3r/GUI/GLCanvas3D.cpp:4500 src/slic3r/GUI/GLCanvas3D.cpp:5415
msgid "Printer Settings Tab"
msgstr "Tulostimen asetuksien sivu"

#: src/slic3r/GUI/GLCanvas3D.cpp:4717
msgid "Undo History"
msgstr "Nollaa historia"

#: src/slic3r/GUI/GLCanvas3D.cpp:4717
msgid "Redo History"
msgstr "Tee uudelleen historia"

#: src/slic3r/GUI/GLCanvas3D.cpp:4737
#, c-format, boost-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4737
#, c-format, boost-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4756 src/slic3r/GUI/GLCanvas3D.cpp:5431
#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Search.cpp:482
msgid "Search"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4770 src/slic3r/GUI/GLCanvas3D.cpp:4778
#: src/slic3r/GUI/Search.cpp:488
msgid "Enter a search term"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4810
msgid "Arrange options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4845
#, boost-format
msgid "Press %1%left mouse button to enter the exact value"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4847
msgid "Spacing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4854
msgid "Spacing from bed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4861
msgid "Enable rotations (slow)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Alignment"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870 src/libslic3r/PrintConfig.cpp:4761
msgid "Center"
msgstr "Keskikohta"

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Rear left"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Front left"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Front right"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Rear right"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870 src/libslic3r/PrintConfig.cpp:2305
msgid "Random"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4897 src/slic3r/GUI/GLCanvas3D.cpp:5325
#: src/slic3r/GUI/KBShortcutsDialog.cpp:141 src/slic3r/GUI/Plater.cpp:7196
msgid "Arrange"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5299
msgid "Add..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5316 src/slic3r/GUI/KBShortcutsDialog.cpp:105
#: src/slic3r/GUI/Plater.cpp:6062 src/slic3r/GUI/Tab.cpp:4570
msgid "Delete all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5325 src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5325
msgid "Click right mouse button to show arrangement options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5345
msgid "Copy"
msgstr "Kopioi"

#: src/slic3r/GUI/GLCanvas3D.cpp:5354
msgid "Paste"
msgstr "Liitä"

#: src/slic3r/GUI/GLCanvas3D.cpp:5366 src/slic3r/GUI/GUI_Factories.cpp:1246
#: src/slic3r/GUI/GUI_Factories.cpp:1270 src/slic3r/GUI/GUI_Factories.cpp:1281
msgid "Add instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5377 src/slic3r/GUI/GUI_Factories.cpp:1249
msgid "Remove instance"
msgstr "Poista ilmentymä"

#: src/slic3r/GUI/GLCanvas3D.cpp:5390
msgid "Split to objects"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5400
msgid "Split to parts"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5506 src/slic3r/GUI/GLCanvas3D.cpp:5543
msgid "Click right mouse button to open/close History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5528
#, boost-format
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5543 src/slic3r/GUI/KBShortcutsDialog.cpp:107
#: src/slic3r/GUI/MainFrame.cpp:1429
msgid "Redo"
msgstr "Tee uudelleen"

#: src/slic3r/GUI/GLCanvas3D.cpp:5564
#, boost-format
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7459
msgid "An object outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7460
msgid "A toolpath outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7461
msgid "SLA supports outside the print area were detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7462
msgid "Some objects are not visible during editing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7464
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7539
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7554
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:190
msgid "Auto"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:190
msgid "Manual"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
msgid "Plug"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194
msgid "Dowel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:202
msgid "Prism"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:202
msgid "Frustum"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
msgid "Triangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
msgid "Square"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
msgid "Hexagon"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
msgid "Circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:213
msgid "Keep orientation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:214
msgid "Place on cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:215
msgid "Flip upside down"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:219
msgid "Connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:220
msgid "Type"
msgstr "Tyyppi"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:221 src/libslic3r/PrintConfig.cpp:2836
msgid "Style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:223
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:875
msgid "Depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:238
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2022
#: src/slic3r/GUI/GUI_ObjectList.cpp:4155
#: src/slic3r/GUI/GUI_ObjectList.cpp:4347
msgid "Part"
msgstr "Osa"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:238
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2022
msgid "Object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:253
msgid ""
"Click to flip the cut plane\n"
"Drag to move the cut plane\n"
"Right-click a part to assign it to the other side"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:259 src/libslic3r/PrintConfig.cpp:495
#: src/libslic3r/PrintConfig.cpp:1189 src/libslic3r/PrintConfig.cpp:2324
#: src/libslic3r/PrintConfig.cpp:2334 src/libslic3r/PrintConfig.cpp:2633
#: src/libslic3r/PrintConfig.cpp:2867 src/libslic3r/PrintConfig.cpp:2887
#: src/libslic3r/PrintConfig.cpp:2899 src/libslic3r/PrintConfig.cpp:2936
#: src/libslic3r/PrintConfig.cpp:3184 src/libslic3r/PrintConfig.cpp:3200
#: src/libslic3r/PrintConfig.cpp:3305 src/libslic3r/PrintConfig.cpp:3540
#: src/libslic3r/PrintConfig.cpp:4029
msgid "°"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:383
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:557
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1205
msgid "Move cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:530
msgid "Value"
msgstr "Arvo"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:535
msgid "Tolerance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:823
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:826
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:827
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
msgid "Left click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:823
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2821
msgid "Add connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:824
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
msgid "Right click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:824
msgid "Remove connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:825
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271
msgid "Drag"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:825
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1189
msgid "Move connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:826
msgid "Add connector to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:827
msgid "Remove connector from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:828
msgid "Select all connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:852 src/libslic3r/PrintConfig.cpp:4739
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1200
msgid "Rotate cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1765
msgid "Remove connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1810
msgid "Confirm connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1879
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1918
msgid "Flip cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1962
msgid "Hold SHIFT key to draw a cut line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1968
msgid "Cut position"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1977
msgid "Reset cutting plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1989
msgid "Edit connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1989
msgid "Add connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1996
msgid "Reset cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1997
msgid "Reset cutting plane and remove connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2052
msgid "Cut result"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2072
msgid "Cut into"
msgstr ""

#. TRN CutGizmo: RadioButton Cut into ...
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2079
msgid "Objects"
msgstr ""

#. TRN CutGizmo: RadioButton Cut into ...
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2083
msgid "Parts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2097
msgid "Perform cut"
msgstr "Suorita leikkuu"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2195
msgid "Invalid connectors detected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2197
#, c-format, boost-format
msgid "%1$d connector is out of cut contour"
msgid_plural "%1$d connectors are out of cut contour"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2200
#, c-format, boost-format
msgid "%1$d connector is out of object"
msgid_plural "%1$d connectors are out of object"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2203
msgid "Some connectors are overlapped"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2207
msgid "Select at least one object to keep after cutting."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2209
msgid "Cut plane is placed out of object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2446
msgid "Connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2487
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2796
msgid "Cut by line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2847
msgid "Delete connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:296
msgid "Entering Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:297
msgid "Leaving Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:298
msgid "Cut gizmo editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:358
msgid "Embossed text"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:572
msgid "Emboss"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:833
msgid "Text-Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:873
msgid "Font"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:874
#: src/libslic3r/PrintConfig.cpp:895
msgid "Height"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:884
msgid "Use surface"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:885
msgid "Char gap"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:886
msgid "Line gap"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:887
msgid "Boldness"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:888
msgid "Skew ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:889
msgid "From surface"
msgstr "Pinnalta"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:890
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:203
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:607
#: src/slic3r/GUI/Mouse3DController.cpp:478
#: src/slic3r/GUI/Mouse3DController.cpp:499
msgid "Rotation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:892
msgid "Collection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:966
msgid "NORMAL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:967
msgid "SMALL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:968
msgid "ITALIC"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:969
msgid "SWISS"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:970
msgid "MODERN"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1006
msgid "First font"
msgstr "Ensimmäinen fontti"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1011
msgid "Default font"
msgstr "Oletusfontti"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1343
#: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1444
#: src/slic3r/GUI/Tab.cpp:1479 src/slic3r/GUI/Tab.cpp:1619
#: src/slic3r/GUI/Tab.cpp:1623 src/slic3r/GUI/Tab.cpp:2069
#: src/slic3r/GUI/Tab.cpp:2537 src/slic3r/GUI/Tab.cpp:5188
#: src/libslic3r/PrintConfig.cpp:273 src/libslic3r/PrintConfig.cpp:511
#: src/libslic3r/PrintConfig.cpp:1491 src/libslic3r/PrintConfig.cpp:1573
#: src/libslic3r/PrintConfig.cpp:1620 src/libslic3r/PrintConfig.cpp:2582
#: src/libslic3r/PrintConfig.cpp:2592 src/libslic3r/PrintConfig.cpp:3240
#: src/libslic3r/PrintConfig.cpp:3274 src/libslic3r/PrintConfig.cpp:3285
#: src/libslic3r/PrintConfig.cpp:3300 src/libslic3r/PrintConfig.cpp:3313
#: src/libslic3r/PrintConfig.cpp:3322 src/libslic3r/PrintConfig.cpp:3334
#: src/libslic3r/PrintConfig.cpp:3716
msgid "Advanced"
msgstr "Kehittynyt tila"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1444
msgid ""
"The text cannot be written using the selected font. Please try choosing a "
"different font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1453
msgid "Embossed text cannot contain only white spaces."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1455
msgid "Text contains character glyph (represented by '?') unknown by font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1458
msgid "Text input doesn't show font skew."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1459
msgid "Text input doesn't show font boldness."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1461
msgid "Text input doesn't show gap between lines."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1465
msgid "Too tall, diminished font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1467
msgid "Too small, enlarged font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1774
msgid "No symbol"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1775
#: src/slic3r/GUI/GUI_ObjectList.cpp:1608 src/slic3r/GUI/Plater.cpp:2444
msgid "Loading"
msgstr "Ladataan"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1825
msgid "Queue"
msgstr "Jono"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1881
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:676
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:365
msgid "Apply"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1899
msgid "Revert font changes."
msgstr "Nollaa fonttimuutokset."

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2003
#, boost-format
msgid "Font \"%1%\" can't be selected."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2077
msgid "Operation"
msgstr ""

#. TRN EmbossOperation
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2092
msgid "Join"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2095
msgid "Click to change text into object part."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2098
#: src/slic3r/GUI/GUI_ObjectList.cpp:4337
msgid "You can't change a type of the last solid part of the object."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2099
msgctxt "EmbossOperation"
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2105
msgid "Click to change part type into negative volume."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2111
#: src/slic3r/GUI/GUI_ObjectList.cpp:4354
msgid "Modifier"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2117
msgid "Click to change part type into modifier."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2124
msgid "Change Text Type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2155
#, boost-format
msgid "Rename style(%1%) for embossing text"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2167
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2252
msgid "Name can't be empty."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2169
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2254
msgid "Name has to be unique."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2205
msgid "Rename style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2212
msgid "Rename current style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2213
msgid "Can't rename temporary style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2230
msgid "First Add style to list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2232
#, boost-format
msgid "Save %1% style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2234
msgid "No changes to save."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2241
msgid "New name of style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2290
msgid "Save as new style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2302
msgid "Only valid font can be added to style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2304
msgid "Add style to my list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2306
msgid "Save as new style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2324
msgid "Remove style"
msgstr "Poista tyyli"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2335
msgid "Can't remove the last existing style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2348
#, boost-format
msgid "Are you sure you want to permanently remove the \"%1%\" style?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2368
#, boost-format
msgid "Delete \"%1%\" style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2369
#, boost-format
msgid "Can't delete \"%1%\". It is last style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2370
#, boost-format
msgid "Can't delete temporary style \"%1%\"."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2419
msgid "Styles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2481
#, boost-format
msgid "Modified style \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2482
#, boost-format
msgid "Current style is \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2490
#, boost-format
msgid ""
"Changing style to \"%1%\" will discard current style modification.\n"
"\n"
"Would you like to continue anyway?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2506
msgid "Not valid style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2507
#, boost-format
msgid "Style \"%1%\" can't be used and will be removed from a list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2553
msgid "Unset italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2570
msgid "Set italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2599
msgid "Unset bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2617
msgid "Set bold"
msgstr "Aseta lihavoitu"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2772
msgid "Revert text size."
msgstr "Nollaa tekstin koko."

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2795
msgid "Revert embossed depth."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2905
msgid ""
"Advanced options cannot be changed for the selected font.\n"
"Select another font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2946
msgid "Revert using of model surface."
msgstr ""

#. TRN EmbossGizmo: font units
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2959
msgid "points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2968
msgid "Revert gap between characters"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2969
msgid "Distance between characters"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2984
msgid "Revert gap between lines"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2985
msgid "Distance between lines"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2999
msgid "Undo boldness"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3000
msgid "Tiny / Wide glyphs"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3010
msgid "Undo letter's skew"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3011
msgid "Italic strength ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3030
msgid "Undo translation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3031
msgid "Distance of the center of the text to the model surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3076
msgid "Undo rotation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3078
msgid "Rotate text Clock-wise."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3113
msgid "Unlock the text's rotation when moving text along the object's surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3114
msgid "Lock the text's rotation when moving text along the object's surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3137
msgid "Select from True Type Collection."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3146
msgid "Set text to face camera"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3153
msgid "Orient the text towards the camera."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3303
msgid "Choose SVG file"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3351
#, boost-format
msgid ""
"Can't load exactly same font(\"%1%\"). Aplication selected a similar "
"one(\"%2%\"). You have to specify font for enable edit text."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:80
msgid "Enter emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:81
msgid "Leave emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:82
msgid "Embossing actions"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:38
#: src/slic3r/GUI/ObjectDataViewModel.cpp:66
msgid "Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
msgid "Automatic painting"
msgstr ""

#. TRN GizmoFdmSupports : message line during the waiting for autogenerated supports
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
msgid "painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:107
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
msgid "Clipping of view"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:106
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
msgid "Reset direction"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:108
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
msgid "Brush size"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:109
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
msgid "Brush shape"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1815
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:110
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
msgid "Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
msgid "Enforce supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
msgid "Right mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:575
msgid "Block supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
msgid "Shift + Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:59
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:570
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:247
msgid "Remove selection"
msgstr "Poista valinta"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
msgid "Remove all selection"
msgstr "Poista kaikki valinnat"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Sphere"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:63
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:106
#: src/libslic3r/PrintConfig.cpp:1229
msgid "Triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
msgid "Highlight overhang by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:65
msgid "Enforce"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:68
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
msgid "Tool type"
msgstr "Työkalun tyyppi"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:69
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
msgid "Brush"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:70
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123
msgid "Smart fill"
msgstr "Älykäs täyttö"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:72
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
msgid "Smart fill angle"
msgstr "Älykäs täyttökulma"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:74
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
msgid "Split triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:75
msgid "On overhangs only"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:189
#, boost-format
msgid ""
"Preselects faces by overhang angle. It is possible to restrict paintable "
"facets to only preselected faces when the option \"%1%\" is enabled."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:232
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:378
msgid "Paints facets according to the chosen painting brush."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:240
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:391
msgid ""
"Paints neighboring facets whose relative angle is less or equal to set angle."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:244
#, boost-format
msgid "Allows painting only on facets selected by: \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:259
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:419
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141
msgid "Paints all facets inside, regardless of their orientation."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:268
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:428
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:149
msgid "Ignores facets facing away from the camera."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:277
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:437
msgid "Paints only one facet."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:285
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:300
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:445
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:462
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:129
msgid "Alt + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:290
msgid "Splits bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:323
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:483
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:167
msgid "Ctrl + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:328
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:488
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:172
msgid "Reset selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:380
msgid "Block supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:381
msgid "Add supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:519
msgid "Automatic painting requires valid print setup."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:527
msgid "Automatic painting requires printable object."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:537
msgid "Automatic painting will erase all currently painted areas."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:538
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1123
msgid "Are you sure you want to do it?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:542
msgid "Automatic painting support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:573
msgid "Add supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:24
msgid "Entering Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:25
msgid "Leaving Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:26
msgid "Paint-on supports editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:75
msgid "Place on face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:29
msgid "Hollow this object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30
msgid "Preview hollowed and drilled model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31
msgid "Offset"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32
msgid "Quality"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33
#: src/libslic3r/PrintConfig.cpp:4115
msgid "Closing distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
msgid "Hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
msgid "Hole depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
msgid "Remove selected holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
msgid "Remove all holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
msgid "Show supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:240
msgid "Add drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:359
msgid "Delete drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:653
msgid "Hollowing parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:737
msgid "Change drainage hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:839
msgid "Hollow and drill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:881
msgid "Move drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:64
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:75
msgid "Vertex"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:65
msgid "Edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:67
msgid "Plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:76
msgid "Point on edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:77
msgid "Point on circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:78
msgid "Point on plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:88
msgid "Center of edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:89
msgid "Center of circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:553
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2035
msgid "Measure"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1235
msgid "Edit to scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1257
#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:118
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:217
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:653
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:670
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:680
#: src/libslic3r/PrintConfig.cpp:4808
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1361
msgctxt "Verb"
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1823
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1850
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1856
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1885
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1892
msgid "Unselect feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1829
msgid "Unselect center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1834
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1861
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1897
msgid "Select center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1839
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1866
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1902
msgid "Unselect point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1845
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1872
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1877
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1909
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1914
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1922
msgid "Select feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1877
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1914
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1922
msgid "Select point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1939
msgid "Enable point selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1944
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2013
msgid "Restart selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1954
msgid "Unselect"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2000
#: src/libslic3r/PrintConfig.cpp:2223 src/libslic3r/PrintConfig.cpp:2231
msgid "Length"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2005
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2007
msgid "Selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2027
#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Copy to clipboard"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2044
msgid "Angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2058
msgid "Perpendicular distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2058
msgid "Distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2068
msgid "Direct distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2078
msgid "Distance XYZ"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:164
msgid "Entering Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:165
msgid "Leaving Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:166
msgid "Measure gizmo editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:28
#, boost-format
msgid ""
"Your printer has more extruders than the multi-material painting gizmo "
"supports. For this reason, only the first %1% extruders will be able to be "
"used for painting."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:46
#: src/slic3r/GUI/ObjectDataViewModel.cpp:69
msgid "Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
msgid "First color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113
msgid "Second color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:649
msgid "Remove painted color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
msgid "Clear all"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
msgid "Bucket fill"
msgstr ""

#. TRN Means "current color"
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:340
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:356
msgid "Current"
msgstr ""

#. TRN Means "original color"
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:342
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:356
msgid "Original"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:404
msgid "Paints neighboring facets that have the same color."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:450
msgid "Split bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:652
#, boost-format
msgid "Painted using: Extruder %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:120
msgid "Entering Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:121
msgid "Leaving Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:122
msgid "Multimaterial painting editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:58
msgid "Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:565
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:639
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:679
#: src/libslic3r/PrintConfig.cpp:4793
msgid "Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:629
msgid "Optimize orientation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:140
msgid "Gizmo-Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:250
msgid "Enforce seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:252
msgid "Block seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52
msgid "Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:25
msgid "Entering Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:26
msgid "Leaving Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:27
msgid "Paint-on seam editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:105
msgid "Mesh name"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:107
msgid "Level of detail"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:108
msgid "Decimate ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:147
#, boost-format
msgid ""
"Processing model \"%1%\" with more than 1M triangles could be slow. It is "
"highly recommended to reduce amount of triangles."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:150
#: src/slic3r/GUI/GUI_Factories.cpp:797
msgid "Simplify model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:177
msgid "Simplify"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:190
msgid "Simplification is currently only allowed when a single part is selected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:191
#: src/slic3r/GUI/MainFrame.cpp:1246 src/slic3r/GUI/MainFrame.cpp:1717
#: src/slic3r/GUI/PrintHostDialogs.cpp:425
msgid "Error"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:294
msgid "Extra high"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:295
msgid "High"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:296
msgid "Medium"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:297
msgid "Low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:298
msgid "Extra low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:321
msgid ""
"A multipart object can be simplified using only a Level of detail. If you "
"want to enter a Decimate ratio, do the simplification separately."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:350
#, c-format, boost-format
msgid "%d triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:353
msgid "Show wireframe"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:359
msgid "Operation already cancelling. Please wait few seconds."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:368
msgid "Can't apply when proccess preview."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:375
#, boost-format
msgid "Process %1% / 100"
msgstr ""

#. TRN %1% = volumes name
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:541
#, boost-format
msgid "Simplify %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:542
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"simplifying the mesh."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:68
msgid "Entering SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:69
msgid "Leaving SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:36
msgid "Head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:37
msgid "Lock supports under new islands"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1273
msgid "Remove selected points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39
msgid "Remove all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1276
msgid "Apply changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1277
msgid "Discard changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42
msgid "Minimal points distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43
#: src/libslic3r/PrintConfig.cpp:3945
msgid "Support points density"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1279
msgid "Auto-generate points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
msgid "Manual editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:313
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:466
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:632
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:702
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:818
msgid "SLA Support Points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:823
msgid "Do you want to save your manually edited support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:824
msgid "Save support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:885
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:992
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1122
msgid "Autogeneration will erase all manually edited points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
msgid "SLA gizmo keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1247
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265
msgid "Add point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
msgid "Remove point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
msgid "Move point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
msgid "Add point to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
msgid "Remove point from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
msgid "Select by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271
msgid "Deselect by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1272
msgid "Select all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1274
msgid "Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1274
msgid "Move clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1275
msgid "Reset clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1278
msgid "Switch to editing mode"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:205
msgid ""
"ERROR: Please close all manipulators available from the left toolbar first"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1011
msgid ""
"You are currently editing SLA support points. Please, apply or discard your "
"changes first."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:287
msgid "Undefined"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:308
#, boost-format
msgid "%1% was substituted with %2%"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:317
msgid ""
"Most likely the configuration was produced by a newer version of PrusaSlicer "
"or by some PrusaSlicer fork."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:318
msgid "The following values were substituted:"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:319
msgid "Review the substitutions and adjust them if needed."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:329 src/slic3r/GUI/Plater.cpp:853
msgid "SLA print settings"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:333 src/slic3r/GUI/PhysicalPrinterDialog.cpp:158
msgid "Physical Printer"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:346
msgid ""
"Configuration bundle was loaded, however some configuration values were not "
"recognized."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:356
#, boost-format
msgid ""
"Configuration file \"%1%\" was loaded, however some configuration values "
"were not recognized."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:286
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:287
msgid "Developed by Prusa Research."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:289
msgid ""
"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:290
msgid "Artwork model by Creative Tools"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:431
#, boost-format
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:439
#, c-format, boost-format
msgid "%s - BREAKING CHANGE"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:441
msgid "Quit, I will move my data now"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:441
msgid "Start the application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:736
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:739
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:743
msgid ""
"PrusaSlicer has encountered a localization error. Please report to "
"PrusaSlicer team, what language was active and in which scenario this issue "
"happened. Thank you.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:746
msgid "Critical error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:751
#, boost-format
msgid "Internal error: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1015
#, boost-format
msgid "You are opening %1% version %2%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1018
#, boost-format
msgid ""
"The active configuration was created by <b>%1% %2%</b>,\n"
"while a newer configuration was found in <b>%3%</b>\n"
"created by <b>%1% %4%</b>.\n"
"\n"
"Shall the newer configuration be imported?\n"
"If so, your active configuration will be backed up before importing the new "
"configuration."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1026
#, boost-format
msgid ""
"An existing configuration was found in <b>%3%</b>\n"
"created by <b>%1% %2%</b>.\n"
"\n"
"Shall this configuration be imported?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1034
msgid "Import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1035
msgid "Don't import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1043
msgid "Continue and import newer configuration?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1102
msgid ""
"You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
"32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
"available in the system.\n"
"Please download and install a 64 bit build of PrusaSlicer from https://www."
"prusa3d.cz/prusaslicer/.\n"
"Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1189
#, c-format, boost-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1191 src/slic3r/GUI/GUI_App.cpp:3288
#: src/slic3r/GUI/Plater.cpp:1730 src/slic3r/GUI/UnsavedChangesDialog.cpp:920
msgid "Remember my choice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1233
msgid "Loading configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1264
#, boost-format
msgid "New prerelease version %1% is available."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1265
msgid "See Releases page."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1320
msgid "Preparing settings tabs"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1400 src/slic3r/GUI/Preferences.cpp:382
msgid "Restore window position on start"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1402
msgid "PrusaSlicer started after a crash"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1403
#, boost-format
msgid ""
"PrusaSlicer crashed last time when attempting to set window position.\n"
"We are sorry for the inconvenience, it unfortunately happens with certain "
"multiple-monitor setups.\n"
"More precise reason for the crash: \"%1%\".\n"
"For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n"
"\n"
"To avoid this problem, consider disabling \"%4%\" in \"Preferences\". "
"Otherwise, the application will most likely crash again next time."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1415
#, boost-format
msgid "Disable \"%1%\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1416
#, boost-format
msgid "Leave \"%1%\" enabled"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1787
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1791
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1793
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1797 src/slic3r/GUI/PhysicalPrinterDialog.cpp:793
msgid "Information"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1810 src/slic3r/GUI/GUI_App.cpp:1821
msgid "Recreating"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1824
msgid "Loading of current presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1829
msgid "Loading of a mode view"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1968
msgid "Choose one file (3MF/AMF):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1980
msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1991
msgid "Choose ZIP file"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2003
msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2014
msgid "Changing of an application language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2155
msgid "Select the language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2155
msgid "Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2319
msgid "modified"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2358
msgid ""
"Simple mode supports manipulation with single-part object(s)\n"
"or object(s) with support modifiers only."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2360
msgid "Please check your object list before mode changing."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2361
msgid "Change application mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2392
#, c-format, boost-format
msgid "Run %s"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2396
msgid "&Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2396
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2397
msgid "Take Configuration &Snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2397
msgid "Capture a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2398
msgid "Check for Configuration Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2398
msgid "Check for configuration updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2399
msgid "Check for Application Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2399
msgid "Check for new version of application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2406
msgid "&Preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2412
msgid "Application preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2417
msgid "Simple View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2419
msgid "Advanced View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2420
msgid "Expert View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2425
msgid "Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2425
#, c-format, boost-format
msgid "%s View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2428
msgid "&Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2431
msgid "Flash Printer &Firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2431
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2454
msgid "Taking a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2455
msgid ""
"Some presets are modified and the unsaved changes will not be captured by "
"the configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2456
msgid "Snapshot name"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2472
msgid "Loading a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2481
#, boost-format
msgid "Continue to activate a configuration snapshot %1%?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2495
msgid "Failed to activate configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2515
msgid "Language selection"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2518
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2520 src/slic3r/GUI/Preferences.cpp:706
#: src/slic3r/GUI/Selection.cpp:1419
msgid "Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2547
msgid "&Configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2555
msgid "Restart application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2721
msgid "For new project all modifications will be reseted"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2759
msgid "Loading a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2762
msgid "Project is loading"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2762
msgid "Opening new project while some presets are unsaved."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2781
msgid "The uploads are still ongoing"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2781
msgid "Stop them and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2785
msgid "Ongoing uploads"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3021
msgid ""
"It's impossible to print object(s) which contains parameter modifiers with "
"SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3022 src/slic3r/GUI/Jobs/SLAImportJob.cpp:149
#: src/slic3r/GUI/Plater.cpp:2527
msgid "Please check your object list before preset changing."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3056
msgid "Configuration is editing from ConfigWizard"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3074
#, boost-format
msgid "Welcome to %1% version %2%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3076
#, boost-format
msgid ""
"Do you wish to register downloads from <b>Printables.com</b>\n"
"for this <b>%1% %2%</b> executable?\n"
"\n"
"Downloads can be registered for only 1 executable at time."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3104
msgid "Select a gcode file:"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3287 src/slic3r/GUI/GUI_App.cpp:3310
msgid "Open hyperlink in default browser?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3287 src/slic3r/GUI/GUI_App.cpp:3310
msgid "PrusaSlicer: Open hyperlink"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3292 src/slic3r/GUI/Preferences.cpp:570
msgid "Suppress to open hyperlink in browser"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3294 src/slic3r/GUI/Plater.cpp:1736
msgid "PrusaSlicer will remember your choice."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3295
msgid "You will not be asked about it again on hyperlinks hovering."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3296 src/slic3r/GUI/Plater.cpp:1740
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to changes your choice."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3298 src/slic3r/GUI/Plater.cpp:1742
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
msgid "PrusaSlicer: Don't ask me again"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3372
msgid "Check for application update has failed."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3373
#, boost-format
msgid "You are currently running the latest released version %1%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3376
#, boost-format
msgid ""
"There are no new released versions online. The latest release version is %1%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3437
#, boost-format
msgid "Downloading %1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3447
msgid "Downloading of the new version is in progress. Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3465
msgid ""
"Could not start URL download. Destination folder is not set. Please choose "
"destination folder in Configuration Wizard."
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:64 src/slic3r/GUI/GUI_Init.cpp:67
msgid "PrusaSlicer GUI initialization failed"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:67
#, boost-format
msgid "Fatal error, exception catched: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127
#: src/libslic3r/PrintConfig.cpp:297 src/libslic3r/PrintConfig.cpp:421
#: src/libslic3r/PrintConfig.cpp:464 src/libslic3r/PrintConfig.cpp:472
#: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:870
#: src/libslic3r/PrintConfig.cpp:879 src/libslic3r/PrintConfig.cpp:1290
#: src/libslic3r/PrintConfig.cpp:1374 src/libslic3r/PrintConfig.cpp:1611
#: src/libslic3r/PrintConfig.cpp:1993 src/libslic3r/PrintConfig.cpp:2068
#: src/libslic3r/PrintConfig.cpp:2302 src/libslic3r/PrintConfig.cpp:2994
#: src/libslic3r/PrintConfig.cpp:3002 src/libslic3r/PrintConfig.cpp:3062
#: src/libslic3r/PrintConfig.cpp:3070 src/libslic3r/PrintConfig.cpp:3260
msgid "Layers and Perimeters"
msgstr "Kerrokset ja kehät"

#: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131
#: src/slic3r/GUI/Tab.cpp:1501 src/slic3r/GUI/Tab.cpp:1503
#: src/libslic3r/ExtrusionRole.cpp:48 src/libslic3r/ExtrusionRole.cpp:79
#: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:2133
#: src/libslic3r/PrintConfig.cpp:2142 src/libslic3r/PrintConfig.cpp:2151
#: src/libslic3r/PrintConfig.cpp:2161 src/libslic3r/PrintConfig.cpp:2170
#: src/libslic3r/PrintConfig.cpp:2604 src/libslic3r/PrintConfig.cpp:2610
#: src/libslic3r/PrintConfig.cpp:2618 src/libslic3r/PrintConfig.cpp:2631
#: src/libslic3r/PrintConfig.cpp:2641 src/libslic3r/PrintConfig.cpp:2648
#: src/libslic3r/PrintConfig.cpp:2664 src/libslic3r/PrintConfig.cpp:2680
#: src/libslic3r/PrintConfig.cpp:2701 src/libslic3r/PrintConfig.cpp:2714
#: src/libslic3r/PrintConfig.cpp:2730 src/libslic3r/PrintConfig.cpp:2745
#: src/libslic3r/PrintConfig.cpp:2763 src/libslic3r/PrintConfig.cpp:2773
#: src/libslic3r/PrintConfig.cpp:2782 src/libslic3r/PrintConfig.cpp:2793
#: src/libslic3r/PrintConfig.cpp:2805 src/libslic3r/PrintConfig.cpp:2819
#: src/libslic3r/PrintConfig.cpp:2827 src/libslic3r/PrintConfig.cpp:2828
#: src/libslic3r/PrintConfig.cpp:2837 src/libslic3r/PrintConfig.cpp:2851
#: src/libslic3r/PrintConfig.cpp:2861 src/libslic3r/PrintConfig.cpp:2875
#: src/libslic3r/PrintConfig.cpp:2883 src/libslic3r/PrintConfig.cpp:2895
#: src/libslic3r/PrintConfig.cpp:2907 src/libslic3r/PrintConfig.cpp:2918
#: src/libslic3r/PrintConfig.cpp:2931 src/libslic3r/PrintConfig.cpp:2944
#: src/libslic3r/PrintConfig.cpp:2960 src/libslic3r/PrintConfig.cpp:2970
msgid "Support material"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135
#: src/libslic3r/PrintConfig.cpp:3216 src/libslic3r/PrintConfig.cpp:3224
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:65
msgid "Pad and Support"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/Tab.cpp:1467
#: src/libslic3r/ExtrusionRole.cpp:44 src/libslic3r/ExtrusionRole.cpp:71
#: src/libslic3r/PrintConfig.cpp:1627 src/libslic3r/PrintConfig.cpp:1633
#: src/libslic3r/PrintConfig.cpp:1645 src/libslic3r/PrintConfig.cpp:1655
#: src/libslic3r/PrintConfig.cpp:1663 src/libslic3r/PrintConfig.cpp:1665
msgid "Ironing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1341
#: src/libslic3r/PrintConfig.cpp:1342 src/libslic3r/PrintConfig.cpp:1354
#: src/libslic3r/PrintConfig.cpp:1364
msgid "Fuzzy Skin"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/Tab.cpp:1545
#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:533
#: src/libslic3r/PrintConfig.cpp:546 src/libslic3r/PrintConfig.cpp:555
#: src/libslic3r/PrintConfig.cpp:564 src/libslic3r/PrintConfig.cpp:573
#: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:1381
#: src/libslic3r/PrintConfig.cpp:1584 src/libslic3r/PrintConfig.cpp:1664
#: src/libslic3r/PrintConfig.cpp:2058 src/libslic3r/PrintConfig.cpp:2392
#: src/libslic3r/PrintConfig.cpp:2445 src/libslic3r/PrintConfig.cpp:3047
msgid "Speed"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1595
#: src/slic3r/GUI/Tab.cpp:2400 src/libslic3r/PrintConfig.cpp:887
#: src/libslic3r/PrintConfig.cpp:1537 src/libslic3r/PrintConfig.cpp:2035
#: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2693
#: src/libslic3r/PrintConfig.cpp:2721
msgid "Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:838
#: src/libslic3r/PrintConfig.cpp:951 src/libslic3r/PrintConfig.cpp:1276
#: src/libslic3r/PrintConfig.cpp:1545 src/libslic3r/PrintConfig.cpp:2044
#: src/libslic3r/PrintConfig.cpp:2433 src/libslic3r/PrintConfig.cpp:2702
#: src/libslic3r/PrintConfig.cpp:3034
msgid "Extrusion Width"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1487
#: src/libslic3r/PrintConfig.cpp:629 src/libslic3r/PrintConfig.cpp:640
#: src/libslic3r/PrintConfig.cpp:653
msgid "Skirt and brim"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:437
#: src/slic3r/GUI/Tab.cpp:5150 src/slic3r/GUI/Tab.cpp:5152
#: src/libslic3r/PrintConfig.cpp:3402 src/libslic3r/PrintConfig.cpp:3411
#: src/libslic3r/PrintConfig.cpp:3420 src/libslic3r/PrintConfig.cpp:3430
#: src/libslic3r/PrintConfig.cpp:3440 src/libslic3r/PrintConfig.cpp:3461
#: src/libslic3r/PrintConfig.cpp:3484 src/libslic3r/PrintConfig.cpp:3491
#: src/libslic3r/PrintConfig.cpp:3506 src/libslic3r/PrintConfig.cpp:3516
#: src/libslic3r/PrintConfig.cpp:3525 src/libslic3r/PrintConfig.cpp:3538
#: src/libslic3r/PrintConfig.cpp:3548 src/libslic3r/PrintConfig.cpp:3562
#: src/libslic3r/PrintConfig.cpp:3572 src/libslic3r/PrintConfig.cpp:3917
#: src/libslic3r/PrintConfig.cpp:3939 src/libslic3r/PrintConfig.cpp:3946
#: src/libslic3r/PrintConfig.cpp:3954
msgid "Supports"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:592
#: src/slic3r/GUI/Tab.cpp:5163 src/slic3r/GUI/Tab.cpp:5164
#: src/slic3r/GUI/Tab.cpp:5229 src/libslic3r/PrintConfig.cpp:3962
#: src/libslic3r/PrintConfig.cpp:3969 src/libslic3r/PrintConfig.cpp:3983
#: src/libslic3r/PrintConfig.cpp:3994 src/libslic3r/PrintConfig.cpp:4004
#: src/libslic3r/PrintConfig.cpp:4026 src/libslic3r/PrintConfig.cpp:4037
#: src/libslic3r/PrintConfig.cpp:4044 src/libslic3r/PrintConfig.cpp:4051
#: src/libslic3r/PrintConfig.cpp:4062 src/libslic3r/PrintConfig.cpp:4071
#: src/libslic3r/PrintConfig.cpp:4080
msgid "Pad"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:5181
#: src/slic3r/GUI/Tab.cpp:5182 src/libslic3r/SLA/Hollowing.cpp:82
#: src/libslic3r/SLA/Hollowing.cpp:87 src/libslic3r/SLA/Hollowing.cpp:102
#: src/libslic3r/SLA/Hollowing.cpp:111 src/libslic3r/PrintConfig.cpp:4090
#: src/libslic3r/PrintConfig.cpp:4097 src/libslic3r/PrintConfig.cpp:4107
#: src/libslic3r/PrintConfig.cpp:4116
msgid "Hollowing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:159
msgid "Add part"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:160
msgid "Add negative volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:161
msgid "Add modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:162
msgid "Add support blocker"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:163
msgid "Add support enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:169
msgid "Add text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:170
msgid "Add negative text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:171
msgid "Add text modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:307
msgid "Select showing settings"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:414 src/slic3r/GUI/GUI_Factories.cpp:419
#: src/slic3r/GUI/GUI_Factories.cpp:625 src/slic3r/GUI/GUI_Factories.cpp:631
#, c-format, boost-format
msgid "Quick Add Settings (%s)"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:460
msgid "Remove the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:475
msgid "Load"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:481 src/slic3r/GUI/GUI_Factories.cpp:566
#: src/slic3r/GUI/GUI_Factories.cpp:570
msgid "Box"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Cylinder"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Slab"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:493
msgid "Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:529 src/slic3r/GUI/GUI_Factories.cpp:549
#: src/slic3r/GUI/GUI_ObjectList.cpp:671
msgid "Text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:555 src/slic3r/GUI/GUI_Factories.cpp:558
#: src/slic3r/GUI/GUI_Factories.cpp:595
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:604
msgid "Add settings"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:695
msgid "Change type"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:705 src/slic3r/GUI/GUI_Factories.cpp:717
msgid "Set as a Separated Object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:717
msgid "Set as a Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:727
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:763 src/slic3r/GUI/GUI_ObjectList.cpp:2076
#: src/slic3r/GUI/GUI_ObjectList.cpp:2588
msgid "Invalidate cut info"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:778
msgid "Rename"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:788
msgid "Fix through the Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:807
msgid "Export as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:818
msgid "Reload the selected volumes from disk"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:825 src/slic3r/GUI/Plater.cpp:3621
msgid "Replace with STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:825
msgid "Replace the selected volume with new STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:832
msgid "Set extruder for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:870 src/slic3r/GUI/Tab.cpp:5157
#: src/slic3r/Utils/Repetier.cpp:145 src/slic3r/Utils/Repetier.cpp:226
#: src/libslic3r/PrintConfig.cpp:736 src/libslic3r/PrintConfig.cpp:2810
#: src/libslic3r/PrintConfig.cpp:3927
msgid "Default"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:887
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:887
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:929 src/slic3r/GUI/Plater.cpp:6247
msgid "Convert from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:930 src/slic3r/GUI/Plater.cpp:6248
msgid "Revert conversion from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:931 src/slic3r/GUI/Plater.cpp:6249
msgid "Convert from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:932 src/slic3r/GUI/Plater.cpp:6249
msgid "Revert conversion from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:953 src/slic3r/GUI/GUI_ObjectList.cpp:2296
#: src/libslic3r/PrintConfig.cpp:4784
msgid "Merge"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:953
msgid "Merge objects to the one multipart object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:972
msgid "Along X axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:972
msgid "Mirror the selected object along the X axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:974
msgid "Along Y axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:974
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:976
msgid "Along Z axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:976
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:979
msgid "Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:979
msgid "Mirror the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:985
msgid "Edit text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1007
msgid "Ability to change text, font, size, ..."
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1030 src/slic3r/GUI/GUI_ObjectList.cpp:1799
msgid "Add Shape"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1068
msgid "To objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1068
msgid "Split the selected object into individual objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1071
msgid "To parts"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1071 src/slic3r/GUI/GUI_Factories.cpp:1106
msgid "Split the selected object into individual parts"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1075 src/slic3r/GUI/GUI_Factories.cpp:1106
#: src/libslic3r/PrintConfig.cpp:4813
msgid "Split"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1075
msgid "Split the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1234 src/slic3r/GUI/GUI_Factories.cpp:1252
msgid "Set number of instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1234
msgid "Change the number of instances of the selected objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1246
msgid "Add one more instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1249
msgid "Remove one instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1252
msgid "Change the number of instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1256
msgid "Fill bed with instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1256
msgid "Fill the remaining area of bed with instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Start at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Stop at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:160
msgid "Remove layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
msgid "Add layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:334
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:142
msgid "Name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:353 src/slic3r/GUI/GUI_ObjectList.cpp:524
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:434
msgid "Invalid object part index"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:444
msgid "No errors detected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:453
#, c-format, boost-format
msgid "Auto-repaired %1$d error"
msgid_plural "Auto-repaired %1$d errors"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:459
#, c-format, boost-format
msgid "%1$d degenerate facet"
msgid_plural "%1$d degenerate facets"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:461
#, c-format, boost-format
msgid "%1$d edge fixed"
msgid_plural "%1$d edges fixed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:463
#, c-format, boost-format
msgid "%1$d facet removed"
msgid_plural "%1$d facets removed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:465
#, c-format, boost-format
msgid "%1$d facet reversed"
msgid_plural "%1$d facets reversed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:467
#, c-format, boost-format
msgid "%1$d backward edge"
msgid_plural "%1$d backward edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:470 src/slic3r/GUI/GUI_ObjectList.cpp:473
#, c-format, boost-format
msgid "%1$d open edge"
msgid_plural "%1$d open edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:472
msgid "Remaining errors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:480
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:526
msgid "Right button click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:528
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:532
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:534
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:660
msgid "Change Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:680
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:680
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1333
#: src/slic3r/GUI/GUI_ObjectList.cpp:4605
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
msgid "Volumes in Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
msgid "Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1389
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1390
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1391
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1431
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1432
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1512
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1512
msgid "Load Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1639 src/slic3r/GUI/Plater.cpp:2485
msgid "Loading file"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1647
msgid "Error!"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1737
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1767
msgid "Generic"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1832
msgid "Add Shape from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1832
msgid "Add Shapes from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1952
msgid "Remove paint-on supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1959
msgid "Remove paint-on seam"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1973
msgid "Remove Multi Material painting"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1979
msgid "Shift objects to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1985
msgid "Remove variable layer height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2006
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2030
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2046
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2064
msgid "Delete connector from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2065
msgid "Delete solid part from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2066
msgid "Delete negative volume from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2068
msgid ""
"To save cut information you can delete all connectors from all related "
"objects."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2071
msgid ""
"This action will break a cut information.\n"
"After that PrusaSlicer can't guarantee model consistency."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2073
msgid ""
"To manipulate with solid parts or negative volumes you have to invalidate "
"cut information first."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2078
#: src/slic3r/GUI/GUI_ObjectList.cpp:2618
msgid "Delete all connectors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2109
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2118
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2144
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2148
msgid "Instance cannot be deleted from cut object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2152
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2176
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2180
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2183 src/slic3r/GUI/Plater.cpp:3140
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"splitting the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2303
msgid "Merged"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2398
msgid "Merge all parts to the one single object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2430
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2703
msgid "Cut Connectors information"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2713
#: src/slic3r/GUI/GUI_ObjectList.cpp:2778
msgid "Object manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2723
msgid "Group manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2814
msgid "Object Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2818
msgid "Part Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2823
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2829
msgid "Part manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2837
msgid "Instance manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2845
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2845
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3381
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3459
#: src/slic3r/GUI/GUI_ObjectList.cpp:3487
#: src/slic3r/GUI/GUI_ObjectList.cpp:3507
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3553
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3557
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3562
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3621
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4003
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4015
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4154
msgid "Object or Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4155
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4157
msgid "Unsupported selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4158
#, c-format, boost-format
msgid "You started your selection with %s Item."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4159
#, c-format, boost-format
msgid "In this mode you can select only other %s Items%s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4162
msgid "of a current Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4167
#: src/slic3r/GUI/GUI_ObjectList.cpp:4242 src/slic3r/GUI/Plater.cpp:199
msgid "Info"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4347
msgid "Negative Volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4359
msgid "Support Blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4359
msgid "Support Enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4369
msgid "Select type of part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4375
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4635
msgid "Enter new name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4635
msgid "Renaming"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4697
msgid "Repairing model"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4707
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"repairing the mesh."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4727
msgid "Fix through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4730
msgid "Fixing through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4760
msgid "The following model was repaired successfully"
msgid_plural "The following models were repaired successfully"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4766
msgid "Folowing model repair failed"
msgid_plural "Folowing models repair failed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4771
msgid "Repairing was canceled"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4888
msgid "Change Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:5014
msgid "Set Printable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:5014
msgid "Set Unprintable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:5016
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:5016
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:5017
msgid "Set Printable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:5017
msgid "Set Unprintable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:144 src/libslic3r/GCode.cpp:599
#: src/libslic3r/PrintObjectSlice.cpp:736
msgid "Object name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:202
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:606
msgid "Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:219
msgid "Size [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:251
#, boost-format
msgid "Mirror along %1% axis"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:272
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:313
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:325
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:331
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:347
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:361
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:388
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:401
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:426
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:438
msgid "Skew [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:442
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:449
msgid "Reset skew"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:455
msgid "Inches"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:608
msgid "Scale factors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:619
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:624
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:652
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:660
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:668
msgid "Rotate (relative)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:623
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:659
msgid "Translate (relative) [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:678
msgid "Translate"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:797
msgid "Left handed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:852
msgid "World coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:853
msgid "Object coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:854
msgid "Part coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:904
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:937
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1026
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1042
msgid "Set Size"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:64
msgid "Additional Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:100
msgid "Remove parameter"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:106
#, c-format, boost-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:155
#, c-format, boost-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:582
msgid "NOTE:"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:583
#, boost-format
msgid "Sliced object \"%1%\" looks like a logo or a sign"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:584
msgid "Apply color change automatically"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:773
#: src/slic3r/GUI/HintNotification.cpp:799
#: src/slic3r/GUI/NotificationManager.cpp:457
#: src/slic3r/GUI/NotificationManager.cpp:474
msgid "More"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:914
msgid "Open Preferences."
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:1006
msgid "Open Documentation in web browser."
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:680
msgid "Edit"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:1186 src/slic3r/GUI/Search.cpp:531
msgid "Use for search"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:1187 src/slic3r/GUI/Search.cpp:524
msgid "Category"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:1189 src/slic3r/GUI/Search.cpp:526
msgid "Search in English"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:268
msgid "Arranging"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:306
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:307
msgid "Arranging done."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:327
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:367
#, c-format, boost-format
msgid ""
"Arrangement ignored the following objects which can't fit into a single "
"bed:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:130
msgid "Filling bed"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:161
msgid "Bed filling canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:162
msgid "Bed filling done."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:208
msgid "Add Emboss text object"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:579
#, boost-format
msgid "Text: %1%"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:628
msgid "Add Emboss text Volume"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:733
msgid "Font doesn't have any shape for given text."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:773
msgid "There is no volume in projection direction."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:822
msgid "There is no valid surface for text projection."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:22
msgid "Best surface quality"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24
msgid "Optimize object rotation for best surface quality."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:25
msgid "Reduced overhang slopes"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:27
msgid ""
"Optimize object rotation to have minimum amount of overhangs needing support "
"structures.\n"
"Note that this method will try to find the best surface of the object for "
"touching the print bed if no elevation is set."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:31
msgid "Lowest Z height"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:33
msgid "Rotate the model to have the lowest z height for faster print time."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:53
msgid "Searching for optimal orientation"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:83
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:84
msgid "Orientation found."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49
msgid "Importing SLA archive"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:77
msgid ""
"The SLA archive doesn't contain any presets. Please activate some SLA "
"printer preset first before importing that SLA archive."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:81
msgid "Import is unavailable for this archive format."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:86
msgid "Importing canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:87
msgid "Importing done."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:108
msgid "The file does not exist."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
msgid ""
"The imported SLA archive did not contain any presets. The current SLA "
"presets were used as fallback."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:148 src/slic3r/GUI/Plater.cpp:2526
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:150 src/slic3r/GUI/Plater.cpp:2528
msgid "Attention!"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:166
msgid ""
"The profile in the imported archive is corrupted and will not be loaded."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:178
msgid ""
"No object could be retrieved from the archive. The slices might be corrupted "
"or missing."
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1184
msgid "Keyboard Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:86
msgid "New project, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:87
msgid "Open project AMF/3MF with config, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:88
msgid "Save project (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:89
msgid "Save project as (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:90
msgid "(Re)slice"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:92
msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
msgid "Import Config from ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:96 src/slic3r/GUI/Plater.cpp:951
#: src/slic3r/GUI/Plater.cpp:7239 src/libslic3r/PrintConfig.cpp:4670
msgid "Export G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:97 src/slic3r/GUI/Plater.cpp:7240
msgid "Send G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:98
msgid "Export config"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:99 src/slic3r/GUI/Plater.cpp:934
msgid "Export to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
msgid "Eject SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
msgid "Select all objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
msgid "Deselect all"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
msgid "Delete selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Paste from clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
msgid "Reload plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
msgid "Select Plater Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Select Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Select Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Select Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Switch to 3D"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Switch to Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
#: src/slic3r/GUI/PrintHostDialogs.cpp:267
msgid "Print host upload queue"
msgstr "Tulosta isäntäkoneen latausjono"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124 src/slic3r/GUI/MainFrame.cpp:77
msgid "Open new instance"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Camera view"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Show/Hide object/instance labels"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Preferences.cpp:58
#: src/slic3r/GUI/Preferences.cpp:166 src/slic3r/GUI/Preferences.cpp:189
#: src/slic3r/GUI/Preferences.cpp:197
msgid "Preferences"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Show keyboard shortcuts list"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
msgid "Commands"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Add Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Remove Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Press to activate selection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Press to activate deselection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Arrow Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Move selection 10 mm in positive Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid "Arrow Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Move selection 10 mm in negative Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
msgid "Arrow Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
msgid "Move selection 10 mm in negative X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid "Arrow Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Move selection 10 mm in positive X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Any arrow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Movement step set to 1 mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Movement in camera space"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Page Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Rotate selection 45 degrees CCW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Page Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Rotate selection 45 degrees CW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Gizmo rotate"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Gizmo cut"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Gizmo Place face on bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Gizmo SLA hollow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Gizmo SLA support points"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Gizmo FDM paint-on supports"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Gizmo FDM paint-on seam"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
msgid "Gizmo Multi Material painting"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Gizmo Text emboss / engrave"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
msgid "Unselect gizmo or clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
msgid "Zoom to Bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
msgid "Zoom in"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Zoom out"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
msgid "Switch between Editor/Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
msgid "Collapse/Expand the sidebar"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
msgid "Minimize application"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:187 src/slic3r/GUI/MainFrame.cpp:329
#: src/slic3r/GUI/MainFrame.cpp:378 src/slic3r/GUI/MainFrame.cpp:490
#: src/slic3r/GUI/MainFrame.cpp:493 src/slic3r/GUI/MainFrame.cpp:515
#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
msgid "Gizmo move: Press to snap by 1mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:192
msgid "Gizmo scale: Press to snap by 5%"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Gizmos"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid ""
"The following shortcuts are applicable when the specified gizmo is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
msgid "Set selected items as Printable/Unprintable"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
msgid "Set default extruder for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
msgid "Set extruder number for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
msgid "Objects List"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/MainFrame.cpp:1612
msgid "Open a G-code file"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:213 src/slic3r/GUI/MainFrame.cpp:1443
#: src/slic3r/GUI/MainFrame.cpp:1447 src/slic3r/GUI/MainFrame.cpp:1617
#: src/slic3r/GUI/MainFrame.cpp:1621
msgid "Reload the plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
msgid "Vertical slider - Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
msgid "Vertical slider - Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
msgid "Horizontal slider - Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
msgid "Horizontal slider - Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
msgid "On/Off one layer mode of the vertical slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
msgid "Show/Hide legend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
msgid "Show/Hide G-code window"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:236 src/slic3r/GUI/Plater.cpp:4577
#: src/slic3r/GUI/Tab.cpp:2925
msgid "Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
msgid "Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
msgid "Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
msgid "Set upper thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
msgid "Set lower thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Add color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
msgid "Delete color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:245
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
#: src/slic3r/GUI/KBShortcutsDialog.cpp:256
#: src/slic3r/GUI/KBShortcutsDialog.cpp:257
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Vertical Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid ""
"The following shortcuts are applicable in G-code preview when the vertical "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
msgid "Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid "Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Set left thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid "Set right thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid "Horizontal Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid ""
"The following shortcuts are applicable in G-code preview when the horizontal "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:284
msgid "Keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:91
#: src/slic3r/GUI/MainFrame.cpp:1503
msgid "Open a new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:93
msgid "G-code preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:1388
msgid "Open G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:91 src/slic3r/GUI/MainFrame.cpp:1628
msgid "Open PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:93
msgid "Open new G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:227
msgid "Closing PrusaSlicer. Current project is modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:234
msgid "PrusaSlicer is closing"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:234
msgid "Closing PrusaSlicer while some presets are modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:330 src/slic3r/GUI/MainFrame.cpp:380
#: src/slic3r/GUI/Tab.hpp:418 src/slic3r/GUI/Tab.hpp:558
msgid "Print Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:384
#: src/slic3r/GUI/MainFrame.cpp:2197 src/slic3r/GUI/MainFrame.cpp:2198
#: src/slic3r/GUI/Tab.hpp:539
msgid "Material Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:382
#: src/slic3r/GUI/MainFrame.cpp:2197 src/slic3r/GUI/MainFrame.cpp:2198
#: src/slic3r/GUI/Tab.hpp:455
msgid "Filament Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:332 src/slic3r/GUI/MainFrame.cpp:386
#: src/slic3r/GUI/Tab.hpp:507
msgid "Printer Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:685 src/slic3r/GUI/Plater.cpp:1722
#: src/slic3r/GUI/Plater.cpp:2873
msgid "Untitled"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:710
msgid "based on Slic3r"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1150
msgid "Prusa 3D &Drivers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1150
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1152
msgid "Software &Releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1152
msgid "Open the software releases page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1158
#, c-format, boost-format
msgid "%s &Website"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1159
#, c-format, boost-format
msgid "Open the %s website in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1165
msgid "System &Info"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1165
msgid "Show system information"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1167
msgid "Show &Configuration Folder"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1167
msgid "Show user configuration folder (datadir)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1169
msgid "Report an I&ssue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1169
#, c-format, boost-format
msgid "Report an issue on %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
#, c-format, boost-format
msgid "&About %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
msgid "Show about dialog"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1177
msgid "Show Tip of the Day"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1181
msgid ""
"Opens Tip of the day notification in bottom right corner or shows another "
"tip if already opened."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1184
msgid "Show the list of the keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1198
msgid "Iso"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1198
msgid "Iso View"
msgstr ""

#. TRN Main menu: View->Top
#: src/slic3r/GUI/MainFrame.cpp:1202
msgid "Top"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1202
msgid "Top View"
msgstr ""

#. TRN Main menu: View->Bottom
#: src/slic3r/GUI/MainFrame.cpp:1205
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1205
msgid "Bottom View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1207
msgid "Front"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1207
msgid "Front View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1209 src/libslic3r/PrintConfig.cpp:2308
msgid "Rear"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1209
msgid "Rear View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1211
msgid "Left"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1211
msgid "Left View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1213
msgid "Right"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1213
msgid "Right View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1226
msgid "&New Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1226
msgid "Start a new project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1229
msgid "&Open Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1229
msgid "Open a project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1234
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1246
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "&Save Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "Save current project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
msgid "Save Project &as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
msgid "Save current project file as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1284
msgid "Import STL/3MF/STEP/OBJ/AM&F"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1284
msgid "Load a model"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Import STL (Imperial Units)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Load an model saved with imperial units"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1292
msgid "Import SLA Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1292
msgid "Load an SLA archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1296
msgid "Import ZIP Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1296
msgid "Load a ZIP archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1301
msgid "Import &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1301
msgid "Load exported configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1304
msgid "Import Config from &Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1304
msgid "Load configuration from project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1308
msgid "Import Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1308
msgid "Load presets from a bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1311
msgid "&Import"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1314 src/slic3r/GUI/MainFrame.cpp:1677
msgid "Export &G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1314
msgid "Export current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1318 src/slic3r/GUI/MainFrame.cpp:1678
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1318
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "Export G-code to SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1326
msgid "Export Plate as &STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1326
msgid "Export current plate as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1329
msgid "Export Plate as STL/OBJ &Including Supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1329
msgid "Export current plate as STL/OBJ including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1625
msgid "Export &Toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1625
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1341
msgid "Export &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1341
msgid "Export current configuration to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1344
msgid "Export Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1344
msgid "Export all presets to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1347
msgid "Export Config Bundle With Physical Printers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1347
msgid "Export all presets including physical printers to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1350
msgid "&Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1352
msgid "Ejec&t SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1352
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1360
msgid "Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1360
msgid "Slice a file into a G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1366
msgid "Quick Slice and Save As"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1366
msgid "Slice a file into a G-code, save as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1372
msgid "Repeat Last Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1372
msgid "Repeat last quick slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1380
msgid "(Re)Slice No&w"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1380
msgid "Start new slicing process"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "&Repair STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "Automatically repair an STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1388
msgid "&G-code Preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1392
msgid "E&xit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1392 src/slic3r/GUI/UpdateDialogs.cpp:376
#: src/slic3r/GUI/UpdateDialogs.cpp:423
#, c-format, boost-format
msgid "Exit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1632
msgid "&Quit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1632
#, c-format, boost-format
msgid "Quit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1410
msgid "&Select All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1411
msgid "Selects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1413
msgid "D&eselect All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1414
msgid "Deselects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1417
msgid "&Delete Selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1418
msgid "Deletes the current selection"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1420
msgid "Delete &All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1421
msgid "Deletes all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1425
msgid "&Undo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1428
msgid "&Redo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1433
msgid "&Copy"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1434
msgid "Copy selection to clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1436
msgid "&Paste"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1437
msgid "Paste clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1442 src/slic3r/GUI/MainFrame.cpp:1446
#: src/slic3r/GUI/MainFrame.cpp:1616 src/slic3r/GUI/MainFrame.cpp:1620
msgid "Re&load from Disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1452
msgid "Searc&h"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1453
msgid "Search in settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1461
msgid "&Plater Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1461
msgid "Show the plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1466
msgid "P&rint Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1466
msgid "Show the print settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1469 src/slic3r/GUI/MainFrame.cpp:1680
msgid "&Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1469
msgid "Show the filament settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1473
msgid "Print&er Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1473
msgid "Show the printer settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1479
msgid "3&D"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1479
msgid "Show the 3D editing view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1482
msgid "Pre&view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1482
msgid "Show the 3D slices preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1488
msgid "Open the dialog to modify shape gallery"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1499
msgid "Print &Host Upload Queue"
msgstr "Tulosta &isäntäkoneen latausjono"

#: src/slic3r/GUI/MainFrame.cpp:1499
msgid "Display the Print Host Upload Queue window"
msgstr "Näytä tulosta isäntäkoneen latausjono-ikkuna"

#: src/slic3r/GUI/MainFrame.cpp:1503
msgid "Open New Instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1507
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1733
msgid "Compare Presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1507
msgid "Compare presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1517
msgid "Show &Labels"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1517
msgid "Show object/instance labels in 3D scene"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1520 src/slic3r/GUI/MainFrame.cpp:1642
msgid "Show Legen&d"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1520
msgid "Show legend in preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1523
msgid "&Collapse Sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1523 src/slic3r/GUI/Plater.cpp:2336
msgid "Collapse sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1528
msgid "&Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1528
msgid "Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1544 src/slic3r/GUI/MainFrame.cpp:1651
msgid "&File"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1545
msgid "&Edit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1546
msgid "&Window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1547 src/slic3r/GUI/MainFrame.cpp:1652
msgid "&View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1550 src/slic3r/GUI/MainFrame.cpp:1655
msgid "&Help"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1612
msgid "&Open G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1628
msgid "Open &PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1642
msgid "Show legend"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1677
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1678
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1680
msgid "Mate&rial Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1704
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1716
msgid "No previously sliced file."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1723
msgid "Previously sliced file ("
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1723
msgid ") not found."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1724
msgid "File Not Found"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1759
#, c-format, boost-format
msgid "Save %s file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1759
msgid "SVG"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1759
msgid "G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1771
msgid "Save ZIP file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1780 src/slic3r/GUI/Plater.cpp:3382
#: src/slic3r/GUI/Plater.cpp:6714 src/slic3r/GUI/Tab.cpp:1640
#: src/slic3r/GUI/Tab.cpp:5189
msgid "Slicing"
msgstr ""

#. TRN ProgressDialog on reslicing: "input file basename"
#: src/slic3r/GUI/MainFrame.cpp:1782
#, c-format, boost-format
msgid "Processing %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1805
#, boost-format
msgid "%1% was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1808
msgid "Slicing Done!"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1824
msgid "Select the STL file to repair:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1834
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1845
msgid "Your file was repaired."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1845 src/libslic3r/PrintConfig.cpp:4789
msgid "Repair"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1859
msgid "Save configuration as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1876
msgid "Loading of a configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1878 src/slic3r/GUI/MainFrame.cpp:1945
msgid "Select configuration to load:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1909
msgid "Exporting configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1910
msgid ""
"Some presets are modified and the unsaved changes will not be exported into "
"configuration bundle."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1919
msgid "Save presets bundle as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1942
msgid "Loading of a configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1972
#, c-format, boost-format
msgid "%d presets successfully imported."
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:453
msgid "3Dconnexion settings"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:464
msgid "Device:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:469
msgid "Speed:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:472
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Translation"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:484
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Zoom"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:490
msgid "Deadzone:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:505
msgid "Options:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:508
msgid "Swap Y/Z axes"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:227
#, c-format, boost-format
msgid "%s error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:228
#, c-format, boost-format
msgid "%s has encountered an error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:247
#, c-format, boost-format
msgid "%s warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:248
#, c-format, boost-format
msgid "%s has a warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:261 src/slic3r/GUI/MsgDialog.cpp:274
#, c-format, boost-format
msgid "%s info"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:302
#, c-format, boost-format
msgid "%s information"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:899
msgid "3D Mouse disconnected."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:900
msgid "Configuration update is available."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:900
msgid "See more."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:908
msgid ""
"You have just added a G-code for color change, but its value is empty.\n"
"To export the G-code correctly, check the \"Color Change G-code\" in "
"\"Printer Settings > Custom G-code\""
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:911
msgid ""
"No color change event was added to the print. The print does not look like a "
"sign."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:913
msgid "Desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:915
msgid "Desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:917
msgid "Undo desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:919
msgid "Undo desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:920
msgid "Exporting."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:924
msgid ""
"PrusaSlicer recieved a download request from Printables.com, but it's not "
"allowed. You can allow it"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:925
msgid "here."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:773
msgid "Open Folder."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:811
msgid "Eject drive"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:869
msgid "Ejecting."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1054
#: src/slic3r/GUI/NotificationManager.cpp:1267
#: src/slic3r/GUI/NotificationManager.cpp:1472
msgid "ERROR"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1269
#: src/slic3r/GUI/NotificationManager.cpp:1377
msgid "COMPLETED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1467
msgid "RESOLVING ADDRESS"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1477
msgid "CANCELED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1539
msgid "Cancel upload"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1648
#, c-format, boost-format
msgid "%1$d object was loaded with custom supports."
msgid_plural "%1$d objects were loaded with custom supports."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1649
#, c-format, boost-format
msgid "%1$d object was loaded with custom seam."
msgid_plural "%1$d objects were loaded with custom seam."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1650
#, c-format, boost-format
msgid "%1$d object was loaded with multimaterial painting."
msgid_plural "%1$d objects were loaded with multimaterial painting."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1651
#, c-format, boost-format
msgid "%1$d object was loaded with variable layer height."
msgid_plural "%1$d objects were loaded with variable layer height."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1652
#, c-format, boost-format
msgid "%1$d object was loaded with partial sinking."
msgid_plural "%1$d objects were loaded with partial sinking."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1653
#, c-format, boost-format
msgid "%1$d object was loaded as a part of cut object."
msgid_plural "%1$d objects were loaded as parts of cut object"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Slicing finished."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Export G-Code."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Export."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2101
#: src/slic3r/GUI/NotificationManager.cpp:2108
#: src/slic3r/GUI/NotificationManager.cpp:2124
#: src/slic3r/GUI/NotificationManager.cpp:2130
#: src/slic3r/GUI/NotificationManager.cpp:2201
msgid "ERROR:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2113
#: src/slic3r/GUI/NotificationManager.cpp:2140
#: src/slic3r/GUI/NotificationManager.cpp:2148
#: src/slic3r/GUI/NotificationManager.cpp:2159 src/slic3r/GUI/Plater.cpp:3229
msgid "WARNING:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2274
msgid "Exporting finished."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2449
#: src/slic3r/GUI/UpdateDialogs.cpp:193
msgid "Download"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:67
msgid "Paint-on seam"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:68
msgid "Cut connectors"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:70
msgid "Sinking"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:110
msgid "Instances"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:114
#: src/slic3r/GUI/ObjectDataViewModel.cpp:275
#, c-format, boost-format
msgid "Instance %d"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:121 src/slic3r/GUI/Tab.cpp:5009
#: src/slic3r/GUI/Tab.cpp:5146
msgid "Layers"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
msgid "Range"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:377
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL ES 2.0 capable graphics driver to run "
"correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:380
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL %s capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:383
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:387
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:390
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:392
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:399
#, c-format, boost-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:400
msgid "Error loading shaders"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:126
msgid "Unavailable for this method."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52
msgid "Delete this preset from this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:84
msgid "This printer will be shown in the presets list as"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
msgid "Type here the name of your printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
msgid "Descriptive name for the printer"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
msgid "Add preset for this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2345
msgid "Print Host upload"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:271
msgid "Connection to printers connected via the print host failed."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:313
msgid "Test"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:318
msgid "Could not get a valid Printer Host reference"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:330
msgid "Success!"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:340
msgid "Refresh Printers"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:377
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:378
msgid "Open CA certificate file"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:407
#: src/libslic3r/PrintConfig.cpp:340
msgid "HTTPS CA File"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:408
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:409
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:705
msgid "You have to enter a printer name."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:713
#, boost-format
msgid "Printer with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:714
msgid "Replace?"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:741
#, boost-format
msgid ""
"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
"\" will be used just once."
msgid_plural ""
"Following printer presets are duplicated:%1%The above presets for printer "
"\"%2%\" will be used just once."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:791
msgid "It's not possible to delete the last related preset for the printer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:160
msgid "The provided name is not valid;"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:161
msgid "the following characters are not allowed:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:225
msgid ""
"For a multipart object, this value isn't accurate.\n"
"It doesn't take account of intersections and negative volumes."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:229
msgid "Volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:231
msgid "Facets"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:288
msgid "Sliced Info"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:308 src/slic3r/GUI/Plater.cpp:1411
msgid "Used Filament (g)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:309 src/slic3r/GUI/Plater.cpp:1392
msgid "Used Filament (m)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:310 src/slic3r/GUI/Plater.cpp:1404
msgid "Used Filament (mm³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:311
msgid "Used Material (unit)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:312
msgid "Cost (money)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:313 src/slic3r/GUI/Plater.cpp:1374
#: src/slic3r/GUI/Plater.cpp:1376 src/slic3r/GUI/Plater.cpp:1459
#: src/slic3r/GUI/Plater.cpp:1464
msgid "Estimated printing time"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:314
msgid "Number of tool changes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:439
msgid "Select what kind of support do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:442 src/libslic3r/PrintConfig.cpp:2640
#: src/libslic3r/PrintConfig.cpp:3483
msgid "Support on build plate only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:443
msgid "For support enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:444
msgid "Everywhere"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:477 src/slic3r/GUI/Tab.cpp:1496
msgid "Brim"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:479
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:487
msgid "Purging volumes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:594
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:597
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:598
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:932 src/slic3r/GUI/Plater.cpp:7240
msgid "Send to printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:952 src/slic3r/GUI/Plater.cpp:3382
#: src/slic3r/GUI/Plater.cpp:6717
msgid "Slice now"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1124
msgid "Hold Shift to Slice & Export G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1321
#, boost-format
msgid "%1% (%2$d shell)"
msgid_plural "%1% (%2$d shells)"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1349
msgid "Used Material (ml)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1352
msgid "object"
msgid_plural "objects"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1352
msgid "supports and pad"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1392
msgid "Used Filament (in)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1394 src/slic3r/GUI/Plater.cpp:1445
msgid "objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1394 src/slic3r/GUI/Plater.cpp:1445
msgid "wipe tower"
msgstr "pyyhkäisytorni"

#: src/slic3r/GUI/Plater.cpp:1404
msgid "Used Filament (in³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1428
#, boost-format
msgid "Filament at extruder %1%"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1434
msgid "(including spool)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1443 src/libslic3r/PrintConfig.cpp:1159
#: src/libslic3r/PrintConfig.cpp:3790 src/libslic3r/PrintConfig.cpp:3791
msgid "Cost"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1461
msgid "normal mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1468
msgid "stealth mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1728
#, boost-format
msgid "Do you want to save the changes to \"%1%\"?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1729 src/slic3r/GUI/UnsavedChangesDialog.cpp:907
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1604
msgid "Save"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1729 src/slic3r/GUI/UnsavedChangesDialog.cpp:901
msgid "Discard"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1734 src/slic3r/GUI/Preferences.cpp:331
msgid "Ask for unsaved changes in project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1737
msgid ""
"You will not be asked about it again, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2203
#, c-format, boost-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2209
#, c-format, boost-format
msgid "Ejecting of device %s(%s) has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2228 src/slic3r/GUI/Plater.cpp:5210
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2335
msgid "Expand sidebar"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2417
msgid ""
"The preset below was temporarily installed on the active instance of "
"PrusaSlicer"
msgid_plural ""
"The presets below were temporarily installed on the active instance of "
"PrusaSlicer"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2574
#, boost-format
msgid "Failed loading file \"%1%\" due to an invalid configuration."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2594
#, c-format, boost-format
msgid ""
"Object size from file %s appears to be zero.\n"
"This object has been removed from the model"
msgid_plural ""
"Objects size from file %s appears to be zero.\n"
"These objects have been removed from the model"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2598
msgid "The size of the object is zero"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2611
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2615 src/slic3r/GUI/Plater.cpp:2637
msgid "The object is too small"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2616 src/slic3r/GUI/Plater.cpp:2638
msgid "Apply to all the remaining small objects being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2633
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2650
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should \n"
"the file be loaded as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2653 src/slic3r/GUI/Plater.cpp:2705
msgid "Multi-part object detected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2660
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2661
msgid "Detected advanced data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2702
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2821
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2822
msgid "Object too large?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2902
msgid "Export STL file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2909
msgid "Export AMF file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2915
msgid "Save file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2921
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3035
msgid "Delete object which is a part of cut object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3036
msgid "You try to delete an object which is a part of a cut object."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3037
msgid ""
"This action will break a cut information.\n"
"After that PrusaSlicer can't guarantee model consistency"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3040
msgid "Delete object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3045
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3064
msgid "Delete All Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3093
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3148
msgid ""
"The selected object couldn't be split because it contains only one solid "
"part."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3155
msgid "All non-solid parts (modifiers) were deleted"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3157
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3211
msgid ""
"An object has custom support enforcers which will not be used because "
"supports are disabled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3213
msgid "Enable supports for enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3362 src/slic3r/GUI/Plater.cpp:4258
msgid "Invalid data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3433
msgid "Another export job is currently running."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3519
msgid "Replace from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3537
msgid "Unable to replace with more than one volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3537 src/slic3r/GUI/Plater.cpp:3616
msgid "Error during replace"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3608
msgid "Select the new file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3616
msgid "File for the replace wasn't selected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3703
msgid "Please select the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3734 src/slic3r/GUI/Plater.cpp:5366
#: src/slic3r/GUI/Plater.cpp:5376
msgid "The selected file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3735
msgid "differs from the original file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3735
msgid "Do you want to replace it"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3755 src/slic3r/GUI/Plater.cpp:3761
msgid "Reload from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3876
msgid "Unable to reload:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3881
msgid "Error during reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3899
msgid "Reload all from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4211
msgid "There are active warnings concerning sliced models:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4222
msgid "generated warnings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4267
msgid "Slicing Cancelled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4569
msgid "3D editor view"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4991
msgid "Undo / Redo is processing"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4993
#, boost-format
msgid ""
"Switching the printer technology from %1% to %2%.\n"
"Some %1% presets were modified, which will be lost after switching the "
"printer technology."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5195
msgid "Creating a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5198
msgid "Creating a new project while some presets are modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5199
msgid "You can keep presets modifications to the new project or discard them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5200
msgid ""
"You can keep presets modifications to the new project, discard them or save "
"changes as new presets.\n"
"Note, if changes will be saved then new project wouldn't keep them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5205
msgid "Creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5239
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5269
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5273
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5302
msgid "Import SLA archive"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5366 src/slic3r/GUI/Plater.cpp:5376
msgid "does not contain valid gcode."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5367 src/slic3r/GUI/Plater.cpp:5377
msgid "Error while loading .gcode file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5444
#, boost-format
msgid "%1% - Multiple projects file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5454
msgid "There are several files being loaded, including Project files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5454 src/slic3r/GUI/Plater.cpp:5457
msgid "Select an action to apply to all files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5457
msgid "There are several files being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5459 src/slic3r/GUI/Plater.cpp:5855
msgid "Action"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5480
msgid "Import 3D models"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5493
msgid "Start a new instance of PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5507
msgid "Select one to load as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5518
msgid "Select only one file to load the configuration."
msgstr ""

#. TRN %1% is archive path
#: src/slic3r/GUI/Plater.cpp:5565
#, boost-format
msgid "Loading of a ZIP archive on path %1% has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5624
#, boost-format
msgid "Failed to unzip file to %1%: %2% "
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5634
#, boost-format
msgid "Failed to find unzipped file at %1%. Unzipping of file has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5834
msgid "Load project file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5843
msgid "Open as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5844
msgid "Import 3D models only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5845
msgid "Import config only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5847
msgid "Start new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5850
msgid "Select an action to apply to the file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5871
msgid "Don't show again"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5912
msgid "You can open only one .gcode file at a time."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5913
msgid "Drag and drop G-code file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6007
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6012
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6062
msgid "All objects will be removed, continue?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6073
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6082
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6138
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6196
msgid "Enter the number of copies:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6197
msgid "Copies of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6200
#, c-format, boost-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6221
msgid "Fill bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6363
msgid "Save G-code file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6363
msgid "Save SL1 / SL1S file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6376
msgid "The provided file name is not valid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6377
msgid "The following characters are not allowed by a FAT file system:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6437
msgid ""
"Unable to perform boolean operation on model meshes. Only positive parts "
"will be exported."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6591
msgid ""
"The plater is empty.\n"
"Do you want to save the project?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6591
msgid "Save project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6826
msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6826 src/slic3r/GUI/PrintHostDialogs.cpp:132
msgid "Upload and Print"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:7239
msgid "Export"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:7384
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:222 src/slic3r/GUI/Tab.cpp:2386
#: src/slic3r/GUI/Tab.cpp:2655 src/slic3r/GUI/Tab.cpp:2773
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1305
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1860
msgid "General"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:240
msgid "Remember output directory"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:241
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:245
msgid "Auto-center parts"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:246
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:250
msgid "Background processing"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:251
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:256
msgid "Alert when supports needed"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:257
msgid ""
"If this is enabled, Slic3r will raise alerts when it detects issues in the "
"sliced object, that can be resolved with supports (and brim). Examples of "
"such issues are floating object parts, unsupported extrusions and low bed "
"adhesion."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:267
msgid "Export sources full pathnames to 3mf and amf"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:268
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:275
msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:280
msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:289
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:294
msgid "Suppress \" - default - \" presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:295
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:299
msgid "Suppress \" Template \" filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:300
msgid ""
"Suppress \" Template \" filament presets in configuration wizard and sidebar "
"visibility."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:304
msgid "Show incompatible print and filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:305
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:312
msgid "Show load project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:313
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application or open it from a browser, shows a dialog asking to select the "
"action to take on the file to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:319 src/slic3r/GUI/Preferences.cpp:323
msgid "Allow just a single PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:320
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:324
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:332
msgid ""
"Always ask for unsaved changes in project, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:340
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:928
msgid ""
"Ask to save unsaved changes in presets when closing the application or when "
"loading a new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:341
msgid ""
"Always ask for unsaved changes in presets, when: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:347
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:927
msgid "Ask for unsaved changes in presets when selecting new preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:348
msgid ""
"Always ask for unsaved changes in presets when selecting new preset or "
"resetting a preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:352
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:926
msgid "Ask for unsaved changes in presets when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:353
msgid "Always ask for unsaved changes in presets when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:359
msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:360
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"gcode files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:367
msgid "Use Retina resolution for the 3D scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:368
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:377 src/slic3r/GUI/Preferences.cpp:378
msgid "Show splash screen"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:383
msgid "If enabled, PrusaSlicer will be open at the position it was closed"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:388
msgid "Clear Undo / Redo stack on new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:389
msgid ""
"Clear Undo / Redo stack on new project or when an existing project is loaded."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:394
msgid "Enable support for legacy 3DConnexion devices"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:395
msgid ""
"If enabled, the legacy 3DConnexion devices settings dialog is available by "
"pressing CTRL+M"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:402
msgid "Camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:412
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:413
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:417
msgid "Use free camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:418
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:422
msgid "Reverse direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:423
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:429
msgid "GUI"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:469
msgid "Sequential slider applied only to top layer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:470
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer. If disabled, changes made using the sequential slider, "
"in preview, apply to the whole gcode."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:476
msgid "Show sidebar collapse/expand button"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:477
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:488
msgid "Use colors for axes values in Manipulation panel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:489
msgid ""
"If enabled, the axes names and axes values will be colorized according to "
"the axes colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:494
msgid "Order object volumes by types"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:495
msgid ""
"If enabled, volumes will be always ordered inside the object. Correct order "
"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
"Modifiers. But one of the model parts have to be on the first place."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:500
msgid "Show non-manifold edges"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:501
msgid "If enabled, shows non-manifold edges."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:505
msgid "Allow automatically color change"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:506
msgid ""
"If enabled, related notification will be shown, when sliced object looks "
"like a logo or a sign."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:511
msgid "Set settings tabs as menu items (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:512
msgid ""
"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI "
"will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:519
msgid "Show \"Tip of the day\" notification after start"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:520
msgid "If enabled, useful hints are displayed at startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:524
msgid "Notify about new releases"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:525
msgid ""
"You will be notified about new release after startup acordingly: All = "
"Regular release and alpha / beta releases. Release only = regular release."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:528
msgid "Release only"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:535
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:536
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:554 src/slic3r/GUI/Tab.cpp:1671
msgid "Other"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:571
msgid "If enabled, PrusaSlicer will not open a hyperlinks in your browser."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:577
msgid "Allow downloads from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:578
msgid "If enabled, PrusaSlicer will be allowed to download from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:588
msgid "Render"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:598
msgid "Use environment map"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:599
msgid "If enabled, renders object using the environment map."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:607
msgid "Dark mode (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:617
msgid "Enable dark mode"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:618
msgid ""
"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:625
msgid "Use system menu for application"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:626
msgid ""
"If enabled, application will use the standard Windows system menu,\n"
"but on some combination of display scales it can look ugly. If disabled, old "
"UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:702
msgid "Changes for the critical options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:704
msgid ""
"Changing some options will trigger application restart.\n"
"You will lose the content of the plater."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:897
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:912
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:947
msgid "Layout Options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:956
msgid "Old regular layout with the tab bar"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:957
msgid "New layout, access via settings button in the top menu"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:958
msgid "Settings in non-modal window"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1000
msgid "Text colors"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1024
msgid "Mode markers"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1052
msgid "Application font size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1087
msgid "Revert font to default"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1099
msgid "Font size"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:254
#: src/slic3r/GUI/PresetComboBoxes.cpp:306
#: src/slic3r/GUI/PresetComboBoxes.cpp:844
#: src/slic3r/GUI/PresetComboBoxes.cpp:911
#: src/slic3r/GUI/PresetComboBoxes.cpp:1078
#: src/slic3r/GUI/PresetComboBoxes.cpp:1135
msgid "System presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:310
#: src/slic3r/GUI/PresetComboBoxes.cpp:917
#: src/slic3r/GUI/PresetComboBoxes.cpp:1140
msgid "User presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:321
msgid "Incompatible presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:364
#, boost-format
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:366
msgid "Delete Physical Printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:612
msgid "Click to edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:734
#: src/slic3r/GUI/PresetComboBoxes.cpp:782
msgid "Add/Remove presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:739
#: src/slic3r/GUI/PresetComboBoxes.cpp:787 src/slic3r/GUI/Tab.cpp:3503
msgid "Add physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:753
msgid "Edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:759
msgid "Change extruder color"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:767 src/slic3r/GUI/Tab.cpp:3503
msgid "Edit physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:773
msgid "Open the physical printer URL"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:778
msgid "Delete physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:925
#: src/slic3r/GUI/PresetComboBoxes.cpp:1151
msgid "Template presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:936
#: src/slic3r/GUI/PresetComboBoxes.cpp:1165
msgid "Physical printers"
msgstr "Fyysiset tulostimet"

#: src/slic3r/GUI/PresetComboBoxes.cpp:960
msgid "Add/Remove filaments"
msgstr "Lisää/Poista tulostuslankoja"

#: src/slic3r/GUI/PresetComboBoxes.cpp:962
msgid "Add/Remove materials"
msgstr "Lisää/Poista materiaaleja"

#: src/slic3r/GUI/PresetComboBoxes.cpp:964
#: src/slic3r/GUI/PresetComboBoxes.cpp:1189
msgid "Add/Remove printers"
msgstr "Lisää/Poista tulostimia"

#: src/slic3r/GUI/PresetHints.cpp:32
#, boost-format
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:40
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:44
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at "
"%2%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:55
#, boost-format
msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "During the other layers, fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "Fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:59
#, boost-format
msgid "except for the first %1% layers."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:61
msgid "except for the first layer."
msgstr "paitsi ensimmäiselle kerrokselle."

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "During the other layers, fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "Fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:170
msgid "external perimeters"
msgstr "ulkoiset kehät"

#: src/slic3r/GUI/PresetHints.cpp:171
msgid "perimeters"
msgstr "kehät"

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:176
msgid "solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:178
msgid "top solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "support"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "support interface"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "First layer volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Bridging volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:188
msgid "flow rate is maximized"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "by the print profile maximum"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "when printing"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:193
msgid "with a volumetric rate"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:197
#, c-format, boost-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:215
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:221
#, c-format, boost-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:236
#, c-format, boost-format
msgid "%d lines: %.2f mm"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:240
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:269
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:282
#, boost-format
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:285
#, boost-format
msgid "Minimum top shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:288
msgid "Top is open."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:301
#, boost-format
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:304
#, boost-format
msgid "Minimum bottom shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:307
msgid "Bottom is open."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Send G-Code to printer host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Upload to Printer Host with the following filename:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:55
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:64
msgid "Group"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:74
#: src/slic3r/GUI/PrintHostDialogs.cpp:83
msgid "Upload to storage"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:105
#, c-format, boost-format
msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:112
msgid "Upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:122
msgid "Upload to Queue"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:143
msgid "Upload and Simulate"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:298
msgid "ID"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:299
msgid "Progress"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:300
msgid "Status"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:301
msgid "Host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:302
msgctxt "OfFile"
msgid "Size"
msgstr "Koko"

#: src/slic3r/GUI/PrintHostDialogs.cpp:303
msgid "Filename"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:304
msgid "Message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:308
msgid "Cancel selected"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:310
msgid "Show error message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:368
#: src/slic3r/GUI/PrintHostDialogs.cpp:423
msgid "Enqueued"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:424
msgid "Uploading"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:426
msgid "Cancelling"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:427
msgid "Cancelled"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:428
msgid "Completed"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:476
msgid "Error uploading to print host"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:29
msgid "NO RAMMING AT ALL"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:116
#: src/libslic3r/PrintConfig.cpp:1042 src/libslic3r/PrintConfig.cpp:1086
#: src/libslic3r/PrintConfig.cpp:1101 src/libslic3r/PrintConfig.cpp:3643
#: src/libslic3r/PrintConfig.cpp:3652 src/libslic3r/PrintConfig.cpp:3661
#: src/libslic3r/PrintConfig.cpp:3807 src/libslic3r/PrintConfig.cpp:3815
#: src/libslic3r/PrintConfig.cpp:3823 src/libslic3r/PrintConfig.cpp:3830
#: src/libslic3r/PrintConfig.cpp:3838 src/libslic3r/PrintConfig.cpp:3846
msgid "s"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:95
msgid "Volumetric speed"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:999
#: src/libslic3r/PrintConfig.cpp:1867
msgid "mm³/s"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:91
#: src/slic3r/GUI/SavePresetDialog.cpp:92
msgid "Save print settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:93
msgid "Save filament settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:94
msgid "Save material settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:95
msgid "Save printer settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:169
msgid "The following characters are not allowed in the name"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:176
msgid "The following suffix is not allowed in the name"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:182
msgid "This name is reserved, use another."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:188
msgid "This name is used for a system profile name, use another."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:189
msgid "Cannot overwrite a system profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:194
msgid "This name is used for an external profile name, use another."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:195
msgid "Cannot overwrite an external profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:205
msgid "Save preset modifications to existing user profile"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:210
#, boost-format
msgid "Preset with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:212
#, boost-format
msgid ""
"Preset with name \"%1%\" already exists and is incompatible with selected "
"printer."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:213
msgid "Note: This preset will be replaced after saving"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:219
msgid "The name cannot be empty."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:230
msgid "The name is too long."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:235
msgid "The name cannot start with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:240
msgid "The name cannot end with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:245
msgid "The name cannot be the same as a preset alias name."
msgstr ""

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/SavePresetDialog.cpp:289 src/slic3r/GUI/Tab.cpp:169
msgid "Save preset"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:289
msgid "Save presets"
msgstr ""

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/SavePresetDialog.cpp:297 src/slic3r/GUI/Tab.cpp:171
msgid "Rename preset"
msgstr ""

#. TRN Suffix for the preset name. Have to be a noun.
#: src/slic3r/GUI/SavePresetDialog.cpp:325
#, fuzzy
msgctxt "PresetName"
msgid "Copy"
msgstr "Kopioi"

#: src/slic3r/GUI/SavePresetDialog.cpp:345
msgid "Save as profile derived from current printer only."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:405
#, boost-format
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:444
#, boost-format
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:447
#, boost-format
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:448
#, boost-format
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:449
#, boost-format
msgid "Just switch to \"%1%\" preset"
msgstr ""

#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
#: src/slic3r/GUI/Tab.cpp:2822
msgid "Stealth"
msgstr ""

#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
#: src/slic3r/GUI/Tab.cpp:2816
msgid "Normal"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:169
msgid "Selection-Add"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:210
msgid "Selection-Remove"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:242
msgid "Selection-Add Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:261
msgid "Selection-Remove Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:279
msgid "Selection-Add Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:298
msgid "Selection-Remove Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:395
msgid "Selection-Add All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:420
msgid "Selection-Remove All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1080
msgid "Scale To Fit"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1415
msgid ""
"The currently manipulated object is tilted or contains tilted parts "
"(rotation angles are not multiples of 90°). Non-uniform scaling of tilted "
"objects is only possible in non-local coordinate systems, once the rotation "
"is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1418
msgid "This operation is irreversible."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:117
msgid "Data to send"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:557
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:624
msgid "Send system info"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:587
#, boost-format
msgid ""
"This is the first time you are running %1%. We would like to ask you to send "
"some of your system information to us. This will only happen once and we "
"will not ask you to do this again (only after you upgrade to the next "
"version)."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:591
msgid ""
"If we know your hardware, operating system, etc., it will greatly help us in "
"development and prioritization, because we will be able to focus our effort "
"more efficiently and spend time on features that are needed the most."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:594
msgid "Is it safe?"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:596
#, boost-format
msgid ""
"We do not send any personal information nor anything that would allow us to "
"identify you later. To detect duplicate entries, a unique number derived "
"from your system is sent, but the source information cannot be "
"reconstructed. Apart from that, only general data about your OS, hardware "
"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
"inspect the code actually performing the communication, see %1%."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:620
msgid "Show verbatim data that will be sent"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:622
msgid "Ask me next time"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:623
msgid "Do not send anything"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:709
msgid "System info sent successfully. Thank you."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:712
msgid "Sending system info failed!"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:719
msgid "Sending system info was cancelled."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:726
msgid "Sending system info..."
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:92
msgid "System Information"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:160
msgid "Blacklisted libraries loaded into PrusaSlicer process:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:172
msgid "Eigen vectorization supported:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:179
msgid "Copy to Clipboard"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:69 src/libslic3r/PrintConfig.cpp:666
msgid "Compatible printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:70
msgid "Select the printers this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:75 src/libslic3r/PrintConfig.cpp:681
msgid "Compatible print profiles"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:76
msgid "Select the print profiles this profile is compatible with."
msgstr ""

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/Tab.cpp:167
msgid "Compare preset with another"
msgstr ""

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/Tab.cpp:174
msgid "Delete preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:178
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:182
#, boost-format
msgid "Search in settings [%1%]"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1250
msgid "Detach from system preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1263
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1264
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1267
msgid "Modifications to the current profile will be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1273
msgid "Detach preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1299
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1301
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1303
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1307
msgid "Current preset is inherited from"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1311
msgid "It can't be deleted or modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1312
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1313
msgid "To do that please specify a new name for the preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1317
msgid "Additional information:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1323
msgid "printer model"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1331
msgid "default print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1334
msgid "default filament profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1348
msgid "default SLA material profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1352
msgid "default SLA print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1360
msgid "full profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1361
msgid "symbolic profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1399 src/slic3r/GUI/Tab.cpp:5144
msgid "Layers and perimeters"
msgstr "Kerrokset ja kehät"

#: src/slic3r/GUI/Tab.cpp:1405
msgid "Vertical shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1417
msgid "Horizontal shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1418 src/libslic3r/PrintConfig.cpp:2457
msgid "Solid layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1423
msgid "Minimum shell thickness"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1434
msgid "Quality (slower slicing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1451
msgid "Fuzzy skin (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1474
msgid "Reducing printing time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1489 src/libslic3r/ExtrusionRole.cpp:77
msgid "Skirt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1511
msgid "Raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1516
msgid "Options for support material and raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1535
msgid "Organic supports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1546
msgid "Speed for print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1559
msgid "Dynamic overhang speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1566
msgid "Speed for non-print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1570
msgid "Modifiers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1574
msgid "Acceleration control (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1586
msgid "Autospeed (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1590
msgid "Pressure equalizer (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1594
msgid "Multiple Extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1602
msgid "Ooze prevention"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1606 src/libslic3r/ExtrusionRole.cpp:50
#: src/libslic3r/ExtrusionRole.cpp:83
msgid "Wipe tower"
msgstr "Pyyhkäisytorni"

#: src/slic3r/GUI/Tab.cpp:1624
msgid "Extrusion width"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1634
msgid "Overlap"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1637
msgid "Flow"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1648
msgid "Arachne perimeter generator"
msgstr "Arachne-kehägeneraattori"

#: src/slic3r/GUI/Tab.cpp:1656 src/slic3r/GUI/Tab.cpp:5193
msgid "Output options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1657
msgid "Sequential printing"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1659
msgid "Extruder clearance"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1664 src/slic3r/GUI/Tab.cpp:5194
msgid "Output file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1683 src/libslic3r/PrintConfig.cpp:2080
msgid "Post-processing scripts"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1695 src/slic3r/GUI/Tab.cpp:1696
#: src/slic3r/GUI/Tab.cpp:2148 src/slic3r/GUI/Tab.cpp:2149
#: src/slic3r/GUI/Tab.cpp:2636 src/slic3r/GUI/Tab.cpp:2637
#: src/slic3r/GUI/Tab.cpp:2714 src/slic3r/GUI/Tab.cpp:2715
#: src/slic3r/GUI/Tab.cpp:4369 src/slic3r/GUI/Tab.cpp:5026
#: src/slic3r/GUI/Tab.cpp:5027
msgid "Notes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1702 src/slic3r/GUI/Tab.cpp:2156
#: src/slic3r/GUI/Tab.cpp:2643 src/slic3r/GUI/Tab.cpp:2721
#: src/slic3r/GUI/Tab.cpp:5034 src/slic3r/GUI/Tab.cpp:5199
msgid "Dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1703 src/slic3r/GUI/Tab.cpp:2157
#: src/slic3r/GUI/Tab.cpp:2644 src/slic3r/GUI/Tab.cpp:2722
#: src/slic3r/GUI/Tab.cpp:5035 src/slic3r/GUI/Tab.cpp:5200
msgid "Profile dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1735
msgid "Post processing scripts shall modify G-code file in place."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1814
#, c-format, boost-format
msgid ""
"The following line %s contains reserved keywords.\n"
"Please remove it, as it may cause problems in G-code visualization and "
"printing time estimation."
msgid_plural ""
"The following lines %s contain reserved keywords.\n"
"Please remove them, as they may cause problems in G-code visualization and "
"printing time estimation."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:1819
msgid "Found reserved keywords in"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1881
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1882 src/slic3r/GUI/Tab.cpp:3016
msgid "Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2019
msgid "Temperature"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2023
msgid "Nozzle"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2028
msgid "Bed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2033
msgid "Cooling"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2035 src/libslic3r/PrintConfig.cpp:1975
#: src/libslic3r/PrintConfig.cpp:3137
msgid "Enable"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2046
msgid "Fan settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2047
msgid "Fan speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2057
msgid "Dynamic fan speeds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2064
msgid "Cooling thresholds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2070
msgid "Filament properties"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2077
msgid "Print speed override"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2087
msgid "Wipe tower parameters"
msgstr "Pyyhkäisytornin asetukset"

#: src/slic3r/GUI/Tab.cpp:2090
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2103
msgid "Ramming settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2127 src/slic3r/GUI/Tab.cpp:2545
#: src/slic3r/GUI/Tab.cpp:4680 src/libslic3r/GCode.cpp:792
#: src/libslic3r/PrintConfig.cpp:2552
msgid "Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2128 src/slic3r/GUI/Tab.cpp:2546
#: src/libslic3r/GCode.cpp:766 src/libslic3r/PrintConfig.cpp:2507
#: src/libslic3r/PrintConfig.cpp:2517
msgid "Start G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2138 src/slic3r/GUI/Tab.cpp:2559
#: src/libslic3r/GCode.cpp:767 src/libslic3r/PrintConfig.cpp:786
#: src/libslic3r/PrintConfig.cpp:796
msgid "End G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2183
msgid "Volumetric flow hints not available"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2347
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2366
msgid ""
"Emitting machine limits to G-code is not supported with Klipper G-code "
"flavor.\n"
"The option was switched to \"Use for time estimate\"."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2387 src/slic3r/GUI/Tab.cpp:2656
msgid "Size and coordinates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2396 src/slic3r/GUI/UnsavedChangesDialog.cpp:1305
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1860
msgid "Capabilities"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2401
msgid "Number of extruders of the printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2434
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2437 src/slic3r/GUI/Tab.cpp:2894
#: src/libslic3r/PrintConfig.cpp:1943
msgid "Nozzle diameter"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2519
msgid ""
"The selected G-code flavor does not support the machine limitation for "
"Stealth mode.\n"
"Stealth mode will not be applied and will be disabled."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2527
msgid "G-code flavor is switched"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2556
msgid "Start G-Code options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2569 src/libslic3r/GCode.cpp:768
#: src/libslic3r/PrintConfig.cpp:442
msgid "Before layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2579 src/libslic3r/GCode.cpp:769
#: src/libslic3r/PrintConfig.cpp:1672
msgid "After layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2589 src/libslic3r/GCode.cpp:770
#: src/libslic3r/PrintConfig.cpp:3021
msgid "Tool change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2599 src/libslic3r/GCode.cpp:771
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2609 src/libslic3r/GCode.cpp:772
msgid "Color Change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2618 src/libslic3r/GCode.cpp:773
#: src/libslic3r/PrintConfig.cpp:2543
msgid "Pause Print G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2627 src/libslic3r/GCode.cpp:774
msgid "Template Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2663
msgid "Display"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2678
msgid "Tilt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2679
msgid "Tilt time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2686 src/slic3r/GUI/Tab.cpp:5016
msgid "Corrections"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2699 src/slic3r/GUI/Tab.cpp:5012
msgid "Exposure"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2706
msgid "Output"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2771 src/slic3r/GUI/Tab.cpp:3064
#: src/libslic3r/PrintConfig.cpp:1701 src/libslic3r/PrintConfig.cpp:1734
#: src/libslic3r/PrintConfig.cpp:1751 src/libslic3r/PrintConfig.cpp:1768
#: src/libslic3r/PrintConfig.cpp:1784 src/libslic3r/PrintConfig.cpp:1794
#: src/libslic3r/PrintConfig.cpp:1804 src/libslic3r/PrintConfig.cpp:1815
#: src/libslic3r/PrintConfig.cpp:1826
msgid "Machine limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2815
msgid "Values in this column are for Normal mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2821
msgid "Values in this column are for Stealth mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2830
msgid "Maximum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2835
msgid "Maximum accelerations"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2844
msgid "Jerk limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2850
msgid "Minimum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2891
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2928
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2964
msgid "Apply below setting to other extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3009
msgid "Layer height limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3013
msgid "Position (for multi-extruder printers)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3019
msgid "Only lift Z"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3032
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3089 src/slic3r/GUI/Tab.cpp:3098
msgid "Single extruder MM setup"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3099
msgid "Single extruder multimaterial parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3264
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3266
msgid "Firmware Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3575
msgid "New printer preset selected"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3948
msgid "Detached"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4044
msgid ""
"The physical printer below is based on the preset, you are going to rename."
msgid_plural ""
"The physical printers below are based on the preset, you are going to rename."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:4049
msgid "Note, that the selected preset will be renamed in this printer too."
msgid_plural ""
"Note, that the selected preset will be renamed in these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:4111
msgid "remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4111
msgid "delete"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4119
msgid "It's a last preset for this physical printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4124
#, boost-format
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4136
msgid ""
"The physical printer below is based on the preset, you are going to delete."
msgid_plural ""
"The physical printers below are based on the preset, you are going to delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:4141
msgid "Note, that the selected preset will be deleted from this printer too."
msgid_plural ""
"Note, that the selected preset will be deleted from these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:4146
msgid ""
"The physical printer below is based only on the preset, you are going to "
"delete."
msgid_plural ""
"The physical printers below are based only on the preset, you are going to "
"delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:4151
msgid ""
"Note, that this printer will be deleted after deleting the selected preset."
msgid_plural ""
"Note, that these printers will be deleted after deleting the selected preset."
msgstr[0] ""
msgstr[1] ""

#. TRN "remove/delete"
#: src/slic3r/GUI/Tab.cpp:4157
#, boost-format
msgid "Are you sure you want to %1% the selected preset?"
msgstr ""

#. TRN Settings Tabs: Button in toolbar: "Remove/Delete"
#: src/slic3r/GUI/Tab.cpp:4162
#, boost-format
msgid "%1% Preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4248 src/slic3r/GUI/Tab.cpp:4610
msgid "Set"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4367
msgid "Find"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4368
msgid "Replace with"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4457
msgid "Regular expression"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4461
msgid "Case insensitive"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4465
msgid "Whole word"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4469
msgid "Match single line"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4572
msgid "Are you sure you want to delete all substitutions?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4710
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4713
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4717
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4739
msgid "LOCKED LOCK"
msgstr ""

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4741
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4743
msgid "UNLOCKED LOCK"
msgstr ""

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4745
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4750
msgid "WHITE BULLET"
msgstr ""

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:4752
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4755
msgid "BACK ARROW"
msgstr ""

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:4757
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4767
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4769
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4772
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4775
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4777
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4783
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4784
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4790
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4791
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4968 src/slic3r/GUI/Tab.cpp:4970
msgid "Material"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5055 src/slic3r/GUI/Tab.cpp:5056
msgid "Material printing profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5105
msgid "Support head"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5110
msgid "Support pillar"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5133
msgid "Connection of the support sticks and junctions"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5157
msgid "Branching"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5159
msgid "Automatic generation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5227
#, boost-format
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5229 src/libslic3r/PrintConfig.cpp:3571
msgid "Object elevation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5229 src/libslic3r/PrintConfig.cpp:4036
msgid "Pad around object"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:147
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:156
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:165
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1110
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1125
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1140
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1155
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1200
msgid "Undef"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:792
msgid "Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:810
msgid "Switching Presets: Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:860
msgid "Original value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:861
msgid "Modified value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
msgid "New value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
msgid "Keep"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1574
msgid "Transfer"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:901
msgid "Don't save"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:929
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"create new project"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:930
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"switch a preset"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:931
msgid ""
"You will not be asked about the unsaved changes in presets the next time "
"you: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:934
msgid "PrusaSlicer will remember your action."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:967
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1778
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
msgid "All settings changes will not be saved"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
msgid "All settings changes will be discarded."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:972
msgid "Save the selected options."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:973
msgid "Keep the selected settings."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:974
msgid "Transfer the selected settings to the newly selected preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:978
#, boost-format
msgid "Save the selected options to preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:979
#, boost-format
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1240
msgid "The following preset was modified"
msgid_plural "The following presets were modified"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1246
#, boost-format
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1250
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1251
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1300
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1856
msgid "Extruders count"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1329
msgid "The preset modifications are successfully saved"
msgid_plural "The presets modifications are successfully saved"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
msgid "Show all presets (including incompatible)"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1538
msgid "Select presets to compare"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1550
msgid "Left Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1551
msgid "Right Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1600
msgid ""
"Transfer the selected options from left preset to the right.\n"
"Note: New modified presets will be selected in settings tabs after close "
"this dialog."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1608
msgid "Save the selected options from left preset to the right."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
msgid "Transfer values from left to right"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1627
msgid ""
"If enabled, this dialog can be used for transver selected values from left "
"to right preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1813
msgid "One of the presets doesn't found"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1824
msgid "Compared presets has different printer technology"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1838
msgid "Presets are the same"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1846
msgid ""
"Presets are different.\n"
"Click this button to select the same preset for the right and left preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1870
msgid "Undef category"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1870
msgid "Undef group"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:2022
msgid "Modified"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:41
msgid "Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:41
#, c-format, boost-format
msgid "New version of %s is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:46 src/slic3r/GUI/UpdateDialogs.cpp:101
msgid "Current version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:48 src/slic3r/GUI/UpdateDialogs.cpp:103
msgid "New version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:56
msgid "Changelog & Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:63 src/slic3r/GUI/UpdateDialogs.cpp:309
#: src/slic3r/GUI/UpdateDialogs.cpp:367
msgid "Open changelog page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:69
msgid "Open download page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:76 src/slic3r/GUI/UpdateDialogs.cpp:109
msgid "Don't notify about new releases any more"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:98
msgid "App Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:98
#, c-format, boost-format
msgid ""
"New version of %s is available.\n"
"Do you wish to download it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:120
msgid "Next"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:138
msgid "App Update download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:138
#, boost-format
msgid "New version of %1% is available."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:141
msgid "New version"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:146
msgid "Run installer after download. (Otherwise file explorer will be opened)"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
msgid "Target directory"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:158 src/slic3r/GUI/UpdateDialogs.cpp:176
msgid "Select directory"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:204
msgid "Directory path is empty."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:212
msgid "Directory path is incorrect."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:217
#, boost-format
msgid "Directory %1% doesn't exists. Do you wish to create it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:222
msgid "Failed to create directory."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:229
#, boost-format
msgid "File %1% already exists. Do you wish to overwrite it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:234
#, boost-format
msgid "Download path is %1%. Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270
msgid "Opening Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270 src/slic3r/GUI/UpdateDialogs.cpp:437
msgid "Configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:271
msgid ""
"PrusaSlicer is not using the newest configuration available.\n"
"Configuration Wizard may not offer the latest printers, filaments and SLA "
"materials to be installed."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:273
msgid "Configuration update is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:276
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"Haluaisitko ladata sen?\n"
"\n"
"Huomaa että täysi kokoonpanot tilannekuva luodaan ensin, se voidaan "
"palauttaa milloin tahansa jos uuden version kanssa ilmenee ongelmia\n"
"Päivitetyt konfiguraatiopaketit:"

#: src/slic3r/GUI/UpdateDialogs.cpp:297 src/slic3r/GUI/UpdateDialogs.cpp:357
msgid "Comment:"
msgstr "Kommentti:"

#: src/slic3r/GUI/UpdateDialogs.cpp:318
msgid "Install"
msgstr "Lataa"

#: src/slic3r/GUI/UpdateDialogs.cpp:320
msgid "Don't install"
msgstr "Älä lataa"

#: src/slic3r/GUI/UpdateDialogs.cpp:333 src/slic3r/GUI/UpdateDialogs.cpp:388
#, c-format, boost-format
msgid "%s incompatibility"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:333
msgid "You must install a configuration update."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:336
#, c-format, boost-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:389
#, c-format, boost-format
msgid "%s configuration is incompatible"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:392
#, c-format, boost-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:401
#, c-format, boost-format
msgid "This %s version: %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:406
msgid "Incompatible bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:422
msgid "Re-configure"
msgstr "Määritä uudelleen"

#: src/slic3r/GUI/UpdateDialogs.cpp:440
#, c-format, boost-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:455
msgid "For more information please visit our wiki page:"
msgstr ""

#. TRN %s = PrusaSlicer
#: src/slic3r/GUI/UpdateDialogs.cpp:459
#, c-format, boost-format
msgid "%s 1.40 configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:473
msgid "Configuration updates"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:473 src/slic3r/GUI/UpdateDialogs.cpp:493
msgid "No updates available"
msgstr "Ei päivityksiä saatavilla"

#: src/slic3r/GUI/UpdateDialogs.cpp:478
#, c-format, boost-format
msgid "%s has no configuration updates available."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:493
msgid "App update"
msgstr ""

#. TRN %1% is PrusaSlicer
#: src/slic3r/GUI/UpdateDialogs.cpp:496
#, boost-format
msgid "Your %1% is up to date."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:23
msgid "Ramming customization"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:56
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:116
msgid "Total ramming time"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:118
msgid "Total rammed volume"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:122
msgid "Ramming line width"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:124
msgid "Ramming line spacing"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:175
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:301
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:302
msgid "Extruder changed to"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:310
msgid "unloaded"
msgstr "purettu"

#: src/slic3r/GUI/WipeTowerDialog.cpp:311
msgid "loaded"
msgstr "ladattu"

#: src/slic3r/GUI/WipeTowerDialog.cpp:354
msgid "Tool #"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:363
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:364
msgid "Volume to purge (mm³) when the filament is being"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:378
msgid "From"
msgstr "Mistä"

#: src/slic3r/GUI/WipeTowerDialog.cpp:444
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:456
msgid "Show simplified settings"
msgstr "Näytä yksinkertaistetut asetukset"

#: src/slic3r/GUI/WipeTowerDialog.cpp:456
msgid "Show advanced settings"
msgstr "Näytä kehittyneet asetukset"

#: src/slic3r/GUI/wxExtensions.cpp:628
#, c-format, boost-format
msgid "Switch to the %s mode"
msgstr "Vaihda tilaan %s"

#: src/slic3r/GUI/wxExtensions.cpp:629
#, c-format, boost-format
msgid "Current mode is %s"
msgstr "Tämänhetkinen tila on %s"

#: src/slic3r/GUI/wxExtensions.cpp:714
msgctxt "Mode"
msgid "Advanced"
msgstr "Kehittynyt tila"

#: src/slic3r/Utils/AstroBox.cpp:70 src/slic3r/Utils/OctoPrint.cpp:206
#: src/slic3r/Utils/OctoPrint.cpp:255 src/slic3r/Utils/OctoPrint.cpp:643
#: src/slic3r/Utils/OctoPrint.cpp:806 src/slic3r/Utils/OctoPrint.cpp:879
#: src/slic3r/Utils/Repetier.cpp:88
#, c-format, boost-format
msgid "Mismatched type of print host: %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:85
msgid "Connection to AstroBox works correctly."
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:91
msgid "Could not connect to AstroBox"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:93
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:42
#, boost-format
msgid ""
"Running downloaded instaler of %1% has failed:\n"
"%2%"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:206
#, boost-format
msgid "Internal download error for url %1%:"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:207
msgid "Destination path is empty."
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:223
#, boost-format
msgid "Download from %1% couldn't start:"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:265
#, boost-format
msgid "Downloaded file has wrong size. Expected size: %1% Downloaded size: %2%"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:280
#, boost-format
msgid ""
"Failed to write to file or to move %1% to %2%:\n"
"%3%"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:296
#, boost-format
msgid ""
"Downloading new %1% has failed:\n"
"%2%"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:48
msgid "Connection to Duet works correctly."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:87 src/slic3r/Utils/Duet.cpp:156
#: src/slic3r/Utils/FlashAir.cpp:123 src/slic3r/Utils/FlashAir.cpp:144
#: src/slic3r/Utils/FlashAir.cpp:160
msgid "Unknown error occured"
msgstr "Tuntematon virhe tapahtui"

#: src/slic3r/Utils/Duet.cpp:150
msgid "Wrong password"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:153
msgid "Could not get resources to create a new connection"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:221
#: src/slic3r/Utils/FixModelByWin10.cpp:361
msgid "Exporting source model"
msgstr "Viedään lähdemallia"

#: src/slic3r/Utils/FixModelByWin10.cpp:244
msgid "Repairing model by the Netfabb service"
msgstr "Korjataan mallia Netfabb-palvelulla"

#: src/slic3r/Utils/FixModelByWin10.cpp:253
#: src/slic3r/Utils/FixModelByWin10.cpp:388
msgid "Loading repaired model"
msgstr "Ladataan korjattua mallia"

#: src/slic3r/Utils/FixModelByWin10.cpp:412
msgid "Model repair finished"
msgstr "Mallin korjaus valmis"

#: src/slic3r/Utils/FixModelByWin10.cpp:418
msgid "Model repair canceled"
msgstr "Mallin korjaus peruttu"

#: src/slic3r/Utils/FlashAir.cpp:59
msgid "Upload not enabled on FlashAir card."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:69
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:75
msgid "Could not connect to FlashAir"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:77
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:278
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:284
msgid "Could not connect to OctoPrint"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:286
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:525
msgid "Connection to Prusa SL1 / SL1S works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:530
msgid "Could not connect to Prusa SLA"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:552
msgid "Connection to PrusaLink works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:557
msgid "Could not connect to PrusaLink"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:753
msgid "Storages found"
msgstr ""

#. TRN %1% = storage path
#: src/slic3r/Utils/OctoPrint.cpp:757
#, boost-format
msgid "%1% : read only"
msgstr ""

#. TRN %1% = storage path
#: src/slic3r/Utils/OctoPrint.cpp:759
#, boost-format
msgid "%1% : no free space"
msgstr ""

#. TRN %1% = host
#: src/slic3r/Utils/OctoPrint.cpp:763
#, boost-format
msgid "Upload has failed. There is no suitable storage found at %1%."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:1122
msgid "Connection to Prusa Connect works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:1127
msgid "Could not connect to Prusa Connect"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:64
#, boost-format
msgid "Copying of file %1% to %2% failed: %3%"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:998
#: src/slic3r/Utils/PresetUpdater.cpp:1015
msgid "Continue and install configuration updates?"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1021
msgid "Installing profiles"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1071
#, boost-format
msgid "Downloading resources for %1%."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1171
msgid ""
"Configuration Update will cause the preset modification to be lost.\n"
"So, check unsaved changes and save them if necessary."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1173
msgid "Updating"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1202
#, c-format, boost-format
msgid "requires min. %s and max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1206
#, c-format, boost-format
msgid "requires min. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1209
#, c-format, boost-format
msgid "requires max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1334
#, boost-format
msgid ""
"Couldn't locate index file for vendor %1% when performing updates. The "
"profile will not be installed."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1344
#, boost-format
msgid ""
"Couldn't load index file for vendor %1% when performing updates. The profile "
"will not be installed. Reason: Corrupted index file %2%."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1382
#, boost-format
msgid ""
"Couldn't open profile file for vendor %1% when performing updates. The "
"profile will not be installed. This installation might be corrupted."
msgstr ""

#: src/slic3r/Utils/Http.cpp:73
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr ""

#: src/slic3r/Utils/Http.cpp:78
#, boost-format
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr ""

#: src/slic3r/Utils/Http.cpp:82
#, boost-format
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""

#: src/slic3r/Utils/Http.cpp:91
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""

#: src/slic3r/Utils/Process.cpp:164
msgid "Open G-code file:"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:103
msgid "Connection to Repetier works correctly."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:109
msgid "Could not connect to Repetier"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:111
msgid "Note: Repetier version at least 0.90.0 is required."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:263
#, boost-format
msgid ""
"HTTP status: %1%\n"
"Message body: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:270
#, boost-format
msgid ""
"Parsing of host response failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:283
#, boost-format
msgid ""
"Enumeration of host printers failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:584
msgid "Taking a configuration snapshot failed."
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:598
msgid ""
"PrusaSlicer has encountered an error while taking a configuration snapshot."
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:599
msgid "PrusaSlicer error"
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Continue"
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Abort"
msgstr ""

#: src/libslic3r/GCode.cpp:598
msgid "There is an object with no extrusions in the first layer."
msgstr ""

#: src/libslic3r/GCode.cpp:629
#, boost-format
msgid "Empty layer between %1% and %2%."
msgstr ""

#: src/libslic3r/GCode.cpp:632
msgid "(Some lines not shown)"
msgstr ""

#: src/libslic3r/GCode.cpp:634
#, boost-format
msgid "Object name: %1%"
msgstr ""

#: src/libslic3r/GCode.cpp:635
msgid ""
"Make sure the object is printable. This is usually caused by negligibly "
"small extrusions or by a faulty model. Try to repair the model or change its "
"orientation on the bed."
msgstr ""

#: src/libslic3r/GCode.cpp:777
msgid "Filament Start G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:784
msgid "Filament End G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:825
msgid "In the custom G-code were found reserved keywords:"
msgstr ""

#: src/libslic3r/GCode.cpp:827
msgid ""
"This may cause problems in g-code visualization and printing time estimation."
msgstr ""

#: src/libslic3r/GCode.cpp:1222 src/libslic3r/GCode.cpp:1233
msgid "No extrusions were generated for objects."
msgstr ""

#: src/libslic3r/GCode.cpp:1425
msgid ""
"Your print is very close to the priming regions. Make sure there is no "
"collision."
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:38 src/libslic3r/ExtrusionRole.cpp:59
msgid "Perimeter"
msgstr "Kehä"

#: src/libslic3r/ExtrusionRole.cpp:39 src/libslic3r/ExtrusionRole.cpp:61
msgid "External perimeter"
msgstr "Ulkoinen kehä"

#: src/libslic3r/ExtrusionRole.cpp:40 src/libslic3r/ExtrusionRole.cpp:63
msgid "Overhang perimeter"
msgstr "Ulokekehä"

#: src/libslic3r/ExtrusionRole.cpp:41 src/libslic3r/ExtrusionRole.cpp:65
msgid "Internal infill"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:42 src/libslic3r/ExtrusionRole.cpp:67
#: src/libslic3r/PrintConfig.cpp:1452 src/libslic3r/PrintConfig.cpp:2432
#: src/libslic3r/PrintConfig.cpp:2444
msgid "Solid infill"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:43 src/libslic3r/ExtrusionRole.cpp:69
#: src/libslic3r/PrintConfig.cpp:1461 src/libslic3r/PrintConfig.cpp:3033
#: src/libslic3r/PrintConfig.cpp:3046
msgid "Top solid infill"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:45 src/libslic3r/ExtrusionRole.cpp:73
msgid "Bridge infill"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:46 src/libslic3r/ExtrusionRole.cpp:75
#: src/libslic3r/PrintConfig.cpp:1380
msgid "Gap fill"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:47 src/libslic3r/ExtrusionRole.cpp:77
msgid "Skirt/Brim"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:49 src/libslic3r/ExtrusionRole.cpp:81
#: src/libslic3r/PrintConfig.cpp:2781
msgid "Support material interface"
msgstr ""

#: src/libslic3r/Flow.cpp:58
#, boost-format
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1878
#, boost-format
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1889
msgid ""
"The selected 3MF contains FDM supports painted object using a newer version "
"of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1893
msgid ""
"The selected 3MF contains seam painted object using a newer version of "
"PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1897
msgid ""
"The selected 3MF contains multi-material painted object using a newer "
"version of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/AMF.cpp:996
#, boost-format
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/GCode/PostProcessor.cpp:284
#, boost-format
msgid ""
"Post-processing script %1% failed.\n"
"\n"
"The post-processing script is expected to change the G-code file %2% in "
"place, but the G-code file was deleted and likely saved under a new name.\n"
"Please adjust the post-processing script to change the G-code in place and "
"consult the manual on how to optionally rename the post-processed G-code "
"file.\n"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:87
msgid "undefined error"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:89
msgid "too many files"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:91
msgid "file too large"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:93
msgid "unsupported method"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:95
msgid "unsupported encryption"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported feature"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:99
msgid "failed finding central directory"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:101
msgid "not a ZIP archive"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:103
msgid "invalid header or archive is corrupted"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:105
msgid "unsupported multidisk archive"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:107
msgid "decompression failed or archive is corrupted"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:109
msgid "compression failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:111
msgid "unexpected decompressed size"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:113
msgid "CRC-32 check failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:115
msgid "unsupported central directory size"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:117
msgid "allocation failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:119
msgid "file open failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:121
msgid "file create failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:123
msgid "file write failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:125
msgid "file read failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:127
msgid "file close failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:129
msgid "file seek failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:131
msgid "file stat failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:133
msgid "invalid parameter"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:135
msgid "invalid filename"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:137
msgid "buffer too small"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:139
msgid "internal error"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:141
msgid "file not found"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:143
msgid "archive is too large"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:145
msgid "validation failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:147
msgid "write calledback failed"
msgstr ""

#: src/libslic3r/Print.cpp:466
msgid "All objects are outside of the print volume."
msgstr ""

#: src/libslic3r/Print.cpp:469
msgid "The supplied settings will cause an empty print."
msgstr ""

#: src/libslic3r/Print.cpp:473
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""

#: src/libslic3r/Print.cpp:475
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""

#: src/libslic3r/Print.cpp:481
msgid ""
"Avoid crossing perimeters option and avoid crossing curled overhangs option "
"cannot be both enabled together."
msgstr ""
"Vältä kehien ylitys-valinta ja vältä kiharien ulokkeiden ylitys-valinta "
"eivät voi molemmat olla valittuna yhdessä."

#: src/libslic3r/Print.cpp:490
msgid ""
"Only a single object may be printed at a time in Spiral Vase mode. Either "
"remove all but the last object, or enable sequential mode by "
"\"complete_objects\"."
msgstr ""

#: src/libslic3r/Print.cpp:494
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""

#: src/libslic3r/Print.cpp:498
msgid ""
"Machine limits cannot be emitted to G-Code when Klipper firmware flavor is "
"used. Change the value of machine_limits_usage."
msgstr ""

#: src/libslic3r/Print.cpp:525
#, boost-format
msgid "The object %1% exceeds the maximum build volume height."
msgstr ""

#: src/libslic3r/Print.cpp:526
#, boost-format
msgid ""
"While the object %1% itself fits the build volume, its last layer exceeds "
"the maximum build volume height."
msgstr ""

#: src/libslic3r/Print.cpp:527
msgid ""
"You might want to reduce the size of your model or change current print "
"settings and retry."
msgstr ""

#: src/libslic3r/Print.cpp:543
msgid "Variable layer height is not supported with Organic supports."
msgstr ""

#: src/libslic3r/Print.cpp:556
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:563
msgid ""
"The Wipe Tower is currently only supported for the Marlin, Klipper, RepRap/"
"Sprinter, RepRapFirmware and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:565
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""

#: src/libslic3r/Print.cpp:567
msgid ""
"Ooze prevention is only supported with the wipe tower when "
"'single_extruder_multi_material' is off."
msgstr ""

#: src/libslic3r/Print.cpp:569
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""

#: src/libslic3r/Print.cpp:571
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""

#: src/libslic3r/Print.cpp:581
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""

#: src/libslic3r/Print.cpp:583
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""

#: src/libslic3r/Print.cpp:586
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""

#: src/libslic3r/Print.cpp:588
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""

#: src/libslic3r/Print.cpp:613
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""

#: src/libslic3r/Print.cpp:637
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""

#: src/libslic3r/Print.cpp:650
#, boost-format
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:653
#, boost-format
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:664
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:672
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""

#: src/libslic3r/Print.cpp:712
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:717
msgid "Layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:738
msgid ""
"Relative extruder addressing requires resetting the extruder position at "
"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
"layer_gcode."
msgstr ""

#: src/libslic3r/Print.cpp:740
msgid ""
"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
"absolute extruder addressing."
msgstr ""

#: src/libslic3r/Print.cpp:742
msgid ""
"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
"extruder addressing."
msgstr ""

#: src/libslic3r/Print.cpp:911
msgid "Generating skirt and brim"
msgstr ""

#: src/libslic3r/Print.cpp:959
msgid "Exporting G-code"
msgstr ""

#: src/libslic3r/Print.cpp:963
msgid "Generating G-code"
msgstr ""

#: src/libslic3r/Print.cpp:1183
msgid "Alert if supports needed"
msgstr ""

#. TRN Alert when support is needed. Describes that the model has long bridging extrusions which may print badly
#: src/libslic3r/Print.cpp:1189
msgid "Long bridging extrusions"
msgstr ""

#. TRN Alert when support is needed. Describes bridge anchors/turns in the air, which will definitely print badly
#: src/libslic3r/Print.cpp:1191
msgid "Floating bridge anchors"
msgstr ""

#. TRN Alert when support is needed. Describes that the print has large overhang area which will print badly or not print at all.
#: src/libslic3r/Print.cpp:1195
msgid "Collapsing overhang"
msgstr ""

#. TRN Alert when support is needed. Describes extrusions that are not supported enough and come out curled or loose.
#: src/libslic3r/Print.cpp:1198
msgid "Loose extrusions"
msgstr ""

#. TRN Alert when support is needed. Describes that the print has low bed adhesion and may became loose.
#: src/libslic3r/Print.cpp:1202
msgid "Low bed adhesion"
msgstr ""

#. TRN Alert when support is needed. Describes that the object has part that is not connected to the bed and will not print at all without supports.
#: src/libslic3r/Print.cpp:1204
msgid "Floating object part"
msgstr ""

#. TRN Alert when support is needed. Describes that the object has thin part that may brake during printing
#: src/libslic3r/Print.cpp:1206
msgid "Thin fragile part"
msgstr ""

#. TRN this translation rule is used to translate lists of uknown size on single line. The first argument is element of the list,
#. the second argument may be element or rest of the list. For most languages, this does not need translation, but some use different
#. separator than comma and some use blank space in front of the separator.
#: src/libslic3r/Print.cpp:1215
#, boost-format
msgid "%1%, %2%"
msgstr ""

#: src/libslic3r/Print.cpp:1314
msgid "Consider enabling supports."
msgstr ""

#: src/libslic3r/Print.cpp:1316
msgid "Also consider enabling brim."
msgstr ""

#. TRN Alert message for detected print issues. first argument is a list of detected issues.
#: src/libslic3r/Print.cpp:1320
#, boost-format
msgid ""
"Detected print stability issues:\n"
"%1%"
msgstr ""

#: src/libslic3r/SLA/Pad.cpp:530
msgid "Pad brim size is too small for the current configuration."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:547
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:559
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:565
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:580
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:587
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:597
#, c-format, boost-format
msgid "Unknown archive format: %s"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:703
msgid "Slicing done"
msgstr ""

#. TRN Status of the SLA print calculation
#: src/libslic3r/SLAPrintSteps.cpp:55
msgid "Assembling model from parts"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:56
msgid "Hollowing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:57
msgid "Drilling holes into model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:58
msgid "Slicing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:59 src/libslic3r/SLAPrintSteps.cpp:692
msgid "Generating support points"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:60
msgid "Generating support tree"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:61
msgid "Generating pad"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:62
msgid "Slicing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:77
msgid "Merging slices and calculating statistics"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:78
msgid "Rasterizing layers"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:259
msgid ""
"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:266
msgid "Unable to drill the current configuration of holes into the model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:275
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:283
msgid "Failed to drill some holes into the model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:293
msgid ""
"Some parts of the print will be previewed with approximated meshes. This "
"does not affect the quality of slices or the physical print in any way."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:741 src/libslic3r/SLAPrintSteps.cpp:750
#: src/libslic3r/SLAPrintSteps.cpp:788
msgid "Visualizing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:780
msgid "No pad can be generated for this model with the current configuration"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:909
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""

#: src/libslic3r/PrintBase.cpp:80
msgid "Failed processing of the output_filename_format template."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:251 src/libslic3r/PrintConfig.cpp:252
msgid "Printer technology"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:257
msgid "Bed shape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:262
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:267
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:272
msgid "Elephant foot compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:274
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:282
msgid "G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:283
msgid ""
"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
"following format: \"XxY, XxY, ...\""
msgstr ""

#: src/libslic3r/PrintConfig.cpp:289
msgid "Format of G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:290
msgid ""
"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
"QOI for low memory firmware"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:298
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:306
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:314
msgid "Hostname, IP or URL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:315
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:324
msgid "API Key / Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:325
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:333
msgid "Name of the printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:341
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:357
msgid "Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:365
msgid "Ignore HTTPS certificate revocation checks"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:366
msgid ""
"Ignore HTTPS certificate revocation checks in case of missing or offline "
"distribution points. One may want to enable this option for self signed "
"certificates if connection fails."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:373
msgid "Printer preset names"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:374
msgid "Names of presets related to the physical printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:379
msgid "Authorization Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:382
msgid "API key"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:383
msgid "HTTP digest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:403
msgid "Avoid crossing curled overhangs (Experimental)"
msgstr ""

#. TRN PrintSettings: "Avoid crossing curled overhangs (Experimental)"
#: src/libslic3r/PrintConfig.cpp:405
msgid ""
"Plan travel moves such that the extruder avoids areas where the filament may "
"be curled up. This is mostly happening on steeper rounded overhangs and may "
"cause a crash with the nozzle. This feature slows down both the print and "
"the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:412
msgid "Avoid crossing perimeters"
msgstr "Vältä kehien ylitys"

#: src/libslic3r/PrintConfig.cpp:413
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"Optimoi siirtymät minimisoidakseen kehien ylitykset. Tämä on pääasiassa "
"hyödyllistä Bowden-ekstruudereilla jotka kärsii tihkumisesta. Tämä "
"ominaisuus hidastaa tulostusta sekä G-koodin generointia."

#: src/libslic3r/PrintConfig.cpp:420
msgid "Avoid crossing perimeters - Max detour length"
msgstr "Vältä kehien ylitys - Maksimi kierron pituus"

#: src/libslic3r/PrintConfig.cpp:422
msgid ""
"The maximum detour length for avoid crossing perimeters. If the detour is "
"longer than this value, avoid crossing perimeters is not applied for this "
"travel path. Detour length could be specified either as an absolute value or "
"as percentage (for example 50%) of a direct travel path."
msgstr ""
"Suurin sallittu kierron pituus kehien ylitysten välttämiseksi. Jos kierron "
"pituus on pidempi kuin tämä arvo, ominaisuutta ei käytetä tälle reitille. "
"Kierron pituus voidaan määritellä absoluutisena arvona, tai prosenttilukuna "
"(esim. 50%) suoraa matkaa."

#: src/libslic3r/PrintConfig.cpp:425
msgid "mm or % (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:432 src/libslic3r/PrintConfig.cpp:2983
msgid "Other layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:433
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:436
msgid "Bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:443
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:453
msgid "Between objects G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:454
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""

#. TRN Print Settings: "Bottom solid layers"
#: src/libslic3r/PrintConfig.cpp:463 src/libslic3r/PrintConfig.cpp:471
msgctxt "Layers"
msgid "Bottom"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:465
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:466
msgid "Bottom solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:473
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:475
msgid "Minimum bottom shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:481
msgid "Bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:482
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:484 src/libslic3r/PrintConfig.cpp:740
#: src/libslic3r/PrintConfig.cpp:1250 src/libslic3r/PrintConfig.cpp:1259
#: src/libslic3r/PrintConfig.cpp:1446 src/libslic3r/PrintConfig.cpp:1455
#: src/libslic3r/PrintConfig.cpp:1464 src/libslic3r/PrintConfig.cpp:1473
#: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1806
#: src/libslic3r/PrintConfig.cpp:1818 src/libslic3r/PrintConfig.cpp:1828
#: src/libslic3r/PrintConfig.cpp:2021 src/libslic3r/PrintConfig.cpp:2029
msgid "mm/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:490
msgid "Bridging angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:492
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:501
msgid "Bridges fan speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:502
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:503 src/libslic3r/PrintConfig.cpp:594
#: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:612
#: src/libslic3r/PrintConfig.cpp:621 src/libslic3r/PrintConfig.cpp:1200
#: src/libslic3r/PrintConfig.cpp:1647 src/libslic3r/PrintConfig.cpp:1836
#: src/libslic3r/PrintConfig.cpp:1899 src/libslic3r/PrintConfig.cpp:2153
#: src/libslic3r/PrintConfig.cpp:2212 src/libslic3r/PrintConfig.cpp:2976
#: src/libslic3r/PrintConfig.cpp:3209 src/libslic3r/PrintConfig.cpp:3443
#: src/libslic3r/PrintConfig.cpp:3669 src/libslic3r/PrintConfig.cpp:3948
msgid "%"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:510
msgid "Bridge flow ratio"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:512
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:522
msgid "Bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:524
msgid "Speed for printing bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:525 src/libslic3r/PrintConfig.cpp:1007
#: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1024
#: src/libslic3r/PrintConfig.cpp:1032 src/libslic3r/PrintConfig.cpp:1059
#: src/libslic3r/PrintConfig.cpp:1078 src/libslic3r/PrintConfig.cpp:1384
#: src/libslic3r/PrintConfig.cpp:1586 src/libslic3r/PrintConfig.cpp:1666
#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:1774
#: src/libslic3r/PrintConfig.cpp:1786 src/libslic3r/PrintConfig.cpp:1796
#: src/libslic3r/PrintConfig.cpp:1858 src/libslic3r/PrintConfig.cpp:1917
#: src/libslic3r/PrintConfig.cpp:2060 src/libslic3r/PrintConfig.cpp:2287
#: src/libslic3r/PrintConfig.cpp:2296 src/libslic3r/PrintConfig.cpp:2830
#: src/libslic3r/PrintConfig.cpp:3082 src/libslic3r/PrintConfig.cpp:3092
msgid "mm/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:532
msgid "Enable dynamic overhang speeds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:534
msgid "This setting enables dynamic speed control on overhangs."
msgstr ""

#. TRN PrintSettings : "Dynamic overhang speed"
#: src/libslic3r/PrintConfig.cpp:539
msgid ""
"Overhang size is expressed as a percentage of overlap of the extrusion with "
"the previous layer: 100% would be full overlap (no overhang), while 0% "
"represents full overhang (floating extrusion, bridge). Speeds for overhang "
"sizes in between are calculated via linear interpolation. If set as "
"percentage, the speed is calculated over the external perimeter speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:545 src/libslic3r/PrintConfig.cpp:592
msgid "speed for 0% overlap (bridge)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:557
#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:575
#: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:1303
#: src/libslic3r/PrintConfig.cpp:1314 src/libslic3r/PrintConfig.cpp:2396
#: src/libslic3r/PrintConfig.cpp:2449 src/libslic3r/PrintConfig.cpp:2785
#: src/libslic3r/PrintConfig.cpp:3053
msgid "mm/s or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:554 src/libslic3r/PrintConfig.cpp:601
msgid "speed for 25% overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:563 src/libslic3r/PrintConfig.cpp:610
msgid "speed for 50% overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:572 src/libslic3r/PrintConfig.cpp:619
msgid "speed for 75% overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:581
msgid "Enable dynamic fan speeds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:582
msgid "This setting enables dynamic fan speed control on overhangs."
msgstr ""

#. TRN FilamentSettings : "Dynamic fan speeds"
#: src/libslic3r/PrintConfig.cpp:587
msgid ""
"Overhang size is expressed as a percentage of overlap of the extrusion with "
"the previous layer: 100% would be full overlap (no overhang), while 0% "
"represents full overhang (floating extrusion, bridge). Fan speeds for "
"overhang sizes in between are calculated via linear interpolation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:628
msgid "Brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:630
msgid ""
"The horizontal width of the brim that will be printed around each object on "
"the first layer. When raft is used, no brim is generated (use "
"raft_first_layer_expansion)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:639
msgid "Brim type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:641
msgid ""
"The places where the brim will be printed around each object on the first "
"layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:643
msgid "No brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:644
msgid "Outer brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:645
msgid "Inner brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:646
msgid "Outer and inner brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:652
msgid "Brim separation gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:654
msgid ""
"Offset of brim from the printed object. The offset is applied after the "
"elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:661
msgid "Colorprint height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:662
msgid "Heights at which a filament change is to occur."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:672
msgid "Compatible printers condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:673
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:687
msgid "Compatible print profiles condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:688
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:705
msgid "Complete individual objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:706
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:714
msgid "Enable auto cooling"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:715
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:720
msgid "Cooling tube position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:721
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:728
msgid "Cooling tube length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:729
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:737
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:746
msgid "Default filament profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:747
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:753
msgid "Default print profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:754 src/libslic3r/PrintConfig.cpp:3895
#: src/libslic3r/PrintConfig.cpp:3906
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:760
msgid "Disable fan for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:761
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:770
msgid "Don't support bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:772
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:778
msgid "Distance between copies"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:779
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:787
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:797
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:808
msgid "Top fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:810
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:1226
#: src/libslic3r/PrintConfig.cpp:2796 src/libslic3r/PrintConfig.cpp:2811
msgid "Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:814
msgid "Monotonic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:815
msgid "Monotonic Lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:1227
msgid "Aligned Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:817 src/libslic3r/PrintConfig.cpp:1233
#: src/libslic3r/PrintConfig.cpp:2812
msgid "Concentric"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:818 src/libslic3r/PrintConfig.cpp:1237
msgid "Hilbert Curve"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:1238
msgid "Archimedean Chords"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:820 src/libslic3r/PrintConfig.cpp:1239
msgid "Octagram Spiral"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:828
msgid "Bottom fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:830
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:837 src/libslic3r/PrintConfig.cpp:849
#: src/libslic3r/PrintConfig.cpp:2026
msgid "External perimeters"
msgstr "Ulkoiset kehät"

#: src/libslic3r/PrintConfig.cpp:839
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:842 src/libslic3r/PrintConfig.cpp:956
#: src/libslic3r/PrintConfig.cpp:1281 src/libslic3r/PrintConfig.cpp:1498
#: src/libslic3r/PrintConfig.cpp:1550 src/libslic3r/PrintConfig.cpp:1577
#: src/libslic3r/PrintConfig.cpp:2049 src/libslic3r/PrintConfig.cpp:2437
#: src/libslic3r/PrintConfig.cpp:2621 src/libslic3r/PrintConfig.cpp:2706
#: src/libslic3r/PrintConfig.cpp:3039 src/libslic3r/PrintConfig.cpp:3278
#: src/libslic3r/PrintConfig.cpp:3293 src/libslic3r/PrintConfig.cpp:3327
#: src/libslic3r/PrintConfig.cpp:3339
msgid "mm or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:851
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:861
msgid "External perimeters first"
msgstr "Ulkoiset kehät ensin"

#: src/libslic3r/PrintConfig.cpp:863
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""
"Tulostaa kehät uloimmasta sisään, oletusarvoisen käänteisen järjestyksen "
"sijaan."

#: src/libslic3r/PrintConfig.cpp:869
msgid "Extra perimeters if needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:871
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:878
msgid "Extra perimeters on overhangs (Experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:880
msgid ""
"Detect overhang areas where bridges cannot be anchored, and fill them with "
"extra perimeter paths. These paths are anchored to the nearby non-overhang "
"area when possible."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:888
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:896
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:907
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:917
msgid "Extruder Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:918 src/libslic3r/PrintConfig.cpp:981
#: src/libslic3r/PrintConfig.cpp:3740
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:924
msgid "Extruder offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:925
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:934
msgid "Extrusion axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:935
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:940
msgid "Extrusion multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:941
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:950
msgid "Default extrusion width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:952
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:964
msgid "Keep fan always on"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:965
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:970
msgid "Enable fan if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:971
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:973 src/libslic3r/PrintConfig.cpp:2384
msgid "approximate seconds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:980 src/libslic3r/PrintConfig.cpp:3739
msgid "Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:986
msgid "Filament notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:987
msgid "You can put your notes regarding the filament here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:995 src/libslic3r/PrintConfig.cpp:1864
msgid "Max volumetric speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:996
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1005
msgid "Loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1006
msgid "Speed used for loading the filament on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1013
msgid "Loading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1014
msgid "Speed used at the very beginning of loading phase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1021
msgid "Unloading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1022
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1030
msgid "Unloading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1031
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1038
msgid "Delay after unloading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1039
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1048
msgid "Number of cooling moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1049
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1057
msgid "Speed of the first cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1058
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1065
msgid "Minimal purge on wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1066
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1070
msgid "mm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1076
msgid "Speed of the last cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1077
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1084
msgid "Filament load time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1085
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1092
msgid "Ramming parameters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1093
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1099
msgid "Filament unload time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1100
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1108
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1115 src/libslic3r/PrintConfig.cpp:3783
#: src/libslic3r/PrintConfig.cpp:3784
msgid "Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1116
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1119
msgid "g/cm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1124
msgid "Filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1125
msgid "The filament material type for use in custom G-codes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1153
msgid "Soluble material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1154
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1160
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1161
msgid "money/kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1166
msgid "Spool weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1167
msgid ""
"Enter weight of the empty filament spool. One may weigh a partially consumed "
"filament spool before printing and one may compare the measured weight with "
"the calculated weight of the filament with the spool to find out whether the "
"amount of filament on the spool is sufficient to finish the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1180 src/libslic3r/PrintConfig.cpp:3890
msgid "(Unknown)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1184
msgid "Fill angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1186
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1197
msgid "Fill density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1199
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1222
msgid "Fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1224
msgid "Fill pattern for general low-density infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1228 src/libslic3r/PrintConfig.cpp:2842
msgid "Grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1230
msgid "Stars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1231
msgid "Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1232
msgid "Line"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1234 src/libslic3r/PrintConfig.cpp:2798
msgid "Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1235
msgid "3D Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1236
msgid "Gyroid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1240
msgid "Adaptive Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1241
msgid "Support Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1242
msgid "Lightning"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1248
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1256
msgid "First object layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1257
msgid ""
"This is the acceleration your printer will use for first layer of object "
"above raft interface. Set zero to disable acceleration control for first "
"layer of object above raft interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1266
msgid "First layer bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1267
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1277
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1291
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1299
msgid "First layer speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1300
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1310
msgid "Speed of object first layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1311
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first object layer above raft interface, regardless "
"of their type. If expressed as a percentage (for example: 40%) it will scale "
"the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1321
msgid "First layer nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1322
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1330
msgid "Full fan speed at layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1331
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than "
"\"disable_fan_first_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1343
msgid "Fuzzy skin type."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1346
msgid "Outside walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1347
msgid "All walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1353
msgid "Fuzzy skin thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1355
msgid ""
"The maximum distance that each skin point can be offset (both ways), "
"measured perpendicular to the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1363
msgid "Fuzzy skin point distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1365
msgid ""
"Perimeters will be split into multiple segments by inserting Fuzzy skin "
"points. Lowering the Fuzzy skin point distance will increase the number of "
"randomly offset points on the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1373
msgid "Fill gaps"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1375
msgid ""
"Enables filling of gaps between perimeters and between the inner most "
"perimeters and infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1382
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1390
msgid "Verbose G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1391
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1398
msgid "G-code flavor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1399
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1415
msgid "No extrusion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1421
msgid "Label objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1422
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1429
msgid "G-code substitutions"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1430
msgid "Find / replace patterns in G-code lines and substitute them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1435
msgid "High extruder current on filament swap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1436
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1444
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1453
msgid ""
"This is the acceleration your printer will use for solid infill. Set zero to "
"use the value for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1462
msgid ""
"This is the acceleration your printer will use for top solid infill. Set "
"zero to use the value for solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1471
msgid ""
"This is the acceleration your printer will use for travel moves. Set zero to "
"disable acceleration control for travel."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1479
msgid "Combine infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1481
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1484
msgid "Combine infill every n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1490
msgid "Length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1492
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than infill_anchor_max is found, the infill line is "
"connected to a perimeter segment at just one side and the length of the "
"perimeter segment taken is limited to this parameter, but no longer than "
"anchor_length_max. Set this parameter to zero to disable anchoring "
"perimeters connected to a single infill line."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1502
msgid "0 (no open anchors)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1503 src/libslic3r/PrintConfig.cpp:1526
msgid "1 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1504 src/libslic3r/PrintConfig.cpp:1527
msgid "2 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1505 src/libslic3r/PrintConfig.cpp:1528
msgid "5 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1506 src/libslic3r/PrintConfig.cpp:1529
msgid "10 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1507 src/libslic3r/PrintConfig.cpp:1530
msgid "1000 (unlimited)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1513
msgid "Maximum length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1515
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than this parameter is found, the infill line is connected "
"to a perimeter segment at just one side and the length of the perimeter "
"segment taken is limited to infill_anchor, but no longer than this "
"parameter. Set this parameter to zero to disable anchoring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1525
msgid "0 (not anchored)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1536
msgid "Infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1538
msgid "The extruder to use when printing infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1546
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1557
msgid "Infill before perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1558
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1572
msgid "Infill/perimeters overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1574
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1585
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1593
msgid "Inherits profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1594
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1607
msgid "Interface shells"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1608
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1616
msgid "Maximum width of a segmented region"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1617
msgid "Maximum width of a segmented region. Zero disables this feature."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1618 src/libslic3r/PrintConfig.cpp:2227
#: src/libslic3r/PrintConfig.cpp:2236
msgid "mm (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1625
msgid "Enable ironing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1626
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1632 src/libslic3r/PrintConfig.cpp:1634
msgid "Ironing Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1636
msgid "All top surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1637
msgid "Topmost surface only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1638
msgid "All solid surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1644
msgid "Flow rate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1646
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1654
msgid "Spacing between ironing passes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1656
msgid "Distance between ironing lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1673
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1684
msgid "Supports remaining times"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1685
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1693
msgid "Supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1694
msgid "The firmware supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1699
msgid "How to apply limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1700
msgid "Purpose of Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1702
msgid "How to apply the Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1704
msgid "Emit to G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1705
msgid "Use for time estimate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1706
msgid "Ignore"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1730
msgid "Maximum feedrate X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1731
msgid "Maximum feedrate Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1732
msgid "Maximum feedrate Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1733
msgid "Maximum feedrate E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1736
msgid "Maximum feedrate of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1737
msgid "Maximum feedrate of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1738
msgid "Maximum feedrate of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1739
msgid "Maximum feedrate of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1747
msgid "Maximum acceleration X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1748
msgid "Maximum acceleration Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1749
msgid "Maximum acceleration Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1750
msgid "Maximum acceleration E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1753
msgid "Maximum acceleration of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1754
msgid "Maximum acceleration of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1755
msgid "Maximum acceleration of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1756
msgid "Maximum acceleration of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1764
msgid "Maximum jerk X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1765
msgid "Maximum jerk Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1766
msgid "Maximum jerk Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1767
msgid "Maximum jerk E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1770
msgid "Maximum jerk of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1771
msgid "Maximum jerk of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1772
msgid "Maximum jerk of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1773
msgid "Maximum jerk of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1783
msgid "Minimum feedrate when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1785
msgid "Minimum feedrate when extruding (M205 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1793
msgid "Minimum travel feedrate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1795
msgid "Minimum travel feedrate (M205 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1803 src/libslic3r/PrintConfig.cpp:1805
msgid "Maximum acceleration when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1814
msgid "Maximum acceleration when retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1816
msgid ""
"Maximum acceleration when retracting.\n"
"\n"
"Not used for RepRapFirmware, which does not support it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1825
msgid "Maximum acceleration for travel moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1827
msgid "Maximum acceleration for travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1834 src/libslic3r/PrintConfig.cpp:1843
msgid "Max"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1835
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1844
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1854
msgid "Max print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1855
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1865
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1873
msgid "Max volumetric slope positive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1874
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from lower speed to higher speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s "
"(feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1879 src/libslic3r/PrintConfig.cpp:1891
msgid "mm³/s²"
msgstr "mm³/s²"

#: src/libslic3r/PrintConfig.cpp:1885
msgid "Max volumetric slope negative"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1886
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from higher speed to lower speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 5.4 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s "
"(feedrate 20 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1897 src/libslic3r/PrintConfig.cpp:1906
msgid "Min"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1898
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1907
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1915
msgid "Min print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1916
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1923
msgid "Minimal filament extrusion length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1924
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1933
msgid "Configuration notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1934
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1944
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1949
msgid "Host Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1950
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1968
msgid "Only retract when crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1969
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#. TRN PrintSettings: Enable ooze prevention
#: src/libslic3r/PrintConfig.cpp:1977
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1982
msgid "Output filename format"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1983
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1992
msgid "Detect bridging perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1994
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2000
msgid "Filament parking position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2001
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2009
msgid "Extra loading distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2010
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2018 src/libslic3r/PrintConfig.cpp:2043
#: src/libslic3r/PrintConfig.cpp:2057 src/libslic3r/PrintConfig.cpp:2067
msgid "Perimeters"
msgstr "Kehät"

#: src/libslic3r/PrintConfig.cpp:2019
msgid ""
"This is the acceleration your printer will use for perimeters. Set zero to "
"disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2027
msgid ""
"This is the acceleration your printer will use for external perimeters. Set "
"zero to use the value for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2034
msgid "Perimeter extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2036
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2045
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2059
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2069
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2073
msgid "(minimum)"
msgstr "(minimi)"

#: src/libslic3r/PrintConfig.cpp:2081
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2093
msgid "Printer type"
msgstr "Tulostimen tyyppi"

#: src/libslic3r/PrintConfig.cpp:2094
msgid "Type of the printer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2099
msgid "Printer notes"
msgstr "Tulostimen muistiinpanot"

#: src/libslic3r/PrintConfig.cpp:2100
msgid "You can put your notes regarding the printer here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2108
msgid "Printer vendor"
msgstr "Tulostimen valmistaja"

#: src/libslic3r/PrintConfig.cpp:2109
msgid "Name of the printer vendor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2114
msgid "Printer variant"
msgstr "Tulostimen malli"

#: src/libslic3r/PrintConfig.cpp:2115
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2132
msgid "Raft contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2134
msgid ""
"The vertical distance between object and raft. Ignored for soluble interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2141
msgid "Raft expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2143
msgid "Expansion of the raft in XY plane for better stability."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2150
msgid "First layer density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2152
msgid "Density of the first raft or support layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2160
msgid "First layer expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2162
msgid ""
"Expansion of the first raft or support layer to improve adhesion to print "
"bed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2169
msgid "Raft layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2171
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2179
msgid "Slice resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2180
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2190
msgid "G-code resolution"
msgstr "G-koodin resoluutio"

#: src/libslic3r/PrintConfig.cpp:2191
msgid ""
"Maximum deviation of exported G-code paths from their full resolution "
"counterparts. Very high resolution G-code requires huge amount of RAM to "
"slice and preview, also a 3D printer may stutter not being able to process a "
"high resolution G-code in a timely manner. On the other hand, a low "
"resolution G-code will produce a low poly effect and because the G-code "
"reduction is performed at each layer independently, visible artifacts may be "
"produced."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2202
msgid "Minimum travel after retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2203
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2209
msgid "Retract amount before wipe"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2210
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2217
msgid "Retract on layer change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2218
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2224
msgid "Retraction Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2225
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2232
msgid "Retraction Length (Toolchange)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2233
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2241
msgid "Lift Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2242
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2249
msgid "Above Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2250
msgid "Only lift Z above"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2251
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2258
msgid "Below Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2259
msgid "Only lift Z below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2260
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2268 src/libslic3r/PrintConfig.cpp:2276
msgid "Extra length on restart"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2269
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2277
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2284 src/libslic3r/PrintConfig.cpp:2285
msgid "Retraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2286
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2292 src/libslic3r/PrintConfig.cpp:2293
msgid "Deretraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2294
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2301
msgid "Seam position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2303
msgid "Position of perimeters starting points."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2306
msgid "Nearest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2307
msgid "Aligned"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2314
msgid "Staggered inner seams"
msgstr ""

#. TRN PrintSettings: "Staggered inner seams"
#: src/libslic3r/PrintConfig.cpp:2316
msgid ""
"This option causes the inner seams to be shifted backwards based on their "
"depth, forming a zigzag pattern."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2323
msgid "Direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2325
msgid "Preferred direction of the seam"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2326
msgid "Seam preferred direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2333
msgid "Jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2335
msgid "Seam preferred direction jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2336
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2343
msgid "Distance from brim/object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2344
msgid ""
"Distance between skirt and brim (when draft shield is not used) or objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2350
msgid "Skirt height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2351
msgid "Height of skirt expressed in layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2357
msgid "Draft shield"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2358
msgid ""
"With draft shield active, the skirt will be printed skirt_distance from the "
"object, possibly intersecting brim.\n"
"Enabled = skirt is as tall as the highest printed object.\n"
"Limited = skirt is as tall as specified by skirt_height.\n"
"This is useful to protect an ABS or ASA print from warping and detaching "
"from print bed due to wind draft."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2363
msgid "Disabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2364
msgid "Limited"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2365
msgid "Enabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2371
msgid "Loops (minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2372
msgid "Skirt Loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2373
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2381
msgid "Slow down if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2382
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2391
msgid "Small perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2393
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2403
msgid "Solid infill threshold area"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2405
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2406
msgid "mm²"
msgstr "mm²"

#: src/libslic3r/PrintConfig.cpp:2412
msgid "Solid infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2414
msgid "The extruder to use when printing solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2420
msgid "Solid infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2422
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2434
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2446
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2458
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2464 src/libslic3r/PrintConfig.cpp:2465
msgid "Minimum thickness of a top / bottom shell"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2471
msgid "Spiral vase"
msgstr "Spiraalimaljakko"

#: src/libslic3r/PrintConfig.cpp:2472
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than one single object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2480
msgid "Temperature variation"
msgstr ""

#. TRN PrintSettings : "Ooze prevention" > "Temperature variation"
#: src/libslic3r/PrintConfig.cpp:2482
msgid ""
"Temperature difference to be applied when an extruder is not active. The "
"value is not used when 'idle_temperature' in filament settings is defined."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2492
msgid "Emit temperature commands automatically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2493
msgid ""
"When enabled, PrusaSlicer will check whether your Custom Start G-Code "
"contains M104 or M190. If so, the temperatures will not be emitted "
"automatically so you're free to customize the order of heating commands and "
"other custom actions. Note that you can use placeholder variables for all "
"PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" "
"command wherever you want.\n"
"If your Custom Start G-Code does NOT contain M104 or M190, PrusaSlicer will "
"execute the Start G-Code after bed reached its target temperature and "
"extruder just started heating.\n"
"\n"
"When disabled, PrusaSlicer will NOT emit commands to heat up extruder and "
"bed, leaving both to Custom Start G-Code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2508
msgid ""
"This start procedure is inserted at the beginning, possibly prepended by "
"temperature-changing commands. See 'autoemit_temperature_commands'."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2518
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2534
msgid "Color change G-code"
msgstr "Värinvaihdon G-koodi"

#: src/libslic3r/PrintConfig.cpp:2535
msgid "This G-code will be used as a code for the color change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2544
msgid "This G-code will be used as a code for the pause print"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2553
msgid "This G-code will be used as a custom code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2561
msgid "Single Extruder Multi Material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2562
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2567
msgid "Prime all printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2568
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2573
msgid "No sparse layers (EXPERIMENTAL)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2574
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2581
msgid "Slice gap closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2583
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2591
msgid "Slicing Mode"
msgstr "Viipalointitila"

#: src/libslic3r/PrintConfig.cpp:2593
msgid ""
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
"close all holes in the model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2595
msgid "Regular"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2596
msgid "Even-odd"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2597
msgid "Close holes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2603
msgid "Generate support material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2605
msgid "Enable support material generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2609
msgid "Auto generated supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2611
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2617
msgid "XY separation between an object and its support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2619
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2630
msgid "Pattern angle"
msgstr "Kuvion kulma"

#: src/libslic3r/PrintConfig.cpp:2632
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2642 src/libslic3r/PrintConfig.cpp:3485
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2647
msgid "Top contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2649
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2655
msgid "0 (soluble)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2656
msgid "0.1 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2657
msgid "0.2 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2663
msgid "Bottom contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2665
msgid ""
"The vertical distance between the object top surface and the support "
"material interface. If set to zero, support_material_contact_distance will "
"be used for both top and bottom contact Z distances."
msgstr ""

#. TRN Print Settings: "Bottom contact Z distance". Have to be as short as possible
#. TRN Print Settings: "Bottom interface layers". Have to be as short as possible
#: src/libslic3r/PrintConfig.cpp:2671 src/libslic3r/PrintConfig.cpp:2752
msgid "Same as top"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2679
msgid "Enforce support for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2681
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2686
msgid "Enforce support for the first n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2692
msgid "Support material/raft/skirt extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2694
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2703
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2713
msgid "Interface loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2715
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2720
msgid "Support material/raft interface extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2722
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2729
msgid "Top interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2731
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2735 src/libslic3r/PrintConfig.cpp:2753
msgid "0 (off)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2736 src/libslic3r/PrintConfig.cpp:2754
msgid "1 (light)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2737 src/libslic3r/PrintConfig.cpp:2755
msgid "2 (default)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2738 src/libslic3r/PrintConfig.cpp:2756
msgid "3 (heavy)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2744
msgid "Bottom interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2746
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material. Set to -1 to use support_material_interface_layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2762
msgid "Closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2764
msgid ""
"For snug supports, the support regions will be merged using morphological "
"closing operation. Gaps smaller than the closing radius will be filled in."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2772
msgid "Interface pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2774
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2783
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2792
msgid "Pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2794
msgid "Pattern used to generate support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2797
msgid "Rectilinear grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2804
msgid "Interface pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2806
msgid ""
"Pattern used to generate support material interface. Default pattern for non-"
"soluble support interface is Rectilinear, while default pattern for soluble "
"support interface is Concentric."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2818
msgid "Pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2820
msgid "Spacing between support material lines."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2829
msgid "Speed for printing support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2838
msgid ""
"Style and shape of the support towers. Projecting the supports into a "
"regular grid will create more stable supports, while snug support towers "
"will save material and reduce object scarring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2843
msgid "Snug"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2844
msgid "Organic"
msgstr "Orgaaninen"

#: src/libslic3r/PrintConfig.cpp:2850
msgid "Synchronize with object layers"
msgstr ""

#. TRN PrintSettings : "Synchronize with object layers"
#: src/libslic3r/PrintConfig.cpp:2853
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive. This option "
"is only available when top contact Z distance is set to zero."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2860
msgid "Overhang threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2862
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2874
msgid "With sheath around the support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2876
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2882
msgid "Maximum Branch Angle"
msgstr "Maksimi oksan kulma"

#. TRN PrintSettings: "Organic supports" > "Maximum Branch Angle"
#: src/libslic3r/PrintConfig.cpp:2885
msgid ""
"The maximum angle of the branches, when the branches have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle to be able to have more reach."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2894
msgid "Preferred Branch Angle"
msgstr "Suosittu oksan kulma"

#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle"
#: src/libslic3r/PrintConfig.cpp:2897
msgid ""
"The preferred angle of the branches, when they do not have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle for branches to merge faster."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2906
msgid "Tip Diameter"
msgstr "Päädyn halkaisija"

#. TRN PrintSettings: "Organic supports" > "Tip Diameter"
#: src/libslic3r/PrintConfig.cpp:2909
msgid "Branch tip diameter for organic supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2917
msgid "Branch Diameter"
msgstr "Oksan alkaisija"

#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
#: src/libslic3r/PrintConfig.cpp:2920
msgid ""
"The diameter of the thinnest branches of organic support. Thicker branches "
"are more sturdy. Branches towards the base will be thicker than this."
msgstr ""

#. TRN PrintSettings: #lmFIXME
#: src/libslic3r/PrintConfig.cpp:2930
msgid "Branch Diameter Angle"
msgstr "Oksan halkaisijan kulma"

#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle"
#: src/libslic3r/PrintConfig.cpp:2933
msgid ""
"The angle of the branches' diameter as they gradually become thicker towards "
"the bottom. An angle of 0 will cause the branches to have uniform thickness "
"over their length. A bit of an angle can increase stability of the organic "
"support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2943
msgid "Branch Diameter with double walls"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
#: src/libslic3r/PrintConfig.cpp:2946
msgid ""
"Branches with area larger than the area of a circle of this diameter will be "
"printed with double walls for stability. Set this value to zero for no "
"double walls."
msgstr ""

#. TRN PrintSettings: #lmFIXME
#: src/libslic3r/PrintConfig.cpp:2959
msgid "Branch Distance"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Distance"
#: src/libslic3r/PrintConfig.cpp:2962
msgid ""
"How far apart the branches need to be when they touch the model. Making this "
"distance small will cause the tree support to touch the model at more "
"points, causing better overhang but making support harder to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2969
msgid "Branch Density"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Density"
#: src/libslic3r/PrintConfig.cpp:2972
msgid ""
"Adjusts the density of the support structure used to generate the tips of "
"the branches. A higher value results in better overhangs but the supports "
"are harder to remove, thus it is recommended to enable top support "
"interfaces instead of a high branch density value if dense interfaces are "
"needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2984
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2987
msgid "Nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2993
msgid "Thick bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2995
msgid ""
"If enabled, bridges are more reliable, can bridge longer distances, but may "
"look worse. If disabled, bridges look better but are reliable just for "
"shorter bridged distances."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3001
msgid "Detect thin walls"
msgstr "Ohuiden seinien tunnistus"

#: src/libslic3r/PrintConfig.cpp:3003
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3009
msgid "Threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3010
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3022
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
"and {next_extruder} can be used. When a tool-changing command which changes "
"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3035
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3048
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#. TRN Print Settings: "Top solid layers"
#: src/libslic3r/PrintConfig.cpp:3061 src/libslic3r/PrintConfig.cpp:3069
msgctxt "Layers"
msgid "Top"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3063
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3064
msgid "Top solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3071
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3074
msgid "Minimum top shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3081
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3089
msgid "Z travel"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3090
msgid ""
"Speed for movements along the Z axis.\n"
"When set to zero, the value is ignored and regular travel speed is used "
"instead."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3098
msgid "Use firmware retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3099
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3105
msgid "Use relative E distances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3106
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3112
msgid "Use volumetric E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3113
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3123
msgid "Enable variable layer height feature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3124
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3130
msgid "Wipe while retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3131
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3138
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3144
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3145
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3151
msgid "Purging volumes - matrix"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3152
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3161
msgid "Position X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3162
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3168
msgid "Position Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3169
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3175
msgid "Width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3176
msgid "Width of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3182
msgid "Wipe tower rotation angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3183
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3189 src/libslic3r/PrintConfig.cpp:3190
msgid "Wipe tower brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3197
msgid "Stabilization cone apex angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3198
msgid ""
"Angle at the apex of the cone that is used to stabilize the wipe tower. "
"Larger angle means wider base."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3207
msgid "Wipe tower purge lines spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3208
msgid "Spacing of purge lines on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3217
msgid "Wipe into this object's infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3218
msgid ""
"Purging after toolchange will be done inside this object's infills. This "
"lowers the amount of waste but may result in longer print time  due to "
"additional travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3225
msgid "Wipe into this object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3226
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3232
msgid "Maximal bridging distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3233
msgid "Maximal distance between supports on sparse infill sections."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3239
msgid "XY Size Compensation"
msgstr "XY-Kokokompensaatio"

#: src/libslic3r/PrintConfig.cpp:3241
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3249
msgid "Z offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3250
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3259
msgid "Perimeter generator"
msgstr "Kehägeneraattori"

#: src/libslic3r/PrintConfig.cpp:3261
msgid ""
"Classic perimeter generator produces perimeters with constant extrusion "
"width and for very thin areas is used gap-fill. Arachne engine produces "
"perimeters with variable extrusion width. This setting also affects the "
"Concentric infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3266
msgid "Classic"
msgstr "Klassinen"

#: src/libslic3r/PrintConfig.cpp:3267
msgid "Arachne"
msgstr "Arachne"

#: src/libslic3r/PrintConfig.cpp:3273
msgid "Perimeter transition length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3275
msgid ""
"When transitioning between different numbers of perimeters as the part "
"becomes thinner, a certain amount of space is allotted to split or join the "
"perimeter segments. If expressed as a percentage (for example 100%), it will "
"be computed based on the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3284
msgid "Perimeter transitioning filter margin"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3286
msgid ""
"Prevent transitioning back and forth between one extra perimeter and one "
"less. This margin extends the range of extrusion widths which follow to "
"[Minimum perimeter width - margin, 2 * Minimum perimeter width + margin]. "
"Increasing this margin reduces the number of transitions, which reduces the "
"number of extrusion starts/stops and travel time. However, large extrusion "
"width variation can lead to under- or overextrusion problems. If expressed "
"as a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3299
msgid "Perimeter transitioning threshold angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3301
msgid ""
"When to create transitions between even and odd numbers of perimeters. A "
"wedge shape with an angle greater than this setting will not have "
"transitions and no perimeters will be printed in the center to fill the "
"remaining space. Reducing this setting reduces the number and length of "
"these center perimeters, but may leave gaps or overextrude."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3312
msgid "Perimeter distribution count"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3314
msgid ""
"The number of perimeters, counted from the center, over which the variation "
"needs to be spread. Lower values mean that the outer perimeters don't change "
"in width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3321
msgid "Minimum feature size"
msgstr "Minimi ominaisuuden koko"

#: src/libslic3r/PrintConfig.cpp:3323
msgid ""
"Minimum thickness of thin features. Model features that are thinner than "
"this value will not be printed, while features thicker than the Minimum "
"feature size will be widened to the Minimum perimeter width. If expressed as "
"a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3333
msgid "Minimum perimeter width"
msgstr "Kehän minimi leveys"

#: src/libslic3r/PrintConfig.cpp:3335
msgid ""
"Width of the perimeter that will replace thin features (according to the "
"Minimum feature size) of the model. If the Minimum perimeter width is "
"thinner than the thickness of the feature, the perimeter will become as "
"thick as the feature itself. If expressed as a percentage (for example 85%), "
"it will be computed based on the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3401
msgid "Pinhead front diameter"
msgstr "Neulanpään etuhalkaisija"

#: src/libslic3r/PrintConfig.cpp:3403
msgid "Diameter of the pointing side of the head"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3410
msgid "Head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3412
msgid "How much the pinhead has to penetrate the model surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3419
msgid "Pinhead width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3421
msgid "Width from the back sphere center to the front sphere center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3429
msgid "Pillar diameter"
msgstr "Pilarin alkaisija"

#: src/libslic3r/PrintConfig.cpp:3431
msgid "Diameter in mm of the support pillars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3439
msgid "Small pillar diameter percent"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3441
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3450
msgid "Max bridges on a pillar"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3452
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3460
msgid "Max weight on model"
msgstr "Suurin paino mallissa"

#: src/libslic3r/PrintConfig.cpp:3463
msgid ""
"Maximum weight of sub-trees that terminate on the model instead of the print "
"bed. The weight is the sum of the lenghts of all branches emanating from the "
"endpoint."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3471
msgid "Pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3472
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3478
msgid "Zig-Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3478
msgid "Cross"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3478
msgid "Dynamic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3490
msgid "Pillar widening factor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3494
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase. The exact amount of "
"increase is unspecified and can change in the future."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3505
msgid "Support base diameter"
msgstr "Tukien pohjan halkaisija"

#: src/libslic3r/PrintConfig.cpp:3507
msgid "Diameter in mm of the pillar base"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3515
msgid "Support base height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3517
msgid "The height of the pillar base cone"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3524
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3527
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3537
msgid "Critical angle"
msgstr "Kriittinen kulma"

#: src/libslic3r/PrintConfig.cpp:3539
msgid "The default angle for connecting support sticks and junctions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3547
msgid "Max bridge length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3549
msgid "The max length of a bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3561
msgid "Max pillar linking distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3563
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3573
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3589
msgid "Display width"
msgstr "Näytön leveys"

#: src/libslic3r/PrintConfig.cpp:3590
msgid "Width of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3595
msgid "Display height"
msgstr "Näytön korkeus"

#: src/libslic3r/PrintConfig.cpp:3596
msgid "Height of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3601
msgid "Number of pixels in"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3603
msgid "Number of pixels in X"
msgstr "Pikseleiden määrä X akselissa"

#: src/libslic3r/PrintConfig.cpp:3609
msgid "Number of pixels in Y"
msgstr "Pikseleiden määrä Y akselissa"

#: src/libslic3r/PrintConfig.cpp:3614
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3615
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3616
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3621
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3622
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3623
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3628
msgid "Display orientation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3629
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3633
msgid "Landscape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3634
msgid "Portrait"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3640 src/libslic3r/PrintConfig.cpp:4136
msgid "Fast"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3641
msgid "Fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3642
msgid "Time of the fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3649 src/libslic3r/PrintConfig.cpp:4135
msgid "Slow"
msgstr "Hidas"

#: src/libslic3r/PrintConfig.cpp:3650
msgid "Slow tilt"
msgstr "Hidas kallistus"

#: src/libslic3r/PrintConfig.cpp:3651
msgid "Time of the slow tilt"
msgstr "Hitaan kallistuksen aika"

#: src/libslic3r/PrintConfig.cpp:3658 src/libslic3r/PrintConfig.cpp:4137
msgid "High viscosity"
msgstr "Korkea viskositeetti"

#: src/libslic3r/PrintConfig.cpp:3659
msgid "Tilt for high viscosity resin"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3660
msgid "Time of the super slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3667
msgid "Area fill"
msgstr "Aluetäyttö"

#: src/libslic3r/PrintConfig.cpp:3668
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3675 src/libslic3r/PrintConfig.cpp:3676
#: src/libslic3r/PrintConfig.cpp:3677
msgid "Printer scaling correction"
msgstr "Tulostimen skaalauksen korjaus"

#: src/libslic3r/PrintConfig.cpp:3683 src/libslic3r/PrintConfig.cpp:3685
msgid "Printer scaling correction in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3684
msgid "Printer scaling X axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3691 src/libslic3r/PrintConfig.cpp:3693
msgid "Printer scaling correction in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3692
msgid "Printer scaling Y axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3699 src/libslic3r/PrintConfig.cpp:3701
msgid "Printer scaling correction in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3700
msgid "Printer scaling Z axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3707 src/libslic3r/PrintConfig.cpp:3708
msgid "Printer absolute correction"
msgstr "Tulostimen absoluuttinen korjaus"

#: src/libslic3r/PrintConfig.cpp:3709
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3715
msgid "Elephant foot minimum width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3717
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3724 src/libslic3r/PrintConfig.cpp:3725
msgid "Printer gamma correction"
msgstr "Tulostimen gammakorjaus"

#: src/libslic3r/PrintConfig.cpp:3726
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3745 src/libslic3r/PrintConfig.cpp:3746
msgid "SLA material type"
msgstr "SLA materiaalin tyyppi"

#: src/libslic3r/PrintConfig.cpp:3753 src/libslic3r/PrintConfig.cpp:3754
msgid "Initial layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3760
msgid "Idle temperature"
msgstr "Tyhjäkäyntilämpötila"

#: src/libslic3r/PrintConfig.cpp:3761
msgid ""
"Nozzle temperature when the tool is currently not used in multi-tool setups."
"This is only used when 'Ooze prevention' is active in Print Settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3769 src/libslic3r/PrintConfig.cpp:3770
msgid "Bottle volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3771
msgid "ml"
msgstr "ml"

#: src/libslic3r/PrintConfig.cpp:3776 src/libslic3r/PrintConfig.cpp:3777
msgid "Bottle weight"
msgstr "Pullon paino"

#: src/libslic3r/PrintConfig.cpp:3778
msgid "kg"
msgstr "kg"

#: src/libslic3r/PrintConfig.cpp:3785
msgid "g/ml"
msgstr "g/ml"

#: src/libslic3r/PrintConfig.cpp:3792
msgid "money/bottle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3797
msgid "Faded layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3798
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3805 src/libslic3r/PrintConfig.cpp:3806
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3813 src/libslic3r/PrintConfig.cpp:3814
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3821 src/libslic3r/PrintConfig.cpp:3822
msgid "Exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3828 src/libslic3r/PrintConfig.cpp:3829
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3836 src/libslic3r/PrintConfig.cpp:3837
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3844 src/libslic3r/PrintConfig.cpp:3845
msgid "Initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3851 src/libslic3r/PrintConfig.cpp:3852
msgid "Correction for expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3858 src/libslic3r/PrintConfig.cpp:3859
msgid "Correction for expansion in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3865 src/libslic3r/PrintConfig.cpp:3866
msgid "Correction for expansion in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3872 src/libslic3r/PrintConfig.cpp:3873
msgid "Correction for expansion in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3879
msgid "SLA print material notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3880
msgid "You can put your notes regarding the SLA print material here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3894 src/libslic3r/PrintConfig.cpp:3905
msgid "Default SLA material profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3916
msgid "Generate supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3918
msgid "Generate supports for the models"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3923
msgid "Support tree type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3924
msgid "Support tree building strategy"
msgstr ""

#. TRN One of the "Support tree type"s on SLAPrintSettings : Supports
#: src/libslic3r/PrintConfig.cpp:3929
msgid "Branching (experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3938
msgid "Support only in enforced regions"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3940
msgid "Only create support if it lies in a support enforcer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3947
msgid "This is a relative measure of support points density."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3953
msgid "Minimal distance of the support points"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3955
msgid "No support points will be placed closer than this threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3961
msgid "Use pad"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3963
msgid "Add a pad underneath the supported model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3968
msgid "Pad wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3970
msgid "The thickness of the pad and its optional cavity walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3978
msgid "Pad wall height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3979
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3992
msgid "Pad brim size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3993
msgid "How far should the pad extend around the contained geometry"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4003
msgid "Max merge distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4005
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4025
msgid "Pad wall slope"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4027
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4038
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4043
msgid "Pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4045
msgid "Force pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4050
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4052
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4061
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4063
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4070
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4072
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4079
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4082
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4089
msgid "Enable hollowing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4091
msgid "Hollow out a model to have an empty interior"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4096
msgid "Wall thickness"
msgstr "Seinämäpaksuus"

#: src/libslic3r/PrintConfig.cpp:4098
msgid "Minimum wall thickness of a hollowed model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4106
msgid "Accuracy"
msgstr "Tarkkuus"

#: src/libslic3r/PrintConfig.cpp:4108
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4118
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4130
msgid "Print speed"
msgstr "Tulostusnopeus"

#: src/libslic3r/PrintConfig.cpp:4132
msgid ""
"A slower printing profile might be necessary when using materials with "
"higher viscosity or with some hollowed parts. It slows down the tilt "
"movement and adds a delay before exposure."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4143
msgid "Format of the output SLA archive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4148
msgid "SLA output precision"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4149
msgid "Minimum resolution in nanometers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4637
msgid "Export OBJ"
msgstr "Vie OBJ"

#: src/libslic3r/PrintConfig.cpp:4638
msgid "Export the model(s) as OBJ."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4649
msgid "Export SLA"
msgstr "Vie SLA"

#: src/libslic3r/PrintConfig.cpp:4650
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4655
msgid "Export 3MF"
msgstr "Vie 3MF"

#: src/libslic3r/PrintConfig.cpp:4656
msgid "Export the model(s) as 3MF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4660
msgid "Export AMF"
msgstr "Vie AMF"

#: src/libslic3r/PrintConfig.cpp:4661
msgid "Export the model(s) as AMF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4665
msgid "Export STL"
msgstr "Vie STL"

#: src/libslic3r/PrintConfig.cpp:4666
msgid "Export the model(s) as STL."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4671
msgid "Slice the model and export toolpaths as G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4676
msgid "G-code viewer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4677
msgid "Visualize an already sliced and saved G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4683
msgid "OpenGL version"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4684
msgid "Select a specific version of OpenGL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4689
msgid "OpenGL debug output"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4690
msgid "Activate OpenGL debug output on graphic cards which support it"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4696
msgid "Slice"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4697
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4702
msgid "Help"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4703
msgid "Show this help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4708
msgid "Help (FFF options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4709
msgid "Show the full list of print/G-code configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4713
msgid "Help (SLA options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4714
msgid "Show the full list of SLA print configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4718
msgid "Output Model Info"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4719
msgid "Write information about the model to the console."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4723
msgid "Save config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4724
msgid "Save configuration to the specified file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4734
msgid "Align XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4735
msgid "Align the model to the given point."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4740
msgid "Cut model at the given Z."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4762
msgid "Center the print around the given center."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4766
msgid "Don't arrange"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4767
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4770
msgid "Ensure on bed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4771
msgid ""
"Lift the object above the bed when it is partially below. Enabled by "
"default, use --no-ensure-on-bed to disable."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4775
msgid "Duplicate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4776
msgid "Multiply copies by this factor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4780
msgid "Duplicate by grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4781
msgid "Multiply copies by creating a grid."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4785
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4790
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4794
msgid "Rotation angle around the Z axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4798
msgid "Rotate around X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4799
msgid "Rotation angle around the X axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4803
msgid "Rotate around Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4804
msgid "Rotation angle around the Y axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4809
msgid "Scaling factor or percentage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4814
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4817
msgid "Scale to Fit"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4818
msgid "Scale to fit the given volume."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4822
msgid "Delete files after loading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4823
msgid "Delete files after loading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4831
msgid "Ignore non-existent config files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4832
msgid "Do not fail if a file supplied to --load does not exist."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4835
msgid ""
"Forward-compatibility rule when loading configurations from config files and "
"project files (3MF, AMF)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4836
msgid ""
"This version of PrusaSlicer may not understand configurations produced by "
"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
"the list of supported firmware flavors. One may decide to bail out or to "
"substitute an unknown value with a default silently or verbosely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4840
msgid "Bail out on unknown configuration values"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4841
msgid ""
"Enable reading unknown configuration values by verbosely substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4842
msgid ""
"Enable reading unknown configuration values by silently substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4847
msgid "Load config file"
msgstr "Lataa konfiguraatiotiedosto"

#: src/libslic3r/PrintConfig.cpp:4848
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4851
msgid "Output File"
msgstr "Tuotettu tiedosto"

#: src/libslic3r/PrintConfig.cpp:4852
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4856
msgid "Single instance mode"
msgstr "Yhden ilmentymän tila"

#: src/libslic3r/PrintConfig.cpp:4857
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4862
msgid "Data directory"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4863
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4866
msgid "Logging level"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4867
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4873
msgid "Render with a software renderer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4874
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""

#: src/libslic3r/Zipper.cpp:23
msgid "Error with ZIP archive"
msgstr "Virhe ZIP-arkiston kanssa"

#: src/libslic3r/PrintObject.cpp:169
msgid "Generating perimeters"
msgstr "Luodaan kehiä"

#: src/libslic3r/PrintObject.cpp:276
msgid "Preparing infill"
msgstr "Valmistellaan täyttöä"

#. TRN Status for the Print calculation
#: src/libslic3r/PrintObject.cpp:422
msgid "Making infill"
msgstr "Tehdään täyttöä"

#: src/libslic3r/PrintObject.cpp:471
msgid "Searching support spots"
msgstr "Etsitään tukipisteitä"

#: src/libslic3r/PrintObject.cpp:496
msgid "Generating support material"
msgstr "Luodaan tukimateriaalia"

#: src/libslic3r/PrintObject.cpp:519
msgid "Estimating curled extrusions"
msgstr ""

#: src/libslic3r/PrintObjectSlice.cpp:500
msgid "Processing triangulated mesh"
msgstr "Prosessoidaan kolmioitua verkkoa"

#: src/libslic3r/PrintObjectSlice.cpp:734
msgid ""
"An object has enabled XY Size compensation which will not be used because it "
"is also multi-material painted.\n"
"XY Size compensation cannot be combined with multi-material painting."
msgstr ""

#: resources/data/hints.ini: [hint:Fuzzy skin]
msgid ""
"Fuzzy skin\n"
"Did you know that you can create rough fibre-like texture on the sides of "
"your models using the<a>Fuzzy skin</a>feature? You can also use modifiers to "
"apply fuzzy-skin only to a portion of your model."
msgstr ""

#: resources/data/hints.ini: [hint:Shapes gallery]
msgid ""
"Shapes gallery\n"
"Did you know that PrusaSlicer has a Shapes Gallery? You can use the included "
"models as modifiers, negative volumes or as printable objects. Right-click "
"the platter and select<a>Add Shape - Gallery</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Arrange settings]
msgid ""
"Arrange settings\n"
"Did you know that you can right-click the<a>Arrange icon</a>to adjust the "
"size of the gap between objects and to allow automatic rotations?"
msgstr ""

#: resources/data/hints.ini: [hint:Negative volume]
msgid ""
"Negative volume\n"
"Did you know that you can subtract one mesh from another using the Negative "
"volume modifier? That way you can, for example, create easily resizable "
"holes directly in PrusaSlicer. Read more in the documentation. (Requires "
"Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Simplify mesh]
msgid ""
"Simplify mesh\n"
"Did you know that you can reduce the number of triangles in a mesh using the "
"Simplify mesh feature? Right-click the model and select Simplify model. Read "
"more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Reload from disk]
msgid ""
"Reload from disk\n"
"Did you know that if you created a newer version of your model, you can "
"simply reload it in PrusaSlicer? Right-click the model in the 3D view and "
"choose Reload from disk. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Hiding sidebar]
msgid ""
"Hiding sidebar\n"
"Did you know that you can hide the right sidebar using the shortcut "
"<b>Shift+Tab</b>? You can also enable the icon for this from "
"the<a>Preferences</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Perspective camera]
msgid ""
"Perspective camera\n"
"Did you know that you can use the <b>K</b> key to quickly switch between an "
"orthographic and perspective camera?"
msgstr ""

#: resources/data/hints.ini: [hint:Camera Views]
msgid ""
"Camera Views\n"
"Did you know that you can use the number keys <b>0-6</b> to quickly switch "
"between predefined camera angles?"
msgstr ""

#: resources/data/hints.ini: [hint:Place on face]
msgid ""
"Place on face\n"
"Did you know that you can quickly orient a model so that one of its faces "
"sits on the print bed? Select the<a>Place on face</a>function or press the "
"<b>F</b> key."
msgstr ""

#: resources/data/hints.ini: [hint:Set number of instances]
msgid ""
"Set number of instances\n"
"Did you know that you can right-click a model and set an exact number of "
"instances instead of copy-pasting it several times?"
msgstr ""

#: resources/data/hints.ini: [hint:Combine infill]
msgid ""
"Combine infill\n"
"Did you know that you can print the infill with a higher layer height "
"compared to perimeters to save print time using the setting<a>Combine infill "
"every</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Variable layer height]
msgid ""
"Variable layer height\n"
"Did you know that you can print different regions of your model with a "
"different layer height and smooth the transitions between them? Try "
"the<a>Variable layer height tool</a>. (Not available for SLA printers.)"
msgstr ""

#: resources/data/hints.ini: [hint:Undo/redo history]
msgid ""
"Undo/redo history\n"
"Did you know that you can right-click the<a>undo/redo arrows</a>to see the "
"history of changes and to undo or redo several actions at once?"
msgstr ""

#: resources/data/hints.ini: [hint:Different layer height for each model]
msgid ""
"Different layer height for each model\n"
"Did you know that you can print each model on the plater with a different "
"layer height? Right-click the model in the 3D view, choose Layers and "
"Perimeters and adjust the values in the right panel. Read more in the "
"documentation."
msgstr ""
"Eri kerroskorkeudet jokaiselle mallille\n"
"Tiesitkö, että voit tulostaa jokaisen mallin tulostusalalla eri "
"kerroskorkeudella? Paina hiiren oikealla painikkeella 3d-näkymässä, valitse "
"kerrokset ja kehät ja säädä arvoja oikeassa paneelissa. Lue lisää "
"dokumentaatiosta."

#: resources/data/hints.ini: [hint:Solid infill threshold area]
msgid ""
"Solid infill threshold area\n"
"Did you know that you can make parts of your model with a small cross-"
"section be filled with solid infill automatically? Set the<a>Solid infill "
"threshold area</a>. (Expert mode only.)"
msgstr ""

#: resources/data/hints.ini: [hint:Search functionality]
msgid ""
"Search functionality\n"
"Did you know that you use the<a>Search</a>tool to quickly find a specific "
"PrusaSlicer setting? Or use the familiar shortcut <b>Ctrl+F</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Box selection]
msgid ""
"Box selection\n"
"Did you know that you can do a box selection with Shift+Mouse drag? You can "
"also box-deselect objects with <b>Alt+Mouse drag</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Zoom on selected objects or all if none
#: selected]
msgid ""
"Zoom on selected objects or on all objects if none selected\n"
"Did you know that you can zoom in on selected objects by pressing the <b>Z</"
"b> key? If none are selected, the camera will zoom on all objects in the "
"scene."
msgstr ""

#: resources/data/hints.ini: [hint:Printable toggle]
msgid ""
"Printable toggle\n"
"Did you know that you can disable the G-code generation for the selected "
"model without having to move or delete it? Toggle the Printable property of "
"a model from the Right-click context menu."
msgstr ""

#: resources/data/hints.ini: [hint:Mirror]
msgid ""
"Mirror\n"
"Did you know that you can mirror the selected model to create a reversed "
"version of it? Right-click the model, select Mirror and pick the mirror axis."
msgstr ""

#: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45
#: degrees]
msgid ""
"PageUp / PageDown quick rotation by 45 degrees\n"
"Did you know that you can quickly rotate selected models by 45 degrees "
"around the Z-axis clockwise or counter-clockwise by pressing <b>Page Up</b> "
"or <b>Page Down</b> respectively?"
msgstr ""

#: resources/data/hints.ini: [hint:Load config from G-code]
msgid ""
"Load config from G-code\n"
"Did you know that you can use File-Import-Import Config to load print, "
"filament and printer profiles from an existing G-code file? Similarly, you "
"can use File-Import-Import SL1 / SL1S archive, which also lets you "
"reconstruct 3D models from the voxel data."
msgstr ""

#: resources/data/hints.ini: [hint:Ironing]
msgid ""
"Ironing\n"
"Did you know that you can smooth top surfaces of prints using Ironing? The "
"nozzle will run a special second infill phase at the same layer to fill in "
"holes and flatten any lifted plastic. Read more in the documentation. "
"(Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on supports]
msgid ""
"Paint-on supports\n"
"Did you know that you can paint directly on the object and select areas, "
"where supports should be enforced or blocked? Try the<a>Paint-on supports</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on seam]
msgid ""
"Paint-on seam\n"
"Did you know that you can paint directly on the object and select where to "
"place the start/endpoint of each perimeter loop? Try the<a>Seam painting</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Insert Pause]
msgid ""
"Insert Pause\n"
"Did you know that you can schedule the print to pause at a specific layer? "
"Right-click the layer slider in the Preview and select Add pause print "
"(M601). This can be used to insert magnets, weights or nuts into your "
"prints. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Insert Custom G-code]
msgid ""
"Insert Custom G-code\n"
"Did you know that you can insert a custom G-code at a specific layer? Left-"
"click the layer in the Preview, Right-click the plus icon and select Add "
"custom G-code. With this function you can, for example, create a temperature "
"tower. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Configuration snapshots]
msgid ""
"Configuration snapshots\n"
"Did you know that you can roll back to a complete backup of all system and "
"user profiles? You can view and move back and forth between snapshots using "
"the Configuration - <a>Configuration snapshots menu</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Minimum shell thickness]
msgid ""
"Minimum shell thickness\n"
"Did you know that instead of the number of top and bottom layers, you can "
"define the<a>Minimum shell thickness</a>in millimeters? This feature is "
"especially useful when using the variable layer height function."
msgstr ""

#: resources/data/hints.ini: [hint:Settings in non-modal window]
msgid ""
"Settings in non-modal window\n"
"Did you know that you can open the Settings in a new non-modal window? This "
"means you can have settings open on one screen and the G-code Preview on the "
"other. Go to the<a>Preferences</a>and select Settings in non-modal window."
msgstr ""

#: resources/data/hints.ini: [hint:Adaptive infills]
msgid ""
"Adaptive infills\n"
"Did you know that you can use the Adaptive cubic and Support cubic infills "
"to decrease the print time and lower the filament consumption? Read more in "
"the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Lightning infill]
msgid ""
"Lightning infill\n"
"Did you know that you can use the Lightning infill to support only the top "
"surfaces, save a lot of the filament, and decrease the print time? Read more "
"in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Fullscreen mode]
msgid ""
"Fullscreen mode\n"
"Did you know that you can switch PrusaSlicer to fullscreen mode? Use the "
"<b>F11</b> hotkey."
msgstr ""

#: resources/data/hints.ini: [hint:Printables integration]
msgid ""
"Printables.com integration\n"
"Did you know that when you are browsing Printables.com, you can send 3D "
"model files to PrusaSlicer with a single click? Learn more in the "
"documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Cut tool]
msgid ""
"Cut tool\n"
"Did you know that you can cut a model at any angle and even create aligning "
"pins with the updated <a>Cut tool</a>? Learn more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Measurement tool]
msgid ""
"Measurement tool\n"
"Did you know that you can <a>measure</a> the distances between points, edges "
"and planes, the radius of a hole or the angle between edges or planes? Learn "
"more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Text tool]
msgid ""
"Text tool\n"
"Did you know that you can add custom text labels to your models or even use "
"the text as a modifier? Learn more in the documentation."
msgstr ""